Home

Philips 42PF9641D/10 TV Receiver User Manual

Contents

1. The Teletext menu offers various functions to control teletext Menu Reveal Off 1 Switch teletext on and press the MENU BROWSE key to activate the menu Cycle subpages Off 2 Press the cursor up down to select the menu items Language Gr Il 3 Press the OK key to activate 4 Press the MENU BROWSE key to leave the teletext menu Reveal Reveals conceals hidden information on a page such as solutions to riddles and puzzles Cycle subpages if subpages are available Makes the subpages cycle automatically o Press the OK key to activate and to deactivate again Language If the displayed characters on screen do not correspond with the characters used by the teletext broadcaster you can change the language group here Select Group I or Group II with the OK key 41 Teletext Continued Digital text only for UK Some digital channels offer dedicated digital text services for example BBCi 1 Press to switch Digital text on Note UK only Digital text is displared when programmes are carrying digital text or interactive services 2 To use the digital text follow the instructions on screen 3 Depending on the service you may be asked to use the cursor keys the OK key the coloured keys the teletext key and sometimes the digit keys 4 When you have finished watching teletext select a different channel with the P keys or follow the instructions on screen to return
2. d Reset to standard Use the cursor keys to select Colour Relaxed Moderate or Dynamic Colour this will show constant light according to the settings in the Colour menu below It allows manual fine tuning in the next Ambilight menu items The options Relaxed Moderate or Dynamic will dynamically match brightness and colour to the screen content The selection made will effect the speed which determines the viewing impression For example in Relaxed mode the rate of brightness and colour change as predefined in the factory is smoothly and soft which gives you an immersive yet relaxed viewing in Moderate mode the rate of brightness and colour change can be experienced as between Relaxed and Dynamic in Dynamic mode the rate of brightness and colour change is more quick and dynamic This gives you full immersion and involvement with the screen content Picture Sound Ambilight Separation Balance Notes the rate of change is limited as not to cause uncomfortable sensations according to the selection made some Ambilight menu items will be downlighted and can not be selected Colour Note only available when Colour has been selected in the Mode menu above Allows you to select or adjust the colour of the light to your own personal choice Warm white is matched to that of most normal lightbulbs Select this setting if you want the Ambilight to fit best with
3. Ambilight in standby mode When the TV is switched off the ambient lights will also be switched off When the TV is in standby mode ambilight can be used to provide a unique ambience for the room Press the Ambilight key on the remote control to switch between Ambilight On or Off See Use of the remote control p 6 o Press the MODE key repeatedly to toggle through the Ambilight modes Note when the TV is switched to standby and you switch Ambilight On then less Ambilight modes are available Caution Infrared interference To avoid bad infrared remote control reception place your peripheral equipment out of sight of the ambient lights of your TV Ambilight does not function well when the room temperature is less than 59 F 15 C 22 Adjust feature menu settings EN The Features menu allows you to control the settings of special TV functions features and accessory equipments TV menu Features TV settings 1 Press the MENU BROWSE key on the remote control ERNEUT gt main menu appears 2 Select TV menu and press the cursor right installation 33 gt The TV Menu is moved to the left alo 3 Select Features and press the cursor right ange code gt Features menu is moved to the left panel 0 4 Use the cursor up down to select the Features menu items 5 Press the cursor right to enter the selected Features Info menu item 6 Use the cursor keys to adjust the
4. A ANDO AUDIO 1 Connect the three separate component video cables 1 to the YPbPr jacks on the DVD player OWO a and to the Pb and Pr jacks of EXT3 on the TV N Q Connect the audio cable to the digital out of SR epee the equipment and to the DIGITAL AUDIO IN connector of the TV EXT3 DIGITAL Select the equipment you have connected in the YPbPr AUDIO IN Installation menu Select your connections p 32 and link it to EXT3 Also select DIGITAL EXT3 AUDIO IN R L d ad AUDIO IN in the same Connections menu In case of a DVD player with analogue audio connect the audio cable to the DVD s audio L and R jacks and to the AUDIO IN L R jack of A EXT3 3 fs 5 Incase of a HD receiver and or a satellite receiver also connect the cable TV cable and or unu the satellite antenna cable and the aerial cable 5 DVD STB Notes cables are often colour coded Connect red to red white to white etc the labels for the component video sockets may Cw m DIGITAL differ depending on the DVD player connected omn Although the abbreviations may vary the letters e amp B and R stand for the blue and red component e 8 pm signals respectively and Y indicates the luminance signal Refer to the DVD player s DIGITAL a AUDIO our EU AUDIO IN YPbPr 2 instructions for use for definitio
5. x Jum Inom J L rc vea J antennas 750 lex Com 8 AUDIO NUR DIGITAL i AUDIO ge a 3 IN r3 Svs 1 DVD recorder 1VCR 2 DVD recorders AA A DVD player PC DVI O 2VCRs Oee n m E 2 DER Ec Cinema HD receiver DVD Em Decoder amplifier us Decoder HD receiver Game console A 45 Connect a VCR or DVD recorder Warning do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display Keep a minimum distance of 0 5 m from the screen With a eurocable ey OOO 1 Connect the aerial cables 1 and 2 as shown SAT Be Cm 9 Len 2 Connect the eurocable 3 as shown EXT 1 2 3 Make your selection of the source to which the VCR has been connected in the Installation o eal menu Select your connections p 32 ar Lt RECORDER With the aerial cable only 1 Connect the aerial cables 1 and 2 as CABLE shown ANTENNA 2 Tune in your recorder s testsignal and store the testsignal under programme number 0 2 See Analogue manual installation p 29 See also the handbook of your recorder RECORDER Connect a decoder and a VCR Connect a eurocable 4 to your decoder and ar E pow to the special euroconnector of your recorder pum See also the handbook of your recorder RECORDER DECODER Tip you can also connect your decode
6. Consumer Care on the www philips com support website 58 Annex 1 Continued EN TV menu Local software upgrade procedure Installation Software upgrade New software or the currently installed software version can also be obtained from the www philips com support Time zone website Channels 1 Go to www philips com support using the web browser Connections ot your 2 Follow the procedure to find the information and the software related to your TV 3 Select the latest software upgrade file and download it to you PC 4 Decompress the ZIP file Rename the resulting file autorun upg to for ex upgrade upg Move the renamed file to the subdirectory Upgrades Factory settings Software upgrade Info Remark if there is no subdirectory Upgrades present please create one 5 Insert the portable memory that contains the downloaded software upgrade 6 Select Software Upgrade in the Installation menu Go to Local upgrades The TV will list all compatible software available on the USB portable memory and display the data for each selected upgrade version 7 Select the correct upgrade version and press the red colour key to start the upgrade Your TV will restart and will automatically go to the upgrade mode After a few seconds it will display the status of the upgrade procedure Warning if you try to upgrade to a software version equal
7. gt TV Menu is moved to the left 3 Select TV settings and press the cursor right gt The TV settings menu is moved to the left panel 4 Select Sound and press the cursor right gt The Sound menu is moved to the left panel 5 Use the cursor up down to select the Sound menu items 6 Press the cursor right to enter the selected Sound menu item Note dependent on the input signal one or more menu items may not be selectable 7 Use the cursor keys to adjust the settings 8 Press the cursor left to return to the Sound menu Equalizer Allows you to change the frequency response of the sound to match your personal taste Tip this function is also accessible via the OPTION key on the remote control Volume Allows you to adjust the sound output level Balance Allows you to adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position Digital audio language only with Digital TV broadcasting Allows you to select an audio language out of the list of the available broadcasted languages for the current digital programme Note if there is more than one variant for an audio language then select one of the variants To permanently change the audio language use the Language menu in the Installation menu Tip this function is also accessible via the OPTION key on the remote control Adjust sound menu settings Continued EN TV menu TV settings Sound S
8. Daily 7 Select Time and enter the time with the digit keys or with the cursor up down 8 Press the OK key to activate 9 Press the cursor left to return to the Features menu or press the MENU BROWSE key to switch off the menu Ur WN SS Note From now every week your will automatically switch to the selected channel on the selected day at the selected time until the On timer function is switched off again Note only one On timer can be set 25 EN Adjust feature menu settings Continued TV menu Features Common interface 3 Note this functionality is only available in certain countries TV settings ty y Features eeptime This allows you to access common interface applications Installation dlo defined by the service provider of the Common Interface ange code CI module 0 The Common Interface Cl module can contain one or rm more applications which are used to communicate with the CI service provider and provide some additional facilities to the user Info See Use the Common Interface slot p 52 Note this menu item and the common interface applications are only selectable when an authenticated Common Interface card is present and some Common Interface card user interface sessions are listed The CI service provider is responsible for the messages and texts on screen In case of failure or strange behaviour you must call your Cl service provider TV m
9. HDMI 1 2 With a HDMI connector ee o HDMI is the leading new standard for Digital video and audio interconnection Laus JA nntar 2 J aumomta 1 Connect your equipment with the HDMI connector 2 Select the equipment you have connected in HDMI the Installation menu Select your connections p 32 and link it to HDMI 1 or 2 ERA Note in case of any problems see Annex 4 Issues referring to connected peripherals with a HDMI connector p 62 Connect a DVD player or HD receiver Tip if necessary you can adjust the picture position to the centre of the screen with the cursor keys With a DVI connector Note only a DVD player with with digital sound can be connected to the HDMI connector Wow 1 Connect the DVI to HDMI cable to one of the eee HDMI connectors of your TV 1 ee 9 2 Connect the audio cable 2 to the DIGITAL Loi J auoiowu Lecven J AUDIO IN connector of the TV 3 Select the equipment you have connected in HDMI y the Installation menu Select your connections DIGITAL p 32 and link it HDMI 1 or 2 iN gt 4 Also select DIGITAL AUDIO IN in the same Connections menu 48 Connect a DVD player a satellite receiver or HD receiver EN Tip if necessary you can adjust the picture position to the centre of the screen with the cursor keys With Component Video Connectors osea svucunonzeo DIGITAL AUDIO me
10. Multimedia Browser application BROWSE MENU To open and close the main menu See How to navigate through the menus p 11 E Teletext On Off Press to switch teletext on See Teletext p 40 Only for UK Digital text Interactive services Attention not all channels transmit interactive television applications at all times 1 Volume Press or to adjust the volume Mute key interrupt the sound or restore it Use of the remote control RC4401 01 Continued P Channel selection to browse through the TV channels and sources stored and marked in the Favourite channels lists to select a page in Teletext mode to quickly browse through the lists in the menus to switch the TV on from standby mode 0 9 Digit keys To select a TV channel between 0 and 999 AV Select your peripherals See Installation menu Select your connections p 32 P P Previous channel Press to alternate between the currently viewed and the previously viewed TV channel Ambilight MODE Ambilight Press to switch Ambilight On or Off For the Ambilight settings see Use of the TV menu settings Enjoy Ambilight p 20 MODE Press this key repeatedly to toggle through the Ambilight modes Note when the TV is switched to standby and you switch Ambilight On Ambilight will be active Only then less modes are available lt lt gt Audio and Video equipment keys See Audio and Video equipment keys p 54
11. auto format 17 automatic installation 28 avl audio volume leveller 19 batteries brightness GAMETA isses camcorder care of the screen 2 change code channel list child lock Clock ete COOU M E colour enhancement colo r keys ir common interface slot 26 comp video connectors 47 49 43 contrast 5 15 country selection 28 cursor keys eere 5 custom colour 22 custom 16 decoder ener delta digital audio language T digital natural motion digital subtitle language digital teletext digital test reception digital TV DNR ecu eim dual I II DVB T titm DVD player 48 DVD 47 DVI connector 48 50 dynamic contrast 16 ED eosdem 35 19 euroconnector 46 47 51 factory 33 favourite 34 favourite channel list 34 features adjustment menu 23 64 fine thereto eor 29 first ti
12. connector at the bottom of the TV Fix the connector firmly with the screws on the plug In case of a Multimedia computer connect the audio cable 2 to the AUDIO outputs of your computer and to the AUDIO IN L R input of the TV Select VGA in the Installation menu Select your connections p 32 and link it to VGA Also select AUDIO IN LIR in the same Connections menu PC equipped with a DVI connector With Digital audio Use a DVI to HDMI cable to connect to one of the HDMI connector of your TV 1 Connect the audio cable 2 to the DIGITAL AUDIO IN connector of the TV Select the computer you have connected in the Installation menu Select your connections p 32 and link it to HDMI 1 or 2 Also select DIGITAL AUDIO IN in the same Connections menu With Analogue audio Use a DVI to HDMI cable to connect to the HDMI 2 connector of your TV 1 Connect the audio cable 3 to the AUDIO IN L R input of the TV Select the computer you have connected in the Installation menu Select your connections p 32 and link it to HDMI 2 Also select AUDIO IN L R in the same Connections menu Connect a Home Cinema amplifier AUDIO OUT DIGITAL Digital Home Cinema amplifier AUDIO a Ano Connect a digital Home Cinema amplifier to 8 Dum the DIGITAL AUDIO OUT connector 1 at DIGITAL AUDIO 000 the bottom of the TV ETE DISPLAY SYNCHRONIZED Tip to avoid visible delay between picture and sound u
13. difference in picture quality Dynamic contrast Automatically makes the contrast in the darker and the brighter picture areas more noticeable as the image on the screen changes o Normally select Medium It may be preferred to select Minimum Maximum or Off DNR DNR automatically filters out and reduces the image noise This improves picture quality when receiving weak signals o Select Off Minimum Medium or Maximum according to the image noise in the picture 16 Adjust picture menu settings Continued TV menu MPEG artefact reduction TV settings Picture MPEG artefact reduction On smoothens the transitions on digital content Select On or Off Settings assistant Reset to standard Picture MYST SEE Colour enhancement Sound Colour enhancem Automatically controls green enhancement and blue Ambilight Active control stretch It makes the colours more vivid Light sensor Select Off Minimum Medium or Maximum Picture format Active control The TV continuously measures and corrects all incoming signals in order to provide the best picture possible Select On or Off to activate de activate Active control Light sensor Light sensor On automatically adjusts the picture and ambilight settings for best viewing dependent on the lighting conditions in the room Select On or Off Picture format This allows you to adjust the size of the picture dependant on the broadcasted format and your pr
14. list with only digital TV channels or a list with only the radio channels or a list with only the analogue channels Note when this key is pressed the first time after you have finished the installation it will bring up the full channel list In other situations it will bring up the last selected channel list To select a channel from the displayed favourite list 1 Press the FAV key or the OK key gt last selected channel list appears 2 Use the cursor up down to select a channel 3 Press the OK key to display the selected channel To select another favourite channel list 1 Press the FAV key gt The last selected channel list appears 2 Press the red colour key to bring up the list of possible favourite channel lists Use the cursor up down to select a list Press the OK key Press the FAV key again to exit ux dos To create a favourite list or to modify the list 1 Press the FAV key gt The last selected channel list appears 2 Press the red colour key gt list with all possible favourite channel lists appears 3 Use the cursor up down to select a Favourites 1 to 4 channel list 4 Press the OK key 5 Press the green colour key to enter the Edit mode gt selected Favourite list will bring up a full channel list 6 Use the cursor up down to select a channel 7 Press the OK key to check or uncheck the highlighted channel and to add it to or remove it from your selected favourite
15. not be added to any favourite list already installed channels will not be renumbered 28 How to search for and store TV channels Continued EN TV menu Digital test reception only with Digital TV broadcasting Installation Channels This allows you to see the quality and the strength of the signal reception for a digital frequency This enables you to Languages aS find the antenna position that gives the best reception Country Installation upda Time zone i o Select Digital test reception and press the cursor right Analogue manual gt You obtain an indication of the actual channel frequency BOETIUS the network name the signal quality and strength Preferences Rearrange i gt If the signal quality and strength is poor you can try Connections repositioning the aerial Decoder Tip it is however advisable to contact a specialised aerial fs installer in order to achieve the best results You can also directly enter the frequency of the digital channels you want to test Analogue manual installation This gives you the possibility to manually install tuning in channel by channel analogue channels Manual installation Channels Analogue manual will not find nor store any DVB T digital channels Automatic install Installation update Digital test recept E0 i Analogue manual 7 eer TV menu Installation 1 Select Analogue manual installation and p
16. of the individual slide 61 Annex 3 Philips TV Digital camera and USB issues Notes the latest version of this document can be found on the Philips support website www philips com support the software of your TV is upgradeable If you have problems first check if you have the latest software installed on your TV The latest software together with instructions can be found on the Philips support website Use the type number of your TV to find this documentation and other related files Philips can t be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Digital Camera Issues If a USB connection between your digital camera and the TV isn t working you can try the solutions below to resolve your problem Make sure your digital camera is switched on and verify if the configuration of your digital camera is correct see the manual of your digital camera for more information Some digital cameras allow you to switch off the USB interface Make sure that the USB interface is switched on before connecting to the TV If you have a digital camera with only internal memory no removable memory you can try to copy the content manually to a USB memory device using a personal computer Some digital cameras allow you to switc
17. or the Previous day or back to Today 5 Press the MENU BROWSE key while Programme Guide is active to activate the Programme Guide main menu Use the cursor up down to highlight and select a menu item What s on allows you to browse through the programme guide information of your preferred EPG channels Search by genre allows you to search for the programmes according to a selected genre Scheduled reminders allows you to view and change the reminders you have set GO DvD STB DEMO OPTION Note the reminder s will wake up your TV from standby only if you switched off your TV with the 1 key on your remote control Preferred EPG channels are the channels from which the EPG data is currently being acquired This menu allows you to mark unmark up to 50 preferred EPG channels Note after the installation of your channels by default 40 channels with available EPG data will automatically be marked as preferred EPG channel Programme Guide What s on Search by genre _ Scheduled reminders lt i Preferred EPG chann PA REUTERS T alo Acquire EPG data Acquire EPG data allows you to update the information for the preferred programme guide channels Follow the instructions on screen Note Acquisition of EPG data is done automatically while watching TV 6 To quit the Electronic Programme Guide press the T key again Info Tips the EP
18. pictures in the teletext pages Select Teletext 2 5 On to take advantage of this feature o Select Teletext 2 5 Off if you like the more neutral teletext layout The selection made is valid for all the channels which broadcast Teletext 2 5 Note it may take a few seconds before teletext broadcast switches over to Teletext 2 5 Select the On Screen Display OSD This allows you to select the display of the volume bar and a reduced or extended on screen display of programme and channel information Select Minimum to activate the display of reduced channel information o Select Normal to activate the display of extended channel and programme information For example information on the programme input signal quality of connected peripheral equipment the screen format and sound mode selected audio language subtitle language ratings remaining time of the sleeptimer setting Display a Programme title This allows you to display the programme title according to the transmitted information gt When selected Yes after the selection of a TV programme or after you press the key on the remote control a programme title will be displayed if transmitted 31 Select your connections TV menu This allows you to select the peripheral equipment you have connected to the audio and video connectors Installation Connections 1 Select Connections Time zone 2 Press the cursor right Channels 3 Selec
19. sure that air can circulate freely through the ventilation slots Do not install the TV in a confined space such as a book case or a similar unit To prevent any unsafe situations no naked flame sources such as lighted candles should be placed in the vicinity Avoid heat direct sunlight and exposure to rain or water The equipment shall not be exposed to dripping or splashing Care of the screen Do not touch push or rub or strike the screen with anything hard as this may scratch mar or damage the screen permanently And please do not rub with dust clothes with chemical treatment Do not touch the surface with bare hands or greasy cloth some cosmetics are detrimental to the screen Unplug the TV before cleaning the screen When the surface becomes dusty please wipe gently with absorbent cotton or other soft materials like chamois soaks Do not use acetone toluene and alcohol because they cause chemical damage Do not use liquid cleaners or aerosol cleaners Wipe off saliva or water drops as soon as possible Their long time contact with the screen causes deformations and colour fading Stationary images on the TV screen A characteristic of LCD and Plasma Panels is that displaying the same image for a long time can cause a permanent after image to remain on the screen Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen Ex
20. with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Pixel characteristics Your TV display is made with high precision technology with a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Getting started ng Before you start Warning do not insert the mains cord into the mains at the bottom of the TV and in a wall socket or hang the TV on the wall before all connections are made Before you switch on your TV connect all your peripheral equipment See To make video and audio connections p 43 Overview of the rear connector panel There is a wide range of audio and video equipment that can be connected to your TV See To make audio and video connections p 43 AUDIO OUT
21. you to select the country where you are now Features located Installation e zone Notes Preference if you select a wrong country the channel numbering will not onnectio be according to the standard for your country in case the country selected is not DVB T supported by your TY digital related menu items will not be accessible Info Select the time zone only with Digital TV broadcasting Only applicable for certain countries and dependent on the selected country This allows you to select your local time zone so that the clock display shows the correct time Store TV and radio channels After language and country are set correctly you can now T search for and store the TV channels Select Channels in the TY Installation menu Installation Channels Ene Autom installation Automatic installation Country Installation update The TY will scan the entire frequency spectrum based on ers Digital tesis deii the selected country i E gt All available digital and analogue TV and digital radio Analogue manual channels are searched for and stored automatically Preferences Rearrange This will take a few minutes Connections gt When the search is complete the menu will indicate the number of digital and analogue channels found Installation update Info This allows you to automatically tune to and update all available channels Notes this will not reinstall uninstalled channels new channels found will
22. A Rearrange 4 5 Select another channel number and repeat steps 2 to 5 Uninstall reinstall This allows you to uninstall a stored channel so that it is no Rename 9 Uninstall Move Move longer possible to tune to This also allows you to reinstall up dawn an earlier uninstalled channel Select the channel you want to uninstall 2 Press the green colour key to uninstall the selected channel gt The uninstalled channel is indicated in the list by an icon in front of the uninstalled channel 3 Press the green colour key again to reinstall the uninstalled channel Note uninstalled channels are not reinstalled during an installation update 30 Set your preferences EN TV menu Installation Preferences Time zone Channels Preferences Connections Decoder Factory settings Software upgrade Info Location Teletext 2 5 Programme title This menu contains items that can set or adjust various special TV functions and that will typically be accessed only occasionally Select your location This allows you to select the location of your TV If you choose for Shop it will result in fixed settings of picture sound and ambilight The location Home will give full flexibility to change any predefined settings for picture sound and ambilight Select Teletext 2 5 Some broadcasters offer the opportunity to see more colours other background colours and nicer
23. About this User Manual EN This manual contains all information you will need to initially install and operate your new TV Also read the help texts which are being displayed at the bottom of the screen Q guarantee booklet If this instruction manual does not give an answer or if Troubleshooting does not solve your TV problem you can call your Local Philips Customer or Service Centre See the supplied Worldwide Please have the Model and Product number which you can find at the back or the bottom of your television set or on the packaging ready before calling the Philips customer support service Model 42PF9641D 10 Product No meenen Safety warnings 2 Getting started 3 Use of the remote control RC4401 01 5 Use of the option key 7 Keys at the right side of the TV 7 Introduction Digital TV 8 Switch the TV on sisse m nn 8 First time installation 9 How to navigate through the menus 11 Use of the TV menu settings 13 Adjust picture menu settings 15 Adjust sound menu settings 18 Enjoy Ambilight 20 Adjust feature menu settings 23 Search for and store TV channels 27 Rearrange the channel number list 30 Set your preferences 31 Select your connections 32 Select a decoder channel number 32
24. ERT DIGITAL AUDIO a Do AUDIO mr 4 46 COMMON INTERFACE COMMON INTERFACE HDMI AUDIO VGA ANTENNA EXT2 1 RTE CE eooooooooo Vae ci m EXT1 can handle CVBS RGB and Audio L R EXT2 can handle CVBS S VIDEO RGB Audio L R EXT3 can handle YPbPr and Audio L R HDMI 1 and 2 VGA can handle VGA SVGA and 480p 576p 10801 Audio L R Supported video formats 480i 480p 576i 576p 720p 10801 Warning disconnect all power sources before making any connections Tip it is preferable to connect peripherals with RGB output to EXT1 or EXT2 as RGB provides a better picture quality Getting started Continued Overview of the side connector panel To connect a camera camcorder or game see To make video and audio connections p 44 To connect a headphone see To make video and audio connections p 44 To connect a USB device see Multimedia browser p 37 Connect the antenna Insert the aerial plug firmly into the aerial socket T7 at the bottom of the TV Tip for best quality use the suppressor cable supplied Connect the mains Insert the mains cord supplied into the mains at the bottom of the TV and in the wall socket Warning verify that the mains supply voltage corresponds to the volt
25. G screen will not include TV channels which are not in the Preferred channel list or which are uninstalled See Rearrange menu new added channels via reinstallation or installation will have to be marked in the preferred EPG channel list before you can see EPG data 36 Multimedia Browser EN DVD STB DEMO BROWSE MENU BROWSE Cow The Multimedia browser lets you display pictures movies or play audio files stored on a USB device The Multimedia browser application is invoked from the main menu Following file formats can be reproduced for pictures JPEG for audio MP3 MP3 Pro LPCM for video MPEG1 MPEG2 Only FAT DOS formatted memory devices are supported Philips can not be held responsible if your USB device is not supported To view content from a USB device Tip if your USB device does not fit into the USB connector at the side use an USB extend cable to connect the USB device to the USB port Ask your dealer for more information To insert a USB device Note USB devices are not supplied with this TV In case of a USB memory stick or a digital camera connect it to the USB connector at the side See To make video and audio connections Side panel overview p 44 When a USB device is inserted the Multimedia browser menu is displayed automatically See further To remove the USB device 1 Press the MENU BROWSE key on the remote control to switch off the main m
26. In case of failure or strange behaviour you must call your Cl service broadcaster Insert a CA module Insert the specified Conditional Access module into the Common Interface slot as far as it will go It may take a few minutes before the CA module is activated and service information is downloaded Warning when you connect the CA module incorrectly it may damage the card and the TV After inserting a card leave it in the slot permanently Do not remove it from the slot unless asked to do so For example your card has to be in the slot when your CI service broadcaster wants to download new information to the smart card Once the CA module is removed your TV will no longer decrypt scrambled digital DVB T channels To access common interface applications see TV menu Adjust feature menu settings Common Interface p 26 52 Select connected equipment EN Before operating your connected equipment you have to make a selection in the Installation Select your connections menu E p 32 1 Press the MENU BROWSE key 2 Select TV menu and press the cursor right 3 Select Installation 4 Press the cursor right 5 Select Connections 6 Press the cursor right 7 Select the input to which the peripheral equipment is connected 8 Press the cursor right again to enter the list of types of peripherals connected to the selected input 9 Select the peripheral equipment with the cursor up down Recor
27. Press the cursor left to keep music playing and switch back to the Multimedia menu pic002 jpg 9 Press one of the colour keys on the remote control to m perform the corresponding function mentioned at the bottom of the screen pic004 jpg Tip the blue colour key can if necessary be used to let USBDevice 1 Picture London2005 the colour keys reappear London2005 pic001 jpg 10 To stop playing content press the Bil key on the remote m your TV supports slide shows with background music pic001 jpg See Annex 2 Philips TV slideshow format with background music p 59 the playback will continue to play even if temporarily Press OK to play switched to browser screens The audio will be stopped when another song starts playing or when the end has been reached more technical remarks can be found in Annex 3 Philips TV Digital camera and USB issues p 61 SEN gp Following icons may appear folder self made playlist album pictures video Ej 38 Multimedia Browser Continued EN Function keys at the bottom of the screen Details to display a description of the selected file or directory Transitions to select if you like to apply a transition during a slide show Slide time to select the duration a picture will be displayed in a slide show Rotate to rotate a picture Repeat one all to repeat the playback of a music file Shuffle to shuffle
28. Reset the factory settings 33 How to upgrade the TV software 33 Create your favourite list 34 EPG Electronic Programme Guide 35 Multimedia Browser 37 Teletext e hh re Aaa 40 To make video and audio connections 43 Side panel overview 44 Rear panel overview 45 Connect aVCR or DVD recorder 46 two VCRs or VCR and DVD recorder 47 a satellite receiver eee 47 a DVD player HD receiver game console 48 a DVD player or HD receiver 48 a DVD player satellite or HD receiver 49 cunc CD PT TTC 50 a Home Cinema amplifier 51 Use the Common Interface slot 52 Select connected equipment 53 Record with your recorder 53 Audio and video equipment keys 54 Troubleshooting 55 Annex 1 Philips TV software upgrade with portable memory 57 Annex 2 Philips TV Slideshow Format with background music 60 Annex 3 Philips TV Digital camera and USB issues lese 62 Annex 4 Issues referring to connected peripherals with a HDMI connector 63 LI n ete E 64 Recycling ee e rr RE RR hes 65 Product information 65 General Do not insert the power plug in a wall socket or hang the TV to the wall before all connections are made Place or hang the TV wherever you want but make
29. See Multimedia browser functional keys p 39 ll CANCEL Only for UK Digital text Interactive services Press this key to cancel those special services and the function bar at the bottom of the screen no function On screen information Press to display when available information about the selected TV channel and programme CB Dual screen Press the GB key to show teletext on the right of the screen FAV To display the channels list You can create up to four favourite lists DVD STB VCR AUX DEMO OPTION OPTION Quick access Digita Digital sub Suites _ Picture oma JE Equalizer Clock 092 Use of the OPTION key The OPTION key allows you to display the Quick access menu which will give you direct access to some features and menu options 1 Press the OPTION key gt The Quick access menu appears 2 Press the cursor up down to select a menu item 3 Press the OK key to jump to the selected menu item in the TV menu Except for the Clock option 4 Use the cursor keys to make a selection 5 Press the OPTION key to exit Note digital related menu items will only be accessible in case of digital TV broadcasting Digital audio language See Adjust sound menu settings p 18 Digital subtitle language See Adjust feature menu settings p 23 Subtitles See Adjust feature menu settings p 23 Picture format See Use of the TV menu settings Adjust picture men
30. TV software Installation Software upgrade Before starting the software upgrade procedure it is advised to check what your current TV software is Time zone 1 Select Software upgrade in the Installation menu 2 Press the cursor right Preferences The Software upgrade menu moves to the left panel 3 Select Current software info to observe the version and the description of the current software Connections Decoder Factory settings Software upgrade infa Preparing a USB portable memory for software upgrade What do you need personal computer with web browsing capability An archive utility that supports the ZIP format e g WinZip for Windows A preferably empty USB portable memory Note Only FAT DOS formatted portable memory is supported New software can be downloaded from the www philips com support website 1 Insert a USB portable memory device into a PC linked to the internet 2 Go to www philips com support 3 Choose your country or area language 4 Enter your model number 5 n the Search results click on the model number 6 Under Product support click on Software and drivers 7 Click on the Firmware Upgrade zip file 8 Click on the Download arrow in the upper left corner of your screen 9 Save the latest software upgrade file to your computer 10 Double click on the zip file and copy the file autorun upg to the root dir
31. a broadband internet and a settop box Switch the TV on o Press the power switch 1 at the side of the TV gt indicator on the front of the TV lights up and the screen comes on o If the TV is in standby mode press the P keys or the I key on the remote control Note the first time and only the first time you switch on your TV you see a Welcome screen followed by the installation procedure See First time installation p 9 First time installation The installation procedure consists of a series of screens that will guide you through the installation of your TV Follow the instructions on screen Note if the TV has already been installed before and or you want to change the First time installation settings proceed with Use of the TV menu settings p 13 First time installation Continued EN Step 1 select your on screen language After the Welcome screen you are asked to select a language of the TV s on screen menus The text of the header and the info on screen continuously change language Also the digital audio and subtitle language will be set to the selected menu language E 1 Press the cursor up down to highlight your language 2 Press the OK key on the remote control 3 Follow the instructions on screen to proceed DVD VCR AUX DEMO Step 2 complete the initial TV installation procedure 1 Press the green colour key on your remote control when Television is highlighted 2 Selec
32. age printed on the sticker at the rear of the TV UK EIRE Remote control Insert the 2 batteries supplied Type R6 1 5V Be sure the and ends of the batteries line up correctly inside of case is marked For most keys pressing a key once will activate the function Pressing a second time will de activate it Use of the remote control RC4401 01 EN 1 Standby Press to switch the TV from or to standby mode When switched to standby a red indicator on the TV lights up Attention the TV is never powered off completely unless it is physically unplugged TV Press to select TV mode DVD STB VCR AUX Press one of these keys to set your remote control to aol ae T a operate a peripheral device AR See Audio and Video equipment keys p 54 DEMO Press to switch the Demo menu on or off OPTION Colour keys When functions are attached to the colour keys the colour keys are shown on screen To select a page in Teletext mode OPTION To open and close the Quick access menu which contains a few frequently used options like Picture format When in teletext press repeatedly to enlarge the teletext page display See Teletext p 41 QA To open and close the Electronic Programme Guide See EPG Electronic Programme Guide p 35 Cursor keys Press the cursor keys up down left right to navigate through the menus OK To activate a setting Starts playing content in the
33. amples of stationary images this is not an all inclusive list you may encounter others in your viewing TV and DVD menus listings of DVD disk content Black bars when black bars appear at the left and right side of the screen it is recommended to change to a picture format so that the picture fills the entire screen EN Safety warnings TV channel logo present a problem if they are bright and stationary Moving or low contrast graphics are less likely to cause uneven aging of the screen Stock market stickers presented at the bottom of the TV screen Shopping channel logos and pricing displays bright and shown constantly or repeatedly in the same location on the TV screen Examples of still pictures also include logos computer images time display teletext and images displayed in 4 3 mode static images or characters etc Tip reduce contrast and brightness when viewing Carefully pay attention to these remarks The warranty does not apply to damage caused by not taking into account the above mentioned warnings on stationary images Electric Magnetic and Electromagnetic Fields Philips Royal Electronics manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply
34. d equipment in the Installation menu Select your connections and if you linked it to HDMI 1 or 2 according to where you made the connection Also verify if you selected digital audio in in the same Connections menu No digital channels Contact your dealer about Digital Video Broadcasting Terrestrial signal availability in your country No subtitles UK ONLY Under certain circumstances Digital text or interactive services may have priority over subtitles This can result in the subtitles not automatically reappearing when leaving Digital text or interactive services on a channel which is broadcasting subtitles In these cases subtitles can be initialised either by toggling the OPTION or the MENU key on the remote control or by changing channel 55 Troubleshooting Continued Symptom Possible cause Remedy The remote does not function o Verify if the remote is set correctly for the equipment your are using o Verify if the batteries are not dead Replace the batteries You can still use the keys at the right side of the TV o Select TV mode on your remote control o When pressing a key and some key leds are blinking with a higher speed and lower intensity than in a normal working condition and your TV does not react on the key press remove the batteries out of the remote control and put them back again The remote of connected equip ment does not function well o The infrared sig
35. d with your recorder Note to record digital programmes to an analogue recorder the TV needs to be switched on and tuned to that digital programmes Record a TV programme You can record a TV programme using your recorders tuner without affecting your TV 1 Select the channel number on your recorder 2 Set your recorder to record See the handbook for your recorder Note when recording analogue progammes switching channel numbers on your TV does not disturb recording 53 Audio and video equipment keys Most of the audio and video equipment from our range of products can be operated with the remote control of your TV Press one of the keys after you pressed one of the mode keys DVD STB VCR AUX according to the equipment you want to operate with this remote control See Use of the Remote control p 5 6 5 to switch to standby o for record _ 4 for rewind VCR CD search down DVD i for stop gt for play for pause gt gt for fast forward VCR CD search up DVD to display information MENU BROWSE to switch the menu on or off P for chapter channel track selection 0to9 digit entry cursor up down to select the next or the previous disc CD cursor left right to select the previous or following track CD P P to select a DVD title chapter index AUX to select your choice of subtitle language DVD Normal mode if no action is being undertaken within 30 seconds the remote cont
36. disable all locks you have set Important you have forgotten your code Select Change code and press the cursor right Enter the overriding code 8 8 8 8 Enter a new personal 4 digit code Confirm your new entered code The previous code is erased and the new code is stored 24 Adjust feature menu settings Continued EN Set code Change code TV menu Features This allows you to set or change the personal 4 digit access TV settings code that is used in the different lock functions of the TV Features eeptime Installation dlo Select Set or Change code code gt If no PIN code exists yet the menu item is set to Set 0 R code Follow the instructions on screen gt PIN code has previously been entered the menu n2 item is set to Change code Follow the instructions on screen Info o Enter your code with the digit keys All number combinations from 0000 to 9999 are valid numbers gt Features menu reappears with a message confirming that your PIN code has been created or changed On timer From standby this automatically switches the TV to the specified channel number at a specified time Select On timer Press the cursor right to enter the On timer menu Select Timer and press the cursor right Select On Select Channel and then the TV channel you want your TV to switch to on a selected time and day Select Day and then a day of the week or select
37. e Create your favourite channel list p 34 Programme guide allows you to access detailed information about individual digital TV programmes According to the type of Electronic Programme Guide it also allows you to access the table of scheduled Digital TV programmes and easily select and tune to a desired programme See EPG Electronic Programme Guide p 35 c 2 Multimedia allows you to access the Multimedia Television browser application It lets you display your personal TV channels multimedia files Multimedia is only present when a Programme guide USB device is connected Multimedia See Multimedia browser p 37 2 Use the cursor up down to highlight and select a menu item 3 Use the cursor right to enter the highlighted menu item gt right panel shows the content of the highlighted TV menu TV settings menu item TV settings etting t Features Reset to standard Installation P v 0 Info 11 BJ How to navigate through the menus continued 4 Use the cursor up down to select a menu item TV settings TV settings all to adjust ferred pict gs allows you to adjust your preferred picture TV settings ettings a ant sound and ambilight settings Features Reset to standard Features allows you to control the settings of special TV Installation Picture features Installation allows you to select your language preferences to search for and st
38. e antenna direction if the problem isn t solved by finetuning See Installation Analogue manual installation p 29 Poor colour o Select Factory settings in the Installation menu o Verify the connections between the optional equipment and the TV No sound o Verify if the volume isn t at minimum Verify if the sound hasn t been muted with the key Verify the connections between the optional equipment and the TV Sound and picture interruptions using HDMI to HDMI connection o If it occurs occasionally perhaps there is something wrong with the broadcasted programme o If it occurs persistently see the manual of your connected equipment to verify the necessary adjustments Alternatively connect an extra audio cable either an analogue or a digital audio cable from your connected peripheral to your TV Verify whether you selected the connected equipment in the Installation menu Select your connections and also select the respective audio input in the same Connections menu Note An analogue audio cable must be linked to HDMI 2 Limit the HDMI cable length to max 5 m o Verify if the connected equipment is properly selected in the Installation menu Connections according to the connection you have made HDMI 1 or 2 No sound when using DVI to HDMI connection o Verify whether you properly connected the audio cable to the DIGITAL AUDIO IN connector of the TV o Verify whether you selected the connecte
39. e gt Title of the slideshow lt title gt lt audio gt audio_url lt audio gt lt slide duration gt 30 lt slide duration gt lt slides gt lt slide gt slide_1_url lt slide gt slide slide 2 url slide slide slide 3 url slide slide slide 4 url lt slide gt slide slide 5 url slide slide slide 6 url slide slide slide N 1 url slide slide slide url slide slides 60 lt philips slideshow gt Annex 2 Continued ng Supported XML tags The following table gives a description of the XML syntax Tag Name Use Description philips slideshow mandatory Philips slideshow signature including the version title optional The title of the playlist audio optional The audio URL following this tag will define the music playing in the background during the slideshow A single song or playlist m3u amp pls are the only valid audio references Other reference will not result in any audio playback If a single song is referenced the song will be repeated forever a playlist is referenced the playlist will be played in sequence with a repeat at the end of the playlist slide duration optional The default display time in 0 1 second of a slide The TV application isn t obliged to support this tag The TV application can force the use of one or multiple predefined display times slides mandatory Identifies the slides to show slide optional Identifies the URL
40. ectory on the USB portable memory Note Only use software upgrades that can be found on the www philips com support website 57 BJ Annex1 Continued Upgrade the TV software 1 Switch off your TV and remove all memory devices Software Upgrade Application 2 Insert the USB portable memory that contains the downloaded software upgrade Upgrade busy 3 Switch on your TV with the power key 1 at the side of the TV 4 The upgrade process starts automatically After a few seconds the status of the upgrade procedure is displayed Software Id TL32E 234 Loading Validating 1l Warning You are not allowed to remove the USB portable memory during the software upgrade procedure In case of a power drop during the upgrade procedure don t remove the USB portable memory from the TV The TV will continue the upgrade as soon as the power comes back If an error occurs during the upgrade you should retry the procedure or contact your Local Customer Service Centre Programming mem 5 When the message Operation successful appears remove the USB portable memory and restart your TV with the power switch 1 at the side of the TV Your TV will start up with the new software Note once the upgrade is finished use your PC to remove the TV software from your USB portable memory If you need further assistance or in case of problems please call your local Philips Customer Centre See Philips
41. ects available is displayed o Select with the cursor up down left right the desired subject and press the OK key Note not all TV channels broadcast T O P teletext Select subpages When a selected teletext page consists of different subpages a list of available subpages appears on the screen Press the cursor left or right to select the next or previous subpage Picture Teletext 1 Press the key 2 Press the key to show Teletext on the right of the screen 3 Press the GB key to return to a full teletext picture 4 Press the amp key to return to a full screen picture 40 Teletext Continued Hypertext With hypertext you can quickly jump to a pagenumber or search for a specific word shown on the current teletext page 1 Press the OK key to highlight the first word or a number on the page 2 Use the cursor up down left right to select any other word or number you want to search for 3 Press the OK key to confirm The search starts gt message appears at the bottom of the screen to indicate the searching or that the word or page is not found 4 Use the cursor up until the top of the page to exit i db KCN hypertext Press the OPTION key on the remote control repeatedly OPTION to display the upper teletext part the lower teletext part and then to return to the normal teletext page size Teletext menu DVD STB VCR AUX DEMO Enlarge a Teletext page
42. eferred setting Tip this function is also accessible via the OPTION key on the remote control How to navigate through the TV settings menu see p 12 Use of the TV menu settings Choose among the following picture formats Auto format Super zoom 4 3 Movie Expand 14 9 Movie Expand 16 9 or Wide screen Auto format makes the picture fill the screen as much as possible In case of subtitles in the bottom black bar Auto format makes the subtitles visible In case of a broadcaster logo in the corner of the top black bar the logo disappears from the screen Super zoom removes the black bars on the sides of 4 3 programmes with minimal distortion When in Movie Expand 14 9 Movie Expand 16 9 or Super zoom screen format you can make subtitles visible with the cursor up down Note with HD sources not all picture formats will be available 17 TV menu TV settings Sound Settings assistant 2 711 Reset to standard Picture Balance Dual 1 11 Mono Stereo Ambilight LEER ES 0 DIGITAL Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories 18 EN Adjust sound menu settings The sound menu contains the settings that affect the quality of the sound Press the MENU BROWSE key on the remote control gt main menu appears 2 Select TV menu and press the cursor right
43. elevision Settings assistant Previous Next Skip Stop PHILIPS Settings assistant Please select your location b continuing Home Shop 10 First time installation Continued Step 3 Settings assistant select your TV settings By means of several split screens full screens you are prompted to select your preferred picture sound and ambilight settings to finally arrive at a complete setting which satisfies you Press the green colour key on your remote control to enter the Settings assistant menu Select your Location with the cursor up down gt If you choose Shop it will skip the Settings assistant The TV parameters for Picture Sound and Ambilight will then be set to predefined fixed settings Press the green colour key again to proceed gt If you choose Home it will display the Settings assistant Use the cursor left right to each time select your preferred screen Press the green colour key to each time confirm your selection and to jump to the following screen gt The following items will be presented sequentially In the header it is mentioned how many screens have been completed and how many screens there are in total The Settings assistant will step sequentially through the following settings Picture Sound and Ambilight Press the green colour key again to store all the settings and to return to the TV installation menu Note when
44. ellite receiver 49 search for channels usd select your connections 32 select connected equipment 53 set code 25 settings assistant 10 side connectors 44 sharpness we 15 sleeptimer w 24 slideshow format 60 software upgrade 33 57 sound adjustment menu 18 standby key sss 5 store channels i28 subtitles 23 surround mode we 19 switch the TV 8 teletest u esee teletext menu teletext 2 5 31 time zone 28 ilit 15 teletext pages 40 troubleshooting 092 tv menu settings 13 uninstall tres usb connector usb volume Recycling ng Recycling amp The packaging of this product is intended to be recycled Apply to the local authorities for correct disposal Disposal of your old product Your product is designed and manufactured with highly quality material and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic pr
45. enu 2 Remove the USB device 37 Multimedia Browser Continued Multimedia Browser menu 1 Insert a USB device TV channels 2 Select the USB device under Multimedia with the cursor Programme guide up down Multimedia gt The Multimedia browser allows you to browse content stored on the inserted USB device gt 2 panel browser will be shown with the left panel containing the content types Music Pictures Movies gt right panel will display the content that is available USBDevice 1 Picture of the selected content type Music 3 Press the cursor right to enter the content 4 Press the cursor up down to select a content Movies 5 Press the cursor right to enter the content 6 Press the cursor up down to select a file or a directory Note press the green colour key to display all the image USBDevice 1 files in the current directory as thumbnails when browsing Picture London 2005 pictures Press the green key again to display the image London2005 files list The Beatles 7 In case a file is selected press the OK key to display a Xmas2004 alb picture file or to play a video or an audio file arnold jpg In case a directory album or playlist is selected press the cursor right to enter the content or press the OK key USBDevice 1 Picture London2005 to start a slide show or a loop playback of the files present London2005 pic001 jpg 8
46. enu Features Demo Demo Subtitle Pixel Plus e This allows you to get an idea of the features that are part Dig subtitle langu of the television Sleeptimer Settings assistant Childlock Active control Select Demo Set Change code Press the cursor right Select a desired demo Press the OK key to start the demo The selected demo is played once Press the red colour key to stop the demo and to return to the demo menu 6 Press the red colour key to exit the demo menu Common interface wv 26 How to search for and store TV channels EN Tip you will need this chapter only if you want to change the installation settings TV channels Programme guide Multimedia TV menu Installation TV settings Features Installation Time zone Channels Preferences Connections Info TV menu Installation Languages Country Preferred audio Time zone Preferred subtitle Channels Hearing impaired Preferences Connections Decoder Info Installation menu This menu will adjust settings related to the installation of the TV channels language and country and to the initial installation of your TV 1 Press the MENU BROWSE key on the remote control gt main menu appears 2 Select TV menu and press the cursor right gt TV Menu is moved to the left 3 Select Installation and press the cursor right gt The Installation
47. ettings assistant Reset to standard 09 Picture Surround mode Headphone volume Ambilight Delta volume Auto surround Dual I II Allows you to select per channel Dual I or Il when dual sound transmission is available Mono Stereo Allows you to select per TV channel Mono or Stereo sound when stereo broadcasts are available Surround mode Allows you to select the modes for more spatial or surround sound reproduction dependent on the broadcasted signals or signals from external inputs received Headphone volume Allows you to control the level of sound through the headphones AVL Automatic Volume Leveler Automatically reduces the volume differences between channels and programmes providing a more constant overall level This will also reduce the dynamics of sound Delta volume Allows you to correct for any permanent volume differences between TV channels or external sources Auto surround When switched On this allows the TV to automatically switch to the best surround sound mode the broadcaster transmits 19 Enjoy Ambilight TV menu The ambilight menu contains the settings for controlling the settings Ambilight ambient lighting pal ee light gives fue relaxed viewing experience and improves perceived picture quality Settings assistant Analysis of the picture content adapts the colours continuously Reset to standard 217 But the lights can also be set to any f
48. h between PTP Picture Transfer Protocol or PC Link and USB Mass Storage Make sure that you select USB Mass Storage or PC Drive on your digital camera If your camera supports different interface settings be sure to try them one by one or contact the reseller of your camera to find out the correct setting USB Memory Device Issues Devices connected to the USB port of your TV must be Mass Storage Class compliant If your device digital camera player portable harddisk is not Mass Storage Class compliant it will not be detected by the content browser of the TV The following subsets of the Mass Storage Class specification are supported The implementation of the TV is based on the Universal Serial Bus Mass Storage Class Specification Overview v1 2 June 23 2003 including all documents referenced by the document The document can be found on the USB standardisation website www usb org Full support of the USB Mass Storage Class Bulk Only Transport blnterfaceProtocol 50h Full support of SubClass Code 05h SFF 8070i spec Full support of SubClass Code 06h SCSI transparent command set For large USB memory devices when you are in the Content Browser it may take a long time before you can access your files When using a USB portable harddisk Due to the high power consumption of the harddisk it is advised to use the external power supply of the portable harddisk to guarantee prope
49. imum 5 m Incase no signal is detected from your HDMI equipment switch off the HDMI equipment and then on again Sound interruptions using HDMI to HDMI connection In case of persistent sound interruptions connect an extra audio cable from your connected peripheral to your TV Extra analogue audio cable HDMI 2 SS 90 oom iz J pe va J 1 Connect your peripheral equipment with the HDMI 2 connector 4 2 Connect the analogue audio output of your peripheral equipment to the AUDIO L R input of your TV 2 3 Select the equipment you have connected in the Installation menu Select your connections p 32 and link it to HDMI 2 4 Also select AUDIO IN LIR in the same Connections menu Extra digital audio cable eue Bo nots J J o 1 Connect your peripheral equipment with the HDMI 1 or 2 connector 1 2 Connect the digital audio output of your peripheral equipment to the DIGITAL AUDIO IN input of your TV 2 3 Select the equipment you have connected in the Installation menu Select your connections 32 and link it to HDMI 1 or 2 4 Also select DIGITAL AUDIO IN in the same Connections menu DIGITAL AUDIO IN 63 active 17 ambilight tne 20 analogue manual installation 29 Antenna 4 audio receiver 51 audio equipment keys 54
50. ixed colour and many Picture shades of white Sound Colour Ambilight Custom colour Tip in standby mode the lights can be set operated to any colour and create a unique ambiance in the room See Ambilight in standby mode p 22 Separation 1 Press the MENU BROWSE key on the remote control gt main menu appears 2 Select TV menu and press the cursor right gt TV Menu is moved to the left 3 Select TV settings and press the cursor right gt TV settings menu is moved to the left panel 4 Select Ambilight and press the cursor right gt The Ambilight menu is moved to the left panel 5 Use the cursor up down to select the Ambilight menu items 6 Press the cursor right to enter the selected Ambilight menu item 7 Use the cursor keys to adjust the settings 8 Press the cursor left to return to the Ambilight menu Ambilight Allows you to switch the lights On or Off at the rear of the TV Select Off to switch off the ambient lights and downlight all other ambilight menu items o Select On to switch on the ambient lights Refine the light settings in the menus below Brightness Allows you to adjust the light output of the ambilights 20 Enjoy Ambilight Continued EN Mode TV meni Allows you to choose for constant background lighting or for background lighting that matches the images displayed on the screen TV settings Ambilight Settings assistant Ep
51. light gt Ifyou select Natural it allows you to set your picture sound and ambilight settings to the recommended standard values In most cases this will give the best balanced viewing experience gt If you select Vivid it allows you to set your picture sound and ambilight settings to rich values making use of the TV capabilities to its full extend gt f you select Subtle it allows you to set your picture sound and ambilight settings to the purest representation of the original source content 2 Press the green colour key to store the selected setting C Individual settings for picture sound and ambilight Select Picture Sound or Ambilight and press the cursor right gt appears which allows you to fine tune the picture sound and ambilight settings gt To adjust the Picture settings see Adjust picture menu settings p 15 gt adjust the Sound settings see Adjust sound menu settings p 18 gt adjust the Ambilight settings see Enjoy Ambilight p 20 14 Adjust picture menu settings EN TV menu TV settings TV settings Features Installation Info TV menu TV settings Settings assistant Reset to standard Picture Sound Ambilight Picture Contrast Brightness Colour Sharpness The picture menu contains the settings that affect the quality of the picture 1 Press the MENU BROWSE key on
52. list 8a o Press the green colour key again to leave the Edit mode gt The modified favourite channel list appears Press the FAV key again to exit gt With the P key you will be able to browse through the TV channels of the selected list 8b Press the red colour key to remove the channel list Note with the digit keys you can still select channels which are not marked as favourite Create your favourite channels list Continued EN To select only TV or only radio channels on the All channels list When the All channels list is displayed or selected you may filter the list and select a list with only the TV channels or a list with only the radio channels 1 Press the FAV key gt last selected channel list appears Press the cursor left Select the All channels list and press the cursor right Press the red colour key to filter Select your desired channels list Press the FAV key again to exit gt With the key you will be able to browse through the TV channels of the filtered list anu Note the filtering will not be remembered after the TV is switched off or set to standby EPG Electronic Programme Guide only with Digital TV channels The Electronic Programme Guide shows you detailed information about the current programme and also about the next programme only for TV programmes that provide EPG information Note these instructions may differ according to the ty
53. me installation 9 PAME e 44 48 HDMI connector headphone headphone volume hearing impaired home cinema amplifier 51 an hypertext installation menu 27 language preferences 27 Light SENSO eerte 17 LOCA ON iriiri 31 manual installation 29 meri Key toners 11 MPEG reduction 17 multimedia browser ROY cascos navigate through the menus 11 on screen language 9 on screen information 6 senes 25 option key 7 OK K6y tesis citeriore 5 PC 50 picture adjustment menu 15 picture format 17 PIN code pixel plus preferences menu 31 preferred audio language 27 preferred subtitle language 27 previous 6 programme title 31 quick access menu 7 radio channels 5 28 rear panel overview 45 rearrange channel list 30 record a TV programme 53 recycling reinstall remote control enne 5 reset factory settings 2033 ROMAIN 30 reshuffle rns 30 safety 2 sat
54. menu is moved to the left panel 4 Use the cursor up down to select the Installation menu items 5 Press the cursor right to enter the selected Installation menu item 6 Use the cursor keys to make a selection 7 Press the OK key to activate or to confirm 8 Press the cursor left to return to the Installation menu or press the MENU BROWSE key to switch off the menu Select your language preferences This menu allows you to select your preferred language for menu audio and subtitle Menu language This allows you to select your menu language out of the list of the available languages Preferred audio language only with Digital TV broadcasting This allows you to select your audio language preference in case several languages are broadcasted Preferred subtitle language only with Digital TV broadcasting This allows you to select your subtitle language preference in case several languages are broadcasted Hearing impaired only with Digital TV broadcasting This allows you to select the hearing impaired audio or subtitle language When set to On the Hearing impaired version of your preferred audio or subtitle language will if available be reproduced When set to Off the normal audio and subtitle language behaviour will be applicable 27 EN How to search for and store TV channels Continued TV menu Installation Select your country TV settings anguage i This allows
55. music collections in a random way Zoom to select one of the zoom magnifications x1 x2 x4 with the cursor up down Additionally you can shift the selected zoom window over the screen with the cursor keys Full small screen to toggle between a full a small screen Note to rotate a picture or to select one of the zoom magnifications first stop the slide show with the OK key or the blue colour key Multimedia function keys on the remote control 44 fast rewind displaying content to stop playing content gt to play a single file start a slide show playback of a folder or other collection to pause playing content fast forward displaying content 39 Teletext Note Teletext is not available via equipment connected to the HDMI connector Most TV channels broadcast information via teletext This TV has a 1200 pages memory that will store most broadcasted pages and subpages to reduce waiting time After each programme change the memory is refreshed o Press amp to switch the teletext on gt main index page appears the screen Select a Teletext page o Enter the desired page number with the digit keys or with the key o Select the options at the bottom of the screen with the colour keys Previous selected teletext page Press the key Select T O P teletext broadcasts o Press i9 gt A T O P overview of the teletext subj
56. n menu appears on the screen 2 Select TV menu and press the cursor right gt TV menu is displayed 3 Select TV settings and press the cursor right gt TV settings menu is moved to the left 4 Press the MENU BROWSE key to exit the menu To make it easier to change the settings of the TV there are 3 ways of doing it A Change settings in an easy to use manner with the Settings assistant Each time you ve made a selection press the green key to confirm your selection 1 Select Settings assistant and press the cursor right gt means of several split screens full screens you are prompted to select your preferred picture sound and ambilight settings to finally arrive at a complete setting which satisfies you See First time installation Step 3 Settings assistant select your TV settings p 10 2 Press the green colour key to return to the TV menu again 13 BJ Use of the TV menu settings continued B Use of the Standard settings if present This allows you to reset your settings for viewing and TV menu listening to predefined factory settings TV settings Reset to standard ROTER moo 1 Select Reset to standard and press the cursor right assistant RENS Natural gt A menu appears which allows you to select one of the eset to standar standard settings for viewing and listening Picture gt Current shows your current settings for viewing and Sound listening Ambi
57. nals of the screen may influence the reception sensibility of other peripherals Solution replace the batteries of the remote of other peripheral equipment No photo or music play or in poor quality o Verify if the source complies with a supported code No stable or not synchronised VGA picture o Verify if you have selected the correct VGA mode in your PC See Connect a PC p 50 o Verify the connections between the TV and the PC No solution found for your picture or sound problem o Switch off your TV off and then on again once Never attempt to repair a defective TV yourself Verify with your dealer or call a TV technician Red blinking led o Unplug the mains cord for 10 seconds and insert it in again Black bars with HD channels o Select another picture format No EPG data available The Electronic Programme Guide function and background programme information are only made available by TV channels that provide EPG information and in countries which support EPG See www philips com support 56 Annex 1 Philips TV software upgrade with portable memory EN Introduction Philips continuously tries to improve its products and it wants you to profit of that even after your purchase Therefore it allows you to upgrade your TV software using a USB memory device not supplied You can execute the software upgrade procedure yourself TV menu Verifying the version of the
58. normal living room lighting Cool white is matched to that of normal daylight 6500K Select this setting if you prefer more cool lighting Note the 6500K is the SMPTE recommended setting for ambient backlighting of displays Blue preferred by most consumers to create a cool modern and or mystical atmosphere Select this setting according to your personal taste or mood Red preferred by most consumers to create a cosy special atmosphere Select according to your personal taste or mood Custom select if you want to customise the ambilight colour 21 Enjoy Ambilight Continued Custom colour TV menu TV settings Ambilight Note only available when Custom has been selected in the Colour menu Settings assistant Reset to standard E Allows you to customise the ambilight colour Picture o Select Palette to select the general colour of the light Sound Custom colour output Ambilight Separation o Select Saturation to adjust the colourfulness of the light Balance Separation Allows you to define the stereo effect in case Relaxed Moderate or Dynamic has been selected in the Mode menu Select Off for a mono behaviour which means that all lamps will behave equally Select Minimum Medium or Maximum to define the Ambilight stereo effect spread over the available lamps Balance Allows you to adjust the colour and level of light intensity on the left and right side of the picture
59. ns and R L connection details T to get an optimal viewing it is advised to switch your equipment to the highest possible 5 supported display modes a ITENNA 7 75 9 Warning in case you notice scrolling images hmm wrong colours or no colour no picture or even sires combinations of these on your screen verify if the connections are done in the correct way and SAT STB if the resolution and the signal standard of the connected equipment are set in the right way See the handbook for your equipment 49 T OO Notes only a PC with digital sound can be connected to the HDMI connection if your PC does not have digital sound output connect your PC via a VGA connector before connecting your PC to the TV select your PC monitor settings to a refresh frequency of 60 Hz supported PC monitor modes VGA 640 x 480 SVGA 800 x 600 XGA 1024 x 768 AUDIO R DIGITAL AUDIO OUT DIGITAL AUDIO AUDIO e 9 9 64637 AUDIO in R L VGA m o Go a n AUDIO A pc vea Di n L AUDIO Bs rarer HDMI AUDIO in L R J inis 72 HDMI DIGITAL AUDIO IN E DVI IES C 50 PC equipped with a VGA connector 1 Connect one end of a VGA cable 1 to the video card of the computer and the other end to the VGA
60. o stop a slide show press the Bi key General Rules The slideshow will use plain ASCII XML syntax to allow the creation and editing of the slideshow files using simple tools All references to network content must be based on the global address of the content Content on a Portable Memory PM doesn t have a global address as a result content from a PM can never be referenced from a slideshow not stored on the PM itself To maintain portability a slideshow stored on a PM should ONLY reference content on the same PM Referencing global addresses can result in inconsistencies if the PM is used on a non networked CE device The latter is however not forbidden it is only a recommendation It is preferable that URL s referencing PM content are based on a relative path starting from the directory where the slideshow is stored This path includes the device or drive name of the PM An absolute path to content will also be supported relative path pictures West1 jpg tamper jpg new bird jpg absolute path USB1 pictures1 foo_bar jpg C f1 jpg organization jpg General Format The format and syntax below will be used to create the slideshow file simple ascii text with the extension alb ALB Examples slshow1 alb summer holiday 2004 ALB test alb The following syntax should be used to create the text file lt xml version 1 0 encoding ISO 885h9 1 lt philips slideshow version 1 0 gt lt titl
61. oducts Please act according to your local rules and do not dispose of your old products with your normal household waste The correct disposal of your old product will help prevent potential negative consequences for the environment and human health The batteries supplied do not contain the heavy metals mercury and cadmium Please check on how to dispose of exhausted batteries according to local regulations Product information Your TV consumes energy in standby mode Energy consumption contributes to air and water pollution Very low standby power consumption Specifications see the product leaflet on www philips com support If you need further assistance please call the customer support service in your country The corresponding telephone numbers and addresses are given in the supplied Worldwide guarantee booklet Belgi Belgique Ireland Portugal 070 222 303 0 17 min 01 601 1777 Local 2 1359 1442 Local Danmark Italia Schweiz Suisse Svizzera 3525 8759 Local 199 404 041 0 25 min 0844 800 544 Local Deutschland Luxembourg Svenska 0180 5 356 767 4 0 12 min 40 6661 5644 Local 08 5792 9100 Local France Nederland 08 9165 0005 0 23 min 0900 8407 Norge 0 0800 3122 1280 Awpedav 2270 8111 Espafia Osterreich 902 888 784 0 15 min 0820 901114 0 20 min Suomi 0 20 min 09 2311 3415 Local United Kingdom Local 0906 1010016 0 15 65
62. ontinued TV menu Custom tint only when Tint is set to Custom TV settings Picture Fine tunes the white point WP and black level BL of the picture Settings assistant EC P Reset to standard Picture Sound Ambilight Select Custom tint and press the cursor right Use the cursor keys to select and adjust the settings of R WP allows you to customise the colour tint by adjusting the red whitepoint of the picture G WP allows you to customise the colour tint by adjusting the green whitepoint of the picture B WP allows you to customise the colour tint by Info adjusting the blue whitepoint of the picture R BL allows you to customise the colour tint by adjusting the red blacklevel of the picture G BL allows you to customise the colour tint by adjusting the green blacklevel of the picture 3 Use the colour keys to reset to the predefined settings 4 Press the cursor left to return to the Picture menu N Pixel Plus Pixel Plus is the most ideal setting as it fully processes the image to make every single pixel the best it can be improving contrast sharpness picture depth and colour reproduction and brilliance from every source including High Definition Select On or Off to activate de activate Pixel Plus Digital Natural Motion Reduces the field and line flicker and reproduces smooth movement especially in movies o Select Off Minimum or Maximum in order to really see the
63. or lower than the current version a confirmation will be asked Downgrading to older software should only be done in case of real necessity 8 When the software upgrade was successful remove the USB portable memory and restart your TV with the power switch 1 at the side of the TV Your TV will start up with the new software Note Only use software upgrades that can be found on the www philips com support website 59 Annex 2 Philips TV Slideshow Format with background music Notes the latest version of this document can be found on the Philips support website www philips com support Use the type number of your TV to find this documentation and other related files Philips can t be held responsible for any problems that may occur as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Introduction This document explains how to make a Philips slideshow file with background audio Be aware that the content of this document is addressing technical or software skilled users To start the slideshow open the slideshow file in the Multimedia browser of your TV 1 Press the MENU BROWSE key on the remote control after having inserted a USB device and switched on the TV 2 Go to where you stored the slideshow file alb on your portable memory 3 Select the slideshow file and press the OK key to start the slide show 4 T
64. ore your TV channels to set or adjust various special functions to select connected peripheral equipment to define one or more channel numbers as decoder channel numbers to reset your picture sound and ambilight settings to the factory standard settings to upgrade your TV software 5 Press the cursor right to enter the highlighted menu item gt The content of the right panel is moved to the left panel and the right panel now shows the content of the newly highlighted item in the left panel Info Note in some cases it is important that the picture can be watched while you adjust the settings This means that when the highlight is on the right side panel the other menu items hide away When the cursor left is pressed the hidden menu items reappear and the highlight moves to the left panel 6 Press the MENU BROWSE key to exit the main menu 12 Use of the TV menu settings EN Television TV menu TV channels Programme guide Multimedia TV menu TV settings TV settings Features Installation Info The TV menu allows you to access and change settings and preferences in case you want to change the First time installation settings and or you want to control the settings of special TV functions features and peripheral equipment Adjust viewing and listening settings 1 Press the MENU BROWSE key on the remote control gt The mai
65. pe of Electronic Programme Guide 1 Press the T key se vor x gt The EPG screen appears Dependent on conditions it may take some time to acquire EPG data gt EPG screen updates automatically if the EPG data is acquired successfully If not the EPG screen remains blank gt Information about the selected programme appears Use the coloured keys to activate the available EPG features displayed at the bottom of the screen 2 To quit the Programme Guide page press the QA key again When the type of Electronic Programme Guide available displays a list of TV programmes 1 Use the cursor up down to select a desired TV programme gt Information about the selected programme appears Tips press the blue colour key on the remote control to view more information not currently displayed about the selected programme to quit the display of detailed information press the blue colour key again 35 EPG Electronic Programme Guide Continued 2 Press the green colour key on the remote control to watch listen to the selected programme currently on air 3 Press the red colour key to mark unmark a reminder on the selected programme You can set up to a maximum of 10 reminders gt The TV will wake up automatically or display a message when the programme is about to start Follow the instructions on screen to watch the programme 4 Press the yellow colour key to jump to the Next
66. r directly to EXT1 or EXT2 with a eurocable 46 Connect two VCRs or VCR and DVD recorder EN Note you can not record signals from equipment connected to the YPbPr input r With eurocables T 1 Connect the aerial cables 1 and as in shown Kewanee Cae m Connect your VCRs or DVD recorder to and 2 with the eurocables 4 EXT 1 2 Select the equipment you have connected in nu the Installation menu Select your connections la p 32 and link it to EXT1 or 2 ar With aerial cables only xL aes 1 Connect the aerial cables and as shown 2 Tune in your recorder s testsignal and store the testsignal under programme number 0 See Analogue manual installation p 29 See also the handbook of your recorder Connect a satellite receiver With a eurocable 1 Connect the aerial cables 1 and as shown 2 Connect your satellite receiver to EXT1 or 2 Qo with a eurocable 3 CABLE 3 Select the equipment you have connected in Lumina r o the Installation menu Select your connections p 32 and link it to EXT1 or 2 EXT 1 2 With Component Video connectors mu See Connect a DVD player a satellite receiver or a HD receiver p 49 47 Connect a DVD player HD receiver or game console Tip if necessary you can adjust the picture position to the centre of the screen with the cursor keys
67. r working under all conditions Digital Content Issues Only FAT DOS formatted initialized portable memory is supported Errors in this formatting can result in unreadable content If such problems appear try to re format the card Be aware that formatting the card will also delete all the content on it pictures music The maximum size of any multimedia file should never exceed 4Gbyte Do not use a in folder naming If video streams are supporting multiple audio tracks the first audio track will automatically be selected the other audio tracks can t be selected External subtitle files e g DivX srt subtitle files are not supported 62 Annex 4 Issues referring to connected peripherals with a HDMI connector The HDMI IN connector allows the following TV and monitor display modes HD Standard Definition TV SDTV Enhanced Definition TV EDTV High Definition TV HDTV PC VGA 640x480 SVGA 800 600 XGA 1024x768 640x480i 720x480i 720x576i 640x480p 720x480p 720x576p 1920x1080i 1280x720p f necessary you can adjust the picture position to the centre of the screen with the cursor keys Due to legal requirements it is possible that with certain copy protected PCM audio qualities from a peripheral equipment connected to the HDMI input the Digital audio output signal is muted Proper working is only guaranteed with HDMI compliant consumer products Limit the cable length to max
68. ress the cursor right 2 Select System 3 Select your country or part of the world where you are Rearrange Store as new chan now located 4 Select Search and press the cursor right 5 Select the red or green colour key to proceed Tip if you know the frequency enter the 3 digits of the frequency with the digit keys 0 to 9 For example 049 Info 6 Press the cursor left to store the channel found or to search for another channel 7 Select Fine tune and press the cursor right Fine tuning can be useful when the frequency has shifted a bit or when interference of another frequency occurs Adjust the frequency with the cursor up down in case of poor reception of the channel found 8 Select Store current channel if you want to store the fine tuned frequency under the current channel number Press the cursor right and confirm with the OK key Select Store as new channel if you want to store the fine tuned frequency under a new channel number Press the cursor right and confirm with the OK key 9 Use the rearrange menu to rename or reshuffle the channels See next page Note when on a frequency where a DVB signal is broadcasted the tuner will try to decode an analogue TV channel and hence will not show video 29 Rearrange the channel number list This allows you to rename to reshuffle and to uninstall or TV menu Installation Chanai reinstall the stored channels o Press the co
69. rol returns to TV mode Expert mode in Expert mode the remote will stay in the selected mode even when the 30 seconds time out is elapsed To select between Normal and Expert mode 1 Select TV mode with the TV key 2 Press the OK key simultaneously with the K key for four seconds gt When the 1 key is On for one second the Expert mode is selected and the remote control will remain in the mode selected 3 Select the desired mode DVD STB VCR AUX 4 To go back to the TV mode select TV and repeat steps 1 to 3 54 Troubleshooting Symptom Possible cause Remedy No picture Verify if the supplied cables are connected properly The aerial cable to the TV the other aerial to your recorder the power cables Verify if you selected the correct source Verify if the child lock has been switched off Poor picture o Verify in the Manual installation menu if you have selected the correct TV system Verify if your TV or house aerial isn t located too close to loudspeakers non earthed audio equipment or neon lights etc Mountains or high buildings can cause double pictures or ghost images Sometimes you can improve the picture quality by changing the direction of the aerial s the picture or teletext unrecognisable or do you experience bad teletext reception Verify if you have entered the correct frequency or fine tune the frequency for that specific channel or adjust th
70. rresponding colour keys and follow the on Languages Autom installation screen instructions Country Installation update Time zone Digital test recept Reshuffle Analogue manual This allows you to change the order of the stored TV Preferences Rearrange channels Connections 1 Select the channel you want to change place 2 Press the yellow colour key to move up a single position in Bosnier the list 3 Press the blue colour key to move down a single position in the list Info 4 Repeat to reshuffle other TV channels TV menu Installation Channels Rearrange Rename Automatic instal Installation update Digital test rec Analogue manual Rearrange This allows you to change the name stored in the memory or to assign a name to a channel or external for which a name has not yet been entered 1 Select the channel you want to rename 2 Press the red colour key on your remote control 3 Select the characters with the cursor up down Select the following position with the cursor right 4 Press the green colour key or the OK key when finished Notes press the yellow colour key to delete all characters The cursor is positioned at the beginning again press the blue colour key to delete the character the cursor is positioned Enter a new character with the cursor up down 0 a name can be given to the channel numbers 0 to 999 space numbers and other special characters are located between Z and
71. rsor right ange code 3 Select a value with the cursor up down 0 gt The list will have values from 0 to 180 minutes When 0 is selected the sleeptimer is switched off Demo Note you can always switch off your TV earlier or select another time set Info Childlock With a 4 digit code you are able to lock TV channels and external sources to prevent children from watching certain programmes Select Childlock Press the cursor right to enter the Childlock menu Enter your 4 digit code Note you have to re enter your code each time you enter the Childlock menu 4 Select one of the menu items of the Childlock menu and press the cursor right Lock to lock all channels and externals Custom lock to lock a certain programme or to lock all the channels from a certain time Select Lock after to lock all programmes from a certain time onwards Press the cursor right twice o Select On to set the lock Press the cursor left Select Time and press the cursor right o Enter the time with the cursor up down and right Channel lock to lock a certain TV channel or external o Press the OK key to activate deactivate Parental rating to set an age rating to a digital programme if the programme is parental rated The ratings applied are according the selected country in the initial installation Press the cursor right and select an age rating with the cursor up down Select Unlock to
72. se this DIGITAL AUDIO OUT connector to connect your Home Cinema amplifier HDTV amp Pr i Jp DIGITAL AUDIO Analogue Home Cinema amplifier According to the type of connector cables and the connector input available on your Home Cinema amplifier connect your receiver to the AUDIO OUT L and R connectors 3 or to 1 or 2 2 at the bottom or the rear of Ea y the TV mi 51 Use the Common Interface slot Warning switch off your TV before any module is inserted in the Common Interface slot Note this functionality is only available in certain countries To receive scrambled DTV signals you will need a CA Conditional Access module and a Smart card um um provided by the service provider UL common nrerrace notin 2 module can enable additional services for example Pay TV Contact your Common Interface service provider to get more information about these modules Although CA module types may vary dependent on the manufacturer each of the CA modules common inrenrace supports a certain kind of encryption system Your TV supports CA modules to work with the DVB T standard Note that a smart card may only be valid for a single broadcast channel CA modules and smart cards are neither supplied nor optional accessories from Philips The CA module is responsible for the messages and texts on screen
73. settings 7 Press the cursor left to return to the Features menu Subtitle This displays Teletext and DVB T subtitles from the selected TV channel These can be permanently displayed or only when mute is active The teletext subtitle page of analogue channels must be stored for each TV channel 1 Switch on teletext and select the proper subtitle page from the index 2 Switch off teletext 3 Select Subtitle On to display the subtitles on the selected TV channels On during mute to automatically display the subtitles only when the sound has been muted with the iK key on the remote control Tip this function is also accessible via the OPTION key on the remote control Digital subtitle language only with Digital TV broadcasting This allows you to temporarily select your preferred subtitle language out of the list of the broadcasted languages for the current programme Note to permanently change the subtitle languages use the Language menu in the Installation menu o Use the cursor up down to temporarily overrule your permanent language selection and confirm with the OK key Tip this function is also accessible via the OPTION key on the remote control 23 Adjust feature menu settings Continued TV menu Features Sleeptimer This sets a time period after which the TV automatically TV settings Ss switches to standby Features eeptime 1 Select Sleeptimer Installation dlo 2 Press the cu
74. t if present Info When you switch on your TV a message may appear that a new software upgrade is available o Press the red colour key on your remote control if you want to be reminded later on Press the green colour key on your remote control to confirm you have read the message Once you have confirmed the message will not pop up again If however you want to see the last broadcasted announcement again select Announcement in the Software upgrade menu Note as long as the software upgrade has not been executed the message will be available 33 Create your favourite list 34 Ce TN channels EXTI EXT2 _ DME 1 Analogue channel 1 2 Digital channel 1 3 Digital channel 2 4 Radio channel 1 B 2 5 Data channel 1 Change list Tune to a channel by pressing OK Use P for page up down All channels TV channels Radio channels Analogue Favourites 1 Favourites 2 Favourites 3 Favourites 4 Use cursor up down to select and OK to confirm 2 Digital channel 1 HDMI ay 1 Analogue channel 1 3 Digital channel 2 GY 4 Radio channel 1 amp 5 Data channel 1 Exit Leave edit Press the OK key to mark unmark This allows you to select up to four favourite channels lists with your preferred TV channels and radio stations For example each member of your family can create his her own favourite list In addition to the favourite channel lists you may also select a
75. t the country where you are now located BROWSE MENU Notes if you select a wrong country the channel numbering will not be according to the standard for your country in case the country selected is not DVB T supported by Menu language your TV digital related menu items will not be accessible 0 English 3 Press the green colour key your remote control to start the Automatic channel installation gt All available digital TV and radio channels and analogue ano TV channels are searched for and stored automatically g are agya This will take a few minutes When the search is complete the menu will indicate the number of digital and analogue channels found e Next Notes reception of digital terrestrial TV channels is applicable PHILIPS Installation dependent on the country selected if you choose to install the channels at a later time select the Automatic installation in the TV menu Installation Channels to scan available channels This will help you to inst sections Television Settings assistant A Press the red colour key again when the search is Previous Next Skip Stop leted completed PHILIPS Television System searching plea Digital channels found Analogue channels found Stop 7 J e PHILIPS Installation This will help you to comple assistant T
76. t the input to which the peripheral equipment is Preferences connected enean a gt When you select EXT1 EXT2 EXT3 HDMI 1 HDMI 2 VGA Side AUDIO IN L R or DIGITAL AUDIO IN list appears which allows you to identify Factory reset which type of peripheral equipment is attached to this Software upgrade EUDEN input DA 4 Press the cursor right again to enter the list of types of peripherals connected to the selected input 5 Select the peripheral equipment with the cursor up down Digital Audio In If a peripheral equipment has a digital audio output you can connect this with a single cable to the TV s DIGITAL AUDIO IN connector In the Connections menu assign the DIGITAL AUDIO IN to the corresponding external input to which your peripheral equipment is connected In addition to accepting audio input via Digital Audio In the TV can output encoded Dolby Digital audio via the DIGITAL AUDIO OUT connector to an external amplifier or receiver If your amplifier or receiver has a matching connector for Digital Audio In you can connect it with a single cable to the TV s DIGITAL AUDIO OUT See To make video and audio connections Connect a Home Cinema amplifier p 51 Select Decoder channel number TV menu This allows you to define one or more channel numbers as decoder channel numbers when a decoder or a descrambler is connected to EXT1 or EXT2 Installation Decoder Channel Time zone Sta
77. the remote control gt The main menu appears 2 Select TV menu and press the cursor right gt The TV menu is moved to the left 3 Select TV settings and press the cursor right gt The TV settings menu is moved to the left panel 4 Select Picture and press the cursor right gt The Picture menu is moved to the left panel 5 Use the cursor up down to select the Picture menu items 6 Press the cursor right to enter the selected Picture menu item Note all digital related menu items will only be accessible in case of digital TV broadcasting 7 Use the cursor keys to adjust the settings 8 Press the cursor left to return to the Picture menu Contrast Adjusts the intensity of bright parts in the picture but keep the dark parts unchanged Brightness Adjusts the light output of the complete picture which will mainly affect the darker areas of the picture Colour Adjusts the saturation level of the colours to suit your personal preference Hue Compensates for the colour variations in NTSC encoded transmissions Sharpness Adjusts the sharpness of fine details in the picture Tint Increases or decreases Warm red and Cool blue colours to suit personal preferences Select Cool to give the white colours a blue Normal to give the white colours a neutral Warm to give the white colours a red tint Select Custom to make a customised setting in the Custom tint menu item 15 BJ Adjust picture menu settings C
78. to picture 5 Press BI CANCEL to cancel digital text or interactive services Text info Some digital channels also offer information on the programme being broadcast In that case a message may appear at the bottom of the screen for a few seconds Follow the instructions on screen and use the cursor keys to scroll through the next pages Note digital text will not be available when Subtitles are set to On in the Features menu 42 To make video and audio connections Tip use the inputs that are available on your equipment that provide the best video or audio performance as below Note your TV comes with all types of connectors with the exception of the DVI connector but some of your equipment may be equipped with this type In this case you ll need a DVI to HDMI adapter or a HDMI to DVI cable and separate audio cables all available at your local dealer Warning be sure to connect the DVI output connector first then connect to the HDMI input on your TV Best video performance Notes Connector table Audio connection required HDMI High Definition Multimedia Interface Component video aaoo 480p 576p 720p 480i 576i 1080i eo HDTV amp Pr is 480p 576p 720p 10804 DIGITAL Digital audio Component video 6 480p 576p 720p A 480i 576i 1080i Q Y Pr i Analog audio ro RF Coaxial cables are often colour coded to connec
79. tors Connect red to red white to white component video YPbPr connection is necessary to view video sources for example digital broadcastings coming from a HD receiver in 1080i 720p 576i 576p 480i or 480p PC equipped with aVGA connector see p 50 43 To make video and audio connections Side panel overview Camera Camcorder Game 1 Connect your camera camcorder or game as shown 2 Connect to VIDEO 2 and AUDIO L 3 for mono equipment For stereo equipment also connect AUDIO 3 S VHS quality with an S VHS camcorder is obtained by connecting the S VHS cables with the S VIDEO input 1 and AUDIO inputs Warning do not connect cable 1 and 2 at the same time This may cause picture distortion Headphone 1 Insert the plug into the headphone socket as shown 2 The headphone impedance must be between 8 and 4000 Ohm The headphone socket has 3 5 mm jack In the Sound menu select Headphone volume to adjust the headphone volume Tip Press amp the remote control to switch off the internal loudspeakers of the TV USB See Multimedia browser p 37 44 To make video and audio connections Rear panel overview 3 ele ae Anal Di Home ndi Home n N amplifier amplifier Satellite receiver HD receiver AUDIO IN DIGITAL a ai AUDIO L je PC VGA i I AUDIO NLR VGA 9 0 EE Gum RN 99 gt
80. tus 1 Select the channel number under which you have stored the Channels programme that comes from your decoder or descrambler Preferences 2 Select Status 3 Select the input used to connect your decoder None EXT1 or EXT2 ha Select None if you do not want the selected channel Factory settings number being activated as a decoder channel number Software upgrade Info 32 Reset the Factory settings EN TV menu This allows you to reset most of the predefined factory states Installation Factory settings 1 Select and press the cursor right 2 Press the OK key to erase settings and reset them to their Time zone default values Channels Preferences Connections Decoder Factory settings Software upgrade Info How to upgrade the TV software TV menu This allows you to upgrade your TV software using a USB device Installation Software upgrade USB device upgrade Current softw info It is possible to initiate an upgrade procedure from a USB Time zone Local upgrades device before you start up the TV The memory device must Channels Announcement be filled with the appropriate upgrade image and structure Preferences which can be found on the www philips com support website Gamma How to upload a new software version on your memory device see Annex 1 Philips TV software upgrade with portable Decoder z memory p 57 Factory settings Software upgrade Automatic software announcemen
81. u settings p 17 Equalizer See Use of the TV menu settings Adjust sound menu settings p 18 Clock o Select to activate deactivate the clock display on the screen Keys at the right side of the TV In case your remote is lost or broken apart from channel selection and volume adjustment you can still change some of the basic settings with the keys at the side of your TV o Press the power switch 1 to switch the TV on or off The MENU key can be used to summon the TV menu without the remote control Use the VOLUME and keys and the PROGRAM CHANNEL and keys to select menu items G voume C meu momo gt lt A Y Introduction Digital TV Besides traditional analogue broadcasts you can also receive digital broadcasts via a roof or loft mounted digital antenna in countries where those signals are available and which are supported by this TV Verify if the country you are now located and you have selected during the installations see further supports digital video broadcasting via antenna See www philips com support for the list of supported countries or consult your local dealer or see the sticker at the back of your TV Note for digital TV channels via a cable connection you will need an extra set top box decoder for digital TV channel via satellite a satellite tuner and dish mounted outdoors are required Also certain internet providers offer digital TV channels vi
82. you skip or stop the Settings Assistant then the standard settings Philips selected for you will be chosen Press the red colour key again to finish the First time installation procedure and to display the first stored TV channel Note any time you can change or reset your settings or adjust individual settings for Picture Sound and Ambilight in the TV settings menu See p 13 Use of the TV menu settings To control the settings of special TV functions features and accessory equipment see p 23 Adjust feature menu settings How to navigate through the menus EN Introduction A lot of guiding instructions help texts and messages will be displayed on your TV when you use the menus or when you try to execute an action Read the help texts which are being displayed on the specific item highlighted The colour keys at the bottom of the screen refer to the different actions which may be executed Press the corresponding colour key on the remote control to perform the required or desired action DvD STB DEMO OPTION Note digital related menu items will only be accessible in case of digital TV broadcasting 1 Press the MENU BROWSE key on the remote control gt The main menu appears on the screen TV menu allows you to access the TV menu See below TV channels allows you to access the TV channel list and to create up to four favourite lists with your preferred TV channels and digital radio stations Se

Download Pdf Manuals

Related Search

Related Contents

附属書Ⅲ：参考銘柄情報シート  PDF user manual for offline reading  PCMP32 - Velleman  ••PrOTeCTOr Cd 45  Guias(2013) - WordPress.com  CyberLink DVD Suite  NOV` LIQUIDE PLONGE MANUELLE - éd.01 22.10.2012  Panas。ni閤 取扱説明書  element14 BeagleBone Black  

Copyright © All rights reserved. Failed to retrieve file