Astar electronic DVD-3800 DVD Player User Manual
Contents
1. MP3 Playback Advanced Features Supported formats Disc format ISO 9660 Joliet Music file format MP3 MP3 bit rate data rate 32 192 kbps Total number of music files and albums around 350 per disc Sampling rate CBR 32kHz 44 1kHz 48kHz 64kHz VBR 16kHz 22kHz 24kHz 32kHz MPEG Note The player will not identify or play MP3 discs under the following conditions recording format is not supported badly scratched or deformed disc MP3 recorded in CD R or CD RW which is not finalized or a dirty pickup When a MP3 disc is loaded the screen will display as follows Total tracks Elapsed time of the current track Current track Directory File name File window File A01 Press OQO to selectthe file when the cursor appears in the file window Press ENTER to play the current file selected by the cursor Press 10 gt to switch between the directory window and the file window Note During MP3 playback Forward Scan and Reverse Scan are not available 27 Remote Control Operation Advanced Features Front Panel and Rear Panel Illustration Introduction 9 0 6G 90 POWER VFD SCREEN PLAY PAUSE PREV SENSOR STOP NEXT CABIN DOOR REV OPEN CLOSE 9 FWD eoo Q O OOOO TOOGA lt o O LO Vidaoout Pscan Digital out 5 1 C2. 1 Open the cover S NS Make sure to match the and of the batteries with the marks inside the battery compartment 3 Close the cover pe T Notes Improper use of batteries may cause battery leakage and corrosion To operate the remote control correctly follow the instructions below Do not insert the batteries in the wrong dir ection Do not charge heat open or short circuit the batteries Do not throw batteries into a fire Do not leave dead batteries in the Remote Control Do not use different types of batteries tog ether or mix old and new batteries if you do not use the remote control for a long period of time remove the batteries to avoid possible damage from battery corrosion If the remote control does not function cor rectly or the operating range becomes re duced replace all batteries with new ones If battery leakage occurs clean the battery compartment then insert new ones 30 Other Using the remote control Point the remote control at the remote sensor The pictures below are for reference only Remarks Do not expose the remote sensor of the DVD Player to a strong light source such as direct sunlight Notes Point the remote control directly at the player s remote sensor Do not leave the remote control in an extremely hot or humid place Do not spill water or put anything wet on the remote control Battery l
3. se 42 1 Remote Control Operation Advanced Features TIME 9 s During playback press TIME and the Track Search menu will display as follows z ad Notes Time searches for an exact time in the movie In Title Chapter mode you cannot SELECT a value outside the range of the total number of titles or chapters For some DVD discs the Search function is unavailable Use the number keys to input the desired Time Title or Chapter then press ENTER to confirm Press TIME again the Disc Search menu will display as follows m 20 Modes and Features Setup Advanced Features SETUP y In stop mode press SETUP and the TV screen will display the Setup Menu as follows Language Video Audio MoreAud Rating Press GD to change items Setup Menu A Press ENTER to display each submenu B Press SETUP to exit the Setup Menu Select Language in the Setup Menu and press ENTER to display the Language submenu Language Video Audio Switch Rating English Press QU to select the menu item A Press ENTER or gt to set B Press to go back one menu C Press OR Ty repeatedly to return to the Setup Menu Select OSD Menu and press ENTER or DO to display the OSD Menu submenu Language Video Audio Switch Rating English English A Press ENTER to confirm B Press SETUP to exit the Setup Menu 13 Modes and Features Setup Introduction Remote C
4. 4 ASTAR DVD 3800 DVD PLAYER User Manual Please read this User Manual carefully to ensure proper use of this product and keep this manual for further reference Content Introduction 3 Safety PYGCAUITIOMS eise LL DD EE SES ed ER 2 M Important Safety Instructions m 3 E Caution EE 5 a Ea secre eter este Steg Se 6 Front Panel and Rear Panel Illustration cert tees 7 M Remote Control MH m m e e e eene 8 Connections B Connecting to a TV Sete Hee 9 BI Connecting to an AV Receiver with 5 1 Channel Analog Audio Input 10 Bi Connecting to an AV Receiver with Digital Audio Input 11 Basic Playback 5 Basic Operation Em 12 Advanced Features m Modes and Features Setup sete ee a 13 B Remote Control Opelation cie nte erint too nin orate dene eee 18 8 MP3 Playback ss 27 E KODAK Picture CD playback E 28 Others lll Troubleshooting eene 29 E Remote Control Preparation eee Hem eed 30 ET 31 in Macrovision ET orden ane de spa pete bete ne 31 Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THE LIGHTNING FLASH WITH ARRO WHEAD SYMBOL WITHIN AN EQUIL ATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESEN CE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE UNIT S CABI NET THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE ARISK OF ELECTRIC SHOCK TO PERSONS THE EXCLAMATION POINT WITHIN AN EQUILAT
5. ERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE SERVICING INSTRUCTIONS IN THE MANUAL ACCOMPANYING THE UNIT WARNING TO PREVENT FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE NEVER ATTEMPT TO OPEN THE CABINET DANGEROUS HIGH VOLTAGES ARE PRESENTED IN THE UNIT REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE PLUG WITH WIDE SLOT AND FULLY INSERT THE APPARATUS SHALL NOT BE EXPOSED TO WATER AND NO OBJECTS FILLED WITH LIQUID SUCH AS VASES SHALL BE PLAC ED ON THE APPARATUS Introduction CAUTION THE UNIT EMPLOYS ALASER SYSTEM TO EN SURE THE PROPER USE OF THE UNIT READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE IF THE UNIT REQUIRES SERVICING CONTACT THE SELLER OR SEE TROUBLESHOOTING TO PREVENT DIRECT EXPOSURE TO THE LASER RADIATION DO NOT OPEN THE CABINET VISIBLE LASER MAY RADIATE WHEN THE CABINET IS OPENED OR THE INTERLOCKS ARE DEFEATED DO NOT STARE INTO THE LASER BEAMS CAUTION THE DVD VIDEO PLAYER IS ACLASS 1 LASER PRODUCT USE OF CONTROLS OR ADJUST MENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE AS THE LASER BEAM USED IN THIS DVD VIDEO PLAYER IS HARMFUL TO THE EYES DO NOT ATTEMPT TO DISASSEMBLE THE CABINET REFER SERVICING TO QUALIFIED PERSONNEL ONLY WARNING FCC REGULATIONS STATE T
6. ETUP to save and exit Subwoofer Setting You must indicate in the menu system whether or not your audio setup includes a Subwoofer the 1in 5 1 sourround sound E Press SETUP to save and exit Rating Setup The Rating menu allows you to block playback of DVDs based on their ratings Setting the Password amp Rating Level The DVD player allows you to block playback of inappropriate content with a password protected Rating system not all discs are rated A From Stop mode press SETUP B Select Rating and press ENTER A From Stop mode press SETUP More Aud B Select More Audio and press ENTER EXIT C Select Subwoofer and press ENTER Pro Logic Auto D Select the desired Subwoofer setting and press Subwoofer Pinknoise ENTER DRC SA Off On default Indicates that you are using a Subw CNTR CTRL ae oofer for LFE low frequency effects signals REAR CTRL Oms LPCM 48KDS off Kid Safe Password Rating LOAD Factory Reset ir Hr nri rim PZIEUUUOZX C Select Rating and press ENTER repeatedly to set the rating from 1 most restrictive to 8 least restrictive If a password has already been set the lock icon will be closed You will not be able to select Rating until you SELECT the correct password using the 0 9 keys D Select Password E Use the 0 9 keys to SELECT a 4 digit password and press ENTER The lock icon will close to indicate that the rating and password are set F Pre
7. H SW output jack 5 1 CH CEN output jack 5 1 CH SUR output jack 5 1 CH FRONT output jack Video output jack Component output jack Digital signal coaxial output jack Digital signal optical output jack Go S Video output jack 26 27e Remote Control Introduction Remote Control Operation Advanced Features N P STANDBY OPEN CLOSE LANGUAGE SUBTITLE ANGLE DIGITAL BUTTON TIME PROG SETUP DISPLAY UP ENTER LEFT RIGHT DOWN TITLE MENU ZOOM PBC PAUSE STOP PLAY REV VOL FWD PREV NEXT VOL REPEAT SLOW A B RESUME STEP UR MUTE MODE RETURN Note 1 Please note that reference numbers for the remote are described beginning on page 18 of this manual 2 In this manual X1 gt Y will be used to represent different NAVIGATION ARROWS on the remote respectively Remote Control Operation Advanced Features Connecting to a TV Set Connections 5 1CH Audio out Video out Digital out Composite video WHITE YELLOW Component video for progressive scan VIDEO IN af VIDEO A S VIDEO VIDEO IN Notes There are three ways of connecting the player s AV output to the TV set 1 S video cable and left right audio cable set the Video Type to S Video 2 Composite video cable and left right audio cable 3 Component video cable and left right audio cable set the Video Type to Y Pb Pol ETE 9 Connecting to an AV Ampli
8. HAT ANY CHANGE OR MODIFICATION TO THE EQUIPMENT NOT EXPRESSLY APPROVED BY MAKER OR ITS AUTHORIZED PARTIES COULD VOID USER S AUTHORITY TO OPERATE THIS EQUIPMENT Specifications Other Power requirements 230V 50Hz Power consumption 15W Video standard NTSC PAL AUTO Unit Weight 2 35kg Video out Video out 1 0V p p 75 2 sync negative polarity RCA pin Jack x 1 S video output connector separate Y C signal output connector Y output 1 0V p p 752 sync negative polarity C output 0 286 V p p 75 9 Audio out 2channel out 1 85V rms 10k O0 RCA pin Jack L R x 1 5 1channel out RCA pin Jackx6 Coaxial out Optical 0 5V p p 759 RCApin Jack x 1 Frequency response 20Hz to 20kHz S N ratio gt 90dB Total harmonic distortion 0 0596 Accessories Video Audio cable x3 Remote Control x1 User s Manual x1 Specifications are subject to change without notice Weight and dimensions are approximate This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limitedviewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited a Remote Control Preparation Insert batteries j
9. Kodak Picture CD has the size and shape of a regular CD You can order a KODAK Picture CD simply by checking the box on the photo finishing envelope when you drop off a roll of film 35 mm or Advanced Photo System APS color print film at the time of processing in Kodak Express store displaying Kodak Picture CD sign When your order is returned you receive your prints negatives and your full roll of pictures safely stored on your KODAK Picture CD Each KODAK Picture CD brings you the tools to enhance share and manage your pictures on your computer You also can record the JPEG picture into CD R or CD RW with the CD Rewriter yourself Note 1 The Max Size of JPEG Picture can be supported 3840X3840 pels 2 JPEG stands for Joint Picture Experts Group It is the first International Standard on Still Picture Compressing ISO 10918 1 constituted by the Committee on Still Picture Compressing Standard of ISO The pictures on KODAK Picture CD are stored in this format JPEG This player can decode the JPEG pictures in KODAK Picture CD and playback the pictures in different modes Now you can playback Kodak Picture CDs on this player and view your wonderful pictures on your TV in the comfort of your living room When a Kodak Picture CD is inserted on a player an automatic slide show is launched Each picture in the Kodak Picture CD will be displayed consecutively in a slide show fashion and will be scaled to fit in the whole TV screen 28 Fe
10. TV E Set Digital Out to com AC3 OTHERS MP3 WMA Analog Out Digital Out PCM PPCM nos PCM Off PCM PCM 5 1 channel 2 channel 2 channel 5 1 channel 2 channel PCM default To output 2 channel digital from the optical coaxial digital audio outputs e g to a Minidisc recorder RAW To output the raw 5 1 channel digital bitstream form th optical coaxial digital audio outputs e g to an external amplifier with a Dolby Digital decoder Off To disable Dolby Digital decoder F Press SETUP to save and exit PCM stands for Pulse Code Modulation and is the standard 2 channel stereo format used for audio Cds MP3 Setting Follow these steps to set the outgoing digital audio format of MP3 tracks Note The analog format is fixed to 2 channel From Stop mode press SETUP Select Audio mode press ENTER Select MP3 and press ENTER Set Digital Out to PCM default To output 2 channel digital from the optical coaxial digital audio outputs eg Io a Minidisc recorder Off To disable MP3 digital output E Press SETUP to save and exit oom Others Setting Follow these steps to set the outgoing analog and digital audio format of others tracks From Stop mode press SETUP Select Audio and press ENTER Select Others and press ENTER Set Analog Out to 2 Channel default To output 2 channel stereo audio from the stereo audio output e g to a VCR or TV Set Digit
11. al Out from Optical Out to oom m AC3 MP3 WMA Others AC3 MP3 WMA Others Analog Out Digital Out 5 1 channel PCM 5 1 channel PCM dea P __PCM T jp channel 2 channel PCM 2 channel Analog Out Digital Out 5 1 channel PCM 5 1 channel PCM 2 channel PCM 5 1 channel 2 channel PCM default To output 2 channel digital audio from the optical coaxial digital audio outputs e g to a Minidisc recorder Raw To output the raw 2 channel digital bitstream form th optical coaxial digital audio outputs e g to an external amplifier Off To disable CD others audio output F Press SETUP to save and exit 16 Modes and Features Setup Advanced Features More Audio Setup The More Audio menu includes Pro Logic and Subwoofer settings Pro Logic Setting The DVD player has a built in Dolby Pro Logic decoder to provide virtual surround sound for PCM stereo source material from the 5 1 channel analog audio outputs A From Stop mode press SETUP B Select More Audio and press ENTER More Aud Aud C Select Pro Logic and press ENTER D Select the desired Pro Logic setting and press Pro Logic Of ENTER Subwoofer On Auto Stereo audio soundtracks will RDA ES en be output in Dolby Pro Logic mode CNTR CTRL Oms On All audio soundtracks will be output in REAR CTRL Oms Dolby Pro Logic mode LPCM 48KDS Off Off default Dolby Pro Logic decoding will always be inactive E Press S
12. atures Introduction Full compatibility with DVD CD MP3 Kodak Picture CD CD R and CD RW finalized Screensaver Dynamic spectrum display Coaxial amp Optical digital audio output S video composite video and component Y Pb Pr video outputs Disc formats supported by this player pie Dolby Digital ai DIGITAL Kodak COMPATIBLE MP3 MP3 files on CD R CD RW DVD video 8 VIDEO IR RESTRICTED Parental Lock 16 9 LB 6 9 Multi angle Closed Caption Subtitle choices Audio choices TV Aspect Ratio modes This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited The product complies with the KODAK Picture CD format and will display KODAK Picture CDs The KODAK Picture CD Compatible logo is atrademark of Eastman Kodak Company and is used with permission Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Confidential Unpublished Works 1992 1997 Dolby Laboratories Inc All rights reserved
13. ay the Video submenu Language Video Audio MoreAud Rating Press 7 O to 4 3 PS select the menu item A Press ENTER orL gt to set B Press to return to the Setup Menu Select TV shape and press ENTER or D to display the TV shape submenu Language Video Audio MoreAud Rating 4 3PS 4 3 PS Press CT Oto change your selection A Press ENTER to confirm B Press SETUP to exit the Setup Menu 4 3 PS Pan and scan refers to pictures where part of pictures is cut off so it fills the whole screen 4 3LB Letter Box refers to pictures where black bands appear at the top and bottom 16 9 The picture fills the screen of a wide screen 16 9 television Note Not all DVDs offer movies in Full Screen format If not the disc will override your TV Display setting and the movie will be displayed in Letterbox format Select TV system and press ENTER or D to display the TV system submenu Language Video Audio MoreAud Rating Press to change your selection A Press ENTER to confirm B Press SETUP to exit the Setup Menu NTSC Select if you are using NTSC signal system to match your TV set PAL Select if you are using PAL signal system to match your TV set AUTO Select if you are using AUTO signal system to match your TV set 18 215 Modes and Features Setup Advanced Features Select Video Output and press ENTER or D to display the Video Out submenu A Press ENTER to confirm B Pre
14. e antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 17 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result ina risk of fire or electric shock 18 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product Introduction 19 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 20 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions A When the power supply cord or plug is damaged B If liquid has been spilled or objects have fallen into the product C lf the product has been exposed to rain or water D If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an imprope
15. fier with 5 1 Channel Analog Audio Input RED S Video Coaxial Optical Digital out WHITE YELLOW Connections Notes 1 Set the TV to the AV input connected to the DVD player 2 Set the Amplifier to the AV input connected to the DVD player 510 Remote Control Operation Advanced Features While PROGRAM is on press ENTER to display the Program submenu D Others pat a Input the track numbers in the order you would like them to Program Input play When finished select Play Program and then press ENTER to play the tracks in the new programmed order 1 4 7 10 Select Clear All and press ENTER to clear all the numbers 2 5 8 11 you have input 3 6 9 12 Play Program Clear All Input the title number and the chapter number in the desired Program Input Title chapter order Then select Play Program and press ENTER to play 1 RUE NEA ERR TIS 110 the chapters in the order you have set eT DNO NND NOM Shen Select Clear All and press ENTER to clear all the numbers ONE CERE UN ORE S SUD E you have input Play Program Clear All Ty During playback is stopped Press MODE button to switch to S Video YUV YPbPr Note If you connect the DVD player to your TV using the component Video Output you can use the MODE button to Switch to progressi
16. g 13 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product Important Safety Instructions 14 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antennadischarge unit connection to grounding electrodes and requirements for the grounding electrode See figure below Ul C ELECTRIC SECTION 810 20 EQUIPMENT GROUND GROUNDING CONDUCTORS CLAMPS di NEC SECTION 810 21 POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC NATIONAL ELECTRICAL CODE NEC ART 380 PART H 15 Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power lines surges 16 Power Lines An outsid
17. ife is 1 year under normal conditions Important Safety Instructions 1 Read Instructions All the safety and operating instructions should be read before the product is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed Warnings All warnings on the product and in the operating instructions should be adhered to 4 Follow Instructions All operating instructions should be followed 5 Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 6 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards 7 Water and Moisture Do not use this product near water for example near a bathtub wash bowl kitchen sink or laundry tub in a Sr basement or near a swimming pool and the like 8 Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer 9 Portable Cart Warning A product and cart combination should be moved with care Quick s
18. nsure the disc format is compatible with the player Ensure the power plug is connected firmly to the Please check whether you have tried to play a software CD SES If so please restart the player PICTURE BUT NO SOUND REMOTE NOT WORKING Ensure the audio jacks are securely connected Ensure the remote batteries are working US EE ie nordamaged Point the remote control directly at the player s IR Ensure the volume is turned up in VOL CH setup sens r Ensure you have set the player s AUDIO settings correctly Remus any dbstaciss between tha tenu and Ensure you have ENTERed the correct AV input for your TV the IR sensor Ensure the audio is not set to mute SOUND BUT NO PICTURE UNIT NOT WORKING 9 Ensure the video jacks are securely connected Turn off the power and then turn it on again Ensure you have ENTERed the correct AV input for your TV Ensure the video connector is not damaged Ensure you have set the player s VIDEO settings correctly NO DISC DISPLAYED Ensure you have put the disc on the tray POOR PICTURE OR SOUND Ensure the disc is not upside down Ensure you have set the player s AUDIO settings correctly Ensure the disc is not distorted stained or Ensure the disc is not scratched or stained scratched Ensure the AV connector or the output terminal is not damaged 209 Kodak Picture CD Playback Advanced Features The introduction of KODAK Picture CD A
19. ontrol Operation Advanced Features Language Setup Select Subtitle and press ENTER or D to display the Subtitle submenu C Language Video Audio Switch Rating During playback press DISPLAY to display the current time counter position English English Press CT to change your selection Note Subtitle languages vary by disc A Press ENTER to confirm B Press SETUP to exit the Setup Menu Select Audio and press ENTER or CG to display the Audio submenu Elapsed time of the current track chapter Press DISPLAY again to display additional information about the playing disc Language Video Audio Switch Rating English Press U to change your selection English Note Audio languages vary by disc CD gt Other Disc type Elapsed time of the current track Total tracks Current track A Press ENTER to confirm R B Press SETUP to exit the Setup Menu Select DVD Menu and press ENTER or D gt to display the DVD Menu submenu Language Video Audio Switch Rating English Press U to change your selection Du Note Menu languages vary by disc Elapsed time of the current title English Disc type Current title Angle Audio type Current chapter Subtitle A Press ENTER to confirm B Press SETUP to exit the Setup Menu 19 EL Remote Control Operation Advanced Features Modes and Features Setup Advanced Features Select Video in the Setup Menu and press ENTER to displ
20. r adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation E If the product has been dropped or damaged in any way F When the product exhibits a distinct change in performance this indicates a need for service 21 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 22 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition 23 Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer 24 Heat The product should be situated away from heat Sources such as radiators heat registers stoves or other products including amplifiers that produce heat Troubleshooting Other If you have any questions please consult the troubleshooting guide below NO PICTURE OR SOUND BAD DISC DISPLAYED 9 Ensure the power button is on Ensure the disc is not warped damaged or deformed 9 Ensure the power outlet is operational Ensure the disc is not badly stained or damaged Ensure the power cord is not damaged E
21. ss SETUP to exit the Setup Menu Note The Composite video and S video output is always available S Video Select if you connected the DVD player to your TV using thecomposite Video output TV shape TV system 4 3 PS NTSC Video Output By j YUV Select if you connected the DVD player to your TV using the YUV output Y Pb Pr Select if you connected the DVD player to your TV using progressive scan Audio Setup YUV sof M YPbPr sal i Press CT Oto change your selection The Audio menu allows you to set the analog and digital audio outputs to correspond with the external components you have co nnected to the player For example if you connected the player to a TV using the Stereo Audio jacks you should set Dolby Digital and others settings to 2 channel to enjoy downmixed stereo audio e You can set the audio format for each of the following sources Dolby Digital MP3 CD and Others e DVD playback must be stopped in order to adjust the Audio setup AC 3 Setting Follow these steps to set the analog and digital audio formats of outgoing Dolby Digital 5 1 soundtracks From Stop mode press SETUP Select Audio and press ENTER Select AC 3 and press ENTER Set Analog Out to 6 Channel default To output Dolby Digital 5 1 channel audio from the 5 1 channel analog audio outputs e g to a 5 1 cha nnel amplifier 2 Channel To output downmixed 2 channel stereo from the stereo audio outputs e g to a VCR or
22. ss SETUP to save and exit Not all DVDs are rated DVDs that are rated higher than the level you select will not play without SELECTING the correct password If you forget your Rating password select 8888 to clear the memory Keep this pass word out of reach of children as if will always unlock the Parental Control setting 217
23. top excessive force and uneven surface may cause the product and cart combination to overturn n Symbol provided by RETAC Introduction 10 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 11 Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions 12 Grounding or Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plu
24. ve scan for superior video quality 108 Connecting to an AV Amplifier with Digital Audio Input Remote Control Operation Advanced Features 6 9 5 1CH Audio out Video out Digital out Optical cable Amplifier Q a zm 9 q895 jeixeoy Notes 1 Select the Coaxial digital audio output 2 Set the player s audio out to Raw or PCM mode 3 Set the Amplifier to the AV input connected to the DVD player SE EE Basic Operation Basic Playback Remote Control Operation Advanced Features Preparation before playing 1 Connect the DVD player to your TV and amplifier 2 Turn on the TV 3 Set the TV to the AV input connected to the DVD player 4 Turn down the volume on your amplifier and then power it on 5 Set the amplifier to the AV input connected to the DVD player DVD CD CD RICD RW DVD RIDVD RWIMPS HDCD UPEG PLAYER STEP 1 Press POWER to H i start the player The DVD j B logo appears on the TV hb screen K d i x STEP 2 Press OPEN CLOSE either on the front panel or remote control When the tray is opened place the disc on the tray with the label side up Press OPEN CLOSE again to close the disc tray STEP 3 Press the PLAY button on the front panel or remote con trol The player will automatical ly read and identify the disc and begin playback D
Download Pdf Manuals
Related Search