Bosch Power Tools GBH 24 VFR Drill User Manual
Contents
1. 64 0 9 47 82 914 Declaration of Conformity declare under our sole responsibility that this product is in conformity with the following stand ards or standardization documents EN 50 144 Battery powered products and EN 60 335 Bat tery charger according to the provisions of the di rectives 73 23 EEC 89 336 EEC 98 37 EC C 02 Dr Gerhard Felten Dr Eckerhard Str tgen Senior Vice President Engineering Head of Product Certification Robert Bosch GmbH Geschaftsbereich Elektrowerkzeuge Subject to change without notice English 62. Bedienungsanleitung Operating Instructions Instructions d emploi Instrucciones de servicio Manual instru es Istruzioni d uso 52 GBH 24 VFR VRE Vorderseite 1 Mittwoch 28 August 2002 2 38 14 Gebruiksaanwijzing Betjeningsvejledning Bruksanvisning G 94 VER Brukerveiledningen GBH 24 VRE Odnyia Xslplahou Kullanim kilavuzu Deutsch English Francais Espanol Portugu s Italiano Nederlands Dansk Svenska Norsk Suomi Turkce 2 1619 929 589 02 08 0 L mm mm 3 50 50 100 50 100 150 50 100 150 200 50 100 150 200 50 100 150 200 250 50 100 150 50 100 150 200 400 550 100 150 7 7 8 8 8 8 8 8 9 9 0 L mm mm 400 200 400 200 400 2 608 597 773 1618 596 231 2 608 597 774 1 618 596 164 1 618 596 189 2 608 596 199 1 618 596 165 2 608 596 146 2 608 597 775 2 608 597 776 1 618 596 166 1 618 596 167 2 608 596 115 2 608 597 777 1 618 596 168 1 618 596 169 2 608 597 778 2 608 597 779 2 608 597 780 1 618 596 170 1 618 596 171 2 608 597 130 1 618 596 172 1 618 596 173 1 618 596 174 1 618 596 264 2 608 596 116 2 608 596 183 2 608 596 158 1 618 596 175 2 608 597 000 2 608 597 001 2 608 597 002 2 608 597 003 2 608 597 004 0 L mm mm 50 100 150 200 250 300 400 550 100 150 200 250 100 150 200 250 400 100 150 200
3. Impact Stop Switch Set the impact stop switch 5 to Drilling only at a standstill Set the impact stop switch 5 to the desired posi tion Drilling Hammer drilling _ Electric Brake When releasing the On Off switch 7 the speed of the drill chuck is reduced to a stop thus prevent ing the run on of the tool Any sparking occurring during this process in the area of the upper ventilation slots is normal and does not damage the machine For screwdriving applications wait until the screw is flush with the material and then release the On Off switch 7 The screw head does not pene trate into the material then English 4 Change SDS plus 24 SDS plus tool holder can easily be replaced by the keyless chuck supplied with the machine The keyless chuck serves for rapid insertion of the tools without the SDS plus g round drill screwdriver bits hold machine Removal Danger of injury Before removing the chuck make sure to remove the tools or bits Tightly grip the chuck locking ring 3 and pull strongly in the direction of the arrow Remove the chuck Mounting Using the whole hand tightly grip the chuck Twist it onto the taper shaft of the chuck until it is clearly heard to latch The chuck automatically locks Check the locking function by pulling at the chuck Key
4. Chuck locking ring Push button for depth stop adjustment Impact stop switch Rotational direction switch switch Battery charge display Auxiliary handle Depth stop Release button Protective cap Not all of the accessories illustrated or described are included as standard delivery 13 1 619 929 589 TMS 08 08 02 Noise Vibration Information Measured values determined according 10 EN 50 144 Typically the A weighted noise levels of the prod uct are sound pressure level 91 dB A sound power level 104 dB A Wear hearing protection The typically weighted acceleration is 11 52 Intended Use The machine is intended for hammer drilling in concrete brick and stone It is also suitable for drilling without impact in wood metal ceramic and plastic Machines with electronic control and right left rotation are also suitable for screw driving and thread cutting English 1 For Your Safety N Working safely with this ma chine is possible only when the operating and safety information are read completely and the in structions contained therein are strictly followed In addition the general safety notes in the en closed booklet must be ob served Before using for the first time ask for a practical demon stration Wear protective glasses and hearing protec tion For long hair wear hair protection Work only with closely fitting clothes Before each us
5. 100 150 200 250 400 100 200 150 250 1618 596 176 1618 596 177 1618 596 265 1618 596 178 1618 596 315 1618 596 266 1618 596 267 2 608 596 117 1 618 596 179 1 618 596 316 1 618 596 180 2 608 597 781 1 618 596 181 1 618 596 268 1 618 596 182 2 608 597 782 1 618 596 269 1 618 596 183 1 618 596 318 1 618 596 184 1 618 596 185 1 618 596 270 1 618 596 186 1 618 596 271 2 608 596 118 1 618 596 187 1 618 596 188 1 618 596 185 1 618 596 186 L L mm mm mm mm 5 10 950 2608 597 122 18 400 1618596 260 12 550 1618 596 224 18 550 2608 596 120 12 950 2608 597 123 18 750 2608 596 122 14 550 1 618 596 225 18 950 2608 597 126 14 950 2608 597 124 19 150 1618596 205 15 400 1618 596 257 19 250 10618596 320 16 400 1 618 596 259 19 400 1 618 596 261 16 550 1618596 226 20 150 1618 596 207 16 750 1618596 227 20 250 1618 596 262 16 950 2608 597 125 20 400 1618 596 263 17 150 1618 596 203 20 550 1 618 596 321 18 150 1 618 596 204 20 950 2608 597 127 18 250 1 618 596 319 25 16 6 250 2 602 025 120 b 1 618 600 009 22 2 603 001 010 35 51 1 618 600 010 2 a 2 607 018 296 24 V 1 7 Ah NiCd 2 607 335 082 24 3 0 Ah NiCd 2 607 335 216 1 608 571 062 8 15 13 mm 60 2425 2 607 224 426 EU 2 607 224 428 UK 2 607 224 430 5 15 2498 2 607 224 484 EU 2 607 224 486 UK 2 607 224 488 AUS 2 607 0
6. product is equipped with a nickel cadmium bat tery the battery must be collected recycled or dis posed of in an environmen tally friendly way Defective or worn out batteries must be recycled according to the guidelines 91 157 EEC Batteries no longer suitable for use can be directly returned at Great Britain Robert Bosch Ltd B S C P O Box 98 Broadwater Park North Orbital Road Denham Uxbridge Middlesex UB 9 5 Service 44 0 18 95 83 87 82 Advice 44 0 18 95 83 87 91 FaX nnn 44 0 18 95 83 87 89 18 1 619 929 589 TMS 08 08 02 Service and Customer Assistance Great Britain Robert Bosch Ltd B S C P O Box 98 Broadwater Park North Orbital Road Denham Uxbridge Middlesex UB 9 5HJ 44 0 18 95 83 87 82 Advice 44 0 18 95 83 87 91 FaX 44 0 18 95 83 87 89 Ireland Beaver Distribution Ltd Greenhills Road Tallaght Dublin 24 Service arinen 353 0 1 414 9400 353 0 1 459 8030 Australia Robert Bosch Australia L t d RBAU SPT2 1555 Centre Road P O Box 66 Clayton 3168 Clayton Victoria 61 0 1 800 804 777 61 0 1 800 819 520 www bosch com au E Mail CustomerSupportSPT au bosch com New Zealand Robert Bosch Limited 14 16 Constellation Drive Mairangi Bay Auckland New Zealand 64 0 9 47 86 158
7. 00 206 3 1619 929 589 02 08 gt lt t L m O a 06900 5550 lt ee 5 55250 A ST GBH 24 VFR 5 1619 929 589 02 08 Tool Specifications Rotary Hammer Rated power Output power Rated speed Impact rate Impact energy per stroke Tool holder Drilling output Concrete twist drill bit Wood Steel Weight with battery approx Battery Order number Temperature control Rated voltage Capacity Weight approx W W rpm bpm J mm mm mm kg Ah 24 0611 261 7 350 270 0 1 000 0 4 400 1 3 SDS plus 4 20 20 10 3 5 NiCd 2 607 335 082 NTC 24 1 7 1 3 GBH 24 VFR GBH24VRE GBH 24 VRE 06112615 0611260 7 0611 260 5 350 350 350 270 270 270 0 1 000 0 1 000 0 1 000 0 4 400 0 4 400 0 4 400 1 3 1 3 1 3 SDS plus SDS plus SDS plus 4 20 4 20 4 20 20 20 20 max 10 10 10 4 2 35 4 2 2 607 335 216 2 607 335 082 2 607 335 216 24 24 24 3 0 1 7 3 0 2 0 2 0 Please observe the order number of your machine The trade names of the individual machines vary Machine Elements Button Battery O O OOO PR G N Interlock 16 Knurled ring Dust protection cap Locking sleeve
8. ays for a longer time temperatures over 50 C cause damage Do not open the battery and protect it from im pact Store in a dry and frost free place When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a con nection from one terminal to another Shorting the battery terminals together may cause burns or a fire Do not dispose of the battery in household waste or discard into fire or water English 2 Before Putting into Operation Battery Charging A battery that is new or has not been used for a longer period does not develop its full capacity until after approximately 5 charging discharging cycles To remove the battery 10 push back the release button 13 and pull the battery out downwards Do not exert any force see figure E Please refer to the enclosed Battery Charger in structions for the operation of the battery charger as well as for a description of the charging proc ess The battery is equipped with an NTC temperature control which allows charging only within a tem perature range of between 0 and 45 A long battery service life is achieved in this man ner significantly reduced working period after charging indicates that the batteries are used and must be replaced Observe the notes on environmental protec tion Battery Charge Display The battery 10 is
9. e check the machine and bat tery If damage is detected do not use the ma chine Have repairs performed only by a qual ified technician Never open the machine your self Use power tools only with specifically des ignated battery packs Use of any other bat tery packs may create a risk of injury and fire Under abusive conditions liquid may be ejected from the battery avoid contact contact accidentally occurs flush with wa ter H liquid contacts eyes additionally seek medical help Liquid ejected from the battery may cause irritation or burns Before any work on the machine itself e g maintenance tool change etc as well as when transporting and storing always set the rotational direction switch to the centre position Otherwise danger of injury is given when unintentionally actuating the On Off switch Ensure the switch is in the off position be fore inserting battery pack Inserting the bat tery pack into power tools that have the switch invites accidents Convince yourself before using that the battery is securely seated in the machine Do not strain the machine so heavily that it comes to a standstill When working with the machine always hold firmly with both hands and provide for a secure stance Use the machine only with the auxiliary han dle 11 14 1 619 929 589 TMS 08 08 02 Hold the power tool only by the insulated gripping surfaces when pe
10. fitted with a battery charge dis play 9 It indicates the charge of the battery at any given time during the working process By pressing the button 8 the battery charge can also be checked when the battery has been re moved or when the machine 15 at a standstill Af ter approx 4 seconds the battery charge display automatically turns off Battery charge 10 20 20 40 9 40 60 60 80 80 100 When first display element begins to flash 0 10 the battery is almost empty and must be recharged To maintain the accuracy of the display occa sionally discharge the battery until the speed of the machine is considerably reduced and the bat tery charge display has completely turned Frequent recharging after short intervals of use impairs the accuracy of the display 15 1 619 929 589 TMS 08 08 02 Auxiliary Handle Depth Stop see figure Use the machine only with the auxiliary handle 11 Loosen the handle by turning to the left Rotate the auxiliary handle 11 and adapt to the working position Make sure that the clamping band 17 of the auxiliary handle remains in the groove Firmly retighten the handle The drilling depth can be set with the depth stop 12 For this press the push button for the depth stop adjustment 4 adjust the required drilling depth X and release the push button for the depth stop adjustment 4 again The ribbing on depth stop 12 must point up
11. less Chuck for Tools with a Cylindrical Shaft GBH 24 VFR Tools with a cylindrical shaft can be clamped us ing the keyless chuck gt gt The keyless chuck is not suitable for hammer drilling Mounting the Keyless Chuck Remove the SDS plus tool holder Mount the keyless chuck in the same way as the SDS plus tool holder 17 1 619 929 589 TMS 08 08 02 Open the Keyless Chuck see figure Loosen chuck by turning the interlock 15 clock wise Open chuck by turning it counter clockwise Clamping the Tool Insert the tool and manually close chuck while holding knurled ring 16 Lock chuck by turning interlock 15 counter clock wise Set the impact stop switch 5 to Drill Removing the Keyless Chuck Tightly grip the chuck locking ring 3 and pull it strongly in the direction of the arrow Key Type Drill Chuck for Tool Inserts with Cylindrical Shank GBH 24 VRE Tool inserts with cylindrical shank can be clamped with the key type drill chuck accessory and the corresponding adapter accessory lt gt Set the impact stop switch 5 to Drill ing only at a standstill Clean and lightly grease the adapter shank Insert the assembled chuck with a twisting man ner into the tool holder until it latches The chuck locks itself Check the locking by pulling on the chuck Screwdriving see figure The machine is also suitable for occasional screwdriving applications however not for
12. ress the On Off switch 7 and keep it depressed The machine runs with variable speed between 0 and maximum depending on the pressure applied to the On Off switch 7 Light pres sure on the On Off switch 7 results in low rotational speed thus allow ing drilling to begin in a smooth controlled manner Further pres sure on the switch results in an in crease in speed To switch off the machine release the On Off switch 7 Do not strain the machine so heavily that it comes to a standstill The machine is not suitable for stationary op eration g in a drill stand Overload Clutch If the drill bit jams or edges the drive to the drill spindle is interrupted Due to the arising forces always hold the ma chine firmly with both hands and provide for a secure stance Before pulling out a stuck tool insert first remove the machine from it 16 1619 929 589 TMS 08 08 02 Reversing Rotational Direction Operate the rotational direction switch 6 only standstill The rotational direction switch 6 is used to re verse the rotational direction of the machine However this is not possible with the switch 7 actuated Right Rotation Turn the rotational direc tion switch through to the left stop normal op eration drilling screw driving etc Left Rotation Press the rotational di rection switch through to the right stop for loos ening and unscrewing screws and nuts
13. rforming an op eration where the cutting tool may run into hidden wiring Contact with a live wire will make exposed metal parts of the tool live and shock the op erator Use appropriate detectors to determine if utility lines are hidden in the work area or call the local utility company for assist ance Contact with electric lines can lead to fire and electric shock Damaging a gas line can lead to explosion Penetrating a water line causes property damage Be careful when screwing in long screws ger of sliding off Set the machine against the screw nut only when switched off When screwdriving operate in first gear as well as with a low speed Always switch the machine off and wait until it has come to a standstill before placing it down Never allow children to use the machine Bosch is only able to ensure perfect operation of the machine if the original accessories in tended for it are used Battery and Battery Charger The enclosed operating instructions for the battery charger must be read carefully Recharge only with the charger specified by the manufacturer A charger that is suita ble for one type of battery pack may create a risk of fire when used with another battery pack Allow a heated battery to cool before charging Protect the battery from heat and fire Danger of explosion Do not place the battery on radi ators or expose to strong sun r
14. screwdriving applications with extreme re ductions of speed at which the overload clutch frequently responds For screwdriving the universal bit holder with SDS plus shank accessory must be used Set the impact stop switch 5 to Drill Set the direction of rotation to right hand rota tion Regulate the speed with the On Off switch 7 English 5 Maintenance and Before any work the machine itself move the battery gt gt For safe and proper working always keep the machine and the ventilation slots clean Keep the tool holder clean at all times Changing the Dust Protection Cap A damaged dust protection cap should be changed immediately We recommend having this carried out by an after sales service If the machine should fail despite the care taken in manufacturing and testing procedures repair should be carried out by an after sales service centre for Bosch power tools In all correspondence and spare parts orders please always include the 10 digit order number given on the nameplate of the machine Environmental Protection Recycle raw materials instead of disposing as waste The machine accessories and packaging should be sorted for en vironmental friendly recycling These instructions are printed on recycled paper manufactured without chlorine The plastic components are labelled for catego rized recycling Nickel cadmium battery If your
15. wards Changing the Tool Before any work on the machine itself re move the battery With the SDS plus tool holder simpler and easier tool changing is possible without additional aids gt Grease the shank end of the tool regu larly The dust protection cap 1 largely prevents the entry of drilling dust during operation When in serting the tool take care that the dust protection cap 1 is not damaged A damaged dust protection cap should be changed immediately We recommend having this carried out by an after sales service As a requirement of the system the SDS plus tool must rotate freely At no load speed this leads to a certain amount of ra dial run out This does not affect the accuracy of the drill hole as the bit is automatically centred dur ing drilling Inserting see figure Clean and grease the shank end of the tool Insert the tool in a twisting manner into the tool holder until it locks Check if it has locked by pull ing the tool Removing see figure Push back the locking sleeve 2 of the tool holder and remove the tool English 3 Initial Operation Inserting Battery Before re inserting the battery 10 remove the protective cap 14 if necessary see figure E Set the rotational direction switch 6 to the centre position locked off Slide the charged battery 10 into the handle until it can be felt to latch Switching On and Off To start the machine p
Download Pdf Manuals
Related Search