Philips 22HFL3XX8D/10 Flat Panel Television User Manual
Contents
1. Switch on picture format This setting allows you to set a switch on picture format The power on function allows the TV to enter a specific mode On Standby or Last status of operation when the mains power is activated cold start On The TV will always turn on show startup channel after the mains power is connected Standby When set the TV will always turn to standby status as defined in Low power standby option after the mains power is connected Smart Power The power consumption for the Smart power mode is defined by the Smart Picture setting in the TV Setup part Off The TV will start with Standard Smart Picture setting but the setting can be changed in the guest setup mode On The TV will start with default Smart Picture setting and Smart Picture setup and is not selectable in the guest setup Welcome message The settings from this submenu will allow you to configure the welcome message which is displayed at every power ON Display message On To enable the welcome message Off No welcome message 18 Professional settings Display message Switch on settings Welcome message Line 2 Welcome logo Clear Hotel information Message Time out Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Display message Professional settings Switch on settings Line 1 Welcome message Welcome logo Clear Hotel information M2. Clock setup tongs Afterwards define the country in which the TV is installed Country selection Time offset And if it is required the Time offset 2 Go to Installation and enable MyChoice Multi remote contro MyChoice Sma tPay Das Erste Lith iy The Netherlands In this case three options are available These are OFF This means that MyChoice is disabled and the packages are not available ON MyChoice is enabled but will only work with scratch cards ON Credit MyChoice is enabled and it is accepting the codes generated by MyChoice website and also the codes generated with scratch cards 3 First step in MyChoice setup is to enable the function Ask for PIN Set the option to ON to enable the possibility to enter the pin code 30 PHILIPS 4 Defining the channel packages is the second step in the MyChoice configuration Based on the pin code the TV channels will be displayed Three packages are available Free package This package will include all channels which are available without any pin code To add a channel to a ring you have to select the channel and press OK to tick the box in front of the channel icome message Ask for PIN elcome logo Free Package tel information Package 1 ntrol settings Package 2 K setup Das Erste hr fernsehen Bayerisches FS Siid 1 2 3 4 SWR Fernsehen 5 BBC1CI aker settings 6 BBC 1 East W 7 BBC 1 London 8 BBC 1 West 9 BBC 2 E
3. PHILIPS Philips Hospitality TV Installation Manual for 22HFL3XX8D 10 26HFL3XX8D 10 32HFL3XX8D 10 42HFL3XX8D 10 Status Approved Version 1 0 Date June 2013 Author Marian Pufulete PHILIPS Contents 1 Requirements before starting the INSTAIIATION siccscccocansenavactovsndecadsnsanvanaciovaeseatnwcabvandsensesavecanossecanave aeucebousincndeseavdoarvens 2 2 Findou tthestate ofthe TV pensussrire aE E E 3 Be REAT e E E E E E R ater A E E E E E A E 4 ee WEVS UPTON EEE E A E A E E E E E O A E E E ners 6 a CANA OMOR aonr ea A A ee 13 a Reorderinge Channels scsrsesseri araea E E EEEE S 13 Fos IAPC DELALE E AE A E E E A E E A A E 15 0 Fel SV NI SUS enar E E E E E E E E tei teas T E E E E E 15 C Pror ON SEES r E TE ee ee 16 Ze AN KOMO LOCO inr A E 27 PA HONO RNA OM e EE E T 27 B C e E E E E ene E E A E eeuentocuan 28 ASG SS eE E ceotenta a boteubar uestv obs vottaniue seventies venaniaaedanbecsoustins 29 10 CSM Consumer Setup Menu aie daccsdenc sins icacaentdccnsoonndedueatienasicnisaceuseieanaaaiccaduesdeanssaniessanossaneiuanieadiseicsaanaantnessumisannen 33 PHILIPS 1 Requirements before starting the installation Before starting the installation make sure that you have everything you need at hand Master remote control 22AV8573 or Guest remote control 22AV1109C And USB stick You will need the master remote control or the guest remote control to access the menus To access the setup menu press the
4. MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Combine channel list Hotel information Control settings Clock setup Speaker settings MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Combine channel list Hotel information Control settings Clock setup Speaker settings MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Combine channel list Hotel information Control settings Clock setup Speaker settings MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Combine channel list Hotel information Control settings Clock setup Speaker settings MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Combine channel list Hotel information Control settings Clock setup Speaker settings MyChoice setup ThemeTV Configuration ThemeTY Channel Setup Combine channel list Hotel information Control settings Clock setup Speaker settings pene MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Combine channel list Blank channel Auto channel update Auto software update Skip scrambled signals Multi remote control MyChoice ThemeTV SmartPay Blank channel Auto channel update re update Skip scrambled signals Multi remote control MyChoice ThemeTV SmartPay Blank channel Auto channel update Auto software update Multi remote control MyChoice ThemeTV SmartPay Blank channel Auto channel update Auto software update Skip sc
5. RC5 SETUP key and then press the Home Menuw button For the guest remote control press the following keys sequential 3 1 9 7 5 3 MUTE Note The sequence 3 1 9 7 5 3 MUTE will not show the Setup Menu if High Security Menu is enabled For cloning settings from one TV to another TV you will need to have a USB stick This stick needs to be formatted as FAT32 and should be empty For the best guest experience check if the software version on the TV is the latest one This can be done using the Master Remote control by pressing Recall Button and checking on page 2 1 Current Main Software This also can be done with the Guest Remote by pressing 1 2 3 6 5 4 Go to http www support philips com su Enter the model number and check to confirm you have the latest version available Confirm the software version present on TV is identical with the one from website If not please download the latest version from website unzip and save on to a USB key The USB key must be formatted as FAT32 and preferably empty to avoid and accidental upload of wrong setting and software Follow the instruction how to upgrade the software If the software version from your TV is identical with the one available on website it is not necessary to upgrade If an upgrade is necessary you can upgrade and clone files at the same time automatically Upgrade gt Automatic Reboot gt Clone See Instant Initial Cloning The Initial instant cl
6. Country selection To select the original country from the channel chosen at Download program Time offset To set the time offset In case the clock download information is not correct for your region you can set an offset here to correct this Note Selectable value between 12 and 12 23 Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Installation MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Switch on settings Welcome message Weleome logo Hotel information Control settings Clock setup Installation MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Switch on settings Welcome message Welcome logo Hote information Control settings Clock setup Installation MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup a settings _ MyChoice setup ThemeTV Configuration Hotel information Control settings Clock setup Speaker settings MyChoice setup TherieTV Configuration ThemeTV Channel Setup Combine channel list TV speaker enable Independent main spe beaker enable Independent main spe TV speaker enable Blank channel Auto channel update Auto software update Skip scrambled signals Multi remote control MyChoice ThemeTV SmartPay Blank channel 7 BBC 1 East W A
7. Enable teletext Enable MHEG Enable subtitle RC lock Of OSD display On High security OnStartUp Auto scart HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle Enable USB OSD display High security Auto scart HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle Blue mute High security Auto scart HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle Enable USB Blue mute Digit timeout Enable teletext Enables or disables the use of Teletext OSD on pressing the Teletext button Off Disables Teletext On Enables Teletext Enable MHEG Enables or disables the use of MHEG OSD on pressing the MHEG button Off Disables MHEG On Enables MHEG Enable EPG Enables or disables the use of EPG OSD on pressing EPG button Off No EPG services available Now amp Next EPG Now Next services available 8 Day EPG EPG 8 Day services available Note EPG availabilitv depends on local conditions Enable subtitle Enables or disables the use of subtitles in a DVB broadcast channel Off No subtitle services available On Subtitle services available Enable USB Off Disables USB multimedia functions On Enables USB multimedia functions Feature is not influencing cloning and or software upgrade via USB Blue mute Off The background color is set to black in case of no
8. Finish 12 5 Channel options To reorder TV channels you need the channel plan from the Professional Settings menu In the consumer menu you cannot rearrange channels The Professional Settings menu can be accessed by using the Yellow remote RC 22AV8573 Master Remote control and pressing the MENU Button or with the TV remote press 3 1 9 7 5 3 MUTE The Professional Settings menu will appear like in the picture below Go to the Channel setup option and press OK to access the submenu Professional mode Room ID Consumer setup P USB to TV Control TV to USB Clock setup RF to TV Speaker settings Reset Installation MyChoice setup ThemeTV Configuration The warning message which informs you that all unsaved changes will be discarded will popup Select Yes and press the OK to confirm You are entering Channel Setup All changes not stored in PBS setup will be discarded The channel grid will contain all installed channels TVP INFO Unknown sem CBeebies With the channel grid displayed press the OPTION button on the remote control to display settings for channels 13 PHILIPS Select Reorder and Press the OK button on the remote control to reorder channels Add favourites Lock channel List Filter Rename Reorder Hide channel Show hidden channels Navigate to the channel that you want to move and press OK on the remote control to s
9. The Symbol Rate options are Automatic and Manual If you do not know the correct values for this option please use the Automatic option Analogue channel If you don t have or you don t want to install analogue channels you can disable the search for this type of channels Free scrambled options are Free channels The TV will search only for free to air channels skipping the scrambled channels Free scrambled The TV will search for free and scrambled channels The Reset option will reset the search settings to default After you have checked or changed settings you can select Done and select Start to start the channel search mei allation Snes 6 search channels now his can take a few minutes During the channel search you can see the progress bar and how many channels are found at that time 3 System searching Please wait Digital channels found Analogue channels found Step 1 Total progress When the search is done you should see Channel search complete and a summary of the channels found Press OK button on remote control to finish the search Channel search complete Digital channels found Analogue channels found If you would like to change the picture and sound settings you can go to Optimize TV picture and sound and press the OK button on remote control Optimize TV picture and TV Channels Installed sound A wi
10. Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Local KB lock OSD display High security Auto scart HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle Local KB lock RC lock OSD display High security Auto scart HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle Local KB lock RC lock OSD display High security Auto scart HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Local KB lock RC lock OSD display High security HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle Local KB lock RC lock OSD display High security Auto scart SHOMICEC in USB break in Enable teletext Enable MHEG Enable EPG Local KB lock RC lock OSD display High securit
11. cycle of the TV and press the MyChoice button again you can enter the same pin code if this code is still valid Important remark If you enter a new pin code the previous code will become invalid despite the fact that code could be still valid Example If you enter a pin code for Package 1 valid for 24 hours and after 4 hours you entered a pin code for Package 2 the pin code for Package 1 will become invalid the TV will report the message above The TV will only save the last pin code entered the previous ones will become expired 32 PHILIPS 10 CSM Consumer Setup menu The CSM contains data about the TV software serial number and other details The menu can be accessed using a standard remote control or using the master remote control 1 Using the standard remote control press the following key sequence 1 2 3 6 5 4 2 Using master remote control 22AV8753D Press the RECALL button for the CSM Notes Activation of the CSM is only possible if there is no user menu on the screen How to save the CSM content on USB stick 1 Insert the USB stick 2 Enter the CSM 3 The CSM content will be saved on USB stick as a text file 4 File name example CSM_32HFL3008D10_FZ1A1146015773 txt a Where 32HFL3007D10 is the TV model number b Where FZ1A1046015773 is the TV serial number 33
12. on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Switch on settings Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional sectings Switch on settings Weicor o me message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Switch on channel Switch on vol Z Max volume Switch on picture for Power On Smart power Auto fill Auto zoom Super zoom Movie expand 16 9 Wide screen Switch on channel Switch on vol Max volume W Switeh on picture f Power On Smart power 43 Switch on channel On Standby Last status Switch on vol Max volume Switch on picture for Smart power Switch on channel Switch on vol Max volume Switch on picture for Power On Display message Line 1 Line 2 Clear Message Time out Line 1 Line 2 Clear Message Time out Maximum volume This option specifies the maximum allowable volume level of the TV Selectable value from 00 until 60
13. video signal on selected source On The background color is set to blue in case of no video signal on selected source 22 Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings installation MyChoice setup ThemeTV Configuration Switch on settings Welcome message Welcome logo Hotel information Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Switch on secungs Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChotce setup ThemeTV Configuration ThemeTV Channel Sewp Switch on settings Welcome message Welcome logo Hotel informaton Control settings Speaker settings Installation MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Switch on setungs Welcome message Welcome logo Hote information Control settings Speaker settings Installanon MyChoice setup ThemeTY Configuration ThemeTV Channel Setup Switch on settings Welcome message Welcome logo Hotel information Control settings Speaker setungs Installation MyChoice setup ThemeTY Configuration ThemeTV Channel Setup Switch on semings Welcome message Welcome logo Hotel information Control settings Speaker semings installation MyChoice setup ThemeTY Configuration ThemeTV Channel Setup Auto scart HDMI CEC in USB
14. 30 seconds Display logo Enables disables to show the stored welcome Logo at start up when TV starts up in Green Mode see Power Settings Off When set to Off the TV will hide the Welcome Logo at start up On When set to On the TV will show the Welcome Logo at start up Note If no welcome logo is loaded the feature is greyed out USB to TV This option will upload the welcome logo from the USB stick to the TV s internal memory 19 Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup Professional settings Switch on settings Welcome message Welcome logo Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Switch on settings Welcome message Welcome logo Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Switch on settings Welcome message Welcome logo Hotel information Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Switch on settings Welcome message Welcome logo Hotel information Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Display information Info key enable USB to TV info key enable On USB to TV Startup Display informa
15. Home for installation If you select SHOP an e sticker banner will be displayed on the TV This is for commercial purpose only Now you can select the visual and hearing impaired options If you select On your TV will automatically turn on settings to help visual and hearing impaired people THE MOST COMMON OPTION IS TO TURN THIS FUNCTION OFF Allow universal access settings for the visually and hearing impaired On the following page we can start the channel installation wizard You can also press Back to correct any previous setting We recommend you only select your preferred options as this will result in longer installation times Now you can start the TV installation and setup For the channel installations select Install TV channels and press OK Optimize TV picture and sound Install TV channels Add your devices Then you can select Continue and press OK again The TV will search and install all available channels Press Continue Here you can select the type of channels you would like to install and what preference you will use Antenna installs all analog and all Cable DVB C and Antenna DVB T digital DVB T channels To install press ok Antenna DVB T DVB C and Antenna DVB T JAntenna install all able and all digital DVB B T channels lo install It is advisable to check the settings before starting the search Star
16. USB to TV TV to USB RF to TV Switch on channel Switch on vol Max volume Switch on picture for Power On Smart power Switch on channel Switch on vol HDMI side Max volume YPbPr Switch on picture for SCART Power On AV ABC News 24 ABC1 ABC1 ABC ABC4 ABC3 BBC 1 CI Switch on channel Switch on vol Max volume Switch on picture for Power On Smart power TV to USB RF to TV Option used for Smartlnstall Note Setup and configuration for Smartinstall is not covered by this manual Reset Reset all settings from Professional mode to default values Switch on settings All settings from this submenu are applied when the TV set is powered ON Switch on channel When the TV is switched on it will start up on the specified source channel Available EXT1 EXT2 VGA HDMI HDMI side AV side or one of the installed TV channels Switch on volume When the guest switches the TV on it will play at the specified volume level Selectable value from 00 until 60 17 Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeT Configuration Professional setings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Switch
17. ay by means of pressing the Theme TV button on the RC or automatically after starting up the TV On Show Theme TV on the display after pressing the Theme TV button on the RC Off Theme TV disabled Startup Show Theme TV on startup and able to show the Theme TV by pressing the TTV button on the RC MyChoice In this manual we will cover only the configuration of MyChoice on TV all details about the account and credit are covered in a different manual Please contact your TP Vision country sales manager to setup an account and buy the credits During the installation of the TV sets please collect the following information TV model 101 32HFL3008D 10 FZ1A Room number TV model and serial number are required on MyChoice website when rooms are configured Make sure that all values are correct because the MyChoice website is generating pin codes based on this information You can gather all these details during the installation and afterwards enter them in the administration part of the MyChoice website How to configure the MyChoice is described below 1 The most important step for MyChoice is the clock If the clock is not defined or the TV doesn t have the correct time MyChoice will display the following message MyChoice is not available please contact the reception 29 PHILIPS Enter the Professional menu go to Clock setup and configure the Download program Download program Country selection Time offset
18. break in Enable teletext Enable MHEG Enable EPG Enable subtitle Enable USB Blue mute Selectable AV Enable MHEG Enable EPG Enable subtitle Enable USB Blue mute Digit timeout Selectable AV Watch TV HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle Enable USB Blue mute Digit timeout Selectable AV Watch TY Download program Country selection Time offset iiiad Country selection Time offset Download program Time offset Download program Country selection HDMI side YPbPr SCART AV 4 ABC News 24 ABC ABC ABC ABC4 ABC3 BBC 1 CI BBC 1 East W BBC 1 London BBC 1 West 10 BBC 2 England 11 CBeebies oo suy puna ww Turkey UK Ukraine Others Australia New Zealand Digit timeout Defines the time interval between numeric buttons when users press digits on the remote control Selectable values from 0 5 to 9 9 seconds Selectable AV Allows the installer to define which external sources to be displayed on the source list when pressing AV button on the Guest remote control Note Only the sources marked X appear in the source list Watch TV Select the function for Watch TV button on the remote control Clock settings Settings for the TV clock Download program To select channel to download clock information Note Correct clock information is needed to provide correct EPG data and to have MyChoice working
19. d will be discarded during the transition to Consumer Mode If you want to start an installation from scratch you can always re install the TV This can be done by using the option Re install TV set If the Professional mode is active you can access the setup menu by pressing the RC5 SETUP key and then press the Home Menu button For the guest remote control press the following keys in sequence 3 1 9 7 5 3 MUTE then go to TV Setup confirm with OK This menu will appear Guest menu If the Professional mode is disabled you can access the Setup menu with the guest remote control Select Setup and press OK Quick picture and sound Search for channels TV settings Select the option TV settings for this menu Quick picture and sound Search for channels Update software Watch demos Press OK to access the sub menu navigate to Reinstall TV Sound Restore style General settings Backlight contrast Colour Sharpness Noise reduction MPEG Artefact reducti Digital Crystal Clear Advanced Format and edges Menu language Picture Clock Sound General settings Sleep timer Auto switch off EasyLink Location TV placement Universal access Key beep Factory settings Press OK to reinstall TV set Menu language Clock Sleep timer Auto switch off EasyLink Are you sure you want to reinstall the TV All settings will be reset and insta
20. e pin code is valid for Package 2 Few configurations possible are Package 2 Free channels VIP Channels Note VIP channels can contain channels which are included in Package 1 and a few extra Package 2 Free channels Package 1 VIP Channels 31 PHILIPS Each package can be configured independently without having any influence on other packages but you have to keep in mind that after activation the TV will show only the channels which are ticked for this package Press Menu to exit the Professional menu and store all settings 5 Check the MyChoice functionality Power ON the TV and wait to see the Switch on channel Press the MyChoice button on the remote control The following window will appear on TV I VID BCDFNP mern 063051 Enter the pin code received from the website or generated with a scratch card After entering the pin code press OK to submit the code If the pin code is correct the following message will be displayed Also the message will display the remaining viewing time w Your PIN is correct Your remaining viewing time is 24hrs Omins After few seconds the message will disappear and the channel grid will pop up showing all channels available The MyChoice channels will have a star inside the box If you enter an invalid pin code or an expired pin code the following message will be displayed ey PIN code is incorrect or expired Please try again Note If you do a power
21. elect that channel a m TYP nof d v The arrows around the channel indicate that the channel is selected and can be moved Use the arrow keys to move the channel to the new position When you have reached the new position press OK on the remote control to confirm the new position of the channels T The former channel is moved to 4 Once you finished with the reordering press Options on the remote control again Press OK on the remote control to confirm that you are done with the re ordering 14 PHILIPS b Rename channels Select the channel press the Options button on remote control and select Rename to change name of a channel If you then press the OK button a virtual QWERTY keyboard will pop up Add favourites Lock channel List Filter Rename Reorder Hide channel Show hidden channels c Hide channels Important You cannot delete channels from the channel grid but you can use the option to hide the channels Select the Channel press the Options button and select Hide channels You will see an H in the channel square Add favourites Lock channel List Filter Rename Reorder Hide channel Show hidden channels Select Show hidden channels if you want to see all channels hidden or not hidden Using this option will not remove the hidden attribute Meaning for the letters in the top left corner A Analogue channe
22. essage Time out Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Display message Switch on settings Line 1 Welcome message Line 2 Welcome logo Clear Hotel information Message Time out Control settings Clock setup Speaker settings Installation MyChoice setup Professional settings Display message Switch on settings Line 1 Welcome message Line 2 Welcome logo Control settings Clock setup Speaker settings Installation MyChoice setup sitili Professional settings Switch on settings Welcome message HH Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTY Configuration Display logo Professional secungs Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Clear Hotel information Message Time out Line 1 Line 1 First line of the welcome message When pressing OK button on remote control while editing line 1 or 2 a virtual keyboard will pop up on screen Note Maximum 20 characters per line Line 2 Line 2 Second line of the welcome message Clear Will delete the current welcome message Message Time out Sets the period of time to display the welcome message on the screen when TV is turned on from standby Selectable values 20 25
23. essional mode l A shortcut to enter the consumer installation menu Switch on settings Room ID Welcome message Consumer setup Welcome logo Channel setup Hotel information USB to TV Control settings TV to USB Clock setup RF to TV Consumer installation menu should be accessed to change e g picture and sound settings and update channels Speaker settings Reset Note Using this shortcut will trigger a popup screen which warns about losing hs settings in the Professional settings menu if you continue Select discard if you want to stay in the Professional settings menu or continue ThemeTV Configuration Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional mode Room ID Consumer setup Channel setup USB to TV TV to USB RF to TV Reset Professional mode Room ID Consumer setup Channel setup Channel setup A shortcut to enter the channel grid In this grid you can reorder rename and hide channels Note Using this shortcut will trigger a popup screen which warns about losing settings in the Professional settings menu if you continue Select discard if you
24. ker settings TTV4 Name Installation TTV5 Name MyChoice setup TTV6 Name ThemeTV Configuration ThemeTV Channel Setup Combine channel list Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Combine channel list Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration ThemeTV Channel Setup Combine channel list MyChoice configuration Free Package Channels free to view Package 1 Package with channels available only with valid MyChoice pin code Package 2 Package with channels available only with valid MyChoice pin code ThemeTV Configuration Edit the names for ThemeTV categories Note ThemeTV setup is not included in this manual To select the TV channels for every ThemeTV category Note ThemeTV setup is not included in this manual The channels marked with X will be part of this selected ThemeTV ring Select or deselect can be done by pressing Combine channel list AV Add connected devices to the channel list Media Add multimedia files to the channel list After storing professional settings the TV will restart to apply the new parameters Now you can clone all settings to other TV sets by using the option TV to USB and USB to TV Check how to clone settings 26 7 Welcome Logo IMPORTANT Total amou
25. lled channels will be replaced If all is correct select Start now and press OK After this operation the TV will power off and on and display the installation wizard Note All settings are at default values and no channel plan is available i y E _ i ri p E W V When you turn on the TV for the first time or you have reinstalled the TV you should see the following screen BearapcKn Seleccione el idioma Cesky Dansk Deutsch Eesti keel EAAnvixa English Espanol Francais Irish Here you will need to select your preferred language Please select with the Up and Down arrow keys and confirm with OK or press the Left arrow key After this you will need to select the country Depending on the country selection some pre defined settings will be activated because of local broadcast requirements Example digital analog channels could be disabled reordering and deleting channels can in some cases not be possible Note If you are experiencing some issues after selecting your country please select Others in the menu Select your country then iiias Greece Hungary Ireland Italy Kazakhstan Latvia Lithuania Luxembourg The next step is to select Wall mounted or On a TV stand This option changes some settings for the audio and image of the TV Wall mounted TV placement The next step is to choose between the options Shop and Home Select
26. ls H Hidden channel not available in the channel grid These channels are shown only If the Show hidden channels option is used 15 Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Professional mode Room ID Consumer setup Channel setup USB to TV TY to USB Professional Settings Settings especially designated for hospitality Clock setup RF to TV Speaker settings Reset Installation MyChoice setup ThemeTV Configuration Professional Mode Professional settings Professional mode Swatch on settings Room ID Off The TV operates as a basic consumer TV Welcome message Consumer setup Welcome logo Channel setup Ege e ahahha On All settings in the Professional Settings Setup menu are Clock setup RF to TV active Speaker settings Reset Installation MyChoice secu E amp uit t i Only by switching on this mode the TV will act as a Hospitality TV Room ID Professional settings Professional mode Switch on settings Room ID Entry field to store 4 digits to set the Room Identifier Welcome message Consumer setup Welcome logo Channel setup Hotel information USB to TV Control settings TV to USB Clock setup RF to TV Speaker sextings Reset j _ Room ID can be used to distinguish between different Choice setup floors rooms setups when using SmartInstall ThemeTV Configuration Consumer setup Professional settings Prof
27. ngland 10 CBeebies allaoon Choice setup meTV Configuration me lV Channel Setup nbine channel list In this case the Free package contains five channels the rest of the channels will not be available if there is no code entered Package 1 In package 1 you can add the channels which will be available with the MyChoice pin code felcome message Ask for PIN lelcome logo Bayerisches FS S d SWR Fernsehen BBC 1 CI BBC 1 East VV BBC 1 London BBC 1 West BBC 2 England Free Package stel information Pach i mirol settings Package 2 ock Setup 8 taker settings emeTV Configuration pmeTV Channel Setup mbine channel list Keep in mind that the MyChoice pin code for package 1 will enable only the channels from this package To have a proper package configuration add all the Free channels to this package If you don t add the Free channels in this package after the MyChoice activation the channel plan will include only Extra channels without possibility to view the Free channels package Package 1 Free Channels Extra channels Note Extra channels can contain some movie channels or sport channels like HBO Comedy Central Sky Sport Package 2 In this package you can add channels which will be activated with a different MyChoice pin code This package can contain Free channels Package 1 and another few channels which will be available only if th
28. nt of size for Hotel Information and Welcome Logo MUST be smaller than 12 Mb megabyte There are 2 Philips logos displayed at startup The second logo can be replaced by picture uploaded via USB File format 1280 x 720 png file Note below timing values are approximate indications and can differ from real situation 2 sec 1 5 sec 3 sec PHILIPS Hotel Logo How to upload Welcome Logo Create graphics file 1280 x 720 png with logo File name TPM1012HE_WelcomeLogo png File name is case sensitive Save into the TV cloning data folder TPM1012HE CloneData Insert USB device into TV Enter Professional settings menu Select Welcome logo Select USB gt TV Select Display logo Select On to enable Welcome Logo 10 Store setting when exiting the Professional setup menu S o N p p ee Ne 7 1 Hotel Information Any JPEG can be used for the Hotel information and triggered from consumer menu screen How to upload page Hotel Info 1 Create JPEG s graphics file with maximum resolution 1920 x 1080 2 File name TPM1012HE_Hotellnfo jpeg File name is case sensitive a For multiple files as Hotel Info the names should be consecutive TV will create a slideshow Example for 4 pictures as Hotel Info TPM1012HE_Hotellnfo jpeg TPM1012HE_Hotellnfo1 jpeg TPM1012HE_Hotellnfo2 jpeg TPM1012HE_Hotellnfo3 jpeg Save the file into the TV cloning data folder TPM1012HE _CloneData Insert the USB device into the TV Enter Pr
29. ofessional settings menu Go to Hotel Info Select USB gt TV Select Display information Select On to enable Hotel Information 10 Store setting when exiting the Professional setup menu O CON DWM BH WW 27 PHILIPS 8 Clone With cloning it is possible to copy to from a USB device TV the configuration data and the channel list data Place a USB Memory stick in the USB side connector of the TV USB device should be formatted as FAT or FAT32 Access the Professional menu by pressing the RCS SETUP key and then press the Home Menuw button For the guest remote control press the following keys in sequence 3 1 9 7 5 3 MUTE Access the Professional settings and go to USB to TV 1 Select USB to TV and press OK 2 The clone data will be loaded from the USB device into the TV To activate the loaded settings wait until the OSD message is displayed to remove the power cord 3 Remove and re insert the power cord TV to USB 1 Select TV to USB and press OK 2 The clone data will be loaded from the TV into USB device 3 Wait until the OSD message returns to its earlier state before removing the USB device Instant initial clone A TV out of the box will trigger the instant initial cloning Before connecting the power cord and power on the TV insert the USB key with cloning data After power on the TV will search on the USB key for cloning files it will clone and the TV will power down Af
30. on the RC for about five seconds TV1 The TV will listen to a 1 RC Press and hold both the menu and number 1 button on the RC for about five seconds TV2 The TV will listen to a 2 RC Press and hold both the menu and number 2 button on the RC for about five seconds TV3 The TV will listen to a 3 RC Press and hold both the menu and number 3 button on the RC for about five seconds TV4 The TV will listen to a 4 RC Press and hold both the menu and number 4 button on the RC for about five seconds TV5 The TV will listen to a 5 RC Press and hold both the menu and number 5 button on the RC for about five seconds TV6 The TV will listen to a 6 RC Press and hold both the menu and number 6 button on the RC for about five seconds TV7 The TV will listen to a 7 RC Press and hold both the menu and number 7 button on the RC for about five seconds TV8 The TV will listen to a 8 RC Press and hold both the menu and number 8 button on the RC for about five seconds TV9 The TV will listen to a 9 RC Press and hold both the menu and number 9 button on the RC for about five seconds Press and hold the OK button for about five seconds to check the current color of the Multi Remote settings of TV and user remote Theme TV With Theme TV it is possible to activate a customizable user interface to select up to 15 different themes that contains Channel references Theme TV can be presented on the displ
31. oning option can only be used if you reinstall the TV or if the TV is out the box PHILIPS 2 Find out the state of the TV It is important to know if a TV is in virgin mode out of the box or installed before If you can see this screen below you know that the TV is in virgin mode and you can install the set See chapter 4 of this manual Bbarapckn Seleccione el idioma Cesky Dansk Deutsch Eesti keel EAAnviKa English Espanol Francais Irish If you power on the set and then press the Home button on the guest remote you will see this screen appear if the TV already has been installed or the wizard was already skipped Professional Settings ON Professional Settings OFF Guest menu You can start the installation wizard again by reinstalling the TV as explained in chapter 3 of this manual Disable the Professional Settings Access the setup menu press the RC5 SETUP key and then press the Home Menu button For the guest remote control press the following keys in sequence 3 1 9 7 5 3 MUTE Go to Professional Mode and select the OFF option and confirm with OK Go back with the arrow keys and select Store settings Confirm with OK After restarting the TV the PROFESSIONAL SETTINGS mode will be set to OFF Note All settings can be done without disabling the Professional Mode but all settings from the Professional Settings which were not save
32. rambled signals Multi remote contro MyChoice ThemeTV SmartPay Blank channel Auto channel update Auto software update Skip scrambled signals Multi remote control MyChoice ThemeTV SmartPay Blank channel Auto channel update Auto software update Skip scrambled signals Multi remote control MyChoice SmartPay Blank channel Auto channel update Auto software update Skip scrambled signals Multi remote control MyChoice ThemeTV Auto channel update ON Enables automatic channel update OFF Disables automatic channel update Auto software update ON Enables software update OFF Disables software update Skip scrambled signals Off Allows scrambled channels in the channel list On Skips the scrambled channels in the channel list Multi remote control To set the color of the TV in multi remote Guest remote control supports up to four televisions operating in one room without interference from each other s remote controls Each TV and a Guest remote control can be set to match MyChoice Off Disables MyChoice function On Enables MyChoice function ON Credit MyChoice works with MyChoice scratch cards and MyChoice Credits ThemeTV OFF Disables ThemeTV ON Enables ThemeTV Startup Will show the ThemeTV screen at startup SmartPay Enable or disable SmartPay 25 Hotel information TTV1 Name Control settings TTV2 Name Clock setup TTV3 Name Spea
33. t to search channels now This can take a few minutes The options from the Settings menu are Frequency scan Quick Network frequency m Advanced Symbol rate mode Full Analogue channel Free scrambled Reset Frequency scan Automatic Network frequenc Manual Symbol rate mode Analogue channel Free scrambled Reset Frequency scan Automatic Network frequency m Manual Symbol rate mode Analogue channel Free scrambled Reset Frequency scan Network frequency m Symbol rate mode Analogue channel Free scrambled Reset Frequency scan Free channels Network frequency m Free scrambi Symbol rate mode Analogue channel _ Free scrambled Reset Frequency scan Network frequency m Symbol rate mode Analogue channel Free scrambled The Frequency scan contains three options Quick this is a fast method to search channels but it might skip some channels depending on the network Full the scan will search on all frequencies and will store all channels available This is the safe method if you don t know the network parameters but it takes more time Advanced If you know the network parameters like Network ID Network Frequency you can use this option otherwise the safe option is to use the Full option The Network frequency options are Automatic and Manual If you do not know the correct values for this option please use the Automatic option
34. ter power down you can remove the USB key and power on the TV to check the result of the cloning and correct functionality of TV e q Welcome message welcome logo hotel info starting channel startup volume Instant initial cloning and software upgrade For instant initial cloning and software upgrade the files on the USB key should be a TPM1012HE_CloneData folder b PHILIPS _2K13_ TKS nSVT_BUH_DL upgrade_loader pkg Steps to follow for a new TV F USB gt c Mount the TV in place d Insert the USB key on the side USB port e Plug inthe mains power cord d TPM1012HE_CloneData File folder f Power on the TV a software upgrading in progress CY apai kaa ee message will appear The TV will reboot and display the installation wizard after 3 second the message Instant initial cloning will appear TV will reboot again to apply settings You can then remove the USB key You are now done The TV has the last software version installed and all settings cloned from the master TV Burn New folder Name Type 28 PHILIPS 9 Feature settings Multi RC This function allows that up to four televisions can be installed in a room whereas every TV will listen to its own RC Once the TV is set also every RC can be set to remember its connected TV Off This function is not used all TVs will listen to a blue RC TVO The TV will listen to a O RC Press and hold both the menu and number O button
35. tion le USB to TV Display information Info key enable W y Local KB lock RC lock OSD display High security Auto scart HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle RC lock OSD display High security Auto scart HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle Hotel Information The settings from this submenu will allow you to setup the pictures for the hotel information Display information On Enables hotel information to be available in the guest menu Off Disables hotel information to be available in the guest menu Info key enable Enables the possibility to see Hotel Info by pressing the Info button on the remote control USB to TV This option uploads the pictures used for Hotel Info in to the TV You should only use this when configuring the master TV You can then clone the settings to another TV Note All pictures used for Hotel Info will be cloned Control Settings The settings from this submenu will provide access to the functionality of the TV Local KB lock Off The local keyboard control buttons on the TV are enabled On The local keyboard control buttons on the TV are disabled power button still enabled All All local keyboard control buttons on the TV are disabled 20 Professional settings Switch on settings Welcome message Professional settings Switch on settings
36. ugged in the Multimedia menu will not appear automatically but users can access Multimedia menu from the Consumer menu by selecting Browse USB On When a USB device is plugged in the Multimedia menu appears automatically 21 Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Switch on settings Welcome message Welcome logo installation MyChoice setup ThemeTV Configuration Professional settings Switch on setungs Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Professional settings Switch on settings Welcome message Welcome logo Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Switch on settings Welcome message Welcome logo Hotel information Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Local KB lock RC lock OSD display High security Auto scart HDMI CEC in USB break in i t Enable MHEG Enable EPG Enable subtitle Local KB lock RC lock OSD display High security Auto scart HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle Local KB lock RC lock OSD display High security Auto scart HDMI CEC in USB break in
37. uto channel update 8 BBC 1 London Auto software update 9 BBC 1 West 10 BBC 2 England Multi remote control 11 CBeebies MyChoice 12 SVT1ABC ThemeTV 0 13 SVT2ABC SmartPay 14 SVTBYSVT24 15 TV3 Sverige 16 ABC Dig Music 17 ABC hz Skip scrambled signals Speaker settings Submenu with speaker settings TV speaker enable Off Disables the TV Main speakers The headphone output is not affected by this setting On Enables the TV Main speakers Independent main speakers Off The volume on the Guest remote control will affect both the TV Main speaker and the headphone volume On The volume on the Guest remote control will affect both the TV Main speaker and the headphone volume After pressing MUTE the volume on the Guest remote control will not reactivate the TV Main speaker volume but will only control the headphone volume Default main speaker volume Set the default volume level for TV Main speaker after Unmuting Note This option is only visible if Independent Main speaker mute is set to On Installation Blank channel The Blank channel function disables the display of video on the TV but does not affect the audio output Select or deselect can be done by pressing OK button on the remote control Note The channels marked with X will not display video on the TV 24 Hotel information Control settings Clock setup Speaker settings
38. want to stay in the Professional settings menu or continue USB to TV 16 Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTY Configuration Professional settings Switch on settings Welcome message Welcome logo Hote information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTY Configuration Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup Professional settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTV Configuration Professional settings Welcome message Welcome logo Hote information Control settings Clock setup Speaker semings Installation MyChoice setup ThemeTV Configuration Professional settings Switch on settings Welcome message Welcome logo Hotel information Control settings Clock setup Speaker settings Installation MyChoice setup ThemeTY Configuration Smart power Professional mode Room ID Consumer setup Channel setup USB to TV RF to TV Reset Professional mode Room ID Consumer setup Channel setup USB to TV TV to USB RET Reset Professional mode Room ID Consumer setup Channel setup
39. y Auto scart HDMI CEC in USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle On Power on scart RC lock OFF All buttons on the Guest remote control will function normally On All buttons on the Guest remote control are disabled Master remote control 22AV8573 yellow or RC2573 green commands are not affected by this setting OSD display Set this function to show or hide on screen information Off On screen information is suppressed On Normal on screen information is displayed High security Off Professional setup menu can be accessed by both Guest remote control and Master remote control 22AV8573 yellow or RC2573 green Guest remote control access to set up menu is only possible with code 3 1 9 7 5 3 mute On Professional setup menu can only be accessed by the Master remote control 22AV8573 yellow or RC2573 green Auto scart Enables auto scart switching or break in in Professional mode On Enables auto scart switching or break in Power On Scart Enables auto TV start On Off when detecting scart break in never use this feature without a connected STB Off Disables auto scart switching or break in HDMI CEC in Off Disables HDMI CEC feature On Enables HDMI CEC feature Philips Easylink HDMI CEC enables one touch play and one touch standby between HDMI CEC compliant devices USB break in Off When a USB device is pl
40. zard will start to guide you through the process of setting the sound and picture on the TV set 10 Select Continue to start the wizard and press the OK on remote control You can set the TV to your personal preferences Press Continue The wizard will ask you some questions about which image you prefer select the option you desire and press OK on the remote control Use the left right cursor to adjust brightness To confirm press the OK key Once this wizard is done you will return to the installation menu again i a The TV has stored your preferred settings The last option in this menu is Add your devices This can be done if you would like to add a DVD player or STB TV Channels Installed Optimize TV picture and Add pour devices sound When you are done with this select Done and press OK on the remote control 11 PHILIPS After pressing Done you have completed the installation of the TV and you should see this screen Press OK on the remote control to exit this wizard Note This wizard will not be available anymore when you start the TV the next time The only way to re use this wizard is to reinstall the TV set We recommend that you register your TV at www philips com welcome Get free TV software updates convenient tips and tricks and other relevant product information Press OK to complete the installation and access the Home menu
Download Pdf Manuals
Related Search