Home

Nokia 9356656 Cell Phone User Manual

1. With the display in standby press gt Scroll to Settings and press Scroll to Restore factory settings and press amp amp Follow the instructions on the display Caution If you have erased a setting you cannot undo this operation The data is irretrievably lost Copyright 2005 Nokia All rights reserved Voice Voice voice dialling you must be aware of amp Before recording voice tags or using l Some essential facts Ic Voice e Voice tags are not language dependent They are dependent on the speaker s voice e Voice tags are sensitive to background noise Record them and make calls in a quiet environment When recording a voice tag or making a call by saying a voice tag make sure to speak clearly into the microphone e Very short names are not accepted Use long names and avoid similar names for different numbers rs Note You must say the name exactly as you said it when you recorded it This may be difficult in for example a noisy environment or during an emergency so you should not rely solely upon voice dialling in all circumstances Voice tags You can assign Voice tags to phone numbers and your car phone will automatically try to dial the number when it recognises the tag Copyright 2005 Nokia All rights reserved New voice tag This option lets you record a New voice tag assign it to a phone number and save it in the car phone memory You can save up to
2. T make an emergency call gt Pressand hold until Make an emergency call is shown on the display Confirm by pressing gt Confirm the security inquiry Yes by pressing or cancel by selecting No with and pressing When making an emergency call remember to give all the necessary information as accurately as possible Remember that your car phone may be the only means of communication at the scene of an accident do not cut off the call until given permission to do so 63 Technical data 11 Technical data Battery voltage 12 6 VDC 10 8 16 0 V Negative potential to ground GND Current carrying capacity 1 5 A off mode 1 mA Transmitting power EGSM 900 3 2 mW 2 W DCS 1800 1 0 mW 1 W System cable PCU 4 64 System cable wiring 1 2 3 Red BATTERY 12V Black GND ground Yellow MUTE radio mute When call is set up switch over from 12V to OV Blue ACC IGN ignition 5 2A fuse 1A fuse Copyright 2005 Nokia All rights reserved 12 Glossary DTMF tones DTMF Dual Tone Multi Frequency tones are the tones you hear when you press the number keys on the phone keypad DTMF tones allow you to communicate with voice mailboxes computerised telephony systems etc GPRS GPRS General Packet Radio Service enables wireless data transmission For wireless access to data networks you will need a GPRS access point from your network operator or service pr
3. to display the list of the last 10 In the standby display turn the Navi wheel to the right phone numbers you have called or to search for a contact entry If you are in the voice attempted to call display turning the Navi wheel to the right scrolls to start dialling a number through the voice tags you assigned for voice dialling a number Press and hold to delete text numbers or other entries Press the Navi wheel toreturn to the standby display to access a function in a particular context to start the menu and select an item to select an item from a list to start options and select an item 14 Copyright 2005 Nokia All rights reserved Basic components of the handset This key activates the following functions from the standby display gt Press to switch off loudspeaker An incoming call is indicated by a flashing display gt Press and hold to put the car phone in off mode Press again to return to the standby display P Press to switch incoming or ongoing calls from your car phone over to a compatible paired headset and back as desired This key activates the following voice functions from the standby display P Press to activate voice dialling and voice commands gt Press and hold to activate recording also during ongoing calls Copyright 2005 Nokia All rights reserved Alphanumeric keypad Use these keys to enter numbers 0 9 letters and other characters Several charac
4. List of menu functions Delete E Recorder Record Play Delete E Bluetooth Search for Bluetooth devs View active devices View paired devices Create connection Delete pairing Request authorisation Edit Bluetooth name Bluetooth name E User data Copyright 2005 Nokia All rights reserved Download contacts Change user User 1 User 2 Phone memory SIM and phone mem SIM memory Phone memory 25 Menu functions 6 Menu functions Messages 8 You can receive and read text messages n r car phone and write send and Messages 0 your car phone and v save text messages Before you can send text messages you must define necessary Message settings rs Note Remember that traffic safety comes first Don t hold the handset while driving and only use the features offered by your car phone when traffic conditions permit this rs Note When sending messages by means of the SMS network service your car phone may display the words Message sent This is only an indication that the message has been sent to the message centre number programmed into your car phone This does not mean that the message has been received at the intended destination 26 Create message gt With the display in standby press gt Scroll to Messages and press S gt Scroll to Create message and press 95 Use the alphanumeric keypad on the car handset to write your tex
5. Scroll to Settings and press amp Scroll to Time settings and press A Scroll to Set the time and press A Scroll to set the hour Press to take over the setting and continue with the minutes vvv v v Repeat the above step to set the minutes v Repeat the above procedure to access the options Time format Set the date and Date format to make the desired settings Call settings gt With the display in standby press V gt Scroll to Settings and press S gt Scroll to Call settings and press amp Copyright 2005 Nokia All rights reserved My number sending network service e Set by network This activates the setting you have agreed with your network operator e On This option activates your caller ID the person you call can view your car phone number e Off If you do not wish your number to be sent to the called party use this option to deactivate your caller ID gt Scroll to the desired option and press Call divert network service With Call divert you can direct your incoming calls to another number for example to your voice mailbox number For details contact your service provider Your car phone offers you a wide variety of options to choose from e Divert all voice calls This option diverts all incoming voice calls e Divert if busy This option diverts voice calls when your number is busy or when you refuse an incoming call e Divert if not answered
6. Speak now is displayed Say the voice tag belonging to the desired number loudly and clearly Your car phone plays the voice tag and automatically dials the number assigned to it To cancel voice dialling press Note If you are using a compatible headset with Bluetooth technology press the key on the headset to activate it before speaking the voice tag Voice commands You have a selection of phone features that can be activated by saying a voice command A voice tag may be assigned to as many as three of the commands on the list You can activate the voice command in the same way as making a call using a name tag Three options are available Play This option lets you play selected recordings The last made recording is played first Press amp while listening to a recording to skip it and go to the next one Download contacts You can use this feature to copy contact entries from a compatible mobile phone that supports Bluetooth wireless technology or from the SIM card installed in the compatible mobile phone to the car phone memory If a wireless Bluetooth SIM access profile connection is established the contact entries stored on the compatible mobile phone are automatically downloaded Conn to Bluetooth headset This option allows you to establish a wireless link to a compatible paired headset that supports Bluetooth technology If there is no headset paired with the car phone Search for audio enhancem is d
7. and press gt gt Scroll to View templates and press to view the list gt Scroll through the list of templates and press V to select the desired template P Press V to confirm selection of the template gt Scroll to the desired option and press gt Follow the instructions shown on the display Send The template selected is sent Delete To delete templates you saved scroll to Delete and press to delete the template rs Note While you can delete the templates you saved from received text messages you cannot delete the five standard templates stored in the car phone memory 29 Call register Call register F amp The car phone registers the phone l Call regist numbers of missed received and dialled Y calls as well as the time and date of your calls rs Note The car phone registers missed and received calls only if the network supports these functions and if the car phone is switched on and within the network service area Cb Note In these lists you can view up to 10 of the last calls made to your car phone or up to 10 of the last dialled numbers The most current item is shown at the top of the list Three options are available for each of the items in the call register Call Time of call or Delete gt Select an entry in the desired list and press S gt Scroll to the desired option and press gt Follow the instructions on the display Press 4 to
8. e On The fixed dialling numbers feature is active To set up fixed dialling numbers gt With the display in standby press V gt Scroll to Settings and press amp gt Scroll to Security settings and press gt Scroll to Fixed dialling and press D gt Scroll to the desired option and press gt Follow the instructions on the display B For further information see Access codes required for the SIM card on page 11 Copyright 2005 Nokia All rights reserved al Settings Equaliser settings Your car phone supports a variety of options for output over a loudspeaker Direct connection to the SP 2 loudspeaker supplied in the sales package Connection to compatible car radio loudspeakers using the audio line in of your car radio You must adjust the audio level suitably if this option is selected Connection to a compatible car radio loudspeaker over an additional relay that switches audio output over to the loudspeaker not included in the sales package Ask the service technician who installs your car phone for professional assistance To make the desired setting vvv yv 42 With the display in standby press Scroll to Settings and press S5 Scroll to Equaliser settings and press 9 Scroll to Loudspeaker or Radio loudsp and press amp to select the desired option Restore factory settings You can reset all of the menu settings to the original factory settings
9. such as the name of a person can be used as a voice tag to voice dial a call Before using voice dialling note that e Voice tags are not language dependent They are dependent on the speaker s voice e Voice tags are sensitive to background noise Record them and make calls in a quiet environment e You must say the name exactly as you said it when you recorded it e Very short names are not accepted Use long names and avoid similar names for different numbers rs Note Using voice tags may be difficult in a noisy environment or during an emergency so you should not rely solely upon voice dialling in all circumstances rs Note To assign a voice tag to a contact see Voice tags on page 43 gt To voice dial a number press to access the voice display The message Speak now will appear on the display gt Say the voice tag belonging to the desired number loudly and clearly Your car phone plays the recorded voice tag and automatically dials the number assigned to it Calling a contact name search B H CONTACTS RHC EFGHIJ gt In the standby display scroll right to the desired letter of the alphabet and press to open the list of names beginning with this letter gt Scroll to the desired name and press to dial the number PN Note You can add up to five phone numbers to an entry in your contacts The first number saved under a name is automatically set as the default number and is in
10. Breaking the rules may be dangerous or illegal Further detailed information is given in this user s guide gt gt amp OFF MODE If wireless phone use is prohibited or when it may cause interference or danger switch your car phone over to off mode To do so with ignition on press and hold s ROAD SAFETY COMES FIRST Remember that the safety of operating a motor vehicle in traffic requires the full attention of all motorists Only use your car phone if traffic conditions permit safe use and check if local laws regulations restrict the use of mobile phones while driving INTERFERENCE All wireless phones may get interference which could affect performance OFF MODE WHEN REFUELLING Switch your car phone over to off mode at a refuelling point Don t use near fuel or chemicals OFF MODE NEAR BLASTING Switch your car phone over to off mode where blasting is in progress Observe restrictions and follow any regulations or rules Copyright 2005 Nokia All rights reserved o g wy o n For your safety QUALIFIED INSTALLATION AND SERVICE Only a qualified professional may install or repair phone equipment CONNECTING TO OTHER DEVICES When connecting to any other device read the relevant user s guide for detailed safety instructions Do not connect incompatible products EMERGENCY CALLS Ensure the phone is switched on and in service P Press and hold until Make an emergency call is shown on the displ
11. This option diverts all voice calls you fail to answer e Divert if out of reach This option diverts voice calls when you are out of reach of the network Settings e Divert if not available This option diverts all voice calls you receive when you are not available e Cancel all diverts This option cancels any active divert options To make call divert settings gt With the display in standby press gt Scroll to Settings and press gt Scroll to Call settings and press gt Scroll to Call divert and press gt Scroll to the desired call divert feature and press You can select any of four options for each of the divert features offered e Activate This option lets you select the number you wish to direct diverted voice calls to your Voice mailbox or any other number e Cancel This option deactivates a call divert feature Check status This option allows you to check the status of a call divert feature e Delay This option sets the time period after which an incoming voice call is to be diverted if not answered This is only available if you have activated Divert if not answered Copyright 2005 Nokia All rights reserved 33 Settings rs Note The original factory setting for the delay time is five seconds Active call diverts are shown by an indicator on the display For further information see Display indicators on page 12 Automatic answer This feature allows you to automa
12. back Indicators for Bluetooth functions aj Device with Bluetooth technology has been paired with the car phone Bluetooth wireless technology is activated Notification indicators ct sex poo E Gp El Indicates that an item has been erased Indicates that your entry is incorrect or not permissible O K confirms a setting or selection made Indicates additional information Indicates a warning or a caution Your text message is being sent does not indicate that the message has been received 13 Basic components of the handset Basic components of the handset irs The handset consists of the function toenda call selectors the alphanumeric keypad the 7 ag a character or number microphone and the earpiece encered P toreturn to the previous menu Function selectors item or display The function selectors include four keys tax Navi wheel and a Navi wheel Depending on the Turn the Navi wheel to adjust the volume of the ringing setting selected you can choose from the tone of an incoming call or the loudspeaker volume during following options an ongoing call You can also use the Navi wheel to scroll within a menu f Press and hold In the standby display turn the Navi wheel to the left the emergency call function is cas to enter a phone number If you are in the voice display active turning the Navi wheel to the left scrolls through the f Press voice commands to accept an incoming call
13. currently active profile is displayed at all times using two indicators B User 1 Bl User 2 gt With the display in standby press gt Scroll to User data and press amp gt Scroll to Change to user 1 or Change to user 2 and press T to select the desired option gt The user profile selected is activated You may be prompted to enter the PIN code of the SIM card Phone memory You can copy contact data from any compatible mobile phone that supports Bluetooth wireless technology to your car phone Select from the following options SIM and phone mem This default setting lets you copy the contact data from the mobile phone SIM card and memory to the car phone memory e SIM memory This option lets you download only the contact data from your mobile phone SIM card to the car phone memory e Phone memory This option copies the entries stored in the phone memory of your mobile phone to the car phone memory 92 Copyright 2005 Nokia All rights reserved 7 Data communication Bluetooth wireless technology Bluetooth wireless technology enables wireless connections between compatible electronic devices at a maximum range of 10 metres Use the car phone as a modem for fax and data communication or to connect wirelessly to compatible enhancements with Bluetooth technology Note In some countries there may be restrictions on using devices with Bluetooth wireless technology Check with your dealer and the
14. desired option and press S gt Follow the instructions shown on the display Copyright 2005 Nokia All rights reserved Tones Speed dial a number P Press and hold the speed dialling key assigned to the number until the call is started Note For the setting options please see Speed dialling on page 33 Tones Tones You can choose the desired ringing tone for incoming calls change the volume and switch warning tones on or off as desired PN Note Use the Navi wheel to regulate the volume of the ringing tone when the car phone is ringing to notify you of an incoming call or to change the loudspeaker volume during a call in progress With the display in standby press Scroll to Tones and press 5 Scroll to the desired option and press Follow the instructions on the display vvv v 33 Settings Ringing volume This option sets the loudspeaker volume for an incoming call gt Toregulate the volume of the ringing tone when you receive an incoming call or to change the loudspeaker volume during a call in progress use the Navi wheel 2 Ringing tone This option offers you a range of ringing tones to choose from Select the one you would like to have notify you of an incoming call Warning tones This option lets you activate or deactivate special notification tones 34 Settings E Settings 8 Set the time and date gt With the display in standby press
15. local authorities Sending and receiving a business card You can send or receive a person s contact information as a business card either using Bluetooth wireless technology or in the form of a text message Receiving a business card Make sure that your car phone is ready to receive data by means of Bluetooth wireless technology The user of the other compatible phone can now send their business card and phone number using the desired medium When you have received a business card using Bluetooth technology or as a text message press the Navi wheel S and select Save to store the business card in the car phone memory If you do not want to save the business card select Discard Copyright 2005 Nokia All rights reserved Data communication Sending a business card You can forward a received business card to a compatible mobile phone using Bluetooth wireless technology if the phone supports it or to any handheld device that supports the vCard standard using the short message service Select Forward for the received business card or if you should also wish to save the business card for your personal use select Save and forward To send a business card using Bluetooth wireless technology select via Bluetooth To send a business card as a text message select Via text message GPRS General Packet Radio Service GPRS is a technology that allows mobile phones to be used for sending and receiving data over the mobile
16. or AC system Use the double sided adhesive tape supplied to fix the microphone as this will prevent noise from the car body being transmitted into the interior When you accept an incoming call or when an outgoing call is connected the system will automatically mute your car radio and the call will be switched over to the car phone loudspeaker Mounting System cable PCU 4 Pos 6 The system cable connects the car phone to the car s electronics system See the wiring diagram for exact instructions PN Note When laying the cables take care to position them so that they are located as far as possible from the electronics systems installed in your car in order to avoid electromagnetic interference Ensure that cables are placed so that they will not be subjected to mechanical wear and tear for example not laid under car seats or over sharp edges GSM antenna Pos 7 not included in the sales package Your car phone is designed to be connected to an external GSM antenna However if your car is equipped with a compatible radio GSM antenna with a frequency separating filter this may be used instead If your car does not come with a GSM antenna please contact your dealer for information on the best location for mounting and for the relevant installation guidelines RS232 adapter cable AD 3 Pos 8 An RS232 adapter cable provides a convenient way to connect your car phone to the serial port of a compatible laptop comput
17. return to the previous menu or press and hold to return to the standby display 30 Missed calls To view a list of up to 10 of the latest registered calls With the display in standby press V Scroll to Call register and press A Scroll to Missed calls and press A to view the list Scroll through the list Press and hold N to return to the standby display vvvvyv Received calls To view a list of up to 10 registered numbers of the latest calls you have received gt With the display in standby press A gt Scroll to Call register and press gt Scroll to Received calls and press to view the list gt Scroll through the list Dialled numbers You can use a shortcut to view the list of up to 10 of the last dialled numbers with the display in standby press and hold Alternatively to view the list of dialled numbers gt With the display in standby press gt Scroll to Call regist and press VY gt Scroll to Dialled numbers and press to view the list gt Scroll through the list Copyright 2005 Nokia All rights reserved Contacts H amp All of the entries you create in the EE Contacts contacts are saved in the internal car n phone memory You can also copy entries from a SIM card or a compatible mobile phone that supports Bluetooth wireless technology to your car phone For further information see Download contacts on page 51 For each user profile you can s
18. to switch incoming or ongoing calls over to your wireless headset PN Note To be able to use this feature you must pair the wireless headset and the car phone using Bluetooth wireless technology For further information see Bluetooth wireless technology on page 47 Overview of the car phone and equipment Quick access to the contacts H B contacts RHC EFGHIJ To call a contact quickly gt In the standby display scroll right to the first letter of the contact name and press gt Scroll to the name and press to dial the number PN Note To save contacts see Download contacts on page 51 rs Note You can assign up to five phone numbers to a name in your contacts For further information see Contacts on page 31 10 Mobile data communication using Bluetooth wireless technology or an RS232 cable Your car phone comes with a convenient feature allowing you to connect compatible external devices such as a laptop computer or compatible vehicle on board systems to the car phone either wireless through Bluetooth wireless technology or using an RS232 cable This means that you can now utilise GSM data services such as GPRS or HSCSD for mobile fax transmissions Internet access or vehicle fleet services For further information see Data transfer over the RS232 interface on page 55 SIM card To operate your car phone you must insert a SIM card in the radio unit For further information see Installin
19. when the car is stationary Attempting cellular communication while in a moving vehicle is not recommended Fax transmission is more easily impaired than data or text message transmission Check the signal strength on your car phone display If the cellular signals are not strong enough to support a voice call data connection should not be attempted until you can find a location with better reception Reference information Data transfer over the RS232 interface Connect your compatible laptop computer to the car phone system with the adapter cable D SUB9 to 10 pin western supplied with the phone Should you wish to transfer data between your car phone and a compatible laptop plug the 10 pin western connector into the port provided in the radio unit The D SUB9 connector plugs into the laptop A compatible mobile fax device can also be connected For further information see Overview of the car phone and equipment on page 7 To use your modem you must select the data transmission speed Standard 19200 bps on the laptop For more information see the Nokia Web site http www nokia com 55 Copyright 2005 Nokia All rights reserved Installation 8 Installation Note The Nokia 810 car phone may only be installed by a Your Nokia 810 car phone qualified service technician using the approved original The Nokia 810 car phone is designed for installation in motor Nokia parts supplied in the sales package Please note v
20. 12 voice tags with the related numbers per user profile in your car phone A voice tag can be any spoken word or words such as the name of a person gt With the display in standby press Scroll to Voice and press Scroll to Voice tags and press 9 Scroll to New voice tag and press S95 Scroll to the desired name in the contacts and press B vvvvyv Scroll to the desired number you wish to record the voice tag for and press Press S again and you are prompted to speak the voice tag you have selected for this entry v gt Follow the instructions on the display Voice tag list To check all of the voice tags saved in your car phone memory and to edit the list gt With the display in standby press Scroll to Voice and press D Scroll to Voice tags and press 95 Scroll to List of voice tags and press Scroll to the desired name in the contacts that you wish to edit and press Scroll to the desired option and press vvv v v 43 Voice gt Follow the instructions on the display Select from the following options Play This option plays back the voice tag as recorded Change You can replace any voice tag by a new one Select this option and say the new voice tag Delete voice tag This option erases a voice tag and makes room in the memory for a new voice tag Voice dial a number q_e 44 Ka G Speak now ERU To voice dial a number Press Q
21. Bi Call register Missed calls Received calls Dialled numbers Bl Contacts Search Add contact Edit contact Delete Add number Memory status Speed dials Bi Tones Ringing volume a Ringing tone Warning tones Bi Settings Time settings Call settings My number sending 24 Set by network On Off Call divert Divert all voice calls Divert if busy Divert if not answered Divert if out of reach Divert if not available Cancel all diverts Automatic answer Automatic answer off Automatic answer on Call waiting Call waiting activated Call waiting deactivated Check status Speed dialling Speed dialling on Speed dialling off Phone settings Language Backlight settings Cell info display Cell info display on Cell info display off Network selection Automatic Manual Power down timer Voice mailbox Listen to voice messages Voice mailbox number GPRS modem Copyright 2005 Nokia All rights reserved a Security settings PIN code request Change PIN code Closed user group Default On Off Fixed dialling Off Number list On Equaliser settings Loudspeaker Radio loudsp Restore factory settings Bi Voice Voice tags New voice tag list of voice tags Play Change Delete Voice commands a New voice command a List of voice commands Play Change
22. User Guide Installation Guide 9356656 Issue 3 DECLARATION OF CONFORMITY We NOKIA CORPORATION declare under our sole responsibility that the product TFE 4R is in conformity with the provisions of the following Council Directive 1999 5 EC A copy of the Declaration of Conformity can be found at http www nokia com phones declaration of conformity C 168 Copyright 2005 Nokia All rights reserved Reproduction transfer distribution or storage of part or all of the contents of this document in any form without the prior written permission of Nokia is prohibited Nokia Nokia Connecting People and Navi wheel are trademarks or registered trademarks of Nokia Corporation Other products and company names mentioned herein may be trademarks or tradenames of their respective owners Bluetooth is a registered trademark of Bluetooth SIG Inc Nokia operates a policy of continuous development Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice Under no circumstances shall Nokia be responsible for any loss of data or income or any special incidental consequential or indirect damages howsoever caused The contents of this document are provided as is Except as required by applicable law no warranties of any kind either express or implied including but not limited to the implied warranties of merchantability and fitness for a particular
23. ally activates the user data profile that was in use the last time the phone was switched on If no entries have been made in the car phone memory for this particular user profile the car phone asks you if you want to copy the contact entries from the SIM card memory to the car phone memory for this user profile Copyright 2005 Nokia All rights reserved Switching on off and off mode rs Note The car phone entries represent those in the internal car phone memory and not those on the SIM card in use Switching off the phone When you switch off your car ignition the car phone is not switched off automatically it remains in service for the period of time that you set using the power down timer Then the phone automatically switches off Note The factory setting for the power down timer is five minutes Off mode amp To change over to off mode when your car s ignition is switched on b gt Press and hold gt Then press and hold m When your car phone is in off mode the display as depicted in the figure above is shown gt To put your car phone back into service press gt Follow the instructions shown on the display Call functions 4 Call functions Voice dialling amp You can make a phone call simply by Speak now saying a voice tag that has been added T FREIE to a number in the contacts Name tags may be added to up to 12 of the numbers stored in the contacts Any spoken word or words
24. ammable liquids gases or explosive materials in the same compartment as the phone its parts or accessories Copyright 2005 Nokia All rights reserved For vehicles equipped with an air bag remember that an air bag inflates with great force Do not place objects including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area If in vehicle wireless equipment is improperly installed and the air bag inflates serious injury could result Failure to observe these instructions may lead to suspension or denial of telephone services to the offender or legal action or both Emergency calls Emergency calls may not be possible on all wireless phone networks or when certain network services and or phone features are in use Check with local service providers A Caution This car phone like any wireless phone operates using radio signals wireless and landline networks as well as user programmed functions Because of this connections in all conditions cannot be guaranteed Therefore you should never rely solely upon any wireless phone for essential communications for example medical emergencies Copyright 2005 Nokia All rights reserved Emergency calls To make an emergency call amp Ifthe car phone or car ignition is not on switch it on Check for adequate signal strength Some networks may require that a valid SIM card is properly inserted in the car phone
25. ay Confirm by pressing S P Confirm the security inquiry Yes by pressing S or cancel by selecting No with 44 and pressing Give your location Do not end the call until told to do SO CALLING Ensure that the car s ignition is on Select the desired phone number or enter the phone number including the area code then press To end a call press v To answer a call press ANTENNA In order to comply with RF exposure requirements for mobile transmitting devices a minimum distance of 20 cm must be maintained between the antenna and all persons FUSE REPLACEMENT Replace a blown fuse with a fuse with of the same type and size Never use a fuse with a higher rating Network Services Network Services About accessories The wireless phone described in this guide is approved for use in the EJGSM 900 and GSM 1800 networks N Warning A number of features included in this guide are called Network Use only accessories approved by the phone Services These are special services that you arrange through manufacturer for use with this particular phone model your wireless service provider Before you can take advantage of The use of any other types may invalidate any approval any of these Network Services you must subscribe to them or warranty applying to the phone and may be through your service provider and obtain instructions for their dangerous use from your service provider For availability of approved accessories pleas
26. d name in the contacts and press S vvv v Scroll to the symbol you wish to assign to the number you are adding and press amp gt Enter the number and press S to save it Query the memory status This option allows you to view the free storage space in the car phone memory gt With the display in standby press D Scroll to Contacts and press S Scroll to Memory status and press S vv v You can now view the memory status on the display Copyright 2005 Nokia All rights reserved Speed dialling The speed dialling option is a convenient shortcut function that lets you dial a phone number assigned to a number key quickly and easily To activate On or deactivate Off the speed dialling option select Settings gt Call settings gt Speed dialling Assign a phone number to a speed dialling key You can assign any phone number in your contacts to a speed dialling key to Note that the key is reserved for speed dialling your voice mailbox The following options are available for each of the dialling keys View number Change or Delete gt With the display in standby press gt Scroll to Contacts and press D gt Scroll to Speed dialling and press to view the list of speed dialling keys and the phone numbers assigned to them gt Scroll to the desired entry in the contacts and press The options View number Change and Delete are displayed gt Scroll to the
27. d press S Scroll to the desired message and press S Press to confirm the selection Scroll to the desired option and press V vvvvvyv Open This option opens the selected text message Details Select this option to view the name and phone number of the recipient and the time and date the text message was sent Delete This option deletes a text message Copyright 2005 Nokia All rights reserved Message settings To be able to send text messages you must define settings on your car phone Message centre number You receive this number from your service provider Note This option saves the phone number of the message center which you need to send text messages Reply using same message center network service Replies to text messages are typically handled by the SMS center to which the sender subscribes Reply via same centre allows the recipient of your message to send you a reply using your message center To make these settings With the display in standby press D gt Scroll to Message settings and press A gt Scroll to the desired option and press gt Follow the instructions on the display Copyright 2005 Nokia All rights reserved Messages View templates Your car phone has five standard templates for text messages In addition to these you can save five templates based on received text messages gt With the display in standby press D gt Scroll to Messages
28. d return to the call display The call in progress remains active PN Note You can save DTMF strings as contacts For further information on adding entries to the contacts see Add a name on page 31 Contacts During a call you may wish to view contact entries to check a number or to give the caller a particular number To view contacts gt During a call press D gt Scroll right to the desired letter of the alphabet and press amp to open the list of names beginning with this letter 21 Options during a call gt Scroll to the desired name and press S to view the number P Press 4 to exit the contacts The call in progress remains active Adjust the loudspeaker volume gt During a call adjust the loudspeaker volume with Z amp A Accepting or refusing an incoming call You can either accept or refuse any incoming call P Press amp to accept an incoming call and when finished press v to end it P Press 4 to refuse an incoming call If the function Divert if busy is activated network service and your incoming calls are directed to another number such as your voice mailbox number any call you refuse is also diverted to this number For more information see Call divert network service on page 35 22 Recorder The tape recorder feature allows you to record pieces of speech sounds or an active phone call Warning Obey all local laws governing recording of calls Do not use thi
29. dicated with i General Other number types are B Mobile Br Home aM Office and Wm Fax Copyright 2005 Nokia All rights reserved amp To call any one of the other numbers BE stored for a name I 123456 MUELLER gt Press S95 and scroll to the desired symbol or phone number gt Press amp to dial the number Redialling To redial a number you have recently dialled you can view a list of up to 10 numbers that you have last called or attempted to call gt Inthe standby display press gt Scroll to the desired number or name gt Press amp to dial the number Making a call using the keypad You can also make a call by entering a phone number gt In the standby display to enter the desired phone number press the number keys to 9 gt If you entered the number incorrectly press to delete it gt To call the number shown on the display press 7 Redialling Using the Navi wheel to make a call You can use the Navi wheel to enter a phone number and make a call P Inthe standby display scroll left to the first digit in the phone number and press gt Repeat this step for the other digits of the desired number until the complete phone number is shown on the display gt Press to call the number List of favourites You can add up to 12 contacts to this list The list of favourites allows you to quickly access numbers you frequently call To view the li
30. e check with your dealer rs Note Some networks may not support all language dependent characters and or services Copyright 2005 Nokia All rights reserved 1 General information Overview of the car phone and equipment Your car phone is made up of several components which are described below Car phone equipment 1 Radio unit TFE 4R The radio unit is a EJGSM 900 1800 car telephone with Bluetooth wireless technology that allows you to connect a compatible external GSM antenna and compatible external devices wireless by Bluetooth technology or using an RS232 adapter cable Copyright 2005 Nokia All rights reserved General information Display XDW 1R The separate display comes with generously sized easy to read fonts convenient user customisable display positioning and automatic backlighting that is configurable for day or nighttime use Handset HSU 4 The handset comprises a set of function elements keys and Navi wheel alphanumeric keypad microphone and earpiece The handset is specially designed so that accessing key telephone functions is made simpler for the user allowing intuitive operation Loudspeaker SP 2 A separate loudspeaker is provided for top quality audio transmission of the acoustic signals from your car phone and voice transmission when calls are made Should you wish to use the loudspeakers belonging to your car radi
31. ehicles The sales package contains a convenient handsfree that non observance of this requirement will result in device that allows you to make calls without holding a phone to loss of warranty End users should remember that the car your ear a separate handset for ease of use and an easy to phone comprises complex neal equipment that read display requires professional installation using special tools and expert know how PN Note Note that the instructions contained in this installation guide are general guidelines which apply for the installation of the car phone in an automobile However due to the wide variety of car types and models available on the market this guide cannot consider the individual technical requirements relevant for any particular vehicle Contact the vehicle manufacturer for further detailed information about the vehicle in question For important safety information and or instructions on the operation care and maintenance of your car phone see Important safety information on page 62 and Care and maintenance on page 61 Car phone equipment 36 Copyright 2005 Nokia All rights reserved Safety first Note Please read the basic safety guidelines set out below before beginning any installation work Make sure that the car ignition is off and disconnect the car battery before beginning with the installation work and ensure that it cannot be reconnected i
32. ellular signal can be obtained A stronger signal allows more efficient data transmission Cellular data communications are subject to a number of factors that may cause interference Noise Radio interference from electronic equipment and devices or from surrounding traffic may impact the transmission quality Handovers As the car phone user moves from one network cell to another the signal strength of the channel drops and the cellular telephone exchange may hand the user over to a different cell and frequency where the signal is stronger A cell handover may also occur when the user is stationary due to varying cellular traffic loads Such handovers may cause delays Dead spots and dropouts Dead spots are areas where radio signals cannot be received Dropouts occur when the car phone user passes through an area where the radio signal is blocked or reduced by geographic or man made obstructions such as hills or high buildings Copyright 2005 Nokia All rights reserved Low signal strength Due to either distance from a base station or obstacles between your car phone and the base station the radio signal strength from a cell site may not be strong or stable enough to provide a reliable cellular connection for trouble free reception or transmission Therefore to ensure the best possible communication remember to take the following points into consideration when using your car phone Data and fax transmission will work best
33. er For further information see the section on Access codes required for the SIM card on page 11 59 Copyright 2005 Nokia All rights reserved Audio settings Audio settings Your car phone supports a variety of options for output over a loudspeaker Direct connection to the SP 2 loudspeaker supplied in the sales package e Connection to a compatible car radio loudspeaker over an additional relay that switches audio output over to the loudspeaker not included in the sales package e Connection to the compatible car radio loudspeakers over the line in input of your car radio If you select this option you must adjust the audio level accordingly To make audio settings select the Settings menu gt Scroll to Equaliser settings and press A gt Scroll to the desired option and press S 60 Function test After your car phone has been installed it needs to be checked to ensure that it is working properly When testing the operation of the equipment also check that it has been mounted so that it in no way impairs the driver during operation of the vehicle rs Note To make a wireless connection between your car phone and a compatible accessory with Bluetooth technology ensure that the devices are within the range necessary for Bluetooth transmission Remember that external devices need to be supplied with sufficient power for this feature check the battery pack Included in the sales package e Radi
34. erved Care and maintenance e Use only an approved antenna Unauthorised antennas modifications or attachments could damage the car phone and may violate regulations governing radio devices All of the above suggestions apply equally to your car phone or any accessory If any of them is not working properly take it to your nearest qualified service facility The personnel there will assist you and if necessary arrange for service 61 Important safety information 10 Important safety information Traffic safety Do not use a handset while driving a vehicle Always secure the phone in its holder do not place the phone on the passenger seat or where it can break loose in a collision or a sudden stop Remember road safety always comes first Operating environment Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it or when it may cause interference or danger Electronic devices Most modern electronic equipment is shielded from radio frequency RF signals However certain electronic equipment may not be shielded against the RF signals from your car phone Pacemakers Pacemaker manufacturers recommend that a minimum separation distance of 20 cm be maintained between the vehicle antenna and a pacemaker to avoid potential interference with the pacemaker These recommendations are consistent with the independent research by and recommenda
35. es are indicated by with read text messages indicated by the Ej symbol A flashing SMS indicator E21 means that the message memory is full To be able to send or receive a new message you must delete some of the old ones If you have received more than one text message gt With the display in standby press Scroll to Messages and press 5 Scroll to Inbox and press S to view the list of messages Scroll to the desired message and press S to read it vvv v Scroll to either browse through the message or display the message itself the sender or sender s phone number and the date and time the message was received Your car phone comes with a number of options for handling the message selected gt Press 95 gt Scroll to the desired option and press 27 Messages Call Select this option to make a call to the sender s phone number Reply Select this option to write a reply to a text message you received Forward Select this option to forward a text message to another number Save as template This convenient option lets you save a received text message as a template To use the template when writing your own text message select Reply with template Delete Select this option to delete a text message 28 Sent messages You can open a sent message view its details or delete it With the display in standby press amp V Select Messages and press Scroll to Sent messages an
36. ess V Cell info display When this function is activated information about the radio cell you are using is displayed However you can only use this network service if the car phone is booked into a cellular network based on microcellular network MCN technology To select this function gt With the display in standby press Scroll to Settings and press Scroll to Phone settings and press WY Scroll to Cell info display and press A Scroll to Cell info display on or Cell info display off and press A to select the desired setting gt Follow the instructions shown on the display 37 Settings Network selection You can select the cellular network in which you use the car phone manually or automatically e Automatic Your car phone automatically selects a suitable available cellular network e Manual You can view a list of available cellular networks and select any network that has a roaming agreement with your home network operator The car phone stays in manual mode until the automatic mode is selected or another SIM card is inserted into the phone To select the desired cellular network With the display in standby press B Scroll to Settings and press Scroll to Phone settings and press S Scroll to Network selection and press 8 Scroll to the desired setting and press vvvvvy Follow the instructions shown on the display 38 Power down timer Your car p
37. etooth technology you may need to break an existing Bluetooth wireless connection for example to a mobile phone 48 Pairing with devices with Bluetooth technology To create a connection you may need to exchange Bluetooth passcodes with the device you are connecting to for the first time This operation is called pairing The Bluetooth passcode is a 1 to 16 character long numeric code If you are asked to enter a passcode you must enter the passcode supplied with the device When establishing a wireless connection to devices such as a mobile phone using Bluetooth technology you may be able to use a temporary passcode created by yourself This passcode is used only once and you do not have to memorise it Enter this passcode into the two devices sharing a Bluetooth connection Then follow the instructions shown on the displays of the two devices To start pairing select a device on the list gt Scroll to the desired device and press V View active devices To view the currently active devices with Bluetooth technology that share a connection with your car phone gt With the display in standby press S gt Scroll to Bluetooth and press S gt Scroll to View active devices and press S Scroll to the desired device with Bluetooth technology and press Scroll to the desired option and press A vv Press v to return to the previous menu Press and hold N to return to the standby display Copy
38. g the SIM card on page 16 Comfortable volume regulation with Navi wheel g e Regulate the volume of the ringing tone JJ notifying you of an incoming call simply un by scrolling with A as needed You can also adjust the loudspeaker volume during an ongoing call with 2A Copyright 2005 Nokia All rights reserved Before putting your phone into operation Before you use your car phone note the following e The car phone is automatically switched on with the car ignition e When you switch off your car ignition the car phone is not Switched off automatically it remains in service for the period of time that is set using the power down timer For further information see Power down timer on page 38 Note Check your car phone equipment regularly to ensure that it is correctly mounted and is working properly A valid SIM card is required for operation of your car phone For further information see Installing the SIM card on page 16 Stickers in the sales package The stickers supplied with your car phone are important for service and related purposes P Attach sticker B to your warranty card Copyright 2005 Nokia All rights reserved Before putting your phone into operation Access codes required for the SIM card PIN code 4 8 digits The PIN Personal Identification Number protects your SIM card against unauthorised use The PIN code is usually supplied with the SIM card Some se
39. ght 2005 Nokia All rights reserved Options during a call Options during a call The following options are available to you during an active call e Mute e Send DTMF e Contacts To access these options gt Press V during a call to view the list of options gt Scroll to the desired option and press SA gt Follow the instructions shown on the display Mute call pr amp To mute a call in progress select Mute Muted which switches off the microphone T UNMUTE Muted is displayed gt Press S during an active call gt Scroll to Muted and press P to mute the call P Press S to unmute the microphone Send DTMF tones DTMF tone strings can be used to send passwords or to access your answering machine or to control an automatic voice dialogue system gt During a call press gt Scroll to Send DTMF and press S Copyright 2005 Nokia All rights reserved gt Scroll right to access the contacts in order to select a string of numbers that have been predefined and saved gt Scroll left to enter a string of numbers P Press V to select the desired entry P If you have accessed the contact entries scroll to the defined string and press or gt To enter the desired string of numbers use the keypad For further information see Basic components of the handset on page 14 When a number is selected it is immediately sent as a DIMF tone gt Press 4 to exit this option an
40. h the display in standby press D Scroll to Bluetooth and press 8 Scroll to View paired devices and press S5 Scroll to the name of the desired device and press Scroll to Edit Bluetooth name and press e The devices that are paired with the car phone are displayed with their respective Bluetooth names Scroll to the desired device and press amp Scroll to the desired option Yes or No and press S If you select Yes the Bluetooth name currently in use is displayed vvvvvyv v Use the Navi wheel text editor to make any desired changes Press to delete a character Press to save an entry Entry completed is displayed Scroll to Yes and press A to confirm vvv v 49 User data The car phone Bluetooth name This option lets you change the Bluetooth name of your car phone which is shown to others Use the alphanumeric keypad to change the name The factory setting is Nokia 810 gt With the display in standby press gt Scroll to Bluetooth and press e gt Scroll to Bluetooth name and press amp 5 The name of the car phone appears on the display as Nokia 810 Press S9 to select the device Edit Bluetooth name is displayed Scroll to Yes or No and press S to select the desired option P Ifyou select Yes you can now use the text editor to change the name P Press to delete a character gt When you have finished entering characters press P Entry comp
41. he selected recording is played gt Press to return to the list of recordings or to the previous menu item gt To stop playing the recording press Delete You can use this option to erase a voice command in order to make room for new ones gt With the display in standby press gt Scroll to Recorder and press to view the list of recordings gt Scroll to the desired recording in the list and press D gt Scroll to Delete and press gt Press V again to go to the next recording Copyright 2005 Nokia All rights reserved Bluetooth wireless technology Bluetooth wireless technology d amp Bluetooth wireless technology is an I iai Bluetooth international standard for wireless Y i short range communication allowing you to establish a wireless connection between your car phone and a compatible device supporting Bluetooth wireless technology Such devices may include for example mobile phone a laptop computer or a wireless headset Since devices with Bluetooth technology communicate using radio waves your phone and the other device do not need to be in direct line of sight The two devices only need to be within a maximum of 10 metres of each other although the connection can be subject to interference from obstructions such as the car body or from other electronic devices PN Note If you wish to use this function make sure that both the car phone and the other device support
42. heel to make a call 19 List of favourites 0 002 e eee eee 19 Call waiting 20 Options during a call eee ee eee 21 Using the MENU cies bined EE Ed CE RE a 23 Accessing a menu function 23 List of menu functions 23 Menu TUDCEIONS irap rr Rar RR 26 Messages eee eee eee eee eee 26 Call register 30 Contacts 2teiseiexaeedesed nan aae a ene 31 TONGS cxx tee Gee Por IM MEC 33 s dun m 34 VOICE caesos eet ie dtu ER RaE e unes 43 RECOIEE doine un UENIRE 46 Bluetooth wireless technology 47 User data scere Ra RR ERRORES 50 Table of content Data comm nieati li oi sa eisai saa een echo tara a 53 Bluetooth wireless technology 53 Sending and receiving a business card 53 GPRS General Packet Radio Service 53 HSCSD High Speed Circuit Switched Data 54 Reference information 2 54 lnstallalolt xs ssvakkGp e EFE ORG Pu ean 56 Your Nokia 810 car phone 56 Safety first esiis cc cece 57 Mounting ze ecexa Re Re ER E ene 57 Audio settings cceee eee eee eee 60 Function test 0 ee eee eee eee eee 60 Included in the sales package 60 4 Care And marfensree 1 uacua carrii icti 61 Important safety information 62 sg rr TT 64 GOSS duwadasdxaa d enna d EX Kad CR ROW 65 Copyright 2005 Nokia All rights reserved For your safety Read these simple guidelines
43. hese codes may only include the numbers 0 to 9 For further information see Access codes required for the SIM card on page 11 Copyright 2005 Nokia All rights reserved Closed user group This is a network service that specifies the group of people you can call or who can call you For further information contact your network operator or service provider You can choose from three options for this service e Default The settings made by your service provider are active e On The closed user group service is active e Off The closed user group service is deactivated Fixed dialling numbers You can restrict your outgoing calls to selected phone numbers if this function is supported by your car SIM card To save and edit the numbers on this list you need the PIN2 code rs Note If you wish to use this feature when accessing the SIM card of a compatible mobile phone connected to your car phone using Bluetooth SIM access profile technology you must define the corresponding settings in the compatible mobile phone For further information see the user guide applicable for the compatible mobile phone with Bluetooth technology that you are using You can choose from three options for this feature when using the car SIM card installed in your car phone Settings e Off The fixed dialling numbers feature is deactivated e Number list This option allows you to view the phone numbers that may be used for outgoing calls
44. hone amp If you have a compatible mobile phone that supports Bluetooth technology you can copy contact entries from the mobile phone to the car phone novmnload contacts To download the contacts from your compatible mobile phone you can use a personal voice command for example Copy contacts or select Download contacts in the User data menu For further information see User data on page 50 rs Note To be able to use this feature you must pair the mobile phone and the car phone using Bluetooth wireless technology For further information see Bluetooth wireless technology on page 47 Copyright 2005 Nokia All rights reserved Overview of the car phone and equipment Multi user capability amp This feature lets you store personal entries or phone settings under two different user data profiles For example you can save contact entries voice tags for voice dialling and voice commands or ringing tones for two users and access them from the car phone using the same SIM card Just activate your personal user profile to access your data USER DATA l User 1 Switchover to wireless headset P amp This feature supports use of compatible Headset headsets with Bluetooth technology paui You can switch calls over from handsfree mode where the car phone microphone and loudspeaker system is used to a wireless headset that is comfortable and easy to use Press the s key on the car phone handset
45. hone comes with a power down delay that keeps your phone in service for the period of time set even when the car ignition is switched off After you switch off the ignition the car phone remains in operation for the time set in Power down timer If you are ina call when the ignition is switched off the power down timer does not begin the countdown until the active call ends rs Note The original factory setting for the power down timer is zero minutes The power down delay is limited to a maximum delay time of 24 hours Cp Note Your car phone is powered by the car battery When setting the power down timer take care not to drain your car battery To set the power down timer With the display in standby press Scroll to Settings and press B Scroll to Phone settings and press S95 Scroll to Power down timer and press vvvvyv Scroll to set the time as desired P Press 9 to activate the timer A message on the display notifies you that the power down timer is set Copyright 2005 Nokia All rights reserved Voice mailbox Your service provider may offer you a voice mailbox service which you have to install before you can receive voice messages To access this mailbox you may need to save the number to your car phone Your service provider will give you further information on this service and let you know the number of your voice mailbox Voice mailbox number To enter your voice mailbox number Wi
46. ing Bluetooth technology are switched on There may be restrictions on using such devices in some countries Check with your local authorities Activating and deactivating Bluetooth The Bluetooth function is always activated in your car phone However in other devices with Bluetooth technology for example mobile phones Bluetooth may have to be activated or deactivated in the device Make sure that Bluetooth is active in 47 Bluetooth wireless technology all devices supporting Bluetooth wireless technology that you wish to use with your car phone For further information see the user s guide applicable for the device with Bluetooth technology that you are using Search for audio enhancements You can search for a wireless headset with Bluetooth technology gt With the display in standby press gt Scroll to Bluetooth and press S gt Scroll to Search for audio enhancem and press The car phone begins to search for enhancements supporting Bluetooth wireless technology Devices that are found are shown on a list with the device found last listed at the bottom gt Scroll to browse the list P Press V to begin pairing rs Note A wireless headset with Bluetooth technology can only be found by the car phone if there is no active Bluetooth wireless connection from the wireless headset to another compatible device supporting Bluetooth technology Therefore to switch over to a wireless headset with Blu
47. isplayed For further information see Search for devices that support Bluetooth technology on page 51 Copyright 2005 Nokia All rights reserved New voice commands This option allows you to record a voice command one or more words acting as a spoken command and assign it to a function in the list of voice commands gt With the display in standby press B Scroll to Voice and press 8 Scroll to Voice commands and press S5 Scroll to New voice command and press B vvvyv Scroll to the desired function for which you wish to record a voice command and press gt Press V again and you are prompted to speak the voice tag you have selected for this entry gt Follow the instructions on the display The voice command list includes the phone functions listed for voice commands Each function on the list can be checked and edited using the options below e Play voice commands This option plays the voice command as recorded e Change You can record a new voice command for a selected entry replacing the existing one Delete voice command This option erases a voice command and makes room in the memory for a new one Copyright 2005 Nokia All rights reserved Voice Before using voice commands note that e Voice commands are not language dependent They are dependent on the speaker s voice e Voice commands are sensitive to background noise Record them and make calls in a quiet environmen
48. led SMSC number You need the SMSC Short Message Service Centre number to send text messages 65
49. leted is displayed Scroll to Yes and press S to save the name vv 50 User data i The car phone can store and administrate data or settings under two Ls Sea different user data profiles A user profile includes contact entries name tags and voice commands or car phone settings Now two users sharing the car can access their personalized user data using the same SIM card simply by activating their personal user profile rs Note The indicator for the currently active user profile is shown in the status row of the display If user profile 1 is active a is shown If user profile 2 is active i is shown One of the user profiles is active in the car phone at all times When you use the car phone for the first time user profile 1 is active Copyright 2005 Nokia All rights reserved Download contacts You can use this feature to copy contact entries from the car SIM card inserted in the car phone or from a compatible mobile phone supporting Bluetooth wireless technology to the car phone memory PS Note Many phones with the Symbian operating system require an additional application to be installed in order to download contacts The software and installation help can be downloaded free of charge from the Nokia Web site http www nokia com support rs Note You do not have direct access to the contact entries stored on a SIM card inserted in the car phone To access these numbers you must copy them to the car
50. ll New recordings are automatically saved in the memory When the memory is full the message No memory to save rec is displayed To be able to make new tape recordings you must erase some old ones 46 rs Note You can easily play your recordings using a voice command Say the voice command and your car phone starts to play the last recording Press to skip to the next recording rs Note To use this shortcut you must assign a voice command to this function in your car phone For further information see Voice commands on page 44 Record This option allows pieces of speech to be recorded and automatically saves the recording To make a recording gt With the display in standby press gt Scroll to Recorder and press B gt Scroll to Record and press S gt To stop the recording press You can also use this feature during a call in progress gt Press and hold o to begin recording gt To end the recording press All tape recordings are stored and numbered Two options are available for the recordings Play and Delete Copyright 2005 Nokia All rights reserved Play You can play a selected recording To view the list of recordings and select one to play gt With the display in standby press gt Scroll to Recorder and press S to view the list of recordings gt Scroll to the desired recording in the list and press S gt Scroll to Play and press S9 T
51. nadvertently Do not smoke when working on the car Make sure that there is no source of fire or flame nearby Take care not to cause damage to electrical cables fuel or brake lines or safety equipment during installation work Make sure not to impact the steering or braking systems or other key systems essential for proper operation of the car when installing car phone equipment Check to make sure that deployment of the airbag is not blocked or impaired in any way RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles for example electronic fuel injection systems electronic anti skid braking systems electronic speed control systems airbag systems Should you note a fault or change in the operation of such a system contact your car dealer Only use the car phone at an operating voltage of 12 V with the minus pole earthed Failure to observe this requirement may result in damage to the car s electronics system Copyright 2005 Nokia All rights reserved Safety first e Do not operate your car phone off the car battery for a longer period of time that is with the engine switched off as this may cause your battery to run dry e In order to comply with RF exposure requirements for mobile transmitting devices a minimum separation distance of 20 cm must be maintained between the antenna and all persons Mounting Car phone equipment and cable connections 57 Mo
52. network network service GPRS as such is a data bearer that enables wireless access to data networks such as the Internet The applications that may use GPRS are WAP SMS messaging and the GPRS dial up Before you can use GPRS technology you must subscribe to the GPRS service For details on the availability of and subscription to the GPRS service contact your network operator or service provider For further information see GPRS modem settings network service on page 39 53 HSCSD High Speed Circuit Switched Data HSCSD High Speed Circuit Switched Data The car phone enables you to use GSM high speed data services network service You can use high speed functionality when your car phone is connected to a compatible computer by means of an RS232 cable or Bluetooth wireless technology and when the modem drivers supporting high speed data software are installed on the computer and selected as an active modem For information on the availability of and subscription to high speed data services please contact your network operator or service provider Reference information Cellular transmission Your car phone employs the data transmission capabilities of the GSM network to send faxes text messages and e mail as well as to establish connections with remote computers network services 54 GSM data capabilities of your car phone We recommend that you move the car to a location where the strongest possible c
53. ngaged in an active call The first call is placed on hold gt Press N to end a currently active call and to return to the call on hold Copyright 2005 Nokia All rights reserved Speed dialling The speed dialling option is a convenient shortcut function that lets you dial a phone number assigned to a number key quickly and easily To activate or deactivate speed dialling select Settings gt Call settings gt Speed dialling gt On or Off For further information see Speed dialling on page 33 Phone settings You can define various basic settings for your car phone Language This option lets you select the language for display texts To set the display text language gt With the display in standby press Scroll to Settings and press Scroll to Phone settings and press S Scroll to Language and press A Scroll to the desired language and press vvv v If you select Automatic the car phone selects the language according to the information stored on the SIM card Copyright 2005 Nokia All rights reserved Settings Display backlighting You can adjust the brightness of the display backlighting for better viewing comfort To adjust the backlighting gt With the display in standby press gt Scroll to Settings and press S gt Scroll to Phone settings and press S gt Scroll to Backlight settings and press gt Scroll to the desired backlighting setting and pr
54. o instead please ask the service technician who is to install your car phone for professional assistance as the car phone may not be compatible with your system Microphone HFM 8 The handsfree microphone supplied in the sales package has been tailormade for the vehicular environment State of the art technologies geared for effective echo and noise suppression in automotive systems enable quality results even in poor conditions Selecting a suitable mounting location may also enhance the performance of the device See Installation on page 56 Overview of the car phone and equipment 6 System cables PCU 4 A set of cables is included for connection to the power supply and the ignition system and to mute the radio 7 GSM antenna not included in the sales package Connecting the radio unit to a compatible external GSM antenna will allow optimum wireless performance of the car phone 8 RS232 cable AD 3 An RS232 adapter cable provides a convenient way to connect your car phone to the serial port of a compatible laptop computer Car phone equipment and cable connections Special features For enhanced safety and operating comfort of wireless communication in the vehicular environment this car phone is equipped with a variety of special features tailored for automotive applications A number of these extras are sketched below Voice dialling e amp You can make a phone call by saying a Speak now voice tag you a
55. o unit TFE 4R e Display XDW 1R Handset HSU 4 e Loudspeaker SP 2 Microphone HFM 8 e System cable PCU 4 e RS232 adapter cable AD 3 Copyright 2005 Nokia All rights reserved 9 Care and maintenance Your car phone is a product of superior design and craftsmanship and should be treated with care The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years Keep the car phone and all its parts and accessories out of the reach of small children Keep the car phone dry Precipitation humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits Do not use or store the car phone in dusty dirty areas Its moving parts can be damaged Do not store the car phone in hot areas High temperatures can shorten the life of electronic devices damage batteries and warp or melt certain plastics Do not store the car phone in cold areas When it warms up to its normal temperature moisture can form inside which may damage electronic circuit boards Do not attempt to open the car phone Non expert handling may damage it Do not drop knock or shake the car phone Rough handling can break internal circuit boards Do not use harsh chemicals cleaning solvents or strong detergents to clean the car phone Do not paint the car phone Paint can clog the moving parts and prevent proper operation Copyright 2005 Nokia All rights res
56. ovider For further information see GPRS General Packet Radio Service on page 53 GSM GSM the Global System for Mobile Communication is the technical standard for mobile radio networks HSCSD HSCSD High Speed Circuit Switched Data makes data connections faster for attractive GSM data services For further information see HSCSD High Speed Circuit Switched Data on page 54 IMEI The IMEI is the serial number of your device and is supplied with the car phone Copyright 2005 Nokia All rights reserved Glossary PIN code The PIN Personal Identification Number is a 4 to 8 digit code that protects your SIM card from unauthorised use The PIN code is supplied with the SIM card For further information see Access codes required for the SIM card on page 11 PUK code The PUK Personal Unblocking Key is an 8 digit code that is required to change a disabled PIN code The PUK code is supplied with the SIM card If you lose the code or it has not been provided with the SIM card contact your network operator SIM card The SIM Subscriber Identity Module card contains all the information the cellular network needs to identify the network user The SIM card also contains security related data SMS The network service SMS Short Message Service allows you to send short text messages of up to 160 characters to mobile phones and to receive short text messages from other mobile users if this service is enab
57. phone memory Follow the instructions shown on the display gt With the display in standby press D gt Scroll to User data and press gt Scroll to Download contacts and press User data Paired devices with Bluetooth technology gt Scroll to the compatible mobile phone with Bluetooth technology the name is displayed in the list of paired devices whose contacts you wish to download using the wireless Bluetooth connection to the car phone memory gt Press V to begin copying the entries rs Note You can deactivate the option Request authorisation in the compatible mobile phone so that connections between the devices using Bluetooth wireless technology can conveniently be made automatically without separate acceptance or authorization To do so scroll to the menu item View paired devices select Request authorisation and set it to Off For further information see the user guide applicable for the compatible mobile phone with Bluetooth technology that you are using SIM card P Press S to copy the contacts from the SIM card inserted in the radio unit to the car phone memory Search for devices that support Bluetooth technology gt Scroll to Search for Bluetooth devs and press if you wish to carry out the download from a device that is not paired with the car phone 51 Copyright 2005 Nokia All rights reserved User data Change user You can save two user profiles in your car phone The
58. purpose are made in relation to the accuracy reliability or contents of this document Nokia reserves the right to revise this document or withdraw it at any time without prior notice The availability of particular products and services may vary by region Please check with the Nokia dealer nearest to you Export Controls This device may contain commodities technology or software subject to export laws and regulations from the US and other countries Diversion contrary to law is prohibited 9356656 Issue 3 Table of content For your safety o cise tie wu ew wae oe RR GR RE Da 5 General informatio ur ack d catenins 6 aa ii Overview of the car phone and equipment 7 Before putting your phone into operation 11 Stickers in the sales package 11 Access codes required for the SIM card 11 Your car PHONE aa aa da akaxa d kd kw RR Endo 12 Display 2sisnssi e hee xx RE 12 Display indicators 0 c eee eee eee 12 Basic components of the handset 14 Betting started 223 deca waa eae maa wane 16 Installing the SIM card 004 16 Switching on off and off mode 17 Call TUNGUONS i e ac rr ur arr o rms 18 Voice dialling cc cece cece ee eee eee 18 Calling a contact name search 18 Rediallifig ce nn that emet tee Ra 19 Copyright 2005 Nokia All rights reserved Table of content Making a call using the keypad 19 Using the Navi w
59. right 2005 Nokia All rights reserved View paired devices You can view a list of Bluetooth wireless technology paired devices to create a connection to a paired device or to edit the list of paired devices gt With the display in standby press gt Scroll to Bluetooth and press 8 gt Scroll to the item View paired devices and press to open the list of paired devices gt Scroll to the desired device and press gt Scroll to the desired option and press amp gt Follow the instructions on the display This function calls up a list of all paired devices with Bluetooth technology The last pairing is listed at the top Some of the options below may be available depending on the status of the device or the connection Create connection This option establishes a wireless connection to a paired device with Bluetooth technology Delete pairing This option removes a device from the list of paired devices with Bluetooth technology Copyright 2005 Nokia All rights reserved Bluetooth wireless technology Request authorisation You can define whether the connection from the paired device is established automatically No or whether the car phone asks for authorization before pairing when the device to be paired comes within Bluetooth range of the car phone Yes Edit Bluetooth name This option changes the name of the device with Bluetooth technology that is paired with your car phone Wit
60. rk service on page 35 The home zone service is active network service You may enter numbers Turn the Navi wheel to the left You may speak now Turn the Navi wheel to the right You may enter letters Shows that roaming is active The network has deactivated the encryption function The ringing tone is switched off Bluetooth wireless technology is activated see Bluetooth wireless technology on page 47 User profile 1 is in use See Download contacts on page 51 User profile 2 is in use See Download contacts on page 51 Copyright 2005 Nokia All rights reserved Call indicators Indicates an active voice call Indicates that a voice call has been disconnected Voice calls have been switched over to the headset m Data communication is active Fax communication is active A GPRS connection has been established The call is on hold Sat General indicators T Indicates a manual network search Indicates unread text messages If this indicator is flashing the memory is full Indicates a business card is being forwarded This setting is active Headset volume can be adjusted Ringing tone volume can be adjusted Loudspeaker volume can be adjusted Daytime display is active Nighttime display is active ARB ERIT Au A Copyright 2005 Nokia All rights reserved Display indicators Indicators for recorder functions E P Recorder function is on The tape is being played
61. rvice providers may allow you to switch off the prompt requesting you to enter the PIN at power on PIN2 code 4 8 digits The PIN2 code may be supplied with the SIM card and is required to access some functions PUK and PUK2 codes 8 digits The PUK Personal Unblocking Key code is required to change a blocked PIN code The PUK2 code is required to change a blocked PIN2 code Note If these codes have not been supplied with your SIM card please contact your service provider Your car phone 2 Your car phone Display When the car phone is ready for use and no characters have as yet been S entered the standby display as depicted in the figure is shown In addition the logo of the network operator is shown If you wish to activate a function e using a voice tag you will first have Speak now to call the voice display To do sa MENU from the standby display press To adjust the display brightness to optimise performance see Display backlighting on page 37 Display indicators The indicators described below may be shown on the display F CM 123A A of 3 8 4 ey c amp m s BDEVOaeD L Q Shows the signal strength of the cellular network at the current location The higher the bar the stronger the signal Indicates an ongoing call You have received one or more text messages Indicates unread text messages The call diverting feature is on network service See Call divert netwo
62. s feature illegally P Press and hold to begin recording during a phone call gt Press V to stop recording For further information see Recorder on page 46 gt Press V during an active call gt Scroll to the desired option and press gt Follow the instructions shown on the display Copyright 2005 Nokia All rights reserved 5 Using the menu The Nokia 810 car phone offers you an extensive range of functions which are grouped in menus Accessing a menu function To access the menu from the standby display press the Navi wheel S You can then navigate the menu using the following keys Turn the Navi wheel to the left to scroll down through a list of functions Turn the Navi wheel to the right to scroll up through a list of functions Press the Navi wheel to select a desired option Press this key to delete an entry made Or press this key to return to the previous menu level see the list of menu functions Press and hold this key to clear the display JC OQ Copyright 2005 Nokia All rights reserved Using the menu List of menu functions E Messages Create message Send Clear text Use template Save as template Inbox Call Reply Forward Save as template Delete Sent messages Open Details Delete Message settings Message centre number Reply via same centre View templates Send Delete 23 List of menu functions
63. save it To erase a character incorrectly selected press N vv 31 Copyright 2005 Nokia All rights reserved Contacts Edit names and phone numbers You can edit names and phone numbers in the contacts With the display in standby press gt Scroll to Contacts and press gt Scroll to Edit contact and press S Scroll to the first letter of the desired name and press S9 to view the list of entries starting with this letter Scroll to the desired contact and press gt You can now edit the entry Scroll to the letter or number to be changed and make the desired changes P To save any changes made press S v Delete contact entries You can delete one or more names and the related numbers from the contacts gt With the display in standby press Scroll to Contacts and press P to open the contacts Scroll to Delete and press S5 Scroll to the desired option and press vvv yv Follow the instructions shown on the display 32 Add a phone number You can add up to four additional phone numbers to an entry in the contacts The first number saved under a name is automatically set as the default number and is indicated with uk General Other number types are Rd Mobile gi Home il Office and G4 Fax gt With the display in standby press Scroll to Contacts and press G to open the contacts Scroll to Add number and press D Scroll to the desire
64. ssigned to a contact You M menu can assign voice tags to up to 12 contacts To make a voice call from the standby display just press the key on the handset and speak the desired voice tag PN Note To be able to voice dial a contact you must record a voice tag for the number stored in the car phone For further information see Voice dialling on page 18 and Voice on page 43 Voice commands F e amp You have a selection of phone functions Speak now which can be activated by saying a voice Y Ment command As many as three voice tags for the voice commands can be added You can activate the voice command in the same way as making a call by using a voice tag From the standby display press the 9 key on the handset and speak the voice command for the desired function Copyright 2005 Nokia All rights reserved rs Note To be able to use a voice command to activate a desired function you must record a voice tag for this function in the car phone For further information see Voice commands on page 44 Voice recorder Recording allowing you to record personal voice Ero memos You can record up to 10 voice memos that last a total oft three minutes To start recording from the standby display press and hold the key on the handset To play a recorded speech memo select the option Play in the record menu F amp This feature acts as a dictaphone l i Copying contact entries from your mobile p
65. st from the standby display gt Press Q gt Scroll to the desired entry and press S gt Follow the instructions shown on the display gt Press Z to dial the number Copyright 2005 Nokia All rights reserved Call waiting Call waiting F r E 123456789 1 I3 987654321 amp If Call waiting network service is activated you are notified of any incoming call while you have another call in progress This feature allows you to accept this call To use the call waiting function in your car phone you must first activate it gt vvv v With the display in standby press S Scroll to Settings and press A Scroll to Call settings and press Scroll to Call waiting and press amp Scroll to the desired setting and press S Select from the following options 20 Activate This option activates the call waiting service Cancel This option deactivates the call waiting service Check status This option lets you know whether this service is currently active for your car phone Press f to accept an incoming call while you are engaged in an active call The first call is placed on hold Press 4 to end a currently active call and return to the call on hold Press f to switch between the active call and the call on hold The other call is placed on hold Press X to end a currently active call For further information see Call waiting network service on page 36 Copyri
66. t e You must say the command exactly as you said it when you recorded it e Very short commands are not accepted Use long commands and avoid similar commands for different functions You can use a shortcut to access the list of voice commands direct from the standby display gt Press and scroll left gt You can now view the list of Voice commands gt Follow the instructions on the display Execute a voice command PN Note When an application using the GPRS connection sends or receives data you cannot execute a voice command To do so you must first end the application using the GPRS connection H D 8 Speak now To execute a voice command Y MENU 45 Recorder gt Press o Speak now is displayed P Say the voice command loudly and clearly Your car phone plays the voice command and automatically performs the function assigned to it Recorder 8 i d Recorder The tape recorder feature allows you to record pieces of speech sounds or an active phone call This is especially useful if you need to note information during a call For example you can record a name or a number to be written down later Warning Obey all local laws governing recording of calls Do not use this feature illegally You can make up to 10 recordings as long as you do not exceed an overall recording time of three minutes Each recording is saved together with the running number and the length and time of the ca
67. t message For further information see Alphanumeric keypad on page 15 gt When you have finished writing your message press P Select from the following options Send To send text messages gt Scroll to Send and press P Select the phone number of the recipient from the contacts or enter the desired number gt To send the message press Clear text To delete entered text scroll to Delete and press S Copyright 2005 Nokia All rights reserved Use template You can reply to a text message using a template To view the list of templates gt With the display in standby press V gt Scroll to Messages and press gt Scroll to View templates and press to view the list gt Scroll through the list of templates and press S to select the desired template gt Press to confirm the selection Save as template This convenient option lets you save a received text message as a template To use the template select Reply with template to view the list and send the message gt Scroll to Save as template and press A Copyright 2005 Nokia All rights reserved Messages Inbox E amp When you have received a text message i ag the E indicator and the number of y Inbox new messages are shown on the display along with the notification New msgs received Text messages sent to your car phone are shown in the order in which they are received Unread text messag
68. t up a new GPRS access point or to change an existing one press S again 39 Settings gt Press 5 to open the option Edit access point and enter the alphanumeric characters of the GPRS access point using the Navi wheel text editor gt To save the name of the access point press OK in the Navi wheel text editor or press 7 gt If you have made a mistake in selecting a character press to delete it Press and hold this key if you wish to erase the complete entry For further information and to download modem driver software for your computer or laptop computer visit the Nokia Web site at www nokia com support GPRS charges You may be charged for GPRS data transmission or for an application that uses GPRS For details of charges contact your network operator or service provider 40 Security settings A Caution For some security settings for example when calls are restricted to closed user groups or fixed dialling numbers calls still may be possible to the official emergency number programmed into your device PIN code request Use this option to set the car phone to ask for the PIN code of the car SIM card installed in the radio unit whenever the phone is switched on Remember that some providers do not allow the PIN code request function to be deactivated Change PIN code This option lets you change the PIN code of the car SIM card installed in the radio unit of your car phone Remember that t
69. tch off the car s ignition before inserting the SIM card gt Carefully insert the SIM card into the holder 5 Make sure that the SIM card is inserted properly and that the golden contact area on the card is facing you gt Gently press the catch on the radio unit casing 1 to open and lift the cover 2 gt Push the SIM card holder down into its original position and lock it into place by sliding it in the direction indicated by the arrow Close the cover of the radio unit and check to make sure it catches Copyright 2005 Nokia All rights reserved Switching on off and off mode Caution If wireless phone use is prohibited or when it may cause interference or danger switch your car phone over to off mode The car phone is then deactivated even if the car ignition is on Switching on the phone To switch on your car phone simply turn the ignition key Your car phone is connected to the ignition system so that turning the ignition on automatically switches your car phone on If the message SIM rejected is shown on the display although checking the SIM card has shown that the SIM is properly inserted please contact your network operator or service provider for assistance If you are requested to enter your PIN code enter the PIN code displayed as Press S to confirm the PIN For further information see Change PIN code on page 40 After you have entered the correct PIN the car phone automatic
70. ters have been assigned to each key To enter a character repeatedly press the related key until you have reached the desired character Entering numbers and characters gt To enter a number press and hold the number key for approximately one second gt To enter special characters repeatedly press YA gt Toentera blank space press W gt To switch between upper and lower case characters press p gt Use the Navi wheel to move the cursor in the entered text For example if you wish to enter the letter C press w three times When the flashing cursor appears to the right of the letter entered you can select the next character to be entered Repeat these steps until you have completed your entry Note The procedure set out above applies only for entering text Caution When you have finished using the handset make sure that it is placed securely in the cradle A loose handset may cause bodily injury if you have to brake sharply or should have an accident 15 Getting started 3 Getting sta rted gt Slide the SIM card holder 3 as shown to unlock it Installing the SIM card A Caution Keep all miniature SIM cards out of the reach of small children gt Open the SIM card holder by lifting it upwards on one side as rs Note depicted in figure 4 The SIM card and its contacts can easily be damaged by scratches or bending so be careful when handling inserting or removing the card gt Swi
71. th the display in standby press S Scroll to Settings and press VY Scroll to Voice mailbox and press A Scroll to Voice mailbox number and press gt Use the Navi wheel number editor to enter the number If you select an incorrect number press v to delete it vvvvvvy To save the number press OK in the Navi wheel number editor or press 7 Note Press and hold S to dial your voice mailbox direct Copyright 2005 Nokia All rights reserved Settings Listen to voice messages To listen to voice messages With the display in standby press gt Scroll to Settings and press amp Scroll to Voice mailbox and press B Scroll to Listen to voice messages and press GPRS modem settings network service You can use your car phone as a modem to enable GPRS connectivity Note however that you need a GPRS access point to do so Contact your network operator or service provider for information To use GPRS You must subscribe to the GPRS service of your network operator or service provider For the relevant information on the availability of GPRS and the necessary settings contact your network operator or service provider You must save the settings required to use GPRS applications to your car phone To set up a GPRS access point gt gt gt gt With the display in standby press SA Scroll to Settings and press Scroll to GPRS modem and press S To se
72. tically answer incoming calls after the first ring whenever your car phone is on and off mode is not active You can switch this feature on or off as desired A Caution If you activate this feature you should make sure that the ringing tone is set sufficiently loud to make you aware of an incoming call Otherwise you may run the risk of a caller listening in on conversations carried on in the car To activate the automatic answer feature gt With the display in standby press S Scroll to Settings and press Scroll to Call settings and press D Scroll to Automatic answer and press B Scroll to On or Off and press S to select the desired setting vvv v 36 Call waiting network service If the Call waiting feature is activated you are notified of any incoming call while you have another call in progress This feature allows you to accept this call To activate call waiting gt With the display in standby press V Scroll to Settings and press Scroll to Call settings and press B Scroll to Call waiting and press amp amp Scroll to the desired setting and press vvv y Select from the following options e Activate This option activates the call waiting service e Cancel This option deactivates the call waiting service Check status This option lets you know whether this service is currently active for your car phone gt Press to accept an incoming call while you are e
73. tions of Wireless Technology Research If you have any reason to suspect that interference is taking place switch your car phone over to off mode immediately 62 Potentially explosive atmospheres Switch your car phone over to off mode see Off mode on page 17 when in any area with a potentially explosive atmosphere and obey all signs and instructions Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death Users are advised not to use the car phone when at a refuelling point Remember to observe the restrictions on the use of radio equipment in fuel depots fuel storage and distribution areas chemical plants or where blasting operations are in progress Areas with a potentially explosive atmosphere are often but not always clearly marked They include below deck on boats chemical transfer or storage facilities vehicles using liquified petroleum gas such as propane or butane areas where the air contains chemicals or particles such as grain dust or metal powders and any other area where you would normally be advised to turn off your vehicle engine Vehicles Only qualified personnel should service the car phone or install the car phone in a vehicle Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly Do not store or carry fl
74. tore up to 1000 names in the car phone memory with up to five numbers for each name rs Note If the number of contact entries you try to copy from the memory of a compatible mobile phone using Bluetooth wireless technology exceeds the available space in the car phone memory not all of the entries are copied When you select a name from the contact entries for example to make a call the general number is used by default unless you select another number Search for names and numbers You can access the list of names and phone numbers quickly from the standby display gt Scroll right to the first letter of the desired name and press Contacts gt You can now view all the names stored in your contacts list that start with the letter selected They are listed in alphabetical order Scroll to the desired name in the list To make a call to this person press To cancel dialling or to end the call press To return to the standby display press 4 For further information see Calling a contact name search on page 18 vvv yv Add a name Names and phone numbers are stored in the contacts To add a name and the related number to your contacts gt With the display in standby press gt Scroll to Contacts and press amp gt Scroll right to Add contact and press 5 Enter the name with the alphanumeric keys and press amp to save it Enter the corresponding number and press S to
75. unting Radio unit TFE 4R Pos 1 It is recommended to mount the radio unit TFE 4R at a less visible position in the car interior However ensure that the unit is installed to permit easy access to the SIM card so that it can be changed if necessary and make sure that the cables for the microphone and loudspeaker will reach the places you intend to mount these components rs Note When installing the radio unit make sure to mount the bracket in such a way that the unit slides into place towards the front of the car or is mounted sideways Otherwise the unit may break loose if you have an accident and cause injury or damage Installing the radio unit in the car 58 Display XDW 1R Pos 2 The mount for the display unit is to be fixed to the dashboard or to any other location in the cockpit area where the display is clearly visible for the user but does not impair control or operation of the vehicle If you have any questions about installing your car phone please ask your service technician who will be glad to provide you with information on the most suitable mount for the display unit in your vehicle Some mounting systems do not require boreholes Remember that all equipment must be mounted so that it does not interfere with the operation of the vehicle Handset HSU 4 Pos 3 The handset comes with a mount that is to be fixed in a suitable location where it is easily accessible for the user Ho
76. wever take particular care to ensure that the handset will not interfere with the driver s operation of the vehicle Make sure that the cable will reach to the radio unit for connection The best location to mount the handset is horizontally on the console between the driver s and front passenger s seats Loudspeaker SP 2 Pos 4 To ensure good acoustic quality mount the loudspeaker so that it is pointed in the user s direction It is recommended that you mount the loudspeaker a minimum distance of one metre away from the microphone to avoid feedback Copyright 2005 Nokia All rights reserved Microphone HFM 8 Pos 5 rs Note Use only the HFM 8 microphone that comes with your car phone Use of any other microphone such as any device which may already be installed in the car may affect the operation of the phone for example due to noise Mount the handsfree microphone approx 30 cm from the user s head and position it so that it points towards the user s mouth Experience has shown that the best locations are near the rearview mirror or to the left of the sun visor Check to make sure the microphone does not impair control or operation of the vehicle We recommend that you keep the microphone a minimum distance of one metre away from the car phone loudspeaker to avoid feedback Take care to mount the microphone so that it is not exposed to air streams from the vents Do not lay the microphone cable in the heating ventilation

Nokia 9356656 Cell Phone User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents