Home

Graco Inc. 1095 Paint Sprayer User Manual

Contents

1. Key Learns Key Learn9 Key Learn10 lt Notes gt The key patterns that can be used for DSK Effect are 6001 6002 6003 6006 6007 and 6101 to 6634 Key patterns 4601 to 6716 can be used only when the 3D optional board AG VE70 has been installed 72 Key patterns Accordion Key Key Key Key Key Key Learn13 Learn15 Learn16 Learn18 Learn19 Learn20 DISS This denotes a pattern to which the dissolve effect can be applied EXP This denotes a pattern that appears bigger and bigger 73 About this software Description of the software System requirements The software contained in the CD is described below The PC to be used should meet the following requirements E USB driver e Computer DOS V with USB port This driver software is for
2. m SDI enabled as AG MX7 Through connection Video genlock G 0 source C Box camera SDI SDI IN2 geoeoe el gag EE moan ol e feo re gt ee Epi ee SDI INA are Pod i Audio Video Termination VTR Microphone PC with MX Navi already installed Example 2 Live application 2 Signal generator CPST mn 8 gt S3 Box camera a dn 9 pi Genlock enabled ADV REF as genlock source SDI Through connection m Video Box camera AG MX70 Tololololo gen oooo SDI Er Through connection Video PEIN SDI IN4 gt CEE oa Box camera EI LEE GI o ooo FS SDI pe eee ee Audio Video Termination VTR Microphone a PC with MX Navi already installed 18 System Diagram Example 3 Editing application controller uoIjoeuuoo y6noaur ybnoaur Genlock enabled as genlock source uoIjgauuoI E ooooo 2 SDI
3. DISS This denotes a pattern to which the dissolve effect can be applied 67 Key patterns BasicPattern ExpCurve2 Diss DualPinP lt Notes gt e The key patterns that can be used for DSK Effec are 6001 6002 6003 6006 6007 and 6101 to 6634 e BasicPattern Key Basic Key and Title are the key patterns for which Rev can be used Key patterns 4601 to 6716 can be used only when the 3D optional board AG VE70 has been installed 68 Key patterns Spot Light ExpCurve2 Diss DualPinP 3D Slide DISS
4. 217 218 1064 1065 Direct Pattern Overlap Diss Tumble Overlap DISS This denotes a pattern to which the dissolve effect can be applied 63 Transition patterns Overlap Diss Slide2 Overlap 2D Move1 Overlap Diss 2D Move2 Overlap Diss 2D Move2 Exp Curve2 Overlap Diss Rotate lt Notes gt e The 2D Move2 EXP patterns cannot be used for DSK effect The Slide1 Slide2 2D Move1 and 2D Move2 patterns can be used for DSK effect only when the 3D optional board AG VE70 has been installed e Transition patterns 1601 to 2617 can be used only when the 3D optional board AG VE70 has been installed 64 Transition patterns Bounce Overlap Diss 2D Move2
5. Overlap Diss 2D Move2 JExp Curve2 Overlap Diss Split Slide DISS This denotes a pattern to which the dissolve effect can be applied 65 Transition patterns Tumble lt Notes gt e The Flip Tumble Twist and Roll and Page1 2 3 patterns cannot be used for DSK Effect Transition patterns 1601 to 2617 can be used only when the 3D optional board AG VE70 has been installed 66 Transition patterns 3D DVE Ripple
6. ead 33 VIR Audio Video RS 422A Signal 2 amp SDI IN1 2S generator A SDI IN3 fp loolololol 85 a o E AG MX70 23 se Audio Video 3 3 Video camera SDI IN4 RS 422A as SDIOUT EL JBC S El spr AUX1 AUX2 He i Sse Audio Video Termination Video camera Analog audio signals 0 5 e a LU Tea CD player etc een PC with MX Navi already installed 1 Connection of the ADF REF signal is not absolutely essential but when this signal has been connected StillOff can be selected by the bus setting see page 56 on the Setup initial setting screen and input can be switched directly using the cross point button 2 ADV REF can also be used as an alternative to the G L loop through signal as the sync signal supplied to the AG A850 editing controller 19 Power supply and backup The operation panel settings are stored in the memory when the power is turned off The default settings are established when the power is turned back on by selecting Power Reset on the Setup initial setting screen and the system is started from the settings which were established at the completion of the previous session by selecting Power Preset If Demo has been selected on the Setup panel the demonstration mode is established when the power is turned on Select Reset or Preset on the Setup panel from the demonstration mode to resta
7. Multi V6 Multi HV3 Multi HV6 E EES Overlap Multi PairH3 Multi PairV3 Overlap 61 Transition patterns Multi PairH6 Multi PairV6 Multi PairHV3 Multi PairHV6 Overlap Basic2 Overlap DVE BPreset Overlap Shutter Overlap Direct Pattern Overlap Diss Overlap lt Notes gt e The DVE and Shutter patterns cannot be used for DSK effect The Comp1 and Comp2 patterns can be used for DSK effect only when the 3D optional board AG VE70 has been installed e Pattern MIX 56 is used for DVE BPreset 62 Transition patterns Multi PairH6 Multi PairV6 Multi HV3 Multi PairHV6 Panel Panel Setting Setting Basic2 4Multi 9Multi 16Multi Strob Strob
8. lt Note gt When Still is to be set to Off do not mix the analog and SDI signals for the input Be absolutely sure to use the analog only system or SDI only system 56 Setup initial setting screen Audio Level setting The Alignment alignment level is set using the rotary 2 R1 R2 R3 R4 R5 control 3 dB 0 dB or 4 dB can be selected The Audio Alignment Head default setting is 4 dB for NTSC and 0 dB for PAL Level 3dB 18dB The Head headroom is set using the rotary 5 control Either 18 dB or 20 dB can be selected The default ce s setting is 20 dB for NTSC and 18 dB for PAL 40B File setting The statuses set by Setup can be stored in the memory Bi Re Rg ne Rs Select 1 to 8 using the rotary 2 control An empty file is Empty indicated by Empty A file with settings is indicated by Saved Saved Select Save Recall or AIICLR using the rotary 3 control and execute using Enter Save saves the settings and overwrites any existing settings Recall loads the settings and All CLR clears the settings When Save or AIICLR is selected OK appears Enter the selection again using Enter or cancel using Shift Enter It is also possible to clear all the settings by holding down Shift Enter when the power is turned on so that the factory settings are restored 57 Other settings Event memory Setting me
9. View menu ICON view This switches the display mode for the main screen to icon mode The same operation can be performed by right clicking the data display and selecting View ICON view from the displayed pop up menu LIST view This switches the display mode for the main screen to icon mode The same operation can be performed by right clicking the data display and selecting View LIST view from the displayed pop up menu Sort by name This rearranges the data of the transmission list by the Name character order The same operation can be performed with the Al 3 buttons in the Name heading part of the data display Sort by comments This rearranges the transmission list by the Comment character order The same operation can be performed with the Al el buttons in the Comment heading part of the data display 84 Cursor menu Top This moves the cursor to the start of the transmission list The same operation can be performed with the operation button or with the HOME key Jump to 10th Previous This moves the cursor up 10 from the present position The same operation can be performed with the operation button W or with the Left arrow key Previous This moves the cursor up one from the present position The same operation can be performed with the operation button M or with the Up arrow key Next This moves the cursor down one from the present position The same operation
10. 0 255 0 255 R5 TransF transformation setting e With the flag group numbers 6002 6101 to 6139 R2 Width flag width setting R1 R2 R3 R4 R5 R3 Angle setting 3D Angle Time R4 Time fluttering time setting Modify 96 48 R5 Amp amplitude setting 0 255 0 255 0 255 0 255 e With the accordion group numbers 6003 6201 to 6239 R2 Width accordion width setting R3 Angle setting R1 R2 R3 R4 En 3D Anal Am R5 Amp amplitude setting act a a e With perspectives numbers 6006 and 6007 6601 to 0 255 0 255 0 255 6634 and 6501 to 6532 With door number 6004 to 6005 6701 to 6716 groups R1 R2 R3 R4 R5 R2 Rotate rotation setting 3D Rotate View Depth R3 Axis rotary axis setting Modify 128 128 64 R4 View viewer setting R5 Depth setting 0 255 0 255 0 255 O 255 6007 to 6007 All parameters can be set 6601 to 6634 Only View and Depth can be set 6501 to 6532 Only View and Depth can be set Door 6004 to 6005 Only Depth can be set 6701 to 6716 Only View and Depth can be set 40 Effect by effect setting screens e With the page turn group number 6008 R1 R2 R3 R4 R5 3D Rotate Turn R2 Rotate rotation setting Modify 128 64 R3 Angle setting R4 Turn setting 0 255 0 255 0 255 0 7 R5 Radius setting e With
11. Component Ps output 1 connector Component Pr output 1 connector YC output 1 connector Composite output 2 connector Component Y output 2 connector Component Ps output 2 connector Component Pr output 2 connector YC output 2 connector Parts and their functions Analog audio 1 input connectors The audio signals supplied to these connectors are input to the cross point selected on the initial setting page Analog audio 2 input connectors The audio signals supplied to these connectors are input to the cross point selected on the initial setting page Analog audio 3 input connectors The audio signals supplied to these connectors are input to the cross point selected on the initial setting page AUDIO OUT 1 Ci Q o I Analog audio 4 input connectors The audio signals supplied to these connectors are input to the cross point selected on the initial setting page Analog audio output connectors EDITOR interface connector 9 pin This connector is used to connect the unit with an RS 422A or RS 232C controller RS 422A RS 232C selector switch This is used to switch between the RS 422A and RS 232C control protocols SIGNAL GND ground terminal 16 TALLY output connector The rear panel tally is for the cross point 1 2 3 4 5 6 7 or 8 output The connector used by the cross point is turned ON AC IN power socket External interfaces This unit comes
12. nennen ennneerenenenvense 80 How to shut down MX Navi nannnenn en ennneeneen 80 Screen descriptions nnnnanennenannnene nennen 80 Main WINOW sie secetcccnccncceezccececcssecsaseacecssessnacecesenseeancctes 80 ICOM mode annen nenave eaaa 80 Listmode 55ste nneerenrennndeninnnnnsnnnd den ere 82 Menu descriptionS nnansssssnsennnnanannsenn 83 File Men aces cds csscce ds seeud see vennen nen senden hann envendeedn an Areau uaaa 83 Edit men snarssnsarrnerzensnnaneenenennnnannennenandrnanndnsannnan menen 83 VIEW MENU nersssvensenrensrnernenzenzankennmen ear senasscesececseaczeececess 84 Cursor MENU rasernensena senen rinenderendenninndeninmennsnnnkedann 84 Operation Menu ssnsssennerrserersenenenennenvaneensedennneizeneandtn 85 TOOl MENU s cccccccecessececcecesancnecesceceaacccaesenccnseacecesantectaeeian 85 Help Menu nnunnanerensnerensenennnenenensnerensenennnensvnnsnseennen 85 Title data operations nnannensensensanansen 86 Flow until Title data playback annava eeen 86 Registering Title data in the transmission list 86 Setting the Title data playback properties 86 Manual transmission and playback of Title data 88 Automatic transmission and playback of Title data 88 Clearing Title data cssscssssseesseeeeseessesnseesseeessees 88 Checking the Title data image nnnnnn aaneen 89 Reordering the transmission list ane 89
13. Field Frame e When Strobe has been selected al Re Rg na ig Set the number of strobe screens and the repeat Time Time operation using the rotary 4 control The default setting is Effects 10F 1 ni Select the strobe time setting from 2 to 124 using the a rotary 5 control The default setting is 20 The time o setting can be changed in 2 step increments 16 Select 4 to 16 for a once only still operation Select R4 R4 to R16 for repeat operations The number denotes R9 the number of screens At the Manual setting the screen R16 can be stopped by pressing the cross point Strobe button with the Shift key This time setting is used for the level of transition numbers 1062 1063 1064 and 1065 215 216 217 and 218 Still and strobe including multi strobe cannot be made to take effect at the same time as a 2 dimensionally compressed pattern lt Notes gt e Only one of three effects namely soft border or soft border for both multi strobe and pattern edges can be selected when any of the special patterns below have been selected The effect selected last takes precedence and the previously selected effect is canceled e 1541 to 1550 32 to 35 130 to 133 141 to 142 e 1601 to 2617 e 3303 3314 3324 3501 to 3378 e 4601 to 6716 e Only multi strobe or scene grabber can be selected The effect selected last takes precedence and the previously selected effect is canceled e Noise may remain on the scr
14. Stat Copyang Fins Renew sring beixe capyeng ther Setup han to eat Cope the progam lies V pou wert to reen oF emu rianan charge ry ings cick Back Ups ave sababad sath the saingi cick Mend to bagn After the files have been copied the installation end screen appears Installation is completed by clicking the Finish button now Operation confirmation This completes installation of all of the software Use the following procedure to confirm that the software has been installed correctly 1 Check that this column shows Connecting Confirm that the PC and the AG MX70 have been connected correctly and that the power of the AG MX70 is switched on Select Programs Panasonic AG MX70 MX Navi from the Windows Start menu MX Navi will start When the display column of the status bar on the left bottom of the main window of MX Navi shows Connecting it means that the software has been installed correctly lt Notes gt If Not connecting is shown check the following e PC and AG MX70 must be connected correctly e The power of the AG MX70 must be switched on e The length of the USB cable must be within 3 m When a USB hub is being used correct operation may be obtained when the hub is removed and the cable is connected directly to the USB port of the PC Startup and shutdown How to start up MX Navi Select Program Panasonic AG MX70
15. e 1501 to 1533 28 to 31 36 to 42 128 to 129 2Dcomp e 1301 to 1333 43 to 46 51 to 54 138 to 140 Slide e 1401 to 1498 143 to 182 2Dcomp Move e 3301 to 3303 3311 to 3313 3321 to 3323 3401 to 3478 2Dcomp Key e 3601 to 3623 Bounce keys e 1601 to 2999 Transition patterns e 4601 to 6999 Key patterns 29 Execution of Effects AB transition 1 Preparation Slide the transition lever to the A side 2 Input selection and preview Select the input source of the transition destination using the B bus cross point button The preview selection can now be set as ME and the images of the transition destination can be previewed at the Preview connector 3 Pattern selection Select the pattern using the direct transition button or using the number keys Patterns with numbers 2999 or lower are transition patterns Perform the border shadow trail and other settings on the LCD setting screen The separate border trail and other settings are stored in each direct button and read out 4 Execution Slide the transition lever to the opposite side or set the ME transition time and then press the Auto Take button To execute a transition from B to A set the A bus input in step 2 and follow the same procedure Preset program transmission 1 Preparation When the transition lever is slid all the way to one end the cross point button setting is switched over by Prog Preset 2 Input selection and preview Same as for AB tran
16. erating ructions Digital AV Mixer ac MDP Panasonic Before attempting to connect operate or adjust this product please read these instructions completely DYNAMIC ROUNDING CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A A CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance service instructions in the literature accompanying the appliance FCC Note This device complies with Part 15 of the FCC Rules To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications This equipment has been tested and found to comply with the limits for a class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency e
17. 2195 and 6008 to 6010 patterns cannot be selected Border Cyan When Soft Border has been selected the 701 to No 707 Soft Border Green 24 to 27 801 to 814 183 to 196 patterns cannot be Magenta selected Red The Width thickness can be set to any value from 1 to 255 Blue using the rotary 3 control The default setting is 16 Only 1 Black or 2 can be set for Width if any of the following patterns Custom1 have been selected Custom2 e No 701 to 707 24 to 27 801 to 814 183 to 196 Select the Color border color using the rotary 4 control White Yellow Cyan Green Magenta Red Blue Black Custom1 or Custom2 can be selected Custom1 and Custom2 are colors which have been set by INT Matte lt Note gt When the PinP pattern has been selected and STILL is executed through B bus the edge cannot be reflected 32 Effect by effect setting screens Effects setting This is used to perform the DVE settings Select the Off Shadow or Trail effect using the rotary 2 control Set the Light lighting using the rotary 5 control This is valid only when the 3D optional board AG VE70 has been installed for use e When Shadow has been set When Shadow has been selected the shadow position can be set by setting the position while holding down Shift In this case the center scene grabber and hold buttons flash temporarily e When Trail has been set Set the trail color a
18. Led Stby VBClean Off On Bus Type Siill Audio AB On CP Audio Alignment Level 4dB File Empty R1 R2 R3 R4 R5 Select the item to be set using the rotary 1 control Items consist of Power Direct Pattern Audio Video Memory Gen Lock Video Format System1 System2 Bus Audio Level and File The setup settings are not returned to the factory settings even if the system is started by Reset They can be restored to the factory settings by pressing Shift and Enter together when the power is turned on 51 Setup initial setting screen Power power ON setting Whether the system is to be started from the Reset status from the Preset status or in the Demo mode can be selected using the rotary 2 control With Reset the settings except for the event memories setup settings file memory and key learn settings are initialized With Preset the mode in which the system is started from the status prior to power OFF is established when the power is next turned on If no status prior to power OFF existed when for instance the system is used for the very first time after assembly or its memories have been destroyed the system is started from the factory setting status With Demo the system starts up in the demonstration mode when the power is next turned on This menu is displayed in the demonstration mode so that when the system is restarted by selecting Preset
19. MX Navi from the Windows Start menu How to shut down MX Navi Shutdown is possible in the following two ways e Click the button 21 at the right top of the main window e Select Exit from the File menu of the main window Screen descriptions Main window A list of Title data called the transmission list is displayed on the main window The main window of MX Navi has two display modes the icon mode and the list mode The modes can be switched using the view menu Icon mode Sg Mx navi manual View Cursor Operation Tdols Help bo MK WW ICON ON TYPE mm DISS STILL FILE 0000 tga For data with a Mark setting the Mark number is O Order displayed For details on Mark settings refer to page 87 The order of the data in the transmission list is displayed The color changes according to the title transmission This is displayed for data with the Protect setting For status details on the Protect setting refer to page 87 Not transmitted Dark gray Transmitted Light gray Transmission not possible Dark red insufficient MX70 memory 80 Screen descriptions D F The upper line shows the Divide value for the data and the lower line shows the number of images of the data ICON The image is reduced and displayed When several files are used with one title one of them will be used for the display The aspect ratio of the reduced image cha
20. Only one of the effects namely multi strobe decay trail or shadow hardware effect can be selected The effect selected last takes precedence and the previously selected effect is canceled 27 Video Effects setting screen 3D setting Select OFF Ripple Multi or Spark for 3D using the rotary 2 control This setting is only effective when the 3D optional board AG VE70 has been installed It cannot be made to take effect at the same time as 3D transition or key pattern The default setting is Off e When Ripple has been selected The extent of the Level effect can be set to any value from 0 to 255 using the rotary 3 control The default setting is 32 Time can be set to any value from O to 255 using the rotary 4 control The default setting is 64 Width can be set to any value from O to 5 using the rotary 5 control The default setting is 1 The ripple position can be set using joystick XY This level and other settings are used as the transition number 1981 settings e When Multi multi screen has been selected Size can be set to any value from O to 15 using the rotary 3 control The default setting is 8 Pitch can be set to any value from O to 255 using the rotary 4 control The default setting is 16 Reverse can be set to On or Off using the rotary 5 control The default setting is Off This level and other settings are used as the transition number 1983 settings e When Spa
21. This denotes a pattern to which the dissolve effect can be applied EXP This denotes a pattern that appears bigger and bigger 69 Key patterns lt Notes gt e The key patterns that can be used for DSK Effect are 6001 6002 6003 6006 6007 and 6101 to 6634 Key patterns 4601 to 6716 can be used only when the 3D optional board AG VE70 has been installed 70 Key patterns DISS This denotes a pattern to which the dissolve effect can be applied EXP This denotes a pattern that appears bigger and bigger 71 Key patterns Accordion
22. Windows wil seach for neve divers in ds diver database on your had dive and in ary of the following selected locations Click Nest to start the search I Eloppp dek dives F OROM dive r K son qa sUpcoe F Specily a joostion fo USB_DRY 8 If the driver is searched correctly a screen similar to the one shown below will be displayed Windows dives file seach for the device Panasonc AG MX70 Windows it now ready to install the best diver for ther device Click Back to select a diferent diver or cick Newt to continue Location of diver S ouse onvworome 9 When the screen indicating that the installation is complete is displayed click on the Finish button Add New Hardware Wizard Windows has finished instaling the software that your new hardware devios requires Before use E For Windows ME 6 Connect the PC to the AG MX70 correctly Turn on the power to the PC Check that Windows has started up Place the setup CD ROM in the PC s CD ROM drive Turn on the power to the AG MX70 After a short while the Add New Hardware Wizard dialog will be displayed Select Automatic search for a better driver then click on the Next button Windows has found the following new hardware AG MX70 Windows can automaticaly search for and instal software thal supports your hardware U your hardere came wath installation medis incert now and cick Nad What would you Re to
23. and return to the direct pattern settings Example of transition Pos X 128 Y 128 Z 196 Event ME Time Pattern INT 00e 10 00F 3015 Wht Direct Pattern Setup Transition Enter to EXIT Off Width R1 R2 R3 R4 R5 If the setting operation is exited part of the way through by pressing other buttons etc the settings performed so far will not be stored in the memory The settings of six key patterns and seven transitions patterns are stored in the memory The edges and effects of each of the patterns are also stored Example of key pattern Pos X 128 Y 128 nm Z 196 mn Event ME Time Pattern INT 00e 10 00F 3002 Wht Direct Pattern Setup Enter to EXIT Width Color K Level White 255 Yy Ha gt 12 Light On TransF 32 R1 R2 R3 R4 R5 Key patterns 3xxx 4xxx and 5xxx as well as key learn patterns 9000 to 9019 can be assigned to key patterns Transition patterns Oxxx 1xxx and 2xxx can be assigned to transitions The factory settings are the patterns displayed 53 Setup initial setting screen Audio Video Input settings These are used to set the audio and video inputs R1 R2 R3 R4 R5 When Setup is selected using the rotary 2 control and A l Audio Enter is pressed OK appears so press Enter to change Video
24. only Multi Strobe is set OFF 1401 to 1498 143 to 182 2Dcomp MoveKey 3301 to 3303 3311 to 3313 3501 to 3578 2Dcomp Key 3304 3314 3324 3501 to 3378 Dual PinP 3401 to 3478 2DcompMoveKey OFF when Z is changed 3601 to 3623 Bounce Key OFF when Z is changed e When the 3D optional board AG VE70 is installed Pattern number selected Processing after cancel operation 1341 to 1348 47 to 50 134 to 137 2DSlide2 only Multi Strobe is set OFF 1541 to 1550 32 to 35 130 to 133 141 to 142 2chComp 3304 3314 3324 3501 to 3378 Dual PinP 4601 to 5614 6031 to 6037 3D 2Dcomp Key OFF when Z is changed 45 DSK Fade settings These settings are opened when the DSK FADE button or DSK Preview is selected Both DSK and Fade settings can be performed Select the DSK Source DSK Key Crop DSK On Off DSK Effects or Fade item using the rotary 1 control When the title memory is 0 the Key Memory Source Memory Memory Mode and Slide settings are canceled X 128 Y 128 Z 196 Event ME Time Pattern INT 00e 10 00F 3015 Wht DSK Fade Still DSK Key i Page Mode Source EXT 1 1 Write DSK i K Level 255 Crop Yy Ma 12 Slide In Slide Out On Off Off Off DSK Effects Fade R1 R2 R3 R4 R5 DSK Source settings These are used to select the DSK Key and Fill signal
25. or Reset the regular operation screen will appear Alternatively when Enter is pressed the demonstration mode is suspended and operation is enabled To execute the demonstration mode again turn the power off and then back on again The audio faders can be used even in the demonstration mode The default setting is Preset Direct Pattern setting This is used to set the pattern which is to be called as the R1 R2 R3 R4 R5 direct pattern Direct When Setup is selected using the rotary 2 control and Pattern Enter is pressed OK appears so press Enter to change N Setup to the setting mode Use Shift Enter to cancel Default When Default is selected using the rotary 2 control and Enter is pressed OK appears so press Enter to change to the default setting Use Shift Enter to cancel Setting method in the setting mode ME is selected for Preview so it can be used to check 1 Press the direct pattern button 2 The lamp of the selected button flashes The Mix Chrm chroma key and Lum luminance key cannot be set 3 Use the number keys to input the pattern to be assigned The pattern is displayed in the pattern area The program output can be checked using the wipe lever 52 Setup initial setting screen The LCD display now shows the setting screens for each effect pattern Proceed to set the edges and effects and if the settings are acceptable enter them using Enter
26. z Redo This cancels the contents of the Undo The same operation can be performed by pressing Ctrl wy Cut This deletes the selected title from the transmission list and saves it to the clipboard The saved title can be added to the transmission list via the Paste menu Only the title cut last will be saved The same operation also can be performed by Ctrl X or by right clicking the title data display column and selecting Cut from the pop up menu Copy This copies the selected title to the clipboard The saved title can be added to the transmission list via the Paste menu Only the title cut last will be saved The same operation can be performed with Ctrl C or by right clicking the title data display column and selecting Copy from the pop up menu Paste This adds the title saved on the clipboard to the transmission list The same operation can be performed with Ctrl V or by right clicking the title data display column and selecting Paste from the pop up menu Menu descriptions Delete This deletes the selected title from the transmission list The same operation can be performed with the DEL key or by right clicking on the title data display column and selecting Delete from the pop up menu Select all This selects all titles in the transmission list The same operation can be performed by pressing Ctrl A
27. 7 to 3 and 8 to 4 If the setting operation is exited part of the way through the settings performed so far will not be stored in the memory They are entered using Enter and operation returns to the Audio Video Input settings Select A S 1 A S 2 A S 3 or A S 4 as the audio input using the rotary 4 control Select ANALOG or SDI using the rotary 5 control Video input combinations that cannot be set S 5 to S 8 YC Y Pb Pr SDI Audio input combinations that cannot be set Combination of SDIs with different source numbers Example SDI of S 1 for video and SDI of S 2 for audio Mic or AUX2 can be set for AUXin using the rotary 4 control The default setting is Mic 54 Setup initial setting screen Memory setting This is used to set the memories used for INTVideo and a in R3 h4 RS DSK When the setting is changed all the memories are Memory INT V Title cleared How much memory is to be used for INT V and m A how much for Title for DSK and TitleKey is set using the 0 30 36 0 30 36 rotary 2 and 3 controls If the allocation to one memory is changed the allocation to the other memory will change so that the total remains 30 When a change is to be made OK appears Execute the change using Enter and use Shift Enter to cancel The default setting is 15 each for INT V and Title with NTSC and 13 each for INT V and Title with PAL Gen Lock external synchronization setti
28. 75 Q BNC x 8 sources 1 to 8 1 0 Vp p 75 Q Mini DIN4 x 4 sources 1 2 3 4 Y 1 0 VP P 75 C 0 286 VP P 75 Q 525 0 3 VP P 75 Q 625 BNC x 1 Y Pb Pr Analog component signals Y 1 0 Vp p 75 Q Pb Pr 525 0 757 Vp p 75 Q Pb Pr 625 0 7 Vp p 75 Q Key BNC x 1 1 0 Vp p 75 Q Analog composite signals genlock possible BNC x 1 with loop through configuration 1 0 Vp p 75 Q Composite signal genlock selection enabled from G L EXT Key BNC x 1 1 0 Vp p 75 Q BNC x 1 with loop through configuration 75 Q composite signals Sync 0 286 Vp p 525 0 3 VP P 625 Burst 0 286 Vp p 525 0 3 Vp p 625 XLR x 4 sets 4 0 3 dBu switchable 10 ko balanced RCA x 2 sets 10 dBV 10 kQ unbalanced AUX2 switchable with MIC Program 1 XLR x 1 set 4 0 3 dBu switchable 47 Q balanced Program 2 RCA x 1 set 10 dBv 47 Q unbalanced M6 x 1 60 dBv 2 kQ unbalanced switchable with AUX2 M6 x 1 8 kQ unbalanced D sub 9 pin RS 422A 232C switchable RS 422A protocol GVG Sony switchable Panasonic AG A850 AJ A900 SONY BVE 2000 BVE 910 PVE 500 D sub 9 pin open collector X 8 ch Collector current Less than 50 mA Maximum voltage 35 V DC BNC x 1 Make contact Type B connector x 1 USB Ver 1 1 cable length max 3 m 98 Specifications SDI Option Video input connectors BNC x 4 inputs 1 2 3 4 SMPTE 259M C EBU Tech 3267 E Video output connectors BNC x 1 SMPTE 259M C EBU Tech 3267 E
29. Broadcast PARTS INFORMATION amp ORDERING 9 00 a m 5 00 p m EST 800 334 4881 24 Hr Fax 800 334 4880 Emergency after hour parts orders 800 334 4881 TECHNICAL SUPPORT Emergency 24 Hour Service 800 222 0741 Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 905 624 5010 Panasonic de Mexico S A de C V Av angel Urraza Num 1209 Col de Valle 03100 Mexico D F 52 1 951 2127 Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc San Gabriel Industrial Park 65th Infantry Ave Km 9 5 Carolina Puerto Rico 00630 787 750 4300 Printed in Japan VQT9856
30. button If the status of the Color Effects button is not to be changed press the Color Effects button of the bus to be set while holding down the Shift key Settings can be performed separately for the A bus and B bus Preview is set to A by pressing the Color Effects button for A Preview is set to B by pressing the Color Effects button for B The Y setup 0 to 255 can be set using the rotary 1 control The default setting is 128 The Y gain 0 to 255 can be set using the rotary 2 control OdB 0 The default setting is 128 The Pb and Pr color balance can be set using the joystick s X direction for adjusting Pb and rotary 3 control or using the joystick s Y direction for adjusting Pr and rotary 4 control and the chroma gain can be set using the rotary Z and rotary 5 controls At this time the XYZ display is switched to Pb Pr C Gain Using transition pattern numbers 200 to 211 215 to 220 and 222 effects are applied to the B or Preset bus using the settings established for this channel and the pattern is changed to MIX 56 lt Notes gt e In the case of pattern numbers 221 222 1068 and 1069 color effects can be applied to the B channel and transitions can be initiated When this is done the pattern is changed to MIX 56 With the A bus B bus With the preset bus program bus the effects are applied to preset and they are turned off by setting the reverse button to ON Color effects cannot be applied to the I
31. can be performed with the operation button M or with the Down arrow key Jump to 10th Next This moves the cursor down 10 from the present position The same operation can be performed with the operation button DM or with the Right arrow key Bottom This moves the cursor to the end of the transmission list The same operation can be performed with the operation button A or with the END key Jump to the Current DSK Title This moves the cursor to the title being played The same operation can be performed with the number key 0 Jump to the marked Title This moves the cursor to a title with a Mark setting Select Mark1 to Mark9 from the submenu The same operation can be performed with the number keys 1 to 9 Menu descriptions Operation menu effective only when the AG MX70 is connected AutoLoad This automatically transmits the data from the selected data to the end of the list and performs DSK playback For details refer to Automatic transmission and playback of Title data page 88 The same operation can be performed with the operation button or with Shift Space Load Title This transmits the selected data For details refer to Manual transmission and playback of Title data page 88 The same operation can be performed with the operation button amp or with the L key Play This performs DSK playback for the selected data When the data has not yet been transmitted DSK playback wil
32. can be used to input numerical values for the event numbers when the event recall button or event setting button is ON for the pattern numbers when the event recall button or event setting button is OFF and the pattern number setting button is ON and for the transition times when the pattern number setting button is OFF key This key is used to increment the event numbers when the event recall button or event setting button is ON the pattern numbers when the event recall button or event setting button is OFF and the pattern number setting button is ON and the transition times when the pattern number setting button is OFF O key This key is used to decrement the event numbers when the event recall button or event setting button is ON the pattern numbers when the event recall button or event setting button is OFF and the pattern number setting button is ON and the transition times when the pattern number setting button is OFF 0 number key This key is used to input zeros When it is pressed together with the shift key the animation in the title memory now selected starts playing Period key This key is used to enter the seconds when inputting the time Example 2 5 2 seconds 5 frames When it is pressed together with the shift key the internal video movie now selected starts playing Shift key When this key is pressed together with another key the resulting effect differs from the one prod
33. operation of the fader lever takes effect from where the internal level and lever position match or where the higher lower relationship between them has been reversed when the input has been switched 13 SOURCE 4 8 fader This fader is used to adjust the audio level of input 4 which was set on the initial setting page when it is operated together with the shift key it is used to adjust the audio level of input 8 The operation of the fader lever takes effect from where the internal level and lever position match or where the higher lower relationship between them has been reversed when the input has been switched lt Note gt The adjusted sounds of 1 to 8 are selected at the cross points and combined When FOLLOW is ON the transition is coupled with Video When FOLLOW is OFF the transition is not coupled with Video The sounds of both A and B are combined The output level can be adjusted using the MASTER fader The effects that have been set are executed using the Audio Effects ON button AUX 1 fader This fader is used to set the audio level of input AUX 1 MIC AUX 2 fader This fader is used to adjust the audio level of the input AUX2 selected on the initial setting page or of MIC sound selected by Setup MASTER fader This fader is used to adjust the output level It executes the effects which have been set by the Audio Effects ON button Parts and their functions Rear panel connection area EX
34. or REPEAT playback Both Title data and IntVideo data can be used When Title data is used it is possible to set the horizontal position and vertical position of the image 5 C e CRAWL Two or more images are lined up one after the other and played back scrolled horizontally on the screen It is possible to set the direction and the speed for scrolling Only Title data can be used with this method It is possible to set the vertical position of the image 5 PS Sis 75 e ROLL Two or more images are lined up one after the other and played back scrolled vertically on the screen It is possible to set the direction and the speed for scrolling Only Title data can be used with this method It is possible to set the horizontal position of the image A gt AH E DSK effects When an image is displayed on DSK ON or cleared from DSK OFF the monitor it is possible to apply dissolve or 2 or 3D transition effects 5 E Image size The appropriate size of images for the Monitor 1 screen differs depending on the video format setting of the AG MX70 and the MX Navi settings NTSC Monitor 1 screen 640 x 480 PAL Monitor 1 screen 768 x 576 It is possible to se
35. reversed CHRM chroma key button This is used to call the chroma key When it is called ONE WAY button the previous setting is stored in the memory At the AB bus setting stage this button sets the transition pattern to a pattern from one direction The button s lamp flashes with preset bus or program bus or with patterns that have no reverse patterns indicating that the effects cannot be executed DSK EFFECTS button When this button is set to the ON position the transition pattern and 3D DVE are used for DSK ME is set to Diss When the DSK effects are ON the chroma key and luminance key cannot be selected This button is set to OFF as the default setting and some patterns cannot be used for the DSK effects lt Note gt If DSK Effects has been set to ON for a pattern which is not supported by DSK using a wipe pattern number the button s lamp flashes to indicate that DSK effects cannot be applied O Direct key pattern buttons These buttons are used to call the key patterns directly With the setup initial settings key patterns can be set from the default settings to any patterns The settings accompanying borders are also stored in the memory for each button Direct transition pattern buttons These buttons are used to directly call the transition patterns directly With the setup initial settings transition patterns can be set from the default settings to any patterns The settings accompanying borders ar
36. selection can now be set as ME and the images of the transition destination can be previewed at the Preview connector 3 Execution Press the DSK Fade button and perform the DSK Fade settings Select the DSK source and perform the slice and slope settings Set the DSK transition time When the button is pressed again the transition is executed until the DSK ON status To set DSK to OFF press the DSK button to turn off its lamp Fade 1 Preparation Perform the fade destination color and audio fade settings using the DSK Fade settings 2 Execution Press the FADE button When its lamp flashes the fade out status is established For fade in press the FADE button to turn off its lamp Effect by effect setting screens The settings for the transition and key patterns are performed on these screens The items that can be set differ from one pattern to another The LCD display changes as soon as one of the patterns is selected The key slice slope key level crop edge effects and DVEPlus settings are stored in the memory for each effect group If the system was started using Reset the default settings are established Furthermore the 3D modify settings are stored for each pattern group Transition wipe pattern settings The transition wipe patterns numbers 1 to 2999 are opened directly or when selected using the number keys lt Note gt When transition numbers 200 to 222 1001 to 1004 1021 to 1023 1030 to 1034 and 1059 to
37. set Key and Fill to EXT The playback type of the title concerned is displayed in the top section Playback or pause for Movie Crawl and Roll is initiated by Shift 0 46 DSK Fade settings DSK Key settings These are used to set the DSK key signals for external h Ra Rg nt AS applications Memory keys are used in their original form DSK Slope K Level The Slice level can be set to any value from 0 to 255 using Key 0 255 the rotary 2 control The default setting is 0 l 0 gt 55 0 215 0 255 Slope can be set to any value from 0 to 15 using the rotary 3 control The default setting is 0 The K Level key level can be set to any value from 0 to 255 using the rotary 5 control The default setting is 255 Crop setting This is used to set crop for DSK Al Ra R3 R4 ii The top can be set to any value from 2 to 200 using the Crop rotary 2 control The default setting is 6 The bottom can be set to any value from 2 to 200 using the 0 500 0 gt 00 0 680 0 680 rotary 3 control The default setting is 2 The left can be set to any value from 0 to 680 using the rotary 4 control The right can be set to any value from 0 to 680 using the rotary 5 control The default setting in each of these cases is 12 If the top setting is changed the bottom setting will change and vice versa in such a way that the total setting will not exceed 200 Similarly if the left setting is changed
38. the main window To clear data with the Protect setting perform the clearing operation from the memory status window eThe button display of main window is abnormal In a Windows 98 environment with certain video cards the button display may become abnormal Even if this problem should occur operation of this software will not be influenced It may be possible to eliminate the problem using one of the following methods e Update the video card driver to the newest version e Click Advanced on the Settings page of My Computer Control Panel Display open the Performance page on the displayed Properties screen and set the hardware accelerator setting to Basic or None 9 Specifications GENERAL Power Source 120 V AC 50 60 Hz Power Consumption 52 W with no optional accessories installed 70 W with all optional accessories installed L indicates safety information Operating temperature Operating humidity Dimensions W x H x D Weight VIDEO Video format Quantization Internal processing S N ratio Band width K factor DG DP AUDIO Sampling frequency Quantization Frequency response Dynamic range THD Cross talk Headroom 41 F to 104 F 5 C to 40 C Less than 80 relative humidity 16 3 4 X 7 3 4 X 15 3 4 inch 424 x 197 x 400 mm 8 2 kg with no optional accesso
39. the operating environment page 93 Help menu Help This displays the Help contents The same operation can be performed with the operation button S Version This displays the version of this application Title data operations Flow until Title data playback The procedure for transmission of PC images as Title data and DSK playback is as follows 1 Register the image in the list of Title data for transmission to the AG MX70 transmission list 2 Perform data playback settings 3 Play back and automatically transmit data manually or Registering Title data in the transmission list The transmission list is a list of Title data to be transmitted to the AG MX70 Up to 99 Title data items can be registered in the transmission list Images can be registered as Title data in the transmission list using the following procedure 1 Select Open image from the File menu of the main window The Open file dialog will open 2 Select the image to be transmitted When playback as MOVIE ROLL or CRAWL is desired select the image to be displayed first from a series of images 3 Set the data playback format etc O Tye Crawi Left 7 Frame Count 2 Icon Frame fi Cancel Heip Set the data playback format Set the data frame number number of images Set the frame number for the image to be displayed in the Icon row lt Note gt When the selected imag
40. the right setting will change and vice versa in such a way that the total setting will not exceed 680 The left and right settings can be changed in 2 step increments DSK On Off setting This is used to set the DSK on off operations Slide R1 R2 R3 R4 R5 IN OUT takes effect when Title has been selected for DSK ME Trig Slide Out Speed Whether the i or out operation is to be initiated during an On of Off 2 64 ME transition is set using the rotary 2 control Off Whether the sliding in operation is to be initiated in the horizontal or vertical direction during DSK ON is set using the rotary 3 control Whether the sliding out operation is to be initiated in the horizontal or vertical direction during DSK OFF is set using the rotary 4 control gt Slide toward the right lt 4 Slide toward the left A Slide toward the top V Slide toward the bottom The default setting in each of these cases is Off The sliding speed is set using the rotary 5 control Any even number from 2 to 64 can be selected The default setting is 8 When sliding has been selected the DSKTime is changed to 0 During sliding the DSK buttons have no effect but become operational again upon completion of the sliding operation This setting can also be changed at the PC lt p gt AV lt A gt AV 47 DSK Fade settings Fade settings These are used to perform the fade settings ia R2 R3 R4 R5 The image
41. the ripple group number 6031 R2 Level amplitude setting Level oo R3 Time setting acu R4 Width setting 0 255 SAE 255 T 5 The position of the ripple center can be changed using Shift XY e With the spark group number 6032 R1 R2 R3 R4 R5 R2 Width setting 3D Time R3 Size setting Modify 255 R4 Time setting 0 255 1 3 0 255 zeke a Ta 0 255 e With the melt group numbers 6033 to 6034 R2 Level setting e With the twist group numbers 6009 to 6010 R2 Rotate rotation setting R1 R2 R3 R4 R5 R3 Turn setting 3D Rotate Turn Tilt R4 Tilt setting Modify 128 128 128 0 255 0 255 0 255 41 Effect by effect setting screens Key Learn setting This is used to set key learn It cannot be set for number R1 R2 R3 Ra R5 3001 to 3006 3301 to 3305 6001 to 6003 and 6006 to 6010 Empty doors The key XYZ key level and 3D modify settings are Saved stored in the memory for each key frame 3D Empty The key patterns are selected using the rotary 2 and 3 Modify 9000 EEEN controls Selection is made from 9000 to 9019 9 9 Saved is displayed for a pattern once set by the pattern 000 901 Setup number and Empty is displayed for a pattern which has Preview not yet been set CLR Select Setup Preview CLR or All CLR using the rotary All CLR 4 control and enter the selection using Enter The oper
42. to be faded is selected from Black White or To Audio Phone Blue using the rotary 2 control The default setting is Black On After Black On or Off is selected for Audio fading using the rotary 3 si aoe control The default setting is On After or Pre is selected for Phone fading using the rotary 4 control At After the sound is heard with the fading effect applied to the images at Pre it is heard with no fading effect applied to the images The default setting is After lt Note gt Only one of three settings namely DSK memory title key or star heart key can be selected The key selected last takes precedence and the previously selected key is canceled When the pattern is changed to MIX 56 the title key or heart star key is to be canceled During title DSK the heart star key cannot be used 48 Audio Effects settings Pos X 128 Y 128 Z 196 Event 00E ME Time Pattern INT 10 00F 3015 Wht Audio Effects 1 8 Aux1 Aux2 R1 Pan Balance Low M Level Freq 1 01KHz R2 Pitch Up R3 R4 R5 Audio Effects is opened using Audio Effects or the ON button Audio effects can be set for each input Select the input from 1 crosspoint 1 2 crosspoint 2 3 crosspoint 3 4 crosspoint 4 5 crosspoint 5 6 crosspoint 6 7 cros
43. up menu Property This opens the Properties setting screen for the title selected by the cursor The same operation can be performed by double clicking the column IN TYPE OUT NAME of the title data display or by right clicking the title data and selecting Property from the displayed menu Read flash memory This reads the data SETUP menu settings operation panel settings etc in the flash memory of the AG MX70 and saves it in files Select this menu item after turning on the power while holding down the 0 key and 5 key on the operation panel of the AG MX70 and setting the AG MX70 to the flash memory backup mode A dialog box now appears so input the file name and click the OK button to save the flash memory data 83 Write Flash memory This writes the data of the saved file into the flash memory of the AG MX70 Select this menu item after turning on the power while holding down the 0 key and 5 key on the operation panel of the AG MX70 and setting the AG MX70 to the flash memory backup mode A dialog box now appears so select the file and click the OK button to write the file data When this operation is performed all the data in the flash memory of the AG MX70 is replaced Exit This shuts down the program Edit menu Undo This undoes data additions deletions and other operations Up to 16 steps can be undone The same operation can be performed by pressing Ctrl
44. 1069 and 1981 to 1983 are selected the pattern is changed to MIX 56 Pos X 128 Y 128 jm m Z 196 Oooooococomem Event ME Time Pattern 0E 10 00F 0013 Wht Transition Modify Pattern Edge Effects Modify settings The item to be changed in the pattern is selected from Off RI R2 R3 R4 R5 Comp compression Slide Multi and Blinds using the Modify rotary 2 control The default setting is Off Off The levels applying when the settings are selected are set using the rotary 3 control With the Comp setting Single or Both With the Slide setting Single or Both With the Multi setting H3 V3 HV3 H6 V6 HV6 Pair H3 Pair V3 Pair HV3 Pair H6 Pair V6 Pair HV6 Pair With the Blinds setting None Only the basic patterns and their related patterns can be set 31 Effect by effect setting screens Pattern Edge setting This is used to set edges for the patterns The border color R1 R2 R3 R4 R5 set here is used as the border matte for trail It is updated Pattern Color by the color which is read out for the direct pattern Edge White Select Hard Soft Border or Soft Border using the rotary 2 control The default setting is Hard Hard 1 255 White When Soft or Soft Border has been selected No 2001 to Soft Yellow
45. 15 Blue INT Video Grade Pos 80 Back Color Pattern Grade Matte White H1 Color Bar Memory R1 R2 R3 R4 R5 The internal video settings are performed on this screen This menu is selected when the INTVideo button below the LCD display is pressed Itis not selected using INT at a crosspoint While these settings are performed the color setting mode is established for joystick XYZ and rotary Z control The color set appears at the top right Setting items Back Matte Color Bar and Memory are selected using the rotary 1 control 20 INTVideo internal video setting screen When Back Matte has been selected The joystick XY and rotary Z control displays are set to Wash and the wash color that is the companion color for gradation is set The joystick X Y and rotary Z display change to Pb Pr and Y and the color can be set Pb Pr can be set to any value from 0 to 255 and Y to any value from 16 to 255 but only when Custom1 or Custom2 has been selected using rotary 2 control Colors are selected using the rotary 2 control There are 10 choices White Yellow Cyan Green Magenta Red Blue The color level Y level for White is set using the rotary 3 Matte White control When Custom1 or Custom2 has been selected White Level 0 255 either Back Matte or Wash is set Yellow 0 255 En Pattern gradation pattern is set using the rotary 4 control Cyan
46. 55 Effect by effect setting screens Color cancel setting This is used to perform the settings for color cancel The offset from the Offset key can be set to any value from nn in _ 0 to 255 using the rotary 2 control The C Slice cancel slice can be set to any value from 0 to Cancel 255 using the rotary 3 control 0 255 0 255 3 The C Area cancel area can be set to any value from 0 to 3 using the rotary 4 control The Mono L monochrome level can be set to any value from 0 to 15 using the rotary 5 control Crop setting This is used to perform the crop settings for the keys R1 R2 R3 R4 R5 These settings can be performed separately with LumKey EE EE al Ee TEE The top part of the image can be set to any value from 2 to 230 NTSC or to 277 PAL using the rotary 2 control The 2 230 2 230 0 680 0 680 default setting is 6 NTSC NTSC The bottom part of the image can be set to any value from 2 2 277 2 277 to 230 NTSC or to 277 PAL using the rotary 3 control PAL PAL The default setting is 2 The left part of the image can be set to any value from 0 to 680 using the rotary 4 control The right part of the image can be set to any value from 0 to 680 using the rotary 5 control The default setting in each case is 12 If the top setting is changed the bottom setting will change and vice versa in such a way that the total setting will
47. AG YA70 board 7 Secure the two screws which were removed in step 4 8 Secure the six screws which were removed in step 3 9 Tighten up the five screws which were loosened in step 5 100 Blank panel Screws x 6 4 Remove the two screws anchoring the AG YA70 on the motherboard 5 Slightly loosen the five screws anchoring the motherboard 10 Refer to the figure on the left and plug the cable attached to the AG YA70 into the AG MX70 11 Secure the screws which were removed in steps 2 and Installation of the AG VE70 The AG VE70 is a 3D effect board that enables the 3D patterns etc of the AG MX70 to be used Follow the procedure below to install it lt Note gt Always consult your dealer or authorized service center regarding installation of the AG VE70 in the AG MX70 1 Turn off the power of the AG MX70 remove the ten screws from the bottom panel and detach the top part including the LCD Refrain from using any force to pull the top part away from the bottom part since Screws x 10 the two parts are still connected by cables 2 Remove the 20 screws and remove the shield plate 3 Refer to the figure on the left and insert the AG VE70 4 Remove the five screws provided on the five hexagonal posts in the center of the motherboard Refer to the figure on page 100 5 In the same way plug the cable attached to the A
48. Audio input connectors Embedded audio channels 1 2 3 4 5 6 7 8 switchable Audio output connectors Embedded audio channels 1 2 ACCESSORIES Power Cable j 22 0 cc0ecec scents ceva ciivivn nerve 1 Operating Instructions nnee 1 MX Navi installation CD nnn 1 Warranty Card 25 tareveronarser earns hen erniet en 1 99 Installation of the AG YA70 The AG YA70 is an interface board that enables the AG MX70 to be connected to a serial digital interface SDI Follow the procedure below to install it lt Note gt Always consult your dealer or authorized service center regarding installation of the AG YA70 in the AG MX70 1 Turn off the power of the AG MX70 remove the ten screws from the bottom panel and detach the top part including the LCD Refrain from using any force to pull the top part away from the bottom part since the two parts are still connected by cables Refer to the figure on page 101 2 Remove the 20 screws and remove the shield plate 3 Remove the six screws from the rear panel of the AG MX70 and remove the blank panel Screws for anchoring the AG YA70 board A LS T 7 A mmm i C ocho a on oo a i o00000 o co o Q o o 00 1 00 Screws for zanchoring the AG VE70 n board Screws for anchoring the motherboard 6 Refer to the figure on the right and insert the
49. Clearing all the events is possible by inputting a period twice at the recall stage and then pressing Shift Alternatively this can be achieved by starting the system by pressing Shift Enter when the power is turned on and restoring the factory settings Pattern settings Press the Pattern button input the pattern number using Pattern the number keys and execute using Enter If the pattern 301 5 does not exist operation will jump to the nearest pattern number Each time Pattern is pressed the function is set to ON or OFF The default setting is MIX 56 Pattern numbers are incremented and decremented using the and keys Patterns that do not exist are skipped and displayed in turn 58 Other settings Transition time setting Select the item to be set and press the ME DSK or ME Time FADE button 1 0 00 Input the numerical value using the number keys and press z F Enter The numerical value can be incremented and decremented using rotary TIME or the and keys Set the ME back key transition DSK or fade time Set the time of the item selected for ME DSK or Fade above the number keys m loco The time is indicated on the LCD display It can also be JOTO input or output using the number keys Transition time selection With x xx displays it is possible to input 2 5 to display CONTRAST 2 05 where is used as a delimiter BS The default s
50. G VE70 into the AG MX70 Route the wires while carefully ensuring that they do not make contact with the transition lever unit 6 Secure the five screws which were removed in step 4 7 Secure the screws which were removed in steps 2 and Specifications AG YA70 AG VE70 SDI interface board optional accessory 3D effect board optional accessory Power Source DC 5 V 3 3 V Power Source DC 5V 3 3 V Power Consumption 6 3 W Power Consumption 6 1 W LJ indicates safety information LJ indicates safety information Operating temperature 41 F to 104 F Operating temperature 41 F to 104 F 5 C to 40 C 5 C to 40 C Operating humidity Less than 80 Operating humidity Less than 80 Standard SMPTE 259M C standard complied with 101 Panasonic PANASONIC BROADCAST amp TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office One Panasonic Way 4E 7 Secaucus NJ 07094 201 348 7000 EASTERN ZONE One Panasonic Way 4E 7 Secaucus NJ 07094 201 348 7621 Southeast Region 1225 Northbrook Parkway Ste 1 160 Suwanee GA 30024 770 338 6835 Ceniral Region 1707 N Randall Road E1 C 1 Elgin IL 60123 847 468 5200 WESTERN ZONE 3330 Cahuenga Blvd W Los Angeles CA 90068 323 436 3500 Government Marketing Department 52 West Gude Drive Rockville MD 20850 301 738 3840
51. G bus The setting is performed as a Video Effects setting screen When the button is pressed the A PROG video effect setting page appears on the LCD screen B PRESET bus STROBE execution button This button forcibly applies the strobe effect to the B PRESET bus When the button is pressed the B PRESET video effect setting page appears on the LCD screen The still and strobe field frame setting is performed using the time effect settings of Video Effects lt Note gt Both still and strobe cannot be selected at the same time Whichever one was selected last takes precedence In the case of manual strobe the effect is applied by pressing the button together with Shift A PROG bus VIDEO EFFECTS execution button This applies the mosaic decay and other video effects set by Video Effects to the A PROG bus When the button is pressed the A PROG video effect setting page appears on the LCD screen When it is pressed together with the Shift button the A PROG video effect setting page can be displayed on the LCD screen without changing the ON OFF setting of the effects O B PRESET bus VIDEO EFFECTS execution button This applies the mosaic decay and other video effects set by Video Effects to the B PRESET bus When it is pressed together with the Shift button the A PROG video effect setting page can be displayed on the LCD screen without changing the ON OFF setting of the effects A PROG bus color effect ex
52. H2 There are the following nine choices Green Set H3 Off _ No gradation Magenta eae v1 H1 Horizontal gradation 1 Red V2 H2 Horizontal gradation 2 Blue H3 Horizontal gradation 3 Black V1 Vertical gradation 1 Custom1 V2 _ Vertical gradation 2 Custom2 V3 Vertical gradation 3 Diag1 Diagonal gradation 1 Diag2 Diagonal gradation 2 The Grade combined gradation level is set using the rotary 5 control Any value from 0 to 255 can be set The gradation position is set using Shift rotary 5 control When Custom1 2 has been selected Black Color Grade The rotary 3 control is used to select whether BackM back Matte Custom1 en matte or Wash is to be set using the joystick With Set BackM the joystick XY and rotary Z control at the top of the 0 255 screen appear as Matte and with Set Wash they appear as Wash enabling the respective colors to be adjusted The default color for Custom1 and Custom2 is black jn Wash 21 INTVideo internal video setting screen When Memory has been selected Described below are the write and preview procedures for Still still picture or Movie moving picture It is possible to set the number of frames number of pages that can be used to a maximum of 30 NTSC or 26 PAL However if pages are allocated to titles the number of pages will be reduced by the equivalent amount The page allocation can be ch
53. Key Displayed only with 3D option Displayed by DVEPlus only with Kejdsip pajjoi9s special patterns Key setting The Slice level can be set to any value from 0 to 255 using the rotary 3 control The default setting is 0 Slope can be set to any value from 0 to 15 using the rotary 4 control The default setting is 15 The K Level key level can be set to any value from 0 to 255 using the rotary 5 control This can be set separately from the other keys The default setting is 255 The crop setting can also be set separately from the other keys Effects can be added for the effect settings in the same way as for other patterns The settings are performed as with the DVE s chroma key 36 Effect by effect setting screens Title Key setting The title key is opened directly or when selected using the number keys It is not displayed when Page is 0 The number of frames number of pages that can be stored in the memory for PC Title can be set on the Setup screen Pos X 128 Y 128 Z 196 Event ME Time Pattern INT 00e 10 00F 9501 Wht Title Key Still Slice Slope K Level 0 v z gt Displayed only with 3D option Displayed by DVEPlus only with special patterns Kejdsip payjoi9s Key setting The playback type of the title is displayed in the top section The Slice level can be s
54. NT EXT inputs 23 Video Effects setting screen Pos X 128 Y 128 r Z 128 Event ME Time Pattern 00e 10 00F 3015 Blue am ch A Video Effects Mosaic Defocus Mono Time Screen Effects i Scrolled display R1 R2 R3 R4 R5 This menu is selected using the A or B bus Video Effects button If the status of the Video Effects button is not to be changed press the Video Effects button of the bus to be set while holding down the Shift key Settings can be performed separately for the A bus and B bus At this time the bus to be set is automatically output to Preview The following video effects can be selected and set using the rotary 1 control Mosaic Defocus Mono Time Effects Decay Paint Nega Mirror and 3D OFF Ripple Multi or Spark can be selected for 3D lt Note gt Video effects cannot be applied to the INT EXT inputs 24 Video Effects setting screen Mosaic setting Select On or Off for this effect using the rotary 2 control i R2 R3 R4 R5 The default setting is Off Select XY both horizontal and vertical X horizontal XY X 0 30 only or Y vertical only using the rotary 3 control Set the size using the rotary 4 control Any setting from O to y 30 can be set for Size and the setting can be changed in 2 xY step increments The defa
55. Saving the transmission list naan oneens 89 Opening the transmission list nnn aaneen 89 Deleting Title data from the transmission list 89 Other operations ssnsenszennsensennenenseessannen 90 Checking the memory status of the AG MX70 90 Changing the AG MX 70 memory settings 90 Transmission and playback of IntVideo data 91 Clearing IntVideo data annae ennen ennnennenn 91 Reading data nnn nnnnenreneeeennnenrnnnenrenseerennnenrnnnen 91 Recalling events nnn nannnnennnnennenenvenneerennenvennen 91 Setting the initial properties nnn ennen ennn ennen 92 Setting the operating environment nnn anar 93 List of short cut keys nnnsnan sa annnnannnnnnen 94 Before calling for service nnnnnnneneen 95 Specifications rsrsnszeesnrernenersnnnerrensenennensnaannen 97 AG YA70 amp AG VE70 Installation of the AG VE70O 100 Installation of the AG YA70 en 101 SPECHICATIONS anrosrzenrerrsnensennninnennanrennvernsand 101 Parts and their functions Front panel controls Panasonic POWER POWER switch This is used to switch the AC power on and off Select Power from the Setup initial setting screen Reset is selected to establish the default setting when the power is turned ON and Preset is selected to start operation using the same settings which were in effect upon conclusion of the previous
56. Soft Border has been selected No 701 to 707 24 Soft to 27 801 to 814 183 to 196 patterns cannot be selected Border The Width thickness can be set to any value from 1 to 255 Soft Border using the rotary 3 control The default setting is 16 Only 1 or 2 can be set for the thickness setting if any of the following patterns have been selected e No 701 to 707 24 to 27 801 to 814 183 to 196 Select the Color border color using the rotary 4 control White Yellow Cyan Green Magenta Red Blue Black Custom1 or Custom2 can be selected The default setting is White The K Level key level transparency level can be set to any value from 0 to 255 using the rotary 5 control This can be set separately from the other keys The default setting is 255 The crop setting can also be set separately from the other keys Effects can be added for the effect settings in the same way as for other patterns 39 Effect by effect setting screens 3Dmodify setting This takes effect only for the special 3D patterns numbers 6001 to 6438 and 6601 to 6716 when the 3D optional board AG VE70 has been installed The parameters of the pattern for the 3D keys can be changed using the rotary 2 3 4 and 5 controls They can be stored in the memory for each pattern e With the sphere group numbers 6001 6301 to 6438 Rotate Time ee R2 Rotate rotation setting gn 128 R4 Time setting 0 255
57. T IN external key input area External key input connector This connector can be used for key or DSK applications It can also be used for genlock signal using the settings on the initial setting page External input Y connector The cross point EXT or DSK Y signal is input to this connector The DSK source can be set on the DSK FADE setting page External input PB connector The cross point EXT or DSK PB signal is input to this connector External input PR connector The cross point EXT or DSK PR signal is input to this connector lt Notes gt e Non standard signals are not accepted e Since the input signals do not pass through the frame synchronizers they must be synchronized with this unit SDI SDI option area IN1 connector QIN2 connector IN3 connector IN4 connector OUT connector The connectors listed above are used when the optional board AG YA70 has been installed 14 O MIC input connector This connector can be set to MIC or AUX 2 on the initial setting page PHONE headphone output connector The headphones are connected to this connector USB interface connector This connector is used to connect to a personal computer and download files Q ADV REF advanced reference output connector This connector outputs the reference signal with advanced vertical phase for source input uses GIL genlock reference input connectors These are loop through automatically termin
58. This button is used to select source 3 selected by the initial settings for the B PRESET bus When it is pressed together with the shift key source 7 is selected A PROG SOURCE 4 8 selector button This button is used to select source 4 selected by the initial settings for the A PROG bus When it is pressed together with the shift key source 8 is selected 12 B PRESET SOURCE 4 8 selector button This button is used to select source 4 selected by the initial settings for the B PRESET bus When it is pressed together with the shift key source 8 is selected D A PROG INT EXT selector button This button is used to select the image INT selected on the internal video setting page for the A PROG bus When it is pressed together with the shift key the external input EXT is selected B PRESET INT EXT selector button This button is used to select the image INT selected on the internal video setting page for the B PRESET bus When it is pressed together with the shift key the external input EXT is selected Transition lever This lever enables transitions to be performed manually FADE fade execution button This button enables fade out into the color set on the DSK FADE setting page During execution its lamp lights during fade out it flashes AUTO TAKE button This button enables the ME transitions and keys to be transited automatically During execution its lamp lights When it is pressed again du
59. V O79 07 al 6 Z 235 F EVENT ME Jime Pattern INT 00 02 00 21 eo J Transition j CS S a S a awi ol ms DSK FADE INT VIDEO SET UP LCD CONTRAST control This control is used to adjust the contrast of the LCD display SET UP initial setting page display button This button displays the initial setting page INT VIDEO internal video setting page display button This button displays the internal video setting page EVENT AUDIO EFFECTS ON RECALL FOLLOW v y y v jm In Pattern Edge Hard 10 DSK FADE DSK fade setting page display button This button displays the DSK fade setting page AUDIO EFFECTS audio effect setting page display button This button displays the audio effect setting page O EVENT RECALL button This button is used to read out events EVENT SET button This button is used to store events in the memory AUDIO EFFECTS ON audio effect execution button At the button s ON setting the effects which were set on the audio effect setting page are executed AUDIO FOLLOW video button This button enables the audio to be matched with the video during video ME transition or fading Its function is supported at the ON position ON or OFF is preset for fading on the DSK fade setting page Parts and their functions PHONE headphone volume control This con
60. ally selected for time Editing items that can be selected by the rotary 1 control Insert A key frame is inserted in the space of the next key frame Insert is executed using Enter Replace The current key frame is replaced Replace is executed using Enter CLR KF The current key frame is cleared Clear is executed using Enter Copy The current key frame is copied Copy is executed using Enter Paste The key frame in the copy buffer is pasted by overwriting Paste is executed using Enter If the key frame has not been copied the execution menu cannot be selected Exit Key learn is stored in the memory after exiting the editing mode Exit is executed using Enter In the editing mode it is possible to set the parameters using the rotary 2 3 4 and 5 controls XYZ using the joystick XY and rotary Z control the aspect ratio using Aspect the key frames using Shift rotary 2 control and the key level using Shift rotary 5 control To set another key pattern first exit this screen proceed with key pattern input again and execute key learn With basic patterns 3001 to 3006 that can be With Sphere 6001 positioned and basic compressed patterns 3301 to 3304 R1 R2 R3 R4 R5 K Frame K Level 00 255 K Frame K Level 00 255 Rotate TransF 128 255 R2 Rotate rotation setting R4 Time setting R5 TransF transformation setting XY Position 3D parameters are the same as with 3DModif
61. an be selected The default setting is White White Yellow Cyan Green Magenta Red Blue Black The key level transparency level can be set to any value from O to 255 using the rotary 5 control This can be set separately from the other keys The default setting is 255 The crop setting can also be set separately from the other keys Effects can be added for the effect settings in the same way as for other patterns 38 Effect by effect setting screens Other key settings numbers 3301 and up The pattern keys are opened directly or when selected using the number keys The size is set using the rotary Z control With patterns whose positions can be changed the position can be set using the joystick Pos X 128 Y 128 1 jm m Z 196 1 jm Event ME Time Pattern INT 00e 10 00F 3301 Wht Luminance Key Ext Key Pattern Key K Level 255 Displayed only with special patterns during 3D option Aejdsip pajjo1os Valid only with special patterns Pattern edge setting This is used to set the pattern edge R1 R2 R3 R4 R5 Select Hard Soft Border or Soft Border using the Pattern Color K Level rotary 2 control The default setting is Hard Edge White 255 When Soft or Soft Border has been selected No 2001 to 2195 and 6008 to 6010 patterns cannot be selected Hard 12259 95293 When
62. anged on the Setup initial setting screen e Write procedure When Frame 1 R1 R2 R3 R4 R5 Use the rotary 5 control to set the mode to Write Use the rotary 2 control to select the page on which the amen Pe N a Weta images are to be written i Write Use the rotary 3 control to set the number of frames to be 1 30 26 1 30 26 Field Write written Set 1 as the number of frames for Still writing and ea ka Frame Preview set a number greater than 1 for Movie writing Exit Check the image to be written at the Prog output and when the image to be written appears write it using When Frame gt 1 Enter In the case of Movie the images are written consecutively from the page designated by the rotary 2 Ri R2 R3 Ra HS control up to the page equivalent to the number of frames Memory Page Mode designated by the rotary 3 control Any existing data will 1 Repeat Write be deleted in the process of image writing 30 26 1 30 26 Repeat Write NTSC PAL NTSC PAL Once Preview Preview procedure Exit Use the rotary 5 control to set the mode to Preview Use the rotary 2 control to select the page on which the images are to be previewed To preview Still use the rotary 4 control to select Field output or Frame output To preview Movie use the rotary 3 control to set the number of frames to be previewed and the rotary 4 control to select Repeat repeat playback or Onc
63. ansmission list can be deleted from the list using the following procedure 1 Move the cursor to the data to be deleted and left click on the data The yellow frame cursor moves to the selected data 2 Select Edit Delete from the menu of the main window The data is deleted from the transmission list Other operations Checking the memory status of the AG MX70 The status of the image memory of the AG MX70 can be checked on the memory status screen Select Tools Memory status from the menu of the main window to open the memory status screen J Memory Status Fie Operation g or a pad p a NTSC 43 Title Area m P z 7 Infvideo Area Done wn Empty Title Used 1 2 3 Ei 5 6 7 8 9 Title Protected Title Unknown intVideo Used Selected Data 1 Order a gt ei Name image3jpg Type ROLL UP Frame 2 Divide 1 OD The system setting status of the AG MX70 is displayed here This is the memory status display column One line corresponds to one page e The column with the line numbers displayed in yellow is the Title data area and the blue column shows the range of the IntVideo data e With Title data the color differs according to the data type Orange Normal data Pink Data with Protect setting Green Data that cannot be recognized by MX Navi data written on the AG MX70 side data transmitted the previous time when MX Navi had be
64. ated connectors They supply signals to the source VTR or camera and initiate genlock They enable genlock for the G L input or EXTKEY input by making a selection on the initial setting page PREVIEW output connector The signals selected by the preview selector button are output from this connector GPI input connector A trigger is applied and a transition is enabled for ME DSK or fade as selected on the initial setting page The effect is applied 3 frames later AUX IN spare 1 L and R input connectors AND AUX IN spare 2 L and R input connectors These connectors can be used by making a selection on the initial setting page AUDIO OUT 2 L and R output connectors These are unbalanced audio output connectors Parts and their functions R R YC Composite 5 component Ps input 1 connector Component Pr input 1 connector YC input 1 connector Composite component Y input 2 connector Composite 6 component Ps input 2 connector Component Pr input 2 connector YC input 2 connector bees cose Composite component Y input 1 connector Composite component Y input 3 connector O Composite 7 component Ps input 3 connector Component Pr input 3 connector YC input 3 connector Composite component Y input 4 connector Composite 8 component Ps input 4 connector Component Pr input 4 connector YC input 4 connector Composite output 1 connector Component Y output 1 connector
65. ation of a set key is reproduced by selecting a pattern with the Saved display and then selecting Preview followed by Enter When a pattern with the Saved display is selected and either CLR or All CLR is selected followed by Enter OK appears By selecting Enter at this point the selected key learn pattern is cleared if CLR was selected or all the key learn patterns are cleared if All CLR was selected Clearing is canceled using Shift Enter With either Empty or Saved patterns the editing mode is established by selecting Setup followed by Enter and the display is switched When a Saved pattern is to be set OK appears use Enter to set the pattern or Shift Enter to cancel the setting 42 Effect by effect setting screens Pos X 128 Y 128 mm Z 196 mn Event ME Time Pattern INT 00e 10 00F 3013 Wht Key Learn 9000 Insert Replace Basic K Frame K Level 00 255 R1 R2 R3 R4 R5 In the key learn editing mode the key frame number is displayed in K Frame Using the rotary 1 control the editing items are selected and key frames are set Key frames 00 to 19 can be set and they are displayed during editing in the rotary 2 control display area The time settings for the key frames to date can be set by ME Time This is useful for an additional KeyFrame During learning ME is automatic
66. bility with Windows XP Lel me why this testing is moortant Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing Continue Anyway 7 When the screen indicating that the installation is complete is displayed click on the Finish button Found New Hardware Wizard Completing the Found New Hardware Wizard The weed hes freched installing the softwere bor a Panasore AG MOTO Click Firash to clone the wead Fen Before use Installation of MX Navi After installing the USB driver install MX Navi the software for handling image exchange with the AG MX70 Follow the steps below 1 2 3 Select Run from the Start menu Click the Browse button select Setup exe in the MX Navi folder of the setup CD ROM and click OK Type the name of a program folder document or Internet resource and Windows will open it for you Oper fe MXnavi Setup exe aean tome The setup start screen will be displayed Click the Next button Welsome te the InstaltSiveld wizard for MX Novi for AB MX70 The katalat waard vel raal Mae bor AG MOTO onyour computes To cortinan cick Nest Lt en e The screen for setting the MX Navi in
67. ck and the last click will be selected When several titles are selected the data selected first will be the object for Properties settings and screen display For other operations all selected titles will be the object lt Note gt For the setting contents for DSK ON and DSK OFF refer to Setting the title data playback properties page 86 Menu descriptions File menu Creation of a new list This clears the current transmission list and creates a new one refer to page 86 The same operation can be performed with the operation button Li Open image This opens an image and adds the title data at the end of the transmission list The same operation can be performed with the operation button Open List This clears the current transmission list and opens a previously saved transmission list The same operation can be performed with the operation button Save List This overwrites and saves the current transmission list If the current transmission list does not have a name the operation becomes the same as with Save List as The same operation can be performed with the operation button be Save List as This saves the current transmission list with a new name Preview This opens the image display screen and displays the image of the title selected by the cursor The same operation can be performed by double clicking the ICON column of the data display and selecting Preview from the pop
68. communications when the AG eos Windows 98 MX70 is connected to a PC via the USB port Windows ME Windows 2000 Professional B MX Navi Windows XP HomeEdition This software is for use when transmitting images from a PC Windows XP Professional to the AG MX70 and playing them back and when reading e CPU Pentium 1300 MHz or better still images from the AG MX70 into a PC Installing this e RAM 64 MB or more software makes the following possible Bisel True Color 24 bits 32 bit Transmitting of images from a PC to the AG MX70 ope ns ei ae 5 x e PC images can be transmitted to the AG MX70 as Title Harddisk 5 MB or more free space data or IntVideo data e Other CD ROM drive e Playback and pause operations can be performed with the transmitted data Reading of still images from the AG MX70 into a PC e Images displayed on the AG MX70 can be read into a PC as still images Management of the AG MX70 memory e It is possible to check the status and change the settings of the AG MX70 s image memory Refer to Before use on pages 77 to 79 when installing this software Overview of MX Navi MX Navi is software used when transmitting images from a PC to the AG MX70 and displaying them and when reading still images from the AG MX70 into a PC The following are possible when a PC has been connected to the AG MX70 e DSK display of the PC screen as telop or animation e Display of the PC screen with internal matte e Images prov
69. d from NTSC to PAL or vice versa the current transmission list will be closed and a new list will be opened Other operations Transmission and playback of IntVideo data The operations for transmission and playback of PC images as IntVideo data is described below 1 Select Tools Memory status from the menu of the main window and open the memory status screen Select File Load Intvideo from the menu of the memory status screen The Open file dialog will be opened For transmission of a STILL image to the AG MX70 select the image and click OK To play back MOVIE images select the image to be played back first from a series of images and click OK to display the playback format setting screen When the playback format and the number of frames to be transmitted have been set and OK is clicked the images will be transmitted to the AG MX70 Left click the data to be played back in the status display column on the memory management screen The data is set to the selected status status in which the color darkens Select Operation Preview from the memory status screen menu The data is now played back lt Notes gt e Crawl and Roll playback formats cannot be used for IntVideo data e Images cannot be transmitted immediately after the AG MX70 s power has been turned on or immediately after changes have been made to the image memory settings e While tra
70. d to perform a variety of settings ik ne R3 Pa RS The rotary 2 control is used to set the amount of delay for System1 Dly Time RS422 the source input when the AdvRef advanced reference 1Frame Sec GVG ignal i t ith the 3D optional AG VE7 signa is connected wi e 3D op iona board AG 0 TFrame See ME GVG installed If OFrame is selected the video delay amount is OFrame Frame DSK SONY different between when the 3D effects are applied and when Fade they are not The default setting is 1Frame The setting is fixed at OFrame when the 3D optional board is not installed The audio source delay amount is also set according to this setting Sec seconds frames or Frame frames only is selected for the time display using the rotary 3 control The default setting is Sec Whether ME DSK or Fade is to be executed by GPI can be set using the rotary 4 control The default setting is ME GVG or SONY can be selected as the RS 422A protocol using the rotary 5 control The default setting is GVG System2 setting The time taken until the LCD is set to the power saving R1 R2 R3 R4 R5 mode can be selected using the rotary 2 control System2 LCDStby VBClean With the O setting the display is always on The time can 0 Off 0 60 On On be set in 10 minute increments from O to 60 The default setting is 0 On or Off is selected using the rotary 3 control to set whether or not cleaning is to be performed i
71. displayed frame can be changed either by direct input of numbers or by clicking the arrows 89 Reordering the transmission list The transmission list can be reordered by any one of the following methods e Select the reordering method as Sort by name or Sort by comments from the Display menu e Double click the 4 buttons in the heading column of NAME COMMENT of the transmission list When the display mode is Icon mode reordering by name will be done with the left button and reordering by comment with the right button When the display mode is List mode it is only possible to reorder by name e Data can be dragged to a different position by left clicking on the data and releasing the button after dragging the cursor to a new position The data will be moved to the position where the button was released Saving the transmission list The created transmission list can be saved to a file 1 Select Save list as from the File menu of the main window The Save List as dialog will be displayed 2 Enter the list name and click on the OK button Opening a transmission list A saved transmission list can be opened as follows 1 Select Open list from the File menu of the main window The Open file dialog will be displayed 2 Select the list to be opened and click on the OK button Deleting Title data from the transmission list Data registered in the tr
72. do G fiona seach or a belier diver Reconmended C Speeily the location ol the diver Advanced ee ne en When the screen indicating that the installation is complete is displayed click on the Finish button Add New Hardware Wizard 8 a Panasonic AG MX70 that your new hardware device requires 78 E For Windows XP lt Note gt Be sure to log on as a user with Administrator rights when installing this software 1 Connect the PC to the AG MX70 correctly 2 Turn on the power to the PC Check that Windows has started up 3 Place the setup CD ROM in the PC s CD ROM drive 4 Turn on the power to the AG MX70 After a short while the Found new hardware wizard dialog will be displayed 5 Select Install the software automatically then click on the Next button Found New Hardware Wizard Welcome to the Found New Hardware Wizard This razand helps yor ratal software for AG MTD I yout haedware came with an installation CD 01 Boppy disk insert it now What do pou mant the szad to do Instal the zoemer automancaly Pecommeanded Instal frome a bet oe specie locaton Advanced Click Newt 10 continue 6 If the installation warning screen is displayed click on the Continue Anyway button Hardware Installation The software you aie installing for this hardware Panasonic AG MX70 has not passed Windows Logo tasting to verily its compati
73. e once only playback If a value exceeding the number of frames written has been set by the rotary 3 control the setting will be ignored Start the preview using Enter Even when the page selected by the rotary 2 control is midway through the Movie the Movie is played back from its beginning If the settings are acceptable use the rotary 5 control to set the mode to Exit then enter the settings using Enter The page set is recalled by the INTVideo button and played back Even when another Matte or CustomColor selection has been set using INTVideo upon completion of the settings the images previously stored in the memory can be read by selecting Memory again but they will be cleared after the power is turned off The playback trigger is applied using Shift The Grade setting which was set by BackMatte also takes effect for Memory lt Note gt Images cannot be written during Movie playback If images are to be written first set Mode to Exit and press the Enter button to exit Movie playback and then proceed 22 Color Effects setting screen Color Pb 128 Pr 128 23 C09 COO C09 CF Cd C29 CCI Cea en Ge on Effect CGain 128 EI C23 C73 23 29 03 C09 03 O03 Oo DE DE Event ME Time Pattern O0E 10 00r 3015 Blue Color Effects R1 R2 R3 R4 R5 This menu is selected using the A or B bus Color Effects
74. e This is used for setting the name of the data Up On This is used for setting the operation when the to 128 single byte characters can be entered data is displayed on the screen DSK ON Comment This is used for setting a comment for the data e AutoTrigger This sets the start operation Up to 128 single byte characters can be entered No check DSK ON will be performed when the playback lt Notes gt puton oma bedenk prassad Gr Whon e The initial value for the playback setting can be changed the DSK button on the main unit is pressed Check DSK ON will be executed when the specified at the Initial set of Property data screen Refer to page time has expired after the data playback 92 operation e When the pattern entered for DSK ON and DSK OFF is a e Effect This sets the special effects pattern that can not be used with DSK automatic a f correction will be made to a similar pattern i es a a pe usedidt DSK ON When there are 3000 or more patterns the same pattern Time Set the time for execution of special effects must be used for DSK ON and DSK OFF from 00 00 to 00 30 For 0 to 2999 patterns the combination of DSK ON and e Slide This is used for the slide display settings PAR OFE CRT RSe eN Sen i f e Set Time as 00 00 when no special effects are to be used Dir Click the arrow to select the slide direction with DSK ON and DSK OFF Speed Enter the slide speed number of pixels to be f e The position Y value cannot be set wh
75. e also stored in the memory for each button Parts and their functions Preview output selection area The controls in this area are used to determine which images among the transition preview DSK preview and A B bus images are to be output from the PREVIEW output connector on the rear panel ME PRV selector button This button is used to select ME preview as the image to be output to the preview connector With transitions the image of the transition destination can be previewed with keys combined images can be previewed A PROG bus selector button This button is used to select the A PROG bus as the image to be output to the preview connector B PRESET bus selector button This button is used to select the B PRESET bus as the image to be output to the preview connector DSK selector button This button is used to select the DSK combined image as the image to be output to the preview connector Effect execution button area A PROG bus STILL execution button This button forcibly applies the still effect to the A PROG bus When it is pressed the A PROG video effect setting page appears on the LCD screen B PRESET bus STILL execution button This button forcibly applies the still effect to the B PRESET bus When it is pressed the B PRESET video effect setting page appears on the LCD screen A PROG bus STROBE execution button This button forcibly applies the strobe effect to the A PRO
76. e as for DSK ON Time fozo0 OO e Slide Same as for DSK ON ee er PF prod Duration This is used for setting the data playback time The playback time also includes the time for Mark DSK ON and DSK OFF This is effective only ar 2 a Nomark when AutoTrigger of DSK OUT is checked Position This is used for setting the data display position Name _ FILE0000tga as the offset pixels from the left top of the Comment screen a X and Y can be set for STILL and MOVIE Y can ll rene Help be set for CRAWL and X can be set for Roll e X A value from 0 to 719 can be set for NTSC Description of the setting items depending on the data as well as PAL playback format some items may not be displayed or A A value of 0 to 480 can be set for NTSC setting may not be possible and a value of 0 to 576 can be set for PAL only even numbers Icon This is used for setting the frame number of the Protect When this is checked the data will not be image to be used for display in the ICON row of cleared from the memory by normal clearing the main window operation Mode This is used for selecting ONCE or REPEAT Mark Any number from 1 to 9 can be set When the when MOVIE display is being used number to be set is selected via Cursor During ROLL and CRAWL it is used for Jump to Mark itis possible to jump straight to selecting the scroll direction and entering the the desired data speed number of pixels to be moved per field Nam
77. e is not a series format it will be registered automatically as STILL data so this screen will not be displayed 4 The data is added to the transmission list and displayed in the main window 86 Setting the Title data playback properties Setting of special effects with DSK ON DSK OFF the data display position etc will be done automatically according to the initial value settings at the time the data was registered in the transmission list These settings can be changed on the Properties screen of the data The properties screen of the data is opened using the following procedure 1 Move the mouse cursor to the data for which the settings are to be changed and left click on the data The yellow band cursor will move and the data will be selected Select Property from the File menu of the main window The Properties window will open Title data operations xj Off This is used for setting the operation to be oa oe oa performed when the data is deleted from the H screen DSK OFF Dan s a e AutoTrigger This sets the start operation fame J a No check DSK OFF will be performed when the playback On on button on the main window is pressed or when F AutoTrigger ooo AutoTrigger Duration 001000 the DSK button on the main unit is pressed Effect Effect Check DSK OFF will be performed according to the C Pattern C Pattern Fb and time set for Duration Diss Diss Position X 0 zi Po g e Effect Sam
78. ecution button This applies the white balance brightness adjustment and other color effects set by Color Effects to the A PROG bus When it is pressed together with the Shift key the A PROG color effect setting page can be displayed on the LCD screen without changing the ON OFF setting of the effects B PRESET bus COLOR EFFECTS execution button This applies the white balance brightness adjustment and other color effects set by Color Effects to the B PRESET bus When it is pressed together with the Shift key the B PRESET color effect setting page can be displayed on the LCD screen without changing the ON OFF setting of the effects lt Note gt Both the color effects and mono effects cannot be selected at the same time If both are selected the mono effects always take precedence Parts and their functions Setting panel area Q s X 119 X 107 ogogo A a ases Z 235 oo0000r00 000000000 EVENT ME Jime 00 02 00 21 Pattern INT Transition J Yv v Edge Hard y v at Whty 0 AE A A aT me Effects Off INT SET UP VIDEO O LCD liquid crystal display The effect parameters time settings and information are shown on this display other Joystick Z parameter display area During positioning the X Y Z parameters are displayed here during the color settings the Pb Pr Y parameters are displayed A
79. een while the VHS is set to a special playback such as fast forwarding or rewinding mode 26 Video Effects setting screen Decay setting The A and B multi strobe transition Key DSK shadow and R1 R2 R3 R4 R5 trail cannot be selected at the same time Only one of these Decay Time Select On or Off for the effect using the rotary 2 control On 0 32 Any time setting from O to 32 can be selected using the rotary 3 control The default setting is 16 Off This level setting is used for the level of transition number 1066 219 Paint setting Select On or Off for the effect using the rotary 2 control R1 R3 R4 R5 Any level setting from O to 7 can be selected using the Level rotary 3 control The default setting is 4 4 R2 This level setting is used for the level of transition number 1034 211 a Ee Nega negative setting The Y negative setting and chroma key negative setting can R1 R2 R3 R4 R5 be selected separately using the rotary 2 control and rotary Y Cc 3 control respectively In both cases the default setting is eol ot Off On On Off Off Mirror setting The H horizontal direction mirror setting and V vertical R1 R3 R4 R5 direction mirror setting can be selected separately using the Vv rotary 2 control and rotary 3 control respectively In both Off On R2 cases the default setting is Off 5 n Off Off lt Note gt
80. en DIVIDE is 1 moved per field 87 Title data operations Manual transmission and playback of Title data Data registered in the transmission list can be transmitted to the AG MX70 using the following procedure 1 Move the cursor to the data to be transmitted and left click on the data The yellow frame cursor moves to the selected data 2 Select Operation Load title from the menu of the main window The data is transmitted to the AG MX70 lt Notes gt e The time required for the transmission differs according to the image size and the number of images e Transmission is not possible when the image memory of the AG MX70 does not have the required free space Clear any data that is not required from the image memory refer to Clearing Title data and repeat the transmission operation e Images cannot be transmitted while the Loading display appears on the LCD screen immediately after the AG MX70 s power has been turned on or immediately after changes have been made to the image memory settings e While transmission is in progress the LCD display of the AG MX70 shuts down DSK playback of the transmitted data is possible using the following procedure 1 Move the cursor to the data for DSK playback and left click on the data The yellow frame cursor moves to the selected data 2 Select Operation Play from the menu of the main window DSK playback is performed for
81. en started etc e The data can be selected by left clicking on the data in the status display column The selected data becomes the object for clearing and for reading to the PC lt Notes gt e On this screen select the data to be cleared and then select Operation Clear specified area from the menu Title data with Protect setting also will be cleared by this operation e All Title IntVideo data can be cleared by selecting Operation All Clear from the menu of this screen 90 Changing the AG MX 70 memory settings The settings of the AG MX70 switching between NTSC and PAL switching between 4 3 and 16 9 changing the page distribution between Title data and IntVideo data can be changed from the PC From the menu of the main window select Tools AG MX70 setup to open the mixer setting screen 2 Change the memory settings in the Memory column on the mixer setting screen Signal This setting can be switched between NTSC and PAL Aspect This setting can be switched between 4 3 and 16 9 Allocation The page distribution between Title data and IntVideo data can be changed here 3 The settings are reflected by clicking the Set button lt Notes gt e When the memory setting has been switched to 4 3 or when the page distribution for Title data and IntVideo data has been changed all data will be cleared from the image memory e When the memory setting has been switche
82. ent are combined through digital processing or where many different kinds of effects are added It incorporates two frame synchronizers a feature which makes it unnecessary for two video signals to be synchronized Its dedicated software program the MX Navi enables titles to be downloaded from a PC to facilitate the insertion of titles In addition to the wipe mix and digital effects this unit comes with built in chroma key and luminance key functions Since its downstream keys fade controls and audio mixers can also be used the effects required for AB roll editing can be added by just this one unit Connectors for connecting an external controller are also provided e AB roll editing AB roll editing is made possible by the unit s two built in frame synchronizers e Connection of external editing controller The unit is equipped with GPI and RS 422A RS 232C connectors to enable an external editing controller to be connected e Digital effect functions By using the unit s internal digital memory it is possible to mobilize the still strobe negative mono multi strobe division into 4 9 or 16 mirror mosaic and paint functions Field frame switching is possible for the still strobe and multi functions Ripple multi spark and other effects can also be provided by adding the 3D optional board AG VE70 e Audio mixing The unit comes with four sets of input facilities e Mixed effects The unit provides a range of mixed effect function
83. et to any value from 0 to 255 using the rotary 3 control The default setting is 0 Slope can be set to any value from 0 to 15 using the rotary 4 control The default setting is 15 The key level can be set to any value from O to 255 using the rotary 5 control This can be set separately from the other keys The default setting is 255 The crop setting can also be set separately from the other keys Effects can be added for the effect settings in the same way as for other patterns The settings are performed as with the DVE s chroma key 37 Effect by effect setting screens Basic Pattern Key setting numbers 3001 to 3046 The basic pattern key is opened directly or when selected using the number keys Pos X 128 Y 128 Z 196 Event 00E ME Time Pattern INT 10 00F 3002 Wht Basic Pattern Key Pattern Edge Hard Effects Off Displayed only DVE Off with 3D option Rotate TransF 32 Displayed by DVEPlus only with wn O bad Q a 2 2 o iy lt Empty 9000 R2 R3 R4 special patterns R5 Select Hard Soft Border or Soft Border using the rotary 2 control The default setting is Hard The thickness can be set to any value from 0 to 255 using the rotary 3 control The default setting is 16 Select the border color using the rotary 4 control Custom1 or Custom2 c
84. etting is 60F BHO Correlation between number key settings and Pattern button Pattern takes precedence over ME DSK and Fade Items selected by ME DSK or Fade can be set by the rotary controls The number keys can also be used when Pattern is OFF The items selected appear on the LCD display There are three options ME DSK and Fade and they can be set to OFF by pressing the ON button In this case neither the rotary controls nor the number keys can be used Number key priorities The number key priorities are event memories pattern settings transition time settings LCD screen settings In the event memories the number keys cannot be used for pattern settings transition time settings or LCD screen settings 59 Transition patterns Multi PairH3 Overlap Multi PairV3 Overlap 60 Transition patterns Blinds Multi H3 Multi V3 Multi H6
85. g Contact your dealer if the problem persists even when you have checked the following items AG MX70 related problems Problem What to check e The power can not be switched on e Is the plug of the power cable inserted properly in the outlet e Has the fan stopped operating e There is no picture Is the power of the VTR or other connected equipment switched on Are the cables connected correctly e Has fade been applied Has the source been input correctly e There is no color els the monochrome selection switch set to ON Is only Y provided as input instead of the composite signal e Has the source been input correctly e There is no sound Has audio fade out been applied e Has the source been input correctly eThe image does not change even when the transition lever is moved during mix wipe mode e Has the same signal been selected for A side and B side MX Navi related problems Problem What to check A menu for title load or playback etc is grayed out and operation is not possible The AG MX70 has not been recognized by the PC Check the following items e Is the power of the AG MX70 switched on e Are the AG MX70 and the PC connected correctly via a USB cable e Is the length of the USB cable less than 3 m When operation is still not possible even though the above items are fulfilled it is possible that the USB driver has not been insta
86. ge format and the file name and click OK When the data to be read in is composed of multiple images a number will be automatically appended at the end of the file name lt Notes gt e For saving in of Title data the image format is fixed to TARGA 32 bit pixel with channel e For saving in of IntVideo data the image format can be selected as TARGA JPEG or BMP all 24 bits pixel no a channel e Capture the IntVideo data after the IntVideo playback has been stopped at the AG MX70 main unit e Images cannot be transmitted while the Loading display appears on the LCD screen immediately after the AG MX70 s power has been turned on or immediately after changes have been made to the image memory settings e While transmission is in progress the LCD display of the AG MX70 shuts down Recalling events AG MX70 events can be recalled from the PC 1 Select AG MX70 setup from the Tools menu of the main window 2 Input the number of the event to be recalled into the Event Recall column on the mixer setting window and click the Recall button The event is now recalled Other operations Setting the initial properties The initial values for the properties to be used with new data can be set on the Initial set of Property Data setting screen 1 Select Initial set of Property Data from the Tools menu of the main window The Initial set of Property Data setting sc
87. ided as input to the AG MX70 can be read into the PC as still images and be converted to image files 74 Processing of image data E By data type Image data is processed by the AG MX70 either as Title data or IntVideo data depending on the application When image data is transmitted to the AG MX70 it is necessary to first select one of these 2 data types e Title data Data to be used for DSK playback should be transmitted as Title data RGB data and a channel data are used by Title data When an image having an a channel is used the image is subjected to transparency processing corresponding to the value of the a channel When an image not having an a channel is used transparency processing is not performed e IntVideo data When the image is to be played back as internal matte it is transmitted as IntVideo data The image uses only RGB data As the a channel is not used transparency processing is not performed E Display methods It is possible to select from the following display methods according to how the image data is to be played back e STILL With this method a single image is played back as a still image Both Title data and IntVideo data can be used When Title data is used it is possible to set the horizontal position and vertical position of the image gt L e MOVIE With this method two or more images are played back consecutively A single image is processed as one frame It is possible to select from ONCE
88. ing the following procedure 1 Move the cursor to the data to be cleared and left click on the data The yellow frame cursor moves to the selected data 2 Select Operation Clear the selected title from the menu of the main window The data is cleared lt Notes gt e When Operation Clear all title is selected from the menu of the main window all transmitted Title data will be cleared e Data for which Protect has been set will not be cleared by this operation Clearing of data for which Protect has been set must be done from the memory status screen Refer to page 90 88 Title data operations Checking the Title data image The image of the data selected on the image display screen can be displayed in the original size so it can be checked The image display screen can be displayed using one of the following methods e Select Preview from the file menu of the main window e Select Preview from the menu displayed when the mouse is right clicked on the data e Double click the ICON part in the data display column When the selected data has been changed on the main window the image changes to reflect the changes Order This is the order of the data to which the displayed image belongs The order displayed data can be changed either by direct input of numbers or by clicking the arrows Frame This shows the data frame to which the displayed image corresponds The
89. l be performed after transmission For details refer to Manual transmission and playback of Title data page 88 The same operation can be performed with the operation button Be or with Space Stop This stops DSK playback The same operation can be performed with the operation button B Clear the selected title This clears the selected data from the image memory of the AG MX70 For details refer to Clearing Title data page 90 The same operation can be performed with the operation button or with Ctrl R Clear all titles This clears all data in the transmission list from the image memory of the AG MX70 For details refer to Clearing Title data page 88 The same operation can be performed with the operation button i or with Ctrl T Auto Take This executes Auto Take using the AG MX70 85 Tool menu Memory status This displays the memory status screen For details refer to Checking the memory status of the AG MX70 page 90 AG MX70 setup This displays the memory setting screen For details refer to Changing the AG MX 70 memory settings page 90 and Recalling events page 91 Properties initial value setting This displays the Properties initial value setting screen For details refer to Initial set of Property data page 92 Operating environment This displays the Operating environment screen For details refer to Setting
90. lect any image size for playback however if the image size selected is larger than the Monitor 1 screen only the part of the image that fits onto the screen will be transmitted and played back E Image formats supported It is possible to use the following image formats for playback with the AG MX70 e TARGA tga 24 bit pixel no channel data and 32 bit pixel with a channel data can be used e JPEG jpg e BMP bmp 24 bit pixel no a channel data can be used A 32 bit pixel image of the TARGA format must be used when the image is to be displayed with transparency processing When displaying images using either MOVIE ROLL or CRAWL methods it is necessary to use consecutively numbered file names e g Image001 tga to Image015 tga Processing of image data B Management of the image memory e Memory capacity Images transmitted from the PC are stored in the AG MX70 s image memory The memory capacity differs depending on the AG MX70 s video format setting NTSC 30 pages 1 page amount of memory required for 1 image on Monitor 1 screen PAL 26 pages The image memory is divided into separate areas for Title data and IntVideo data and capacity can be allocated freely as required e DIVIDE The number of memory pages used differs depending on the number of vertical pixels however this only applies when images are transmitted as Title data The memory pages being used can be reduced by adjusting the size of the i
91. lled successfully Execute DrvUninstaller exe in the DrvUninstaller folder of the setup CD ROM to delete the USB driver at this time the message Cannot delete some files may be displayed but this does not present a problem and then install the USB driver again elmage transmission or reading has been performed but the processing stopped and the message AG MX70 is not ready to transfer Please check Power and connection and try again is displayed Images cannot be transmitted or captured while the Loading display appears on the LCD screen immediately after the AG MX70 s power has been turned on or immediately after changes have been made to the image memory settings Wait until the Loading display is cleared and then try again eThe image does not change to DSK even when DSK playback operation is performed Check that the DSK Fade items Key and Fill in the DSK Fade menu of the AG MX70 are set to Title 95 Before calling for service MX Navi related problems Problem What to check e Patterns set for DSK ON and DSK OFF for Title data are changed e The Title data has been cleared but the data has not been deleted from the image memory When the set pattern can not be used for DSK the pattern is changed automatically to a different pattern When Protect has been set for the data it will not be cleared even when clearing is performed from the menu of
92. mage for DSK playback so that a larger number of images can be played back Number of vertical pixels Number of memory pages used 1 to 60 1 8 page 61 to 120 1 4 page 121 to 240 1 2 page 241 to 480 1 page 1 to 72 1 8 page 73 to 144 1 4 page 145 to 288 1 2 page 289 to 576 1 page lt Notes gt e When the vertical position is set images with a small number of vertical pixels can be played back on the lower part of the screen This is effective for DSK playback of telop or logos at the lower part of the screen e IntVideo data always use one memory page regardless of the image size 76 Before use AG MX70 connections It is necessary to connect the PC to the AG MX70 using the USB cable before installing the software Follow the steps below 1 Turn off the power to the AG MX70 2 Connect the PC to the AG MX70 using the USB cable Insert the USB cable connectors into the corresponding USB ports on the PC and on the rear panel of the AG MX70 This completes the connection When the 2 units are being connected for the first time install the USB driver by following the steps in Installation of USB driver below lt Note gt The USB cable is not supplied with this unit Use a commercially available 3 m or shorter USB cable Note that if the cable to be used is more than 3 m in length communications may not be performed correctly Installation of the USB driver It is neces
93. mber is displayed This is displayed for data with the Protect setting O Order The order of the data in the transmission list is displayed This is the same as with icon mode D The Divide value of the data is shown OF The number of images of the data is shown ON The operation at the time of DSK ON will be displayed When double clicked the Properties window page 86 will open 00 15 DISS lt 9 Trigger setting Special effects Slide setting image3 ipg DTYPE The data playback format will be displayed When double clicked the Properties window page 86 will open 00 03 00 4 Data playback format PH stil Duration This appears only when Auto Trigger of DSK OFF is valid Bs Movie Once e Movie Repeat E Crawl E Rol OFF The operation at the time of DSK OFF will be displayed The display contents are the same as for DSK ON When double clicked the Properties window page 86 will open NAME COMMENT The name given to the data will be displayed When double clicked the Properties window page 86 will open The yellow frame is the cursor The data marked by the cursor will be the object for transmission deletion memory clearing property setting etc When the mouse is left clicked on data the cursor will move to that data When Ctrl is held down several titles can be selected by left clicking and when Shift is held down the titles between the first cli
94. n be used Updating to the joystick value occurs when this button is set to OFF ASPECT ratio control This control is used to set the aspect ratio for key patterns whose aspect ratio can be set When it is turned in the H direction the width horizontal is increased when it is turned in the V direction the height vertical is increased Aspect ON button When this button is at ON the setting performed by the aspect ratio control takes effect When it is at OFF the default aspect ratio center value is established EDITOR enable button Editor enable can enable or disable control using RS 422A and when control is disabled settings can be performed by manual operations even during editing operations using RS 422A When the lamp of this button is lighted ON the settings from the editor are accepted when it is off OFF the settings are canceled and the settings can be performed manually Parts and their functions O REV reverse button MIX button This button is used to reverse the keys and transition key This is used to call mix transitions patterns reverse the frame in out and reverse the chroma key luminance key external key and title a key LUM luminance key button signals This is used to call the luminance key When it is called The button s lamp flashes with patterns that have no the previous setting is stored in the memory reverse operations indicating that these patterns cannot be
95. nctions with the exception of AUX 1 and AUX 2 can be set e Connection of conversion cable RS 232C AG MX70 25 pin 9 pin 1 TXD 1 SPARE 3 RXD 2 RXD 4 RTS 3 TXD 5 CTS 4 DTR 6 DSR 5 SIG G 7 SIG G 6 DSR 20 DTR 9 SPARE DCE CONNECTION Use the above conversion with the 9 pin straight cable as well lt Notes gt Editing using the RS 422A RS 232 and GPI interface connectors e The commands are received and then executed 3 frames later e If while the 3D optional board is installed the 1 Frame Dly mode has been selected by the system 1 settings see page 56 on the Setup initial setting screen the pictures and sound from the source are always output with a 1 frame delay e When selecting a DVE pattern set the transition time to more than 2 frames No guarantees are made for frame accuracy if the time setting is lower than this Tally An open connector is provided for outputting the tally lamp signals Output for cross point 1 Output for cross point 2 Output for cross point 3 Output for cross point 4 Output for cross point 5 Output for cross point 6 Output for cross point 7 Output for cross point 8 or EXT GND oO CO NOA A WO N System Diagram By connecting cameras VTRs and other video components this unit can digitally process the video signals of these components Example 1 Live application 1 KEY Genlock ADV RER
96. nd spark using the rotary 3 control Select the Self original image Self spark BodM border color or BodM spark border spark The time can be set to any value from 1 to 32 using the rotary 4 control When trail has been set the trail offset position can be set by setting the position while holding down Shift In this case the center scene grabber and hold buttons flash temporarily Whichever trail or shadow effect was selected last among trail and shadow for DSK and multi strobe and decay for A B videoEffects takes effect and the previous effect is canceled lt Note gt R1 R2 R3 R4 R5 Light On Off Lights Shadow when 3D Trail board has been installed R1 R2 R3 R4 R5 Light On Lights when 3D board has been installed R1 R2 R3 R5 Light Trail On R4 Time 16 Self 1 32 Lights Self spark when 3D a board has been BodM spark installed Only one of three settings namely soft border or soft border for both multi strobe and pattern edges can be selected when a special pattern has been selected For further details refer to the note on page 26 33 Effect by effect setting screens Chroma Key setting The chroma key is opened directly or when selected using the number keys The RGB selected color display can be selected using Shift rotary 2 Alternatively the number of the selected color can be switched and written over the exis
97. nergy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD KEEP THIS EQUIPMENT AWAY FROM ALL LIQUIDS USE AND STORE ONLY IN LOCATIONS WHICH ARE NOT EXPOSED TO THE RISK OF DRIPPING OR SPLASHING LIQUIDS AND DO NOT PLACE ANY LIQUID CONTAINERS ON TOP OF THE EQUIPMENT CAUTION TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD REFER MOUNTING OF THE OPTIONAL INTERFACE BOARD TO QUALIFIED SERVICE PERSONNEL LT indicates safety information CAUTION TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE USE THE RECOMMENDED ACCESSORIES ONLY CAUTION Do not install or place this unit in a bookcase built in cabinet or any other confined space in order to maintain adequate ventilation Ensure that curtains and any other materials do not obstruct the ventilation to prevent risk of electric shock or fire hazard due to overheating Overview This digital audio mixer is designed for a host of applications including cases where the video signals of video equipm
98. ng Select G L or ExtKey as the Ref reference source using the rotary 2 control The default setting is G L mk Phase SC Phase Adjust the H Phase horizontal phase using the rotary 3 igen 128 512 control The default setting is 128 28 228 0 1023 Adjust the SC Phase subcarrier phase using the rotary 4 is En F control The default setting is 512 gilda H Phase and SC Phase are stored in the memory separately in accordance with G L or Ext Key for the input Video Format setting Either NTSC or PAL is selected as the format by the RI Ra is R4 ne rotary 2 control Video Aspect Pb Pr The default setting is the format used in the area where the Format NTSC 4 3 Beta When a change is to be made OK appears Execute the change using Enter and use Shift Enter to cancel Set 4 3 or 16 9 as the Aspect ratio of the patterns using the rotary 3 control The default setting is 4 3 Select 0 or 7 5 for Setup using the rotary 4 control The default setting is 0 Select Beta or M2 for the Pb Pr component level using the rotary 5 control The default setting is Beta When the NTSC or PAL format is changed the system is initialized and the INT V and title memories are cleared system was purchased ba 16 9 7 5 M2 NSTC ie Beta 55 Setup initial setting screen System1 setting This is use
99. nges according to the memory setting 16 9 4 3 of the main unit When double clicked the image display screen page 89 opens and the original image can be checked ON The operation at the time of DSK ON will be displayed When double clicked the Properties window page 86 will open 00 1 5 WH trigger setting Special v AutoTrigger is valid effects and DISS The time taken for DSK ON effect time to be established is 01 00 displayed at the side j AutoTrigger is not valid Slide oa setting TYPE The data playback format will be displayed When double clicked the Properties window page 86 will open 2 Duration 00 06 00 This appears only when Auto Trigger of CRAWL L DSK OFF is valid _ Data playback format LN Movie Once e Movie Repeat e EJ Crawl Lt Roll 81 OFF The operation at the time of DSK OFF will be displayed The display contents are the same as for DSK ON When double clicked the Properties window page 86 will open NAME COMMENT The name given to the data and the comment string will be displayed When double clicked the Properties window page 86 will open Screen descriptions List mode manual ei Mx navi iew Cusp alion Tools Help D Ker MMA A iP F 0 m5 OFF DISS Sample ipg crawl01 tga Diss FILE0000 tga MO For data with a Mark setting the Mark nu
100. nnel A Under the conditions below the Still Strobe and Multi Strobe for channel A are turned OFF when the Transition lever or key size adjustment Z has been changed or the compression rate has been changed by the aspect ratio Conditions When DSK Effects is OFF and any of the Rev or Dual PinP patterns below has been selected e 2DcompKey 2D 3Dcomp included Rev e 2DcompTrans Rev e 2Dcomp2Trans Rev e 2Dslide1 Trans Rev e 2Dslide2Trans Rev e When applying 2D compression effects to channel B Under the conditions below the Still Strobe and Multi Strobe for channel B are turned OFF when the Transition lever or key size adjustment Z has been changed or the compression rate has been changed by the aspect ratio Conditions When DSK Effects is OFF and any of the Norm or Dual PinP patterns below has been selected e 2DcompKey 2D 3Dcomp included Rev e 2DcompTrans e 2Dcomp2Trans e 2Dslide1 Trans e 2Dslide2Trans The processing procedure differs depending on whether the 3D optional board AG VE70 has been installed or nor Details are as follows e When the 3D optional board AG VE70 is not installed Pattern number selected Processing after cancel operation 1501 to 1533 28 to 31 36 to 42 128 to 129 2Dcomp 1541 to 1550 32 to 35 130 to 133 141 to 142 2chComp 1301 to 1333 43 to 46 51 to 54 138 to 140 2DSlide1 only Multi Strobe is set OFF 1341 to 1348 47 to 50 134 to 137 2DSlide2
101. not exceed 230 NTSC or 277 PAL Similarly if the left setting is changed the right setting will change and vice versa in such a way that the total setting will not exceed 680 The left and right settings can be changed in 2 step increments Border setting Select the Color border color using the rotary 2 control There are 10 choices White Yellow Cyan Green Magenta Red Blue Black Custom1 and Custom2 The default setting is White Custom1 and Custom2 are colors which have been set by INT Matte Effects setting The effects can be added in the same way as with the basic patterns The default setting is Off DVE Plus This takes effect only when the 3D optional board AG VE70 has been installed It is possible to add the DVEs in key numbers 3401 to 3478 3601 to 3623 6001 to 6003 6006 6007 and 6009 to 6634 Select On or Off using the rotary 2 control The default setting is Off The numbers are input using the rotary 3 4 and 5 controls The parameters for patterns with numbers 6001 to 6438 and 6601 to 6716 can be changed with 3D Modify 35 Effect by effect setting screens Luminance Key and EXT Key external key settings The luminance key and external key are opened directly or when selected using the number keys Pos X 128 Y 128 en mm Z 196 mn Event ME Time Pattern INT 00e 10 00F 3102 Wht Luminance Key ___ ac
102. nside the vertical blanking period VBIk The default setting is Off On or Off is selected using the rotary 4 control to set whether or not the DR dynamic rounding is to be performed The default setting is On Off Off lt Note gt Selecting Off for VBClean may result in a deviation in the amount of delay between the video signals and vertical blanking signals depending on the setting for the Dly item among the System1 settings and on whether the 3D optional board AG VE70 has been installed Bus setting AB AB bus or PrgPre program preset system can be RI R2 R3 R4 R5 selected as the bus system using the rotary 2 control The Type Audio Tally default setting is AB AB CP 8 AB On CP 8 On initiate Still or Off do not initiate Still when cross points are to be changed is selected using the rotary 3 control The default setting is On The Audio MIX system can be selected using the rotary 4 control At the CP setting two audio sources allocated to the selected cross point are output At the 1 2 setting the audio sources 1 2 allocated to the cross point are mixed at all times The default setting is CP 8 or EXT can be selected using the rotary 5 control as the setting for the eight tally outputs At the 8 setting the tally signal is output when cross point 8 has been selected at the EXT setting it is output when EXT has been selected Prg Pre Off 12 EXT
103. nsmission is in progress the LCD display of the AG MX70 shuts down e Before playback INT EXT must be selected by the AG MX70 Clearing IntVideo data The operation for deletion of transmitted IntVideo data from the image memory of the AG MX70 is described below 1 Select Tools Memory status from the menu of the main window to open the memory status screen 2 Left click the data to be deleted in the status display column of the memory status screen The data changes to selected status the color becomes darker Select Operation Clear specified area from the menu of the memory status screen The data is cleared 91 Saving data Title data or IntVideo data can be read to the PC from the image memory of the AG MX70 and can be stored as still images Use the following procedure 1 Select Tools Memory status from the menu of the main window to open the memory status screen 2 Left click on the data to be read into the PC in the status display column of the memory status screen The data changes to selected status the color will become darker 1 3 4 3 Select File Capture Title from the menu of the memory status screen to read in Title data Select File Save IntVideo from the menu of the memory status screen to read in IntVideo data Select the data by left clicking in the status display column Infvideo Area Enter the ima
104. operation When Demo is selected the demo mode is established after the power is turned on The demo mode can be exited by selecting Enter When the power is off the operation panel settings are stored in the memory Joystick The joystick is used both as the XY positioner and the controller for the color settings It is switched as required It can set X Y and Z for patterns that can be positioned It can also set the color corrector UV white balance and chroma saturation It can be used as the position X Y controller for the selection of the blue background when the chroma keys are set Rotary Z control This control is used to set the key size Z during the key position settings and the luminance setting Y among the color settings SCENE GRABBER button When this is set to ON with a specific key pattern it can paste the image in the key onto the pattern and move it lt Note gt It is possible to select either the multi strobe or scene grabber but not both Whichever one was selected last takes precedence and the previously selected effects are canceled X Y Pb Pr CENTER button Centering is performed when this button is set to ON In the case of color settings the color saturation is set to zero In the case of position settings the pattern is centered HOLD button The joystick operation is stopped when this button is set to ON However even when this button is set to ON the center button ca
105. reen e List folder The folder to be opened first for opening or saving a transmission list is set The default folder is the ListData folder created under the folder in which this application has been installed e Title folder The folder to be opened first when opening or saving Title data is set The default folder is the TitleData folder created under the folder in which this application has been installed IntVideo folder The folder to be opened first when opening or saving IntVideo data is set The default folder is the IntVideoData folder created under the folder in which this application has been installed List of short cut keys Move the cursor to the top Home Select all the data Ctrl A Move the cursor back by 10 Left arrow Delete the selected data Delete Move the cursor back Up arrow Cut out the selected data Ctrl X Move the cursor ahead Down arrow Copy the selected data Ctrl C Move the cursor ahead by 10 Right arrow Paste the data Ctrl V Move the cursor to the bottom Clear the selected data Ctrl R Jump to the data in DSK Clear all data Ctrl T Jump to the data of the corresponding Mark setting Undo Ctrl Z Open the properties of the selected data Redo Ctrl Y Transfer the selected data Play back the selected data Stop the data being played back S Automatically play back the data Shift Space 94 Before calling for service Troubleshootin
106. reen is displayed 2 Set the individual items and click the OK button to change the settings All settings can be returned to the initial value by pressing the Cancel button x forooo post pb 4 Still Duration 00 1000 Position X 0 ad Movie Duration 00 10 00 varsojfo vem fo A Roll Speed 8 3 PAL m CrawiSpeed 8 4 On Of IM AutoTrigger Effect Effect C Pattem Diss Time 02 00 Slide Dir ai Speed 8 nd Load Default Still Duration The duration is set for when Still is used as the data playback format Movie Duration The duration is set for when Movie Repeat is used as the data playback format Roll Speed The speed is set for when Roll is used as the data playback format Crawl Speed The speed is set for when Crawl is used as the data playback format Position The display position is set here The vertical position is different for NTSC and PAL X The horizontal position can be set from 0 to 719 Y NTSC For NTSC the vertical position can be set from 0 to 480 Only even numbers Y PAL For PAL the vertical position can be set from 0 to 576 Only even numbers 92 el Cancel Help C Pattern 1 Diss Time 02 00 Slide Dir aa Speed 8 ad ON OFF settings The operation at the time of DSK ON and DSK OFF is set For further details on each item refer to Setting the data playback propertie
107. ries installed 8 7 kg with all optional accessories installed 525 NTSC 625 PAL switchable Main input 9 bit External input EXT 8 bit 4 2 2 4 8 bits ON OFF switching for Dynamic Rounding processing enabled Key 13 5 MHz Y 13 5 MHz Pb Pr 6 75 MHz Component signal Y Less than 54 dB Pb Pr Less than 52 dB Composite signal Y C Less than 50 dB Main input Ys 0 5 MHz to 4 5 MHz 1 0 dB Pb Pr 0 2 MHz to 2 0 MHz 0 5 dB to 3 0 dB External input EXT Y 0 5 MHz to 4 5 MHz 1 0 dB Pb Pr 0 2 MHz to 2 0 MHz 1 0 dB Less than 1 Less than 4 2 48 kHz Analog Input 20bit Digital Input option 24bit 20 Hz to 20 kHz 1 0 dB to 1 0 dB More than 85dB analog In out Less than 0 05 1 kHz Less than 70 dB 1 kHz between any two channels 20 dB 18 dB switchable 97 Specifications VIDEO INPUT OUTPUT Analog component input output connectors Analog composite input output connectors YC input output connectors EXT external input connector G L input connector Preview output connector Advanced reference input connector AUDIO INPUT OUTPUT Analog audio L R connectors AUX input L R connectors Audio output L R connectors Mic input jack Headphone output jack OTHER Editor Connectable Editor Tally Out GPI USB BNC x 4 sources 1 2 3 4 Y 1 0 Vp p 75 Q Pb Pr 525 0 525 0 757 Vp p switchable 75 Q Pb Pr 625 0 7 Vp p
108. ring transiting the transiting stops at the position where it was pressed While the transiting is stopped it flashes pressed again the transiting resumes When it DSK execution button This enables DSK which was set on the DSK FADE setting page to be executed During execution its lamp lights during DSK it flashes Parts and their functions Audio mixer area SOURCE 1 5 fader This fader is used to adjust the audio level of input 1 which was set on the initial setting page when it is operated together with the shift key it is used to adjust the audio level of input 5 The operation of the fader lever takes effect from where the internal level and lever position match or where the higher lower relationship between them has been reversed when the input has been switched SOURCE 2 6 fader This fader is used to adjust the audio level of input 2 which was set on the initial setting page when it is operated together with the shift key it is used to adjust the audio level of input 6 The operation of the fader lever takes effect from where the internal level and lever position match or where the higher lower relationship between them has been reversed when the input has been switched SOURCE 3 7 fader This fader is used to adjust the audio level of input 3 which was set on the initial setting page when it is operated together with the shift key it is used to adjust the audio level of input 7 The
109. rk has been selected Width can be set to any value from 0 to 255 using the rotary 3 control The default setting is 32 Size can be set to any value from 1 to 3 using the rotary 4 control The default setting is 2 Time can be set to any value from O to 255 using the rotary 5 control The default setting is 255 This level and other settings are used as the transition number 1982 settings 28 R1 R2 R3 R4 Level Time Ripple 32 64 Off R5 0 255 0 255 0 5 Ripple Multi R1 R2 R3 R4 Level Time Ripple 32 64 R5 0 255 0 255 0 5 R1 R2 R3 R4 R5 Reverse Off On 0 15 0 255 Off R1 R2 R3 R5 Time 255 R4 0 255 1 3 0 255 Video Effects setting screen lt Notes gt In the case of pattern numbers 200 to 211 1001 to 1034 213 to 220 222 1060 to 1067 and 1069 transitions can be initiated with the DVE setting parameters applied to the B channel When this is done the pattern is changed to MIX 56 With the A bus B bus With the preset bus program bus the effects are applied to preset and they are turned off by setting the reverse button to ON e Ripple Multi Spark and other 3D patterns can be selected for one channel only either A or B The pattern selected last takes precedence and the previously selected pattern is canceled 1 The other 3D patterns are as follows
110. rt the system The demonstration mode can be exited using Enter The panel settings setup settings and their files key learn settings and event memory data are saved These settings and data are backed up by the flash memory even when the power is turned off Setting panel screen The unit s various functions are adjusted on the setting panel screen This screen is basically configured as follows e Displayed at the top level of the screen are the joystick XY and rotary Z values and the audio meter e Displayed at the second level of the screen from the top are the event number transition time pattern number and internal video setting e Displayed at the third level of the screen from the top are the title of the menu on the display and the item setting ranges e The settings are displayed from the center down The settings of four items are displayed per page If there are more than four item settings they can be scrolled and displayed using the rotary 1 or 2 control Two lines are allocated to each item and 7 or so alphanumerics are displayed per item In some cases abbreviations are used for the displays The display of selected setting item is highlighted in reverse video e Selected setting items are returned to their default settings using Shift INTVideo internal video setting screen Wash Pb128 Pr 128 r Y 128 Event ME Time Pattern O0E 10 00r 30
111. s Select the key signals using the rotary 2 control Either Pi Pa Mode EXT external or Title can be selected Write Select the key fill signals using the rotary 3 control EXT 1 30 26 Write external input Title or BodMat border matte can be zl NSTCIPAL Preview selected Select the page number of the title memory using the rotary BodMat alg 4 control The total number of pages can be changed on the Setup setting screen Set the operation using the rotary 5 control Either Write or Preview can be selected Set Mode to Write and use Enter to save the external input in the memory Set Mode to Preview and select Enter to initiate the preview display It is now possible to check the slides or movie movements from On to Off The default setting is Preview When Title has been selected for Key and Fill and preview is initiated the title star and heart keys are canceled and changed to MIX 56 The title page can be selected using the rotary 4 control The first number is for the page and the second number for the sub pages When part of a group has been selected playback is initiated from the start of that part Writing initiated by Write applies to the entire screen Sub frames are ignored If the page concerned is used as a group the pages of the entire group will be cleared as well Since the saving that is initiated by Write supports only the EXT external inputs
112. s page 86 e AutoTrigger OFF only When this is checked the OFF Trigger is set to Auto e Effect The pattern to be used for special effects and the special effects time are set here e Slide The slide direction and the speed are set here Other operations Setting the operating environment The operation settings for this application can be set on the operation environment screen File Management When adding an image that has once been used as title data to the transmission list select whether the previous 1 Select Operating environment from the Tools menu of the main window The Environment screen will be displayed 2 Set the individual items and click the OK button to change the settings xi Boot and Shutdown lemory management F Resume mode V Memory clear when re connect E Confirmation mode fv Clear the protected data C Confirm using previous property File Management G Always Use previous property Clear previous property C Not use previous property arget folder List folder Browse Browse Browse C Program Files Panasonic AG MOCT UM Te folder C Program Files Panasonic AG MX7 OM invideo folder C Program Files Panasonic AG MX7 0M Ld Cancel Help Boot and shutdown The operation at the time of boot and shutdown of this application is set e Resume mode When this is checked the transmission list which was open when the application was shut do
113. s are registered trademarks of Microsoft Corporation of the United States in both the U S and other countries e Dynamic Rounding and the DR logo are registered trademarks of Quantel Ltd in both the United Kingdom and other countries Contents MX Navi About this software nanne nennen 74 Description of the software nnn ennnen vennen vennen 74 System requirements aannnannvannennenennennenennnenseen 74 Overview Of MX Navi nnn nennen eenen 74 Processing of image data nnen 75 By data type nnnnnnnnnnseneneneerensenrennnenrnenenvennenvennne 75 Display methods annae nennen eennnenenenenvenseneenner 75 DSK eff BES anar saanesenrarrzaansersnandnanneansnadansnanenatsadnnnndnn 75 Image SIZE nnn annenrnnnneneneneerensenrennnenenenenvennenvennn 75 Image formats supported annen ennen vennen vennen 75 Management of the image memory aaneen 76 Before USC snssersarrserseernerrenennersnenrvensnennnevdnnse 77 AG MX70 connections nnen enen enennneeenennerenn 77 Installation of the USB driver nan aaneen 77 For Windows 98 and Windows 2000 77 For Windows ME ane zansenvesenensnnsenwenvensnenvennin 78 FOr WindOwsSs XP ziuassssreereesnenrserrznnnensenrnnsipddkenden 78 Installation of MX Navi nnnnnennnnnnnnneneeennnenneeneen 79 Operation confirmation nnnnnnnnnnunnneenneennnnennvenneen 79 Startup and shutdown nnen neee vereen 80 How to start up MX Navi
114. s enabling chroma key luminance key mix wipe and DVE combinations as well as DSK and fading e Internal event memory The unit has a built in memory that accommodates 100 patterns e Advanced reference 1 output featured Contents AG MX70 OVERVIEW seinen taankenenneeeneenn iaaiiai edina 3 Audio Effects settings 49 Parts and their functions 6 PAN Setting 5 zevssnarsrersevaerseeverdandendtanvaneheandddenrend dense 49 Front panel controls aa naanenennneenenennenenenennens 6 EQ equalizer setting nnn nnnnennnernnnennnenenen 50 Rear panel connection area nnnannennenennnnnent 14 EQ Mid equalizer midrange Setting 50 External interfaces ssssssssssesersssseeesessees 17 Voica voles changer SNG edentate oe EE dg SEN oren a0 RS 422A emeente veen 17 Setup initial setting screen nnn 51 RS 2320 nee 17 Power power ON setting nnn 52 Taly e ennen 17 Direct Pattern setting nnn vernamen eenn 52 System diagram nnn vene venenenenenenenenenn 18 Audio Video Input settings nennen nnneerennneen 54 Memory setting unnnenneneenenneneenneeerenneerenenen 55 hade dee an Gen Lock external synchronization setting 55 Setting panel SCreen nsnssnnnnnnnnnnenneennenennenen 20 Video Format Setting nennen annannnen ee nnnnnnene nen 55 INTVideo internal video setting screen 20 System Setting nennen 56 Color Effects setting Screen 23 System2 set
115. sary to install this driver in the PC to enable USB communications between the PC and AG MX70 after they are connected for the first time It is only necessary to install the USB driver software once Follow the steps below For Windows 98 and Windows 2000 lt Notes gt e The steps outlined below are for Windows 98 With Windows 2000 the screens will differ slightly but the driver software can still be installed following the same steps e Be sure to log on as a user with Administrator rights when installing this software in a PC with Windows 2000 1 Connect the PC to the AG MX70 correctly 2 Turn on the power to the PC Check that Windows has started up 3 Place the setup CD ROM in the PC s CD ROM drive 4 Turn on the power to the AG MX70 After a short while the Add New Hardware Wizard dialog will be displayed 5 Click on the Next button This wawd searches Hor nes dhean lee AGMTD A device diver a schamen that makes a ratane device mor 77 6 Select Search for the best driver for your device then click on the Next button Add New Hardware Wizard What do pou want Windows to do g EL alaa CD at of oll the divers in a specific isplay location s0 you can select the diver you wari 7 Place a check next to Specify a location enter the USB_DRV folder in the setup CD ROM as the search location and click on the Next button Add New Hardwar
116. sition 3 Pattern selection Same as for AB transition 4 Execution Same as for AB transition The transition can be executed by repeating steps 2 3 and 4 Key 1 Preparation Slide the transition lever to the A side The A bus now becomes the background 2 Input selection and preview Select the input source to be inlaid using the B bus cross point button The preview selection can now be set as ME and the keyed images can be previewed at the Preview connector In the case of chroma keys the colors are selected using the cursor on the preview screen 30 3 Pattern selection Select the pattern using the direct transition button or using the number keys Patterns with numbers 3000 and up are key patterns Perform the border shadow trail and other settings on the LCD setting screen The separate border trail and other settings are stored in each direct button and read out 4 Key adjustment Adjust the slice slope and other settings on the LCD setting screen 5 Execution Slide the transition lever to the B side or set the ME transition time and press the Auto Take button DSK key 1 Preparation Check that the DSK button s lamp is neither lighted nor flashing If it is lighted or flashing it means that the DSK ON status is already established so press the DSK button to turn off the lamp 2 Setting Select the input source of the transition destination using the Preset bus cross point button The preview
117. spoint 7 8 crosspoint 8 AUX1 or AUX2 using the rotary 1 control Select the item from PAN EQ equalizer EQ Mid equalizer midrange Voice voice changer or Mute using the rotary 2 control PAN setting Set On or Off using the rotary 3 control The default setting is Off Select the input channel to be used using the rotary 4 control Select L R or L R The default setting is L Set the output balance using the rotary 5 control Make the selection from L7 to 0 to R7 The default setting is 0 49 R1 R2 R3 R4 R5 IN Ch Balance L 0 On L L7 0 R7 Off R L R Audio Effects settings EQ equalizer setting This is used to set the equalizers R1 R2 R4 R5 Set On or Off for all equalizers using the rotary 3 control L Level H Level The default setting is On 0 0 R3 The L Level bass level can be set in 2 dB intervals to any On Fee Pg Ad Off value from 14 dB to O to 14 dB using the rotary 5 control The default setting is 0 The H Level treble level can be set in 2 dB intervals to any value from 14 dB to O to 14 dB using the rotary 4 control The default setting is 0 EQ Mid equalizer midrange setting The M Level midrange level can be set in 2 dB intervals to Rs R1 R2 R3 R4 any value from 14 dB to 0 to 14 dB using the rotary 3 M Level control The default setting is 0 0 The midrange frequency can be se
118. stallation destination will be displayed If the destination shown is the one desired just click the Next button To change the installation destination click the Browse button change the installation destination and click the Next button Choose Onstnation Lecation Select lader whens Setup wd mita be Seng nel metal MOY Hon for AG MOTO in thee bokova Foden To mata bo fre beker chch Newt To natal to a Simeri olden cick Browne and select another baken Destraton Foder C Program Fies Panonio AG MTTM A tr EE cme The screen for selecting the installation type is displayed When Typical has been selected the program files of MX Navi and sample images are installed When compact has been selected only the MX Navi program is installed Select the type and click the Next button Setup Type Select the Setup Type to metal Cek the ype of Setup pos preter hen chh Hest eed Progam wii be ectaled wih the mest commen aston Piecommended fee mt wen C Compact Pagon wil be retailed wth rraren seqared ogoni C Ceto Yournay chocas he options pou mart to instal Recommended for advanced nets cen nee J Cc 79 5 6 The installation contents confirmation screen appears To proceed with the installation of the contents shown click the Next button To change the contents use the Back button to return to the previous screen and change the settings
119. t to any value from 100 14 14 Hz to 10 2 kHz using the rotary 4 control The default 100 Hz 0 5 setting is 1 01 kHz 10 2 KHz j1 Select 0 5 1 2 or 5 for Q using the rotary 5 control 2 The default setting is 0 5 5 Voice Change voice changer setting This is used to set the voice changer R1 R2 R3 R4 R5 Set On or Off using the rotary 3 control The default Voice Level setting is Off Change 5 On Up 0 10 Set Up or Down for the Pitch using the rotary 4 control The default setting is Up Level can be set to any value from 0 to 10 using the Si Down rotary 5 control The default setting is 5 Mute setting R1 R2 R3 R4 R5 Set the mute level using the rotary 3 control Off 12 dB 20 dB or 60 dB can be selected The default setting is Off Select the channel to be muted using the rotary 4 control AB AB bus only ABAUX1 AB bus and Aux1 or All Off AR can be selected The default setting is All ee All 50 Setup initial setting screen Wash Ph128 Pr 128 i Z 196 I Event ME Time Pattern 00e 10 00F 3015 Setup Power Direct Pattern Audio Video Memory Title Scrolled display Gen H Phase SC Phase Lock Ref in 0 0 Video Aspect Setup Format NTSC 4 3 System1 Dly Time GPI 1Frame Sec ME System2
120. the data lt Note gt In order to perform DSK playback for the data it is necessary to set Key and Fill to Title using the DSK Fade item on the DSK Fade menu of the AG MX70 For details refer to page 46 Automatic transmission and playback of Title data The data from the cursor position to the end of the transmission list can be transmitted automatically and DSK playback can be performed automatically Select Operation Automatic title load from the menu of the main window AutoLoad q Play Order 1 Waiting Status Transfer Order 2 Status Transferring 73 The DSK status is displayed here The transmission status is displayed here This executes DSK ON OFF This stops automatic loading lt Notes gt e Any data that has not been transmitted will be transmitted automatically Transmission also will be executed during playback of other data e f the data transmission has not been completed by the time the DSK playback stage is reached standby status will be maintained until it is completed e After DSK playback data without the Protect setting will be cleared from the memory Clearing Title data The data written to the image memory of the AG MX70 will be cleared only by a clearing operation or when the power supply of the AG MX70 is switched off When space is required for transmission of new data delete any data that is not required The clearing operation is performed us
121. thod Event 00E One hundred panel statuses can be stored in event memories 0 to 99 Press the Set button set the event number using the number keys and enter the setting using Enter Set button Its lamp lights during the setting process When Enter is pressed it flashes for two seconds and then goes off When the setting is in progress Event is displayed in reverse video and the event is then entered using Enter Event numbers can be incremented and decremented using the and keys Empty events are indicated by E appearing next to the event number Recall method Press the Recall button select the event number to be loaded using the number keys and recall it using the Enter or Auto Take button Recall button Its lamp flashes while recall is underway It lights when the button is set to ON and goes off when it is set to OFF or when the recall is completed Since the input settings are not reflected during loading events are executed in respect of the input set beforehand Events 50 to 59 60 to 69 70 to 79 80 to 89 and 90 to 99 can be set consecutively in units of 10 events and also recalled consecutively so they can also serve as key frame settings Events are executed using the Auto button With the recall of events 50 to 99 the Setup status of the head event is valid Clearing events Set the number of the event to be cleared using Recall and execute clearing using Shift Enter
122. ting nnannnarennnennnneennnnenenneneneen 56 Video Effects setting screen 24 Bus setting i waupaiceoxandanducecaxsanaacueascsvannsnercassoacsecun lt is 56 Exs tion Of Etfeets nennen 30 wand sin Setin sas sasassansesensensnanzensansnranneaanardendsen 57 File setting rersnrrseervevnnsendersenennecnevrnvdnnsnevensdndeneine 57 FNO Choy Evect Setting Screens nemen 31 other Se sereen 58 Transition wipe pattern settings anneer 31 Event memory nnnannennnneennneerrenenennneennsenvennaerenenen 58 Chroma Key setting nnnananenennnenennnen nennen 34 i Pattern settings nnsnnnsurseensennennneennenneensenseensenn 58 eeen ee a Transition time setting nnnnnennneneennn ennen ennen 59 Title Key setting neun aneerennnenenneerennnenvennen 37 Basic Pattern Key Setting nennen nennen nennen 38 Transition patterns nnen 60 Other key settings nnnnnnnnsnrernrnrennenenenennnenenenn 39 Key patterns nana nnennenenneneanenennenenenn 68 DSK Fade settings ccssseeeeesseeeeeeeesees 46 DSK Source settings nnnannnenenenen ennen venen 46 DSK Key settings nan saneeenerzennersenenansnnenvenennnnenns 47 Crop setting snaren ssanersneernnecnnnerndnnsenenreanannenneeinn 47 DSK On Off setting nnnnnann aaneen nennen eene nennenn 47 Fade SelNGS oaisacseenedeenetenenwmenesrerranknndnennknnndenkecnek 48 e Microsoft and Window
123. ting data ME is automatically selected for the Preview output and the chroma key cursor and keyed output are displayed X 128 Y 128 Pos Display of selected Z 196 y number 1 2 or 3 is 00E Event ME Time Pattern A selected Chroma Key 1 G B z Ee Selected color display Key Slice Slope K Level 0 0 255 Color Offset C Slice C Area Mono Cancel 0 0 0 L gt Kejdsip pajjoi9s Displayed only with 3Dop Key setting Align the cursor on the chroma key Preview screen with the color blue to be extracted using the joystick XY and use Enter to enter it Up to three colors can be stored in the memory and the values are displayed for R G and B When four or more colors have been selected only the last three will be stored in the memory To cancel a selected color which is stored in the memory select Shift Selected color number The Slice level can be set to any value from 0 to 255 using the rotary 3 control Slope can be set to any value from 0 to 15 using the rotary 4 control The K Level key transparency level can be set to any value from 0 to 255 using the rotary 5 control This can be set separately from the other keys 34 Displayed by DVEPlus only with special patterns R1 R2 R3 R4 R5 Key K Level 255 0 255 0 15 0 2
124. to the setting mode Use Shift Enter to cancel When Default is selected using the rotary 2 control and Enter is pressed OK appears so press Enter to change to the default setting When V Link is selected using the rotary 2 control and Enter is pressed OK appears so press Enter to change operation so that the audio input is matched with the video input Factory settings Event ME Time Pattern INT 00e 10 00F 3015 Wht Audio Video Input Setup Z Enter to EXIT 1 IVS Video A S 1 Analog 2 V S 2 Video A S 2 Analog 3 V S 3 Video A S 3 Analog _ 4 V S 4 Video A S 4 Analog 5 V S 5 Video A S 1 Analog 6 V S 6 Video A S 2 Analog 7 V S 7 Video A S 3 Analog 8 V S 8 Video A S 4 Analog AUXin Mic SS R1 R2 R3 R4 R5 Setting method Press the button of the cross point to be set Alternatively select the button of the cross point which is to be set using the rotary 1 control The lamp of the selected button flashes and the bus is automatically output to Preview When the cross point has been selected using the rotary 1 control the A bus is output to Preview Select V S 1 V S 2 V S 3 V S 4 V S 5 V S 6 V S 7 or V S 8 as the video input using the rotary 2 control Select Video composite YC Y Pb Pr component or SDI using the rotary 3 control Except for Video the sources extend from S 1 to S 4 so 5 is changed to 1 6 to 2
125. trol is used to adjust the level of the rear panel headphone PHONE output The sound of the portion to be faded using the DSK Fade setting can be monitored before fading so that it can be heard even when AudioFade is used The sound is output from the rear panel Since the audio meter displays the Prog output level it will remain unchanged even when the headphone level is changed TIME time setting rotary control This control is used to set the ME DSK and FADE transition times PATTERN transition key pattern number setting button Set this button to ON to set the pattern numbers using the number keys At its OFF position the time can be set using the number keys O ME ME transition key transition time setting button Set this button to ON to set the time to be applied to the ME transition key using the time setting rotary control When the pattern number setting button is OFF the time can be set using the number keys DSK DSK transition time setting button Set this button to ON to set the time to be applied to DSK using the time setting rotary control When the pattern number setting button is OFF the time can be set using the number keys FADE fade transition time setting button Set this button to ON to set the time to be applied to the FADE using the time setting rotary control When the pattern number setting button is OFF the time can be set using the number keys 11 Number keys 1 to 9 These keys
126. uced when the key concerned is pressed on its own Enter key This key is used to enter numerical values When OK appears on the LCD display press this key to enter the setting Entry is canceled when it is pressed together with the shift key Parts and their functions MIJ EFFECTS W INT EXT SHIFT key This key has the same function as the shift key for the number keys A PROG SOURCE 1 5 selector button This button is used to select source 1 selected by the initial settings for the A PROG bus When it is pressed together with the shift key source 5 is selected B PRESET SOURCE 1 5 selector button This button is used to select source 1 selected by the initial settings for the B PRESET bus When it is pressed together with the shift key source 5 is selected A PROG SOURCE 2 6 selector button This button is used to select source 2 selected by the initial settings for the A PROG bus When it is pressed together with the shift key source 6 is selected OG B PRESET SOURCE 2 6 selector button This button is used to select source 2 selected by the initial settings for the B PRESET bus When it is pressed together with the shift key source 6 is selected A PROG SOURCE 3 7 selector button This button is used to select source 3 selected by the initial settings for the A PROG bus When it is pressed together with the shift key source 7 is selected B PRESET SOURCE 3 7 selector button
127. udio level meter This indicates the level of the output sound Event number display area The event numbers are displayed here Time display area The ME DSK and FADE transition times are displayed here Q Pattern number display area The transition and key numbers are displayed here Internal internally generated video display area The settings for the internal video signals are displayed here Setting page display area The name of the page which has been set by the button operations is displayed here Rotary control setting position display area The currently set positions of the rotary 1 2 3 4 and 5 controls are displayed here Scroll bar This displays the position on the page of the item currently displayed Item parameter setting area The details which are set using the setting pages are switched and displayed here The selected settings are displayed negatively and the parameters can each be changed using the rotary 1 2 3 4 and 5 controls Rotary 1 control This control is used to set the parameter of a selected item Rotary 2 control This control is used to set the parameter of a selected item Rotary 3 control This control is used to set the parameter of a selected item Rotary 4 control This control is used to set the parameter of a selected item Rotary 5 control This control is used to set the parameter of a selected item Parts and their functions EE K
128. ult setting is 8 This level setting is used for the level of transition numbers 1001 1002 and 1003 200 201 and 202 Defocus setting Select On or Off for this effect using the rotary 2 control R1 R2 R3 R4 R5 The default setting is Off Level Select level 0 to 7 using the rotary 3 control The default eee ae a setting is 2 ca This level setting is used for the level of transition number 1004 203 It cannot be made to take effect at the same time as a 2 dimensionally compressed pattern lt Note gt Either Mosaic or Defocus can be selected The effect selected last takes precedence and the previously selected effect is canceled Mono monochrome setting Select On or Off for this effect using the rotary 2 control R1 R2 R3 R4 R5 The default setting is Off This effect takes precedence over the setting initiated by ee o a Color Effects On Off 25 Video Effects setting screen Time Effects still strobe setting Select the still or strobe effect with Video Effects ON using R1 R2 R3 R4 R5 the rotary 2 control Time Time Effects 10F Off Field 1 2 124 Still Frame 4 Manual Strobe 9 16 R4 R9 R16 R1 R2 R3 R4 R5 e When Off has been selected Effects Off R1 R2 R3 R4 R5 e When Still has been selected Either Field or Frame is selected as the type using the rotary 3 control The default setting is Field Time Effects Still
129. with three connectors to support four external interfaces a GPI input connector RS 422A RS 232 9 pin connector and a Tally output connector Select the connector that suits the editing controller model used B GPI general purpose interface This enables the use of auto takes with the GPI output of the external controller At the fall of the GPI signal wipe mix set on the panel or DSK or Fade is executed E RS 422A This enables the AG A850 external editing controller to be connected to the unit and the VTR to be controlled from a remote location e Functions that can be controlled from the AG A850 O Wipe settings OMixing OAuto take time and auto fade time settings ODownstream key fade in and fade out OCross point source 1 source 2 source 2 source 3 or source 3 source 4 switching Cross mode switching is performed by the RS 422A RS 232C selector switch on the rear panel Support for the editing controller is shown below e Connections 1 Set the RS 422A RS 232C selector switch to RS 422A 2 Connect the connecting cable from the AG A850 to the editing controller connector on this unit 3 The pin layout of the editing controller connector is shown below FRAME GROUND TRANSMIT A RECEIVE B RECEIVE COMMON SPARE TRANSMIT COMMON TRANSMIT B RECEIVE A FRAME GROUND 2 3 4 5 6 7 8 9 E RS 232C This enables the unit to be controlled using a personal computer All of the unit s fu
130. wn the last time will be opened at startup and the status effective at the time the application was shut down the last time will be re established When this is not checked a new transmission list will be opened at startup e Confirmation mode When this is checked the confirmation screen will be displayed when the application is shut down Memory management The operation when the AG MX70 is connected to the PC is set When Memory clear when re connect is checked all Title and IntVideo data will be cleared when the AG MX70 is connected Check Clear the protected data when data with the Protect setting is also to be cleared 93 property settings are to be used The previous properties can be cleared using the Clear previous property button e Always Use previous property When the previous properties are still available the previous property settings are used again and again e Confirm using previous property When the previous properties are still available a confirmation screen for using or canceling the previous properties appears If the previous properties are not going to be used alternative properties are handled as new data e Not use the previous property The data will always be handled as new data Target folder The folder to be opened first when opening or saving data is set Enter the folder directly or click the Browse button and select from the displayed folder selection sc
131. y 43 Effect by effect setting screens With flag 6002 With page turn 6008 R1 R2 R3 R4 R5 R1 R2 R3 R4 R5 Page Turn K Frame K Level 00 255 Rotate Radius 128 3 R2 Width flag width setting R2 Rotate rotation setting R3 Angle setting R3 Angle setting R4 Time fluttering time setting R4 Turn setting R5 Amp amplitude setting R5 Radius setting 3D parameters are the same as with 3DModify 3D parameters are the same as with 3DModify With accordion 6003 With twist group 6009 to 6010 R1 R2 R3 R4 R5 R1 R2 R3 R4 R5 Accordion Twist K Frame K Frame 00 00 Width Rotate 192 128 R2 Width accordion width setting R2 Rotate rotation setting R3 Angle setting R3 Turn setting R5 Amp amplitude setting R4 Tilt setting 3D parameters are the same as with 3DModify With the perspectives group 6006 to 6007 R1 R2 R3 R4 R5 Perspective K Frame K Level 00 255 Rotate Depth 128 64 R2 Rotate rotation setting R3 Axis rotary axis setting R4 View viewer setting R5 Depth setting 3D parameters are the same as with 3DModify Key learn is not possible for doors 44 Effect by effect setting screens lt Notes gt When a compression effect has been applied to images some of the effects may be automatically canceled e When applying 2D compression effects to cha

Download Pdf Manuals

Related Search

Related Contents

Pleasant Hearth GFB100 Instructions / Assembly  PCAN-MicroMod Digital 1 & 2 - User Manual - PEAK  Specialized Command Post Adjustable Height Seat Post User's Manual  Plateforme à base de grid pour la gestion des connaissances  Manuel d`installation d`utilisation et de maintenance  Autoclaves para esterilización “Autester ST DRY PV IlI”  Final Report and Executive Summary    07-290 NS-LCD42HD combined  Manual de utilizare  

Copyright © All rights reserved. Failed to retrieve file