Philips 32HFL5332/97 Flat Panel Television User Manual
Contents
1. Access the teletext options menu Access the teletext features through the teletext options menu Press TELETEXT L gt The teletext screen appears 2 Press OPTIONS L gt The teletext options menu appears 3 Press AV to select one of the following options e Freeze page Freezes the current page e Reveal Hides or reveals hidden information on a page such as solutions to riddles or puzzles e Cycle subpage Cycles through subpages automatically if subpages are available e Menu language Switches to a different language group to display a language correctly when it uses a different character set 4 Press AVP to make a selection then press OK to confirm 5 Press BACK to exit the teletext options menu Select teletext subpages A teletext page can hold several subpages Subpages are displayed on a bar next to the main page number Press TELETEXT L gt The teletext screen appears 2 Press CH to select a teletext page 3 Press lt b to enter a subpage EN 13 English Select T O P teletext broadcasts Table Of Pages T O P teletext broadcasts allow you to jump from one subject to another without using page numbers T O P teletext is not broadcast on all TV channels Press TELETEXT L gt The teletext screen appears 2 Press INFO L gt The T O P overview appears 3 Press AYP to select a subject 4 Press OK to view the page Create2. Layer 1 Layer 2 Layer 3 PBS Mode Off On Consumer Setup Yes PBS Settings Store Yes Reset Yes Maximum volume 0100 Switch on Setting Picture format Super zoom 4 3 Subtitle zoom Movie expand 14 9 Movie expand 16 9 Wide screen Unscaled Power on On Standby Last status Smart power Off Low Medium High Last Status Switch on Vol User Defined Last Status Switch on Ch User Defined Display message Off On Chinese Line 1 Edit Line 2 Edit Line 3 Edit Welcome Msg Line 4 Edit Line 5 Edit Clear Yes essage Time out 20 sec 25 sec 30 sec Local KB Lock Off On All RC Lock Off On OSD Display Off On igh Security Mode Off On DMI CEC in Off On USB break in Off On Control Settings E g Enable teletext Off On Only for selected models Blue Mute Off On Digit Timeout 0 5 10 seconds Selectable AV List of selectable external sources onitor Out Off On ESP 0 24 hours EN 25 English Layer 1 Layer 2 Layer 3 Speaker Settings TV Speaker Enable Off On Bathroom Speaker Volume 0 10 Installation Blank Channel Off On Multi RC Blue Off Green Yellow Red Off On PayTV Setup All available channels R2 Pay TV channel list Pay TV channel list Smart Clone 26 EN USB to TV Load TV to USB Load
3. Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears Press AV to select Installation gt Channel installation gt Analog manual install L gt The Analog manual install menu appears Press AV to select Skip channel then press B to enter Press AV to select Yes then press OK to skip current channel L gt The selected channel is skipped when you press CH on your remote control or view from the channel grid To skip more channels repeat the procedure Tip To access the skipped channels press Numeric buttons To restore a skipped channel repeat steps 1 to 4 and then select No in step 5 EN 21 English Rename channels You can rename channels The name appears when you select the channel 1 2 NOW e The device name can be up to six characters e Press Aa to change an uppercase letter to a When watching TV press OK to display he channel grid Press AVS to select the channel to rename Press OPTIONS L gt The channel options menu appears Press AV to select Rename channel hen press OK L gt A text input box appears Press AVP to select characters Press OK to confirm each character Select Done then press OK to finish renaming channels Tip long lowercase letter and vice versa 22 EN Rearrange channels After you install channels you can rearrange the o
4. on the remote control or from the channel grid you are prompted to enter your PIN code View photos and play music from a USB storage device Caution Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device Use the USB connector to view photos or listen to music stored on a USB storage device 1 Turn on the TV 2 Press SOURCE and select USB then press OK L gt The USB menu appears 3 Press OK to enter the USB content menu Ls The USB file browser appears View a slide show of your photos 1 In the USB file browser view press AV to select a picture then press OK L gt A slide show begins from the selected photo 2 Press the following buttons to control the slide show Button Function OPTIONS Selects Stop slideshow to pause the slideshow a v When the slideshow is stopped press to go back or move forward to the next image gt BACK Stops the slideshow EN 17 English Change slide show settings 1 When viewing a slide show press OPTIONS L gt The slide show options menu appears 2 Press AV to select one of the following e Start Slideshow Stop Slideshow Starts or pause a slide show e Slideshow transitions Sets the transition from one picture to the next e Slideshow frequency Sets the amount of time that a picture is shown e Rotat
5. PBS settings PBS Mode Enables disables the Professional mode e On All settings in the Professional mode Setup menu are in effect e Off The TV operates as a normal consumer TV Consumer Setup A shortcut to enter the full TV menu This allows the installers to do all the TV setup settings Store Selects Yes to save the changes in Professional mode Restarts the TV mains power for the changes to take effect Reset Selects Yes to reset all settings in Professional mode and consumer mode to factory default Switch on setting Maximum volume This option specifies the maximum allowable volume level of the TV Picture format Sets available picture format when the TV is switched on Power on The power on function allows the TV to enter a specific mode On Standby or Last status of operation after the mains power is activated On When set the TV will always turn on after the mains power is activated e Standby When set the TV will always turn to standby after the mains power is activated e Last status When set the TV will always turn to the last status either On or Standby whenever the mains power is activated Smart power Adjusts the picture backlight to achieve the following power saving mode Off Smart power is disabled e Low The picture backlight is at low power saving mode e Medium The picture backlight is at medium power saving mo
6. Select Picture and press OK WN Press AVP to select the following settings Smart picture Accesses pre defined smart picture settings e Video contrast Adjusts the intensity of video contents keeping backlight unchanged e Contrast Adjusts the intensity of backlight areas keeping video contents unchanged e Brightness Adjusts the intensity and details of dark areas e Color Adjusts color saturation e Hue Compensates for color variations e Sharpness Adjusts sharpness in the image e Noise reduction Filters and reduces noise in an image e Color Temperature Sets the color temperature to cool normal or warm e Digital Crystal Clear Fine tunes each pixel to match surrounding pixels This produces a brilliant high definition image e Dynamic contrast Enhances contrast A Medium setting is recommended e Dynamic backlight Adjusts brightness of the TV backlight to match lighting conditions e Color enhancement Makes colors more vivid and improves the details in bright colors You can switch this feature on or off e PC mode Adjusts the picture when a PC is connected to the TV via HDMI or DVI Picture format Changes the picture format Picture size Adjusts the viewing area When set to maximum you might see noise or a rough edge of an image Horizontal shift Adjusts the picture horizontally for PC VGA or HDMI input Vert
7. e Off Closes welcome message On Displays customized welcome message Sets customized messages from Line 1 to Line 5 below mentioned e Chinese Displays a Chinese Welcome Message e Line 1 Sets the characters of the first line message e Line 2 Sets the characters of the second line message e Line 3 Sets the characters of the third line message e Line 4 Sets the characters of the fourth line message e Line 5 Sets the characters of the fifth line message e Clear Clear the settings in Line 1 to Line 5 e Message Time out Sets the period of time to display the welcome message on the screen when TV is turned on from standby Off 28 EN Control settings Local KB lock e Off The TV local buttons will function normally e On The TV local buttons are locked except POWER button e All All TV local buttons are locked including POWER button RC lock Disables the operation of the Guest remote control e Off All buttons on Guest remote control will function normally On All buttons on the Guest remote control are disabled It is still possible to enter the Professional setup menu by pressing 3 1 9 7 5 3 a MUTE OSD display Sets this function to show or hide screen information Off Screen information is suppressed On Normal screen information is displayed High security Off Professional mode setu
8. Remote control sensor EN English Remote control aren MENU 6 EN e FORMAT INCR SURR TELETEXT SOURCE 6 U Se wey PHILIPS TELEVISION 4 Standby On e Switches the TV to standby if it is on e Switches on the TV if it is in standby MENU Toggles the main menu on or off 3 TELETEXT Toggles teletext on or off Note e Teletext is not applicable for China 93 models and only for selected models 4 SOURCE Selects connected devices G Color buttons e Selects tasks or options 6 SLEEP Switches the TV to standby after a pre defined period of time OPTIONS Accesses options relating to the current activity or selection OK Confirms an entry or selection and displays the channel grid when watching TV Av Navigation buttons avigates menus INFO Displays program information when available If the information spans multiple pages press OPTIONS to go to the next page AD ak Mute utes or restores volume 2 CH Channel Remote control usage Switches to the previous or next channel When the TV menu is on this functions When using the remote control hold it close as Page Up Down o the TV and point it at the remote control When PBS setup menu is on it switches sensor Make sure that the line of sight to the previous or next channel or between t
9. list Note e All favorite channels are marked by an asterisk in the channel grid Remove a channel from a favorite list 1 When watching TV press OK L gt The channel grid appears Press amp V lt 4P to select a channel to remove 2 3 Press OPTIONS 4 Select Unmark as favorite then press OK L gt The channel is removed from the favorite list Use the TV clock You can display a clock on the TV screen Set the TV clock 1 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press AYP to select Features gt Clock L gt The Clock menu appears 3 Press AVP to enter time 4 Select Done and press OK to confirm 5 Press MENU to exit Display the TV clock 1 When watching TV press OPTIONS L gt The TV option menu appears Select Clock 3 Press OK Use timers You can set timers to switch the TV to standby at a specified time Tip Set the TV clock before you use timers Automatically switch the TV to standby sleep timer Sleep timer switches the TV to standby after a pre defined period of time Tip You can switch off your TV earlier or reset the sleep timer during the countdown Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press AVP to select Features gt Sleep timer L gt The Sleep timer m
10. t J T eA SERVU C HDMI 1 Digital audio and video input from high definition digital devices such as Blu ray players Connections via DVI require an additional audio cable 32 EN GB SERIAL EXPRESS For Serial Express communication and use by service personnel SERIAL EXPRESS Te RX TX GND ITV_VDD 5V RC_IR_OUT TV ANTENNA Signal input from an antenna cable or satellite TV ANTENNA 750 ar AV IN Audio or composite video input from analog devices connected to VIDEO or VCRs 6 AV OUT Audio L R Analog audio output to home theaters or other audio systems VIDEO Analog video output to external devices such as another TV set D BATHROOM SPEAKER 8 Q Audio output to a bathroom speaker AW via a stereo jack Before you connect the bathroom speaker make sure to turn off the TV mains power BATHROOM SPEAKER 80 BATHROOM SPEAKER 80 Speaker Terminal 2 Speaker Terminal c NC CVI Y Pb Pr and AUDIO L R Analog audio and video input from analog or digital devices such as DVD players or game consoles English IR LINK Connector for an IR Link compliant device e g set up box It allows the IR command from a Remote Control to be passed on by the TV to the
11. S Safety 3 Selectable AV 29 Setting Picture 10 11 Sound 12 13 Shop mode 19 Skip channels 21 SmartClone 31 Smart power 27 Smart RC 30 44 EN Software Download 19 Update 19 Version 18 Specification 39 Switch channels 8 on off 8 Source 9 T Teletext 9 13 Timer On timer 16 Sleep timer 15 Troubleshooting 40 TV overview 5 U USB Disconnect 18 File formats 38 Music 18 slide show 17 SmartClone 31 USB break in 29 V Video formats 38 Volume Adjust 9 Mute 9 W Wall mount 3 39 Welcome message 28 EN 45 PHILIPS Z41G320181305A 2010 Koninklijke Philips Electronics N V All rights reserved Document order number Z41G320181305A_ a
12. and use list of favorite channels You can create a list of your preferred TV channels so that you can find those channels easily Note e The function is only available when PBS mode is off Select a favorite list 1 When watching TV press OK to display the channel grid 2 Press OPTIONS L gt The channel options menu appears 3 Press Av to select Select list then press OK to enter L gt The channel list options appear 4 Select Favorite then press OK L gt Only channels in the favorite list appear in the channel grid Note e The favorite channel grid is empty until you add channels into the favorite lists 14 EN View all channels You can exit a favourite list and view all installed channels 1 When watching TV press OK L gt The channel grid appears 2 Press OPTIONS L gt The channel options menu appears 3 Press Av to select Select list then press OK or gt to enter 4 Select All then press OK Ls All channels are displayed in the channel grid Note All favorite channels are marked by an asterisk when you view the channel grid Add a channel to a favorite list 1 When watching TV press OK L gt The channel grid appears 2 Press AV to select a channel to add to a favorite list 3 Press OPTIONS L gt The channel options menu appears 4 Select Mark as favorite then press OK L gt The channel is added to the favorite
13. in accident injury or damage of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to child Risk Risk ren ever place the TV ona surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over he edge of the surface ever place the TV on tall furniture such as a bookcase without anchoring both he furniture and TV to the wall ora suitable support Educate children about the dangers of climbing on furniture to reach the TV of overheating ever install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV of damage to the TV Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different EN 3 English Risk of injury fire or power cord damage ever place the TV or any objects on the power cord e To disconnect the TV power cord easily from the power outlet ensure that you have full access to the power cord at all imes e When you disconnect the power cord always pull the plug never the cable Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never ouch any par
14. refers to the period 10 years during which the toxic or hazardous substances or elements contained in electronic information products will not leak or mutate so that the use of these substances or elements will not result in any severe environmental pollution any bodily injury or damage to any assets ERR Battery labeling logo 5 SSS eeens Environmental Protection Use Period HOR VAS CAE BAREA WASA Bk REE HE TE RE BAB SAE EE ZE FAP A He ANS a E eA Ue ER This logo refers to the period 5 years during which the toxic or hazardous substances or elements contained in the battery will not leak or mutate so that the use of these substances or elements will not result in any severe environmental pollution any bodily injury or damage to any assets Contents 1 Notice 2 2 Important 3 3 Your TV 5 Side controls and indicators 5 Remote control 6 4 Use your TV 8 Switch your TV on off or to standby 8 Switch channels 8 Watch connected devices 9 Adjust TV volume 9 Use teletext 9 5 Use more of your TV 10 Access TV menus 10 Change picture and sound settings 10 Use advanced teletext features 13 Create and use list of favorite channels 14 Use the TV clock 5 Use timers 15 Use TV locks 16 View photos and play music from a USB storage device 17 Update the TV software 18 Change TV preferences 19 Reset the TV to factory settings 19 6 Install channels 20
15. to blue Digit Timeout Defines the time interval between numeric buttons when users press digits on the remote control The duration is from 0 5 to 10 seconds When digit is pressed the timer refreshes Selectable AV Allows the installer to define which external sources to be displayed on the source list when pressing SOURCE button on the Guest remote control Only the sources marked with X appear in the source list ESP Energy saving program Selects the period of time to switch the TV off automatically when TV does not receive any user input The time is between O to 24 hours Selects 0 to disable this feature Speaker Settings TV Speaker Enable e Off Disables the TV speaker The headphone volume functions normally On The TV speaker is enabled Default setting Note e When the headphone is plugged in the TV speaker is muted automatically Bathroom Speaker Volume e 0 10 When the PBS mode is on adjust the volume from 0 to 10 Note e When the PBS mode is off the volume is fixed EN 29 English Installation Blank Channel The Blank channel function disables the display of video on the TV but does not affect the audio output This function can be used for audio applications example music only channels and so on which do not necessarily require the display of video d _ Switch to the channel you want to set as blank channel 2 Se
16. 0 ANTENNA 32 B Batteries 4 38 Blank Channel 30 Blue mute 29 C Channels Channel grid 8 Favourite channels 14 Fine tune 21 nstall 20 Automatic 20 Manual 20 Lock or unlock 17 PayT V 30 Rearrange 22 Rename 22 Skip channels 21 Troubleshooting 40 Computer Connect 36 Display resolutions 38 Troubleshooting 41 Consumer Setup 27 D Default setting 19 Display resolutions 38 Dispose 4 E EasyLink Disable 37 Enable 37 one touch play 37 one touch standby 37 ESP 29 F Factory settings 19 Favourite channels 14 Fine tune 21 H HDMI 32 Troubleshooting 41 HDMI CEC in 29 High security 28 Home mode 19 Install channels Automatic 20 Manual 20 K Kensington lock 37 L Language menu language 13 20 Troubleshooting 40 List Favourite 14 PayTV 30 Location home or shop 19 Lock Kensington lock 37 Local KB lock 28 Lock channel 17 RC lock 28 TV lock 16 M Menu consumer menu 10 teletext 9 Multimedia 17 38 Multi RC 30 EN 43 English O one touch play 37 one touch standby 37 On timer 16 OSD display 28 P Picture Picture formats 12 picture settings 11 Troubleshooting 40 PIN code 16 Power consumption 38 Preferences 19 Product specification 39 Professional mode Options 25 PBS Mode 27 Store 27 R Rearrange channels 22 Reception 38 Remote control Consumer remote control 6 Multi RC 30 Product information 38 Professional Setup Remote control 23 Rename channels 22 Resolution 38
17. Automatically install channels 20 Manually install channels 20 Rename channels 22 Rearrange channels 22 7 Professional mode instruction 23 Introduction 23 Benefits of Professional mode 23 Professional Setup Remote control 2573 optional 23 Activating the Professional mode setup menu 24 Professional mode options 25 8 Connect devices 32 Back connectors 32 Side connectors 34 Connect a computer 36 Use Philips EasyLink 37 Use a Kensington lock 38 9 Product information 39 Supported display resolutions 39 Multimedia 39 Tuner Reception Transmission 39 Remote control 39 Power 39 Supported TV mounts 40 Product specification 40 10 Troubleshooting 41 General TV issues 41 TV channel issues 41 Picture issues 41 Sound issues 42 HDMI connection issues 42 Computer connection issues 42 Contact us 42 EN English 1 Notice 2010 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must
18. Register your product and get support at www philips com welcome 32 37 42 PHILIPS EN User Manual FL5332 97 FL5382 97 FL5382 97 PHILIPS LCD TV Environmental Information PmthasA SMRXTAN ARSE Names and Contents of Toxic or Hazardous Substances or Elements FEAED RRR Hazardous Toxic Substance BEAR Gij KR i Ar FRKE BRAM Name of the Parts Pb Hg Mercury Cd Cadmium Chromium 6 PBB PBDE Lead Housing 0 O o o O 0 PAWA LCD Panel X X oO 0 0 0 Wide BL PWBs X o oO 0 o o EIRENE Accessories X 0 Oo 0 0 0 Remote control amp cables MHE GRP AS E Batteries in Remote X 0 oO 0 0 0 Control HEE Hu O RANA EAE WTAE AME ITA BT EI LES I T 11363 2006 PRERE NI BEBE TF O Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ T11363 2006 X BNA RA ED gt ETE SO HP ES ABE HH S T 11363 2006 PRERE AY BR BE BER o X Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ T11363 2006 LD WO amar Environmental Protection Use Period JOR ASR CFE TE SERIE BE FORK LE 1E AEH RE PAN RE SNERRE HAEN ZETIA AT AA GT ERRA HAA WENE HE USABLE o This logo
19. S Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press AVP to select Installation gt Channel installation gt Analog manual install L gt The Analog manual install menu appears 3 Press Av to select Search then press gt to enter 4 Press Numeric buttons to manually enter the three digit frequency 5 Press OK to begin search L Ifa channel is unavailable at the selected frequency the system searches for the next available channel 6 When the new channel appears press lt 4 to return to the Analog manual install menu 7 Press Av to select Store as new channel then press gt to enter 8 Select Yes then press OK to store the new channel 9 Press MENU to exit Step 3 Fine tune analog channels 1 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press AYP to select Installation gt Channel installation gt Analog manual install L gt The Analog manual install menu appears 3 Press AV to select Fine tune then press gt to enter Press AV to adjust frequency Ui A Press OK to confirm oO ON Oo Press AV to select Store current channel to store channel number Press gt to enter Store current channel Select Yes then press OK to store current channel Press MENU to exit Skip channels 1 2 When watching TV switch to the channel that you want to skip
20. TV can be limited in order to prevent disturbance to other guest e Channels can be blanked Video only e The TV local buttons can be locked Screen information can be suppressed Professional Setup Remote control 2573 optional 4 C button OPTIONS Accesses options relating to the current activity or selection Equals to the function of OPTIONS on Guest remote control 2 E button OK Confirms an entry or selection GB Enters Professional setup menu e Selects SETUP mode first e Press M button to enter the Professional setup menu Note e SETUP mode should be selected for hotel installer EN 23 English Activating the Professional mode setup menu 1 Switch on the TV and select a TV channel 2 Press the following buttons to access Professional mode setup menu 3 1 9 7 5 3 WK MUTE on Guest remote control e M button on Professional setup remote control When SETUP mode is selected on the Professional setup remote control 3 Press AVP on the remote control to select and change any of the settings 4 When done select PBS setting gt Store gt Yes to save the changes Press MENU to exit without saving 5 For Professional mode settings to take effect you must restart the TV mains power 24 EN Professional mode options This paragraph describes the functionality of each item in the Professional mode setup menu
21. be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Warranty e Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself e Use the TV and accessories only as intended by the manufacturer e The caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips Customer Support for service or repairs LAN AN CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO e Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Compliance with EMF oninklijke Philips Electronics N V manufactures and sells many products argeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Busines
22. cted to the TV Loudspeakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality f possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small e Try using a different picture format The picture position is incorrect e Picture signals from some devices may not fit the screen correctly Check the signal output of the device EN 41 English Sound issues There is a picture but sound quality is poor Note e If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected e Check that the volume is not set to 0 e Check that the sound is not muted There is a picture but the sound quality is poor e Check that the sound settings are correctly set There is a picture but sound comes from one speak
23. dby energy continues to be consumed When not in use for an extended period of time disconnect the TV power cable from the power outlet Note e Ifyou cannot locate your remote control and want to switch on the TV from standby press CH a v on the side of the TV Switch channels e Press CH on the remote control or CH aly on the side of the TV e Enter a channel number using the Numeric buttons e Press OK to use the channel grid e Press BACK A CH on the remote control to return to the previous channel Note e When you use a favourite list you can only select those channels in the list Switch channels with the channel grid The channel grid allows you to view all available channels in a grid format e v e vn 1 Press OK L gt The channel grid appears 2 Press Av to browse the channel grid 3 Press OK to select a channel Use teletext e Teletext is not applicable for China 93 models and only for selected models Watch connected devices e Switch on the device before selecting it as a source on the TV Use the source button English venu FORMAT INCR SURRY zot SOURCE Se Gav _ DEMO prin SLEEP FORMAT INCR SURR raar SOURCE an amp 0 E DEMO DALH SLEEP eme 1 Press TELETEXT Ly T
24. de e High The picture backlight is at high power saving mode Switch on Vol When the installer switches the TV on it will play at the specified volume level e Last status If On is selected the TV will be automatically switched to the ast volume status whenever the mains power is turned on The volume level can not exceed the Maximum volume evel e User defined Only appears when you select Last status gt Off The installer can adjust his her preferred switch on volume level Switch on Ch When the installer switches the TV on it will play at the specified channel e Last status If On is selected the TV will be automatically switched to the last channel status whenever the mains power is turned on e User defined Only appears when you select Last status gt Off The installer can choose his her preferred switch on channel vn EN 27 English Welcome message The Welcome message function allows the TV to show a customized greeting to the hotel guest whenever the TV is switched on This helps to personalize the hotel experience for guests The Welcome message can consist of 5 lines of text with each line containing a maximum of 25 alphanumeric characters Use A VY lt P on the remote control to compose the Welcome message Note e Welcome message is always disabled if you select Control settings gt OSD display gt Off e Display message
25. e Press AV to select a language Press OK to confirm Press MENU to exit DU RW N Step 2 Install channels 1 _ Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press Av to select Installation gt Channel installation gt Auto install L gt The Auto install menu appears 3 Select Yes and then press OK to enter 20 EN 4 Select Start then press OK to re install channels e To stop searching select Stop and press OK 5 Press OK when installation is complete Manually install channels This section describes how to search and store analogue TV channels manually Step 1 Select your color and sound system 1 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press Av to select Installation gt Channel installation gt Analog manual install L gt The Analog manual install menu appears 3 Press Av to select Color system then press to enter L gt A list of available color systems appears 4 Press Av to select your color system hen press OK L gt Returns to the Analog manual install menu 5 Press AV to select Sound system then press to enter Ly A list of available sound systems appears 6 Press av to select your sound system hen press OK 7 Press MENU to exit Step 2 Search and store new TV channels 1 _ Press MENU gt PB
26. e a Kensington lock There is a Kensington security slot at the back of the TV Prevent theft by looping a Kensington ock between the slot and a permanent object such as a heavy table 38 EN 9 Product information Product information is subject to change without notice For detailed product information go to www philips com support Supported display resolutions Computer formats e Resolution refresh rate e 640 x 480 60Hz e 800 x 600 60Hz e 1024 x 768 60Hz e 1280 x 768 60Hz e 1360 x 768 60Hz Video formats e Resolution refresh rate e 480i 60Hz 480p 60Hz e 576i 50Hz e 576p 50Hz e 720p 50Hz 60Hz e 1080i 50Hz 60Hz e 1080p 24Hz 25Hz 30Hz 50Hz 60Hz Multimedia e Supported storage device USB Only FAT or FAT 32 USB storage devices are supported e Supported multimedia file formats Images JPEG BMP GIF e Audio MP3 Tuner Reception Transmission e Aerial input 5ohm coaxial IEC75 e TV system PAL B G D K SECAM B G D K NTSC e Video playback NTSC SECAM PAL e Tuner Bands Hyperband S channel UHF VHF Remote control e Type PFO1A09B APAC model PFO1CO9B China model e Batteries 2 x AAA LRO3 type Power e Mains power 110 240V 50Hz Standby power lt 1 W e Ambient temperature 5 to 35 degrees Celsius EN 39 English Suppo
27. e image Rotates a picture e Show info Displays the picture information 3 Press OK to confirm your setting Listen to music 1 In the USB file browser view press AV to select a music track then press OK L gt The selected music starts to play 2 Press the following buttons to control the slide show Button Function OPTIONS Selects Stop playback to pause the music playback D BACK Stops music playback Note e To play other tracks stop the music playback first then press AV to select other tracks from the file browser view Music settings When listening to music press 2 OPTIONS to access one of the following music settings e Start playback Stop playback Starts or stops the music e Repeat Play once Repeats a song Disables repeat play and plays a song or album once e Shuffle on Shuffle off Enables or disables random play of songs e Show info Displays the file name Disconnect a USB storage device Caution e Follow this procedure to avoid damage to your USB storage device 1 Press BACK to exit the USB browser 2 Wait for five seconds then disconnect the USB storage device Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available Check www philips com support for availability Check the current software versio
28. e must be switched on and selected as the source e Philips does not guarantee 100 interoperability with all HDMI CEC devices Enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press Av to select Setup gt Installation gt Preferences gt EasyLink 3 Select On or Off Use one touch play 1 After enabling EasyLink press play on your device L gt The TV automatically switches to the correct source Use one touch standby 1 Press Standby On on the TV s or device s remote control L gt TheTV and all connected HDMI devices switch to standby EN 37 English Use System audio control One touch audio When you connect your TV to HDMI CEC compliant amplifier such as a Home theater system or an AV receiver your TV can switch automatically to play audio from the connected amplifier To use one touch audio you must map the audio input from the connected amplifier to your TV You can use the remote control of the connected amplifier or your TV to adjust the volume Enable or disable remote control pass through Enable one touch play and one touch standby between easylink compliant devices Note Easylink compliant device must be connected to the TV via HDMI connector Us
29. eate customized PayTV channel lists 1 Enters PayTV Setup in the Professional setup menu 2 Sets PayT V channels from the following TV channel lists R1 If Smart RC is On R1 channels marked with X are only accessible via a special low cost PayT V remote control 1 from Philips R2 If Smart RC is On R2 channels marked with X are only accessible via a special low cost PayT V remote control 2 from Philips e RO All available channels Enters to unmark the channels you have marked in R1 and R2 to prevent users from watching full PayTV channels via Guest remote control Note e All non Pay TV channels are listed in RO SmartClone USB to TV Loads the TV configuration data including the video audio channel Table and Professional mode settings from a USB device to the TV set TV to USB Loads the TV configuration data including the video audio channel Table and Professional mode settings from the TV set to a USB device EN 31 English 8 Connect devices This section describes how to connect devices with different connectors Note You can use different types of connectors to connect a device to your TV 2 SPDIF OUT Digital audio output to home theaters and other digital audio systems AUDIO IN Ss i SPDIF OUT i Back connectors eam 6 SERIAL SPDIFOUT EXPRESS BATHROOM
30. enu appears 3 Press to select a value between zero and 240 minutes L gt The sleep timer can be set in steps of five minutes If set to zero the sleep timer is switched off 4 Press OK to switch on the sleep timer L gt The TV switches to standby after the specified time EN 15 English Automatically switch the TV on on timer You can switch on the TV from standby to a specific channel at a specified time 1 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press AVP to select Features gt On timer 3 Press to enter the On timer menu e Activate Selects how often the TV is switched on e Time Sets the time to switch on the TV e Program no Selects the channel or the connected device 4 Press MENU to exit Tip e Select On timer gt Activate gt Off to disable this feature e When On timer is switched off only Activate option is available Use TV locks You can prevent your children from watching certain programs or channels by locking the TV controls Set or change your PIN code 1 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press Av to select Features gt Set code Change code L gt The Set code Change code menu appears 3 Enter your code using the Numeric buttons L gt Follow the on screen instructions t
31. er only e Verify that sound balance is set to the center HDMI connection issues There are problems with HDMI devices e Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device e Ifthe TV does not recognize the HDMI device and no picture is displayed try switching the source from one device to another and back again e Ifthere are intermittent sound disruptions check that output settings from the HDMI device are correct e If you use an HDMI to DVI adapter or HDMI to DVI cable check that an additional audio cable is connected to AUDIO mini jack only 42 EN Computer connection issues The computer display on the TV is not stable e Check that your PC uses the supported resolution and refresh rate Set the TV picture format to unscaled Contact us f you cannot resolve your problem refer to the FAQs for this TV at www philips com support f the problem remains unresolved contact Philips Consumer Care in your country as isted in this user manual Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty Note e Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging 11 Index A Analogue 2
32. external device which then sends an action command back to the TV Remote Control signal processed by Compliant device e g STB then passed to TV Remote Control signal from compliant device received by TV IR then passed to compliant device GND PC IN VGA and AUDIO Audio and video input from a computer PC IN AUDIO 1 SERV U 34 For use by service personnel only EN Side connectors wea EXT SPKR OUT _ EXT SPKR VOL CTRL C USB Data input from USB storage devices USB iS Da Stereo audio output to headphones or earphones Note e When the headphone is plugged in the TV speaker is muted automatically 3 AUDIO L R Audio input from analog devices connected to VIDEO VIS L AUDIO R 4 VIDEO Composite video input from analog devices such as VCRs VOL SPKR SELECT Selects between rotary and tact to operate the volume controller connected with EXT SPKR VOL CRTL Tact Type E vo B VOL SPKR SELECT Rotary Type SI D VOL SPKR SELECT D 2W 8 Q EXT SPKR OUT Audio output to a bathroom speaker via a stereo jack Before you connect the bathroom speaker make sure to turn off the TV mains power HDMI Digital audio and video input
33. from high definition digital devices such as Blu ray players AWG lt 16 EXT SPKR OUT e Blu ray Disc 2W 8Q EXT SPKR OUT Speaker Terminal TT Speaker Terminal NC EN 35 English EXT SPKR VOL CRTL Connector for volume controller via a stereo jack To adjust the volume of bathroom speaker connected with 2W 8 Q EXT SPKR OUT Rotary Type E Tact Type vo B EXT SPKR VOL CTRL i jare 9 EXT SPKR VOL CTRL Rotary A volume Tact A volume T Rotary B volume Tact B volume e GND 36 EN Connect a computer Before you connect a computer to the TV Set the screen refresh rate on your computer to 60Hz e Select a supported screen resolution on your computer Connect a computer with one of the following connectors Connections via DVI or VGA require an additional audio cable HDMI cable HDMI 1 HDMI HDMI 1 HDMI e HDMI cable and HDMI DVI adaptor PC IN AUDIO HDMI 1 HDMI e VGA cable PC IN AUDIO Use Philips EasyLink Your TV supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI connectors can be controlled by a single remote control Note e The EasyLink compliant devic
34. he main index page appears 1 Press SOURCE page app L gt The source list appears 2 Selecta page as follows e Press the Numeric buttons to enter a page number Press OK to confirm your choice e Press CH to view the next or L gt The TV switches to the selected previous page device e Press the Color buttons to select a color coded item e Press D BACK to return to a previously viewed page 3 Press TELETEXT to exit teletext Press AV to select a device WN Adjust TV volume lt I e a 1 1 CH 3 ib r I L To increase or decrease volume e Press 41 To mute or unmute sound e Press to mute the sound e Press K again to restore the sound EN 9 5 Use more of your TV Access TV menus Menus help you to install channels change picture and sound settings and access other features 1 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears E iad Video contrast l Sound Contrast o Brightness E Features oO Color o Installation Hue Sharpness D Software update Noise reduction 2 Press AYP to select and navigate through one of the following menus e Picture Adjusts the picture setting for optimal viewing e Sound Adjusts the sound setting e Features Accesses different features like timer and TV lock e Installation Selects channel installa
35. he remote control and TV is not Source blocked by furniture walls or other objects English 0 9 Numeric buttons Selects a channel or setting PICTURE Smart Picture Launches the picture menu 2 SOUND Smart Sound Launches the sound menu 1 Volume Increases or decreases volume D BACK A CH Previous channel e Returns to a previous screen e Returns to the previously viewed channel BROWSE Switches between channel grid and program list DUAL I II Selects audio languages if dual sound broadcast is available DEMO Used in selected models only Toggles the demonstration menu on or off FORMAT Selects a picture format amp INCR SURR Enables Incredible Surround for stereo sources Enables spatial mode for mono sources EN 7 4 Use your TV This section helps you perform basic TV operations Switch your TV on off or to standby To switch on e Ifthe standby indicator is off press Power at the side of the TV e Ifthe standby indicator is red press Standby On on the remote control To switch to standby e Press Standby On on the remote control L gt The standby indicator switches to red To switch off e Press Power at the side of the TV L gt The standby indicator switches off Tip Though your TV consumes very little power when in stan
36. ical shift Adjusts the picture vertically for PC VGA or HDMI input EN 11 English Change picture format 1 Press FORMAT L gt A picture format bar appears 2 Press AV to select a picture format L gt The selected picture format is activated 3 Press OK to confirm your choice Summary of picture formats The following picture settings can be configured Note Depending on the format of the picture source some picture settings are not available Super zoom Not for HD and PC mode Removes the black bars on the side of 4 3 broadcasts There is minimal distortion 4 3 Shows the classic 4 3 format Subtitle zoom Not for HD and PC mode Displays 4 3 pictures over the full area of the screen with sub titles visible Part of the top of the picture is clipped off Movie expand 14 9 Not for HD and PC mode Scales 4 3 format to 14 9 12 EN Movie expand 16 9 Not for HD and PC mode Scales 4 3 format to 16 9 Wide screen Scales 4 3 format to 16 9 Unscaled For HD and PC mode only and in selected models only Allows maximum sharpness Some distortion may be present due to the broadcaster s systems Set your PC resolution to wide screen mode for best results Use smart sound Use smart sound to apply pre defined sound settings 1 Press SOUND L gt The Smart sound menu appears 2 Press AV t
37. lect Blank Channel gt On Current channel will not display video on the TV Ea e To restore a blank channel switch to the blank channel and select Blank Channel gt Off e When PBS setup menu is on press CH to switch the channel or source Multi RC e A special remote control is needed Please contact your local Philips sales person for more information Remote control supports up to four televisions operating in one room without interference from each other s remote controls Each TV and he Guest remote control can be set to match each others 1 Enters Multi remote control and designate one color Blue Off Green Yellow Red to the TV Sets the Guest remote control to the corresponding color by pressing MENU and one of the color button simultaneously for more than 4 seconds 3 The Guest remote control can operate the TV with the corresponding color 30 EN e EXAMPLE Press MENU and Red button simultaneously on the Guest remote control for more than 4 seconds to operate the TV with Red color selected in Multi remote control menu e Guest remote control will be set to default Blue color after replacing batteries Smart RC e Off PayTV channels are accessible via the Guest remote control e On PayTV channels are only accessible via a special low cost PayT V remote control from Philips PayTV Setup This function allows you to cr
38. n 1 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press AYP to select Software update gt Current software info L gt The TV displays the current software information Download the software 1 on your PC open a web browser and go to www philips com support Download the latest software upgrade file to your PC 2 3 Decompress the ZIP file 4 Copy the autorun upg file to the root directory of the USB device Update using a USB device 1 Connect your USB device to the USB port at the side of your TV 2 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears LJ Press AVS to select Software update gt Local updates gt USB Press OK to update the TV software manually A Ui Follow the on screen instructions to complete the update Note e The TV restarts after the software update is complete 0 Disconnect a USB storage device Caution e Follow this procedure to avoid damage to your USB storage device Wait for five seconds before you disconnect the USB storage device Change TV preferences Use the preferences menu to customise your TV settings 1 _ Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press ava to select Installation gt Preferences e Location Optimises TV
39. o create or change your PIN code Tip e If you forget your code enter 8888 to override any existing codes Lock or unlock the TV Lock the TV to prevent access to all channels and connected devices 1 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press ava to select Features gt TV lock L gt You are prompted to enter your PIN code 3 Enter your code using Numeric buttons L gt The TV lock menu appears 4 Press AV to select Lock or Unlock 5 Press OK to confirm L gt All channels and connected devices are locked or unlocked 6 Press MENU to exit Note e Switch the TV off and on again for the change to take effect e If you select Lock you have to enter your code every time you turn on your TV Lock or unlock one or more channels 1 When watching TV press OK to display he channel grid Press AVP to select a channel to lock or unlock Press OPTIONS Press AV to select Lock channel or Unlock channel For each selection press OK to lock or unlock the channel L gt You are prompted to enter your PIN code U AW N 6 Enter your code and press OK L If the channel is locked a lock icon is displayed 7 Repeat the process to lock or unlock more channels Note Switch the TV off and on again for the change to take effect e Ifyou access the locked channels by pressing CH
40. o select the following settings e Standard Adjusts sound settings to suit most environments and types of audio e News Applies settings for spoken audio such as news e Movie Applies settings for movies e Custom Applies the settings that were customized in the sound menu Press OK to confirm your choice L gt The selected smart sound setting is applied Manually adjust sound settings 1 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears 2 Press AV to select Sound and press OK 3 Press AVP to select the following settings e Smart sound Accesses pre defined smart sound settings e Bass Adjusts the bass level e Treble Adjusts the treble level e Volume Adjusts the volume e Balance Adjusts the balance of the right and left speakers e Dual I II Selects audio languages if dual sound broadcast is available e Mono Stereo Selects mono or stereo if stereo broadcast is available e Surround Enables spatial sound e Auto volume levelling Automatically reduces sudden volume changes for example when switching channels e Delta volume Levels out volume differences between channels or connected devices Switch to the connected device before you change the delta volume Use advanced teletext features Note e Teletext is not applicable for China 93 models and only for selected models
41. p menu can be accessed by both Guest remote control Press 3 1 9 7 5 3 iK MUTE and the Professional setup remote control Press M button On Professional mode setup menu can only be accessed by the Professional setup remote control HDMI CEC in HDMI CEC Philips EasyLink enables one touch play one touch standby and one touch audio between HDMI CEC compliant devices Note Before activating HDMI CEC in function make sure the HDMI CEC compliant devices are urned to on e Selects EasyLink gt On first before enabling HDMI CEC in in Professional mode e Refer to page 37 Use Philips EasyLink for more details about HDMI CEC function e Off Disables HDMI CEC feature in Professional mode On Enables HDMI CEC feature in Professional mode USB break in Enables or disables USB break in feature in Professional mode Off When USB is plugged in the Multimedia menu will not appear automatically but users can access Multimedia menu from the Consumer setup menu On When USB is plugged in the Multimedia menu appears automatically Enable teletext Only for selected models e Off Disables teletext in Professional mode On Enables teletext in Professional mode Blue mute Sets the background color when there is no signal on TV e Off The background color is set to black On The background color is set
42. rder in which they appear 1 2 When watching TV press OK to display he channel grid Press OPTIONS L gt The channel options menu appears Press AVY to select Reorder then press OK Select the channel to rearrange then press OK L gt The selected channel is highlighted Press AV to move the highlighted channel to the desired location then press OK Press OPTIONS L gt Done reordering appears on the screen Press OK to confirm Press D BACK to exit the channel grid 7 Professional mode instruction Introduction Included in this TV is a special functional mode that allows the TV to be configured for commercial application This feature is called Professional mode This section has been designed to help install and operate this TV in Professional mode Before reading this section please read section 3 to 6 to set the basic functionality of this TV Benefits of Professional mode This TV is specially designed to operate in Professional Mode Professional Mode offers the following benefits e Access to the Consumer Menu can be blocked This prevents users e g guests from deleting or changing channel settings and or modifying picture and sound settings This ensures that TVs are always set up correctly e A switch on volume and channel can be selected After switching on the TV will always start on the specified volume level and channel e The maximum volume level of the
43. rted TV mounts To mount the TV purchase a Philips TV mount To prevent damage to cables and connectors be sure to leave a clearance of at least 2 2 inches or 5 5cm from the back of the TV Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage TV screen Required Required size inches pitch mm mounting bolts 2 12mm 32 200x200 4xM6 37 200x200 4xM6 42 400x200 4xM6 40 EN Product specification Design and specifications are subject to change without notice 32HFL5332 e Without TV stand e Dimension WxHxD 778 5 x 509 x 79 6 mm e Weight 10 kg e With TV stand Dimension WxHxD 778 5 x 553 x 222 mm e Weight 11 8 kg 37HFL5382 e Without TV stand Dimension WxHxD 901 5 x 579 7 x 89 5 mm e Weight 12 5 kg e With TV stand e Dimension WxHxD 901 5 x 623 75 x 237 mm e Weight 14 5 kg 42HFL5382 e Without TV stand e Dimension WxHxD 1011 4 x 650 1 x 90 6 mm e Weight 15 6 kg e With TV stand Dimension WxHxD 1011 4 x 6991 x 256 6 mm e Weight 18 8 kg 10 Troubleshooting This section describes commonly encountered issues and accompanying solutions General TV issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Check that the po
44. s Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health K Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health 3 Your TV Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome This section gives you an overview of commonly used TV controls and functions Please read section 3 to 6 to set the basic consumer menu first then follow the instructions in section 7 to set the Professional mode menu Side controls and indicators O VOL Increases or decreases volume Q CH A V Switches to the previous or next channel source MENU Toggles the home menu or confirm selected item INPUT Selects connected devices OO Power Switches the product on or off The product is not powered off completely unless it is physically unplugged
45. s Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and o stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms hat if its products are handled properly for their intended use they are safe o use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips o anticipate further developments in standardisation for early integration in its products Copyright man H ensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in her countries throughout the world DEFINITION MULTIMEDIA INTERFACE DMI the HDMI logo and High Definition ultimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC All other registered and unregistered trademarks are the property of their respective owners 2 Important Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of electric shock or fire ever expose the TV to rain or water ever place liquid containers s
46. settings for your location home or shop e Volume bar Displays the volume bar when you adjust the volume e EasyLink Enables one touch play one touch standby and one touch audio between EasyLink compliant devices Press amp lt 4P to select your preference Press OK Press MENU to exit Ui A w Reset the TV to factory settings You can restore the default picture and sound settings of your TV The channel installation settings remain the same 1 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears Press AVP to select Installation gt Factory settings Press gt to enter Factory settings Select Reset to start resetting Press OK Press MENU to exit DURW N EN 19 English 6 Install channels The first time you set up your TV you are prompted to select a menu language and to install TV and digital radio channels if available This chapter provides instructions on how to re install and fine tune channels Automatically install channels This section describes how to search and store channels automatically Step 1 Select your menu language Note e Skip this step if your language settings are correct _ Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears Press AV to select Installation gt Menu language Press to enter Menu languag
47. t of the TV power cord or antenna cable Risk of hearing damage e Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures e Ifthe TV is transported in temperatures below 5 C unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care e Avoid stationary images as much as possible Stationary images are images hat remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e To avoid deformations and color fading wipe off water drops as soon as possible Disposal of your old product and batteries ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused K When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic product
48. tion menu adjusts preferences and resets the TV to factory settings e Software update Updates the TV software Press OK to confirm your choice Press MENU to exit A Ww Note In PBS mode the Guest Menu simply provides Picture Sound Feature and Multimedia Only available if USB device is plugged items Change picture and sound settings Change picture and sound settings to suit your preferences You can apply pre defined settings or change settings manually e When watching TV or using external devices press OPTIONS then select Picture and sound for quick access to picture and sound settings Use smart picture Use smart picture to apply pre defined picture settings 1 Press O PICTURE L gt The Smart picture menu appears 2 Press AV to select one of the following settings e Vivid Applies rich and dynamic settings e Standard Adjusts picture settings to suit most environments and types of video e Cinema Applies settings for movie viewing Game Applies settings for games e Energy saving Applies low energy settings e Natural Applies the best picture quality e Custom Lists customized picture settings 3 Press OK to confirm your choice L gt The selected smart picture setting is applied Manually adjust picture settings 1 Press MENU gt PBS Settings gt Consumer Setup gt Yes L gt The consumer menu appears
49. uch as vases near the TV If liquids are spilt on or into the TV disconnect the TV from he power outlet immediately Contact Philips Consumer Care to have the TV checked before use ever place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk Risk of injury or damage to the TV Two people are required to lift and carry a TV that weighs more than 25 kg When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result
50. wer cable is securely connected The remote control is not working properly e Check that the remote control batteries are correctly inserted according to the orientation e Replace the remote control batteries if hey are flat or weak e Clean the remote control and TV sensor ens The standby light on the TV blinks red e Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the TV lock feature e Enter 8888 The TV menu is in the wrong language e Change the TV menu to your preferred anguage When turning the TV on off to standby you hear a creaking sound from the TV chassis o action is required The creaking sound is normal expansion and contraction of he TV as it cools down and warms up This does not impact performance TV channel issues Previously installed channels do not appear in the channel list e Check that the correct channel list is selected Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the TV source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is properly conne
Download Pdf Manuals
Related Search