Canon EOS-3 Digital Camera User Manual
Contents
1. REMOTE CONTROL OPERATION POWER button Press to turn on off the TV CHANNEL button Press to adjust the channel up or down VOLUME button Press to adjust the sound level PC button Press to switch on your PC signal SLEEP button Press to set the LCD TV to turn off Itself within a certain time MENU button Press repeatedly to display main menu and exit OSD function V CHIP button Press this button to setup parental control PIP POP button Not applicable Enfocus Software Customer Support DISPLAY button Press to Display channel number on MUTE button Press to eliminate or restore the LCD NUMBER button Press to select TV channels R button Press to display the previously selected TV channel TV VIDEO button Select your video input source MTS SAP button Press to select sound mode if available CAPTION button Press to activate closed Caption SIZE SWAP button Not applicable INSTALLING LCD TV ON THE WALL Before you can install your LCD TV on the wall you MUST first remove the base using the steps below 1 Place the set facing down on a flat surface with a protective sheet or cloth the TV 2 Remove two screws from the base grasp the base and pull it out When installing the LCD TV on the wall please consult a professional technician for proper installing The manufacture accepts no liability for installations not performed by professional te2. MAGNAVOX SMART VERY SMART Owner s Manual ISMF400T 37 Series LCD TY HELP CALL us MAGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH ANY QUESTIONS ABOUT YOUR NEW PRODUCT WE CAN GUIDE YOU THROUGH CONNECTIONS FIRST TIME SETUP AND ANY OF THE FEATURES WE WANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT 1 800 705 2000 OR VISIT US ON THE WEB AT WWW USASUPPORT MAGNAVOX COM Important Return your Warranty Registration Card within 10 days RETURN YOUR PRODUCT REGISTRATION CARD TODAY TO GET THE VERY MOST FROM YOUR PURCHASE Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below so don t miss out Complete and return your Product Registration Card at once to ensure Proof of Purchase Returning the enclosed card guarantees that your date of purchase will be on file so no additional paperwork will be required from you to obtain warranty service MAGNAVOX Congratulations on your purchase and welcome to the family Dear MAGNAVOX product owner Thank you for your confidence in MAGNAVOX You ve selected one of the best built best backed products available today We ll do everything in our power to keep you happy with your purchase for many years to come As a member of the MAGNAVOX family you re entitled to protection by one of the most comprehens
3. Closed Caption OFF Reset To Default Note Air Cable Auto Scan Current Program Sleep Timer options can only display on TV Source TV CHANNEL INSTALLATION Air Cable 1 Press MENU key to open OSD menu 2 Press gt or lt key to select TV Setup option 3 Press or v key to select AIR CATV option 4 Press gt or lt key to select the automatic search system that your TV need there are four options CATV Community Antenna Television AIR Over the Air HRC Harmonically Related Carrier IRC Incrementally Related Carrier 5 Press MENU key to exit AIR CATV menu or press or V key to adjust other options Note Please run the auto scan function to setup the TV for the broadcast or cable channels available in your area If you do not run the auto scan function to setup the channels your television may not operate properly Auto scan Channel auto search and memorize all viewable channel 1 Press MENU key to open OSD menu 2 Press gt or lt key to select TV Setup option 3 Press or V key to select Auto scan option 4 Press gt or lt key to start auto scan Note Please run the auto scan function to setup the TV for the broadcast or cable channels available in your area If you do not run the auto scan function to setup the channels your television may not operate properly 15 Enfocus Software Customer Support CHANNEL EDIT Add Erase 1 Press MENU key to
4. option 4 Press gt or key to adjust V Position data 5 Press MENU to exit or press or V key to adjust others 25 Enfocus Software Customer Support 8 Clock 1 Press MENU key to open OSD menu 2 Press gt or lt key to select PC Setup option 3 Press A or V key to select Clock option 4 Press gt or lt key to adjust Clock data 5 Press MENU to exit or press or V key to adjust others Phase 1 Press MENU key to open OSD menu 2 Press gt or lt key to select PC Setup option 3 Press A or V key to select Phase option 4 Press gt or lt key to adjust Phase data 5 Press MENU to exit or press or V key to adjust others Auto Adjustment 1 Press MENU key to open OSD menu 2 Press gt or lt key to select PC Setup option 3 Press A or V key to select Auto Adjustment option 4 Press gt or lt key to conduct Auto Adjustment then PC will adjust automatically if the adjustment is OK it will exit OSD menu automatically Attention PC SETUP Please Walt Color 1 Press MENU key to open OSD menu 2 Press gt or lt key to select PC Setup option 3 Press or V key to select Color option 4 Press gt or key to select Color If you choose Color as User you can adjust R G B according to your need Press MENU key to enter User Color menu 2 Press A or V key to select Red Green Blue o
5. English French and Spanish After adjustment press MENU key to exit or press or V key to adjust other options Position 1 Press or v key to select H Position option 2 Press gt or lt key to adjust OSD horizontal position After adjustment press MENU key to exit or press or V key to adjust other options V Position 1 Press or v key to select V Position option 2 Press gt or lt key to adjust OSD vertical position After adjustment press MENU key to exit or press or V key to adjust other options Time out 1 Press or v key to select Time out option 2 Press gt or lt key to adjust OSD display time After adjustment press MENU key to exit or press or V key to adjust other options Background 1 Press or v key to select Background option 2 Press gt or lt key to adjust OSD background After adjustment press MENU key to exit or press or V key to adjust other options Information This option can only be operated on PC signal source 1 Press or v key to select Information option 2 Press gt or lt key then the screen will display the current input information 3 Press MENU key to exit information menu 12 Enfocus Software Customer Support 8 CONNECT VIDEO RECORDER How to connect 1 Connect the antenna to VCR RF input 2 Connect the other RF cable from VCR output to TV input port if you connect the VCR to TV s AV input po
6. REFERENCE The present set had been designed and manufactured to assure personal safety Improper use can result in electric shock or fire hazard The safeguards incorporated with the present unit will protect you if you observe the following procedures when installation operating and servicing The present unit is fully transistorized and does not contain any element that can be repaired by user 9 ames INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL STATE OR FEDERAL LAWS FOR MORE INFORMATION CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW EIAE ORG Enfocus Software Customer Support 8 INSTALLATION PRESENTATION OF THE LCD TV Front Panel Control Knobs Source Key Press to select your input source gt lt Press to confirm your function selection and adjust the volume A or v Key Press to confirm your function selection and adjust TV channel MENU Key Press to show the OSD menu and exit OSD menu at the TV Power Key Press to turn on or off the TV Enfocus Software Customer Support E Preparation Remove the back plate at the back of the TV as shown on the illustration opposite Lay the LCD TV with the screen down on a table as it will be easier to connect your peripheral equipment Please take precaution not to damage the screen DO Audio R L COMP VIDEO S VIDEO D SUB DC IN 6 x INIIII
7. Software Customer Support MTS SAP Mute 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Sound Setup option 3 Press or V key to select Mute option 4 Press gt or lt key to select ON OFF You can also press x key on remote control to select mute after the selection you can adjust the volume or press LM to cancel the Mute 5 Press MENU to exit or press or V key to adjust others Enfocus Software Customer Support 22 PICTURE SETUP MENU 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Picture Setup option 3 Press A or V key to select submenu Note Picture Setup menu can only be selected under the signal source of AV TV S VIDEO E a Picture Brightness ontrast setup Brightness 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Picture Setup option 3 Press or V key to select Brightness option 4 Press gt or lt key to adjust Brightness data 5 Press MENU to exit or press or V key to adjust others Contrast 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Picture Setup option 3 Press A or V key to select Contrast option 4 Press gt or lt key to adjust Contrast data 5 Press MENU to exit or press or V key to adjust others Hue 1 Press MENU key to
8. open OSD menu 2 Press gt or lt key to select Picture Setup option 3 Press A or V key to select Hue option 4 Press gt or lt key to adjust Hue data 5 Press MENU to exit or press A or V key to adjust others Saturation 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Picture Setup option 3 Press A or V key to select Saturation option 4 Press gt or lt key to adjust Saturation data 5 Press MENU to exit or press or V key to adjust others 23 Enfocus Software Customer Support 8 Sharpness 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Picture Setup option 3 Press A or V key to select Sharpness option 4 Press gt or lt key to adjust sharpness data 5 Press MENU to exit or Press A or V key to adjust others Color Tone 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Picture Setup option 3 Press A or V key to select Color Tone option 4 Press gt or lt key to select warm or cool color 5 Press MENU to exit or press or V key to adjust others Black Level 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Picture Setup option 3 Press A or V key to select Black Level option 4 Press gt or lt key to adjust Black level data 5 Press MENU to exit or press or V
9. open OSD menu 2 Press gt or lt key to select TV Setup option 3 Press or V key to select Add Erase option 4 Press gt or lt key to select Add or Erase 5 Press MENU key to exit Add Erase menu or press or v key to adjust other options Current Program Current program is the channel set by the current TV you can press DISPLAY key to display the current channel on the top right of the screen Air Cable CATV Auto Scan Add Erase A d d Current Program 2 Sleep Timer Disabled Closed Caption OFF V CHIP Reset To Default 1 Press MENU key to open OSD menu 2 Press gt or lt key to select TV SETUP option 3 Press or V key to select Current Program option 4 Press gt or lt key to select the channel 5 Press MENU key to exit Current Program menu or press or V key to adjust other options You can also press the digital keys 0 9 100 or channel or v on the remote control to select channel SLEEP TIMER 1 Press MENU key to open OSD menu 2 Press gt or lt key to select TV Setup option 3 Press or v key to select Sleep Timer option 4 Press gt or lt key to select the sleep timer that you need to set you can select 30 60 90 120 minutes sleep timer 5 Press MENU key to exit sleep timer menu or press or v key to adjust other options Note You can also press SLEEP on the remote control the sleep timer will display on the top right of
10. the top of the set and cause product damage and or personal injury 18 Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer 19 Power Lines An outdoor antenna should be located away from power lines 20 Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electric Cord ANSI NFPA No 70 1984 provides information with respect to proper grounding of the mats and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure below ANTENNA GROUND CLAMP GROUNDING CONDUCTORS POWER SERVICE GROUNDING ELECTRODE SYSTEM EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical 21 Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spil
11. IIIIIIIIIIIIIIIIIIIntm S VIDEO L R COMP VIDEO L AUDIO TV input Earphone jack Audio Right Left Channel input Video Input S VIDEO Input PC Input 12V DC Power Input Enfocus Software Customer Support 8 SUPPLIED ACCESSORIES Power adapter MAGNAVOX 1 2 Owner s Manual SMART 15 400 37 Series LCD TV lt I OOOO 15MF400T 37 QUICK USE GUIDE CONNECT TO POWER Connect the mini plug of the AC power adapter to the DC Input Jack on the back of the 15 4007 37 b Connect AC power cable to the AC socket of the adapter SYSTEM CONNECTIONS a Using the antenna input Connect the antenna RF or cable terminal from an antenna or cable satellite to the TV input on 15MF400T 37 use the TV VIDEO button to select the 1SMF400T 37 input source to TV on the remote control Pis refer to back page Using AV video and AUDIO L R input and Connect AV equipment composite video and audio cable to the video and audio input jacks on the 5MF400T 37 use the TV VIDEO button to select ISMF400T 37 input source to AV on the remote control Pls refer to back page Using S VIDEO and AUDIO L R input and Connect AV equipment s video and audio input jacks on the 15MF400T 37 use the TV VIDEO button to select the ISMF400T 37 input source to S VIDEO on t
12. OSD menu 2 Press gt or lt key to select Sound Setup option 3 Press A or V key to select submenu Sound Setup Volume Bass NENNEN Treble C Balance C Mute OFF Reset To Default Volume 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Sound Setup option 3 Press A or V key to select Volume option 4 Press gt or lt key to adjust Volume data You can also press Volume gt or lt key on the remote control to adjust volume 5 Press MENU to exit or press A or V key to adjust others Bass 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Sound Setup option 3 Press or V key to select Bass option 4 Press gt or lt key to adjust Bass data 5 Press MENU to exit or press or V key to adjust others Treble 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Sound Setup option 3 Press or V key to select Treble option 4 Press gt or lt key to adjust Treble data 5 Press MENU to exit or press or V key to adjust others Balance 1 Press MENU key to open OSD menu 2 Press gt or lt key to select Sound Setup option 3 Press or V key to adjust Balance option 4 Press gt or lt key to adjust Balance data 5 Press MENU to exit or press or V key to adjust others 21 Enfocus
13. Turn off the equipment Television not responding Check whether the batteries are working Replace if necessary to remote control Clean the remote control sensor lens on the TV Use the buttons at the front of your TV 28 Enfocus Software Customer Support 8 GLOSSARY Audio Video Inputs Located on the rear and the front of the receiver these connectors RCA photo type plug are used for the input of audio and video signals Designed for use with VCRs or other accessories in order to receive higher picture resolution and offer sound connection options S Video Input Allow directly connection of high resolution video sources such as a Super VHS videocassette recorder Laser Disc player etc Provide improved picture resolution sharpness and clarity Composite Input Allows direct connector of high resolution video sources such as DVD player digital TV etc provides improved picture resolution sharpness and clarity Audio output Provide sound output it can be connected external speaker and enhance the sound quality Menu An on screen listing of feature control shows on the TV screen which is available for user adjustments Multichannel Television sound MTS The broadcast standard that allow stereo sound to be transmitted with the TV picture RF Radio Frequency or modulated signal design used as the carrier for television broadcasts Second Audio Program SAP Another or additional aud
14. YER 1 Connect the video output port of DVD player to the AV input port COMP VIDEO of TV 2 Connect the left and right audio channels of DVD to the left and right channels of audio input at AUDIO L R of TV If your DVD player is equipped with S VHS video port For better picture quality please connect the S Video cable to the S Video input of TV Connect the left and right channels of DVD to the left and right channels of audio input at AUDIO L R of TV How to play If you use AV connection please select AV If you use S Video connection please select S VIDEO CONNECT DIGTAL SET TOP BOX How to connect 1 Connect the video output port of Digital Set Top Box to the AV input port COMP VIDEO of TV 2 Connect the left and right audio channels of Digital Set Top Box to the left and right channels of audio input at AUDIO L R of TV How to use 1 Select AV 2 Turn on the DTV Set Top Box set Note n case you notice scrolling images wrong colors or no color no picture or even combinations of these on your screen check if the connections are done in the right way Check if the cable colors match with the Input connector colors 14 Enfocus Software Customer Support 8 TV SETUP MENU 1 Press MENU key to open OSD menu 2 Press gt or lt key to select TV Setup option 3 Press Aorv key to select submenu Air Cable CATV Auto Scan Add Erase Add Current Program 2 Sleep Timer Disabl ed
15. ate province Magnavox P O Box 671539 Marietta Ga 30006 0026 Enfocus Software Customer Support 32
16. chnician 10 Enfocus Software Customer Support GETTING STARTED 1 Place the TV on a sturdy surface Note Ensure that the TV is placed in a position to allow free flow of air Do not cover the ventilation Openings on the back cover To prevent any unsafe situations no naked flame sources such as lighted candles should be placed on or in the vicinity Avoid heat direct sunlight and exposure to rain or water The equipment shall not be exposed to dripping or splashing 2 Connect the antenna to the TV jack O on the rear of LCD TV Cable or TV Antenna Signal 3 Battery Installation Remove the battery compartment lid Place 2 AAA batteries in the remote S ow x 4 Plug the DC adaptor into DC IN 12V jack on the LCD TV Plug the power cable into an outlet and switch TV set on 5 Press the POWER button to turn on the TV 6 Run the Auto Scan function to install your LCD TV channels Refer to Page15 11 Enfocus Software Customer Support OSD SETTING 1 Press MENU key to open OSD menu 2 Press gt or lt key to select OSD Setup option 3 Press A or V key to select submenu OSD Setup OSD Setup Language English H Position 7 50 V Position mmm 50 Time out C 0 Background gag 10 Information Reset To Default Language 1 Press or v key to select Language option 2 Press gt or lt key to select language There are three kinds of language to select
17. ear water Clean only with a dry cloth Do not block any of the ventilation openings Install in accordance with the manufacturers instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other grounding type plug has two blades and third grounding prong The wide blade or third prong is provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over The TV should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the ap
18. elect V _CHIP option 4 Press gt or lt key to enter V _CHIP password validation menu You can press V CHIP key on the remote control to enter the menu directly 17 Enfocus Software Customer Support Enter PIN Press digital keys on the remote control enter the password to go into V CHIP control menu Default pass code for V Chip 0711 and should press twice time If your password is error then the screen will display PIN ERROR 5 After enter the V CHIP menu press A or V key to select if you want to set V_CHIP you need to set the Status on the condition of ON 1 Press A or V key to select Status option 2 Press gt or lt key to select ON or OFF 6 TV Guidelines Setting 1 Press A or V key to select TV Guidelines option 2 Press gt or lt key to enter TV Guidelines menu 3 Press A or V key to select block item 4 Press gt or lt key to select U or B selecting U means Unlock selecting B means Block 5 Ifthe setting is OK press MENU key to exit TV Guidelines menu 18 Enfocus Software Customer Support E TV ALL FV V S L D TV_Y U TV_Y7 U U TV_G U TV_PG U U U UU TV_14 U U U UU TV U U U U 7 Movie Guidelines Setting Press A or V key to select Movie Guidelines option N Press gt or lt key to enter Movie Guidelines menu Press gt or
19. equesting service Adjustments of the controls discussed there may save you a service call TO GET WARRANTY SERVICE IN U S A PUERTO RICO OR U S VIRGIN ISLANDS Contact a Magnavox factory service center see enclosed list or authorized service center to arrange repair In U S A Puerto Rico and U S Virgin Islands all implied warranties including implied warranties of merchantability and fitness for a particular purpose are limited in duration to the duration of this express warranty But because some states do not allow limitations on how long an implied warranty may last this limitation may not apply to you TO GET WARRANTY SERVICE IN CANADA Please contact Magnavox at 1 800 705 2000 Canada this warranty is given lieu of all other warranties No other warranties are expressed or implied including any implied warranties of merchantability or fitness for a particular purpose Magnavox is not liable under any circumstances for any direct indirect special incidental or consequential damages howsoever incurred even if notified of the possibility of such damages REMEMBER Please record below the model and serial numbers found on the product Also please fill out and mail your warranty registration card promptly It will be easier for us to notify you if necessary MODEL SERIAL This warranty gives you specific legal rights You may have other rights which vary from state province to st
20. he remote control Pls refer to back page Using D SUB connect and AUDIO L R input and Connect the PC computer to the D sub and audio jacks on the 15MF400T 37 the audio input share the audio L R input jacks on 15MF400T 37 use the PC button to select 15MF400T 37 source to PC on the remote control Pls refer to back page SVIDEO L R cowwxo auno i Q Audio RIL VIDEO S VIDEO D SUB DC IN TV input Earphone jack Audio Right Left Channel input Video Input S VIDEO Input PC Input 12V DC Power Input 4177800813 1A6987 Quick Setup Guide MAGNAVOX VERY SMART HetP CatL us MAGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH ANY QUESTIONS ABOUT YOUR NEW PRODUCT WE CAN GUIDE YOU THROUGH CONNECTIONS FIRST TIME SETUP AND ANY OF THE FEATURES WE WANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT 1 800 705 2000 OR VISIT US ON THE WEB AT WWW USASUPPORT MAGNAYOX COM Important Return your Warranty Registration Card within 10 days Owner s Manual Enfocus Software Customer Support SL VS L AN LISOd3Q SL Od i yeip uutul sso90Jd 9Se ld iANV13OdWI GRINOW qi MAGNAVOX Product Registration Card Proof of Purchase Product Safety Notification Additional Benefits of Product Ownership Warrant Card
21. ident unauthorized repair or other cause not within the control of Magnavox e reception problems caused by signal conditions or cable or antenna systems outside the unit e a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications e incidental or consequential damages resulting from the product Some states do not allow the exclusion of incidental or consequential damages so the above exclusion may not apply to you This includes but is not limited to prerecorded material whether copyrighted or not copyrighted e a product used for commercial or institutional purposes WHERE IS SERVICE AVAILABLE Warranty service is available in all countries where the product is officially distributed by Magnavox In countries where Magnavox does not distribute the product the local Magnavox service organization will attempt to provide service although there may be a delay if the appropriate spare parts and technical manual s are not readily available MAKE SURE YOU KEEP Please keep your sales receipt or other document showing proof of purchase Attach it to this owner s manual and keep both nearby Also keep the original box and packing material in case you need to return your product BEFORE REQUESTING SERVICE Please check your owner s manual before r
22. io channel provided for in the Multichannel Television Sound MTS broadcast standard A monaural soundtrack included within the recorded or video signal usually containing a second language translation for the displayed program Sleep Timer The function which you can set a time period after the TV turns off 29 Enfocus Software Customer Support DERBE e PRODUCT SPECIFICATION 15MF400T 37 Specification Aspect Ratio 1024x768 LCD Panel Sound System MTS SAP NTSC M Color System NTSC TV Function Closed Caption amp V chip Video Input s Color System NTSC PAL Signal Input Max Resolution 1024x768 75Hz Recommended Resolution 1024x768 60Hz Headphone Output Yes 3 5mmq 2 Power Supply 12V DC Input Horizontal Frequency kHz 31 5 60 PC Input Vertical Frequency Hz 56 75 Built in Speakers 2 x 2W L R Audio Output Adapter 100 240V AC 50 60Hz Power Consumption Max Power on lt 50W Off mode lt 2W De interlacer 2D de interlacer Video Feature Comb Filter Adaptive 4H Separation 3 2 Pull Down Recovery 30 Enfocus Software Customer Support 111 Wall Mount VESA 100mm x 100mm Other Features Tilt Angle front back So English French Canadian OSD language type Spanish Carton W x H x D 434mm x 407mm x 192mm Net kg 3 5kg Loose including package 5 0kg Remote controller Batteriesx2 AC Power adapter Power Cord Accessory User manual l
23. ive warranties and outstanding service networks in the industry What s more your purchase guarantees you ll receive all the information and special offers for which you qualify plus easy access to accessories from our convenient home shopping network Most importantly you can count on our uncompromising commitment to your total satisfaction All of this is our way of saying welcome and thanks for investing in a MAGNAVOX product P S To get the most from your MAGNAVOX purchase you must return your Warranty Registration Card within 10 days So please mail it to us right now Product Safety Notification By registering your product you ll receive notification directly from the manufacturer in the rare case of a product recall or safety defect Additional Benefits of Product Ownership Registering your product guaran tees that you ll receive all of the privileges to which you re entitled including special money saving offers Know these Safety symbols RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL A This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering The exclamation point calls attention to features fo
24. key to adjust others 24 Enfocus Software Customer Support PC SETUP MENU 1 Press MENU key to open OSD menu 2 Press gt or lt key to select PC Setup option 3 Press A or V key to select submenu Brightness 80 Contrast 50 H Position 50 V Position 50 Clock 50 Phase 00 Auto Adjustmen Color Cool Reset To Default Note PC Setup menu can only be selected under the PC signal source Brightness 1 Press MENU key to open OSD menu 2 Press gt or lt key to select PC Setup option 3 Press or V key to select Brightness option 4 Press gt or lt key to adjust Brightness data 5 Press MENU to exit or press or V key to adjust others Contrast 1 Press MENU key to open OSD menu 2 Press gt or lt key to select PC Setup option 3 Press or V key to select Contrast option 4 Press gt or lt key to adjust contrast data 5 Press MENU to exit or press or V key to adjust others Position 1 Press MENU key to open OSD menu 2 Press gt or lt key to select PC Setup option 3 Press or V key to select H position option 4 Press gt or lt key to adjust H Position data 5 Press MENU to exit or press or V key to adjust others V Position 1 Press MENU key to open OSD menu 2 Press gt or lt key to select PC Setup option 3 Press or V key to select V Position
25. led into the enclosure through openings Enfocus Software Customer Support TABLE OF CONTENT INSTRODUCTION WELCOME REGISTRATION OF YOUR TV 2 IMPORTANT SAFETY INSTRUCTIONS enne ener reno eet 3 TABLE OP CONTENT l ee 5 INSTALLATION PRESENTATION OF THE LOD u L 6 7 SUPPLIED ACCESS ONIES 8 REMOTE CONTROL OPERATION 9 INSTALLING LCD TV ON THE WALL l 10 GETTING STARTED a 11 OSD SETTING ma es 12 CONNECT VIDEO RECORDER ducite ee 13 CONNECT CAMERA CAMCORDER VIDEO GAME SET 13 CONNECT DUD 14 CONNECT DIGTAL SET TOP BOX rete 14 TV SETUP MENU TU CHANNEL INSTALLATION u u u u 15 CHANNEL EDIT ca ea 16 SEEEP TER 16 DLOSED ONTON 17 CHANNEL LOCK ca 17 20 SOUND SETUP MENU 21 22 PICTURE SETUP 23 24 SETUP M NU 25 26 GENERAL INFORMATION 27 5 25 55 S 7 775 27 CALL BEPORB SFE VICE ee 28 me 29 PRODUCT eee 30 31 LIMITED WARRANTY eee 32 THANK YOU VERY MUCH FOR CHOOSING THE LCD TV WE RECOMMEND THAT YOU TAKE A FEW MINUTES TO READ CAREFULLY THROUGH THIS MANUAL BEFORE INSTALLING AND SWITCHING ON THE TV PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR YOUR FUTURE
26. lt key to select U or B selecting U means Unlock selecting B means Block O Press A or V key to select block item If the setting is OK press MENU key to exit Movie Guidelines menu Movie Guidelines G PG PG 13 R NC_17 X NR 8 Change PIN 1 Press A or V key to select Change PIN option 2 Press gt or lt key to enter Change PIN menu 3 Press digital keys on the remote control and then enter the new password Change PIN Enter new PIN 4 Enter the new password again if the setting is OK the display information as below then it will exit the Change PIN menu automatically 19 Enfocus Software Customer Support 8 Change PIN Confirm new PIN eer CHECK OK Reset To Default 1 Press MENU key to open OSD menu 2 Press gt or lt key to select any Setup options 3 Press A or V key to select Reset To Default option 4 Press gt or lt key to reset Reset To Default is convenient for all settings in the user OSD to recall to factory default data Note The reset to default function in each function item is the same under the signal source of AV TV S VIDEO When we select the Reset To Default in each function item under the PC signal source it not only recall all data to default data but also have an adjustment automatically 20 Enfocus Software Customer Support 8 SOUND SETUP MENU 1 Press MENU key to open
27. paratus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped This product may contain mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industries Alliance www eiae org Enfocus Software Customer Support Es e 16 Damage Requiring Service The appliance should be serviced by qualified service personnel when A power supply cord or the plug has been damaged or B Objects have fallen or liquid has been spilled into the appliance or C The appliance has been exposed to rain or D The appliance does not appear to operate normally or exhibits a marked change in performance or E The appliance has been dropped or the enclosure damaged 17 Tilt Stability All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design Do not compromise these design standards by applying excessive pull force to the front or top of the cabinet which could ultimately overturn the product Also do not endanger yourself or children by placing electronic equipment toys on the top of the cabinet Such items could unsuspectingly fall from
28. ption 3 Press gt or lt key to adjust Red Green Blue data 4 Press MENU TO exit to Color menu 5 Press or V key to select other adjustment items then press MENU to exit Reset To Default Enfocus Software Customer Support 8 General Information Care of the screen Do not rub or strike the screen with anything hard as this may scratch mar or damage the screen permanently Unplug the screen before cleaning the screen Dust the TV by wiping the screen and the cabinet with a soft clean cloth If the screen requires additional cleaning use a clean damp cloth Do not use liquid cleaners or aerosol cleaners Mobile telephone warning To avoid disturbances in picture and sound malfunctioning of your TV or even damage to the TV keep away your mobile telephone from the TV End of life directives We are paying a lot of attention to produce environmentally friendly in green focal areas Your new LCD TV contains materials which can be recycled and reused At the end of its life specialized companies can dismantle the discarded LCD TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of When you replace your existing equipment please find out about the local regulation regarding disposal of your old television batteries and packing materials 27 Enfocus Software Customer Support Before Call Service Please make these simple checks before calling service These
29. r which you should read the enclosed literature closely to prevent operating and maintenance problems WARNING To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert ATTENTION Pour viter les choc lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond For Customer Use Enter below the Serial No which is located on the rear of the cabinet Retain this information for future reference Model No Serial No MAGNAVOX Visit our World Wide Web Site at http www usasupport magnavox com Enfocus Software Customer Support IMPORTANT SAFETY INSTRUCTIONS The present set had been designed and manufactured to assure personal safety Improper use can result in electric shock or fire hazard The safeguards incorporated with the present unit will protect you if you observe the following procedures when installation operating and servicing The present unit is fully transistorized and does not contain any element that can be repaired by user oe oe m M sx 10 11 12 13 14 15 Read Before Operating Equipment Keep these instructions Read all warnings Follow all instructions Do not use this apparatus n
30. rt COMP VIDEO you will get the better quality of video and audio 3 TV s AV input does not include audio please connect VCR audio output to TV s audio input at AUDIO L R If your VCR is equipped with S VHS video port For better picture quality connect an S Video signal with the S VIDEO input on the TV instead of connecting to the AV input port COMP VIDEO S Video does not include audio audio cables must be connected to TV audio input at AUDIO L R Watching VCR 1 If you use TV connection select the TV channel search 2 If you use AV connection select AV 3 If you use S Video connection Select s video 4 Insert videotape in the VCR and press the PLAY button CONNECT CAMERA CAMCORDER VIDEO GAME SET 1 Connect the video output port of Camera Camcorder Video Game Set to the TV s AV input port COMP VIDEO 2 Connect the left and right audio channels of Camera Camcorder Video Game Set to the left and right channels of audio input at AUDIO L R of TV If your Camera Camcorder Video Game Set is equipped with S VHS video port For better picture quality please connect the S Video cable to the S Video input of TV Connect the left and right channels of Camera Camcorder Video Game Set to the left and right channels of audio input at AUDIO L R of TV How to play If you use AV connection please select AV If you use S Video connection please select S VIDEO 13 Enfocus Software Customer Support CONNECT DVD PLA
31. t English French Canadian type Spanish gt QSG Warranty Card lt English only gt with Stand W x H x D 371 6mm x 346 mm x 147 5 without Stand W x H x D 371 6mm x 324mm x 47 5mm 31 Enfocus Software Customer Support LIMITED WARRANTY LCD TV 90 Days Free Labor One Year Parts Exchange This product must be carried in for service WHO IS COVERED You must have proof of purchase to receive warranty service A sales receipt or other document showing that you pur chased the product is considered proof of purchase WHAT IS COVERED Warranty coverage begins the day you buy your product For 90 days thereafter all parts will be repaired or replaced free and labor is free From 90 days to one year from the day of purchase all parts will be repaired or replaced free but you pay for all labor charges After one year from the day of purchase you pay for the replacement or repair of all parts and for all labor charges All parts including repaired and replaced parts are covered only for the original warranty period When the warranty on the product expires the warranty on all replaced and repaired parts also expires WHAT IS EXCLUDED Your warranty does not cover e labor charges for installation or setup of the product adjust ment of customer controls on the product and installation or repair of antenna systems outside of the product e product repair and or part replacement because of misuse acc
32. the screen 16 Enfocus Software Customer Support CLOSED CAPTION 1 Press MENU key to open OSD menu 2 Press gt or lt key to select TV SETUP option 3 Press A or V key to select Closed Caption option 4 Press gt or lt key to set CC1 CC4 and TT1 and TT4 5 Press MENU key to exit Closed Caption menu or press A or V key to adjust other options You can also press CAPTION on the remote control enter Closed Caption menu directly then press step 4 to adjust TVNIDEO MTS SAP Reset To Default Caption Mode CC1 CC4 Dialogue and descriptions for the action on the captioned TV program shows on screen Text Mode TT1 TT4 Often used for channel guide schedules bulletin board information for Closed Caption programs news weather information or stock marker reports Note Not all Closed Caption modes are necessarily being use by a TV channel during the transmission of a Closed Caption program CHANNEL LOCK V Chip It is the parental control function V chip It is used to block program viewing based on the ratings by the broadcaster The default setting is to allow all programs to be viewed Viewing can be blocked by the type of program and by the categories chosen be blocked It is also possible to block all program viewing for a time period 1 Press MENU key to open OSD menu 2 Press gt or lt key to select TV Setup option 3 Press A or V key to s
33. tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty Ghost or double image This may be caused by obstruction to the antenna due to high rise buildings or hills Using a highly directional antenna may inprove the picture No power Check that the TV s AC power cord is plugged into the mains socket Unplug the TV wait for 60 seconds Then re insert plug into the mains socket and turn on the TV again No picture Check antenna connections at the rear of the TV to see if it is properly connected to the TV possible broadcast station trouble Try another channel Adjust the contrast and brightness settings Check the Closed Captions control Some TEXT modes could block the screen Good picture but no sound Check the cable connection Increase the VOLUME Check that the TV is not muted press the button on the remote control Good sound but poor color Adjust the contrast color and brightness settings Poor picture Sometimes poor picture quality occurs when having activated an S VHS camera or camcorder connected and having connected another peripheral at the same time In this case please connect power cords of other peripherals to a different power outlet Snowy picture and noise Check the antenna connection Horizontal dotted line This may be caused by electrical interference e g hairdryer nearby neon lights etc
Download Pdf Manuals
Related Search