Gear Head KP2700USBHUB Calculator User Manual
Contents
1. USB Numeric Calculator Keypad Model KP2700USBHUB User s Manual Rev 060801 User s Record To provide quality customer service and technical support it is suggested that you keep the following information as well as your store receipt and this user s manual Date of Purchase Package Contents Your new Keypad will ship with the following items ff USB Numeric Calculator Keypad W ith Built In 2 Port USB Hub USB Retractable Cable Ss 1AAA Alkaline Battery B User s Manual B Warranty Information System Requirements Please be sure that you meet all of the system requirements below to avoid difficulties during installation Ss IBM PCs or 100 Compatibles B Windows ME 2000 XP S Available USB Port System Specifications Your new Keypad complies with the following specifications S USB Interface Special Function Keys Your Keypad has a set of special function keys located underneath the LCD screen please see the chart below for a description of each key Button Description Memory Add Press this button to add the number shown on the LCD screen to the memory Memory Subtract MRC MODE ON i Positive Negative fm SEND ol Press this button to subtract the number shown on the LCD screen from the memory Memory Re Call Press this button to show the number saved in the memory onto the LCD screen Switching M2. battery bay and then slide the cover back onto your Keypad until it securely locks 3 Your Keypad is now ready to be used in CALC Calculator mode 4 After 5 minutes of idle time your Keypad will turn off automatically to conserve battery power To resume press the lt MODE ON gt button on your Keypad Using the USB Hub There is a built in USB hub on your Keypad that gives you two additional USB ports To use the USB hub on your Keypad please follow the instructions below 1 Make sure your computer is turned on and you have properly installed your Keypad following the Installation section in this manual 2 Connect a USB device into one of the USB ports on the top of your Keypad gt ral 3 Your computer will detect the USB device connected to your Keypad 4 Depending on the USB device you are connecting to your Keypad please refer to your USB device user s manual to complete the installation NOTE The built in 2 port USB Hub can support a combined power consumption of approximately 300mA to the device s connected to the Keypad It is recommended to connect only low power consumption devices such as a flash drive mouse keyboard or any other low power USB devices to the USB Hub USB powered enclosures or USB hard drives might experience read write errors if connected to the USB Hub FCC Information FCC This equipment has been tested and found to comply with limits for Class B
3. digital device pursuant to Part 15 of Federal Communications Commission FCC rules FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation This equipment generates uses and can radiate radio frequency energy and if not installed or used in accordance with the instructions may cause harmful interference to radio communication However there is no guarantee that interference will not occur in television reception which can be determined by turning the equipment off and on The user is encouraged to try and correct the interference by one or more of the following measures B Reorient or relocate the receiving antenna s Increase the separation between the equipment and the receiver Ss Connect the equipment into an outlet on a circuit different from that to which the receiver is connected to CAUTION The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Warranty Information Gear Head LLC warrants that this product shall be free from defects in materials and workmanship for the reasonable lifetime of the product If the product 1s defective Gear Head LLC s sole obligation under this warranty shall be at its election subject to the terms of this warranty to repair or replace any
4. ation Your Keypad can be operated with one AAA battery or by connecting the enclosed USB cable from your Keypad to your computer For instructions on both of these operating methods please refer to the appropriate section below Using Your Keypad W ith The Retractable USB Cable 1 To adjust the length of the Retractable USB Cable pull both ends of the cable carefully NOTE the maximum length of the USB cable is approximately 30 inches 2 To retract the Retractable USB Cable pull both ends of the cable by approximately Y to unlock the cable and slowly retract it back into the cable retractor 3 Turn on your computer and wait for it to load 4 Connect the Retractable USB Cable to the small USB port on the top of your Keypad and then connect the other end to an avallable USB port on your computer eT D 0 _ p 5 Your computer will detect your Keypad and the necessary drivers will be installed auto matically NOTE Depending on system differences the Found New Hardware Wizard or Add New Hardware Wizard for W indows ME may appear If this occurs follow the on screen instructions to install your Keypad with the default option s and complete the installation Using Your Keypad With A Battery 1 To install a battery into your Keypad remove the Battery Compartment Cover on the back of the Keypad and install the enclosed AAA battery into your Keypad following the battery orientation guide in the
5. hnicians at 1 866 890 7115 Return Merchandise for Service Any claim under this warranty must be made in writing to Gear Head LLC at the address provide by our technician within 30 days after the owner discovers the circumstances giving rise to any such claim and must include a copy of this warranty document a receipt or copy of your invoice marked with the date of purchase and the original packaging You may obtain service by calling the technician for a Return Merchandise Authorization RMA number The RMA number must be prominently displayed on the outside of the shipping carton and the package must be mailed to Gear Head postage prepaid
6. ode Press this button to switch between CALC calculator and KEYPAD 16 keys pad mode Press this button to change the number shown on the LCD screen between positive and negative i Percentage Function Press this button to show the result with the last number entered treated as a percentage j Currency Exchange Function Set Currency Function 1 Press and hold the lt CUR gt button for about 3 seconds and then the CUR icon will blink on the top row in the LCD screen 2 Input the currency exchange rate for example if the exchange rate is 1 7 8 input 7 8 and then press the lt CUR gt button to save the rate 3 To change the currency exchange rate repeat steps 1 amp 2 Calculate Currency Exchange 1 To multiple a number with the currency exchange rate press the lt CUR gt button to show the CUR icon on the top row in the LCD screen then input the number to be calculated and then press the lt CUR gt button to get the result 2 To divide a number by the currency exchange rate press the lt CUR gt button to hide the CUR icon from the top row in the LCD screen then input the number to be calculated and then press the lt CUR gt button to obtain the result Send Function Press this button to send the number shown on the LCD screen to your computer if connected and a word processor e g Microsoft W ord is open Backspace This key functions as the lt Backspace gt key on your keyboard Install
7. parts deemed defective This warranty 1s for the exclusive benefit of the original purchaser and is not assignable or transferable THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED AND ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE TERMS OF THIS WARRANTY UNLESS OTHERWISE PROHIBITED BY LAW Exclusions To the fullest extent permitted by law Gear Head LLC expressly disclaims and excludes from this warranty any liability for damages including but not limited to general special indirect incidental consequential aggravated punitive or exemplary damages and economic loss even if Gear Head is informed of their possibility third party claims against you including for any loss or damages and claims or damages related to loss of or damage to your records or data This warranty does not apply to any product the exterior of which has been damaged or defaced This warranty will be voided by misuse improper physical environment improper repair acts of God war or terror commercial use and improper service operation or handling Technical Support Gear Head M provides Technical Support Monday Friday from 9 00 am 5 30 pm Eastern Time Before calling please make sure you have available the Model located on the front page of your User s Manual and information regarding your computer s operating system Please contact our tec
Download Pdf Manuals
Related Search