Bissell 1719 Carpet Cleaner User Manual
Contents
1. Bissell Garage Pro VACUUM USER S GUIDE 18P0 SERIES 43Z3 SERIES 3 Safety Instructions 4 Product View 5 6 Assembly 6 9 Operation 3E PRO 10 12 Maintenance and Cate 13 Troubleshooting 14 Consumer Services 15 Replacement Parts 16 Warranty ug110 4053_18P0_608 indd 1 6 13 08 12 35 27 PM Thanks for buying a BISSELL vacuum We re glad you purchased a BISSELL Garage Pro vacuum Everything we know about floor care went into the design and construction of this complete high tech home cleaning system Your BISSELL Garage Pro vacuum is well made and we back it with a limited two year warranty We also stand behind it with a knowledgeable dedicated Consumer Services Department so should you ever have a problem you ll receive fast considerate assistance My great grandfather invented the floor sweeper in 1876 Today BISSELL is a global leader in the design manufacture and service of high quality homecare products like your BISSELL Garage Pro vacuum Thanks again from all of us at BISSELL rr d Kr Mark J Bissell Chairman President and Chief Executive Officer Bissell 2 www bissell com 800 237 7691 ug110 4053_18P0_608 indd 2 6 13 08 12 35 27 PM IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance basic precautions should be observed including the following READ ALL INSTRUCTIONS BEFORE USING YOUR GARAGE PRO VACUUM Always connect to a polarized outlet le2. Dirt tank is full of debris 5 Empty tank and reattach Vacuum cleaner and tools won t pick up or low suction Possible causes Remedies 1 Hose not properly positioned 1 Make sure hose is fully connected to base 2 Dirt tank not installed properly 2 Check assembly of upper and lower portions correctly position and secure into place 3 Dirt tank full 3 Empty dirt tank 4 Clog in cleaner 4 Follow instructions on pg 11 and 12 for Clearing clogs 5 Filters are dirty 5 Check and clean filter Hose not properly attached 6 Make sure hose collar is pushed in or in locked position 7 Vacuum is not suctioning or blowing 7 Make sure hose is in correct inlet outlet Other maintenance or service not included in the manual should be performed by an authorized service representative Thank you for selecting a BISSELL product If you should happen to need assistance during assembly or operation call 1 800 237 7691 Please do not return this product to the store For any questions or concerns BISSELL is happy to be of service Contact us directly at 1 800 237 7691 Bissell www bissell com 800 237 7691 13 ug110 4053_18P0_608 indd 13 6 13 08 12 35 33 PM BISSELL Consumer Services For information about repairs or replacement parts or questions about your warranty call BISSELL Consumer Services 1 800 237 7691 Monday Friday 8 a m 10 p m ET Saturday 9 a m 8 p m ET Or write BISSELL Homecare Inc PO Box 3606 Grand
3. 4053_18P0_608 indd 3 Bissell WW This appliance is provided with double insulation Use only identical replacement parts See instructions for servicing of double insulated appliances WW urn off all controls before plugging or unplugging vacuum cleaner Use extra care when cleaning stairs Do not pick up flammable materials lighter fluid gasoline Kerosene wood shavings etc or use in the presence of explosive liquids or vapors HM Do not pick up toxic material chlorine bleach ammonia drain cleaner etc Do not use vacuum cleaner in an enclosed space filled with vapors given off by oil base paint paint thinner some moth proofing substances flammable dust or other explosive or toxic vapors Do not pick up hard or sharp objects such as glass nails screws coins etc Do not pick up anything that is burning or smoking such as cigarettes matches or hot ashes Do not use without filters in place Keep appliance level Do not carry the vacuum cleaner while it is running SAVE THESE INSTRUCTIONS FOR FUTURE USE THIS APPLIANCE HAS A POLARIZED PLUG To reduce the risk of electric shock this appliance has a polarized plug one blade is wider than the other This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician to install a proper outlet Do not change the plug in any way Th
4. Rapids MI 49501 ATTN Consumer Services Or visit the BISSELL website www bissell com When contacting BISSELL have model number of cleaner available Please record your Model Number Please record your Purchase Date NOTE Please keep your original sales receipt It provides proof of purchase date in the event of a warranty claim See Warranty on page 16 for details 14 www bissell com 800 237 7691 ug110 4053_18P0_608 indd 14 6 13 08 12 35 33 PM Replacement parts BISSELL Garage Pro Vacuum You may purchase parts from your retailer by calling BISSELL Consumer Services or by visiting our website Below is a list of common replacement parts While not all of these parts may have come with your specific model they are available for purchase if desired Please note all attachments may not store on board your vacuum Item Part No Part Name 1 203 0151 Hose Assembly 32 ft 2 203 0152 Hose Holder 3 203 0153 Accessory Caddy 4 203 0154 Wall Mounting Bracket 5 203 0155 Extension Wands 2 6 203 0156 Large Area Cleaning Tool T 203 0157 Multi Surface Floor Tool 8 203 0158 Crevice Tool 9 203 0159 Dusting Brush 10 203 0160 Small Upholstery Tool 11 203 0161 Precision Suction Tool 12 203 0162 Precision Blower Tool Is 203 0163 Detailing Tools Assembly 14 203 0164 Top Cover 15 203 0165 secondary Filter 16 203 0166 Primary Filter 17 203 0167 Hose Inlet 18 203 0168 Hose Inlet Gasket 19 203 0169 Dirt Tank Gasket 20
5. 203 0170 Dirt Tank Funnel 21 203 0171 Dirt Tank Assembly e D F 0 0 ur e www bissell com ug110 4053_18P0_608 indd 15 he A 21 Li LU A Al e o A EEN 800 237 7691 15 6 13 08 12 35 35 PM Warranty BISSELL Garage Pro Vacuum This warranty gives you specific legal rights and you may also have other rights which may vary from state to state If you need additional instruction regarding this warranty or have questions regarding what it may cover please contact BISSELL Consumer Services by E mail telephone or regular mail as described below Limited Two Year Warranty Subject to the EXCEPTIONS AND EXCLUSIONS identified below upon receipt of the product BISSELL Homecare Inc will repair or replace with new or remanufactured components or products at BISSELL s option free of charge from the date of purchase by the original purchaser for two years any defective or malfunctioning part see information below on If your BISSELL product should require service This warranty applies to product used for personal and not commercial or rental service This warranty does not apply to fans or routine maintenance components such as filters belts or brushes Damage or malfunction caused by negligence abuse neglect unauthorized repair or any other use not in accordance with the User s Guide is not covered If your BISSELL product should require service Contact BISSELL Consu
6. Printed in Korea Part Number 110 4053 Rev 6 08 Visit our website at www bissell com Bissell 16 3 www bissell com 800 237 7691 ug110 4053_18P0_608 indd 16 6 13 08 12 35 35 PM
7. ank reaches its water capacity this prevents water from reaching the motor If this happens the red light will turn on indicating the tank needs immediate emptying H the temperature exceeds the unit s limit the thermal protection device will turn on and automatically power off the unit If this happens wait 30 minutes prior to restarting the vacuum In the event of a clogged or full dirt tank the yellow light will turn on indicating the dirt tank and filter need cleaning To ensure best performance clean the tank and filter every 15 30 days a p ON o Bissell www bissell com EN ug110 4053_18P0_608 indd 7 A WARNING Do not tamper with float water sensor Always make sure the float water sensor is in the dirt tank and not outside of the tank CAUTION Do not run any objects including cars over hose Z WARNING Do not suck up volatile or flammable liquids such as gasoline kerosene or oil 800 237 7691 T 6 13 08 12 35 30 PM Operation Thermal motor protection An internal thermal protector has been designed into your cleaner to protect it from overheating When the thermal protector activates the main vacuum motor will stop operating If this happens proceed as follows 1 Turn the vacuum OFF and unplug from electrical outlet 2 Check the vacuum for the source of overheating problem i e full dirt tank dirty filters or clog 3 Fix the problem by followin
8. ater 6 To replace filter insert into top portion of vacuum Clearing clogs Low suction or poor pickup may be due to a clog in the vacuum If this occurs the LED full dirt tank indicator light will turn yellow and indicate airflow is restricted If there is no suction or if suction is reduced at the hose follow these steps to clear the clog 1 Unplug vacuum from electrical outlet 2 Check the filter and clean as necessary see cleaning your filters above and on page 10 3 Check to see if dirt tank is full Empty if needed 4 Check wet dry or blower outlet for clogs If the clog is contained near the top of the hose close to the unit follow these steps 1 Attach hose to the wet dry inlet and turn the power on 2 This should dislodge the clog by sucking in debris Bissell www bissell com 800 237 7691 11 ug110 4053_18P0_608 indd 11 6 13 08 12 35 32 PM Maintenance and care Clearing clogs continued If the clog is contained near the bottom of the hose close to where tools are attached follow these steps 1 Remove wand or tool 2 Attach hose to the blower outlet and turn the power on 3 This should dislodge the clog by blowing out debris If the above methods are not successful find the clog by hand then squeeze the hose and shake until the debris dislodges Tool maintenance Keep tools clean and free of debris 1 Wipe tools clean with damp cloth Note The multi surface fl
9. ft slot is wider than right Unplug from outlet when not in use and before conducting maintenance A WARNING To reduce the risk of fire electric shock injury Do not modify the polarized plug to fit a non polarized outlet or extension cord Do not leave vacuum cleaner unattended when it is plugged in Unplug from outlet when not in use and before servicing Use indoors only Do not allow children to operate vacuum cleaner or use as a toy Close attention is necessary when used by or near children Do not use for any purpose other than described in this user s guide Use only manufacturer s recommended attachments Do not use with damaged cord or plug If appliance is not working as it should has been dropped damaged left outdoors or dropped into water have it repaired at an authorized service center HM Do not pull or carry by cord use cord as a handle close a door on cord or pull cord around sharp edges or corners Do not run appliance over cord Keep cord away from heated surfaces HM Do not unplug by pulling on cord To unplug grasp the plug not the cord HM Do not handle vacuum cleaner or plug with wet hands HM Do not put any object into openings Do not use with any opening blocked keep openings free of dust lint hair and anything that may reduce air flow MM Keep hair loose clothing fingers and all parts of body away from openings and moving parts www bissell com ug110
10. g the steps in the maintenance section of the user guide Face plate Green LED light The LED power will turn on when unit is turned on Yellow LED light The LED full dirt tank indicator will turn on when dirt tank needs emptying Red LED light The LED full water tank indicator will turn on when water level is too high Using the tools Make sure the tools are secure to the hose or wand before using Ki 1 Attach extension wand to end of hose by pushing it firmly onto the hose 2 Attach additional wand or tool if desired by firmly inserting onto the wand 3 Use the hose and wand alone or attach any of the tools to the end of the hose wand Accessories 32 ft Flexible crush proof hose Hose holder Accessory caddy Mounting bracket ie A 8 Bissell www bissell com 8 800 237 7691 R L ug110 4053_18P0_608 indd 8 6 13 08 12 35 31 PM Operation Floor cleaning 2 Extension wands O Use with desired attachment for a longer reach Large area cleaning tool Use on large surfaces for maximum pick up Multi surface floor tool May be used on both carpet rugs or hard floor surfaces For use on carpets make sure the tab is Carpet Hard Floor in the down position This will hide the soft outer brushes For hard floor surfaces press the opposite tab in the down position This will engage the soft outer brushes Upholstery cleaning Crevice tool May be used for both dry vacuum
11. ing or wet cleaning in tight spaces and corners Dusting brush Use soft bristles for dusting vehicle interior Small upholstery tool 5 tool may be used for small quick pick ups Car detailing Precision suction tool 3 tool may be used for cleaning your vehicle Precision blower tool May be used to blow air to get rid of unwanted debris in tight spaces 3 Small medium and large detailing tools May be used to clean small crevices and edges in your vehicle Emptying the dirt tank Empty the dirt tank after every use If red light indicates empty dirt tank 1 Unplug the unit from the electrical outlet Unclip the dirt tank handles while holding the bottom portion of the vacuum Empty over trash can 2 Reattach the dirt tank to the main unit by aligning the top of the dirt tank to the upper portion of the vacuum Use one hand to hold the tank and use the other hand to clip the handles to hold the tank securely Bissell 9 www bissell com Ze 800 237 7691 ug110 4053_18P0_608 indd 9 6 13 08 12 35 32 PM Maintenance and care Cleaning the dirt tank 1 Unplug the unit from electrical outlet 2 Remove the dirt tank by pulling up on both handles to unlatch 3 Ensure the dirt tank has been emptied 4 The dirt tank may be washed in warm water Make sure it is completely dry before reassembling 5 Reattach the dirt tank to the main unit by aligning the top of the dirt tank to the upper portion
12. is model is for household use only 800 237 7691 3 6 13 08 12 35 27 PM Product view Face Plate tt a Power Switch CR 8 B GE PRO Blower Hose Outlet Muffler Power Cord Dirt Tank Handles Dirt Tank 4 Bissell www bissell com A 800 237 7691 ug110 4053_18P0_608 indd 4 6 13 08 12 35 28 PM Assembly Your unit will require no tools to put together 1 Remove the dirt tank by pulling up on both handles to unlatch Lift upper half of unit to remove 2 Remove all accessories and parts stored in the bottom of the tank prior to use 3 Ifthe round funnel comes out of dirt tank set back inside the dirt tank before reas sembling vacuum 4 To reassemble place the top of the unit on the dirt tank so the edges fit together and latch handles to secure top and bottom of unit 5 Mount to wall see instructions below Mounting amp installation Only use when properly mounted on the wall When mounting to a stud use the 3 center holes Mounting on drywall or plaster wall with stud fasteners included 1 Locate a stud in your dry wall and drill a 1 8 pilot hole 2 Mount the bracket with a 10 16 x 1 3 4 screw starting at the center hole 3 Ensuring your bracket is aligned correctly with the stud drill a second pilot hole using the next hole as a guide Securely fasten with a screw 4 Repeat step 3 for remaining hole Note Mount near a wall outlet making sure
13. mer Services to locate a BISSELL Authorized Service Center in your area If you need information about repairs or replacement parts or if you have questions about your warranty contact BISSELL Consumer Services Website or E mail www bissell com Use the Customer Services tab Or Call BISSELL Consumer Services 1 800 237 7691 Monday Friday 8 a m 10 p m ET Saturday 9 a m 8 p m ET Or Write BISSELL Homecare Inc PO Box 3606 Grand Rapids MI 49501 ATTN Consumer Services BISSELL HOMECARE INC IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT BISSELL S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER yy N ORAL OR WRITTEN ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION Bissell OF LAW INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 9 FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE TWO YEAR DURATION R FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE Some states do not allow limitations on how long an implied warranty lasts so the 2008 BISSELL Homecare Inc above limitation may not apply to you Grand Rapids Michigan All rights reserved
14. ng holder from screw and insert 2 1 2 screw in bottom hole of hose holder to finish mounting 3 Wrap hose around holder Z WARNING 0 peration Do not remove plastic covering on Power switch power switch The power switch is located on the top left side of the vacuum To turn vacuum on 1 press up To turn vacuum off 0 press down Power N 6 www bissell com 800 237 7691 ug110 4053_18P0_608 indd 6 6 13 08 12 35 29 PM Operation Wet or dry vacuuming mode 1 Attach hose to the wet dry hose inlet opening located on the front left side of the unit by pushing fitted end of hose and turning clockwise until you feel it is secure Attach extension wand if desired to end of hose by pushing it firmly into the hose Attach additional wand or tool if desired by firmly inserting onto the wand Plug in the unit and push the power switch up to begin vacuuming Blower mode 1 Attach hose to the blower hose outlet opening located on the right side of the unit on top of muffler by inserting fitted end of hose and turning clockwise until it is locked in and secure Attach extension wand if desired to end of hose by pushing it firmly into the hose Attach additional wand or tool if desired by firmly inserting onto the wand Plug in the unit and push the power switch up to begin blowing Safety device 1 The vacuum has a protection device to automatically power off when the t
15. of the vacuum Use one hand to hold the tank and use the other hand to clip the handles to hold the tank securely Cleaning the filters The filter should be checked every 15 30 days and washed as needed to maintain performance Frequency of cleaning will be based on individual use Primary filter 1 Unplug the unit from electrical outlet 2 Remove the dirt tank by pulling up on both handles to unlatch 3 The filter is located inside the top portion of the vacuum Pull either black tab towards the middle of the unit and remove 4 Shake filter over trash can to release any loose debris 5 Use a damp cloth to wipe the inside and outside of the filter if desired Air dry thoroughly before replacing 6 To replace hold one edge of the filter collapse and snap in 7 Reattach the dirt tank to the main unit by aligning the top of the dirt tank to the upper portion of the vacuum Use one hand to hold the tank and use the other hand to clip the handles to hold the tank securely 10 www bissell com EN 800 237 7691 ug110 4053_18P0_608 indd 10 6 13 08 12 35 32 PM Maintenance and care Cleaning the filters continued Secondary filter 1 The secondary filter is located above the primary filter 2 To remove the primary filter see instructions on page 10 3 To remove the secondary filter pull filter down and out 4 Shake filter over trash can to release any loose debris 5 Rinse filter with warm w
16. oor tool contains a g i of red material that should not get wet If it needs cleaning wipe with damp cloth only SERVICING OF DOUBLE INSULATED APPLIANCE A double insulated appliance is marked with one or more of the following The words DOUBLE INSULATION or DOUBLE INSULATED or the double insulation symbol square within a square D In a double insulated appliance two systems of insulation are provided instead of grounding No grounding means is provided on a double insulated appliance nor should a means for grounding be added to the appliance Servicing a double insulated appliance requires extreme care and knowledge of the system and should be done only by qualified service personnel Replacement parts for a double insulated appliance must be identical to the parts they replace 12 www bissell com 800 237 7691 ug110 4053_18P0_608 indd 12 6 13 08 12 35 32 PM Troubleshooting Z WARNING To reduce the risk of electric shock turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or Vacuum cleaner won t turn on troubleshooting Possible causes Remedies 1 Power cord not plugged in 1 Check electrical plug 2 Blown fuse tripped breaker in home 2 Check replace fuse or reset breaker 3 Thermal protector activated 3 Allow cleaner to cool for 30 minutes see pg 8 This will reset thermal protector 4 Dirt tank is full of water 4 Empty tank and reattach 5
17. the cord provided will reach the outlet 5 Mount the unit by making sure the two square slots on backside of unit are sitting on the two hooks on the mounting bracket f Bissell www bissell com ae ug110 4053_18P0_608 indd 5 Use 3 Middle Holes To Mount Bracket Z WARNING Do not mount unit directly into dry wall ALWAYS locate a stud ATTENTION Make sure the end of the bracket with the smaller width faces up 800 237 7691 5 6 13 08 12 35 28 PM Assembly Mounting amp installation continued Concrete Wall fasteners not included You will need 4 3 8 x 2 1 4 concrete sleeve anchors Use 4 Outer Holed 1 Drilla 3 8 x 1 3 4 hole with a masonry drill bit 10 Mount an 2 Insert a bolt and anchor sleeve into the hole 3 Align the bracket over the hole and mark remaining hole locations using the 4 outer holes of the mounting bracket remove bracket and drill remaining holes Slots d Mount the bracket starting at top corner hole tightly securing sleeve anchor with hex nut 5 Repeat for three remaining holes 6 Mount the unit by making sure the two square slots on backside of unit are sitting on the two hooks on the mounting bracket Mounting the Hose Holder fasteners included 1 Determine desired location for hose holder and screw 1 1 4 screw into stud If mounting into drywall with no stud available use supplied drywall anchors 2 Ha
Download Pdf Manuals
Related Search