Edelbrock 66793 Automobile Parts User Manual
Contents
1. TX 761DAB DAB FM AM Stereo Tuner OWNER S MANUAL Caution Read this before operating your unit 1 To assure the finest performance please read this manual carefully Keep it in a safe place for future reference 2 Install this sound system in a well ventilated cool dry clean place away from direct sunlight heat sources vibration dust moisture and or cold Allow ventilation space of at least 10 cm on the top and 10 cm on the back of this unit 3 Locate this unit away from other electrical appliances motors or transformers to avoid humming sounds 4 Do not expose this unit to sudden temperature changes from cold to hot and do not locate this unit in a environment with high humidity i e a room with a humidifier to prevent condensation inside this unit which may cause an electrical shock fire damage to this unit and or personal injury 5 Avoid installing this unit where foreign object may fall onto this unit and or this unit may be exposed to liquid dripping or splashing On the top of this unit do not place Other components as they may cause damage and or discoloration on the surface of this unit Burning objects i e candles as they may cause fire damage to this unit and or personal injury Containers with liquid in them as they may fall and liquid may cause electrical shock to the user and or damage to this unit 6 Do not cover this unit with a newspa2. 174 240 MHz and L Band 1 452 1 492 MHz This unit is able to receive both Service bands Audio signal and service information 10 2 DAB Digital Audio Broadcasting tuning Preparing the DAB tuning Before tuning into DAB services you must perform the automatic scanning YAMAHA 06066 AUTO SCAN BAND BAND 01 AUTO SCAN 0000 GGG i 0 Press BAND on the front panel or remote control repeatedly to select DAB as the reception band The DAB indicator lights up in the front panel display and then DAB initialize appears in the front panel display When you select DAB as the reception band for the first time the following message appears for 2 second This unit starts scanning for DAB services in the area and add them to the channel list as they are found The number of channels found is displayed The number is updates when new channels are found Once the scanning is complete this unit is tuned into the DAB service of the DAB service registry list ale 592 When you have already performed the automatic scanning before you set this unit to the DAB tuning mode for the first time DAB initialize does not appear in the front panel display See step 2 on page 12 and proceed with the DAB tuning
3. SIS OOO Batteries 2 AAA 03 UM 4 Installing batteries in the remote control 1 Press the 7 part and slide the battery compartment cover 2 Insert the two supplied batteries R03 UM 4 according to the polarity markings and on the inside of the battery compartment 3 Slide the battery compartment cover back until it snaps into place Notes Change all of the batteries if you notice the operation range of the remote control decreases Do not use an old battery and a new one together Do not use different types of batteries such as alkaline and manganese batteries together Read the packaging carefully as these different types of batteries may have the same shape and color If the batteries have leaked dispose of them immediately Avoid touching the leaked material or letting it come into contact with clothing etc Clean the battery compartment thoroughly before installing new batteries Do not throw away batteries with general house waste dispose of them correctly in accordance with your local regulations Audio pin cable Digital audio pin gt d 2 cable a zZ Using the remote control The remote control transmits a directional infrared ray Be sure to aim the remote control directly at the remote control sensor on this unit during operation Ov Approximately 6 Notes
4. Deletes a group of inactive 14 DAB ensembles and services Select this setting to browse currently from the DAB registry list available DAB services quickly This unit lists the currently active DAB services first and then other DAB Press FUNCTION again to exit from the services in the alphanumeric order DAB setup menu Select this setting to browse through the registered DAB services from the lowest to the highest channel labels Select this setting to browse through the top 10 services most frequently selected with this unit appears after the name of services that are listed at the top of the channel list 13 En DAB Digital Audio Broadcasting tuning Tuning aid 1 Use this feature to adjust the positioning of the DAB antenna and this unit It is recommended that you perform this operation when setting up this unit in order to maximize the DAB reception capability 1 Select Tune aid in the DAB setup menu See page 13 for details The following message appears in the front panel display Rotate PRESET TUNING or press TUNING repeatedly to select the desired DAB channel and then press SELECT Select a DAB channel that is broadcast from the nearest station Channel label Frequency T The strength of the selected DAB channel signal appears in the front panel display Adjust the orientation of the DAB antenna so that the strength of the se
5. Do not spill water or other liquids on the remote control Do not drop the remote control Do not leave or store the remote control in the following types of conditions places of high humidity such as near a bath places of high temperature such as near a heater or stove places of extremely low temperatures dusty places En Controls and functions Front panel YAMAHA DIMMER STANDBY ON Turns on this unit Press this button again to set this unit to the standby mode see page 9 Note In the standby mode this unit consumes a small amount of power in order to receive infrared signals from the remote control 2 Front panel display Displays information of the currently tuned DAB FM or AM radio station or the operational status see page 6 PRESET TUNING e Selects the preset DAB FM or AM stations or services when this unit is in the preset tuning mode Selects the DAB FM or AM stations or services when this unit is not in the preset tuning mode DIMMER Sets the brightness of the front panel display see page 6 Press hold DIMMER for 3 seconds to display the firmware version of this unit This information is factory use only AUTO SCAN Starts the automatic scanning function when this unit is in the DAB tuning mode see page 12 0 MEMORY Sets this unit to the preset station memory mode when this unit is in the DAB tuning m
6. Program type Ensemble label Date and time Audio mode and bitrate Channel label frequency Signal quality DAB module firmware version Notes information order starts from the beginning again after the signal quality information has been displayed in the front panel display You cannot perform this operation when Off is displayed DLS Dynamic Label Segment Displays information about the current DAB service Examples are the title of the current song or program the name of the artist or speaker and the name of the next song or program This data is continuously updated by the DAB broadcaster thus changing often with every new song or program Other data such as news weather and sports headlines may be broadcast as well Program type Displays the genre song or program type of the current DAB service up to 16 characters Ensemble label Displays the name of the current ensemble up to 16 characters Date and time Displays the current date and time This data is updated with each passing minute Audio mode and bit rate Displays the audio mode and bit rate of the current DAB service Channel label and frequency Displays the channel label and frequency of the current DAB service Signal quality Displays the signal quality of the current DAB service ranging from 0 none to 100 best A higher number means a better reception level 22 For
7. monaural when this unit is in the FM tuning mode see page 19 SELECT TUNING MODE Selects the tuning mode automatic manual or preset tuning when this unit is in the FM AM tuning mode POWER Turns on this unit Press this button again to set this unit to the standby mode see page 9 2 D O g Cc 2 In the standby mode this unit consumes a small amount of power in order to receive infrared signals from the remote control BAND Selects the reception band DAB FM or AM INFO TEXT Turns on and changes the Radio Data System or DAB service information in the front panel display AUTO SCAN Starts the automatic scanning function when this unit is in the DAB tuning mode see page 11 MEMORY Sets this unit to the preset station memory mode when this unit is in the DAB tuning mode see page 15 or FM AM tuning mode see pages 21 and 22 CLEAR Deletes the preset memory of the currently selected preset station number see pages 16 and 22 TUNING A V e Selects the preset DAB FM or AM stations or services when this unit is in the preset tuning mode e Selects the DAB FM or AM stations or services when this unit is not in the preset tuning mode 5 En Controls and functions Rear panel FM AM ANTENNA terminals See page 8 for connection information OUTPUT jacks See page 7 for connection information Front panel display
8. This unit starts the local range scanning Autoscan Local appears in the front panel display Once this unit has finished scanning this unit is tuned into the first DAB station in the DAB service registry list Note If this unit cannot detect a DAB service in the DAB service registry list when this unit performs the automatic scanning operation this unit deletes the service 11 n ONINNL DAB Digital Audio Broadcasting tuning DAB tuning Use this feature to select the desired DAB services by browsing the DAB service registry list Note Once you have performed the automatic scanning the registry list of available services is updated automatically as long as this unit is in the DAB tuning mode To register new ensembles use the automatic scanning function see pages 11 YAMAHA Ol 5 SELECT FUNCTION PRESET TUNING BAND AUTO SCAN TUNING A V 1 Press BAND on the front panel or remote control repeatedly to select DAB as the reception band Name of the current DAB service Dynamic label segment see page 17 12 En 2 Rotate PRESET TUNING or press TUNING Y repeatedly to select the desired DAB service Current DAB service Selected DAB service If the selected DAB service is listed in the top 10 services most frequently selected appears after
9. 4 Default setting desired preset station number Selecting the desired preset station directly 1 Press BAND on the remote control repeatedly to select the reception band FM AM 2 Press the numeric buttons to enter the desired preset station number vie 2 To enter numbers less than 10 i e 1 to 9 by using numeric buttons on the remote control press the desired number and then ENTER or press 0 and then enter the desired number 23 En FM AM tuning Select PROGRAM SERVICE to display the name of the Radio Data System program currently being received Select PROGRAM to display the type of the Radio Data System program currently being received Select RADIO TEXT to display the information on the Radio Data System program currently being received Select CLOCK TIME to display the current time Select TRAFFIC ANNOUNCE to display the traffic information When you select this display mode this unit searches the Radio Data System broadcasting station that provides the TRAFFIC ANNOUNCE Radio Data System service automatically Notes It may take a while for this unit to receive all of the Radio Data System data from the station If the signals being received are not strong enough this unit may not be able to utilize the Radio Data System data In particular the RADIO TEXT mode requires a large amount of data and may not be available ev
10. TUNED indicator Lights up when this unit is tuned into a station STEREO indicator Lights up when this unit is in the stereo playback Multi information display Shows tuning status messages and DAB or Radio Data System information Adjusting the brightness of the front panel display Press DIMMER on the front panel repeatedly to change the brightness of the front panel display 6 En 3 DAB ANTENNA terminal See page 8 for connection information AC IN See page 9 for connection information SECONDARY SECONDARY indicator Lights up when this unit is in the DAB tuning mode and receiving a secondary service Flashes for 5 seconds when this unit is tuned into the DAB service which has a secondary service Connecting this unit to an amplifier Make sure that this unit and other components are unplugged from the AC wall outlets ANALOG OUTPUT jacks Connect the supplied audio pin cable to the ANALOG OUTPUT jacks of this unit and the analog audio input jacks of your amplifier as follows DIGITAL DAB OUTPUT jacks This unit is equipped with the DIGITAL DAB OUTPUT jacks OPTICAL and COAXIAL These jacks output the digital audio signals PCM signals when this unit is in the DAB tuning mode Connect the supplied digital audio pin cable to the DIGITAL DAB COAXIAL OUTPUT jack of this unit and the digital coaxial input jack of your amplifier You can also use a digital optical audio cable
11. 936 MH 8A 2 S 1468 368 MHz LJ 197 648 MHz 8B 1470 080 MHz LK 199 360 MHz 8C 1471 792 MHz LL 201 072 MHz 8D 1473 504 MHz LM 202 928 MHz 9A 1475 216 MHz LN 204 640 MHz 9B 1476 928 MHz LO 206 352 MHz 9C 1478 640 MHz LP 208 064 MHz 9D 1480 352 MHz LQ 209 936 MHz 10A 1482 064 MHz LR 211 648 MHz 10B 1483 776 MHz LS 213 360 MHz 10C 1485 488 MHz LT 215 072 MHz 10D 1487 200 MHz LU 216 928 MHz 11A 1488 912 MHz LV 218 640 MHz 11B 1490 624 MHz LW 220 352 MHz 11C 222 064 MHz 11D 223 936 MHz 12 225 648 MHz 12 18 n FM AM tuning Automatic and manual tuning YAMAHA 5 5 Q 5 BAND TUNING PRESET MODE TUNING FM MODE BAND FM MODE 2 TUNING A V TUNING MODE Automatic tuning Automatic tuning is effective when station signals are strong and there is no interference 1 Press BAND on the front panel or remote control repeatedly to select the reception band FM AM 2 Press TUNING MODE or remote control to select Auto tune 3 Rotate PRESET TUNING or press TUNING to begin automatic tuning When this unit is tuned into a station the TUNED indicator lights up and the frequency of the received station is shown in the front panel display Program service see page 24 KR Pi TUNED j 282 If the s
12. on the front panel or remote i reception band control repeatedly to select DAB as the reception band 2 Press FUNCTION on the front panel or remote control 2 Press FUNCTION on the front panel or The DAB function menu appears in the front panel remote control to activate the DAB setup display menu The last selected DAB function appears in the front panel display 3 Rotate PRESET TUNING or press TUNING repeatedly to select Station order and then press SELECT The station order setting appears in the front panel display 3 Rotate PRESET TUNING or press TUNING repeatedly to select the desired DAB function and then press 4 SELECT You can select the following functions Refer to the pages indicated in the following pages for details ONINNL Rotate PRESET TUNING or press TUNING repeatedly to select the desired station order setting and then press about the operations in each function SELECT DAB function Function Page Current station order setting Selects the preset DAB 15 services Selects the order of the DAB 13 DABiregistry Selected station order setting Displays the strength of the 14 Choice Descriptions selected DAB service Default setting Select this setting to browse through all of the registered DAB services in the alphanumeric order Selects the dynamic range 14 control mode
13. received program is monaural 19 En ONINNL FM AM tuning Selecting the Radio Data System program type PTY SEEK mode Use this feature to select the desired FM radio program by program type You can use this feature for the FM radio programs providing the Radio Data System information signals Descriptions News Current affairs General information Sports YAMAHA Education Drama INFO TEXT PRESET TUNING INFO TEXT SELECT 1 Press BAND on the front panel or remote control repeatedly to select FM as the reception band 2 press and hold INFO TEXT on the front panel or remote control for more than 3 seconds to set this unit to the PTY SEEK mode PROGRAM TYPE appears in the front panel display 3 Rotate PRESET TUNING or press TUNING V repeatedly to select the desired program type The name of the program type appears in the front panel display Program type Cultures Science Varied Speech Pop Music Rock Music Easy Listening Light Classical Music TUNING A V Serious Classical Music Other Music Weather amp Meteorology Finance Children s Program Social Affairs Religion Phone In Travel amp Touring Leisure amp Hobby Jazz Music Country Mus
14. 0 2 dBf Usable Sensitivity Signal to Noise 30 dB Mono Image Response Ratio IF Response Ratio Selectivity 400 kHz e Signal to Noise Ratio Mono Stereo 80 dB 75 dB Harmonic Distortion 1 kHz Mono Stereo 0 3 0 5 e Stereo Separation 40 kHz Dev 43 dB e Frequency response 20 Hz to 15 2 3 dB e Antenna Input unbalanced 2 750 VE UT Range 522 to 1620 kHz Usable Sensitivity 300 uV m 30 dB e Signal to Noise 50 Image Response 35 Harmonic Distortion 1 0 GENERAL Power Supply Maem AC 230 V 50 Hz Power Consumption Dimensions WX HX D 2 00200 435 x 87 x 307 mm vT T 3 2kg Specifications are subject to change without notice 29 En 2 99 So SE YAMAHA 2007 YAMAHA CORPORATION All rights reserved YAMAHA ELECTRONICS CORPORATION USA 6660 ORANGETHORPE AVE BUENA PARK CALIF 90620 U S A YAMAHA CANADA MUSIC LTD 135 MILNER AVE SCARBOROUGH ONTARIO M1S 3R1 CANADA YAMAHA ELECTRONIK EUROPA G m b H SIEMENSSTR 22 34 25462 RELLINGEN BEI HAMBURG GERMANY YAMAHA ELECTRONIQUE FRANCE S A RUE AMBROISE CROIZAT BP70 CROISSY BEAUBOURG 77312
15. MARNE LA VALLEE CEDEX02 FRANCE YAMAHA ELECTRONICS UK LTD YAMAHA HOUSE 200 RICKMANSWORTH ROAD WATFORD HERTS WD18 7GQ ENGLAND YAMAHA SCANDINAVIA A B J A WETTERGRENS GATA 1 BOX 30053 400 43 VASTRA FROLUNDA SWEDEN YAMAHA MUSIC AUSTRALIA PTY LTD 17 33 MARKET ST SOUTH MELBOURNE 3205 VIC AUSTRALIA YAMAHA CORPORATION Printed in China lt CQX1A1262Y
16. ales receipt showing date of purchase product code and dealer s name MUST accompany the defective product along with a statement detailing the fault In the absence of this clear proof of purchase Yamaha reserves the right to refuse to provide free of charge service and the product may be returned at the customer s expense 2 The product MUST have been purchased from an AUTHORISED Yamaha dealer within the European Economic Area EEA or Switzerland 3 The product must not have been the subject of any modifications or alterations unless authorised in writing by Yamaha 4 The following are excluded from this guarantee a Periodic maintenance and repair or replacement of parts due to normal wear and tear b Damage resulting from 1 Repairs performed by the customer himself or by an unauthorised third party 2 Inadequate packaging or mishandling when the product is in transit from the customer Please note that it is the customer s responsibility to ensure the product is adequately packaged when returning the product for repair 3 Misuse including but not limited to a failure to use the product for its normal purpose or in accordance with Yamaha s instructions on the proper use maintenance and storage and b installation or use of the product in a manner inconsistent with the technical or safety standards in force in the country where it is used 4 Accidents lightning water fire improper ventilation battery leakage or a
17. als i e FM AM are susceptible to interference i e distorting and noise caused by electrical equipment weather conditions tall buildings mountains etc whereas digital signals are not Thus with DAB there is virtually interference free reception and no hiss or crackle Another advantage of DAB is that a large amount of information can be carried within the digital signal DAB is broadcast in blocks of data called ensembles also known as multiplexes Several radio programs called services can be broadcast simultaneously in each ensemble This means that you can choose between several radio programs within one frequency In addition to the audio signal service information is also broadcast and displayed in the front panel display of this unit Part of the service information is text data information called Dynamic Label Segment DLS For more information see page 17 With DAB there is no need to remember channel frequencies All broadcasts are selected by simply selecting the service name Notes Be sure to check DAB coverage in your area in that not all Ensemble x areas are currently being covered For a list of nationwide DAB statuses and worldwide DAB frequencies check WorldDAB online at http www worlddab org The sound quality and service information are controlled by the DAB broadcaster not this unit Not all DAB broadcasters transmit service information DAB signals are broadcast
18. and antennas 248 Tuning into the preset 5 5 23 Connecting the DAB 8 Displaying the Radio Data System information 23 Connecting the power 9 Turning on and off the eee 9 ADDITIONAL INFORMATION Troubleshooting sccsccssssssssssssscsscesssssesseeees 25 Operating with Yamaha AV amplifier remote controls Specifications cccsccrsccccssssessocsesescescsescesssesees 1 2 NOILONGOULNI NOUY9Yd29d 2 99 SE DAB Digital Audio Broadcasting tuner Sophisticated FM AM tuner DAB Digital Audio Broadcasting tuning capability 30 station each band FM AM preset tuning DLS Dynamic Label Segment information display Automatic preset tuning Automatic scanning function to locate all DAB services in your Radio Data System tuning capability area Radio Data System text information display capability Tuning aid function to optimize DAB reception Radio Data System program type seek tuning capability 99 DAB service preset tuning Coaxial and optical digital audio output capability for DAB General audio signals 2 line information message display signals Digital Audio Broadcasting This receiver supports DAB tuning About this manual indicates a tip for your operation Some opera
19. c scanning operation see page 11 use Signal Q display to check the signal quality of the currently received DAB service see page 18 Notes Be sure to check the DAB coverage in your area in that not all areas are currently being covered For a list of nationwide DAB statuses and worldwide DAB frequencies check WorldDAB online at http www worlddab org If the DAB signal is weak use a commercially available outdoor DAB antenna for better reception Connecting the FM and AM antennas Both FM and AM indoor antennas are supplied with this unit In general these antennas should provide sufficient signal strength Connect each antenna correctly to the designated terminals Notes The AM loop antenna should be placed away from this unit A properly installed outdoor antenna provides clearer reception than an indoor one If you experience poor reception quality install an outdoor antenna Consult the nearest authorized Yamaha dealer or service center about outdoor antennas The AM loop antenna should always be connected even if an outdoor AM antenna is connected to this unit wire of the AM loop antenna does not have any polarity 8 En Indoor FM AM loop antenna antenna supplied supplied Outdoor AM antenna Use a5 to 10 m of vinyl covered wire extended outdoors from a window Vs Ground For maximum safety and minimum interference connect the antenna GND t
20. commercially available to connect the DIGITAL DAB OPTICAL OUTPUT jack of this unit and the digital OPTICAL input jack of your amplifier NOUY9Yd29d Note DAB audio signals are also output at the ANALOG OUTPUT jack of this unit in an analog format FM or AM audio signals are not output at the DIGITAL DAB OUTPUT jacks 37 282 If you want to connect this unit to Yamaha AV amplifier such as DSP AX861SE via digital audio connection coaxial or optical use the input output assignment feature of the AV amplifier to assign a coaxial or optical digital audio input jack of your AV amplifier to TUNER Refer to the owner s manual of your AV amplifier for details ANTENNA Audio pin cable Supplied Optical cable Digital audio pin cable Supplied 1 1 1 1 aa Q gre aaa DIGITAL DIGITAL INPUT INPUT indicates recommended connections indicates alternative connections Amplifier 7 Connections Connecting the DAB antenna Connect the supplied indoor DAB antenna to the DAB antenna terminal on the rear panel and attach the indoor DAB antenna vertically on the wall Indoor DAB antenna supplied ANTENNA 27 22 It is recommended that you use the tuning aid function see page 14 when you set up the indoor DAB antenna in order to maximize DAB reception capability After the automati
21. e TV set whining noises Remote control See Problem Cause Remedy page The remote control does not Wrong distance or angle The remote control functions within a 3 work nor function properly maximum range of 6 m and no more than 30 degrees off axis from the front panel Direct sunlight or lighting from an inverter Reposition this unit type of fluorescent lamp etc is striking the remote control sensor of this unit The batteries are weak Replace all batteries 3 26 En Even if the remote control code is correctly set there are some models that do not respond to the remote control Troubleshooting General Problem This unit fails to turn on when STANDBY ON is pressed Cause The power cord is not connected or the plug is not completely inserted Remedy Connect the power cord firmly See page This unit has been exposed to a strong external electric shock such as lightning or strong static electricity Disconnect the power cord plug it back in after 30 seconds then use it normally A humming sound can be heard Incorrect cable connections Firmly connect the audio connection cord plugs If the problem persists the cables may be defective This unit does not operate properly Resetting the system The internal microcomputer has been frozen by an external electric shock such as lightning or excessive static electricity or by a power supply with lo
22. en when the other Radio Data System display modes are available In case of poor reception condition press FM MODE on the front panel or remote control to select the monaural reception mode see page 19 If the signal strength is weakened by external interference while this unit is receiving the Radio Data System data the reception may be cut off unexpectedly When the RADIO TEXT mode is selected this unit can display the program information by a maximum of 128 alphanumeric characters including the umlaut symbol Unavailable characters are displayed with the _ underscore The displayed information scrolls continuously 24 En Troubleshooting Refer to the table below when this unit does not function properly If the problem you are experiencing is not listed below or if the instruction below does not help turn off this unit disconnect the power cable and contact the nearest authorized Yamaha dealer or service center Tuner Problem Cannot tune into any DAB services Cause The automatic scanning operations were not performed or the DAB registry list needs to be updated Remedy Perform the automatic scanning operations See page 12 There is no DAB coverage in your area Check with your dealer or WorldDAB online at http www worlddab org for a listing of the DAB coverage in your area The DAB signals are too weak Use a high quality outdoor DAB antenna T
23. erminal to a good earth ground A good earth ground is a metal stake driven into moist earth Assembling the supplied AM loop antenna Connecting the wire of the AM loop antenna Press and hold Insert Release Connections Connecting the power cable Turning on and off the power Plug the supplied AC power cable into AC IN after all Turning on this unit other connections are complete then plug the AC power cable into an AC wall outlet Press STANDBY ON or POWER to turn on this unit YAMAHA 55505 STANDBY ON NOUY9Yd29d To the AC wall outlet Set this unit to the standby mode Memory back up Press STANDBY ON or POWER to set this unit to the standby mode In the standby mode this unit consumes a small amount of power in order to receive infrared signals from the remote control The memory back up circuit prevents the stored data from being lost even if this unit is in the standby mode However the stored data will be lost in case the power cable is disconnected from the AC wall outlet or if the power supply is cut off for more than one week 9 En DAB Digital Audio Broadcasting tuning DAB Digital Audio Broadcasting also known as digital radio is a new way of radio broadcasting DAB is broadcast using digital signals instead of analog signals resulting in near CD quality sound Analog sign
24. g with the station frequency 22 En FM AM tuning Tuning into the preset stations Displaying the Radio Data System information Use this feature to display the five types of the Radio Data System information PROGRAM SERVICE CLOCK TIME PROGRAM TYPE RADIO TEXT and TRAFFIC ANNOUNCE YAMAHA You can tune into any desired station simply by selecting the preset station group and under which it was stored YAMAHA BAND TUNING NODE TUNING 09090000606 BAND 5 buttons Eh TUNING H TUNING A V MODE INFO TEXT Browsing the preset station list 2 1 press BAND on the front panel or remote 1 Tune into the desired Radio Data System 5 control repeatedly to select the reception broadcasting station band FM AM You can use PTY SEEK mode to tune into the desired Radio Data System broadcasting station from the 2 Press TUNING MODE on the front panel or preset ones remote conirol repeatedly to select Preset tune 2 Press INFO TEXT on the front panel or remote control repeatedly to select the 3 Rotate PRESET TUNING or press desired Radio Data System display mode TUNING repeatedly to select the
25. he Troubleshooting section on common operating errors before concluding that this unit is faulty 18 Before moving this unit press STANDBY ON to set this unit in the standby mode and disconnect the AC power plug from the wall outlet 19 The batteries shall not be exposed to excessive heat such as sunshine fire or like En WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE This unit is not disconnected from the AC power source as long as it is connected to the wall outlet even if this unit itself is turned off by STANDBY ON This state is called the standby mode For U K customers If the socket outlets in the home are not suitable for the plug supplied with this appliance it should be cut off and an appropriate 3 pin plug fitted For details refer to the instructions described below Note The plug severed from the mains lead must be destroyed as a plug with bared flexible cord is hazardous if engaged in a live socket outlet Special Instructions for U K Model IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE Blue NEUTRAL Brown LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured BLUE must be connected to the terminal which is marked with the
26. he FM radio wave reception mode stereo or monaural when this unit is in the FM tuning mode see page 19 DISPLAY CLEAR Deletes the preset memory of the currently selected preset station number see pages 16 and 22 00 AUTO SCAN Starts the automatic scanning function when this unit is in the DAB tuning mode see page 11 e Some functions may not be available depending on the remote controls If you use the remote control supplied with other Yamaha AV amplifiers than DSP AX761 or DSP AX861SE refer to the owners manuals of your AV amplifier 28 En Specifications AUDIO SECTION e Output Level Impedance fixed DAB 0 dB Full 2 0 V 1 2 FM 40 kHz Dev 1kHz 1 0 V 1 2 30 mod 1 KHZ see 0 36 V 1 2 DAB SECTION e Tuning Range Band TM 174 to 240 MHz Band T 1452 to 1492 MHz e Sensitivity 98 dBm IR l HT 93 dBm Selectivity for adjacent channel Band L Band e Signal to Noise Ratio sese 95 dB Total Harmonic Distortion sss esse eee eee 0 01 e Stereo Separation 1 KHZ 85dB Frequency Response 20 Hz to 20 kHz 0 5 dB 1 0 dB e Antenna Input unbalanced 2 500 SECTION e Tuning 87 50 to 108 00 MHz 50 dB Quieting Sensitivity IHF 100 mod eee 3 2
27. he automatic scanning operations are not successful DAB The DAB antenna may not be connected Make sure the DAB antenna is firmly connected The DAB signals are too weak Use a high quality outdoor DAB antenna There is no DAB coverage in your area Check with your dealer or WorldDAB online at http www worlddab org for a listing of the DAB coverage in your area The DAB service reception is weak The positioning of the indoor DAB antenna and or this unit is not optimal for DAB reception Use the tuning aid feature to locate the best positioning of the DAB antenna and this unit for optimal DAB reception 14 The DAB signals are too weak Use a high quality outdoor DAB antenna There is noise interference e g hiss or crackle The indoor DAB antenna needs to be repositioned Readjust the position of the indoor DAB antenna gt og DS So SE The DAB signals are too weak Use a high quality outdoor DAB antenna The DAB service information does not appear or is inaccurate The DAB service may be temporarily out of service or the DAB service information is not provided by the DAB broadcaster Contact the DAB broadcaster 25 En Troubleshooting See Problem Cause Remedy page FM stereo reception is The characteristics of FM stereo Check the antenna connections 8 noisy broadcasts may ca
28. ic National Music Other Music Folk Music Documentary 20 En Alarm Test Alarm Alarm FM AM tuning 4 Press SELECT on the front panel or remote Using the preset station feature control to confirm the selection of the program type You can then recall any preset station easily by selecting the preset station 5 Rotate PRESET TUNING or press TUNING to start searching for the corresponding Radio Data System stations This unit starts searching for the Radio Data System stations corresponding to the selected program type MEMORY BAND PRESET TUNING While this unit is searching the Radio Data System stations Search and the name of the selected O O OIS program type appear alternately in the front panel buttons _ MEMORY OJO _ crear Once this unit finds the Radio Data System station TUNING A V corresponding to the selected program type this unit stops searching tas S Automatic station preset ZINS gt You can use the automatic station preset feature to store AM and FM stations with strong signals up to 30 of those stations for each band in order 56 To stop searching for stations press INFO TEXT on the E 1 press BAND on the f
29. lected DAB channel signal gets stronger Signal strength indicator of the DAB channel Channel label Ensemble level vie 592 No stations Available when the signal of the selected DAB channel is too weak Adjust the orientation of the connected DAB antenna or try tuning into another DAB service 14 En Dynamic range control Use this feature to compress the dynamic range of the DAB broadcast This is especially useful when you listen to a DAB service in a noisy environment or at a low volume at night 1 Prune list Select Dynamic range in the DAB setup menu See page 13 for details The following message appears in the front panel display Current dynamic range setting Selected dynamic range setting Rotate PRESET TUNING or press TUNING Y repeatedly to select the desired dynamic range control setting Choice Function 0 Default setting This unit does not compress the dynamic range 1 2 Medium dynamic range compression 1 Maximum dynamic range compression Use this feature to delete a group of the out of service DAB ensembles and services from the DAB registry list 1 Select Prune list in the DAB setup menu See page 13 for details The following message appears in the front panel display Rotate PRESET TUNING or press TUNING Y repeatedly to select select OK SELECT and then press SELECT This unit deletes a
30. letter N or coloured BLACK The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED Making sure that neither core is connected to the earth terminal of the three pin plug This symbol mark is according to the EU directive 2002 96 EC This symbol mark means that electrical and electronic equipment at their end of life should be disposed of separately from your household waste Please act according to your local rules and do not dispose of your old products with your normal household waste INTRODUCTION Features sree tetri b endoa Zyra tette 2 DAB Digital Audio Broadcasting tuning 10 Getting started TH 3 Preparing the DAB 11 Controls and 8 2 4 DAB Frontpanel 4 Using the DAB functions Remote control 5 Preset DAB services Rear panel 6 DAB service information Front panel display 2 20 6 DAB frequency 22 42221 18 FM AM 4 19 Automatic and manual 10105 19 Selecting the Radio Data System program type LS p T TTT 7 PTY SEEK mode 20 Connecting this unit to an amplifier 52 Using the preset station feature 921 Connecting the
31. ll the inactive DAB ensembles and services and exits from the DAB setup menu 27 22 To cancel the operation select Cancel DAB Digital Audio Broadcasting tuning Preset DAB services You can use the DAB preset tuning feature to store preset DAB services in the memory You can then recall any preset service easily by selecting the preset service number assigned to the corresponding DAB service You can preset up to 99 DAB services in the memory YAMAHA 0990666 2 buttons Storing DAB services 1 Tune into the desired DAB service See page 12 for tuning instructions 2 Press MEMORY on the front panel or remote control This unit is in the preset station memory mode Following message appears in the front panel display Name of the current DAB service r Preset number Note Perform the next operation within 5 seconds If you do not perform any operations after the operation of step 2 this unit automatically cancels the preset memory mode 3 Rotate the PRESET TUNING or press the numeric buttons to select the desired preset number ale 592 To enter numbers less than 10 i e 1 to 9 by using the numeric buttons on the remote control press the desired number and then ENTER or press 0 and then enter the desired number 4 Press MEMORYon the front panel or remote cont
32. n 2 mode 1 selector to TVVOL CH VOLUME z SOURCE BIS Leven sgr menu 6 PURE DIRECT 4 o m FREOTEXT EON ODE PTY SEEK START OFF ON MACRO LEARN CLEAR RENANE R Las YAMAHA Notes ata 592 When a button is pressed the remote control outputs the same signal as the signal output by pressing the button having the name printed inside the parentheses of the remote control unit supplied with this unit PRESET TUNING A V TUNING A V Selects the preset DAB FM AM stations or services when this unit is in the preset tuning mode e Selects the DAB or AM stations or services when this unit is not in the preset tuning mode 2 RETURN MEMORY Sets this unit to the preset station memory mode when this unit is in the DAB tuning mode see page 15 or FM AM tuning mode see pages 21 and 22 Numeric buttons ENT Numeric buttons ENTER Selects the desired preset DAB services see page 15 or FM AM stations see page 23 INFO TEXT Turns on and changes the Radio Data System or DAB service information in the front panel display ENTER gt SELECT TUNING MODE Selects the tuning mode automatic manual or preset tuning when this unit is in the FM AM tuning mode 6 MENU FUNCTION FM MODE Activates the DAB function setup mode when this unit is in the DAB tuning mode see page 13 e Switches t
33. nd AM stations to the preset station memory manually 1 Select the desired preset station number OE _ Refer to Tuning into the preset stations on page 23 1 Tune into the desired FM AM station for details See page 19 for tuning instructions 2 Press CLEAR the remote control 2 Press MEMORY on the front panel or The selected preset station number flashes in the front remote control panel display The preset station number flashes in the front panel display for 5 seconds 3 Rotate PRESET TUNING on the front panel or press the numeric buttons on the ad remote control to select the desired preset station number while the preset station Note number flashes Perform the next operation within 5 seconds after pressing CLEAR If you do not press CLEAR within 5 seconds the clearing is canceled 3 Press CLEAR to confirm Preset station number Preset 1 clear appears in the front panel display Note Perform the next operation within 5 seconds after selecting the preset station number If you do not press MEMORY within 5 seconds the preset is canceled 4 Press MEMORY on the front panel or remote control again to confirm the preset Notes Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number The reception mode stereo or monaural is stored alon
34. ny cause beyond Yamaha s control 5 Defects of the system into which this product is incorporated and or incompatibility with third party products 6 Use of a product imported into the EEA and or Switzerland not by Yamaha where that product does not conform to the technical or safety standards of the country of use and or to the standard specification of a product sold by Yamaha in the EEA and or Switzerland 7 Non AV Audio Visual related products Products subject to Yamaha AV Guarantee Statement are defined in our website at http www yamaha hifi com http www yamaha uk com for U K resident 5 Where the guarantee differs between the country of purchase and the country of use of the product the guarantee of the country of use shall apply 6 Yamaha may not be held responsible for any losses or damages whether direct consequential or otherwise save for the repair or replacement of the product 7 Please backup any custom settings or data as Yamaha may not be held responsible for any alteration or loss to such settings or data 8 This guarantee does not affect the consumer s statutory rights under applicable national laws in force or the consumer s rights against the dealer arising from their sales purchase contract 2 En Getting started Checking the supplied accessories Check that you received all of the following parts Remote control AM loop antenna Ot OF OF Gi
35. ode see page 15 or FM AM tuning mode see pages 21 and 22 BAND Selects the reception band DAB FM or AM 4 En PUNCT FM MODE TUNING MODE INFO TEXT Turns on and changes the Radio Data System see page 23 or DAB service information see page 17 in the front panel display FUNCTION FM MODE Activates the DAB function setting mode when this unit is in the DAB tuning mode see page 13 Switches the FM radio wave reception mode stereo or monaural when this unit is in the FM tuning mode see page 19 Press and hold FUNCTION FM MODE for 5 seconds to set this unit to the initial factory settings see page 27 SELECT TUNING MODE Selects the tuning mode automatic manual or preset tuning when this unit is in the FM AM tuning mode Controls and functions Remote control DSP AX861SE See page 28 for details Operating with Yamaha AV amplifier remote controls You can also operate this unit by using the remote control supplied with your Yamaha AV amplifier such as Infrared transmitter Outputs infrared controls signals Aim this transmitter at the component you want to operate Numeric buttons ENTER Selects the desired preset DAB services see page 15 or FM AM stations see page 23 3 FUNCTION FM MODE Activates the DAB function setup mode when this unit is in the DAB tuning mode see page 13 e Switches the FM radio wave reception mode stereo
36. onding preset service number The DAB service currently being received is then displayed in the front panel display The SECONDARY indicator lights up in the front panel display when this unit is receiving a secondary service Off air appears when this unit cannot received specified DAB service 16 En Clearing the preset DAB service Use the feature to clear the preset DAB service 1 Select the preset number you want to clear the preset DAB service 2 Press CLEAR on the remote control The selected preset number flashes in the front panel display If you want to cancel the clear operation wait 5 seconds so that this unit automatically cancels the preset clear mode 3 Press CLEAR again to confirm the clear Preset 1 clear example appears in the front panel display DAB Digital Audio Broadcasting tuning DAB service information Use this feature to display various information about the DAB service currently being received YAMAHA 19 INFO TEXT 7 0 Press INFO TEXTon the front panel or remote control repeatedly while a DAB service is currently being broadcast Each time you press INFO TEXT information displayed in the front panel display changes in the following order Display mode Display contents example DLS Dynamic label segment
37. operation If the automatic scanning operation is not successful No stations Available and then following display appears in the front panel display Rotate PRESET TUNING or press SELECT repeatedly to select Tune aid or e Select Tune aid to check the signal strength of the DAB channel that is broadcast from the nearest station see page 14 e Select Autoscan to carry out the automatic scanning operation again For further details about problems and their remedies refer to the Tuner section in Troubleshooting on page 25 Using the automatic scanning function Use the automatic scanning function to scan the DAB service again This feature is useful when you want to register new DAB services or you want to register the DAB services broadcast in another location You can select the scanning frequency range as follows Full range scanning This unit scans the entire range of Band III and L Band see page 18 Press and hold AUTO SCAN on the front panel or remote control for 3 seconds This unit starts the full range scanning Full appears in the front panel display Once this unit has finished scanning this unit is tuned into the first DAB station in the DAB service registry list Local range scanning This unit scans the limited range of Band Press AUTO SCAN on the front panel or remote control briefly
38. per tablecloth curtain etc in order not to obstruct heat radiation If the temperature inside this unit rises it may cause fire damage to this unit and or personal injury 7 Do not plug in this unit to a wall outlet until all connections are complete 8 Do not operate this unit upside down It may overheat possibly causing damage 9 Do not use force on switches knobs and or cords 10 When disconnecting the power cable from the wall outlet grasp the plug do not pull the cord 11 Do not clean this unit with chemical solvents this might damage the finish Use a clean dry cloth 12 Only voltage specified on this unit must be used Using this unit with a higher voltage than specified is dangerous and may cause fire damage to this unit and or personal injury Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified 13 To prevent damage by lightning keep the power cord and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm 14 Do not attempt to modify or fix this unit Contact qualified Yamaha service personnel when any service is needed The cabinet should never be opened for any reasons 15 When not planning to use this unit for long periods of time i e vacation disconnect the AC power plug from the wall outlet 16 Install this unit near the AC outlet and where the AC power plug can be reached easily 17 Be sure to read t
39. rol to confirm the preset Note Any stored DAB service data existing under a preset service number is cleared when you store a new DAB service under the same preset service number To clear the preset DAB service refer to Clearing the preset DAB service on page 16 15 En ONINNL DAB Digital Audio Broadcasting tuning Recalling the preset DAB services YAMAHA 5550555 FUNCTION SELECT PRESET TUNING 6225 buttons 65 Q CLEAR FONCTION _ a TUNING A V i aq 1 press FUNCTION on the front panel or remote control to select Preset tune and then press SELECT 2 Rotate PRESET TUNING or press TUNING V repeatedly to select the desired preset number and then press SELECT This unit is tuned into the selected preset station Selecting the desired preset station directly Press the numeric buttons on the remote control to enter the number of the desired preset DAB service This unit is tuned into the selected preset station 2 To enter numbers less 10 i e 1 to 9 by using the numeric buttons on the remote control press the desired number and then ENTER or press 0 and then enter the desired number Preset 01 empty example appears briefly when no preset DAB service is assigned to the corresp
40. ront panel or remote front panel or remote control control repeatedly to select the reception Notes band FM AM If the station found is not the one you desire this unit _ automatically tunes into the last tuned station 2 Press and hold MEMORY on the front panel or remote control for more than 3 seconds This unit starts searching of the stations with strong signals and storing the stations to the preset station memory of this unit automatically Auto memory appears in the front panel display while this unit is searching the stations When automatic preset tuning is completed the front panel display shows the frequency of the station preset to 01 50 2 After you perform the automatic preset station memory for or FM also perform the operation for another band AM or FM Notes If no station is found this unit is tuned into the last tuned station Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number Only FM and AM stations with sufficient signal strength are stored automatically by automatic preset tuning If the station you want to store is weak in signal strength tune into it manually and store it as described in Manual station preset on the next page 21 En FM AM tuning Manual station preset Clearing the preset station Use this feature to store the desired FM a
41. tation that this unit is tuned into provides the Radio Data System information the program service information that this unit currently receives appears in the front panel display Manual tuning If the signal received from the station you want to select is weak tune into it manually 1 Press BAND on the front panel or remote control repeatedly to select the reception band FM AM 2 Press TUNING MODE on the front panel remote control repeatedly to select Manual tune 3 Rotate PRESET TUNING on the front panel or press TUNING on the remote control repeatedly to select the desired frequency When this unit is tuned into a station the TUNED indicator lights up and the frequency of the received station is shown in the front panel display Selecting the FM radio wave reception mode If the signal received from the station and the quality of the sound is not good set the FM radio wave reception mode to the monaural tuning mode Press FM MODE on the front panel or remote control repeatedly to select the stereo mode or monaural mode when this unit is tuned into an FM radio station e When this unit is in the stereo tuning mode the STEREO indicator lights up in the front panel display When this unit is in the monaural tuning mode the STEREO indicator disappears Note Even if this unit is in the stereo tuning mode the STEREO indicator does not light up when the currently
42. the best reception adjust the orientation of the DAB antenna so that a value of 80 or more is displayed for the desired DAB service DAB module firmware version Displays the version of the DAB module firmware This information is for factory use only The front panel display can indicate to 16 alphanumeric characters at once The dynamic label segment scrolls in a continuous manner and the service label ensemble label and program type scroll at once 17 En ONINNL DAB Digital Audio Broadcasting tuning DAB frequency information pes eis ae 229 072 MHz 12D Band Ill 230 784 MHz 13 Note 232 496 MHZ 13B 234 208 MHz 13C When you perform the local range scanning this unit scans only within the frequencies marked with an asterisk in the 235 776 MHz 13D following table see page 11 237 488 MHz 13E Frequency Channel label 239 200 MHz 13F 174 928 MHz 5A 176 640 MHz 5B L Band 178 352 5 E Frequency Channel label 180 064 MHz 5D 1452 960 MHz LA 181 936 MHz 6A 1454 672 MHz LB 183 648 MHz 6B 1456 384 MHz 183 360 MHz 0G 1458 096 MHz LD 187 072 MHz 6D 1459 808 MHz LE 188 928 MHz 7 1461 520 MHz LF 190 640 MHz 7B 1463 232 MHz LG 192 352 7 7 1464 944 MHz LH 194 064 7D S Z 1466 656 MHz LI 195
43. the name of the service when you set Station order to Favourite see page 13 If the selected DAB service has the secondary service gt gt appears in the right of the name of the service If the selected DAB service is a secondary service lt lt appears in the left of the name of the service If this unit cannot receive signals of the selected DAB service 2 appears in the left of the name of the service 3 Press SELECT on the front panel or remote control to confirm the selection This unit is tuned into the selected DAB service Notes When the selected DAB service has a secondary service the SECONDARY indicator flashes in the front panel for 5 seconds and the selected DAB service is a secondary DAB service of a DAB service the SECONDARY indicator lights up This unit returns to the corresponding primary service when the secondary service becomes timed out Off air appears when this unit can not received specified DAB service You can change the order of the DAB services listen the DAB service registry listed by using the Station order function see page 13 DAB Digital Audio Broadcasting tuning e Station order Etat Using the DAB functions You can change the order of the registered DAB services Use this feature to set the DAB functions 1 Press BAND on the front panel or remote control repeatedly to select DAB as the 1 Press BAND
44. tions can be performed by using either the buttons on the front panel or the ones on the remote control In case the button names differ between the front panel and the remote control the button name on the remote control is given in parentheses This manual is printed prior to production Design and specifications are subject to change in part as a result of improvements etc In case of differences between the manual and product the product has priority Limited Guarantee for European Economic Area EEA and Switzerland Thank you for having chosen a Yamaha product In the unlikely event that your Yamaha product needs guarantee service please contact the dealer from whom it was purchased If you experience any difficulty please contact Yamaha representative office in your country You can find full details on our website http www yamaha hifi com or http www yamaha uk com for U K resident The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase Yamaha undertakes subject to the conditions listed below to have the faulty product or any part s repaired or replaced at Yamaha s discretion without any charge for parts or labour Yamaha reserves the right to replace a product with that of a similar kind and or value and condition where a model has been discontinued or is considered uneconomic to repair Conditions 1 The original invoice or s
45. use this problem when the transmitter is too far away or Try using a high quality directional FM the antenna input is poor antenna Use the manual tuning method 19 There is distortion and There is multi path interference Adjust the antenna position to eliminate clear reception cannot multi path interference be obtained even with a good FM antenna The desired station The signal is too weak Use a high quality directional FM antenna cannot be tuned into with the automatic Use the manual tuning method 22 tuning method Previously preset This unit has been disconnected for a Set preset stations stations can no longer long period 21 be tuned into The Radio Data System Radio Data System information is information does not not provided by the radio station appear The signal is too weak Use a high quality directional FM antenna desired station The signal is weak or the antenna Tighten the AM loop antenna connections cannot be tuned into connections are loose and orient it for the best reception with the automatic tuning method Use the manual tuning method 19 There are continuous Noise can result from lightning Use an outdoor antenna and a ground wire crackling and hissing fluorescent lamps motors thermostats This will help somewhat but it is difficult to noises and other electrical equipment eliminate all noise There are buzzing and A TV set is being used nearby Move this unit away from th
46. w voltage Use this feature to set this unit to the initial factory settings This unit also clears all preset stations and services Press and hold FUNCTION FM MODE on the front panel for more than 5 seconds Factory reset appears in the front panel display and then this unit is set to the standby mode automatically Disconnect the AC power cord from the outlet and then plug it in again after about 30 seconds 2 og So SE 27 En Operating with Yamaha AV amplifier remote controls You can operate this unit by using the remote control supplied with your Yamaha AV amplifier such as DSP AX861SE The remote control for the AV amplifier is designed assuming that it is used with tuners and receivers previously released As a result the names printed on the remote control buttons sometimes differ from the functions of this unit activated by them When the remote control for the DSP AX761 DSP AX861SE is used this unit is controlled as below POWER POWER STANDBY POWER e SCENE PHONO MULTICHIN V AUXDOCK TUNER MD CD R Set to S TS SELECT operatio
Download Pdf Manuals
Related Search