Home

Craftsman 917.371812 Lawn Mower User Manual

image

Contents

1. The Icons and their meanings This title is write protected This title was recorded with timer recording This title is Weekly Recording Weekly Overwrite This title is Daily Recording Daily Overwrite This title is Daily Recording Weekly Overwrite This title has not been played back This title is copy protected This title can only be recorded once title Using Library Database Navigation system you can easily modify registered information edit the title or play list as well as search for the beginning of each title About registration of information The following information is automatically registered for each title when ordinary recording or timer recording is performed then stored in an area specified on the unit e index reduced pictures to show programme titles e programme title e e date and time erecording mode e length of recording time The items marked with an asterisk can be easily modified and registered again after recording by using Library Database Navigation system The limitations of registration You can register information up to 99 titles for the DVD deck and 200 titles for the HDD deck When the amount of information is at the limits of registration you cannot record new titles any more I
2. PR 80 E 0 DISPLAY Instant Timer Recording ITR This easy method lets you record for 30 minutes to 6 hours selectable in 30 minutes interval and shuts the unit off after recording is finished 1 Press on the unit to start recording 2 Presse again to engage the ITR mode e On the front display panel 0 30 appears 3 you want to record for more than 30 minutes press to extend the time Each press extends recording time by 30 minutes NOTES e You can only perform ITR using the button on the unit e When the recording capacity becomes full during timer recording or Instant Timer Recording the unit automatically performs Relief Recording rs pg 49 Watch Another Programme While Recording On The Unit While recording is going on you can watch another programme on the TV by using the TV s tuner NOTE It is required that the remote control is set to be able to operate the TV in advance gt pg 68 1 During recording press TV AV VIDEO to select TV mode e Video mode is disengaged and the VIDEO lamp on the unit lights off e The programme received on the TV s tuner is displayed on the TV screen 2 Slide the TV CABLE SAT DVD switch to TV Press repeatedly to select the desired channel Elapsed Recording Time And Disc Remaining Time Indication During re
3. 79 Finalise A Disc DVD Deck 80 Help Function 81 Tray Lock DVD Deck Only 81 TROUBLESHOOTING 82 SPECIFICATIONS 85 APPENDIX 86 LIST OF TERMS 91 6 EN DISC INFORMATION About Discs Recordable Playable Discs You can use discs with the following logos for recording and playback RAM RW RAMA 7 DVD RAM DVD RW 12 cm 4 7 GB 9 4 GB 8 cm 1 4 GB 2 8 GB Ver 2 0 2x speed Ver 2 1 1x 3x speed 12 cm 4 7 GB 9 4 GB Ver 1 1 1x 2x speed Video mode VR mode Ver 1 2 4 speed Video mode VR mode AP 7 R4 7 DVD R 12 cm 4 7 GB 8 cm 1 4 GB Ver 2 0 1x 4x 8x speed Video mode e The above table is based on the information as of October 2004 e Recording and playback may not be performed depending on the characteristics and condition of the disc used leading to unsatisfactory results Using discs manufactured by JVC is recommended since they have been tested to be compatible with this unit DVD RAM Discs It is only possible to use discs which conform with DVD RAM standard Version 2 0 or 2 1 e It is impossible to record on DVD RAM discs which do not conform to this standard If you use a disc formatted under a different standard version format it on this unit before use e t may not be possible to record play back edit or dub a DVD RAM disc even
4. DISPLAY Instant Timer Recording ITR This easy method lets you record for 30 minutes to 6 hours selectable in 30 minutes interval and shuts the unit off after recording is finished 1 Press on the unit to start recording 2 Presse again to engage the ITR mode e On the front display panel 0 30 appears 3 If you want to record for more than 30 minutes press to extend the time Each press extends recording time by 30 minutes NOTES e You can only perform ITR using the 6 button on the unit e When the recording capacity becomes full during timer recording or Instant Timer Recording the unit is automatically shut off BASIC OPERATIONS ON HDD DECK ey 44 Watch Another Programme While Recording On The Unit While recording is going on you can watch another programme on the TV by using the TV s tuner NOTE It is required that the remote control is set to be able to operate the TV in advance rs pg 68 1 During recording press TV AV VIDEO to select TV mode e Video mode is disengaged and the VIDEO lamp on the unit lights off e The programme received on the TV s tuner is displayed on the TV screen 2 Slide the TV CABLE SAT DVD switch to TV 3 Press PR repeatedly to select the desired channel Elapsed Recording Time And Disc Remaining Time Indication During recording press DISPLAY repeatedly until the desired indication appears on the fr
5. ENTER SELECT WITH 4 THEN PRESS ENTER SETUP 46 JTHEN PRESS ENTER PRESS SET UP TO EXIT SUBSIDIARY SETTINGS 71 6 Press SET UP to complete the setting The boldface settings below indicate the settings at your purchase AUDIO OUTPUT I DIGITAL AUDIO OUT DOLBY DIGITAL PCM STREAM PCM PCM ONLY Set to the appropriate mode according to the type of the device connected to DIGITAL AUDIO OUT connector DOLBY DIGITAL PCM Select this when you connect the digital input connector of a Dolby Digital Decoder or an amplifier with a built in Dolby Digital Decoder STREAM PCM Select this when you connect the digital input connector of an amplifier with a built in DTS Dolby Digital or MPEG multichannel decoder PCM ONLY Select this when you connect the linear PCM digital input of other audio equipment amplifier MD or DAT deck etc NOTES e This setting also functions when HDD is active e f you watch or play back a title which contains multiple audio languages select ONLY in advance and choose main or sub audio with AUDIO ANALOG AUDIO OUT STEREO DOLBY SURROUND Select the appropriate setting to accommodate the unit to the connected A V equipment This function takes effect when a DVD VIDEO disc is played back STEREO Select this when listening to conventional two channel stereo audio with the unit s AUDIO OUT connectors connected
6. jon Es 2 Press selection keys to select Lal then press ENTER The pop up window appears under the selected item TITLE 99 CHAPTER 99 EACH 0 00 3D ON CINEMA AUTO DVD 897 jaoj On e Lu pa 3 Press selection keys to select the desired option then press ENTER TITLE 99 CHAPTER 99 EACH 0 00 3D ON CINEMA AUTO S jasc Ow Gor m TITLE 99 CHAPTER 99 To clear the on screen bar Press ON SCREEN NOTE See the corresponding pages for details on each menu item 32 EN BASIC OPERATIONS DVD DECK Repeat Playback A B Repeat Playback DVD DVD Audio RAM VIDEO cD You can repeat playback as you like according to the type of disc 1 Press ON SCREEN twice to access the on screen bar 2 Press selection keys to select gt then press ENTER The pop up window appears under the selected item TITLE 99 CHAPTER 99 EACH 0 00 3D ON CINEMA AUTO DVD 3 Press selection keys repeatedly to select the desired Repeat mode then press ENTER DVD RAM RW R OFF Repeat playback is not performed ALL REPEAT The whole disc is played back repeatedly TITLE REPEAT The current title is played back repeatedly DVD VIDEO OFF Repeat playback is not performed TITLE REPEAT The current title is played back repeatedly CHAPTER REPEAT The current chapter is played back repeatedly Audio CD Video CD SVCD JPEG MP3 OFF Repeat playback is not performed ALL REPEAT T
7. Search 33 TOP MOMs ER 27 TV Station And ID List 89 U Unplayable DISCS 2 eite tenent ere nnn innen ced 7 V Variable Speed Search 27 42 VPS PDC Recording 48 Weekly Daily Recording 48 2004 Victor Company of Japan Limited 2 SOSHIN HG
8. 3 Press selection keys to select the desired option then press ENTER e Each time you press the selection keys the interval changes as follows 5 SEC 10 SEC 15 SEC 20 SEC 25 SEC 30 SEC Back to the beginning To clear the on screen bar Press ON SCREEN NOTE JPEG files are played back as a slide show It may take more time to display an image with larger file size 36 En BASIC OPERATIONS DVD DECK Parental Lock DVD DVD DIESE Uno kd EJ This function restricts playback of DVD VIDEO discs which contain violent and other scenes according to the level set by the user For example if a movie which includes violent scenes supports the parental lock feature such scenes which you do not want to let children view can be cut or replaced by other scenes e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DVD so that the DVD lamp lights up on the unit CABLE SAT TV DVD gt 0 9 Selection Keys AVI SET UP To Set Parental Lock For The First Time While stopped 1 Press SET UP to access the Main Menu screen 2 Press selection keys to select DVD VIDEO SET UP then press V 3 Press selection keys to select PARENTAL LOCK then press V DVD VIDEO SET UP Mi
9. Your unit is equipped with a Digital stereo sound decoder NICAM making reception of stereo and bilingual broadcasts possible When the channel is changed the type of broadcast being received will be displayed on the TV screen for a few seconds Type of Broadcast Being On Screen Display Received Regular Monaural EET NICAM Stereo NICAMCD NICAM Bilingual LINES NICAM Monaural NICAM NOTES e SUPERIMPOSE must be set to AUTO Otherwise the on screen displays will not appear pg 73 e If the quality of stereo sound being received is poor the broadcast might be received in monaural with better quality Selection Of The Audio Channel To Be Recorded On A Disc When a programme is recorded on a DVD RAM or DVD RW disc in VR mode all audio channels of the receiving programme are recorded on the disc When you record a programme on a DVD R or DVD RW disc in video mode select the desired audio channel NICAM to be recorded on the disc rs pg 72 NOTE Before playing back a programme recorded in stereo or a bilingual programme refer to Audio Channel Selection rs pg 30 40 en BASIC OPERATIONS HDD DECK Basic Recording e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD ATTENTION The HDD on the unit requires approximately 20 seconds to start up after the unit has been turned on
10. 1 DVD amp HDD VIDEO RECORDER DR MH50S 2 EN SAFETY FIRST Safety Precautions The rating plate and the safety caution are on the rear of the unit WARNING DANGEROUS VOLTAGE INSIDE WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE IMPORTANT Please read the various precautions on page 2 4 before installing or operating the unit It should be noted that it may be unlawful to re record pre recorded tapes DVDs or discs without the consent of the owner of copyright in the sound or video recording broadcast or cable programme and in any literary dramatic musical or artistic work embodied therein CAUTION A UNIT IS A CLASS 1 LASER PRODUCT HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL CAUTION W When you are not using the unit for a long period of time it is recommended that you disconnect the power cord from the mai
11. 75 Cancel And Change Programmes 50 Check Programmes 50 Country Area Code List for Parental Lock 87 D Dise men eec 27 Disc Remaining Time 38 41 Disc RESUME 72 Discs For Playback Only 7 DVD meni 27 Elapsed Recording Time Indication 38 41 F File Structure Of Discs 8 Free Rate Function 39 G Guide Programme Number 74 Instant Timer Recording ITR 38 41 Interlaced SCcan E Reed 73 J Jump Search iinan aa a 28 43 NIU dee dE 78 L Language Code 86 Letter ret ooi eor ere tene 23 Live Memo in rite toe 44 M Manual Channel Set eese 76 Marking Positions To Play Back Again Later 29 Menu Audio Subtitle Language Set 22 One Touch Replay 30 43 46 On screen 31 P 23 Play List 56 Playback Control 30 Programme Playback 35 Progress
12. B Selection Keys 1 Press SET UP to access the Menu screen 2 Press selection keys to select INITIAL SET UP then press V 3 Press selection keys to select CLOCK SET then press V INITIAL SET UP TUNER SET CLOCK SET 1 _________ _ 4 Press selection keys to select YEAR then press ENTER Press selection keys to set the year then press ENTER e Repeat the same procedure to set the date and time e When you set the date press and hold A V to change the date by 15 days interval e When you set the time press and hold A to change the time by 30 minutes interval Te ss TVPROGRAMIE SELECT WITH 4 THEN PRESS ENTER PRESS SET UP TO EXIT 5 Press selection keys to select JUST CLOCK then press ENTER Press selection keys to set to the desired mode then press ENTER e The default setting is OFF e For the Just clock function refer to Just Clock on the right column e If you set to OFF you can disregard the next step as you won t be able to receive regular clock adjustments Press selection keys to select PROGRAMME then press ENTER Press selection keys to set the channel position to the number representing the station transmitting clock setting data then pr
13. Ea LANGUAGE SET AUDIO OUTPUT PARENTAL LOCK pisc PLAY SET UP PARENTAL LEVEL WE COUNTRY CODE SETUP ENTER SELECT WITH THEN PRESS ENTER PRESS SET UP TO EXIT EXIT SELECT 4 Press selection keys to select PARENTAL LEVEL then press ENTER 5 Press selection keys to select the desired level then press DVD VIDEO SET UP LANGUAGE SET AUDIO OUTPUT PARENTAL LOCK DISC PLAY SET UP PARENTAL LEVEL EN GN COUNTRY CODE ENTER eThe smaller the value m of level is the more restrictive the Parental Lock level becomes e Select NONE to cancel the restriction Press the number keys to enter your desired four digit number then press ENTER e f you made a mistake enter a correct number again 7 Press selection keys to select COUNTRY CODE then press ENTER 8 Press selection keys to select your country code then press ENTER e If you do not need to change your country code jump to 10 e See Country Area Code List for Parental Lock pg 87 9 Press the number keys to enter the same password as in step 6 above then press ENTER 10 Press SET UP to complete the setting NOTE Remember your password or make note of it To Change The Settings You can change the Parental Lock settings later 1 Perform steps 1 to 3 of To Set
14. a 4 Press EDIT to return to THEN PRESS 19227 a the normal screen TOEXIT EDITING gt MODIFY CATEGORY E Suid mene T EXT You can protect titles to prevent accidental erasure of the important titles 1 Perform steps 1 2 of Modify Index t pg 53 before continuing 2 Press selection keys to select PROTECT then press ENTER 3 Press selection keys to select a title you want to protect then press ENTER 4 Press selection keys to select PROTECT then press ENTER appears To cancel the protection repeat 3 4 again In step 4 select CANCEL PROTECT then press ENTER 5 Press EDIT to return to the normal screen NOTE All the titles on a disc will be deleted once the disc is formatted even if they are protected titles c pg 54 Delete Title You cannot record any more with Library Database Navigation once the registered titles on the disc reach 99 titles for the DVD deck and 200 titles for the HDD deck Deleting unnecessary titles after dubbing or other operations can increase remaining time and available recording capacity For DVD R discs although it is possible to delete recorded titles available recording capacity does not increase The deleted title is never resumed Play lists and title information in the unit s library are also deleted 1 Press EDIT The Editing screen appears 2 DVD deck only Press selection keys to select MOD
15. 2 Press selection keys to select then press ENTER The pop up window appears under the selected item EACH 0 00 CINEMA AUTO DVD E jasc 9 Om 3 Press the number keys to enter the time then press ENTER Playback starts from the specified time TITLE 99 CHAPTER 99 Example To play back from a point 12 minutes 50 seconds elapsed TIME gt m gt Press 1 Press 2 TIME me TIME 5r gt Press 5 Press 0 TIME E 4258 If you have specified wrong selection Press RETURN on the remote control and repeat the above procedures from step 2 To clear the on screen bar Press ON SCREEN NOTES e When is displayed on the TV screen in step 3 you have selected a point that exceeds the recording time of the disc e Some DVD VIDEO discs do not contain time information and it is not possible to use the Time Search function In such cases Q is displayed on the TV screen as well e This function is not possible for a Video CD SVCD with PBC function en BASIC OPERATIONS ON DVD DECK Simulated Surround Effect Setting The Progressive Mode DVD mA D E ETE E2 EG EZ It is possible to get a simulated surround effect from your stereo System You can enjoy the virtual surround sound with your 2 channel stereo system 1 Press ON SCREEN twice to access the on screen bar e 3D ON appears above the selected item and Simu
16. JPEG file File structure of the disc after starting the MP3 JPEG Navigation Files are automatically grouped as follows and displayed on the MP3 JPEG Navigation screen Data is displayed in the alphabetical order of file name Files are grouped based on roots Root file 1 mp3 file 2 mp3 PoPs 4mp3 file 6 mp3 _ file 7 jpeg file 8 France e This unit can recognise up to 9 hierarchies including directories and files Also it can recognise up to 250 files in each group and up to 99 groups on a disc NOTES e Video CD SVCD discs that support Playback Control The contents of a disc are recorded into several hierarchies and played back according to the instructions on the screen while navigating through the hierarchies It is also possible to playback recorded tracks consecutively without activating the PBC function even when playing a PBC compatible disc rs pg 30 e Regarding the contents recorded on discs Some files may not be played back depending on the file types and other factors DVD VIDEO Marks DISC INFORMATION Ey 9 Placing A Disc Sometimes marks are printed on a DVD disc and or on its packaging to indicate information regarding the contents and functions of the disc Check the marks indicating the contents and functions of the disc Note however that in some cases a disc may not include a mark even for a function it supp
17. as illustrated on page 21 e When you have connected the unit to a TV offering T V Link via a fully wired 21 SCART cable pg 18 and the TV is turned on the unit automatically performs the Preset Download t pg 20 even if you select AUTO SET for Auto Set Up function ATTENTION Once you have performed Auto Set Up even if the unit s memory backup has expired all the stored stations and their Guide Programme numbers remain in the unit s memory and the unit will not perform Auto Set Up again The unit only performs Auto Clock Set when the unit is turned on If you have moved to a different area perform each setting as required e Tuner setting pg 75 e Clock setting pg 78 If a new station starts broadcasting in your area perform tuner setting r amp pg 75 NOTES e areas where no TV station transmits a PDC Programme Delivery Control signal the unit can perform neither Auto Clock Set nor Auto Guide Programme Number Set e If there is a power cut or if you press or SET UP while Auto Set Up is in progress Auto Set Up will be interrupted be sure to turn off the unit power once and try again from step 1 e Auto Clock Set may not function properly depending on the reception condition After Auto Set Up is completed perform Monitor Set on page 23 20 en INITIAL SETTINGS Preset Download Auto Channel Set by Downloading from TV Auto Clock Set Au
18. 86 EN APPENDIX Language Code List AA Afar IK Inupiak RN Kirundi AB Abkhazian IN Indonesian RO Rumanian AF Afrikaans IS Icelandic RU Russian AM Ameharic IW Hebrew RW Kinyarwanda AR Arabic Jl Yiddish SA Sanskrit AS Assamese JW Javanese SD Sindhi AY Aymara KA Georgian AZ Azerbaijani KK Kazakh SH Serbo Croatian BA Bashkir KL Greenlandic SI Singhalese BE Byelorussian KM Cambodian SK Slovak BG Bulgarian KN Kannada SL Slovenian BH Bihari KO Korean KOR SM Samoan BI Bislama KS Kashmiri SN Shona BN Bengali Bangla KU Kurdish SO Somali BO Tibetan KY Kirghiz SQ Albanian BR Breton LA Latin SR Serbian CA Catalan LN Lingala SS Siswati Corsican LO Laothian ST Sesotho CS Czech LT Lithuanian SU Sundanese CY Welsh LV Latvian Lettish SW Swahili DZ Bhutani MG Malagasy TA Tamil EL Greek MI Maori TE Telugu EO Esperanto MK Macedonian TG Tajik ET Estonian ML Malayalam TH Thai EU Basque MN Mongolian Tl Tigrinya FA Persian MO Moldavian TK Turkmen FJ Fiji MR Marathi TL Tagalog FO Faroese MS Malay MAY Setswana FY Frisian MT Maltese TO Tonga GA Irish MY Burmese TR Turkish GD Scots Gaelic NA Nauru TS Tsonga GL Galician NE Nepali TT Tatar GN Guarani OC Occitan TW Twi GU Gujarati OM Afan Oromo UK Ukrainian HA Hausa OR Oriya UR Urdu HI Hindi PA Panjabi UZ Uzbek HR Croatian PL Polish VI Vietname
19. DISC PLAY SET UP m RESUME OFF ON DISC RESUME When this function is set to or DISC RESUME you can use the resume function pg 28 OFF You cannot use the resume function ON You can start playback from the resume point of the placed disc DISC RESUME The unit retains a memory of the resume points of the last 30 discs played back even though they have been ejected NOTE DISC setting works DVD VIDEO VCD SVCD and already finalised DVD R DVD RW video mode discs For other types of discs the function under ON setting will be applied even if RESUME is set to DISC RESUME HDD SET UP LIVE MEMORY OFF 30 MIN 1 HR 3 HR When this function is set to 30 MIN 1 HR or 3 HR you can apply the selected time length to Temporary recording for Live Memory HDD deck only pg 46 DVD SET UP SAVE AS LIBRARY OFF ON When this function is set to the recording information is automatically stored in the library For details refer to Edit Library Information t pg 58 CONTINUOUS PLAY OFF ON When this function is set to multiple titles on a disc are played back continuously one after another i VIDEO MODE RECORDING ASPECT PRIORITIZE 4 3 PRIORITIZE 16 9 This is the setting for the aspect ratio used when you dub titles to DVD discs in video mode If the titles you want to dub are recorded
20. Press gt once e Pressing ON SCREEN displays 1 5 on the top right corner of the screen NOTE When the unit is connected with a digital audio device using an optional optical cable set DIGITAL AUDIO OUT to ONLY pg 30 Jump Search You can locate a scene ahead or behind the current one by jumping scenes according to selected time intervals gt pg 72 during playback or Live Memory Playback Press JUMP or JUMP e To advance forward or back press JUMP or JUMP repeatedly within 5 seconds of each press to continue jump e Depending on the time from where you want to start jump search the first press of JUMP or JUMP will not necessarily lead to a jump of the selected time interval The first press will lead to a jump to the nearest quarter points of an hour 15 min 30 min 45 min 00 min The subsequent jumps will then be in accordance to the selected time interval e When you cannot advance any further beginning or end of programme reached the message UNABLE TO GO BACK ANY MORE appears on the screen and the on air screen resumes In such a case press I lt lt lt or Example Playback search when jump interval is set to 15 MIN jumps Taking for instance you want to start jump search 40 minutes after the beginning of the programme Pressing JUMP or JUMP will result in a jump to the scene at the 30 minutes point or 45 minutes point respectively as illust
21. To lock tray While the unit is turned off press and hold lil then press on the unit LOCK appears on the front display panel and the disc tray is locked To unlock tray While the unit is turned off press and hold lil then press on the unit UNLOCK appears on the front display panel 82 TROUBLESHOOTING Before requesting service for a problem use this chart and see if you can solve the trouble yourself Small problems are often easily Solved and this can save you the trouble of sending your unit off for repair Initialising DVD Deck Only Malfunction occurs the unit Press to turn off the unit press and hold 5 I then press for two seconds or more General No power is supplied to the unit e The AC power plug is disconnected from the mains outlet Connect the AC power plug to the mains outlet securely pg 18 The remote control does not work properly Remove the batteries wait for 5 minutes or more then load the butteries again e The setting of the remote control code is inappropriate Set the same remote control code 1 2 3 or 4 on both the unit and the remote control pg 68 e The batteries are discharged Replace the dead batteries with new ones Dubbing from the external equipment is not possible e The source another video recorder camcorder has not been properly connected Confirm that the source is properly conne
22. vy Last week TUE wen MON SUN OVERWRITE MON SAT OVERWRITE MON FRI OVERWRITE Daily Recording Daily Overwrite When the set daily programme is broadcast yesterday s programme is automatically deleted and overwritten by the new programme Save the title of each programme you wish to save then the recorded programme is saved and will not be overwritten by the new programme Overwritten the DVD deck ONCE One Time Recording WEEKLY Weekly Recording MON SUN MON SAT MON FRI Daily Recording Tuesday s programme Monday s programme Now available from some TV stations PDC Programme Delivery Control and VPS Video Programme System are services designed to assure safe accurate timer recording With this system special code signals are transmitted together with the audio video signals These code signals control your video unit and have precedence over the advertised times you may have preset into the timer This means that your unit will start and stop recording when the preset TV programmes actually start and end even if the broadcast time of a preset TV programme is changed from what has been advertised PDC is currently available nationally on BBC1 BBC2 Ch 4 and Ch 5 except from a few small relay transmitters Ch 3 operates a PDC service in some areas All channels intend to offer this service in due course Check your TV programme listi
23. For DV devices that do not support the 1x speed the rewinding time may be longer 3 Sound monitor switch For selecting the desired sound format for dubbing 1 Connect a camcorder or DV equipment to the DV IN connector on the unit s front panel 2 Press HDD so that the HDD lamp lights up on the unit Press PR to set the channel to DV DV equipment 4 Press ON SCREEN e The on screen display for DV dubbing appears 5 Press selection keys to select D 1 then press ENTER to display the remote icon facing to the right for the DV equipment Press REC MODE repeatedly to set the recording mode 7 Locate the point from where you want to start dubbing then stop or pause playback by pressing the following buttons on the remote control gt gt gt lt lt Il e To play back in slow speed 1 10 of the normal speed press to pause playback then press lt lt or gt gt e To play back frame by frame press to pause playback then press repeatedly Each press of advances a frame e To change the playback direction press lt lt or gt 8 Press selection keys to select _ s then press ENTER repeatedly until the desired sound track appears on the TV Screen SOUND 1 Select this to record the original stereo sound played back on the connected DV equipment SOUND 2 Select this to record the dubbed stereo sound played back on the connected DV equipment MIX Select this
24. You can record programmes with one of the following weekly daily timer settings For the HDD deck When you select a mode other than ONCE the space on the hard disk drive is saved for new recordings by overwriting previous recordings To prevent loss of a needed recording backup programmes you wish to save by dubbing them to DVD discs before overwriting previous recordings Or save the title of weekly daily programmes to avoid overwriting of a previous week day pg 50 ONCE One Time Recording In this mode a programme will not be automatically overwritten WEEKLY OVERWRITE Weekly Recording Weekly Overwrite When the set weekly programme is broadcast the programme recorded last week is automatically deleted and overwritten by the new programme Save the title of each programme you wish to save then the recorded programme is saved and will not be overwritten by the new programme Overwritten MON SUN dial A WEEK MON SAT FOR A WEEK MON FRI FOR A WEEK Daily Recording Weekly Overwrite When the set weekly programme is broadcast the programme recorded on the same day last week is automatically deleted and overwritten by the new programme Save the title of each programme you wish to save then the recorded programme is saved and will not be overwritten by the new programme This week s drama Last week s drama This TUE WED THU FRI Overwritten
25. e f your TV is not stereo capable use the unit s AUDIO OUT connectors to connect to an audio amplifier for Hi Fi stereo sound reproduction e By using the component video connection you can view the images in the progressive mode For switching to the progressive mode refer to Scan Mode Set pg 73 NOTE Select an appropriate option of L 1 OUTPUT as follows pg 66 When your TV s SCART connector accepts Set E T OUTPUT to Composite signals SCART VIDEO Y C signal separated luminance brightness and chrominance colour signals SCART S VIDEO RGB signal SCART RGB Component video signal COMPONENT When the setting selected is not in accordance with the TV connected and depending on the type of appliance connected to the unit the correct picture will not appear 3 Plug the end of the mains power cord into a mains outlet e LOADING blinks on the front display panel when the AC plug of the mains power cord is connected into a mains outlet and it takes approximately 50 seconds for the unit to be turned on This is not a malfunction Auto Set Up Auto Channel Set Auto Clock Set Auto Guide Programme Number Set After the button on the unit or DVD on the remote control is pressed for the first time to turn on the u
26. OFF you can display the various operational indicators by pressing ON SCREEN To clear the operational indicators press ON SCREEN again e When you use this unit as the source player for editing be sure to set SUPERIMPOSE to OFF before starting pg 65 e When you select AUTO during playback the operation mode indicators may be disturbed depending on the type of disc being used BLUE BACK OFF ON When this function is set to the TV screen becomes all blue when receiving a channel not in use NOTE When you want to receive an unstable channel with poor signals set this function to OFF DIMMER BRIGHT DIMMED You can change the brightness of the front display panel BRIGHT Normally select this DIMMED To dim the front display panel Blue lamp on the front display panel is turned off POWER SAVE OFF ON When this function is set to ON you can reduce the power consumption while the unit is turned off NOTES e During Power Save mode the front display panel will be turned off the Just Clock function pg 78 does not work e Power Save does not work when the unit is in the Timer mode the unit s power is turned off after timer recording or Instant Timer Recording the Automatic Satellite Programme Recording mode is engaged gt pg 51 L 2 SELECT is set to DECODER SAT VIDEO or SAT S VIDEO
27. RAI3 RAI3 90 APPENDIX TV Station Channel Number Guide Only the main stations are listed There are in addition many relay stations and full lists are available from the BBC and ITV BBC1 London amp South East Bluebell Hill 40 Crystal 26 Dover Heathfield Ses South West Beacon Hill Caradon Hill Huntshaw Cross Redruth 5 an Stockland Hill Channel Islands Fremont Point 51 South Hannington 39 Midhurst 61 Rowridge 31 West 58 East Sandy Heath 31 Sudbury 51 Tacolneston 62 Midlands Ridge Hill 22 Sutton Coldfield 46 The Wrekin 26 58 North Beltnont one 22 BBC2 64 ITV CH4 43 65 2 30 66 53 64 67 60 53 60 53 25 32 59 65 41 47 28 29 44 47 42 66 58 68 27 21 61 54 24 21 41 47 59 65 25 32 43 50 28 29 61 54 25 32 47 41 CH5 37 49 35 37 39 52 35 35 56 37 BBC1 North West Caldbeck 30 Winter Hill 55 North Eas
28. SELECT ATTENTION Preset positions on the front display panel increase from PR 1 do NOT press any button on the unit or remote control until the front display panel shows clock time PR 1 or as illustrated on page 21 e f you press any button on the unit or remote control while downloading is in progress it will be interrupted NOTES For details refer to the instruction manual of your TV e areas where no TV station transmits a PDC Programme Delivery Control signal the unit can perform neither Auto Clock Set nor Auto Guide Programme Number Set e If there is a power cut or if you press 2 1 or SET UP while downloading or set up is in progress it will be interrupted be sure to turn off the unit power once and try again from the beginning e Auto Clock Set may not function properly depending on the reception condition eOn this unit the characters available for station names ID are A Z 0 9 and space Some names of downloaded stations may differ from those of your TV pg 77 After Preset Download is completed perform Monitor Set on page 23 Results Of Auto Set Up Preset Download Appearing On The Front Display Panel If both Auto Channel Set and Auto Clock Set have been performed successfully the correct current time is displayed Turn on the TV and select its AV mode then make sure that all necessary stations have been s
29. during which no operation can be made HDD lamp CABLE SAT Tv DVD HDD 0 9 PR REC MODE 1 Press HDD so that the HDD lamp lights up on the unit 2 Press PR or the number keys to select the channel you wish to record 3 Press REC MODE repeatedly to select the recording mode then press ENTER e Each time you press REC MODE the recording mode changes as follows SP LP FR60 FR360 FR420 FR480 Back to the beginning The value is selectable from 1 to 6 hours in 5 minutes interval by pressing lt gt repeatedly after selecting FR60 FR360 To change the value in 30 minutes interval press and hold 40 e For details on the recording mode see the right column 4 Press on the unit to start recording Or while holding press gt on the remote control e The HDD recording lamp lights up on the unit 5 Press twice to stop recording e Pressing lil once displays the confirmation message to stop recording Press lil again to terminate recording NOTES e Continuous recording for over 48 hours is not possible e t is not possible to record on both DVD and HDD simultaneously Pause recording on HDD deck It is not possible to pause recording Pressing initiates Live Memory Playback However it is still possible to pause recording
30. pg 26 42 Stop Button pg 26 42 Clear Button CLEAR t pg 35 Skip Search Button 47x pg 28 45 Help button 2 pg 81 One Touch Replay Button GC pg 45 On Screen Button ON SCREEN t pg 16 31 8 Set Up Button SET UP c pg 22 D Progressive Scan Button PROGRESSIVE SCAN t pg 73 B Angle Button ANGLE DVD deck only t pg 29 Live Check Button LIVE CHECK pg 45 How To Use Before use insert two AA size batteries into the remote control with the polarity and matched correctly as indicated on the battery compartment or on the lid The remote control can operate most of your unit s functions as well as basic functions of TV sets and satellite receivers and other brands rs pg 68 e Point the remote control toward the receiving window e The maximum operating distance of the remote control is about 8 m NOTE If the remote control doesn t work properly remove its batteries wait a short time replace the batteries and then try again INDEX 15 Check Contents CHECK ALL THE CONTENTS SHOWN BELOW CABLE SAT 5 TVICBUSAT DVD Video Recorder VIDEO avc _ _ 0 0 0 0 0 PREVIOUS SLOW PLAY SELECT SLOW Q Em REC STOP CLEAR PAUSE RF Cable AA Batteries x 2 21 pin SCART Cable Satellite Controll
31. refer to the instruction manual of your TV Compatible with TVs offering T V Link EasyLink Megalogic SMARTLINK Q Link or DATA LOGIC a fully wired 21 pin SCART cable The degree of compatibility and available functions may differ by system TV Auto Power On The TV will turn on and be set to its AV mode automatically whenever you start playback For details refer to the instruction manual of your TV Unit Auto Standby You can use your TV s remote control to turn off the unit For details refer to the instruction manual of your TV Direct Rec You can easily start recording the programme that you are watching on your TV When you use this function set DIRECT REC to ON pg 72 22 en INITIAL SETTINGS Language e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV DVD gt ENTER Selection Keys Subtitle Language Set DVD deck only Some DVD discs contain the DVD menu display audio and subtitles in multiple languages With these discs you can set the default language as you like e The procedure shows how to set MENU LANGUAGE as example 1 Press SET UP to access the Main Menu screen 2 Press selection keys to select DVD VIDEO SET UP then
32. t pg 67 e t takes some time for the unit to complete initialisation after you turn on the unit power with WAKE UP blinking on the front display panel SUBSIDIARY SETTINGS 73 Scan Mode Set If you connect the unit and TV with Component Video Connection t pg 18 you can select the scan mode from two modes Interlaced scan mode which is used in the conventional TV system and Progressive scan mode which enables reproduction of higher quality images Interlaced scan In the conventional video system a picture is shown on the display monitor in two halves The Interlaced scan system places lines of the second half of the picture in between lines of the first half of the picture Progressive scan Progressive scan displays all the horizontal lines of a picture at one time as a single frame This system can convert the interlaced video from DVD into progressive format for connection to a progressive display It dramatically increases the vertical resolution ATTENTION Your TV needs to be compatible with PAL Progressive e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT Tv DVD gt C Ce _ OO O PROGRESSIVE SCAN CL ou 1 Press PROGRESSIVE SCAN for 3 or more se
33. then stop on the DV equipment e If you pause the DV equipment in this step a few second s still picture will be recorded at the beginning of the recorded programme Set the input mode to DV INPUT on the DV equipment e If you select an input mode other than DV INPUT unwanted pictures may be recorded at the beginning of the recorded programme Perform step 9 to 12 gt To skip unwanted part of the source picture Press ENTER to stop both equipment then press selection keys to select ED m e Locate the point where you want to restart dubbing by pressing gt gt gt lt lt then press Press selection keys to select zv then press ENTER to restart dubbing EDITING 63 Digital Audio Dubbing You can dub selected audio from a DVD or Audio CD disc to a digital audio device However it is not possible to dub copy protected discs e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD Example Dubbing to an MD Recorder Digital audio device MD deck etc Coaxial cable not supplied Optical cable not supplied To DIGITAL To DIGITAL AUDIO OUT AUDIO OUT OPTICAL COAXIAL Rear of unit Note for connection Remove the protection cap from the optical cable 1 Connect the unit and digital audio device us
34. 0 9 clc WA PR le SET UP TV Multi Brand Remote Control Your remote control can operate the basic functions of your TV set In addition to JVC TVs other manufacturer s TVs can also be controlled e Turn off the TV using its remote control e Slide the TV CABLE SAT DVD switch to TV IMPORTANT Although the provided remote control unit is compatible with JVC televisions as well as many other models it may not work with your TV or in some instances may have limited function capability e Keep pressing SET UP down during step 1 1 Enter your TV s brand code using the number keys then press ENTER 2 Press 0 1 on the unit s remote control to turn on the TV and try operations rs step 3 e Once you have set the remote control to operate the TV you do not have to repeat this step until you replace your remote control s batteries e Some brands of TVs have more than one code If the TV does not function with one code try entering another Press the corresponding buttons to operate the TV 0 1 TV AV VIDEO PR TVA TV 3 number keys e For some brands of TVs you must press ENTER after having pressed the number keys REMOTE CONTROL c 69 BRAND NAME CODE BRAND NAME CODE JVC 01 23 24 25 JVC 72 73 FERGUSON 27 AMSTRAD 60 61 62 6
35. Live Memory Playback cannot be performed even if the LIVE MEMORY HDD SET UP is set to other than OFF as temporary recording on HDD stops during recording on DVD Buttons To Be Used During Live Memory Playback e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to select the desired deck for Live Memory Playback CABLE SAT cc DVD HDD DVD aa gt Cur 9 gt LIVE Returns to on air programme screen When a confirmation message appears by pressing this button during timer programming or title editing etc follow the instruction to return to the previous screen NAVIGATION Displays Library Database Navigation menu You can choose a title to play back lt e Pressing once skips back to the beginning of the chapter being played back e Pressing down for 2 or more seconds during playback reverses playback at 5 times the normal speed while pressed Releasing the button resumes normal playback Available only when paused e Pressing down for 2 or more seconds reverses playback at 1 16 times the normal speed gt e Pressing once skips forward to the beginning of the next chapter being played back e Pressing down for 2 or more seconds during playback advances playback at 5 times the normal speed w
36. SET UP gt MANUAL CH SET CH 10 01 25 EDIT RETURN e Repeat steps 3 4 as necessary 5 Press SET UP or RETURN to close the Confirmation screen Set Stations SUBSIDIARY SETTINGS 77 Fine Tuning Channels Already Stored Set station names that are registered in your unit 1 Perform steps 1 5 of Manual Channel Set pg 76 2 Press selection keys to select the channel you want to modify then press ENTER The Confirmation screen appears 3 Press selection keys to select ID then press ENTER 4 Move arrow to the left ID selection column Registered station names ID pg 89 appear as you press the selection keys 5 Press ENTER to select the desired ID then press ENTER again to select Press RETURN to return to the Manual Channel Set screen e Repeat steps 2 5 as necessary 7 Press SET UP or RETURN to close the Confirmation screen Set Stations B Set station names other than the ones registered in your unit 1 Perform steps 1 5 of Manual Channel Set pg 76 2 Press selection keys to select the channel you want to modify then press ENTER The Confirmation screen appears 3 Press selection keys to select ID then press ENTER 4 Press selection keys to select the desired characters A Z 0 9 space then press ENTER e Enter the remaining characters the same way maximum of 4 5 After en
37. VIDEO MODE then press ENTER when DISC WILL BE FORMATTED appears on the TV screen VR To be chosen when you want to record erase or edit data on the disc repeatedly VIDEO MODE To be chosen when you want to erase all the data on the disc once played back to record new data or play back the disc on other DVD players 3 Press selection keys to select EXECUTE then press ENTER NOTES e It is impossible to format Version 1 0 DVD RW discs in Video mode e It is impossible to format DVD R discs e All the titles on a disc will be deleted once the disc is formatted even if they are protected titles rs pg 54 DVD VIDEO SETUP FUNCTION SETUP INITIAL SETUP Disc 5 FINALISE CANC FINALIS 4 HDD SET UP DVD SET FORMAT aM SETUP a ENTER SELECT WITH 4 THEN PRESS ENTER mode PRESS SET UP TO EXIT ext seLect 80 En SUBSIDIARY SETTINGS Finalise A Disc DVD Deck Only DVD DVD EN Audio AE Finalising DVD R RW discs recorded on this unit makes it possible for the discs to be played back on other DVD players DVD RW discs are finalised in the mode that the discs were formatted enabling playback on compatible DVD players Title names input in the Library Database Navigation are registered as title names in the DVD menu rm pg 54 e Turn on the unit e Turn on the TV and select the AV mo
38. aerial cable to the ANTENNA IN connector on the rear panel of the unit 3 Connect the ANTENNA OUT connector on the rear panel of the unit and the TV s aerial connector with the supplied RF cable 4 Connect the L 1 IN OUT connector on the rear panel of the unit and the TV s 21 pin SCART connector with a supplied 21 pin SCART cable e The L 1 IN OUT connector accepts and delivers either a composite signal regular video signal Y C signal or RGB signal e Set your TV to the VIDEO or AV Y C or RGB mode according to the type of your TV s SCART connector W S Video Connection To connect to TV s S VIDEO input and AUDIO input connectors 1 Perform 1 3 in Basic Connection 2 Connect the unit s S VIDEO OUT connector to the TV s S VIDEO input connector 3 Connect the unit s AUDIO OUT connectors to the TV s AUDIO input connectors e You can obtain high quality S VHS pictures e f your TV is not stereo capable use the unit s AUDIO OUT connectors to connect to an audio amplifier for Hi Fi stereo sound reproduction Component Video Connection To connect to TV s component video input connectors 1 Perform 1 3 in Basic Connection 2 Connect the unit s COMPONENT VIDEO OUT connectors to the TV s component video input connectors Connect the unit s AUDIO OUT connectors to the TV s AUDIO input connectors e You can obtain high quality component video pictures
39. and hold PROGRESSIVE SCAN until J disappears from the front display panel pg 73 Playback does not start or stop immediately after playback is started by pressing On the front display panel NO DISC appears e The disc is loaded upside down Place the disc on the disc tray with the playback surface facing down pg 9 e Adisc not being compatible with the unit is loaded Load a playable disc on the unit pg 6 e A dirty disc is loaded Clean the disc pg 10 e Defective disc is loaded Replace the warped or scratched disc with a normal one Images are blurred or distorted when you start High Speed Search Images are blurred or distorted at the point where the playback speed changes and this is not a malfunction of the unit Playback does not start Playback does not start for approximately 30 seconds after recording is stopped and this is not a malfunction of the unit Playback does not start when you select a title or a chapter e The Parental Lock is engaged and the disc is rated higher than the set level Release the Parental Lock temporarily or change the set level t pg 36 Playback HDD Deck The HDD deck cannot be operated e The HDD deck is not selected Press HDD so that the HDD lamp lights up on the unit Recording DVD Deck The desired programme cannot be recorded e The channel position does not correspond to
40. c pg 27 Selection Keys AV lt D vs pg 19 Menu Button MENU pg 27 Reverse Skip Button 4 v pg 27 45 43 Previous Button PREVIOUS pg 30 B Reverse Search Button lt lt pg 27 45 Reverse Slow Button SLOW pg 28 Record Button v pg 37 40 Jump Button JUMP t pg 28 43 D Recording Mode Button REC MODE pg 37 40 Display Button DISPLAY t pg 29 38 Automatic Satellite Programme Recording Button SATO t pg 51 VPS PDC Recording Button VPS PDC pg 48 4 Audio Button AUDIO pg 30 Subtitle Button SUBTITLE t pg 30 TV CABLE SAT DVD switch c pg 22 DVD STANDBY ON Button DVD6O I TV CBL SAT STANDBY ON Button TV CBL SAT I pg 68 DVD Button c pg 26 This button will not function during navigation mode or set up mode TV Volume Buttons pg 68 Programme Buttons PR t pg 37 68 Memo Button MEMO c pg 53 57 Mark Button MARK pg 29 Programming Button PROGRAMME t pg 47 49 50 Edit Button EDIT pg 53 Navigation Button NAVIGATION t pg 52 Enter Button ENTER c pg 19 Return Button RETURN c pg 30 33 47 Forward Skip Button gt i vx pg 27 45 Next Button NEXT c pg 30 Forward Search Button gt gt c pg 27 45 Forward Slow Button SLOW pg 28 Play Button gt c pg 26 42 Select Button SELECT t pg 59 Pause Button 1
41. e Pressing the unit s I button while Automatic Satellite Programme Recording is in progress turns off the unit s power and disengages the Automatic Satellite Programme Recording mode e If there are more than one satellite programmes you wish to record with Automatic Satellite Programme Recording it is not possible to set different recording modes for each programme e Depending on the type of satellite receiver the unit may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme e If you engage the Automatic Satellite Programme Recording mode when the satellite receiver s power is on the unit will not start Automatic Satellite Programme Recording even though blinks on the front display panel When the satellite receiver shuts off once and is turned back on again the unit starts recording You can also record a programme from your cable system in the same way if the system has a timer e Just Clock t pg 78 does not work when the Automatic Satellite Programme Recording mode is engaged 52 en NAVIGATION Library Database Navigation DVD DVD MIS TIG DARA 0 The Library Database Navigation enables you to search and select the desired titles recorded on the HDD deck and the DVD deck very easily You can record up to 99 titles on a disc Each time a title is recorded the information of the title is registered for the Library Data
42. e You cannot use RetroActive Recording for channels other than the channel you are currently watching e Recording speed is automatically set to FR65 mode when RetroActive Recording is started e Temporarily recorded data prior to the beginning of RetroActive Recording is erased when RetroActive Recording started You can play back the previous part of the channel you are recording or other programs available in the Library Database Press NAVIGATION The Library Database Navigation screen NAVIGATION HDD NAVIGATION appears ORIGINAL PLAY LIST 3 SELECT WITH f 2 Press selection keys THEN PRESS ENTER to select ORIGINAL PRESS NAVIGATION then press ENTER uu 3 Press selection keys to select the desired title then press ENTER e For DVD RAM playback starts from the beginning of the title if CONTINUOUS PLAY in DVD SET is set to pg 72 4 Press selection keys to select the desired playback method BEGINNING RESUME or REPEAT then press ENTER e Playback of the selected title begins automatically 5 Press to stop playback e The on air screen resumes NOTES e You can use various playback features during Live Memory Playback t pg 42 e stop simultaneous playback press The on air screen resumes To stop actual recording press again HDD LIBRARY NAVIGATION am ENTER EXT suc Navigation top
43. or subject to vibration 2 DO NOT block the unit s ventilation openings or holes If the ventilation openings or holes are blocked by a newspaper or cloth etc the heat may not be able to get out 3 DO NOT place heavy objects on the unit or remote control 4 DO NOT place anything which might spill on top of the unit or remote control If water or liquid is allowed to enter this equipment fire or electric shock may be caused 5 DO NOT expose the apparatus to dripping or splashing 6 DO NOT use this equipment in a bathroom or places with water Also DO NOT place any containers filled with water or liquids such as cosmetics or medicines flower vases potted plants cups etc on top of this unit 7 DO NOT place any naked flame sources such as lighted candles on the apparatus 8 AVOID violent shocks to the unit during transport MOISTURE CONDENSATION Moisture in the air will condense on the unit when you move it from a cold place to a warm place or under extremely humid conditions just as water droplets form on the surface of a glass filled with cold liquid In conditions where condensation may occur disconnect the unit s power plug from the wall and keep it disconnected for a few hours to let the moisture dry then turn on the unit ATTENTION To mobile phone users Using a mobile phone in the vicinity of the unit may cause picture vibration on the TV screen or change the screen to a blue back display On placing t
44. play back TV programmes recorded beyond the specified range of time since they are already overwritten To avoid this in order to save titles perform normal recording rs pg 40 timer recording rs pg 47 49 or RetroActive Recording t pg 46 About limitation on temporary recording The temporary recording for Live Memory is cancelled in the following cases and will start all over again when it is to resume e When the power is turned off e When the system is powered again after a power failure was occurred e When normal recording timer recording RetroActive Recording or Automatic Satellite Programme Recording t pg 51 is performed e When the LIVE MEMORY setting is changed pg 72 e When tuner channel setting is performed rs pg 75 e When dubbing is performed by pressing DUBBING t pg 60 e When DV is selected by pressing PR t pg 62 RetroActive Recording HDD deck only You can start recording from the previous part of the channel you are currently watching temporarily recorded on the background pg 46 Temporary recording for Live Memory HDD deck only 1 Press mea or 4 to locate the point to start recording from e Each press of lt lt increases the reverse search speed 2 Press on the unit to start RetroActive Recording Or while holding press gt on the remote control 3 Press to stop RetroActive Recording e The on air screen resumes NOTES
45. possible to dub simultaneously when timer programming is set Select either dubbing or timer programming e The order of the index which is displayed by pressing DUBBING differs from the images displayed by pressing NAVIGATION or EDIT High Speed Dubbing From HDD To DVD It is possible to dub the original recordings and or play lists on the HDD deck to DVD discs The dubbing is performed in high speed keeping the original transfer rate NOTES e After accessing the Dubbing Menu screen it is not possible to take out a disc e It is not possible to dub copy once titles in Video mode e When dubbing a copy once title the data will be moved from HDD to DVD upon completing dubbing e When you cancel dubbing a copy once title during dubbing the original recording on the HDD deck remains and the title copied to a DVD disc is deleted e t is not possible to dub play lists which contain copy once titles e It is not possible to dub the following programmes to DVD R RW disc Video mode which contains more than one audio language which is on the play list which is edited also RetroActive Recording which is recorded in LP mode or FP155 FP240 mode e Recording may not be performed in the highest speed depending on the characteristics of the disc used 1 Load a recordable disc 2 Press DUBBING to access the Dubbing Menu screen 3 Press selection keys to select HDD DVD DUBBING then press E
46. press V 3 Press selection keys to amp DVD VIDEO SET UP HDD DVD SETUP FUNCTION UP INITIAL SET UP eee LANGUAGE SET AUDIO OUTPUT PARENTAL LOCK DISC PLAY SET UP 5 i MENU LANGUAGE 4 Press selection keys to ENGLISH select MENU LANGUAGE then press ENGLISH ENTER 5 Press selection keys to select your desired VOLU exit SELECT language then press ENTER e See Language Code List pg 86 6 Press SET UP to complete the setting NOTE When the selected language is not available on the disc the disc s default menu language is played back Set You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide screen TVs e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT Tv DVD gt ENTER Selection Keys AVI INITIAL SETTINGS EN 23 1 Press SET UP to access the Main Menu screen e You cannot set the monitor type during recording or playback 2 Press selection keys to select FUNCTION SET UP then press V 3 Press selection keys to select VIDEO IN OUT then press V 4 Press selection keys to select MONITOR TYPE then press ENTER 5 Press sele
47. screen for HDD deck One Touch Replay You can move back the playback position slightly during recording or Live Memory Playback Press G DVD RAM e Pressing once during recording skips back for approximately 30 seconds and starts Live Memory Playback While pressing once during Live Memory Playback skips back for approximately 7 seconds and resumes playback e Each subsequent press skips back for approximately 7 seconds and resumes playback e Pressing while paused skips back for approximately 7 seconds and resumes pause HDD e Pressing during recording skips back for approximately 7 seconds and starts Live Memory Playback While pressing during Live Memory Playback skips back for approximately 7 seconds and resumes playback e Each press skips back for approximately 7 seconds and resumes playback e Pressing while paused skips back for approximately 7 seconds and resumes pause Resuming Playback HDD deck only You can resume playback of a TV broadcast you were recording or watching from the point you have paused 1 Press II to pause TV broadcast e Recording continues when recording 2 Press to start Live Memory Playback e Playback resumes from the paused position 3 Press to resume the on air screen J video Plus Timer Programming You can programme this unit to timer record as many as 16 programmes With the VIDEO Plus system timer programming is greatly simplified because
48. select EXIT then press ENTER to return to the normal screen Press EDIT to return to the normal screen NOTES e There may be a discrepancy of several seconds between the Scene you intend to edit and the scene which is actually edited e The title index and category of the play list can be modified in the same way as ORIGINAL pg 53 e You can modify the play list that has just been created here by adding moving or deleting unwanted parts to create a digest edition etc Edit Scenes M EDITING gt PLAY LIST CREATE TOTAL 00 00 00 E 0 00 15 gt 1 Press EDIT The Editing screen appears 2 DVD deck only Press selection keys to select MODIFY under ORIGINAL PLAY LIST then press ENTER 3 Press selection keys to select MODIFY under PLAY LIST ORIGINAL then press ENTER SELECT WITH 4 4 Wes keys uus to select a play list to iur apogr oee modify then press Wear LM dial ENTER EDIT ENTER 14 PLAYLIST 0 7 lt SELECT 5 Press selection keys to select SCENE then press ENTER 6 Press selection keys to select MODIFY then press ENTER 7 Press selection keys to select the start or end point of a scene to modify then press ENTER 8 Perform steps 5 11 in Create Play List pg 56 Add scenes NAVIGATION 57 Delete Play List 1 Perform steps 1 5 of Edit Scenes pg
49. selection keys to select the desired option then press ENTER NORMAL Normally select this option CINEMA Suitable for a movie disc etc SHARP Clearer sharper edged picture when viewing images with lots of flat same coloured surfaces such as cartoons SOFT Select this option when too much noise appears To clear the on screen bar Press ON SCREEN DVD DVD VCD Dt RAM VIDEO SVCD CD You can obtain optimal picture quality by selecting whether the content on the disc is processed by field video source or by frame film source 1 Set the unit to the progressive scan mode gt pg 73 2 Press ON SCREEN twice to access the on screen bar 3 Press selection keys to select Tey then press ENTER The pop up window appears under the selected item TITLE 99 CHAPTER 99 EACH 0 00 DVD 3D ON CINEMA AUTO w gt Ow E 4 Press selection keys to select the desired option then press ENTER AUTO This mode automatically detects film and video content for progressive playback When film content is found flag detection is used to invoke playback of film data in full screen When video content is found pictures from multiple fields are used to detect sections with movement and then this movement undergoes advanced image processing for output of sharp detailed progressive images without any reduction in image quality where movement occurs Normally operation in this mode is re
50. such as deleting unwanted parts DVD RW Video mode e Can be played back on other DVD players e New recording can be performed by erasing all the data on a disc once played back DVD R e Can be played back on other DVD players e Suitable when keeping a recorded disc for a long time File Structure Of Discs DVD VIDEO Typically DVD VIDEO discs are made up of larger units called titles Each title has a number title number that can be used to select desired titles Titles are further divided into units called chapters Each chapter has a number chapter number that can also be used to select desired chapters Note that some discs are not divided into titles and chapters When you record a programme on a DVD RAM RW VR mode disc A single recording session results in a single title a single chapter However chapter marks are automatically inserted when recording is paused or audio changes from monaural to stereo due to commercial breaks etc It is also possible to insert chapter marks at desired locations during playback pg 29 When you record a programme on a DVD R RW Video mode disc A single recording session results in a single title a single chapter However chapter marks are automatically inserted when recording is paused or audio changes due to commercial breaks etc It is also possible to insert chapter marks at desired locations during either recording or playback Once the disc has been fina
51. the Guide Programme number s broadcast is received by the unit or the satellite receiver Then press ENTER e Pressing AUX changes TV PROG to SAT e To timer record a satellite programme with the VIDEO Plus system you need to install the provided Satellite Controller and perform the procedure described in Satellite Receiver Control Setting pg 24 e Repeat steps 5 7 as necessary 8 Press SET UP to complete the setting Guide Programme Number Guide Programme GUIDE PROG number refers to the assigned TV station numbers according to broadcast area for the VIDEO Plus timer recording The Guide Programme Numbers can be found in most TV listings Toner Set Your unit needs to memorise all necessary stations in channel positions in order to record TV programmes Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the PR buttons without going through any vacant channels e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV DVD ENTER Selection Keys AVS SET UP IMPORTANT Perform the following steps only if Auto Channel Set has not been set correctly by Auto Set Up or by Preset Download gt pg 19 20 you have moved to a different area or if a new station
52. the station names may not be stored correctly IMPORTANT e In certain reception conditions station names may be stored correctly and Auto Guide Programme Number Set may not work properly When the Guide Programme numbers are not set properly the programme that you do not intended to record will be timer recorded by the VIDEO Plus system of the unit When programming the timer using the VIDEO Plus System be sure to check the desired channel is selected correctly pg 47 e Your unit memorises all receivable stations even if reception of some of them is poor You can delete those stations with an unacceptable picture from the list pg 76 Delete A Channel NOTES e Fine tuning is performed automatically during Auto Channel Set If you want to perform tuning manually refer to Fine Tuning Channels Already Stored rs pg 77 e If you perform Auto Channel Set when the aerial cable is not connected properly SCAN COMPLETED NO SIGNAL appears on the TV screen in step 5 In such a case make sure of the aerial connection and press ENTER Auto Channel Set will start again 76 SUBSIDIARY SETTINGS Manual Channel Set Delete A Channel Store channels that were not stored during Auto Set Up t pg 19 Preset Download rs pg 20 or Auto Channel Set pg 75 1 Press SET UP to access the Main Menu screen 2 Press selection keys to select INITIAL SET UP then press V 3 Pres
53. the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT Hoo Selection Keys Various modes of this unit are categorized into menus nested in 2 levels shown in the following table To change the settings of these modes find the desired mode in the menu for details on each menu see pages 71 through 73 then follow the procedure below DVD VIDEO SET UP LANGUAGE SET rs pg 22 AUDIO OUTPUT t amp pg 71 PARENTAL LOCK pg 36 DISC PLAY SET UP rs pg 72 HDD DVD SET UP HDD SET UP rs pg 72 DVD SET UP pg 72 DISC SET UP pg 79 80 FUNCTION SET UP REC PLAY SET UP rs pg 72 DISPLAY SET pg 73 VIDEO IN OUT pg 23 66 INITIAL SET UP TUNER SET rs pg 75 CLOCK SET pg 78 e The procedure below shows how to set the desired option of the AUDIO REC mode as an example 1 Press SET UP to access the Main Menu screen 2 Press selection keys to select FUNCTION SET then press V 3 Press selection keys to select REC PLAY SET then press v i eser gt 4 Press selection keys d eed AUDIO aren DLL NENNEN NENNT 5 Press selection keys to select the desired option then press ENTER Dy FUNCTION SETUP REC PLAY SET UP DISPLAY SET VIDEO IN OUT
54. then press ENTER e Playback starts from the selected section Examples To select track 5 press the number key 5 To select track 15 press the number key 1 and 5 To select track 25 press the number key 2 then 5 If you have specified a wrong selection Press RETURN on the remote control and repeat the above procedures from step 2 To clear the on screen bar Press ON SCREEN NOTES e When is displayed on the TV screen in step 4 the chapter you have selected is not contained in the disc or chapter search does not work on the disc e Before you press ENTER playback may start automatically when you enter the section s number depending on the disc e This function is not possible for a Video CD SVCD with PBC function BASIC OPERATIONS ON DVD DECK ey 33 CABLE SAT m e 0 9 G CANCEL ENTER GW lt gt Selection Keys m TZ RETURN M gt gt gt IIZI 1 n CLEAR 85966 e 5 Time Search DVD DVD Audio RAM VIDEO cD You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a programme DVD RAM DVD R DVD RW DVD VIDEO and HDD or a disc Video CD SVCD and Audio CD 1 Press ON SCREEN twice to access the on screen bar
55. to OFF Format A Disc DVD Deck Only DVD DVD MEN Audio RAM VIDEOR SVCD CD Some DVD RAM RW discs are unformatted Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc ATTENTION e When a disc is formatted all recordings and data are erased It is impossible to restore them e Never turn off the unit or disconnect the mains power cord while NOW FORMATTING is displayed on the TV screen e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Load a DVD RAM RW disc to format CABLE SAT ENTER Selection Keys SET UP SUBSIDIARY SETTINGS 79 Format A DVD RAM Disc 1 Press SET UP to access the Main Menu screen 2 Press selection keys to select HDD DVD SET UP then press V 3 Press selection keys to select DISC SET UP then press V 4 Press selection keys to select FORMAT then press ENTER Press selection keys to select OK then press ENTER 5 Press selection keys to select EXECUTE then press ENTER Format A DVD RW Disc 1 Perform steps 1 to 3 of Format A DVD RAM Disc as above before continuing 2 Press selection keys to select FORMAT then press ENTER Press selection keys to choose VR MODE or
56. 3 92 FINLUX 30 CANAL 81 FUNAI 32 D BOX 85 LG GOLDSTAR 18 ECHOSTAR VIA DIGITAL 82 GRUNDIG 19 FINLUX 68 HITACHI 10 FORCE 89 ITT 28 GALAXIS 88 MITSUBISHI 03 GRUNDIG 64 65 MIVAR 29 HIRSCHMANN 64 NEC 20 ITT NOKIA 68 NOKIA 31 KATHREIN 70 71 PANASONIC 04 11 LUXOR 68 PHILIPS 02 MASCOM 93 RCA 05 MASPRO 70 SAMSUNG 12 33 34 35 NOKIA 87 SANYO 13 16 PACE 67 86 92 SHARP 06 PANASONIC 13 14 74 SONY 07 PHILIPS 66 84 THOMSON 26 RFT 69 TOSHIBA 08 14 SAGEM 83 SALORA 68 SAMSUNG 05 24 Satellite Receiver Multi Brand Remote Control SKV DIGIBOX do Your remote control can operate the basic functions of your SKYMASTER 69 satellite receiver set In addition to JVC satellite receivers other TPS 83 manufacturer s satellite receivers can also be controlled TRIAX 91 e Slide the TV CABLE SAT DVD switch to CABLE SAT SS id IMPORTANT Although the provided remote control unit is compatible with JVC satellite receivers as well as many other models it may not work with your satellite receiver or in some instances may have limited function capability e Keep pressing SET UP down during step 1 1 Enter your satellite receiver s brand code using the number keys then press ENTER 2 Press on the unit s remote control to turn on the satellite receiver and try operations gt step 3 e Once you have set the remote control to operate the satellite receiver you do not have to repeat this step until you replace your re
57. 3rd D 4th E 5th Blank When the same programme is recorded in SP mode instead of in FR125 the 5th programme cannot be recorded A 1st B 2nd C 3rd D 4th E Blank 20 min Blank NOTES e You can programme this unit to timer record regardless of the disc remaining time When the disc remaining time is not enough the unit performs Relief Recording rs pg 49 To avoid this make sure of the disc remaining time before setting timer programming Example If you programmed to timer record for 60 minutes in SP mode on a 120 minute disc the disc remaining time would be 30 minutes in XP mode 60 minutes in SP mode 120 minutes in LP mode 180 minutes in EP mode and 240 minutes in FR480 mode Timer recording will not complete beyond these remaining times e The maximum recording time of FR JUST mode is the same as the recording time of FR480 mode When timer programming long programme in FR JUST mode on a disc whose remaining time is short it is recommended to check the disc remaining time in FR480 mode to see if the remaining time is enough for the programme e Even if more than one programme are timer programmed in FR JUST mode only the first one is recorded e In order to ensure that the recording fits on the disc this feature may leave a slight non recorded section at the end of the disc e There may be some noise and sound disturbance at the point on the disc where the unit switches the mode
58. 56 before continuing 2 Press selection keys to select SEL TITLE then press ENTER 3 Perform steps 4 11 in Create Play List pg 56 Move Scenes 1 Perform steps 1 5 of Edit Scenes pg 56 before continuing 2 Press selection keys to select MOVE then press ENTER 3 Press selection keys to select a scene to move then press ENTER 4 Press selection keys to select another scene to which the scene is to be moved then press ENTER e To cancel the move press selection keys to select RETRY then press ENTER 5 Perform steps 9 11 in Create Play List pg 56 Delete Scenes 1 Perform steps 1 5 of Edit Scenes t pg 56 before continuing 2 Press selection keys to select DELETE then press ENTER 3 Press selection keys to select a scene to delete then press ENTER 4 steps 9 11 in Create Play List pg 56 Play Back Play List 1 Press EDIT The Editing screen appears 2 DVD deck only Press selection keys to select MODIFY under ORIGINAL PLAY LIST then press ENTER 3 Press selection keys to select DELETE coming under PLAY LIST ORIGINAL then press ENTER 4 Press selection keys Saul Ree THEN PRESS ENTER PLAY LIST to select one play list you want to delete T lanes then press ENTER 5 Press selection keys to select DELETE then press ENTER e When you cancel the deletio
59. 6 42 Pause Button pg 26 42 Record Button 0 pg 37 40 HDD Button pg 40 e This button will not function during navigation mode or set up mode DVD Button pg 26 e This button will not function during navigation mode or set up mode Standby On Button STANDBY ON D Video Lamp VIDEO pg 38 41 B S video Video Audio Input Connector S VIDEO VIDEO AUDIO MONO L R gt pg 64 DV Input connector DV IN pg 62 7 i Link refers to the IEEE1394 1995 industry specification and extensions thereof The logo is used for products compliant with the i Link standard HDD Lamp HDD pg 40 DVD Lamp DVD pg 26 12 en INDEX Rear View VIDEO OUT our 5 RIGHT LEFT 7 our COMPU PCM STREAM IN DECODER COAXIAL 00000000 OPTICAL 5 11 ANTERINA Antenna Input Connector ANTENNA IN t pg 18 Component Video Output Connectors COMPONENT VIDEO OUT Y Ps Pr gt pg 18 S video Output Connector S VIDEO pg 18 Audio Output Connectors AUDIO OUT RIGHT LEFT t pg 63 70 AV COMPU LINK Connector Not function with this unit Digital Audio Output Connectors DIGIT
60. 97 SAGEM 83 90 SALORA 68 SAMSUNG 83 SIEMENS 64 SKY DIGI BOX 92 SKYMASTER 69 98 TECHNISAT 66 100 THOMSON 97 TPS 83 TRIAX 91 WISI 64 NOTES The Satellite Controller may not work with all types of satellite receiver e For some satellite receivers you need to set its channel input mode to 2 digit e If your satellite receiver has more than two channel modes be sure to set to All Channel Mode For details refer to the instruction manual of the satellite receiver e When selecting the satellite receiver s channel rs step 9 signals from the remote control may interfere with signals transmitted from the Satellite Controller In this case move the remote control as close to the unit s infrared beam receiving window as possible SAT CONTROL SET Ey 25 26 EN BASIC OPERATIONS ON DVD DECK Basic Playback E kd E E23 E3 C2 55 e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD gt DVD CABLE SAT D DVD On DVD GGG G 9G O D ENTER amp 0 0 g HOW O Of 095 Lt ATTENTION e It takes approximately 30 seconds to read a disc depending on the type and condition of the disc since this unit is multi disc com
61. AL AUDIO OUT OPTICAL COAXIAL pg 63 70 Cooling Fan e This prevents the temperature from rising inside the unit Do not remove it e Install the unit so as not to block the area around the fan e The unit may become hot when it is turned off as the cooling fan on the rear of the unit is not activated However the cooling fan may be activated in the following cases n the Automatic Satellite Programme Recording standby mode t pg 51 slightly before the starting time of VPS PDC recording pg 48 f you connect the decoder or satellite receiver to L 2 IN DECODER and if L 2 SELECT is set to DECODER SAT VIDEO or SAT S VIDEO pg 67 When JUST CLOCK is set to rs pg 78 Set JUST CLOCK to OFF if you mind the noise of the fan AC Power Cord pg 18 Antenna Output Connector ANTENNA OUT t pg 18 L 1 Input Output Connector L 1 IN OUT pg 18 65 70 L 2 Input Decoder Connector L 2 IN DECODER pg 24 65 70 The decoder function of this unit is not available in the U K D Satellite Control Connector SAT CONTROL pg 24 B Region Number Label t pg 7 Front Display Panel INDEX 13 TITLE HDD DVD VPS PDC Indicator t pg 48 Appears when checking if the station being received transmits a VPS PDC signal Disc Type Indicator When a disc is loaded the type of the di
62. AN NOT PLAY e The unit has detected invalid contents at the start or in the middle of playback THE i LINK DEVICE THAT YOU HAVE CONNECTED IS NOT RECOGNIZED MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND POWERED ON e An attempt has been made to start DV dubbing when a digital video camera is not properly connected to the unit e Check the connection pg 62 GENERAL Power requirement AC 220 V 240 V 50 Hz 60 Hz Power consumption Power on 37 W Power off 15 6 W Temperature Operating 5 C to 35 Storage 20 to 60 Operating position Horizontal only Dimensions WxHxD 435 mm x 70 mm x 345 5 mm Weight 6 1 kg Input Output Video input 0 5 2 0 Vp p 75 Q pin jack Audio input 8 dB 50 pin jack Corresponding to mono left Audio output 8 dB 1 pin jack 21 pin SCART connectors IN OUT x 1 IN DECODER x 1 S video input Y 0 8 1 2 Vp p 75 Q 0 2 0 4 Vp p 75 Q S video output Y 1 0 Vp p 75 O C 0 3 Vp p 75 9 i Link 4 pin for DV input Component video output Y 1 0 Vp p 75 O Pp Pn 0 7 Vp p 75 Corresponding to copy protection SAT Control 93 5 mm Digital audio output Optical 18 dBm 660 nm Coaxial 0 7 Vp p 75 Q Corresponding to Dolby Digital and DTS Digital Surround Bit stream Selectable in digital audio output setting menu VIDEO AUDIO DVD Deck Recording time Maximum 8 hours with 4 7 GB disc XP Approx 1 h
63. ATE and DISC No are available for the DVD deck only 3 Press selection keys to select the desired title then press ENTER e Playback begins automatically after the selected title is located NOTE If a disc registered in the library is recorded or modified on DVD units from other manufacturers it may become impossible to operate properly Zein DVD NAVIGATION 2 DVD LIBRARY DATE 4 DISC SELECT WITH 4 THEN PRESS ENTER MUGATON ap ENTER ni exit Register Disc When a disc that is not registered in the library is loaded a message appears confirming if the disc should be registered If registering perform the following procedure Press selection keys to select REGISTER then press ENTER to confirm the registration 2 Press NAVIGATION to return to the normal screen NOTES e It is not possible to register discs formatted on devices other than JVC s DVD recorders e It is not possible to register discs recorded on devices other than JVC s DVD recorders e It is not possible to register discs when SAVE AS LIBRARY is set to OFF pg 72 Playback With Navigation L2 E3 Ed E1E3 E3 E3 This unit can play back discs that MP3 WMA sound files and JPEG image files taken with digital still cameras or other devices are recorded The MP3 WMA JPEG Navigation enables you to search and select the desired files recorde
64. AYBACK 44 Live Memory 44 TIMER RECORDING 47 VIDEO Plus Timer Programming sse 47 Manual Timer Programming eee 49 Automatic Satellite Programme Recording HDD Deck Only tentent reete nes 51 CONTENTS EN 5 NAVIGATION 52 Library Database Navigation 52 Edit Original Information 53 Edit Play List 56 Edit Library Information 58 Playback With MP3 WMA JPEG Navigation 59 EDITING 60 Dubbing piii rne rente ree ri een 60 DV Dubbing 62 Digital Audio Dubbing 63 Edit From A 64 Edit To Or From Another Recorder 65 cine ce n dede ree dde nate 66 REMOTE CONTROL 68 Remote Control Functions eee 68 SYSTEM CONNECTIONS 70 Connecting To A Satellite 70 Connecting To A Dolby Digital Decoder Or An Amplifier With Built in 70 SUBSIDIARY SETTINGS 71 Set once e C a 71 Scan Mode Set 73 VIDEO Plus System Setup s sss 74 Uem 75 Clock Set 78 Format A Disc DVD Deck Only
65. After recording the unit s power shuts off automatically ATTENTION e When you record programmes by connecting to a digital terrestrial receiver Freeview receiver or similar perform the same steps as Automatic Satellite Programme Recording HDD Deck Only pg 51 It is not possible to operate the digital terrestrial receiver Freeview receiver or similar by using the provided satellite controller e Be sure not to turn on the satellite receiver before the programme is executed otherwise the unit will start recording when the satellite receiver s power is turned on e If you have connected another appliance other than a satellite receiver to the L 2 IN DECODER connector be sure not to engage the Automatic Satellite Programme Recording mode otherwise the unit will start recording when the connected appliance s power is turned on e Automatic Satellite Programme Recording and timer recording cannot be done at the same time HDD 0 ooo 6900 CABLE SAT TV DVD HDD 00 00 Y a 0 LJ y 09 TIMER RECORDING 51 e Make sure the satellite receiver is connected to the unit s L 2 IN DECODER connector e Programme the
66. CAR 10 04 0 30 04 10 2002 87 RALLY CAR ED 10 04 0 30 04 10 2002 88 Chobits 04 OP 02 05 PR10 02 05 2002 89 Chobits 04 ED 02 05 PR10 02 05 2002 90 Chobits 25 ED 26 09 PR10 MN32 LPCM 26 09 2002 Cw NEXT DISC INFORMATION 7 Unplayable Discs Discs For Playback Only You can use discs with the following logos for playback only DVD VIDEO Video CD Super Video CD COMPACT COMPACT ee GIG WISE example of region code indications DIGITAL VIDEO SUPER VIDEO 2 25 VIDEO CD IDEO 98 compact Audio CD coMPACT CD R CD DA files CD DA JPEG SE DIGITAL AUDIO Recordabie 0 CD RW 0 CD ROM CD DA JPEG JPEG MP3 files 156 files SiG e Playback may not be performed depending on the characteristics and condition of the disc used e DTS Audio CDs can also be played back An optional DTS decoder is required e MP3 and JPEG discs can be played back on this unit only when they have been recorded in the ISO9660 or Joliet format and finalised e JPEG files that can be played back on this unit must conform to JFIF Baseline process and the maximum resolution of a JPEG file is 2 812 pixels in width and 2 112 pixels in height e CD R RW discs recorded in music CD format need to be finalised to play back on this unit e Operation and audio quality of this unit are not guaranteed for discs that do not conform to the Compact Disc speci
67. E 12 Press selection keys to select EXIT then press ENTER to complete timer programming e To programme another timer press selection keys to select CONTINUE then press ENTER e If PROGRAMME OVERLAPPED appears on the TV screen delete or modify the programmes NOTES e When two successive programmes are recorded on a DVD RW disc with Manual Timer Programming function the beginning of the second one may be left off the recording e If the copy limited programme is received during timer recording the unit enters Record Pause mode Recording starts again if it is Switched to a recordable broadcast during the time you programmed BBC EDUCATION FR360 1 00 GS 28 00 ___ __ THEN PRESS ENTER recens EDUCATION WEEKLY DAILY MON FRI FOR A WEEK ae PRUBUME am ENTER EXT SugT Satellite Receiver Users To timer record a satellite broadcast using Manual Timer Programming 1 Perform Satellite Receiver Control Setting rs pg 24 2 Perform Manual Timer Programming rs pg 49 In step 8 press AUX to change TV PROG to Then press selection keys to enter the channel position for the satellite broadcast 3 Leave the satellite receiver s power on Relief Recording When a programme that is set for the DVD deck cannot be recorded properly the programme is recorded to the HDD deck inst
68. IFY under ORIGINAL PLAY LIST then press ENTER 3 Press selection keys to select DELETE TEM under ORIGINAL ORIGINAL then press ENTER gt SELECT WITH 4 4 Press selection keys THEN PLAY LIST to select a title you PES EDIT Mou want to delete then TOEXT press ENTER 5 Press selection keys to select DELETE then press ENTER e When you cancel the deletion select CANCEL then press ENTER 6 Press EDIT to return to the normal screen eS T ORIGINAL 14 PLAYLIST 0 EXT P SELECT Delete Unwanted Part Of The Title DVD RAM amp DVD RW VR mode only You can delete unwanted part of the title 1 Perform steps 1 2 of Modify Index rs pg 53 before continuing 2 Press selection keys to select DEL SCEN then press ENTER 3 Press selection keys to select a title whose unwanted part you want to delete then press ENTER 4 Press gt to start playback Press lt lt or gt to find the point where you want the deletion to begin then press 5 Confirm the arrow is on IN then press 21 12 03 SUN 18 30 20 00 PR 12 ENTER RALLY CAR B OTHERS SP 6 Press gt to start playback Press 44 gt gt to find the point where you want the B PROG 1 0 01 08 gt deletion to end then SELECT SCENE TO DELETE WITH t ON REMOTE press IM Ea mew ox 7 Press selection keys to sele
69. IGATION gt PLAY LIST 0026 FISH WORLD 59143 MIN 026 CREATED 26 12 03 FRI TEDDY BEAR 25 12 MOVIES ED 2009 PRESS NAVIGATION TO EXIT Modify Play List Name 1 Perform steps 1 4 of Edit Scenes pg 56 before continuing 2 Perform steps 2 6 of Modify Title Name pg 54 Modify Category 1 Perform steps 1 4 of Edit Scenes pg 56 before continuing Perform steps 2 4 of Modify Category pg 54 58 en NAVIGATION Eit Library Information DVD DVD MIS TIG RAM irs Title information be registered in the unit s memory for up to 600 DVD discs 2 000 titles It is helpful when finding a desired title or play list by sorting according to the sort options registered during or after recording e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to choose the corresponding deck CABLE SAT TV DVD DVD ENTER Selection Keys Scan For Title From Library 1 Press NAVIGATION The Library Database Navigation screen appears 2 Press selection keys to select the appropriate sort button to sort the information then press ENTER DATE Sort by date OM LM DISC No Sort by disc number CATEGORY Sort by category NAME Sort by name e D
70. LE SAT DVD switch to DVD e Press HDD or DVD to choose the corresponding deck ATTENTION other manufacturers performing timer recording e t is not possible to modify discs recorded on DVD units from e You cannot perform timer recording during editing the index by pressing EDIT Press EDIT to clear the editing screen before Modify Index 1 Press EDIT The Editing screen appears 2 DVD deck only Press selection keys to select MODIFY under ORIGINAL PLAY LIST then press ENTER 3 Press selection keys to select MODIFY under ORIGINAL then press ENTER 4 Press selection keys to select a title you want to modify then press ENTER 5 Press selection keys to select INDEX ORIGINAL wor Taos PLAY LIST SELECT WITH 4 THEN PRESS ENTER PRESS EDIT TOEXIT EDIT ENTER em e rio EXT ORIGINAL 14 PLAYLIST 0 6 Press gt to start playback Press lt lt or to search for the picture from the title then press e The pictures of the title appear on the left window 7 Confirm the arrow is on REPLACE then press ENTER to register new index New index appears on the right window e When you press ENTER with the arrow 2 EDITING gt MODIFY INDEX 25 12 03 THU 10 00 10 15 PR3 FROG WORLD OTHERS sp INDEX PROG 1 0 01 03 gt SELECT IMAGE TO REPLACE WITH wur MD onum x ON REMOTE on RETURN you c
71. LP EP FR60 FR360 FR420 FR480 Back to the beginning The value is selectable from 1 to 6 hours in 5 minutes interval by pressing lt gt repeatedly after selecting FR60 FR360 To change the value in 30 minutes interval press and hold 40 e For details on the recording mode see the right column 5 Press on the unit to start recording Or while holding press gt on the remote control e The DVD recording lamp lights up on the unit 6 Press and II on the remote control simultaneously to pause recording e To resume recording press and gt simultaneously BASIC OPERATIONS ON DVD DECK ey 37 7 Press twice to stop recording e t takes about 10 seconds to end the writing session when you stop recording NOTES e t is recommended to format a DVD RAM disc before use if you use the disc on this unit for the first time e When using a brand new DVD RW disc format the disc either in VR mode or in Video mode rs pg 79 e Recordings made on DVD R RW disc must be finalised to play back on other DVD players Perform Finalise A Disc DVD Deck Only gt pg 80 e You can record to 99 programmes and 99 play lists on each disc e Some programmes can only be recorded one time e When recording is started an index of the first part of recording is automatically recorded pg 52 To record satellite programmes refer to page 51 To delete the index refer to page 55 e Recording sometime
72. NTER SELECT WITH 4 L3 DVD gt HDD DVD gt DV PRESS DUBBING TO EXIT A ENTER PA S 9 EXIT lt SELECT THEN PRESS ENTER 4 Press selection keys to select HIGH SPEED then press DUBBING gt HDD gt DVD ENTER our SELECT WITH 4 E 5 Press selection keys THEN PRESS ENTER to select indexes PRESS DUBBING HDD TO DVD DUBBING CAN BE COMPLETED small pictures of TOEXIT AT THE SAME RECORDING MODE QUICKLY desired original DUBBING ENTER recordings and or play CAU lists then press MARK After selecting all indexes you want to dub press ENTER e You can select up to 8 original recordings and or play lists e The recordable time of the disc is displayed on the bar meter For details refer to About Disc Remaining Display rs pg 61 Press selection keys to select EXECUTE or AUTO PWR OFF then press ENTER to start dubbing e If AUTO PWR OFF is selected the unit will turned off after dubbing is completed NOTES e Play lists are dubbed as programmes e In Video mode if the selected play list includes the scenes recorded in the different transfer rate the dubbing is performed in the highest transfer rate of the scenes in the selected play list e During dubbing it is not possible to play back on HDD or DVD or to set timer programming Just Dubbing From HDD To DVD By using Just Dubbing function when dubbing all selected original reco
73. Parental Lock For The First Time to access the PARENTAL LOCK screen before continuing To change the level 2 Press selection keys to select PARENTAL LEVEL then press ENTER 3 Press selection keys to select the desired level then press ENTER To change the country code 4 Press selection keys to select COUNTRY CODE then press ENTER 5 Press selection keys to select your country code then press ENTER e See Country Area Code List for Parental Lock pg 87 Press the number keys to enter the same password as in step 6 of To Set Parental Lock For The First Time then press ENTER 7 Press SET UP to complete the setting NOTE If you forget your password enter 8888 in step 6 To Temporarily Release Parental Lock When you set the Parental Lock level strictly some discs may not be played back at all When you insert such a disc and try to play it back the confirmation screen appears on the TV screen asking you whether you want Parental Lock to be temporarily released or not 1 Load a disc e If the disc is rated higher than the selected level the confirmation screen appears 2 Press selection keys to select YES then press ENTER e f you select NO you cannot play back that disc 3 Press the number keys to enter the same password as in step 6 of To Set Parental Lock For The First Time then press ENTER e When you enter the correct password the Parental Lock is released and
74. R NOTES e When appears on the TV screen no audio language is recorded e When the audio language won t be changed with the procedure above change the audio on a disc menu displayed by pressing MENU e Pressing AUDIO to select the audio language sound is only possible during playback It is not possible to select by pressing AUDIO in stop mode However you can select the desired audio language sound from the setup menu while in stop mode For example DVD VIDEO 04123 b ENGLISH When 3 audio languages are contained Playback Control PBC Function DVD DVD Audio RAM VIDEO CD Some Video CD SVCD discs support the PBC function PBC is an abbreviation of Play Back Control A Video CD SVCD disc recorded with PBC has its own menus such as a list of the songs on the disc You can locate a specific scene by using the menu 1 Press in stop mode The menu appears 2 Press the number keys to enter the number of the desired scene The unit starts playback of the selected item e appears on the front display panel e When NEXT or PREVIOUS appears on the TV screen Pressing NEXT amp advances to the next page Pressing PREVIOUS i lt returns to the previous page e You can return to the menu by pressing RETURN e The method of the operation is different depending on the disc NOTES e If you want to playback a PBC compatible Video CD SVCD disc without activating the PBC
75. ROL connector on the rear panel Setting Satellite Receivers Brand And Channel After installation set the satellite receiver s brand and channel correctly otherwise the Satellite Controller cannot work correctly Satellite receiver DECODER VCR HHBBBEEBRH BHHBHBHBEH e on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD Satellite Controller supplied 1 Turn on the satellite receiver s power 2 Press SET UP to access the Main Menu screen 3 Press selection keys to select INITIAL SET UP then press 21 pin SCART cable supplied V 4 du D IDEO SET UP HDD DVD SETUP FUNCTION SET INITIAL SET UP p To SAT CONTROL SE anda press TUNER SET Jl CLOCK SET To L 2 IN A AUTO CH SET MANUAL CH SET DECODER ge ec ad 4 CONTROL SET then SAT CONTROL SET GUIDE PROG SET press ENTER _ Lus 6 Press selection keys SETUP CX SELECT WITH 4 THEN PRESS ENTER to select BRAND Det e Su PPSS ISET UPI BAT Back of unit then press ENTER CABLE SAT 7 Press selection keys to select the brand code from the list on DVD page 25 then press ENTER e If the unit is in playback or recording mode you cannot set the bran
76. RT RGB COMPONENT SCART VIDEO If a connected appliance s input is compatible only with regular video signals set to SCART VIDEO SCART S VIDEO If a connected appliance s input is compatible with Y C signals set to SCART S VIDEO You can obtain high quality picture For connection be sure to use a 21 pin SCART cable that is compatible with the Y C signal SCART RGB connected appliance s input is compatible with RGB signals set to SCART RGB You can obtain a high quality RGB picture COMPONENT If a connected appliance s input is compatible with signals set to You can obtain a high quality picture Switch the TV to the input that you can watch component video pictures L 1 INPUT VIDEO S VIDEO VIDEO If a connected appliance s output is compatible only with regular video signals set to VIDEO S VIDEO If a connected appliance s output is compatible with Y C signals set to S VIDEO You can obtain a high quality picture For connection be sure to use a 21 pin SCART cable that is compatible with the Y C signal NOTES e If L 1 OUTPUT is to SCART S VIDEO or SCART it is not possible to set L 1 INPUT to S VIDEO e If L 2 SELECT is set to SAT S VIDEO or DECODER it is not possible to set L 1 INPUT to S VIDEO If L 2 SELECT is set to DECODER it is o
77. RTANT e To check if the Guide Programme numbers have been set correctly perform the VIDEO Plus Timer Programming pg 47 e In certain reception conditions station names may not be stored correctly and auto Guide Programme Number Set may not work properly If the Guide Programme numbers are not set properly when you timer record TV programme using the VIDEO Plus System the unit will record a TV programme of a different station When programming the timer using the VIDEO Plus system be sure to check the desired channel is selected correctly pg 47 e Your unit memorizes all detected stations even if reception of some of them is poor You can delete those stations with an unacceptable picture gt pg 76 Delete A Channel INITIAL SETTINGS en 21 INFORMATION Just Clock Your unit is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals by reading data from a PDC signal If you want to take advantage of this function simply set it to ON rs pg 78 If you have any difficulty with the above procedures call the JVC Customer Service Hot Line on 0870 330 5000 T V Link Functions When you connect the unit to your TV via a fully wired 21 pin SCART cable pg 18 the following functions are available You can use these functions only with a TV offering T V Link etc For details
78. ack t pg 35 11 Select this for Random Playback t pg 35 Be sure to clear Library Database Navigation screen by pressing NAVIGATION amm CABLE SAT am see DVD Olo OOOO ENTER Clay NAVIGATION gt Selection Keys c tJ Je idis 2 ON SCREEN OO O How Access The On screen Bar 1 Press ON SCREEN twice whenever a disc is loaded Contents of the on screen bar during playback DVD VIDEO EACH 0 00 3D ON CINEMA AUTO TITLE 99 99 Video CD SVCD TRACK 99 EACH 0 00 CINEMA P _ Om mel T fa 4 5 10 9 JPEG disc GROUP 99 TRACK 99 5 SEC JPEG lila 12 Select this to control the switching interval of the slide show t pg 35 Although examples of the on screen bar are provided here only for 3 types of discs the on screen bar will be displayed for whichever disc indicated in the left column Basic Operation On The On screen Bar Example When selecting Picture Control function of DVD During playback or while stopped 1 Press ON SCREEN twice to access the on screen bar The item currently selected is highlighted and pointed by W EACH 0 00 DVD 3D ON CINEMA AUTO ey o
79. aica BM Bermuda FJ Fiji JO Jordan BN Brunei Darussalam FK Falkland Islands Malvinas JP Japan BO Bolivia FM Micronesia KE Kenya Federated States of BR Brazil FO Faroe Islands KG Kyrgyzstan BS Bahamas FR France KH Cambodia BT Bhutan FX France Metropolitan KI Kiribati BV Bouvet Island GA Gabon KM Comoros BW Botswana GB United Kingdom KN Saint Kitts and Nevis BY Belarus GD Grenada KP Korea Democratic People s Republic of BZ Belize GE Georgia KR Korea Republic of CA Canada GF French Guiana KW Kuwait Cocos Keeling Islands GH Ghana KY Cayman Islands CF Central African Republic GI Gibraltar KZ Kazakhstan Congo GL Greenland LA Lao People s Democratic Republic CH Switzerland GM Gambia LB Lebanon CI C te d Ivoire 88 APPENDIX LC Saint Lucia NU Niue SZ Swaziland LI Liechtenstein NZ New Zealand TC Turks and Caicos Islands LK Sri Lanka OM Oman TD Chad LR Liberia PA Panama TF French Southern Territories LS Lesotho PE Peru TG Togo LT Lithuania PF French Polynesia TH Thailand LU Luxembourg PG Papua New Guinea TJ Tajikistan LV Latvia PH Philippines TK Tokelau LY Libyan Arab Jamahiriya PK Pakistan Turkmenistan MA Morocco PL Poland TN Tunisia MC Monaco PM Saint Pierre and Miquelon TO Tonga MD Moldova Republic of PN Pitcairn TP East Timor MG Madagascar PR Puerto Rico TR Turke
80. an return to the previous screen 8 Press EDIT to return to the normal screen 54 ey NAVIGATION Modify Title Name Protect Title DVD RAM amp DVD RW VR mode only 1 Perform steps 1 4 of Modify Index t pg 53 before continuing 2 Press selection keys to select NAME then press ENTER 3 Press selection keys to select ALPHABET SYMBOL SYMBOL2 4 Press selection keys to select the desired letter or symbol then press ENTER Repeat this process to complete the name To correct a letter MAI press selection keys to select DELETE then press ENTER e You can enter the letters up to 64 5 Press selection keys to select SAVE then press ENTER Press EDIT to return to the normal screen AC EDITING gt MODIFY 0026 FISH WORLD 64 25 12 03 10 00 10 15 3 FROG WORLD HOBBY XP SELECT WITH 46 gt BB THEN PRESS ENTER J EDIT uil more Modify Category 1 Perform steps 1 4 of Modify Index rs pg 53 before continuing 2 Press selection keys to select CATEGORY then press ENTER 3 Press selection keys to select the desired 0026 FISH WORLD 5964 MIN category then press 25 12 03 THU 10 00 10 15 PR 3 ENTER FROG WORLD HOBBY seectwrh gt vovit MUSIC gg
81. ance with the manufacturer s instructions Switch off and withdraw the mains plug when making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with glass panels or doors on equipment DON T DON T DON T DON T DON T DON T DON T DON T continue to operate the equipment if you are in any doubt about it working normally or if it is damaged in any way switch off withdraw the mains plug and consult your dealer remove any fixed cover as this may expose dangerous voltages leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode Switch off using the switch on the equipment and make sure that your family knows how to do this Special arrangements may need to be made for infirm or handicapped people use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety It is illegal to watch television whilst driving listen to headphones at high volume as such use can permanently damage your hearing obstruct the ventilation of the equipment for example with curtains or soft furnishings Overheating will cause damage and shorten the life of the equipment use makeshift stands and NEVER fix legs with wood screws to ensure complete safety always fit the manufacturers approved stand or legs with the fixi
82. apable of controlling four JVC video units independently Each of the units can respond to one of the four codes 1 2 3 or 4 The remote control is preset to send code 3 signals because your unit is initially set to respond to code 3 signals You can easily modify your unit to respond to code 1 2 or 4 signals e Slide the TV CABLE SAT DVD switch to DVD 0 00 Fa 02 H R CABLE SAT qt TV DVD Olo C OC OI 00 1 0 ENTER A v 80 0 2 u e Keep pressing SET UP down during step 1 1 Press the number key 1 for 1 2 for 2 3 for or 4 for 4 to change the remote control code then press ENTER 2 Press on the unit to turn off the unit 3 Press gt on the unit for over 5 seconds while the unit is turned off The code currently set appears on the front display panel 4 Press the remote control to change the unit s code The code currently set on the remote control blinks on the front display panel for approximately 5 seconds and is applied to the unit NOTE When POWER SAVE is set to ON pg 73 it is not possible to change the remote code Tv DVD TV AV VIDEO on co CABLE SAT
83. as follows Blue wire to terminal coded N Neutral or coloured Black Brown wire to terminal coded L Live or coloured Red If in doubt consult a competent electrician HOW TO USE THIS INSTRUCTION MANUAL e All major sections and subsections are listed in the Table Of Contents on page 5 Use this when searching for information on a specific procedure or feature e The Index on pages 11 14 illustrates the controls and connections on the front and rear panel the front display panel and the remote control e The list of terms on page 91 lists frequently used terms and the number of the page on which they are used or explained in the manual e The c mark signals a reference to another page for instructions or related information e Operation buttons necessary for the various procedures are clearly indicated through the use of illustrations at the beginning of each major section 4 EN SAFETY FIRST Some Do s And Don ts On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but like any electrical equipment care must be taken if you are to obtain the best results and safety is to be assured DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections including the mains plug extension leads and interconnections between pieces of equipment are properly made and in accord
84. at of the original Eit To Or From Another Recorder EDITING EN 65 e Slide the TV CABLE SAT DVD switch to DVD You can use your unit as the source player or as the recording deck 1 Connect another recorder s 21 pin SCART connector to the unit s 21 pin SCART connector as illustrated 1 When using your unit as the source player NOTES e When using another recorder as the recording deck refer to its instruction manual e t is not possible to dub copy protected contents An error message will appear on the TV screen connect its L 1 IN OUT connector to the recording deck 2 When using your unit as the recording deck When using your unit as the source player TV receiver Player Your unit 21 pin SCART cable not supplied Another recorder 1 When using your unit as the recording deck TV receiver Recorder Your unit 21 pin SCART cable supplied 21 pin SCART cable not supplied Another recorder ET Player connect its L 2 IN DECODER connector to the source player e If another recorder is compatible with the Y C signal when using your unit as the source player set L 1 OUTPUT to SCART S VIDEO ts pg 66 when us
85. base Navigation automatically So you can confirm the information of the titles recorded with the Library Database Navigation screen And you can also select one of the titles recorded using the Library Database Navigation The following screen appears as the Library Database Navigation Screen when you press NAVIGATION You can move the arrow to select the desired position on the screen by pressing the selection keys on the remote control NAVIGATION gt ORIGINAL 0026 FISH WORLD 143 MIN 1 25 12 03 THU 10 00 10 15 PR 3 FROG WORLD HOBBY EP 5 5 7 Indicates currently received TV programme 2 Guidance for operations 3 Scroll bar Appears when there are over nine registered titles or play lists The scroll bar only indicates that there are more titles or play lists hidden off the current screen display To show hidden titles or play lists press selection keys repeatedly 4 Recording information for the title indicated by the arrow 5 Index list Thumbnail still of each title Thumbnail still is not to be played back 6 Index amp Indicates no index is registered D Indicates title in standby for timer recording Indicates no title is registered 7 Icons Indicate the record condition of each title SELECT WITH THEN PRESS ENTER PRESS NAVIGATION 2 EXIT JNAVIGATION ENTER EXT 1 Playback screen
86. commended FILM Suitable for playing back a progressive scanned film source disc VIDEO Suitable for playing back a video source disc The outlines on the played back pictures will be soft To clear the on screen bar Press ON SCREEN NOTE When the progressive mode is set be sure to set L 1 OUTPUT to COMPONENT pg 66 Progressive scan is output only from COMPONENT VIDEO OUT connectors Programme Playback BASIC OPERATIONS ON DVD DECK ey 35 Random Playback DVD DUM DVD Audio RAM RW VRI VIDEO cD You can programme up to 30 tracks Video CD SVCD or Audio CD to play back in the desired BE While stopped 1 Press ON SCREEN twice to access the on screen bar 2 Press selection keys to select then press ENTER The programme table appears under on screen bar TRACK 99 EACH 0 00 m 3 Press the number keys to enter the track numbers in the desired order Examples 1 To select track 5 press the number key 5 and ENTER 2 To select track 15 press the number key 1 and 5 3 To select track 25 press the number key 2 and 5 If you have specified a wrong selection Press CANCEL X The last selection is erased Or press CLEAR IBI The whole selection is erased 4 Press Playback starts in the programmed order e When all of the programmed tracks have been played back Programme Playback stops but the programmed information remains e To add tracks to th
87. conds e Video output indicator lights on the front display panel if Progressive scan mode has been established t pg 13 e Each press of PROGRESSIVE SCAN for 3 or more seconds switches the scan mode NOTES e When the progressive mode is set be sure to set L 1 OUTPUT to COMPONENT t pg 66 Progressive scan is output only from COMPONENT VIDEO OUT connector e Interlaced scan mode is the setting at your purchase e Interlaced scan mode might be suitable depending on video material e Scan mode cannot be set while menu screen is displayed e When the Progressive scan mode is engaged no video signal is output from L 1 IN OUT connector 74 SUBSIDIARY SETTINGS VIDEO Plus System Setup IMPORTANT Normally Auto Set Up pg 19 Preset Download pg 20 or Auto Channel Set pg 75 sets the Guide Programme numbers automatically You need to set the Guide Programme numbers manually only in the following cases e When timer programming with the VIDEO Plus system the channel position where the station you wish to record is received on your unit is not selected OR when you add a channel after Auto Set Up Preset Download or Auto Channel Set has taken place Set the Guide Programme number for that station manually e When you wish to timer record a satellite programme with the VIDEO Plus system Set the Guide Programme numbers for all satellite broadcasts received on y
88. cording press DISPLAY repeatedly until the desired indication appears on the front display panel e Each time you press DISPLAY the time indication changes as follows Elapsed recording time Disc remaining time Clock Back to the beginning Rate Function BASIC OPERATIONS ON DVD DECK ey 39 Receiving Stereo And Bilingual Programmes To record the entire programme the unit automatically sets the appropriate recording mode depending on the combination of the total time of the programme to be recorded and either the remaining disc space or the specified recording time from 60 minutes to 480 minutes record the entire programme within the actual remaining disc space DVD deck only Select FR JUST in a recording mode selection procedure e Note that this function is available only for timer programming recording pg 47 49 and dubbing from HDD to DVD t pg 60 W To record the entire programme by specifying the desired recording time Select FR60 FR360 FR420 or FR480 in a recording mode selection procedure t pg 37 40 47 49 W To record a 25 min long daily programme five times just on the same DVD disc for example Perform VIDEO Plus Timer Programming gt pg 47 procedure Be sure to set the recording mode to FR125 and set Weekly Daily Rec Function to MON FRI in step 8 to fit the total recording time to the whole disc space A 1st B 2nd C
89. ct OUT then press ENTER e Select PREVIEW then press ENTER to preview the edited title 8 Press selection keys to select OK then press ENTER e If you do not want to delete the scene press RETURN To modify the points Press RETURN Repeat steps 4 8 as necessary 9 Press selection keys to select DELETE then press ENTER The selected scene is deleted e To cancel the deletion press selection keys to select CANCEL then press ENTER 10 Press EDIT to return to the normal screen NOTES e There may be a discrepancy of several seconds between the scene you intend to edit and the scene which is actually edited e Available recording capacity may not match the deleted part after deletion of EDITING gt ORIGINAL DEL SCENE OUT 0 06 15 NAVIGATION 55 Divide Title HDD deck only Press EDIT The Editing screen appears sse 2 Press selection keys ow to select DIVIDE Esa PLAY LIST then press ENTER PRESS EDIT TO EXIT 3 Press selection keys to select a title to divide then press ENTER 4 Press gt to start playback Press lt lt or to locate a point to divide then press II 5 Contirm the arrow is on DIVIDE then press ENTER e The first picture start of the newly created title appears in the bottom right window e Select PREVIEW then press ENTER The first several seconds of the newly created tit
90. cted e All necessary power switches have not been turned on Confirm that all units power switches are turned on e The setting of the input channel position is inappropriate Select the input channel position F 1 L 1 or L 2 that corresponds to the input terminal connected to the external equipment r amp pg 65 The on screen display superimposed on the programme played back received on this unit is recorded when you dub the programme to an external recording equipment Set SUPERIMPOSE to OFF pg 73 The unit does not operate e There are cases when the operation is prohibited on the disc e Lightning or static electricity may cause malfunction of the unit Press to turn the power off then press the button again to turn the power on The remote control of a JVC TV will not operate the unit e The setting of the remote control code is inappropriate To operate the unit using a JVC TV remote control set the remote control code of the unit to 1 Default 3 pg 68 Playback DVD Deck The DVD deck cannot be operated e The DVD deck is not selected Press DVD so that the DVD lamp lights up on the unit Images do not appear on the TV screen e The TV receiver s channel selector is not set to the AV mode Set the TV to its AV mode e When interlace scanned programme is played back progressive scan mode is selected Press
91. cted with a digital audio device using an optional optical cable and DIGITAL AUDIO OUT is set to DOLBY DIGITAL PCM it is not possible to switch the audio channel of a bilingual programme recorded on a DVD RAM or DVD RW VR mode disc pg 70 In this case perform the following steps using the remote control to switch DIGITAL AUDIO OUT from DOLBY DIGITAL PCM to ONLY 1 Press SET UP to access the Main Menu screen 2 Press selection keys to select DVD VIDEO SET UP then press V 3 Press selection keys to select AUDIO OUTPUT then press V 4 Press selection keys to select DIGITAL AUDIO OUT then press ENTER 5 Press selection keys to select PCM ONLY then press ENTER pg 71 6 Press SET UP to complete the setting 7 Press AUDIO to select the desired audio channel E Ed E E EZ Some DVD VIDEO discs contain the multiple audio language or sound You can select the desired audio language or sound For some Video CD SVCD discs you can switch the audio channel to choose Karaoke either with or without the vocal 1 Press AUDIO during playback The Audio Language Sound selection display appears 2 Press AUDIO or selection keys to select your desired audio language sound e Each time you press AUDIO or the selection keys the audio language sound changes e To clear the Audio Language Sound selection display press ENTE
92. ction keys to select the desired option then press ENTER 6 Press SET UP to complete the setting UE EU FUNCTION SET UP REC PLAY SET UP DISPLAY SET VIDEO IN OUT SETUP SELECT WITH 4 THEN PRESS ENTER e ZS PRESS SET UP TO EXIT The boldface settings below indicate the settings at your purchase MONITOR TYPE 4 3LB 4 3PS 16 9AUTO 16 9FIX 4 3LB Letter Box conversion Select this when the aspect ratio of your TV is 4 3 conventional TV While viewing a wide screen picture the black bars appear on the top and the bottom of the screen 4 3PS Pan amp Scan Select this when the aspect ratio of your TV is 4 3 conventional TV While viewing a wide screen picture the black bars do not appear however the left and right edges of the pictures will not be shown on the screen 16 9AUTO Wide television conversion Select this when the aspect ratio of your TV is 16 9 wide TV 16 9FIX Wide television conversion Select this when the aspect ratio of your TV is fixed to 16 9 wide TV The unit automatically adjusts the screen width of the output signal correctly when playing back a picture whose aspect ratio is 4 3 Pan amp Scan Letter Box In general DVD VIDEO disc are produced for a wide screen TV with 16 9 aspect ratio Material with this ratio will not fit to a TV with 4 3 aspect ratio There are two styles to display the image Pan a
93. d code 8 Press selection keys to select PROGRAMME then press ENTER 9 Press selection keys to select one of the channel positions on the satellite receiver then press ENTER e You can select the channel position between 1 to 999 1O Press selection keys ENTER to select TEST then edis INITIAL SET UP gt SAT CONTROL SET Selection Keys BRAND 73 unit enters the Test mode TEST Li SETUP ENTER SELECT WITH THEN PRESS ENTER PRED PRESS SET UP TO EXIT ext SET UP 11 Check the result of the test If the satellite receiver s channel number has been changed to the same one as you set in step 9 Press selection keys to select YES then press ENTER to finish the Sat Control Set mode If the satellite receiver s channel number has not been changed correctly Press selection keys to select NO then press ENTER Then perform the procedure again from step 6 BRAND NAME CODE JVC 73 AMSTRAD 60 61 62 63 92 ASTON 97 CANAL SATELLITE 81 CANAL 81 D BOX 85 ECHOSTAR VIA DIGITAL 82 FINLUX 68 FORCE 89 GALAXIS 88 GRUNDIG 64 65 102 HIRSCHMANN 64 78 99 HUMAX 88 ITT NOKIA 68 JERROLD 75 KATHREIN 70 71 96 LUXOR 68 MASCOM 93 MASPRO 70 NOKIA 87 94 PACE 65 67 74 86 92 97 PANASONIC 74 92 PHILIPS 66 84 101 RADIX 78 RFT 69 SABA
94. d into 6 regions for DVD VIDEO discs DVD VIDEO discs are assigned a region number to indicate which region they may be played back in A disc cannot be played back on this unit unless the region number of the disc matches that of the unit The region number for this unit is 2 Only discs whose region number includes 2 or ALL can be played back such as shown below Examples of DVD VIDEO labels which can be played back using this unit 2 s E 2 Marks of discs in this instruction manual m Allows operation with DVD RAM disc Allows operation with DVD R disc Allows operation with DVD RW disc DVD Allows operation with DVD VIDEO disc Allows operation with a E Video CD Super Video CD SVCD disc Allows operation with an Audio CD disc Allows operation with a disc including MP3 files Allows operation with a n disc including JPEG files 8 EN DISC INFORMATION Recording Medium And Format DVD RAM e Recording and erasing can be performed as many times as possible on a disc e Editing can be performed after recording such as deleting unwanted parts e While recording it is possible not only to start playback of a programme currently being recorded but also to watch another programme previously recorded DVD RW VR mode e Recording and erasing can be performed as many times as possible on a disc e Editing can be performed after recording
95. d on CD R RW or CD ROM discs very easily e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DVD to select the DVD deck 1 2 3 TRACK 001 100 0 07 01 2 1 GROUP 001 100 IT S SHOWTIME B z TUE INOI ud SEXY GUY GOMAKI DOOR TO TOMORROW I WISH REASON ASAMI DIE ANOTHER DAY JAMES BOND 4 5 6 Selected group number total number of groups on the disc Selected file number total number of files in the group that contains the selected file Elapsed time MP3 only Name of the selected file Group name Selected file m 5 e f there are more than 100 files the rest of the files are not displayed In this case press ON SCREEN to display them on the TV screen e both files and WMA files are recorded on the same disc WMA files cannot be played back as they are not displayed on the navigation screen NAVIGATION 59 Locating The Desired Group And Tracks 1 Load a disc 2 Press NAVIGATION 3 Press selection keys to select ORIGINAL then press ENTER 4 Press selection keys to select the desired group then press 2 NAVIGATION gt ORIGINAL GROUP 001 100 TRACK 001 100 0 07 01 ENTER IT S SHOWTIME B z list of
96. de When using Live Memory playback HDD FR360 11 11 33 6 7 8 DVD 1 3 ue 11 35 FR360 1138 1 Time scale for recording HDD deck Bar meter for recording DVD deck Current recording point Recording mode Current time Current playback channel position number Time scale for Live Memory Playback HDD deck Bar meter for Live Memory Playback DVD deck Current playback point Live Memory playback mode 9 Current playback time e n On Screen Display DV Dubbing When capturing images from the external DV equipment 1 2 gt je gt 15 16 17 12 Recording speed HDD capacity graph HDD time counter Recording time scale HDD mode Remote control mode Connected DV equipment mode Connected DV equipment model information Input channel Sound mode Sound input bit rate Indicates the sound bit rate of the connected DV equipment Connected DV equipment information Maker name and model name etc may not appear depending on the connected equipment Tim
97. de e Slide the TV CABLE SAT DVD switch to DVD e Load a DVD R RW disc to finalise CABLE SAT TV DVD OOO ENTER Selection Keys AVID Before finalising e t is possible to record on a blank space e It is possible to enter title names pg 54 e It is possible to delete titles pg 54 e t is impossible to overwrite recorded areas of DVD R discs e Available recording capacity does not increase even if a recorded title is deleted from a DVD R disc e It is impossible to record or edit DVD R RW discs recorded other devices even if they have not been finalised After finalising For DVD R RW Video mode discs e Video and audio that have been recorded by then are recorded in conformity to the DVD Video standard enabling you to play back the discs as DVD VIDEO discs e Although DVD R RW discs finalised on this unit become playable on DVD players compatible with DVD R RW discs some discs still may not play for which JVC cannot take responsibility e Marked points marked before finalising will be deleted and titles will be divided automatically into chapters approximately every 5 minutes pg 29 e Depending on the DVD players and DVD R RW discs used and on the conditions of recording it may not be possible to play back the discs In this case play back the discs on this u
98. disc was formatted is restored making the disc recordable pg 8 79 Function SUBSIDIARY SETTINGS 81 Lock DVD Deck Only Use this function if you encounter problems while operating this unit You can lock the disc tray to prohibit the unwanted disc ejection by children e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT ae 0 eoo OO GO OG 0 D 0 Selection Keys cJ RETURN A a0 p ry a I Y onl of 1 Press to access the help screen An INDEX screen that contains the most common needed topics headings relating to the current status appears Topics with the icon refer to HDD deck operations and with the icon refer to those for the DVD deck 2 Press A V to search for the item that describes the solution to your problem then press ENTER e The selected help page appears e You can also browse help pages by pressing selection keys e To return to a previous page press RETURN 3 Press to return to the normal screen NOTE You cannot perform playback recording timer recording or other normal operations while accessing the help screen e Turn off the unit
99. e NICAM bilingual programme B DIRECT REC OFF ON When this function is set to ON you can easily start recording the programme that you are watching on your TV While holding press gt on the remote control or press on the unit NOTES e When you use the Direct Rec function be sure to use a TV offering T V LINK etc and connect a fully wired 21 pin SCART cable between the unit and the TV rs pg 18 e f DIRECT is set to OFF the button functions as described in Basic Recording gt pg 37 40 e During Direct Rec appears on the front display panel e programme is recorded with the Direct Rec the station name will not be registered in the library will be displayed for the station name e Even if there is no power supply for more than 60 minutes the unit keeps the setting JUMP TIME 15 MIN 30 MIN 1 HR You can locate a scene ahead of or behind the currently viewed one by jumping a selected time interval during playback or Live Memory Playback For details refer to Jump Search rs pg 28 43 DISPLAY SET SUPERIMPOSE OFF AUTO When this function is set to AUTO various operational indicators appear on the TV screen OFF To turn off superimposed indications AUTO To superimpose operational indications for approximately five seconds just after the corresponding operation NOTES e Even when SUPERIMPOSE is set to
100. e Video CD SVCD disc is loaded deactivate the PBC function t pg 30 Angle Selection DVD DVD VCD B uus Ked E You can enjoy a variety of scene angles if a DVD VIDEO disc contains multi angle parts where the same scene was shot from different angles If the disc contains multi angle parts 29 appears on the TV screen at the beginning of the multi angle part 1 Press ANGLE during playback The angle selection display appears on the TV Screen 2 Press ANGLE or selection keys to select your desired angle e Each time you press ANGLE or the selection keys the angle changes e When O appears on the TV screen the current scene is not recorded from multiple angles In addition some discs prohibit angle selection e To clear the angle selection display press ENTER In addition the angle selection display disappears automatically if no operation is done for 10 seconds 4123 When 3 scene angles contained 30 BASIC OPERATIONS DVD DECK Subtitle Selection Audio Language Sound Selection DVD DVD RUD RAM VIDEO SVCD CD Some DVD VIDEO discs contain more than one subtitle language from among which you can choose the desired subtitle language appears on the TV screen at the beginning of the part where more than one subtitle language are recorded 1 Press SUBTITLE during playback The subtitle selection display appears on the TV sc
101. e counter for the connected DV equipment Sound monitor mode qa m e i 0 0 Remote control switch Auto capture button Sound monitor switch Elapsed recording time INDEX cu 17 18 INSTALLING YOUR NEW UNIT Basic Connections OP TV aerial cable Mains outlet To ANTENNA IN Mains power cord Back of unit To AUDIO Ej To S VIDEO OUT OUT To UU To COMPONENT ou VIDEO OUT Audio cable not supplied S Video i ble RF cable 21 pin SCART cal supplied cable not supplied supplied Component video cable not supplied I gt TV 75 ohm terminal It s essential that your unit be properly connected ATTENTION e Your TV must have a 21 pin AV input connector SCART for the basic connection to the unit e Connect the AC plug only after all connections to the TV has been completed THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED 1 the unit on a stable horizontal surface 2 Connect the unit to a TV depending on the TV and cables you use W Basic Connection To connect to a TV with 21 pin SCART input connector 1 Disconnect the TV aerial cable from the TV 2 Connect the TV
102. e disc a play list includes information such as the timer counter for the playback start point and end point indexes for checking the contents of recorded data category information and more Playback according to a play list you have created allows you to enjoy various combinations of video images from a single title Create Play List 1 Press EDIT The Editing screen appears 2 DVD deck only Press selection keys to select MODIFY under ORIGINAL PLAY LIST then press ENTER 3 Press selection keys to select CREATE then press ENTER 4 Press selection keys to select a title that includes scenes to be included in a play list then press ENTER 5 Press to start playback Press lt lt or gt to find the point where you want the created play list to begin then press Contirm the arrow is on IN OUT then press ENTER un e The edit in time is displayed on the screen e To undo press selection keys to select RETRY then press ENTER 7 Press gt to start playback Press lt lt or gt to find the point where you want the created play list to end then press 8 Confirm the arrow is on IN OUT then press ENTER e The edit out time is displayed on the screen e The edit out point must come after the edit in point e Select PREVIEW then press ENTER to preview the play list 9 Press selection keys to select OK then press ENTER 1O Press selection keys to
103. e end of the programme perform steps 1 through 3 e During Programme Playback pressing gt skips to the next selection of the programme Pressing I lt returns to the beginning of the current selection To clear the on screen bar and the contents of the programme Press ON SCREEN To cancel Programme Playback Press selection keys to select PRGM then press ENTER NOTE Programme Playback is not possible depending on the type of disc USE 0 9 KEYS TO SELECT TRACK 1 2 3 4 5 6 7 8 al _ E EE Ah v spe recepte SE mises t 21 22 23 24 25 26 27 28 29 30 Program Total Time 0 00 DVD DVD Audio RAM VIDEO cD You can play back all the tracks on the disc in random order While stopped 1 Press ON SCREEN twice to access the on screen bar 2 Press selection keys to select RND then press ENTER Playback starts in random order TRACK 99 EACH 0 00 m To clear the on screen bar Press ON SCREEN To cancel Random Playback Perform steps 1 and 2 NOTE The same track will not be played back more than once during Random Playback Select The Switching Interval Of The Slide Show DVD DVD Audio RAM VIDEOR SVCD CD You can control the switching interval of the slide show 1 Press ON SCREEN twice to access the on screen bar 2 Press selection keys to select Bi then press ENTER The pop up window appears under the selected item GROUP 99 TRACK 99 5 SEC SX
104. each TV programme has a corresponding code number which your unit is able to recognise You can use the remote control to enter the PlusCode number e Make sure that the unit s built in clock is set properly e Turn on the unit e Turn on the TV and select the AV mode Slide the TV CABLE SAT DVD switch to DVD CABLE SAT Ivo PROGRAMME ENTER Selection Keys C gt RETURN DISPLAY 2 QS VPS PDCO CL d 1 Load a recordable disc if recording to DVD 2 Press PROGRAMME to access the programme top screen 3 Press selection keys to select VIDEO PLUS then press ENTER e When PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMMES appears on the TV screen you need to cancel some of the reserved programmes rs pg 50 4 Press the number keys to enter the PlusCode number of a programme you wish to record OR SELECT WITH 4 THEN PRESS ENTER 3 PROGRAMME gt SHOWVIEW 1 2 PLUSCODE Press selection keys to A PROGRAMME select the desired number key on the screen then press ENTER Repeatto enter all required numbers e f you have made a mistake press selection keys to select DELETE or DELETE ALL then press ENTER and input the correct number before you press ENTER again 5 Press selection keys to select RECORD th
105. ead in XP mode e If the remaining capacity of the hard disc is not sufficient the programme is recorded to the DVD deck until the remaining capacity of the DVD disc lasts e If JUST is selected for the recording mode the current recording mode for the DVD deck is applied 50 en MER RECORDING Tio CABLE SAT PROGRAMME ENTER Selection Keys Check Programmes To check the whole list of programmes 1 Press PROGRAMME to access the PROGRAMME NAVIGATION programme top screen TIMER PROGRAMME s CALENDAR PR VIDEO PLUS 2 Press selection keys PEN pr to select THEN PRESS ENTER 6 PROGRAMME LIST PRESS PROGRAMME PROGRAMME CHECK then press ENTER e The details of a selected programme appear on the top of the screen e The daily programme of a title is listed as one programme To check the list of programmes by date 1 Press PROGRAMME to access the programme top screen 2 Press selection keys to select CALENDAR LIST then press ENTER 3 Press selection keys to select the desired date then press ENTER PROGRAMME LIST ENTER ZG me PROGRAMME lt EXT lt setect Cancel And Change Programmes e Repeat steps in Check Programmes to select a programme before proceeding To cancel the programme 1 Press selection keys to select CANCEL PROGRAMME gt PROGRAMME LIST then press ENTER S
106. egards to its Hi Fi audio capability It is recommended that you check the maximum level if you are going to listen to the Hi Fi audio signals through a stereo amplifier A sudden surge in the input level to the speakers may damage them e Some speakers and televisions are specially shielded to prevent television interference If both are of the non shielded type do not place the speakers adjacent to the TV set as this can adversely affect the playback picture When you can t switch the audio channel of a bilingual programme When the unit is connected with a digital audio device using an optional optical cable and DIGITAL AUDIO OUT is set to DOLBY DIGITAL PCM it is not possible to switch the audio channel of a bilingual programme recorded on a DVD RAM or DVD RW VR mode disc In this case perform the following steps using the remote control to switch DIGITAL AUDIO OUT from DOLBY DIGITAL PCM to 1 Press SET UP to access the Main Menu screen 2 Press selection keys to select DVD VIDEO SET UP then press V 3 Press selection keys to select AUDIO OUTPUT then press V 4 Press selection keys to select DIGITAL AUDIO OUT then press ENTER 5 Press selection keys to select PCM ONLY then press ENTER pg 71 6 Press SET UP to complete the setting 7 Press AUDIO to select the desired audio channel Mode Set e Turn on
107. election Keys SET UP L 1 Output And L 1 Input Setting The L 1 IN OUT connector accepts and delivers either a composite signal regular video signal or a Y C signal a signal in which the luminance and chrominance signals are separated Set L 1 OUTPUT and L 1 INPUT to the appropriate mode depending on the type of appliance connected to the unit s L 1 IN OUT connector 1 Press SET UP to access the Main Menu screen 2 Press selection keys to select FUNCTION SET UP then 3 4 press V Press selection keys to select VIDEO IN OUT then press V Press selection keys to select L 1 OUTPUT or L 1 INPUT then press ENTER Press selection keys to select the appropriate setting then press ENTER Press SET UP to complete the setting Samy FUNCTION SET UP REC PLAY SET UP DISPLAY SET VIDEO IN OUT ETUP ENTER me exit SELECT WITH 4 THEN PRESS ENTER PRESS SET UP TO EXIT FUNCTION SETUP MEINES REC PLAY SET UP DISPLAY SET VIDEO IN OUT MONITOR TYPE 4 3LB F 1 VIDEO su SETUP a ENTER mere EXT SELECT SELECT WITH 4 THEN PRESS ENTER PRESS SET UP TO EXIT The boldface settings below indicate the settings at your purchase L 1 OUTPUT SCART VIDEO SCART S VIDEO SCA
108. en press ENTER 5 Press selection keys to select RECORD PROGRAMME gt CALENDAR PR 2 3 then press 14 01 04 WED 22 30 23 00 MISC XP ENTER Press selection keys to select the desired PAGES gt __ recording deck then deri press ENTER 0 SAT LL omui ROME ENTER 6 Press selection keys to select START then press ENTER Press selection keys to set the desired start time then press ENTER e Each press of A V increases decreases the start time in 1 minute interval e To increase decrease the start time in 30 minutes interval press and hold A V 7 Press selection keys to select STOP then press ENTER Press selection keys to set the desired stop time then press ENTER e Each press of A V increases decreases the stop time in 1 minute interval e To increase decrease the stop time in 30 minutes interval press and hold A V CONFIRM p EXT TIMER RECORDING 49 8 Press selection keys to select TV PROG then press ENTER Press selection keys to select the desired channel 9 Press selection keys to select CONFIRM then press ENTER 10 Set the other recording options as required e Refer to step 8 in VIDEO Plus Timer Programming pg 47 11 Press selection keys to select then 2 PROGRAMME gt CALENDAR PR 3 3 0 access the Programme Confirmation screen PRESS PROGRAMM
109. en press ENTER Press selection keys to select the desired recording deck then press ENTER Press selection keys to select CONFIRM then press ENTER e If the number you entered is invalid PLUSCODE NO ERROR CONFIRM PLUSCODE NO THEN RETRY appears on the TV screen Input a valid PlusCode number e If GUIDE PROGRAMME IS NOT SET SET GUIDE PROGRAMME THEN RETRY appears on the TV screen set Guide Programme Numbers manually pg 74 RECORD TO ENTER TIMER RECORDING ey 47 7 The PlusCode number you entered and the matching timer recording information are displayed on the TV screen Check the programme data e To cancel this setting press RETURN IMPORTANT Make sure the channel position number you wish to record is displayed if not see VIDEO Plus System Setup pg 74 and set the Guide Programme number correctly 8 Press selection keys to select the desired recording option as required Press selection keys to select the desired setting then press ENTER e INPUT TITLE gt pg 54 Modify Title Name e CATEGORY rs pg 54 Modify Category e VPS PDC t pg 48 VPS PDC Recording e WEEKLY DAILY pg 48 Weekly Daily Recording e REC pg 37 Recording Mode 9 Press selection keys to select OK then press ENTER to access the Programme Confirmation screen 10 Press selection keys to selec
110. er Infrared Remote Control Unit You are now ready to install your unit pg 18 1 6 EN INDEX On Screen Display When SUPERIMPOSE is set to AUTO and ON SCREEN on the remote control is pressed various operational indicators appear on the TV screen To clear the operational indicators press ON SCREEN twice When playing back a recorded title HDD FISHING WORLD m Title start Current playback point Title end Elapsed playing time Play mode Name of title currently being played back Time scale This title is an hour and a half long Audio mode Playback title number Playback chapter number Disc remaining time Current status playback Audio mode Bar meter Name of title or play list currently being played back Current playback point gt gt e n9 Recorded mode When recording Recording point Current status recording Current time Recording channel number When pressing REC MODE Appears for eight seconds Remaining disc time for each recording speed Recording speed When pressing during recording 1 2 30 Recording time for Instant Timer Recording ITR mo
111. er recording or instant timer recording REGION CODE ERROR 01 e A disc loaded cannot be played back on this unit since the region number of the disc does not match that of the unit gt pg 7 UNREADABLE DISC 01 e When an incompatible disc is loaded gt has been pressed gt pg 7 COULD NOT FORMAT THE DISC CHECK THE DISC e Formatting is not complete since the disc may be dirty or damaged Take out the disc clean it and retry pg 10 79 CAN NOT FINALISE THIS DISC Finalising is not complete since the disc may be dirty or damaged Take out the disc clean it and retry t pg 10 80 CAN NOT CANCEL FINALISATION OF THIS DISC e Cancelling disc finalisation is not complete since the disc may be dirty or damaged Take out the disc clean it and retry pg 10 80 PRESS STOP AGAIN TO STOP RECORDING e During Live Memory playback has been pressed rs pg 44 TIMER RECORDING COMPLETED e Timer recording has finished during Live Memory playback PLAYBACK WILL STOP THEN TIMER RECORDING WILL START Timer recording finished during Live Memory playback then the next timer recording is about to begin while playback continues COPY PROHIBITED CAN NOT RECORD e An attempt has been made to record copy protected contents e An attempt has been made to record copy once contents on a disc that is not CPRM compatible such as DVD R COPY PROHIBITED C
112. ess ENTER e The unit is preset to receive clock setting and adjustment data from channel position 1 7 Press SET UP to start the clock operation NOTES e Just Clock when set to ON adjusts the unit s built in clock every hour except for 23 00 0 00 1 00 and 2 00 e Just Clock is not effective when the unit s power is on the unit is in the Timer mode a difference of more than 3 minutes exists between the built in clock s time and the actual time the unit is in the Automatic Satellite Programme Recording mode pg 51 HDD deck only the unit is in the Power Save mode t pg 73 L 2 SELECT is set to VIDEO or SAT S VIDEO pg 67 e If Just Clock is ON the unit s clock is automatically adjusted at the start end of Summer Time e Just Clock may not function properly depending on the reception condition Just Clock The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals by reading data from a PDC signal The Just Clock option can be set to ON or OFF at the Clock Set screen the default setting is OFF IMPORTANT If you turn off Just Clock the accuracy of your unit s built in clock may be reduced which could adversely effect timer recording We recommend you to keep Just Clock on In cases where the clock setting data from a PDC signal is incorrect however you are advised to keep Just Clock set
113. ess MARK e Crossed MARK appears on the TV screen and the marked position is deleted NOTES e When a monaural programme changes to a stereo programme while recording a mark signal is automatically recorded e For DVD R RW Video mode discs marks are assigned automatically every 5 minutes MARK MARK BASIC OPERATIONS ON DVD DECK ey 29 Checking The Time Information E3 Ed E1 n E3 a o ES You can check time information of a disc on the front display panel and the TV screen DVD RAM DVD R DVD RW Each press of DISPLAY changes the display as follows During recording Clock time front display panel only Current title elapsed time Disc remaining time back to the beginning only discs before finalising During playback Each title elapsed time Current title elapsed time Disc remaining time back to the beginning only discs before finalising During recording playback or in stop mode Press REC MODE e The disc remaining time according to recording modes appears on the TV screen e FR mode it is possible to set recording time in detail using selection keys rs pg 39 e It is not possible to switch the recording mode during playback or while recording W Video CD SVCD Audio CD During playback or in stop mode Current track elapsed time Current track remaining time Total elapsed time Total remaining time back to the beginning NOTE When a PBC compatibl
114. fication CD DA Before you play back a CD check for the CD logo and read the notes on the package to confirm that it conforms to the Compact Disc specification e Depending on the intentions of the author of the software recording conditions of DVD discs and Video CD SVCD discs may be restricted Since this unit plays back discs according to the intentions of the author of the software as indicated on the disc some functions may not operate as commanded e When switching from the first layer to the second layer of double layered DVD VIDEO discs the image and sound may be momentarily distorted This is not a malfunction e DVD AUDIO discs compatible with DVD video players can be played e Super Audio CDs SACD compatible with conventional CD players can be played The following types of discs cannot be played using this unit Do not attempt to play back any kind of disc that is damaged cracked warped or repaired with adhesive tape or discs in unusual shapes heart shaped octagonal or other forms If such discs are accidentally played back it may cause noise that can lead to speaker damage e CD ROM discs including PHOTO CD and CD G e Discs recorded in Packet Write UDF format e 1 3 GB double density CDs DDCD e High density CDs HDCD The following discs also cannot be played back e Discs of a region number other than 2 DVD RAM 2 6 GB 5 2 GB DVD RAM TYPE1 Region Number The world is divide
115. files in the ROOT _______ CLASSIC selected group us appears DANCE EUROPE 005 0008 TO TOMORROW I WISH FOREIGN GROUP FOREIGN ROCK 006 REASON ASAMI 007 DIE ANOTHER DAY JAMES BOND 5 Press selection keys to select the desired item then press GROUP 001 100 TRACK 001 100 0 07 01 83 ENTER The unit starts TESCA playback from the wor CLASSIC selected item e The unit stops when all DANCE items in the selected 82 006 REASOVASAM 007 DIE ANOTHER DAY JAMES BOND FOREIGN GROUP FOREIGN ROCK group are played back NOTES e If you press SELECT P instead of ENTER in step 4 the unit starts playback from the first file of the group e JPEG files are played back as a slide show at the set intervals pg 35 e file name includes any 2 byte character the unit may not show the file name correctly e The order of the groups and items shown in steps 4 and 5 may differ from the order shown on your PC 60 EDITING Dubbing e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT Tiboo Selection Keys 5 5 e t is not possible to dub copy protected contents error message will appear on the TV screen e t is not
116. function start playback in stop mode by using the number keys instead of the button to choose the track then press ENTER e To activate the PBC function when a PBC compatible Video CD SVCD disc is being played back without the PBC function press TOP MENU or press then press One Touch Replay DVD DVD Audio FA Ed EJ E2 E3 You can move back the playback position slightly Press e Each press skips back for approximately 7 seconds and resumes playback e Pressing while paused skips back for approximately 7 seconds and resumes pause Using The On screen BASIC OPERATIONS ON DVD DECK c 31 Disc type Select this for Repeat Playback rs pg 32 DVD DVD Audio RAM VIDEO cD The on screen bar allows you to control various playback functions Some of the functions operated on Navigation Menu can be controlled on the On screen bar Select this for Repeat Playback rs pg 32 Select this for time search function pg 33 1 2 3 4 Select this for search function rs pg 33 5 6 Select this to switch Simulated Surround Effect function t pg 34 Select this for Picture Control function pg 34 7 8 Select this to switch picture source type pg 34 ATTENTION The on screen bar can also be used for the HDD deck 9 Current status area for the selected item 10 Select this for Programme Playb
117. h DVD DVD Audio 69 kd E E3 E3 3 ES During playback press gt for forward variable speed search or 4 4 for reverse variable speed search e Each press of the button increases the search speed for each direction e To resume normal playback press For Audio CD You can perform 4 levels of speed search with gt 444 Audio is active also during variable speed search You cannot perform slow motion for each direction Reverse lt lt gt gt Forward Reverse Search Reverse Slow Motion Normal Forward Search 4 steps Play shops 3 steps Play 4 steps 60 15 5 3 1 Ve V Ms njajn 1 315115160 Still Picture Frame By Frame Playback A il E31 E3 E3 i o ES Press to pause during playback 2 Press SLOW lt lt SLOW gt gt to activate frame by frame playback e Each press of SLOW lt lt SLOW advances reverses the still picture frame by frame e Frame by frame playback for reverse direction cannot be performed with Video CD SVCD discs e To resume normal playback press 28 EN BASIC OPERATIONS ON DVD DECK Slow Motion Resume Function E Ed E31 E3 E3 1 Press II to pause during playback 2 Press SLOW lt lt or SLOW gt gt for 2 or more seconds e Each press of SLOW lt lt SLOW gt gt increases the slow motion speed for each direction e Slow mo
118. he TV screen pg 16 When OOOO using Live Memory playback NOTES e Live Memory Playback could be performed approximately 30 seconds after recording has started on the DVD RAM disc However for HDD Live Memory Playback is possible right after recording has started e Although high speed search up to approximately 30 seconds before the current recording point is possible during Live Memory Playback once the current recording point is reached the unit resumes normal playback and maintains a delay of approximately 30 seconds so that recording and playback can continue e When using Live Memory Playback during timer recording playback continues even after the end of the recording e When using Live Memory Playback during timer recording playback is automatically stopped just before recording starts and then recording starts when the time arrives for the next timer programme e It is impossible to perform ITR even if you press 6 during Live Memory Playback pg 41 Press to display the programme being recorded then perform ITR settings e Playback may be paused for a moment during Live Memory Playback which does not interfere with recording e Live Memory Playback cannot be performed while recording the source from DV input pg 62 DV Dubbing e When LIVE CHECK is pressed to display the picture currently being recorded the picture size may not be correct e Press or LIVE to stop Live Memory Playback e
119. he unit Some TVs or other appliances generate strong magnetic fields Do not place such appliances on top of the unit as it may cause picture disturbance When moving the product Press 5 l to turn off the power and wait at least 30 seconds before unplugging the power cord Then wait at least 2 minutes before moving the product IMPORTANT Connection to the mains supply in the United Kingdom DO NOT cut off the mains plug from this equipment If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point then obtain a proper safety approved extension lead adapter or consult your dealer In the unlikely event of the plug fuse failing be sure to replace the fuse only with an identical approved type as originally fitted and to replace the fuse cover If the fuse fails again consult your nearest JVC dealer If nonetheless the mains plug is cut off remove the fuse and dispose of the plug immediately to avoid a possible shock hazard by inadvertent connection to the mains supply If this product is not supplied fitted with a mains plug then follow the instructions given below DO NOT make any connection to the Larger Terminal coded E or Green The wires in the mains lead are coloured in accordance with the following code Blue to Neutral or Black mam Brown to L Live or Red If these colours do not correspond with the terminal identifications of your plug connect
120. he whole disc is played back repeatedly TRACK The current track is played back repeatedly TRACK REPEAT cannot be selected for JPEG discs To clear the on screen bar Press ON SCREEN To cancel Repeat Playback Repeat the above procedure from step 1 select OFF in step 3 then press ENTER NOTES e Repeat Playback is not possible for a Video CD SVCD with PBC function e Repeat Playback may not work properly depending on the type of the disc being used VIDEO CD You can repeat the desired part During playback 1 Press ON SCREEN twice to access the on screen bar 2 Press selection keys to select C 3 Press ENTER at the beginning of the desired part you want to repeat point A The elapsed playing time of the point A appears TITLE 99 CHAPTER 99 EACH 0 00 DVD 3D ON CINEMA AUTO us c5 tes C 4 Press ENTER at the end of the desired part you want to repeat point B The elapsed playing time of the point B appears e The selected part of the disc between point A and B is played repeatedly TITLE 99 CHAPTER 99 EACH 0 00 3D ON CINEMA AUTO mw Ow EI Ed To clear the on screen bar Press ON SCREEN To cancel A B Repeat Playback Press selection keys to select A B then press ENTER NOTES e A B Repeat Playback may not work properly depending on the type of disc being used e The subti
121. hen RESUME is changed to ON or OFF pg 72 resume points of the discs memorised with RESUME set to DISC RESUME will be cleared Resume points are memorised for each side of a double sided disc e When you switch to HDD during CD playback playback stops The Resume Function doesn t work when you switch to DVD thereafter to playback the disc CABLE SAT on e olco 3H pvp D OJO 0 9 7 QO ok 2 MARK ENTER VIE WO Selection Keys MENU 52 RETURN a a PREVIOUS gt gt gt gt gt j Ce d recmo 1 DISPLAY SET UP AUDIO SUBTITLE ANGLE Marking Positions To Play Back Again Later DVD DVD MCN IUUD MP3 RAM us MEC It is possible to mark positions up to 999 points where you want to play back once again later and start playback from a marked position Marking onto DVD RAM RW VR mode only discs when recording is helpful to locate a start point when you play back the discs later To mark positions During playback press MARK at positions you want to mark e MARK appears on the TV screen You can easily locate the marked positions using lt lt gt gt when you play back the disc To delete the marked positions While paused press ma a gt to locate a marked position you want to delete then pr
122. hile pressed Releasing the button resumes normal playback Available only when paused e Pressing down for 2 or more seconds advances playback at 1 16 times the normal speed 4 e Each press of the button during playback advances the playback speed in 5 steps in the reverse direction Available only when paused e Each press of the button reverses the still picture frame by frame e Pressing down for 2 or more seconds reverses playback at 1 16 times the normal speed Then each press of the button reverses slow motion at 1 16 times 1 4 times and 1 2 times the normal playback LIVE MEMORY PLAYBACK 45 gt gt e Each press of the button during playback advances the playback speed in 4 steps in the forward direction Available only when paused e Each press of the button advances the still picture frame by frame e Pressing down for 2 or more seconds advances playback at 1 16 times the normal speed Then each press of the button advances slow motion at 1 16 times 1 4 times and 1 2 times the normal playback on e Pressing once during Live Memory Playback or RetroActive Recording returns to the screen on air e Pressing twice during recording stops recording and returns to the screen on air e e Pressing once pauses playback still picture playback e Pressing repeatedly advances the still picture frame by frame JUMP Each press of the button during Live Memory Playback jumps back for the selected time inte
123. if it conforms to the standard if it was recorded or edited on the devices from other manufacturers or on a PC or if it has far too many titles or if there is very little available capacity remaining on the disc e DVD RAM discs recorded on this unit cannot be played back on an incompatible DVD player e It is possible to record copy once programmes of digital broadcasts only onto 4 7 9 4 GB DVD RAM discs 2 8 GB DVD RAM discs are not compatible e Although this unit supports 3x speed DVD RAM discs dubbing cannot be achieved at 3x speed DVD R RW Discs It is only possible to use DVD R discs which conform with DVD R standard Version 2 0 e Although this unit supports 8x speed DVD R and 4x speed DVD RW discs dubbing cannot be achieved at 8x speed and 4x speed respectively When a DVD R RW disc Video mode is finalised pg 80 it can be played back on a standard DVD player as a DVD VIDEO disc When DVD RW disc VR mode is finalised t pg 80 it can be played back on a standard DVD player compatible with the VR mode of DVD RW discs Before finalising itis possible to record on unrecorded areas of the disc edit the disc title and programme titles and delete programmes e It is impossible to record or edit DVD R RW discs recorded other devices even if they have not been finalised e t is impossible to overwrite recorded areas of DVD R discs e Available recording capacity does not increase even if a
124. ime is not correct Set date and time correctly pg 78 VIDEO Plus Timer Programming cannot be made e Date and time set on the unit is not correct Set date and time correctly pg 78 e The channel position does not correspond to that in the receiving area Set the correct channel position for the receiving broadcast pg 74 The VIDEO Plus system does not timer record properly e Theunit s channel positions have been set incorrectly Refer to VIDEO Plus System Setup rs pg 74 and reperform the procedure Automatic Satellite Programme Recording does not start e The satellite receiver is not connected properly to this unit Connect the satellite receiver to the 1 2 IN DECODER connector properly pg 51 On the front display panel appears e Power failure occurred Set date and time correctly pg 78 PROGRAMME FULL appears on the TV screen during timer programming e 32 programmes have already been timer programmed Clear unnecessary programmes on the unit then try timer programming again gt pg 50 The disc space does not increase when recorded titles are cleared e The PC s data recorded on a DVD RAM drive cannot be cleared on this unit Format the disc When the disc is soiled wipe the disc with a soft dry cloth before formatting pg 10 79 TROUBLESHOOTING 83 Other Problems The image of the TV b
125. in both 16 9 and 4 3 you must select one aspect ratio PRIORITIZE 4 3 If you select PRIORITIZE 4 3 even a title recorded in 16 9 is dubbed in 4 3 PRIORITIZE 16 9 If you select PRIORITIZE 16 9 even a title recorded in 4 3 is dubbed in 16 9 m VIDEO MODE RECORDING AUDIO MAIN SUB This is the setting for the audio channel to be selected when dubbing titles to DVD discs in video mode Select either one of the two settings if the titles to be dubbed have two audio channels MAIN Select this to dub the main channel SUB Select this to dub the sub channel m MP3 amp WMA JPEG MP3 amp WMA JPEG You can select files to play back when both MP3 amp WMA files and JPEG files are recorded on a disc MP3 amp WMA Select this to play back MP3 WMA files JPEG Select this to play back JPEG files REC PLAY SET UP MODE REC AUDIO DOLBY DIGITAL LINEAR PCM You can select the audio format when you record a title in XP mode When this function is set to LINEAR PCM you can obtain a high quality audio sound DOLBY DIGITAL To record in Dolby Digital format LINEAR PCM To record in Linear PCM format AUDIO REC NICAM MONO You can select the desired NICAM audio channel to be recorded on a DVD R RW Video mode disc NICAM To record the main and sub language of NICAM audio MONO To record the standard monaural sound of NICAM audio NOTE This function works only for th
126. ing either an optional optical cable or an optional coaxial cable 2 Place a disc on the unit and load an MD on the connected digital audio device 3 Select the audio to be dubbed 4 start playback slightly before the actual point from where you wish to start dubbing 5 Press II to pause playback 6 Select the input mode on the connected digital audio device 7 Press gt to start playback on the unit 8 start recording on the digital audio device 9 Stop recording on the digital audio device Then press to stop playback on the unit NOTE There may be a discrepancy of several seconds between where you intend editing to start and where it actually starts 64 en EDITING Eit From A Camcorder e Slide the TV CABLE SAT DVD switch to DVD You can use a camcorder as the source player and your unit as the recording deck If the camcorder has no S VIDEO output connector af So La 9 Recorder To VIDEO AUDIO MONO L R input Audio video cable not supplied o 3 o o o 5 Q lt o 5 5 m TJ eg 000 6 Fo Ek ooo Ct c T
127. ing your unit as the recording deck set L 2 SELECT to S VIDEO rs pg 67 2 When using this unit as the recording deck press HDD or DVD to select the recording deck 3 When using this unit as the recording deck press PR to select L 2 e Set L 2 SELECT to VIDEO or S VIDEO pg 67 4 when using this unit as the recording deck press REC MODE repeatedly to set the recording mode 5 Engage the Play mode of the source player 6 Engage the Record mode of the recording deck 7 Stop recording on the recording deck then stop playback on the source player NOTES All necessary cables can be obtained from your dealer e For Y C signal input output be sure to use a 21 pin SCART cable that is compatible with the Y C signal e When you use this unit as the source player for editing be sure to set SUPERIMPOSE to OFF before starting pg 73 If you are using another recorder with S Video and Audio output connectors connect its S Video and Audio output connectors to this unit s S VIDEO and AUDIO input connectors on the front panel Then set the unit s input mode to F 1 in step 3 and set F 1 INPUT to S VIDEO pg 67 66 EN EDITING Output Input Set e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT Hos gt ENTER S
128. is not registered in the library has been inserted Register the disc as necessary vs pg 58 INSERT DISC XXXX e Appears when a title that has been selected in the library is not contained in the loaded disc CAN NOT RECORD OR MAKE PLAY LIST DELETE UNWANTED TITLES 5 2 o9 m eg 35 a5 Se ES ez gt DS o9 o 5 3 2 e The number of play lists exceeds 99 SET CLOCK BEFORE TIMER PROGRAMMING set the timer programme the clock must be set in advance pg 78 PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMMES e You can programme this unit to timer record as many as 32 programmes To programme more you need to cancel a timer programme already set rs pg 50 DISC NOT LOADED e Operation has been attempted when a disc is not loaded or loaded upside down rs pg 9 DISC NOT RECORDABLE INSERT RECORDABLE DISC e When a playback only disc or a finalised disc is loaded has been pressed rs pg 6 PLUSCODE NO ERROR CONFIRM PLUSCODE NO THEN RETRY e An invalid PlusCode number has been input pg 47 GUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM THEN RETRY e To set the timer programme using the VIDEO Plus system the Guide Programme Number must be set in advance r pg 74 CAN NOT SET VIDEO PLUS TIMER PROGRAMMING DURING TIMER RECORDING OR INSTANT TIMER RECORDING e Appears when you tried to input a PlusCode number during tim
129. ive scan 73 LIST OF TERMS 91 R Random Playback 35 Receiving Stereo And Bilingual Programmes 39 41 Recordable Playable Discs 6 Recording Medium And Format 8 Recording Mode 37 40 Region Number nhau ia dna 7 Register DISC tee dea ena XR Rer 58 Relief Recording 49 Repeat 32 Resume Function 28 Resuming Playback 46 RetroActive Recording 46 S Select The Switching Interval Of The Slide Show 35 Selection Of The Audio Channel To Be Recorded IUD ES 39 Setting The Progressive Mode 34 Simulated Surround Effect 34 Simultaneous Recording and Playback 46 Skip Search onere 28 42 Slow Motion 28 42 Still Picture Frame By Frame Playback 27 42 Subtitle Selection 30 T Temporary Recording 46
130. lated Surround Effect is activated e Each time you press ENTER 3D ON appears and disappears alternately TITLE 99 EACH 0 00 DVD 3D0N CINEMA AUTO ws Om tien C To clear the on screen bar Press ON SCREEN To cancel the simulated surround effect Press ENTER to clear 3D ON from the screen NOTES e Simulated Surround Effect works correctly only when playing back a title recorded in multichannels e Simulated Surround Effect does not affect the DVD VIDEO bitstream signal from the DIGITAL AUDIO OUT connectors e When Simulated Surround Effect is activated the settings of ANALOG AUDIO OUT and RANGE CONTROL are disabled t pg 71 e Simulated Surround Effect cannot be activated under the following conditions e When the HDD deck is in the recording mode e When the HDD or DVD deck is in the timer standby mode e When a disc containing both the Dolby Digital 5 1 CH and 2 CH sound formats is playing back a scene that is not in the 5 1 CH sound format Adjusting The Picture Quality CHAPTER 99 DVD DVD Audio RAM VIDEO cD You can obtain optimal picture quality by selecting an appropriate picture mode 1 Press ON SCREEN twice to access the on screen bar 2 Press selection keys to select Gay then press ENTER The pop up window appears under the selected item TITLE 99 CHAPTER 99 EACH 0 00 DVD CINEMA AUTO nes A 3 Press
131. le is played back then the playback pauses at the dividing point e To undo the division press selection keys to select RETRY then press ENTER Repeat the above procedure to locate another point to divide Press selection keys to select OK then press ENTER 7 Press selection keys to select DIVIDE then press ENTER e Select CANCEL then press ENTER to return to the previous screen 8 Press EDIT to return to the normal screen NOTE There may be a discrepancy of several seconds between the scene you intend to edit and the scene which is actually edited Modify Chapter HDD DVD RAM amp DVD RW VR mode only You can create and delete chapter marks in titles 1 Perform steps 1 4 of Modify Index ts pg 53 before continuing 2 Press selection keys to select CHAPTER then press ENTER 3 Press to start playback Press lt lt gt then press at the positions you want to mark 4 Press selection keys to select MARK then press ENTER e To undo the marking press selection keys to select RETRY then press ENTER e Repeat the above steps 3 and 4 to locate another point to mark 5 Press 1 44 or eto select one chapter you want to delete press selection keys to select ERASE then press ENTER e To undo the deletion press selection keys to select RETRY then press ENTER 6 Press EDIT to return to the normal screen NOTE There may be a di
132. le to set L 2 SELECT to DECODER or SAT S VIDEO e If L 1 OUTPUT is set to COMPONENT and L 2 SELECT to SAT VIDEO SAT S VIDEO or DECODER be sure to connect the L 1 IN OUT connector with a TV If L 2 SELECT is set to SAT S VIDEO be sure to set L 1 OUTPUT to SCART S VIDEO Set F 1 INPUT to the appropriate mode depending on the connector VIDEO or S VIDEO being used on the front panel 1 Perform steps 1 and 2 of L 1 Output And L 1 Input Setting t pg 66 2 Press selection keys to select F 1 INPUT then press ENTER 3 Press selection keys to select the appropriate setting then press ENTER 4 Press SET UP to complete the setting DA eka FUNCTION SET UP REC PLAY SET UP DISPLAY SET VIDEO IN OUT MONITOR TYPE 4 3LB L4 T L 1 INPUT SCART VIDEO L 2 SELECT VIDEO SELECT WITH 4 THEN PRESS ENTER PRESS SET UP TO EXIT ENTER arsi EXIT SELECT The boldface settings below indicate the settings at your purchase F 1 INPUT VIDEO S VIDEO VIDEO When connecting an appliance to the VIDEO input connector set to VIDEO S VIDEO When connecting an appliance to the S VIDEO input connector set to S VIDEO 68 EN REMOTE CONTROL Remote Control Functions Remote Control 1 2 3 4 Code Switching The remote control is c
133. lised these chapter marks are deleted and new chapter marks are assigned automatically approximately every 5 minutes DVD RAM DVD RW DVD R or DVD VIDEO disc Title 1 Title 2 Chapter 2 Chapter 3 Chapter 1 Chapter2 Chapter 3 DU e Video mode even before finalising it is impossible to perform editing operations other than changing the disc name and or title names and deleting programmes and or titles e After finalising it is impossible to perform editing operations Chapter 1 Audio CD Video CD SVCD Typically Audio CD discs are divided into separate tracks each containing one song Each track is assigned a number For example the third track is Track 3 The same is true for Video CD SVCD discs However some discs are not divided into tracks Audio CD Video CD SVCD Track 1 Track 2 Track 3 Track 4 lt Disc CD R RW ROM MP3 JPEG files put in directories nested in several levels on a disc will be organized as if they were put in single level directories groups by the MP3 JPEG Navigation of this unit rs pg 59 File structure of a disc before starting the MP3 JPEG Navigation Root file 1 mp3 file3 mp3 file 4mp3 2 H POPS flle 5 mp3 Europe ROCK H 6 mp3_ France 9 jpeg lt file 7 jpeg file 8 jpeg C Directory C MP3 file
134. mote control s batteries e Some brands of satellite receivers have more than one code If the satellite receiver does not function with one code try entering another 3 Press the corresponding buttons to operate the satellite receiver l PR number keys e For some brands of satellite receivers you must press ENTER after having pressed the number keys e The number keys may not function with some satellite receivers 70 SYSTEM CONNECTIONS Connecting To A Satellite Receiver Connect the satellite receiver to the L 2 IN DECODER connector then connect the L 1 IN OUT connector to the TV s connector NOTES e Set L 2 SELECT to VIDEO or S VIDEO pg 67 e You can use the Automatic Satellite Programme Recording function pg 51 with this connection HDD deck only e To record a programme via the satellite receiver select L 2 mode by pressing PR so that L 2 appears on the front display panel e For details refer to the instruction manual of the satellite receiver mdi unit Satellite cable Aerial TV aerial cable X ANTENNA IN ANTENNA OUT DECODER vor v Satellite receiver a5 5 o IMPORTANT When you set L 2 SELECT to SAT VIDEO or SAT S VIDEO pg 67 itis possible to view a
135. moves up and down regularly but this is not a malfunction 62 EDITING The following on screen display for DV dubbing appears when DV Dubbing ON SCREEN is pressed while the channel has been set to DV You can dub programmes from a camcorder or DV equipment connected the unit with a DV cable The unit s remote control Froan 00 0 00 00 00 0 allows you the limited control of the connected camcorder or DV equipment functions during dubbing 5 NOTES e Use the DV cable VC VDV 204U for connection e When you connect a PC to the DV IN connector we do not II er cer T assure the normal operation of this unit Your unit 1 2 3 1 Remote control switch To switch between the devices operable by the remote control unit The unit is operable when the remote icon te displayed faces to the left while the DV device is operable when the remote icon is facing to the right 2 Auto capture button Select to start or pause the dubbing If ENTER is pressed when the DV device is in the pause condition preroll editing where it is possible to dub with a start time that is highly accurate will be activated When the DV device cannot be operated from the unit such as in camera mode proceed with normal recording pg 37 40 Preroll editing refers to the playback after the DV tape is slightly rewind
136. mp Scan PS and Letter Box LB Pan amp Scan The right and left side of the image are cut off The image fills the screen e The picture will be shown in the 4 3LB mode depending on the disc even if the 4 3PS mode is selected Letter Box Black bands appear at the top and bottom of the image The image itself appears in 16 9 aspect ratio 24 en SAT CONTROL SET The following procedure is required if you receive satellite Satellite Receiver Control Setting channels through a satellite receiver Approximately 20 seconds before the VIDEO Plus timer programming gt pg 47 or Manual Timer programming pg 49 starts the unit sets its input mode to L 2 and automatically switches the satellite receiver s channels using the provided Satellite Controller Satellite receiver Installing Satellite Controller 1 Place the Satellite Controller so that the path between its transmitter and the satellite receiver s remote sensor is unobstructed 2 securely using the adhesive strip attached on the back of the Satellite Controller 3 Be sure to connect the unit s L 2 IN DECODER connector to Your unit Satellite Controller the satellite receiver s 21 pin SCART connector supplied suggested location NOTE uu When connecting your satellite receiver refer to its instruction Transmitter manual 4 Connect the Satellite Controller to the SAT CONT
137. n select CANCEL then press ENTER 6 Press EDIT to return to the normal screen NOTE Even if a play list is deleted the titles recorded and the library information are not affected at all Modify Index Perform steps 1 4 of Edit Scenes t pg 56 before continuing Perform steps 5 8 of Modify Index rs pg 53 SiS ORIGINAL 14 PLAYLIST 0 EXT lt seect 1 Press NAVIGATION The Library Database Navigation screen appears 2 Press selection keys to select PLAY LIST then press ENTER 3 Press selection keys to select the index small pictures of the desired play list then press ENTER SELECT WITH When you want the THEN PRESS ENTER plural play lists to be played back continuously press IGI as ENTER MEMO after selecting the desired play lists The numbers of the playback order appear on the index You can select up to 30 play lists e When you want to correct the order move the arrow to the desired index and press MEMO The number disappears and the unit re numbers the other play lists automatically e When you want to cancel the order press CANCEL X 4 Press selection keys to select BEGINNING then press ENTER The playback starts e Upon completing play list playback the normal screen will resume e The normal screen will also resume when lil is pressed to stop play list playback NAV
138. n this case you need to delete old titles to register new ones pg 54 NOTES e Once a DVD R RW Video mode disc has been finalised the displays for original and play list do not appear Only display for library appears e When you move the title recorded on HDD to DVD the icon will be changed to e Sound of received channel may be interrupted while the Library Database Navigation screen is displayed e The order of index which are displayed by pressing DUBBING differs from the images displayed by pressing NAVIGATION or EDIT e You cannot perform timer recording during editing of thumbnail images or play lists by pressing EDIT Press EDIT to clear the Editing screen before performing timer recording Scan For Beginning Of Title e Load a DVD disc to scan e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to choose the corresponding deck CABLE SAT ENTER MEMO NAVIGATION Selection Keys gt You can scan the beginning of the title easily with the Library Database Navigation 1 Press NAVIGATION The Library Database Navigation screen appears 2 Press selection keys to select ORIGINAL then press ENTER 3 Press selection keys to select the index small pictures of the desired title then press ENTER e When you want the plural titles to be played back continuously pres
139. ng guide for latest information If the channel you intend to record does not offer a PDC service your unit will not start recording if PDC has been selected Be sure to set PDC to OFF if PDC is not available on your selected channel See step 8 on page 47 NOTES e Make sure to press VPS PDC after completing timer programming procedure to activate the VPS PDC recording function The VPS PDC recording indicator lights up on the front display panel when VPS PDC recording function is activated However it will blink rapidly when VPS PDC is pressed under the following conditions e Clock is not set e Timer programming has not been set e Disc is not loaded e HDD is full e When you use Manual Timer Programming set the start time VPS or PDC time exactly as advertised in the TV listing A different time than advertised will result in no recording e VPS PDC recording is also possible when a satellite receiver or a cable system is connected to L 2 IN DECODER connector on your unit e VPS PDC recording is also possible via the L 1 IN OUT connector e When timer recording via VPS PDC recording is in progress it is not possible to switch between the HDD and DVD deck and the following menus cannot be displayed e Main Menu e Library Database Navigation Menu e Editing Menu e f the unit is powered on when set to record a timer programme onto HDD DVD using VPS PDC the PDC information will not be used The programme will be
140. ngs provided according to the instructions allow electrical equipment to be exposed to rain or moisture ABOVE ALL NEVER let anyone especially children push anything into holes slots or any other opening in the case this could result in a fatal electrical shock NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry SAFETY FIRST Safety Precaution S versek nene neret mn nuns Some Do s And Don ts On The Safe Use Of Equipment DISC INFORMATION About Discs necem rere rene PAPE ERR PERROS INDEX 11 INSTALLING YOUR NEW UNIT 18 Basic Connections enne enne 18 INITIAL SETTINGS 19 19 Preset Download ssesssssseseeeeeeenenenn enemies 20 Language EET 22 MonilOr Set is eee eri eere exerit e hendre eg 23 SAT CONTROL SET 24 Satellite Receiver Control Setting 24 BASIC OPERATIONS ON DVD DECK 26 Basic Playback Playback Features Using The On screen Bar essen 31 ParentalLock nine Basic Recording T Recording Features eee nennen nenne nnne 38 BASIC OPERATIONS ON HDD DECK 40 Basic Recording rrt enne 40 Recording Features 41 Basic Playback 42 Playback Features eese nene ennt 42 LIVE MEMORY PL
141. nit e Additional recordings become impossible Finalise A DVD R RW Disc 1 Perform steps 1 to of Format DVD RAM Disc i pg 79 before continuing 2 Press selection keys to select FINALISE then press ENTER e For DVD R RW Video mode discs the background selection screen will appear Press selection keys to select the desired background from a selection of 18 backgrounds then press ENTER 3 Press selection keys to select OK then press ENTER 4 Upon completing finalisation COMPLETED appears on the TV screen Press ENTER to end 5 Press SET UP to return to the normal screen e Menu screen is cleared e Once a DVD R RW Video mode disc has been finalised the displays for original and play list do not appear Only display for library appears e Once a DVD RW VR mode disc has been finalised it can be played on DVD players compatible with VR mode Cancel The Finalisation Of A DVD RW Disc 1 Load a DVD RW disc to cancel the disc finalisation and perform steps 1 to of Format A DVD RAM Disc pg 79 before continuing 2 Press selection keys to select CANC FINALIS then press ENTER 3 Press selection keys to select EXECUTE then press ENTER 4 Upon completing cancellation of finalisation CANCELLATION COMPLETED appears on the TV screen Press ENTER to end 5 Press SET UP to return to the normal screen e When the disc finalisation is cancelled the mode in which the
142. nit the Auto Set Up function sets the tuner channels clock and Guide Programme numbers automatically Jo 00 6 Fo DJ A H7 Selection Keys AVS Before starting make sure of the following e The TV aerial cable should be connected to the unit e The unit s mains power cord should be connected to a mains outlet e Turn on the TV and select the AV mode Slide the TV CABLE SAT DVD switch to DVD 1 Press on the unit or DVD 0 1 on the remote control to turn on the unit The AUTO SET T V LINK display appears on the TV screen 2 Press selection keys to select AUTO SET then press ENTER The AUTO SET screen will appear e When AUTO SET is completed SCAN COMPLETED appears on the TV screen Select e a INITIAL SET UP gt AUTO CH SET 2 X SELECT WITH THEN PRESS ENTER PRESS SET UP TO EXIT SETUP a ENTER EXT SELECT INITIAL SET UP gt AUTO SET AUTO SET PLEASE WAIT C CANCEL SETUP ENTER SELECT WITH 4 THEN PRESS ENTER PRESS SET UP TO EXIT EXT SELECT INITIAL SETTINGS 19 ATTENTION AUTO blinks on the front display panel do NOT press any button on the unit or remote control until the front display panel shows
143. nly possible to set L 1 OUTPUT to SCART VIDEO Component video signals are not output from the L 1 IN OUT connector e When Progressive scan mode is engaged it is not possible to select the setting of L 1 OUTPUT rs pg 66 L 2 Select Setting EDITING 67 F 1 Input Setting Set L 2 SELECT to the appropriate mode depending on the type of appliance connected to the unit s 1 2 IN DECODER connector 1 Perform steps 1 and 2 of L 1 Output And L 1 Input Setting pg 66 2 Press selection keys to select L 2 SELECT then press ENTER 3 Press selection keys to select the appropriate setting then press ENTER 4 Press SET UP to complete the setting OAT OR FUNCTION SET UP REC PLAY SET UP DISPLAY SET VIDEO IN OUT cru I S SELECT WITH 4 THEN PF PRESS SET UP TO EXIT SETUP em ENTER merne SELECT The boldface settings below indicate the settings at your purchase L 2 SELECT VIDEO S VIDEO SAT VIDEO SAT S VIDEO DECODER Select VIDEO or S VIDEO to use this unit as the recording deck with the player connected to the L 2 IN DECODER connector or to use the satellite receiver connected to the L 2 IN DECODER connector VIDEO If a connected appliance s output is compatible only with regular video signals set to VIDEO S VIDEO If a connected appliance s output is compatible
144. ns outlet Dangerous voltage inside Refer internal servicing to qualified service personnel To prevent electric shock or fire hazard remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS WARNING LABEL INSIDE OF THE UNIT CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS ADVARSEL SYNLIG USYNLIG LASERSTRALING VED ABNING UNDGA UDSAETTELSE FOR STRALING SE IKKE IND STRALEN HELLER IKKE MED OPTISKE INSTRUMENTER ADVARSEL SYNLIG OG USYNLIG LASERSTRALING NAR DEKSEL APNES UNDGA EKSPONERING FOR STRALEN STIRR IKKE INN STRALEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER VARO AVATTAESSA OLET ALTTIINA N KYV JA N KYM T N LASERSATEILYLLE ALA TUIJOTA SATEESEEN ALAKA KATSO SITA OPTISEN LAITTEEN LAPI VARNING SYNLIG OCH OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD STRALEN AR FARLIG STIRRA EJ IN STRALEN OCH BETRAKTA EJ STRALEN MED OPTISKA INSTRUMENT e Manufactured under licence from Dolby Laboratories Dolby and double D symbol are trademarks of Dolby Laboratories e DTS and DTS DIGITAL OUT are trademarks of Digital Theater Systems Inc e VIDEO Plus and PlusCode are registered trademarks of Gemstar Development Corporation The VIDEO Plus system is manufactured under license from Gemstar Development Co
145. nt station STATION NAME ID STATION NAME ID Anglia TV ANGL RB1 RB1 ARD ARD RB3 RB3 ARTE ARTE Rikisutvarpid S RKPS BBC Group BBC RTBF 1 RTB1 BBC1 BBC1 RTBF 2 RTB2 BBC2 BBC2 RTE 1 RTE1 BBCW BBCW RTL RTL Berlin 1 BLN1 RTL 2 RTL2 Berlin 2 BLN2 RTP RTP Border TV BORD SAT SAT Bayern1 BR1 SAT 1 SAT1 Bayern3 BR3 Scottish TV SCOT BRT1 BRT1 SC4 SCA BRT2 BRT2 SDR SDR Children Ch CHLD SDR1 SDR1 Canal CH SFB1 SFB1 CNN CNN SFB3 SFB3 Channel TV CHNL SKY SKY Central TV CNTR Sky One SKY1 Channel 4 CH 4 Sky Net SKYN Channel 5 CH5 Sport SPRT DISC DISC SR1 SR1 DRS DRS Super RTL SRTL DRTV DRTV STV Test STVT DSF DSF STV 1 STV1 Euronews EURN STV 2 STV2 Euronews EURO Suedwest3 SWR Eurosports EURS SWF 1 SWF1 France1 FR1 Schweiz4 SWZA4 France2 FR2 TYNE TEES TEES France3 FR3 Text TEXT Granada TV GRNA TF1 TF1 Grampian TV GRMP TNT int TNT Hessen1 HR1 TRT int TRT Hessen3 HR3 TSI TSI HRT HRT TSR TSR HTV HTV TSW TSW ITV Network ITV1 TVE TVE Kabelkanal KABL TV Polonia TVPA London LNDN TVP 1 TVP1 MDR MDR 2 TVP2 MTV MTV TVS TVS Nord3 TV2 TV2 NDR1 NDR1 TV5 TV5 NDR3 NDR3 Tele Zurich TZUR NED1 NED1 Ulster TV ULST NED2 NED2 Veronica VERN NED3 NED3 VIVA VIVA Network 2 NET2 VIVA2 VIV2 NRK NRK VOX VOX N TV N TV VTM VTM Offener Kanal OKAN VT4 VT4 1 West1 WDR1 ORF2 ORF2 West3 WDR3 ORF3 ORF3 YLE 1 YLE1 OWL 3 OWL3 YLE 2 YLE2 Premiere PRMI Yorkshire TV YORK PRO7 PRO7 ZDF ZDF Zurich 1 ZUR1 RAI2 RAI2 3SAT 3SAT
146. o S VIDEO input To AUDIO input Audio cable not supplied S VIDEO OUT ia 4 4 AUDIO OUT 1 Make connections 1 If the camcorder has no S VIDEO output connector connect the camcorders AUDIO VIDEO OUT connectors to the unit s VIDEO AUDIO MONO L R input connectors on the front panel e When using a monaural camcorder connect its AUDIO OUT connector to the AUDIO L input connector on your unit 2 If the camcorder has an S VIDEO output connector connect the camcorders AUDIO OUT and S VIDEO OUT connectors to the unit s AUDIO and S VIDEO input connectors on the front panel 2 Press HDD or DVD to select the recording deck Press PR to select F 1 e Set F 1 INPUT to VIDEO for the VIDEO input connector or S VIDEO for the S VIDEO input connector depending on the connector being used pg 67 4 Press REC MODE repeatedly to set the recording mode 5 Start playback on the camcorder slightly before the actual point from where you wish to start dubbing Press on the unit to start recording Or while holding press gt on the remote control The dubbing starts 7 Press on the unit then stop playback on the camcorder NOTES e All necessary cables can be obtained from your dealer e Refer to the camcorder s instruction manual for operating procedure e The quality of dubbed picture becomes poorer than th
147. o 0 To modify the SELECT WITH 4 programme settings THEN PRESS ENTER y MODIFY SELECTED TIMER PROGRAMME Press selection keys onia uisu MODIFY to select MODIFY then press ENTER m ENTER SELECT 2 Change the settings of the desired recording options as required e Refer to steps 4 12 in Manual Timer Programming c pg 49 To skip the weekly daily programmes to the next week day It is easy to temporarily cancel weekly daily programmes of a week day 1 Press selection keys to select PROGRAMME SKIP then press ENTER 2 Press selection keys to select SKIP then press ENTER To save the titles of weekly daily programmes HDD Deck Only Use this function to avoid overwriting titles of weekly daily programmes of a previous week day 1 Press selection keys to select TITLE then press ENTER 2 Press selection keys to select SAVE then press ENTER NOTE This function is available only when the remaining capacity of the hard disc is sufficient Automatic Satellite Programme Recording HDD Deck Only This function allows you to automatically record a satellite programme which is timer programmed on your external satellite receiver Connect a satellite receiver to the unit s L 2 IN DECODER connector and programme the timer on the satellite receiver The unit starts or stops recording by the signals input from the satellite receiver
148. o track only during 1 5x speed search Still Picture Frame By Frame Playback 1 Press II to pause during playback 2 Press SLOW lt lt or SLOW gt gt to activate frame by frame playback e Each press of SLOW lt lt or SLOW gt gt advances reverses the still picture frame by frame To resume normal playback press Slow Motion 1 Press II to pause during playback 2 Press SLOW lt lt or SLOW gt gt for 2 or more seconds e Each press of SLOW lt lt SLOW gt gt increases the slow motion speed for each direction Skip Search During playback press x e Each press initiates an approximately 30 second period of fast motion playback Normal playback resumes automatically BASIC OPERATIONS ON HDD DECK ey 43 One Touch Replay Marking Positions To Play Back Again Later Hie id back the playback position slightly It is possible to mark positions up to 999 points where you want e Each press skips back for approximately 7 seconds and resumes playback e Pressing while paused skips back for approximately 7 seconds and resumes pause 1 5x Speed Playback You can play back a title quickly The sound will also be played back faster than normal speed during 1 5x speed playback 1 5x speed playback cannot be performed during recording on HDD or DVD 1 Press lt 4 to locate the point to start 1 5x speed playback from 2 Press gt to resume playback
149. on the recording side before use Scratches and dirt on the recording side of a disc may hinder proper playback and recording Also be careful that a DVD RAM disc may get scratched or dirty when removed from cartridge then put back in after use Storage Make sure that discs are kept in their cases If discs are piled on top of one another without their protective cases they can be damaged Do not put discs in a location where they may be exposed to direct sunlight or in a place where the humidity or temperature is high Avoid leaving discs in your car Maintenance of discs If there are fingerprints or other dirt adhering to a disc wipe with a soft dry cloth moving from the centre outwards If a disc is difficult to clean wipe with a cloth moistened with water Never use record cleaners petrol alcohol or any anti static agents CAUTION Sometimes during playback noise may appear or images may be garbled This is sometimes due to the disc It may not be up to industry standards These symptoms are caused by the discs not by the malfunction of the unit Front View INDEX en 11 O TSTANDBYION Infrared Beam Receiving Window Front Display Panel pg 13 Disc Tray Open Close Button 4 t pg 9 Stop Button pg 26 42 Play Button gt c pg 2
150. only when recording the channels of external sources L 1 L 2 1 and DV While holding press on the remote To resume recording while holding press gt on the remote No operation can be made with the buttons on the unit Recording Mode MPEG 2 format is used as recording format As a guide for picture quality the bps unit is used to represent how much data can be recorded per second The larger this value is the better the picture quality becomes but more capacity is required for the recording Select XP or SP for programmes where quick movement occurs Such as sports programmes and LP or EP for talk shows etc with relatively less movement Recording mode Maximum recording time approx XP 53 hours SP 109 hours LP 218 hours EP 328 hours FR480 473 hours e For details on FR mode refer to Free Rate Function rs pg 39 NOTE The maximum recording time stated in the above table are the approximate time under unused condition Recording Features e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD on the remote so that the HDD lamp lights up on the unit HDD HDD lamp meses CABLE SAT TV DVD co TV AV VIDEO 272 HDD gt o PR 38 0 AD WU 80190 n a y Y E
151. ont display panel e Each time you press DISPLAY the time indication changes as follows Elapsed recording time Disc remaining time Clock Back to the beginning Receiving Stereo And Bilingual Programmes Your unit is equipped with a Digital stereo sound decoder NICAM making reception of stereo and bilingual broadcasts possible When the channel is changed the type of broadcast being received will be displayed on the TV screen for a few seconds Type of Broadcast Being On Screen Display Received Regular Monaural Sree NICAM Stereo NICAM Bilingual NICAM Monaural 5 e SUPERIMPOSE must be to AUTO Otherwise the on screen displays will not appear rs pg 73 e If the quality of stereo sound being received is poor the broadcast might be received in monaural with better quality 42 BASIC OPERATIONS ON HDD DECK Basic Playback Playback Features e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV DVD gt HDD ENTER ATTENTION e It may take a few seconds to start playback This is not a malfunction e Forward reverse high speed search and other operations cannot be perf
152. ormed while playback is stopped Press HDD so that the HDD lamp lights up on the unit 2 Press to start playback e The Library Database Navigation also enables you to search and select the desired programmes rs pg 53 3 Press to pause playback e To resume normal playback press 4 Press to stop playback NOTE When the Library Database Navigation screen appears choose a thumbnail image of the desired title on the TV screen then press ENTER pg 53 e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD so that the HDD lamp lights up on the unit CABLE SAT DVD HDD MARK gt 94 gt gt 4 4 SLOW gt gt SLOW JUMP lt JUMP ON SCREEN Variable Speed Search During playback press gt for forward variable speed search or 44 for reverse variable speed search e Each press of the button increases the search speed for each direction e To resume normal playback press Reverse lt lt gt gt Forward Reverse Search Reverse _ Reverse Slow Motion Normal Forward Search 4 steps Play Slow Motion 3 steps Pla 5 steps 3 steps y P 60 15 5 3 1 61141702 1 15 3 5 15 60 NOTE You can hear the normal audi
153. orts Number of angles Marks related to video Number of subtitles Recorded under the Screen includes standard 4 3 aspect 5 black bands at the ratio top and the bottom of image which has a standard 4 3 aspect ratio letter box Video playback is in Wide video mode 16 9 on wide televisions but in letter box on televisions with standard 4 3 aspect ratio Video playback is in Wide video mode 16 9 on wide televisions but pan and scan is used on televisions with standard 4 3 aspect ratio either the left or right side of the image is cut out B Marks related to audio Number of audio tracks Dolby Digital mark It has been developed by Dolby Laboratories as DIGITAL digital surround system DTS Digital Theater Systems DIGITAL You can enjoy DTS audio if you connect an amplifier with a built in DTS decoder to the SURROUND DIGITAL OUT connector of the unit Opening the disc tray Press 4 to open the disc tray NIST 00 DVD e Pressing the button again closes the disc tray Use the button to open and close the disc tray Do not block the disc tray with your hand while it is opening or closing as this may result in hardware failure e Do not place unplayable discs or any object other than a disc on the disc tray e Do not press down strongl
154. our SP Approx 2 hours LP Approx 4 hours EP Approx 6 hours FR Approx 1 hour 8 hours Audio recording system Dolby Digital 2 ch Linear PCM XP mode only Video recording compression system MPEG 2 CBR VBR SPECIFICATIONS 85 VIDEO AUDIO HDD Deck Video recording compression system MPEG 2 VBR Audio recording system Dolby Digital 2 ch Linear PCM XP mode only Recording time Maximum 473 hours with 250 GB HDD XP Approx 53 hours SP Approx 109 hours LP Approx 218 hours EP Approx 328 hours FR Approx 473 hours TUNER TIMER Signal system PAL colour signal and CCIR monochrome signal 625 lines 50 fields TV channel storage capacity 99 positions AUX position Tuning system Frequency synthesised tuner Channel coverage VHF 44 5 MHz 143 MHz 143 MHz 470 MHz UHF 470 MHz 862 MHz Memory backup time Approx 60 minutes ACCESSORIES Provided accessories RF cable 21 pin SCART cable Satellite Controller Infrared remote control unit AA battery x 2 E amp O E Design and specifications subject to change without notice ATTENTION This unit contains microcomputers External electronic noise or interference could cause malfunctioning In such cases switch the unit off and unplug the mains power cord Then plug it in again and turn the unit on Take out the disc After checking the disc operate the unit as usual
155. our satellite receiver e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT ea VET DVD Olo AUX ENTER Selection Keys AVS 9 0 0 0 1 v WJ omc 09 oo SET UP Guide Programme Number Set 1 Press SET UP to access the Main Menu screen 2 Press selection keys to select INITIAL SET UP then press V 3 Press selection keys to select TUNER 00 a INITIAL SET UP TUNER CLOCK SET SET then press V 4 Press selection keys to select GUIDE PROG SET then SAT CONTROL SET GUIDE PROG SET press ENTER 545 59 SETUP a ENTER SELECT WITH 4 THEN PRESS ENTER IR PRESS SET UP TO EXIT EXIT 5 Press selection keys to select GUIDE INITIAL SET UP gt GUIDE PROG SET PROG then press LL ENTER Press selection keys to select the Guide Programme number for i i the desired station as MM shown in the TV g z PRESS ENTER listings Then press ENTER 7 Press selection keys to select PROG then press ENTER Press selection keys to select the number of the unit s channel position on which
156. patible DVD RAM DVD RW DVD R It may even take several minutes when a disc is dirty scratched or warped e It may take a few seconds to start playback This is not a malfunction e Forward reverse high speed search and other operations cannot be performed while playback is stopped To play back an MP3 JPEG disc see Playback With MP3 WMA JPEG Navigation pg 59 Load disc e For details refer to Placing A Disc t pg 9 e Pressing gt also closes the disc tray e Playback begins automatically if an auto playback DVD disc is loaded 2 Press DVD so that the DVD lamp lights up on the unit Press gt to start playback e If you load a DVD disc whose region code does not match the unit REGION CODE ERROR appears on the TV screen For details refer to Region Number pg 7 e If CAN NOT PLAY BACK DISC UNDER CURRENT SETTING appears on the TV screen refer to Parental Lock t pg 36 e With Video CD SVCD discs with PBC control or some DVD discs the menu display may appear on the TV screen after starting playback In this case select an item which you want to play back from the menu Otherwise the playback cannot go forward Refer to Playback Control PBC Function gt pg 30 or Locating A Desired Scene Using The DVD Menu pg 27 e The Library Database Navigation also enables you to search and select the desired titles pg 53 4 Press II to pause
157. play the top menu then start playback by selecting an item etc Press MENU to display the disc menu then start playback by selecting an item etc When RESUME is set to DISC RESUME Set RESUME to OFF pg 72 Press in stop mode Press TOP MENU to display the top menu then start playback by selecting an item etc Press MENU to display the disc menu then start playback by selecting an item etc 2 Press in stop mode to resume playback The unit starts playback from the resume point NOTES e DISC RESUME setting works on DVD VIDEO VCD SVCD and already finalised DVD R DVD RW video mode discs For other types of discs the function under ON setting will be applied even if RESUME is set to DISC RESUME t pg 72 e If you stop the playback of a disc for which a resume point has already been memorised the memory will be updated with the new resume point e After the unit has memorised the resume points for 30 discs remembering a new resume point will cause the unit to delete the oldest memorised point Stopping playback of a disc for which a resume point is already stored may change the order in which the points are stored This may potentially change the order in which points are deleted e When the unit memorises a resume point for a disc it also remembers audio language subtitle and angle settings e This function may not work for some Video CD SVCDs e W
158. playback e To resume normal playback press 5 Press to stop playback e When a recordable disc is played playback stops and a programme received with the unit s tuner resumes on the TV screen e When a playback only disc is played playback stops and the still image at the time you press remains on the TV screen Pressing again resumes a programme received with the unit s tuner e is pressed during playback playback stops then the disc tray opens NOTES e When the Library Database Navigation screen appears choose a thumbnail image of the desired title on the TV screen then press ENTER pg 53 e It is not possible to playback the DVD disc recorded in 96 kHz on DVD during recording or Live Memory Playback on HDD Playback Features e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DVD so that the DVD lamp lights up on the unit CABLE SAT DVD 0 9 TOP MENU ENTER Selection Keys gt gt gt gt SLOW MENU 4 4 gt 5L0W JUMP Locating A Desired Scene Using The DVD Menu DVD VCD Ut RAM Hus SVCD CD DVD VIDEO discs may have top menu and disc menu Top menu DVD discs generally have their own menus which show the disc contents These menus contain various item
159. rated below At the subsequent press the scene will jump to the 15 minutes point or 1 hour point respectively according to the selected time interval which in this case is 15 MIN Time counter 0 min 40 min 1h 15 min 15 min 30 min 45 min 1h Beginning of programme Current scene End of programme to play back once again later and start playback from a marked position Marking onto the disc when recording is helpful to locate a start point when you play back the disc later To mark positions During playback press MARK at positions you want to mark e MARK appears on the TV screen You can easily locate the marked positions using lt lt gt gt when you play back the disc To delete the marked positions While paused press lt lt to locate a marked position you want to delete then press MARK e Crossed MARK appears on the TV screen and the marked position is deleted NOTE When a monaural programme changes to a stereo programme while recording a mark signal is automatically recorded MARK 44 en LIVE MEMORY PLAYBACK Live Memory Playback DVD DVD VCD Lu ips RAM ius CD Recording playback Status Display CABLE SAT TV ID DVD gt e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to select the HDD or DVD deck This unit records pict
160. rdings and or play lists the unit automatically sets the appropriate recording mode depending on the combination of the total time of the selected recordings and or play lists to be dubbed and the available disc space 1 Load recordable disc 2 Press DUBBING to access the Dubbing Menu screen 3 Press selection keys to select HDD DVD then press ENTER 4 Press selection keys to select JUST then press ENTER 5 Perform steps 5 6 of High Speed Dubbing From HDD To DVD NOTES e Play lists are dubbed as programmes In Video mode if the selected play list includes the scenes recorded in the different transfer rate the dubbing is performed in the highest transfer rate of the scenes in the selected play list However the lower transfer rate cannot be dubbed in the higher transfer rate e The recordable time of the disc is displayed on the bar meter For details refer to About Disc Remaining Display pg 61 e During dubbing it is not possible to play back on HDD or DVD or to set timer programming Manual Dubbing From HDD To DVD It is possible to perform dubbing in the desired transfer rate 1 Load a recordable disc 2 Press DUBBING to access the Dubbing Menu screen 3 Press selection keys to select HDD DVD then press ENTER 4 Press selection keys to select MANUAL then press ENTER 5 Perform step 5 of High Speed Dubbing From HDD To DVD gt pg 60 The Manual Dubbing
161. recorded programme is deleted from a DVD R disc After finalising After a DVD R RW disc Video mode has been finalised it is possible to play back the recorded programmes video and or audio on a standard DVD video player as a DVD VIDEO disc e Edited titles are displayed as the DVD menu in video mode e It is impossible to record edit or delete the data either in video mode or in VR mode e Either in video mode or in VR mode although the disc can be played back on DVD players from other manufacturers sometimes it may not be possible to play back depending on the disc and recording conditions e It is impossible to record on CD R RW or DVD R discs used for authoring e It is impossible to record onto DVD R RW Video mode discs broadcasts that allow you to copy once The copy once programmes can only be recorded onto DVD RW discs formatted in VR mode NOTE The following may result if you play back a DVD R disc recorded on another unit e The disc does not play A mosaic pattern block noise appears on the screen e Video or audio may be dropped out e The unit stops during playback 5 CONTENTS MENU A PREV 81 Sister Princess ED2 14 11 0 55 PR12 lt HDD MN26 16 11 2002 82 GALAXY ANGLE A 04 OP 06 10 9 30 PR12 lt HDD 07 10 2002 83 GALAXY ANGLE A 04 ED 06 10 9 30 PR12 lt HDD 07 10 2002 84 FISHING WORLD OP 22 12 20 00 22 12 2002 85 FISHING WORLD ED 22 12 20 00 22 12 2002 86 RALLY
162. recorded using the start and stop times originally programmed How to check if the station being received transmits a VPS PDC signal 1 Hold down DISPLAY for about 5 seconds VPS PDC appears and blinks on the front display panel If a VPS PDC signal is detected from the station VPS PDC will stop blinking If no VPS PDC signal is detected from the station VPS PDC will blink at a slower rate 2 Press DISPLAY again to return to normal display Manual Timer Programming You can programme this unit to timer record as many as 16 programmes If you do not know the PlusCode number for the programme you wish to record use the following procedure to set your unit to timer record the programme e Make sure that the unit s built in clock is set properly e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV DVD gt AUX PROGRAMME ENTER Selection Keys AVS 1 Load a recordable disc if recording to DVD 2 Press PROGRAMME to access the programme top screen 3 Press selection keys to select CALENDAR then press ENTER e When PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMMES appears on the TV screen you need to cancel some of the reserved programmes pg 50 4 Press selection keys to select the desired date th
163. reen e Each time you press SUBTITLE the subtitle display is switched on and off 2 Press selection keys to select your desired language e To clear the subtitle selection display press ENTER NOTES e When appears on the TV screen no subtitle language is recorded e When the subtitle language won t be changed with the procedure above change the subtitle on a disc menu displayed by pressing MENU C2 4123 p ENGLISH When 3 subtitle languages are contained Audio Channel Selection DVD DVD USA Audio ips RAM VIDEO SVCD CD When watching bilingual programmes or playing discs on which you recorded bilingual or stereo programmes you can choose the desired audio channel e When SUPERIMPOSE is set to AUTO you can confirm on the TV screen the audio channel you have chosen pg 73 e Each time you press AUDIO the audio channel changes USE On Screen Display O1 For main audio of bilingual programme 4110 For sub audio of bilingual programme O q nb For stereo discs O 4 b For audio of left channel Q 4Rn b For audio of right channel NOTE It is not possible for DVD R DVD RW Video mode disc playback to switch the audio channel The audio channel is played back as set in VIDEO MODE RECORDING AUDIO setting pg 72 When you can t switch the audio channel of a bilingual programme When the unit is conne
164. roadcast appears distorted the TV screen For basic connection Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator lights off on the front display panel For component video connection Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator lights up on the front display panel Whistling howling is heard from the TV during camcorder recording e The camcorder s microphone is too close to the TV Position the camcorder so its microphone is away from the TV e The TV s volume is too high Turn the TV s volume down When scanning channels some of them are skipped over e Those channels have been designated to be skipped If you need the skipped channels restore them pg 76 The channel cannot be changed e Recording or RetroActive recording is in progress Press I to pause recording change the channel then press gt to resume recording HDD deck only Channel settings that were made manually seem to have changed disappeared e After the manual settings were made Auto Channel Set was performed Perform Clock Set pg 78 Malfunction occurs and the unit cannot be power off Reset unit by disconnecting the AC power plug from the AC outlet and connect again 84 en TROUBLESHOOTING On screen Message DISC NOT REGISTERED IN THE LIBRARY REGISTER DISC A disc that
165. rporation e This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing users only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited DIGITAL DELUXE SAFETY FIRST EN 3 The STANDBY ON 5 I button does not completely shut off mains power from the unit but switches operating current on and off shows electrical power standby and shows ON When the equipment is installed in a cabinet or a shelf make sure that it has sufficient space on all sides to allow for ventilation 10 cm or more on both sides on top and at the rear When discarding batteries environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly Failure to heed the following precautions may result in damage to the unit remote control or disc 1 DO NOT place the unit in an environment prone to extreme temperatures or humidity in direct sunlight in a dusty environment in an environment where strong magnetic fields are generated on a surface that is unstable
166. rval and resumes playback t pg 43 Jump Search JUMP Each press of the button during Live Memory Playback jumps forward for the selected time interval and resumes playback t pg 43 Jump Search It is useful when skipping over unwanted sections e Each press skips forward for approximately 30 seconds and resumes playback e Pressing repeatedly skips forward continuously as many times as pressed It is useful when watching sports programmes etc e Each press skips back for approximately 7 seconds and resumes playback e Pressing repeatedly skips back for approximately 7 seconds continuously as many times as pressed LIVE CHECK You can check for example if the programme you are recording has already finished e Pressing once displays the picture currently being recorded and the one being played back simultaneously e Pressing successively clears the Live Check window and displays only the picture currently being played back 46 En LIVE MEMORY PLAYBACK Temporary recording for Live Memory HDD deck only Simultaneous Recording and Playback This unit automatically records the channel being received within the specified range of time to the reserved space on the hard disc The time range can be set for 30 minutes 1 hour and 3 hours pg 72 NOTE Previous temporary recordings will be overwritten since the unit is always recording the channel being received Thus it is not possible to
167. s MEMO after selecting the desired title The NAVIGATION gt ORIGINAL 0026 FISH WORLD 25 12 03 THU 10 00 10 15 FROG WORLD 3143 MIN PR 3 HOBBY SELECT WITH THEN PRESS ENTER PRESS NAVIGATION TO EXIT NAVIGATION ih ENTER mene EXT O SELECT numbers of the playback order appear the index You can select up to 8 titles e When you want to correct the order move the arrow to the desired index and press MEMO The number disappears and the unit re numbers the other programmes automatically e When you want to cancel th 4 Press selection keys to select BEGINNING then press ENTER e To resume playback from the point where playback was previously stopped press selection keys to select RESUME then press ENTER e To repeat playback of a selected title press selection keys to e order press CANCEL X NAVIGATION gt ORIGINAL SELECT WITH 4 THEN PRESS ENTER SELECT HOW PLAY BACK ous PRESS NAVIGATION TO EXIT NAVIGATION ENTER LE gt EXIT SELECT select REPEAT then press ENTER 5 Press M to pause playback e To resume normal playback press 6 Press to stop playback NAVIGATION 53 Edit Original Information E E Ed EJ ES e Load a DVD disc to modify e Turn on the TV and select the AV mode e Slide the TV CAB
168. s in progressive mode Group Title Number Display B Track Chapter Number Display D Remaining Time Elapsed Time Indicator pg 29 38 Lights when remaining time of HDD DVD RAM DVD R and DVD RW discs is displayed and lights out when elapsed time is displayed The right 6 digits of the Multi Display D indicate elapsed or remaining time of each track No display Indicates elapsed time of the disc Displayed Indicates remaining time of the disc Remaining Time Elapsed Time Display t pg 29 38 Multi Display Displays clock received channel elapsed time and remaining time Also displays status of the unit NO DISC OPEN CLOSE READING 14 en INDEX Remote Control CABLE SAT CLOSE TVICBLISAT 9 9 1 __ LIVE DUBBING EDIT PROGRAMME _ PREVIOUS NEXT SLOW PLAY SELECT SLOW 2 Sis PROGRESSIVE AUDIO SUBTITLE ANGLE 80 i Open Close Button 4 t pg 9 TV AV VIDEO Button c pg 38 41 HDD Button pg 40 This button will not function during navigation mode or set up mode Number Keys vs pg 37 40 Auxiliary Button AUX t pg 49 74 Q Cancel Button CANCEL X pg 35 Live Button LIVE pg 45 Dubbing Button DUBBING t pg 60 TV Button pg 68 Top Menu Button TOP MENU
169. s may stop or cannot be performed even if there is enough available capacity remaining on the disc e It is not possible to record both DVD and HDD simultaneously Recording Mode MPEG 2 format is used as recording format As a guide for picture quality the bps unit is used to represent how much data can be recorded per second The larger this value is the better the picture quality becomes but more capacity is required for the recording Select XP or SP for programmes where quick movement occurs Such as sports programmes and LP or EP for talk shows etc with relatively less movement The recording modes for a 4 7 GB disc are set as follows Recording Recording amount Maximum recording mode approx time approx XP 10 Mbps 1 hour SP 5 Mbps 2 hours LP 2 5 Mbps 4 hours EP 1 6 Mbps 6 hours FR60 FR360 The amount varies 1 6 hours t pg 39 depending on the FR420 selected time 7 hours FR480 8 hours e For details FR mode refer to Free Rate Function rs pg 39 38 BASIC OPERATIONS DVD DECK Recording Features m m VIDEO CD e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DVD so that the DVD lamp lights up on the unit REC CABLE SAT Hoo TV AV VIDEO Te dlo e DVD
170. s selection keys to select TUNER then press V 4 Press selection keys to select MANUAL CH SET then press ENTER The Manual Channel Set screen appears 5 Press selection keys to select EDIT then press ENTER 6 Press selection keys to select a blank position in which you want to store a channel then press ENTER The Confirmation screen appears 7 Press selection keys to select BAND then press ENTER Example To store in position 6 INITIAL SET UP gt MANUAL CH SET PR CH 10 Po 26 BBC 0 s NN NENNEN LN nemen The programme currently received on the selected channel position appears behind the confirmation screen 8 Press selection keys to change the band between CH regular and CC cable then press ENTER 9 Press selection keys to select CH then press ENTER 1O Press selection keys to input the channel number you want to store e To enter the registered station name rs pg 89 press selection keys to select ID then press ENTER Press selection keys e For fine tuning adjustment press selection keys to select FINE then press ENTER Press A V to perform fine tuning e When L 2 SELECT is set to VIDEO S VIDEO SAT VIDEO or SAT S VIDEO the DECODER setting cannot be changed pg 67 11 Press ENTER to enter new channel information The Confirmation screen appears 12 Press SET UP or RETURN to close
171. s such as titles of a movie names of songs or artist information You can locate a desired scene by using the top menu displayed on the TV screen Press TOP MENU to access the top menu Disc menu Disc menus include playback data angle menu subtitle menu etc specific to each title Press MENU to access the disc menu 1 Press TOP MENU or MENU to access the DVD menu 2 Press selection keys to select a desired title then press ENTER Playback starts e It may be possible to select the desired item using the number keys depending onthe Example menu display NOTE When appears on the TV screen in step 1 the disc does not have a top menu or disc menu BASIC OPERATIONS ON DVD DECK ey 27 Locating The Start Point Of The Item Or Skip The Item DVD DVD Audio AR ARB ADS Press I lt or gt gt during playback e Pressing gt gt locates the start point or marked points of the item or skips the item in the forward direction then resumes playback e Pressing lt locates the start point or marked points of the item or skips the item in the reverse direction then resumes playback Current playback point ON Previous Drama Next Movie programme or programme or or Scene 3 or Scene 5 Scene 2 Chapter 3 Scene 4 Chapter 5 Chapter 2 or Chapter 4 or or Track 3 or Track 5 Track 2 Track 4 Reverse a 14 m Forward e marked points t pg 29 Variable Speed Searc
172. satellite broadcast with the TV set to its AV mode even if the unit is turned off When the unit is in Stop mode or recording press TV AV VIDEO on the remote control to turn off the VIDEO lamp on the unit e If you turn on the unit when the satellite receiver s power is off nothing appears on the TV screen In this case turn on the satellite receiver or set the TV to its TV mode or press TV AV VIDEO on the remote control to set the unit to the AV mode Connecting To A Dolby Digital Decoder Or An Amplifier With Built in DTS These instructions enable you to connect your unit to a Dolby Digital Decoder or an amplifier with built in DTS Dolby Digital Decoder or E amplifier with built in DTS To DIGITAL AUDIO input Coaxial cable not supplied 4 To DIGITAL AUDIO OUT COAXIAL Optical cable not supplied To DIGITAL AUDIO OUT OPTICAL Rear of unit Note for connection Remove the protection cap from the optical cable 1 Connect the unit and Dolby Digital Decoder or an amplifier with built in DTS using either an optional optical cable or an optional coaxial cable NOTES e For Dolby Digital sound set DIGITAL AUDIO OUT to DOLBY DIGITAL PCM s pg 71 e For DTS sound set DIGITAL AUDIO OUT to STREAM PCM pg 71 CAUTIONS e This unit has a dynamic range of more than 110 dB with r
173. sc is indicated Disc Status Indicator When a disc is running the disc marks rotate During High Speed Search Rotate faster than normal playback During Slow Motion Rotate slower than normal playback While recording Inner red ring lights in the same way as normal playback During Instant Timer Recording ITR inner red ring slowly blinks While paused Disc marks blink when either recording or playing back While stopped Disc marks all light While resume stopped Disc marks all blink While the disc tray opened Disc marks all light out No disc on the disc tray Disc marks all light out Q VR Mode Indicator VR pg 79 Lights when a DVD RW disc is formatted in VR mode Recording Mode Indicator XP SP LP EP FR pg 37 Blinks when recording mode is being set While is blinking the left digits of the Multi Display indicate setting values ranging from 60 to 480 After the value has been set only FR lights VPS PDC Recording Indicator t pg 48 Lights when VPS PDC recording function is activated Group Title Indicator GRP TITLE GRP or TITLE lights depending on a disc loaded while the left 2 digits of the Multi Display indicate the numbers explained below GRP Total number of groups or group number being played back are displayed on the Multi Display TITLE Total number of titles or title number being played back are displayed on the Multi Display Track Chap
174. screen appears Press selection keys to select REC MODE then press ENTER Press selection keys to select the desired option then press ENTER 7 Press selection keys to select CONFIRM then press ENTER 8 Press selection keys to select EXECUTE or AUTO PWR OFF then press ENTER to start dubbing e If AUTO PWR OFF is selected the unit will turned off after dubbing is completed NOTES In Video mode if the selected play list includes the scenes recorded in the different transfer rate the dubbing is performed in the highest transfer rate of the scenes in the selected play list However the lower transfer rate cannot be dubbed in the higher transfer rate e The recordable time of the disc is displayed on the bar meter For details refer to About Disc Remaining Display pg 61 e During dubbing it is not possible to play back on HDD or DVD or to set timer programming Original Dubbing From DVD To HDD It is possible to dub the original recordings on DVD discs to the HDD deck 1 Load a disc you want to dub 2 Press DUBBING to access the Dubbing Menu screen 3 Press selection keys to select DVD HDD then press ENTER 4 Press selection keys to select indexes small pictures of desired original recordings and or play lists then press MARK After selecting all indexes you want to dub press ENTER e You can select up to 8 original recordings and or play lists 5 Press
175. screpancy of several seconds between the scene you intend to edit and the scene which is actually edited EDITING EDIT ENTER lt ORIGINAL 14 PLAYLIST 0 EXT lt SELECT EDITING gt MODIFY CHAPTER CHAPTER 03 10 0 07 01 01 00 00 00 02 00 05 30 03 00 07 00 04 00 30 00 Dosen Jf 56 en NAVIGATION Eit Play List Information DVD DVD DVD VCD Audio RAM uu Lus Ele e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to choose the corresponding deck e Load a DVD disc to modify ATTENTION e It is not possible to modify discs recorded on DVD units from other manufacturers e You cannot perform timer recording during editing the index by pressing EDIT Press EDIT to clear the editing screen before performing timer recording CABLE SAT on TV DVD HDD DVD O 99090 o GG CANCEL EDIT ENTER co NAVIGATION G gt Keys ctl maa rz gt gt mnl lt gt gt gt mL ecce Play List It is a collection of the scenes A play list can be freely edited and played back without ever changing any original recording data Using the random access of a disc which allows video data to be instantly read no matter where it is on th
176. se HU Hungarian PS Pashto Pushto Volapuk HY Armenian PT Portuguese WO Wolof Interlingua QU Quechua XH Xhosa IE Interlingue RM Rhaeto Romance YO Yoruba ZU Zulu Country Code List for Parental Lock APPENDIX cu 87 AD Andorra CK Cook Islands GN Guinea AE United Arab Emirates CL Chile GP Guadeloupe AF Afghanistan CM Cameroon GQ Equatorial Guinea AG Antigua and Barbuda CN China GR Greece Anguilla Colombia GS South Georgia and the South Sandwich Islands AL Albania CR Costa Rica GT Guatemala AM Armenia CU Cuba GU Guam AN Netherlands Antilles CV Cape Verde GW Guinea Bissau AO Angola CX Christmas Island GY Guyana AQ Antarctica CY Cyprus HK Hong Kong AR Argentina CZ Czech Republic HM Heard Island and McDonald Islands AS American Samoa DE Germany HN Honduras AT Austria DJ Djibouti HR Croatia AU Australia DK Denmark HT Haiti AW Aruba DM Dominica HU Hungary AZ Azerbaijan DO Dominican Republic ID Indonesia BA Bosnia and Herzegovina DZ Algeria Ireland BB Barbados EC Ecuador IL Israel BD Bangladesh EE Estonia IN India BE Belgium EG Egypt IO British Indian Ocean Territory BF Burkina Faso EH Western Sahara IQ Iraq BG Bulgaria ER Eritrea IR Iran Islamic Republic of BH Bahrain ES Spain IS Iceland BI Burundi ET Ethiopia IT Italy BJ Benin FI Finland JM Jam
177. selection keys to select EXECUTE or AUTO PWR OFF then press ENTER to start dubbing e If AUTO PWR OFF is selected the unit will turned off after dubbing is completed NOTES e t is not possible to dub play lists on DVD discs e It is not possible to dub pre recorded DVD VIDEO discs e It is not possible to dub Video CDs SVCDs or Audio CDs EDITING 61 About Disc Remaining Display When dubbing from HDD to DVD the unit displays the time information for dubbing by bar meter By comparing the disc remaining time and the necessary time for dubbing of the selected items it is possible to check if the dubbing can be performed completely or not When performing the High Speed Dubbing Capacity of a disc Remaining capacity 21 Dark green Length of already recorded item Light green Length of selected item Yellow Length of the item now being selected by arrow Red Excess over the capacity When performing the Just Dubbing TOTAL 105MIN e The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate e The total time of a loaded disc is displayed on the right of the bar meter When performing the Manual Dubbing MAX FR240 e The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate e The available highest transfer rate is displayed on the right of the bar meter NOTE The bar meter
178. starts broadcasting in your area Auto Channel Set 1 Press SET UP to access the Main Menu screen 2 Press selection keys to select INITIAL SET UP then press V 3 Press selection keys to select TUNER SET then press V 4 Press selection keys to select AUTO CH SET then press TUNER SET CLOCK SET ENTER AUTO CH SET MANUAL CH SET connected the unit to a GUIDE PROG SET TV offering T V Link via 1 a fully wired 21 pin 9 v SETUP Om SELECT WITH 4 THEN PRESS ENTER Dy PRESS SET UP TO EXIT O INITIAL SET UP SCART cable pg 18 the unit automatically performs the Preset Download and the T V LINK screen will appear pg 20 AUTO SET The Auto Set screen appears and remains on screen while the unit searches for receivable stations exit sue INITIAL SET UP gt AUTO SET CANCEL SETUP CU SELECT WITH 4 THEN PRESS ENTER PRESS SET UP TO EXIT sugT SUBSIDIARY SETTINGS 75 5 View the Confirmation screen AUTO SET COMPLETED or SCAN COMPLETED is displayed on the TV screen Select OK 6 Press SET UP to complete the setting e Using the Confirmation screen you can skip or add channel positions enter station names and perform other operations Refer to pages 76 77 for the procedures e Depending on reception conditions the stations may not be stored in order and
179. t EXIT then press ENTER to complete timer programming To programme another timer press selection keys to select CONTINUE then press ENTER If PROGRAMME OVERLAPPED appears on the TV screen delete or modify the programmes NOTES e There may be cases that the VIDEO Plus Timer Programming function prolongs the stop time of the programming e When two successive programmes are recorded on a DVD RW disc with the VIDEO Plus Timer Programming function the beginning of the second one may be left off the recording e f the copy limited programme is received during timer recording the unit enters Record Pause mode Recording starts again if it is switched to a recordable broadcast during the time you programmed IMPORTANT If you have moved to a different area or if a broadcasting station s channel number has been changed the wrong channel number will be displayed on the VIDEO Plus programme Screen in step 7 When this happens set the correct Guide Programme number for that station pg 74 VIDEO Plus System Setup Satellite Receiver Users To timer record a satellite broadcast using the VIDEO Plus system Perform Satellite Receiver Control Setting pg 24 Perform VIDEO Plus Timer Programming pg 47 Leave the satellite receiver s power on 48 TIMER RECORDING Weekly Daily Recording VPS PDC Recording
180. t Bilsdale West Moor 33 Chatton sh Pontop Pike 58 Angus 57 Black Hill 40 Sandale 22 Caldbeck Creigkelly 31 Darvel we 33 Durris 22 Eitshal 33 Keelylang Hill 40 Knock More 33 Rosemarkie 2 39 Rumster Forest Selkirk 55 Wales Blaenplwyf 31 Carmel Llanddona a Moel y Parc 52 Presely hene 46 Wenvoe 44 Northern Ireland Brougher Mountain 22 tdi 31 Limavady 55 ITV CH5 34 28 32 56 62 59 65 48 26 29 23 35 45 49 42 64 61 54 68 63 60 5 46 43 50 37 34 28 32 56 27 24 21 48 26 23 29 85 28 25 32 67 26 23 29 46 43 50 26 23 29 45 49 42 67 27 24 21 62 59 65 52 27 24 2 56 63 60 5 63 60 5 45 49 42 40 43 50 37 51 41 47 28 25 32 27 24 21 37 62 59 65 Repeat Playback 32 Adjusting The Picture Quality 34 Angle Selection 29 Audio Channel Selection 30 Audio Language Sound Selection 30 Auto Channel Set
181. ter Indicator TRK CHAP or CHAP lights depending on a disc loaded while the 3rd and 4th digits from the left of the Multi Display B indicate the numbers explained below Total number of tracks or track number being played back are displayed on the Multi Display CHAP Chapter number being played back are displayed on the Multi Display CHAP 3D LPCM RND 221 Simulated Surround Effect Indicator 3D t pg 34 Lights when a simulated surround effect is set to 3D ON on the on screen bar Q Linear PCM Indicator LPCM Lights when XP MODE REC AUDIO is set to LINEAR PCM pg 72 for recording with HDD DVD RAM DVD R and DVD RW discs and when Linear PCM audio is played Random Programme Playback Mode Indicator RND PRGM pg 35 RND Lights when Random Playback mode is set Lights when Programme Playback mode is set Repeat Mode Indicator 3 1 A B pg 32 Select Repeat Playback mode on the on screen bar Whole disc is played back repeatedly C1 A single title chapter track is played back repeatedly The selected part is played back repeatedly No display Repeat Playback mode is off Video Output Indicator 0 pg 73 No display Indicates that interlace mode is engaged B Indicates that progressive mode is engaged Example lights when video output mode i
182. tering all characters press selection keys to select OK then press ENTER 6 Press RETURN to return to the Manual Channel Set screen e Repeat steps 2 5 as necessary 7 Press SET UP or RETURN to close the Confirmation screen NOTE The characters available for the station name ID are A Z 0 9 space maximum of 4 1 Perform steps 1 5 of Manual Channel Set pg 76 2 Press selection keys to select the channel you want to fine tune then press ENTER The Confirmation screen appears 3 Press selection keys to select FINE then press ENTER 4 Press selection keys until the picture appears in its best quality then press ENTER e Repeat steps 2 4 as necessary 5 Press RETURN to return to the Manual Channel Set screen Press SET UP or RETURN to close the Confirmation screen 78 SUBSIDIARY SETTINGS Clock Set IMPORTANT If you performed Auto Set Up rs pg 19 or Preset Download pg 20 without ever having set the clock previously the unit s built in clock is also set automatically Perform the following steps only if Auto Clock Set has not been performed correctly by Auto Set Up or Preset Download OR you want to change Just Clock setting See Just Clock in the right column e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD TV DVD _ CABLE SAT
183. that in the receiving area Set the correct channel position for the receiving broadcast ce pg 74 Recording cannot made No disc or a disc not being compatible with the unit is loaded Load a recordable disc on the unit gt pg 6 The disc loaded is not formatted Format the disc pg 79 A finalised DVD R disc is loaded Recording cannot be made on finalised discs Load a recordable disc on the unit The disc is full or does not have enough space for the title to be recorded Clear unnecessary titles on the disc or load a blank disc t pg 54 e The DVD RAM disc loaded has had its protect tab slid to the protect position Release the protect tab pg 9 e Recording HDD Deck broadcasts cannot recorded L 1 L 2 or F 1 has been selected as the input mode Set to the desired channel Camcorder recording is not possible e The camcorder has not been properly connected Confirm that the camcorder is properly connected e The input mode is not correct Set input mode to F 1 gt pg 64 Timer Recording Timer programming cannot made e Date and time is not correct Set date and time correctly pg 78 e Timer recording is in progress Timer programming can t be performed while a timer recording is in progress Wait until it finishes Timer programming recording does not start e Date and t
184. the Confirmation screen e To change positions see Change Station Channel Position c pg 76 e If you wish to set station names other than the ones registered in your unit see Set Stations B rs pg 77 DECODER RETURN SELECT WITH THEN PRESS ENTER PRESS SET UP TO EXIT SETUP ENTER SELECT ATTENTION Guide Programme numbers are not set when channels are stored manually pg 74 VIDEO Plus System Setup 1 Perform steps 1 5 of Manual Channel Set pg 76 2 Press selection keys to select the channel you want to delete 3 Press to delete a channel The channel next to the cancelled one moves up one line e Repeat steps 2 3 as necessary 4 Press SET UP or RETURN to close the Confirmation screen Change Station Channel Position 1 Perform steps 1 4 of Manual Channel Set pg 76 2 Press selection keys to select MOVE then press ENTER 3 Press selection keys to select the channel you want to move then press ENTER 4 Press selection keys to select the new channel position then press ENTER Example If you moved the station in position 4 to position 2 the stations originally in positions 2 and 3 each move down one space INITIAL SET UP gt MANUAL CH SET PR cH D LEME EEKE ___ 70 3 i 05 _ EDIT RETURN SE INITIAL
185. the unit starts playback e f you enter a wrong password ENTRY ERROR appears on the TV screen Enter the correct password e If you have successively entered wrong password three times ENTRY ERROR CAN NOT CHANGE PASSWORD appears on the TV screen In such a case press ENTER The disc will stop Then play back the disc again and try the procedure again from step 1 NOTE If you forget your password enter 8888 in step 3 Basic Recording m m VIDEO SVCD e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD ATTENTION It is not possible to record programmes on a DVD R disc which has already been finalised DVD lamp CABLE SAT TV DVD olo gt 3j DVD DOG 0 9 NOE IG PR ENTER VG tJ c gt gt gt e Doo 1 Load recordable disc e For details refer to Placing A Disc gt pg 9 2 Press DVD so that the DVD lamp lights up on the unit Press PR or the number keys to select the channel you wish to record 4 Press REC MODE repeatedly to select the recording mode then press ENTER e Each time you press REC MODE the recording mode changes as follows SP
186. timer on the satellite receiver e Slide the TV CABLE SAT DVD switch to DVD 1 Press HDD to choose the recording deck 2 Set L 2 SELECT to SAT VIDEO or SAT S VIDEO t pg 67 e Also refer to IMPORTANT on page 70 3 Press REC MODE repeatedly to set the recording mode 4 Press and hold SATO for about 2 seconds to engage the Automatic Satellite Programme Recording mode appears on the front display panel NOTES e To disengage the Automatic Satellite Programme Recording mode press e If the unit s power is off it is not possible to engage the Automatic Satellite Programme Recording mode e In step 4 if blinks quickly on the front display panel even though your satellite receiver s power is off Automatic Satellite Programme Recording will not work properly with that satellite receiver If this is the case perform Manual Timer Programming t pg 49 to timer record a satellite programme Some satellite receivers output signals even if the power is off Automatic Satellite Programme Recording is not possible with those satellite receivers SATO blinks on the front display panel while Automatic Satellite Programme Recording is in progress e For timer programming of the satellite receiver refer to the instruction manual of the satellite receiver e Automatic Satellite Programme Recording is not possible if your satellite receiver does not have a timer
187. tion for reverse direction cannot be performed with Video CD SVCD discs Skip Search DVD DVD Audio FA kd E3 During playback press x e Each press initiates an approximately 30 second period of fast motion playback Normal playback resumes automatically Jump Search DVD DVD Mir ILI E Ed E E BARE You can locate a scene ahead or behind the current one by jumping scenes according to selected time intervals gt pg 72 during playback or Live Memory Playback Press JUMP or JUMP e To advance forward or back press JUMP or JUMP repeatedly within 5 seconds of each press to continue jump e Depending on the time from where you want to start jump search the first press of JUMP or JUMP will not necessarily lead to a jump of the selected time interval The first press will lead to a jump to the nearest quarter points of an hour 15 min 30 min 45 min 00 min The subsequent jumps will then be in accordance to the selected time interval e When you cannot advance any further beginning or end of programme reached the message UNABLE TO GO BACK ANY MORE appears on the screen and the on air screen resumes In such a case press a a lt lt or Example Playback search when jump interval is set to 15 MIN jumps Taking for instance you want to start jump search 40 minutes after the beginning of the programme Pressing JUMP or JUMP will result in a jump to the scene at the 30 min
188. tles recorded around the point may not appear e When the end of the item is reached before the end point is set the on screen bar disappears from the TV screen In such a case repeat the procedure from step 1 e The point B must be set at least 3 seconds after the point A e When playing back a DVD A B Repeat Playback is possible only within the same title cannot be selected during Programme and Random Playback e A B J cannot be selected while stopped Locating The Beginning Of A Desired Selection RAM VIDEO cD You can locate the beginning of a title chapter group or track During playback or while stopped 1 Press ON SCREEN twice to access the on screen bar 2 Press selection keys to select then press ENTER 3 Press selection keys to select the desired item then press ENTER e Skip this step for Video CD SVCD and Audio CD For DVD RAM RW R DVD VIDEO TITLE SEARCH or CHAPTER SEARCH is selectable TITLE SEARCH is selectable only while stopped For JPEG MP3 GROUP SEARCH or TRACK SEARCH is selectable For Video CD SVCD Audio CD TRACK is selectable NOTE Settings that are selectable during playback and stop mode differ depending on the type of disc and search used GROUP 99 CHAPTER 99 EACH 179 59 5 CINEMA 9 Om tien L3 7 SEARCH 4 Press the number keys to enter the desired item number
189. to Guide Programme Number Set If you have connected the unit to your TV via a 21 SCART cable pg 18 the unit will automatically perform Preset Download instead of the Auto Set Up in step 2 on page 19 After downloading the unit sets the clock and Guide Programme numbers automatically e Slide the TV CABLE SAT DVD switch to DVD ATTENTION You can use this function only with a TV offering T V Link etc Be sure to use a fully wired 21 pin SCART cable Compatible with TVs offering T V Link EasyLink Megalogic SMARTLINK Q Link or DATA LOGIC via a fully wired 21 pin SCART cable The degree of compatibility and available functions may differ by system CABLE SAT TV DVD gt ENTER Selection Keys 4 1 Press on the unit or DVD on the remote control to turn on the unit The AUTO SET T V LINK display appears on the TV screen 2 Press selection keys to select T V LINK and press ENTER The T V LINK screen will appear e When T V LINK is completed SCAN COMPLETED appears on the TV screen Select SET UP Om SELECT WITH THEN PRESS ENTER RIY PRESS SET UP TO EXIT INITIAL SET UP gt AUTO CH SET p EXIT SELECT INITIAL SET UP gt T V LINK T V LINK PLEASE WAIT C CANCEL SETUP ENTER SELECT WITH 4 THEN PRESS ENTER PRESS SET UP TO EXIT EXT
190. to a stereo amplifier receiver or TV set or in case you want to record the audio from a DVD VIDEO disc to a Mini Disc etc DOLBY SURROUND Select this when listening to multichannel surround audio with the unit s AUDIO OUT connectors connected to an amplifier receiver with a built in surround decoder or a surround decoder D RANGE CONTROL NORMAL WIDE RANGE TV MODE The dynamic range the difference between the loudest sound and the quietest one can be compressed during playback of a programme encoded in Dolby Digital format This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume NORMAL Normally select this setting to activate this function WIDE RANGE Select this to deactivate this function when you enjoy wide dynamic range programme TV MODE Select this when you hear the sound through the TV s speaker s NOTES e This function has no effect on programmes other than those recorded in Dolby Digital format e This function does not work when Simulated Surround Effect is activated t pg 34 e The effect of NORMAL and WIDE RANGE may not be different depending on discs OUTPUT LEVEL STANDARD LOW You can lower the output level of analogue audio to accommodate the unit to the connected A V equipment STANDARD Normally select this setting LOW The output level of analogue audio is lowered 72 SUBSIDIARY SETTINGS
191. to record the sound of both SOUND 1 and SOUND 2 Note that this selection is not available when the source programme is recorded in 16BIT 48 kHz mode To DV IN DV cable VC VDV 204U not supplied s e m DV connector 9 Press selection keys to select 2 E99 then press ENTER The dubbing starts e Playback on the external DV equipment and recording on the unit should start simultaneously e To pause dubbing press selection keys to select __22 then press ENTER Both the unit and the external DV equipment pause dubbing Pressing on the unit also works the same way 1O Press selection keys to select amp 9 99 then press ENTER Then press lil The DV equipment stops 11 Press selection keys to select m then press ENTER 12 Press twice on the remote control to stop dubbing e Both the unit and the external DV equipment stop dubbing NOTES e Dubbing copyright guarded programmes is not possible e Original DV information such as the recording date and time are not recorded e The superimposed indication during the operation or dubbing is not recorded e If the dubbing is paused while the channel is set to DV you cannot switch channels When you dub from DV equipment other than a camcorder Perform step 1 to 4 Locate the point from where you want to start dubbing
192. tored in the unit s memory by using the PR button s e If station names ID gt pg 89 have also been stored in the units memory the station name will be displayed at the top right corner of the TV screen for about 5 seconds when the unit is tuned to a different station e If you want to set the tuner manually such as to add or skip channels to change channel positions or to set or change station names see pages 76 77 If Auto Channel Set has succeeded but Auto Clock Set has not 1 channel position is displayed OR If both Auto Channel Set and Auto Clock Set have failed is displayed 1 Turn on the TV and select its AV mode then make sure that all necessary stations have been stored in the unit s memory by using the PR button s e If station names ID gt pg 89 have also been stored in the unit s memory the station name will be displayed at the top right corner of the TV screen for about 5 seconds when the unit is tuned to a different station e If you want to set the tuner manually such as to add or skip channels to change channel positions or to set or change station names see pages 76 77 2 Perform Clock Set rs pg 78 ATTENTION After making sure the cables are connected properly turn off the units power once then turn the unit s power back on again Perform Auto Set Up rs pg 19 or Preset Download t pg 20 again IMPO
193. ures onto the hard disc and DVD RAM disc instead of video tapes then plays back the pictures recorded on the disc This makes it possible to achieve high speed writing and read out that has not been possible with conventional VCRs enabling recording and playback simultaneously LIVE NAVIGATION Press NAVIGATION to display Library Database Navigation menu then choose a programme to play back pg 52 High speed spin Recording High speed writing Playback High speed read out It is called Live Memory Playback to start playback of the programme being recorded with a time lag between a recording point and a playback point as shown in the figure below Current playback point Live Memory Playback Current recording position Recording start point Recording point Playback gt Recording continues gt continues 0 30 min 1 hour Currently elapsed recording time Not only can this unit play back programme previously recorded while recording or timer recording another programme but the unit also allows you to play back from the beginning of a programme while continuing to record the same programme Ca Cn DR s ON SCREEN Live Memory Playback status can be checked by pressing ON SCREEN to display the bar meter on the superimpose display The current status is OO superimposed on t
194. utes point or 45 minutes point respectively as illustrated below At the subsequent press the scene will jump to the 15 minutes point or 1 hour point respectively according to the selected time interval which in this case is 15 MIN Time counter 0 min 40 min 15 min 30 min 45 min 1h 1h 15 min Beginning of programme Current scene NOTE Jump search cannot be performed with finalised DVD R DVD RW video mode discs End of programme DVD DVD Audio E Ed E31 E2 E3 It is possible to memorise the position where you stop playback and resume playback from that position e Be sure to set RESUME to ON or DISC RESUME pg 72 e Resume function always works for DVD RAM regardless of the setting of RESUME 1 Press during playback to memorise resume point e The unit enters Resume Stop mode and memorises the position where you have stopped playback as a resume point The inside of the disc status indicator on the front display panel blinks while memorising e The unit retains a memory of the resume points of the last 30 discs played back even though they have been ejected if RESUME is set to DISC RESUME t amp pg 72 e To clear the resume points The inside of the disc status indicator stops blinking and lights When RESUME is set to ON Press D to turn off the unit Press to take out the disc Press in stop mode Press TOP MENU to dis
195. with Y C signals set to S VIDEO You can obtain high quality picture For connection be sure to use a 21 pin SCART cable that is compatible with the Y C signal Select SAT VIDEO or SAT S VIDEO to view a satellite programme with the TV set while the unit is turned off rs pg 70 SAT VIDEO If a connected satellite receivers output is compatible only with regular video signals set to VIDEO SAT S VIDEO If a connected satellite receiver s output is compatible with Y C signals set to SAT S VIDEO You can obtain a high quality S VHS picture For connection be sure to use a 21 SCART cable that is compatible with the Y C signal DECODER To use a decoder connected to the L 2 IN DECODER connector This setting is not available in the U K although it is selectable NOTES e f you have a satellite receiver connected to the L 2 IN DECODER connector be sure to set L 2 SELECT back to appropriate mode after editing e f you are not connecting a satellite receiver to the L 2 IN DECODER connector leave L 2 SELECT set to VIDEO e When L 2 SELECT is set to SAT VIDEO and S VIDEO SAT appears on the TV screen or front display panel instead of L 2 e If L 1 OUTPUT is set to SCART S VIDEO it is not possible to set L 2 SELECT to DECODER or SAT VIDEO If L 1 OUTPUT is set to SCART it is not possib
196. y MH Marshall Islands PT Portugal TT Trinidad and Tobago ML Mali PW Palau TV Tuvalu MM Myanmar PY Paraguay TW Taiwan MN Mongolia QA Qatar TZ Tanzania United Republic of MO Macau RE R union UA Ukraine MP Northern Mariana Islands RO Romania UG Uganda MQ Martinique RU Russian Federation UM United States Minor Outlying Islands MR Mauritania RW Rwanda US United States MS Montserrat SA Saudi Arabia UY Uruguay MT Malta SB Solomon Islands UZ Uzbekistan MU Mauritius SC Seychelles VA Vatican City State Holy See MV Maldives SD Sudan VC Saint Vincent and the Grenadines MW Malawi SE Sweden VE Venezuela MX Mexico SG Singapore VG Virgin Islands British MY Malaysia SH Saint Helena Virgin Islands U S MZ Mozambique SI Slovenia VN Viet Nam NA Namibia SJ Svalbard and Jan Mayen VU Vanuatu NC New Caledonia SK Slovakia WF Wallis and Futuna Islands NE Niger SL Sierra Leone WS Samoa NF Norfolk Island SM San Marino YE Yemen NG Nigeria SN Senegal Mayotte NI Nicaragua SO Somalia YU Yugoslavia NL Netherlands SR Suriname ZA South Africa NO Norway ST Sao Tome and Principe ZM Zambia NP Nepal SV EI Salvador ZR Zaire NR Nauru SY Syrian Arab Republic ZW Zimbabwe TV Station And ID List APPENDIX cu 89 The ID abbreviation is what is shown on screen in lieu of the station name The ID abbreviation is listed in the Confirmation screen and is displayed on the TV screen when the unit is tuned to a differe
197. y on the disc tray or place any heavy objects on it Discs without cartridges Disc tray Place the disc on the disc tray with the label side facing up Since disc size changes depending on the disc to be played back be sure to correctly align the disc with the grooves for its size If the disc is not in its groove it may be scratched or otherwise damaged To insert an 8 cm disc place it according to the inner groove DVD RAM discs contained in cartridges Double sided discs Remove the disc from the cartridge Align the disc with the grooves on the disc tray as shown in the illustration and insert with the side you wish to play back or record facing down If you insert the disc with Side A facing down programmes are recorded on the side A Single sided discs Remove the disc from the cartridge Align the disc with the grooves on the disc tray as shown in the illustration and insert with the label side facing up 10 en DISC INFORMATION Care And Handling Of Discs How to handle discs When handling a disc do not touch the surface of the disc Since discs are made of plastic they are easily damaged If a disc gets dirty dusty scratched or warped the images and sound will not be picked up correctly and such a disc may cause the unit to malfunction Label side Do not damage the label side stick paper to or use any adhesives on its surface Recording side Make sure that discs are not scratched or dirty

Download Pdf Manuals

image

Related Search

Related Contents

H720 Wireless 3G 4G Dual SIM Router User Manual  Samsung Samsung Champ Nuovo DUOS Uživatelská přiručka    Jwin JX-CD290 User's Manual  Mode d`emploi Fers Vapeur Ultimate Auto Clean  Histoire des Arts au Musée du Textile  XTC-160 Manual Del Usuario  parcours de formation et autoconstruction professionnelle des  City of Bossier , Bossier City, LA  取扱説明書 ご使用前に必ず、ご確認 ご使用前に必ず、ご確認 ご使用前  

Copyright © All rights reserved.
Failed to retrieve file