Electrolux 79902G Range User Manual
Contents
1. STEPPER MOTOR FOR BURNER 3 _ SOLENOID VALVE STEPPER MOTOR BURNER SPARK GENERATOR 3 EARTH CONNECTION 31 Conversion to LPG Replacing the injectors 1 Remove the pan supports 2 Remove the burner caps and crowns 3 Using a 7 mm socket spanner unscrew and remove the injectors then replace them with the ones required for the new type of gas see the table Burner characteristics 4 Reassemble the parts following the same procedure backwards 5 Replace the Gas Type Label located near the gas supply connection with the one corresponding to the new type of gas The label is supplied in the accessories plastic bag Should the feeding gas pressure be different or variable compared with the required pressure an appropriate pressure regulator must be fitted on the gas supply pipe in compliance with the rules in force Burner characteristics GAS BURNER INJECTOR NOMINAL REDUCED NOMINAL FEEDING TYPE TYPE REFERENCE THERMAL THERMAL FLOW RATE PRESSURE 1 100 mm POWER POWER kW mbar Rapid Semirapid Auxiliary LIQUID GAS Butane Propane Rapid Semirapid i 28 30 37 Auxiliary 32 Setting the hob for the new gas type 1 If necessary activate the hob by touching the main ON OFF Control for about 3 seconds 2 Touch the Timer Control repeatedly to select the auxiliary burner front left b2. The minimum distance combustible material can be fitted above the hob is 400 mm If it is fitted below 400 mm a space of 50 mm must be allowed from the edges of the hob The minimum distance combustible material can be fitted directly above the hob is 700 mm A minimum distance of 100 mm must be left between the side edges of the hob and any adjacent cabinets or walls For appliances installed in the Republic of Ireland please refer to NSAI Domestic Gas Installation I S 813 Current Edition Section 7 Permitted Locations of Appliance FITTING THE GAS HOB WITHOUT A COOKER HOOD ABOVE 600 nm Sauer FITTING THE GAS HOB WITH A COOKER HOOD ABOVE 27 A IMPORTANT This hob must be installed by a competent person to the relevant Gas Standards Any gas installation must be carried out by a competent person The manufacturer will not accept liability should the above instructions or any of the other safety instructions incorporated in this book be ignored Carry out connection to the gas supply using a rigid metal pipe with connections conforming to the rules in force or with a flexible s steel tube conforming to the relevant rules in force limited to those whose max length is 2 m If flexible metal tubes are used make sure they do not come into contact with mobile parts or are crushed Pay the same attention also when an oven and top combination is provided for The appliance gas inlet connection is 1
3. A If you use a saucepan which is smaller than the recommended size the flame will spread beyond the bottom of the vessel causing the handle to overheat Pots must never be placed onto the control zones Always turn the flame down or off before removing pots from the burners Take care when frying food in hot oil or fat as the overheated splashes could easily ignite For an easier ignition of the burner light it before placing the pan on the pan support Unstable or misshapen pans should not be used on the hob as unstable pans can cause an accident by tipping or spillage It is advisable to cook with lids on By using a pressure cooker you will obtain further energy saving and shorter cooking times As soon as a liquid starts boiling turn down the flame so that it will barely keep the liquid simmering Avoid cooking with potstones earthenware pots or cast iron plates Also avoid using aluminiun foil for protecting the top during operation Burner diameter diameter min max Large rapid Medium semirapid Small Auxiliary 17 Cooking Table Recommended cooking time Where no recommendation is given times should be set according to your personal BA O requirement BURNER POWER AUXILIARY SEMI RAPID Py Soups Broths 15 20 minutes Court bouillon Hollandaise Sauces Bechamel 10 minutes Lo Endives Peas in sauce 25 30 minutes Vegetables Provence tomatoes 15 20 minu
4. The model and the serial number see rating label on the back of this instruction booklet 5 Date of purchase Customer Care For general enquiries concerning your AEG Electrolux appliance and for further information on AEG Electrolux products contact our Customer Care Department by letter or telephone at the address below or visit our website at www aeg co uk Customer Care Department calls to this number may be recorded for training purposes 23 Guarantee Conditions Standard guarantee conditions We AEG Electrolux undertake that if within 12 months of the date of the purchase this AEG Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials we will at our discretion repair or replace the same FREE OF CHARGE for labour materials or carriage on condition that The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plate The appliance has been used for normal domestic purposes only and in accordance with the manufacturer s operating and maintenance instructions The appliance has not been serviced maintained repaired taken apart or tampered with by any person not authorised by us All service work under this guarantee must be undertaken by a Service Force Centre Any appliance or defective part replaced shall become the Company s property This guarantee is in addition to your statutory and other l
5. light during this period the gas flow to the burner is interrupted After 3 seconds the ignition device automatically repeats the ignition procedure for another 6 seconds After three failed ignition attempts a safety device is set on the burner The flame level indicators flash Caution When the safety device is set G on a burner the burner controls cannot be operated for about 60 seconds D N A 4 m ooo PESO TA EATS After 60 seconds you can remove the safety device on the burner by touching both the Increasing Controls XQ and the Decreasing Control N Z at the same time Then follow the instructions given in the paragraph How to light a burner Caution Check that the burner cap and crown are correctly positioned see diagram If the ignition problem persists refer to chapter Something not working Never use a manual spark gas lighter if the burner ignition device does not work correctly If necessary use a match In case of accidental extinguishing automatic reignition If the burner flame is accidentally extinguished draughts spilling of liquids etc the gas flow is immediately interrupted After about 20 seconds the ignition device automatically repeats the ignition procedure Upon reignition the burner flame is first set at maximum level then it is automatically adjusted to the level set before it was accidentally extinguished If three consecutive reignition attempts fail a sa
6. n w children to play near or with the hob It is highly recommended to activate the child safety function every time the hob is not operated The hob gets hot during use and some time after it is switched off The hob is supplied with special indicators for the residual heat see chapter How to light a burner Children should be kept away from the appliance until it has cooled down and the residual heat indicators are off During use This instruction booklet must be kept with the appliance for any future reference If the appliance is sold or transferred to another person ensure the booklet is passed on to the new user This hob is intended for domestic cooking only It is not designed for commercial or industrial purposes It is dangerous to modify or try to modify the characteristics of this product e Keep the appliance clean Food residuals increase the risk of fire e This appliance cannot be cleaned with steam or with a steam cleaning machine e Incase of malfunctions never attempt to repair the appliance on your own Repairs carried out by unqualified persons can cause damage and accidents Refer to the contents of this booklet see chapter Something not working If you do not find the information required contact the nearest Service Force Centre Servicing of this appliance must be carried out by an authorised Service Engineer Always insist on genuine spare parts e After using the appliance deactivate it b
7. or pasta and programme the required time for their cooking i The residual heat indicators remain on even when the hob is off until the burner and the pan supports have cooled down 15 How to set the Minute Minder Function You can use the timer as a simple minute minder when none of the burners are operating The hob must be activated in order to use the timer as a minute minder Proceed as follows 1 If necessary activate the hob by touching the main ON OFF Control for about 3 seconds 2 Touch the Timer Control to activate the timer 3 Touch the Increasing AA or Decreasing Y controls to set the required time max time 99 minutes 4 The timer begins the countdown a few seconds after the time has been set 5 During the last ten seconds the timer starts beeping to advise that the timed period is about to end 6 An acoustic signal sounds at the end of the timed period To stop the acoustic signal touch the Timer Control To adjust the time setting 1 Touch the Increasing A or Decreasing NY Control or at any time to adjust the minute minder setting To cancel the time setting 1 Touch the Decreasing N Control to set the minute minder to zero Safety and energy saving advice For a correct use of the hob To ensure maximum burner efficiency and lower gas consumption you should only use pots and pans with a flat bottom fitting the size of the burner used see table
8. out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made even if the appliance is under guarantee PROBLEM CAUSE gt SOLUTION THE HOB DOESN T WORK A BURNER DOESN T WORK ITTAKES TOO LONG TO FINISH THE DISHES THEY ARE COOKED TOO FAST There are blown fuses in the domestic electrical system Switches are turned off or there is no power at the power outlet The hob is not activated The main gas supply tap is closed The gas bottle is empty The hob has overheated and a safety device has been set on the four burners The Child Safety function has been inadvertently activated The safety device has been set on the burner due to repeated ignition failures The flame level indicators and the residual heat indicator flash The pan support or the burner cap and crown were not correctly positioned after cleaning The burner crown holes are obstructed The defect persists The flame level adjustment is not appropriate gt Have the fuses replaced gt Reset the switches gt Touch the main On Off Control gt Open the tap gt Purchase a new bottle gt Allow the top to cool see par Protection against overheating gt Deactivate the Child Safety function see par Child Safety Function gt Wait 60 seconds then follow the instructions given in chapter In case of ign
9. rough edges If necessary remove stubborn stains using a paste cleaner The pan supports can be removed from the hob to enable better cleaning To keep the pan supports in the correct position they are fixed on metal pins located in the back of the hob After cleaning the hob ensure the pan supports are properly placed as shown in the diagram Pay attention when replacing the pan AN supports in order to avoid scratching the glass hob top The Burners Frequently wash the burner caps and crowns using hot soapy water and remove marks with a mild paste cleaner A well moistened soap impregnated steel wool pad can be used with caution if the marks are particularly difficult to remove After cleaning be sure to wipe dry with a soft cloth then place back the crown and the cap in their correct position on the burner For stubborn stains use normal non abrasive cleaners or specific products available on the market NEVER use scouring pads steel wool or acids for cleaning The ignition system The electric ignition is obtained through a spark plug letter C and a metal electrode Keep these components clean to avoid difficult lighting and check that the burner crown holes are not obstructed 20 A B c D Burner Cap Burner crown Spark plug Thermocouple If the hob is not working correctly please carry out the following checks before contacting your local Service ForceCentre IMPORTANT If you call
10. sold each year to a value of approx USD 14 billion in more than 150 countries around the world 35688 7301 04 05 Grafiche MDM Forli
11. 2 cylindrical threaded male Screw the parts together without using excessive force IMPORTANT After installation always AY check the perfect tightness of all the connections using a soapy solution NEVER carry out this check with a flame 28 A Gas ramp end with nut B Washer C Elbow Electrical connections Any electrical work required to install this hob should be carried out by a qualified electrician or competent person in accordance with the current regulations AY THIS HOB MUST BE EARTHED The manufacturer declines any liability should these safety measures not be observed This hobis designed to be connected toa 230V50 Hz AC electrical supply Before switching on make sure the electricity supply voltage is the same as that indicated on the hob rating plate The rating plate is located on the bottom of the hob A copy is attached on the back cover of this book The hob is supplied with a 3 core flexible supply cable incorporating a 3amp plug fitted In the event of having to change the fuse a 3amp ASTA approved BS 1362 fuse must be used Should the plug need to be replaced for any reason the wires in the mains lead are coloured in accordance with the following code Green and Yellow Earth Blue Neutral Brown Live Connect the green and yellow earth wire to the terminal in the plug which is marked with the letter E or the earth symbol or coloured green and yellow Conne
12. 799026 Electronic gas hob Operating instructions CGB CED PERFEKT IN A UND FUNKTION The innovative features of your gas hob Your new gas hob offers several innovative functions that distinguish it from conventional gas hobs e Electronic control of all functions e Touch controls to activate the hob functions simply by touching them with a finger e Electronic Timer to programme your cooking e Automatic reignition of the burners if the flame is accidentally extinguished e Residual heat indicator to advise that the pan supports and the burners are still hot Children safety device to prevent the controls from being accidentally operated General shutdown to turn off all the burners at once for an emergency Safety device in case of power failure or burner ignition failure Contents For the User The innovative features of your gas NOD eseecssecsseesseesseersteccnsecsneecsseessseeesersieeenteenneess 2 FOr your Safety namm ann a alden eed dadiadaidhetaid ddd 4 DY ecvel ait oh C8 amo eatin aU ipl 00 eereprereererreecreeee eer prereecerererterceerrectpererrereterttertenrererrterr nn 6 Operating IMStrUCTIONS esceessessssessssscsesesescseeesescseesseseeceeseeessesseseseesseeeasesseecasesseeeasessteeaeesateeasesateensss 7 Toue iControl S runaruna aaa ana eiar daca AERA 7 HOW tO light a DUTNET seiciiitisreiaaiia niai 8 How to turn off a burner In case of ignition failure In case of accidental ext
13. b Safety Cut off Function If no burner is on but the hob is activated the red indicator above the main ON OFF touch control is on the hob is automatically switched off if no control is operated within 30 minutes 11 c Protection against overheating If the hob is used intensively e g several burners at maximum level for a long time a temperature sensor detects possible overheating and automatically adjusts all the lit burners to minimum If the hob temperature keeps rising although the flame level has been reduced all the lit burners are automatically turned off and a safety device is set on all the four burners i If you select all the burners with the Timer Control one at a time Code number 9 flashes in the cooking time display i Caution When the safety device is set on all the burners their controls cannot be operated for about 60 seconds After the 60 seconds you can reactivate all the burners by touching the Increasing Control AA and the Decreasing Control NJ of one of the four burners at the same time Once the safety device has been removed wait until the hob has cooled down before using it again c Child Safety Function To avoid children operating the hob controls it is possible to lock them 1 Touch the Lock Control Pad for about 3 seconds The red indicator next to the Lock symbol lights up and an acoustic signal sounds Now all the hob controls are locked excep
14. cestecsscescecscsesate dace tasdacrecnecaise sntestectaresteranctaaeeaiecaetaes ctesaedeane neta 24 For the installer Instructions for the Installer 2 cesessssssssscssesssssseessseseesseecseesecssseesseesseesesesaeeeneesaeeenseeaeeeesesteeseseeas 25 Important safety requirements oo eccsecssecsseessecssescseecsseessseessteessesenecsnessseessaeesutseneeenteesneeess 26 Electrical connection S ses ccssesctecst cae Shae see iiaa a adada na 29 Wirng diagraMisysnysin n E E 31 Conversion to LPG ou eeesseesssscssessssssseesseseseesseececeeseeeseesseseaseeseeeaseeseecacesseeeasesseeeaseeseeeasesseeeaseesteeneesseesess 32 Buildingu liinan N E 36 Installation possibilities oe tessssessseessesecstecsstecsseessseessseeeseesstecsneesseessusersusesseeeneeeneesneeess 38 A This new appliance is easy to use Nevertheless it is important to carefully read this booklet before installing or using the appliance for the first time This will allow you to obtain best performance avoid improper actions use the appliance in complete safety and also respect the environment If you need assistance contact our Customer Care Department on 08705 350350 Installation This appliance must be installed and serviced by a competent person as stated in the Gas Safety Installation and Use Regulations Current Editions and the IEE Wiring Regulations For appliances installed in the Republic of Ireland please refer to NSAI Domestic Gas Installations I S 813 Current E
15. ct the blue neutral wire to the terminal in the plug which is marked with the letter N or coloured black Connect the brown live wire to the terminal in the plug which is marked with the letter L or coloured red 29 Upon completion there must be no cut or stray strands of wire present and the cable clamp must be secure over the outer sheath A cut off plug inserted into a 13 amp AN socket is a serious safety shock hazard Ensure that the cut off plug is disposed of safely Permanent Connection In the case of a permanent connection it is necessary that you install a double pole switch between the hob and the electricity supply mains with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations The switch must not break the yellow and green earth cable at any point GREEN amp YELLOW 3 AMP FUSE Ensure that the hob supply cable does not come into contact with surfaces with temperatures higher than 50 deg CABLE CLAMP C Supply cable replacement The cable used to connect the hob to the electrical supply must comply to the specifications given below Min size Cable flex Cable flex type 30 Wiring Diagram I Lxnw POWER BOARD OO BC2 BC3 BCX ego D Geert PE BC1 SECURITY SOLENOID VALVE SOLENOID VALVE STEPPER MOTOR BURNER
16. ditions and the ETCI Rules for Electrical Installations Installation of the appliance and connection to the power supply must only be carried out by QUALIFIED PERSONNEL Before any intervention make sure the appliance is DISCONNECTED from the power supply Ensure that air can freely circulate around the appliance Poor ventilation produces a lack of oxygen Ensure that the gas and electrical supply complies with the type stated on the rating plate located below the front edge of the glass top This appliance is not connected to a combustion products evacuation device It must be installed and connected in accordance with current installation regulations Particular attention shall be given to the relevant regulations ing ventilation When in use gas cooking appliance will produce heat and moisture in the room in which it has been installed Ensure there is a continuous air supply keeping air vents in good condition or installing a cooker hood with a venting hose When using the hob for a long period time the ventilation should be improved by opening a window or increasing the extractor speed After unpacking the appliance make sure the product is not damaged and that the power cable is in perfect condition Otherwise contact the dealer before installing the appliance The manufacturer declines any liability should these safety measures not be observed Child Safety This hob is designed to be operated by adults Do
17. egal rights Home visits are made between 8 30am and 5 30pm Monday to Friday Visits may be available outside these hours in which case a premium will be charged Exclusions This guarantee does not cover Damage or calls resulting from transportation improper use or neglect the replacement of any light bulbs or removable parts of glass or plastic Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom Appliances found to be in use within a commercial environment plus those which are subject to rental agreements Products of AEG Electrolux manufacture which are not marketed by AEG Electrolux European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications The guarantee starts from the date you first purchased your product The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this brand or range of products This guarantee relates to you and cannot be transferred to another user Your new home is within the European Community EC or European Free Trade Area The product is installed and used in accordance with our instructions and is only used domestically i e a normal household The product is installed taking into account regulations in your new country Before you move please contact you
18. fety device is set on the burner The flame level indicators and the residual heat indicator flash Caution When the safety device is set ona burner the burner controls cannot be operated for about 60 seconds After 60 seconds you can remove the safety device on the burner by touching both the Increasing Controls A and the Decreasing Control N Z at the same time Then follow the instructions given in the paragraph How to light a burner 10 0 O D Me a 4 Q0O0000 C How to turn off all the burners at once In case of unexpected safety hazard spilling of liquids children hazard etc you can immediately turn off all the hob burners at once by touching the main ON OFF Control ce Burner Safety Cut off Function If you leave one or more burners lit and unattended for a long time that is you don t touch any control for at least 4 hours each lit burner is automatically turned off and a safety device is set on it Gi If you select the burner that doesn t work with the Timer Control Code number 10 flashes in the cooking time display Caution When the safety device is set on a burner the burner controls cannot be operated for about 60 seconds After 60 seconds you can remove the safety device on the burner by touching both the Increasing Controls AX and the Decreasing Control N at the same time Then follow the instructions given in the paragraph How to light a burner ce Ho
19. inguishing automatic reignition sscecceeeeeeee 10 How to turn off all the burners at ONCE won eessseecsstessseecsssecsteceseecneesnseessneesseessteeenteesneees 11 Burner Safety Cut off Function o eeescesssessescseessescseesseecesesseecseeseteessesnseeeeesateestesnteeatesneeeatees 11 Hob Safety Cut off Function eeseeessessseecseesceesseeseecseeseecesessesesseesesestesseecetesntessteseeesaeesneesaeees 11 Protection against overheating 0 eessescseecsteccntessneessseessseesstecsseecsseessseessaterseeeenteeenteesneeees 12 Child Safety RUM CU ONS lt ccsiitccctcerctrticeceetaciecisinr aiteehahiea at eaggethiae ieee tlh dati a adertate 12 The Electronic TIM sctiscccsesasinaynenacatinayhintanivipnanstiaasdgainaadatiennaeartanaaaues 13 How to programme a burner to switch Off on essseesseseestecseecsseessseesseeeseessteeeneenneess 14 How to set the Minute Minder Function ou essssssssecstecseecsseessssessteesstsesetecneesnneesneeess 16 Safety and energy saving advice esseeccseesnecsseessscssssessescneesntessssesssseestsesstecntessnseesneeesaeessess 17 Cooking Tablet aaria enne AR A 18 Cleaning and m intenanCEsssascrissssinnnn a 19 Something not working un esseecseecssescseescnteesntecsseessseessescsseecnseesntesssseesueesuteesatecneesnessnseesneeeesess 21 Service and Spare Pais urort n i Ri pia 23 Customer Care sosisini aaneen ioaea eraa eaaa ae aeia ea Eae aa aaaea a Aa eaaa E a E RE 23 Guarantee Conditions scsccccsccssecscecac
20. ition failure gt Check the correct position see par In case of ignition failure gt Follow the instructions given in the section Cleaning and maintenance gt Contact an authorized technical assistance centre gt See the section How to light a burner 21 If after all these checks your hob still does not operate correctly contact your local Service Force Centre Please note that it will be necessary to provide proof of purchase for any in guarantee service calls In guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown 22 Service and Spare Parts If you require spare parts or an engineer contact your local Service Force Centre by telephoning 0870 5 929 929 Your call will be routed to your local Service Force Centre For the address of your local Service Force Centre and further information about Service Force please visit the website at www serviceforce co uk For Customer Services in the Republic of Ireland please contact us at the address below AEG Electrolux Electrolux Groupl Irl Ltd Long Mile Road Dublin 12 Republic of Ireland Tel 353 0 1 4090 754 Email service eid electrolux ie When you contact the Service Centre they will need the following information 1 Your name address and post code 2 Your telephone number 3 Clear and concise details of the fault 4
21. l heat indicator SN VY c How to light a burner 1 Touch the main ON OFF Control for about 3 seconds to switch on the hob The red indicator above the touch control lights up an acoustic signal sounds and the hob is ready to use 2 Touch the Burner Ignition Touch Control O of the required burner The flame level indicators located right above the symbols SN and NZ illuminate Within about 3 seconds touch the Increasing AA or Decreasing NY Touch Control to light the burner If touch control A is selected the burner automatically lights at maximum flame level all the flame level indicators illuminate If touch control NZ is selected the burner automatically lights at medium flame level three flame level indicators illuminate 4 To adjust the burner flame level use the Increasing N or Decreasing N Touch Control The residual heat indicator QQ lights up immediately after the burner is lit This means that the cooking zone is getting hot the indicator remains on until the pan support and the burner have cooled down c How to turn off a burner 1 To turn off a burner press the relevant Burner Ignition Touch Control Q All the flame level indicators go off The residual heat indicator remains on until the pan support and the burner have cooled down c In case of ignition failure The hob ignition device generates a series of small sparks for about 6 seconds If the flame does not
22. ld waste disposal service or the shop where you purchased the product Guide to Use the instructions The following symbols will be found in the text to guide you throughout the Instructions AN Safety Instructions Ee Step by step instructions for an operation i Hints and Tips Y Environmental Information These instructions are only valid for countries whose identification symbols are given on the cover of the instruction booklet and on the appliance Description of the hob Semirapid Semira burner burner F F DY Auxiliary Rapid burner burner Rear left burner control zone Front left burner control zone Timer control zone Front right burner control zone Child Safety Control Main ON OFF switch Rear right zone Operating instructions Before using the appliance remove all packaging including the advertising labels and any protective film Touch Controls The hob is supplied with special Touch Controls To operate your hob simply touch the required control with a fingertip Ensure to only touch one control at a time during use Here follow the symbols for the main Touch Controls and the relevant indicators Main ON OFF Touch Control Burner control zone D Burner Ignition Touch Control oe OO ae Flame level indicators o W O A N Increasing Touch Control for the flame level Q N N Decreasing Touch Control for the flame level O00000 N ro Residua
23. m Building over a unit with an oven The recesses for the hob and the oven must comply the indication given in Figs 6 and must be provided with openings to allow a continuous supply of air Two possible solutions to avoid excessive overheating are described in Fig 7 and 8 The electrical connection for the hob and the oven must be carried out separately for safety reasons and also to allow the oven to be easily removed from the unit if necessary 38 Fig 5 a removable panel b space for connections Hanging furniture units or hoods must be placed at 650 mm minimum from the hob Fig 6 The electronic gas hob can only be installed over a built in oven equipped with cooling fan If the hob is installed over a AN built in oven equipped with pyrolytic cleaning function the hob must not be in use while the pyrolytic cleaning cycle of the oven is running Fig 6 120 cm2 FO 0938 FO 0939 39 AEG Haugerate GmbH Postfach 1036 D 90327 N rnberg http www aeg hausgeraete de Copyright by AEG EO From the Electrolux Group The world s No 1 choice The Electrolux Group is the world s largest producer of powered appliances for kitchen cleaning and outdoor use More than 55 million Electrolux Group products such as refrigerators cookers washing machines vacuum cleaners chain saws and lawn mowers are
24. nd please refer to NSAI Domestic Gas Installation I S 813 Current Editions and the ETCI Rules for Electrical Installations Provision for ventilation Detailed recommendations are contained in the following British Standards Codes Of Practice B S 6172 B S 5440 Part 2 and B S 6891 Current Editions The hob should not be installed in a bed sitting room with a volume of less than 20 m If it is installed in a room of volume less than 5 m an air vent of effective area of 110 cm is required If it is installed in a room of volume between 5 m and 10 m an air vent of effective area of 50 cm is required while if the volume exceeds 11 m no air vent is required However if the room has a door which opens directly to the outside no air vent is required even if the volume is between 5 m and 11 m If there are other fuel burning appliances in the same room B S 5440 Part 2 Current Edition should be consulted to determine the requisite air vent requirements For appliances installed in the Republic of Ireland please refer to the NSAI Domestic Gas Installation I S 813 Current Editions Table Four 26 Location The hob may be located in a kitchen a kitchen diner or bed sitting room but not in a bathroom or shower room Before making the cut out in the worktop ensure that the edges of the hob that are to be near either a side or rear wall have a minimum distance of 55 mm between the edge of the hob and the wall
25. observed The hob dimensions and the cut out dimensions are given in fig 1 and 2 36 Dimensions are given in millimetres A Worktop B Removable Panel Fig 2 Fitting the hob to the worktop Before fitting the hob into the cut out an adhesive seal must be fitted to the underside outside edge of the hob It is essential that no gaps are left in this seal in order to prevent spillage near the hob seeping into the cabinet below Ee Proceed as follows 1 Remove the pan supports the burner caps and crowns and turn the hob upside down taking care that the spark plugs and the thermocouples are not damaged in this operation 2 Place the sealing gasket all around the glass top edge as shown in Fig 3 3 Fit the hob in the cut out and push it down until the glass top and the worktop make contact as shown in Fig 4 The side springs ensure centering Fig 3 A Seal Fig 4 37 Installation possibilities Building over a kitchen unit with door Proper arrangements must be taken in designing the furniture unit in order to avoid any contact with the bottom of the hob which can be heated when it is operated The recommended solution is shown in Fig 5 The panel fitted under the hob a should be easily removable to allow easy access if technical assistance is needed See also Fig 2 The space behind the kitchen unit b can be used for connections Dimensions are in m
26. r nearest Customer Care centre listed below to give them details of your new home They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances France Senlis 33 0 3 44 62 29 29 Germany Niirnberg 49 0 800 234 7378 Italy UK 24 Pordenone 39 0 800 117511 Sweden sone 46 0 8 672 WO Instructions for the Installer Engineers Technical Data Gas burner power Rapid burner large 2 9 kW Natural gas 20 mbar 2 7 LPG 28 30 37 mbar Semirapid burner medium 1 9 kW Auxiliary burner small 1 0 kW Supply connections Gas R 1 2 inch 1 2 inch male Rear right hand corner Electric 230 V 50 Hz supply 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse Appliance class 3 Appliance category I12H3 Appliance gas supply Natural gas G20 20mbar Overall dimensions Width 730 mm Depth 510 mm Cut out dimensions Width 710 mm Depth 470 mm This appliance complies with the following EEC Directives 73 23 and 90 683 on Low Voltage 89 336 on Electromagnetic Compatibility 90 396 on Gas Appliances 93 68 on General Standards and subsequent amendments 25 Important safety requirements This hob must be installed in accordance with the Gas Safety Installation and Use Regulations Current Edition and the IEE Wiring Regulations Current Edition For appliances installed in the Republic of Irela
27. t 3 seconds Light the burner and adjust the flame level using the Increasing A or Decreasing NY controls see par How to light a burner Activate the Timer by touching the Timer Control and select the required burner by repeatedly touching the Timer Control Set the required cooking time touching the Increasing AX and Decreasing NY Controls max time 99 minutes Once the cooking time has been set the burner selection can no longer be changed If you want to change burner you must set the cooking time to zero by means of the Decreasing N control and then change the burner selection by touching the Timer Control The timerstarts the countdown a few seconds after the cooking time has been set During the last ten seconds the timer starts beeping to advise that the cooking time is about to end An acoustic signal sounds at the end of the cooking time To stop the acoustic signal touch the Timer Control To adjust the cooking time 1 Touch the Increasing AA or Decreasing NY Control or at any time to adjust the time setting To cancel the time setting 1 Touch the Decreasing N Z Control to set the cooking time to zero i Itis possible to programme the switch off of ONLY one burner at a time i You can set the cooking time as well when the burner is already lit For example you can bring a pot of water to the boil then put some vegetables meat
28. t the main ON OFF Touch Control Any lit burner keeps operating but cannot be adjusted 2 To unlock the hob controls touch the Lock Control Pad for about 3 seconds The red indicator next to the Lock symbol goes off and an acoustic signal sounds i It is highly recommended to activate the child safety function every time the hob is not operated In case of a power failure the hob stores the children safety function setting in the system memory If the controls are locked at the time of the power failure they will still be locked when the power is restored The Electronic Timer Your hob is supplied with an electronic timer enabling you to programme the cooking duration The timer can also be used as a minute minder when the hob is not in use The hob can even be used manually i e without any programming The timer only operates when the hob is switched on by means of the main ON OFF Control Here follow the symbols in the Timer Control Zone Touch Control to activate the Timer and select a burner Aa Cooking time display i og E O Burner selection display A N Increasing Touch Control for the time setting Decreasing Touch Control for the time setting Timer control zone 13 c How to programme a burner to switch off To programme a burner to switch off proceed as follows 1 If necessary activate the hob by touching the main ON OFF Control for abou
29. tes Fried potatoes Pasta Meat Steak in pot Fried escalope 10 12 minutes 18 22 minutes Rice pudding 35 minutes Stewed fruit Desserts Pancakes 3 4 minutes Chocolate 5 6 minutes 20 25 minutes Where two burners are indicated in the table it is recommended that you choose the burner taking into consideration the quantity of food to be cooked 18 Cleaning and maintenance Before any maintenance or cleaning can be carried out you must DISCONNECT the hob from the electricity supply and wait until it has cooled down This appliance cannot be cleaned with steam or with a steam cleaning machine The Hob Top Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which alittle washing up liquid has been added Avoid the use of the following household detergent and bleaches impregnated pads unsuitable for non stick saucepans steel wool pads bath sink stain removers Should the hob top become heavily soiled it is recommended that proper cleaning product is used If scratches or cracks are noticed on AN the glass top immediately disconnect the appliance from the electrical supply to avoid the risk of electrical shock Then contact your local Service Force Centre and avoid using the appliance until it has been repaired 19 Pan Supports The pan supports are dishwasher proof If washing them by hand take care when drying them as the enamelling process occasionally leaves
30. the hob for the new gas type points 1 2 and 3 2 Light the burner to be adjusted following the instructions given in the paragraph How to light a burner The burner is automatically set to the minimum flame level 3 If the flame minimum level is too low the burner extinguishes The hob automatically carries out a minimum level adjustment and then relights the burner 34 4 While the flame is on touch the Increasing N or Decreasing NJ Controls to carry out a fine adjustment until a small and regular flame is obtained on the whole burner crown 0 OO D Ro 5 Switch off the hob touching the main ON OFF Control Q Q oOoooow 35 Building In A Auxiliary burner SR Semirapid burner R Rapid burner Fig 1 The hob is designed to be inserted in modular kitchen units with depth of 550 600 mm and having proper characteristics The building in is also possible in modular units with a 600 mm width in this case the cut out in the work top must be carried out as shown in Fig 2 The worktop must be at least 30 mm thick If the worktop is thicker than 50 mm it is possible to install the hob on modular units of any width Any unit furniture unit household appliance etc placed near the unit which the hob is built in shall not exceed the worktop height A A minimum clearance of 100 mm between the cut out in the worktop and any side wall exceeding the worktop height must be
31. urner on the burner selection display 3 Touch the Increasing Control AA and hold the finger on it until the value 99 appears on the time display Then touch the Decrasing Control NJ and hold the finger on it until the value 80 is displayed 4 Then touch the Increasing Control AA until 83 is displayed At this point the hob is set to the Gas Change mode and the current gas setting appears on the display NO stands for gas G20 20 mbar n1 for gas G30 28 30 37 mbar A IMPORTANT setting N2 does not allow the hob to function 33 4 Touch the Decreasing Control N Z to select the required type of gas 5 After selecting the type of gas switch off the hob touching the main ON OFF Control 6 Touch the main ON OFF Control O again to reactivate the hob The appliance is automatically set to the normal User Mode 7 Light all the burners and adjust their flame to minimum in order to check the flame stability visual check 8 At the same time check the flame aspect visual check If both the flame stability and the flame aspect are satisfactory the setting of the hob for the new gas type is completed If the flame stability is not satisfactory carry out an additional adjustment as described in the following paragraph Minimum flame adjustment If the flame stability and the flame aspect are not satisfactory proceed as follows 1 Carry out the steps described in the paragraph Setting
32. y using the main ON OFF touch control and make sure the relevant red indicator is off Then lock all the hob controls by touching the Lock Control A e When using other electrical appliances ensure the cable does not come into contact with the hot surfaces of this cooking appliance v Environmental Information e All the materials used are environment friendly and recyclable Please make your contribution to safeguarding the environment by using the special differentiated collection channels e Dismantled or no longer used appliances are not worthless waste Through ecological disposal various materials used in the production of your appliance can be recycled e Find out about the current possibilities of disposal from your specialised dealer or from your local Council e When disposing of an old appliance make it unusable by cutting off the cable The symbol asd on the product or on its packaging indicates that this product may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your househo
Download Pdf Manuals
Related Search