FUNAI FDP-100 Photo Printer User Manual
Contents
1. The Paper tray is not set There is no paper in the Paper tray Specified paper is not set in the Paper tray Set the paper supplied with the Ink cartridge About the Ink cartridge e The Ink cartridge is not set The Ink ribbon in the Ink cartridge has been consumed The ERROR lamp flashes 37 38 Appendix Before Requesting Services If the printer is not responding properly check the following items before requesting services General printer problems The POWER lamp does not e The power cord or the AC adapter is not light on connected correctly Print fails e The Ink cartridge is not inserted with the correct orientation into the Ink cartridge slot firmly The Ink ribbon is slack The paper is not set Specified paper is not set The paper is set inside out The Ink ribbon in the Ink cartridge has been consumed e Images which are not supported by the printer are tried to be printed Exif JPEG images are supported by the printer e Condensation forms inside the printer Leave it for a while approx 1 2 hours It takes long time to print High resolution images are tried to be printed images It takes long time to read such images e The internal temperature of the printer is too high Wait for a while The printer will resume printing Images cannot be printed e Specified paper is not set clearly e The paper is not set correc2. Introduction 7 Connecting gt p 28 Connect to the printer Connect to the AC adapter oe To power A USB cable supplied outlet with the camera Plug the power cord Connect to the camera 4 Printing p 29 Turn on the camera Operate the camera to print images Printing method varies depending on the camera models Refer to the user s guide of the camera 14 Introduction Safety Precautions Before using the printer read the safety precautions and follow them or there may be fire electric shock injuries or malfunction e Do not disassemble or remodel the printer e Do not use the printer if the printer is dropped or the casing becomes damaged e Unplug the power cord immediately if the printer emits smoke or abnormal odor or shows other signs of significant malfunction e Do not place liquid containers such as glasses vases or flowerpots on the printer for preventing water or foreign objects from getting into the printer e Do not drop or insert foreign objects such as metallic or flammable objects e Do not touch the power plug during thunderstorms to avoid electric shock e Do not damage the power cord Unplug the power cord immediately if it becomes damaged and consult your dealer Do not handle the power cord in the following manner Pulls the power cord forcibly Binds up the power cord Conver
3. e The printer may temporarily stop operating due to ambient temperature or internal temperature of the printer It is not caused by malfunction The printer will resume normal printing when it cools down Halting a printing process temporarily is most likely to occur in the following cases When printing continuously When ambient temperature is excessively high When the air vents on the backside of the printer are blocked or ventilation is inadequate e Use the specified types of paper for the printer Set the paper in the Paper tray with the print side the glossy side facing upwards Fan a stack of paper to remove static cling and set the paper not to stick out of the Paper tray e Do not touch the print side of the paper with your fingers Keep the paper surface free from fingerprints flaws dust and oil spots etc or clear images may not be printed e Do not tear or bend the paper s perforated line before printing Such paper cannot be used e Do not bend or fold the paper e Up to 20 sheets of paper can be set in the Paper tray Do not set more than 20 sheets of the paper for preventing paper jam e Do not write characters and like that on the paper before printing It may cause malfunction e Do not reuse the paper that has already been printed It may cause malfunction Introduction e Do not touch the printed surface with adhesive tape rubber goods or plastic etc and do not leave the printed surface in conta
4. Use the USB cable for the computer e The printer driver is not installed on the computer Install the printer driver in the supplied CD ROM and then connect the printer with the computer e Another printer is selected for printing on the computer Select this printer and then print images 40 e Set the specified paper e Both a camera and a computer are connected to the printer Images cannot be printed from the computer if a camera is connected to the printer Disconnect the camera from the printer How to stop printing in e Clicking Print cancel on the computer can progress stop printing images Remove the paper in the following steps when the paper jam has occurred 1 Unplug the power cord from the power outlet 2 Plug the power cord after approx 10 seconds e The paper is discharged from the printer automatically e Do not remove the paper from the printer forcibly It may cause malfunction Appendix Faint stripes or spots may be printed on the image if internal part of the printer gets dusty Clear the printer out of dust or dirt in the following steps 1 Press up the Ink cartridge eject lever and remove the Ink cartridge gt p 24 2 Insert the supplied cleaner as indicated and move the cleaner in and out e Even if images cannot be printed clearly after cleaning internal part of the printer consult your dealer 41 42 Appendix Specifications Phot
5. FUNAI Photo Printer FDP 100 User s Guide Introduction Prepare Printing from the camera Printing from the computer appendix i PictBridge We would like to take this opportunity to thank you for purchasing this Photo Printer Please read this User s guide carefully and keep it for future reference Contents IMPORTANT SAFEGUARDS 0 ccc cccceeeecteesceesseeeeeessceesseeseesnseeseneeeseneees 4 Connection to Power For UK scccsscivicescecceetececccssccasceetuieesdbecrsicescoediers 8 INTRO GU CH ON A E T A E 9 Standard Accessories iieprsiirsivnnsn sinea da 9 Notice COPY IIGIS ecccaccyetscctdesocteitescaeterseccbeivvacersuccuessasteesseish shreytpeswtenieavedsreye 10 Trademar kS ssseess teec cseichenavacse5 suede vashitnssauzesbed seca eva sat ecedccessek veges 10 OUTS sxe atc erates cates AEE A dees ee meee ne anes ae eee erage seee ee 10 P Atle AE E A E NE AA 11 Flow of the Printer Operation s nsussnessnsnnereurennrnurennnnnrnnrnnrennnnnnrnnnnnnnnnren 12 Quick GUIdG es ii siciasicscccisccsndstseactesetndav cans ssstiteceascctdsecevacsdsestassexasevaseessasvcsssezescs 13 Safety Precautions c iiscccscisssccssrsectcsstcasssvcatscscensascscdcrsescssssnsstecastersetesensecdens WARNINGS ae CAUTIONS tatenssusnci ences ananinnien rider acacia E aimee Usage Handling Note ccccccssesseeescesscessceeeeceessessneeseeesseeseseeseseesseesenaenes 17 Location Notes c ceeee al
6. Handling Maintenance Notes ccccccceeeeeeeeeeeceeeeeneeeseeeeeseneeeess 17 Notesin PRIMING sessen o ea 18 Paper Paper Tray Notes seccdeccoscsnscncesicnassevgye ra anant as 18 Prints NOTOS cceccsccvsecncascceccversicuesecitcesccasdeceusivssincabecendyatnndectendcncaedasses 19 Ink Cartridge Not S isnin anaa 19 Condensation Notes 2 sicsceccicaseeteicssdvccsosncsetscseeteceenttessessnesscoaranecte 19 Controls and COMPONentS ccccesceseeesseeseeeeseeeeeeeeseesseeessessseeeseeseseeeseees 20 Paper Ink Cartridge ccccceeeeeseceeesceeseessceeseeesseeesceeeseeeeseessoeseeeennneeneeenees 22 Set the Ink Cartridge in the Printer ccsseceseseeeeesseeeeeseeeeeeeeeeeeseeeeenees 23 How to Eject the Ink Cartridge ssrin 24 Set the Paper in the Paper Tray cccccssccssesesssessseeesesssesnssesesenseesesnees 25 Set the Paper Tray in the Printer cccccccsseeeeesseeeeeseeeeeeeeeeeeeeeeenseeeeeeeaee 26 Turning on the Power COnmecting ccesscscseeseseeeeesseeseeeeeeeeesseneeeeenees 27 Contents Printing from the Camera PictBridge Printing sssessseeeeeeeees 28 Connecting to the Came a iis cccctsevcetscscesssessnecsteedsstessiegsnasenrsesetnaensaes 28 Printing from the Camera cccoscesecncesceessenseneesecnesnenavensneneoncemereentenees 29 System Requirements Windows IMAGIMOS Misici vesszeeves cub vcavd dun cb tig cvs arae ra e era A AEE Installing the Prin
7. Mismatch between printed Paper in the Paper tray or the Ink cartridge data and loaded paper does not match the printing data Use the be i 22 specified paper or Ink cartridge for the printing data No ribbon cartridge The printer has no Ink cartridge Insert the Ink cartridge all the way in the Ink cartridge 23 slot until it clicks No paper cartridge The printer has no Paper tray Insert the i 26 Paper tray into the printer firmly Paper stack Paper jam has occurred Turn off the printer and turn on again so the paper is discharged 40 from the printer Wrong paper tray paper Specified paper is not set Set the specified 22 paper into the Paper tray Marker detect error Remove the Ink cartridge and take up the A 23 slack Then insert it again Appendix Other paper errors e More than 2 sheets of paper are sent inside of the printer at a time as the paper sticks together and like that Turn off the printer and turn on again so the paper is discharged from the printer e Paper jam has occurred Turn off the printer and turn on again so the paper is discharged from the printer File error e The printer failed to get DPOF setting information Check if the DPOF settings are correctly configured e An image that is not supported by the printer is tried to be printed The ERROR lamp lighting indicates the following probable causes POWER ACCESS ERROR About the paper Paper jam has occurred
8. are on the original CD ROM and on the medium of a back up copy made pursuant to Section 1 above if any 2 You shall not use copy or transfer the Software except as expressly granted or permitted herein and shall not assign sublicense sell rent lease loan or convey to any third party the Software and you also shall not have any third party to do so 3 You shall not alter translate modify convert to other programming languages disassemble decompile or otherwise attempt to discover the source code of the Software and you also shall not have any third party to do so 4 LIMITED WARRANTY AND DISCLAIMER OF INDEMNITY You acknowledge and agree that the use of the Software is at your own risk THE SOFTWARE IS PROVIDED AS IS AND WITHOUT ANY WARRANTY OF ANY KIND FUNAI FUNAI S SUBSIDIARIES AND AFFILIATES THEIR DISTRIBUTORS AND DEALERS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE FUNAI FUNAI S SUBSIDIARIES AND AFFILIATES THEIR DISTRIBUTORS AND DEALERS MAKE NO WARRANTIES EXPRESS OR IMPLIED AS TO NON INFRINGEMENT MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE FUNAI FUNAI s subsidiaries and affiliates their distributors and dealers do not warrant that the functions contained in the Software will meet your requirements or that the operation of the 43 44 Appendix Software will be uninterrupted or error free However FUNAI or FUNAI s subsidiary warrants a medium on which th
9. bookshelves or into the closet Do not install the printer on the carpet or mattress Do not cover the printer with table cloth and like that e Unplug the power cord before cleaning or maintenance e Do not remove the Paper tray during printing e Do not use the printer near open flames Introduction Usage Handling Note e Do not install the printer in humid or dusty places e Leave approx 20 cm of clearance at the front back side of the printer Make sure to leave clearance around the paper handling slot so that paper has room enough to jut out from the slot during printing Do not let the cables get tangled around the paper handling slot e Do not install the printer near strong magnets or devices that produce strong electromagnetic fields Electromagnetic radiation from devices such as TVs mobile phones and speakers may cause distortion in printed images e Do not install the printer vertically e Unplug the power cord from the power outlet when the printer is not in use Note that you should plug in and operate the printer at least once every 6 months to ensure the printer remains functional When the printer is not in use for extended period eject the Ink cartridge and the Paper tray from the printer Paper may deteriorate due to dust or damp Remove the unused paper from the Paper tray put it into the original bag and store the bag horizontally Use the supplied cleaner before printing if the printer has not been
10. the cable is connected to the printer e is written in the manual of cameras compatible with PictBridge standards and is displayed on the LCD monitor of some camera models when connecting to the printer When disconnecting the cable follow the user s guide of the camera 28 Printing from the Camera Perform the printing operation from the camera e Printing operation is performed viewing the LCD monitor of the camera e The operation method varies depending on the camera specification Refer to the user s guide of the camera The printer starts printing e The paper is moved forward and backward several times and the printed paper exits on the top cover of the Paper tray That is the end of printing process e Do not disconnect the cable while printing About print settings Some items cannot be selected depending on the camera models In that case images are printed as follows the default settings of the printer Paper size Images are printed in accordance with the size of paper set in the Paper tray Layout specification Images are printed with Borderless Date Date is not printed Date is printed if it is set to ON in the camera e When the error occurs while printing the error message is displayed on the LCD monitor of the camera p 36 e Standard Setting or Follow the Printer Setting may be selectable in some camera models When selecting them images are printed with
11. the default settings above e When printing from the camera you are recommended to use a domestic power supply as the power source of the camera 29 Printing from the Computer System Requirements Please install the printer driver on a computer meeting the following minimum requirements Windows XP Including Service Pack 1 and Service Pack 2 Windows 2000 Service Pack 4 The above OS should be pre installed on computers with a built in USB port Pentium 500 MHz or higher processor 256 MB or more USB 500 MB or more 1 024 x 768 pixels High color 16bit or better Mac OS X v10 2 v10 3 The above OS should be pre installed on computers with a built in USB port PowerPC G3 G4 G5 256 MB or more USB 500 MB or more 1 024 x 768 pixels 32 000 colors or better A CD ROM drive is required to install the printer driver Itis not necessarily guaranteed that the printer driver functions in all the computer which meets the system requirements 30 Printing from the Computer Installing the Printer Driver The CD ROM contains the printer driver required for printing from your computer Install the printer driver according to the following steps e Be sure to install the printer driver before connecting the printer with the computer During the installation if the message says that the printer should be connected to the computer follow the message e Be sure to log on with administrator privilege
12. the paper from this slot during printing Do not touch the protruding paper DC IN Terminal Connects the AC adapter to supply the power Introduction USB Port Connects the USB cable sold separately to this port for using the printer with a computer PictBridge Port Connects the USB cable supplied with the camera to this port for using the printer with a PictBridge compliant camera 21 22 Introduction Paper Ink cartridge Use the following paper Use the Ink cartridge included in the print set Postcard size paper 100 x 148 mm Print set FCP 40P Postcard size paper 40 sheets Ink cartridge for 40 prints Do not disassemble the Ink cartridge Q Do not open the print set paper Ink cartridge until you use it Prepare ease use the specified paper and Ink cartridge Set the Ink Cartridge in the Printer 1 Confirm that there is no slack in the Ink cartridge Ink ribbon e Ifthe Ink ribbon is slack turn to the direction of the arrow pressing in until the Ink ribbon is strained You cannot print allotted sheets of paper in the print set if you turn around too much 2 Open the Ink cartridge compartment door 7 Insert the Ink cartridge all the way into the Ink cartridge slot until it clicks e Confirm that the direction of the Ink cartridge is correct before inserting it 4 Close the Ink cartridge compartment door 23 2 Press up the Ink cart
13. your personal entertainment only Under copyright laws other materials cannot be used without obtaining permission from the holders of the copyrights e Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and or other countries e Macintosh and Mac OS are either registered trademarks or trademarks of Apple Computer Inc in the United States and or other countries e Adobe is registered trademark or trademark of Adobe Systems Incorporated in the United States and or other countries e Adobe Reader and Adobe Photoshop Album Starter Edition are free version of Adobe products e Other names and products mentioned in this User s guide may be registered trademarks or trademarks of their respective companies This mark denotes precautions or issues that may affect the operation or maintenance of the printer This mark denotes supplementary information or tips in use Introduction Direct print Images in the camera which is compatible with PictBridge standard can be printed easily by connecting with the printer Printing from your computer Images can be printed from your computer Windows Macintosh Multiple image print 2 4 9 16 split Same images can be printed on one sheet of paper Index print Images in the camera are printed as view format 42 images can be printed on one sheet of paper Image correction Brightness contrast and color satura
14. 8 Accessories Do not place this unit on an unstable cart stand tripod bracket or table The unit may fall causing serious injury to a child or adult and serious damage to the appliance Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the unit Any mounting of the appliance should follow the manufacturer s instructions and should use a mounting accessory AER UE recommended by the manufacturer Sa aty RETA 9 Cart An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn 53125A IMPORTANT SAFEGUARDS 10 Ventilation Slots and openings in the cabinet are provided for ventilation To ensure reliable operation of the unit and to protect it from overheating these openings must not be blocked or covered The openings should never be blocked by placing the unit on a bed sofa rug or other similar surface This unit should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 11 Power Sources This unit should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company 12 Power supply cords Do not use power supply cords other than the p
15. MOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the unit s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance IMPORTANT SAFEGUARDS 1 Read Instructions All the safety and operating instructions should be read before the appliance is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to Follow Instructions All operating and use instructions should be followed 5 Cleaning Unplug this unit from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 6 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards 7 Water and Moisture Do not use this unit near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like
16. THE CD ROM IN THIS BOX This document is a legal agreement Agreement between you and FUNAI ELECTRIC CO LTD FUNAI and governing your use of the software stored in the CD ROM and the user manual in this box including without limitation sound data and image data correctively the Software BY USING THE SOFTWARE YOU ARE DEEMED TO HAVE AGREED TO THE TERMS OF THIS AGREEMENT IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT DO NOT USE THE SOFTWARE AND RETURN IT TO FUNAI FOR A REFUND 1 GRANT OF LICENSE FUNAI grants you a personal nonexclusive limited license to install and use the Software You may also make copies of the Software as necessary for backup and archival purposes The term Software shall include the software components media all copies made by you and any upgrades modified versions updates additions and copies of the Software licensed to you by FUNAI or its subsidiaries 2 OWNERSHIP In all respects the title ownership and intellectual property rights in and to the Software shall remain FUNAI and or its subsidiaries You own only the CD ROM media in which the Software is stored Except as expressly provided herein no license or right express or implied is hereby conveyed or granted by FUNAI to you for any intellectual property of FUNAI 3 RESTRICTIONS 1 You may not modify remove or delete any and all copyright notices i which are contained in the Software including any copy thereof and ii which
17. TO YOU DISCLAIMER OF INDEMNITY FUNAI FUNAI S SUBSIDIARIES AND AFFILIATES THEIR DISTRIBUTORS AND DEALERS SHALL ASSUME NO OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY 6 EXPORT RESTRICTIONS You agree to comply with all export laws and restrictions and regulations of the country involved and not to export or re export directly or indirectly the Software in violation of any such laws and restrictions and regulations or without all necessary approvals 7 US GOVERNMENT RESTRICTED RIGHTS This Software and the documentation are provided with RESTRICTED RIGHTS applicable to private and public licenses alike Without limiting the foregoing use duplication or disclosure by the U S Government is subject to restrictions as set forth in this EULA and as provided in DFARS 227 7202 1 a and 227 7202 3 a 1995 DFARS 252 227 7013 c 1 ii OCT 1988 FAR 12 212 a 1995 FAR 52 227 19 or FAR 52 227 14 as applicable 8 TERM This Agreement is effective upon your acceptance hereof by using the Software and remains in effect until terminated Use shall mean when the Software is loaded on a temporary memory of your PC such as RAM or installed in a fixed memory hard disc and other memory devices You may terminate this Agreement with a 30 days prior written notice or by destroying the Software including any an
18. ct with other objects It may cause color loss change of color or color transfer e Select albums with nylon based sleeves polypropylene sleeves or cellophane sleeves for storing prints Other type of sleeves may cause color loss or change of color e To avoid print quality deterioration do not store prints under the following conditions Locations exposed to direct sunlight High temperatures above 40 C High humidity Dust laden environment e Even if prints are stored avoiding the conditions above change of color or print quality deterioration may occur e Use the specified Ink cartridge for the printer e Do not touch the Ink ribbon or pull it out from the Ink cartridge The allotted number of sheets of paper may not be printed e Rotate the screw hole of the Ink cartridge in the direction of the arrow with the screw hole pressed to remove slack of the Ink ribbon and then insert the Ink cartridge e Confirm the direction of the Ink cartridge and insert all the way into the Ink cartridge slot e Do not reuse the Ink cartridge that has already been consumed e If condensation forms inside the printer stop using the printer and leave it at ordinary temperatures until the water droplets have evaporated completely Water droplets will form on the windows of the warm room These droplets are called condensation They can form on the printer the Ink cartridge the Paper tray and the paper when transporting these items from co
19. d all copies thereof This Agreement shall also terminate if you fail to comply with any terms of this Agreement In the event that this Agreement terminates for your failure to comply with this Agreement in addition to FUNAI enforcing its respective legal rights you must promptly destroy the Software including any and all copies thereof Notwithstanding the foregoing Sections 2 4 5 6 7 8 9 and 10 shall survive any termination of this Agreement Appendix 9 SEVERABILITY In the event that any of the provisions of this Agreement proves to be invalid or illegal that will not in no way affect impair or invalidate any other provision and all other provisions of this Agreement will be in full force and effect 10 GOVERNING LAW The terms and conditions of this Agreement are governed by the laws of Japan Any litigation arising from the interpretation or execution of this license shall be submitted to Osaka District Court 2005 2006 FUNAI EUROPE GMBH All rights reserved JA321EA kK 45
20. e CD ROM on which the Software is stored to be free of material or manufacturing defects under normal use and operating conditions for a period of ninety 90 days from the date of you obtained the same as evidenced by a receipt or otherwise CUSTOMER REMEDIES FUNAI FUNAI s subsidiaries and affiliates their distributors and dealers entire liability and your exclusive remedy shall be the replacement of the medium not meeting the LIMITED WARRANTY The LIMITED WARRANTY does not apply if failure of the medium has resulted from accident abuse or misapplication of the Software and shall not extend to anyone other than the original user of the Software 5 NO LIABILITY FOR DAMAGES IN NO EVENT SHALL FUNAI FUNAI S SUBSIDIARIES AND AFFILIATES THEIR DISTRIBUTORS AND DEALERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING WITHOUT LIMITATION LOSS OF BUSINESS PROFITS LOSS OF DATA LOSS OF BUSINESS INFORMATION LOSS OF BUSINESS INTERRUPTION OR OTHER COMPENSATORY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE SOFTWARE USE THEREOF OR INABILITY TO USE THE SOFTWARE EVEN IF FUNAI FUNAI S SUBSIDIARIES OR AFFILIATES THEIR DISTRIBUTORS OR DEALERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES SOME STATES OR LEGAL JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE ON THE PART OF SELLER SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
21. ea e Do not place any obstacles within 20 cm of the front back side of the printer Paper moves in and out to from the slot during printing 2 Connect the power cord to the AC adapter ay 7 Connect the AC adapter to the DC IN terminal of the printer To power outlet 4 Plug the power cord connected to the AC adapter into a power outlet e The printer turns on and the POWER lamp lights How to turn off the power Disconnect the power cord from the power outlet so the POWER lamp goes out and turn off the power 27 Printing from the Camera Printing from the Camera PictBridge Printing Connecting the camera with the printer you can print images directly by the operation of the camera e Images can be printed directly with the camera which is compatible with PictBridge standard e t may be necessary to switch the camera to the PictBridge mode before connecting to the printer Configure the setting of the camera according to the user s guide of the camera Set the paper and the Ink cartridge p 23 26 1 Connect the printer to the camera Connect the AC adapter p 27 we To power fiA outlet Use the USB cable supplied with the camera Turn the camera s power on e The ACCESS lamp lights e Images can be printed by operating the camera e For the details refer to the user s guide of the camera e Some camera models automatically turn the power on when
22. er s perforated line is torn or bent that paper cannot be used for printing Problems in printing from the camera Print fails The printer is not connected with the camera correctly Use the USB cable supplied with the camera 28 Your camera does not support PictBridge printing 28 It may be necessary to switch the camera to the PictBridge mode before connecting to the printer 28 Printing operation is required from the camera Refer to the user s guide of the camera 29 How to stop printing in progress Stop printing by operation of the camera Index print or multiple image print function cannot be used If the camera does not have such functions as Index print or multiple image print these functions cannot be used on the printer Some images are not printed in the index prints Images not supported by the printer are not printed Parts of these images remains blank 39 Appendix More than 2 sheets of paper e Ifthe DPOF settings are configured on the are printed camera all of the DPOF setting images are printed e The number of paper specified on the camera is printed Prints has no shooting date e Shooting date time can be printed only if the date print function of the camera is activated Problems in printing from the computer Print fails e The printer is not connected with the computer correctly
23. f your electricity supply is the same as that indicated on the rating plate Mains Cord Do not make any connection to the larger pin marked with the letter E or by the symbol This appliance may be fitted with a non or coloured green or green and yellow rewireable plug If it is necessary to change the fuse in a nonrewireable plug the fuse cover must be refitted If the fuse cover is lost or damaged the plug must not be used until a replacement available from the appliance manufacturer is obtained It is important that the colour of the CORD GRIP replacement fuse cover corresponds with the OUTER SHEATH OF THE WIRE rating marking on the base of the plug If the plug has to be changed because it is not suitable for your socket or becomes damaged it should be cut off and an appropriate plug fitted following the wiring instructions below The plug removed must be disposed of safely as insertion into a 13A socket is likely to cause an electrical hazard For your own safety read the following instructions carefully before attempting to connect this unit to mains The wires in this mains lead are coloured in accordance with the following code BLUE Neutral BLUE NEUTRAL BROWN LIVE Important As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured blue must be c
24. layed p 36 e Depending on dimensions of an image the whole image may not be printed Not printed Image gt gt Uninstalling the Printer Driver 1 Place the CD ROM disc in the CD ROM drive 2 Click Uninstall of the Printer Driver 2 Follow the screen messages to proceed 1 Click Applications Utilities folder and double click Printer Setup Utility Printer Center icon a Select FDP 100 and click Delete 35 36 endix If Errors have Occurred When connecting with a camera If an error such as print error has been detected when connecting with a camera the error message is displayed on the LCD monitor of the camera e The following is an example of error messages e Error messages vary in some measure by the camera models Some cameras may have no error messages displayed on the LCD monitor When connecting with a computer If an error such as print error has been detected when connecting with a computer the error message is displayed on the computer monitor No paper e The printer has no paper in the Paper tray Set paper in the Paper tray Wrong paper ribbon Specified paper or Ink ribbon is not set Check that the specified paper and Ink 22 26 cartridge are set The ribbon cartridge is The Ink ribbon in the Ink cartridge has been 23 depleted consumed Insert a new Ink cartridge
25. ld place to warm place e If condensation forms on the Ink cartridge the Paper tray or the paper wipe off the water droplets and allow to reach to room temperature before use e When transporting the printer including the Ink cartridge the Paper tray and the paper from cold place to warm place seal them into a plastic bag to avoid condensation Then allow to reach to ambient temperature before use 19 Introduction Controls and Components Printer Front view POWER ACCESS ERROR Printer Back view 20 1 POWER Lamp Lights up when the printer is plugged to the power outlet Connect the printer to the AC adapter supplied and connect the AC adapter to the power outlet 2 ACCESS Lamp Lights up when the printer is connected to the computer camera ERROR Lamp Lights up if an error such as paper out has been detected Paper Tray Slot Inserts the Paper tray into this slot Paper Tray Compartment Door Opens this door when inserting the Paper tray Close it when the printer is not in use Ink Cartridge Slot Inserts the Ink cartridge into this slot Ink Cartridge Eject Lever Presses up the lever to remove the Ink cartridge Ink Cartridge Compartment Door Opens this door to insert remove the Ink cartridge Close it when using the printer Air Vent Prevents the printer from rising its internal temperature excessively Paper handling Slot Protrudes
26. not handle the power cord with wet hands Do not pull the power cord when disconnecting it from AC wall outlet Grasp it by the plug If by accident liquid is spilled on this unit unplug the power cord immediately and take the unit to our Authorized Service Center for servicing Do not put your fingers or objects into the unit other than those specified in the operating instructions FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed or used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one o
27. nsive work by a qualified technician to restore the unit to its normal operation e If the unit has been dropped or damaged in any way f When the unit exhibits a distinct change in performance this indicates a need for service 18 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 19 Safety Check Upon completion of any service or repairs to this unit ask the service technician to perform safety checks to determine that the unit is in proper operating condition 20 Heat This unit should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat IMPORTANT SAFEGUARDS For safety and optimum performance of this unit Do not install the unit vertically Install the unit in a horizontal and stable position Do not place anything directly on top of the unit Shield the unit from direct sunlight and keep the unit away from sources of intense heat Avoid dusty or humid places Use the unit at temperatures of 10 C 35 C Avoid places with insufficient ventilation for proper heat dissipation Do not block the ventilation holes on the back of the unit Avoid locations subject to strong vibration or strong magnetic fields Do
28. o printer Power source 24 V 2 5 A Power consumption approx 60 W Operating temperature 10 C 35 C Operating humidity 20 80 Dimensions 183 5 W x 71 0 H x 144 5 D mm including protruding parts Weight approx 965 g not including Ink cartridge Paper tray Printing system Dye sublimation thermal transfer with overcoating Maximum number of printing pixels 300 x 300 dpi Gradation 256 gradations color Image format DPOF compatible Exif Ver 2 1 2 2 JPEG 4 4 4 4 2 2 4 2 0 Paper Postcard size 100 x 148 mm 100 x 177 mm before cutting out Ink Dedicated Ink cartridge Y M C overcoating Print size Postcard size 100 x 148 mm without borders 91 4 x 121 3 mm with borders Print speed Postcard size approx 78 sec Print mode Full image print with without borders Multiple image print Index print Signal transfer method PictBridge with camera Connection method USB full speed AC adapter UADPDCAATE02 Input Voltage 100 240 V g 1 5 A 47 63 Hz Rated Output 24 V 2 5 A Power consumption 120 165 VA Operating temperature 10 C 35 C Operating humidity 20 80 Dimensions 120 W x 38 H x 60 D mm Weight approx 350 g Appendix FUNAI SOFTWARE LICENSE AGREEMENT PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE STORED IN
29. onnected to the terminal which is marked with the letter N or coloured black The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red No connection is to be made to the earth terminal of the plug If a 13 Amp BS 1363 Plug is used a 3 Amp Fuse must be fitted or if any other type of Plug is used a 3 or 5 Amp Fuse must be fitted either in the Plug or Adaptor or on the Distribution Board Mains Supply 220 240 V 50 Hz AC only oduction lease read the FUNAI SOFTWARE LICENSE AGREEMENT described on page 43 in this User s guide carefully Introduction Please check and make sure that you have all items listed below Ink cartridge Paper set for 5 prints Cleaner AC adapter Power cord CD ROM UADPDCAATE02 Printer driver Application software Quick Start Guide User s guide Refer to optional accessories Paper Ink cartridge on page 22 e In this User s guide camera refers to digital devices such as digital cameras or digital video cameras which are compatible with PictBridge standard e No person shall duplicate photocopy or reproduce any part of the User s guide All information included herein is subject to change without notice e We shall not be responsible for any loss damages direct or indirect arising from or related to improper use of this product 10 Introduction e Whatever you have printed can be used for
30. ower cord and the AC adapter supplied with this unit 13 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the appliance 14 Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock 15 Object and Liquid Entry Never push objects of any kind into this unit through any openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the unit 16 Servicing Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 17 Damage Requiring Service Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the unit c If the unit has been exposed to rain or water d If the unit does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require exte
31. r more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Canadian DOC statement DOC Class B Compliance This Class B digital apparatus complies with Canadian ICES 003 IMPORTANT SAFEGUARDS Please read this User s guide carefully before using your photo printer and keep it for future reference This unit is intended for household use only For Customer Use Read carefully the information located at the back of this unit and enter the Numbers below Retain this information for future reference Model No Serial No We declare under our sole responsibility that this product to which this declaration relates is in conformity with the following standards EN60950 1 EN55022 EN55024 EN61000 3 2 and EN61000 3 3 Following the provisions of 73 23 EEC 89 336 EEC and 93 68 EEC Directive This product and the accessories packed together are the applicable product to the WEEE directive This product s packaging materials are recyclable and can be reused Please dispose of any materials in accordance with your local recycling regulations When discarding the unit comply with your local rules or regulations SS Before Switching on make sure that the voltage o
32. ridge eject 24 Prepare 1 Open the Ink cartridge compartment door lever e The Ink cartridge is flipped out of the Ink cartridge slot 7 Pull out the Ink cartridge horizontally 4 Close the Ink cartridge compartment door e Never reuse the Ink cartridge that has been already consumed It may cause malfunction Q e Do not touch the Ink ribbon or pull it out of the Ink cartridge e Exchange a new Ink cartridge if it has worn out Prepare Set the Paper in the Paper Tray Do not use the paper other than the specified paper 1 Slide the top cover of the Paper tray to the direction of the arrow a Open the top cover 7 Set the paper in the Paper tray with the print side glossy side facing upwards e Do not set more than 20 sheets of the paper in the Paper tray e Do not have the paper stuck out of the Paper tray e Do not touch the print side of the paper gt p 18 e Do not tear or bend the paper s perforated line before printing p 18 4 Close the top cover 25 26 Prepare Set the Paper Tray in the Printer 1 Slide the top cover of the Paper tray to the direction of the arrow 2 Open the Paper tray compartment door 7 Insert the Paper tray horizontally into the Paper tray slot How to reject the Paper Tray Pull the Paper Tray out horizontally and close the Paper tray compartment door Prepare Turning on the Power Connecting 1 Place the printer on a flat ar
33. s computer system administrator when installing the printer driver al Close any programs that are running 9 Place the CD ROM disc in the CD ROM drive Printer Driver mee PhotoShop Album Starter Edition install Adobe Reader jae e The pop up menu appears automatically If the pop up menu does not automatically appear display the pop up menu in the following steps For Windows XP click the start button and select My computer then double click the CD ROM icon in the next windows For Windows 2000 double click the My computer icon on the desktop screen and double click the CD ROM icon in the next window User s Guide BEEE Close 7 Click Install of the Printer Driver e The install starts 4 Follow the screen messages to proceed 31 32 Printing from the Computer O1 gt WI wd Fr When installing on Mac OS X 10 2 be sure to connect the printer with the computer by the USB cable commercial item and turn on the printer before installing the printer driver When installing on Mac OS X 10 3 install the printer driver and then connect the printer with the computer by the USB cable commercial item and turn on the printer Be sure to log on with administrator privileges when installing the printer driver And enter password if it is required Close any programs that are running Place the CD ROM disc in the CD ROM drive Select Mac folder in the CD ROM di
34. sc and double click FunaiFDP100 dmg Double click FunaiFDP100 pkg Follow the screen messages to proceed depending on the application used for printing For details refer to Mac folder in the CD e When printing on MacOS X 10 2 additional packages may be required to install ROM Printing from the Computer Connecting the Printer to a Computer Connects the printer to the computer by the USB cable A B type commercial item Confirm that a camera is not connected with the printer before connecting it to the computer 1 Connect one end of the USB cable commercial item to the USB port on the printer and the other end to a USB port on your computer USB cable commercial item oe To power A outlet e When connecting the printer to your computer make sure that the connectors on the ends of the USB cable match the ports on the printer and on your computer For the location and the terminal form of the USB port on your computer refer to the user s guide of your computer 2 Confirm that the ACCESS lamp lights e Connect the printer directly to the USB port of your computer with the USB cable Do not connect to the USB port on the USB keyboard e When connecting the printer do not use other USB devices with the exception of a USB mouse or USB keyboard The printer may not function properly 33 Printing from the Computer Printing from the Computer Display Selec
35. t an image to be printed on your application d Display the print screen and set the printer name to FUNAI FDP 2 100 FDP 100 Mac OS e Printing and printer selection methods varies depending on the application Refer to the user s guide of your application Display the details screen Set Print direction Layout specification and No of copies D 4 34 e The same images are printed on one sheet of paper by the specified number of splits e Split specification cannot be selected when selecting Borderless e Selectable split number is as follows 2 split 4 split 9 split 16 split Click Image processing setting and drag the to manipulate an image Brightness Adjust brightness When sliding it to the strong side the image becomes distinct and when sliding it to the weak side a middle tone increases and the image lacks depth in color Saturation When sliding it to the increase side the dull image becomes vivid Click OK e The print screen is displayed Printing from the Computer Start printing e The status monitor is displayed while printing and the information such as file name and printing status are displayed on the status monitor e Refer to Error Messages if error messages are disp
36. ter Driver Windows eee LW Fe eal 0 C0 o Pasar renner eestor t rerecrre terre N E E N Connecting the Printer to a COMputel c ccs ees eee sete eeeeeeseeeennenseeneeeeee 33 Printing from the Computer ssssssessnssensresrnnrnnnrnnrnnrnnnrnnrnnrennrnnnnnnnnnnnnn nnn 34 Uninstalling the Printer Driver s sssesesressensenssnernernnrrnnrnurnnnrnnrennrnnrnennne 35 WINDOWS iesst issn appa aeaieo a asennad 35 MACINOS hisssides aa ae a S i 35 If Errors have OCCUIrred cccsscsseesesseessseeeseeseeseceessseesseeseneeseunesseeeseenees 36 Error Messages ERROR Lamp Before Requesting Services ccccccecsssscseseeeenseeeesseeseeesseesseeesenenseeseseenees 38 TROUDIGSHOOUIN nssr 38 lf Paper Jam has OCCUITEG cccecscccseccececsaecececssdnecsicecivsdeesaseinsiencecees 40 USing the Clean Ds icsccscricers cscectssdrneerceteia tes teatinetnecocrintadeateneseesvrecie 41 Specifications cceccesecessesseeseseessseeeseseseseseeseseessnessseesseeseeeseseesesesseesasanes 42 Main SPOCIICATIONS ics ctcccisis cdeceeascceticessacossscgencaveesesessscecccvevavensseevieas 42 FUNAI SOFTWARE LICENSE AGREEMENT FUNAI SOFTWARE LICENSE AGREEMENT IMPORTANT SAFEGUARDS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT RE
37. tion of the images can be adjusted to print from the computer DPOF print Only the images specified with DPOF settings on the camera can be printed automatically Date print Images can be printed with shooting date Some functions cannot be used depending on the type of camera 11 Introduction Flow of the Printer Operation You can print in the following order For actual operating refer to the page indicated below Insert the Ink cartridge p 23 Computer na ikc printing Plug the power cord gt p 27 4 Connect the camera with the printer p 28 4 Print images from the Install the printer driver gt p 31 Plug the power cord gt p 27 4 Connect the computer with the printer gt p 33 4 Print images from the computer p 34 camera gt p 29 Introduction Quick Guide Let s try to print images by connecting the printer with the camera Refer to the pages below for the details 1 Inserting the Ink cartridge p 23 Make sure there is no slack in the Ink Open the Ink cartridge Closethe compartment door cover Insert the Ink cartridge until it clicks 2 Setting the paper p 25 26 Open the Paper tray compartment door i Insert the Paper lt tray with the top SV Close the top cover slid Set the paper in the cover Paper tray with the print side glossy side facing upwards Paper tay 13
38. tly e The Ink ribbon or paper is dirty Insert the clean Ink cartridge or paper e Internal part of the printer gets dusty Clean it with the supplied cleaner The printed images are e The printer is installed near a TV a video distorted game or other devices that radiate electromagnetic waves Keep the printer off these devices while printing e The printer is installed near a stereo speaker large monitor or other devices that generate a strong magnetic field Keep the printer off these devices while printing Appendix Paper jams occur frequently More than 20 sheets of paper are set in the Paper tray Up to 20 sheets of paper can be set 25 The paper creases or warps Use the flat paper Too many sheets of paper are accumulated on the print output receptacle on top of the Paper tray Do not allow more than 10 sheets of printed paper to be accumulated The full picture is printed with upper lower parts of the image cutting off Depending on dimensions of an image the whole image may not be printed 35 The allotted number of sheets in the print set cannot be printed Turning on and off needlessly may cause the printer to miss printing the allotted number of sheets When turning on the printer the Ink ribbon is winded a bit for initialization Pulling the Ink ribbon out may cause the printer to miss printing the allotted number of sheets If the pap
39. ts the power cord Bends or twists the power cord excessively Heats the power cord Rests heavy objects on the power cord Do not operate the printer outside of the specified voltage rating Do not handle the power cord with the wet hands Do not use the AC adapter or the power cord other than those specified Do not use the AC adapter or the power cord supplied with the printer for other products Do not install the printer on an unstable or tilted table e Do not let the printer get wet e Do not plug too many leads into a single socket 15 16 Introduction Do not install the printer in the following places Smoky or dusty places Places subject to direct sunlight Steamy places Places close to heating equipment Places subject to high temperature such as sun heated cars Do not place heavy objects on the printer Do not get on top of the printer Unplug the power cord of the printer when the printer is not in use Do not move the printer while being plugged in Remove dust or other foreign matters adhering to the power plug periodically Confirm that the power cord is plugged into the power outlet firmly Do not plug unplug the power cord with the wet hands Do not block the air vents on the printer Do not reach into internal parts of the printer other than those specified in the User s guide Do not install the printer in narrow or ill ventilated places Do not install the printer on the
40. used for extended period p 41 e When using insecticides or other volatile solvents in the vicinity of the printer keep the printer off these solvents Do not allow rubber or vinyl materials to remain touched with the printer for a long time These materials may cause deformation of the printer s casing e To clean the printer wipe up any dust with a soft and dry cloth If the printer is heavily dirty soak the cloth in mild kitchen detergent diluted with water and wipe off the dust with the cloth and wipe again with dry cloth Do not use solvents such as benzene and paint thinner to wipe the printer It may result in coming off the surface of the printer or deformation of the printer s casing e Before transporting the printer remove the Paper tray and the Ink cartridge close the compartment doors and put the printer into the original package or wrap it with soft cloth 17 18 Introduction e Do not remove the Ink cartridge or Paper tray forcibly during printing It may cause malfunction e Do not add any oscillation or shock to the printer It may cause malfunction e Do not allow more than 10 sheets of printed paper to accumulate on the print output receptacle on the top cover of the Paper tray It may cause paper jam e Do not touch the paper during printing It may cause malfunction e Do not turn on and off the printer needlessly to avoid waste of the Ink cartridge The allotted number of sheets of paper may not be printed
Download Pdf Manuals
Related Search