Home

AEG 86740 Washer User Manual

1. 30 Service Service In the section What to do if there is a list of some faults which you can remedy yourself Look there first if a fault occurs If you find no in formation there please consult your Customer Service Centre Always prepare in advance for the discussion By doing so you will sim plify the diagnosis and the decision on whether customer service is necessary Note the PNC number and the S number Both can be found on the rating plate on the inside of the door on your washing machine PNG cai S NO AR ee te Answer as precisely as possible e What form does the fault take e Under what circumstances does the fault occur Does the multi display show an error message AEG LAVAMAT XYZ 5 No000 000000 When do you incur costs even during the warranty period if you could have dealt with the fault yourself with the aid of the Faults Table see the section What to do if if several trips by the customer service technician are necessary be cause he had not received all the necessary information before his visit and must now e g fetch spare parts These multiple trips can be avoided if you prepare your phone call as described above 63 E From the Electrolux Group The world s No 1 choice The Electrolux Group is the world s largest producer of powered appliances for kitchen cleaning and outdoor use More than 55 million Electrolux G
2. Keep all parts of the transport safeguard in a safe place for possible later transport D P K SOS iN moving house 1 Open both hose holders on the rear of the unit and remove the EIA hoses and the mains cable 49 Setting up and connection instructions 2 Firmly pull both hose holders off the unit i The special button A and the plug caps B 2 ea and C 1 ea are supplied with the unit 3 Remove the screw D including the compression spring with the special button A 4 Close off the hole with the plug cap C Attention Push in the plug cap so firmly that it engages in the rear panel this protects the inside of the unit against splash water 5 Unscrew the two screws E using the special button A 6 Unscrew the four screws F using the special button A 7 Remove the transport rail G 8 Screw the four screws F back in 9 Close off the two large holes with the plug caps B Attention Push in the plug caps so firmly that they engage in the rear panel this protects the inside of the unit against splash water A Setting up and connection instructions Prepare the Installation Location e The installation surface must be clean dry and free of floor wax resi due and other lubricating coatings so that the unit does not slide away Do not use any lubricants as sliding aids e t is not recommended
3. 14 29 Frost hazard 6 40 G Gentle Spin cias 11 H Hand wash bep dais 11 30 In wash stain treatment 9 24 L Linen 17 29 31 M Multidisplay 10 25 26 35 63 0 Opening the door 23 27 37 41 46 OVer dosed iiis Ren 28 P Pre wash 12 20 24 29 Pre wash detergent 9 24 Program saving 23 Programme progress display 10 26 Programme security 27 46 Pumping out 11 27 R Rating plate 9 53 63 Refresh sto ated fe a tok dx 12 29 Rida SLE de 42 Rinse hold 11 21 27 RIMSING dd a at sess 11 31 S ATA RS 11 17 30 hand washable 11 30 A p RP 12 22 Soaking agent 9 24 Softener snene ares dene eae J 8 24 Solution pump 9 Spin 11 19 21 23 26 31 Stalhi rec Gia nt nd tan te dea 39 Stallis arde 13 20 29 Starching escitas apo 31 T TIMESI VE igi at 13 29 U Updates ra RP 15 W Warranty 6 35 57 Washitlme hits tad os 15 Washing detergent 9 18 Washing powder liquid 19 Water Hardness is ashi ee tet NES INR 8 18 pumping out 11 27 SOMO aio bt RES 8 9 18 24 Woollens 11 17 30 hand washable 11
4. Connection The washing machine has safety features which prevent contamination of the drinking water and which conform to the legal regulations of the water authorities e g for Germany DVGW regulations Other pro tection measures in the installation are therefore not necessary Attention Units for connection to cold water must not be connected to hot wa ter Use only new sets of hoses for connection Permissible Water Pressure The water pressure must be at least 1 bar 10N cm 0 1 MPa maxi mum 10bar 100N cm 1 MPa e In the case of more than 10bar Connect a pressure reducing valve upstream e n the case of less than 1 bar Unscrew the intake hose on the unit side on the inlet solenoid valve and remove the flow regulator to do this remove the filter with pointed pliers and remove the rubber washer behind Replace the filter 53 Setting up and connection instructions 54 Water Inflow Connect the hose with the angled connection to A pressure hose 1 5m in length is supplied If a longer inflow hose is required only a VDE approved complete set of hoses with fitted hose screw connections offered by our Customer Service is permissible Sets of hoses in lengths of 2 2 m 3 5m and 5m are available for washing machines without Aqua Control Sets of hoses in lengths of 2 0m 2 9 m and 3 9 m are available for washing machines with Aqua Control Attention Never cut int
5. REPASSAGE are avallable Delicates Y Textiles such as layered fibres micro fibres synthetics and Curtains with this care symbol need a caring handling For these types of washing the programme DELICATE FIJNE WAS LINGE DELICAT is suitable Viskose Modern textiles such as viskose cupro lyocell modal among others re quire a particularly caring handling For these types of washing the programme FASHION is suitable Wool Silk and specially delicate wash v Textiles such as wool wool mixtures and silk with this care symbolare particularly sensitive to mechanical loading For textiles of this sort the programme WOOL WOL LAINE handwash and SILK ZUDE SOIE amp y handwash are suitable Caution Textiles with care symbols SZ Do not wash must not be washed in the washing machine 17 Instructions for use Washing Detergents and Care Agents Which washing detergent and care agent Use only washing detergents and care agents which are suitable for use in washing machines Always follow the manufacturer s instructions How much washing detergent and care agent The amount to be used depends on e the dirtiness of the washing e the hardness category of the mains water supply e the filling quantity Ga If the detergent manufacturer gives no details of the dosing quantities for minimum loads add one third less for half loads and in the case of very small loads and for EASY IRON STRUKVRU SANS REPASS
6. RESTANT FIN GANE GS A EE 40 e TIME SAVE STARTIUDKEUZE OVERDOS a SU 40 CENTRIFUG ECO TIME DEPART DIFFERE SURDOSAGE FINE WAS ll kom Gee I LINGE DELICAT Multi display Button DELAY TIMER Programme knob The programme knob determines the type of the washing cycle e g water level drum move ment number of rinse cycles spinspeed depending on the type of washing to be handled as well as the water temperature OFF UIT ARRET switches the washing machine Off in all other positions the machine is switched On Button START PAUSE ENERGIEBESPAREN ECONOMIQUE STRIKVRIJ SANS REPASSAGE OPFRISSEN RAFRAICHIR O FASHION ZIJDE Soir WY KOUD UIT ARRET FROID SPOELEN WOL 30 Wc MaS LAINE 40 NL PORN CENTRIFUG 30 f A FIJNE WAS LINGE DELICAT ORT C Display OVERDOSING WITTE BONTE WAS SAL oe NIRIFUG ESSORAGE DELICAT For correcting accidentally selected programme settings turn the programme knob to the OFF position The washing machine returns to the Off condition again Instructions for use COTTONS LINEN EASY CARE WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE Wash programme from 20 C to95 C can be used universally for cot ton linen easy care e g cotton polyester and synthetics The washing programme adapts itself to the various types of types of weaves and amount of filling For most
7. consumer services department ELECTROLUX HOME PRODUCTS BELGIUM Bergensesteenweg 719 1502 LEMBEEK Tel 02 363 04 44 Customer services Customer services Belgium Electrolux Home Products Belgium ELECTROLUX SERVICE Bergensesteenweg 719 1502 Lembeek Province de Li ge S D E Rue Gaucet 26 4020 Liege Tel Consumer services 02 363 04 44 04 343 11 60 Fax 02 363 04 00 02 363 04 60 04 343 47 68 59 60 61 Index 62 Index A Aborting the programme 26 Additional programme buttons 12 29 Aqua Control 15 28 36 Automatic adjustment foot 9 52 C Care agent ec elr ee br clem 9 18 24 Child safety feature 35 47 Conditioner 9 11 19 31 Correcting the programme 10 COTOONS wesc su se assaut 17 29 31 Cottons linen easy care 11 29 Curtains celu rex eru 16 Customer service 15 33 35 59 63 D Delay timer 10 12 22 25 Delicates 11 12 17 30 Detergent 9 18 24 Detergent dispenser drawer 9 24 Drain pump 34 E Easy ION nme ROTER oe 12 30 37 A ioci Dar eb E 17 30 Emergency emptying 40 Emergency unlocking 41 Energy saving programme 12 29 F Fashi n esu cip Is 12 29 30 Filling quantity
8. to set up the washing machine on deep pile carpets or on floor coverings with soft foam underlays as this would mean that the stability of the unit would not be guaranteed e Use ordinary rubber mats as underlays in locations with small format tiles e Never use wood card or similar underlays to compensate for minor floor unevenness Always use the adjustable screw type feet of the machine e f for reasons of space it is not possible to avoid setting up the unit next to a gas cooker or coal stove Insert a thermally insulating panel between the washing machine and the cooker 85 x 57 cm This panel must have an aluminium foil on the side against the cooker e The washing machine must not be set up in a room where there is a danger of frost Frost damage e The intake and drainage hoses must not be bent or pinched Setting Up on a Concrete Pedestal When setting up the washing machine on a concrete pedestal it is essential for safety reasons to fit stand plates in which the washing machine is then adjusted The stand plates are available from the Customer Service under spare part number 645 425 058 O Setting Up on a Vibrating floor In the case of vibrating floors especially wooden beam floors with flex ible boards securely screw a water resistant wooden panel at least 15mm thick onto at least 2 of the floor beams If possible set up the unit in a corne
9. 1 pull drawer out up to the stop 2 Compartment for In wash stain treatment tabs only for additional programme STAINS VLEKKEN TACHES Compartment for powdered washing agent Tabs If you are using water softener and need the right hand compartment for the pre wash softening agent add the water softener to the main washing de tergent in this compartment Compartment for liquid care agent Softener shape rinse starch Caution Do not fill compartment above MAX mark Thick fluid medium possibly thin to MAX mark dissolve powdered starch Remarks A small amount of remaining water in the compartment for fluid care agent is normal and does not affect the rinse results Compartment for pre wash agent soaking agent only for additional programme PRE WASH VOORWAS PRELAV or for water softener Push drawer all the way in When using liquid washing agent Tabs liquid washing agent or Tabs with the dosing container provided by the detergent industry More instructions on the washing agent packing Instructions for use Starting the wash program t 1 Checking whether the water tap is open 2 Starting the wash programme Press the START PAUZE START PAUSE START PAUZE MARCHE PAUSE MARCHE PAUSE button The wash programme is started or starts after end of the set delay time If the DOOR LIGHT DEUR LICHT PORTE ECLAIR display lights up red when pre
10. AGE only half the amount of detergent recommended for a full load Refer to the detergent care agent manufacturer s instructions on use and dosage Water Softener For medium to high water hardness hardness category II or higher you should use water softener Pay attention to the manufacturer s instruc tions Always then meter detergent for hardness category soft The responsible water works can provide information on the local water hardness Ga Since the water softener is added before the main washing detergent water pre softening eighty percent of the softener quantity stated on the package is sufficient Water Hardness Details Sl h Water Hardness in mmol l Hardness Category eae atili par Hra soft 0 7 up to 1 3 Il medium hard 7 14 les 245 Ill hard 14 21 2 5 3 8 IV very hard over 21 over 3 8 Instructions for use Carrying out a wash cycle Brief instructions I 1 NO of 5 A wash cycle is carried out in the following steps Setting the correct wash programme Set programme and temperature with the programme knob If necessary select additional programme PossiblyChange spin speed select RINSE STOP GEEN CENTR SANS ESSOR Possibly set DELAY TIMER STARTTIJDKEUZE DEPART DIFFERE Open door put in washing Close door Washing Add conditioner Start the wash programme with the START PAUSE START PAUZE MARCHE PAUSE button After comple
11. E DELICAT 30 Synthetics WOOL WOL LAINE amp y Handwash 30 Filling Water Energy Time in quantity in in RES inkg Litres kWh 5 39 0 85 120 5 42 1 80 148 5 42 0 95 119 5 49 0 55 116 2 5 48 0 70 91 2 5 48 0 50 88 2 5 42 0 50 59 2 5 54 0 35 68 2 42 0 16 35 1 Remarks Programme setting for testing in accordance with or in similarity to EN 60 456 and IEC 60 456 Instructions for use Wash Time Display i The wash times for the wash programmes Leon depend on the usual washing practice and feu TEMS T the ambient conditions at the place of in stallation The washing type and quantity the type of washing detergent the water temperature and the room temperature etc can influence the duration of the wash programme What does UPDATE mean The wash programmes in your washing machine are controlled by soft ware New types of fabric or new detergents may require new wash pro grammes in the future In most cases the software can be adapted to this For further information on a possible update please contact customer service Water Protection Aqua Control Aqua Alarm In the event of damage to the supply hose the system blocks the fur ther supply of water to the unit directly st the water tap If water escapes elsewhere the drainage pump automatically pumps off even if the unit is switched off The washing machine merely has to be connected to the electricity mains When the water protection system
12. N RINCAGE will blink for 5 seconds Whilst RINSE SPOELEN RINCAGE blinks release DELICATE BE HOEDZAAM SENSITIVE button when the blinking has stopped the additional rinse cycleis set It is available until it is canceled again When the additional rinse cycle is set the RINSE SPOELEN RINCAGE display will be lit on the programme cycle display before programme start and during the additional rinse cycle If you want to check whether the additional rinse cycle is set Turn the programme knob to SHORT SPIN KORT CENTRIFUG ESSORAGE DELICAT Press the DELICATES BEHOEDZAAM SENSITIVE button briefly If RINSE blinks on the programme cycle display then the additional rinse cycle is set Instructions for use is 1 i Water cooling i is 1 2 Keep button DELICATES BEHOEDZAAM SENSITIVE depressed for at Whilst RINSE is lit up constantly release the DELICATES BEHOED Whilst MAIN WASH HOOFDWAS LAVAGE blinks Cancel additional rinse cycle Turn programme knob to SHORT SPIN KORT CENTRIFUG ESSORAGE DELICAT least 5 seconds Immediately on pressing the button RINSE SPOELEN RINCAGE blinks on the programme cycle display After 5 seconds RINSE SPOELEN RINCAGE will stop blinking and lights up constantly for a further 5 seconds ZAAM SENSITIVE button After RINSE SPOELEN RINCAGE has stopped lighting up the ad ditional rinse cycle is c
13. OKO LAVAMAT 86740 update The Environmentally Friendly Washing Machine User Information Dear customer Please read this user information carefully In particular pay attention to the section Safety on the first pages Keep this user information in a safe place for later reference Pass it on to any subsequent owners of the unit Points which are necessary for your safety or which are important for the unit s functional capability are highlighted by a warning triangle and or signal words Warning Caution Attention Always remem ber his symbol guides you step by step in operating the unit After this symbol you will find detailed information on operation and practical use of the unit The clover leaf indicates tips and information on the economical and environmentally responsible use of the unit This user information contains information on remedying any faults which may occur see the section What to do if If these instructions are not sufficient our After Sales Service is at your disposal at any time ELGROEP amp AEG SERVICE Bergensesteenweg 719 1502 Lembeek Tel 02 3630444 Here you will receive an answer to any question concerning the fea tures and use of your unit Of course we are also pleased to receive any requests suggestions and criticism Our aim is to further improve our products and services for the benefit of our customers In the event of technical problems our
14. RT SPIN programme g KORT CENTRIFUG ESSORAGE DELICAT Silk 1kg 31 Instructions for use 32 Cleaning and Care Control Panel iS Attention For cleaning panels and control parts do not use furniture polish or any aggressive cleaning agents Wipe off control panels with a damp cloth Use warm water to do this Washing Detergent Drawer I 1 2 Clean the softener insert under The washing detergent drawer should be cleaned from time to time Pull out the washing detergent drawer as far as it will go Remove the washing detergent drawer with a firm pull 3 Remove the softener insert from the middle compartment running water Clean the compartments from the rear with warm water It is best to use a bottle brush Push on the softener insert as far as it will go so that it is secure Instructions for use 7 Use a brush to clean the entire rinsing in part of the washing ma chine especially the nozzles on the top side of the rinsing in chamber 8 Insert the washing detergent drawer into the guide rails and push it in Washing Drum The washing drum is made of high quality stainless steel Rust deposits on the drum can occur due to foreign bodies in the washing which can cause rust Attention Do not clean the stainless steel drum with acidic antiliming agents scouring agents containing chlorine or iron or steel wool Our Customer Service Department has suitable age
15. SE but ton water is pumped out and the washing is spun according to the position of the programme with the RINSE STOP GEEN CENTR SANS ESSOR spin speed the speed of spinning can also still be changed during spinning or Turn Programme knob to PUMP POMPEN VIDANGE and press the START PAUSE START PAUZE MARCHE PAUSE button the water is pumped off without spinning or Turn programme knob to SPIN CENTRIFUG ESSORAGE or SHORT SPIN KORT CENTRIFUG ESSORAGE DELICAT and press START PAUSE START PAUZE MARCHE PAUSE button water is pumped out and the washing is spun or short spun After the end of this programme step the END EINDE FIN display lights up Open filling door As soon as the display next to the DOOR LIGHT DEUR LICHT PORTE ECLAIR lights green the door can be opened not when the pro gramme security is activated For this see Programme security Remove washing 4 Turn programme knob to OFF UIT ARRET 27 Instructions for use 28 1 5 After washing pull the washing agent drawer out a little so that it can dry out Lean door only against frame do that the washingmachine can vent out If the display OVER DOSING OVERDOS SURDOSAGE sUEDOS e lights up too much washing detergent was used in the washing program just ended During the next wash pay attention to the dosing information of the washing detergent manufacturer and pay attention to the fillin
16. STRUKVRU SANS REPASSAGE 40 REFRESH OPFRISSEN RAFRAICHIR 30 DELICATES FIJNE WAS LINGE DELICAT 30 40 FASHION 40 WOOL WOL LAINE amp y handwash COLD KOUD FROID to 40 SILK ZIJDE SOIE amp y handwash 30 possible Additional programmes PRE WASH VOORWAS PRELAV DELICATE BEHOEDZAAM SENSITIVE STAINS VLEKKEN TACHES TIME SAVE PRE WASH VOORWAS PRELAV STAINS VLEKKEN TACHES TIME SAVE PRE WASH VOORWAS PRELAV STAINS VLEKKEN TACHES TIME SAVE TIME SAVE 1 The load amount inquiry operates in accordance with the EN 60456 standard load 2 A 10 litre bucket holds around 2 5 kg of dry clothes cotton 3 Programme settings for checking according to or in similarity to EN 60 456 and IEC 60 456 are described in chapter consumption values and time require ments 4 Only by adhering to the filling quantity of 1kg about 5 to 7 men s easy care shirts will crease folds in the wash mostly be avoided Instructions for use Separate Rinsing Conditioner Starching Impregnation Max Filling quantity Type of washing Hire Programme knob RINSING SPOELEN RINCAGE Wool Hand wash 2k RINSE SPOELEN RINCAGE programme y button TIME SAVE Cotton Linen 5kg Separate Spinning Max Filling quantity Type of washing Programme knob dry weight Cotton Linen 5kg SPIN Easy care 2 5kg CENTRIFUG ESSORAGE Delicates 2 5kg Wool Hand wash 2k SHO
17. a short time as the washing programme adapts itself to the different conditions during washing e g type of washing or quan tity imbalance recognition during spinning special rinse cycle etc Changing speed of spinning During the wash programme the spin speed can still be changed or SPIN STOP GEEN CENTR SANS ESSOR can be set Other settings cannot be changed Abort programme For early aborting of the wash programme turn the programme knob to OFF UIT ARRET The programme can be interrupted at any time with the START PAUSE START PAUZE MARCHE PAUSE button and can be continued by means of a repeated pressing of the button Instructions for use Wash cycle ended Remove washing is 1 3 After the wash programme has been ended END EINDE FIN is dis played on the Programme cycle display e If programme EASY IRON STRIJKVRIJ SANS REPASSAGE has been selected then a crease guard programme of ca 30 minutes is carried out after the programme end The multi display then additionally shows a rest time of 1 minute and the display END EINDE FIN lights up During the crease guard programme the door can be opened at any time and the washing can be removed e f RINSE STOP GEEN CENTR SANS ESSOR has been selected the display next to the START PAUSE START PAUZE MARCHE PAUSE button blinks After a rinse stop the water must first be pumped out Either press the START PAUSE START PAUZE MARCHE PAU
18. ain any flammable solvents Also remem ber this when washing pre cleaned washing e Do not use the washing machine for chemical cleaning e Dyes dye removers may only be used in washing machines if the manufacturer expressly allows these products We cannot be held lia ble for any resulting damage e Use only water from the water mains Use rainwater or service water only if it meets the requirements outlined in DIN 1986 and DIN 1988 e Frost damage is not covered by the warranty If the washing machine is in a room which is at risk from frost an emergency emptying oper ation must be carried out when there is a frost risk see the section Carry Out Emergency Emptying Instructions for use Child Safety e Packaging components e g films polystyrene can be hazardous to children Risk of suffocation Keep packaging away from children e Children often cannot recognise the hazards associated with handling electrical appliances Therefore ensure the necessary supervision dur ing operation and do not allow children to play with the washing ma chine there is a risk that children can get trapped inside Ensure that children or small animals cannot climb into the washing machine s drum When disposing of the washing machine Pull out the mains plug de stroy the door lock cut off the electrical supply lead and throw away the plug and the left over cable This means that children at play cannot shut themselves inside a
19. anceled With the use of the additional rinse cycle the water consumption and programme duration increases It may be necessary to cool the wash water before pumping out in or der to prevent damage to plastics draining pipes The wash water is cooled before pumping out at the end of the main wash cycle by the addition of cold water This setting is only effective for the programme COTTON LINEN EASY CARE WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE with a temperature over 40 C When supplying the appliance no water cooling is set except for the additional programme DELICATES BEHOEDZAAM SENSITIVE Setting water cooling Turn programme knob to SHORT SPIN KORT CENTRIFUG ESSORAGE DELICAT Keep the PRE WASH VOORWAS PRELAV button depressed for at least 5 seconds After the button has been depressed for 5 seconds the MAIN WASH HOOFDWAS LAVAGE will blink on the programme cycle display for 5 seconds release PRE WASH VOORWAS PRELAV button When the blinking has stopped the water cooling is set It remains set until it is canceled 43 Instructions for use is 1 i if you want to check whether the water cooling is set Turn the programme knob to SHORT SPIN KORT CENTRIFUG ESSORAGE DELICAT Press the PRE WASH VOORWAS PRELAV button briefly If the MAIN WASH HOOFDWAS LAVAGE blinks on the programme cy cle display then the water cooling is set Cance
20. and if necessary replace Close cover properly Abort programme remove washing from door Start programme again Close off emergency empty ing hose see section Carry out energy emptying opera tion In the case of a leaking emergency emptying hose call the customer service Close water tap remove electric plug and inform customer service Instructions for use Problem Conditioner has not rinsed compartment amp for care agent is filled with water Washing is badly creased The washing has not been spun as dry as usual Washing is not spun Remaining water is vis iblein the drum Error code Le appears Door cannot be opened when appliance is switched on Detergent remains form inthe washing powder liquid drawer Possible cause Conditioner insert in the compartment for care agent is not properly placed on or is blocked Probably too much washing has been put in The washing was not able to be distributed evenly in the drum prior to spinning There is a kink n the drainage hose Maximum pump height emptying height 1m from base surface of the appli ance is exceeded Water pump is blocked At the siphon connection Si phon is blocked Door is locked for safety rea sons display DOOR LIGHT is Off Programme security is switched On Water tap is not fully opened Filter in the socket of the in flow hose at the water tap or the appliance is blocke
21. ater tap if necessary defective have it repaired 35 Instructions for use 36 Problem Washing machine vi brates during operation or is unsteady Wash water of the mainwashing foams strongly Water leaks out of the washing machine The emptying pump runs continuously also when the appli ance is switched off Possible cause Transport safeguard has not been removed The height adjustable threaded feet are not correctly adjusted There is very little washing in the drum e g only a dressing gown Water could not be fully pumped out before spinning because drainage hose is kinked or water pump is blocked Probably too much washing agent has been filled in Connection to the inflow hose is leaking Drainage hose is leaking Cover of the water pump is not properly closed Washing is jammed in the door Emergency emptying hose is not properly closed off or is leaking Anti flood system Aqua Con trol has displayed Remedy Remove transport safeguard according to setting up and connection instructions Align feet according to setting up and connection instructions Function is not affected by this Move the path of the hose and if necessary remove kink or clean water pump and if necessary remove foreign body from pump housing Dose washing agent exactly according to manufacturers instructions Tighten inflow hose connection Check drainage hose
22. base panel and close Emergency Unlocking of the Filling Door When the filling door can no longer be opened it can be opened with the aid of the emergency unlocking facility A Warning Switch off the washing machine before operating the emer gency unlocking and remove the plug from the mains t 1 If you can see water in the viewing window of the filling door first carry out an emergency emptying operation see Section Carry out an emergency emptying operation 2 Open the flap downwards in the right part of the base panel 3 Turn the rotary knob clockwise with the aid of a coin The filling door springs open 41 Instructions for use 42 Additional rinse cycle RINCAGE is 1 The washing machine is set to very economical water consumption However for people who suffer from an allergy it can be helpfulto rinse with more water When this function is set an additional rinse takes place for the pro grammes COTTON LINEN EASY CARE WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE as well as EASY IRON STRIJKVRIJ SANS REPASSAGE and DELICATES FIJNE WAS LINGE DELICAT On delivery of the machine no additional rinse cycle is set Set additional rinse cycle Turn programme knob to SHORT SPIN KORT CENTRIFUG ESSORAGE DELICAT Keep button DELICATES BEHOEDZAAM SENSITIVE depressed for at lest 5 seconds After the button has been pressed for 5 seconds RINSE SPOELE
23. ble functions The programmable functions of additional rinsing RINSE SPOELEN RINCAGE water cooling and Variomatic lightspinning are described in the chapter What to do if 13 Instructions for use 14 Consumption values and time requirements The values for selected programmes in the following table were deter mined under normal conditions Besides the selected settings additional functions the consumption values also depend on other conditions such as water temperature or the washing powder liquid used However they provide a helpful guide for operation in the household Programme knob Temperature ENERGY SAVING ENERGIEBESPAREN ECONOMIQUE COTTON LINEN EASY CARE 95 WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE COTTON LINEN EASY CARE 60 WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE COTTON LINEN EASY CARE 40 WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE COTTON LINEN EASY CARE 60 WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE ECO TIME press 1x COTTON LINEN EASY CARE 40 WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE ECO TIME press 1x COTTON LINEN EASY CARE 40 WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE ECO TIME press 2x Type of textile Cotton Cotton Cotton Cotton Synthetics Synthetics Synthetics DELICATES FIJNE WAS LING
24. d Remedy Clean detergent drawer seat conditioner insert properly Note maximum filling quan tity see programme tables For easy care textiles select the EASY IRON STRUKVRU SANS REPASSAGE pro gramme Always load the drum as ful as possible with a combina tion of large and small items Remove kink Refer to the customer service For pumping heights over 1m they have a supple mentary set as special spares available Switch off appliance and pull out electric plug Clean wa ter pump Clean siphon Wait till display DOOR LIGHT DEUR LICHT PORTE ECLAIR lights up green Cancel programme security see section Programme se curity Open water tap fully Close water tap Disconnect inflow pipe from water tap and from the appliance and clean filter 37 Instructions for use 38 Problem Rinse water is cloudy When pressing an addi tional programme but ton the correspondingdisplay does not light up Programme cycledis play blinks constantly Possible cause The reason is probably a de tergent with a high silicate content The selected additionalpro gramme cannot be combined with the set programme Programme security is switched On during the wash cycle the programme knob has been moved Remedy No negative effect on the rinse results possibly use a liquid detergent Make another selection Turn programme knob back to its original position se
25. e Programme security Instructions for use If the washing result is not satisfactory If the washing is grey and limescale forms in the drum e Not enough washing detergent added e The right washing detergent was not used e Special types of stain were not pretreated Program or temperature incorrectly set e f binary wahing detergents were used the individual components were not added in the correct ratio If there are still grey stains on the washing Washing contaminated with creams grease or oils was washing with too little detergent Washing at too low temperature A frequent cause is that conditioner particularly concentrated form ended up on the washing Wash out such stains as quickly as possible and carefully use the right conditioner If foam is still visible after the final rinse Modern washing detergents can still produce foam even in the final rinse The washing is still sufficiently rinsed If there are white residues on the washing These are the insoluble components of modern detergents They are not the result of an insufficient rinsing effect Shake or brush off the washing Perhaps in future you should turn the washing before washing it Check the choice of detergent and use a liquid detergent if necessary 39 Instructions for use 40 Carry Out an Emergency Emptying Operation I 1 Open the flap downwards in the right Remove the emergency emptying h
26. e Use a coin to turn the rotary knob on the inside of the filling door clockwise as far as it will go Warning The rotary knob must not be pressed in following adjust ment otherwise the child safety feature is not active The rotary knob must project as shown in the diagram Cancelling the Child Safety Feature Turn the rotary knob anticlockwise as far as it will go M NS 47 Setting up and connection instructions Setting up and connection instructions Safety Instructions for Installation e Do not tilt the washing machine onto its front or onto its right side looking from the front Electrical components could get wet e Check the washing machine for transport damage Never connect a damaged unit Consult your supplier in the event of damage e Ensure that all parts of the transport safeguard have been removed and that the splash guard is fitted to the unit see Removing the Transport Safeguard Otherwise damage to the unit or to adjacent furniture could occur during spinning e Always insert the plug into a correctly installed PE socket e In the case of permanent installation A permanent installation may only be made by an authorised specialist e Before putting the unit into operation ensure that the rated voltage and current type shown on the unit s rating plate are the same as the mains voltage and current type at the installation location The re quired electrical fuse is also sho
27. factory customer service in your area is at your disposal at all times Also refer to the section Service Printed on recycled paper Those who think ecologically act ecologically Contents Instructions for ASG 4 2505 O ete 6 Safety ues oggi ite ate De spas ara aic a et d pa ee 6 Disposal se SE Uu s 8 Environmental Tips 8 Unit Description cic j ghia er eter De put 9 FONE VIEWS ai eg pru UO ave ae ete a eet 9 Drawer for Washing Powder and Care Agent 9 Control Panel stat odaiced yak a get 10 Programme knob 10 Additional programme buttons 12 Programmable functions 13 Consumption values and time requirements 14 Wash Time Display siis cre aia ees ana DR n a 15 What does UPDATE mean 15 Water Protection Aqua Control Aqua Alarm 15 Before the first wash 16 Preparing a Wash Load 16 Sorting and preparing a wash load 16 Types of washing and care symbols 17 Washing Detergents and Care Agents 18 Which washing detergent and care agent 18 How much washing detergent a
28. g Door iS I Open Press the button DOOR LIGHT DEUR ee LICHT PORTE ECLAIR The filling door springs PORTE CLAIR O open Close Press the filling door firmly closed When the unit is switched on the display DOOR LIGHT DEUR LICHT PORTE ECLAIR shows whether the filling door can be opened green The door can be opened not when the program saving func tion is activated for details see the section Program Saving off The door cannot be opened at present red The door is open The washing drum is illuminated when the filling door is open The light goes out automatically after approx 3 minutes Putting in the washing i cs 1 2 Put in washing Close door tightly For maximum filling quantity see Programme tables For information on the correct preparation of the washing see sorting and preparing the washing Sort and prepare washing according to type and colour Open door Press DOOR LIGHT DEUR LICHT PORTE ECLAIR button Door springs open MA NA aq n Caution Do not jam items of washing when closing the door Both textiles and appliance can be damaged 23 Instructions for use Add Washing Detergent Care Agent is 1 Fill with washing detergent care agent For information on wash and care agent see chapter Washing powder and care agent Open the washing detergent drawer Reach into the flap at the bottom of the drawer
29. g quantity Attention If the washing machine is not used for a long time Close the water tap and disconnect the washing machine from the electricity mains Aqua Control water protection with Aqua Alarm does not operate if the power supply is interrupted Instructions for use Programme tables Wash In the following there are shown not all the possible but only the commonly used and best settings max Filling Type of washing ul Cleaning symbol quantity dryweight Cotton linen 5k 3 Cotton Linen 5kg 2 5 kg Programme knob temperature in C ENERGY SAVING 60 ENERGIEBESPAREN ECONOMIQUE COTTON LINEN EASY CARE WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE 20 to 95 REFRESH OPFRISSEN RAFRAICHIR 30 possible Additional programmes PRE WASH VOORWAS PRELAV DELICATE BEHOEDZAAM SENSITIVE STAINS VLEKKEN TACHES TIME SAVE PRE WASH VOORWAS PRELAV DELICATE BEHOEDZAAM SENSITIVE STAINS VLEKKEN TACHES TIME SAVE 29 Instructions for use Type of washing Cleaning symbol Easy care Delicates Wool HandWashing wy Silk HandWashing W7 max Filling quantity dryweight 2 2 5kg 1kg 2 5kg 2 5kg or 15 20 m curtaining 2 5kg 2kg 1kg Programme knob temperature in C COTTON LINEN EASY CARE WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE 20 to 60 EASY IRON
30. ge 23 444 cease eta eer c hue i e o d de 55 Delivery Heads over 1m 56 Technical Data oi ias 56 DIMENSIONS gt ru EE ER es ee se ae we o m ae 56 Guarantee conditions 57 Customer services 59 Ide x area ED citet Sex Ret 62 Instructions for use Instructions for use N Safety The safety of AEG electrical appliances conforms to the recognised technical regulations and the legislation covering the safety of appli ances However as manufacturers we still regard it as our responsibility to inform you of the following safety information Before Putting into Operation for the First Time e Refer to the Installation and Connection Instructions later in this user information e When the unit is delivered in winter months with minus tempera tures Store the washing machine for 24 hours at room temperature before putting it into operation Correct Use e The washing machine is only designed for normal domestic washing If the unit is used for purposes other than that for which it is de signed the manufacturer can accept no liability for any resulting damages e For safety reasons conversions or modifications to the washing ma chine are not permissible e Use only detergents which are suitable for washing machines Follow the washing detergent manufacturer s instructions e The washing must not cont
31. ge the spin speed for the final spin select RINSE HOLD GEEN CENTR SANS une ESSOR 1200 Press the button Spin speed RINSE HOLD GEEN 1000 CENTR SANS ESSOR as often as necessary until 800 the display for the required spin speed or of 400 RINSE HOLD GEEN CENTR SANS ESSOR lights GEEN CENTR SANS ESSOR up If RINSE HOLD GEEN CENTR SANS ESSOR is se lected the washing remains in the last rinsing water and is not spun If you do not change the spin speed the final spin is automatically adapted depending on the washing program COTTONS LINEN EASY CARES 1600 revolutions WITTE BONTE WAS BLANC COULEURS per minute KREUKHERSTELLEND DEFROISSABLE ENERGY SAVING 1600 revolutions ENERGIEBESPAREN ECONOMIQUE per minute DELICATES 1200 revolutions FIJNE WAS LINGE DELICAT per minute WOOL 1200 revolutions WOL LAINE amp y Handwash per minute SILK 1200 revolutions ZIJDE SOIE amp Handwash per minute FASHION 1200 revolutions per minute EASY IRON 1200 revolutions STRIJKVRIJ SANS REPASSAGE per minute The speed of the intermediate spin depends on the selected program and cannot be changed 21 Instructions for use Setting the delay timer soaking time me 22 Delay timer The DELAY TIMER STARTTIJDKEUZE DEPART DIFFERE button makes it possible to delay the start of a wash programme by 1 to a maximum of 19 hours Select wash p
32. he first time Mix small and large items of washing This improves the wash effi ciency and the washing is more evenly distributed during the spin cy cle Shake out washing before placing into the washing machine Do not place folded washing into the drum Observe such washing instructions as wash separately and wash separately several times Instructions for use Types of washing and care symbols The care symbols help in the selection of the correct wash programmes The washing should be sorted according to type and care symbols The temperature information on the care symbols are always maximum values Cottons Textiles of Cotton and Linens with this care symbol are resistant to me chanical loading and high temperatures For this type of washing the programme COTTON LINEN EASY CARE WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE is suitable Linen V amp 7 Textiles of cotton and linen with this care symbol are resistant to me chanical loading For this type of washing the programme COTTON LINEN EASY CARE WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE is suitable Easy care washing Textiles such as reinforced cotton cotton wool mixtures and synthetics with this care symbol demand a mechanically milder handling For these type of washing the programmes COTTON LINEN EASY CARE WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROIS SABLE and LIGHT IRON STRIJKVRIJ SANS
33. l water cooling Turn programme knob to SHORT SPIN KORT CENTRIFUG ESSORAGE DELICAT Keep the PRE WASH VOORWAS PRELAV button depressed for at least 5 seconds Immediately after the button is pressed MAIN WASH HOOFDWAS LAVAGE will blink on the programme cycle display After 5 seconds MAIN WASH HOOFDWAS LAVAGE will stop blinking and will remain lit constantly for 5 seconds Whilst MAIN WASH HOOFDWAS LAVAGE is constantly lit release the PRE WASH VOORWAS PRELAV button The water cooling is canceled after MAINWASH HOOFDWAS LAVAGE stops blinking Due to the water cooling the water consumption and and the pro gramme duration increase Additional rinse cycle and water cooling 44 Additional rinse cycle and water cooling can be combined Setting as for Additional Rinse Cycle and Water Cooling Instructions for use Variomatic loose spinning pe iS 1 Adjustable spin integrated into the end spin The washing adheres less to the drum wall and can be removed easier Can be selected to COTTON LINEN EASY CARE WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE Set loose spin Turn programme knob to SHORT SPIN KORT CENTRIFUG ESSORAGE DELICAT Keep button STAINS VLEKKEN TACHES depressed for at least 5 sec onds After the button has been depressed for 5 seconds the END EINDE FIN on the programme cycle display blinks for 5 seconds Whil
34. licate textile we recommend washing only one article of clothing if possible and on no account washing it together with other textiles For extremely delicate silk textiles it is possible to obtain an even more gentle handling by using the TIME SAVE button 11 Instructions for use FASHION Especially gentle programme at 40 C for modern textilessuch as Viskose Modal Cupro Lyocell with more gentle handling than with the DELICATE FIJNE WAS LINGE DELICAT programme and more intensive cleaning effect than with the hand wash programme REFRESH OPFRISSEN RAFRAICHIR Ca 20 minute special programme at 30 C for short wash cycle wash ing of textiles such as sports clothing that has only been worn once and is only lightly soiled EASY IRON STRIJKVRIJ SANS REPASSAGE Wash programme at 40 C for easy care textiles that will only need to be lightly ironed or not at all after this programme ENERGY SAVING ENERGIEBESPAREN ECONOMIQUE Special energy and water saving programme at ca 60 C for lightly or normally soiled cotton linen with increased washing time Additional programme buttons The purpose of the additional programme buttonsis Voorwas to adapt the washing programme to the degree of PRELAV O soiling of the washing For normally soiled BEHOED washing additional programs such as PREWASH sn AM VOORWAS PRELAV and STAINS VLEKKEN TACHES are not necessary Depending on the programme vario
35. ly cotton linen the programme for cotton linen will be carriedout for mostly synthetics a programme for easy care washing For purely easy care loading the amount of filling should not exceed 2 5 kg in order to prevent increased creasing build up RINSING SPOELEN RINCAGE Separate rinse separate Conditioning separate impregnation of wet washing 1 rinse cycle fluid conditioner from the compartment amp is rinsed in spin Do not pour conditioner into the compartment if a separate spin cycle is to be carried out PUMP OUT POMPEN VIDANGE Pumping out the water after a rinse stop without spinning Rinse stop means the washing remains in the last rinse water it is not spun SPIN CENTRIFUG ESSORAGE Pumping out the water after a rinse stop and spin or separate spinning of hand washed cotton linen and easy care washing GENTLE SPIN KORT CENTRIFUG ESSORAGE DELICAT Pumping out the water after a rinse stop and gentle spin or separate gentle spin of delicate textiles delicate washing wool at low speed DELICATE WASHING FIJNE WAS LINGE DELICAT Wash program for delicate washing at 30 C or 40 C WOOL WOL LAINE y Hand wash program Wash programme cold to 40 C for machine machine washable wool as well as for handwashable wool textiles with the easy care symbol Handwash programme SILK ZUDE SOIE y handwash Wash programme at 30 C for hand and machine washable silk As silk is a very de
36. nd care agent 18 Water Softener o 22250 set ker Ae DERE e aou pi pan Ande eren 18 Carrying out a wash cycle 19 Brief INSTEUCTIONS iii cnl uon urbe cui gp rim eR Nri decr wed 19 Setting the wash programme 20 Change Spin Speed Select Rinse Hold 21 Setting the delay timer soaking time 22 Opening and Closing the Filling Door 23 Putting in the washing 23 Add Washing Detergent Care Agent 24 Starting the wash program 25 Sequence of the programme 26 Wash cycle ended Remove washing 27 Programme tables 29 Wash es TU erecta Mite ES 29 Separate Rinsing Conditioner Starching Impregnation 31 Separate Spinning ii rs Me wee eae A PES 31 Cleaning and Care oo 32 Control Pa l ii is 32 Washing Detergent Drawer 32 Washing Drum adi ha ee X M DR 33 Filling DOO isse eer d rper eue a CEDERE QE EIE AN 33 Cleaning the drain pump 34 What to ON cessere e peek 1 35 Remedying Fa ults 2 e ueber ca ek ue loe CE nil attenante 35 If the washing re
37. nd in so doing be in danger General Safety Repairs to the washing machine may only be carried out by skilled persons Incorrect repairs can cause significant hazards If repairs are necessary consult our Customer Service or your specialist dealer e Never put the washing machine into operation if the mains cable is damaged or if the control panel work top or base area are damaged in such a way that the inside of the unit is open and accessible Switch off the washing machine before carrying out cleaning care and maintenance work Also pull the mains plug out of the socket or if itis permanently connected switch off the LS switch in the fuse box or completely unscrew the screw in fuse e f operation is stopped disconnect the appliance from the mains sup ply and shut off the tap Never pull the cable to remove the plug from the socket Always pull the plug itself Multiple connectors couplings and extension cables must not be used There is a fire risk with overheating Do not spray down the washing machine with a water jet Electric shock risk The glass in the filling door becomes hot in the case of washing pro grams with high temperatures Do not touch Allow the washing solution to cool down before emergency emptying of the unit before cleaning or before emergency opening of the fill ing door Instructions for use e Small animals can chew the power cables and water hoses Risk of electric sh
38. not permitted to submerge the end of the drainage hose into the pumped off water Water could be sucked up into the hose When hooked into a wash basin or a bath tub the drainage hose must be protected from slipping out of place by the supplied slip on elbow Other wise the repelling power of the drain ing water can press the hose out of the sink ts Fix the elbow to the water tap or to the wall with string 55 Setting up and connection instructions Delivery Heads over 1m To pump off the washing rinsing agent every washing machine has a pump which transports liquids via the drainage hose up to a height of 1m calculated from the machine s floor For delivery heads over 1m consult the Customer Service Technical Data Height adjustment Approx 10 5mm Filling quantity max 5kg program dependent Use Domestic Drum speed spin see rating plate Water pressure 1 10bar 210 100 N cm 0 1 1 0 MPa Dimensions 10 8507 Measurements in mm 56 Guarantee conditions Guarantee conditions 10 11 Belgium DECLARATION OF GUARANTEE TERMS Our appliances are produced with the greatest of care However a defect may still oc cur Our consumer services department will repair this upon request either during or after the guarantee period The service life of the appliance will not however be re duced as a result This declaration of guara
39. ntee terms is based on European Union Directive 99 44 EC and the provisions of the Civil Code The statutory rights that the consumer has under this legislation are not affected by this declaration of guarantee terms This declaration does not affect the vendor s statutory warranty to the end user The appliance is guaranteed within the context of and in adherence with the following terms In accordance with provisions laid down in paragraphs 2 to 15 we will remedy free of charge any defect that occurs within 24 months from the date the appliance is deliv ered to the first end user These guarantee terms do not apply in the event of use for professional or equivalent purposes Performing the guarantee means that the appliance is returned to the condition it was in before the defect occurred Defective parts are replaced or repaired Parts replaced free of charge become our property So as to avoid more severe damage the defect must be brought to our attention imme diately Applying the guarantee is subject to the consumer providing proof of purchase show ing the purchase and or delivery date The guarantee will not apply if damage caused to delicate parts such as glass vitreous ceramic synthetic materials and rubber is the result of inappropriate use The guarantee cannot be called on for minor faults that do not affect the value or the overall reliability of the appliance The statutory warranty does n
40. nts available ts Remove any rust deposits on the drum using a stainless steel cleaning agent Filling Door tx Check regularly whether there are deposits or foreign bodies in the rubber sleeve behind the filling door and if so remove them 33 Instructions for use 34 Cleaning the drain pump Paper clips nails and so on can sometimes get into the washing ma chine with the washing and remain in the drain pump casing Fluff and strands of fabric can gather on these items and block the drain pump Therefore the drain pump should be cleaned at least once a year Warning Switch off the washing machine and pull out the mains plug before cleaning the drain pump First carry out an emergency emptying see section Carry Out Emer gency Emptying Place a towel on the floor in front of the cover of the solution pump Residual water can run out Unscrew the drain pump cover anti clockwise and pull it out Remove any foregin bodies from the pump housing Replace the cover Insert the webs on the cover laterally into the guide slots and screw the cover firmly into place clockwise Close the emergency emptying hose and place it in the holder Close the flap Instructions for use What to do if Remedying Faults In the event of a fault try to solve the problem yourself with the aid of the information provided here If you call Customer Se
41. o pieces in order to extend the hoses Sealing rings are supplied either in the plastic nuts of the hose screw connection or in the en closed pack Do not use other seals the machine Attention Do not lay the supply hose vertically downwards Rather turn it to the right or left as shown in the diagram Only tighten the screw connection manually Connect the hose with the straight connection to a water tap with a screw thread of R 3 4 inches x Attention Only tighten the screw connection 3 manually E SF By slowly opening the water tap before putting 3 the washing machine into operation check whether the connection is free of leaks Setting up and connection instructions Water Drainage The drainage hose can either be connected to a siphon or hung ina wash basin or bath tub Only original hoses may be used for extension purposes max 3m on the floor and then up to 80cm high The Customer Service stocks hoses in lengths of 2 7 and 4m Attention It is absolutely essential to install the drainage hose free of pinches Water Drainage into a Siphon The grommet on the end of the hose fits all commonly used siphon types Co t Secure the grommet siphon connecting gt g point with a hose clamp e Draining the water into a basin Attention Small basins are not suitable for draining the water into them Water could overflow It is
42. ock and danger of water damage Keep small animals away from the washing machine e Disposal Dispose the packing material Dispose of your washing machine s packaging correctly All the packag ing materials used are harmless to the environment and can be recy cled e Plastic parts are marked with standard international abbreviations gt PE lt for polyethylene e g sheet wrapping material gt PS lt for polystyrene e g padding material always CFC free gt POM lt for polyoxymethylene e g plastic clips e Cardboard packaging is manufactured from recycled paper and should be deposited in the waste paper collection for recycling Dispose the old appliance When you finally put your appliance out of operation please bring it to your nearest recycling centre or to your dealer Environmental Tips e You do not need to use a pre wash cycle or soak for washing with av erage soiling This saves detergent water and time and protects the environment e When loaded to the capacities indicated the washing machine is es pecially efficient e For small loads use only one half to two thirds of the recommended quantity of detergent e By pre treating stains and marks you will be able to wash at a lower temperature e t is often possible to wash without using softener Give it a try If you use a drier your washing will be soft and fluffy even without a softener e For medium to high water hardness from hardness range Il
43. ose Place the collecting vessel underneath Release and pull out the plug of the When the washing machine no longer pumps off the washing solu tion an emergency emptying operation must be carried out e When the washing machine is in a room where there is a frost risk an emergency emptying operation must be carried out when there is a frost risk Also Unscrew the intake hose from the water tap and lay it on the floor Empty the drainage hose Warning Switch off the washing machine before carrying out an emergency emptying operation and pull out the mains plug Caution The washing solution running out of the emergency emptying hose can be hot Risk of scalding Allow the washing solution to cool down before carrying out emergency emptying Provide a flat collecting vessel to catch the washing solution as it runs out part of the base panel and pull it off from the holder emergency emptying hose by turning it anticlockwise The washing solution drains off De pending on the amount of solution it may be necessary to empty the collect ing vessel several times To do this tem porarily close the emergency emptying hose again with the plug Instructions for use When all the washing solution has drained off 6 Firmly push the plug into the emergency emptying hose and turn it tight clockwise 7 Put the emergency emptying hose back into the holder 8 Insert the flap into the
44. ot apply when defects are caused by a chemical or electrochemical reaction caused by water abnormal environmental conditions in general unsuitable operating conditions contact with harsh substances The guarantee does not apply to defects due to transport which have occurred outside of our responsibility Nor will the guarantee cover those caused by inadequate installa tion or assembly lack of maintenance or failure to respect the assembly instructions or directions for use Defects that result from repairs or measures carried out by people who are not qualified or expert or defects that result from the addition of non original accessories or spare parts are not covered by the guarantee Appliances that are easy to transport may be delivered or sent to the consumer services department Home repairs are only anticipated for bulky appliances or built in appli ances If the appliances are built in built under fixed or suspended in such a way that remov ing and replacing them in the place where they are fitted takes more than half an hour the costs that result therefrom will be charged for Connected damage caused by these removal and replacement operations will be the responsibility of the user 57 Guarantee conditions 58 12 13 14 15 If during the guarantee period repairing the same defect repeatedly is not conclusive or if the repair costs are considered disproportionate in agreemen
45. r of the room where the wooden floor is best firmly in stalled and is therefore least likely to be susceptible to vibrations 51 Setting up and connection instructions 52 Compensate for Floor Unevenness i Automatic Adjustment Foot Your washing machine s rear left foot is of a spring leg design This guarantees good stability of the unit even at high spinning speeds If the washing machine still does not stand firmly enough during spin ning proceed as follows Adjust the three adjustment feet to the setpoint 10mm To do this use the supplied special button to remove the transport safeguard If the automatic adjustment foot still does not reach the floor 2 Manually extend the automatic adjustment foot rear left by the necessary amount 3 If necessary check the setting with a spirit level Attention Never use wood card or similar underlays to compen sate for minor floor unevenness Always use the adjustable screw type feet of the machine pe Setting up and connection instructions Electrical Connection CE Refer to the rating plate for details of the mains voltage current type and the necessary fuses The rating plate is located at the top behind the filling door This unit conforms to the following EU directives the Low Voltage Directive 73 23 EU with changes the EMC Directive 89 336 EWG with changes Water
46. responds a warning signal sounds at the same time 15 Instructions for use Before the first wash t Carry out a wash cycle without washing Programme COTTON LINEN WITTE BONTE WAS BLANC COULEURS 95 with half the washing pow der liquidquantity In this way manufacturing remains in the drum and water container will be removed Preparing a Wash Load Sorting and preparing a wash load e Sort the washing according to care symbol see Washing Types and Care Symbols Empty all pockets Remove metal objects paper clips safety pins etc n order to prevent the washing tangling and being damaged close zippers button up duvet covers and pillow cases and tie up loose straps such as from aprons e Turn articles with double layered fabric inside out sleeping bags anoraks etc n the case of knitted coloured fabrics and also wool and fabrics with jewellery attached turn inside out Place small and delicate articles baby booties stockings bras etc into a washing net a pillow case with zipper or in large socks before washing Handle curtains with particular care Metal fittings or burred plastic fittings must be removed or tied into a net or bag We cannot accept liability for damage Do not wash coloured and white washing together This could trans fer colour to white washing or turn it grey New coloured items often have an excess of colour It is better to wash such items separately t
47. rogramme gg Press DELAY TIMER STARTTIJDKEUZE DEPART y RESTANT DIFFERE button STARTIUDKEUZE Press START PAUSE START PAUZE DEPART DIFFERE MARCHE PAUSE button With a delay in the start the DELAY TIMER STARTTIJDKEUZE DEPART DIFFERE display lights up Depress the DELAY TIMER STARTTUDKEUZE DEPART DIFFERE button until the desired start delay appears e g in the form of 2h for a delay of the programme start of 12 hours If 3h is displayed and the button is pressed again then the delay timer is annulled There will appear the duration of the set wash programme display in minutes e g 20 The set delay timer can also be annulled in that the programme knob is set to the OFF position Soaking duration With depressed PRE WASH VOORWAS PRELAV button by pressing the DELAY TIMER STARTTIJDKEUZE DEPART DIFFERE button the duration of soaking can be extended by 1 to a maximum of 19 hours Press the PRE WASH VOORWAS PRELAV button Press DELAY TIMER STARTTIJDKEUZE DEPART DIFFERE button Soaking is set the DURATION LOOPTUD TEMPS RESTANT display lights up The soaking time is now ca 1 hour By repeated pressing of the DELAY TIMER STARTTIJDKEUZE DEPART DIFFERE button the soaking times can be extended in steps of an hour The DURATION LOOPTIJD TEMPS RESTANT and DELAY TIMER STARTTIJDKEUZE DEPART DIFFERE displays light up Instructions for use Opening and Closing the Fillin
48. roup products such as refrigerators cookers washing machines vacuum cleaners chain saws and lawn mowers are sold each year to a value of approx USD 14 billion in more than 150 countries around the world AEG Hausger te GmbH Postfach 1036 D 90327 Nurnberg http www aeg hausgeraete de Copyright by AEG 822 942 968 01 040203 04 Subject to change without notice
49. rvice to deal with one of the faults listed here or to remedy an operating fault the customer service technician s visit will not be free of charge even dur ing the warranty period e t the fault code tor CZ appears in the Fr 4 LOGGED multi display you may be able to remedy Lee the fault yourself see the fault table below After remedying the fault press the button START PAUSE START PAUZE MARCHE PAUSE If the fault code is displayed again please inform the Customer Service e n the case of all other displayed faults C and number or letter please inform the Customer Service and state the fault code Problem Possible cause Remedy Electric plug not inserted Insert electric plug Fuse of the mains installation Replace fuse Is not correct p Washing machine does Door is not properly closed nOs goor amis not function gage audibly Button START PAUSE Press START PAUSE START START PAUZE MARCHE PAUZE MARCHE PAUSE PAUSE has not been pressed button until the programme long enough starts Cancel child safety feature see section Childsafety feature Child safety feature is Door cannot be closed a On Water tap is switched Off Open water tap een gt Close water tap Disconnect Water is not entering Filter in the socket of the Leal ARE tap remove ra flow hose connection is Error code L 1 ap filterand clean under blocked pears running water Water tap is full of lime or Check w
50. see De tergents and Conditioners you should use water softener The detergent can then always be dosed as for hardness range soft Instructions for use Unit Description Front View Drawer for washing deter Control panel gent and care agent Rating plate behind filling door Filling door Screw feet height adjustable rear left Flap in front of Automatic solution pump adjustment foot Drawer for Washing Powder and Care Agent In wash stain treatment Pre wash Main detergent detergent powder and I soaking agent water softener or water softener if required Liquid care agent conditioner finisher starch Instructions for use 10 Control Panel Button Spin speed RINSE HOLD Additional programme Options Button DOOR LIGHT Program progress Display Programme knob ENERGIEBESPAREN UIT WITTE BONTE WAS ESSORAGE DELICAT ECONOMIQUE ARRET BLANC COULEURS VOORWAS DEUR UCHT VOORWAS PRELAV O 1600 O PORTEJEcLAIR PRELAVAGE O SRUFYEU 95 KREUKHERST HOOFDWAS SANS REPASSAGE senoen lide Uc QUU s ZAAM 1000 O START PAUZE RNCARE M 450 SENSITIVE MARCHE PAUSE ORE FASHION 40 800 O RINCAGE O AUDE y 30 400 CENTRIFUG VLEKKEN L29PTu ESSORAGE KOUD Ais TACHES GEEN CENTR TEMPS EINDE FROID e SPOELEN ISANS ESSOR
51. ssing the START PAUSE START PAUZE MARCHE PAUSE but ton then the door is not properly closed Press the door firmly closed and press the START PAUSE START PAUZE MARCHE PAUSE button again For a set delay time the set delay time runs out in the multi display the remaining time up to the start of the programme is displayed always in full hours During this time you can add washing or change the delay time or abort Adding washing Press the START PAUSE START PAUZE MARCHE PAUSE button The door can be opened Then close the door and press the START PAUSE START PAUZE MARCHE PAUSE button again e Changing the delay time or aborting Press the DELAY TIMER START TUDKEUZE DEPART DIFFERE button until the desired time is dis played With a display of the programme duration display in minutes e g 20 the wash programme starts immediately 25 Instructions for use Sequence of the programme 26 Programme sequence display ESIWAS O Before the start the programme steps to be carried HOGFOWAS out will be displayed by the Programme sequence SPOELN display During the washing cycle the current SPOELEN rogramme step is displayed i dob d ENS O ENRE Multi display The expected The remaining wash time in 1 F F o Loopt minutes up to the programme end is dis CL EMS i played in the Multi display During the wash cycle the remaining wash time can lengthen or re main static for
52. st END EINDE FIN blinks release the STAINS VLEKKEN TACHES button Loose spin is set when the blinking stops It is available until it is canceled again If you want to check whether loose spin is set Turn programme knob to SHORT SPIN KORT CENTRIFUG ESSORAGE DELICAT Press the STAINS VLEKKEN TACHES button briefly If END blinks on the programme cycle display then loose spin is set Cancel loose spin Turn programme knob to SHORT SPIN KORT CENTRIFUG ESSORAGE DELICAT Keep button STAINS VLEKKEN TACHES depressed for at least 5 sec onds Immediately after pressing the button END EINDE FIN on the pro gramme cycle display After 5 seconds END EINDE FIN stops blinking and lights up constantly for 5 seconds Whilst END EINDE FIN is constantly lit release the STAINS VLEKKEN TACHES button Loose spin is canceled after END EINDE FIN has stopped light ing up 45 Instructions for use Programme security 46 In order to secure a programme from undesirable changes e g Over rotating programme knob additional pressing of buttons etc it is possible to set the programme security This will prevent damage to your washing Setting and releasing the Programme security is possible at any time during a programme Setting programme security Set the desired washing programme Press the START PAUSE START PAUZE MARCHE PAUSE button to start
53. sult is not satisfactory 39 Carry Out an Emergency Emptying Operation 40 Emergency Unlocking of the Filling Door 41 Additional rinse cycle RINCAGE 42 Water cooling ooo herd x er ea eae eee tireurs 43 Additional rinse cycle and water cooling 44 Variomatic loose Spinning 45 Programme security 46 Child Safety Feature 47 Setting up and connection instructions 48 Safety Instructions for Installation 48 Setting Up the Unit 49 Transporting the Unit 49 Remove the Transport Safeguard 49 Prepare the Installation Location 51 Setting Up on a Concrete Pedestal 51 Setting Up on a Vibrating floor 51 Compensate for Floor Unevenness 52 Electrical Connection 53 Water Connection 53 Permissible Water Pressure 53 Water latlow 55 ieu e eR Reo re RII PEDIR 54 Water Draina
54. t with the consumer the defective appliance may be replaced with another appliance of the same value In this event we reserve the right to ask for a financial contribution calculated accord ing to the length of time it has been used A repair under guarantee does not mean that the normal guarantee period will be ex tended nor that a new guarantee period begins We give a twelve month guarantee for repairs limited to the same defect Except in the event where liability is legally imposed this declaration of guarantee terms excludes any compensation for damage outside the appliance for which the con sumer wishes to assert his rights In the event of legally admitted liability compensa tion will not exceed the purchase price paid for the appliance These guarantee terms are only valid for appliances purchased and used in Belgium For exported appliances the user must first make sure that they satisfy the technical con ditions e g voltage frequency installation instructions type of gas etc for the coun try concerned and that they can withstand the local climatic and environmental conditions For appliances purchased abroad the user must first ensure that they meet the qualifications required in Belgium Non essential or requested adjustments are not covered by the guarantee and are not possible in all cases Our consumer services department is always at your disposal even after the guarantee period has expired Address for our
55. the programme Simultaneously press the PREWASH VOORWAS PRELAV and DELICATE BEHOEDZAAM SENSITIVE buttons for 5 seconds Programmecycle display blinks for 5 seconds Programme security is switched On As long as the programme security is switched On no other settings can be made The door cannot be opened with the DOOR LIGHT DEUR LICHT PORTE ECLAIR button Also the pro gramme security must first be removed after the wash cycle is ended before the door can be opened If an attempt is made during the wash cycle to change the selected setting by pressing a button then the programme cycle display will blink for 5 seconds If an attempt is made to change the selected setting by turning the programme knob then the programme cycle display will blink until the programme knob is reset to the original setting The washing cycle is not influenced The programme knob must be in the original positionbefore the programme security can be released Releasing the programme security Keep the PREWASH VOORWAS PRELAV and DELICATE BEHOEDZAAM SENSITIVE buttons depressed simultaneously for 5 seconds Programme cycle display blinks for 5 seconds then lights up constantly for 5 sec onds The programme security is released Instructions for use Child Safety Feature When the child safety feature is used the filling door can no longer be closed and no more washing programs can be started Setting the Child Safety Featur
56. tion of the wash programme Caution if the wash cycle ends with Rinse Stop carry out PUMP OUT POMPEN VIDANGE SPIN CENTRIFUG ESSORAGE or SHORT SPIN KORT CENTRIFUG ESSORAGE DELICAT before opening the door Open door remove washing Switch washing machine Off Set programme knob to OFF UIT ARRET 19 Instructions for use 20 Setting the wash programme T p 1 For suitable programme correct temperature and possible additional programs for the respective type of washing see Programme tables With the programme knob set EX the desired wash programme and E nce temperature OPFRISSEN aa RAFRAICHIR In the multi display the FASHION probable duration of the set pro or G grammes will be shown in KD minutes UNE D ue FIJNE WAS LINGE DELICAT UIT AME WITTE BONTE WAS o N POMPEN 30 40 N CENTRIFUG bid sirens KREUKHERST 25 B SEEROISSABLE O 250 240 30 20 a SPOELEN oo POMPEN ESSORAGE KORT CENTRIFUG ESSORAGE DELICAT l Possible Press additional programme button s The display of the selected additional programme is displayed For changing to another selection press another button For resetting press button again VOORWAS PRELAV BEHOED ZAAM e SENSITIVE VLEKKEN TACHES TIME SAVE ECO TIME Instructions for use Change Spin Speed Select Rinse Hold pe If necessary chan
57. us functions T CHES O can be combined ESTO PRE WASH VOORWAS PRELAV Pre wash Soaking Cold pre wash before the subsequent automatic main wash cycle With button DELAY TIMER STARTTIJDKEUZE DEPART DIFFERE will soak the pre wash for heating DELICATE BEHOEDZAAM SENSITIVE Special additional programme with significantly higher rinse effect special spin cycle with simultaneously improved weave care reduced drum movement Ideal if washing is to be carried out often e g for over sensitive skin RINSE SPOELEN RINCAGE can additionally be selected Instructions for use STAINS VLEKKEN TACHES For handling strongly soiled or stained washing Stainssalt or tabs are rinsed in a time optimized manner during the programme cycle When setting WOOL WOL LAINE Sy handwash programme the ad ditional programmes cannot be selected with the buttons TIME SAVE Shortened washing programme for less soiled washing can be selected in three levels for the programme COTTON LINEN EASY CARE WITTE BONTE WAS BLANC COULEURS KREUKHERSTELLEND DEFROISSABLE and in two levels for other programmes Programme duration Without With Programme TIME SAVE TIME SAVE Pressbutton Press button 1x 2x COTTON LINEN EASYCARE WITTE BONTE WAS BLANC COULEURS i KREUKHERSTELLEND DEFROISSABLE 109 Mim S Mi ely at 60 C Other programmes e g DELICATE WASH TN PA FIJNE WAS LINGE DELICAT at 30 C Programma
58. wn on the rating plate e Should work be carried out on the water supply installations in order to allow the machine to be connected properly to the water supply this work must be carried out by an authorised installer e Should work be carried out on the mains supply in order to allow the machine to be connected properly to the electricity supply this work must be carried out by an authorised electrician e The mains cable may only be replaced by the Customer Service or by an authorised specialist Setting up and connection instructions Setting Up the Unit i Washing machines with curved panels are not suitable for substruc tures Transporting the Unit Do not place the washing machine on its front side or on its right side looking from the front Otherwise the electrical components can get wet e Never transport the unit without using the transport safeguard Do not remove the transport safeguard until you reach the installation site Transporting the unit without the transport safeguard can result in damage to the unit Never lift the unit by the open filling door or by its base When transporting the unit with a sack trolley Attach the sack trolley only at the side The scoop of the sack trolley must not be longer than 24cm otherwise the float switch can be de stroyed Remove the Transport Safeguard Attention It is essential to re move the transport safeguard be fore putting the unit into operation

AEG 86740 Washer User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents