DLO Micro Automobile Accessories User Manual
Contents
1. AUDIO LEVEL Audio Level gives you the option of selecting the volume output level that fits your particular audio Turn the dial right or left to select from Low Medium or High LISTENING MODE Listening Mode allows you to choose between Mono and Stereo TransDock micro defaults to Mono for optimal transmitter performance To learn more about Listening Mode please read Getting the Best Sound Quality with TransDock micro pg 13 BRIGHTNESS TIME Brightness Time allows you to change the length of time that the TransDock micro s display screen stays active Scroll through to select Always On 2 seconds 5 seconds 10 seconds 15 seconds or 20 seconds BRIGHTNESS LEVEL Brightness Level controls the brightness of the OLED display while TransDock micro is active Turn the dial right for higher intensity and left for lower intensity DIM LEVEL Dim Level controls the brightness of the OLED display while TransDock micro is inactive Turn the dial right for higher intensity and left for lower intensity or off 12 DLO TRANSDOCK MICRO USER GUIDE RESET SETTINGS Reset Settings allows you to revert back to the factory settings To do so press the dial when on Reset Settings TransDock micro will ask you if you are sure you would like to reset your settings Press the dial once to accept or turn right or left to return to the Settings Menu Getting the Best Sound Quality with TransDock micro e Use IntelliTune to automatically2. Press the center button to exit the Settings Menu NOTE TransDock micro will automatically exit the Settings Menu after a few seconds of inactivity Settings include PRESET STORE Preset Store allows you to save up to four preset stations The default presets are 88 1 94 9 100 9 and 107 9 To store your own preset stations follow these simple steps 1 Using the dial tune TransDock micro to the station you d like to set turning right to tune to higher stations and left to tune to lower stations 2 Press and hold the dial to enter the Settings Menu 3 Once in the Settings Menu scroll to Preset Store and press the dial to select Next scroll to and select the preset number SET 1 SET 2 SET 3 or SET 4 and press to select 10 DLO TRANSDOCK MICRO USER GUIDE 4 Repeat steps 1 3 to store the remaining presets NOTE Your new preset will override the preset that was last saved including the default presets PRESET MODE Preset Mode gives you the option to scroll through your presets in Manual Mode To turn Preset Mode on follow these simple steps 1 Press and hold the dial to enter the Settings Menu 2 Scroll to Preset Mode and press the dial to select Then choose Preset Mode On and press to select Now you can scroll through the four presets P1 P2 P3 P4 in Manual Mode 3 Leave TransDock micro on the desired preset and tune your radio to the cor responding freguency to begin broadcasting 111
3. DC Input Current lt 300mA DC12V 16V Replaceable Fuse 250V T2AH TEMPERATURE Storage Temperature 10 to 120 F 23 to 49 C Operating Temperature 4 to 113 F 20 to 45 C 16 DLO TRANSDOCK MICRO USER GUIDE For Customer Service please visit http www dlo com or call 1 800 233 8413 One Year Limited Warranty DLO warrants that this product shall be free from defects in material workmanship and assembly under normal use in accordance with the specifications and warnings for a period of one year from the date of purchase This warranty extends only to the original purchaser of the product and is not transferable To exercise your rights under this warranty you must provide proof of purchase in the form of an original sales receipt that shows the product name and the date of purchase For customer support or to obtain warranty service please visit www dlo com THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES DLO liability is limited to repair or at its sole option replacement of the product Incidental special and consequential damages are disclaimed where permitted by law This warranty gives you specific legal rights You may also have other rights that vary from state to state 117 Federal Communications Commission Interference Statement This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference
4. TransDock micro USER MANUAL 2009 KONINKLIJKE PHILIPS ELECTRONICS N V The DLO logo Digital Lifestyle Outfitters IntelliTune and TransDock micro are trademarks of Philips Consumer Lifestyle iPod is a trademark of Apple Inc registered in the U S and other countries C tM Printed in China M97878 080129 H ae 2 DLO TRANSDOCK MICRO USER GUIDE Quick Start 04 Using TransDock micro 06 About TransDock micro 06 Setting Up Your TransDock micro 06 Turning TransDock micro On and Off 07 Finding Empty Radio Frequencies Using IntelliTune 08 Manually Finding Empty Radio Frequencies 08 Settings Features 10 TransDock micro Settings 10 Getting the Best Sound Quality with TransDock micro 13 Frequently Asked Questions 14 Tech Specs 16 Warranty Service 17 FCC Statement 18 Thanks for purchasing the DLO TransDock micro We will get you up and running in a few easy steps For more detailed instructions please read Using TransDock micro pg 6 1 Plug your TransDock micro into your auto power outlet 2 Connect your iPod to TransDock micro by inserting the Connector Cable into the iPod dock connector Your iPod will now begin charging if your car is on NOTE The iPod will automatically pause playback when TransDock micro is powered off 3 Press the dial on TransDock micro to activate IntelliTune IntelliTune will au tomatically find the optimal frequency to broadcast your iPod over your car s FM
5. adio to that station and begin enjoying your iPod music over your car stereo Manually Finding Empty Radio Frequencies TransDock micro also allows you to manually tune the transmitter to desired FM frequencies To do so simply turn TransDock micro s dial to the right to tune to higher stations and left to tune to lower stations See drawing B 8 DLO TRANSDOCK MICRO USER GUIDE Tips for manually finding an empty station e Be sure to search the entire spectrum of FM frequencies from 88 1 to 107 9 Don t just look to the low end of the dial There are often empty FM stations in the 100 s that work well e When using scan seek on your car s radio if your tuner stops on 101 and then jumps to 103 look in the 102 frequencies for empty stations e Try tuning to a strong station then backing down two frequencies for example 103 5 to 103 1 You can often find empty frequencies this way If that frequency is taken scan to the next station and try again NOTE You can also visit www dlo com openFM to find the best FM frequencies in your area TransDock micro Settings To enter the Settings Menu press and hold the dial Then turn the dial to scroll through the various settings and press the dial to enter your desired setting Turn the dial to the right or left to view the chosen setting options and press the dial to confirm your selection Once you ve made your selection you will return to the Settings Menu
6. and 2 this device must accept any interference received including interference that may cause undesired operation CAUTION Changes or modifications not expressly approved by the party respon sible for compliance could void the user s authority to operate the eguipment 18 DLO TRANSDOCK MICRO USER GUIDE 119 D Thanks for purchasing TransDock micro Enjoy the Ride
7. find the optimal frequency to broadcast your iPod over your car s FM stereo Then tune your car s FM stereo to the fre quency displayed on TransDock micro e Choosing between Mono and Stereo in Listening Mode Mono allows for much better transmitter performance while Stereo allows for the best sonic musical performance NOTE If static or distortion increases switch to Mono for the best transmit ter performance possible e To get the best initial performance from TransDock micro it is very important that you set your iPod EQ to Off and adjust your car s bass and treble controls to 0 Then you can experiment with adding bass and treble to your desired level But we highly recommend that you start with everything at 0 113 My music is playing but there seems to be a lot of static Use IntelliTune to automatically find the optimal frequency to broadcast your iPod over your car s FM stereo Then tune your car s FM stereo to the frequency displayed on TransDock micro You may also try setting the Listening Mode to Mono which will improve the clarity of TransDock micro s signal My radio will only scan seek to occupied FM stations Many car radios default to scan seek mode for tuning so they automatically tune to a radio station Most of these radios can be switched to manual tuning consult your car or radio manual on how to do this My music sounds overdriven and distorted Be sure that the FM station you re using is sti
8. ll unoccupied as you drive through different areas FM signals can intrude on an unused frequency Be sure to set your iPod EQ to Off and adjust your car s bass and treble controls to 0 Then you can experiment with adding bass and treble to your desired level However we highly recommend that you start with everything at 0 14 DLO TRANSDOCK MICRO USER GUIDE My iPod does not appear to be charging when it s connected to TransDock micro Make sure TransDock micro is securely positioned in your car s power outlet You may also check to ensure that the connector cable is all the way into the iPod s dock connector If leave TransDock micro plugged into my car s power outlet will it drain my car battery Probably not but it s always a good idea to unplug anything when leaving your car for a long period of time NOTE Your TransDock micro will continue to draw power from your car s battery as long as a device is attached Can use TransDock micro with other devices No TransDock micro is designed specifically for use with iPods 115 FM TRANSMITTER Modulation FM Stereo Default Preset Frequencies MHz 88 1 94 9 100 9 and 107 9 Frequency Adjustment 0 2 MHz per step Frequency Response 20Hz 15KHz Transmitter Range Up to 27 feet 8 2M Tuning Digitally controlled crystal oscillator International frequency compatible CONNECTIONS 30 Pin iPod Dock Connector Cable Length 48 POWER Input Voltage 12 16 V
9. o activate TransDock micro s IntelliTune feature press the dial TransDock micro will display the word INTELLI TUNE as it searches for the optimal freguency This should 6 DLO TRANSDOCK MICRO USER GUIDE only take a few seconds Once the search is complete the display will instruct you to tune your radio to the frequency found by IntelliTune 5 Match the FM station on your radio with the corresponding FM frequency shown on your TransDock micro s display Click Play on your iPod to enjoy your music over your car s FM radio 6 To control the overall volume of your music while using TransDock micro use the car radio s volume control not the iPod volume Turning TransDock micro On and Off TransDock micro will turn on and off automatically with your car To manually turn TransDock micro on or off while your car power is on press and hold the dial for approximately 5 seconds Finding Empty Radio Freguencies Using IntelliTune If you live in a big city with a lot of FM radio stations finding an empty FM fre quency can be tricky DLO s IntelliTune simplifies the process by doing all the work for you To find an empty frequency using IntelliTune 1 Press the dial on TransDock micro This will activate the IntelliTune search While it is searching the word INTELLITUNE will appear on TransDock micro s display 2 Once IntelliTune finds an empty frequency it will display TUNE RADIO TO XXX X Then tune your FM r
10. stereo 4 Tune your car s FM radio to the frequency displayed on TransDock micro 5 Click Play on your iPod to enjoy your music over your car s FM radio For more info on optimizing the sound quality of TransDock micro please read Getting the Best Sound Quality with TransDock micro pg 13 4 DLO TRANSDOCK MICRO USER GUIDE Click play to enjoy your music 5 Attach Connector Cable 2 Connector Cable Tune radio to match IntelliTune frequency LCD Display About TransDock micro TransDock micro is an FM transmitter that broadcasts your iPod audio to the FM radio in your car while simultaneously charging your iPod Trans Dock micro features DLO s IntelliTune technology which scans the airwaves and automatically finds the best freguencies for transmitting TransDock micro also features a unigue dial based interface which provides a simple and intuitive way to adjust TransDock micro s settings and tune to any freguency from 88 1 to 107 9 Like all DLO transmitters it comes with the ability to set your own preset stations so you can save the freguencies you use most Setting Up Your TransDock micro 1 Turn on your car radio and set it to FM radio mode 2 Insert TransDock micro into your car s power outlet NOTE You can slightly alter the angle of your TransDock micro by tilting the dial head up or down See drawing A 3 Plug the Connector Cable into the iPod dock connector 4 T
Download Pdf Manuals
Related Search