Fisher-Price P3334 Baby Carrier User Manual
Contents
1. One or two lights for shallow sounds Three or more lights for louder sounds e If you experience interference buzzing or static etc while using one channel setting switch both units to other channel Selecting a channel is usually a one time adjustment Hint You will see all five sound lights If you turn the receiver power on before transmitter power You will also hear static noise Turn volume down and turn transmitter power on If the receiver is too far away from the transmitter Move the receiver closer to the transmitter 10 Setup amp Use IMPORTANT Test sound reception of this monitor before first time use and whenever you change location of transmitter see page 8 Adjust Channel e Set transmitter channel switch to same channel as the receiver 11 Setup amp Use e Place transmitter in same room with child Point microphone directly toward crib cot or play area e Unwrap and fully extend power cord for best transmission Plug power cord into wall outlet e Use the power cord only in a wall outlet Do not plug the power cord into a ceiling light e Press transmitter power button to turn power on e Press night light on transmitter for a soft glowing light Press again to turn off night light 12 Setup amp Use Place the receiver where you will see or hear it e Unwrap and fully extend AC adaptor cord for best reception Insert AC adaptor jack into receiver socket and plug into wall outle2. transmitter and receiver away from heat sources such as radiators heat registers direct sunlight stoves amplifiers or other appliances which produce heat e Fisher Price does not recommend the use of two monitors in one house Always remember that you are using public airwaves when using your monitor Conversations even from rooms near transmitter may broadcast to other nursery monitors radios cordless telephones or scanners outside your home To protect privacy of your home always turn transmitter off when not in use Carrier Frequency 40 Mhz Field Strength 73 4dBuV m at 3m e The receiver parent unit may generate a tone when there is radio interference present in the location of operation whilst monitoring The unit will resume to normal when the interference stops e Product features and decoration may vary from photos X e Protect the environment by not disposing of this product with household waste 2002 96 EC am Check your local authority for recycling advice and facilities Europe only GREAT BRITAIN Mattel UK Ltd Vanwall Business Park Maidenhead SL6 4UB Helpline 01628 500303 www service mattel com uk C 0359 Hereby Mattel declares that the product is in compliance with the essential requirements and other relevant provisions of European Council Directives 99 5 EC 89 336 EEC Suitable for the U K Features Features O Transmitter Power Indicator Microphone Power Button 6 Nigh
3. nt e Remove batteries during long periods of non use Always remove exhausted batteries from the product Dispose of batteries safely Do not dispose of this product in a fire The batteries inside may explode or leak e Never short circuit the battery terminals e Use only batteries of the same or equivalent type as recommended e Do not charge non rechargeable batteries e Remove rechargeable batteries from the product before charging e f removeable rechargeable batteries are used they are only to be charged under adult supervision Testing Sound Reception Test transmitter transmission and receiver reception each time you change location of use Power Button ee e Place transmitter in room in which you intend to use it e Press transmitter power button to turn power on Power indicator lights e Set transmitter channel switch to same channel as receiver Turn on a radio Testing Sound Reception ROMA rA oia Deal Power low Battery Indicator Place the receiver in the room in which you intend to use it e Turn power volume dial to turn power on Power low battery indicator lights Adjust receiver location for best reception Hint If battery power is low the power low battery indicator turns orange Replace batteries with three new alkaline AAA LRO3 batteries or use AC adaptor for power source Testing Sound Reception Adjust Channel e Sound lights turn on when sound is received by the receiver
4. or as power source Power is off because circuit breaker for room is off Make sure house fuses and circuit breakers are on No power to wall outlet and power is off Make sure light switch that controls power flow to wall outlet is on Receiver power low battery Batteries in receiver are weak or dead Replace all batteries with three indicator turns orange alkaline AAA LR03 batteries or use AC adaptor as power source Transmitter power indicator does Transmitter power is off Turn transmitter power on not light Loose power cord connection and transmitter power is off Check transmitter power cord plug to outlet connection No power to wall outlet and transmitter power is off Make sure light switch that controls power flow to wall outlet is on Power is off because circuit breaker for baby s room is off Make sure house fuses and circuit breakers are on You can hear conversations or There is signal interference due to other nursery monitors on same sounds from other homes channel or cordless telephone use Change channel switches on both transmitter and receiver to eliminate source of interference Hint If after checking all of these solutions you believe that your transmitter power cord or AC adaptor are damaged please contact Fisher Price 15 Care Excess dirt in transmitter microphone will hamper transmission of sound Clean outer surface of transmitter and receiver with a cloth lightly dampened wi
5. t Note To use batteries as a power source refer to instructions on page 7 e Turn the receiver s power volume dial to turn power on The power low battery indicator lights Turn the power volume dial to adjust the volume 13 Setup amp Use e Clip the receiver to your clothes to stay in touch with baby around your house or yard Hint Under permitting conditions the receiver receives sounds up to 122 metres away from baby 14 Problems amp Solutions You hear static or buzzing Receiver is out of range of transmitter Move receiver closer to transmitter Note Range varies depending on surrounding conditions such as noise levels physical obstructions and signal interference Transmitter power is off Turn transmitter power on Channel switches are on different channels Make sure channel switches on both transmitter and receiver are set to same channel Loose power cord connection and transmitter power is off Check transmitter power cord plug to outlet connection No power to wall outlet and transmitter power is off Make sure light switch that controls power flow to wall outlet is on Power is off because circuit breaker for room is off Make sure house fuses and circuit breakers are on Receiver power low battery Receiver power is off Turn receiver power on indicator does not light Batteries in receiver are weak or dead Replace the batteries with three alkaline AAA LR03 batteries or use AC adapt
6. t Light press to turn on a soft glow 6 Channel Switch D Receiver Speaker Power Volume Dial Turns power on Set volume to a comfortable level Clip backside of receiver Fasten to your clothes to stay in touch with baby around the house or yard a Sound Lights let you see baby s sounds qd Power Low Battery Indicator 3 Channel Switch Assembly Antenna Antenna e Fit each antenna into the socket in the receiver and the transmitter Turn the antennas to secure in place IMPORTANT This product is designed to operate properly with the antennas provided To reduce the chance of potential radio interference to other users assemble and use only the antennas provided Receiver Battery Installation Optional AAA LRO3 15V x3 e Locate battery compartment door on back of the receiver Loosen screws in battery compartment door with a Phillips screwdriver Remove battery compartment door e Insert three AAA LRO3 alkaline batteries into the battery compartment Replace battery compartment door Tighten screws with a Phillips screwdriver Battery Safety Information In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product To avoid battery leakage e Do not mix old and new batteries or batteries of different types alkaline standard carbon zinc or rechargeable nickel cadmium e Insert batteries as indicated inside the battery compartme
7. th a mild cleaning solution Never immerse transmitter receiver or AC adaptor Fisher Price Inc a subsidiary of Mattel Inc East Aurora New York 14052 U S A 13640pr 0726 2009 Mattel Inc All Rights Reserved and designate U S trademarks of Mattel Inc PRINTED IN CHINA
8. www fisher price co uk WARNING IMPORTANT KEEP INSTRUCTIONS FOR FUTURE REFERENCE Important A1 DANGER To prevent electric shock do not immerse in water or expose to rain or moisture wipe clean with damp cloth WARNING To prevent strangulation with power cord never place transmitter within reach of child CAUTION This product cannot replace responsible adult supervision Important For proper setup and use please read these instructions e Please keep this instruction sheet for future reference as it contains important information Transmitter operates on AC current e Receiver operates on AC current use enclosed AC adaptor or three AAA LR03 alkaline batteries batteries not included Adult assembly is required Tool needed for battery installation Phillips screwdriver not included e This product is not intended to be used as a medical monitor and its use should not replace adult supervision Test sound reception of receiver s before first time use and whenever you change location of transmitter e To prevent entanglement Never place transmitter in a crib or playpen Keep transmitter and receiver out of baby s reach Never use extension cords with the AC adaptors Never use transmitter or receiver near water ie bathtub sink laundry tub or wet basement etc Always use transmitter and receiver where there is adequate ventilation To prevent overheating keep
Download Pdf Manuals
Related Search