IBM 22P6959 Computer Drive User Manual
Contents
1. During the warranty period assistance for replacement or exchange of defective components is available In addition if your IBM option is installed in an IBM computer you might be entitled to service at your location Your technical support representative can help you determine the best alternative Telephone technical support Installation and configuration support through the HelpCenter will be withdrawn or made available for a fee at IBM s discretion 90 days after the option has been withdrawn from marketing Additional support offerings including step by step installation assistance are available for a nominal fee To assist the technical support representative have available as much of the following information as possible Option name Option number Proof of purchase O Copyright IBM Corp 2001 D 1 Computer manufacturer model serial number if IBM and manual Exact wording of the error message if any Description of the problem Hardware and software configuration information for your system If possible be at your computer Your technical support representative might want to walk you through the problem during the call For the support telephone number and support hours by country refer to the following table If the number is not provided contact your IBM reseller or IBM marketing representative Response time may vary depending on the number and nature of the calls received2. Support 24 hours a day 7 days a week Canada Toronto only 416 383 3344 Canada all other 1 800 565 3344 U S A and Puerto Rico 1 800 772 2227 All other countries Go to http www ibm com pc support and click HelpCenter Phone List D 2 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Appendix E Product warranty and notices This section contains the warranty period for your product and the IBM Statement of Limited Warranty Machine 8x4x32x8 CD RW DVD ROM Combination Drive Warranty period One Year Contact your place of purchase for warranty service information Some IBM Machines are eligible for on site warranty service depending on the country where service is performed IBM Statement of Limited Warranty Part 1 General Terms This Statement of Limited Warranty includes Part 1 General Terms and Part 2 Country unique Terms The terms of Part 2 replace or modify those of Part 1 The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use and not for resale from IBM or your reseller The term Machine means an IBM machine its features conversions upgrades elements or accessories or any combination of them The term Machine does not include any software programs whether pre loaded with the Machine installed subsequently or otherwise Unless IBM specifies otherwise the fo
3. Click Device Manager Click the IDE ATA ATAPI controller to open up the tree Double click the device that corresponds to your CD ROM port It is either Primary IDE or Secondary IDE 7 Click the Advanced Settings tab oO ow d o v O Copyright IBM Corp 2001 C 1 8 Click the Transfer Mode menu and select DMA if available 9 Click OK 10 Click Close to close the System Properties window A message is displayed informing you that the system settings have changed 11 Click OK to restart the computer Enabling DMA for Windows NT 4 0 Enabling DMA for Windows NT 4 0 requires a DMA bus master IDE controller device driver This might have been installed at the factory or you might have to install it yourself To determine if the device driver is installed follow these steps 1 Log on as an administrator Click Start gt Settings gt Control Panel Double click Devices Select the ATAPI device If the status is Started you do not have a DMA bus master IDE controller device driver installed akon If your computer does not have a DMA bus master IDE controller device driver go to the Web site for the manufacturer of your computer system board and download and install the Windows NT 4 0 DMA device driver The instructions for installing the device driver are provided on the manufacturer s Web site Note Carefully read the instructions that come with your device driver Some versions of bus master device driv
4. IBM 8x4x32x8 CD RW DVD ROM Combination Drive Federal Communications Commission FCC statement Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult an IBM authorized dealer or service representative for help Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits Proper cables and connectors are available from IBM authorized dealers IBM is not responsible for any radio or television interference caused by using other than recommended cabl
5. About this book This manual contains instructions for installing and using the IBM 8x4x32x8 CD RW DVD ROM Combination Drive The manual is divided into the following parts Part 1 Installation and user s guide This guide contains the product description and installation instructions in the following languages English French Spanish talian Brazilian Portuguese Traditional Chinese Japanese Part 2 Appendixes This section contains device driver problem solving help and service warranty and notice information Note The illustrations in this manual might be slightly different from your hardware Registering your option Thank you for purchasing OPTIONS by IBM Please take a few moments to register your product and provide us with information that will help IBM to better serve you in the future Your feedback is valuable to us in developing products and services that are important to you as well as in developing better ways to communicate with you Register your option on the IBM Web site at http www ibm com pc register IBM will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information O Copyright IBM Corp 2001 vii vili IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Installation and user s guide This section contains the product description hardware and softwa
6. Limitation of Liability The following paragraph is added to this Section The limitations and exclusions specified in the Statement of Limited Warranty will not apply to damages caused by IBM with fraud or gross negligence and for express warranty The following sentence is added to the end of item 2 IBM s liability under this item is limited to the violation of essential contractual terms in cases of ordinary negligence EGYPT Limitation of Liability The following replaces item 2 in this Section as to any other actual direct damages IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim For purposes of this item the term Machine includes Machine Code and Licensed Internal Code Applicability of suppliers and resellers unchanged Appendix E Product warranty and notices E 9 FRANCE Limitation of Liability The following replaces the second sentence of the first paragraph of this Section In such instances regardless of the basis on which you are entitled to claim damages from IBM IBM is liable for no more than items 1 and 2 unchanged IRELAND Extent of Warranty The following is added to this Section Except as expressly provided in these terms and conditions all statutory conditions including all warranties implied but without prejudice to the generality of the foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of Goods and Supply of S
7. The disc might be defective try another disc 3 The disc is not ISO 9660 High Sierra Group HSG or Universal Disc Format UDF compatible Check with your place of purchase There is no sound from the disc 1 Check that you are not using a data CD 2 Adjust the audio adapter volume control See the documentation that comes with your audio adapter and audio CD player program 3 Turn off the computer unplug the cables from the electrical outlets for your computer and all attached devices and remove the computer cover Ensure that the audio signal cable connects the CD RW DVD ROM Combination Drive with the sound adapter The connectors on the audio cables that are provided do not fit the connector on your audio adapter Some audio adapters might require a special cable See the documentation that comes with your audio adapter You might have to separately purchase an audio cable for the CD RW DVD ROM Combination Drive If you are using an IBM computer or IBM audio adapter refer to a a Unable to Create Overlay Window message appears when you use DVD Express with Windows 95 Windows 98 or Windows 2000 1 Your video device driver needs an update to enable overlay support Contact the manufacturer of your video adapter or your computer for updates Some device drivers are provided on the IBM CD RW amp DVD ROM Software and User s Guide CD 2 The resolution of your screen might be too high Try setting the resolution to
8. only device on the secondary IDE connector you will use the master configuration setting If there is another device on the secondary connector in addition to the CD RW DVD ROM Combination Drive you will use the subordinate configuration setting If you must attach the CD RW DVD ROM Combination Drive to the same IDE connector as a faster device such as a hard disk drive use the subordinate setting for the CD RW DVD ROM Combination Drive and the master setting for the faster device In some instances the hard disk drive might require a master with subordinate present setting when another device on the same cable is configured as a subordinate For further information on setting configuration jumpers on other devices refer to the documentation that came with your computer or with the device in question Some non IBM computers support the cable select setting where the position of the device on the cable determines whether a device is master or subordinate See the documentation that comes with your computer to determine if your system supports this setting Installation and user s guide 1 5 Step 4 Mounting the drive in the bay Attention Be sure to use the mounting screws in the option package when you are driving screws directly into the drive Using screws that are too long might damage the drive You can mount the CD RW DVD ROM Combination Drive horizontally or vertically in the computer If you mount the drive vertically you
9. Windows Me Windows 95 or Windows 98 if you use the CLOSE DISC button when ejecting a DLA created disc A UDF reader might be required when using other operating systems to read unclosed media CD R discs are playable on audio CD players CD RW discs are not playable on most audio CD players Note CD RW media is rated by write speed Do not attempt to write high speed CD RW media with this drive Drive Media Write Read Low speed Low speed Yes Yes Low speed High speed No Yes Viewing a DVD movie After you have installed the CD RW DVD ROM Combination Drive configured DMA and installed DVD viewing software you can view a DVD movie DVD Express will start automatically when you insert a DVD If you want to start DVD Express manually follow these instructions 1 Click Start click Programs and click Mediamatics DVD Express 2 Click Mediamatics DV Matics The DVD movie player window opens For more information on how to use the DVD movie player refer to the DVD Express online help by pressing F1 DVD region codes Region codes help protect the contents of a DVD from unauthorized duplication The world is divided into six regions and the MPEG 2 decoding software contains a region code setting that corresponds to the region in which the drive will be used Typically each DVD is manufactured with a region code setting so that it can be viewed only on a DVD drive that has that same region code s
10. also need to refer to your computer operating system or sound adapter documentation Review the following list for any problem description that might fit your situation Your computer or CD RW DVD ROM Combination Drive does not operate correctly or the busy indicator light does not come on Take the following actions 1 2 Check that the disc is loaded with the label side up Check that all devices are properly connected to the computer and to the electrical outlet Turn off the computer unplug the cables for your computer and all attached devices and remove the computer cover Check that all power and IDE cables are securely attached Disconnect the IDE cable and check for bent or misaligned pins If you do not find any problems reconnect the interface cable Replace the computer cover and reattach all cables and power cords Turn on the computer restart the operating system and attempt to open the loading tray by pressing the Open Close button If the tray fails to open and the Busy indicator does not light turn off the computer and try using another 4 pin dc power cable Check that the color coded edge on the IDE cable aligns with pin 1 on the IDE connector and is closest to the power cable on mE CD SM ROM Combination Drive See Check the CD RW DVD ROM Combination Drive and any other device on the IDE cable for the proper settings If the middle connector on the IDE cable is attached to the IDE connector
11. appropriate instructions for enabling DMA which are included in 1 Click Start click Settings and then click Control Panel 2 Double click System and read the version number under System If your operating system version number is 4 00 950B or 4 00 95C follow The IBM CD RW amp DVD ROM Software and User s Guide CD contains several IDE bus master drivers in the DRIVERS ATAPI directory These are used to support DVD Video playback under Windows NT 4 0 Consult your system manual and the README file in the driver directory to determine if your system supports one of these device drivers Using CD R and CD RW discs The CD RW DVD ROM Combination Drive can write to both CD R and CD RW discs CD RW discs can be erased and reused many times CD R discs can be written to only once MyCD is used to copy CDs create new data CDs and produce new audio CDs that can be read by standard CD RW drives and CD players DLA is used to make file archives and data CDs that can be altered many times It also provides the convenience of direct drive letter access When used with CD RW media DLA is very much like using a diskette to store files If DLA is used with CD R media you can write and rewrite until the CD is full Installation and user s guide 1 9 and then the data becomes fixed DLA created media can be read only with newer CD ROM drives and DVD ROM drives that support multi read mode No UDF reader is required for Windows NT 4 0
12. enforce all your and IBM s rights duties and obligations arising from or relating in any manner to the subject matter of this Agreement without regard to conflict of law principles Any disputes arising from or in connection with this Agreement will first be resolved by friendly negotiations failing which either of us has the right to submit the dispute to the China International Economic and Trade Arbitration Commission in Beijing the PRC for arbitration in accordance with its arbitration rules in force at the time The arbitration tribunal will consist of three arbitrators The language to be used therein will be English and Chinese An arbitral award will be final and binding on all the parties and will be enforceable under the Convention on the Recognition and Enforcement of Foreign Arbitral Awards 1958 The arbitration fee will be borne by the losing party unless otherwise determined by the arbitral award During the course of arbitration this Agreement will continue to be performed except for the part which the parties are disputing and which is undergoing arbitration EUROPE MIDDLE EAST AFRICA EMEA THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES The terms of this Statement of Limited Warranty apply to Machines purchased from IBM or an IBM reseller Warranty Service Appendix E Product warranty and notices E 7 If you purchase an IBM Machine in Austria Belgium Denmark Estonia Finland France Germa
13. us arising from or relating in any manner to the subject matter of this Statement without regard to conflict of laws principles as well as Country unique terms and competent court for this Statement are those of the country in which the warranty service is being provided except that in 1 Albania Bosnia Herzegovina Bulgaria Croatia Hungary Former Yugoslav Republic of Macedonia Romania Slovakia Slovenia Armenia Azerbaijan Belarus Georgia Kazakhstan Kyrgyzstan Moldova Russia Tajikistan Turkmenistan Ukraine and Uzbekistan the laws of Austria apply 2 Estonia Latvia and Lithuania the laws of Finland apply 3 Algeria Benin Burkina Faso Cameroon Cape Verde Central African Republic Chad Congo Djibouti Democratic Republic of Congo Equatorial Guinea France Gabon Gambia Guinea Guinea Bissau Ivory Coast Lebanon Mali Mauritania Morocco Niger Senegal Togo and Tunisia this Agreement will be construed and the legal relations between the parties will be determined in accordance with the French laws and all disputes arising out of this Agreement or related to its violation or execution including summary proceedings will be settled exclusively by the Commercial Court of Paris 4 Angola Bahrain Botswana Burundi Egypt Eritrea Ethiopia Ghana Jordan Kenya Kuwait Liberia Malawi Malta Mozambique Nigeria Oman Pakistan Qatar Rwanda Sao Tome Saudi Arabia Sierra Leone Somalia Tanzania Uganda United A
14. 1 either repair or exchange the failing Machine and 2 provide the service either at your location or a service center IBM or your reseller will also manage and install selected engineering changes that apply to the Machine Some parts of IBM Machines are designated as Customer Replaceable Units called CRUs e g keyboards memory or hard disk drives IBM ships CRUs E 2 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide to you for replacement by you You must return all defective CRUs to IBM within 30 days of your receipt of the replacement CRU You are responsible for downloading designated Machine Code and Licensed Internal Code updates from an IBM Internet Web site or from other electronic media and following the instructions that IBM provides When warranty service involves the exchange of a Machine or part the item IBM or your reseller replaces becomes its property and the replacement becomes yours You represent that all removed items are genuine and unaltered The replacement may not be new but will be in good working order and at least functionally equivalent to the item replaced The replacement assumes the warranty service status of the replaced item Many features conversions or upgrades involve the removal of parts and their return to IBM A part that replaces a removed part will assume the warranty service status of the removed part Before IBM or your reseller exchanges a Machine or part you agree to remo
15. 800 x 600 x 16 bpp at 60 Hz DVD movies do not start automatically when inserted into the CD RW DVD ROM Combination Drive 1 Autoplay is turned off Follow these instructions to turn on Autoplay a Click Start then click Control Panel and then click Device Manager b Check Auto Insert Notification 2 DVDs that contain both programs and DVD Video content will autoplay the program content To view the video content start DVD Express For more information on starting DVD Express manually see Video appears to be choppy or is dropping frames 1 Ensure that DMA is enabled on for your computer hard disk drive controller Appendix B Problem solving B 3 3 The resolution of your screen might be too high Try setting the resolution to 800 x 600 x 16 bpp at 60 Hz If your computer microprocessor has less power than a Pentium II 450 microprocessor some jerkiness is normal on certain DVDs Cannot read CD media data or audio on Windows 2000 or Windows NT systems without restarting the system 1 B 4 IBM Rapid Access II Keyboard device driver might be interfering with the operation of the CD drive a Remove the Rapid Access II Keyboard device driver through Add Remove programs in the Control Panel b If you have a Rapid Access II Keyboard and want to restore its function you will need to go to the IBM Support Web site to download the latest device drivers Version 1007 or later IBM 8x4x32x8 CD RW DVD ROM
16. BO MPOAYKT npouurajre nH bopmannjara 3a Oe36e1Hocr Lees voordat u dit product installeert eerst de veiligheidsvoorschriften Les sikkerhetsinformasjonen Safety Information fer du installerer dette produktet Przed zainstalowaniem tego produktu nalezy zapozna sie z ksiazka Informacje dotyczace bezpieczenstwa Safety Information O Copyright IBM Corp 2001 iii Antes de instalar este produto leia as Informa es sobre Seguranca llepen ycraHoBkol nponykra npourure NHCTPyKumu DO TexHMke 6esonacHoctu Pred inStalaciou tohto zariadenia si peCitaje Bezpecnostn predpisy Pred namestitvijo tega proizvoda preberite Varnostne informacije Antes de instalar este producto lea la informaci n de seguridad Las s kerhetsinformationen innan du installerar den har produkten REA RAN FANS RARA gt iv IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Contents Safety read first About this book Registering your option Installation and user s guide Product description Installation requirements Before you begin Handling precautions Drive controls and connectors Installing the drive Step 1 Opening the comptiter Step 2 Unpacking the drive Step 3 Selecting an IDE connector Step 4 Mounting the drive in the bay Step 5 Attaching the cables to the drive Step 6 Completing the hardware installation Step 7 Updating your computer configuration Step 8 Installing the CD RW a
17. Combination Drive User s Guide Appendix C Customizing the device driver configuration settings Windows 95 Windows 98 and Windows Me have two device driver configuration parameters Auto Insert Notify and DMA The Auto Insert Notify parameter enables the computer to start playing or accessing the disc automatically after being inserted in the drive The DMA parameter improves computer performance by having the computer DMA controller handle data transfers from the CD to memory freeing the computer microprocessor to perform more important tasks For example activating DMA might make movies and games run more smoothly because the microprocessor will be allocating more processing time to video Changing the Auto Insert Notify and DMA parameters for Windows 95 Windows 98 and Windows Me To change these parameter settings from the Windows 95 Windows 98 or Windows Me desktop 1 Click Start gt Settings gt Control Panel 2 Double click System 3 Click the Device Manager tabs 4 Double click CD ROM Select the device driver for the CD RW DVD ROM Combination Drive Click Properties Click Settings tab 7 Select or clear the Auto insert notification check box the DMA check box or both 8 Click OK on Enabling DMA for Windows 2000 To change the DMA parameter setting for Windows 2000 do the following 1 Select Start gt Settings gt Control Panel Double click System Click the Hardware tab
18. D to support traditional CD authoring Veritas Drive Letter Access DLA to support drag and drop CD recording To install these applications perform the following steps 1 Insert the IBM CD RW amp DVD ROM Software and User s Guide CD into your CD RW DVD ROM Combination Drive A browser automatically starts 2 If the browser does not start open a command window and enter the following for each application where e is the drive letter of your CD RW DVD Combination Drive DVD Express e DVDPLAYR SETUP EXE Veritas DLA e RECORDER DLA SETUP EXE Veritas MyCD e RECORDER MYCD SETUP EXE 3 In the browser click Install MyCD click Install DLA and then click Install DVD Express 4 Restart the operating system on your computer 1 8 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide The IBM CD RW amp DVD ROM Software and User s Guide CD contains several video device drivers in the DRIVERS VIDEO directory These can be useful if you are having difficulty playing back DVD videos Before using them consult your system manual to determine what video hardware you have To install them use the Add New Hardware feature of your operating system Step 9 Setting up your computer for DVD video playback This section provides instructions on enabling DMA settings so you can play DVD movies with your DVD ROM drive Enabling the DMA settings Check the version number of your operating system and then follow the
19. ED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES APPLY AFTER THAT PERIOD Items Not Covered by Warranty IBM does not warrant uninterrupted or error free operation of a Machine Any technical or other support provided for a Machine under warranty such as assistance via telephone with how to questions and those regarding Machine set up and installation will be provided WITHOUT WARRANTIES OF ANY KIND Warranty Service To obtain warranty service for a Machine contact IBM or your reseller If you do not register your Machine with IBM you may be required to present proof of purchase During the warranty period IBM or your reseller if approved by IBM to provide warranty service provides without charge certain types of repair and exchange service to keep Machines in or restore them to conformance with their Specifications IBM or your reseller will inform you of the available types of service for a Machine based on its country of installation At its discretion IBM or your reseller will
20. IBM 8x4x32x8 CD RW DVD ROM Combination Drive Users Guide OPTIONS by IBM Note Before using this information and the product it supports read the information First Edition May 2001 Copyright International Business Machines Corporation 2001 All rights reserved US Government Users Restricted Rights Use duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp Safety read first Before installing this product read the Safety Information A ad cda bel A CMS ne Antes de instalar este produto leia as Informa es de Seguran a ELA BU ATARE Safety Information 24448 Prije instalacije ovog produkta obavezno pro itajte Sigurnosne Upute P ed instalac tohoto produktu si p e t te p ru ku bezpe nostn ch instrukc L s sikkerhedsforskrifterne f r du installerer dette produkt Ennen kuin asennat t m n tuotteen lue turvaohjeet kohdasta Safety Information Avant d installer ce produit lisez les consignes de s curit Vor der Installation dieses Produkts die Sicherheitshinweise lesen Mpv eykataot oete To ripoi v aut diaBdote TIG rnpogop eq aoMaAEiac safety information Jnmean MATNA NX XIP 07 WWM wpnnw 7397 A term k telep t se el tt olvassa el a Biztons gi el r sokat Prima di installare questo prodotto leggere le Informazioni sulla Sicurezza AMOS REM BEC ESL EMSS SAoDI Hol ta SPS HOMO Ipex aa ce MHCTAJIMPA O
21. ULAR PURPOSE Some states do not allow disclaimer of express or implied warranties in certain transactions therefore this statement may not apply to you This information could include technical inaccuracies or typographical errors Changes are periodically made to the information herein these changes will be incorporated in new editions of the publication IBM may make improvements and or changes in the product s and or the program s described in this publication at any time without notice IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you Any references in this publication to non IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk This IBM hardware product and IBM software products that might be packaged with it have been designed when used in accordance with their associated documentation to process date data correctly within and between the 20th and 21st centuries provided all other products for example software hardware and firmware used with these products properly exchange accurate date data with them IBM cannot take responsibility for the date data processing capabilities of non IBM products even if those products are preinstalled or otherwise d
22. coded edge is closest to the power cable connector J Use the IDE cable that is provided with this option if there is no cable attached to the IDE connector The IDE cable can have up to three connectors For the best signal quality when you are connecting only one device to the IDE cable connect one end of the cable to the IDE connector and connect the other end of the cable to the device Do not use the middle connector Use the IDE cable that is provided with this option if there is no cable attached to the computer IDE connector or if there is only one device connector on the computer IDE cable If you are connecting two devices to the IDE cable connect one end of the cable to the IDE connector and connect the master and subordinate devices to the remaining connectors on the other end Many computers have two cables for attaching up to four ATA devices For best performance attach fast devices such as hard disk drives to the cable that is connected to the primary IDE connector and connect the CD RW DVD ROM Combination Drive or other slower devices such as CD ROM drives tape drives and removable media to the cable that is connected to the secondary IDE connector 3 Attach a four pin power cable Ej to the power connector on the CD RW DVD ROM Combination Drive Be sure that the cables will not be pinched or crowded by the computer cover and that all other cable and power connections are secure Step 6 Completing the hardware
23. dings shall be conducted including all documents presented in such proceedings in the English language The number of arbitrators shall be three with each side to the dispute being entitled to appoint one arbitrator The two arbitrators appointed by the parties shall appoint a third arbitrator before proceeding upon the reference The third arbitrator shall act as chairman of the proceedings Vacancies in the post of chairman shall be filled by the president of the ICC Other vacancies shall be filled by the respective nominating party Proceedings shall continue from the stage they were at when the vacancy occurred If one of the parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date the other party appoints its the first appointed arbitrator shall be the sole arbitrator provided that the arbitrator was validly and properly appointed The English language version of this Agreement prevails over any other language version HONG KONG AND MACAU Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of Hong Kong Special Administrative Region INDIA Limitation of Liability The following replaces items 1 and 2 of this Section 1 liability for bodily injury including death or damage to real property and tangible personal property will be limited to that caused by IBM s negligence 2 as to any other actual damage arising in any si
24. e basis on which you are entitled to claim damages from IBM including fundamental breach negligence misrepresentation or other contract or tort claim except for any liability that cannot be waived or limited by applicable laws IBM is liable for no more than 1 damages for bodily injury including death and damage to real property and tangible personal property and 2 the amount of any other actual direct damages up to the charges if recurring 12 months charges apply for the Machine that is subject of the claim For purposes of this item the term Machine includes Machine Code and Licensed Internal Code This limit also applies to IBM s suppliers and your reseller It is the maximum for which IBM its suppliers and your reseller are collectively responsible UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING 1 THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE 2 LOSS OF OR DAMAGE TO YOUR RECORDS OR DATA OR 3 SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES LOST PROFITS OR LOST SAVINGS EVEN IF IBM ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU Governing Law Both you and IBM consent to the application of the laws of the country in which you acq
25. ed architecture XA discs such as the Kodak Photo CD This drive delivers data at up to 32 times the standard CD ROM drive speed 32X for CD ROM and CD R media This drive delivers data at up to 8 times the standard DVD ROM drive speed 8X for DVD media This drive is designed for installation in a personal computer that uses integrated drive electronics IDE or enhanced IDE EIDE architecture Copyright IBM Corp 2001 1 1 Installation requirements Be sure that your computer meets the following system requirements before installing the drive Minimum microprocessor Intel Pentium 133 MHz Intel Pentium II 233 MHz for MPEG 2 playback Minimum RAM 32 MB Windows 98 Windows 95 OSR2 Windows 2000 Windows NT 4 0 or Windows Me operating system An available half high drive bay An available IDE connection 40 MB available hard drive space 700 MB available hard drive space for CD copy function Audio solution supporting 44 1 or 48 kHz sampling rate Optional stereo speakers 2X AGP video with overlay support for MPEG 2 playback Before you begin Before you install the CD RW DVD ROM Combination Drive read the information in this section on handling precautions and on using the drive controls and connectors Handling precautions Use the following handling precautions to protect your drive Keep the CD RW DVD ROM Combination Drive in the antistatic bag until you are ready to install the drive Limit your movem
26. ent when installing movement can cause static electricity buildup Handle the drive with care Dropping or jarring the drive can damage the components inside the drive housing Do not force insertion of the IDE or power cables Doing so might damage the connector or the drive 1 2 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Drive controls and connectors The following diagrams show the location and functions of the drive controls and connectors Front view of the drive Gi gt en ca L H A H n Disc drawer This drawer is where you load and unload a disc H Busy indicator This light comes on when the drive reads from or writes to a disc Emergency eject hole This hole provides access to the eject mechanism to remove a disc from the drive El Open Close button This button opens and closes the disc drawer when you push it Installation and user s guide 1 3 Rear view of the drive Pin 1 888 0 00 0 ua 0000 Audio out connector This connector transmits the analog audio signals to an audio adapter H Configuration pins These pins are used to set the drive configuration IDE connector This connects the CD RW DVD ROM Combination Drive to the IDE cable El Power connector This connects the CD RW DVD ROM Combination Drive to the power cable Installing the drive Follow these steps to instal
27. ers do not support CD recordable devices Note Some drivers are provided on the IBM CD RW amp DVD ROM Software and User s Guide CD The following is a list of manufacturer Web sites that contain Windows NT 4 0 DMA device drivers IBM http www ibm com Intel http www intel com VIA http via com tw ALi http ali com tw C 2 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Appendix D Help and service information This section contains information on how to obtain warranty information on the World Wide Web and online and telephone technical support Warranty information on the World Wide Web The IBM Machine Warranties Web site at http www ibm com servers support machine warranties contains a worldwide overview of the IBM Limited Warranty for IBM Machines a glossary of terms used in the Statement of Limited Warranty Frequently Asked Questions FAQ and links to Product Support Web pages The IBM Statement of Limited Warranty is available from this Web site in 29 languages in Portable Document Format PDF Online technical support Online technical support is available during the life of your product Online assistance can be obtained through the Personal Computing Support Web site and the IBM Automated Fax System Online technical support IBM Personal Computing Support Web site http www ibm com pc support IBM Automated Fax System 1 800 426 3395 U S and Canada
28. ervices Act 1980 are hereby excluded Limitation of Liability The following replaces items one and two of the first paragraph of this Section 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence and 2 the amount of any other actual direct damages up to 125 percent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim Applicability of suppliers and resellers unchanged The following paragraph is added at the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in respect of any default shall be limited to damages ITALY Limitation of Liability The following replaces the second sentence in the first paragraph In each such instance unless otherwise provided by mandatory law IBM is liable for no more than 1 unchanged 2 as to any other actual damage arising in all situations involving nonperformance by IBM pursuant to or in any way related to the subject matter of this Statement of Warranty IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim Applicability of suppliers and resellers unchanged The following replaces the third paragraph of this Section Unless otherwise provided by mandatory law IBM and your reseller are not liable for any of the following items 1 and 2 unc
29. es and connectors or Appendix E Product warranty and notices E 13 by unauthorized changes or modifications to this equipment Unauthorized changes or modifications could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Responsible party International Business Machines Corporation New Orchard Road Armonk NY 10504 Telephone 1 919 543 2193 Tested To Comply C With FCC Standards FOR HOME OR OFFICE USE Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES 003 Avis de conformite a la reglementation d Industrie Canada Cet appareil num rique de classe B est conforme la norme NMB 008 du Canada Deutsche EMV Direktive electromagnetische Vertraglichkeit Dieses Ger t ist berechtigt in bereinstimmung mit dem deutschen EMVG vom 9 Nov 92 das EG Konformitatszeichen zu f hren Der Aussteller der Konformit tserkl rung ist die IBM UK Greenock Dieses Ger t erf llt die Bedingungen der EN 55022 Klasse B European Union emission directive This product is in conformity with the protection requirements of EU Council Directive 89 366 ECC on the approximation of the laws of the Member S
30. etting The region code setting of the DVD is indicated by a region code symbol on the back of the packaging The following table lists the six region codes and their corresponding region code symbol 1 10 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Region code Region U S Canada Europe Middle East South Africa Japan Southeast Asia Taiwan Korea Former Soviet Union the rest of Africa India 1 2 3 4 Latin America Australia New Zealand 5 6 People s Republic of China You will be prompted for the initial region selection If you insert a DVD with a different region code than the initial region code DVD Express will ask if you want to change the region code setting You can change the region code from your initial setting up to four times after setting the initial region code After the region code has been changed from its initial setting four times it is fixed and can no longer be changed To change the region code you must have a DVD with the new region code settings To display the region code status follow these instructions 1 In the DVD Express window click DVD Options 2 Click DVD Region Care and maintenance This section includes information on taking care of your CD RW DVD ROM Combination Drive and the CDs and DVDs that you use with the drive Caring for a CD or DVD Digital discs are high density media that must be handled with care and kept clean to e
31. hanged 3 indirect damages even if IBM or your reseller is informed of their possibility SOUTH AFRICA NAMIBIA BOTSWANA LESOTHO AND SWAZILAND E 10 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Limitation of Liability The following is added to this Section IBM s entire liability to you for actual damages arising in all situations involving nonperformance by IBM in respect of the subject matter of this Statement of Warranty will be limited to the charge paid by you for the individual Machine that is the subject of your claim from IBM UNITED KINGDOM Limitation of Liability The following replaces items 1 and 2 of the first paragraph of this Section 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence 2 the amount of any other actual direct damages or loss up to 125 percent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim The following item is added to this paragraph 3 breach of IBM s obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982 Applicability of suppliers and resellers unchanged The following is added to the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in respect of any default shall be limited to damages This publicati
32. he original packing materials to ensure that the drive is transported safely Manually ejecting a disc If a drive becomes defective and will not allow the disc to eject turn off the computer and straighten a large paper clip to form a tool The straightened end must extend at least 45 mm 1 8 in Insert the extended end into the emergency eject hole on the front of the drive see Front view of the drive on page 1 3 Push the paper clip until the tray opens Gently pull out the tray until you can remove the disc Formatting CDs You must format a blank CD RW disc using DLA before you can drag and drop files to the disc To format a CD RW disc with the DLA program 1 Insert a blank disc 2 Double click My computer 1 Some CDs such as multi session CDs do not require formatting For more information see the Veritas software online user s guide 1 12 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Note Formatting is completed in approximately 45 minutes The MyCD program configures the disc to receive data verifies the integrity of the disc surface and writes MyCD file system structures to the disc You can do other tasks on your computer while the disc is being formatted 3 Right click on the CD RW icon 4 Click Format 5 Type the title of your disc in the Volume Label window The disc name can be up to 11 characters 6 If you plan to use data compression with this disc select the Enable compres
33. installation 1 Be sure that the CD RW DVD ROM Combination Drive is securely mounted and that the connectors are firmly attached 2 Be sure that the cables do not interfere with the computer cover and that they do not block the power supply fan blades or airflow paths Installation and user s guide 1 7 3 Reinstall the computer cover 4 Reconnect all external devices 5 Plug all power cords into the electrical outlets Step 7 Updating your computer configuration After you have completed the hardware installation restart your computer Usually the configuration setup information screen is displayed when you turn on your computer If you do not see this screen check your computer documentation for information about accessing the configuration or setup utility program To see the configuration information for most IBM computers press F1 during startup when the IBM graphic is displayed in the upper right corner of the screen When you have finished reviewing the information save the changes and exit Step 8 Installing the CD RW and DVD software There are three software applications that you must install in order to use the CD RW and DVD video functions of your drive All of these are included on the IBM CD RW amp DVD ROM Software and User s Guide CD The IBM CD RW amp DVD ROM Software and User s Guide CD contains the following software applications Mediamatics DVD Express to support DVD video playback Veritas MyC
34. istributed by IBM You should contact the vendors responsible for those products directly to determine the capabilities of their products and update them if needed This IBM hardware product cannot prevent errors that might occur if software upgrades or peripheral devices you use or exchange data with do not process date data correctly The foregoing is a Year 2000 Readiness Disclosure Any performance data contained herein was determined in a controlled environment Therefore the result obtained in other operating environments may vary significantly Some measurements may have been made on development level systems and there is no guarantee that these measurements will be the same on generally available systems Furthermore some measurements may have been estimated through E 12 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide extrapolation Actual results may vary Users of this document should verify the applicable data for their specific environment Trademarks The following terms are trademarks of the IBM Corporation in the United States or other countries or both IBM HelpCenter Microsoft Windows and Windows NT are trademarks of Microsoft Corporation in the United States other countries or both Intel and Pentium are trademarks of Intel Corporation in the United States other countries or both Other company product and service names may be trademarks or service marks of others Electronic Emission notices
35. l the CD RW DVD ROM Combination Drive Step 1 Opening the computer 1 Turn off the computer and all attached devices 2 Unplug all power cords from the computer and all attached devices 3 Remove the cover from the computer Refer to your computer documentation for instructions on removing the computer cover Step 2 Unpacking the drive 1 Before opening the antistatic bag that the drive is packed in touch the bag to an unpainted metal surface for at least two seconds This drains the static electricity from the package and your body 2 Remove the drive from the bag If you must put the drive down place the antistatic bag on a flat padded surface such as a magazine and place the drive on the antistatic bag 1 4 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Step 3 Selecting an IDE connector Newer computers typically have two IDE connectors If your computer has two IDE connectors use the secondary IDE connector to connect the CD RW DVD ROM Combination Drive Typically the secondary IDE connector is adjacent to the primary IDE connector that connects to your hard disk drive The IDE connector you select and the cable position you select will determine which configuration jumper setting you will use for the drive If you have two IDE connectors connect the CD RW DVD ROM Combination Drive to the secondary IDE connector with the IDE cable that comes with your drive If the CD RW DVD ROM Combination Drive is the
36. llowing warranties apply only in the country where you acquire the Machine Nothing in this Statement of Limited Warranty affects any statutory rights of consumers that cannot be waived or limited by contract If you have any questions contact IBM or your reseller The IBM Warranty for Machines IBM warrants that each Machine 1 is free from defects in materials and workmanship and 2 conforms to IBM s Official Published Specifications Specifications The warranty period for a Machine is a specified fixed period commencing on its Date of Installation The date on your sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise If a Machine does not function as warranted during the warranty period and IBM or your reseller are unable to either 1 make it do so or 2 replace it with one that is at least functionally equivalent you may return it to your place of purchase and your money will be refunded Extent of Warranty Copyright IBM Corp 2001 E 1 The warranty does not cover the repair or exchange of a Machine resulting from misuse accident modification unsuitable physical or operating environment improper maintenance by you or failure caused by a product for which IBM is not responsible The warranty is voided by removal or alteration of Machine or parts identification labels THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLI
37. munication autoris s Unione Europea Directiva EMC Conformidad lectromagn tica Este producto satisface los requisitos de protecci n del Consejo de la UE Directiva 89 336 CEE en lo que a la legislatura de los Estados Miembros sobre compatibilidad electromagn tica se refiere IBM no puede aceptar responsabilidad alguna si este producto deja de satisfacer dichos requisitos de protecci n como resultado de una modificaci n no recomendada del producto incluyendo el ajuste de tarjetas de opci n que no sean IBM Este producto ha sido probado y satisface los l mites para Equipos Inform ticos Clase B de conformidad con el Est ndar CISPR22 y el Est ndar Europeo EN 55022 Los l mites para los equipos de Clase B se han establecido para entornos residenciales t picos a fin de proporcionar una protecci n razonable contra las interferencias con dispositivos de comunicaci n licenciados Union Europea Normativa EMC Appendix E Product warranty and notices E 15 Questo prodotto conforme alle normative di protezione ai sensi della Direttiva del Consiglio dell Unione Europea 89 336 CEE sull armonizzazione legislativa degli stati membri in materia di compatibilit elettromagnetica IBM non accetta responsabilit alcuna per la mancata conformit alle normative di protezione dovuta a modifiche non consigliate al prodotto compresa l installazione di schede e componenti di marca diversa da IBM Le prove effettuate sul presente
38. must secure any discs that you place into the drive before the drive tray is closed or the CD RW DVD ROM Combination Drive will not be able to read the disc properly 1 Slide the drive into the bay Your computer might have specific required procedures for installing storage devices For more information on storage devices refer to the documentation that comes with your computer 2 Align the drive bay screw holes with the threaded holes in the drive housing or mounting bracket 3 Thread the screws in loosely to check their position Two screws are usually used on each side Verify that the alignment is correct then tighten the screws to secure the drive Do not overtighten Step 5 Attaching the cables to the drive The following diagram shows where to connect the cables to the drive 1 6 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide The following is an illustration of the internal audio cable that comes with your option package 1 The internal audio cable has a split connector end and a single connector end Connect one of the split connector ends PI to the audio out connector on the CD RW DVD ROM Combination Drive If you have another CD ROM CD RW or DVD ROM drive attach the other split connector end to the audio out connector on this drive Attach the single connector end to your sound adapter 2 Attach a 40 pin IDE cable connector H to the IDE connector on the drive Align the cable so that the color
39. nd DVD software Step 9 Setting up your computer for DVD video playback Using CD R and CD RW discs Vox Viewing a DVD movie DVD region codes Care and maintenance Caring for a CD or DVD Caring for the CD RW DVD ROM Combination Drive Manually ejecting a disc em BAe iR 3 Appendix A Product specifications Appendix B Problem solving Appendix C Customizing the device driver configuration settings Changing the Auto Insert Notify and DMA parameters for Windows 95 Windows 98 and Windows Me 5 m Ej an Sah dde CE te Enabling DMA for Windows 2000 Enabling DMA for Windows NT 4 0 Appendix D Help and service information Warranty information on the World Wide Web Online technical support Copyright IBM Corp 2001 vii vii 1 1 11 12 12 1 3 14 1 4 1 4 125 1 6 1 7 1 8 1 8 1 9 2 8 d9 1 10 1 10 1 11 1 11 1 12 1 12 A 1 B 1 C 1 Cl C4 C2 D 1 D 1 D 1 Telephone technical support D4 Appendix E Product warranty and notices EA IBM Statement of Limited Warranty E4 Part 1 General Terms E Part 2 Country unique Terms EA Trademarks E 13 Federal Communications Commission FCC statement E 18 vi IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide
40. nsure that they remain readable The following precautions help to prolong the life of your discs Attention Wiping a disc using a circular motion can damage the disc and cause data loss Handle the disc by the edges or the center hole Do not touch the surface of the disc To remove dust or fingerprints wipe the disc from the center to the edge with a soft lint free cloth Do not write on the surface Do not place the disc in direct sunlight Do not use commercial cleaners to clean the disc Do not bend the disc Installation and user s guide 1 11 Caring for the CD RW DVD ROM Combination Drive To protect your CD RW DVD ROM Combination Drive during operation observe the following precautions Do not move the drive when it is in use Doing so might cause data error or might damage the drive or discs Avoid exposing the drive to the following conditions High humidity High temperature Excessive dust Mechanical vibration Sudden shock or dropping Placement on an inclined surface Direct sunlight Sudden temperature changes Do not insert foreign objects into the drive Do not stack objects on the drive Do not remove the drive cover or attempt to service the drive Remove any discs from the disc drawer and make sure that the drawer is closed before moving the drive unit Keep the original packing materials If you need to ship the drive unit to a different location use t
41. ny Greece Iceland Ireland Italy Latvia Lithuania Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland or United Kingdom you may obtain warranty service for that Machine in any of those countries from either 1 an IBM reseller approved to perform warranty service or 2 from IBM If you purchase an IBM Personal Computer Machine in Albania Armenia Belarus Bosnia and Herzegovina Bulgaria Croatia Czech Republic Georgia Hungary Kazakhstan Kirghizia Federal Republic of Yugoslavia Former Yugoslav Republic of Macedonia FYROM Moldova Poland Romania Russia Slovak Republic Slovenia or Ukraine you may obtain warranty service for that Machine in any of those countries from either 1 an IBM reseller approved to perform warranty service or 2 from IBM If you purchase an IBM Machine in a Middle Eastern or African country you may obtain warranty service for that Machine from the IBM entity within the country of purchase if that IBM entity provides warranty service in that country or from an IBM reseller approved by IBM to perform warranty service on that Machine in that country Warranty service in Africa is available within 50 kilometers of an IBM authorized service provider You are responsible for transportation costs for Machines located outside 50 kilometers of an IBM authorized service provider Governing Law The applicable laws that govern interpret and enforce rights duties and obligations of each of
42. on the system board remove the connector and reattach the cable If there is only one device on the IDE connector attach the connector at one end of the cable to the IDE connector and the connector at the other end to the device leaving the middle connector if there is one open If there are two devices on the IDE connector attach the connector at one end of the cable to the IDE connector If there is a hard disk drive attach it to the connector at the other end of the cable and attach the CD RW DVD ROM Combination Drive to the middle connector O Copyright IBM Corp 2001 B 1 You cannot access the CD RW DVD ROM Combination Drive or the DVD ROM CD ROM icon is not displayed When the CD RW DVD ROM Combination Drive is properly installed a DVD ROM or CD ROM icon is displayed in the My Computer window Double click My Computer If a CD ROM icon is not displayed in the window that opens verify that the drive has been properly installed Verify that the configuration jumper is set properly Restart your computer If a drive icon is still not displayed continue with the following steps 1 Click Start click Settings and then click Control Panel Click System Click the Device Manager tab Double click View Devices by Type Ow P QUIS Select Hard Disk Controllers from the list displayed in the Device Manager window Verify that there are no conflicts with the controller The device status indicates whether the controller is w
43. on was developed for products and services offered in the U S A Notices IBM may not offer the products services or features discussed in this document in other countries Consult your local IBM representative for information on the products and services currently available in your area Any reference to an IBM product program or service is not intended to state or imply that only that IBM product program or service may be used Any functionally equivalent product program or service that does not infringe any IBM intellectual property right may be used instead However it is the user s responsibility to evaluate and verify the operation of any non IBM product program or service IBM may have patents or pending patent applications covering subject matter described in this document The furnishing of this document does not give you any license to these patents You can send license inquiries in writing to IBM Director of Licensing IBM Corporation North Castle Drive Armonk NY 10504 1785 Appendix E Product warranty and notices E 11 U S A The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON INFRINGEMENT MERCHANTABILITY OR FITNESS FOR A PARTIC
44. or warranty implied by the Trade Practices Act 1974 or other similar legislation IBM s liability is limited to the repair or replacement of the goods or the supply of equivalent goods Where that condition or warranty relates to right to sell quiet possession or clear title or the goods are of a kind ordinarily acquired for personal domestic or household use or consumption then none of the limitations in this paragraph apply Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of the State or Territory CAMBODIA LAOS AND VIETNAM Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of the State of New York The following is added to this Section Disputes and differences arising out of or in connection with this Agreement shall be finally settled by arbitration which shall be held in Singapore in accordance with the rules of the International Chamber of Commerce ICC The arbitrator or arbitrators designated in conformity with those rules shall have the power to rule on their own competence and on the validity of the Agreement to submit to arbitration The Appendix E Product warranty and notices E 5 arbitration award shall be final and binding for the parties without appeal and the arbitral award shall be in writing and set forth the findings of fact and the conclusions of law All procee
45. orking properly 6 Select CD ROM from the list that is displayed in the Device Manager window Verify that a CD ROM device is present in the list and that no conflicts exist The device status indicates whether the device is working properly 7 Click OK 8 Close all windows and restart the computer If the device icon is still not displayed check the cable connections and device jumper settings and resolve any conflicts that might exist The CD RW DVD ROM Combination Drive is not recognized by the operating system or the drive performs erratically Some computers have Compatible and High Performance modes for mass storage devices Normally the CD RW DVD ROM Combination Drive functions better under the High Performance mode However if your drive is not functioning properly in that mode you might need to use the Compatible mode Use the following procedure to check the configuration setup information for your computer 1 Access your system configuration utility program Pressing F1 at system startup does this on most IBM computers 2 Select Devices 3 Scroll down to the Mass Storage Devices section Refer to the documentation that comes with your computer for additional details on selecting IDE performance modes The disc cannot be read Take the following actions B 2 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide 1 The disc might be dirty clean it as described in l Caring for a CD od 2
46. prodotto hanno accertato che esso rientra nei limiti stabiliti per le le apparecchiature di informatica Classe B ai sensi del CISPR 22 Norma Europea EN 55022 I limiti delle apparecchiature della Classe B sono stati stabiliti al fine di fornire ragionevole protezione da interferenze mediante dispositivi di comunicazione in concessione in ambienti residenziali tipici 01 20Dl ASC ANI 48 ERES IISA CORES GERE SERE TS VCC 1 OREI HSC 7 2ABWHRG RECS EE ELTHETA CO RENI SAT LED a IBM LEEN E HEEE SRO ICE DUE EE GED CIE LUMRY RUS LT RAL Japanese statement of compliance for products less than or equal to 20 A per phase ARABIA NA ida E 16 IBM amp 4x32x8 CD RW DVD ROM Combination Drive User s Guide Part Number 22P6959 on recycled paper containing 10 e Printed in the United States of America recovered post consumer fiber 1P P N 22P6959
47. rab Emirates United Kingdom West Bank Gaza Yemen Zambia and Zimbabwe this Agreement will be governed by English Law and disputes relating to it E 8 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide will be submitted to the exclusive jurisdiction of the English courts and 5 in Greece Israel Italy Portugal and Spain any legal claim arising out of this Statement will be brought before and finally settled by the competent court of Athens Tel Aviv Milan Lisbon and Madrid respectively THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED AUSTRIA AND GERMANY The IBM Warranty for Machines The following replaces the first sentence of the first paragraph of this Section The warranty for an IBM Machine covers the functionality of the Machine for its normal use and the Machine s conformity to its Specifications The following paragraphs are added to this Section The minimum warranty period for Machines is six months In case IBM or your reseller is unable to repair an IBM Machine you can alternatively ask for a partial refund as far as justified by the reduced value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine and get your money refunded Extent of Warranty The second paragraph does not apply Warranty Service The following is added to this Section During the warranty period transportation for delivery of the failing Machine to IBM will be at IBM s expense
48. re installation instructions and operating information for the IBM 8x4x32x8 CD RW DVD ROM Combination Drive Product description This Option by IBM contains a unique multifunction drive that can read and write CD R and CD RW discs and can also read CD ROM DVD ROM and DVD R discs This kit also includes a CD containing an Online User s Guide MPEG 2 decoding software and CD recording software for Microsoft Windows 98 Windows 95 Microsoft Windows 2000 Professional Microsoft Windows NT 4 0 Workstation and Microsoft Windows Millennium Edition Me Your option package includes the following One IBM 8x4x32x8x CD RW DVD ROM Combination Drive One package of four mounting screws M3 x 5 mm slotted One 18 inch IDE cable One audio Y cable One IBM CD RW amp DVD ROM Software and User s Guide CD One Laser Safety Guide One Quick Installation Guide Contact your place of purchase if an item is missing or damaged Be sure to retain your proof of purchase it might be required to receive warranty service for technical support information Your drive can read many DVD and CD formats including DVD video video CD and audio CD formats It can also write most CD R recordable and CD RW rewritable formats You must install the included MPEG 2 decoding software to play DVD video files and you must install the included CD recording software to write CD R and CD RW discs The drive also reads multi session extend
49. sion on this disc check box 7 Click Start to start disc formatting and click OK when formatting is completed 8 Click OK when the format finished box appears You can now write information to the disc If you want to read a DLA formatted disc in another computer that has a multi read drive you might have to install a UDF reader program on the other computer Creating data CDs or backing up data files To create data CDs use the following procedure 1 Click Start gt Programs gt MyCD 2 Select the task you want to perform and follow the prompts Installation and user s guide 1 13 1 14 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Appendix A Product specifications This appendix includes the following information Physical specifications Power requirements Environmental requirements Read speeds Write speeds Physical specifications The physical specifications of the 8x4x32x8 CD RW DVD ROM Combination Drive are listed in the following table Physical specification Height 41 5 mm 1 63 in Width 145 mm 5 71 in Length 200 mm 7 87 in Weight 890 g 1 96 Ib Power requirements The following table lists the power specifications by voltage level for the 8x4x32x8 CD RW DVD ROM Combination Drive The power specifications are measured at the drive power connector and are nominal values Power Voltage AVG MAX specifications At
50. tates relating to electromagnetic compatibility E 14 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide IBM can not accept responsibility for any failure to satisfy the protection requirements resulting from a non recommended modification of the product including the fitting of non IBM option cards This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to CISPR 22 European Standard EN 55022 The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interference with licensed communication devices Union Europ enne Directive Conformit lectromagn tique Ce produit est conforme aux exigences de protection de la Directive 89 336 EEC du Conseil de l UE sur le rapprochement des lois des Etats membres en mati re de compatibilit lectromagn tique IBM ne peut accepter aucune responsabilit pour le manquement aux exigences de protection r sultant d une modification non recommand e du produit y compris l installation de cartes autres que les cartes IBM Ce produit a t test et il satisfait les conditions de l quipement informatique de Classe B en vertu de CISPR22 Standard europ en EN 55022 Les conditions pour l quipement de Classe B ont t d finies en fonction d un contexte r sidentiel ordinaire afin de fournir une protection raisonnable contre l interf rence d appareils de com
51. tuation involving nonperformance by IBM pursuant to or in any way related to the subject of this Statement of Limited Warranty IBM s liability will be limited to the charge paid by you for the individual Machine that is the subject of the claim JAPAN Governing Law The following sentence is added to this Section Any doubts concerning this Agreement will be initially resolved between us in good faith and in accordance with the principle of mutual trust E 6 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide NEW ZEALAND The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Consumer Guarantees Act 1993 or other legislation which cannot be excluded or limited The Consumer Guarantees Act 1993 will not apply in respect of any goods which IBM provides if you require the goods for the purposes of a business as defined in that Act Limitation of Liability The following is added to this Section Where Machines are not acquired for the purposes of a business as defined in the Consumer Guarantees Act 1993 the limitations in this Section are subject to the limitations in that Act PEOPLE S REPUBLIC OF CHINA PRC Governing Law The following replaces this Section Both you and IBM consent to the application of the laws of the State of New York except when local law requires otherwise to govern interpret and
52. uired the Machine to govern interpret and enforce all of your and IBM s rights duties and obligations arising from or relating in any manner to the subject matter of this Agreement without regard to conflict of law principles Part 2 Country unique Terms AMERICAS BRAZIL Governing Law The following is added after the first sentence Any litigation arising from this Agreement will be settled exclusively by the court of Rio de Janeiro NORTH AMERICA E 4 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Warranty Service The following is added to this Section To obtain warranty service from IBM in Canada or the United States call 1 800 IBM SERV 426 7378 CANADA Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws in the Province of Ontario UNITED STATES Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of the State of New York ASIA PACIFIC AUSTRALIA The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Trade Practices Act 1974 or other similar legislation and are only limited to the extent permitted by the applicable legislation Limitation of Liability The following is added to this Section Where IBM is in breach of a condition
53. ve all features parts options alterations and attachments not under warranty service You also agree to 1 ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange 2 obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own and 3 where applicable before service is provided a follow the problem determination problem analysis and service request procedures that IBM or your reseller provides b secure all programs data and funds contained in a Machine c provide IBM or your reseller with sufficient free and safe access to your facilities to permit them to fulfill their obligations and d inform IBM or your reseller of changes in a Machine s location IBM is responsible for loss of or damage to your Machine while it is 1 in IBM s possession or 2 in transit in those cases where IBM is responsible for the transportation charges Neither IBM nor your reseller is responsible for any of your confidential proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason You should remove all such information from the Machine prior to its return Limitation of Liability Circumstances may arise where because of a default on IBM s part or other liability you are entitled to recover damages from IBM In each such instance Appendix E Product warranty and notices E 3 regardless of th
54. voltage 5V dc 700 mA 1200 mA At voltage 12V dc 500 mA 900 mA 2 Product description data represents IBM s design objectives and is provided for comparative purposes actual results might vary based on a variety of factors This product data does not constitute a warranty Data is subject to change without notice O Copyright IBM Corp 2001 A 1 41 F to 113 F Specification Operational Nonoperational Temperature 5 C to 45 C 30 C to 60 C noncondensing 22 F to 140 F Relative humidity noncondensing 25 to 85 10 to 90 Read speeds Media Read Speed DVD single layer 3 3 to 8X Constant Angular Velocity CAV DVD dual layer 2 4 to 6X CAV DVD R 3 95 GB 1 5 to 3 5X CAV DVD R 4 7 GB 17 to 4 1X CAV CD ROM CD R 14 to 32X CAV CD RW ISO 9660 closed 10 to 24X CAV CD DA DAE 10 to 24X CAV Write speeds Media Write speeds CD R 8X Constant Linear Velocity CLV CD RW 4X CLV Note You can mount the drive vertically or horizontally A 2 IBM 8x4x32x8 CD RW DVD ROM Combination Drive User s Guide Appendix B Problem solving Computer problems can be caused by hardware software or user error Using the information in this section you might be able to solve problems yourself or gather helpful information that you can pass on to a service technician You might
Download Pdf Manuals
Related Search