Avaya 700217243 Telephone User Manual
Contents
1. 9 indicates the call was answered Zan indicates call was not answered EX If this symbol is displayed you are recommended to change the batteries 14 This symbol will be displayed when the unit is functioning with batteries 1633 16 digit field for displaying the telephone number En TOTAL AD 16 character alpha numeric display to show caller name or number of new calls and total calls received Setting the clock Lift Handset insert the 9V DC Adaptor supplied to the power socket or insert 3 AA Alkaline batteries 1 Key in the year month and day v v uii Ti MAA YEAR MONTH DATE 2 Press 1 for 12HR or Press 2 for 24HR 3 If 12HR selected Press 1 for AM or Press 2 for PM 4 Enter time hour amp minute 5 The display will show CLOCK STORED NOTE You do not need to perform this operation if you wait for your first call to be received clock will be set automatically to the correct time by the caller display signal If you want to reset date clock press STORE and H 15 Memory function There are four different memory stores on this telephone All of the memory locations will accept 32 digits and 16 alpha characters Directory You can store up to 100 telephone numbers and names in your personal directory By accessing a memory a call can be made by pressing the QQ button If an incoming call is received from someone whose name is stored i2. Following the provisions of Council Directive on radio equipment and telecommunications terminal equipment May 2004 Safety When using your telephone equipment the following safety precautions should always be followed to reduce the risk of fire electric shock and injury to persons Read and understand all instructions Follow all warnings and instructions marked on the telephone This telephone can be hazardous if immersed in water If you suspect a natural gas leak report it immediately but use a telephone away from the area in question Never push objects of any kind into the equipment through housing slots To reduce the risk of electric shock do not disassemble this telephone There are no user serviceable parts Avoid using the telephone during thunderstorms in your immediate area Installation Please refer to Figure One at the front of this user guide This telephone requires a power supply in order to operate correctly A suitable power supply is included with the telephone and it should be connected to the socket at the rear of the telephone Alternatively the telephone will operate utilizing 3 AA batteries not provided To insert the batteries first ensure that the telephone is disconnected from the telephone line This jack is used to connect a line cord to your telephone The handset cord plugs in here A headset plugs in here fal The jack labelled is used to conn
3. Information on the last 80 calls is retained in the telephone memory and it is possible to scan through these calls and dial someone back by simply pressing one button There is an independent directory for you to store the telephone numbers and names of 100 entries If one of your directory Names calls you then the display will show not only the number calling you but the name as stored in your directory or the IP OFFICE system memory As well as a directory of numbers it is possible to store up to 20 names and numbers in ten one and two touch buttons It is also possible to use this telephone in combination with a headset There is a universal interface in the telephone which will allow connection of most headsets providing that they have an RJ11 plug for connection to the headset socket situated at the back of the telephone Intended Use This apparatus is intended for use on the 2 wire analogue ports of the AVAYA IP OFFICE circuits in all countries except the USA Because the product is connected behind a PABX it must not be relied upon to contact the emergency services during a power failure Declaration of Conformity Avaya declares under its sole responsibility that this product Model Avaya Gemini CLI Phone 9335 AV Is in conformity with the following relevant harmonized standards Health amp Safety EN60950 Electromagnetic Compatibility EN55022 1998 amp EN55024 1998 Telecom EN301437 1999 amp TBR38 1998
4. Call Memory to Direct Access memory Press the button Press the A and Y button to select desired number from the Caller list Press and then press a memory button one or two touch memory button Follow the screen prompts at ENTER NUMBER prompt key in the number to be stored 20 Press at ENTER NAME prompt key in the name to be stored Press Deleting the Calls memory Press the button Press the A and button to select desired number from the Caller list that is to be erased Press sx button twice the call is erased There may be situations where you wish to delete the entire Calls memory Press the button Q Press x button twice in quick succession holding it down after the second press until the screen has displayed HOLD TO CLR CALL The screen displays CALL MEM CLEAR after all call memories have been erased Redial memory The redial buffer stores the phone number of the last five numbers that were called from the telephone either from the keypad or from a Direct Access memory 21 Viewing the Redial memories Press the 22 button The last number called on the telephone will be displayed with the telephone number and the message REDIAL 1 Using the A and Y buttons you can review the last five numbers called To call any of the numbers make sure that the entry required is on the screen and press the button The telephone will automatically call t
5. a number on the display This can be a call from your Directory A or an incoming call stored in the Call memory E or one of the calls in the Last Number Redial memory Press this button to insert a pause These 10 Direct Access memory buttons are able to save 20 memories each with a maximum of 32 digits and 16 alpha characters The memories are accessed by either one touch or two touches of the memory button x HHH Press this button during a call to return dial tone This will enable you to transfer the call to another party or instigate a feature such as conference Press this button to redial the last number you dialled from the keypad Using the A and Y buttons you can scroll through the last five numbers you dialled To call any of the numbers press the E button when the correct number is displayed on the screen 12 This button mutes the microphone so the other person on the call cannot hear you A red lamp indicates the mute is on Pressing it a second time releases the mute and returns you to normal conversation It works in Handset Handsfree and Headset mode This button will activate the two way Handsfree speech circuit Lifting the Handset will revert to Handset working Pressing the button when in Handset mode will switch to Handsfree allowing you to replace the Handset in the cradle without disconnecting the call in progress When a Headset is plugged in to the Headset
6. AVAYA Avaya Gemini CLI Analog Telephone 9335 AV General Note When power is switched on or batteries are inserted the display will be blank until the Handset is lifted or the Handsfree button is pressed Figure One O das di i 2 3 N HHH a AVAYA BEB DES 00004 a Yue oda Z DD Contents INTRODUCTION ae fil ee A eet 7 INTENDED USE nn etn cate as ana entah 8 SAFETY ann TA vd anna ana asa E a een 9 TELEPHONE FEATURES Sean Mena techs ema dann san asa 11 DISPLAY 41 ne a intan Ra MIN da 14 SETTING THE CLOCK dihuni an BAN an ain 15 MEMORY FUNCTION Ann nn an D Sena nana 16 DIRECTOR incida e 16 Programming DIFGClONY MEMONY
7. a 16 Dialling a Directory MEMO Y ee nn an nana AAA Sia aaa a 17 To delete a Directory Mmemory naaa Ka aaa aaa aaa daaa 17 DIRECT ACCESS MEMORY td AA ae unl ied tie ee 17 Programming Direct Access memory bUHONS aaa 18 Dialling Direct ACCESS memory buttons aaa 19 CALLES MEMORY AN been an BN AR nan an naa 19 DISPLAYING CALLS RECEIVED cccceesseeceeeeseceeeeceeeeeeaeeeeeeaaeeeeeaaeeeeeeaeeaaeeeeeeaaeeseeaeeeeeeiaeeeeeaes 19 To store a Call memory to Directory Memory aaa 20 To store a Call Memory to Direct ACCESS memory maaa 20 Deleting the Calls MeMOlV si a anna id 21 REDIAL MEMORY ai eae ede AAA BBA AA iae 21 Viewing the Redial memories ka Painan AE Na Na 22 SERVICE HEARING AID COMPATIBLE Ann dn aceite Jee alii neste A eee ett elves WARRANTY manten menenun nunung Banana a A nda e Introduction This AVAYA 9335 AV caller display telephone is specially designed to work behind the AVAYA IP OFFICE system The telephone is able to show caller display information provided that this option has been switched on by your installer When a call is received at the telephone it will display the number of the person calling you there are some exceptions to this like withheld numbers This information is stored together with information about the time date of the call and whether you answered the call or not
8. buttons providing 20 Direct Access memory locations each with a maximum of 32 digits and 16 alpha characters The memories are accessed by one touch or two touches of the Direct Access memory button ii 17 Programming Direct Access memory buttons To store a Direct Access memory Press the button STORE will appear on the display Press one of the Direct Access memory buttons 6 where you wish the memory to be stored NOTE if the button is pressed once the memory will be stored under the button as a one touch button If the memory button is pressed twice in quick succession the memory will be stored under the button as a two touch button At the prompt dial the number to be stored It is possible to store the Handsfree function 4 N as the first character In this case when a memory button is pressed the telephone will automatically seize the line and make the call in Handsfree mode Press the button at ENTER NAME prompt key in the name to be stored using the numeric keypad press the appropriate button a number of times to display the letter you require Press the to move the cursor to the next space use the lt P buttons to edit the name or A Y buttons to edit the number Press the button STORE COMPLETED will appear on the display If you make a mistake in entering the data simply overwrite the memory data by doing the entry again 18 Dialling Direct Access memory buttons Pressing any of t
9. ect a device such as a modem to your Telephone A 3 position switch is used to control the volume of the ring tone Select from loud ring quiet ring or ringer off x D 9 NS 232 25 Tn Turn the pitch control to adjust the pitch of the ringer El N TN Wall mounting An additional wall bracket is reguired Using the template supplied with the bracket position where you want to fix your telephone Drill two holes and fix roundhead screws Attach the telephone to the bracket Slide the bracket into place on the screws Remove the handset retainer by pushing up out of the slot Turn the retainer through 180 and place back in its slot Wall brackets can be obtained from your distributor or contact Avaya Analog support on 44 870 220 0402 www analogphonesavaya com 10 Telephone Features Please refer to Figure One at the front of this user guide The telephone is supplied with a protective cover over the display Carefully peel this off before using the telephone The large LCD panel normally shows the time of day and the number of new calls that you have not yet viewed With incoming calls or when viewing the directory or viewing the calls list it will show the date the number and the name of the caller if programmed into the directory or the IP OFFICE There are several prompts that also tell you what state the telephone is in at a particular moment in time
10. he Direct Access buttons Y once or twice will automatically display the number stored If the Handsfree Y N has been programmed into the memory then pressing the memory button will automatically dial the number If the number is displayed because the Handsfree function has not been stored pressing the E button will dial the number Calls memory Each call received up to a maximum of 80 calls can be stored in this memory The information stored includes telephone number and name if this information is stored in your personal or IP OFFICE directory date and time of call whether the call was answered or not Displaying calls received z O Ifthe 5 is flashing then there are new calls in the Directory that you have not viewed before Press button to display the last call to be received on the screen Using the A and Y button you can move up and down through the memories to see who has called If you wish to make a call to a particular caller make sure that the entry is on the screen and then press the button The telephone will automatically call the number in Handsfree mode 19 To store a Call memory to Directory Memo Press the button Press the A and Y button to select desired number from the Caller list Press and then press M Follow the screen prompts at ENTER NUMBER prompt key in the number to be stored Press at ENTER NAME prompt key in the name to be stored Press To store a
11. he number in Handsfree mode 22 Service Before cleaning unplug the telephone from the modular wall jack Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Hearing Aid Compatible This telephone is Hearing Aid Compatible HAC Warranty This product is guaranteed for 18 months from the date of manufacture To get warranty service on your telephone call the authorised service agent on 44 870 220 0402 Alternatively you may call the distributor from whom the product was purchased If you are directed to ship your telephone to the authorised service location you must do this at your cost We suggest that you retain the original packing material in the event you need to ship the unit When sending your telephone include your name address and phone number and description of the fault After repairing or replacing your telephone it will be shipped back at our expense Further information can be obtained from www analogphonesavaya com 23 3C9335001 AV
12. n the directory or in the IP OFFICE directory then that name will appear on your display together with the incoming callers telephone number Programming Directory memory To store a Directory memory Press then press D follow the screen prompts at ENTER NUMBER prompt key in the number to be stored Press at ENTER NAME prompt key in the name to be stored using the numeric keypad press the appropriate button a number of times to display the letter you require Press the Pr to move the cursor to the next space use the lt P buttons to edit the name or AVY buttons to edit the number The names will be stored in alphabetical order Press 16 Dialling a Directory memory To dial a Directory memory Press 4 You can then scroll through the complete directory by using the A and Y buttons Each memory will appear in alphabetical order Alternatively you can search for a particular letter by pressing LM followed by the alpha key for which you want to search press 6 once for M or twice for N for example All entries that begin with that letter will then be scanned using the A and Y buttons When you find the memory you require press the button to dial To delete a Directory memory Access the Directory memory to be deleted as described above Press the x button TWICE in quick succession ERASE will appear on the display and the memory will be deleted Direct Access memory There are 10
13. see detailed instructions on page 14 Use this button to delete a Directory memory Access the Directory memory to be deleted and press this button TWICE in quick succession ERASE will appear on the display and the memory will be deleted To adjust the volume of the Handset Headset and Handsfree Press the A and Y volume buttons Note The A and Y can also be used as Scroll Up or Down buttons to review the Redial Directory and the Caller memory list The Scroll buttons also serve as Edit buttons during memory storage Use this button to program the 100 telephone numbers and names in your Directory and the 10 Direct Access memory buttons 0 The red message waiting light flashes when you have a message lt also flashes when your telephone rings 11 6 mg O This light is to let you know that new calls have been received es which have not been reviewed Pressing this button will bring the calls information on the display and at the same time cause the LED to stop flashing and reset the NEW CALLS counter to 0 You can store up to 100 telephone numbers and names in your personal directory Use this button to access a memory a call can be made by pressing the button If an incoming call is received from someone whose name is stored in the Directory then that name will appear on your display together with the incoming callers telephone number Use this button to dial
14. socket Mi the Handsfree function is disabled to allow the button to operate the Headset aw 2 DAA A standard telephone keypad with the number 5 having a OOO raised dot for visually impaired users DO RESET If the telephone appears not to function correctly pressing this button will reset the telephone 13 Display ic Field TE NM 171 Numeric Field 2 2 Alpha Numeric NEW TIMER ANSWERED REPEAT DATE AM PM TIME ENVELOPE UNANSWERED CALL BATTERY Elo 88 88 Y 38 88 ADAPTOR Please refer to the drawing above NEW REPEAT CALL This is the received calls indicator NEW denotes calls not previously reviewed REPEAT indicates multiple calls from the same caller only the Date and Time from the most recent attempt will be displayed CALL indicates received Caller List entry number mon ey 4 Mat This is the Date field showing date in MONTH DAY format it shows the current date or date of received call TIMER This field indicates Time mode status AM TIMER indicates Call Timer or Stop Watch mode is active AM PM for clock display only displays in 12 hour mode R n 7 Displays the current time or the time of the received call in 2 5 HOUR MINUTE format It also displays the call timer and stop watch in MINUTE SECOND format at These symbols are used in conjunction with Caller list os
Download Pdf Manuals
Related Search