Insignia NS-LCD19-09 Flat Panel Television User Manual
Contents
1. Adjust the contrast and brightness Make sure that the correct video mode is selected e Make sure that the incoming signal is compatible Make sure that the antenna is connected correctly e Check the closed caption settings Some TEXT modes can block the screen Good picture but no ncrease the volume sound Make sure that the sound is not muted e Make sure that the correct audio mode is selected Good sound but poor Adjust the contrast color and color Poor picture brightness settings Make sure that the room is not too bright Light reflecting off the screen can make the picture difficult to see e fan S VHS camera or a camcorder is connected while another connected device is turned on the picture may be poor Turn off one or more devices Horizontal dotted line Your TV may be too close to another electrical device such as a hair dryer or neon light Turn off the device or move your TV Symptom Ghost or double image Picture has a few bright or dark dots Remote control does not work Snowy picture or noise VGA picture is not stable or synchronized No output from one of the speakers Control buttons do not work After images appear Appendix Possible solution This may be caused by obstructions to the antenna such as high rise buildings or hills Using a highly directional antenna may improve the picture quality A few bright or dark dots on an LCD2. Time Set Sets the clock For more information see Setting the clock on page 9 Sleep Timer Sets the sleep timer For more information see Setting the sleep timer on page 9 Advanced Video Set Noise Reduction Select from Low Mid High and Off Color Temperature Select from Normal Warm and Cool default 2 Y C Choose from On default or Dynamic Contrast Choose from On or Off default Setting Restores the settings to factory default Password Set Lets you set the password for parental control options The default password is 0000 See Setting parental controls on page 9 Parental Control Accesses V chip controls For more information see Setting parental controls on page 9 Digital Caption Sets the digital caption type Choose from Service 1 6 Text 1 4 and Closed Caption Options Customizes closed captions for digital broadcasting systems You can adjust Size Font Text Color Text Opacity Background Color Background Opacity Edge Effect and Edge Color Component Set Only available in component mode Lets you set Horizontal Position 0 100 Vertical Position 0 100 Clock 0 100 and Phase 0 100 The Settings option restores the settings to factory default VGA Set Only available in VGA mode Lets you set Horizontal Position 0 100 Vertical Position 0 100 Clock 0 100 and Phase 0 100 You can also select Auto Adjust to automatically adjust the settings The Settin
3. 60 Hz 1024x768 60 Hz 1440x900 60 Hz Audio input Headphone mini jack for stereo 17 56 x 14 13 x 5 67 inches 44 6 x 35 9 x 14 4 cm 8 82 Ibs 4 kg Power cord User guide Remote control Batteries 2 AAA VGA cable PC audio cable Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules Operation of this product is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply within the limits for a class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiv
4. and cause injury Tune into safety e One size of TV stand does not fit all Use only a TV stand rated for the weight of your TV e Carefully read and understand all enclosed instructions for proper use of this product e Don t let children to climb on or play with entertainment system furniture and TVs Don t place TVs on furniture that can easily be used as steps such as a chest of drawers e Remember that children can become excited while watching a program especially on a larger than life TV Make sure that you place or install the TV where it cannot be pushed pulled over or knocked down Make sure that you route all cords and cables so that they cannot be pulled or grabbed by curious children Wall mounting If you decide to wall mount your TV always One size of wall mount does not fit all Use only a wall mount rated for the weight of your TV and that has been recommended by this TV manufacturer listed in this manual or otherwise listed by an independent laboratory such as UL CSA or ETL as suitable for your TV Follow all instructions supplied by the TV and wall mount manufacturers f you have any doubts about your ability to safely wall mount your TV get help from a professional installer Make sure that the wall where you are mounting the TV is Le appropriate Some wall mounts are not designed to be LD mounted to walls backed with steel studs or cinder blocks NS If you are unsure ask a
5. end of the cable to the cable TV wall outlet To connect cable TV with a converter descrambler box e Use the following illustration to connect a converter descrambler box The RF switch and the signal splitter are not provided Set the RF switch to the A position to tune to unscrambled channels using your TV remote control Set the RF switch to the B position to tune to scrambled channels using the converter descrambler controls RF switch Two set signal splitter AD pra H Pp B Out I In Cable converter descrambler box You can connect a DVD VCD VCR or STB using a variety of methods including composite cables component cables an S Video cable or an HDMI cable The S Video cable does not carry sound If you use an S Video cable you need to use audio cables to connect the audio output Warning Make sure that you turn off and unplug your TV before connecting devices Note For better video use the S Video jack if your device has an S Video connection For best video use the HDMI jack if your device has an HDMI connection To connect an external signal source 1 For composite video Plug the audio video cable into the AUDIO L and AUDIO R 2 jacks and VIDEO 4 jack on the back of your TV then connect the other ends to the corresponding jacks on the external signal Source Or For S Video Plug in the audio cables as described above then plug one e
6. jack on the back of your TV 2 Plug an audio cable from your computer s audio out jack into the AUDIO jack on the back of your TV 3 Plug in and turn on your TV 4 Press INPUT repeatedly to select the VGA input source To connect a computer using HDMI Plug an HDMI cable into the HDMI INPUT jack on the back of your TV and into the HDMI Out jack on the back of the computer Using your TV Turning your TV on and off To turn your TV on and off 1 Make sure that the power cord is connected to your TV and a power outlet 2 Press b to turn on your TV The power indicator LED turns blue 3 Press b again to return your TV to standby The power indicator LED turns red Selecting the TV signal source To select the TV signal source With the TV on press INPUT on either the TV or the remote to choose from e TV Composite S Video Component VGA HDMI Note HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC INSIGNIA Setting up the channel list After you select your TV source if you selected antenna or cable you need to set up the channel list When you set up your channel list your TV searches for all available channels in your area and stores a list of these channels When you press CH or CH v your TV skips the channels
7. professional installer TVs can be heavy At least two people are required for safe wall mount installation Consumer Electronics Association Safety information Caution To prevent electric shock match the wide blade on the power cord plug to the wide slot on an electric outlet If the plug does not fit consult a licensed electrician to replace the obsolete outlet Do not modify the power cord plug or you will defeat this safety feature la A Warning This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV This label is located on the back of your TV This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV Your TV contains tin lead solder and a fluorescent lamp containing a small amount of mercury Disposal of these materials may be regulated for environmental reasons For disposal or recycling information contact your local authorities or the Electronic Industries Alliance at www eia org Important safety instructions 1 Noo fF QI 10 11 12 13 14 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use your TV near water Clean the cabinet with a dry cloth only Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radi
8. screen is normal It does not affect the operation of this TV Press TV Replace the batteries Make sure that the and symbols on the batteries align with the and symbols in the battery compartment Clean the remote sensor on the front of your TV Bright or fluorescent lighting may interfere with the remote control signal Turn off the light or move your TV Make sure that the A V and antenna cables are connected correctly and securely Make sure that you have selected the correct VGA mode on your computer Adjust the balance in the Sound menu Unplug the power cord wait a few seconds then plug the cord back in and turn on your TV Do not display a still image such as a logo game or computer image for an extended period of time This can cause a permanent after image to be burned into the screen This type of damage is not covered by your warranty Wall mount hardware sold separately lets you mount your TV on a wall For detailed information on mounting your TV on a wall see the instructions provided with the wall mount hardware Contact a technician for assistance when installing the wall mount bracket Best Buy is not responsible for any damage to your TV or injury to yourself or others We suggest that you keep your TV at least 2 36 inches 60 mm from the wall to prevent cable interference INSIGNIA To attach a wall mount bracket to your TV 1 Remove the four M4 screws holdi
9. that do not have a signal Automatically setting up channels To automatically set up the channel list 1 Press MENU The on screen display menu opens with Setup highlighted Tuning Band DTV Signal Auto Ch Search Ep Add On Ch Search mp Manual Channel Set Ep Channel Labels Menu Language Aspect Ratio Favorite Channel Mode v Stomove SER To Select O To Exit 2 Press to enter the sub menu then press w or a to highlight Auto Ch Search 3 Press ENTER or to start the search Note You can press Exit to stop the search Manually adding or deleting channels from the channel list After you create a channel list using the Auto Ch Search option you can manually add or delete channels from the channel list To add or delete channels 1 Press MENU The on screen display menu opens with Setup highlighted 2 Press to enter the sub menu then press w or a to highlight Manual Channel Set The Channel Setup Table opens 3 Press w or a to select a channel then press ENTER to toggle between viewable and not viewable 4 Press MENU or EXIT to close the menu Changing channels To change channels Press CH v or CH on the remote control to go to the next lower or higher channel Or Press the number buttons to directly select a channel for example if you want channel 83 press 8 then press 3 Or Press o RECALL to go to the last viewed channel Selecting a digital sub channel Most digi
10. to confirm Press ENTER to continue Confirm New Password Oooo Caution Write down your password and save it for future use Note If you forget your password enter 3448 for the old password then enter a new password This password always remains valid for resetting your password Setting the Parental Control level To set the Parental Control level 1 Press MENU The on screen display menu opens with Setup highlighted 2 Press w or a repeatedly to highlight Feature The Feature menu opens 3 Press to enter the sub menu then press w or a to highlight Parental Control The Password screen opens Enter Password 4 Press the number buttons to enter the password Press ENTER to continue The Parental Control Menu opens Parental Control Menu USA Parental Locks rom gt Canadian Parental Locks up To Move ENTER Jf Select ED To Exit 5 Press w or a to select USA Parental Locks or Canadian Parental Locks then press ENTER The lock menu that you have selected opens USA Parental Locks TV RATING L 10 6 Press or p or w or a to move to a rating then press ENTER to select the rating When you block a rating that rating and all higher ratings are blocked 7 Press MENU or EXIT to close the menu American MPAA ratings Rating Description NONE Not rated G General audiences PG Parental guidance suggested Some material may not be suitable for children PG 13 Parental guid
11. Contrast Increases the picture level to adjust the white areas of the picture Decreases the picture level to adjust the black areas of the picture 0 100 Brightness Increases the brightness to add more light to dark areas of the picture Decreases the brightness to add more dark to light areas of the picture 0 100 Sharpness Increases the sharpness for a cleaner and clearer image Decreases the sharpness for a smoother picture 50 50 Color Adjusts the overall color of the picture 0 100 Tint Increases the color level to add more green to skin tones Decreases the color level to add more purple to skin tones R50 G50 Backlight Adjusts the backlight level 0 10 Settings Restores the video settings to factory default Audio Language Selects an alternate language if the program has more than one language available Only available in ATSC TV mode Bass Adjusts the low sounds bass Treble Adjusts the high sounds treble Balance Adjusts the right and left speaker volumes Digital Audio Output Selects the audio mode for the digital audio optical jack RAW AC 3 in AC 3 out PCM in PCM out e PCM AC 3 in PCM out PCM in PCM out TV Speaker Turns the internal TV speaker On default or Off Does not affect the digital audio output the headphone output and the composite audio output Settings Restores the audio settings to factory default 11 INSIGNIA On screen menu Feature Options
12. NESS OR LOST PROFITS INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED WILL APPLY AFTER THE WARRANTY PERIOD SOME STATES PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE Contact Insignia For customer service please call 1 877 467 4289 www insignia products com INSIGNIA is a trademark of Best Buy Enterprise Services Inc Distributed by Best Buy Purchasing LLC Insignia 7601 Penn Avenue South Richfield Minnesota U S A 15 INSIGNIA INSIGNIA www insignia products com 877 467 4289 Distributed by Best Buy Purchasing LLC 7601 Penn Avenue South Richfield MN USA 55423 3645 2008 Best Buy Enterprise Services Inc All rights reserved INSIGNIA is a trademark of Best Buy Enterprise Services Inc Registered in some countries All other products and brand names are trademarks of their respective owners ENGLISH 08 1332
13. User Guide INSIGNIA 19 LCD TV 720P NS LCD19 09 INSIGNIA Insignia NS LCD19 09 19 LCDTV 720P Contents Introduction 34224542 gee babe ee Rela dda aed XR EN Raid aad 1 Safety information 000 0000 eet 3 EA e a a e e a aa Aae E RE EA 4 FIOM sibs kee dee pae dea bbe hd bet bie suerte Scb bab le a aE dier E Ur aE ae ee 4 Remote Control uuu Kaserne Tex eim EAR ax weed eee nr Ae 4 Setting UP Your TV ess sce ue pem Ra uk ede RES Xu Y egies mer eee 5 Installing remote control batteries llle BIA 5 Connecting your TV to a power outlet 2 ketene 5 Connecting an outside antenna 0 0 ett 6 Connecting cable TV zu woke deaeor a nee enden bos EIE 6 Connecting to an external signal source 0 0 0 0 e eee tetas 6 Connecting a computer Lo 7 Using YOUR TY omic mk Sea EA en RACER an Pe A eee ie RR S 7 Turning your TV on and Off 2 nern ernennen ernennen 7 Selecting the TV signal Source 0 0 tte n 7 Setting up the channel list lisse RII 8 Changing channels 2 iif ls upset tepore ee cmm S e Rm e Ro ND OR PR nn 8 Selecting a digital sub channel liiis 8 Adjusting the volume se 0 lb eic Fegan deta dee da ARE Os eke wee eee eS 8 Displaying status information oooooooocooorrr I me 8 Checking the DTV signal strength 2 0 cece cette eee 8 Adding a channel label 0 0000 cee eee eee 8 Freezing the Piclure 2 tered a re te Ph rae POL whee eae deed e
14. ance strongly suggested Some material may not be suitable for children under 13 years of age R Restricted Not suitable for children under 17 years of age unless accompanied by a parent or guardian Not suitable for children under 17 years of age X Adults only Canadian MPAA Ratings NC 17 Rating Description C Children C84 Children 8 years and above G General audience PG Parental guidance suggested 14 14 years old and above 18 Adult programming X Adults only TV Parental Guidelines ratings Rating Description NONE Not rated TV Y All children TV Y7 Children over seven years TV G General audiences TV PG Parental guidance suggested TV 14 Parents strongly cautioned TV MA Mature audiences only Some of the age based TV Parental Guidelines ratings also have content based ratings Rating Description FV Fantasy violence L Adult language S Sexual situations V Violence D Sexually suggestive dialog Using the on screen menu Your TV has an on screen menu that lets you adjust TV settings such as video and audio settings To use the on screen menu 1 2 Press MENU The on screen display menu opens Press w or a repeatedly to select a menu item Press 4 or to enter a sub menu Tuning Band DTV Signal Auto Ch Search T ai Add On Ch Search mn pm Manual Channel Set ES Channel Labels Ep Menu Language Aspect Ratio Favorite Channel Mode or p S To Mov
15. ators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from your TV Only use attachments or accessories specified by the manufacturer Use only with a cart stand tripod bracket or table specified by the manufacturer Unplug your TV during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel INSIGNIA 15 Servicing is required when your TV has been damaged in any way such as the power supply cord or plug is damaged liquid has been spilled or objects have fallen into your TV your TV has been exposed to rain or moisture does not operate normally or has been dropped 16 Do not overload wall outlets Overloaded wall outlets loose or damaged wall outlets extension cords frayed power cords or damaged or cracked wire insulation are dangerous Any of these conditions could result in electric shock or fire Periodicall
16. e SNN To Select E To Exit Press ENTER or to confirm an adjustment or toggle a setting Press MENU or EXIT to close the on screen display menu On screen menus On screen menu Setup Options Tuning Band Selects the TV antenna source Air or Cable DTV Signal Displays the digital TV signal strength For more information see Checking the DTV signal strength on page 8 Auto Ch Search Automatically sets up a list of the channels available in your area For more information see Automatically setting up channels on page 8 Add On Ch Search Lets you add new channels without going through the entire list of available channels Manual Ch Set Lets you add or delete channels from the channel list For more information see Manually adding or deleting channels from the channel list on page 8 Channel Labels Lets you add a label to a channel For more information see Adding a channel label on page 8 Menu Language Selects the language for the on screen menu You can select English French or Spanish Aspect Ratio Selects the screen aspect ratio Normal Wide1 Wide2 Zoom or Cinema You can also press ZOOM to select the aspect ratio Favorite Channel mode Lets you edit your favorite channel list Press FAVORITE on the remote to toggle this mode on or off On screen menu Video Options may vary in different modes Audio Options may vary in different modes INSIGNIA Options
17. e Plug the power cord into a power outlet Notes Make sure that you use the correct type of power See the label on your TV e f you do not intend to use your TV for an extended period of time unplug the power cord from the power outlet INSIGNIA Connecting an outside antenna Connecting to an external signal source o Antenna cables come in two types 75 ohm and 300 ohm 75 ohm cable 300 ohm cable A e If your antenna cable has a 75 ohm connector connect the cable to the coaxial jack on the back of your TV e f your antenna cable has a 300 ohm connector connect the cable to a 300 75 ohm adapter not included connect the adapter to a 75 ohm cable then connect the other end of the 75 ohm connector to the coaxial jack on the back of your TV Connecting cable TV Your TV has a 75 ohm jack for connecting cable TV Some cable TV providers scramble the signals for premium pay channels To view these channels you need a converter descrambler box If you do not have a converter descrambler box you can connect your cable TV directly to your TV If you have a converter descrambler box you can connect your cable TV using an RF switch not supplied For more information about connecting a converter descrambler box contact your cable TV provider To connect cable TV without a converter descrambler box 1 Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV 2 Connect the other
18. e eee E 9 Setting Ihe ClOCK sx deca data os wade Sealed aque aes he da aloes Bele 9 Setting the sleep timer 1 0 0 cette ete 9 Viewing closed captions llle RI ee 9 Setting parental controls 0 0 0 irad mera diena teen hn 9 Using the on screen Menu 2 1 6 eens 11 On screen MENUS sssaaa rr 11 Maintaining xs enero A ru xe xus E WEEER EEI E nee 12 Cleaning your IV ossi eed x perd uon rl TENE E Pe Re M d x e gel XAR HERE E dnd 12 Troubleshooting kam Lede eR I e RO Le REE ew 12 Peppe EET 13 Specifications s ea 2 eroe mra a e Va ee ne 13 ENIM 14 One year limited warranty o oococcocccco teas 15 Introduction Congratulations on your purchase of a high quality Insignia product Your NS LCD19 09 represents the state of the art in LCD TV design and is designed for reliable and trouble free performance INSIGNIA CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product keep these safety tips in mind The issue The home theater entertainment experience is a growing trend and larger TVs are popular purchases However TVs are not always supported on the proper stands or installed according to the manufacturer s recommendations We and the consumer electronics industry are committed to making home entertainment enjoyable and safe TVs that are inappropriately placed on dressers bookcases shelves desks speakers chests or carts may fall over
19. el In Menu mode functions as the down arrow Press to show the on screen menu Press to open the input source menu then press or w to cycle through the available input sources Press to turn on your TV or put it into Standby mode 2 VOL 3 CH A 4 CH v 5 MENU 6 INPUT 7 POWER Remote control a Di VOL ol 9 6 9 9 C UD S GS 9 amp Q dle Go INSIGNIA ZRC 101 Button POWER d INPUT DISPLAY VIDEO Number buttons VOL MUTE VOL MENU A Y lt gt ENTER P LOCK Description Press to turn on your TV or put it into Standby mode Press to cycle through the available input sources Press to display status information Press to toggle between S Video and composite source modes Press to enter channel numbers In the on screen menu press to enter your parental control password Use with the 0 9 number buttons and ENTER button to select digital channels Press to increase the volume Press to mute the sound Press again to restore the sound Press to decrease the volume Press to open the on screen menu Press to move down up left or right in the on screen menu Press to confirm changes or to turn options on and off in the on screen menu Press to activate or deactivate parental controls See Setting parental controls on page 9 for information on setting up parental controls Button 14 ZOOM Descripti
20. er Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced technician for help FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this equipment Cables Connections to this device must be made with shielded cables with metallic RF EMI connector hoods to maintain compliance with FCC Rules and Regulations DO DoLBy DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories One year limited warranty Insignia Products Insignia warrants to you the original purchaser of this new NS LCD19 09 Product that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one 1 year from the date of your purchase of the Product Warranty Period This Product must be purchased from an authorized dealer of Insignia brand products and packaged with this warranty statement This warranty does not cover refurbished Product If you notify Insignia during the Warranty Period of a defect covered by this warranty that requires service terms of this warranty apply How long does the coverage last The Warranty Period lasts for 1 year 365 days from the date you purchased the Product The purchase date is p
21. ervice equipment 2 Power service grounding electrode system 3 Ground clamps 4 Grounding conductors 5 Antenna discharge unit INSIGNIA 6 Grounding clamp 7 Antenna lead in wire Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for correct grounding and in particular specifies that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical Mobile telephone warning To avoid interference with your TV picture and sound operating problems or even damage keep your cordless or cellular telephones away from the TV Non active pixels The LCD panel contains almost 3 million thin film transistors which provide exceptionally sharp video quality Occasionally a few nonactive pixels may appear on the screen as a fixed blue green or red point These non active pixels do not adversely affect the performance of your TV and are not considered defects Features Front Description Press to increase the volume In Menu mode functions as the right arrow to go to the next menu or increase a setting Press to decrease the volume In Menu mode functions as the left arrow to go to a previous menu or decrease a setting Press to go to the next higher channel In Menu mode functions as the up arrow Press to go to the next lower chann
22. gs option restores the settings to factory default Input Label Lets you change the input label Maintaining 12 Do not use your TV in areas that are too hot or too cold because the cabinet may warp or the screen may malfunction Storage temperatures are 32 to 122 F 0 to 50 C e Working temperatures are 41 to 104 F 5 to 40 C Do not place your TV in direct sunlight or near a heat source Cleaning your TV Clean the screen and cabinet with a soft lint free cloth If the screen or cabinet is especially dirty moisten a soft lint free cloth ina weak detergent solution squeeze the excess moisture from the cloth then wipe the screen or cabinet with the cloth Use a clean cloth to dry the screen or cabinet Cautio Avoid the following because it may cause damage to your TV Cleaning your TV with volatile substances such as insect sprays solvents and thinners Leaving items made from rubber or PVC in contact with your TV for long periods Letting liquids drip into the cabinet Troubleshooting Warning Do not try to repair your TV yourself Refer all service to a qualified service technician Symptom No power No picture Possible solution Make sure that the power cord is connected to your TV and a power outlet Unplug the power cord wait 60 seconds then plug the cord back in and turn on your TV Make sure that the video cables are connected securely to the back of your TV
23. nd of an S Video cable into the S Video 5 jack on the back of your TV then plug the other end into the S Video jack on the external signal Source Or For component video Plug the Y Pb and Pr video cables into the COMPONENT 3 video jacks and the Audio L and Audio R cables into the COMPONENT 6 audio jacks on the back of your TV then plug the other ends of the cables into the corresponding jacks on the external signal source Or For HDMI Plug one end of an HDMI cable into the HDMI 1 jack on the back of your TV then plug the other end into an HDMI device Oi 1 Eno o O e 9 9 2 Turn on your TV 3 Press INPUT repeatedly to select the external signal source you want to watch 4 Turn on external signal source 5 Insert a disc or videotape into the external signal source then press PLAY Connecting a computer You can connect a computer using the HDMI or VGA jack on the back of your TV Warning Make sure that you turn off and unplug your TV before installing devices Note When the computer goes into standby mode your TV turns off If your TV does not turn on when you wake your computer press the POWER button on your TV or remote control INSIGNIA To connect a computer using VGA 1 Plug a VGA cable from your computer into the VGA
24. ng your TV to the stand M4 screws Attach wall bracket here 100 mm 2 Remove the scew from the bottom of the base Screw 3 Secure the wall mount bracket to the back of your TV using one M4 screw as indicated in the illustration in Step 1 Specifications Analog standard Digital standard Screen Channel coverage Power source Power consumption Audio power S Video input Video audio input Design and specifications are subject to change without notice NTSC ATSC 8 VSB Clear QAM 19 inch VHF 2 13 UHF 14 69 CATV Mid band A 8 A 1 A Super band J W Hyper band AA ZZ AAA BBB Ultra band 65 94 100 135 AC 100 240 V 50 60 Hz lt 60 W lt 1 W in standby mode 3 W 3 W internal speaker Y 1 V p p 75 ohm negative sync C 0 286 V p p burst signal 75 ohm p p Video 1 V p p 75 ohm negative sync Audio 500 mV rms 13 INSIGNIA Component input HDMI input VGA input Dimensions with base Weight Accessories 14 Y 1 V p p 75 ohm including sync Pr Cr 0 35 V p p 75 ohm Pb Cb 0 35 V p p 75 ohm Audio 500 mV rms Suggested resolutions 1080i 720p 480p 480i 1 HDMI input terminal HDCP compliant E EDID compliant Suggested scan rates 1080i 720p 480p 480i D Sub 15 pin terminal E EDID compliant Suggested scan rates 640x480 60 Hz 800x600
25. on Press to select the display aspect ratio Press to select one of the preset audio modes In analog TV mode you can select MONO STEREO or SAP secondary audio program In digital TV DTV mode you can select the audio language if more than one language is available Press to select the Brightness and Contrast setting You can adjust the brightness and contrast without opening the on screen menu Press to set the sleep timer For more information see Setting the sleep timer on page 9 Press to select the component source mode Press to select the ATSC digital or NTSC analog TV source Press to select the HDMI mode Press to watch the previous channel Press to tune to the next higher channel in the channel list Press to tune to the next lower channel in the channel list Press to toggle the Favorite Normal mode See Setting up the channel list on page 8 for more information Press to close the on screen menu Press to turn closed captions on and off For more information see Viewing closed captions on page 9 15 MTS SAP 16 PICTURE 17 SLEEP 18 COMP 19 TV 20 HDMI 21 O RECALL 22 CHA 23 CHY 24 FAVORITE 25 EXIT 26 CCD 27 FREEZE Press to freeze the video image Press again to unfreeze the image Do not freeze the video image for long periods of time You may damage the TV screen Press to select the Bass or Treble setting You can adjust the bas
26. press w or 4 to select a channel 4 Press d or to move the cursor to the label field then press w or 4 to select the character 5 Press ENTER to return to the previous menu Freezing the picture You can freeze still the screen image Caution To protect your TV do not freeze the screen image for long periods of time To freeze or unfreeze the picture Press FREEZE Setting the clock To set the clock 1 Press MENU The on screen display menu opens with Setup highlighted 2 Press or a repeatedly to highlight Feature The Feature menu opens Time Set SS Sleep Timer Advanced Video Menu Emi Password Set Fb Parental Control HE Digital Captions Digital Closed Caption 3 Press to enter the sub menu then press w or a to highlight Time Set The Time Set menu opens Time Set Menu Time Set Mode Time Zone Time 12 00 AM gt ADToChange ToMove EEE To Exit 4 Press w or 4 move to the different fields then press d or to change the settings 5 Press MENU or EXIT to close the menu Setting the sleep timer The sleep timer lets you select the amount of time before your TV turns off automatically To set the sleep timer 1 Press MENU The on screen display menu opens with Setup highlighted 2 Press or a repeatedly to highlight Feature The Feature menu opens 3 Press to enter the sub menu then press w or a to highlight Sleep Timer INSIGNIA 4 Press d or gt to
27. rinted on the receipt you received with the Product What does this warranty cover During the Warranty Period if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel Insignia will at its sole option 1 repair the Product with new or rebuilt parts or 2 replace the Product at no charge with new or rebuilt comparable products or parts Products and parts replaced under this warranty become the property of Insignia and are not returned to you If service of Products or parts are required after the Warranty Period expires you must pay all labor and parts charges This warranty lasts as long as you own your Insignia Product during the Warranty Period Warranty coverage terminates if you sell or otherwise transfer the Product How to obtain warranty service If you purchased the Product at a retail store location take your original receipt and the Product to the store you purchased it from Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging If you purchased the Product from an online web site mail your original receipt and the Product to the address listed on the web site Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging To obtain in home wa
28. rranty service for a television with a screen 25 inches or larger call 1 888 BESTBUY Call agents will diagnose and correct the issue over the phone or will have an Insignia approved repair person dispatched to your home Where is the warranty valid This warranty is valid only to the original purchaser of the product in the United States and Canada What does the warranty not cover This warranty does not cover Customer instruction Installation Set up adjustments Cosmetic damage Damage due to acts of God such as lightning strikes Accident Misuse Abuse Negligence Commercial use Modification of any part of the Product including the antenna Plasma display panel damaged by static non moving images applied for lengthy periods burn in This warranty also does not cover Damage due to incorrect operation or maintenance Connection to an incorrect voltage supply Attempted repair by anyone other than a facility authorized by Insignia to service the Product Products sold as is or with all faults Consumables such as fuses or batteries Products where the factory applied serial number has been altered or removed INSIGNIA REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT INCLUDING BUT NOT LIMITED TO LOST DATA LOSS OF USE OF YOUR PRODUCT LOST BUSI
29. s or treble without opening the on screen menu 28 AUDIO Using the remote control To use the remote control e Point the remote control towards the remote sensor on the front of your TV Notes Do not expose the remote control to shock or liquids Do not use the remote control in an area with high humidity Do not place the remote control in direct sunlight Do not place objects such as furniture between the remote control and the remote sensor The remote control may not work if direct sunlight or bright light shines on the remote sensor Either move your TV or change the angle at which you use the remote control INSIGNIA Setting up your TV Installing remote control batteries To install the remote control batteries 1 Remove the battery cover 2 Insert two AAA batteries into the battery compartment Make sure that you match the and symbols on the batteries with the and symbols in the battery compartment 3 Replace the cover Notes e Do not mix batteries of different types Do not mix old and new batteries Remove batteries when the charge is depleted Battery chemicals can cause a rash If the batteries leak clean the battery compartment with a cloth If chemicals touch your skin wash immediately fthe remote control is not going to be used for an extended period of time remove the batteries Connecting your TV to a power outlet To connect your TV to a power outlet
30. select the amount of time Off 5 min 10 min 15 min 30 min 45 min 60 min 90 min 120 min 180 min or 240 min To turn off the timer select Off Note You can also press SLEEP to set the sleep timer Viewing closed captions Note To select or customize digital closed captions use the Digital Captions or Digital Closed Caption sub menus in the Feature menu To view closed captions Press CCD repeatedly to select a closed caption option You can select e On Off On When Mute Setting parental controls Your TV has a V chip that lets you control the type of programs your children can watch Parental controls include two ratings MPAA based on age and TV Parental Guidelines based on content and age A TV program may have an MPAA or TV Parental Guidelines rating so you should set controls for both ratings Before you can select ratings you need to set up a parental controls password To set up a password 1 Press MENU The on screen display menu opens with Setup highlighted 2 Press or a repeatedly to highlight Feature The Feature menu opens 3 Press to enter the sub menu then press or a to highlight Password Set 4 Press the number buttons to enter the old password If you have not set a password enter 0000 Press ENTER to continue Ga 5 Press the number buttons to enter a new password Press ENTER to continue EJ E INSIGNIA 6 Press the number buttons to enter the new password again
31. tal TV channels have more than one channel The main channel carries the signal for the main TV program The sub channels carry signals for additional or alternate programming Such as a radio or news broadcast For example if the main channel number is 8 the sub channel number might be 8 1 8 2 or 8 3 To select a sub channel 1 Press the number buttons for the main channel for example 8 2 Press then press the sub channel button for example 1 Adjusting the volume To adjust the volume e Press VOL or VOL to decrease or increase the volume Press MUTE to turn off the sound Press MUTE again to turn the sound back on Displaying status information To display status information e Press DISPLAY Your TV displays status information such as the channel number or signal source Checking the DTV signal strength To check the DTV signal strength 1 Press MENU The on screen display menu opens with Setup highlighted 2 Press to enter the sub menu then press w a to highlight DTV Signal The DTV signal meter opens Weak Normal Good Signal level O 17 1 7J 95 3 Press MENU or EXIT to close the menu Adding a channel label To add a label to a channel 1 Press MENU The on screen display menu opens with Setup highlighted 2 Press to enter the sub menu then press w or a to highlight Channel Labels The Channel Label menu opens 3 Press 4 or to move the cursor to the channel field then
32. y examine the cord of your TV and if its appearance indicates damage or deterioration unplug it discontinue use of your TV and have the cord replaced with an exact replacement part by an authorized service person Protect the power cord from physical or mechanical abuse such as being twisted kinked pinched closed in a door or walked upon Pay particular attention to plugs wall outlets and the point where the cord exits your TV 17 Ensure that you connect the earth ground wire to prevent possible electric shock If grounding methods are not possible have a qualified electrician install a separate circuit breaker Do not try to ground the unit by connecting it to telephone wires lightening rods or gas pipes 18 The main plug is the disconnecting device The plug must remain readily operable Outdoor antenna grounding If an outside antenna or cable system is connected to your TV make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA No 70 provides information with respect to correct grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of the antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode EN i NEN T r 3 o 1L e 1 Electric s
Download Pdf Manuals
Related Search