Home

Philips 52PFL7803D Fan User Manual

1. TELEVISION VOL CH 7 LS f 1 2 3 I f 3 4 5 6 r a 2 7 8 9 J 7 STATUS EXIT 0 J PHILIPS w 00G 4 Use your TV in digital mode 4 1 Get Started e When the TV is powered on for the first time you are prompted to run auto install to receive the channels that are broadcasted locally e Auto installation takes 20 to 40 minutes depending on the number of channels that are transmitted by the cable provider or broadcaster e When the TV is not receiving any signal from the antenna or cable NO SIGNAL appears on the TV screen This can be caused by the antenna or cable not being plugged in correctly or when the wrong tuner mode is selected e When no transmission is received from the broadcaster NO PROGRAM appears on the TV screen e You cannot receive pay channels when using direct antenna cable connection to the television e When the set top box is connected to the television using coaxial cable auto program the television for the set top box source channel and change the channels at the set top box to view the program e When the set top box is connected to the television using AV connection select the television input source for the set top box to view the program Change the
2. Yes E No Close Press OK to add all services to the favorites list 3 Press lt to return to the previous menu or press DIGITAL MENU to exit Remove all services to the favorite list 1 Press the OK button to remove all the services from the favorite list 2 Select Yes and press OK to confirm removing all the services 3 Press lt to return to the previous menu or press DIGITAL MENU to exit 9 Tip Press ANA DIGI to switch be tween the digital and analog modes 4 9 Update yourTV View the current version information of the TV software or install new versions when they are available Viewing the current software version 1 Press SOURCE and a or to select Digital TV from the source list EN 22 Press DIGITAL MENU to display the on screen menu Select System gt Current Software Version and press OK The software version is displayed System Information H W Version ZDT620 ISDTV V0 1 S W Version LC07B DTM V0 13 Release Time Aug 27 2007 02 10PM Note Screen information may differ depending on your software version Installing new software 1 Switch off the TV set from the wall socket mains Insert your USB device to the USB port at the rear panel of the TV set and switch on the set Press SOURCE and a or to select Digital TV from the source list Press DIGITAL MENU to display the on screen menu Select System gt New
3. 0711 9 The PIN code is reset to the default factory setting of 1234 Please enter your pin code The default pin code is set Please change it to your own system pin code Please enter your system pin code to change setting LLL 10 Enter 1234 with the numeric buttons 0 9 You can continue using this default PIN code or change the PIN code by selecting Change Pin Code in the Access Restrictions menu Restrict access to programs with Maturity rating Restrict access to the digital programs that are rated by the broadcaster using the Maturity rating 1 Enter the Access restrictions menu as described in Turn on Set PIN Protection on the previous page 2 Press w to select Maturity Rating and press OK to see the list of ratings PHILIPS W Setup Access restrictions Access restrictions Maturity Rating Maturity Rating e No maturity blocking Block any rated content Block above 10 years Block above 12 years Block above 14 years l Block above 16 years Close 3 Press a or v to select the rating and press OK to confirm EN 20 Note You are prompted to enter the PIN code if the TV program is blocked by the Maturity Rating filter Enter the PIN code to temporarily access the program Restrict access to TV programs with Block Content 1 Enter the Access restrictions menu as described in Turn on Set PIN Protection on the previous page 2 Press w to select
4. Unrated 8 6 Turn on closed captions No Rating Blockin Closed captions CC are subtitles hidden in the video signals which you can turn on or off unlike the normal subtitles in movies which cannot be turned off Closed captions are subtitles for dialog and descriptions for the hearing impaired Block other programs 1 Press SOURCE and a or to select TV from the source list Block programs that are unrated such as documentaries director s cut edition or 2 Press ANALOG MENU to display the programs that have no advisory data No on screen menu Rating 1 A P Lock 3 Select Features gt Closed Caption and Access Parental Lock menu as press OK described in Access Parental Lock on page 35 LI s Features 2 Press w to select Block Options and Timer Child Lock press OK to select Parental Lock Closed Caption 3 Press v or a to highlight Unrated or No Rating and press OK to select 4 Press OK to select On Demo 4 Press v or a to highlight CC Off CC1 EN 39 CC2 or CC Mute and press OK to select Press lt to return to the previous menu or press ANALOG MENU to exit Closed Caption choices CC Off Turn off closed captioning CC1 Most channels transmit closed captions in CC1 mode Closed captions can be in Spanish Portuguese or English CC2 Broadcasters may transmit closed captions in CC2 mode CC2 is rarely used CC Mute Closed captions in CC1 mode is
5. EN 50 Audio L R cable Red White S Video Good quality S Video provides better picture quality than that of composite video When connecting your device with S Video plug the S Video cable to the S Video connector on the side of the TV You must connect a separate Audio L R cable from the device to the red and white Audio L R input connectors on the side of the TV S Video cable Composite Basic quality Composite video provides basic analogue connectivity usually combining a yellow video cinch cable with red and white Audio L R cinch cable Match the cable colors when connecting to the composite Video and Audio L R input connectors on the side of the TV Composite audio video cable Yellow red and white Note For various device connections to your TV please refer to the Quick Start Guide for detailed instructions EN 51 PHILIPS Be responsible Respect copyrights Specifications are subject to change withoutnotice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners 2008 Koninklijke Philips Electronics N V All rights reserved www philips com 3139 125 39891
6. produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardization for early integration in its products Copyright VESA FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association BBE DIGITAL Manufactured under license from BBE Sound Inc Licensed by BBE Inc under one or more of the following US patents 5510752 5736897 BBE and BBE symbol are registered trademarks of BBE Sound Inc Available on selected models Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world All other registered and unregistered trademarks are the property of their respective owners Contents 7 Use your TV o4225504605n00 545 28 Adjust TV settings 28 Change your picture format 29 1 Important cscs edsinssescesescaes 5 Use Smart Mode settings 30 Use the Surf feature 31 Zz Overview of television controls and mee were CTE ere ee eT ee 7 8 Use mors ol your TV ssrsisissi 32 ae RODEN 2 St tener a area
7. property damage or damage to the unit e Install all batteries correctly with and aligned as marked on the unit e Do not mix batteries old and new or carbon and alkaline etc e Remove batteries when the unit is not used for a long time Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Example of Antenna Grounding as per NEC National Electric Code GROUND CLAMP ELECTR C SERV CE EQU PMENT ANTENNA LEAD N W RE ANTENNA D SCHARGE UN T nec sect on 810 20 GROUND NG CONDUCTORS nec SECT on 810 21 GROUND CLAMPS POWER SERV CE GROUND NG ELECTRODE SYSTEM nec ART 250 PART H 2007 Koninklijke Philips Electronics N V AIl rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of
8. 3 Press v or a to highlight the mode and press OK to select D PHILIPS Ambilight Ambilight Brightness Relaxed Mode Moderate Balance Dynamic 4 Press lt to return to the previous menu or press ANALOG MENU to exit Ambilight modes e Color Produces constant lighting according to the settings in the Color menu e Relaxed Reduces brightness and color to give a more relaxed viewing experience e Moderate Uses the factory defined brightness and color settings e Dynamic The brightness and color changes according to the picture state EN 41 Select Ambilight color 1 Turn on Ambilight as described in Turn on Ambilight on the previous page 2 Press w until Mode is highlighted and press OK to select 3 Press w until Color is highlighted and press OK to select 4 Press vw or a to highlight the color D PHILIPS Ambilight Ambilight Brightness Cool White Mode Blue Color Red Custom Color Green Balance Yellow Magenta Custom 5 Press 4 to return to the previous menu or press ANALOG MENU to exit Use Custom color 1 Turn on Ambilight as described in Turn on Ambilight on the previous page 2 Press w until Custom is highlighted and press OK to enable the Custom Color menu 3 Press lt to highlight Color and press w to highlight Custom Color D PHILIPS Ambilight Ambilight Brightness Mode Color Palette Saturation Custom Color Balance 4 Press v or
9. 4 Use the Advance Picture features 32 Side connectors 000085 7 Use the Timer 0 025 33 Regs COUN TO a retyet aaa 4 Child lock the TV o oo 34 Position the TV 0000 8 Conrolactess to TV channels a 35 Install the remote control batteries 8 Control aecessro TV aroeiamis cess 37 E E I een eae egies Turn on closed captions 39 Wall mount the TV 9 fsa eee anes ee esr cs 40 Use Ambilight i lt cssccae echedaa 40 3 Overview of remote control keys and functions ci 6 bso ei ed cod wie tan deca a 11 9 Use your TV as a computer monitor 4 Use your TV in digital mode 13 Picture settings VGA mode 43 Get Started che hicp caw neote yous 13 Feature settings VGA mode 43 Switch on the TV for the first time 13 Understand the information banner 14 Install channels a a 20 0 ose aecass 4 HRW KB 5 549 59 HSS STH S KO SE Kw Hawes 44 Set your preferences 17 Connect the HD equipment 44 Restoring to default settings 18 Control the TV settings in HD mode 44 Control access to digital channels 19 Use Mode Selection 44 Setup your favorite channels 21 Use Native 1080 mode 45 Update yourTV 44 22 Use Philips EasyLink 45 Get program listings 23 11 Troubleshooting 46 5 Use your TV in analog mode 24 Dee OU CACO recat
10. 7 8 9 DR J 3 STATUS EXIT 0 G I PHILIPS TELEVISION Y J Numeric 0 9 To enter channel number set time or timer STATUS EXIT To display information on the current channel or to exit on screen menus EN 11 15 16 17 18 19 20 21 22 23 SAP To select SAP Stereo or Forced Mono A CH Alternate Channel To display the last viewed channel and the current channel INCR SURR To enable Incredible Surround in stereo mode and Spatial in mono mode CHANNEL LIST To display the list of available channels GUIDE Digital mode only Electronic Program Guide button To get program listings and information OK To select menu items or confirm a selection DIGITAL MENU To switch the menu on or off in digital mode CH Channel To switch to the next or previous channel Dot Digital mode only To enter values for minor channels example 36 5 Q Tip Press OK or press to select menu items or confirm your selection EN 12 AMBILIGHT SMART J A CH ON OFF MODE SAP SURF INCR SURR CH LIST D p ed C BACK GUIDE
11. Accessory device 5 For HDMI connections certain accessory devices have audio output an HDMI audio output setting that must be turned on for setting is incorrect HDMI to HDMI connections Bad picture quality Standard definition 1 Connect the devices via component or HDMI cables with a coaxial channels are not connection as clear as high definition channels No picture or Incorrect channel 1 Ensure you have selected the correct channel sound Incomplete channel 1 If the TV receives channels via an AV connection set installation the TV to the correct source input and perform auto installation again 2 If the TV is connected directly to the wall via a coaxial connection perform auto installation again Cannot control 1 Confirm that the connected devices are EasyLink your TV and compliant and are connected to your TV via an HDMI connected devices cable Not all brands of devices such as DVD players use with one remote the same system as Philips EasyLink Other brands might control not work with Philips EasyLink EN 47 12 Specifications Power output RMS Wat Oooo oo soros Video modes Automatic 4 3 Movie Expand 14 9 Movie Expand 16 9 Subtitle Zoom Super Zoom Wide Screen PC input via HDMI VGA CONNECTIONS CVI In with Audio L R 2 supporting 480i p 576i p 720p 1080i 1080p 24Hz 60Hz HDMI 3 ver1 3a HDMI supporting video 480i p 576i p 720p 1080i 1080p 24Hz 60Hz PC input up to WUXGA Sa
12. Demo 4 Press lt to return to the previous menu or press ANALOG MENU to exit 10 4 Use Native 1080 mode The Native 1080 option in the Display menu is available when you connect HD equipment via HDMI or Y Pb Pr supporting resolution of 1080i Watch the original HD format in true resolution from the input signals 1 Press SOURCE and a or YW to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Features gt Display gt On to watch your programs in the original HD format 1080p D PHILIPS Features Timer Native 1080 Child Lock Parental Lock Mode Selection Close Caption Display Demo 4 Press lt to return to the previous menu or press ANALOG MENU to exit 1080p models HD 480p 576p 720 1080 1080i D 480i 576i format Note Your Philips TV is HDMI compliant If you do not get a good picture it is not a defect of your TV set Please change the video format on your device DVD player cable set top box etc to a standard format For example you should select 480p 576p 720p 1080i or 1080p for DVD players 10 5 Use Philips EasyLink Your TV is enabled for HDMI CEC connections with other devices The following features apply to devices that are CEC compliant and connected to your TV through an HDMI cable One touch play You can control your TV and the devices with one remote control when you connect your TV to devices that
13. Set your preferences Set your language Select your preferred language time zone and digital audio output 1 Press SOURCE and a or to select Digital TV from the source list 2 Press DIGITAL MENU to display the on screen menu 3 Select Preferences gt Language and press gt a Setup Preferences PHILIPS English Portuguese Spanish 4 Press a or W to select Audio or System and press OK 5 Press a or v to select the language and press OK to confirm 6 Press lt to return to the previous menu or press DIGITAL MENU to exit Menu options for language e Audio To select the audio sound language e System To select the menu language 9 Tip Press ANA DIGI to switch be tween the digital and analog modes Set your time zone 1 Press SOURCE and az or YW to select Digital TV from the source list Press DIGITAL MENU to display the on screen menu Select Preferences gt Time Zone and press gt Press a or W to Select the time zone and press OK Press lt to return to the previous menu or press DIGITAL MENU to exit PHILIPS Setup Preferences Preferences Time zone guag JO Broadcasted Time 3h Time Zone Broadcasted Time 2h Transparency ASSE Broadcasted Time 1h _ Broadcasted Time 42h Broadcasted Time 3h Close Select time zone in your location GK Tip Press ANA DIGI to switch be tween the digital and analog modes Se
14. This is BBC Fou This is BBC Fou Record Prev day Nextday More info 16 35 The fairly odd parents 15 miins Genre name Sub genre name Welcome to the show that literally turns hidden treasures into cash and dreams into realities BBC America s latest U S premiere addition to the channel s hugely successful living line up Press lt to return to the previous screen and press to access the Next list Press a or w select the date and press the OK Cy Television TV guide Thu 19 Jul PHILIPS 16 24 Now Next The fairly odd Ready Steady This is BBC Thr S Thur 03 11 ou Newsround sho ir Step inside BBC News Rock from the Record Prev day Next day 16 35 The fairly odd parents 15 miins Press OK to view this channel Press the colour buttons to activate the TV guide The TV guide features are displayed at the bottom of the screen When you have finished press GUIDE to exit Note Sample screens only The Electronic Program Guide may differ from your TV set EN 23 5 Use your TV in analog mode 5 1 Select your location Set the location to suit a shop floor or home environment 1 Press SOURCE and a or v to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Location and press OK 4 Press w or a to Select the location and press OK to confirm D PHILIPS Main Picture Setting Advance Picture Sound Ambilight Features Insta
15. a to highlight Palette or Saturation and press OK to select 5 Press w or A to adjust the settings EN 42 D PHILIPS Custom Color Palette os oS o Saturation m o 6 Press 4 to return to the previous menu or press ANALOG MENU to exit Ambilight Custom colors e Palette Adjusts the color mix e Saturation Adjusts the color intensity of light output Set Ambilight balance Adjust the Ambilight intensity on both sides of the TV 1 Turn on Ambilight as described in Turn on Ambilight on the previous page 2 Press w until Balance is highlighted and press OK to select 3 Press v or a to adjust the Balance D PHILIPS Ambilight Ambilight Brightness Mode Color oO Custom Color Balance LIII i i oo w o 4 Press lt to return to the previous menu or press ANALOG MENU to exit 9 Use yourTV asa computer monitor Connect the TV to a computer via the VGA port to use your TV as a computer monitor Note Refer to the Quick Start Guide for 9 2 Feature settings VGA mode Phase Clock Fine tunes your TV to match the computer s display settings Auto Adjust Synchronizes the TV and computer s Phase Clock rate automatically connecting the computer to your TV y e Reset Overrides with the factory 1 Connect your computer to the TV via i the VGA cable not supplied default settings 2 Press SOURCE to display the au
16. banner When you press STATUS EXIT twice in succession the TV displays the program description The information banner provides useful information about the current program such as channel name program title start time of program and so on 1080 000 0000 TV GloboHD The Fairly Odd P P y 1 Resolution Indicates resolution type for example 1080p 2 Favorite list indication Indicated by a tick if you have added this program to your favorite list setting 3 Channel number In the format 000 0000 EN 14 4 Channel name 5 Program title 6 Program start time 7 Program time progress bar Displays time left indicator bar 8 Program end time 9 Clock Current time 4 4 Install channels Check for new TV channels Check the availability of TV channels that have been launched by the broadcaster after you have installed the TV 1 Press SOURCE and a or v to select Digital TV from the source list Press DIGITAL MENU to display the on screen menu D PHILIPS Setup Favorites Preferences Access Restrictions Installation System Select Installation gt Service List and press Pb J Setup Installation Service List PHILIPS Rearrange Services Close Press a or W to select View new TV Channels 5 If new services are available press gt button to enter into the list of services and press a or Ww to move through the list E Setup Installation Service List
17. button to enter the Favorites setting options Change the Favorite List name 1 Press lt or gt to move the cursor over the character of the name list and press A or V buttons to scroll through the character list 2 Press OK to confirm PHILIPS y Favorite List 1 Favorite List 1 A Setup Favorites kisti Close Enter the name for the list 3 Select Yes and press OK to confirm changing the list name Setup Favorites v Favorite List 1 List N Favorite List 1 eC Favorite List Rename list Do you really want to change name for list PHILIPS Pag No Enter the name for the list Select the TV channels 1 Press lt or gt to navigate the list of channels to select 2 Press OK to select An X marks the check box to indicate the channel or station is selected O Setup Favorites PHILIPS Lgl y Favorite List 1 amp GloboHD SelectTV channels Close Select TV channels for the list Add all services to the favorite list 1 Press OK to add all the services to the favorite list EN 21 PHILIPS mi ote Favorites y Favorite List 1 Add all services rc all services S 2 Select Yes and press OK to confirm adding all the services W setup Favorites amie List 1 PHILIPS y Favorite List 1 Add all services Add all services Do you really want to add all services
18. control keys and functions 10 11 12 POWER 4 To switch the TV to standby mode if it is already turned on Or to turn on TV when it is in standby mode SOURCE To display the input source list or to cycle through list of input sources by repeatedly pressing button SMART MODE To select or cycle through predefined picture and sound settings AMBILIGHT ON OFF To turn on or turn off Ambilight SURF To channel surf up to 8 channels Color buttons Digital mode only To use preset functions on the on screen display ANA DIGI To toggle between analog and digital modes CURSOR To navigate and select menu items and adjust individual settings BACK To return to the previous menu ANALOG MENU To switch the menu on or off in analog mode VOL Volume To turn up or turn down the sound level MUTE To turn the speaker sound on or off O OG OOOO OO 13 14 M N K SOURCE J AMBILIGHT SMART _ovorr MODE SAP _ SURF __INCR SURR_CHLIST WZ WZ D 1 2 3 J l N 4 5 6 amp I D
19. highlight On and press OK to turn on PIN code protection 6 NOTE You cannot navigate the Access Restrictions menu items when Set Pin Protection is set to Off Set Pin Protection must be set to On for program content or channel restrictions to be activated Change your PIN code 1 Enter the Access Restrictions menu as described in Turn on Set PIN Protection on this page 2 Press the w to select Change Pin Code and press OK 3 Enter your PIN code using the numeric buttons 0 9 on the remote control Enter your new PIN code PHILIPS Setup Access restrictions Change PIN Code New system PIN Close New system PIN 5 Enter the new code again to confirm Cy Setup Access restrictions Change PIN Code nter you Pie Wl 7 iter your system EERE ra a O e PIN PHILIPS Re enter system PIN Close Re enter system PIN 6 Press lt to return to the previous menu or press DIGITAL MENU to exit Tip If you have forgotten your PIN code reset the code by pressing 0711 fol lowed by 0711 to enter a new code Reset your PIN code If you have forgotten your system PIN code you can reset it to the default PIN code 7 Enter 0711 with the numeric buttons 0 9 when prompted for the PIN code EN 19 The TV displays Incorrect Pin and prompts you to enter the PIN code again Please enter your pin code Incorrect Pin Pee 8 Enter
20. i 12 Specifications 48 6 Install channels 25 We Conect devices 3 ick ececdine 49 Automatically install channels 25 Connection overview 49 Manually install channels 25 Select connection quality 49 Manage channels 26 1 Important Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Read this user manual before you start to use this product In particular pay close attention to this section and follow the safety and screen care instructions The product warranty does not apply if damage is caused by failing to follow these instructions 1 1 Safety e Two people are required to lift and carry a TV that weighs more than 25 kilos 551b Improper handling of the TV can result in serious injury e To avoid short circuit do not expose the TV remote control or remote control batteries to rain or water e To avoid risk of fire or electric shock do not place the TV remote control or remote control batteries near naked flame sources for example lighted candles and other heat sources including direct sunlight e Do not touch any part of the TV power connector or antenna cable during lightning storms e Do not install the TV in a confined space such as a bookcase Leave a space of at least 10cm four inche
21. or headphones at high volumes Though high volume may sound normal over time it can damage your hearing To protect your hearing limit the amount of time you use earphones or headphones at high volume Although your TV consumes very little power when in standby energy continues to be consumed as long as the mains remain connected and powered When not in use for extended periods of time switch off and disconnect the TV from the mains 1 2 Screen care Turn off and unplug the mains cord before cleaning the screen Clean the screen with a soft dry cloth Do not use substances such as household cleaning agents as these may damage the screen To avoid deformations or color fading wipe off water droplets as soon as possible Do not touch push rub or strike the screen with hard objects as this may damage the screen permanently Where possible avoid stationary images that remain on screen for extended periods of time Examples include screen menus teletext pages black bars or stock market tickers If you must use stationary images reduce the screen contrast and brightness to avoid screen damage EN 6 1 3 Environmental care e This product is designed and manufactured for material recycling e Recycle the product packaging at your local recycling center and dispose of used batteries according to local regulations e Do not dispose the product with household waste Ask your dealer for information on how
22. standby mode and press OK to select 5 Press 4 to return to the previous menu or press ANALOG MENU to exit Tip Press STATUS EXIT to check if the sleep timer is enabled or time remaining for the TV to switch to standby mode To cancel the sleep timer select Off in the Sleep menu Set the TV time 1 Press SOURCE and az or to select TV from the source list Press ANALOG MENU to display the on screen menu 3 Select Features gt Timer gt Time and press OK D PHILIPS Timer Sleep Time Start Time Stop Time Channel No Activate 4 Press the numeric 0 9 buttons of the remote control to enter the time in the 24 hour format For example 13 00 for 1 00 p m 5 Press 4 to return to the previous menu or press ANALOG MENU to exit Set the TV timer 1 Press SOURCE and aw or YW to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Features gt Timer gt Start Time and press OK EN 33 D PHILIPS Timer Sleep Time Start Time Stop Time Channel No Activate Press the numeric 0 9 buttons of the remote control to enter the time in the 24 hour format For example 13 00 for 1 00 p m Press lt to return to the previous menu and select Stop Time and press OK D PHILIPS Timer Sleep Time Start Time Stop Time Channel No Activate Press the numeric 0 9 to enter the time Press 4 to return to the previous menu
23. to safely dispose of the product Uncontrolled waste disposal harms both the environment and human health EEC 2002 96 EC H m e This TV consumes minimal energy in standby mode to minimize environmental impact Active power consumption is displayed at the back of the TV Caution This is Class 1 apparatus It must be connected to a mains socket out with a protective earthing connec tion 2 Overview of Use the side connectors for mobile devices television controls and such as a digital camera or game console You can also connect a pair of headphones connectors 2 3 Rear connectors 2 1 Side controls Use the rear connectors for antenna and we permanent devices such as a high definition 1 VOLUME disc player DVD player or VCR To increase or decrease volume Note For more information about TV connections refer to the Quick Start Guide 2 MENU To display the on screen menus or to exit from the on screen menus The CH buttons can be used to navigate the menu items The VOLUME buttons can be used to select the menu items 3 CHANNEL To select the TV channel 4 POWER To turn off or turn on the TV 2 2 Side connectors 5 BOS EN 7 If necessary refer to the Quick Start Guide for stand mounting in
24. Block Content and press OK 3 Press the a or v buttons to select the type of content to be blocked from access and press OK PHILIPS W Setup Access restrictions Access restrictions Block Content Rating T No Block V e Block Violence Block Sex Block Violence drugs Block Sex drugs m Block Violence sex Block All Close Note A pop up window prompts you to enter the PIN code if the TV program is blocked by the Block Content filter Enter the PIN code to temporarily access the program Restrict access to TV channels 1 Enter the Access restrictions menu as described in Turn on Set PIN Protection on the previous page 2 Press a to select TV Channels and press the button 3 Press a or v buttons to highlight the TV channel to restrict 4 Press OK to restrict the TV channel An X marks the check box to indicate the channel is locked PHILIPS Block Content x TV GloboHD Setup Access restrictions Access restrictions Close Select the TV channels you want to lock Note To unlock the TV channel highlight the TV channel and press OK to uncheck the box 4 8 Setup your favorite channels Create a list of up to four of your favorite TV channels 1 Press SOURCE and a or YW to select Digital TV from the source list 2 Press DIGITAL MENU to display the on screen menu 3 Select Favorites gt list number List 1 to List 4 and press OK 4 Press the
25. I HDMI cable to the correct HDMI port on the TV 3 Press SOURCE on the remote control and select any one of the HDMI sources 1 Ensure the indicator light on the TV blinks when the remote control buttons are pressed 2 Ensure that you are using the remote control supplied with the TV 3 Ensure that the batteries of the remote control are 2 Connect an audio cable to the DVI AUDIO IN port on the TV inserted according to the illustration on the remote control and that the batteries are new 1 Press lt or gt on the remote control to select the best picture format 2 For certain accessory devices the picture format has to be set in the accessory device itself The picture is Insecure incorrect 1 Ensure all the connections are made according to the mostly red and connection color code green or the 2 Push the component cables all the way into the YPbPr picture is missing red when the TV is connected to an sockets on the TV accessory device via component cables No sound on the Volume level is set 1 Increase the volume TV loudspeaker to zero Sound is muted 2 Press on the remote control Headphones are 3 Ensure the headphones are not plugged into the TV connected Audio cable is not 4 For AV connection ensure that the Audio L R cable is connected connected If you are using a component cable ensure that you have not crossed the red audio cable with the red video cable
26. IPS Parental Lock Lock Channel Change Code Cleared Clear All Lock All Movie Rating TV Rating Block Options 3 Press OK to select Yes Note A message is displayed to inform you that the channel is blocked when you try to access it You can choose to enter the Parental Lock access code to view the program Channel 2 Blocked By Channel Blocking Access Code 8 5 Control access to TV programs Use the movie rating lock for certain regions only Control access to movies based on their content as defined by the Motion Picture Association of America MPAA Settings apply to the TV and AV inputs only 1 Access Parental Lock menu as described in Access Parental Lock on page 35 2 Press w until Movie Rating is highlighted and press OK to select 3 Press a or w to highlight your choice of movie rating label and press OK A tick V appears beside the rating label to indicate the rating lock is enabled 4 Press lt to return to the previous menu or press ANALOG MENU to exit D PHILIPS Parental Lock Lock Channel Change Code Clear All Lock All Movie Rating TV Rating Block Options Note Movies are blocked if they fall under the movie rating category that you enabled A message is displayed to inform you that the program is blocked by the movie rating Programs remain locked even after the TV is switched off Enter the Parental Lock access code to view the program
27. PHILIPS View TV Channels 05 1 TV GloboHD EEM lt _ lt _ _ _ _ _ lt lt _ lt _ Signal Strength CU Signal Quality SS SUUCUUCUUCU UO Close Select the service s to change channel For information about how to add new services to your list of favorite channels see Add new channels to your list on this page 6 Press the lt to return to the previous menu or press DIGITAL MENU to exit Tip Press ANA DIGI to switch be tween the digital and analog modes Add new channels to your list Search for new TV channels that have been launched by the broadcaster after the initial installation 1 Press SOURCE and press a or W to select Digital TV from the source list 2 Press DIGITAL MENU to display the on screen menu 3 Select Installation gt Service Setup and press P 5 Setup Installation PHILIPS Service Setup Add newServices Add newServices Add new services Close 4 Press gt to Add new services and press OK to activate the installation A search begins Any new channels are added to the channel list menu The percentage of the installation completed and the number of channels found are displayed 5 When the search is complete press OK to accept the new services 6 Press lt to return to the previous menu or press DIGITAL MENU to exit 9 Tip Press ANA DIGI to switch be tween the digital and analog modes Reinstall all c
28. Register your product and get support at www philips com welcom F at TV 42PFL7803D 52PFL7803D User Manual PHILIPS ee ee ee T 10 11 12 13 14 15 16 IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any of the ventilation openings Install in accordance with the manufacturers instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and third grounding prong The wide blade or third prong are provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to a
29. Software and press OK Press OK to select the USB disk and press OK again to select the filename a Sete Information New Software PHILIPS Select USB disk Select nig Close Select file to upgrade Select Yes and press OK to confirm a Setup Information New Software PHILIPS Select USB disk Select file conima OOOO Do you really want to update Yes M No_ Close Select file to upgrade A pop up window displays an indicator bar while the update is in progress ry Setup Information New Software PHILIPS Select USB disk Select file Updating Programming flash Close Select file to upgrade When the update completes the screen goes blank momentarily 7 Switch off the TV set from the wall socket mains for one to two seconds 8 Switch on the TV set again The new software is installed 4 10 Get program listings Access the Electronic Program Guide which provides detailed information about the digital programs 1 Press SOURCE and az or v to select Digital TV from the source list 2 Press GUIDE on the remote control A list of digital programs in the selected favourites list is displayed 3 Press to access the Now list and press A or W to select a program Dy Television TV guide Thu 19 Jul PHILIPS 16 24 Now Next 16 35 The fairly odd The fairly odd Ready Steady The weakest lin This is BBC Thr Welcome to BB
30. Subsequently all other locked programs are viewable Tip Press STATUS EXIT twice to check which TV or movie ratings are enabled Movie Rating TV Rating G 5 3 Movie Rating e G Suitable for all ages e PG Some material may not be suitable for children e PG 13 Some material may not be suitable for children under 13 years of age EN 37 e R Material not suitable for children under 17 years of age Requires parental guidance e NC 17 Not suitable for children under 17 years of age Has excessive violence sex or offensive language e X Not suitable for children under 17 years of age Content is pornographic Use the TV Rating lock For certain regions only Block content based on TV ratings defined by your broadcaster TV ratings are based on age and content V Violence S Sex L Strong Language D Sexual Dialog V Violence S Sex L Strong Language D Sexual Dialog V Violence S Sex L Strong Language 1 Access Parental Lock menu as described in Access Parental Lock on page 35 2 Press w until TV Rating is highlighted and press OK to select 3 Press w or a to highlight the TV rating label and press OK to select 4 Press v or a to highlight Lock All and press OK to select amp Tip To enable one or more content EN 38 based ratings highlight only those and press OK D PHILIPS TV Rating TV Y Suitable for all children Programs are n
31. Transmitted information is stored on a memory chip to produce flicker free images 8 8 Use Ambilight Watch programs in a unique ambience by producing a soft light glow from the sides of the TV Ambient lighting from the TV provides a more relaxed viewing experience The Ambilight colors changes automatically to match the TV images Turn on Ambilight 1 Press SOURCE and a or v to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Ambilight gt On D PHILIPS Ambilight Ambilight Brightness Mode Balance 4 Press lt to return to the previous menu or press ANALOG MENU to exit Turn off Ambilight 1 Press SOURCE and a or YW to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Ambilight gt Off 4 Press lt to return to the previous menu or press ANALOG MENU to exit Adjust brightness 1 Turn on Ambilight as described in Turn on Ambilight on this page 2 Press w until Brightness is highlighted and press OK to select 3 Press v or a to adjust the ambient brightness level D PHILIPS Ambilight Ambilight Brightness E oS o Mode a wo Balance o sie D 4 Press lt to return to the previous menu or press ANALOG MENU to exit Select Ambilight modes 1 Turn on Ambilight as described in Turn on Ambilight on this page 2 Press w until Mode is highlighted and press OK to select
32. ality Close 4 Press lt and gt to select the channel number and v to select Start Scan 5 Press OK to start the search 6 When the search is complete press OK to accept the new service EN 16 7 Press 4 to return to the previous menu or press DIGITAL MENU to exit 9 Tip Press ANA DIGI to switch be tween the digital and analog modes Change the order of stored channels Change the order of the digital channels that you have stored 1 Press SOURCE and a or YW to select Digital TV from the source list 2 Press DIGITAL MENU to display the on screen menu 3 Select Installation gt Service List gt Rearrange Services and press P PHILIPS Uninstall Services D Setup Installation Rearrange Uninstall services Close Press gt to select Uninstall services and press A or W to select the program to uninstall 5 Press to return to the previous menu and w to select Move services CJ Setup Installation Rearrange Jninstall services S Move services PHILIPS Move Services lt 1 Close 6 Press a or w to highlight the program and press OK to select 7 Press a or W move the program to the order you want and press OK to confirm 8 Repeat the above steps to move other channels 9 Press lt to return to the previous menu or press DIGITAL MENU to exit 9 Tip Press ANA DIGI to switch be tween the digital and analog modes 4 5
33. and select Channel No and press OK D PHILIPS Timer Sleep Time Start Time Stop Time Channel No Activate Press w or a to select the channel number to be activated at the specified time Press lt to return to the previous menu and select Activate and press OK EN 34 D PHILIPS Timer Sleep Time Start Time Stop Time Channel No Activate 10 Press w or a to select Off Once or Daily and press OK to select 11 Press ANALOG MENU to exit 12 Press to switch the TV to standby mode Activate settings e Off Cancels the TV timer e Once Activates TV timer once only e Daily Activates TV timer everyday at this time GS Note If the TV is switched on when the timer activates the TV switches to the channel specified in the TV timer TV timer settings are lost once the TV is switched off via the POWER button on the TV 8 3 Child lock the TV Prevent children from accessing the TV without adult supervision Enable Child Lock 1 Press SOURCE and a or YW to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Features gt Child Lock gt and press OK D PHILIPS Features Timer Child Lock Parental Lock Closed Caption Demo Press v or a to highlight On and press OK Switch off the TV or put it on standby mode Note Once Child Lock is enabled you cannot access any TV channels with the CH buttons on t
34. channels at the set top box to view the program 4 2 Switch on the TV for the first time When you turn on TV for the first time the TV is in digital mode You must set the language and add new services Setup your language and services 1 Press to enter Language and a or v to select your preferred language 2 Press OK to confirm PHILIPS Language English Portuguese Spanish Language Add new services Close Select system menu language 3 Press w to select Add new services 4 Press OK to start the installation The TV searches for the available analog and digital channels PHILIPS Auto Program Channel 32 TV 579 MHz When scanning has completed a pop up window displays information on the number of analog and digital services found EN 13 PHILIPS O Setup Installation E Total 1 Channels Found Current Scanning 69 69 Scan percentage CUO Information Analog TV services 1 Analog Radio services 1 Digital TV services 1 Digital Radion services 0 Yes A service scan is in progress please press OK to stop 5 If no digital channels are detected press ANA DIGI to switch to analog mode 4 3 Understand the information banner When you select a digital program an information banner is displayed at the top of the screen The banner disappears after a few seconds You can also press STATUS EXIT to display the information
35. dio and B P video source list T A Sound Child Lock Features Parental Lock Location Note For supported resolutions refer to Specifications 3 Press v or a until VGA is highlighted and press OK to select You should see your computer display on the TV screen 9 1 Picture settings VGA mode Horizontal Adjusts the picture to the left or right Vertical Adjusts the picture upwards or downwards D PHILIPS Main Picture Setting Sound Features Brightness Contrast Horizontal Vertical Color Temp Location EN 43 10 Use your TV in High Definition mode High Definition HD mode lets you enjoy clearer and sharper pictures using HD equipment 10 1 Connect the HD equipment 1 Connect the HDMI or DVI output from your HD equipment to the HDMI 1 HDMI 2 or Side HDMI socket of the TV Use a DVI to HDMI cable if DVI output is connected 2 Connect the audio cable to the L R audio jacks AV of the TV if you are using DVI output from your HD equipment to connect to the TV 3 Press AV to display the Source List and the a or W to select HDMI 1 HDMI 2 or Side HDMI Source List Side AV GMI CVI 2 VGA HDMI 1 HDMI 2 Side HDMI Digital TV 4 Press lt to return to the previous menu or press ANALOG MENU to exit 10 2 Control the TV settings in HD mode 1 Press SOURCE and a or v to select TV from the source list 2 Press a or v to select Picture Sound or Features a
36. displayed only when the sound is turned off via 69 8 7 Use the Demo modes The Demo mode lets you see the benefits of the new features of your TV 1 5 Press SOURCE and a or YW to select TV from the source list Press ANALOG MENU to display the on screen menu Select Features gt Demo and press OK Press vw or a to highlight Pixel Plus HD Pixel Plus 2HD Dig Natural Motion or 100Hz and press OK to select D PHILIPS Features Timer Child Lock Parental Lock Pixel Plus 2HD Dig Natural Motion 100Hz Closed Caption Demo Press v or a to highlight On and press OK to select EN 40 D PHILIPS Demo Pixel Plus HD Pixel Plus 2HD Dig Natural Motion 100Hz When Demo modes are used the TV displays a vertical split screen showing the new features enabled on one half and the other half without the features Press lt to return to the previous menu or press ANALOG MENU to exit Demo modes Pixel Plus 2HD Like Pixel Plus HD but able to detect and reduce artifacts and noise in your HD content for cleaner and sharper pictures Pixel Plus HD Every pixel is improved to match surrounding pixels for a more natural picture Sharpness depth and vivid colors are achieved from multiple sources like HD and DVD content Dig Natural Motion Reduces the field and line flicker and reproduces smooth movement especially in movies Set the level to Maximum Minimum or Off 100 Hz
37. elect connection quality You can enhance your audio visual experience by connecting your devices with the best possible connectors After connecting your devices be sure to enable them as described in the Quick Start Guide EN 49 HDMI Highest quality HDMI produces the best audio visual quality possible Both audio and video signals are combined in one HDMI cable providing an uncompressed digital interface between your TV and HDMI devices Use HDMI to experience full high definition video Tip If your device only has a DVI con nector use a DVI HDMI adaptor to con nect your device to a HDMI connector on the TV As such a connection does not support sound you must connect a separate audio cable from the device to the Audio L R input at the AUDIO IN connectors on the TV Note Philips HDMI supports HDCP High bandwidth Digital Contents Protec tion HDCP is a form of Digital Rights Management that protects high definition content in DVD or Blu ray Discs Component YPbPr Higher quality Component Y Pb Pr video provides better picture quality than S Video or composite video connections Although component video supports high definition signals the picture quality is analog and lower than that of HDMI When connecting a component video cable match the cable colours to the CVI connectors on the back of the TV Also connect a Audio L R cable to the red and white Audio L R input connectors at CVI
38. ge 2 Press w to highlight Change Code and press OK to select 3 Enter your new four digit access code with the numeric 0 9 buttons D PHILIPS Parental Lock Lock Channel Change Code Clear All Lock All Movie Rating TV Rating Block Options 4 Re enter your new access code Confirmed is displayed PHILIPS Parental Lock Lock Channel Change Code Clear All Lock All Movie Rating TV Rating Block Options Tip If you forget your access code repeat all the steps as described in Access EN 36 Parental Lock Lock channels 1 Access the Parental Lock menu as described in Access Parental Lock on the previous page Press OK to select Lock Channel and press w or A to highlight the channel number Press OK to lock the channel A padlock symbol is displayed beside the channel number PHILIPS Parental Lock Lock Channel Change Code Clear All Lock All Movie Rating TV Rating Block Options Lock all channels 1 3 Access Parental Lock menu as described in Access Parental Lock on the previous page Press w to highlight Lock All and press OK to select PHILIPS Parental Lock Lock Channel Change Code Clear All Lock All Movie Rating TV Rating Block Options Press OK to select Yes Unlock all channels 1 Access Parental Lock menu as described in Access Parental Lock on the previous page 2 Press w to highlight Clear All and press OK to select PHIL
39. hannels This option lets you reinstall all the digital TV channels 1 Press SOURCE and a or YW to select Digital TV from the source list 2 Press DIGITAL MENU to display the on screen menu 3 Select Installation gt Service Setup gt Reinstall services and press gt Setup Installation Reinstall services PHILIPS Total 1 channels found Scan status Scan percentage A service scan is in prog EN 15 Caution Reinstalling services overwrites all your previously stored channels 4 Press OK to start the installation A search is for digital services is started The services are stored automatically When the search is complete the menu indicates the number of digital services found When searching is complete a list of stored channels is displayed 5 Press OK to store the services 6 Press lt to return to the previous menu or press DIGITAL MENU to exit 9 Tip Press ANA DIGI to switch be tween the digital and analog modes Install digital channels manually Manually scan services by entering the frequency of your target channel 1 Press SOURCE and a or v to select Digital TV from the source list 2 Press DIGITAL MENU to display the on screen menu 3 Select Installation gt Service Setup gt Manual install services and press gt Setup Installation Service Setup PHILIPS Manual install services Channel No 2 Frequency 57143 Signal Strength Signal Qu
40. he TV panel or operate any of its buttons except the POWER button The TV displays Locked on the bottom of the screen Keep the remote control away from children to prevent access to the Child Lock menu Disable Child Lock 1 Repeat the above as described in Enable Child Lock on the previous page 2 Press v or a to highlight Off and press OK D PHILIPS Features Timer Child Lock Parental Lock Closed Caption Demo 8 4 Control access to TV channels Parental Lock lets you control the type of TV programs that can be accessed according to program ratings based on age and content Access Parental Lock 1 Press SOURCE and a or YW to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Features gt Parental Lock and press OK 4 When using Parental Lock for the first time enter the factory default code 0711 with the numeric 0 9 buttons 5 When Incorrect is displayed enter 0711 again D PHILIPS Features Timer Child Lock Parental Lock Closed Caption Demo D PHILIPS Features Timer Child Lock Parental Lock Closed Caption Demo 7 Enter your new code again to confirm EN 35 D PHILIPS Features Timer Child Lock Parental Lock Closed Caption Demo You can access the Parental Lock menu now Change Access Code 1 Access the Parental Lock menu as described in Access Parental Lock on the previous pa
41. it 4 6 Restoring to default settings 1 Press SOURCE and a or to select Digital TV from the source list 2 Press DIGITAL MENU to display the on screen menu 3 Select Installation gt Restore Default and press P m Setup Installation Installation PHILIPS Restore Default Restore Default Restore Default Close Highlight Yes to confirm restoring the settings to default Settings restored to default Stored channels Cleared Program list Cleared Favorite list List names set back to default names Locked TV channels Cleared Maturity rating Blocking cleared e Audio language Set to Brazilian Portuguese e Menu language Set to Brazilian Portuguese e Digital audio output Set to PCM e Time zone Set to Broadcasted time e Pin Code Reset to 1234 4 7 Control access to digital channels Restrict access to the digital channels by blocking them with an access PIN code Turn on Set PIN Protection 1 Press SOURCE and a or v to select Digital TV from the source list 2 Press DIGITAL MENU to display the on screen menu 3 Select Access Restrictions and press gt You are prompted for the PIN code Please enter your pin code The menu is protected Please enter your system pin code TI 4 Enter the default PIN code 1234 with the numeric buttons 0 9 You can access the menu now using the default PIN code 5 Press the a or v button to
42. ll Location Note To select your menu language refer to Set your language on page 17 EN 24 6 6 1 Install channels Automatically install channels 1 Press SOURCE and az or to select TV from the source list Press ANALOG MENU to display the on screen menu Select Install gt Auto Program and press OK D PHILIPS Auto Program Auto Program starts scanning for channels automatically When scanning is complete the first installed channel is displayed Press lt to return to the previous menu or press ANALOG MENU to exit 9 Tip To cancel or interrupt auto search 6 2 Manually install channels ing press ANALOG MENU Only chan nels found before interruption are stored Manually set the TV tuner and system and fine tune the channels Change the Tuner Mode Manually set the tuner system if you have problems using Auto Program to search for channels 1 Press SOURCE and az or YW to select TV from the source list 2 Press ANALOG MENU to display the 5 on screen menu Select Install gt Tuner Mode and press OK Press v or a to select Auto Antenna or Cable and press OK to select D PHILIPS Install Tuner Mode Auto Program Antenna Manual Cable Name Fav Program Press lt to return to the previous menu or press ANALOG MENU to exit Tuner Modes Auto Automatically detects if the cable signal input is present Antenna Detects antenna sig
43. ltimately overturn the product e Also do not endanger yourself or children by placing electronic equipment toys on the top of the cabinet Such items could unsuspectingly fall from the top of the set and cause product damage and or personal injury Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer Power Lines An outdoor antenna should be located away from power lines Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electric Code ANSI NFPA No 70 1984 provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure below Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings a Warning To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus Battery Usage CAUTIONG prevent battery leakage that may result in bodily injury
44. n TV mode only 1 Press SOURCE and a or YW to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Install gt Manual gt Name and press OK D PHILIPS Install Tuner Mode Auto Program Manual Name Fav Program 005 SPORI 4 Press OK to select the first channel number on the list 5 Press OK to start naming the channel 6 Press gt until a rectangular block cursor appears next to the channel number 7 Press w or A to cycle through the list A Z 0 9 to select the characters or numbers to use for the channel name 8 Press OK to move the cursor to the second space and assign the next character or number You can use up to 5 characters or numbers to name your channels 9 Press OK to store the name of the channel The channel number and name are displayed on the top left of the screen 10 Press 4 to return to the previous menu or press ANALOG MENU to exit Store your favorite channels Fav Program lets you store only the channels you want on a favorite list 1 Press SOURCE and az or YW to select TV from the source list Press ANALOG MENU to display the on screen menu Select Install gt Fav Program and press OK The list of channel numbers is displayed on the right panel All channel numbers with a tick V are marked as favorite channels D PHILIPS Install Tuner Mode Auto Program Manual Name Fav Program Pres
45. nals and searches for all antenna TV channels available in your local area Cable Detects cable signals and searches for all cable TV channels available in your local area Change the TV System 1 Press SOURCE and a or WY to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Install gt Manual gt System and press OK 4 Press v or a to select Auto NTSC PAL M or PAL N and press OK to select EN 25 D PHILIPS Manual System Fine Tune 5 Press 4 to return to the previous menu or press ANALOG MENU to exit TV Systems Auto Detects the tuner system automatically NTSC For North American and some South American countries PAL M For Brazil PAL N For Argentina Uruguay and Paraguay Fine tune your channels Fine tune the channels after searching them automatically by using Fine Tune 1 Switch to the channel number to fine tune Press SOURCE and a or YW to select TV from the source list Press ANALOG MENU to display the on screen menu Select Install gt Manual gt Fine Tune and press OK D PHILIPS Manual System os Fine Tune ae he a oO 5 Press w or a to manually fine tune the EN 26 channel reception 6 Press lt to return to the previous menu or press ANALOG MENU to exit 6 3 Manage channels Name your channels Assign a short name for your channels with the Name This is available i
46. nd press OK to select 3 Press a or w to highlight the settings EN 44 and lt or gt to adjust the settings 4 Press lt to return to the previous menu 5 Press lt to return to the previous menu or press ANALOG MENU to exit Picture menu e The Picture menu options are Brightness Color Contrast Sharpness Horizontal Vertical and Color Temp e All the options work the same way as the ones in Picture menu except for Horizontal and Vertical e Horizontal lets you adjust the horizontal position of the image e Vertical lets you adjust the vertical position of the image Sound menu e The Sound menu options are Equalizer Balance AVL and Incr Surround All the options work the same way as the ones in the TV Sound menu Features menu e The Features menu options are Timer Child Lock Parental Lock and Active Control All the options work the same way as the ones in the TV Features menu except for Mode Selection 10 3 Use Mode Selection Mode Selection options are available in the Features menu when you connect HD equipment via HDMI supporting resolutions of 480p 720p or 1080p You can select PC or HD mode 1 Press SOURCE and a or to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Features gt Mode Selection gt PC or HD and press OK D PHILIPS Features Timer Child Lock Parental Lock Mode Selection Closed Caption Display
47. ndoy power Wani Accessories Power cord Quick Start Guide User Manual Remote control AAA batteries x2 Set dimensions 1046 x 645 x 108 1 301 x 798 x 141 W x H x D mm Set dimensions with stand 1046 x 716 x 262 1 301 x 875 x 325 W x H x D mm Note Specifications subject to change without notice EN 48 13 Connect devices 13 1 Connection overview 4 5 SPDIF OUT oo x VGA 000 C 1 Antenna input 2 CVI 1 Component video input Y Pb Pr and Audio L R connectors for DVD digital receiver or game console etc 3 CVI 2 Second component video input 4 AVI IN Composite video input to be used together with Audio L R connectors for camcorder game console etc SPDIF Out Digital audio out Audio IN for VGA Service ports For service personnel SS a e HDMI 1 In HDMI in connector for Blu ray Disc player HD digital receiver or game console etc 9 HDMI 2 In Second HDMI in connector 10 VGA Video Graphics connector for personal computers HDMI In Side See HDMI 1 In description 1 12 13 14 L AUDIO R VIDEO Headphones Side Stereo Mini Jack Video Side Video input connector to be used together with Audio L R connectors for camcorder game console etc S Video Side S Video input connector to be used together with Audio L R connectors for camcorder game console etc 13 2 S
48. nu or press ANALOG MENU to exit Active Control settings e Off Turns off Active Control e On Turns on Active Control e On Light Sensor Uses a sensor to adjust the picture brightness depending on the room light conditions Use Artifacts Reduction and Dig Natural Motion Artifacts Reduction smoothens the transitions on digital pictures Dig Natural Motion reduces the field and line flicker and reproduces smooth movement especially in movies 1 Press SOURCE and a or YW to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Advance Picture gt Artifacts Reduction or Dig Natural Motion and press OK 4 Press v or a to highlight Off or On and press OK to select PHILIPS Advance Picture Contrast Active Control Artifacts Reduction Dig Natural Motion 5 Press 4 to return to the previous menu or press ANALOG MENU to exit 8 2 Use the Timer To switch the TV to standby mode or to a specified channel at a specified time from standby mode or while the TV is switched on Set the sleep timer 1 Press SOURCE and a or YW to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Sselect Features gt Timer gt Sleep and press OK D PHILIPS Timer Sleep Time Start Time Stop Time Channel No Activate 4 Press v or A to select the number of minutes remaining before the TV automatically switches to
49. ot expected to frighten children TV Y7 For children 7 years or older who can tell make believe from reality Some mild fantasy violence or comedic violence Programs may frighten younger children under 7 years of age TV Y7 FV Fantasy violence more intense or combative than those in TV Y7 category TV G Suitable for all children but not designed specifically for children TV PG Parental guidance needed Some violence strong language sexual situations or suggestive dialog Parents should watch these programs with their children TV 14 Not suitable for children under 14 years of age Content has violence strong language sexual situations or suggestive dialog TV MA For adult viewing Not suitable for children under 17 years of age Note The screen displays a message that the program is blocked when your programs fall under the TV rating category that you enabled Programs remain locked even if you turn off and turn on the TV again Enter your access code to view the program PHILIPS Block Options a T No Rating Channel 5 Blocked By Blocking TV 14 Access Code Note Programs with no rating or Unblock programs unrated are blocked 1 Access Parental Lock menu as described in Access Parental Lock on page 35 2 Press w to select Block Options and ee press OK to select No rating Access Code 3 Press w or A to highlight Off and press OK D PHILIPS Block Options
50. rews in a secure location for future reinstallation Secure the VESA compatible wall bracket to the TV Connect the antenna cable mains cord and all other devices to the back of the TV as described in the Quick Start Guide 1 Locate the four mounting nuts at the back of the TV EN 9 2 Align the plate bracket to the four mounting nuts placing the spacers not supplied between the plate bracket and the mounting nuts Using a spanner insert the bolts through the plate bracket and spacers tightly securing the bolts to the mounting nuts 3 Continue with the instructions provided with your VESA compatible wall bracket A WARNING Use the correct bolts and spacers see table to secure the VESA compatible wall bracket to your TV Note Depending on your VESA compatible wall bracket you may need to separate the mounting plate from the wall bracket for easier installation Refer to your VESA compatible wall bracket documentation for instructions TV screen VESA compatible wall Bolt and spacer type Special instructions size in cm bracket mm 32 82cm Adjustable 300 x 300 42 107cm Fixed 400 x 400 or larger EN 10 4 of M6 x 10mm steel Adjust bracket to bolt or 200 x 300 4 of M6 x 50mm steel bolt before securing to with 40mm spacer the TV 4 of M8 x 15mm steel bolt or 4 of M8 x 55mm steel bolt with 40mm spacer 3 Overview of remote
51. rom Surf list 1 2 Press SURF to display the Surf list Press v or a to highlight the channel number and press OK to remove the channel from the Surf list Repeat the above steps to remove more channels while the Surf list is currently displayed EN 31 8 Use more of your TV 8 1 Use the Advance Picture features Use Contrast Contrast optimizes the contrast for overall picture quality 1 Press SOURCE and a or YW to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Advance Picture gt Contrast and press OK 4 Press wv or a to highlight Off or On and press OK to select PHILIPS Advance Picture Contrast Active Control Artifacts Reduction Dig Natural Motion 5 Press 4 to return to the previous menu or press ANALOG MENU to exit Use Active Control Active Control optimizes picture quality by measuring and analyzing the incoming signal to automatically adjust the picture quality settings 1 Press SOURCE and a or YW to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Advance Picture gt Active Control and press OK 4 Press v or a to highlight Off On or EN 32 On Light Sensor and press OK to select D PHILIPS Advance Picture Contrast Active Control On Artifacts Reduction On Light Sensor Dig Natural Motion 5 Press lt to return to the previous me
52. s around the TV for ventilation Be sure air flow is not obstructed e If mounting the TV on a flat surface be sure to use only the supplied stand and to mount the TV on a level solid surface Do not move the TV if the stand is not properly screwed to the TV Wall mounting of the TV should only be performed by qualified personnel The TV must only be mounted on an appropriate wall bracket and on a wall that can safely hold the weight of the TV Improper wall mounting can result in severe injury or damage Do not attempt to wall mount the TV yourself If the TV is mounted on a swivel base or swivel arm ensure no strain is placed on the power cord when the TV is swivelled Strain on the power cord can loosen connections and cause arcing or fire Do not place the TV on the cord or anything else that can pinch the cord or loosen the mains plug An improperly connected mains plug or damaged mains cord can cause arcing fire or electric shock Be sure that you have full access to the mains cord for easy disconnection of the TV from the mains When disconnecting the TV from the mains be sure to e Turn off the TV then the mains power if available e Unplug the mains cord from the mains socket outlet e Unplug the mains cord from the power connector at the back of the TV Always pull the mains cord by the plug Do not pull the mains cord EN 5 Permanent hearing loss may occur if you use earphones
53. s OK to select the first channel number on the list or press to move down the list Press OK to remove the tick or add the tick to the corresponding number Only channel numbers with the tick are added to your favorite list When you use the CH buttons on the remote control only your favorite channels are accessible D PHILIPS Install Tuner Mode Auto Program Manual Name 7 Press 4 to return to the previous menu or press ANALOG MENU to exit Tip Press the numeric 0 9 to access channels not on the favorite list EN 27 7 Use yourTV 7 1 Adjust TV settings Adjust your picture settings 1 Press SOURCE and a or WY to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Picture Setting and press OK 4 Press wv or a to highlight the menu items and press OK to select D PHILIPS Picture Setting Brightness Color Contrast Sharpness Tint Color Temp gt e i U ull en ote sa Un ao ZS oo 4 5 Press w or a to adjust the settings of the menu items Some items have the level indicator bar while some have discreet settings such as Cool Normal and Warm D PHILIPS Picture Setting Brightness Color Contrast Sharpness Tint Color Temp 6 Press 4 to return to the previous menu or press ANALOG MENU to exit Picture settings e Brightness Adjusts the brightness e Color Adjust
54. s color saturation EN 28 e Contrast Adjusts the contrast e Sharpness Adjusts the detail level of the picture e Tint Adjusts the detail of the skin tones of the picture TV or AV modes only e Color Temp Sets the color to Cool more blue Normal balanced or Warm more red Adjust your sound settings 1 Press SOURCE and a or v to select TV from the source list 2 Press ANALOG MENU to display the on screen menu 3 Select Sound and press OK D PHILIPS Sound Equalizer Balance Auto Vol Leveler Incr Surround BBE SAP Forced Mono Press w or a to highlight the menu items and press OK to select 5 Press w or a to adjust the settings of the menu items D PHILIPS Equalizer 120Hz 200Hz 500Hz gt oi oO 1200Hz 3000Hz 7500Hz 12000Hz ea a S Some items have the level indicator bar some have discreet settings such as Mono Spatial or On and Off D PHILIPS Sound Equaliser Off I Balance Auto Vol Leveler Incr Surround BBE SAP Forced Mono D PHILIPS Sound Equaliser Balance Spatial Auto Vol Leveler a a Incr Surround BBE SAP Forced Mono 6 Press lt to return to the previous menu or press ANALOG MENU to exit Sound settings e Equalizer Adjusts each individual frequency tone e Balance Adjusts the left and right speaker sound level e Auto Vol Leveler Controls sudden sound level increase when changing channel
55. s displayed in its original proportions Smart Mode settings e Personal Based on the settings you customized in the Picture Setting menu e Sports Vivid picture settings and clear sound for high action 7 3 Use Smart Mode settings Standard For normal TV viewing Smart modes are preset settings to Movie Brilliant picture settings for a match the different viewing and listening cinematic experience environment 1 e Game Optimized for PCs and game Press SMART MODE repeatedly to consoles cycle through the available settings e Power Saver Eco friendly settings to The settings are displayed at the bottom reduce power consumption of the screen Note The Power meter indicates the power consumption for each mode For example 10 means this mode uses 10 of the TV s total power consumption EN 30 7 4 Use the Surf feature Store up to 8 of your favorite channels in the Surf list Add channels to your Surf list 1 2 3 4 Press the numeric 0 9 buttons or CH to switch to your favorite channel Press SURF to display the Surf list Only one channel number is displayed on the list This is the same channel number currently selected Press OK to add the channel to the Surf list A tick V is displayed beside the channel number to indicate that it is stored in the Surf list Repeat the above steps to add more channels to the Surf list Remove channels f
56. s or during advertisement slots e Incr Surround Enhances stereo effect Select Incr Surround or Stereo when in stereo mode or Mono or Spatial when in mono mode e BBE Restores clarity and presence for better speech intelligibility and musical realism e SAP Secondary Audio Programming Activates alternative languages or commentary e Forced Mono Select Off to leave broadcast signal as is Select On to force the signal to mono Note Select Stereo or Incr Surround modes when the TV broadcast is in stereo Press INCR SURR to toggle with the sound modes 7 2 Change your picture format Select various screen formats to suit the type of programs you watch Press lt or gt repeatedly to cycle through the available picture formats Picture Formats 4 3 The entire picture is reproduced on the screen with black bands on the left and right of the screen Movie Expand 14 9 The picture is enlarged to fit horizontally with black bands visible at the sides of the screen Movie Expand 16 9 The picture is enlarged to fill up the screen The top and bottom of the picture is cropped Subtitle Zoom The 4 3 format program is displayed on the entire screen EN 29 leaving the subtitles area visible The top of the picture is cropped Personal Superzoom Removes black bands on the sides of the screen of 4 3 format programs Personal OL Widescreen The picture i
57. site video and audio output e SIDE AV Headphone jack Composite video and audio and S Video input e CVI 1 Component video Y Pb Pr with Component audio input e CVI 2 Component video Y Pb Pr with Component audio input e VGA Video Graphics Array with audio input e HDMI 1 High Definition Multimedia Interface input e HDMI 2 High Definition Multimedia Interface input Side HDMI High Definition Multimedia Interface input Refer to Quick Start Guide for connection instructions 2 7 Wall mount the TV Q WARNING Wall mounting the TV should only be performed by qualified installers Konin klijke Philips Electronics N V bears no responsibility for improper mounting that results in accident or injury Use VESA compatible bracket 1 Purchase a VESA compatible wall bracket Depending on the size of your TV screen purchase one of the following wall brackets 2 Remove the TV stand Note These instructions are only applicable to TV models with mounted stands If your TV stand is not mounted see Secure the VESA compatible wall bracket to the TV on this page Carefully place the TV face down on a flat stable surface that is covered by soft cloth The cloth should be thick enough to protect your screen 3 Using a cross head screwdriver not supplied unscrew the four screws that secure the stand to the TV 4 Firmly pull the stand from the bottom of the TV Place both the stand and sc
58. structions 2 4 Position the TV Consider the following before positioning your TV e The ideal viewing distance for watching TV is three times its screen size e Position the TV where light does not fall directly on the screen e Connect your devices before you position your TV e Your TV is equipped with a Kensington Security Slot at the back of the TV If connecting an anti theft Kensington lock not supplied position the TV within reach of a permanent object such as a table that can be easily attached to the lock e For the best Ambilight effect position the TV 10cm four inches to 20cm eight inches away from the wall Ambilight also works best in a room with dim lighting EN 8 2 5 Install the remote control batteries 1 Slide the battery cover off the back of the remote control 2 Insert the two supplied batteries Be sure the and ends of the batteries line up with the markings inside the case 3 Slide the cover back into position Note Remove the batteries if not using the remote control for an extended period of time 2 6 Use the Source List The source list lets you select the audio and video source that your device is connected to 1 Press SOURCE to display the audio and video source list 2 Press v or a to highlight your AV source and press OK to select Source List e TV Normal TV broadcast via the 75 ohm antenna connector e AV Compo
59. support One touch play For example when you press the play button on your DVD remote control your Philips TV automatically switches to the correct channel to display the DVD content One touch Standby You can use your TV s remote control to put the devices into standby when you connect your TV to devices that support One touch standby Press and hold the on the TV s remote control for 3 4 seconds EN 45 11 Troubleshooting Note Before calling Customer Service refer to the troubleshooting topic below which may help address and resolve your problem No power or indicator light Error message on the screen with HDMI connection No sound is detected from the PC TV does not respond to the remote control The picture is distorted It is stretched out has short fat black bars on the side or top EN 46 The TV is not connected to the power High Bandwidth Digital Content Protection HDCP authentication fail Incorrect HDMI port is connected Audio cable is not connected Batteries are installed incorrectly or low battery power Broadcast video format What should you do 1 Press at the right side of the TV or press on the 2 Ensure the power cord is connected tightly to the TV 2 Press SOURCE on the remote control to switch to 3 Reset the accessory device and the TV Turn on the TV Select the HDMI channel Turn on the accessory device 1 Connect a DV
60. t your digital audio output 1 Press SOURCE and a or YW to select Digital TV from the source list Press DIGITAL MENU to display the on screen menu Select Preferences gt Digital Audio Output and press P Press a or W to select AAC or PCM output EN 17 PHILIPS Digital Audio Output 5 Setup Preferences Preferences _Digital Audio Output Close SelectAAC for 5 1 system 5 Press 4 to return to the previous menu or press DIGITAL MENU to exit Digital Audio Output AAC Advanced Audio Coding AAC is a very high quality audio encoding and noise reduction system It is the audio system you hear in High Definition Television HDTV and digital broadcast TV DTY PCM Pulse Code Modulation PCM is a way of transmitting uncompressed digital audio PCM is used by Audio CDs GK Tip Press ANA DIGI to switch be tween the digital and analog modes Set your menu transparency Change your menu display from the default opaque to different levels of transparency 1 Press SOURCE and a or YW to select Digital TV from the source list Press DIGITAL MENU to display the on screen menu Select Preferences gt Transparency and press EN 18 D Setup Preferences PHILIPS Preferences Transparency 20 40 Transparency 60 80 Close Press the a or v button to select the level of transparency Press 4 to return to the previous menu or press DIGITAL MENU to ex
61. their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Philips Service Centers and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in this manual any adjustments or assembly procedures not recommended or authorized in this manual shall void the warranty Pixel characteristics This LCD product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop
62. void injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped This product may contain lead and mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industries Alliance www eiae org Damage Requiring Service The appliance should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged or B Objects have fallen or liquid has been spilled into the appliance or 18 19 20 2 22 C The appliance has been exposed to rain or D The appliance does not appear to operate normally or exhibits a marked change in performance or E The appliance has been dropped or the enclosure damaged Tilt Stability All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinet design Do not compromise these design standards by applying exces sive pull force to the front or top of the cabinet which could u

Philips 52PFL7803D Fan User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents