Home

Panasonic NV-VHD1EC DVD VCR Combo User Manual

1. i for example Video Camcorder ca L to the front input To select A3 press Taegan TL xy OT INPUT SELECT AV 00 repeatedly The sound will be recorded on r L the HiFi audio tracks and the mono audio track To record only mono use L audio input Video Audio L R 11 Connecting External Equipment Connecting with Audio Video cable Connect the Audio Video cable white L red R yellow video according to the colours markings of the terminals VCR DVD CLASS 1 pour LASER PRODUCT cies OPTICAL SVIDEO R O AUDIO VIDEO LO U i ae Yellow Video Home Theatre Audio Video cable or TV set not supplied not supplied If your TV is supporting RGB then connect a 21 pin scart lead with AV1 TV to reach the best picture quality for DVD playback For RGB setting see page 18 Analogue recording You can record to a Mini Disc MD or audio cassette or connect to a Dolby Pro Logic amplifier Connecting with Optical digital audio lead VCR DVD DVD OUT fecripvp our DIGITAL AUDIO P OMIBITSTREANM mk ip en r M IRF out TEELEATED SUB IECODERI ELA OECO ELENE CLASS 1 ACIN u OPTICAL SVEO RO DR Optical digital audio lead notsupplied Digital amplifiers with a built in decoder or a decoder amplifier combination Mini Disc or C
2. VCR i On Screen Display VCR Ch 36 RQTD0035 A WN S E Setting up Set up the connections shown here and connect the mains lead supplied to your AC IN e The RF radio frequency coaxial lead must be connected for TV reception AC IN even if the video recorder is already connected with a 21 pin scart lead e For more information about the remote control buttons and cursors see pages 4 5 g Automatic Setting without Q Link Pree om e Set the remote control to VCR gey supplied e Switch on the unit and the Country setting menu will appear e Use the cursors A Y lt on the remote control to select your country e After pressing ENTER all the TV stations which can be received will be tuned automatically in about 5 minutes e Ifthe menu Clock setting appears use the cursors A Y a or the numeric buttons on the remote control to set the Time and Date manually e To end this procedure press ENTER e To cancel this settings press EXIT Note If the selection for the Country menu does not appear after switching on the unit you can restart the automatic setting see page 10 An incorrect setting of time or date observe summer and wintertime will influence the timer recording Automatic Setting with Q Link If your TV is equipped with Q Link or with a similar function from other manufacturers see note the TV programme positions can be downloaded with a fully wired 21 pin scart lead not supplied
3. The programme positions must be tuned on the TV first e Connect the scart lead e Set the AV channel of the TV e Set the remote control to VCR ree e Switch on the unit e Downloading of the TV data starts e When the channel indication stops flashing on the VCR display the downloading is complete Note about Qin The following systems from other manufacturers have a similar function to Q Link from Panasonic List of registered trademarks Q Link Panasonic DATALOGIC Metz Easy Link Philips Megalogic Grundig SMARTLINK Sony Manual download start e Set the AV channel of the TV e Set the remote control to VCR vee e Press MENU e Select Tuning v e Access by pressing ENTER e Select Download y e Press ENTER e Confirm by pressing ENTER e When the channel indication stops flashing on the VCR display the downloading is complete Connect the TV only with a RF coaxial lead You must ensure that the video output channel is adjusted to the input channel of the TV Please also read the operating instructions for your TV e Set the remote control to VCR ree e Switch on the unit e Press MENU for about 7 seconds until the number of the channel appears on the VCR display The pre setting is channel 36 NV VHD1 EC 38 NV VHD1 EE e Tune the TV until the test screen appears A distorted picture on the channel can be reduced by adjusting the unit and the TV to another channel e Use the CH button or the nu
4. Panasonic Operating Instructions DVD Player Video Cassette Recorder Contents Page DVD CD Player with MP3 and Hi Fi Video Cassette Recorder Warning and Precautions 2 NV VHD1EC 9 NV VHD1EE Setting up 3 VCR DVD Controls 4 VCR DVD Operations 5 VCR Recording 6 VCR Playback VCR Functions 8 VCR Tuning 10 Connecting External Equipment 11 VHS SUPERDRIVE SHOWVIEW QO Bye DVD Easy Setup 13 DVD Operation 14 DVD Playback 15 DVD Settings 17 DVD OSD Menu 19 Information about the player 20 _____ Accessories Information about the VCR 21 oo O Remote Control eece EURZE1SKA0 Troubleshooting 22 ooog Sp 0608 O AC Mains lead soomi ROSI Language codes 23 ooee Remote Control codes pestis O RF lead o a VJA0728 A JE Index Specifications 24 aon O Remote Control Batteries eS AA UMS or R6 Bet nak hg Please read through all these operating instructions 222e especially the safety information before connecting or operating this unit or adjusting any settings a A OSD On Screen Display VCR Video Cassette Recorder TV Television RQTD0035 A Warnings and Precautions DANGER VISIBLE AND INVISIBLE LASER RADIATONWHEN OPEN n oon e This unitis intended for use in moderate climates CAUTION NOID EXPOSURE TO BEAM o on AEN izosoaas 1 e Please observe copyright laws when recording sound tracks and film ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE
5. Store by pressing ENTER Main menu Other settings 112 Tape length SOB puro Press EXIT SQPB settings AUTO VCR automatically recognises types of recordings ON Only S VHS S VHS ET recordings should be played OFF Only VHS recordings should be played Note Distorted pictures during these playback function are not functional faults Pry Setting the Brightness Timer recording of the VCR display in standby mode Tuning e Press MENU Sock setting e Select Other settings Y e Access by pressing ENTER os e Select VCR display e Select the input field gt e Select the settings AY e Store by pressing ENTER VoRdepey L e Press EXIT Adjust the Brightness of the VCR display ON The VCR display is brightly illuminated DIMMED The VCR display is dimmed OFF The VCR display is not illuminated Main menu Other settings Tape length AUTO lt E 240 Audio playback NORMAL SQPB AUTO gea Output control Not for DVD OUT 3 e Press MENU Tang e Select Other settings Y clock HA e Access by pressing ENTER a Select VCR DVD OUTPUT v CRC ea Select the input field gt AUTO 4E 240 Selectthe settings AV e Store by pressing ENTER e Press EXIT Main menu Tape length Audio playback NORMAL SQPB AUTO Q VCRIDVDOUTPUT MAN AUTO Ifa button is pressed the outputis connected automatically to corresponding part of the unit Forexample while watchinga D
6. e Resume normal playback by pressing Playback gt gt Fast Forward and Forward Search Fast Rewind and Backward Search To select Fast Forward or Fast Rewind press these buttons when the video has stopped To briefly watch the picture during Fast Forward or Fast Rewind hold down the corresponding button To search press these buttons briefly during playback and the search will continue until Playback gt is pressed Two times pressing increases search speed JET SEARCH e Ifyou keep this button pressed the search function will continue until you release the button VHS Index Search Function see page 8 Remove the cassette Press the EJECT button on the unit or press Stop C for more than 3 seconds on the remote control Change the Sound mode Press this button repeatedly Stereo sound OSD Display L R Left channel OSD Display L Right channel OSD Display R Mono sound OSD Display Display time Tape counter or Remaining tape time Press this button repeatedly Select the VCR channel and adjust the tracking see page 23 Reset the Tape counter Press this button When inserting a cassette the counter is reset to 0 00 00 AV Link Function see page 11 Select the channel or the ShowView number Use the numeric buttons Example 18 Display the Main menu VCR Timer Recording Function see page 7 VCR Recording Functions see page 6 VCR Timer Recording Functions see page 6 7
7. BASS PLUS ON to boost the output from the subwoofer see page 17 e Adjust the volume of the subwoofer to suit your preference Note e Ifyou connect an amplifier with Dolby Pro Logic decoder you will also need to connect center and surround speakers to enjoy surround sound e The Dolby Pro Logic decoder will not function correctly if A SRD ADVANCED SURROUND and BASS PLUS is on Turn A SRD and BASS PLUS off Change of initial settings PCM Down Yes conversion No connected an amplifier with an optical digital audio lead connected an amplifier with audio leads Dolby Digital PCM connected an unit without a built in Dolby Digital decoder Bitstream connected an unit with a built in Dolby Digital decoder DTS Digital Off connected an unit without a built in DTS decoder Surround Bitstream connected an unit with a built in DTS decoder MPEG PCM connected an unit without a built in MPEG decoder Bitstream connected an unit with a built in MPEG decoder IMPORTANT If the equipment you connected cannot decode the signal the setting must be changed to default settings If not signals the equipment cannot process will be output by this unit causing high levels of noise which can damage your hearing and the speakers RQTDO035 A English Deutsch Fran ais Italiano Espa ol Svenska Nederlands Portugu s CSGZENES toselect EWE to access Please select your TV
8. Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto Rom 8277 Urdu 8582 Corsican 6779 Kannada 7578 Romanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volap k 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic7168 Wolof 8779 English 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 Esperanto 6979 Laotian 7679 Serbo Croat 8372 Yiddish 1473 Estonia 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian 7686 Sindhi 8368 Zulu 9085 Remote Control codes This remote control setting allows you to operate many functions of TVs from different brands Ifthe TV cannot be operated properly enter the other code listed If itis still not working try other buttons to operate your TV Please also read the operating instructions for your TV e While keeping button pressed set the two digits code Brand Code Brand Code Brand Code Panasonic 01 04 44 ITT 25 SALORA 26 AIWA 35 JVC 1739 SAMSUNG 31 32 43 AKAI 27 30 LOEWE 07 SANSUI 05 31 33 BLAUPUNKT 09 METZ 28 31 SANYO 21 BRANDT 10 15 MITSUBISHI 06 19 20 SBR 06 BUSH 05 06 MIVAR 24 SCHNEIDER 05 06 29 31 CURTIS 31 NEC 36 SELECO 06 25 DESMET 05 31 33 NOKIA 25 27 SHARP 18 DUAL 05 06 NORDMENDE 10 SIEMENS 09 ELEMIS 31 ORION 37 SINUDYNE 05 06 33
9. TIMER to switch the VCR to Standby mode Synchronous recording DvD vcp CD MP3 To copy synchronous from the DVD VCD CD or MP3 to a VHS tape DvD VERII ITV e Switch the remote control to DVD e Set the beginning of the scene with Playback gt and Pause II gt e Switch the remote control to VCR kony i e Select the Disc channel dc by pressing AV e Set the beginning of the recording with C3 Playback gt and Pause II I e Press REC e Start the recording press Pause II I gt disc will start the playback synchronous Note Music or films with copy protection or with the NTSC format can not be recorded VCR Playback VCR Functions VCR display I gt ay oe ww wa 1 gt Panasonic VCR 112 Programme List Pos Name Date Start 01 2710 17 44 2 01 28 10 15 00 VCR Playback e When a cassette is inserted the VCR switches on automatically e When a cassette without an erasure prevention tab is inserted the VCR will automatically start playback e The cassette will automatically rewind when the tape end is reached e The CVC System Crystal View Control ensures optimum picture quality Normal Playback e Press this button to start Playback Stop Playback e Press this button to stop winding a tape or to stop recording Still Playback e Press this button during playback e Resume normal playback by pressing this button again or Playback gt Slow Playback e Keep this but
10. The following information appears on the VCR display SP standard recording time optimum picture quality LP double recording time slightly reduced picture quality EP SUPER LP triple recording time slightly reduced picture quality Note Distorted pictures produced when playing back some cassettes e g type E300 after LP or EP recordings are not functional faults Timer recording with On Screen Menu With the On Screen Menu you can programme Timer recordings up to 16 programmes Switch on and set the TV to the video output channel and insert a cassette with an intact erasure prevention tab into the VCR Switch the remote control to VCR te e Press PROG CHECK to display Timer recording menu and press ENTER e Setthe channel Pos You can use the cursors A Y lt on the remote control to move around the menu in order to make changes e Set the recording Date day or week For example Sa means that the programme will be recorded every Saturday or Mo Sa means that the programme will be recorded every day from Monday to Saturday e Set the Start time If you keep this button pressed down ay the time will change in 30 minute jumps Setthe Stop time e Set the Tape Speed SP LP EP or A automatic e Inthe setting A automatic the VCR automatically switches with a short picture distortion to the slow tape speed LP to record the programme as long as possible ifthe remaining tape time is no
11. 8 Stop 5 Bitstream 12 18 20 INPUT SELECT 4 11 POSITION MEMORY 16 Subtitles Subtitle language 17 18 19 Brightness of VCR display 9 Intro Jet Scan 8 21 PROG CHECK 6 7 SUBWOOFER 12 17 19 CANCEL 4 5 7 15 17 TIMER INTELLIGENT TIMER 7 21 Programme List 8 SUPER LP EP 6 7 21 Channel 3 10 JET SEARCH 5 Programme playback 15 S VIDEO 12 CHAPTER Chapter review 15 16 19 20 Language codes 23 Progress Indicator 19 Synchronous recording 7 Child lock 8 13 17 18 23 Language setting 9 QLink 3 6 21 Tape counter 5 CINEMA 17 Laser 2 Random playback 15 Tape length setting 9 Clock 3 9 Letterbox 13 18 20 REC REC OTR Recording 6 7 Tape Speed 6 Country 3 LP AUTO LP 6 7 21 Receiver 11 TITLE 16 19 20 CVC 8 MENU 5 REC CHECK 5 TIMER Timer recording 6 7 DATE 3 9 enu Operation 4 Remaining tape time REMAIN 5 6 7 TOP MENU 15 Decoder 11 ESECAM 9 Remote control 2 4 5 9 23 TRACKING V LOCK 23 Delete 10 ono sound 5 10 Repeat Playback 8 16 TV ASPECT 5 DIALOGUE ENHANCER 17 19 Move 10 REPLAY 4 16 TV Operation 4 Digital Audio output 12 P3 menu 15 RESET 5 VCR DVD OUTPUT 49 Digital recording 12 PEG 12 13 18 Restart Automatic settings 10 VCR display 9 DIMMED 9 NICAM sound 10 Resume function 16 VCR Operation 5 DIRECT TV REC 6 NTSC 8 18 21 RETURN 5 Volume 4 DISPLAY 5 6 9 18 OFF 6 RF coaxial lead 3 VPS 6 21 Disposal 2 ON 6 RGB 12 18 Warning 2 Dolby Digital 12 13 18 20 On Screen Displays OSD Menu 9 18 19 23 Safety 2 ZOOM 18 DTS Digital Surround 12 13 18 20 ONE TOUCH MEMORY 17 S
12. Dynamic range audio more than 90 dB Hi Fi sound tracks DVD Dynamic range audio DVD linear audio 96 dB CD audio 96 dB Total harmonic distortion CD audio 0 0025 S N ratio 115dB VCR Audio frequency response 20 Hz to 20 kHz Hi Fi sound tracks DVD frequency response linear audio 4 Hz to 22 kHz 48 kHz sampling 4 Hz to 44 kHz 96 kHz sampling CD audio 4 Hz to 20 kHz DVD Optical digital output Optical terminal Laser Pick up Wave length 658 nm 790 nm Laser power Class 2 Class 1 Norwegian B lgelengde 658 nm 790 nm Laser styrke Class 2 Class 1 Ingen farlig str lning sendes ut med sikkerhets beskyttelse Operating temperature humidity 5 C to 35 C 35 80 relative humidity Weight and Dimensions Approximate value 5 2 kg 430 width x 89 height x 345 mm depth F29E02 0 These specifications are subject to change without notice ENG RQTD0035 A
13. EN CAS D OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU PoVARSe ie easton sats NE Caution VARO CASERSATENSLLE ALA KATSO SATEESEEN ON e Do not install or place this unit in a bookcase built in cabinet or in another confined space Ensure the FARR SIND RETRAITA EJ TRALERNI NAR DENNA DEL unit is well ventilated To prevent risk of electric shock or fire hazard due to overheating ensure that p 9 ADVARSEL INGA EKSPONERING FOR STAALEN on NS curtains and any other materials do not obstruct the ventilation vents VORSICHT GEgemNET MICHT DEM STRAE AUSSETZEN e Do not obstruct the unit s ventilation openings with newspapers tablecloths curtains and similar items EE HANAN RAR NAHE eR RA tE ICEMS COMRUF TROL F HOUES LEBRA MNKULEUTC KEU RQLS0233 e Dispose of batteries in an environmentally friendly manner Batteries packaging and old equipment should not be disposed of as domestic waste but in accordance with the applicable regulations 8 e Do not remove outer cover to prevent electric shock There are no user serviceable parts inside Refer all servicing to qualified service personnel e Only transport and set up this equipment in a horizontal position and do not place anything heavy on it e Only connect leads when all the parts of this equipment the TV and other equipment are switched off e Only clean the outside of this equipment using a soft cloth and no cleaning fluid e The mains lead must not be used for other equip
14. ENHANCER ON on Digital OPTICAL output only with PCM Signal e DIALOGUE ENHANCER OFF Factory preset Recalling your settings with one button DVD VCD CD This feature allows the settings that you made for ADVANCED SURROUND BASS CINEMA and DIALOGUE ENHANCER to be stored and recalled with just one button press e Storing the settings in memory Press and hold the button ONE TOUCH MEMORY until MEMORY ON onthe display appears The settings remain in the memory even if you turn the unit off e To cancel Press the button ONE TOUCH MEMORY to set the factory preset MEMORY OFF appears in the display e Recalling the settings Press the button ONE TOUCH MEMORY MEMORY ON appears in the display Basic operation Press SETUP the SETUP screen appears e Select the SETUP menu AY e Select the setting you want to change AV e Select and change the setting AV e Press ENTER to confirm Press SETUP or RETURN to exit the screen Subtitles DVD Press SUBTITLE during playback The language changes each time you press the button or AV To switch subtitle display off select OFF see page 18 19 Child lock password DVD oniy for DVD VIDEO discs available Press SET UP select Menu list gt select Settings gt Select Child lock gt Y Settings gt Select On AV Input your 4 digit password if you enter a wrong number press CANCEL Press ENTER to store the password e Press SETUP to exit
15. FERGUSON 10 PHILIPS 05 06 SONY 08 GOLDSTAR LG 31 PHONOLA 31 33 TELEFUNKEN 10 14 GOODMANS 05 06 31 PIONEER 38 THOMSON 10 15 GRUNDIG 09 PYE 05 06 TOSHIBA 16 HITACHI 22 23 31 40 42 RADIOLA 05 06 WHITE WESTING INNO HIT 34 SABA 10 HOUSE 05 06 IRRADIO 30 Note If your Panasonic TV can be operated with Code 44 the remote control can operate some additional TV functions with the buttons EA red green yellow HOB blue VCRI for example select the Panasonic TV input with Cc INPUT SELECT AV and the A B C or D button 23 Index Page Page Page Page A B repeat play 16 Dynamic range 18 20 OPEN CLOSE 5 SET UP 18 Add 10 EASY SETUP 13 Optical digital audio lead 12 13 20 Shipping condition 10 ADVANCED SURROUND 17 19 EJECT 5 Password 13 ShowView 7 21 Aerial 3 EP SUPER LP 6 7 PAL 60 18 SKIP 16 Analogue recording 12 Erasure prevention 8 Pan amp Scan 13 18 20 Slow playback 5 ANGLE 19 EXIT 4 PBC Play Back Control 16 20 Slow motion playback 14 AUDIO 5 19 EXT LINK 11 21 PCM Down conversion 12 18 Sound system 10 Automatic Setting 3 Fast Forward Fast Rewind 5 14 PDC 6 21 Soundtrack language 18 AV input AV Output Scart 3 11 12 18 Field 18 20 Picture distorted 3 23 sp 6 7 AV LINK 11 Frame 18 20 Playback 5 8 14 15 20 SQPB S VHS Quasi Playback 9 21 BASS PLUS 17 19 Frame by frame viewing 14 PLAY MODE 15 Still mode Still playback 5 18 Batteries 2 INDEX VHS Index Search System 8 Playback Off Timer
16. RG FOR AT GARDINER ELLER LIGNENDE IKKE FORVERRER VENTILASJONSFORHOLDENE S RISIKO FOR ELEKTRISK SJOKK ELLER BRANN FOR RSAKET AV OVERHETING UNNG S APPARATETS VENTILASJONSAPNINGER MA IKKE DEKKES TIL MED AVISER BORDUKKER GARDINER OG LIGNENDE PLASSER IKKE APEN ILD SLIK SOM LEVENDE LYS OPPA APPARATET BRUKTE BATTERIER M KASSERES UTEN FARE FOR MILJ ET DETTE PRODUKTET ANVENDER EN LASER BETJENING AV KONTROLLER JUSTERINGER ELLER ANDRE INNGREP ENN DE SOM ER BESKREVENT DENNE BRUKSANVISNING KAN F RE TIL FARLIG BESTRALING DEKSLER MA IKKE PNES OG FORS K ALDRI A REPARERE APPARATET P EGENH ND ALT SERVICE OG REPARASJONSARBEID M UTF RES AV KVALIFISERT PERSONELL 2 DETTE APPARATET ER BEREGNET TIL BRUK UNDER MODERATE KLIMAFORHOLD RQTD0035 A 21 pin scart lead not supplied VCR DVD Aerial not supplied WV oe RF coaxial lead supplied E On Screen Display Panasonic VCR Country Belgien Deutschland Belgique Osterreich Belgi Portugal Panasonic VCR Clock setting Clock setting MAN Time 20 30 24 Date 21 03 01 Panasonic VCR Download Download in progress please wait Position 49 VCR display Panasonic VCR Main menu Timer recording Tuning Clock setting Other settings Panasonic VCR Manual Auto Setup Restart Download Shipping condition VCR DVD rae Der lt TV RF Coaxial lead supplied L
17. Scan style if the disc supports this format Expands the picture to fill the screen from top to bottom without distortion However the edges of the picture are cut off Letterbox Ifyou have a regular television 4 3 format and wish to view 16 9 software in the Letterbox style The whole picture is displayed but black bands appear top and bottom of the screen OPTICAL optical output Ifyou have connected the player with an Optical digital audio lead to a digital amplifier or an amplifier with abuilt in decoder to the OPTICAL output select Yes If you have selected No above the next setting is Child lock password DTS Digital Theater Systems Method of coding multi channel audio signals Realistic sound effects are possible Select Yes when you connect the player to a unit with built in DTS decoder Dolby Digital Method of coding and compression of more channel audio signals developed by Dolby Laboratories A large amount of audio information can be recorded on one disc Dolby Digital is used in many cinema digital television programmes DVDs and video games around the world Select Yes when you connect the player to a unit with a built in Dolby Digital decoder MPEG Select Yes when you connect the player to a unitwith a built in MPEG decoder Child lock password You can prevent the play back of DVDs when you enter a password Password Enter a 4 digit password 13 DVD Operation Reading disc informatio
18. VCR Timer Recording and Tape Speed Functions see page 6 7 VCR Programme List and Intro Jet Scan Function see page 8 DVD Operations POSITION MEMORY H SLOWISEARCH geca 60 ONETOUCH MEMORY TV ASPECT T INDEXISKIP a OPENZELOSE DISC QS lt 5 oO g FA S gt z ma 23 m z amp e 3 4 Bile 7 m Z PLAY MODE SETUP REC CHECK REPEAT A B REPEAT Hae oo VCR DVD Operations DVD display Playback indicated by gt FB me owe gt i I Restart from the memorized position Playback Stop Resume press button 1x omo mme cmap Playback Stop press button 2x indicated by O TITLE CHAP Fl M fs ji v Playback Pause indicated by II I gt yp Slow motion playback Keep this button pressed down while paused Ea e Slow playback forward gt Slow playback backward Resume normal playback by pressing TITLE or gt l Playback gt Forward Search TEVERE Backward Search a ADVANCED SURROUND AlSRD Playback if you are using 2 front speakers BASS PLUS If you connected a subwoofer Blass PICTURE Enhances detail in dark scenes DIALOGUE ENHANCER Increases the volume of the dialogue sound DLENH CINEMA Reselect or store this settings Skip chapters or tracks Remove the disc Press the OPEN CLOSE button on the unit or press Stop C for more than 3 seconds on the remote control Change audio soundtrack lan
19. VCR setting e Check which standard was used when the video cassette was recorded Setting of PAL or MESECAM can be adjusted manually see page 9 For more information about NTSC see page 8 The playback picture is distorted when you record the tape on EP mode using MESECAM system This is not a functional fault e We recommend PAL system for recording on EP mode If problems occur which you cannot deal with yourself 22 consult a service center see the Guarantee Information The remote control does not work correctly The signal from the remote control does not reach the unit s window or the distance is too long e Point the remote control in direction to the unit e Remove obstructions between the unit and the remote control its transmitting distance is about 7 metres The batteries in the remote control are exhausted or the batteries have not been inserted with the correct polarity Check the batteries and if necessary insert new batteries see page 2 No response when buttons are pressed e Check if the remote control is operating VCR1 or VCR2 by holding ENTER and pressing 1 or 2 see page 9 Some operations may be prohibited by the disc or tape The unit may not be operating properly due to lightning or static electricity e Press O I to switch the unit to standby mode disconnect the AC mains lead then reconnect it Condensation has formed e Wait 1 to 2 hours for it to evaporate Playback does not start even when Pla
20. With an Euro AV connection and with the Q Link function the VCR is able to communicate with the TV e copying automatically the tuning positions of the TV e after finishing the playback the VCR will switch automatically into Standby mode if you switch of the TV e one touch on DIRECT TV REC and the VCR will record the film you are watching on the TV e if you insert a tape into your VCR the TV in Standby mode will be switched automatically on External Link With External Link the timer recording from the Satellite or Digital Receiver is now very simple Set your programme in the receiver and switch your VCR with the External Link function into the Standby mode and in the stated time the recording will start automatically NTSC Playback In Europe colour system PAL is mainly used but some other country using NTSC colour format With the NTSC Playback function of the VCR you can watch a NTSC VHS tape for example from overseas on your PAL TV REC OTR When you want to record manually you can easily set the recording time to 30 60 120 180 or 240 minutes only by pressing the REC OTR button repeatedly The selected recording time will be displayed VPS PDC Some stations broadcasting this signal to control the start and stop time of a timer recorded programme The VCR can interpret this signal to record correctly the beginning and end of the film also if the broadcasting time is shifted for example if a live show is running longer than schedul
21. gt TITLE FOLDER OFF Note Repeat playback does not work if the elapsed playback time is not shown on the unit s display There is no mode for repeating the whole DVD Repeat of a Video CD VCD e Press Stop Oduring playback until PBC PLAY disappears from the display Enter the number of the desired track Press REPEAT to Exit Repeat mode press Stop O A B Repeat Playback DVD VCD CD MP3 You can repeat a section between points A and B within a title or track e Press A B REPEAT during playback e Press ENTER at the starting point A ee as ee e e Press ENTER at the finishing point B gt To cancel this function press A B REPEAT and wait until the is switched off The unit automatically determines the end ofa title track as point B when the end of the title track is reached Note A B repeat playback does not work if the elapsed playback time is not shown on the unit s display Resume function DVD VCD CD MP3 e Press Stop O during playback the unit remembers the position e Press Playback gt while symbol gt in the DVD display is flashing Playback restarts from the position you stopped it Cancel the Resume function e Press Stop O during playback e Press Stop O until disappears from the DVD s display Note The resume function does not work if the playback time is not displayed The position is cleared when the disc tray is opened or the unit is swi
22. or marked sections You can mark up to 5 scenes which you can select directly during playback to Makes possible to have a surround like effect if you are using teas fifi ADVANCED SURROUND only 2 front speakers Turn Advanced Surround off if it causes NORMAL 1 distortion BASS PLUS ON When you have connected an active subwoofer E DIALOGUE ENHANCER OFF Makes the dialogue in movies easier to hear PICTURE NORMAL Normal Cinema User A COLOUR 0 Adjust the colour level to suit your preference CONTRAST 0 Adjust the contrast to suit your preference BRIGHTNESS 0 Adjust the brightness to suit your preference 4 Bar position selection Adjust the vertical position of OSD bar on the screen 19 Information about the player Bee DvP iis DIGITAL OUT aenaran DYD joe MPS DIGITAL AUDIO PLAYBA Do not use irregularly shaped discs such as heart shaped These can damage the unit Label must face upward 20 This product incorporates copyright protection technology that is protected by the method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corpor
23. the TIMER button see pages 6 7 e The VPS PDC function was used to set the recording but the Start time input was incorrect see page 6 7 Automatic Clock correction is not working correctly Clock setting is on manually MAN e Set clock to AUTO see page 9 There is no programme with clock signal available Set the clock manually see page 9 The picture or the sound is distorted The TV reception is not adjusted e Readjust the reception see page 3 The sound is distorted e Set the sound system see page 10 The tracking is not set correctly e Adjust the VCR tracking manually see page 23 Picture distortion can be caused by using E300 cassettes which were recorded with a slow tape speed LP or EP e You are advised not to use E300 cassettes The aerial lead or scart lead is not correctly connected or is defective e Check the connections aerial signal and leads replace leads if necessary Setting for SQPB S VHS Quasi Playback is not correct e Setting can be changed see page 9 The video heads are soiled or worn out e Please contact service center for assistance Head cleaning by a service center is not covered by warranty This product may receive radio interference caused by mobile telephones during use e In such interference is apparent please increase separation between the product and the mobile telephone The cassette is recorded in a tape speed colour or video standard which is not corresponding to the
24. type Normal 4 3 Widescreen 16 9 How do you wantthe widescreen picture displayed on the normal 4 3 TV Pan amp Scan style cutsides and fill screen Letterbox style bands topand bottom Do you have a unit connected tothe OPTICAL output No Yes Does the unit connected have a built in DTS decoder No Yes Does the unit connected have a built in Dolby Digital decoder No Yes Does the unit connected have a built in MPEG decoder No Yes Wouldyou like toseta child lock password now No Yes Please enter a 4 digit password RQTD0035 A DVD Easy Setup VCRIDVD e Select DVD output GD vere v e Switch remote control to DVD e Select desired language lt gt AV Press ENTER to confirm Press SETUP or RETURN to exit the screen Initial settings for the unit can be adjusted in a easy way in the shown succession Adjust the settings with the buttons on the remote control lt gt AY TV screen formats There are two types of TV format 4 3 or 16 9 The 16 9 format corresponds to Widescreen When you select Widescreen 16 9 the following setting Pan amp Scan Letterbox will be skipped Note This may not work with some discs Pan amp Scan Ifyou have a regular television 4 3 format and wish to view 16 9 software in the Pan amp
25. values You will have to set the initial settings by using EASY SETUP see page17 Remote control sliding cover If the sliding cover of the remote control becomes detached accidentally push the cover down until it clicks into position Zs ie eS RQTDO0035 A Language codes Abkhazian 6566 Fiji 7074 Lingala 7678 Singhalese 8373 Afar 6565 Finnish 7073 Lithunian 7684 Slovac 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 Malagasy 7771 Somali 8379 Ameharic 65 77 Galician 7176 Malay 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malayalam 7776 Sundanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara 6588 Greenlandic 7576 Marathi 7782 Tagalog 8476 Azerbaijani 6590 Guarani 7178 Moldavian 7779 Tajik 8471 Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque 6985 Hausa 7265 Nauru 7865 Tatar 8484 Bengali 6678 Hebrew 7387 Nepali 7869 Telugo 8469 Bhutani 6890 Hindi 7273 Norwegian 7879 Thai 8472 Bihari 6672 Hungarian 7285 Oriya 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Pashto 8083 Tigrinya 8473 Bulgarian 6671 Indonesian 7378 Persian 7065 Tonga 8479 Burmese 7789 Interlingua 7365 Polish 8076 Turkish 8482 Byelorussian6669 Irish 7165 Portuguese 8084 Turkmen 8475 Cambodian 7577 Italian 7384 Punjabi 8065 Twi 8487
26. D recorder not supplied I Insert fully with this side facing up e Select Yes in PCM Down conversion see page 18 e Adjust the settings to suit the equipment you have connected Note You cannotuse DTS Digital Surround decoders not suited to DVD You can record the digital signal directly onto an MD The recording equipment should handle a sampling frequency of 48 kHz 16 bit Change the settings in the SETUP menu AUDIO as follows PCM Down conversion Yes Dolby Digital PCM DTS Digital Surround Off MPEG PCM Note VCR audio signal is not connected to DVD OUT terminal 12 Connecting with S VIDEO lead The S VIDEO terminal achieves a more vivid picture than the VIDEO OUT terminal only DVD OUT VCR DVD DVD OUT vcripvp our CLASS 1 DIGITAL AUDIO PaWeITSTREAH VIDEO AUDIO VIDEO OL ihe SVIDEO R R 5 ACIN RFIN RF out S Video lead not supplied Stereo Audio lead not supplied White Audio L Red Audio R 21 pin scartlead not supplied You can choose the DVD picture by changing the TV channel Note Do not connect the unit through another video cassette recorder Connect directly to the TV otherwise the picture may not be displayed correctly due to the copy guard Connecting an Active subwoofer You can enjoy more powerful bass by connecting an active subwoofer e Turn the BASS function to
27. Ifmore than 8 programmes are stored the oldest data will be lost To delete recording data manually press CANCEL e To protect a programme press and the lock symbol e will appear To unlock a programme press lt a e To modify the data press ENTER andthe Timer recording menu will appear e Change the data A V lt gt e Press TIMER to switch the VCR to Standby mode for Timer recording For more information see page 6 Note These functions can be also used with the VCR buttons INTELLIGENT TIMER TIMER REC When Shipping condition Auto Setup Restart etc has been carried out Intelligent Timer data will be lost To use Intelligent Timer Function at least one timer recording has to be done Cancel Standby mode for Timer recording e Press TIMER and in the VCR display LY will disappear e Now you can playback a cassette or make a recording e After that you must press the button again to switch the VCR to the Standby mode for Timer recording Check the Timer recording e Press PROG CHECK to display the Timer recording menu e Press EXIT to quit the menu Delete or change a Timer recording e Press PROG CHECK to display the Timer recording menu e Use AY to select the entry to be changed press CANCEL to delete the Timer recording e Use AY to select the entry to be changed press ENTER change entry with A V lt gt e Press ENTER to store these changes e Press EXIT to quit the menu or press
28. Level AL E to access menu Soundtrack language English Subtitle language Automatic VIDEO DVD Menu language English G AUDIO DISPLAY DEMO EASYSET Child lock On Level A D E to input your personal 4 digit password to delete Panasonic DVD SETUP DISC Soundtrack language English Subtitle language Automatic VIDEO DVD Menu language English ADO G DISPLAY DEMO EASYSET RQTDO0035 A Child lock o Level A i DVD Settings ADVANCED SURROUND DVD Dolby Digital 2 channel or over only GA Makes it possible to have a surround like effect during playback if you are using 2 front speakers e ADVANCED SURROUND NORMAL 1 e ADVANCED SURROUND EMPHASIZED 2 e ADVANCED SURROUND OFF Factory preset Turn ADVANCED SURROUND off if it causes distortion BASS PLUS DVD VCD CD When you have connected an active subwoofer to the SUBWOOFER terminal on the rear of the unit e BASS PLUS ON Factory preset e BASS PLUS OFF PICTURE DVD VCD e CINEMA 1 Mellows images and enhances detail in dark scenes e CINEMA 2 Sharpens images and enhances detail in dark scenes e USER Separate settings for colour contrast and brightness e NORMAL Normal mode Factory preset DIALOGUE ENHANCER DVD Dolby Digital 3 channel or over only WOB Increase the volume and clarity of speech or dialogue during playback e DIALOGUE
29. No picture e Ensure that the equipment is connected properly e Ensure that the equipment is turned on e Ensure the television s video input setting is correct The picture shown on the television is not normal e Go to the VIDEO menu in the SETUP screen and change TV Aspect to suit your TV e Ensure that the unit is connected directly to the television and is not connected through a video cassette recorder Ensure the AV1 Output Scart selection is correct for the TV input RQTD0035 A Troubleshooting Adjusting the VCR Playback picture If the picture is distorted with Nose bars ane Ti noise bars press the TRACKING V LOCK button in the or direction during a Playback Still Playback or Slow Playback i For automatic adjustment press and at the same time e The tracking cannot be adjusted on certain cassettes e Thisis nota functional fault of the VCR The meaning of some VCR On Screen Displays Please use tape with unbroken recording tab The REC button or REC OTR button was pressed to record but the cassette s erasure prevention tab has been broken off e In order to record use a video cassette with an intact erasure prevention tab see page 8 This action is not possible before time and date are set The PROG CHECK button REC CHECK or ShowView button was pressed without a date and time being set on the VCR e Set the date and time see page 9 No timer programmes to be done The TIMER button was p
30. R Main menu Timer recording Tuning Clock setting Other settings Panasonic VCR Tuning Pos Name Ch 33 33 37 35 35 23 Panasonic VCR Tuning Pos Name Ch 33 A033 37 35 35 23 Delete Add Move cs O G 10 Panasonic VCR Setting a new Channel Add Delete Move Main menu Timer recording a Channel on the list EEIT e Press MENU Tuning Panasonic VCR e Select Tuning Y Manual e Access by pressing ENTER Auto Setup Restart e Access Manual by pressing ENTER e Search fora Channel position AW for rapid search keep the cursor button Panasonic VCR Main menu Timer recording pressed down Add between Channels Tuning using the J button Clock setting and add by pressing ENTER Tuning Panasonic VCR e Access by pressing ENTER hie Sale SE e Select the new Channel av Download Shipping condition e Store by pressing ENTER e Select Tuning menu by pressing MENU e Select the Channel to be deleted A Y e Select Delete by pressing the MAW button e Delete by pressing JENTER e Select the Channel to be moved A Y e Select Move by pressing the button e Move the Channel to the new position AV e Store this new position by pressing ENTER e Press EXIT Restart Automatic settings e Press MENU e Select Tuning v e Access by pressing ENTER e Select Auto Setup Restart w e Press ENTER e Confirm by pressing JENTER Restoring the original s
31. R TIME MENG to select to access VCD Povrenan g TRACK 1 2 nAg to select to access CD DA DOS eaw TRACK 1 2 AEE to select to access MP3 aD e Ee awm FOLDER 1 18 AEE to select to access RQTD0035 A DVD OSD Menu OSD screens are menus that contain information about the disc or unit These menus allow you to perform operations by changing this information Note For some DVD VIDEO discs certain settings are not allowed by disc Please use the DVD menu e Press DISPLAY during playback Progress Indicator TITLE 1 17 DVD VIDEO 00 00 45 00 04 07 OO Dolby Digital 2 CH 48 KHz CHAPTER 2 5 e Press DISPLAY the OSD menu appears If there are several titles tracks on a DVD VCD or CD TITLE TRACK use this menu item to select them If there are several chapters on a DVD use this menu item to CHAPTER select them Enter time for DVD to start from this position TIMES Sin For VCD CD switch REMAIN ELAPSED TIME L Ifthe DVD offers alternatives you can select from the other AUDIO soundtracks on the disc When subtitles are available in several languages SUBTITLE OFF you can select the language of choice Scenes which were filmed several times from different camera ANGLE 1 2 angles You can select this different angles REPEAT OFF Repeat of titles tracks chapters folders
32. Touse first VCR VCR2 To use second VCR To operate both of them adjust remote control e hold ENTER and press 1 to operate VCR1 e hold ENTER and press 2 to operate VCR2 Panasonic VCR Language setting Timer recording e Press IMENU Tuning e Select Other settings w Sis o e Access by pressing ENTER 9 e Select Language A e Select the input field gt Select the setting AV e Store by pressing ENTER e Press EXIT Main menu Panasonic VCR 212 Other settings Remote VCR1 Language English Country others RQTD0035 A VCR Functions Sy Setting of On Screen Displays OSD Timer recording e Press MENU ee e Select Other settings w Other settings e Access by pressing ENTER e Select OSD v e Select the input field gt Main menu Panasonic VCR 112 Other settings Tapelength AUTO 4E 240 Selectthe settings AY Sana Paypak ane e Store by pressing ENTER VCRIDVDOUTPUT AUTO e Press EXIT VCR display DIMMED OSD 43 4 3 displays are on the edge of the screen the displays are not visible during playback in 16 9 format 16 9 displays are on the edge of the screen in 16 9 format the displays are in the centre of the screen in 4 3 format OFF No On Screen Displays Games Setting of SQPB S VHS Quasi Playback Timer recording e Press MENU Lene i oe MES Other settings cee reer Select the input field gt e Select the settings AV AUTO 4E 240
33. VD the VCR playback buttonis pressed the output will switch to VCR picture MAN Itis necessary to switch manually with the VCR DVD OUTPUT button from DVD to VCR or vice versa Sore MESECAM setting AUTO lt E 240 Press MENU _ Select Other settings w e Access by pressing ENTER e Select TV system w Other settings Tape length Audio playback NORMAL SQPB AUTO VCRIDVDOUTPUT AUTO VCR display DIMMED aon e Select the input field gt TVsystem MESECAM e Set MESECAM AY e Store by pressing ENTER e Press EXIT 9 VCR Tuning Panasonic VCR Main menu Timer recording Tuning Clock setting Other settings Panasonic VCR Tuning Manual Auto Setup Restart Download Shipping condition Panasonic VCR Setting the sound system This system can receive transmissions which are broadcast with NICAM sound This is a sound system with two sound channels which broadcasts either stereo sound or two separate mono channels Main menu Timer recording Tuning Clock setting Other settings Panasonic VCR Tuning M I M1 and M2 Auto Setup Reatat e Press MENU Download Shipping condition e Select Tuning Y e Access by pressing ENTER Tuning panasonic TVOR e Access Manual by pressing ENTER Pos Name Ch e Selectthe channel AY 7 lt 2 e Access by pressing ENTER 3 NB 8 e Select Mono av e Select the input field gt Pos Name ARD e Se
34. VD display RQTDO0035 A VCR Recording Timer recording with ShowView Switch on and set the TV to the video output channel insert a cassette with an intact erasure prevention tab into the VCR and set the remote control to VCR operation e Press ShowView e Enter the ShowView number For correction use lt e To access Timer recording press ENTER e fthe channel name is not set automatically select the channel Pos aw and store with ENTER The name of channel will be saved To modify the Name see page 10 e Set the tape speed SP LP EP or A automatic e Check the remaining tape time e To store the programme press ENTER e To preset other recordings repeat the procedure e Press TIMER to switch the VCR to Standby mode Make sure that in the VCR display L appears SHOWVIEW is a trademark of Gemstar Development Corporation The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation Recording with Intelligent Timer Function To easily set the Timer for programmes often broadcasted on the same channel and time each day for example series the Intelligent Timer Function remembers the channel number along with the start and end times of the last 8 programmes that you have recorded using Timer recording e Press I TIMER e Toselect the programme AY e Press TIMER to switch the VCR to Standby mode for Timer recording If you want to modify the data first follow the next steps e
35. ages Player front display o SETUP D DISC DvD VCD Language codes see page 23 e Press SET UP to call up the menus of the DVD player Menu list Factory preset Settings Soundtrack language English 6978 Original Subtitle language Automatic Off DVD Menu language English 6978 Child lock Off On Level All 1 8 SETUP VIDEO pvp vp Menu list Factory preset Settings TV Aspect 4 3 Pan amp Scan 4 3 Letterbox 16 9 AV1 Output Scart Video RGB Still mode Automatic Field Frame NTSC Disc output PAL60 NTSC ZOOM Off On Use the Zoom function to expand widescreen pictures to fill more of the television screen only for DVD Video in 4 3 Letterbox style SETUP AUDIO pvp vep Menu list Factory preset Settings PCM Down conversion Yes No Dolby Digital PCM Bitstream DTS Digital Surround Off Bitstream MPEG Audio PCM Bitstream Dynamic range compr Off On only in the format Dolby Digital SETUP j DISPLAY Menu list Factory preset Settings Menu language English On screen messages On Off Player front display Bright Dimmed Auto SETUP 2 DEMO A demonstration of the unit s On Screen displays select Off or On Press any button to stop the DEMO mode SETUP Dey EASYSET see page 13 RQTD0035 A DVD VIDEO POC GosRuw TITLE 1 2 CHAPTE
36. another programme press SEARCH again the playback will stop and the Programme List will appear e Press EXIT to quit the menu Note If you have removed the cassette or the power supply was interrupted the Intro Jet Scan will be activated when pressing the SEARCH button VHS Index Search System To quickly find the beginning of a programme press forward INDEX gt gt I or press backward INDEX I lt This function only works on playback mode or in stop mode Depending on how many times you press these INDEX buttons up to a maximum of 20 times the VCR will search through the tape to find the start of the programme and will automatically start playback for each programme which is longer than 5 minutes For example if you press the INDEX button three times the VCR will search for the third programme To cancel the Index Search System press Stop O RQTD0035 A fiend Setting the Audio playback Timer recording e Press MENU Ga f e Select Other settings Y Other settings e Access by pressing ENTER e Select Audio playback w oT nT Sclectthe inputfield gt Tapelength AUTO E 240 Select the settings AY Audio ae e Store by pressing ENTER e Press EXIT For tapes recorded with audio dubbing function select MIX to hear the mono and Hi Fi audio track together While playback you can select the sound track with the AUDIO button Main menu NORMAL only original sound OSD LR only dubbing sound mo
37. atellite Receiver 11 DVD menus 15 OPTICAL 12 13 Scart 3 11 12 18 SEARCH 5 8 14 Specifications Power source 220 240 V AC 50 60 Hz Matsushita Electric Industrial Co Ltd Power consumption 28W in operation approx 7W in standby mode http www panasonic co jp global Controls multifunctional remote control VCR DVD and TV VCR DVD direct controls main functions Disc Playback functions DVD Video DVD R R4 7 CD Audio CD DA Video CD CD R CD RW CD DA Video CD formatted discs MP3 Video and Audio heads 4 heads video 2 heads Hi Fi VCR Recording system 2 rotary heads helical scanning system Tape speed Record and playback time SP 23 39 mm s 240 min LP 11 7 mm s 480min E240 cassette VCR Fast forward or fast rewind time approx 60 s E180 cassette Video TV Colour system VCR PAL 625 50 DVD PAL 625 50 PAL 525 60 NTSC Video input and output level Pin jack AV 1 0 V p p 75 Ohm DVD S video output Y output level 1 Vp p 75 Ohm C output level PAL 0 300 Vp p 75 Ohm NTSC 0 286 Vp p 75 Ohm Output connector S terminal DVD RGB video output RGB output level 0 7 Vp p 75 Ohm Output connector AV1 VCR RF modulated UHF channel 21 69 75 Ohm VCR Horizontal resolution more than 240 lines SP VCR Signal to noise ratio video more than 43 dB SP Audio Input level 0 5Vrms more than 10 kOhm Audio Output level VCR 0 5Vrms less than 1 kOhm DVD 2Vrms 1 kHz 0 dB Output connector Pin jack AV 2 ch L R Subwoofer VCR
38. ation Reverse engineering or disassembly is prohibited Region codes Region numbers are allocated to DVD players and software according to where they are sold You can playback DVD s if their region number is the same or includes the same number or is marked All Disc formats DVD Video DVD R R4 7 CD Audio CD DA Video CD CD R CD RW CD DA Video CD formatted discs Note It may not be able to playpack some CD R RW due to the condition of the recording DVD formats This unit includes a 2 channel Dolby Digital decoder Connect the analog outputs Left and Right to an external Dolby Surround Pro Logic decoder to enjoy 4 channel surround sound Left Center Right and Surround or connect the digital audio output of this unit to an external multi channel Dolby Digital decoder to enjoy programs in up to 5 1 channel surround sound Left Center Right Left Surround Right Surround Subwoofer Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbols are trademarks of Dolby Laboratories SURROUND Theater System Inc DVD Glossary Bitstream This is the digital form of multiple channel audio data before it is decoded into its various channels Dolby Digital A technology developed by Dolby Laboratories that allows audio mono up through 5 1 channels to be conveniently transmitted stored and reproduced in high fidelity Dolby Digital is used in many movie theatres digital telev
39. ect the AV channel INPUT SELECT AV if you wantto record a programme from scart AV1 AV2 front input A3 or Disc dc e Switch the remote control to VCR E e Press REC to start recording e Press Stop L to stop recording e Use Pause Il I gt to pause recording e Restart recording by pressing this button again To preserve the video heads the function will be switched off after 5 minutes Direct TV Recording The DIRECT TV REC button allows you to immediately start recording the same programme that you are viewing on the TV if your TV is equipped with Q Link or with a similar function from other manufacturers see page 3 and connected with a fully wired 21 pin scart lead not supplied OTR Function OTR One Touch Recording REC OTR To record for a specific length of time press this button on the VCR You can extend the recording time from 30 60 120 180 to 240 minutes by pressing the button repeatedly The selected length of recording time will appear on the VCR display To stop in advance press Stop O If you want to watch another TV programme at the same time as you are recording select the channel on the TV Tape Speed e Press DISPLAY until REMAIN on the VCR display appears e Press SP LP EP before recording in order to select the tape speed for the recording Make sure that the remaining time on the cassette is longer than the time set for recording otherwise the whole programme cannot be recorded
40. ed ShowView The ShowView numbers make it extremely easy to set the VCR for timer recording Only by typing the numeric code for example out of the TV magazine and the VCR will translate this number into the timer recording data After the data are confirmed by pressing the TIMER REC button the recording is already programmed 21 Troubleshooting The display is not illuminated The mains lead is not connected e Check the connection Safety devices are operating e Disconnect the unit from AC mains for one minute then check if the unit can be operated The VCR display is set to OFF e Settings can be changed see page 9 The display is illuminated but the unit cannot operate The unitis in Timer recording Standby mode e Cancel Standby mode by pressing the TIMER button The child lock is activated e Settings can be changed see page 8 Tape transport noise During JET SEARCH the tape transport noise will increase e This is not a functional fault The recording function does not work correctly The VCR display IEJ is flashing when you try to record e In order to record use a video cassette with an intact erasure prevention tab see page 8 The Programmed recording function does not work e The time and date must be set correctly see page 9 The VCR does not record even though the recording has been programmed e Set the start time and the time to stop recording correctly and set the VCR on Standby Recording by pressing
41. ed to inform that the unit cannot be operated To cancel the Child Lock Function press the same buttons until the display disappears If the power supply of the unit is disconnected the Child Lock Function is cancelled after about 60 minutes Playback Off Timer Function to stop Playback automatically To stop the playback after a preset time press Playback gt on the VCR for more than 3 seconds during playback You can extend the playback time from 30 60 120 180 to 240 minutes by pressing the button repeatedly To stop in advance press Stop L The selected length of playback time will appear on the VCR display Intro Jet Scan Function You can playback the beginning of each recording with the Intro Jet Scan Function Press the SEARCH button The VCR will rewind to the start of the tape and play with high speed for 10 seconds the beginning of each recording which is longer than 15 minutes Once you have found the recording press Playback gt gt To cancel the search function press the Stop O Note For more explanation of the SEARCH button see Programme List Programme List The List of the Timer recordings are stored if the recordings are longer than 15 minutes EP mode 25 minutes and the cassette was not removed e Press SEARCH to display the Programme List e Select the programme AY e By pressing the SEARCH button again the VCR will wind the tape to the selected programme and start to playback e fyou select
42. ess CANCEL button e Select lt PLAYLIST e Press ENTER now begins in the programmed sequence Exiting programme mode e Press Stop O to Exit programme mode press Playback gt to continue programme e Press Stop O e Select lt PLAYLIST Press EXIT the programme is retained in memory Note The programme is cleared when the unit is turned off or the disc tray is opened Clear the PLAYLIST Press PLAY MODE while stopped Select lt Y CLEAR LIST Press ENTER e Press EXIT RANDOM playback Press PLAY MODE while stopped Select lt lt Y RANDOM e Press ENTER to exit RANDOM mode press two times Stop O Chapter review DVD e PressP for 5 sec during playback of a DVD The beginning of each chapter starts for some seconds Playback starts from the point where you stopped Note Chapter Review feature works only within a title DVD menus DVD s can have several menus The menu is displayed when you press TOP MENU may be different from the menu displayed when you press MENUJ Note The function of these buttons is different for every disc Read the disc s instructions for further details about operation 15 DVD Playback Repeat Playback DVD VCD CD MP3 Press REPEAT during playback The display changes as illustrated DVD e gt CHAPTER TITLE OFF Video CD amp TRACK DISC OFF ea Le a cine CD gt TRACK DISC OFF gt l MP3 e
43. ettings of the VCR Shipping condition e Press MENU e Select Tuning v e Access by pressing ENTER e Select Shipping condition w e Press ENTER e Confirm by pressing JENTER e Disconnect the unit from AC mains for one minute RQTD0035 A Connecting External Equipment Receiver not supplied Connecting a Receiver With some Satellite or Digital Receivers itis possible to start a Timer recording with a 21 pin scart lead not supplied by using EXT LINK function Please read the operating instructions for your Satellite or Digital Receiver for further information Panasonic VCR Controls for external recordings with a Satellite Receiver Main menu Timer recording Uae Clock setting e Press MENU Ernensetings e Select Other settings Y e Access by pressing ENTER e Select AV2 Y e Selectthe inputfield gt e Select the settings AV e Store by pressing ENTER Panasonic VCR 112 Other settings Tape length AUTO 4 E 240 Audio playback NORMAL SQPB AUTO VCRIDVDOUTPUT AUTO VCR display DIMMED 0 SD 43 e Press EXIT AV2 JEXT TV system PAL T After you have preset the recording in the Satellite Receiver set the VCR on Standby Recording by pressing EXT LINK on the this programme VCR As long as a video picture is being transmitted by the Satellite Receiver the VCR display VCR will record it This notice is displayed on the screen In order to delete this not
44. guage Press AUDIO during playback The soundtrack changes each time you press the button see page 19 Call up the OSD screens Call up the top menu of a disc Call up the menu of a disc Return from DVD SETUP menu to playback Select language of subtitles see page 17 Call up the PLAYLIST menu see page 15 Call up the DVD SETUP menu see page 18 REC CHECK Check the VCR recording status For a moment the Timer recording menu or an Info box appears on the OSD Not for DVD OUT see page 12 Repeat Playback see page 16 A B Repeat Playback see page 16 Note To preserve the video heads the following functions are switched off automatically after 5 10 minutes Forward Search Cue Backward Search Review Jet Search Still Playback Slow Playback Distorted pictures and tape transport noises during these functions are not functional faults RQTD0035 A VCR Recording VCR display VCR Display cvc On Screen Display Timer recording Pos Name Date Start Stop Timer recording Pos Name Date Start Stop SP l l a l F REMAIN toed Panasonic VCR 112 VPS PDC Panasonic VCR 112 VPS PDC 1 32 Mo Sa 13 30 14 00 LP ON 2 32 20 9 15 00 16 00 SP OFF 3 soje noisa e Switch on and setthe TV to the video output channel and insert a cassette with an intact erasure prevention tab into the VCR e Before recording selectthe channel with the CH button Sel
45. ice press ENTER To stop the recording press the EXT LINK button on the VCR Note The programmes to be recorded on your VCR should not overlap with the recordings of the Satellite Receiver i s CE SP He EXI EXT LINK2 To control external recording with some Satellite Receiver Videosignal EXT LINK1 Fora Digital Receiver which transmits a special control signal for recordings for example the F U N Receiver TU DSF31 EXT To connect an external equipment e g TV the EXT LINK button on the VCR is not activated DECODER Toconnect an external decoder RQTDO035 A WV pee supplied Connecting a Decoder With a 21 pin scart lead not supplied connect a Decoder to AV2 This device is used to decode scrambled broadcasts Pay TV poems Set the Channel to Decoder e Press MENU e Select Tuning Y e Access by pressing ENTER e Access Manual by pressing ENTER e Select the encoded channel AV e Access by pressing ENTER e Select Decoder Y e Select the input field gt e Select the Decoder to ON AY the picture in the background should become clear e Store change by pressing ENTER e Press EXIT AV LINK Function You can select the TV or video reception with the AV LINK button If video reception has been selected the VCR display will indicate VCR Tuning 33 33 124 34 PREMI 87 35 35 123 External source on AV3 Connect your external source
46. ision programs DVDs and video games around the world DTS Digital Surround This surround system is used in many movie theatres around the world There is good separation between the channels so realistic sound effects are possible Dynamic range Dynamic range is the difference between the lowest level of sound that can be heard above the noise of equipment and the highest level of sound before distortion occurs Field One frame is made up of 2 fields A regular television shows these fields one after the other to create frames Field still A field still is not blurred but it has only half the information of a frame still so picture quality is lower Frame Frames are the still pictures that go together to make a moving picture There are about 25 30 frames shown each second Frame still A still is shown when you pause a moving picture A frame still is made up of 2 alternating fields so the picture may appear blurred but overall quality is high Letterbox When a rectangular picture is displayed on a normal TV with black bands top and bottom Optical digital audio lead Electronic signals are converted to optical signals for output to an amplifier This reduces noise caused by electronic interference Pan amp Scan Expands a 16 9 widescreen picture to fill a 4 3 normal TV screen The edges of the picture are cut off but there are no black bands or distortion to the picture PCM pulse code modulation PCM is the digital method used
47. lectthe sound setting ON or OFF AY Channel 2 e Store by pressing ENTER Fre anag Aare e Press EXIT Select the setting Mono to ON if you want to record a normal mono sound on the Hi Fi tracks of the VCR for example if the stereo sound is distorted through the reception conditions Video system PAL Mono OFF Change the order of the Channel positions and the names of the TV station e Press MENU e Select Tuning Y e Access by pressing ENTER e Access Manual by pressing ENTER e Select the Channel to be changed AY e Access by pressing ENTER e Select the input field for POS gt e Input the Channel position av e Store the setting by pressing ENTER e Select Name w e Selectthe input field gt e Input the name of the TV station selecting the first letter AV e Select the next letter gt e Select the next letter av To input an empty character select the blank character between Z and e Store the setting by pressing ENTER e Press EXIT Note Distorted pictures you can adjust with Note Audio mode only for NV VHD1EE If there is no sound or if itis Fine tuning and Video system distorted you can try to adjust the Audio mode by selecting DK or BG To set generally the RFC system the same as TV system of the connected TV MENU Other settings w ENTER RFC system a select the input field gt select the setting av ENTER EXIT Panasonic VC
48. ment e Do not connect or handle the equipment with wet hands e Incase of rapid temperature changes do not operate this equipment for minimum of 1 hour e Donot place the unit on amplifiers or equipment that may become hot The heat can damage the unit Inside of product Produktets innside Norwegian e Do not place sources of naked flames such as lighted candles on the unit 3 CAUTION THIS PRODUCT UTILIZES A LASER USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL Warning To reduce the risk of fire electric shock or product damage do not expose this equipment to rain moisture dripping or splashing and that no objects filled with liquids such as vases shall be placed on the equipment This equipment the remote control the mains lead must not be used if itis damaged Protect them from e Direct sunlight heat cold rain wetness oil soiling and dust e Insertion of fingers or objects e Shock vibrations and mechanical stress do not bend the mains lead e Electric and magnetic fields e Lightning strikes during thunderstorms disconnect mains and aerial plugs Instructions for inserting remote control batteries e The lifetime of the battery is about 1 year depending on the frequenc
49. meric buttons to select the channel number e g channel 39 e Tune the TV until the test screen appears e To store this adjustment press ENTER e After that please continue with the Automatic Setting with the Country setting menu 3 VCR DVDControls_ o S OF C z TAPE DISC Cer n TIMER RECO EXTLINK v A REGIOTR E a EE A VCR display O ae DVD display Mi 7 The functions of these buttons can be operated by the remote control or directly on the unit In this description the remote control symbols are used in most cases ae TV Operations VCRIDVD TV VCRI G ITV To set the remote control code to operate the TV CD see page 23 DIRECT i REC TV ShowView REC CHECK TV REC Switch the TV on and off INPUT SELECT TRACNNOV OCK Select TV or AV channel 0 2 im Switch the screen format between CH O QO Te the wide screen and other formats AN VOLUME Q Sa Select the TV channel INPUT SELECT aa VOLUME Q 5 Operate the TV volume VCRIDVD REPLAY SLOW SEARCH emery General Operations Standby on switch NORD Press to switch the unit from on to standby mode SEARCH MENU X aa i or vice versa In standby mode the unit is still By consuming a small amount of power ENS g Menu Operation indicated by A V lt gt Bou These buttons are also used as curs
50. n please wait _ DVD TITLE CHAP VIDEO l l p l DvD TITLE CHAP DISC Screen display a Screen display 14 Playback atts e Switch remote control to DVD e Press VCR DVD OUTPUT to select DVD output e Press OPEN CLOSE on the unit e Place the disc on the disc tray e Press Playback gt and playback begins automatically Note The procedure of reading disc information s can take longer time Playback Pause DVD VCD CD Press Pause II I gt during playback e Press Playback gt restart of playback Playback Stop DVD VCD CD e Playback Stop Resume press 1x Stop O during playback e Playback Stop press 2x Stop O during playback Remove the disc Press the OPEN CLOSE button on the unit or press Stop for more than 3 seconds on the remote control Starting play from a selected track VCD CD While stopped enter a track number using the remote control Example To select track 18 by pressing the numeric buttons Playback starts from the selected track Note This may not work with some discs Frame by frame viewing DVD VCD While paused press lt 4 or gt on the remote control The frame changes each time you press the buttons The frames change in succession if you press and hold the button Pressing Pause II I gt also activates forward frame by frame Note You cannot move backwards frame by frame with VIDEO CD Slow moti
51. ng is ready If your remote control is not at hand you are also able to programme directly with the button on your VCR Easy Guide OSD The Easy Guide OSD is directing you directly step by step to the destination There is a big number of different individual settings and languages with a quick overview of all functions Super VHS Quasi Play Back SQPB You want to watch from time to time tapes which are recorded with an S VHS VCR No problem anymore This VCR can playback tapes in VHS quality which are recorded with the S VHS and S VHS ET format SUPER Long Play The Super Long play EP mode gives you the possibility to record three times longer than in Standard Play mode SP You can record up to 720 minutes 12 hours on a 240 minutes cassette AUTO Long Play Ifthe rest of the tape length is shorter than the needed tape time this VCR is supporting a recording mode that the VCR will automatically change from Standard Play SP to Long Play LP to complete the recording of the film Intro Jet Scan To check the content of the tape you can use the Search button to playback 10 seconds of every recording If you found the title simply press the Play button to watch the film Jet Rewind The Panasonic VCRs are equipped with a Jet Rewind Drive To rewind a E180 cassette it will take only 60 seconds For convenient winding and searching the tape transportation speeding up extremely fast and is stopping softly in very short time Q Link
52. no OSD MIX original sound and dubbing sound OSD LR only dubbing sound mono OSD need Tape length setting Timer recording e Press MENU Tuning e Select Other settings w ies a e Access by pressing ENTER or songs e Select the input field gt Panasonic VCR e Set Tape length AV e Store by pressing ENTER Main menu Other settings Tape length E 195 Audio playback NORMAL e Press EXIT SQPB AUTO Mainmenu S0 Clock setting If the broadcaster is providing the time signal T d tage si the Time and Date is set automatically Clock setting Clock setting is set on AUTO Other settings To set the time manually e Press MENU e Select Clock setting w e Access by pressing ENTER e Select MAN AV e Access by pressing ENTER e Setthe Time and Date A V lt gt e Store these settings by pressing ENTER e Press EXIT Panasonic Clock setting Clock setting MAN Time 20 30 24 Date 21 03 01 Panasonic Remote Control setting Timer recording To use a second Panasonic VCR l Tuning with one remote control in the same place Clock setting e Press MENU Othersettings e Select Other settings w e Access by pressing ENTER Select Remote A e Select the input field gt e Select the setting AY e Store by pressing ENTER Main menu Panasonic VCR 212 Other settings Remote VCR2 Language English Country others e Press EXIT VCR1
53. on playback DVD VCD Press Pause Il during playback Press SLOW D O3 the speed of slow motion increases by up to 5 steps by pressing the button repeatedly e Press Playback gt to restart playback Note You cannot move backwards with VIDEO CD during slow motion Fast Forward and Rewind SEARCH DVD VCD CD e Press SEARCH C3 during playback the speed of search increases by up to 5 steps by pressing the button repeatedly for MP3 only 1 step possible RQTD0035 A Panasonic MP3 Menu lt 1 MY FAVOURITES b gt Track 01 special remix Track 02 Track 03 Track 04 Track 05 Track 06 Track 07 Dua to select to add to PLAYLIST No Track Panasonic PROGRAM MENU RQTDO0035 A DVD Playback MP3 menu e Press MENU e Press SKIP QE E to select the page before or page after e Select Folder GROUP lt gt e Select MP3 Title AV Select PLAY MODE to add Title to PLAYLIST Press ENTER playback MP3 Title e Press Stop Oto stop playback press Playback gt to continue playback e Press Stop O Programme playback and Random playback DVD VCD CD MP3 You can select up to 32 tracks to play in the order you choose e Press PLAY MODE while stopped to display the screen PROGRAM Select the numbers of the tracks with the numeric buttons or cursor buttons A Y lt gt and press ENTER To clear an input select No and pr
54. ors B in order to select items on the menu next line A V next page lt gt EXIT Select or Store Operation EXIT DISPLAY RETURN EXIT a menu PROG CHECK TIMER POSITION MEMORY PLAY MODE 0O CANCELIRESET TIMER SPILP EP AV LINK cris Direct input indicated by by pressing numeric buttons ooo OKKA e000 CANCELIRESET Clear settings ONETOUCH MEMORY AUDIO r INDEX SKIP i Operate REPLAY Function Press this button during playback pe o kJ 6 REPEAT A BREPEAT SUBTITLE SET UP vcr Switch the remote control D to VCR DVD or TV NPUTSELECT To select the input press this button repeatedly a ea av VCR channel A1 A2 A3 front input or de DVD cri Switch the output from D VCR to DVD or vice versa 4 Not for DVD OUT see page 9 12 RQTD0035 A VCR Operations ay ga m INDEXSKIP 5 Es EJECT TAPE AUDIO DISPLAY rong aN CH C4 CANCELIRESET pA Eg ooo RKA 0000 m z 2 ShowView DIRECT REC TV REC PROG CHECK TIMER I TIMER SPILPIEP SEARCH VCR display Playback indicated by Stop indicated by O To stop winding a tape recording or playback Still Playback indicated by II I gt e Press this button during playback e Resume normal playback by pressing this button again or Playback gt Slow Playback e Keep this button pressed down for more than 2 seconds during playback
55. ressed but no timer recording was programmed e Programme a timer recording see pages 6 7 Please put VCR into stop mode first An attempt was made to change the programmed data while a timer recording was still in progress e You must stop the recording first by pressing the TIMER button before you can change the programming The meaning of some DVD On Screen Displays NO PLAY appears on the unit s display Adisc was inserted that the unit cannot play e Insert one that it can Child lock is aktiv e Insert your password No on screen menu e Goto the DISPLAY menu in the SETUP screen and select On screen messages On OSD screens not displayed or only partially on the television e Move the OSD downwards using the bar position selection HOO appears on the unit s display Trouble is likely to have occurred The number following H depends on the status of the unit e Press O I to switch the unit to standby mode and then back to ON disconnect the AC mains lead and then reconnect it The signal is copy protected Copying is not allowed e Please observe copyright laws when recording sound tracks and film This unit can copy only copy protected free disc s If you have forgotten your password e While DVD is stopped press and hold down on the unit C5 and De DVD area and also xs until Initialized appears on the television screen Turn the unit off then on again All of the settings will return to the factory default
56. t long enough e The preset VPS PDC settings can be manually changed ON The broadcaster provides VPS PDC signals If the program is starting earlier or later than planned the timer recording will be synchronised to the actual broadcast start Important The time and date settings must be exactly same as programme information programme magazine If there is a special VPS PDC time noted it must be used The recording can not start ifthe settings are not exact The broadcaster does not provide VPS PDC signals OFF The broadcaster providing VPS PDC signals but the function is turned off With this setting you have to add to the start and stop time so that the whole film can be recorded completely justin case the film is broadcasted out of the planned time e To store the programme press ENTER e In order to preset other recordings repeat this procedure e Press TIMER to switch the VCR to Standby mode for Timer recording Make sure that in the VCR display Ll appears RQTD0035 A Panasonic VCR Show View Timer recording Pos Name Date Start Stop Panasonic VCR 112 1 ARD 20 4 15 00 16 00 SP ON Panasonic VCR INTELLIGENT TIMER Pos Name Date Start Stop 19 04 02 VPS PDC amp ARD 20 04 15 00 16 00 SP ON ZDF 21 04 15 00 16 00 SP ON Timer recording Pos Name Date Start Stop Panasonic VCR 112 4 ZDF 21 04 15 00 46 00 SP ON E cates cates D
57. tched to standby Replaying a scene DVD VCD CD MP3 e Press REPLAY during playback Gi The player skips back a few seconds each time to replay parts of scenes Note You cannot skip beyond the beginning of a track or title This feature doesn t work with some discs Skipping chapters or tracks DVD VCD CD MP3 Play position Press SKIP during playback or while paused twice once j _once twice Each press increases the number chapters or tracks skipped CHAPTERTTRAGK CHAPTERTRACK HAPTERITRACK _ __4 POSITION MEMORY function DVD VCD CD MP3 This function allows you to memorise a position to start from even after switching the unitto standby or changing discs You can memorise positions for up to five different discs at time Press POSITION MEMORY during playback e Press Stop O to clear the position before playback Start playback after switching to standby e Press Playback gt to start playback from the memorised position and the position is cleared 16 RQTDO035 A ADVANCED SURROUND NORMAL 1 DvD VIDEO 3 I TLE AJSRD BASS PLUS ON DVD SETUP DISC ARD BASSS mAV ANI MIE OIN Soundtrack language Engish Subtitle language Automatic VIDEO DVD Menu language English GSAUDIO DISPLAY Child lock oR DEMO BEASYSET EVM to select Panasonic DVD SETUP DISC
58. the SETUP screen By choosing the rating level you can prohibit viewing certain scenes of a disc or complete discs This may not work with some discs Don t forget your password Note If you have forgotten your password see page 23 Sound and Picture DVD settings Press DISPLAY during playback Press DISPLAY the OSD menu appears Note Select the function direct with the buttons MAB MES ACB EOB see page 19 17 DVD Settings Panasonic DVD SETUP DISC VIDEO AUDIO G DISPLAY DEMO EASYSET Yiato select 3 to access Menu Panasonic DVD SETUP DISC VIDEO _ AUDIO amp DISPLAY Widto select ma to access Menu Panasonic DVD SETUP DISC _ VIDEO AUDIO DISPLAY g DEMO EASYSET Pakto select Panasonic DVD SETUP DT iVIDEO AUDIO _ C DISPLAY CPDEMO SEASYSET Wi toselect to access Menu Panasonic DVD SETUP Q DISC VIDEO amp AUDIO AUDIO _ G DISPLAY _ DEMO Soundtrack language 3E Subtitle language DVD Menu language i57 Child lock o Level All TV Aspect 4 3 Pan amp Scan Pan amp Scan AV1 Output Scart ZOOM o of PCM Down conversion BAS Dolby Digital MPEG Audio Em DTS Digital Surround E O Dynamic range compr EASYSET WIM to select to access Menu 18 to access Menu Menu language On screen mess
59. ton pressed down for more than 2 seconds during playback e Resume normal playback by pressing Playback gt Note For search functions see page 5 Erasure prevention of a cassette To prevent the accidental erasure of a cassette remove the erasure prevention tab If you want to record again on a cassette with erasure prevention and this symbol eX is flashing on the VCR display then cover the hole with adhesive tape NTSC Function This function allows to playback tapes which were recorded in NTSC ona PAL TV On some TV the pictures may be distorted during NTSC playback Try to adjust your TV For this purpose please also read the operating instructions for your TV To playback tapes on NTSC 4 43 TV with NV VHD1 EE MENU Other settings w JENTER NTSC playback y select the input field gt select the setting 4 43 A V JENTER EXIT Dubbing or recording of NTSC tapes in NTSC4 43 Formatis possible only with NV VHD1 EE Repeat Playback Function Press Playback gt for more than 5 seconds when the VCR is on stop mode the letter R will appear on the OSD The VCR will keep replaying the cassette until the end of the recorded part Press Stop Oto exit this function Child lock Function To deactivate the buttons on the unit and the remote control press the ENTER and EXIT buttons at the same time until this display appears This display will also appear if attempts are made to operate the unit when this function is activat
60. when recording music CDs DVDs have a greater volume so they use linear PCM which has a higher sampling rate Playback control If a Video CD has playback control written on it or its jacket it means that particular scenes or information can be selected for viewing interactively on the television using the menu screen This unit can playback Video CDs with playback control Title Chapter DVD s are divided up into large sections titles and smaller sections chapters The numbers allocated to these sections are called title numbers and chapter numbers Track Video CDs and CDs are divided up into sections called tracks and the numbers allocated to these sections are called track numbers TV screen formats TVs have 2 different formats 4 3 normal or 16 9 widescreen RQTDO035 A RQTDO0035 A page 7 page 9 page 6 7 page 6 7 page 7 8 page 5 page 3 6 page 11 page 8 page 6 page 6 page 7 Information about the VCR VCR Special Features I TIMER Through this INTELLIGENT TIMER function the programming and the recording will be even easier than before The INTELLIGENT TIMER is storing the programme data up to 8 timer recordings For example if you want to record the continuation of your favourite series you need only to press the TIMER button and the stored programme data will be displayed with today s date Now you can select the programme and with the confirmation of the TIMER REC button the programmi
61. y of use e Donotuse one old and one new battery or different types of batteries together e g one alkali and one zinc carbon battery Only insert batteries which contain no toxic materials such as lead cadmium mercury e Do not use rechargeable type batteries e Ifthe remote control will not be used for a long time remove the batteries and store them ina cool and dry place e Do not heat or short circuit the batteries e Remove spent batteries immediately and replace them with type AA UM3 or R6 Observe the and polarities when replacing the batteries Safety information CE This equipment complies with European conformity requirements in accordance with the conditions of electromagnetic compatibility and product safety E This equipment complies with the requirements of protection class 2 This equipment complies with the safety requirements of the VDE German Association of Electrical Engineers This equipment complies with the safety requirements of the PCBC Polskie Centrum Bada i Certyfikacji NORSK ADVARSEL FOR A REDUSERE FAREN FOR BRANN ELEKTRISK ST T ELLER SKADER P PRODUKTET MA DETTE APPARATET IKKE UTSETTES FOR REGN FUKTIGHET VANNDRAPER ELLER VANNSPRUT DET MA HELLER IKKE PLASSERES GJENSTANDER FYLT MED VANN SLIK SOM BLOMSTERVASER OPP APPARATET APPARATET MA IKKE PLASSERES EN BOKHYLLE ET INNEBYGGET KABINETT ELLER ET ANNET LUKKET STED HVOR VENTILASJONSFORHOLDENE ER UTILSTREKKELIGE S
62. yback gt is pressed e You can only playback DVD discs if the region number is the same as or includes the same region number as the unit or if the DVD is marked All e The disc may be dirty e Ensure that the disc is inserted with the label on the side to be played facing upwards e For some Disc it needs time to read the disc information this is nota functional fault Alternative DVD languages cannot be selected e An alternative language cannot be selected if the disc does not contain more than one language e With some discs the alternative language must be selected in a disc menu No DVD subtitles e Subtitles only appear if they are recorded on the disc e Subtitles are switched off Display the subtitles Soundtrack or subtitle language is not the one selected in the DVD setup menu e The language is not recorded on the disc Angle cannot be changed e Only one angle is recorded on the disc DVD SOUND No sound distorted sound e Check the connections Check the volume on the equipment you have connected If the DVD is recorded in DTS no sound will be output Try selecting another soundtrack e Turn ADVANCED SURROUND off if it causes distortion Piercing noise comes from the speakers e Ensure you have selected the correct setting for Dolby Digital Digital Surround and MPEG in the SETUP screen s AUDIO menu DVD PICTURE Picture distorted during search e The picture will be somewhat distorted at times This is normal

Panasonic NV-VHD1EC DVD VCR Combo User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents