Beko D 7102E Washer User Manual
Contents
1. LG BEKO Floor Standing Type Air Conditioner OWNER S MANUAL MODELS unit must be submitted for approval by the 2 utility service which provides electricity LG BKE 9300 D EN 61000 3 Norm IMPORTANT Please read this owner s manual carefully and thoroughly before installing and operating your air conditioner Please retain this owner s manual for future reference after reading it thoroughly Floor Standing Type Air Conditioner Owner s Manual TABLE OF CONTENTS _ FOR YOUR RECORDS Safety Precautions 3 Write the model and serial numbers here Model Serial Operating Instructions 8 You can find them on a label on the side of each unit Dealer s Name Date Purchased Maintenance and Service 25 EH Staple your receipt to this page in the event you need it to prove date of purchase or for warranty issues je READ THIS MANUAL Inside you will find many helpful hints on how to use and maintain your air conditioner properly Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner You ll find many answers to common problems in the chart of troubleshooting tips If you review our chart of Troubleshooting Tips first you may not need to call for service at all PRECAUTION Contact the authorized service technician for repair or maintenance of this unit e Contact the installer for installati2. for 2 to 3 hours the air conditioner Type of operation Cooling Temperature setting 30 C This will dry out the internal mechanisms 2 Remove the batteries from the Remote Control 4 Be sure that nothing obstructs the air outlet S Turn off the circuit breaker and intake vents N CAUTION Turn off the circuit breaker when the air conditioner is not going to be used for a long time Dirt may collect and may cause a fire Operation Tips Keep blinds or curtains closed Keep the room temperature uniform This is not good for your health and Do not let direct sunshine enter the room Adjust the vertical and horizontal airflow wastes electricity when the air conditioner is in operation direction to ensure a uniform temperature in the room eee ae the doors and windows Clean the air filter regularly Ventilate the room occasionally are shut tight i A Blockages in the air filter reduce the Since windows are kept closed it is a Avoid opening doors and windows as airflow and lower cooling and good idea to open them and ventilate the much as possible to keep the cool air in dehumidifying effects Clean at least once room now and then the room every two weeks Owner s Manual 25 Maintenance and Service Check the following points before requesting repairs or service If the malfunction persist please contact your dealer Case Explanation See page Does not operate Have you mad
3. when refrigerant leakage after ensure that water is drained installing the product installation or repair of product away properly e Low refrigerant levels may cause A bad connection may cause e To avoid vibration or water leakage failure of product water leakage Do not install the product where the Use two or more people to Do not install the product where noise or hot air from the outdoor unit lift and transport the it will be exposed to sea wind could damage the neighborhoods product salt spray directly e t may cause a problem for your e Avoid personal injury e It may cause corrosion on the product Corrosion particularly on the condenser and evaporator fins could cause product malfunction or inefficient operation neighbors E Operation Do not expose the skin directly to cool air for Do not use the product for special purposes such as long periods of time preserving foods works of art etc It is a consumer air Don t sit in the draft conditioner not a precision refrigeration system This could harm to your health There is risk of f 3 Say damage or 2 WD loss of property Za ER SER VE Fe y S 4 Yek 4 d 6 Floor Standing Type Air Conditioner Do not block the inlet or outlet of air flow solvents etc e It may cause product failure Do not step on or put anyting on the product outdoor units There is risk of personal injury and failure of produc
4. will operate in mid fan speed on cooling mode NOTE A During the JET COOL function at any moment the A C starts to blow the cool air at extremely high speed setting the room temp automatically to 18 C It is especially used to cool the room temp in the shortest time in a hot summer In heat pump mode or neuro fuzzy mode however the JET COOL function is not available A In order to return to the normal cooling mode from the JET COOL mode you just press either the operation mode selection button airflow volume selection or temp setting button or the JET COOL button again Owner s Manual 23 Operating Instructions Child Lock Op Press the fan speed button and High temperature setting buttons simultaneously for 3 conds The unit will respond with beep After 3 second After 3 seconds it will shift it will shift 2 During Child Lock Operation Whenever you press any Button on Display Panel it will immediately display La which means Display panel is Locked All the Button on the indoor unit Display panel will not work But the Button on the remote controller will work 3 For releasing child lock Operation Press the fan speed button and High temperature setting buttons simultaneously for 3 conds The unit will respond with beep Child Lock Operation will removed After pressing After 3 seconds the buttons it will shift it will shift immediately Auto restart In case the power comes on again af
5. Stop Button Select Cooling Operation Press the Operation Mode Selection Button Press the Cooling Operation Button on the remote controller Set the temperature lower than the room temperature The temperature can be set within a range of 16 C 30 C by 1 C 7 To raise the temperature To lower the temperature Q Each time the Fan Speed Button is pressed the Fan Speed mode is shifted in the arrow direction Owner s Manual 15 Operating Instructions Select Soft Dry Operation Press the Operation Mode Selection Button Press the Soft Dry Operation Button on the remote controller OM COL LIB Set the temperature lower than the room temperature The temperature can be set within a range of 16 C 30 C by 1 C 7 To raise the temperature 7 To lower the temperature During softy Dry Operation e The indoor fan speed is automatically set to low and can be set fan speed 16 Floor Standing Type Air Conditioner Operating Instructions Press the Start Stop Button Select heating Operation Press the Operation Mode Selection Button Press the heating Operation Button on the remote controller Set the temperature upper than the room temperature The temperature can be set within a range of 16 C 30 C by 1 C TEMP a Teve To raise the temperature p To lower the temperature Q Each time the Button is pressed the Fan Speed mode is shifted Owner s Manual 17 Operating In
6. e a mistake in timer operation Has the fuse blown or has the circuit breaker been tripped e Is the power Switch at Off e Is the unit at the starting of Heating Operation If yes Hot start is activating e Is the unit in the Deicing If yes wait for finishing the Deicing The room has a peculiar odor e Check that this is not a damp smell exuded by the walls carpet furniture or cloth items in the room It seems that condensation is leaking from the air conditioner Condensation occurs when the airflow from the air conditioner cools the warm room air Air conditioner does not operate for about 3 minutes when restarted This is the Protection device of the air conditioner e Wait about three minutes and operation will begin e If the airflow begins before its temperature become warm it will cause an undesired cooling effect In order to prevent this the airflow will not begin until it is sufficiently warm Does not cool or heat effectively The air conditioner operation is noisy e Is the air filter dirty See air filter cleaning instructions The room may have been very hot when the room air conditioner was first turned on Allow time for it to cool down Has the temperature been set incorrectly e Are the indoor unit s air inlet or outlet vents obstructed For a noise that sounds like water flowing This is the sound of freon flowing inside the air conditioner un
7. is risk of fire or electric shock product There is risk of fire or shock electric shock TA Install the panel and the Always install a dedicated Use the correctly rated cover of control box circuit and breaker breaker or fuse securely There is risk of fire or electric Improper wiring or installation e There is risk of fire or electric shock may cause fire or electric shock shock al A Fe a fe Owner s Manual 3 Safety Precautions Do not modify or extend the Do not install remove or re Be cautious when unpacking power cable install the unit by yourself and installing the product customer There is risk of fire or electric There is risk of fire electric Sharp edges could cause injury shock shock explosion or injury Be especially careful of the case edges and the fins on the condenser and evaporator For installation always contact the Do not install the product on a Be sure the installation area dealer or an Authorized Service Center defective installation stand does not deteriorate with age e There is risk of fire electric e It may cause injury accident or e If the base collapses the air shock explosion or injury damage to the product conditioner could fall with it causing property damage product failure and personal injury E Operation Do not let the air conditioner run for a Take care to ensure that p
8. it For a noise that sounds like the compressed air releasing into atmosphere This is the sound of the dehumidifying water being processed inside the air conditioning unit Remote controller display is faint or no display at all 26 Floor Standing Type Air Conditioner Are the batteries depleted e Are the batteries inserted in the opposite and directions
9. n batteries could cause burns or other health hazards MO Ji pA a E EN gt VS Owner s Manual 7 Operating Instructions B Operating Instructions 1 Design for cooling and heating 6 2 cooling heating speeds 2 Super energy efficiency 7 Removable air filter 3 Micom control 8 Anti Bacteria filter 4 Whisper quiet operation 9 3 minutes delay circuit 5 Wireless remote control Air Outlet Vent Air Intake Vent Rear Remote Signal Receptor Air Outlet Vent Air Intake Vent Piping 8 Floor Standing Type Air Conditioner Operating Instructions Indoor Unit Contr Owner s Manual 9 Operating Instructions 1 5 6 START STOP BUTTON Operation starts when this button is pressed and stops when the button is pressed again OPERATION MODE SELECTION BUTTON Used to select the operation Mode ROOM TEMPERATURE SETTING BUTTONS Used to select the room temperature INDOOR FAN SPEED SELECTION Used to select fan speed in two steps low med HEATER OPERATION BUTTON AIR CLEANER OPERATION LAMP FAN OPERATION LAMP COOLING OPERATION LAMP 8 SOFT DRY OPERATION LAMP HEATING OPERATION LAMP 10 Floor Standing Type Air Conditioner 10 DEFROST OPERATION LAMP 11 OFF TIMER OPERATION LAMP 12 OUTDOOR UNIT OPERATION LAMP 13 ELECTRIC HEATER OPERATION LAMP Operating Instructions Remote Controller fo Owne
10. on of this unit e The air conditioner is not intended for use by young children or invalids without supervision Young children should be supervised to ensure that they do not play with the air conditioner e When the power cord is to be replaced replacement work shall be performed by authorized personnel only using only genuine replacement parts e Installation work must be performed in accordance with the National Electric Code by qualified and authorized personnel only 2 Floor Standing Type Air Conditioner Safety Precautions B Safety Precautions To prevent injury to the user or other people and property damage the following instructions must be followed E Incorrect operation due to ignoring instruction will cause harm or damage The seriousness is classified by the following indications f WARNING This symbol indicates the possibility of death or serious injury A CAUTION This symbol indicates the possibility of injury or damage E Meanings of symbols used in this manual are as shown below i SQ Be sure not to do Be sure to follow the instruction AWARNING E Installation Do not use a defective or For electrical work contact Always ground the product underrated circuit breaker the dealer seller a qualified Use this appliance on a electrician or an Authorized dedicated circuit Service Center There is risk of fire or electric Do not disassemble or repair the There
11. ower Do not place anything on the long time when the humidity is very high cable could not be pulled out or power cable and a door or a window is left open damaged during operation e Moisture may condense and wet There is risk of fire or electric e There is risk of fire or electric or damage furniture shock A 2 Do not plug or unplug the Do not touch operate the Do not place a heater or power supply plug during product with wet hands other appliances near the operation power cable e There is risk of fire or electric There is risk of fire or electrical There is risk of fire and electric shock shock shock 4 Floor Standing Type Air Conditioner Do not allow water to run into electric parts e t may cause There is risk of fire failure of the product or electric shock When flammable gas leaks turn off the gas and open a window for ventilation before turn the product on Do not use the telephone or turn switches on or off There is risk of explosion or fire Do not open the inlet grill of the product during operation Do not touch the electrostatic filter if the unit is so equipped There is risk of physical injury electric shock or product failure Q H i Do not store or use flammable gas or combustibles near the product e There is risk of fire or failure of product If strange sounds or small or smoke comes from product Turn the b
12. r s Manual 11 Operating Instructions 1 Signal Transmitter Transmits the signals to the floor standing type air conditioner 2 Operation Display of the Remote Control 3 Indoor Fan Speed Selection Button To select the desired fan speed in two steps Low Mid 4 Cooling ON Button 5 Temperature Setting Buttons 6 Power ON OFF Button Operation will start when this button is pressed and stop when the button is pressed again 7 Auto Airfloor Direction Control Button The horizontal louvers swing up and down 8 Auto Airflow Direction Control Button The vertical louvers swing left and right 9 Heating Button Heat Pump Model 10 Plasma Air purifying Button 11 Timer Set Button Each time the button is pressed the mode is changed in the following process Time set 1 2 3 4 5 6 7 hours If you select 0 the off Timer function will be cancelled 12 Soft Dry Operation Button 13 JET Cool Operation Button If you select JET Cool Operation Button display shows Po 14 Auto Air Flow Operation Button No application 15 Electric Heater On Off Button Heat pump amp Heater Model only Wireless Remote Control Puts all functions at your fingertips Handling the remote control Aim at the signal receptor on the floor standing type air conditioner when operating The remote control signal can be received at a distance of up to about 7meters Be sure that there are no obstructions between the remote control and the
13. reaker off or disconnect the power supply cable e There is risk of electric shock or fire When the product is soaked flooded or submerged contact an Authorized Service Center e There is risk of fire or electric shock Safety Precautions Do not use the product in a tightly closed space for a long time e Oxygen deficiency could occur Stop operation and close the window in storm or hurricane If possible remove the product from the window before the hurricane arrives There is risk of property damage failure of product or electric shock Be cautious that water could not enter the product e There is risk of fire electric shock or product damage Ventilate the product from time to time when Turn the main power off when cleaning or operating it together with a stove etc e There is risk of fire or electric shock maintaining the product There is risk of electric shock Owner s Manual 5 Safety Precautions When the product is not be used for a long Take care to ensure that nobody could step time disconnect the power supply plug or on or fall onto the outdoor unit turn off the breaker e There is risk of product damage or failure or This could result in personal injury and product unintended operation damage en 3 ACAUTION E Installation Always check for gas Install the drain hose to Keep level even
14. signal receptor Do not drop or throw the remote control Do not place the remote control in a location exposed to direct sunlight or next to a heating unit or other heat source 12 Floor Standing Type Air Conditioner Operating Instructions Remote Co 1 How to mount onto a wall Use the screws to secure the holder to the wall or attach the holder side of indoor unit How to insert batteries 1 Remove the cover from the back of the e Do not use rechargeable batteries remote controller such batteries as different from e Slide the cover according to the arrow standard dry cells in shape direction dimensions and performance 2 Insert two batteries t e Change the batteries with a new Be sure that the and directions are one if the remote control does not correct work properly after using for an Be sure that both batteries are new extended length of time 3 Re attach the cover F amp F Slide the cover into back position Owner s Manual 13 Operating Instructions How to use the Each time the Operation Mode Selection Button is pressed the Operation Mode is shifted in the arrow direction Cooling Operation Soft Dry Operation Heating Operation How to use the Each time the Fan speed Button is pressed the Fan speed is shifted in the arrow direction 14 Floor Standing Type Air Conditioner Operating Instructions Cooling Operat Press the Start
15. structions Select Auto Operation Press the Operation Mode Selection Button Press Auto Operation Button Set the temperature upper or lower than the standard temperature The temperature can be set within a range of by 1 level 2 2 al Ae ae U Cold Cool Proper Warm Hot This indication will be shifted to the initial Auto Mode Display state after 4 seconds 8 A To raise the temperature When you feel too cool or cold Q Um To lower the temperature When you feel too warm or hot During Auto Operation e It is impossible to switch the indoor fan speed because of being already set to the best conditioner by fuzzy rule 18 Floor Standing Type Air Conditioner Operating Instructions Select heating Operation by pressing the Opertion Mode Selection button Press the Heater Operation Button on the remote controller Set the temperature upper than the room temperature The temperature can be set within a range of 16 C 30 C by 1 C To raise the temperature To lower the temperature Q Each time the Button is pressed the Fan Speed mode is shifted Owner s Manual 19 Operating Instructions 3 Press the Timer Button wo e If you select 1 the Off Timer function will be cancelled 5 During off timer operation if you press the Timer Button the rest time will be displayed 20 Floor Standing Type Air Conditioner Operating Instructions Operation will star
16. t damage fs Y 9 Do not drink the water drained from the product e It is not sanitary and could cause serious health issues 17 injury Do not recharge or disassemble the batteries Do not dispose of batteries in a fire They may burn or explode Use a soft cloth to clean Do not use harsh detergents There is risk of fire electric shock or damage to the plastic parts of the product Always insert the filter securely Clean the filter every two weeks or more often if necessary e A dirty filter reduces the efficiency of the air conditioner and could cause product malfunction or Safety Precautions Do not touch the metal parts of the product when removing the air filter They are very sharp There is risk of personal injury Do not insert hands or other objects through the air inlet or outlet while the product is operated e There are sharp and moving parts that could cause personal injury Ds Use a firm stool or ladder when cleaning or maintaining the product e Be careful and avoid personal Replace the all batteries in the remote control with new ones of the same type Do not mix old and new batteries or different types of batteries There is risk of fire or explosion If the liquid from the batteries gets onto your skin or clothes wash it well with clean water Do not use the remote if the batteries have leaked The chemicals i
17. t when the button is pressed and stop when the button is pressed again Select Fan speed The display shows low fan speed at the initial condition You can operate the Plasma Air Purifying under the unit operation of cooling heating soft dry or Auto mode Air Purifying Operation with Cooling or any other Operateion 1 Press the Start Stop Button 2 Select the desired Operation Mode 3 Press the Plasma Air Purifying Operation ON OFF Button 4 Set the fan speed Owner s Manual 21 Operating Instructions Fan Operation Mode Press the Start Stop Button 3 Set the Fan Speed Operation will start when the button is pressed and stop when the button is pressed again 2 Press Fan Operation Button Q Each time the Button is pressed the Fan Speed mode is shifted Press the Auto Swing Button and then 2 louvers will swing left and right Press the Airflow Direction Control Button again to set the Vertical louver at the desired airflow direction The vertical louver swing left and right The horizontal louver swing up and down 22 Floor Standing Type Air Conditioner Operating Instructions Press the Start Stop Button On Off 2 Press the Jet Cool button to operate the speed cooling mode and the unit will operate in high fan speed on cooling mode 3 To cancel the Jet Cool mode press the Jet Cool button again or the fan speed button or the room temperature setting button and the unit
18. ter a power failure Auto Restarting Operation is the function to operate procedures automatically to the previous operating conditions 24 Floor Standing Type Air Conditioner Maintenance and Service CAUTION Before performing any maintenance turn off the main power to the system During the season Cleaning of the air filters Cleaning of the air cleaner Recommended about once every two weeks Recommended about once every three months 4 Remove the Air Filter Remove the Air Cleaner d Take hold of the tab and pull slightly forward to Take hold of the tab and pull slightly forward to remove the filter remove the air cleaner 2 Clean gy Clean To remove the dust adhering to the filters either use a Dip the air cleaner into the water mixed with vacuum cleaner or wash them in water and dry in the detergent for 20 30 minutes and dry in the shade shade Re insert the air cleaner to the original position Re insert the filter to the original position Cleaning of the air conditioner Never use any of the followings Don t wash with water e Water hotter than 40 C e Volatile substances e Wipe with a soft dry cloth Could cause deformation Could damage the surfaces and or discoloration of the air conditioner When the air conditioner is not go At the end of the season At the start of the season Operate the air conditioner at the following f Clean the air filters re insert then operate settings
Download Pdf Manuals
Related Search