RECARO Monza Nova 2 Reha / RECARO Monza
Contents
1. Press button Fig 3b Velcro fastening Lateral seat supports Adjust the backrest to a horizontal position to facilitate attachment of the lateral supports Pull the covers of the lateral supports over the side parts of the seat surface and attach them to the rear of the seat surface with the press button The cover can be removed zipper and washed in the machine at up to 30 C 86 F Fig 4a Attaching the support Fig 4b Press button rear Abduction block The abduction block can be adjusted in depth In order to do so it first has to be released from the groin belt Remove the belt strap end piece from the end of the groin belt and unthread the belt from the sliding buckle and belt buckle Pull the abduction block up and off the groin belt Thread the groin belt back through the sliding buckle and belt buckle and secure the loose end of the belt with the belt end piece Position the abduction block as needed on the hook and loop fastener provided on the seat bottom The cover is removable zipper and machine washable at up to 30 C To remove the cover the abduction block first has to be released from the groin belt as described above Fig 5a Belt end piece Fig 5b Removing the belt end piece Fig 5c Unthreading the sliding buckle and belt buckle Fig 5d Removing the abduction block Swivel base with footrest adapter accessory item code 820 1 Please note our separate instructions for mounting Download www thomashil2. RECARO Monza Nova 2 Reha Group II III Instructions for assembly and use of the Reha version supplement Thomashilfen RECARO Monza Nova 2 Reha RECARO Monza Nova 2 Seatfix Reha Thomashilfen 2 RECARO Monza Nova 2 Reha Instructions for assembly and use supplement RECARO Monza Nova 2 Reha Instructions for assembly and use of the Reha version Dear RECARO Monza Nova 2 Reha user To make handling of your new child restraint safe practical and comfortable for both you and your child please read these instructions and the instructions enclosed to the seat before use This manual is a supplement to the original RECARO assembly and usage instructions Some aspects in handling the car seat have changed due to the modification into a Reha version These changed aspects are described in this supplementary user manual Should you have further questions or problems please contact your specialist dealer or us directly Our address Thomas Hilfen f r Korperbehinderte GmbH amp Co Medico KG Walkmihlenstrase 1 D 27432 Bremerv rde Germany Phone 49 0 4761 886 63 or 68 E Mail info thomashilfen de www thomashilfen com General instructions Please note ALWAYS secure your child and the seat with the vehicle s 3 point belt The 5 point positioning belt integrated in the
3. bars by screwing them in or out until they have contact with the vehicle Then lock the support bars with the hand knobs to prevent them unscrewing accidentally Screw the hand knobs upwards as far as possible and tighten them fast Please note If the swivel base is being used the footrest is attached to the footrest adapter integrated in the swivel base In this case make sure to always secure the footrest against falling off with the hand knob provided with the user manual The receiver for the hand knob metal block with thread is situated on the left tube of the footrest adapter Lower leg length The lower leg length is adjusted by changing the height of the footrest Loosen both outer screws Retighten them after each adjustment Foot angle Loosen the four screws left and right on the underside of the footrest to adjust the desired foot angle with the rails Then retighten the screws Please note The footrest cannot be used in combination with the seat depth extension unless the swivel base is used in addition Note If the footrest should firmly be screwed to the seat the footrest adapter item code 821 is required Fig 6a Caps inserting the footrest Fig 6b Adjusting height to vehicle Seat wedge bottom accessory item code 810 The seat wedge is positioned centrically below the car seat The high edge is at the front to achieve an optimum rest position of the child The cover can be removed zipper and washed in the mac
4. ctive airbag unless recommended by the vehicle manufacturer e If a child restraint has been occupied in a crash or vehicle accident it must be replaced do NOT use the child restraint again A crash can cause unseen damage and using it again can cause serious injury or death e If the Monza Nova 2 Reha has been in a vehicle during a crash and no airbags were deployed it does not need to be replaced e NEVER leave a child unattended even when sleeping e NEVER allow a child to play with this child restraint it is NOT a toy e There is no guarantee that this child restraint will prevent injury or death in a particular crash However if you stress careful driving and proper use of your child restraint it can lower the risk of injury or death in most crashes General information Extreme weather When it is hot we recommend the following tips to reduce possible injury or discomfort to your child e Park your vehicle in the shade to help keep the restraint cooler e Cover the child restraint with a sheet or blanket when not in use e ALWAYS check surface temperatures of the child restraint before placing a child in it When it is cold we recommend the following tips to reduce possible injury or discomfort to your child e Remove the child s bulky clothing before restraining the child in the seat This will help belts and other safety features function properly e After restraining the child in the seat cover the child and the restraint sys
5. fen com Seatfix connection for swivel base accessory item code 818 Please note our separate instructions for mounting Download www thomashilfen com 5 Thomashilfen RECARO Monza Nova 2 Reha Instructions for assembly and use supplement Stabilising bow rear for swivel base accessory item code 819 Please note our separate instructions for mounting Download www thomashilfen com Stand front for swivel base accessory item code Please note our separate instructions for mounting Download www thomashilfen com Back stabilisers accessory item code The back stabilisers prevent the back from dropping Please note our separate instructions for mounting Download www thomashilfen com Footrest short 12 cm 4 7 accessory item code Footrest long 18 cm 7 1 accessory item code Remove the two caps at the front bottom part of the seat before attaching the footrest Press the catch springs in at the rear ends of the sliding rods and push the tubes into the holes as far as they will go Secure the footrest using the belt that runs around the seat bottom of the RECARO Monza Nova 2 Reha In order to do so open the buckle under the seat and loop the front section of the belt around the crossbar of the footrest Make sure that the belt is fastened correctly Use the sliding buckle to adjust the belt length as required To stabilize the footrest on the vehicle floor adjust the height of the support
6. fixture points In this way the seat is safely secured in the vehicle even without a child and does not have to be retained with the 3 point vehicle belt Please check beforehand whether your car has an Isofix anchor point When using the seatfix connection for the swivel base please mind the safety hints in the assembly instructions Safety warnings WARNING DEATH or SERIOUS INJURY can occur e Use only with children whose weight is between 15 and 50 kg 33 1 and 110 2 Ib and height is between 94 and 150 cm 37 and 59 e Discontinue use of your Monza Nova 2 Reha child restraint that is older than six years or has been in a severe crash to prevent injury due to deterioration or hidden damage See date of manufacture located on restraint e Use only the vehicle s lap and shoulder belt or 3 point system when restraining the child in this booster seat e Follow all instructions on the child restraint and in this manual Do NOT use this child restraint system until you have read and understood the instructions in this manual and in your vehicle owner s manual Do NOT let others install or use this child restraint system unless they understand how to use it e Do NOT make any technical modification to the child restraint system and use it only as outlined in these instructions Otherwise the safety function of the seat will be reduced or completely voided e Do not use the Monza Nova 2 Reha in the front seat of a vehicle with a
7. gth If required the belt length can also be adjusted with the two belt loops bolted at the back of the seat Belt buckle Press the red dent of the buckle to open Separate the two upper belt fasteners To close the belt put the belt fasteners into the buckle and push together until they lock in place with an audible Click The cover for the crotch pad zipper can be removed and washed in the machine at up to 30 C 86 F Please undo the zip on the bottom crotch pad as well to remove the cover Fig 1a Adjusting the belt length Fig 1b Opening and closing the belt buckle Click Adjust the seat s headrest to the highest position to facilitate attaching the headrest Pull the covers of the supports over the side parts of the headrest and fasten them at the top with the press button The pads are fastened to the lower part of the headrest with an elastic rubber band The cover can be removed zipper and washed in the machine at up to 30 C 86 F Fig 2a Attaching the headrest Fig 2b Fastening at bottom Fig 2c Fastening at top Lateral trunk supports The lateral trunk supports can be fastened at 3 different heights on the left and right in the back area with press buttons and Velcro Start with the press buttons The supports can be fixed more firmly by pressing against the fleece strips in the back of the seat The cover can be removed zipper and washed in the machine at up to 30 C 86 F Fig 3a
8. hine at up to 30 C 86 F Please note Function of the swivel base is considerably reduced if being used in combination with the seat wedge We therefore do not recommend using seat wedge and swivel base at the same time Fig 7a Positioning seat on seat wedge Fig 7b Final position Seat wedge inside accessory item code 809 The seat wedge inside can be fastened to the seat surface at 3 different positions 1 An active posture is achieved by placing the seat wedge on the seat with the high side facing the back 2 Velcro fasten the seat wedge with the flat side facing rearwards for a more passive posture rest position 3 In order to reduce the seat depth or to achieve a bigger hip angle you can also Velcro fasten the seat wedge to the rear of the seat in an upright position with the broad side facing downwards The two lateral pads for additional protection are Velcro fastened to the sides The cover can be removed zipper and washed in the machine at up to 30 C 86 F Fig 8a Active Fig 8b Passive Fig 8c Back Fig 8d With lateral pads Seat depth extension 13 cm 5 1 accessory item code 808 Remove the two caps at the front bottom part of the seat before attaching the seat depth extension Press the catch springs in at the rear ends of the sliding rods and push the tubes into the holes as far as they will go Secure the seat depth extension with the belt that runs around the seat bottom of the RECARO M
9. onza Nova 2 Reha In order to do so open the buckle under the seat and guide the front section of the belt through the belt loop on the seat depth extension Make sure that the belt is fastened correctly Use the sliding buckle to adjust the belt length as required Please note The seat depth extension cannot be used in combination with the footrest or swivel base unless the swivel base is used in addition The cover can be removed cord and washed in the machine at up to 30 C 86 F Fig 9a Removing caps Fig 9b Pressing in the catch springs Table accessory item code 811 Slide the table onto the two sides of the seat surface The table is fastened on both sides with two Velcro strips each Guide the Velcro strips of the table through the plastic rings at the seat seat back pelvic belt The cover can be removed zipper and washed in the machine at up to 30 C 86 F Fig 10a Attaching the table Fig 10b Attaching belts to seat Thomashilfen 6
10. passenger airbag unless the airbag has been switched off Use the child restraint only in rear seating positions equipped with 3 point belts so that the child cannot be endangered by the front seat passenger s active airbag e According to accident statistics children are safer when properly restrained in the rear seating positions than in the front seating positions e Before each use inspect the child restraint Make sure nothing on the child restraint is damaged loose or broken If anything on the restraint appears damaged loose or broken do NOT use the restraint e Failure to follow warnings on the child restraint labels could cause serious injury or death e Restraint systems should be securely belted to the vehicle even when they are not occupied since in a crash an unsecured child restraint system may injure other occupants e This restraint is NOT certified for aircraft use because this child restraint requires a lap AND shoulder belt e This booster is only to be used as a complete assembly of backrest and seat cushion DO NOT use the seat cushion alone without the backrest e Placing your child in a hot child restraint may result in burns e Do NOT add accessories toys padding or other items to this child restraint unless provided by RECARO or THOMASHILFEN e This child restraint must NOT be used in the home boats or other non certified applications e NEVER use this booster seat in any vehicle seating position equipped with an a
11. seat is NOT security relevant e Use only for children whose weight is 15 to 50 kg 33 1 to 110 2 Ib e Attention You have to use this seat always with the vehicle s 3 point belt DO NOT use the booster without the vehicle s 3 point e When using this seat as a belt positioning booster the shoulder portion of the vehicle s 3 point lap shoulder belt must be at or just above child s shoulder e The integreated harness system is only for positioning children with special needs e Follow all instructions on this child restraint Look into the written instructions located under the seat and the added instructions using for children with special needs e Register your child restraint with your manufacturer e DO NOT use the seat in a seating position with an active frontal airbag Always install this child restraint system forward facing Suitable for a body weight of up to 50 kg 110 2 Ib RECARO Monza Nova 2 Reha has successfully passed an overload test at Dekra Klettwitz on the basis of the requirements of ECE R 44 04 Thus the RECARO Monza Nova 2 Reha is approved for the use as restraint system for special needs S Play safe with RECARO Isofix model Seatfix Isofix LATCH is an internationally standardised fastening system for children car seats Corresponding Isofix anchor points are firmly connected to the vehicle s bodywork With Isofix children car seats can be quickly and easily anchored in these standardised
12. tem with a blanket or their jacket to maintain warmth and comfort of the child Thomashilfen 4 RECARO Monza Nova 2 Reha Instructions for assembly and use supplement Purpose indication The children car seat RECARO Monza Nova 2 Reha Monza Nova 2 Seatfix Reha is designed for the transport of children with special needs in vehicles The clinical pictures are amongst others e cerebral palsy e hypotony syndrome of unspecific genesis e muscular dystrophy e different syndrome diseases The car seat is characterized by its shell design and pad system which provide for additional seating safety stabilization of head and pelvis and support control of the feet Thus the RECARO Monza Nova 2 Reha Monza Nova 2 Seatfix Reha meets the needs of disabled children very well Application risks contraindications No application risks contraindications are known 5 point positioning belt Please note The 5 point positioning belt helps positioning the child in the car seat and does not protect the child in the event of an accident The 3 point belt in the car must always be used to secure the child in the seat Do not route the 5 point belt through the red belt guides on the headrest They are intended only for the 3 point belt Adjusting the belt length Pull the loose belt straps to shorten and tighten the belts To lengthen the belts press the release mechanism on the adjustment buckle and then pull out the belt to the desired len
Download Pdf Manuals
Related Search