Crosley Radio CR86 Stereo System User Manual
Contents
1. To erase the repeat function press the REPEAT BUTTON 11 again until the REPEAT IDICATOR 10 is off Programmed Playback 1 Press the PROGRAM BUTTON 13 01 will shown on the display and the PROGRAM INDICATOR 12 will flash 2 Press the FORWARD SKIP BUTTON 16 or the BACKWARD SKIP BUTTON 14 to select a track 3 Press the PROGRAM BUTTON 13 again to store the selected track number 4 Repeat steps 2 and 3 above to program other tracks 5 Press the PLAY PAUSE BUTTON 8 to start programmed playback and the PROGRAM INDICATOR 12 will be on 6 Toerase the programmed sequence press the STOP BUTTON 9 twice or until the PROGRAM INDICATOR 12 is off Programmed tracks will also erase when the CD DRAWER 13 is opened NOTE Maximum of 20 tracks can be programmed to play in any order Welcome Thank you for purchasing the Crosley Band Master 3 in 1 Entertainer CR86 Before operating this unit please read this manual thoroughly and retain it for future reference About This Manual Instructions in this manual describe the control functions of the CR86 Table of Contents Getting Started Control Locators 4 5 Unpacking 2 nn 6 Power Source 6 Earphones Jack Operation 6 Turntable Operation Turntable Features 7 Turntable Instructions 7 Tone Arm Adjustment 7 Accessory Adapter for 45 rpm Eo 8 Radio Operation2. Do not use attachments not recommended by the product manufacturer as they may cause hazards Water and Moisture Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase A or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to a 10 Power Sources This product should be operated only from the type of power source indicated on the marking label if you are not sure of the type of power supply to your home Consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions 11 Grounding or Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into
3. Radio Operati0N 8 CA initan 8 CD Operation Playa CDon de Skip Forward And Skip Reverse ideada 9 Search Froward And Reverse During Play 9 Repeat Play aanrennen 10 Programmed Playback 10 General Troubleshooting Guide 11 Wa Y E 12 Control Locators Unit Controls Speakers Tuner Dial Volume Knob Open Close Button Power Indicator Power Button Play Pause Indicator Play Pause Button Stop Button 10 Repeat Indicator 11 Repeat Button 12 Program Indicator 13 Program Button 14 Backward Skip Button 15 CD Drawer 16 Forward Skip Button 17 Earphone Jack 18 Function Switch CD PHONO RADIO 19 AM FM Button 20 Tuning Knob 21 LED Display OANDOARWN CD Operation Rotate the FUNCTION SWITCH 18 to select CD mode N Press the OPEN CLOSE BUTTON 4 to open the CD DRAWER 15 Place a disc in the tray with the labeled side of the disc facing up oo Press the OPEN CLOSE BUTTON 4 again close the CD DRAWER 15 The display will show for a few seconds then the total number of tracks on the disc will be displayed 00 will be shown when there is no disc inside the unit gt Press the PLAY PAUSE BUTTON 8 to start playback The PLAY PAUSE INDICATOR 7 will light up al Adjust the VOLUME KNOB 3 to the desired volume level O To pause playback press the PLAY PAUSE BUTTON 8 The PLAY PAUSE INDICATOR 7 will f
4. the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 12 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product 13 Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges 14 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 15 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 16 Object and Liquid Entry Never push objects of any kind into this product th
5. the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help o Oo nm NAO WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture CAUTION Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure CAUTION RISKOF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert user to the presence of important operating and maintenance servicing instruction in the literature accompanying the appliance CAUTION For Compact Disc Units Only INVISBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED AVOID DIRECT EXPORSURE TO LASER BEAM e Marking plate was located on bottom enclosure Specification Frequency Range AM 525 1710 KHz FM
6. 87 5 108 5 MHz Power Supply AC 120V 60Hz Power Consumption 18W Speed 33 45 78 RPM Speaker 4 8ohm 5W x 2 DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE General There is no Power 1 Make sure the radio is plugged in correctly 2 Check to see that the power button is pushed in There is no Sound 1 Check the volume level by turning the volume knob Turntable will not work 1 Make sure the function switch is set to phono 2 Make sure the needle cover is flipped up CD does not play 1 Check to make sure CD is inserted correctly label side facing up 2 Check that the surface of the CD is clean 3 Make sure function switch is set to CD Turntable is dragging 1 Make sure the Turntable Suspension Screws are turned clockwise all the way in to allow the turntable to sit on the suspension Needles are available for additional charges please call us at 1 866 CROSLEY www crosleyradio com CDOperation 10 Repeat Playback To repeat a single track choose the track that you want to repeat then press the PLAY PAUSE BUTTON 8 to start the track Press the REPEAT BUTTON 11 once to repeat this track The REPEAT INDICATOR 10 will flash To repeat all tracks press the PLAY PAUSE BUTTON 8 to start the CD Press the REPEAT BUTTON 11 twice to repeat all tracks Once the CD ends it will star over again from the beginning of the CD The REPEAT INDICATOR 10 will remain on
7. CR86 Band Master 3 in 1 Entertainer Instruction Manual WARRANTY Crosley Radio Products are warranted against defects in material and workmanship for a period of 90 days beginning from the date of sale to the original purchaser Should the unit fail under normal usage during the 90 day warranty period a request for RETURN AUTHORIZATION R A must be made by the original customer before returning the unit Call Crosley Radio customer service for an Authorization at 502 583 4246 from 9 AM to 5 PM EST Monday to riday Upon receiving the RETURN AUTHORIZATION number from the Customer Service Department properly pack your unit in its original packaging Include any adapters parts amp accessories which were originally provided with the product along with a check or money order for 19 95 made out to Crosley Radio to cover the handling and return postage Display the R A on the outside of the carton and ship PREPAID via standard UPS or its equivalent E R O SLE Y RADIO ATTN RETURNS DEP T 2001 PRODUCTION DRIVE BAY 2 amp 3 LOUISVILLE KY 40299 CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization The purchaser s bill of sale is the only proof of warranty entitlement and must accompany the unit The warranty does not cover damage due to acts of n
8. ards 20 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition 21 Wall or ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer 22 Heat The product should be situated away from heat sources such as radiators Heat registers stoves or other products including amplifiers that produce heat WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful intereference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate
9. ature accident misuse abuse negligence commercial use or modification of or to any part of the product This warranty does not cover damage due to improper operation or maintenance connection to improper voltage supply or attempted repair by anyone other than a facility authorized by Crosley Radio to service the product This warranty does not cover products sold AS IS or consumables such as fuses or batteries This warranty is valid only in the United States This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state to state In accordance with the Moss Magnuson Warranty Act of July 10 1975 this is termed a limited warranty which in no way compromises Crosley Radio high standards of Quality and Workmanship 12 IMPORTANT SAFETY INSTRUCTION PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS THAT ARE APPLICABLE TO YOUR EQUIPMENT Read Instructions All the safety and operating instructions should be read before the product is operated Retain instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the product and in the operating Instructions should be adhered to Follow Instructions All operating and use instructions should be followed Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Attachments
10. e Turntable Suspension Screw 22 clockwise until it is all the way down Do not force it This allows turntable to float on its shock absorbers Earphone 17 8 Remove the protecting Rubbers form the turntable The sound from all speakers is cut off Turntable Operation 4 2 3 4 Selectable 33 45 78 rpm speeds Load up to 6 records at a time Plays 7 10 and 12 records Record changer is fully automatic or can be operated manually Turntable Instructions a A OO N oO 0 N O Turn power on by pressing POWER BUTTON 6 Rotate the FUNCTION SWITCH 18 to PHONO mode Lift TENSION ARM 24 and rotate counter clockwise over the TONE ARM 25 Load desired records on the CENTER SPINDLE 23 Records should be loaded one at a time Lift TENSION ARM 24 and rotate it clockwise over the records and release TENSION ARM 24 will automatically pull down onto the records Set the SIZE SELECT SWITCH 26 to the correct size of your records Set the SPEED SELECT SWITCH 29 to the correct speed of your records Move the TURNTABLE SWITCH 28 to the ON position Turntable will begin to turn Flip the needle cover up 10 Move the TURNTABLE SWITCH 28 to AUTO 11 The switch will automatically return back to the ON position and the first record will drop The TONE ARM 25 will automatically lift and move to the beginning of the record Once the first reco
11. lash Press the PLAY PAUSE BUTTON 8 again to resume playback N To stop playback press the STOP BUTTON 9 and the PLAY PAUSE INDICATOR 7 will go off Skip Forward And Skip Reverse 1 Press the FORWARD SKIP BUTTON 16 or the BACKWARD SKIP BUTTON 14 to select a track 2 Press the PLAY PAUSE BUTTON 8 to start playing the selected track Search Forward And Reverse During Play PLAYBACK 1 Press and hold the FORWARD SKIP BUTTON 16 or the BACKWARD SKIP BUTTON 14 to search forward or backward though the selected track 2 Release the button atthe desired point playback will resume automatically Turntable Operation Radio Operation Control Locators Unit Controls 22 23 24 To play the 45 rpm record place the adapter in the i center of record This unit includes six adapters 1 Rotate the FUNCTION SWITCH 18 to select se ae en Screw found in the polybag of the instruction manual RADIO mode 24 Tension je ss IC 25 Ti 2 Press the AM FM BUTTON 19 to the desired AN 25 radio band AM or FM wz 27 Tone Arm Rest EOE A 28 Turntable Switch elect the desired radio station by rotating 29 Speed Select Switch TUNING KNOB 20 30 able a 28 f 31 FM Wire Antenna ia Adapter for 45 rpm 4 Adjust the VOLUME KNOB 4 to the desired 32 AC Power Cord 29 sound level Antenna Y Antenna for FM reception the
12. rd is finished the TONE ARM 25 will move back to the TONE ARM REST 27 and the next record will drop The TONE ARM 25 will move back to the beginning of the record This will repeat until the last record is finished When the last record is finished the TONE ARM 25 will return to its rest and the turntable will shut off To manually switch to the next record during playback move the TURNTABLE SWITCH 8 to the AUTO position The next record will drop and begin to play 12 To stop playback manually move the TURNTABLE SWITCH 8 to the OFF position Gently lift the TONE ARM 5 from the record and return itto the TONE ARM REST 7 13 To remove the records from the turntable lift the TENSION ARM 24 up and rotate it counter clockwise over the TONE ARM 25 Grab the edges of the bottom record and lift straight up Tone Arm Adjustment 1 Adjust this screw if the TONE ARM 25 is not raising high enough to clear to the TONE ARM REST 27 Turn the screw counter clockwise to raise the height Turn the screw clockwise to lower the height 2 Adjust this screw if the TONE ARM 25 drops on the record too early or too late Turn the screw counter clockwise to start at a later point Turn the screw clockwise to start at an earlier point 3 Adjust the screw if you feel there is not enough tone arm pressure on the record Turn the screw counter clockwise to increase pressure Turn the screw clockwise to descrease
13. rough openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 17 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 18 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way f When the product exhibits a distinct change in performance this indicates a need for service 19 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other haz
14. the pressure Note To play a single record you do not have to place the Tension Arm over top of the record If you do position the Tension Arm over the record the record will not automatically start when you move the switch to auto Note Adjust the screws one turn at a time and check the adjustment after each turn
15. unit is provided with a FM WIRE ANTENNA 31 move the wire until the reception is clear and with no interferences For AM reception the unit is provided with a directional build in ferrite antenna Rotate the set to find the position in which the best reception is obtained Do not connect the FM WIRE ANTENNA 31 to any outside antenna 00000000 oo000000 31 32 8 5 Getting Started 1 Remove packing materials from unit 1 Unwind the AC POWER CORD 32 at the back of the unit and connect it to a power outlet Note Save all packing materials 2 Plug A C cord into appropriate outlet Remove plastic bag covering unit Remove plastic safety cover form A C PLUG 82 A Remove tie from A C Cord and untie ANTENNA WIRE 31 on the back of Radio Polarized Plug 3 This product is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact you electrician to replace your obsolete outlet Do not defeat the purpose of the polarized plug Earphones Jack Operation 1 Listening through Earphones Headphones not included 5 Open lid and remove styrofoam shipping material from turntable 6 Remove black tie wrap from under the tone arm 7 Using your Fingers Turn th
Download Pdf Manuals
Related Search