Gateway 2020 Computer Monitor User Manual
Contents
1. o kd dig BB A ER v 5 12 COLOR ADJUSTMENT IMAGE POSITION TRACKING www gateway com Description Preset Press the and gt buttons to adjust the color temperature 9300K is bluish white 6500K is reddish white default Red Green Blue Press the V button to move to the next color Press the lt and gt buttons to customize your color levels Vertical position Press the A and V buttons to move the image up and down Horizontal position Press the and buttons to move the image left and right You can also use the Auto function to configure the vertical and horizontal position automatically For more information on the Auto function see External controls on page 9 Clock Press the lt and gt buttons to minimize any vertical bars or stripes visible on the screen background The horizontal screen size will also change Phase Press the lt and gt buttons to remove any horizontal distortion and clear or sharpen the displayed characters OSD Menu OSD POSITION www gateway com Adjusting monitor settings Description Language Press the lt and gt buttons to change the language of the OSD menu Image Size Press the lt and gt buttons to change the size of the screen display area Transparency Press the2. be bent or pushed in Picture has shadows or ghosts m Press the AUTO button to automatically adjust the display image to the ideal settings m Remove any extension cables or switchboxes m Make sure that the video cable is connected securely to the back of the monitor and your computer For more information about connecting the power cord see Connecting the monitor on page 2 m Make sure that the video cable is not damaged m Checkthe video port and the end of the video cable for any pins that might be bent or pushed in Color is not uniform m Makesurethatthe monitor warms up for at least 30 minutes before making a final judgment about color uniformity or brightness m Press the AUTO button to automatically adjust the display image to the ideal settings 22 Troubleshooting Image is not sized or centered correctly m Press the AUTO button to automatically adjust the display image to the ideal settings m Use the position controls to adjust the image For instructions on how to adjust the display image position see Adjusting monitor settings on page 9 The monitor has pixels that are always dark or too bright This condition is normal and inherent in the TFT technology used in active matrix LCD screens Gateway s inspection standards keep these to a minimum If you feel these pixels are unacceptably numerous or dense on your display contact Gateway Technical Support to identify whether a repair or repl
3. Panel The Control Panel window opens 2 Click Double click the Display icon The Display Properties dialog box opens Adjusting monitor settings 3 Click the Settings tab Display Properties Themes Desktop Screen Saver Appearance Settings Display Gateway EV700 on Intel r 82810E Graphics Controller Screen resolution Color quality More High 24 bit v E Troubleshoot 4 Click the arrow button to open the Color quality or Colors list then click the color depth you want 5 To save your changes in Windows XP click OK then click Yes OR To save your changes in Windows 2000 click OK then click OK again n Help and Support For more information about adjusting monitor settings in Windows XP click Start then click Help and Support Type the keyword changing display settings in the HelpSpot Search box Search then click the arrow www gateway com 15 Using Your FPD 2020 Monitor Adjusting the screen resolution You can change the screen resolution to a size you prefer For example you can increase the resolution to fit more icons on your desktop or you can decrease the resolution to make reading and identifying objects on the monitor easier The higher the resolution the smaller individual components of the screen such as icons and menu bars appear Pi To change the screen resolution 1 In Windows XP click Start then click Control Panel The C
4. that the monitor power buttons are turned on If you have two computers connected to the monitor press the SOURCE button on the front of the monitor to switch between computers For more information about the SOURCE button see External controls on page 9 If the power LED is amber Make sure that your computer is turned on Move the mouse or press any key on the keyboard to bring the monitor out of Active Off mode Restart your computer with the monitor turned on Make sure that the video cable is not damaged Check the video port and the end of the video cable for any pins that might be bent or pushed in Turn off the monitor and unplug the video cable from the back of your computer Turn the monitor back on and wait for ten seconds If the monitor is functioning correctly a self diagnostic screen appears For more information about connecting the video cable see Connecting the monitor on page 2 21 Using Your FPD 2020 Monitor Display colors are wrong m Press the AUTO button to automatically adjust the display image to the ideal settings Restart your computer with the monitor turned on m Make sure that the video cable is connected securely to the back of the monitor and your computer For more information about connecting the power cord see Connecting the monitor on page 2 m Make sure that the video cable is not damaged m Checkthe video port and the end of the video cable for any pins that might
5. these low power states 19 Using Your FPD 2020 Monitor Maintenance To keep the monitor in optimal working order Do not block the ventilation holes Do not expose the monitor to rain or use near water Keep the monitor away from radiators or heat vents Keep the monitor out of direct sunlight To clean the monitor use a soft cloth slightly moistened with water only Wipe the cabinet screen and controls Caution Do not use any type of abrasive pad or glass cleaner You will permanently scratch the screen Troubleshooting If you have problems with the monitor the information in this troubleshooting section may help you solve them Important Make sure that the monitor has warmed up for approximately 30 minutes before making any judgments about the picture quality No power Make sure that the power cord is connected correctly to both the back of the monitor and the wall outlet For more information about connecting the power cord see Connecting the monitor on page 2 20 Troubleshooting No picture Make sure that the power cord is connected correctly to both the back of the monitor and the wall outlet For more information about connecting the power cord see Connecting the monitor on page 2 Make sure that the video cable is connected securely to the back of the monitor and computer For more information about connecting the video cable see Connecting the monitor on page 2 Make sure
6. with FCC rules FCC declaration of conformity 28 Responsible party Gateway Companies Inc 610 Gateway Drive North Sioux City SD 57049 605 232 2000 Fax 605 232 2023 This device complies with Part 15 of the FCC Rules Operation of this device is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Caution Changes or modifications not expressly approved by Gateway could void the FCC compliance and negate your authority to operate the product Regulatory compliance statements Canada Industry Canada IC Unintentional emitter per ICES 003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada Le pr sent appareil num rique n met pas de bruits radio lectriques d passant les limites applicables aux appareils num riques de Classe B prescrites dans le r glement sur le brouillage radio lectrique dict par Industrie Canada EPA ENERGY STAR As an ENERGY STAR Partner Gateway has determined that this product meets the ENERGY STAR guidelines for energy efficiency when used with a computer equipped with a Display Power Management System California Proposition 65 Warning Warning This product contains chemicals including lead kn
7. 02 kHz 75 Hz 8 1280 x 1024 63 98 kHz 60 Hz 9 1280 x 1024 79 976 kHz 75 Hz 10 1600 x 1200 75 kHz 60 Hz best screen resolution If you do not use the best mode for the monitor the display image may look slightly fuzzy 18 Power management Power management ENERGY STAR As an ENERGY STAR Partner Gateway has determined that this product meets the ENERGY STAR guidelines for energy efficiency This monitor complies with the EPA s International ENERGY STAR Program which is a program designed to encourage manufacturers of computer equipment to build circuitry into their products to reduce energy consumption during time of non use Energy declaration When connected to a computer that supports the VESA Display Power Management Signaling DPMS Protocol the monitor can conserve significant energy by reducing power consumption during periods of non use When your computer goes into the energy saving mode the monitor will then enter the Active Off mode different from total shut down In the Active Off mode the Power LED will still show amber Use these conventions and the power can be reduced to the following levels VESA State LED Indicator Power Consumption On Green lt 60 W Active Off Amber lt 3 W To wake the monitor when it is in Active Off mode move the mouse or press any keyboard key Access the power management options in the Control Panel to change the period of time after which the monitor enters
8. Gateway User Guide Gateway FPD 2020 Monitor Contents Using Your FPD 2020 Monitor 1 Connecting the 2 Starting the 7 Adjusting monitor settings 9 External controls vg 2 Heer ee ed cate ae 9 OSD OptionS opus est trc ee eto ete sant V S P Mfr us 11 Software controls 14 Video Todes nee an due xD peo Gaeta ate old bar Pre ea 18 Power management 19 ENERGY STAR art OU dct loe peo A b M e 19 Energy declaration ees 19 Maintenance isi ote re RES QR eh ee Shee ae We Hla ied 20 Troubleshooting eee teen 20 NO POWER e uL 20 No picture niece Resale 21 Display colors are wrong 22 Picture has shadows or ghosts 22 Color is not uniform 22 Image is not sized or centered correctly 23 The monitor has pixels that are always dark or too bright 23 Specifications u ee Ar ep Re de dee Pea et RE 24 Safety Regulatory and Legal Information 25 The FPD 2020 monitor is a high resolution color LCD
9. acement is justified based on the number of pixels affected 23 Using Your FPD 2020 Monitor Specifications Specifications are subject to change without notice or obligation Monitor 20 1 inch active matrix TFT Thin Film Transistor LCD Best screen resolution 1600 x 1200 Display colors Over 16 million colors Power input AC 100 240 V 50 60 Hz 1 2 A Power consumption Normal operation 60 W Active Off operation 3 W Dimensions 17 56 x 8 78 x 17 60 inches W x D x H 44 6 x 22 3 x 44 7 cm W x Dx H Power management Meets EPA ENERGY STAR and VESA DPMS requirements Certifications UL cUL EPA NOM and FCC Class B Many products for Gateway and its subsidiaries are custom engineered by our suppliers to Gateway specifications and may vary from similarly marketed products 24 Safety Regulatory and Legal Information Important safety information Your Gateway system is designed and tested to meet the latest standards for safety of information technology equipment However to ensure safe use of this product it is important that the safety instructions marked on the product and in the documentation are followed Warning Always follow these instructions to help guard against personal injury and damage to your Gateway system 25 Safety Regulatory and Legal Information Setting up your system 26 Read and follow all instructions marked on the product and in the documentation before you operate your system Reta
10. computers connected to the monitor MENU Press to view the OSD Press again to exit Arrows OSD active Press to select or adjust OSD options OSD inactive Press lt and gt to adjust the contrast Press A and V to adjust the brightness SELECT Press to make a selection in the OSD Power LED After the main power switch is on use this button to turn the monitor off and on For information about the main power button see Starting the monitor on page 7 OSD options gt To adjust the OSD settings Adjusting monitor settings 1 Press the MENU button The OSD menu opens 2 Usethe A and V buttons to highlight a control then press the SELECT button Use the lt gt A V buttons to adjust the control to the desired level 4 Press the SELECT button to return to the main navigation bar on the left of the OSD menu 5 When you have finished making all adjustments press the MENU button to exit the OSD OSD menus OSD Menu CONTRAST BRIGHTNESS www gateway com Description Brightness Press the A and V buttons to adjust the brightness of the screen Use the lowest brightness setting you are comfortable with to maximize the life of the monitor backlights You may need to readjust brightness after the monitor has warmed up Contrast Press the lt and gt buttons to adjust the contrast of the screen 11 Using Your FPD 2020 Monitor OSD Menu
11. environments or industrial facilities 27 Safety Regulatory and Legal Information Regulatory compliance statements United States of America Federal Communications Commission FCC Unintentional emitter per FCC Part 15 This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception However there is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to radio and television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a different circuit from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Compliance Accessories The accessories associated with this equipment are shielded video cable These accessories are required to be used in order to ensure compliance
12. g blue video port on the back of your computer T _ gg T E OR If your computer supports digital video then connect the digital video cable to the matching white video port on the back of your computer s www gateway com 5 Using Your FPD 2020 Monitor 8 Plug the power cord into a correctly grounded electrical outlet 6 www gateway com Starting the monitor Starting the monitor gt To start the monitor 1 Press the main power switch on the right side of monitor The power LED on the front of the monitor turns on Main power switch 3 amp Tricks After the main power switch is on use the power button on the front of the monitor to turn the monitor off and on You cannot use the front power button until the main power Switch is on 2 Turn on your computer www gateway com 7 Using Your FPD 2020 Monitor 3 After your computer is running the power LED on the monitor should be green Allow about 10 seconds for the display image to appear If the power LED is not green or you do not see a display image check the connections For more troubleshooting information see Troubleshooting on page 20 4 Adjust the tilt of the monitor for the best viewing angle 5 After you see the Windows desktop press the AUTO button to automatically adjust your display image to the ideal settings 6 Use the on screen display OSD to adjust other mon
13. in all safety and operating instructions for future use Do not use this product near water or a heat source such as a radiator Set up the system on a stable work surface The product should only be operated from the type of power source indicated on the rating label If your product has a voltage selector switch make sure that the switch is in the proper position for your area The voltage selector switch is set at the factory to the correct voltage Openings in the monitor case are provided for ventilation Do not block or cover these openings Make sure you provide adequate space at least 6 inches 15 cm around the system for ventilation when you set up your work area Never insert objects of any kind into the monitor ventilation openings Some products are equipped with a three wire power cord to make sure that the product is properly grounded when in use The plug on this cord will only fit into a grounding type outlet This is a safety feature If you are unable to insert the plug into an outlet contact an electrician to install the appropriate outlet If you use an extension cord with this system make sure that the total ampere rating on the products plugged into the extension cord does not exceed the extension cord ampere rating If your system is fitted with a TV Tuner cable or satellite receiver card make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and buildup
14. itor settings For more information see Adjusting monitor settings on page 9 Important When adjusting the monitor settings always press the AUTO button before entering the OSD This will automatically adjust the display image to the ideal settings F for the current screen resolution The best screen resolution is 1600 x 1200 c Adjusting monitor settings Adjusting monitor settings Use the external controls located on the monitor itself and software controls accessible in Windows to adjust the display image For more information about software controls see Software controls on page 14 External controls This monitor features an on screen display OSD that lets you adjust and save contrast brightness and other settings for the monitor The monitor saves changes you make to the settings even if you turn off the monitor me LI G G D 1 1 2 AUTO MENU SELECT button button button LIGHT VIEW SOURCE Arrow Power button button button buttons and LED Using Your FPD 2020 Monitor 10 LIGHT VIEW Press to select a preset viewing mode or customize one of your own Preset modes include optimized settings for text movies or photos in either day or night ambient light levels AUTO Press to automatically optimize the monitor s image position clock and phase SOURCE Press to view the source signal or switch between computers if you have two
15. lt and gt buttons to change the color intensity of the OSD menu Zoom Press SELECT to enter the Zoom submenu then press the lt gt buttons to zoom in and out within the screen display area After you zoom in the Horizontal and Vertical controls are active Use the 1 and gt buttons to move horizontally and vertically within the zoomed area OSD Position Press the 4 gt A V buttons to adjust the OSD window position on the screen 13 Using Your FPD 2020 Monitor Software controls Adjusting the color depth and screen resolution are two of the most basic monitor settings you may need to change Adjusting the color depth Color depth is the number of colors your video card uses Most images look best displayed with the maximum number of colors available Windows lets you choose from several color depth settings for the monitor We recommend that you use the 32 bit True Color setting or the highest setting available at all times If the color in your images seems false or jumpy especially after you have played a game or run a video intensive program check the color depth setting and return it to 32 bit True Color if necessary gt To change the color depth 14 1 In Windows XP click Start then click Control Panel The Control Panel window opens If your Control Panel is in Category View click Appearance and Themes OR In Windows 2000 click Start Settings then click Control
16. of static charges Important safety information Care during use Do not walk on the power cord or allow anything to rest on it Do not spill anything on the system The best way to avoid spills is to avoid eating and drinking near your system Do not expose the monitor to rain or use near water If the monitor does get exposed to moisture unplug it and allow it to dry for 24 hours Call Gateway Technical Support for advice on whether the monitor is safe to turn back on When the monitor is turned off a small amount of electrical current still flows through the monitor To avoid electrical shock always unplug all power cables and modem cables from the wall outlets before cleaning the system Unplug the system from the wall outlet and refer servicing to qualified personnel if The power cord or plug is damaged Liquid has been spilled into the system The system does not operate properly when the operating instructions are followed The system was dropped or the cabinet is damaged The system performance changes Warning To prevent electric shock never remove the cover No user serviceable parts inside Refer servicing to qualified service personnel Replacement parts and accessories Use only replacement parts and accessories recommended by Gateway Important Do not use Gateway products in areas classified as hazardous locations Such areas include patient care areas of medical and dental facilities oxygen laden
17. ontrol Panel window opens If your Control Panel is in Category View click Appearance and Themes OR In Windows 2000 click Start Settings then click Control Panel The Control Panel window opens 2 Click Double click the Display icon The Display Properties dialog box opens 3 Click the Settings tab Display Properties Display Gateway EV700 on Intel r 82810E Graphics Controller Color quality High 24 bit v 800 by 600 pixels Troubleshoot Advanced OK Cancel 16 www gateway com Adjusting monitor settings Drag the Screen resolution or Screen area slider to the size you prefer To save your changes in Windows XP click OK then click Yes OR To save your changes in Windows 2000 click OK then click OK again n Help and For more information about adjusting screen resolution in Support Windows XP click Start then click Help and Support Type the keyword changing screen resolution in the HelpSpot Search box search 5 then click the arrow 17 Using Your FPD 2020 Monitor Video modes The monitor supports several video modes m Best screen resolution is 1600 x 1200 The supported video modes are Screen Resolution Horizontal Vertical display mode Frequency Frequency 1 640 x 480 31 47 kHz 60 Hz 2 640 x 480 37 5 kHz 75 Hz 3 720 x 400 31 47 kHz 70 Hz 4 800 x 600 37 88 kHz 60 Hz 5 800 x 600 46 88 kHz 75 Hz 6 1024 x 768 48 36 kHz 60 Hz 7 1024 x 768 60
18. own to the State of California to cause cancer birth defects or reproductive harm 29 Safety Regulatory and Legal Information Notices Copyright 2004 Gateway Inc All Rights Reserved 14303 Gateway Place Poway CA 92064 USA All Rights Reserved This publication is protected by copyright and all rights are reserved No part of it may be reproduced or transmitted by any means or in any form without prior consent in writing from Gateway The information in this manual has been carefully checked and is believed to be accurate However changes are made periodically These changes are incorporated in newer publication editions Gateway may improve and or change products described in this publication at any time Due to continuing system improvements Gateway is not responsible for inaccurate information which may appear in this manual For the latest product updates consult the Gateway Web site at www gateway com In no event will Gateway be liable for direct indirect special exemplary incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages In the interest of continued product development Gateway reserves the right to make improvements in this manual and the products it describes at any time without notices or obligation Trademark Acknowledgments Gateway and the Black and White Spot Design are trademarks or registered trademarks of Gatewa
19. with Using Your FPD 2020 Monitor 1600 x 1200 maximum resolution Over 16 million colors Excellent contrast and legibility Space saving and lightweight design Reduced power usage Using Your FPD 2020 Monitor Connecting the monitor P To connect the monitor 1 Position your computer and the monitor so you can reach the connections on each 2 Lay the monitor on its back PAM 2 www gateway com Connecting the monitor 3 Connect the power cord to the power connector underneath the bottom of the screen www gateway com 3 Using Your FPD 2020 Monitor 4 1f your computer supports analog video blue video connector connect the analog video cable to the blue analog connector underneath the bottom of the screen OR If your computer supports digital video white video connector connect the digital video cable to the white DVI connector underneath the bottom of the screen Important Make sure that you only connect one video cable to the monitor and computer The only way to use both connections it to share the monitor between two computers Use the SOURCE button to change between computers For more information see Adjusting monitor settings on page 9 5 Return the monitor to its upright position 6 Make sure that your computer is turned off 4 www gateway com Connecting the monitor 7 If your computer supports analog video then connect the analog video cable to the matchin
20. y Inc in the U S and other countries SpotShop Spotshop com and Your Ware are trademarks of Gateway Inc Intel Intel Inside logo and Pentium are registered trademarks and MMX is a trademark of Intel Corporation Microsoft MS MS DOS and Windows are trademarks or registered trademarks of Microsoft Corporation All other product names mentioned herein are used for identification purposes only and may be the trademarks or registered trademarks of their respective companies 30 MAN MON FPD2020 USR GDE R2 2 04 8 27103 03143 0 8509849
Download Pdf Manuals
Related Search