Linksys BEFCMU10 Network Router User Manual
Contents
1. USB Cable Modem Windows has bound new hardware and is locating the softwares hor it 2 Insert the Setup Utility CD into your CD ROM drive When Windows asks you for the location of the best driver select Automatic search for a better driver Recommended and click the Next button Add Hew Hardware Wizard 4 Mons haa bound the lollomang ne handiene USE Cable Modem irons can automaticaly search bor and install soften hed supports pour hadhara IF pour harcerane came raih insteliston meds meen now snd chck Meat Wiha would you like Indo FF domaie phech bor beter dre Recommended Specdy the location of the drives Advanced 3 Windows will begin installing the driver for the modem At this point the installation may require files from your Windows Millennium CD ROM If prompted insert your Windows Millennium CD ROM into your CD ROM drive and enter d win9x in the box that appears where d is the letter of your CD ROM drive If you were not supplied with a Windows 98 CD ROM your Windows files may have been placed on your hard drive by your computer manufacturer While the location of these files may vary EtherFast Cable Modem with USB and Ethernet Connection many manufacturers use c windows options install as the path Try enter ing this path into the box If no files are found check your computer s doc umentation or contact your computer manufacturer for more information 4 When2. You may be using the wrong power supply Check that the power supply you are using is the one that came with your Cable Modem 19 Instant Broadband Series Appendix Installing the TCP IP Protocol Follow these instructions to install the TCP IP Protocol on one of your PCs only after a network card has been successfully installed inside the PC These instructions are for Windows 95 98 or Milliennium For TCP IP setup under Microsoft Windows NT or 2000 please refer to your Microsoft Windows NT or 2000 manual 1 Click the Start button Choose Settings then Control Panel Hetercak HEI Corfiguation iderticstion Acces Conte 2 Double click the The log Paleo components are iriad Network icon E Chart for Mise Networks Your Network D iLirkops LME TOOTH Fat Elon Adapter window should IPSS Pe compalible Protocol pop up If there is HetBELI a line called TCP IP for your Ethernet Adapter already listed there is no need Fame Network Logor to do anything Chert tes Mito etek else If there is noenyfor PAA TCP IP select the Daserpii Configuration tab 3 Click the Add button 4 Double click Protocol 5 Highlight Microsoft under the list of manufacturers 20 FtherFast Cable Modem with USB and Ethemet Connection 6 Find and double click TOPE in the the list to the right below Bekon Hereni Proteesi Dick es Riha Aroon hast pou saani ba metall khan obok DDC ri pos bane y
3. Cable Modem with USB and Ethernet Connection Connecting the Cable Modem with USB to Your PC 1 N W un Make sure that you have TCP IP installed on your computer If you don t know what TCP IP is or you don t have it installed refer to the section in the Appendix called Installing the TCP IP Protocol Connect the coaxial cable from your Internet Service Provider Cable Company to the Cable Port on the back of the Cable Modem The other end of the coaxial cable should be connected in the manner proscribed by your Internet Service Provider Cable Company Connect a UTP Category 5 or better Ethernet cable to the Ethernet Port on the back of the Cable Modem Connect the other end of the cable to the RJ 45 port on your computer s Ethernet adapter or your hub switch router With your PC turned off connect the power adapter included in your package to the Power Port on the back of the Cable Modem Plug the power cord into the power adapter Plug the other end of the power cord into a stan dard electrical wall socket The Power LED on the front of the Cable Modem should light up and remain on Contact your Cable Internet Service Provider to activate your account Usually your Cable Internet Service Provider will need what is called a MAC Address for your Cable Modem in order to set up your account The MAC address is printed on a bar code label on the bottom of the Cable Modem Once you have given them this
4. Windows finishes installing the driver click Finish Add Hew Hardware wizard 5 When asked if you want to restart your PC remove all disks and click Yes If Windows does not ask you to restart your PC click the Start button choose Shut Down choose Restart then click Yes System Selling Change gt To finish setting up your new hardware you must restait pour Do you wank to restart your compuber now The Windows Millennium driver installation is complete Return to the section on Connecting Using the USB Port to finish the set up 13 Instant Broadband Series Installing the USB Driver for Windows 2000 1 Insert the Setup Utility CD into the CD ROM drive Windows will notify you that it has detected new hardware Found New Hardware USE Cable Modem 2 When the Found New Hardware Wizard screen appears to confirm that the USB Modem has been identified by your PC make sure the Setup Utility CD is in the CD ROM drive and click Next Found See Hondeere Mira Won fo lhe Found Mwy Hardware Wiraind Tes rec hipe sci ahal ah rbaa chris bee ds hadas darane Te onime bok Mai Di a 14 EtherFast Cable Modem with USB and Ethernet Connection 3 Select Search for a suitable driver for my device and click the Next but ton inatall Maries Device nvan dia dram DE lie ce hisdem dirot bo mxh vh grey be Ts miel pall oanp ihe mahalaga loi Des a Gp LISA Cab
5. directly to any USB ready PC just plug it in and you re Installing the USB Driver for Windows Millennium 12 ready to surf the Internet Or connect it to your LAN using a Linksys router and Installing the USB Driver for Windows 2000 14 share that speed with everyone on your network Troubleshooting 18 So if you re ready to enjoy broadband Internet speed then you re ready for the Common Problems and Solutions 18 EtherFast Cable Modem with USB and Ethernet Connection from Linksys It s the Appendix 20 easiest and most affordable way to harness the full potential of the Internet Renewing Your PC s IP Address 22 e Ethernet or USB Interface for Easy Installation Specifications 25 Environmental 25 e Up to 42 88 Mbps Downstream and Up to 10 24 Mbps Upstream Two way Cable Modem Warranty Information 26 e Remote Monitoring using SNMP Allows Your MSO Cable Internet Service Provider Access to Your Cable Modem Across the Internet Contact Information 27 e Vertical Footprint Makes Positioning an Ease e Clear LED Display e Free Technical Support 24 Hours a Day 7 Days a Week for North America Only e 1 Year Limited Warranty UG USBDSL1 01220A DG Instant Broadband Series Package Contents Qe oa e One EtherFast Cable Modem with USB and Ethernet Connection e One AC Adapter e One Power Cord e One USB Cable e One Setup Utility CD e Electronic User Guide on Setup Utility CD e One Registration Card Syst
6. dn irci aan dek ka Pi Serica ciei Hire Diak a Fac infeed Prima PSPs competi Poston JT Woes Es DT Micreen DLC Mhair LA Else erk OCE ces 7 After a few seconds you will be brought back to the main Network win dow The TCP IP Protocol should now be listed Configuration iecifcation Astaat Cons The ons Geet Goats dit died 23 Chet for ice sort hasta te Lrt LAE TOOT Fat Ether chaques q Smale Frac He El ee Panes Haart Logor Cent fo Miceanoft Henke Eis srd Print Semen Desc TERAP ir the gaton pou ure bo monic bo thes hieme and rhe d ai etree OF Cancel Click OK Windows may ask for original Windows installation files Supply them as needed 1 e D win98 D win95 c windows options cabs oo 9 Windows will ask you to restart the PC Click Yes The TCP IP Installation is complete 21 Instant Broadband Series Renewing Your PC s IP Address Occsionally your PC may fail to renew its IP address which will keep it from connecting to your Cable Internet Service Provider When this happens you will not be able to access the Internet through your Cable Modem This is fair ly normal and does not indicate a problem with your hardware The procedure to correct this situation is simple Follow these steps to renew your PC s IP address For Windows 95 98 or Millennium users 1 From your Windows 95 98 or Millennium desktop click the Start button poin
7. drivers for then turn to page Windows 98 a ae Windows Millennium 4 Contact your Cable Internet Service Provider to activate your account Usually your Cable Internet Service Provider will need what is called a MAC Address for your Cable Modem in order to set up your account The MAC address is printed on a bar code label on the bottom of the Cable Modem Once you have given them this number your Cable Internet Service Provider should be able to activate your account a EtherFast Cable Modem with USB and Ethernet Connection Installing the USB Driver for Windows 98 1 When the Add New Hardware Wizard window appears insert the Setup Utility CD into your CD ROM drive and click Next Add Hew Hida Wizard This warani semchess for mea deers how USE Cargote Dek desc diver tt Havane pioa yi ali 5 hache device vaak 2 Select Search for the best driver for your device and click the Next but ton Add Hew Hardware wizard lal do po er Wickets bo di Dies a k pl al the diees be peche ioca 20 pou Can Hihii Ha drhti you saan Instant Broadband Series 3 Select CD ROM drive as the location where Windows will search for the driver software and click the Next button D Hina Windows Update Spd a bosin 4 Windows will notify you that it has identified the appropriate driver and is ready to install it Click the Next button Feo onmenden EtheFast Cabia Modem win LGB O
8. si ae Slams el sohaare har been sbaed since K was bebed The solvate jou d abou bo inalall det rai parikan a Misco digital signaue Thenelone thame k mo ee E E Etes Cable Modem vath USE It pou want io peach hor Microsoft digialg sigeead colhware whi the Windows Updale feb site at hic Vwandownupdale microsoft oom bo mee one ia sable Do gow erent j comtinus the raal oe e ee 16 EtherFast Cable Modem with USB and Ethernet Connection 7 When Windows has completed installing the driver click Finish Prind san biintiaare Wiorard Completing the Found Mow Hardware Wizard Ethe pat Cable locatif LISE Wordleen han inetd molak the rarat foe then den Tre cher thee vien chek Finch J The Windows 2000 driver installation is complete Return to the section on Connecting Using the USB Port to finish the set up 17 Instant Broadband Series Troubleshooting Common Problems and Solutions This section offers solutions to common issues that may occur during the installation and operation of your Cable Modem with USB and Ethernet Connection I cannot access my e mail or Internet service Make sure all of your connections are secure Your Ethernet cable should be inserted completely into both the network card on the back of your computer and the port on the back of your Cable Modem If you installed your Cable Modem using a USB port check the connection of the USB cable to both device
9. EtherFast Cable Modem L e this guide to install the following Model No BEFOMULO gt LINKSYS COPYRIGHT amp TRADEMARKS Copyright 2001 Linksys All Rights Reserved Instant Broadband is a registered trade mark of Linksys Microsoft Windows and the Windows logo are registered trademarks of Microsoft Corporation All other trademarks and brand names are the property of their respective proprietors LIMITED WARRANTY Linksys guarantees that every Instant Broadband EtherFast Cable Modem with USB is free from physical defects in material and workmanship under normal use for one year from the date of purchase If the product proves defective during this warranty period call Linksys Customer Support in order to obtain a Return Authorization Number BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PROD UCTS PACKAGING ON HAND WHEN CALLING RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE When returning a product mark the Return Authorization Number clearly on the outside of the package and include your original proof of purchase All customers located outside of the United States of America and Canada shall be held responsible for shipping and handling charges IN NO EVENT SHALL LINKSYS LIABILITY EXCEED THE PRICE PAID FOR THE PROD UCT FROM DIRECT INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAM AGES RESULTING FROM THE USE OF THE PRODUCT ITS ACCOMPANYING SOFT WARE OR ITS DOCUMENTATI
10. ON LINKSYS DOES NOT OFFER REFUNDS FOR ANY PRODUCT Linksys makes no warranty or representation expressed implied or statuto ry with respect to its products or the contents or use of this documentation and all accompanying software and specifically disclaims its quality performance mer chantability or fitness for any particular purpose Linksys reserves the right to revise or update its products software or documentation without obligation to notify any individ ual or entity Please direct all inquiries to Linksys P O Box 18558 Irvine CA 92623 FCC STATEMENT This product has been tested and complies with the specifications for a Class B digital device pursuant to Part 15 of the FCC Rules These rules are designed to provide rea sonable protection against harmful interference in a residential installation This equip ment generates uses and can radiate radio frequency energy and if not installed and used according to the instructions may cause harmful interference to radio communi cations However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which is found by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment or device Connect
11. apable of connecting at such high speeds so a more realistic number is 1 to 3 Mbps In the upstream direction from computer to network speeds can be up to 10 Mbps However most modem producers have selected a more optimum speed between 500 Kbps and 2 5 Mbps Some service providers limit upstream access speeds to 256 Kbps or less Check with your Cable Internet Service Provider for more information about upload upstream and download downstream access speeds for more specific information In addition to speed there s no need to dial in to an Internet service provider ISP when you are using your Cable Modem Simply click on your browser and you re on the Internet No more waiting no more busy signals Instant Broadband Series The Rear Panel Cable Port The cable from your Internet Service Provider connects here It is a round coaxial cable exactly like the one that connects to the back of your cable box if you have one or like the one that probably connects your VCR to your tel evision USB Port This port allows you to connect your Cable Modem to your PC using the included USB cable Not all computers are able to use USB connections For more information concerning USB and compatibility with your computer see the next section Ethernet Port This port allows you to connect your Cable Modem to your PC or other Ethernet network device using a UTP Category 5 or better network cable Reset Button Briefly pr
12. e is no USB Support on PCs run ning Windows 95 or Windows NT The Front Panel Power Activity Cable Status Instant Broadband Series Green When this LED is on it indi cates that the Cable Modem is correctly supplied with power The LED should remain lighted constantly Green When this LED is on it indi cates that the Cable Modem is properly connected to your PC or other Ethernet device either through the USB or Ethernet Port on the back of the Cable Modem The LED flashes when data is being transmitted to or from your PC or other Ethernet device through the Cable Modem Green This LED will blink to indicate that data is being transmitted to or from your Cable Modem to the Internet con nection Green This LED will go through a series of flashes as the Cable Modem goes through its start up process Once the process is complete the LED will remain lighted to show a successful con nection to your Internet Service Provider The Cable Modem will go through this process every time power is taken away from and restored to the it or when the Reset button is pressed This process can be fairly quick or prolonged depending on your Provider Internet traffic in your area etc If this LED is still blinking 10 minutes after the Cable Modem has been powered up or reset it is an indication of a connection problem Recheck your physical connections and call your ISP for more information EtherFast
13. em Requirements e CD ROM drive e PC running Windows 98 Millennium or 2000 equipped with USB port to use the USB connection or e 10 100Mbps RJ 45 Ethernet Network Interface Card e DOCSIS 1 0 compliant headend or DOCSIS 1 0 compliant MSO network Cable Internet Service Provider EtherFast Cable Modem with USB and Ethernet Connection Getting to Know the Cable Modem with USB and Ethernet Connection A Cable Modem is a device that allows high speed data access such as to the Internet via a cable TV network A cable modem will typically have two con nections one to the cable wall outlet and the other to a computer PC The fact that the word modem is used to describe this device can be a little mislead ing only in that it conjures up images of a typical telephone dial up modem Yes it is a modem in the true sense of the word since it MOdulates and DEModulates signals However the similarity ends there as these devices are much more complicated than telephone modems Cable modems can be part modem part tuner part encryption decryption device part bridge part router part network interface card part SNMP agent and part Ethernet hub Cable modem speeds vary depending on the cable modem system cable net work architecture and traffic load In the downstream direction from the net work to the computer network speeds can reach 27 Mbps an aggregate amount of bandwidth that is shared by users Few computers will be c
14. essing and holding in the Reset button allows you to clear the Cable Modem s connections if there are any data jams and resets the Modem to the factory defaults Continued or repeated pressing of this button is not recommended Power Port The Power port is where the included power adapter is connected to the Cable Modem EtherFast Cable Modem with USB and Ethernet Connection The USB CABLE Icon The USB icon shown below marks a USB port on a PC or device To use this USB device you must have Windows 98 2000 or Millennium installed on your PC If you do not have Windows 98 2000 or Millennium this device will not work Also this device requires that a USB port is installed and enabled on your PC Some PCs have a disabled USB port If your port doesn t seem to be working there may be motherboard jumpers or a BIOS menu option that will enable the USB port See your PC s user guide for details Some motherboards have USB interfaces but no ports You should be able to install your own USB port and attach it to your PC s motherboard using hard ware purchased at most computer stores Your Cable Modem with USB and Ethernet Connection comes with a USB cable that has two different types of connectors Type A the master connector is shaped like a rectangle and plugs into your PC s USB port Type B the slave connector resembles a square and connects to the USB port on the rear panel of your Cable Modem Ther
15. ht 2001 Linksys All Rights Reserved
16. la Laden Besse deve h a raira pogo oi maken a hadant douce weak Wider rss rer Filey boa pout rss isis obec deve Wee pnd congel raian cick Host Whg do pm myi the sagen to do D hpisp alint al thes bresan choses For thie denga oo lhal can chana a spacie deii _ cto O ewes 4 Windows will now search for the driver software Select CD ROM drives and click the Next button rind Soe hirda rar Locate Grover Fnr athe Go you veal Wires Les march hor devi fus Tanh Vos des Mop hor the Moore hordes dome Gp UES Cable Mocks The vipa peaches bot pababbe disah in iy dies clases on tee Doenpadey eed e any oF Ghee Lola apina saaa cations the pou pariy To lat the t obok Heat poe are Haathi on 4 oppa dk on CADH dise ias the lope dk ow DD baige clicking Ment Optical 1m4 berm store D Flpes dk d ves E CD FOM dress D Some a kestion M Hio Windows Udai 15 Instant Broadband Series 5 Windows will notify you that it has located the appropriate driver and is ready to install it Click the Next button Gowvar Fac Seach note The raid hin feed rester for dren files bee pos ade ee The waar Fear diver fo Oh Peder deve Gp USE Cate Mihira Windies found 2 diver os Des devices To metal the dress Wiredows bail chock Hest bel cor CL ed 6 When Windows will ask you to search for a digital signature click OK to finish your installation Digital Signature Not Found x The Hiosa digis
17. ne of the other divers View List _a THe cn 10 EtherFast Cable Modem with USB and Ethernet Connection 5 Windows will begin installing the driver for the modem At this point the installation may require files from your Windows 98 CD ROM If prompt ed insert your Windows 98 CD ROM into your CD ROM drive and enter d win98 in the box that appears where d is the letter of your CD ROM drive If you were not supplied with a Windows 98 CD ROM your Windows files may have been placed on your hard drive by your computer manufacturer While the location of these files may vary many manufac turers use c windows options cabs as the path Try entering this path into the box If no files are found check your computer s documentation or con tact your computer manufacturer for more information 6 After Windows has completed installing this driver click Finish Aid Hew Hidene wizard 7 When asked if you want to restart your PC remove all disks and click Yes If Windows does not ask you to restart your PC click the Start button choose Shut Down choose Restart then click Yes The Windows 98 driver installation is complete Return to the section on Connecting Using the USB Port to finish the set up 11 Instant Broadband Series Installing the USB Driver for Windows Millennium 1 Start up your PC in Windows Millennium Windows will detect new hard ware connected to your PC New Hardware Found
18. number your Cable Internet Service Provider should be able to activate your account The Hardware Installation is now complete Your Cable Modem is ready to use Instant Broadband Series Connecting Using the USB Port 1 Make sure that you have TCP IP installed on your computer If you don t know what TCP IP is or you don t have it installed refer to the section in the Appendix called Installing the TCP IP Protocol N Connect the coaxial cable from your Internet Service Provider Cable Company to the Cable Port on the back of the Cable Modem The other end of the coaxial cable should be connected in the manner proscribed by your Internet Service Provider Cable Company W With your PC turned off connect the power adapter included in your package to the Power Port on the back of the Cable Modem Plug the other end of the adapter into a standard electrical wall socket The Power LED on the front of the Cable Modem should light up and remain on 4 Plug the rectangular end of the USB cable into your PC s USB port Connect the square end of the USB cable into the Cable Modem s USB port un Turn on your PC During the boot up process your computer should rec ognize the device and ask for driver installation Refer to the chart below to locate the driver installation for your operating system Once the driver installation is completed return here for instructions on setting up your account If you are installing
19. o release the current IP addresss Then type ipconfig renew to get a new IP address DATA pd eT Le al Gl F Cia bpirat do IP address sorcespfuljly released fer alapter Legal brez in tipepst in resre a 2088 F Conf ipyuret don Local raa TT UT 4 Select the OK to close the IP Configuration window Try your Internet con nection again after this process 24 EtherFast Cable Modem with USB and Ethernet Connection Specifications Model No BEFCMU10 Standards IEEE 802 3 10BaseT IEEE 802 3u Downstreant Modulation Data Rate Frequency Range Bandwidth Input Signal Level Upstreant Modulation Data Rate Kbps Frequency Range Bandwidth Output Signal Level Management MIB Group Security Baseline Privacy Interface Dimensions Unit Weight Certifications Operating Temp Storage Temp Storage Humidity 100BaseT DOCSIS 1 0 USB Specifications 1 1 64Q4M 256Q4M 30Mbps 64QAM 43Mbps 256Q4M 88MH to 860MHz 6MHz 15dBnV to 15dBniV QPSK 16Q4M 320 640 1280 2560 5120 QPSK 640 1280 2560 5120 10240 16QAM 5MHz to 42MHz 200 400 800 1600 3200KHz 8 to 58dBmv QPSK 8 to 55dBmV 16QAM SNMP 2 with MIB II DOCSIS MIB Bridge MIB 56 Bit DES with RSA Key Management F type female 75 ohm connector RJ 45 10 100 Port Type B USB Port Power Activity Cable Status Environmental 7 13 x 5 63 x 1 42 inches 181 nmx 143 nmx 36 nm 16 028 Kg Exte
20. rnal 12V FCC Part 15 Class B CE Mark Commercial 329F to 104 O C to 40 C 4F to 158 F 20 C to 70 C 10 to 90 Non Condensing 10 to 90 Non Condensing 25 26 Instant Broadband Series Warranty Information BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT S PACKAGING ON HAND WHEN CALLING RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE IN NO EVENT SHALL LINKSYS LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT INDIRECT SPECIAL INCIDEN TAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT ITS ACCOMPANYING SOFTWARE OR ITS DOCU MENTATION LINKSYS DOES NOT OFFER REFUNDS FOR ANY PROD UCT LINKSYS OFFERS CROSS SHIPMENTS A FASTER PROCESS FOR PRO CESSING AND RECEIVING YOUR REPLACEMENT LINKSYS PAYS FOR UPS GROUND ONLY ALL CUSTOMERS LOCATED OUTSIDE OF THE UNITED STATES OF AMERICA AND CANADA SHALL BE HELD RESPONSIBLE FOR SHIPPING AND HANDLING CHARGES PLEASE CALL LINKSYS FOR MORE DETAILS FtherFast Cable Modem with USB and Ethernet Connection Contact Information For help with the installation or operation of this product contact Linksys Customer Support at one of the phone numbers or Internet addresses below Information 800 546 5797 LINKSYS Tech Support and RMA Issues 866 242 8558 Fax 949 261 8868 Email support linksys com Web http www linksys com FTP Site ftp linksys com 27 WLINKSyYS http www linksys com Copyrig
21. s Check all cables between your computer and the Cable Modem for frays breaks or exposed wiring Make sure your power supply is properly plugged into both the modem and a wall outlet or surge protector If your Cable Modem is properly connected the Power LED Cable LED and Status LED on the front of the modem should all be a solid color Try pressing the Reset button on the back of your cable modem Using an object with a small tip push the button until you feel it click Then try reconnecting to your Cable Internet Service Provider Call your Broadband Service Provider to verify that their service is two way This modem is designed for use with two way cable plants If you installed the Cable Modem using the Ethernet port make sure that your Ethernet adapter is operating correctly Check the adapter in the Device Manager in Windows to make sure it is listed and has no conflicts If you are unsure of how to do this check your Windows documentation Use the port to connect to a LAN if available to test it Make sure that TCP IP is the default protocol in use by your system See the section called Installing the TCP IP Protocol for more information If you are using a cable line splitter so that you can connect the cable modem and a television at the same time try removing the splitter and reconnecting your cables so that your cable modem is connected directly to your cable wall jack Then try reconnecting to your Broadband Service Pro
22. t to Run and click to open the Run window 22 EtherFast Cable Modem with USB and Ethernet Connection 2 Enter winipcfg in the Open field Click the OK button to execute the pro gram The next window to appear will be the IP Configuration window 5 x iLike LIME NOT Fast E ara Adaptar Addrece WHAE OP dure 132 165 1 139 Sabre ak 2620 Dreisi Gates 1188125 3 Select the Ethernet adapter to show the IP address Press Release and then press Renew to get a new IP address from your ISP s server IP Contegeeateon Etheonet Adapter Infomation Adapter Address OCHA4 O0 C1 D5 9E IPAddess 192 168 1 51 Subnet Mask 255 255 255 0 Detauk Gateway 142166 1 254 ie HITS Release An _ Renewal Move info gt gt 4 Select the OK to close the IP Configuration window Try your Internet con nection again after this process 23 Instant Broadband Series For Windows NT and 2000 users 1 From your Windows NT or 2000 desktop click the Start button point to Run and click to open the Run window as shown in step 1 under Windows 95 98 and Millennium users 2 Enter cmd in the Open field Click the OK button to execute the program The next window to appear will be the DOS Prompt window fe B i OFECHS Windows ATCA pyright 1785 1796 Aicrosoft Corp 3 If your prompt does not read C type cd until you are at the C prompt At that prompt type ipconfig release t
23. the equipment to an outlet other than the receiver s Consult a dealer or an experienced radio TV technician for assistance UG BEFCM10 10802NC DG Instant Broadband Series EtherFast Cable Modem with USB and Ethernet Connection Table of Contents Introduction Introduction 1 The Instant Broadband Cable Modem with USB and Ethernet Connection The Instant Broadband Cable Modem with USB and 1 Ethernet Connection Features 1 Package Contents 2 Congratulations on the purchase of your new Instant Broadband Cable System Requirements 2 Modem with USB and Ethernet Connection With cable s high speed Internet access now you can enjoy the full potential of Internet applications Getting to Know the USB Cable Modem 3 Overview 3 Now you can make the most of the Internet and cruise the Web at speeds you never The Rear Panel 4 imagined possible Cable Modem Internet service means no more waiting for lag The USB Icon 5 i S The Front Panel 6 ging downloads even the most graphic intensive Web pages load in seconds And if you re looking for convenience and affordability the EtherFast Cable Connecting the Cable Modem with USB to Your PC 7 C g Modem with USB and Ethernet Connection really delivers Installation is quick onnecting Using the Ethernet Port 7 Connecting Using the USB Port 8 and easy The Plug and Play EtherFast Cable Modem with USB and Ethernet Installing the USB Driver for Windows 98 9 Connection connects
24. vider FtherFast Cable Modem with USB and Ethernet Connection The Cable Status LED never stops blinking The signal from your cable company s equipment may be too weak or the cable line may not be properly attached to the modem If the cable line is properly connected to the modem call your cable company to verify whether or not a weak signal may be the problem Al of LEDs on the front of my modem look right but I still can t access the Internet If the Power LED Cable LED and Status LED are on but not blinking your cable modem is operating properly Try shutting down and powering off your computer and then turning it back on This will cause your com puter to re establish communications with your Cable Internet Service Provider Try pressing the Reset button on the back of your cable modem Using an object with a small tip push the button until you feel it click Then try reconnecting to your Cable Internet Service Provider Make sure that TCP IP is the default protocol in use by your system See the section called Installing the TCP IP Protocol for more information If you are using a cable line splitter so that you can connect the cable modem and a television at the same time try removing the splitter and reconnecting your cables so that your cable modem is connected directly to your cable wall jack Then try reconnecting to your BSP The power on my modem goes on and off sporadically or the Status LED never stops blinking
Download Pdf Manuals
Related Search