Dakota Digital MCL-3207 Automobile Parts User Manual
Contents
1. 4510 W 61st St North Phone 605 332 6513 fp Sioux Falls SD 57107 Fax 605 339 4106 www dakotadigital com dakotasupport dakotadigital com Copyright 2011 Dakota Digital Inc MAN 650305 D2. S SEE is displayed then press and hold the switch until e Release the switch The current setting will be displayed OFF or a mileage from 500 1500 e Press and release the switch until the desired setting is displayed e Press and hold the switch until is displayed to save the setting is displayed MAN 650305 D n I9Ht Night Dimming Your display system has a dimming feature that dims the display intensity automatically at night Normally the system is at full brightness for daytime viewing To have the system at full brightness all of the time go into the setup menu as described above and select ndt night Press and release the function switch to select OFF instead of on Press and hold the function switch to save the new setting e Press and release the switch until n SHE is displayed then press and hold the switch until is displayed e Release the switch The current setting will be displayed Un OFF e Press and release the switch until the desired setting is displayed e Press and hold the switch until is displayed to save the setting LuArn Rom warning setup The rpm warning shift point can be adjusted from 2000 7500 e Press and release the switch until uuArn P is displayed then press and hold the switch until is displayed e Release the switch The current warning point will be displayed on the bar graph e Press and release the
3. e Release the switch The current warning point will be displayed 9 0 ic i e Press and release the switch until the desired setting is displayed e Press and hold the switch until is displayed to save the setting EEPIP Temperature warning setup e Press and release the switch until EE IP is displayed then press and hold the switch until is displayed e Release the switch H and number from 307F 419F or 153C 215C will be displayed Whenever the temp exceeds this number the gauge will flash e Press and release the switch until the desired value is displayed e Press and hold the switch until is displayed to save the setting Default is 419 F 215C setting it to this temp will also prevent the gauge from flashing Temp units follow the speed unit setup MPH sets for F and km h sets for C MAN 650305 D PE F Performance menu setup The performance readings can be turned on or off When they are turned off the odometer display will only toggle through the mileage readings Press and release the switch until PEF is displayed then press and hold the switch until is displayed Release the switch The current setting will be displayed on or oF F Press and release the switch until the desired setting is displayed Press and hold the switch until is displayed to save the setting CL Clock setup e Press and release the switch until CL CAL is displayed then pr
4. 0 60 T gt e0 600 0 0 60mph time 0 100kph QUARTR gt c5 00 0 quarter mile time QT MPH gt c5 du quarter mile speed CLOCK gt fed 12 hour clock HOURS gt H 0 0 re settable hour meter RPM gt gogg rpm reading in alpha display HI RPM gt H 000 high rom recall TEMP gt dog F temperature reading C if metric The 0 60 and 1 4 mile timers are zeroed by pressing and holding the switch while that timer is displayed The timer will not restart until the soeed reaches zero and you start driving again Display functions with a in front of them are only shown with performance readings turned on MAN 650305 D Troubleshooting guide Problem Possible cause Solution Gauge will not light up Orange White wire does not have power Inspect and repair stock harness Brown Gray wire does not have power Inspect and repair stock harness Black wire is not getting a good ground Inspect and repair stock harness Gauge is damaged Return gauge for repair see instructions Clock resets when key is off Brown Gray wire does not have constant power _ Inspect and repair stock harness Gauge lights up but speed No data from ECM Check engine trouble codes will only show Zero Sensor is not sending a speed signal Check wiring and test sensor Speed reading is incorrect _ Gauge is not calibrated correctly Gauge must be calibrated see instructions Gauge lights up but tach No data from ECM Check engine trouble codes will only sho
5. V SPEEDOMETER amp TACHOMETER The speedometer and tachometer signals are read from the engine control module ECM over a data bus The speed can be calibrated to allow for differences in tires or gearing calibration is discussed later The tach bar displays rom x1000 with a range of 7000 rom The rpm can also optionally be shown on the message display CLOCK The clock uses a 12 hour format and can be set by pressing and holding the switch while the clock is displayed After the switch is held for a few seconds the hours will begin flashing Momentarily pressing the switch will change the hours holding the switch will move to the minute set and the minutes will begin flashing Momentarily pressing the switch will now change the minutes Holding the switch will exit the clock set mode MOUNTING The gauge will mount into the original housing using original grommet screws and mounting clip Remove the stock gauge by pulling it out of the housing using a slight rocking motion it is held in place by a plastic mounting clip on the back of the gauge Once out remove the two screws from the back of the mounting clip then unplug the gauge Remove the grommet from the stock gauge and install it over the MCL 3207 Plug in the MCL 3207 and secure the mounting clip with the two screws Push the gauge firmly back into the hole making sure the clip lines up with the slots in the dash and also watching that wires are not damaged or pinched see photos below a
6. WWW DAKOTADIGITAL COM MODEL MCL 3207 3 3 8 SPEEDOMETER TACHOMETER for 2008 2010 Rocker IMPORTANT NOTE This gauge has an odometer preset option that is only available one time in the first 100 miles 160km of operation See Odometer preset for instructions GAUGE SETUP AND CALIBRATION The setup menus are entered by holding the switch in while turning the key on The menus are as follows Menu Description d A9 read diagnostic codes AdduSe adjust calibrate speed un IE select speed unit MPH or km h 5 SEE miles to service setting 9EAr transmission gear display selection PEGE turn on off performance displays BERT set temperature warning point lula RPM set RPM shift warning point buArn set low volt warning point CL CAL adjust clock calibration n IHE turn on off automatic night dimming FUEL low fuel light setup inFO display gauge revision code on speedometer odo one time odometer preset POWER amp GROUND The gauge is a direct plug in Constant battery power and key switched power are supplied by the stock harness along with ground STATUS AND WARNING INDICATORS Several indicators are supplied on the stock wiring harness Some of these may not be active on your motorcycle These include the security engine ABS and low fuel LOW VOLTAGE WARNING When the voltage drops below the warning limit with the engine running LO and your current voltage will be displayed default warning limit is 11 0
7. ess and hold the switch until is displayed e The display will show CL and a number from to 1 This allows the clock to be adjusted 7 to 8 seconds per day e Press and release the switch to change the CAL value press and hold the switch to save this and exit the clock setup FUEL Low fuel light setup e Press and release the switch until FUEL is displayed then press and hold the switch until is displayed e The display will show OFF c4n 2004 2008 Dyna SFo Sportster or d09 2009 up Dyna 2004 2008 Dyna should be used if there is a stock fuel gauge and it is 2008 or older If it has a stock fuel gauge and it is 2009 or newer use 2009 up Dyna Sportster should be used when there is only a low fuel switch Press and release the switch to change to the desired setting e Press and hold the switch until is displayed to save the setting odo Odometer preset The odometer can be preset by the customer within the first 100 miles Once the odometer has more than 100 miles the menu option will no longer be displayed Make sure you have correctly selected the units to be either MPH or km h first The odometer will be set in the selected units Once you have preset the miles you cannot change it again WARNING This only allows setting odometer to the nearest mile Do not use tenths For example a mileage of 65432 1 should be set to 065432 using this method If the tenths d
8. h RMA number your full name and address street address preferred and a telephone number where you can be reached during the day Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase Send no money We will bill you after repair Dakota Digital 24 Month Warranty DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it under normal use and condition be proven defective in material or workmanship within 24 MONTHS FROM THE DATE OF PURCHASE such defect s will be repaired or replaced at Dakota Digital s option This warranty does not cover nor extend to damage to the vehicle s systems and does not cover removal or reinstallation of the product This Warranty does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration improper installation mishandling misuse neglect or accident This Warranty is in lieu of all other expressed warranties or liabilities Any implied warranties including any implied warranty of merchantability shall be limited to the duration of this written warranty Any action for breach of any warranty hereunder including any implied warranty of merchantability must be brought within a period of 24 months from date of original purchase No person or representative is authorized to assume for Dakota Digital any liability other than expressed herein in connection with the sale of this product
9. igit is used the odometer will read 10 times too high Press and release the switch until adai is displayed then press and hold the switch until is displayed The current miles will be displayed with the left most digit flashing Press and release the switch to increment the digit Press and hold the switch to move to the next digit to the right Continue until the right most digit has been set Press and hold the switch and the speed display will show no Press and hold the switch while no is displayed to go back and continue changing the odometer display Turn the key off to cancel any changes e Press and release the switch to change to speed display to 4E5 Press and hold the switch while 4 amp 5 is displayed to save the current odometer reading FUNCTION SWITCH The function switch on the side of the dash panel allows access to all of the mileage rom and performance information Pressing and releasing the function switch toggles through the different displays Press and holding the switch will reset the current display The display sequence is as follows ODOMTR gt dodo dd odometer mileage TRIP A gt 900 0 trip meter mileage A TRIP B gt gud i trip meter mileage B SERVIC gt 5 guid miles since last service if programmed KPH gt Ra gt gt gt metric speed conversion to mph if metric unit is selected VOLTS gt gag displays voltage to gauge HI SPD gt Hi go high speed recall
10. llow you to decrease the speedometer reading e Press and release the switch to change press and hold the switch to continue The display will change to LL and a number from 0 75 to 1 25 This is the calibration ratio that is applied to the reading that the ECM is providing 1 10 will be 10 faster 0 90 will be 10 slower Actual speed x current cal ratio 1 00 by default new cal ratio speedometer reading e Press and release the switch to change the cal ratio When the desired cal ratio is shown press and hold the switch to save it un le Speed unit e Press and release the switch until un iE is displayed then press and hold the switch until is displayed e Release the switch The display will light up the current speed unit MPH or km h e Press and hold the switch to keep the current unit or press and release the switch to change the unit e Press and hold the switch until is displayed to save the setting 5 SEt Miles to Next Service setup The service mileage is a countdown mile meter The service mile display can be disabled or can be set to count down from 500 7500 miles If the service mileage is enabled and it gets to 0 miles it will display 5 duE each time the key is turned on If the push button switch is pressed and held while S du or S and a mileage is displayed the service miles will be reset to your preset value e Press and release the switch until
11. nd on next page MAN 650305 D SPEEDOMETER SETUP Press and hold the switch while turning the key on and starting the engine Once the engine is running release the switch Press and release the switch to change the menu selection d IR9 Diagnostics mode for checking clearing trouble codes e Press and release the switch until d 1A9 is displayed then press and hold the switch until is displayed e Release the switch The display will show End Ine SECur amp AbS or done e Press and release the switch to change the selection press and hold the switch until is displayed to begin reading the stored codes for the particular system e Release the switch The display will show the current codes non or na 5P Press and release the switch to move to the next stored code After all codes are displayed the module part number will be scrolled across the screen To clear codes press and hold the switch when end is displayed Consult a service manual for trouble code descriptions SPEED CALIBRATION The speed calibration is not required unless you have changed out the stock transmission pulley or tires AdduSt Adjust e Press and release the switch until AdUuSet is displayed then press and hold the switch until is displayed e Release the switch The display will show FASE or Si duu Fast will allow you to increase the speedometer reading slow will a
12. ram each gear individually press and release the switch until EAR a is displayed then press and hold the switch e The message will show LU ECH if the engine rom is below 1500 or LU 5d if the vehicle speed is below 5 MPH e Begin driving in 1 gear The display should show JEAr i and the should be flashing Drive at a steady speed until the 1 goes steady and then changes to a flashing 2 it should only take about 20 seconds if the speed and RPMs are steady gt Optional If the gear does not stop flashing you can manually override and jump to the next gear by pressing and releasing the switch to store the gear position quicker e Shift to 2 gear and drive at a steady speed e Wait until the 2 goes steady and then changes to a flashing 3 Shift to 3rd gear gt Optional If the gears do not stop flashing you can manually override and jump to the next gear by pressing and releasing the switch to store the gear position quicker e Repeat this through each gear When you are done come to a complete stop or press and hold the switch until the display shows donE and then release it e Press and release the switch to restart the gauges in normal operation verify the gear position by riding through each gear and seeing if positions agree LuArn Voltage warning setup e Press and release the switch until LJArn is displayed then press and hold the switch until is displayed
13. switch until the desired setting is displayed e Press and hold the switch until is displayed to save the setting SEAr Gear Indicator setup This gauge has a single digit display for gear position The gauge can learn the gear ratios based on speed and rpm so no sensors are needed just what you ve already connected It will work with 4 5 6 or 7 speed transmissions The factory preset option will preset the indicator to work with a stock 5 or 6 speed drive train With a stock 6 speed there will be a slight delay the first time you shift to sixth gear as the system verifies the gear Subsequent shifts to sixth gear will not have the delay You can also program each gear position for aftermarket transmissions or if you ve changed wheel size or sprocket size To program the gear positions begin at a section of road where you can gradually shift through all of the gears Press and hold the switch while turning the key on and starting the engine Once the engine is running release the switch e Press and release the switch until SEA is displayed press and hold the switch until is displayed e The display will show oFF Pr eS t P 883 or LEArn oFF will disable the indicator PrESEE will set the indicator for an original factory transmission F 883 will set the indicator for a Sportster 883 transmission LEArn allows it to work with virtually any transmission option e To prog
14. w Zero Gauge will not dim Auto dimming is disabled Check setting under night menu Gauge remains dim at all Light sensor is covered Make sure the bottom center of the gauge lens is clean and times not obstructed Security indicator does Loose or incorrect connection to indicator wire Inspect and repair stock harness not work Temperature reading does Run switch is not on Run switch must be on to get temperature data from ECM not show up Low Fuel Indicator does Indicator is turned off Change setting under FUEL menu see SETUP section not operate Gauge is set for wrong setup type Change setting under FUEL menu See SETUP section Fuel sender or gauge is not working Inspect and repair stock componenis Service and Repair DAKOTA DIGITAL offers complete service and repair of its product line In addition technical consultation is available to help you work through any questions or problems you may be having installing one of our products Please read through the Troubleshooting Guide There you will find the solution to most problems Should you ever need to send the unit back for repairs please call our technical support line 605 332 6513 to request a Return Merchandise Authorization number Package the product in a good quality box along with plenty of packing material Ship the product by UPS or insured Parcel Post Be sure to include the RMA number on the package and include a complete description of the problem wit
Download Pdf Manuals
Related Search