Philips 30PF9975/69 Flat Panel Television User Manual
Contents
1. Press e the 1 or key to adjust the volume e the P CH keys to select the TV channels or sources The MENU OK key can be used to summon the main menu without the remote control Use e the lt 1 and keys and the P CH and P CH keys to select menu items in the directions as shown e the MENU OK key to confirm your selection Note When activated via the MENUIOK key on top of the TV only Exit lets you dismiss the menu Navigate to Exit and press the MENUIOK key Use of the remote control RC4301 Note For most keys pressing a key once will activate the function Pressing a second time will de activate it When a key enables multiple options a small list will be shown Press repeatedly to select the next item in the list The list will be removed automatically after 4 seconds or press OK to remove immediately Remark in VGA mode only some keys are valid VER DVD SAT AMP CD N See Audio and Video equipment keys p 19 4 Select your computer or other peripherals See p 17 X y a N aE Audio and Video equipment keys see p 19 Instant record See Record with your recorder with EasyLink p 19 Time display The time is displayed on the screen ew 2 Surround mode Se Incredible surround With stereo transmission and when Incredible surround is selected it seems as though the loudspeakers are spread further apart from one another Virtual Dolby surround2. 1 EXT 3 YPbPr or FRONT you can not select another TV programme on the screen Attention Recording from YPbPr will only have black and white pictures 19 Ge Care of the screen Do not touch push or rub or strike the screen with anything hard as this may scratch mar or damage the screen permanently And please do not rub with dust clothes with chemical treatment Do not touch the surface with bare hands or greasy cloth some cosmetics are detrimental to the screen Unplug the TV before cleaning the screen When the surface becomes dusty please wipe gently with absorbent cotton or other soft materials like chamois soaks Do not use acetone toluene and alcohol because they cause chemical damage Do not use liquid cleaners or aerosol cleaners Wipe off saliva or water drops as soon as possible Their long time contact with the screen causes deformations and colour fading Poor Picture Have you selected the correct TV system in the manual installation menu e Is your TV or house aerial located too close to loudspeakers non earthed audio equipment or neon lights etc e Mountains or high buildings can cause double pictures or ghost images Sometimes you can improve the picture quality by changing the direction of the aerial e Is the picture or teletext unrecognisable Check if you have entered the correct frequency See Installation Manual installation p 6 Are brightness sharpness and contrast out of adju
3. Optimal with Dolby surround signals Enables you to experience the effect of Dolby surround Pro Logic reproducing a rear sound effect See Sound menu 3D effect p 11 Note You can make the same selection in the Sound menu surround mode p 11 E no function no function pia Freeze To freeze the picture Dependent on the input signal the function may not be possible S J HON O O0O00 Standby Press to switch the TV on or off When switched off a red indicator on the TV lights up in Pixel Plus demo on off In the right part Pixel Plus and Digital Natural Motion are switched on Teletext On Off see p 13 OK Press this key to activate your choice when in the menus to display the programme list MENU Main menu on off see p 5 A To adjust the volume WX Interrupt the sound or restore it P Programme selection To browse through the TV channels and sources stored in the favourite list 0 9 Digit keys To select a TV channel For a two digit programme number enter the second digit before the dash disappears To switch immediately to a selected one digit TV channel keep the digit key pressed a bit longer P P Previous TV channel Press to display the previously selected TV channel x A OOO 0000 Active Hontrol 0000 On Screen information Press to display when available information about the
4. Store 3 or 2 digits of the frequency or the channel number directly with the digit keys O to 9 e g 048 Press the cursor down to proceed Repeat to search for another TV channel Give name Give name Install Space Delete BBC1 e BBC2 x ABCDEFG 123 HIJKLMN 456 CNN OPQRSTU 789 TVE VWXYZ 0 Shift Special It is possible to assign a name to a TV channel A name with up to 5 letters or numbers can be given to the programme numbers 0 to 99 Note It is not possible to rename the VGA source Reshuffle the programme list You can change the order of the stored TV channels Select Favourite TV channels AVGA source always belongs to the list of Favourite programmes Select Favourite programmes in the Install menu Select your programme number with the cursor up down oO o O 0 o Select Give Name in the Install menu and press the cursor down Select the programme number Note keep the cursor up down pressed to scroll through the programme list quickly Press the cursor right A keyboard appears on the screen Press the cursor right to enter the keyboard Press the cursor up down left right to select the first character and press OK Repeat for every character you want to enter Select Space to enter a space Delete to erase the highlighted character in the name entered Shift to display upper or lowercase characters on the keyboard Special to display special characters
5. see Select TV setup General p 8 Smart picture Select Smart picture to display a list of predefined picture settings each corresponding with specific factory settings Personal refers to the personal preference settings of picture in the picture menu Digital options Pixel Plus is the most ideal setting doubles the horizontal resolution and increases the number of lines with 33 You may consider to select Movie Plus in case a halo effect should disturb you Dependent on your own preference select Progressive scan Dynamic contrast Sets the level at which the TV automatically enhances the details in dark middle and light areas of the picture DNR Dynamic Noise Reduction This sets the level at which noise is measured and reduced in the picture Colour enhancement This makes the colours more vivid and improves the resolution of details in bright colours Hue This compensates for the colour variations in NTSC encoded transmissions Picture format This will adjust the size of the picture dependent on the broadcast format and your preferred setting Active Control The TV continuously measures and corrects all incoming signals in order to provide the best picture possible O Press the amp key on the remote control The Active Control menu appears O Press the cursor up down to select the Active Control values Off Minimum Medium recommended or Maximum The picture settings are being optimised continuously and
6. Select Centre input On When having selected On you can adjust the Centre in volume with the cursor left right to correct volume level differences of the external audio receiver and speakers The Demo menu allows to demonstrate the TV features separately or in a continuous loop If Auto demo has been selected the demo will automatically present the features sequentially in a loop Press one of the cursor keys to stop the Auto demo If one of the features has been selected this particular feature demo will run only once and the Demo menu will reappear Note The Dealer demo is not part of the automatic sequence and can only be activated separately arena y ee Press the MENU key on the remote control to summon the main menu Note Dependent on the input signal one or more menu items may not be selectable Press the key on the remote control to get information about the selected menu item Picture menu Picture Sound Features TV Smart picture Contrast Brightness Colour Sharpness Tint Digital options Dynamic contrast DNR Colour enhancement Hue Picture format 10 O Press the cursor right to select Picture Select the menu items in the Picture menu with the cursor up down Adjust the settings with the cursor left right or enter the list of submenu items with the cursor right Select a submenu item with the cursor up down Note To remove the menu background before adjusting the picture settings
7. automatically which is displayed by bars The menu items can not be selected Press the cursor right to select Smart Picture Press the cursor up down to select one of the predefined picture settings Sound Sound Press the cursor right to select Active Display Press the cursor up down to select Show bars one of the Dual screen demos or Off When you select Dynamic contrast Pixel Plus Digital Noise Reduction or Digital Natural Motion the TV screen is divided into two parts in the left part the selected picture quality setting is switched off in the right part it is switched on Note Dependent on the input signal one or more Dual screen demos may not be selectable Press the amp key again to switch off the Active Control menu Press the cursor right to select Sound Select the menu items in the Sound menu with the cursor up down and adjust the settings with the cursor left right Remember control settings are at normal mid range Smart sound Equalizer Volume Balance Headphone volume Surround mode Dual 1 11 Mono Stereo Digital Analogue 3D effect AVL Delta volume levels when the bar scale is centred Smart sound Select Smart sound to display a list of predefined sound settings each corresponding with specific factory settings of Treble and Bass Personal refers to the personal preference settings of sound in the sound menu Notes Dual FI is only available with du
8. the cursor in the up down direction to select the TV adjustments Setup Demo or Install menu OK key to Use the cursor left right to select Picture Sound or activate Features return or switch Note Sometimes not all the menu items are visible on the screen main menu on off indicated by a cluster of blue balls Use the cursor down or right to reveal all items Use the cursor in the left right direction to select the menu item Use the cursor up down again to select the control you want to select or to adjust Note Items temporary not available or not relevant are displayed in a light grey colour and cannot be selected Installation The installation menu contains the following items Language Automatic Manual Give name Reshuffle Favourite install install programmes Install o o 0 00 O EasyLink If your video recorder has an EasyLink function during installation the language and available channels are automatically transmitted to the video recorder Select the menu language the menu language Language Install Press the MENU key on the remote control English Use the cursor down to select Install Frangais Use the cursor right to select Language Be Follow the instructions on screen Use the cursor up down to select your preferred language and press the OK key to confirm your selection Proceed with the Install menu Store TV channels TV channels After languag
9. to select one of the favourite pages to the list Press the MENU key to watch the page Use the P4P key to browse through the list of favourite pages Search Selecting a word On the keyboard on screen you can type in a random word you want to search for in the teletext pages Whether upper or lowercase is used has no influence o 102 03 04 05 06 07 08 09 10 11 12 l WORD pudes Y o Cancel O Accept NAME 8 O Space O Delete FOOTBALL ABCDEFG 123 HIJKLMN 456 OPQRSTU 789 VWXYZ 0 Shift Special Red Green Yellow Blue Press the cursor right to enter the keyboard Press the cursor left right up down to select the characters words or functions Press the OK key to confirm each character selected Select Cancel to cancel the word Space to enter a space Delete to delete the last character selected Shift to switch between lowercase or capital characters Special to display special characters on the keyboard and press the OK key Press the cursor left repeatedly to return to the Teletext menu again 14 Searching a word Type in the word on screen or select a word from the history list on the right and press OK Select Accept and press OK again The message Searching appears To cancel the searching or to search for a new word select Keyboard and press OK O When a word is not found a message appears When the word is found it is highlighted in the teletext page To continue t
10. 7 S VHS IN yellow AUDIO OUT Right red AUDIO OUT Left white EXT 2 S VHS OUT yellow Note EXT1 can handle CVBS and RGB EXT2 CVBS Y C and RGB EXT3 CVBS Y Pb Pr 480p 576p 1080i VGA IN can handle VGA SVGA XGA and 480p 576p 1080i It is preferred to connect peripherals with RGB output to EXT1 or EXT2 as RGB provides a better picture quality Note If your recorder is provided with the EasyLink function it should be connected to EXT2 to benefit from the EasyLink functionality 15 Recorder VCR DVD RW Note Do not place your recorder too close to the screen as some recorders may be susceptible for signals out of the display Keep a minimum distance of 0 5 m to the screen ar x VCR 1 Connect the aerial cables O and to obtain the optimum picture quality supplied cable AG as shown If your recorder has S VHS video jacks For improved picture quality connect the supplied cable C with the S VHS video jacks instead of cable Other equipment satellite receiver decoder DVD games etc DVD 16 O Connect the aerial cables and G as shown only if your peripheral has TV aerial in output O Connect your equipment with the supplied cable B 4 or to one of the euroconnectors EXT1 2 or 3 to obtain a better picture quality Make a selection in the Setup Source menu p 9 With Component Video Output Connectors YPbPr Connect the three separate
11. LV PHILIPS Contents installation a A 2 ela Keys On top of the TV uueuueiesisisieiisnenneneinannennen iee 2 If this instruction manual does Your remote control useenn nn 3 4 not give an answer or if Tips do use the menus 5 nat sae your TY prallen yaw a SEE can call your Local Philips Cec Ene men TANABE s Customer or Service Centre See Store TV channels u 6 aa the supplied World wide Automatic installation issie 6 guarantee booklet Manual installation ais 6 Please have the Model and Give NAME anne nennen 7 e which you can Reshuffle the programme list AT ijin A R aff your Select favourite TV channels 7 television set or on the packaging ready before calling TV setupimenl su een 8 the Philips helpline General sinsa E a 8 Model 30PF9975 69 SOURCE iii 9 Product NO e e Demo Care of the screen See Tips p 20 COI TV menu Picture menu eococncococononinononinnneninnnononnnennonononnonononnnnanannnnn 10 11 Sound MEN snieni iNi E rs E ENE 11 Features menu cccccscsssssessssssesssseessssesssssesssessessessesseeeteseees 12 Teletext nennen 13 14 2 End of life directives Philips is paying a lot of attention to producing environmentally friendly in green focal areas Your new TV contains materials which can be recycled and reused At the end of its life specialised Connect peripheral equipment companies can dismantle the discarded TV to co
12. MENU to switch the menu on or raf VCR DVD CD off e or pause P for chapter channel track e gt 0 for record selection al 44 for rewind VCR CD 0 to 9 digit entry search down DVD AMP PP tape index VCR 000 a for stop select a DVD chapter A gt for play select a frequency AMP gt gt for fast forward VCR CD VCR timer search up DVD AMP og surround on off AMP CD CA to select your choice of cursor up down to select the next or the previous disc CD subtitle language DVD RDS news TA AMP to shuffle play CD to select a DVD title RDS display AMP info on screen CD display information cursor left right to select the previous or following track CD search up down AMP Selecting submodes for DVD RW SAT CDR The remote control should be in TV mode e digit 1 DVD mode is selected O Press the OK key together with digit 2 DVD RW mode is selected e digit 3 SAT RC5 mode is selected e digit 4 SAT RC6 mode is selected e digit 5 CD mode is selected e digit 6 CD R mode is selected Record with your recorder with EasyLink In TV mode it is possible to start a direct recording of the programme which is being displayed on the TV screen Continue to press the record key on the remote control for more than 2 seconds Note Switching programme numbers on your TV does not disturb recording When recording a programme from a peripheral connected to EXT
13. al sound transmission Mono Stereo is only selectable in case of analogue stereo transmission Digital Analogue is only selectable in case of digital transmission 11 Features menu Features TV Programme list Off Subtitle On Sleeptimer On during mute Child lock On timer Zoom Programme list Press the OK key to switch over to the selected TV channel or external Select subtitles The subtitle page must be stored for each TV channel Switch on teletext and select the proper subtitle page from the index Switch off teletext Subtitle On will automatically display them on the selected TV channels if subtitles are in the transmission A symbol will indicate that the mode is on Select On during mute when you want to have the subtitles automatically displayed only when the sound has been muted with the mK key on the remote control On timer Select On timer with the cursor down VCR1 Sunday BBC2 Monday ua Off CONN u n timer O On TVE Daily 15 45 gt Select On with the cursor right Press the cursor right again to enter the programme list Select the TV channel or external you want your TV to switch to on a selected time and day Press the cursor right again to select a day of the week or to select Daily Press the cursor right once again to enter the time with the digit keys or with the cursor up down and press the OK key to activate Press the MENU key to turn
14. ation Note When subtitles is switched on see Features p 12 display of the programme number is not possible Programme title Select Programme title Yes or No When selected Yes after the selection of aTV programme or after pressing the key on the remote control a TV channel which broadcasts teletext may transmit the name of the TV channel or the programme title When selected No the programme title will only appear after pressing the key and not after the selection of a TV channel Auto Surround Sometimes the broadcaster transmits special signals for Surround Sound encoded programmes The TV automatically switches to the best surround sound mode when Auto Surround is switched On Teletext level 2 5 Some broadcasters offer the opportunity to see more colours other background colours and nicer pictures in the teletext pages Select Teletext level 2 5 oo Press the cursor right to select Teletext level 2 5 On to take advantage of this feature Press the cursor right again to select Teletext level 2 5 Off if you like the more neutral teletext layout The selection made is valid for all channels which broadcast teletext level 2 5 Note It may take a few seconds before teletext broadcast switches over to Teletext level 2 5 Set Change code The Child lock feature see TV Features p 12 allows you to lock channels to prevent others from watching certain programmes To watch locked channels a 4 digit c
15. component video cables to the DVD player s Y U Pb and V Pr jacks and to the Y Pb and Pr jacks on the TV Connect the audio cable to the DVD player s AUDIO L and R jacks and to the L and R audio YPbPr jacks on the TV Front connections Camera or Camcorder Connect your camera or camcorder as shown Connect to VIDEO 2 and AUDIO L Q for mono equipment For stereo equipment also connect AUDIO R S VHS quality with an S VHS camcorder is obtained by 58 connecting the S VHS cables with the S VIDEO input 1 and 90000 AUDIO inputs G aa Do not connect cable D and at the same time This may cause ead picture distortion fs OQ af Headphone O Insert the plug into the headphone socket as shown Press K on the remote control to switch off the internal loudspeakers of the TV The headphone impedance must be between 8 and 4000 Ohm The headphone socket has a 3 5 mm stereo jack In the Sound menu select Headphone volume to adjust the headphone volume Multi channel Surround receiver Connect the audio cable to the multi channel Surround receiver and to AUDIO OUT L and R at the bottom of your TV 4 If you want the loudspeakers of your TV to act as centre Pd _ f CENTRE IN _ PL ae 9 09 speaker also connect an audiocable to the multi channel 3 ee Su 4 ph Surround receiver and to the CENTRE IN at the bottom of your TV Q Sel
16. e is set correctly you can now search for and store the TV channels in two different ways using Automatic Installation or Manual Installation tuning in channel by channel Select your choice with the cursor right Select Automatic install in the Install menu Note All channels must be unlocked in order to autoprogram If requested enter your code to unlock all channels See TV Automatic install Features menu Childlock p 12 Automatic installation Install Press the cursor down The autoprogramming option label Start appears Install Start Press the cursor right O The message Searching appears and the progress of autoprogramming is displayed When the Automatic installation is complete the puck navigates to Install again The channel list is automatically filled with all the channels numbers of the TV channels transmitted Note Channels numbers and names will always be written in Latin characters even when a language has been selected which uses other characters Manual installation Searching for and storing TV channels is done channel by channel You must go through every step of the Manual Manual install Installation menu Install f Select Manual install in the Install menu Selection mode Press the cursor down System Programme Follow the instructions on screen Search Note Search or direct selection of a TV channel Fine tune If you know the frequency the C or S channel number enter the
17. ect Centre Input On in the Source menu See p 9 The loudspeakers of the TV will now only produce centre sound the loudspeakers connected to the audio receiver will produce Surround Sound The volume has to be controlled via the multi channel Surround receiver Note No sound will be heard when a TV channel or external source is blocked via the Child lock menu see p 12 To select connected equipment Press the key on the remote control repeatedly or select Source in the Setup menu see p 9 to select EXT1 EXT2 EXT3 YPbPr FRONT or VGA according to where you connected your equipment Remark Most equipment decoder recorder carries out the switching itself when it is switched on 17 Connect your computer O Connect one end of aVGA cable 1 to the video card of the computer and the other end to the VGA connector at the bottom of the TV Fix the connectors firmly with the screws on the plug In case of a Multimedia computer connect the audio cable 2 to the audio outputs of your Multimedia computer and to the AUDIO R right and L left inputs of the side panel The VGA IN connector allows the following TV and monitor display modes EDTV 640 720 x 480p 720 x 576p HDTV 1920 x1080i VGA 640 x 480 60 Hz SVGA 800 x 600 56 Hz XGA 1024 x 768 60 Hz Note If possible use the XGA1024x768 60Hz video mode to obtain the best image quality for your LCD monitor Recorde
18. eft right Press the MENU key to turn off the zoom function Teletext Most TV channels broadcast information via teletext This TV has a 1200 pages memory that will store most broadcasted pages and subpages to reduce waiting time After each programme change the memory is refreshed Switch Teletext on and off Press to switch the teletext on 102 03 04 05 06 07 08 09 10 11 12 BBC CEEFAX 102 Mon 05 Feb 16 35 22 LIONS RECORD ANOTHER WIN 430 Index 100 News 300 BBC Info 110 Headlines 305 Children 120 Weather 400 Cookery 150 Sports 415 Education 200 Radio 500 Lottery 230 Travel 550 Finance 240 Subtitling 888 Music 280 TV Listings 600 Red Green Yellow Blue Select a Teletext page Enter the desired page number with the digit keys the cursor keys up down left right or with the P key Select the options at the bottom of the screen with the colour keys Previously selected teletext page Only possible in case there is no list of favourite teletext pages available See p 14 Press the P P key Select the index teletext page Press the grey colour key to display the main index usually p 100 Only for T O P teletext broadcasts Press i A T O P overview of the teletext subjects available is displayed Select with the cursor up down left right the desired subject and press the OK key Not all TV channels broadcast T O P teletext Select subpages When a selected teletext pa
19. ge consists of different subpages a list of available subpages appears on the screen Press the cursor left or right to select the next or previous subpage Enlarge a Teletext page Press repeatedly to display the upper teletext part the lower teletext part and then to return to the normal teletext page size When the teletext page is enlarged you can scroll the text line by line using the cursor up down Hypertext With hypertext you can quickly jump to a pagenumber or search for a specific word shown on the current teletext page Press the OK key to highlight the first word or a number on the page Use the cursor up down left right to select any other word or number you want to search for Press the OK key to confirm The search starts A message appears at the bottom of the screen to indicate the searching or that the word or page is not found Use the cursor up to exit hypertext 13 Teletext menu Press the MENU key to activate the menu Press the cursor up down to select the menu items Press the cursor right to activate Reveal Reveals conceals hidden information on a page such as solutions to riddles and puzzles Press the cursor right to activate Favourite This list contains up to eight favourite teletext pages Only the pages of the current channel can be selected Press the cursor right to enter the list Press the cursor right again to add the current page or
20. he search press the OK key Cycle subpages if available Makes the subpages cycle automatically Press the cursor right to activate and to de activate again Timed page To display a specific page from a selected TV channel at a certain time Press the cursor right and select Yes or No Enter the time and pagenumber with the cursor keys or the digit keys Notes Teletext does not have to remain switched on but you should watch the TV channel you have selected the specific page from It is not possible to display a timed page when in VGA mode Press the cursor left to return to the TV menu again Language If the displayed characters on screen do not correspond with the characters used by the teletext broadcaster you can change the language group here Select Group 1 or Group 2 with the cursor right Press the MENU key to leave the Teletext menu Connect Peripheral Equipment There is a wide range of audio and video equipment that can be connected to your TV The following connection diagrams show you how to connect them 3 special cables scart to cinch are provided with your TV AUDIO IN Right red A AUDIO IN Left white A f m VIDEO IN yellow AUDIO OUT Right red EXT 1 amp 2 IN OUT AUDIO OUT Left white EXT 3 IN VIDEO OUT yellow B VIDEO yellow mia AUDIO Left white AUDIO Right red EXT 1 2 3 ae AUDIO IN Right red AUDIO IN Left white c
21. ment shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on it Keys on top of the TV RENNER _ Bu ES Picture Sound Features TV Setup Install Exit Insert the aerial plug firmly into the aerial socket I at the bottom of the TV For best picture quality use the suppressor aerial cable supplied O To connect your computer see p 18 To connect other peripherals see p 15 In order to obtain the best result please use only the supplied antenna cables between the TV and videorecorder and between videorecorder and antenna connector Insert the mains cord supplied into the mains at the bottom of the TV and in the wall socket having a mains voltage of 220 240V To prevent damaging the power AC cord which could cause a fire or electric shock do not place the TV on the cord Remote control Insert the 2 batteries supplied Type R6 1 5V The batteries supplied do not contain the heavy metals mercury and cadmium Please check on how to dispose of exhausted batteries according to local regulations Switch the TV on Press the power switch l at the right side of the TV An indicator on the front of the TV lights up and the screen comes on If the TV is in standby mode press the P keys or the key on the remote control Should your remote be lost or broken you can still change some of the basic settings with the keys on top of your TV
22. ncentre the Connecting and selecting EQUIPMENT sssrini 15 18 reusable materials and to minimise Audio and Video equipment keys nnsennsensenneennennsennsennennnenne 19 the amount of materials to be Record with your recorder with Easy Link 0 19 disposed of a OO Tips nam 20 TV according to local regulations cas DONO EasyLink features are based on the one touch operation approach This means that a sequence of actions are executed at the same time in both the television and the video cassette recorder provided both are fitted with the EasyLink function and connected with the eurocable supplied with your video recorder Grea o O Wall mounting instructions For the wall mounting instructions follow the illustrated steps on the separate template Make sure that the wall mount is being fixed securely enough so that it meets safety standards The weight of the TV excl packaging is about 17 kg How to mount the supplied stand see the separate leaflet Note other not supplied stands are optional accessories Consult your dealer Place or hang the TV wherever you want but make sure that air can circulate freely through the ventilation slots Do not install the TV in a confined space such as a book case or a simular unit To prevent any unsafe situations no naked flame sources such as lighted candles should be placed on or in the vicinity Avoid heat direct sunlight and exposure to rain or water The equip
23. ode must be entered The Set Change code menu item allows you to create or change a Personal Identification Number PIN Select Set Change code oo If no code exists yet the menu item is set to Set code If a code has previously been entered the menu item is set to Change code Follow the instructions on screen Important You have forgotten your code Select Change code in the General menu and press OK Press the cursor right and enter the overriding code 8 8 8 8 Press the cursor again and enter a new personal 4 digit code The previous code is erased and the new code is stored Source Source Setup EXT1 EXT2 EXT3 YPbPr FRONT Centre input Centre in volume This menu allows you to indicate the peripheral you connected to one of the external inputs Press the cursor right to enter the list of types of peripherals attached to the selected input Select the peripheral device with the cursor up down TV Setup Demo Auto demo Install Dealer demo Digital options Light sensor Comb filter Once you have selected the source type e g DVD this source will automatically be selected when your remote control is in DVD mode see p 3 and when you press the key on the remote control Centre input Centre in volume When you have connected a surround receiver to the TV see p 17 the loudspeakers of the TV can act as centre speaker making a separate centre speaker unnecessary
24. off the menu Note To check your timer settings press the key 12 Press the cursor right to select Features Select the menu items with the cursor up down and adjust the settings with the cursor left right Use the on screen Menu Info for more information about the menu items Child lock Note A VGA source can not be locked Select Child lock Lock Child lock O Custom lock _ Lock after Unlock Programme lock Press the cursor right to enter the Child lock menu You re summoned to enter your code Note You have to re enter your code each time you enter the child lock menu Important You have forgotten your code See p 8 Select one of the menu items of the child lock menu e Lock if you want to lock all channels and externals e Custom lock and press the cursor right Select Lock after if you want to lock all programmes from a certain time onwards Press the cursor right and enter the time with the cursor up down and right Press the OK key to validate Programme lock if you want to lock a certain TV channel or external e Select Unlock to disable all locks you have set Zoom Note Dependent on the input signal Zoom may not be selectable O Select Zoom with the cursor down and press the ok key Press the OK key to select one of the zoom magnifications x1 x4 x9 x16 Additionally you can shift the selected zoom window over the screen with the cursor keys up down l
25. on the keyboard Press OK to confirm Press the cursor left repeatedly when you have finished the name giving Select another programme number and repeat steps to O Select Reshuffle in the Installation menu Follow the instructions on screen Select Yes or No with the cursor right Repeat and for every TV channel or external you want to make a favourite or a non favourite TV channel or external TV Setup Setu The Setup menu contains items that control the settings General Setup Menu background Factory settings OSD Programme title Teletext level 2 5 Auto surround Set Change code General of the TV s functions features services and peripherals you may have connected The General menu allows you to change settings that will typically be accessed only occasionally The Source menu allows you to select a source Press the key on the remote control to get information about the selected menu item This menu allows you to change various settings that are presumably adjusted less frequently than most other settings Menu background Select Yes or No to turn the menu background on or off Factory settings This resets the picture and sound settings to their predefined factory values but maintains the channel installation settings OSD On Screen Display Select OSD Select Normal to activate extended channel and programme information Minimum will display reduced channel inform
26. onsumes energy in the standby mode Energy consumption contributes to air and water pollution Power consumption 2 W No stable or not synchronised VGA picture Check if you have selected the correct VGA mode in your PC See the separate instruction manual with the monitor Miscellaneous Ambient temperature 5 35 C Mains 50 60 Hz Auto Voltage ranging from 198 V to 264V Power consumption around 160 W Standby consumption 1 W Weight excl packaging 17 kg Dimensions wxhxd 891x489x110 20 3104 315 2244 2 PHILIPS
27. r or DVD with EasyLink The recorder VCR or DVD RW or DVD can Press the MENU key on the remote control be operated with the remote control via the Recorder or DVD menu on screen Select the Recorder or DVD menu with the cursor up down Recorder 9 9 0 0 _O ooo Press the cursor left right up down to select lt lt lt E gt 0 a one of the recorder or DVD functions Rwd PI St Pl Ff R Eject ji e NC The key for recording can be operated in the TV DVD mode a O O g gt O If your EasyLink recorder has the system standby a 4 E gt o 42 function when you press the key for 3 seconds Prev Play Stop Play Next Eject both TV and the recorder are switched to standby 18 Audio and video equipment keys Most of the audio and video equipment from the Philips range of products can be operated with the remote control of your TV Press the Select key to operate any of the equipment indicated in the display Another device can be selected by pressing Select repeatedly within 2 seconds The led will blink slowly to indicate the device Press one of the keys on the remote control to operate the peripheral equipment To return to TV mode press Select while the led is blinking When no action is taken within 60 seconds the remote goes back to TV mode Note When the Select key is pressed and hold for more than 2 seconds the RC5 RC6 system select command is transmitted 10 to switch to standby
28. selected TV channel and programme Menu Remote control info When a menu is on screen press to display info on the selected menu item While the menu info is displayed press any key to display remote control info The normal function of the key is not executed no function amp Active control see p 11 Picture format Press this key repeatedly or press the cursor up down to select another picture format Auto format Super zoom 4 3 Movie Expand 14 9 Movie Expand 16 9 Subtitle zoom Wide screen or 16 9 43 EN iu lo O Si Movie Expan d 16 9 Subtitle zoom Wide screen 16 9 Auto format makes the picture fill the screen as much as possible In case of subtitles in the bottom black bar Auto format makes the subtitles visible In case of a broadcaster logo in the corner of the top black bar the logo disappears from the screen Super zoom removes the black bars on the sides of 4 3 programs with minimal distortion When in Movie Expand 14 9 Movie Expand 16 9 Super zoom or Subtitle zoom picture format you can make subtitles visible with the cursor up down Note With signals via YPbPr or the VGA IN connector less picture formats are selectable gt Gee e mens SSCS O Press the MENU key on the remote control to summon the main menu At any moment you can exit the menu by pressing the MENU key again Picture Sound Features CED TV art Setup Demo Install cursor to select e Use
29. stment Select Factory settings in the Setup General menu p 8 No Picture e Are the supplied cables connected properly The aerial cable to the TV the other aerial to your recorder the VGA cables to the display the power cables e Has the child lock been switched off e Is your PC switched on Do you see a black screen and the indicator in front of the TV lights up green this means that the display mode is not supported Switch your VGA source to a correct mode e In case of weak or bad signal consult your dealer Digital distortion The low quality of some digital picture material may be the cause of digital image distortion In this case select the Soft setting using the Picture menu Smart Picture without changing the picture settings manually No sound No sound on any channel Check the volume isn t at minimum e Is the sound interrupted with the mute key mK No solution found for your picture or sound problem Switch your TV off and then on again once Never attempt to repair a defective TV yourself Check with your dealer or call a TV technician Menu Have you selected the wrong menu Press the MENU key again to exit from the menu Remote control Check if the remote control is in the correct mode e If your TV no longer responds to the remote control the batteries may be dead You can still use the MENU OK key and the keys on top of your TV Standby Your TV c
Download Pdf Manuals
Related Search