Home

Philips 64PH9901 Projection Television User Manual

1. EXIT MORE 1 0F 2 7 as MONO AT ALL TIMES STEREO IF AVAILABLE SECOND PROGRAM SOUND CAN ONLY BE SELECTED 14 WHEN SAP INFORMATION IS PRESENT ON THE CURRENT CHANNEL OS A A A AAs SECOND AUDIO PROGRAM A L y A NORMAL SOUND SECOND PROGRAM SOUND je aol NTSC ANALOG SOUND MENU CONTROLS DISPLAY VOLUME Jse the DISPLAY VOLUME control to see program volume level settings on the DPTV screen Once set the Volume Display will be seen each time the VOLUME buttons on the DPTV NTSC local keyboard or Pronto remote are pressed ANALOG MAIN MENU vda lada PICTURE gt Fsounp lt SOUND MENU lt T gt Select DISPLAY VOLUME N gass REL control ss BALANCE STEREO 1ST TIME SETUP AS A eS A A A With SOUND MENU on screen PERAL VOTE E ail move the RED highlight with the EXIT MORE MENU M ed buttons Then press the MENU button lt 2 gt Press the MENU AY and MENU M buttons to highlight and turn ON 14 the DISPLAY VOLUME control ISPLAY VOL S gt Press the exit
2. EXIT MORE 10F2 Press the lt or gt arrow buttons to adjust the selected control Ss Press the exit button to clear the screen y lt SMART HELP settings are at normal mid range levels when the bar scale is lt P gt Select and then press MENU y PHILIPS M button to view additional centered y a controls grouped under same feature heading For COLOR Press or to add or Example Tint Brightness eliminate color Picture etc Remember control Z BRIGHTNESS Press or until dark parts of the picture show good detail SHARPNESS Press or to improve detail in the picture TINT Press or to obtain natural skin tones HOW TO SELECT MENU FEATURES PICTURE Press or until WITH BUTTONS ON THE PRONTO REMOTE PAGE 4 4 ANALOG TV MODE whitest parts of the picture are as bright as you prefer Press Left Right lt q gt Arrow buttons to move from Side to Side within the Menu Press MENU or M to select RED highlighted feature Press Up Down Arrow buttons A Y to move Up and Down within the Menu ie aol NTSC ANALOG PICTURE MENU CONTROLS CLEARVIEW learview is a sharpness feature which smoothes out background snow or picture noise without losing picture image detail or crispness NTSC
3. lt 4 gt Turn the VCR ON and press PLAY to view the tape playback on the DPTV SMART HELP VCR If you have a single monaural Audio Output VCR Y connectors are available to complete your connection Contact your dealer or our Parts Information Center 1 800 292 6066 to order any optional accessories PHILIPS Remember connections 2 and use of the DPTV s AUX 2 Audio Video Input jacks are the same as for the AUX 1 jacks except AUX 2 is selected as the Input Source in step 3 24 AUDIO VIDEO NTSC ANALOG CONNECTIONS AUX 3 INPUTS FF more convenient Direct playback connections the DPTV s Front Audio Video Input panel can be used Located on the DPTV s right front side panel these Input jacks allow for quick and easy connections particularly for the playback of Camcorder tape recordings To view the playback of a Camcorder recording using the AUX3 Analog Audio Video Input Jacks BEGIN lt T gt Connect the VIDEO OUT jack from the Camcorder to the AUX3 VIDEO IN jack on the DPTV Connect the AUDIO OUT jacks RGght and L eft from the Camcorder to the AUX3 AUDIO IN jacks on the DPTV SZ Press the ext input button on the Pronto or the Source button on the DPTV s local keyboard to select the AUX3 Audio Video Inputs on the right side of the DPTV L Turn the Camcorder ON and press PLAY to view the tape on the DPTV D
4. ada Sur De FEATURES y 1 ota TE ya 1ST TIME SETUP R S 2057 PHILIPS _ DISPLAY quo aol FEATURE MENU SMART PICTURE CLOSED CAPTION EXIT FEATURE MENU SET CHANNEL CLOCK LABELS Valls 7 CHANNEL EXIT MORE 2 OF 2 LM UY CHANNEL DISPLAY A CHANNEL DISPLAY OPTIONS NTSC ANALOG FEATURE MENU CONTROLS CHANNEL LABELS Dp you ever have trouble remembering on which channel a particular station or network is located The Channel Labels Control is a quick way to pun nol NTSC FEATURE MENU 35 N view and select channels from a SET gt CHANNEL CLOCK list of Labeled channels Labels TT ry CHANNEL A Label is a four letter callout you DISPLAY can set to appear with the on EXIT screen channel number Example Label WXYZ for a TV station s call letters HAN BELS Create Your Own MANUAL To create station labels using the Channel Labels Control Choose From List PRESETS BEGIN EXIT Select CHANNEL LABELS control With th
5. Subwoofer REAR OF DPTV Speaker powered Suggested or equivalent optional Surround Mode Surround subwoofer z Treble speakers for a IZ Auto Volume compressed use i 7 Back e Velodyne VAIC120 12 120W e Infinity INI BU120 12 120W e JBL PSWD110 10 100W Sound Menu Front External Front External Speaker Speaker 25W 8Q Min 25W 8Q Min e Left Right Front External speakers can be used in substitution for the DPTV internal cabinet speakers if desired See the Front Speakers Switch note in the section to the left for an explanation Subwoofer speaker connections are available on the rear of the alee DPTV for either powered or non powered types of optional gt P a Subwoofer speakers Contact your Philips dealer for further details IWE MIA on Dolby Digital Surround Sound system speakers and their use A 5 Ask your dealer about subwoofer and surround sound speakers suggested for use with your your TV Rear Surround Rear Surround Speaker Speaker 33 E ATSC DIGITAL SOUND MENU CONTROLS DOLBY DIGITAL SURROUND ADDITIONAL CONNECTIONS Center Channel Input terminal is also located on the rear of the DPTV for additional Dolby Digital Surround sound connection options This input can be used to connect an external Dolby Digital or Home Theater Surround Sound capable Amplifier with Center Channel output in orde
6. BEGIN ANALOG MAIN MENU II lt T gt Select CLEARVIEW control Picture sw PITT FEATURES With the PICTURE MENU on screen move the RED highlight with the MENU M 42 buttons Then press the MENU button y CLEARVIEW a OA MORE lt 2 gt Press the MENU AV buttons 1 OF 2 to move the RED highlight Press the MENU button to select 14 the ENHANCED mode 1ST TIME SETUP TINT lt 3 gt Press the exit button to clear the screen 7 y volume NORMAL 7 ENHANCED PHILIPS NTSC ANALOG PICTURE MENU CONTROLS RED BLUE CONVERGENCE lonvergence is the correct lining up of the red and blue light paths on the DPTV screen NOTE If no color fringing see Smart Help shows then no Convergence adjustments are necessary BEGIN lt I gt Select CONVERGENCE control With PICTURE MENU 2 of 2 on screen move the RED highlight with the MENU M 4 buttons Then press the MENU button lt 2 gt Press the MENU AV buttons to select either the Red or Blue Convergence control press the MENU button to continue SJ Press the MENU 42 buttons to move the selected red or blue convergence cross directly over the white cross on the DPTV screen The
7. PICTURE AND SOUND FROM PLAYBACK OF CAMCORDER TAPE FRONT AUDIO VIDEO JACKS AUX3 Inputs located on right front side panel of DPTV AUDIO IN RED WHITE VIDEO IN YELLOW AUDIO VIDEO OUTPUT JACKS ON CAMCORDER PHILIPS CAMCORDER If you have a single monaural Audio Output Camcorder Y connectors are available to complete your connection Contact your dealer or our Parts Information Center 1 800 292 6066 to order any optional accessories 25 AUDIO VIDEO NTSC ANALOG CONNECTIONS AUXI S VIDEO INPUTS he S uper Video connections on the rear of the DPTV offer improved picture detail and clarity for the playback of S VHS VCR tapes or DVDs over a standard composite video input connection Note The VCR or DVD Player must have a S VIDEO OUT put Jack in order for you to complete the connections shown on this page BEGIN lt T gt Connect the S VIDEO S Lae OUT jack from the VCR to the AUX1 S VIDEO input plug on the DPTV The S VIDEO connecting cable will be supplied with the S VHS VCR or DVD Player lt 2 gt Connect the AUDIO OUT Ca R ght and L eft from the S VIDEO VCR to the AUX1 AUDIO input jacks on the DPTV lt 3 gt Press the ext input button on the Pronto or the Source button on the DPTV s local keyboard to select the S VIDEO input on the DPTV Note The S VIDEO picture source option appears only when a S VIDE
8. Programming which downloads NTSC channel program information including on screen program summaries and sorts by viewing preference categories sports movies etc Microchip storage capacity and channel availability determine volume of downloaded data Pronto Remote Control universal learn remote which controls virtually all IR devices learns new commands as your system expands and can be customized according to your personal preferences Featuring a large LCD backlit touchscreen the Pronto gives you easy access to all key DPTV features Dolby Digital Sound for multichannel sound reproduction at its best Fully compatible DPTV audio system will replay a received Dolby Digital 5 1 sound source through internal system amplification or function within a home theater sound system Manufactured under license from Dolby DO DOLBY Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby DIGITAL Laboratories Confidential Unpublished Works 1992 1997 Dolby Laboratories Inc All rights reserved Audio Video Connections for external sources and home theater equipment to provide the ultimate in flexibility In addition to separate NTSC ATSC antenna inputs connections include inputs formatted for S Video composite video Left Right audio six channel audio directly to internal amplifiers External Center Channel Audio Amplifier Inputs VGA and High Definition component video Outp
9. map currently held in memory The add new channels Auto Program option allows you to retain the current DPTV channel scan memory map and include only the new digital channel stations as they become available for selection DTV Main Menu Picture Sound Speakers Features DTV Setup Exit Program and System Information PSIP Standards were devised as part of the ATSC system to allow TV stations to transmit Program Service Information Protocol or PSIP for DTV channels This information system would allow stations to broadcast various electronic on screen program guides in order to inform digital TV viewers of station channel locations and availability of programs Not all initial digital broadcast programs contain or will be available with the PSIP program guides The 64PP9901 DPTV provides two separate Full Installation digital channel autoprogramming options based on whether PSIP information is present or not You may want to initially use the Install Without Program and System Info option in order to display and program the DTV channels and avoid any difficulties in first time setup or autoprogramming of the DPTV Press the Pronto remote s DTV or the Source button on the DPTV s local keyboard to select the ATSC operating mode 29 DTV Setup d you like to program DTV channels process may take several minutes add new
10. Instructions for use Lote make things bett PHILIPS Return your Warranty Registration card today to ensure you receive all the benefits you re entitled to Once your PHILIPS purchase is registered you re eligible to receive all the privileges of owning a PHILIPS product So complete and return the Warranty Registration Card enclosed with your purchase at once And take advantage of these important benefits Warranty Owner Model Verification Confirmation Registration Registering your product within Your completed Warranty Returning your Warranty 10 days confirms your right to Registration Card serves as Registration Card right away maximum protection under the verification of ownership in the guarantees you ll receive all terms and conditions of your event of product theft or loss the information and special PHILIPS warranty offers which you qualify for as the owner of your model C lati hase STE and welcome to the family PHILIPS Dear PHILIPS product owner Thank you for your confidence in PHILIPS You ve selected one of the best built best backed products available today And we ll do everything in our power to keep you happy with your purchase for many years to come As a member of the PHILIPS family you re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry What s more your purchase guarantees you ll receive all the
11. Philips Factory Service of East Tennessee 6700 D Papermill Rd Knoxville TN 37919 423 584 6614 MID ATLANTIC Philips Factory Service Mid Atlantic 352 Dunks Ferry Rd Bensalem PA 19020 215 638 7500 MAC2929 12 98 LIMITED WARRANTY DIGITAL PROJECTION TELEVISION O ne Y ear Free Labor One Y ear Free Service on Parts Two Years Free Service on Cathode Ray Tube Parts 30 days Free Service on Projection TV Screen This product can be repaired in home WHO IS COVERED You must have proof of purchase to receive warranty service A sales receipt or other document showing that you purchased the product is considered proof of purchase WHAT IS COVERED W arranty coverage begins the day you buy your product for one year thereafter 30 days for the digital projection TV screen all parts will be repaired or replaced and labor and transportation are free From one to two years from the day of purchase you pay for the replacement or repair of all parts except the cathode ray tube and the Clear Vu lens and for all labor and transportation charges After two years from the day of purchase you pay for the replacement or repair of all parts except the Clear Vu lens which is guaranteed against manufacturer s defects for the life of the product and for all labor and transportation charges All parts including repaired and replaced parts are covered only for the original warranty period W hen the warranty on the pr
12. DISPLAY SZ Press the exit button to set the clock in operation and clear the e a J ES screen y EXIT Dy WS I lt SMART HELP Remember be sure to press 0 first and then the hour number for single digit entries PLEASE ENTER THE The remote s MENU M de CURRENT HOUR buttons can also be used to set the hours minutes and AM PM portions of the clock DPTV Clock settings may be lost when the unit is unplugged or AC power to the set is interrupted ser CLocK Ai 9 19 AM PLEASE USE A or y TO SET AM PM NTSC ANALOG FEATURE MENU CONTROLS CHANNEL DISPLAY WwW the Channel Display control you can change the size and location of the on screen channel and clock information lt T gt Select CHANNEL DISPLAY control With FEATURES MENU 2 of 2 on screen move the RED highlight with the MENU M e buttons Then press the MENU button Q gt Press the MENU AY and MENU M buttons to highlight and select 14 the LARGE or SMALL display control lt 3 gt Press the exit button to clear the screen SMART HELP Try it out Press the z CHANNEL AY buttons and you should see the Display Size you selected Remember the SMALL SIZE display shows only the channel number not the time or clock NTSC ANALOG MAIN MENU PICTURE SOUND
13. 5 6 Glossary DP UV Testi 45 Guide Plus IR Blaster 0 coouacorsani isa Q U 2 High Definition Component Inputs 41 42 Q U 2 7 Inputs Audio and Video cooonoccnocccionacicccnnnnon 24 26 33 34 41 Menta Q U 2 4 6 7 Men Arrow Buttons s cc ccscccsteccesciccecsevevsebeesexeuseeovs Q U 4 6 7 Monitor Controls ui ia 42 Q U 2 7 Programming Channels c cesccesteceeeeeseeenees 6 29 Q U 2 Pronto Remote Control 23 40 Q U 3 4 6 7 ReqUestina SerViCO iii 43 46 47 48 Safety Precautions ocoooccocononcononcconrnnsnoronnenon nens 2 3 44 Q U 1 Second Audio Program SAP cooncccnncccocccnonnnonncnoncnonnnnnncconcn ns 20 Sensor Remote iria is Q U 2 Sleep Me ita aiii 23 40 Smart PACH iii iaa 10 11 SPDIF do pitan us 34 Q U 2 Speaker Switches seenioride 33 34 36 Q U 2 Status BUttO ii 23 40 SUMOUNG Sund senienas 32 33 34 36 37 SVGA soir ieo e inoen e Ea o EErEE 41 42 Q U 2 7 System Audio Outer iidseid ni 28 34 Q U 2 Time Chan el Display icon 17 Q U 2 VCOR DPTY Connections escocia 24 27 Lips TON SOPVICE sisirin onenei ra ar sdeasiey 43 46 47 A IS 19 35 42 MGA orra tees eg EA 41 42 Q U 7 Volume Display cuisine reseca 21 Volume Lite oran did ai 22 35 Waranty ins A ARS 48 Information contained in DPTV Quick Use Q U Guide page listed Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the l
14. ATSC DIGITAL FEATURES MENU CONTROLS CAPTIONS FORMAT LL Captions Format control is used to set the DPTV to receive the ATSC mode Closed Caption CC feature ATSC Closed Caption presents the viewer with program dialogue and conversations as written on screen text box windows DTV Main Menu Picture BEGIN Sound Speakers lt D Select the ATSC Features Features Menu DTV Setup Features Menu Ext Captions Format Caption 1 With the DTV Main Menu on eae screen move the highlight with the MENU M AY buttons Then press the MENU button Back Note The added resolution of active scan lines for DTV 720p or 1080i broadcasts as opposed to analog lt 2 gt Press the Menu AV arrow A E NTSC TV 525 can also provide for more defined o Closed Caption system character fonts and objects buttons to select the Captions The ATSC display window for CC may be more on Format control the level of a computer with text windows containing a variety of colors size and other object attributes lt 3 gt Press the Menu M gt arrow buttons buttons to select the desired Closed Caption format mode Captions 1 2 3 4 and Text Y 1 2 3 4 modes are available for A pros ED Ow selection Features Menu Note As in the NTSC system not purities Captions Format Caption 1 all CC modes will currently be eens A capos OV f ra Mute active or available for all program sele
15. DPTV for dedicated ATSC mode features as well as perform on screen Menu adjustments and select other program functions Note For battery installation and other details on the initial use of the Pronto remote control also refer to the 64PP9901 Quick Use guide included with your DPTV BEGIN lt D Gently tap the Pronto touchscreen with your finger to display its control panel for use Be sure TV is selected for the current device tab item category Press the DTV button on the Pronto to ensure ATSC mode commands are sent from the remote SMART HELP Due to the amount of optional component and feature uses available with the Pronto s Device Reference and Learn Code lists please also refer to the separate full use Pronto Owner s Manual for complete details on its function and operations alternate audio Press to cycle through the available audio language tracks for the current DTV program See the additional alternate audio section information shown below ower button Press to turn the DPTV ON and OFF sleep button Press to set the DPTV to automatically turn itself OFF 15 minutes to 2 hours ahead A CH button Press Alternate Channel A CH to select previously viewed channels Enter the desired two channel numbers from the Pronto remote s number buttons and then press A CH to toggle back and forth between the two channel selections menu e buttons nd status bu
16. The appliance does not appear to operate normally or exhibits a marked change in performance or E The appliance has been dropped or the enclosure damaged Servicing The user should not attempt to service the appliance beyond that described in the operating instructions All other servicing should be referred to qualified service personnel Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS Nec SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM nec ART 250 PART H TABLE OF CONTENTS WAS Getting Started US Welcome Product Registration Safety Precautions Table of Contents Features Model and Cabinet Information as NTSC Analog On Screen Menu Features FIRST TIME SETUP lt gt Automatic Programming of local NTSC Channels and other Control Features PICTURE MENU lt gt Adjusting Color Brightness Sharpness Tint and Picture Controls lt gt Using the Clearview Control lt Adjusting the DPTV s Convergence Control FEATURES MENU Setting the Smart Picture Controls Setting the DPTV for
17. contain anti static cleaners and cloths designed to get into the ridges of the DPTV screen If interested ask your dealer or call our toll free Accessory Parts ordering number 1 800 292 6066 43 eX Add Delete Channels 6 14 15 29 39 Q U 2 5 6 Audio Contolera 19 22 35 37 Q U 2 4 5 6 7 Audio Video Inputs ooconooccnnnnnn 24 26 33 34 41 Q U 2 7 Automatic Programming cccoocccoccnoncnonnncnoncnnnenon 6 29 Q U 5 6 Auxiliarty Inputs s es 24 26 33 34 41 Q U 2 7 AVL Automatic Volume Limiter cocconoconcnnononccnnonononananonono 22 Balacera 19 35 42 Dres oia 19 35 42 Battery Installation oooononnnnnnnnininnnnonnnonconcrnncnnccnncnnnnononos Q U 3 Cable TV Connections SettingsS oooonocccccccnnncnnncnns 13 Q U 5 6 Channel Time Display oooconncnnnnincnicnnccnnnnnannnancnncnnnos 17 Q U 6 Channel Mem ory ve ssccisecsseserecisssceetvebatieveceetonvesecs 13 14 Q U 2 Channel Label oli 18 Cleaning and Cartoon aia 43 Q U 3 Cl iia 8 Clock Seven acia rel 6 16 Closed Captioning iis scccdsseseccesseotssesenedonsezanee 12 38 Q U 5 6 Color Controls ui 7 30 Q U 5 6 7 CONVERGENCE sirenita oi 9 31 Q U 5 Controls DPT V nit Q U 2 4 6 Controls Remote occccccnncninnnnnnnnnnananonon 23 40 Q U 3 4 6 7 Dolby Digital ainia 5 33 34 36 Q U 1 2 8 EX rinda ii ade Q U 2 4 6 EME a 5 Q U 1 First Time Set Up ocoocococcnocononcninccnoncnonnncnncconnnon 6 29 Q U
18. customer controls are not covered under your warranty CAUTION A video source such as a video game Compact Disc Interactive CDI or TV information channel which shows a constant non moving pattern on the DPTV screen can cause picture tube damage When your DPTV is continuously used with such a source the pattern of the non moving portion of the game CDI etc could leave an image permanently on the picture tube When not in use turn the video source OFF Regularly alternate the use of such video sources with normal DPTV viewing Check the DPTV power cord Unplug the DPTV wait 1 minute for the unit to reset No Power then reinsert plug into outlet and push POWER button again Check to be sure power outlet is not on a wall switch Check for proper ATSC or NTSC antenna connections on the rear of the DPTV Are No Picture or they properly secured to the appropriate antenna plug on the DPTV ETA For ATSC Autoprogram check DTV Setup for proper Full Installation option Use Without Program and System Info selection for initial digital station programming Check the SOURCE or ext input control on the remote for the correct operating mode for the DPTV ATSC NTSC Auxiliary Inputs Monitor etc Check the CLOSED CAPTIONS control Some TEXT modes could block the screen Autoprogrammin g Difficulties Check the VOLUME and MUTE buttons on the DPTV and Pronto remote Check the INTERNAL SPEAKERS CENTER C
19. levels coming from either the Antenna Cable input on the rear of the DPTV RF audio or the Auxiliary VCR AUX IN audio inputs 22 PRONTO REMOTE NTSC ANALOG FEATURES PRONTO ANALOG TV MODE ne Pronto remote contains four display screens of analog TV related controls Use the touchscreen controls to access and adjust NTSC features for Input selection Menu feature adjustments and Guide Plus program functions Note For battery installation and other details on the initial use of the Pronto remote control also refer to the 64PP9901 Quick Use guide included with your DPTV BEGIN a Gently tap the Pronto touchscreen with your finger to display its control panel for use Be sure TV is selected for the current device tab item category Press the analog TV button on the Pronto to ensure NTSC mode commands are sent from the remote SMART HELP Due to the amount of 2 optional component and feature uses available with the Pronto s Device Reference and Learn Code lists please also refer to the separate full use Pronto Owner s Manual for complete details on its function and operations OD alternate audio Primarily used for alt audio ATSC mode feature this button can also be used to quickly select the NTSC Second Audio Program SAP feature when available power button Press to turn the DPTV ON and OFF status button Press
20. or fitness for a particular purpose Philips is not liable under any circumstances for any direct indirect special incidental or consequential damages howsoever incurred even if notified of the possibility of such damages IF YOU HAVE QUESTIONS Please contact Philips at 1 800 661 6162 French Speaking 1 800 363 7278 English Speaking REMEMBER Please record the model and serial numbers found on the product below Also please fill out and mail your warranty registration card promptly It will be easier for us to notify you if necessary MODEL SERIAL This warranty gives you specific legal rights You may have other rights which vary from state province to state province Philips Service Company P O Box 2976 Longview Texas 75606 903 242 4800 48 3135 015 12101
21. picture are as bright as you prefer Tint Press M lt or gt to obtain natural skin tones 30 ATSC DIGITAL PICTURE MENU CONTROLS RED BLUE CONVERGENCE lonvergence is the correct lining up of the red and blue light paths on the DPTV screen NOTE If no color fringing see Smart Help shows then no Convergence adjustments are necessary DTV Main Menu BEGIN Picture Sound lt T gt Select the ATSC Convergence eel eatures ae DTV Setup Picture Menu Color Ez With Picture Menu on screen Brightness a Sharpness move the highlight with the p Picture MENU M AF buttons Then Tint j Convergence press the MENU button 2 Exit Back lt 2 Press the MENU AV buttons to select either the Align Red or Align Blue Convergence control press the MENU button to continue Ss Press the MENU buttons to move the selected red or blue Align Red convergence cross directly over the J Align Blue white cross on the DPTV screen Back Convergence The red or blue cross is properly adjusted when it is completely merged with the white cross No color appears around the edge of the white cross S gt Press the exit button to clear dl the screen when convergence adjustments are complete Press 47 to align RED Press MENU to Return SMART HELP Remember Convergence 2 has been set at th
22. red or blue cross is properly adjusted when it is completely merged with the white cross No color appears around the edge of the white cross C Press the exit button to clear the screen when convergence adjustments are complete sy SMART HELP Y Remember Convergence has been set at the factory for best viewing but if one or more of the red or blue colors appear around the edges of objects color fringing follow the steps given in this section pun ool NTSC ANALOG MAIN MENU a ME A MIE K AE a PICTURE SOUND A FEATURES TURE MENU TINT 1ST TIME SETUP PICTURE CLEARVIEW ada lid MORE lt C y 1 oF 2 PICTURE MENU A E 1 p CONVERGENCE DNS PHILIPS PICTURE MENU NAV Vi pad a j y y RED 7 gt CONVERGENCE Oa OEP te Tey EN BLUE CONVERGENCE A EXIT T PRESS O TO ALIGN RED PRESS MENU TO RETURN NTSC ANALOG FEATURE MENU CONTROLS SMART PICTURE J Jith Smart Picture you can set a number of video and audio controls to your own personal preference Once the individual controls have been adjusted to the levels you desire use the list of
23. to see the current channel number on the DPTV screen Also press to clear the DPTV screen after control adjustments mute button Press to turn the sound OFF on the DPTV Press again to return the sound to its previous level channel scan buttons Press to scan up or down through any NTSC programmed channel numbers volume buttons Press to adjust the DPTV sound level up and down ext input button Press to quickly select NTSC auxiliary input modes AUX1 2 3 as well as cycle through the DPTV s other input option modes Monitor VGA EXT HD etc number buttons Press the number buttons to select DPTV channels Press two number buttons to select single digit major channel numbers For example press 0 then 6 for channel 6 sleep button Press to set the DPTV to automatically turn itself OFF 15 minutes to 2 hours ahead TV Guide Plus buttons Press to operate the on screen TV Guide Plus program system Refer to your separate TV Guide Plus Setup and Users manual for operating details on the color coded button functions and system setup options A CH button Press Alternate Channel A CH to select previously viewed channels Enter the desired two channel numbers from the Pronto remote s number buttons and then press A CH to toggle back and forth between the two channel selections 12 37pm wy a menu 4e buttons Press the Menu or M button to show on screen controls Pr
24. A75 MILES 80 KM A 120 KM DU CENTRE DE SERVICE LOCAL COMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVES DE UN CENTRO PHILIPS DE SERVICIO MAS DE 600 SITIOS POR TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO DE UN RADIO DE 80 A 120 KM 50 A75 MILLAS DEL CENTRO DE SERVICIO LOCAL GEORGIA Philips Factory Service of Georgia 200 N Cobb Pkwy Suite 120 Marietta GA 30062 770 795 0085 FLORIDA Philips Factory Service of Florida 1911 US Highway 301 North Tampa FL 33619 813 621 8181 WESTERN U S A Philips Factory Service Western Region 681 East Brokaw Rd San Jose CA 95112 408 436 8566 NORTH CAROLINA Philips Factory Service of N Carolina 520 G Clanton Rd Charlotte NC 28217 704 529 6330 TEXAS Philips Factory Service of Texas 1110 N Post Oak Rd Suite 100 Houston TX 77055 713 682 3990 CENTRAL U S A Philips Factory Service Central US 950 Keynote Circle Brooklyn Heights OH 44131 216 741 3334 MICHIGAN Philips Factory Service of Michigan 25173 Dequindre Madison Heights MI 48071 248 544 2110 DALLAS AREA Philips Factory Service of Dallas 415 N Main Street 107 Euless TX 76040 713 682 3990 47 ILLINOIS Philips Factory Service of Illinois 1279 W Hamilton Pkwy Itasca IL 60143 630 775 0990 TENNESSEE
25. ASE BP WIDTH ALIGN RED ALIGN BLUE Use the Brightness and o ther Monitor picture features such as Picture Sharpness etc to adjust overall DPTV screen intensity for optimum light dark screen areas and shading details Turn the Volume Bar co ON to display the volume settings for external audio ntrol level sourced material on the DPTV screen Select the Bass Treble Balance controls to adjust low high fre quency sound and speaker balance for external input source material played thr audio ough the DPTV s audio system Use the Trim Left Right Center Subwoofer Surround Left Surround Right controls when adjusting sound for a 6 channel audio input received externally for playback through the DPTV s Monitor display operating mode Use the Display Mode F ormat and Input controls to set the DPTV for the type of external monitor input source VGA SVGA EXT HD the DPTV s display screen format used PC Auto 16 9 and RGB typ received Additional Sync Type e signal Horizontal Phase Back Porch Clamp amp Width and Alignment Red amp Blue controls can be used to adjust for color shifts black level and various other display screen imagery M TIPS IF SOMETHING ISN T WORKING lease make these simple checks before calling for service These tips can save you time and money since charges for DPTV installation and adjustment of
26. AUDIO INPUT PHONO INPUT AUDIO SYSTEM or Dolby Pro Logic Receiver SPEAKERS USED FOR PLAYBACK SOUND ATSC DIGITAL ON SCREEN MENU FEATURES 5 DTV SETUP AUTOPROGRAM nce connected to receive digital ATSC broadcast signals available area channels can be added into the DPTV s channel scan memory by the use of the DTV Setup Menu Note Refer to the 64PP9901 Quick Use guide for additional information on digital channel programming and direct ATSC channel selections or access lt D Select DTV Setup control With the DTV Main Menu on screen move the highlight with the MENU M AV buttons Then press the MENU button lt 2 gt Press the MENU AY buttons to select the Full Installation option then press the Menu button Ss Press the MENU AY buttons to select the With or Without Program and System Information option for autoprogramming and then press the Menu button Note See the Program and System Information box to the right for further explanation and details on PSIP and how it is to be used The DPTV shows an Installing indicator bar on screen as the digital channels are added into scan memory DTV Setup Complete shows when the DPTV is through adding digital channels into memory lt 4 gt Press the exit or Menu button to clear the screen SMART HELP Y Note With the full 2 installation Auto Program option the DPTV rewrites its entire digital channel scan
27. AUTO PROGRAM MING CHANNEL MEMORY SZ Press the exit or Menu button to clear the screen ie Channel Numbers ate Saved in Memory Press M to Stop Auto Program lt SMART HELP Try it out Press the 2 CHANNELAY buttons and see which channels you can select Remember an Antenna or Cable signal must first be connected to your DPTV so that channels can be saved If you want to delete any unwanted channels from the DPTV s memory see ADD DELETE CHANNELS on the next page g NTSC ANALOG FEATURE MENU CONTROLS ADD DELETE CHANNELS A uto Programming see previous page adds all the channels it can find on your Antenna or Cable TV system into the DPTV s memory Add Delete Channels makes it easy for you to add other channels or drop NTSC ANALOG MAIN MENU unwanted channels from the list of PICTURE SOUND channels in the DPTV s memory ETA lt I gt Select CHANNEL MEMORY O T ADD DELETE CHANNELS Eune control CHANNEL With the FEATURES MENU on A od screen move the RED highlight MORE with the MENU M to buttons 1 0F2 Then press the MENU button lt 2 gt Press the CHANNEL or number buttons on the Pronto s 2 4 touchscreen display to select the channel you want to add or lc ety A
28. Closed Captioning Setting the DPTV for Cable Antenna Signals 13 Adding Channels in Memory Automatically 14 Adding Channels in Memory Manually Setting the DPTV Clock lt gt Adjusting the Channel Display Control lt gt Using the Channel Label Control SOUND MENU lt gt Adjusting Bass Treble and Balance Sound Controls lt Setting the DPTV for Stereo SAP Programs lt gt Using the Volume Display Control Using the Automatic Volume Limiter Control 22 Pronto Remote NTSC Features lt gt Analog NTSC DPTV Features Audio Video NTSC Connections lt gt Auxiliary 1 2 3 Audio Video Inputs 24 25 lt S Video Input lt gt Audio Video Outputs lt System Audio Output Connections E ATSC Digital On Screen Menu Features DTV SETUP lt gt Automatic Programming of area Digital over the air Broadcast Channels PICTURE MENU lt Adjusting Color Brightness Sharpness Tint and Picture Controls lt Adjusting DTV Convergence SOUND MENU lt gt Surround Sound Speaker Connections lt Selecting the DPTV Surround Mode Control 33 lt gt Dolby Digital Internal and External Speaker System Use and Connections lt Adjusting Bass and Treble Sound Controls Using the Auto Volume Control SPEAKERS MENU lt Adjusting Speaker Menu Controls for Front Center Rear multi speaker arrangements 36 Using the Test Tone Audio Signal Control 3m F
29. D highlight with the MENU M 42 buttons Then press the MENU button lt 2 gt Press the MENU AY and MENU M buttons to highlight and turn ON 4 the STEREO mode S gt Press the exit button to clear the screen SECOND AUDIO PROGRAM Second Audio Program SAP is part of the stereo broadcast system Sent as a additional audio channel SAP can be heard apart from the current TV program sound TV stations are free to use SAP for any number of purposes but many experts believe it will be used for foreign language translations of TV shows or for weather and news bulletins NOTE If a SAP signal is not present with a selected program the SAP option can not be selected This program does not contain SAP information will show on the DPTV screen NTSC ANALOG SOUND MENU CONTROLS NTSC ANALOG MAIN MENU ae a ae ee E PICTURE SOUND N FEATURES ES 1ST TIME SETUP PHILIPS NTSC Y SECOND AUDIO PROGRAM NO lt 7 SPYND MENU 20 SMART HELP Remember 2 If a stereo signal is not available and the DPTV is placed in STEREO the sound coming from the unit will remain monaural mono SOUND MENU BASS TREBLE TENEAN S BALANCE STEREO A rr DISPLAY VOLUME AVL
30. DD DELETE delete d dl eee START AUTO PROGRAM MING CHANNEL MEMORY Raa aba Fe lt 3 gt Press the MENU gt button to ADD the channel into the DPTV s eal memory Press the MENU lt q button to DELETE the channel from memory PHILIPS j Repeat steps 2 and 3 for each UE channel you wish to add or delete ADD Dp ETE CHANNEL a Press the exit or Menu button to clear the screen when SELECT CHANNEL through O to DELETE CHANNEL when FINISHED T o al NTSC ANALOG FEATURE MENU CONTROLS SET CLOCK Vou DPTV comes with an on screen clock During normal operation the clock appears on the screen with every channel change and when the STATUS button is pressed NTSC FEATURE MENU ANALOG MAIN MENU BEGIN SMART CABLE PICTURE Fsouno PICTURE TUNING lt D Select SET CLOCK control pmr FEATURES CLOSED CHANNEL CAPTIONS MEMORY With FEATURES MENU 2 of 2 1ST TIME SETUP y on screen move the RED highlight MOT with the MENU M epbuttons Then press the MENU button Press the remote s number buttons on the Pronto s 2 4 5 FEATURE MENU touchscreen display to set the time oer CHANNEL clock z clock lt LABELS Ge CHANNEL
31. E TURNS MY WORLD AROUND 6 00 WORLD NEWS FOR TODAY 9 00 PLAYHOUSE MOVIE OF THE WEEK FULL SCREEN TEXT will block DPTV screen from viewing NTSC ANALOG FEATURE MENU CONTROLS CABLE TUNING quo aol Ou need to make sure the DPTV is set to pick up either Cable TV or Antenna signals In other words the DPTV needs to know if you connected a Cable TV signal or a normal antenna to its NTSC ANTENNA plug NOTE If you went through First TETT E Time Setup see page 6 this task EEE has already been completed for ALEA ae ee you 1ST TIME SETUP EXIT BEGIN ania lt T gt Select CABLE CHANNEL A PICTURE Bac TUNING control E mm orar CLOSED CHANNEL CAPTIONS MEMORY ANALOG MAIN MENU FEATURE MENU With the FEATURES MENU on screen move the RED highlight with the MENU M2 buttons Then press the MENU button EXIT MORE 10F2 lt 2 gt Press the MENU AY buttons to move the RED highlight Press the MENU button to select 14 the desired mode For Example CABLE CABLE If you DO have Cable TV connected to the DPTV Channels 1 125 available If you have an Antenna connected to the DPTV Channels 2 69 available SZ Press the exit button
32. EATURES MENU lt gt Using the DPTV for ATSC Closed Captioning 38 lt gt Adding Channels in Memory Manually 39 E pronto Remote ATSC Features lt gt Digital ATSC DPTV Features MONITOR On Screen Features lt Connection of VGA SVGA and High Definition HD Component Video auxiliary equipment 41 lt gt Adjusting of DPTV Monitor Display controls for VGA SVGA EXT HD devices A General Information Tips if Something Isn t Working Regulatory Notices Glossary of DPTV Terms Factory Service Locations Warranty Copyright 1998 Philips Consumer Electronics All rights reserved FEATURES ATSC Certified for full compliance with analog NTSC and all 18 digital ATSC formats as specified by the Federal Communications Commission FCC High Definition Digital with full 1920 x 1080 interlaced image resolution capability to achieve superior image performance 64 Widescreen Display with a super large 64 Widescreen 16 9 display format which provides for a true home theater or cinematic experience If a 4 3 aspect ratio picture is the primary source it will be expanded to fill the screen 120 Watt Amplifier to provide up to 20 watts amplification for each of the Left Right front Center Left Right rear Surround and Subwoofer channel speakers First Time Set Up for both NTSC and ATSC channel programming to automatically preset the DPTV for available area stations TV Guide Plus
33. HANNEL INPUT switches on rear of DPTV for proper position Use the NO switch position for internal DPTV cabinet speaker routing and YES position when the DPTV speakers are intended as Center No Sound Channel speakers within an external amplifier supplied Surround Sound system If attempting auxiliary equipment hook ups check audio jack connections and ensure auxiliary equipment is on and in the proper operating modes Check FRONT SPEAKERS switch on rear of DPTV Place in INT ernal position for sound playback through the DPTV s internal speaker system EXT ernal for optional external speaker playback connections using the Front and Surround Speakers Out put terminals on the DPTV e Check for correct battery placement and position in Pronto remote battery compartment Replace with AA Heavy Duty Zinc Chloride or Alkaline batteries if necessary Remote Does Check the Device Tab button on the Pronto remote for correct selected device TV to Not Work operate the DPTV Refer to the separate Pronto Remote Owner s Manual for complete details on its operation and use Press the Pronto s analog TV or DTV touchscreen button to properly select and send remote commands to the desired NTSC or ATSC DPTV mode of operation DPTV Displays e Check and be sure DPTV is in the proper operating mode ATSC NTSC or Monitor Wrong Channel or e Repeat channel selection In ATSC mode allow time for DTV chann
34. IDEO OUT AUDIO lt 2 gt Connect the AUDIO OUT YELLOW OUT jacks R 1ght and L eft from the ae DPTV to the AUDIO IN jacks on the VCR AUDIO VIDEO INPUT JACKS ON VCR SJ Press the ext input button on the Pronto or the Source button d a on the DPTV s local keyboard to 4 place the DPTV in the NTSC oJ mode Select the channel on the DPTV that you want to record Turn the VCR ON Puta cassette tape in the unit and place the VCR in the RECORD mode PHILIPS SMART HELP Y Remember if the VCR Z has an INPUT SELECTOR switch place it in the LINE or CAMERA position Unattended Timer Recordings with a VCR are possible but not recommended with this connection since the DPTV must be left ON for the VCR to record 27 AUDIO VIDEO NTSC ANALOG CONNECTIONS SYSTEM AUDIO OUTPUTS he DPTV s System Audio Output jacks can be used for sound playback through an external audio amplifier or Dolby Pro Logic receiver Connect the R ight and L eft SYSTEM AUDIO OUT jacks on the DPTV to the R and L Audio Input jacks on your amplifier or sound system lt 2 gt Turn DPTV ON and place the external amplifier system to the AUX INPUT mode if applicable Note Dependent upon the audio information received the DPTV outputs a straight two channel Left Right stereo audio signal for output SMART HELP YY Note To eliminate sound playback through the DPTV cabi
35. N Press M to Continue 4 J PLEASE REFER TO YOUR TV GUIDE PLUS USER MANUAL FORDETAILS ON 1st TIME SETUP Note After ALL connections and First Time Setup for TV GUIDE PLUS are completed the TV will have to be turned OFF overnight to receiv program information or Press M to Continue 3 This TV is equipped with the TV Guide Plus feature This feature is designed to operate only on the analog TV antenna Press M to Continue AA 4 Please Wait System is searching for all active channels for the analog TV antenna Testing channel 2 in cable mode PRESS lt TO ALIGN BLUE PRESS MENU TO RETURN This completes the First Time Setup Press M to Exit Setup T nol NTSC ANALOG PICTURE MENU CONTROLS Ez COLOR BRIGHTNESS SHARPNESS TINT PICTURE Ti adjust your DPTV color and picture controls select a TV channel and follow the steps shown below NTSC BEGIN ANALOG MAIN MENU lt I gt Select BRIGHTNESS Tna PICTURE SOUND PICTURE COLOR TINT or SHARPNESS picture control FEATURES PICTURE MENU N 1ST TIME SETUP H COLOR f TINT With the PICTURE MENU on Pee screen move the RED highlight BRIGHT PICTURE with the MENU M 4 buttons T PEEN Then press the MENU button ppm
36. O source equipment through the ET DPTV s Monitor inputs and F gt ab Note The DPTV will display mode Dedicated Audio Mz R A display any Television Input jacks located on the rear of Xx i e the DPTV are also paired to the signal input external source Monitor Video Inputs VGA and HD Component Video In for audio playback connections as well zh 15 PIN VGA For example To connect a Philips Connection Cable DVX8000 Multimedia Home Theater MMHT for monitor Audio IN mode display use on the DPTV Connect a 15 pin VGA signal VOSS cable optional from the VGA Ey alololo ole Qolo or SVGA jack on the select gt auxiliary equipment example DVX8000 MMHT to the VGA Input jack on the DPTV E ero oo Connect the Left Right REAR OF DVX8000 MMHT STEREO IN jacks on the DPTV pes to the L R Audio Output jacks labeled Front on the DVX8000 MMHT lt S gt Press the ext input button 6 CHANNEL AUDIO IN put jacks paired to 66 HD Component Monitor Video Inputs shown on the Pronto remote or the below For use with external accessory OO Source button on the DPTV s local equipment capable of Dolby Dig
37. O cable has been connected to the DPTV gt Turn the VCR ON and place it in the S VIDEO or S VHS playback mode Insert S VHS cassette tape and playback in a normal manner SMART HELP Y Remember connections 2 and use of the DPTV s S VIDEO AUX2 Input plug is the same as for the S VIDEO AUX1 input except S VIDEO 2 is selected as the Picture Source in step 3 PICTURE AND SOUND FROM PLAYBACK OF S VHS VCR TAPE PLAYBACK S VIDEO PHILIPS 26 REAR OF DPTV S VIDEO CABLE AUDIO OUT RED WHITE S VIDEO OUT O ea S VHS VCR NOTE A CD i Compact Disc Interactive player Video Game or other S VIDEO accessory can be hooked up to the DPTV using this type of connection Please be aware that such video sources which show a constant non moving pattern on the DPTV screen can cause picture tube damage When not in use turn your video accessories OFF Also regularly alternate the use of video sources with normal TV program viewing AUDIO VIDEO NTSC ANALOG CONNECTIONS AUDIO VIDEO OUTPUTS he Audio Video Output jacks on the DPTV can be used to PICTURE AND SOUND BEING RECORDED ON record TV programs on VCRs which have Audio Video Input REAR OF DPTV jacks To record TV programs by using the Audio Video Output jacks on the DPTV lt I gt Connect the VIDEO OUT jack from the DPTV to the VIDEO IN jack on the VCR V
38. Smart Picture feature category titles to quickly reselect these personalized settings contained within the memory of the DPTV See the next page for more details on the labeling options and use of Smart Picture BEGIN Select the SMART PICTURE control With the FEATURES MENU on screen move the RED highlight with the MENU M buttons Then press the MENU button highlight the category list for Smart Picture Press the MENU button to select 14 the desired title Ss Press the MENU M 42 buttons to choose any of the individual controls you wish to adjust for the Smart Picture selected title Then press the Menu M button to select Z gt Press the MENU AV buttons to the highlighted control lt 4 Press the Menu lt or gt arrow or Menu M 412 buttons to adjust the selected control lt B gt Press the exit button on the remote to clear the screen after you have finished with all of your Smart Picture feature control adjustments SMART HELP Note Select the 2 FACTORY SETTINGS category to automatically return the DPTV to the video and audio control levels preset at the factory prior to product shipment NTSC ANALOG MAIN MENU PICTURE SOUND vl dade ET y FEATURES TENE 1ST TIME SETUP 10 FEATURE MENU S SMART CABLE PICT
39. URE 3 TUNING CETA CLOSED CHANNEL CAPTION MEMORY EXIT MORE 1 OF 2 SMART PICTURE Ss in LABEL 1 LABEL 2 LABEL 3 LABEL 4 LABEL 5 FACTORY SETTINGS M to SELECT SMABT PICTURE MENU CHANGE LABEL COLOR SHARP TINT BRIGHT PICTURE EF y EXIT MORE pr SMART PICTURE MENU CLEARVIEW SAP BASS TREBLE BALANCE STEREO bs EXIT MORE im aol NTSC ANALOG FEATURE MENU CONTROLS SMART PICTURE i ollowing your initial setup adjustments see previous page just select the desired Smart Picture category in order to place the DPTV to the personalized set of audio and T FEATURE MENU N 4 S 1 c video control settings for that title 5 PICTURE E TUNING DA BEGIN CLOSED CHANNEL CAPTION MEMORY lt T gt Select the SMART PICTURE smart recite SS control EXIT MORE LABEL 1 1 OF 2 With the FEATURES MENU on LABEL 3 screen move the RED highlight with LABELS A CTORY S GS the MENU M 4e buttons Then a scr aes press the MENU button lt 2
40. al audio playback source Note The rear Surround Sound speakers will not be heard at the same volume level as the front DPTV speakers It is DPTV intended for the rear speakers to give a background noise effect la al which requires a lower volume level than the DPTV s front speakers EMA gt REAR SPEAKER REAR SPEAKER PRIMARY VIEWING AREA ATSC DIGITAL SOUND MENU CONTROLS SURROUND SOUND T Surround Sound control option allows you to select the type of sound mode sent to the DPTV s speaker system lt 1 Select the ATSC Sound Menu With DTV Main Menu on screen move the highlight with the MENU M AY buttons Then press the MENU button lt 2 gt Press the MENU AV buttons to select the Surround Mode control lt 3 gt Press the Menu lt or gt buttons to select the Surround or Stereo mode for DPTV sound playback See the Surround Sound information box to the right for further details on the feature and its use S Press the exit button to clear the screen DOLBY DIGITAL SURROUND Je order to receive the full reproduction capability of true Dolby Digital Surround Sound you require the proper use and arrangement of a Subwoofer and surround speakers The DPTV s extra speaker connections make it possible to create a multichannel soundfield effect previously available only within a movie theater or concert hall With the new 5 1 discrete digital channel surround sound s
41. ale Monitor 2 Feature Menu adjustments such as Brightness Picture etc will display separate control panel screens for individual settings Repress the Menu button on the Pronto remote or local keyboard to return the DPTV to the Monitor Menu when control adjustments are complete BRIGHTNESS PICTURE SHARPNESS COLOR TINT VOLUME BAR ON OR OFF AUDIO INPUT 6 CHANNEL OR STEREO BACK es IE e Note The list of Monitor Menu features and their individual control settings will change or readjust according to the capabilities of the selected Display Mode VGA SVGA etc Also due to on going DPTV product design improvements such Monitor feature controls as BP Back Porch Clamp are soon to be automated for the sake of customer ease of use and operation These features will operationally still be in place but their functioning will be transparent to the end user and will no longer require any manual adjustments 42 BASS TREBLE BALANCE TRIM LEFT TRIM RIGHT TRIM CENTER TRIM SUBWFR TRIM SURR L TRIM SURR R INTERNAL AMP OR OFF DISPLAY MODE OR SVGA AUTO HD DISPLAY FORMAT OR 16 9 FILL NORMA INPUT TYPE OR YUV RGB DIRECT SYNC TYPE OR MODE 1 8 HOR PH
42. applying exces sive pull force to the front or top of the cabinet which could ultimately overturn the product Also do not endanger yourself or children by placing elec tronic equipment toys on the top of the cabinet Such items could unsuspectingly fall from the top of the set and cause product damage and or personal injury Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer Ventilation The appliance should be situated so that its location or position does not interfere with its proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation openings or placed in a built in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat Power Sources The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance Example of Antenna Grounding as per NEC National Electric Code GROUND CLAMP ELECTRIC SERVICE EQUIPMENT 11 12 13 14 15 16 17 18 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinc
43. button to clear NEVER the screen a A DURING AD USTMENT i ARS 21 NTSC ANALOG SOUND MENU CONTROLS AUTOMATIC VOLUME LIMITER A you tired of the sound of commercials following you f into the next room or all through the house The Automatic Volume Limiter AVL control allows you NTSC to preset a desired volume level that the DPTV sound will not go above This makes for an even PICTURE z Emm SOUND MENU BASS TREBLE ANALOG MAIN MENU vial more consistent sound by reducing FEATURES the peaks and valleys that can BALANCE STEREO 1ST TIME SETUP ENE occur during program changes or DISPLAY VOLUME avi commercial breaks Ss BEGIN EXIT MORE OF 2 d Select AVL Automatic Volume A Limiter control With SOUND MENU on screen move the RED highlight with the MENU M 42 buttons Then press the MENU button lt 2 gt Press the MENU A or Y and then the MENU M button to turn the AVL control ON or OFF L Press the exit button to clear the screen when completed SMART HELP Remember AVL works 2 for sound
44. channels full installation Full Installation Install with Program and System Info Install without Program and System Info Cancel Auto Program Autoprogramming in progress This may take several minutes Cancel Installing E E ATSC DIGITAL PICTURE MENU CONTROLS COLOR BRIGHTNESS SHARPNESS TINT PICTURE q Ba adjust your ATSC color and picture controls select a digital channel and follow the steps shown below BEGIN lt T gt Select the ATSC Picture EPT Menu Picture Sound Speakers With the DTV Main Menu on Features DTV Setup s screen move the highlight with Picture Menu the MENU M AY buttons Then Color Brightness press the MENU button Sharpness Picture Tint Convergence Press the Menu or gt arrow buttons to adjust the selected Back picture or color control Control settings are at normal mid range levels when Press the Menu M AV buttons the bar scale is centered to move up and down the list of on screen Picture controls SS Press the exit button to clear the screen SMART HELP Color Press M lt or PHILIPS gt to add or eliminate A color Brightness Press M lt or gt until dark parts of the picture show good detail Sharpness Press M lt or to improve detail in the picture Picture Press M lt or until whitest parts of the
45. closed caption program Usually CAPTION 1 is the most used mode to view captioned material Refer to your area s TV program listings for the stations and times of Closed Caption shows NTSC ANALOG MAIN MENU PICTURE S FEATURES ay ee SOUND 1ST TIME SETUP PHILIPS NOTE The ON DURING MUTE ONLY control can be used to set the DPTV to turn the Closed Caption mode ON whenever the MUTE button on the remote is pressed Closed Caption information will usually appear in black and white although some broadcasters or networks may occasionally use color to highlight or draw attention to certain areas FEATURE MENU SMART CABLE PICTURE TUNING ae a CLOSED CHANNEL CAPTION g MEMORY tT gt t yt EXIT MORE 1 OF 2 Y ALWAYS ON ALWAYS OFF ON DURING MUTE ONLY CAPTION 1 TEXT 1 CAPTION 2 TEXT 2 CAPTION 3 TEXT 3 CAPTION 4 TEXT 4 JOHN Why did they move the f meeting up to this week MARSHA I don t know but they are pushing to close the deal CAPTION 1 mode Example Screen Display CLOSE CAPTION PROGRAMS ON WXYZ ALL ITEMS ARE EASTERN STANDARD TIME EST CHECK LOCAL LISTINGS FOR TIMES IN YOUR AREA 6 00 TOP OF THE MORNING 10 00 THE BEST LITTLE CALL IN SHOW EVER 12 00 NOONDAY NEWS 1 30 AS YOUR LIF
46. ctions Check your local listings for CC program details Back Note The On during Mute setting under the Captions On Off control can be used to set the DPTV lt 4 gt Press the exit button to clear to turn the current selected Closed Caption mode example Caption 1 ON whenever the MUTE the o The selected Closed button on the remote is pressed Caption mode will be active with the Captions On Off control also set to the Always On position To cancel set the Captions On Off control to Always Off SMART HELP Due to the increased data capacity within the DTV broadcast system 10 times the capacity of the analog NTSC system the ATSC version of Closed Caption will allow for simultaneous transmission of multiple languages and offer various reading level options for the captioned material if available 38 ATSC DIGITAL FEATURES MENU CONTROLS ADD DELETE CHANNEL ne DTV Setup Menu control see page 30 autoprograms all available signal ATSC digital channels into the DPTV s scan memory Use the Add Delete Channel control to eliminate or add to the specific list of major channels contained within the DTV Main Menu Picture Sound Note Refer to page 5 in the roses 64PP9901 Quick Use guide for DIN Setup additional information on major Exit DPTV s scan memory and sub channel digital channel s
47. e FEATURE MENU 2 of 2 on screen move the RED highlight using the MENU M 4 buttons Then press the MENU y M button lt 2 gt Press the MENU AV and MENU M buttons to highlight and select either MANUAL to create your own label for a channel PRESETS to choose from a list of prewritten channel labels See instruction details on this page lt 3 gt Press the exit button to clear the screen EA AS PHILIPS O or D to seLecrT A or Y to CHANGE CD when FINISHED A re CHOOSE CHANNEL A Y to SELECT LABEL QD to exit MANUAL To create your own Channel Label Press the Channel AV or Number buttons to select desired station A red highlight shows the active letter space for the channel label Press the MENU A V buttons to pick any of the letters or symbols that are given for your use Press the MENU lt q gt buttons to move the red highlight to the other letter spaces and repeat Press the STATUS button to clear the screen when finished PRESETS To pick a Label from the LABEL list Press the Channel AV or Number buttons to select desired station Press the MENU AV buttons to move up and down the Channel Label list Just stop on any label you might want to use The selected label automatically appears with channel changes and when the STATUS button is pressed Press the STATUS button to clear the screen whe
48. e factory for best viewing but if one or more of the red or blue colors appear around the edges of objects color fringing follow the steps given in this section 31 Va ATSC DIGITAL SOUND MENU CONTROLS SURROUND SOUND B adding optional external REAR OF DPTV speakers to the DPTV s sound REAR SURROUND SOUND system you can create the feeling SPEAKER TERMINALS ss Operational only in ATSC or of reflected sound that surrounds Monitor Diplay modes you at a movie theater or concert hall BEGIN SURROUND EXTERNAL SPEAKERS OUT Sec Dec 587 lt 1 gt Connect both external speakers to the speaker wire terminals on the DPTV 00900600000000000 Recommended speakers 25W 8 ohm minimum Be sure the and speaker wires are connected to the correct R ight and L eft speaker terminals on the DPTV lt 2 gt Place the speakers so the viewing area is between the DPTV All External Speakers 25W 8 ohms Min and the rear surround speakers AT Sooo O OON See overhead view drawing on this page lt 3 gt Turn DPTV ON After setup p o S whenever a stereo signal is received the audio will be heard in Surround Sound UN SMART HELP REAR SURROUND SOUND SPEAKERS ae Note Surround Sound will not work with only one speaker connected or with monaur
49. e level of the DPTV s right rear surround sound speaker as connected through the Right Surround External Speaker Output terminal on the rear of the DPTV Delay control adjusts rear surround sound to compensate for room size and how far the rear surround speakers are located behind the system user 3feet 1 meter 6 feet 2 meters etc Test Tone e On Off allows the use of a test tone signal in order to help set the volume levels for the individual channel DPTV audio system speakers See the following page for details on the use of the test tone speaker adjustment process Subwoofer Level e Adjusts the volume level of a subwoofer speaker as connected through the Subwoofer Speaker Output terminal on the rear of the DPTV Note The DPTV s additional Subwoofer Preamp Output plug provides a variable line level signal intended for an external powered subwoofer capable of its own volume level adjustments ATSC DIGITAL SPEAKERS MENU CONTROLS TEST TONE L Test Tone Speaker Menu control generates a sound test signal that can be used to adjust individual DPTV speakers to desired volume levels The Test Tone signal will be directed to each audio speaker channel separately Speaker Menu A a Delay Normal Front in Line both internal DPTV cabinet Left speakers and external Speaker A o J Delay Normal Front in Line Output terminal connections when i Let Right the control is turned On Ory Of
50. eaumont Austin k hig Myers SW Florida 1 800 242 9225 San Antonio Miami SE Florida e Indicates In Home Carry In Service NOTE If you reside in one of our Philips Factory Service Branch areas see directory on back you can contact the nearest Service Branch to obtain efficient and expedient repair for your product If your product is In Warranty you should have proof of purchase to ensure No Charge Service For Out of Warranty service call the location nearest you NOTA Si vous r sidez dans une des r gions desservies par une succursale de service apr s vente du fabricant Philips voir liste ci dessous vous pourrez contacter la branche de service apr s vente la plus pres de chez vous pour obtenir un service apr s vente rapide et efficace Si le produit est sous garantie il suffira de pr senter une preuve d achat pour b n ficier d un service sans frais Pour les produits non couverts par la garantie contactez le centre le plus pr s de chez vous NOTA Si Ud reside en una de nuestras zonas para sucursales Philips de servicio al de f brica ver directorio m s abajo Ud puede comunicarse con la sucursal de servicio m s cercana para obtener una reparaci n oportuna y eficaz de su producto Si su producto est todav a bajo garant a Ud debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio Para servicio despu s del vencimiento de la garant a llame al lugar m s cercano de los abajo indicados In Ca
51. el acquistion and incorrect program display process to take place For ATSC sub channel selections be sure to enter the desired four digit channel number using the Pronto remote Note The DPTV is equipped with protective circuitry that shuts the unit off in case of moderate power surges Should this occur turn the DPTV back on by pressing the POWER button once or twice or unplug and then replug the power cord at the AC outlet This feature is NOT designed to prevent damage due to high power surges such as those caused by lightning which is not covered by your warranty Cleaning and Care e To avoid possible shock hazard be sure the DPTV is unplugged e Gently wipe the cabinet surfaces with a clean cloth or sponge from the electrical outlet before cleaning dampened in a solution of cool clear water and a mild soap or e When cleaning the DPTV screen take care not to scratch or detergent Use a clean dry cloth to dry the wiped surfaces damage the screen surface avoid wearing jewelry or using e Occasionally vacuum the ventilation holes or slots in the cabinet anything abrasive do not use household cleaners Wipe the front back screen with a clean cloth dampened with water Use even easy e Never use thinners insecticide sprays or other chemicals on or near vertical strokes when cleaning the cabinet as they might cause permanent marring of the cabinet e Specially designed screen cleaning kits are also available which finish
52. elections and how they are used within the ATSC broadcast system lt D Select the ATSC Features Menu With the DTV Main Menu on screen move the highlight with the MENU M AV buttons Then press the MENU button lt 2 gt Press the Menu M AV buttons to select the Add Delete Channel control Then press the MENU button lt 3 gt Press the CHANNEL or number buttons on the Pronto s 2 4 touchscreen display to select the channel you want to add or delete lt Press the MENU M AY buttons to select Add this Major Channel control option and then press the Menu button to add the specific digital channel into the DPTV s scan memory OR Press the MENU M AV buttons to select Delete this Major Channel and press the Menu button to drop the digital channel from the DPTV s scan memory Repeat steps 2 3 and 4 for each channel you wish to add or delete lt B gt Press the exit button to clear the screen when complete 39 Features M enu Captions Format Caption 1 Captions QV Of Always On Add Delete Channel Back Add Delete Channel Add This Major Channel Delete This Major Channel Back Vat PRONTO REMOTE ATSC DIGITAL FEATURES o PRONTO DIGITAL TV MODE le Pronto remote contains touchscreen displays for DTV related controls Use the Pronto s touchscreen buttons to access and adjust the
53. er 1996 HDTV High Definition Television which offers approximately twice the vertical horizontal resolution of NTSC video and sound quality approaching that of compact disc Usually taken to mean a picture of 1920 x 1080 pixels in a 16 9 aspect ratio LED Light Emitting Diode or indicator Major Channel The RF transmitted channel on which an ATSC digital station is broadcast Also referred to as virtual channel Menu An on screen listing of feature controls shown on the DPTV screen that are made available for user adjustments MPEG Motion Picture Experts Group and the video compression formats devised for transmission of digital broadcasts Multichannel Television Sound MTS The broadcast standard that allows for stereo sound to be transmitted with the TV picture NTSC National Television Standards Committee format devised for TV broadcasting signals in the 1940s 525 lines 30Hz On Screen Displays OSD Refers to the wording or messages generated by the DPTV to help the user with specific feature controls color adjustment programming etc Pre Amplifier The control center of a hi fi system Not only amplifies source inputs but also allows for source selection volume tone balance and all other controls that affect the sound Programming The procedure of adding or deleting channel numbers into the DPTV s memory circuits In this way the DPTV remembers only the locally available or de
54. ess M A or Y buttons to move up or down the M lt q or P gt to move left or right through the list of controls exit button Press to clear the DPTV screen after control adjustments Also press to see the current channel number on the DPTV screen aa Analog MD orv gam scroll arrows Press to move to the next or previous page of Pronto controls The touchscreen will display the current control screen s page number and the total number of pages available for the selected device 1 4 2 4 etc 23 AUDIO VIDEO NTSC ANALOG CONNECTIONS AUX1 2 INPUTS he Analog Audio Video Input jacks are for direct NTSC PICTURE AND SOUND FROM picture and sound connections PLAYBACK OF VCR TAPE between the DPTV and auxiliary equipment VCR DVD Player etc that has Audio Video Output jacks To view the playback of a VCR tape by using the Analog AUXI i AA REAR OF DPTV AUDIO Audio Video Input jacks ma LT a as lt I gt Connect the VIDEO OUT jack a WS from the VCR to the AUX 1 VIDEO IN AUDIO IN VIDEO IN jack on the DPTV YELLOW e x z RED WHITE lt 2 gt Connect the AUDIO OUT jacks RGght and L eft from the VCR to the AUX 1 AUDIO IN Peete bgt jacks on the DPTY UTPUT JACKS wise wn E o Se IN lt 3 gt Press the ext input button on the Pronto or the Source button on the DPTV s local keyboard to select the AUX 1 Audio Video Inputs on the rear of the DPTV
55. f Left BEGIN cal lt D Select Test Tone sound control Test Tone Subwoofer Level With the Speakers Menu on screen move the highlight with the MENU M AV buttons Back lt 2 gt Press the MENU lt gt arrow buttons to turn the Test Tone control ON lt 3 gt With the Test Tone speaker signal active press the MENUAY arrow buttons to select the desired DPTV system speaker for individual volume level adjustment for example Front Left Rear Right etc Test Tone signal circulates through the speaker system s e y in a clockwise direction and is meant to be used with the lt G Press the MENU Ad gt arrow Sa adjustable Speaker Menu barscale controls such as Front Speaker Left Right and Rear Speaker Left Right lt gt on the Pronto remote or Once turned On the Test Tone will continue to circulate the Volume buttons on the through the Front and Rear speakers even when other sound controls are selected such as Subwoofer which DPTV s local keyboard to adjust are not adjustable within the Test Tone mode the selected speaker volume levels Continue and select the other DPTV system speakers for adjustment as desired lt B gt Press the MENUAY arrow gt to return to the Test Tone Menu control when speaker adjustments are complete and turn the control Off 37 r
56. gt Press the MENU M AV buttons with the list of SMART PICTURE categories on the DPTV screen to highlight the desired category Then press the Menu M button to select the audio and video control settings for that particular title Cr Press the exit button on the remote to clear the screen pa IY m Da 4 fmo T PHILIPS S CHANGE LABEL he CHANGE LABEL control can be used to update the title of a SMART PICTURE setting into a name or label that may be easier for you to remember lt I gt With the SMART PICTURE LABEL control on screen press the MENU AY buttons to spell out a new label or title for the selected SMART PICTURE category title A SMART PICTURE MENU 7 CHANGE LABEL COLOR SHARP TINT BRIGHT PICTURE EXIT MORE SMART PICTURE LABEL A or W to CHANGE QD when FINISHED Press the MENU lt q gt buttons to move the red highlight to each letter space lt 3 gt Press the exit button to clear the screen when the new label is finished m CLOSED CAPTION losed Captioning CC allows you to read the voice content of NTSC television programs on the DPTV screen Designed to help the hearing impaired this feature uses on screen text boxes to show dialogue and conversations while the TV program is in pr
57. hed by items placed upon or against them paying particular attention to cords and plugs convenience receptacles and the point where they exit from the appliance Cleaning The appliance should be cleaned only as recommended by the manufacturer Power Lines An outdoor antenna should be located away from power lines Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electric Code ANSI NFPA No 70 1984 provides information with respect to proper grounding of the mats and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Fig below Non use Periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings Damage Requiring Service The appliance should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged or B Objects have fallen or liquid has been spilled into the appliance or C The appliance has been exposed to rain or D
58. imits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation this equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for help Modifications The FCC requires the user to be notified that nay changes or modifications made to this device that are not expressly approved by Philips Consumer Electronics may void the user s authority to operate the equipment Cables Connections to this device must be made with shielded cables with metallic RFI EMI connector hoods to maintain compliance with FCC Rules and Regulations Canadian Notice This Class B digital apparatus
59. in order to achieve dynamic audio range compression This single value setting by the Auto Volume control allows for a more consistent even sound reproduction in the playback of ATSC audio lt D Select Auto Volume sound control With the Sound Menu on screen move the highlight with the MENU M AY buttons Then press the MENU button lt 2 gt Press the MENU lt gt arrow buttons to turn the Auto Volume control to ON compressed or select Full Range to receive a non compressed ATSC audio signal Ss Press the exit button to clear the screen Cro DTV Main Menu Picture Sound Speakers Features DTV Setup Exit o S PHILIPS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit 35 Sound Menu Surround Mode Surround Treble Bass Il Auto Volume ON compressed Back Treble and Bass are set to factory midpoint or default levels when the barscale adjustments are placed to the center detent position Sound Menu Surround Mode Surround Treble Bass Auto Volume ON compressed Back SPEAKERS L Speakers Menu involves various setup and function aspects of multichannel speaker configurations possible within Dolby Digital Surround Sound system playback Basically the Speakers Menu controls deal with distinct one time settings f
60. information and special offers for which you qualify plus easy access to accessories from our convenient home shopping network And most importantly you can count on our uncompromising commitment to your total satisfaction All of this is our way of saying welcome and thanks for investing in a PHILIPS product Sincerely P S Remember to get the most from your PHILIPS Robert Minkhorst product you must return your Warranty President and Chief Executive Officer Registration Card within 10 days So please mail it to us right now Know these A This bolt of lightning indicates uninsulated material within your unit which may cause an electrical shock For the safety of everyone in your household please do not remove product bane covering Ysy 100 S A The exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems CAUTION AUTION WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS EQUIPMENT Cuca OF ELECTRIC SHOCK TO RAIN OR MOISTURE DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT CAUTION To prevent electric shock match wide blade of plug to wide slot and fully insert REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ATTENTION Pour viter les chocs lectriques introduire la lame la plus large de la fiche dans la borne correspondan
61. ital 5 1 level OOO oun o keyboard to select the required audio output playback connections 9900 anon Monitor mode VGA SVGA and SYNC hronization slide switch used to set EXT HD Monitor modes are the DPTV for digital HD Component signal available for selection with the input source impedance low 75 ohm or High ext input or Source buttons H H V for combined Horizontal Vertical sync signals or V ertical sync inputs control Use the DVX8000 MMHT as the display of a RBG sourced picture in the left e to right dimension and from top to bottom the video and or audio playback source for material to be displayed e Separate Red Green Blue Luminance Y and on the DPTV Color Difference Pr Pb Component Video Inputs provided for improved color bandwidth D information and highest possible picture resolution for digital source connections See BNC Connector information below ES SMART HELP e BNC Bayonet Connectors are available to a attach a computer to the DPTV for use as a Note The DPTV s video monitor display The optional BNC cables display may temporarily appear twist and secure to the individual Ks Oo Red Green Blue and Horizontal Vertical misconverged during the initialization 5 A a ync hronization component Video Inputs of certain VGA input connected PC on the rear
62. meets all requirements of the Canadian Interference Causing Equipment Regulations Avis Canadien Cet appareil num rique de la classe B respecte toutes les exigences du R glement sur le mat riel brouilleur du Canada 44 IN SEIS Mi Audio Video Inputs Located on the rear of the DPTV these connectors RCA phono type plug are used for the input of audio and video signals Designed for use with VCRs or other accessories in order to receive higher picture resolution and offer sound connection options Aspect Ratio The proportions of a rectangular display screen NTSC television has a 4 3 ratio HDTV is 16 9 ATSC Advanced Television Systems Committee established by the Federal Communications Commission to set standards for digital television Coaxial Cable A single solid antenna wire normally matched with a metal plug F type end connector that screws or pushes directly onto a 75 Ohm input found on the Television or VCR Display An on screen message or graphics that help the user operate and adjust DPTV feature controls See On Screen Displays OSD Dolby Digital A digital 6 channel compression and surround sound audio standard developed by Dolby Labs Inc also known as 5 1 DPTV Digital Projection Television comprised of ATSC NTSC and Monitor modules DTV The broadly defined term used to describe the new digital television system adopted by the Federal Communications Commission FCC in Decemb
63. n finished NTSC ANALOG SOUND MENU CONTROLS BASS TREBLE BALANCE Ko DPTV also has individual sound adjustment controls The BASS low frequency TREBLE high frequency and Speaker BALANCE may all be used to adjust the sound playback of NTSC TV programs BEGIN lt T gt select BASS or TREBLE or BALANCE sound control With the SOUND MENU on screen move the RED highlight with the MENU M 2 buttons Then press the MENU button lt 2 gt Press the MENU gt arrow buttons to adjust the sound control to levels you prefer SS Press the exit button to clear the screen NTSC ANALOG MAIN MENU tela ds PICTURE sounn lt Badia ERA Ig FEATURES 1ST TIME SETUP A oi TE SOUND MENU gt Bass EL ON BALANCE DISPLAY VOLUME EXIT Select and then press MENU M button to view additional controls grouped under same feature heading For Example Treble Balance Stereo etc f STEREO our DPTV is able to receive broadcast stereo TV programs The DPTV is equipped with an internal amplifier and speaker system through which the stereo sound can be heard L Select STEREO sound control With the SOUND MENU on screen move the RE
64. nada How you can obtain efficient and expedient carry in mail in or in home service for your product Please contact Philips at 1 800 661 6162 French speaking 1 800 363 7278 English speaking Au Canada Comment obtenir le service apres vente pour les produits apport s ou envoy s par la poste notre centre de service ou le service a domicile Veuillez contacter philips 1 800 661 6162 Francophone 1 800 363 7278 En el Canad C mo recibir servicio efficiente para su producto en persona por correo o a domicillo Favor de comunicarse con Philips al 1 800 661 6162 franc fono 1 800 363 7278 angl fono EL4482 3 Rev Z MAC2929 12 98 46 3135 015 07541 QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER NEAR YOU YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY IN MAIL IN OR IN HOME SERVICE AND YOU WILL RECEIVE PEACE OF MIND KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS FACTORY SERVICE AND IF THE PHONE NUMBER LISTED FOR YOUR AREA IS LONG DISTANCE CALL 1 800 242 9225 For Factory SERVICE COMMENT OBTENIR NOTRE SERVICE APRES VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER A DOMICILE OU EN SE PRESENTANT A UN CENTRE DE SERVICE PHILIPS PLUS DE 600 CENTRES DE RECEPTION DE PRODUITS A REPARER A TRAVERS LE PAYS CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L EMPLACEMENT DE CES DEPOTS DANS UN RAYON DE 50
65. nel s transmitted signal the minor channel can be used and selected for additional programming Subwoofer A speaker designed for audio playback of only the lowest frequency notes under 100 Hz SVGA Super Video Graphics Array S Video Input Allows direct connection of high resolution video sources such as a Super VHS videocassette recorder Laser Disc player etc Provides improved picture resolution sharpness and clarity Twin Lead Wire The more commonly used name for the two strand 300 Ohm antenna wire used with many indoor and outdoor antenna systems In many cases this type of antenna wire requires an additional adapter or balun in order to connect to the 75 Ohm Input terminals designed into the more recent Televisions and VCRs Variable Audio Output An adjustable audio output which allows for volume variations at the source VGA Video Graphics Array YUV Component video signals consisting of Y luminance and normalized color differences U and V 45 Philips Consumer Electronics Company Factory Service Center Locations See Reverse Side for More Details TY eh Za Cleveland NOhio San Krancisco Metro Are Chicago x Cojumb X N Ss N Los Angeles e e Charlotte Pittsburgh WV Are Knoxville E Tennessee Philadelphia S New Jersey Atlanta N Georgia SY e Dallas TS ash Balt Orlando Houston Galveston r e Tampa W Florida Indicates In Home Service Only B
66. net speakers when using an external amplifier audio connection you can either Press the MUTE button on the Pronto remote to eliminate sound through the DPTV speakers OR Place the FRONT SPEAKERS switch on the rear of the DPTV to the EXT ernal position which will also eliminate the use of the Front External Speaker Out connection terminals on the DPTV REAR OF DPTV The System Audio Out put jacks send the DPTV s current audio ATSC NTSC or Monitor to an external amplifier for output The advantage of such an additional System Audio Out connection as shown in this diagram is that it could continue to route the supplied audio signals from the DPTV to an external amplifier or Pro Logic Receiver even when the selected program source switches between a digital ATSC program NTSC or Monitor supplied source In the case of digital multichannel audio the DPTV downmixes the audio output to a straight 2 channel stereo signal Note For best audio reproduction and playback of Dolby Digital surround sound through a Pro Logic Receiver when using the System Audio Out jacks e place the REAR SPEAKER DELAY control located in the DPTV s ATSC Speakers Menu to the maximum 13 feet 4 meters setting e place the Center Channel Delay control located in the DPTV s ATSC Speakers Menu to the Center Back position 28 6 CHANNEL AUDIO IN AUDIO INPUT JACKS
67. new DPTV 7 SMART HELP Remember SETUP is a 2 first use one time operation and will not have to be repeated Press the exit button on the remote or DPTV to stop the SETUP at any time Note Because of the variety of connections possible with the Guide Plus feature refer to the separate Guide Plus manual for complete details on its setup and use Press the Pronto remote s analog TV or the Source button on the DPTV s local keyboard to select the NTSC operating mode NTSC ANALOG MAIN MENU PICTURE FEATURES EE ast time setup NTSC ANALOG ON SCREEN MENU FEATURES 12 37pm EW 3 4 4 Analog ED tv provides a simple method of adjusting the most important controls for this television receiver Many of the current TV control settings will be modified by continuing with First Time Setup Press M To Continue Press STATUS to Quit NY Please Ta that your analog TV antenna or cable is connected to the plug marked ANT on the TV rear input panel Please Wait System is testing for correct tuning mode Press STATUS to Quit for the analog TV antenna or Press M to Continue 4 The search for active channels is complete for the analog TV antenna 17 channels were found and saved in memory PRESS tTO ALIGN RED PRESS MENU TO RETUR
68. oduct expires the warranty on all replaced and repaired parts also expires WHAT IS EXCLUDED Your warranty does not cover e labor charges for installation or setup of the product adjustment of customer controls on the product and installation or repair of antenna systems outside of the product product repair and or part replacement because of misuse accident unauthorized repair or other cause not within the control of Philips Consumer Electronics Company reception problems caused by signal conditions or cable or antenna systems outside the unit aproduct that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications e incidental or consequential damages resulting from the product Some states do not allow the exclusion of incidental or consequential damages so the above exclusion may not apply to you This includes but is not limited to prerecorded material whether copyrighted or not copyrighted e a product used for commercial or institutional purposes WHERE IS SERVICE AVAILABLE W arranty service is available in all countries where the product is Officially distributed by Philips Consumer Electronics Company In countries where Philips Consumer Electronics Company does not distribute the product the local Philips service organization will attempt to pro
69. of the DPTV This type programs i e DOS Once the PC connection ensures optimum video and color program has completed its bootup reproduction performance from a computer z 0 or other external High Definition playback phase normal signal level processing os will reoccur and the DPTV display will return to normal 41 MONITOR MENU CONTROLS q ES Monitor Menu feature controls are to aid you in setting up the DPTV for the best in display image quality Generally the Monitor feature controls cover the basics in color and video image screen adjustments A variety of Monitor Audio Input controls are also available for various speaker trim adjustments dependent upon whether the externally supplied Monitor input source is capable of 2 channel stereo or 6 channel digital sound replay Press the ext input button on the Pronto s TV touchscreen or SOURCE on the local keyboard to place the DPTV in the desired monitor display mode VGA SVGA EXTHD lt gt Press the MENU button to display the Monitor Feature Control Menu lt 3 gt Press the M Up Down AV Arrows on the Pronto s touchscreen display to highlight items within the Monitor control screen list lt 4 gt Press the Left Right lt q gt Arrows on the Pronto to adjust the selected on screen feature control SS Press the exit button to clear the screen when complete SMART HELP Certain barsc
70. ogress BEGIN lt T gt Select CLOSED CAPTIONING control With the FEATURES MENU on screen move the RED highlight with the MENU M 42 buttons Then press the MENU button Press the MENU AY buttons to move the RED highlight Press the MENU button to select 14 the desired Closed Caption mode For Example ALWAYS ON and CAPTION 1 CAPTION 1 2 3 4 dialogue and descriptions for the action on the captioned TV program shows on screen See Important Note on this page TEXT 1 2 3 4 often used for channel guide schedules or bulletin board information for CC programs After making your Caption mode selection press the exit button to clear the screen The selected Closed Caption mode will be active To cancel set the Closed Captioned feature to OFF when finished SMART HELP Remember broadcast stations will often use spelling abbreviations symbols dropouts and other grammatical shortcuts in order to keep pace with the on screen action These type factors vary upon the source of the captioned text material and do not indicate a need for service on the part of the DPTV NTSC ANALOG FEATURE MENU CONTROLS CC NOTE Not all TV programs and product commercials are made for broadcast with Closed Caption CC information included Neither are all Closed Caption modes CAPTION 1 4 or TEXT 1 4 necessarily being used by a broadcast station during the transmission of a
71. ome Theater Surround Sound Reproduction Rear Surround Speakers REAR OF DPTV 50W Max Input HEA cic Right Front External Speaker SYSTEM AUDIO OUTPUT JACKS DTV DIGITAL DTV DIGTIAL AUDIO OUTPUT SPDIF RCA PHONO PLUG CONNECTOR SPDIF is active only when the DPTV is in the ATSC mode Note The Left Right Audio Out jacks send the current available system audio whether NTSC ATSC or Monitor for output to an external amplifier In the case of digital multichannel audio the DPTV downmixes the audio output to a straight 2 channel stereo signal AMPLIFIER RECEIVER SPDIF INPUT CAPABLE 34 BASS TREBLE E DPTV also has individual sound adjustment controls for the ATSC system audio The BASS low frequency and TREBLE high frequency controls may be used to adjust the sound of ATSC TV programs or other external playback source material lt i gt Select Bass or Treble sound control With the Sound Menu on screen move the highlight with the MENU M AY buttons Then press the MENU button CS Press the MENU lt gt arrow buttons to adjust the sound control to levels you prefer lt Press the exit button to clear the screen AUTO VOLUME Pas a function similar to the AVL sound control in the NTSC operating mode the Auto Volume control applies certain value levels to variables within the Dolby standard
72. or such items as speaker volume levels and sound delay as related to speaker distance and listening room size dimensions Select the ATSC Speakers Menu With the DTV Main Menu on screen move the highlight with the MENU M AV buttons Then press the MENU button Press the Menu or gt arrow buttons to adjust the selected Speaker adjustment control Press the Menu M AV buttons to move up and down the list of individual Speaker Menu controls See the Speaker Menu information box to the right for detailed descriptions on the select controls SS Press the exit button to clear the screen SMART HELP Note Other speaker configuration slide switch controls are also located on the rear of the DPTV The FRONT SPEAKERS and CENTER CHANNEL INPUT switches direct the use and audio signal routing for the DPTV s internal cabinet speakers and external output speaker terminals See pages 33 and 34 for further details on the location and use of these additional audio speaker controls Z DTV Main Menu Picture Sound Speakers Features DTV Setup Exit 36 ATSC DIGITAL SPEAKERS MENU CONTROLS Speaker Menu Delay Normal Front in Line Left Right Ov Off Left Right Delay Test Tone Subwoofer Level Back Center Delay control allows the user to adjust center channel speaker sound for situations where external Left Right speaker
73. r to play Center Channel sound through the DPTV s internal cabinet speakers For example With the use of an external Amplifier capable of Dolby Digital 5 1 or Home Theater Surround Sound the Front Left Right Center and Rear Left Right Surround system speakers have their signals supplied by the connections located on the rear of the Amplifier Note When an external Amplifier is used as the audio playback source for the DPT V s Center Channel Input terminals e Place the DPTV s INTERNAL TV SPEAKERS USED AS CENTER CHANNEL switch and the CENTER CHANNEL INPUT switch to the YES position in order for the connection and Center Channel speaker playback to function properly These two slide switches are used in tandem and should both be kept in either the YES position when the DPTV is used for Center Channel Input playback or the NO position when the DPTV uses its own internal speaker system for Surround sound purposes Sony PHILIPS DIGITAL INTERFACE FORMAT SPDIF is the term used for ATSC module digital audio that can be routed to an auxiliary amplifier that accepts such an input signal The DTV Digital Audio Out put jack on the rear of the DPTV is for the connection of SPDIF audio compatible external amplifiers or home theater equipment REAR OF DPTV SURROUND SPEAKERS Left Front External Speaker External Amplifier capable of Dolby Digital 5 1 or H
74. roduct to increase the amount of reusable materials and minimize the amounts which need to be properly disposed Your product also uses batteries which should not be thrown away when depleted but should be handed in and disposed of as small chemical waste Please find out about the local regulations on how to dispose of your old products batteries and packaging materials whenever you replace existing equipment ie nol FIRST TIME SETUP fF Time Setup automatically takes care of some basic control feature settings for you Follow the steps in this section to quickly add area channel numbers into the DPTV s scan system memory and set the DPTV for your connected signal Antenna or Cable You can also set up your TV Guide Plus feature for the first time as well BEGIN lt T Press the MENU M button on the Pronto remote or DPTV An on screen list of NTSC features shows on the MAIN MENU Select 1ST TIME SETUP on the DPTV s Main Menu Selected MENU item is highlighted in RED Press the remote s Menu buttons to move UP DOWN and from SIDE TO SIDE within the list of on screen features Press CH annel A V and VOLume on the DPTV s local keyboard to move UP DOWN and from SIDE TO SIDE within the list of on screen features lt 3 gt Press MENU M button on the remote or DPTV to begin SETUP Follow the instructions shown on the screen to guide you through the First Time Setup and use of your
75. s are in use and their relative distance position from the DPTV s internal cabinet speakers may vary See pages 33 and 34 for further details on front external speakers amplifier surround systems and the use of the DPTV as a source for center channel speaker sound Normal Front in Line is for the speaker arrangement where the center left and right speakers are evenly lined up and roughly equidistant from the user Center Forward setting compensates for a center speaker being placed a few feet in front of the external left and right speakers Center Back setting compensates for a center speaker being placed a few feet behind the position of the external left and right speakers Front Left control adjusts the volume level of the DPTV s left front internal cabinet speaker or the Left Front External Speakers Output terminal source on the rear of the DPTV e Right control adjusts the volume level of the DPTV s right front internal cabinet speaker or the Right Front External Speakers Output terminal source on the rear of the DPTV Rear e On Off control allows the user to turn the rear surround sound signals On or Off to the Surround External Speaker Output terminals on the rear of the DPTV Left control adjusts the volume level of the DPTV s left rear surround sound speaker as connected through the Left Surround External Speaker Output terminal on the rear of the DPTV Right control adjusts the volum
76. sired channel numbers and skips over any unwanted channel numbers PSIP Program and System Information Protocol PTV Projection Television Rear and or Front projection design systems are available Remote Sensor Window A window or opening found on the DPTV control panel through which infrared remote control command signals are received RF Radio Frequency or modulated signal design used as the carrier for television broadcasts RGB Red Green Blue color component inputs used for connection purposes with personal computers PCs and other high definition video devices Second Audio Program SAP Another or additional audio channel provided for in the Multichannel Television Sound MTS broadcast standard A monaural soundtrack included within the recorded or video signal usually containing a second language translation for the displayed programming SDTV Standard Definition Television is a digital television transmission but with approximately the picture quality and aspect ratio equivalent to NTSC video Status Allows the user to quickly confirm what channel number is currently being viewed Status can also be used to clear the DPTV of on screen displays or information rather than waiting for the displays to time out or automatically disappear from the screen Subchannel A complete digital channel number is composed of both a major and minor sub channel number Located within the major chan
77. te de la prise et pousser jusqu au fond Let make things bette INTERNET ADDRESS http www philipsusa com SAFETY INSTRUCTIONS Read before operating equipment This product was designed and manufactured to meet strict quality and safety standards There are however some installation and operation precautions which you should be particularly aware of 1 2 6B 10 Read Instructions All the safety and operating instructions should be read before the appliance is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to Follow Instructions All operating and use instructions should be followed Water and Moisture The appliance should not be used near water for example near a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool etc Carts and Stands The appliance should be used only with a cart or stand that is recommended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn Tilt Stability All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinet design Do not compromise these design standards by
78. ternate Audio preference English The alt ernate audio button on the Pronto remote allows the user to select a language preference for multilingual or alternate language audio track programs that may be received for DTV viewing English is the default language setting When digital broadcast material is received which contains multiple language soundtracks the DPTV will identify find and then select the preferred alternate audio language for sound playback If the selected language preference is not available within the received program material the default audio language is then selected Press the Menu or M button to show on screen controls Press M A or Y buttons to move up or down the list of DTV controls Press the M lt q or P gt buttons to make adjustments to the selected controls exit button Press to clear the DPTV screen after control 4 4 adjustments Also press to see the current channel number on the DPTV screen scroll arrows Press to move to the next or previous page of Pronto controls The touchscreen will display the current control screen s page number and the total number of pages available for the selected device 1 4 2 4 etc 40 Analog db DTV a MONITOR FEATURES MENU CONTROLS VGA SVGA HDCOMPONENT nother function of the DPTV is REAR OF DPTV for the connection and use of Personal Computers PCs and other High Definition HD digital aA B
79. to clear the screen wr pun nol NTSC ANALOG FEATURE MENU CONTROLS CHANNEL MEMORY AUTO PROGRAMMING Y DPTV can automatically set itself for local area or Cable TV channels This makes it easy for you to select only the TV stations in your area when the CHANNEL A Y buttons are pressed NOTE If you went through First Time Setup see page 6 this task has already been completed for you NTSC ANALOG MAIN MENU PICTURE SOUND AMA FEATURES FEATURE MENU INE 1ST TIME SETUP UR CABLE PICTURE TUNING a Select CHANNEL MEMORY Mc y ESAS START AUTO PROGRAMMING AANEEN control EXIT MORE 1 OF 2 CHANNEL M ORY ADD DELETE CHANNELS With the FEATURES MENU on screen move the RED highlight with the MENU M 4e buttons Then press the MENU button Press the MENU AV buttons to select the START AUTO PROGRAMMING option then press the Menu button to begin I START 7 AUTO PROGRAM MING Ee PELE LL AS LAA EXIT The TV shows which channel numbers are SAVED 14 as they are added into memory Auto programming CHANNEL MEMORY is finished shows when the DPTV is through adding channels Pare IF PHILIPS
80. tton Press to see the current channel number on the DPTV screen Also press to clear the DPTV screen after control adjustments dtv freeze Press to freeze or stop the current picture on the DPTV screen Program sound will continue to play Repress the freeze button or wait for a 60 second time out to return to live program action mute button Press to turn the sound OFF on the DPTV Press again to return the sound to its previous level channel scan buttons Press to scan up or down through any ATSC programmed channel numbers volume buttons Press to adjust the DPTV sound level up and down ext input button Press to select the auxiliary input connections available on the rear of the DPTV analog NTSC AUX1 2 3 Monitor VGA and External High Definition EXT HD number buttons Press two number buttons to select single digit major DTV channels Use a four digit channel entry to select ATSC system sub channel programs for example press 0 6 0 1 for sub channel 6 01 See page 5 in the 64PP9901 Quick Use guide for details on the use and selection of sub channels TV Guide Plus buttons TV Guide Plus is not available for use within the DPTV s ATSC or digital TV operating mode See the separate TV Guide Plus program instruction guide for details on how it is used within the analog NTSC operating system E D 12 37pm EW Cura 3 4 Analog BB vtv Al
81. ut possibilities include Left Right audio SPDIF rear speaker connections front speaker connections variable and amplified subwoofer speaker connections VGA SVGA 15 pin D sub female connection for impressive multimedia display of computer source material through the DPTV s Monitor operation mode DPTV SET UP AND QUICK USE GUIDE Use the Set Up Guide supplied with your DPTV information packet for details on Antenna Hook ups First Time Use and Control Descriptions Basic DPTV and Pronto Remote Operation DTV Program Rollout Information As you unpack your DPTV please note that the following items have been included with your set e Owner s Manual and DPTV Quick Use Guide Safety Tip Information Factory Service Center Locations Warranty Registration Card Pronto Remote Control Transmitter Product Package contains dedicated Pronto Owner s Manual information Batteries for Remote Control Use Guide Plus program Setup and Use information Please take a few minutes to complete your registration card The serial number for the DPTV is on the back of the product Refer to the back of this manual for instructions on the cleaning and care of the DPTV Product End of Use disposal Your new digital projection television and its packaging contain materials that can be recycled and reused Specialized companies can recycle your p
82. vide service although there may be a delay if the appropriate spare parts and technical manual s are not readily available MAKE SURE YOU KEEP Please keep your sales receipt or other document showing proof of purchase Attach it to this owner s manual and keep both nearby Also keep the original box and packing material in case you need to return your product BEFORE REQUESTING SERVICE Please check your owner s manual before requesting service Adjustments of the controls discussed there may save you a service call TO GET WARRANTY SERVICE Repair must be performed by an authorized service center or a factory service center If you do not live near a factory service center contact your dealer If your dealer is an authorized service center he will arrange repair If your dealer is not an authorized service center he will direct you to the authorized service center engaged by him to service the products he sells In U S A Puerto Rico and U S Virgin Islands all implied warranties including implied warranties of merchantability and fitness for a particular purpose are limited in duration to the duration of this express warranty But because some states do not allow limitations on how long an implied warranty may last this limitation may not apply to you In Canada this warranty is given in lieu of all other warranties No other warranties are expressed or implied including any implied warranties of merchantability
83. ystem the listener can now attain a true soundstage realism for audio signal separation imaging and pinpoint sound placement Note If the Front External Speaker Out terminals are used for Left Right audio channel playback of Dolby Digital material the FRONT SPEAKER slide switch on the rear of the DPTV must also be placed to the EXT ernal position in order for the connection and signal routing to operate properly E DTV Main Menu Picture Sound Speakers Features DTV Setup Sound Menu Perra PL i Surround Mode Surround Stereo Exit Treble Bass Auto Volume ON compressed Back Surround Mode Dolby Digital 5 1 sound is processed normally directing discrete channel audio sound to 6 speakers DPTV Front Right Center Left speakers two rear Surround speakers and one Subwoofer low frequency speaker For any two channel plain stereo audio arriving within the ATSC Dolby Digital carrier signal the DPTV processes the audio to play standard stereo in the Left Right Front DPTV speakers only Stereo Mode Left Right audio input signals are directed to the DPTV s two front L R speakers ATSC Dolby Digital multichannel sound signals are downmixed to two channels and sent to the Front Left Right DPTV speakers This is to avoid audio distortion on any non Dolby pseudo surround programming that may be received PHILIPS

Philips 64PH9901 Projection Television User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents