UserManual_HS233H_EN_V1.0.
Contents
1. 12 GENERAL INSTRUCTIONS cssssssssssssscscscssscsscssscscscssscssessecssscsssessssssesseessees 12 FRONT PANEL CONTROL uueecsssssssscscscssscssscssccsecssscscssssssssecsscscecssesscecssesseeses 13 HOW TO ADJUST A SETTINGS cessscssssssssssssscsscscscssscsscssecesscscscscecseesssenseenes 14 PLUGAND PLAY 16 TECHNICAL SUPPORT 5 17 amp A FOR GENERAL PROBLEMS scscscssssscssscsscssscsescscscssccsscssscssecsseesees 17 ERROR MESSAGE amp POSSIBLE SOLUTIONS sscssssssssscsscssscssecseesseeees 19 ADPENDE estes A 21 SPECICATION Sonona rime UT m eases 21 User s Manual SAFETY NOTICE The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits 3 The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It 15 the responsibilities of the user to correct such interference 4 Only use attachments accesories specified by the manufacturer WARNING To prevent fire or shock hazard do not expose the monitor to rain or moisture Dangerously high voltages are present inside the monitor Do not open the cabinet Refe2. FRONT PANEL CONTROL Power Button Press this button to switch ON OFF of monitor s power Power Indicator Blue Power On mode Orange Power Saving mode MENU 1 Turn the OSD menu 2 Enter sub menu when OSD menu 1s ON Adjust A V 1 Invalid when OSD menu is off 2 Navigate through adjustment icons when OSD is ON or adjust a function when function is activated i Button 1 Press this button will start Auto Adjust function when the OSD menu is off The auto adjustment function is used to optimize the horizontal position vertical position clock and phase 2 When the OSD menu 15 off press this button for 5 seconds to select one of the following input source VGA DVI HDMI 3 Exit current menu when OSD 15 ON Hotkeys 1 Power Lock and Unlock Press the MENU and V keys at the same time for 10 seconds to lock or unlock the power button 2 OSD Lock and Unlock Press the MENU and A keys at the same time for 10 seconds to lock or unlock OSD buttons NOTES Do not install the monitor in a location near heat sources such as radiators or air dusts or in a place subject to direct sunlight or excessive dust or mechanical vibration or shock save the original shipping box and packing materials as they will come in handy if you ever have to ship your monitor For maximum protection repackage your monitor as it was originally packed at the facto
3. MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL STATE OR FEDERAL LAWS FOR MORE INFORMATION CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW EIAE ORG FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW LAMPRECYCLE ORG User s Manual BEFORE YOU OPERATE THE MONITOR FEATURES 58 4cm 23 Wide Screen TFT Color LCD Monitor Crisp Clear Display for Windows GP Green Product Ergonomic Design Space Saving Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The E should include the y items Power Cord Warranty Card Quick Start Guide User s Manual VGA Cable Audio Cable HDMI to DVI Cable HDMI Cable DVI Cable Dual link optional optional optional User s Manual INSTALLATION INSTRUCTIONS INSTALL REMOVE Figure 1 Installing and Removing the Base INSTALLATION 1 Carefully place the monitor face down on a soft and flat surface blanket foam cloth etc to prevent any damage to the monitor 2 Align the base with the opening of the stand 3 Snap the base into stand A clear click sound will affirm that the base is connected correctly 4 Verify that the base is securely attached to the stand by looking at the release button of the base 1s fully engaged in the slot of the stand REMOVAL 1 Carefully place the monitor face down a soft and flat surface blanket foam cloth etc to prevent any damage to the monitor 2 Press the release button as indicated 3 Follow the ar
4. enter the B option and adjust the level The auto adjustment function is used to optimize the H POSITION V POSITION CLOCK and PHASE For VGA Input only Select OSD TIME OUT option to set the OSD time out from 5 to 30 seconds Enter the option and adjust the level DISPLAY Select the DISPLAY MODE option to change between Full and Aspect Select the OPTICOLOR option to select optimal mode for Office or Movie or Game 14 User s Manual Select the DCR option to switch the function On or Off Select the ECO option to switch the function On or Off Select the SHARPNESS option to adjust sharpness of the display Set the value from 0 to 100 Select the OD option to switch the function On or Off OTHER SETTINGS Select LANGUAGE option to change the language of the OSD Enter the option and select a language Reference only the OSD Language depends on the selected model Select the INPUT SELECT option to change between VGA or DVI or HDMI source Select the RESET option to reset to the monitor s default setting This will erase the current settings INFORMATION Display Resolution Horizontal frequency Vertical frequency Input source SN number information 15 User s Manual PLUG AND PLAY Plug amp Play DDC2B Feature This monitor 1s equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD It allows t
5. on the monitor cabinet It could short circuit parts causing a fire or electric shock Never spill liquids on the monitor Do not attempt to service the monitor by yourself opening or removing covers can expose you to dangerous voltages and other hazards Please refer all servicing to qualified service personnel The wall socket shall be installed near the equipment and shall be easily accessible User s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem e Due to the nature of the fluorescent light the screen may flicker during initial use Turn off the Power Switch and then turn it on again to make sure the flicker disappears e You may find slightly uneven brightness on the screen depending on the desktop pattern you use e The LCD screen has effective pixels of 99 99 or more It may include blemishes of 0 01 or less such as a missing pixel or a pixel lit all of the time e Due to the nature of the LCD screen an afterimage of the previous screen may remain after switching the image when the same image is displayed for hours In this case the screen 15 recovered slowly by changing the image or turning off the Power Switch for hours e Ifthe screen suddenly flashes erratically or the backlighting fails please contact your dealer or service center for repair Do not attempt to repair the monitor yourself Lamp Disposal LAMP S INSIDE THIS PRODUCT CONTAIN MERCURY AND
6. 0 480 60Hz 720x480p 60Hz 1280 720 60Hz 720 576 50Hz 1280 720 50Hz 1920x1080i 60Hz 1920x1080i 50Hz NN nA BW WN Secondary Video Format Timings MODE RESOLUTION 1 1920 1080 25Hz 2 1920x1080p 30Hz 3 1920x1080p 50Hz 4 1920x1080p 60Hz We ensure that the monitor can be lighted under interlace signal mode but we can not guarantee the image quality 20 User s Manual Digital Signal Input Display Colors Max Resolution Plug amp Play Power consumption Input Terminal Maximum Screen Size Power Source Environmental Considerations Dimensions Weight NW H Frequency V Frequency ON Mode Power Saving Mode OFF Mode APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 58 4 cm 23 Diagonal Pixel pitch 0 2655 mm H x 0 2655 mm W 30 kHz 83 kHz Analog Signal Input V Frequency 55 Hz 76 Hz 30 kHz 138 kHz For Nvidia 3D mode up to 137 86 kHz 56 Hz 120 Hz For Nvidia 3D mode up to 120 Hz 16 7M Colors FULL HD 1920 x 1080 60Hz VESA DDC2B 55W Max lt 2W IW VGA DVI HDMI Hor 509 76 mm Ver 286 74 mm 100 240 1 5A 50 60 7 Operating Temp 5 to 35 C Storage Temp 25 to 60 C Operating Humidity 20 to 90 549 0 W x401 4 H x 191 7 D mm 21 6 W x 15 8 H x 7 5 D 4 9 The above specification is subject to actual product specification and is subject t
7. Check that the signal cable is properly connected If the connector is loose tighten the connector s screws 2 Check the signal cable s connection pins for damage INPUT NOT SUPPORT Your computer has been set to unsuitable display mode set the computer to display mode given in the following table FACTORY PRESET TIMING TABLE VGA AND DVI INPUTS MODE RESOLUTION 1 640x480 60Hz 2 640x480 67Hz 3 640x480 72Hz 4 640x480 75Hz 5 720x400 70Hz 6 800x600 56Hz 7 800x600 60Hz 8 800x600 72Hz 9 800x600 75Hz 10 832x624 75Hz 11 1024x768 60Hz 12 1024x768 70Hz 13 1024x768 75Hz 14 1152x870 75Hz 15 1152x864 75Hz 16 1280x720 60Hz 17 1280x800 60Hz 18 1280x960 60Hz 19 1280x1024 60Hz 20 1280x1024 75Hz 21 1360x768 60Hz 2 1440x900 60Hz 23 1440x900 75Hz 24 1680x1050 60Hz 25 1600x1200 60Hz 26 1920x1080 60Hz 27 1920x1080 60Hz HORIZONTAL FREQUENCY KHz 31 469 35 000 37 861 37 500 31 469 35 156 37 679 48 077 46 875 49 722 48 363 56 476 60 023 68 681 67 500 44 955 49 702 60 000 63 981 79 976 47712 25 955 70 635 65 290 75 000 67 500 66 587 User s Manual VERTICAL FREQUENCY Hz 59 94 66 660 72 809 75 000 70 087 56 250 60 317 72 188 75 000 74 550 60 004 70 069 75 029 75 062 75 000 59 940 59 810 60 000 60 020 75 025 60 015 59 887 75 000 59 954 60 000 60 000 59 934 User s Manual HDMI INPUTS Primary Video Format Timings MODE RESOLUTION 1 64
8. Hanns C LCD Monitor HS233 HSG 1155 User s manual Bedienungsanleitung Manuel de l utilisateur Manuale dell utente Manual de usuario Manual do utilizador Gebruikshandleiding Kullanici elkitabi Podrecznik uzytkownika U ivatelsk p ru ka Felhaszn l i tmutat Eyxeipioio Manual de utilizare Priru nik za korisnike Brugervejledning Anv ndarhandbok Bruksanvisning Kaytt j n ohjekirja 9 A Y aA7M fS FIER AFM APB AEA User s Manual OSD 4 393 Before operating the monitor please read this manual thoroughly This manual should be retained for future reference This device complies with requirement of EMC directive 2004 108 EC with regard to Electromagnetic Compatibility and 73 23 EEC and 93 68 EEC with regard to Low Voltage directive Socket outlet shall be near the equipment and shall be accessible Trademark Notice H Hanns G products incorporate High Definition Multimedia Interface HDMI technology HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries User s Manual RECYCLING INFORMATION We the Hanns G care very much about our environment prot
9. e required is metric M4 10 mm length e The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of the stand base Installing the LCD Monitor requires special skill that should only be performed by qualified service personnel Customers should not attempt to do the work themselves Hanns G bears no responsibility for improper mounting or mounting that results in accident or injury You can ask qualified service personnel about using an optional bracket to mount the Monitor to the wall User s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below 1 Connect one end of the VGA cable to back of monitor and connect the other end to computer s VGA port Connect one end of the DVI cable to the back of the monitor and connect the other end to the computer s DVI port You must use the enclosed dual link DVI cable for 120 Hz and 3D functionality Connect one end of the HDMI to DVI cable optional to the back of the monitor and connect the other end to the computer s DVI port Connect one end of the HDMI cable optional to the back of the monitor and connect the other end to the computer s HDMI port Connect the audio cable optional between the monitor s HDMI Line Out and the external audio amplifier unit Plug one end of the AC power cord to the LCD monitor s AC input socket and the other end to Wall outlet Tur
10. ection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end of life These devices contain recyclable materials which can be re decomposed and re integrated into brand new marvels On the contrary other material can be classified to hazardous and poisoned substances We strongly encourage you to contact the provided information to recycle this product For more information please visit www hannsg com User s Manual TABLE OF CONTENTS SAFETY NOTIOD 5 etnies 5 SPECIAL NOTES ON LCD 6 BEFORE YOU OPERATE THE MONITOR Q uscscsesssescsescssccssccsscssssssecseesssesseesees 7 aO ete 7 CHECKING THE CONTENTS OF THE 7 INSTALLATION INSTRUCTIONS cesscssssssssscssscssccsscssscssecssecssessscssscssecssesseen 8 8 SETTING THE MONITOR ON THE WALL cscscsescssccseccsscscecseccsecsssceseenees 9 MAKING 10 ADJUSTING THE VIEWING ANGLE sccsssssssscssscssscssccssccsscssecscecssesseesseesees 11 OPERATING INSTRUCTIONS
11. he monitor to inform the host system of its identity and depending on the level of DDC used communicate additional information about its display capabilities The DDC2B is a bidirectional data channel based on PC protocol The host can request EDID information over the DDC2B channel THIS MONITOR WILL APPEAR TO BE NON FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY THERE MUST BE A VIDEO INPUT SIGNAL This monitor meets the Green monitor standards as set by the Video Electronics Standards Association VESA and or the United States Environmental Protection Agency EPA and The Swedish Confederation Employees NUTEK This feature 15 designed to conserve electrical energy by reducing power consumption when there 15 no video input signal present When there 15 no video input signal this monitor following a time out period will automatically switch to power saving mode This reduces the monitor s internal power supply consumption After the video input signal is restored full power is restored and the display is automatically redrawn The appearance is similar to a Screen Saver feature except the display is completely off The display 15 restored by pressing a key on the keyboard or clicking the mouse User s Manual TECHNICAL SUPPORT FAQ amp A FOR GENERAL PROBLEMS PROBLEM amp QUESTION Power LED 1s not on No Plug amp Play The display is too dark or too bright Picture bo
12. lick anywhere on desktop and select Properties gt Settings gt Screen Resolution Use the silder to adjust the reslution and click Apply Make sure cable connection 15 correct sure the video input source is HDMI mode Make sure graphic card output is HDMI with audio Make sure PC audio volume is not mute User s Manual Addendum related to Windows 7 When you encounter display problem under Windows 7 you need to do the following 1 Make sure your PC computer Hardware requirement can support Windows 7 2 Make sure your video card can run Windows 7 3 If your video card can support Windows 7 need to install the latest Win 7 driver of your video card Suggest to do the following 1 Install the latest Windows 7 video driver of your video card 2 Try to use the recommended display resolution that 1s supported by the monitor 3 If the recommended display resolution is not working try the second recommended display resolution l 1366 768 50Hz 54 6cm 21 5 16 9 58 4cm 23 16 9 60cm 23 6 16 9 62 5cm 24 6 16 9 70cm 27 5 16 10 1920x1200 260Hz 1920x 1200 50Hz And if you still have display problem after doing the above procedure please visit HANNS G support and Service Website http www hannsg com 1920 1080 60Hz 1920x 1080 50Hz Windows is a registered trademark of Microsoft Corporation ERROR MESSAGE amp POSSIBLE SOLUTIONS CABLE NOT CONNECTED 1
13. n on your monitor and computer Speakers HDMI to DVI Cable optional Player Camcorder Jaco output OR a Game machine OVO VED VCR HOVAR SET TOP BOX HDMI Cable optional Figure 2 Connecting to a PC User s Manual ADJUSTING THE VIEWING ANGLE e For optimal viewing it is recommended to look at the full face of the monitor then adjust the monitor s angle to your own preference e Hold the stand so you do not topple the monitor when you change the monitor s angle e You are able to adjust the monitor s angle from 5 to 15 5 1 5 4 Figure 3 Monitor Angle NOTES e Do not touch the LCD screen when you change the angle It may cause damage or break the LCD screen e careful not to place fingers or hands near the hinges when tilting the monitor otherwise pinching can result User s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off The other control buttons are located on the front panel of the monitor See Figure 4 By changing these settings the picture can be adjusted to your personal preferences e The power cord should be connected e Connect the Signal cable from the monitor to the VGA card e Press the power button to turn on the monitor The power indicator will light up MENU V Figure 4 Control Panel Buttons 12 User s Manual
14. o change without prior notice NOTES The Maximum Resolution will depends on the display card supporting Related issue can refer to www hannsg com FAQ section 21
15. r servicing to qualified personnel only PRECAUTIONS Do not use the monitor near water e g near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement Do not place the monitor on an unstable cart stand or table If the monitor falls 1t can injure a person and cause serious damage to the appliance Use only a cart or stand recommended by the manufacturer or sold with the monitor If you mount the monitor on a wall or shelf use a mounting kit approved by the manufacturer and follow the kit instructions Slots and openings in the back and bottom of the cabinet are provided for ventilation To ensure reliable operation of the monitor and to protect it from overheating be sure these openings are not blocked or covered Do not place the monitor on a bed sofa rug or similar surface Do not place the monitor near or over a radiator or heat register Do not place the monitor in a bookcase or cabinet unless proper ventilation 1s provided The monitor should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company Unplug the unit during a lighting storm or when it will not be used for long period of time This will protect the monitor from damage due to power surges Do not overload power strips and extension cords Overloading can result in fire or electric shock Never push any object into the slot
16. row direction to remove the base POWER POWER SOURCE 1 Make sure that the power cord is the correct type required in your area 2 This LCD monitor has an Internal universal power supply that allows operation in either 100 120V AC or 220 240V AC voltage area No user adjustment is required Connect the AC power cord one end to your LCD monitor s AC input socket the other end to wall outlet User s Manual SETTING THE MONITOR ON THE WALL DISSEMBLING THE STAND BASE 1 po Disconnect all the cables and cords from the Monitor to prevent damage Carefully place the monitor face down on a soft and flat surface blanket foam cloth etc to prevent any damage to the monitor Press release button as indicated follow the arrow direction to remove the base Remove the three 3 screws so that the stand cover can be removed Remove the three 3 screws so that the hinge assembly can be removed For reference only WALL MOUNTING THE MONITOR 1 Purchase VESA compatible wall bracket VESA 100x100 4 holes M4 10 mm 8 kg 2 Locate your ideal Monitor position on the wall 3 Fix the wall bracket firmly on the wall 4 Secure the Monitor to the bracket using the 4 mount holes on the back and center of the Monitor Note Please read the instructions of your specific wall bracket to properly wall mount the Monitor e The pitch of the mounting holes is 100 mm horizontally and 100 mm vertically e The screws typ
17. ry To keep the monitor looking new periodically clean it with a soft cloth Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution Never use strong solvents such as thinner benzene or abrasive cleaners since these will damage the cabinet As a safety precaution always unplug the monitor before cleaning it User s Manual HOW TO ADJUST A SETTINGS PICTURE Adjust the brightness value of the display according to your preference Select BRIGHTNESS option to adjust the brightness value Adjust the contrast value of the display according to your preference Select CONTRAST option to adjust the contrast value Select the H POSITION option to shift the screen image to the left or right Enter the option and adjust the level For VGA only Select the V POSITION option to shift the screen image up or down Enter the option and adjust the level For VGA only Select the PHASE option to automatic optimize image For VGA only Select the CLOCK option to reduce the vertical flicker of characters on the screen Enter the option and adjust the level For VGA only Adjust the color temperature value of the display according to your preference 9300 7500 6500 sRGB USER If you select USER option 1 To adjust the red enter the R option and adjust the level 2 To adjust the green enter the G option and adjust the level 3 To adjust the blue
18. unces or a wave pattern 1s present the picture The power LED is ON blue but there s no video or no picture Missing one of the primary colors RED GREEN or BLUE Screen image 1s not centered or sized properly Picture has color defects White does not look white The screen resolution needs to be adjusted No HDMI sound is outputted from monitor s audio line out POSSIBLE SOLUTION Check if the Power Switch is in the ON position Power Cord should be connected Check if the PC system is Plug amp Play compatible Check if the Video Card is Plug amp Play compatible Check if any plug pins on the VGA DVI or HDMI connector are bent Adjust the Contrast and Brightness Controls Move electrical devices that may cause electrical interference Computer Power Switch should be in the ON position Computer Video Card should be snugly seated in its slot Make sure monitor s video cable is properly connected to the computer nspect monitor s video cable and make sure none of the pins are bent Make sure computer is operational by hitting the CAPS key on the keyboard while observing the CAPS LOCK LED The LED should either turn ON or OFF after hitting the CAPS LOCK key nspect monitor s video cable and make sure that none of the pins are bent Adjust pixel frequency CLOCK or press i Button Adjust RGB color or select color temperature Use win 2000 ME XP Right c
Download Pdf Manuals
Related Search
UserManual_HS233H_EN_V1.0.