Emerson EM229 Bluetooth Headset User Manual
Contents
1. Pairing the headset with the SONY PlayStation 3 PS3 Set accessory to Bluetooth on PS3 1 Go to the PS3 main menu scroll to and select Settings 2 Scroll to and select Accessory Settings 3 Scroll to and select Manage Bluetooth Devices 4 The menu will ask The Bluetooth device has not been registered Do you want to register it then select YES Registering the headset to PS3 1 Put the headset into pairing mode See Manual Pairing 2 Select Start Scanning from the PS3 menu 3 Once the PS3 has discovered the headset the screen will read Select the Bluetooth device to register then select EM229 4 The PS3 will ask for a passkey Enter 0000 then select OK Now press O the PS3 circle button to get back to the previous menu 5 Scroll to and select Audio Device Settings to change the Input Device to EM229 NOTE Input Device is the microphone and determines the method of how others will hear you speak By default the Output Device will now switch to EM229 Output Device is the audio and determines how you will hear the PS3 audio and others speaking cannot get the headset into Pairing Mode e Make sure the headset is turned on before beginning the pairing process the headset is in pairing mode when you turn it on for the first time e If you are not pairing for the first time or for manual pai2. registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met It does not imply that Industry Canada approved the equipment Left ear Right ear For further assistance with Bluetooth settings on your PS3 please refer to your PS3 instruction manual NOTE For the best audio quality always wear the headset on the same side of your body as your mobile phone
3. the equipment Limited Warranty In the unlikely event that this product is defective or does not perform properly you may within one 1 year from your Original date of purchase return it to the authorized service center for repair or exchange TO OBTAIN WARRANTY SERVICE e Provide proof of the date of purchase within the package Dated bill of sale e Prepay all shipping costs to the authorized service center and remember to insure your return e Include a return shipping address no P O Boxes a telephone contact number and the defective unit within the package e Describe the defect or reason you are returning the product Your product will be repaired or replaced at our option for the same or similar model of equal value if examination by the service center determines this product is defective Products received damaged as a result of shipping will require you to file a claim with the carrier The shipping address of the authorized service center is s Southern Telecom Inc ATTN Customer Service 2nd Floor 14 C 53rd Street Brooklyn NY 11232 Should you have any questions or problems concerning this product please contact our customer service department at Q 1 877 768 8483 Toll Free Monday Thursday 9AM 5PM EST Friday 9AM 3PM EST or via e mail at M cs southerntelecom com Warranty service not provided This warranty does not cover damage resulting from accident misuse abuse improper
4. until you hear a confirmation beep Making a call Dial the number and press the send button on your mobile phone the call is automatically transferred to the headset Redialing the last number called Dependent on your phone supporting this feature To adjust the volume press the Volume Up or Volume Down button Volume up Volume down NOTE You may also adjust the volume from your mobile phone s volume control Mute Press and HOLD the Volume Down button for 3 seconds or until you hear a confirmation beep repeat to unmute the call Volume down Press 3 seconds to mute For added comfort and noise suppression 3 silicone cushions are included with the headset Choose the silicone cushion S M L which fits most comfortably in your ear and insert it on the headset as shown in the diagram below You may wear the headset with or without the provided earhook If you choose to use the earhook connect it to the headset as shown in the diagram below Earhook Although most people associate Bluetooth headsets with mobile phones there are many other products today which include Bluetooth wireless technology In most cases the pairing process is similar to pairing with a mobile phone which is explained in detail in the Manual Pairing section Below the pairing procedure with the Sony Playsation3 is explained to pair with other devices it is best to refer to the device s Owner s Manual
5. GEME son WIRELESS HEADSET AAAA IIIA AIIAJ 99 OOOOH HHHHOHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHO88888O OOO 0 O19 OO OOOOH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHOHHHHCHO8Ot gt O9 OOOOH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH888O 0000000 OOOHHOHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHOHOOO4 0000 000080808O8HHOH8OOHO8H888888888 BEBO CODOOO a a a A T T Owner s Manual Model EM229 Emerson WIRELESS HEADSET Owner s Manual O gt USB charging cable a AC charger CE Car Charger Bluetooth Headset SML DDD Silicone cushions Earhook Answer end a call Drive Safe CAUTION Although this device enables drivers to conduct handsfree conversations it is still safer to pull over before using a mobile phone Always keep your full attention on your driving Driving while talking on your mobile phone is dangerous and illegal in many states Check local laws regarding the use of a mobile handset and wireless headset while driving If you use the Bluetooth Headset while driving ensure your attention and focus remains on your driving Please use your mobile phone and our product responsibly while driving Location of controls Power Switch Power ON OFF Green ON Red OFF Speaker Silicone cushion Call button Volume up Press 3 seconds to redial Charging socket Volume down In
6. ady to connect to your Bluetooth enabled device 3 Continue to Manual Pairing step 5 shown below Note Manual Pairing If the first time pairing was unsuccessful or for future pairing you will need to manually pair the headset to your Bluetooth enabled device see Manual Pairing below Manual Pairing 1 Make sure the Bluetooth Headset is within 3 feet of your mobile phone or Bluetooth enabled device 2 Set the Power switch to the ON position 3 Press and HOLD the Call button until the indicator light flashes RED and BLUE alternately 4 The headset is now in Pairing Mode and is ready to connect to your mobile phone or Bluetooth enabled device Power Switch Power ON OFF Green ON Red OFF within 3 feet Indicator light NOTE To enter Pairing Mode at any time you must press and HOLD the Call button for approximately 10 seconds 5 Set your mobile phone to search for Bluetooth devices Bluetooth Enabled Paired Devices 6 When the phone finds the headset confirm by selecting EM229 from the list Bluetooth Enabled Paired Devices Select Device 7 Enter the passcode 0000 when prompted by the phone Bluetooth Enabled Paired Devices OOOO Enter numeric passkey for EM229 OR depending on which model mobile phone you are trying to connect the headset to it may not be necessary to enter a passcode and the following message or similar may appea
7. dicator light SONST Charging the headset 1 Connect the charging pin of the USB cable to the charging socket of the headset 2 Connect the other end of the USB cable to either the e AC Charger and plug into a wall A C outlet e Computer s USB port e Car Charger 3 The RED LED indicator light turns on while the headset is charging 4 The RED LED indicator light shuts off when the headset is fully charged approximately 2 3 hours NOTE When the battery is running low the RED LED indicator light starts to flash along with a warning beep USB cable Charging S Socket Indicator light Headset CK Car Charger E AC Charger PE NOTE Charge the headset for at least 8 hours beforeusing it for the first time even if the RED LED indicator shuts off Pairing the headset Easy Pairing First time pairing only Please read through this section before turning the device on This Bluetooth headset has an Easy Pairing feature which sets the headset to Pairing Mode the first time the power switch is turned on 1 Make sure the Bluetooth Headset is within 3 feet of your mobile phone or Bluetooth enabled device within 3 feet lt lt _ _ Indicator light Power Switch Power ON OFF Green ON Red OFF 2 Set the Power switch to the ON position The indicator light should be flashing RED and BLUE alternately indicating the headset is in Pairing Mode and re
8. e of pairing to two mobile phones at the same time Pairing a second phone Multi Link 1 Make sure the headset is turned ON and connected to the first phone 2 Press and HOLD the Volume Down button for 3 seconds or until the headset s indicator light flashes RED and BLUE alternately Press amp hold to pair 2nd phone 3 The headset is now in Pairing Mode and is ready to connect to your second mobile phone 4 Set your second mobile phone to search for Bluetooth devices 5 When the second phone finds the headset confirm by selecting EM229 from the list 6 Enter passcode 0000 when prompted by the second phone OR depending on which model phone you are trying to connect the headset to it may not be necessary to enter a passcode Select Pair to complete the pairing process 7 Your mobile phone will confirm that the pairing process was completed Select Yes to connect the headset to your second mobile phone If the pairing was successful the headset s indicator light turns to standby mode and flashes once every three seconds 8 After pairing the second phone by default the first phone will be disconnected from the headset Enter the first phone s Bluetooth settings screen and connect it to the headset Both phones should now be connected to the headset ue Switching calls between two connected phones 1 While on a call with one phone and the second phone rings with an i
9. installation or operation lack of reasonable care and unauthorized modification This warranty is voided in the event any unauthorized person opens alters or repairs this product All products being returned to the authorized service center for repair must be suitably packaged Limitation of Warranty e THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED NO VERBAL OR WRITTEN INFORMATION GIVEN BY SOUTHERN TELECOM INC IT S AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY e REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER SOUTHERN TELECOM INC SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE Some states do not allow the exclusion nor limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the abo
10. ncoming call press and HOLD the Volume Up button briefly to answer the 2nd call and place the first phone on hold Call button Press amp Hold to switch calls 2 Press and HOLD the Volume Up button briefly to switch between the two phones and place the current phone on hold 3 To hang up the current call press the Call button The headset will end the current call and return to the other phone which was placed on hold 4 To end that call press the Call button or press the End key on your phone Busingtheneadsee Volume NOTE When the Power switch is set to the ON position for the first time the headset will be in Pairing Mode the indicator light will be flashing RED and BLUE alternately please refer to Easy Pairing Powering ON OFF To turn ON set the Power switch to the ON position green Power Switch Power ON Green Indicator light To turn OFF slide the Power switch to the OFF position red The indicator light will flash RED before the headset shuts off Power Switch Power OFF Red Indicator light Answering Ending a call e To answer a call press and release the Call button or press the answer key on your mobile phone e To end a call press and release the Call button or press the end key on your mobile phone Call button Answer end a call Rejecting a call During an incoming call press and HOLD the Call button for 3 seconds or
11. r on your phone s display Bluetooth Enabled Paired Devices EM229 would like to pair with your phone Would you like to allow it to pair Select Pair to complete the pairing process 8 Your mobile phone will confirm that the pairing process was completed and prompt you to accept the connection Please select YES to connect the headset to your mobile phone If the pairing was successful the headset s indicator light turns to standby mode and flashes once every three seconds Bluetooth Enabled Paired Devices Confirm connection to EM229 9 When attempting to reconnect the headset to your mobile phone you may see the message below and your mobile phone will prompt you to accept the connection request to the EM229 headset and an option not to ask this again Please accept the connection and if you select Don t ask this again your phone will automatically accept future connection requests from the headset Bluetooth Enabled Paired Devices Accept connection request from EM229 M Don t ask this again NOTE The screenshots above are typical of many Bluetooth enabled phones in the market today and are used to assist in the explanation of the pairing process Your mobile phone s or Bluetooth enabled device s interface and interaction with the headset may be slightly different from the illustrations shown Pairing the headset with a 2nd mobile phone NOTE This headset is capabl
12. ring press and HOLD the Call button until the indicator light flashes RED and BLUE alternately My mobile phone cannot pair with the headset e Make sure that you fully charged the headset before pairing e Keep the headset and mobile phone within 3 feet of each other during the pairing process e Check that your phone s Bluetooth feature is turned ON e Try removing the battery from your mobile phone for 5 minutes Place the battery back in the phone power it on and retry the pairing process see Manual Pairing e Try repeating the pairing process see Manual pairing After successfully pairing my mobile phone and headset when I shut the phone and turn it on again the headset did not automatically reconnect e Try turning the headset OFF and then turning it ON again e Many mobile phones have an auto reconnect option when first attempting to reconnect to a newly paired Bluetooth device Make sure you accept this option so that the headset automatically reconnects to your mobile phone check the user guide of your mobile phone for more information regarding this option e Try unpairing the headset from your phone and repeat the pairing procedure I hear distortion and the sound quality is poor e For the best audio quality always wear the headset onthe same side of the body as your mobile phone e Check that the battery is charged enough The sound is very low e Try adjusting the volume by
13. using the VOLUME UP or VOLUME DOWN button on the headset make sure the volume on your mobile phone is turned up as well FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission FCC rules These requirements are intended to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Re orient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Do not attempt to repair or modify this equipment Warning Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user s authority to operate
14. ve limitations or exclusions may not apply To test the connection speak into the headset and you will see i i to you This warranty gives you specific legal rights and you the bars above the Microphone Level moving if not repeat the also may have other rights that vary from state to state pairing process TM Operation is subject to the following two conditions 1 This Emerso device may not cause interference and 2 This device must www emersonphones com accept any interference including interference that may cause undesired operation of the device Distributed by Southern Telecom Inc Brooklyn NY 11232 2011 Southern Telecom Inc All rights reserved Emerson and the G Clef logo are registered trademarks of Emerson Radio Corp Parsippany New Jersey USA The Bluetooth word markand logos are owned by the Bluetooth SIG Inc SONY PlayStatiion amp PS3 are either trademarks or registered trademarks of SONY All other trademarks are trademarks of their respective owners Press the Volume Up button for 3 seconds and release The last number called will be redialed Press OK to confirm the new settings You are now ready to use the headset with your PS3 Entertainment System If you would like to hear the PS3 audio through your TV or Audio System scroll to Output Device and switch to System Default Device Volume up Press 3 seconds to redial The term IC before the certification
Download Pdf Manuals
Related Search