Home

GB - LeoVince

Contents

1. O o o o o o o o ao o olol In the options window the available settings are divided into four groups GENERAL LAYOUT SHORT CUT ADVANCED 15 1 GENERAL Through this window it is possible to set a number of preferences relating to the functioning of the FAST software Options Seles General Layout Shortcut Advanced Communication information Language Port USB English United Kingdom w Baud Rate AAA Timeout 5 Write Timeout ms Retry Timeout ma E Mapping Directory Documents and euna Marne Firmware directory Ia _ CAProgrammisSitoGroup FAST Il Debug 2 5 Finmware Browse Formula Factor preset E aA Decimal precizion 0 D Automated Real Time Start Language using the top right selector you can select the language in which the various messages and the various icons will be displayed to the user Communication information in the top left box it is possible to select manually the communication port used by the FAST control unit For the automatic setting see cha
2. In the top left area you can change the setting of the colors used in the cells of the table and the graph Changed cells selection of the color you wish the cells that have been changed to be displayed in Frozen cells selection of the color you wish the frozen cells to be displayed in see chapter 14 ADDITIONAL INFOR MATION Selected cells selection of the color you wish cells to be displayed in when they have been selected This selection also allows you to set the color of the characters in these cells by selecting the box in the foreground column Graph external area allows you to change the color of the external area of the graph Point markers change allows you to vary the color the points that have been changed are highlighted in when being displayed on the graph Graph area allows you to change the background colors of the graph area In the top right area you can change the color of each of the curves with which the columns of the injection table are shown The first column is the column corresponding to 0 TPS and the second is the one immediately to its right and so on until you reach the last one The eleventh is the 100 TPS column With the Reset default colors button you can bring back all the color settings to their original state i e as when the application is started up for the first time after installation This button however refers exclusively to the colors and will not restore
3. TPS 0 TPS 80 TPS 90 IPS 1002 mg 0 0 You can change the graph display on both axes by right clicking on the desired axis and dragging the mouse while hold ing down the button On the x axis a movement of the mouse to the right corresponds to an increase in the definition of the x axis scale and a movement to the left corresponds to a reduction in it On the y axis you obtain an increase in the detail displayed with an upward movement and a reduction in it with a downward movement keeping the right mouse button pressed down You can move the graph in any direction by right clicking on the inside area of the graph and while keeping the button pressed down moving the mouse in the direction in which you want to move the graph 23 You can also select one or more points on the graph as well as on the table do this you must left click on the area of the graph and keeping the button pressed down drag with the mouse to create a square To select the desired points you must make sure they are inside the square and then release the mouse button A mod amp RB d amp di 2000 6000 7 0 enun 10000 11000 12000 12000 To change the points selected you can use the and keys as you do for the map table or use the mouse By holding down the CONTROL CTRL key of the keyboard and moving the mouse up or down you can move all the GB selected points on the graph together in the des
4. Revision 2 00 1 july 2011 USER MANUAL FASTII INTERFACE CONTENTS INTRODUCTION WARNINGS 3 SYSTEM REQUIREMENTS O fF 10 12 53 14 16 17 18 19 20 21 3 1 MINIMIMUM REQUIREMENTS 3 2 RECOMMENDED REQUIREMENTS INSTALLATION COMMUNICATION PORT SETTING MAIN SCREEN MAP TABLE CONTROL BARS GRAPH AREA MAP SELECTION SETTINGS NOTES AND EXPLORE MAPS 10 1 MAP SELECTION 10 2 REV LIMITER SELECTION 10 3 PRIVATE MAP SELECTION 10 4 NOTES 10 5 EXPLORE MAPS GRAPH COMPARISON TPS CALIBRATION MAP CONSTRUCTION ADDITIONAL INFORMATION 14 1 STANDARD MODE AND ADVANCED MODE 14 2 CELLS IN CLOSED LOOP 14 3 CONTROL UNIT CONFIGURATION CONFIGURATION 15 1 GENERAL 15 2 LAYOUT 15 3 SHORT CUT 15 4 ADVANCED REAL TIME UPDATING THE FIRMWARE FAST SHIFT NEWS AND AUTOMATIC SOFTWARE UPDATING INFORMATION ON THE SOFTWARE ON LINE HELP APPENDIX 1 LIST OF SHORTCUTS APPENDIX 2 GLOSSARY APPENDIX 3 GENERAL WARRANTY CONDITIONS 2 aA CO RO ND O NO RO NY CON NN amp CO Q CO CO CO CO oNN KR RR BR BR mK NM OQ a aon KR A CON O A N O CO O 1 INTRODUCTION Dear Customer We would like to thank you for choosing our product and provide you with information to help you understand of the absolutely exclusive product you just bought In o
5. ers corresponding to the three positions of the map switch and finally within each position of the switch you can find the injection map s and the spark advance map Ej Desktop ai Document H E Hisarse del computer 9v Leggi Fast see Disco locale 8 05 Documents and Settings E flaviob oy Documenti zip Maps i Leggi Fast 3 9401 Yamaha YZF RE 2008 2 3402 Honda CBR 1000 AA Ela Switch Maps 1 o Ignition 0 Switch Maps 2 yee Switch Maps 3 Select a file to display preview Browse Maps If you select an individual map a preview of it appears in the lower half of the bar By means of the selector in the central part of the side bar circled in red in the figure opposite you can select between different modes of preview graph display table display or notes field display You can copy part of the map displayed in the Explore Maps preview in the table display mode onto the map currently being used in the Map Table Simply select the cells in the preview you want to copy and by using the Copy Paste func tion and selecting the appropriate cells in the Map Table the desired cells will be copied into the current map It is also possible to copy an entire map into the Map Table Simply select a map in the Explore Maps window by left clicking onto it and keeping the button pressed down drag the icon of the selected map onto the Map Table At this point when you release the left button the dragged
6. 7 250 0 0 0 0 1 3 0 1 3 5 24 7 500 0 0 0 0 2 5 3 6 2 5 25 7 750 0 0 0 0 3 7 10 6 7 3 10 26 8 000 0 0 0 2 4 8 13 6 a 10 27 8 250 0 0 0 0 3 6 8 2 3 2 10 28 8 500 0 0 0 0 1 3 5 0 0 1 5 29 8 750 0 0 0 0 0 2 2 5 7 33 5 30 9 000 0 0 0 0 2 4 3 14 37 24 31 9 250 0 0 0 2 5 10 6 24 24 20 0 32 9 500 0 0 1 3 6 12 6 20 20 22 5 33 9 750 0 0 1 3 6 13 16 22 15 19 5 34 10 000 0 0 0 2 4 9 20 20 13 26 5 35 10 250 0 0 0 2 4 8 14 20 18 28 5 36 10 500 0 0 0 0 2 4 37 20 13 38 5 37 10 750 0 0 0 0 0 1 16 27 16 26 5 38 11 000 0 0 0 0 0 0 24 24 16 26 5 29 31 N n n n n 22A 22A 16 79 5 M gt M Fogliol Foglio2 Foglio3 Pronto If in the Excel sheet you also select the RPM column when carrying out the COPY function and then use the PASTE RPM function from the drop down edit menu you will not need to worry about selecting the correct area in the FAST software Select All Formula Graph Table This way the FAST software will automatically see to copying the selected values in the cells selected in Excel according to the RPM values in the selection at the time of the COPY operation TPS TPS TPS TPS TPS TPS TPS 20 40 60 TU RPM TPS 0 TPS 2 5 Moo s s so 5 8 CONTROL BARS In the control bars icons are shown that represent the various functions available in the software By using the it
7. H Documenti Maps Leggi Fast 9401 Yamaha YZF 2008 2008 fsk 5 2 9402 Honda CBR 1000 RR 2008 2009 fsk E we Switch Maps 1 ew 1 _ 47 Ignition Eys Switch Maps 2 Eys Switch Maps 3 3 Ignition E 9403 SUZUKI GSX R 1000 2009 2010 fsk gt 9404 HONDA CBR 600 RR 2003 fsk gt 9405 SUZUKI GSX R 600 2008 2008 fsk 9408 YAMAHA YZF R1 2010 fsk gt 9409 KAWASAKI ZX 6R 2009 fsk ral 9410 HONDA CB 600 HORNET 20083 fsk mE p 9411 KAWASAKI Z 750 20T0 RSK a 0 2 TPS5X 5 10 TPS15 TPS20 TPS40 TPS60 580 TPSS0z 105 8 Risorse di rete 11 amp 23 Fast Injection c e e Oo eo ha 4 1 4 e lejelejeilejelejeileojelo 2 suilz jeleleilejleiejeiejelejeio Select a file to display preview zx eo be na 4 4 4 4 4 i lac lacs recu lac tee mc re eS pes Beis nc 0 Bese c c c 0 See pc iq r t T l 1 T _ olo Bee ec cr ae OS m mur ko m Close As in the main windo
8. map will be pasted onto the Map Table N B It is important for the correct working of the Copy Paste operations that the destination maps be of the same map type as the source maps i e that they are both injection maps or both spark advance maps ae Documenti 8 y Risorse del computer 0 906 Leggi Fast see Disco locale H E Documents and Settings flaviob Documenti Maps 996 Leggi Fast z 9401 amaha YZF 2008 9402 Honda CBR 1000 RR Switch Maps 1 ie y Ignition Eg Switch Maps 2 Algae Switch Maps 3 9403 SUZUKIGS A 1000 9404 HONDA CBR 600 RR z 9405 SUZUKI GSx F 00 2 9408 YAMAHA YZF R1 201 v 9409 KAWASAKI ZX BR 20 gt Graph Notes S000 Tools Browse Maps 3 11 GRAPH COMPARISON By using this function you can compare maps of the same file or of different files C Documenti Risorse del computer Leggi Fast 4 Se Disco locale C Documents and Settings amp 259 flaviob B Compare 8 00 Documenti 5 0 Maps Leggi Fast E 9401 Yamaha YZF RG 2008 2008 fsk gt 9402 Honda CBR 1000 RR 2008 2003 fsk gt 9403 SUZUKI GSX R 1000 2009 2010 fsk gt 9404 HONDA CBR 600 RR 2009 fsk E 9405 SUZUKI GSX R 600 2008 2009 fsk E 9408 YAMAHA YZF R1 2010 fsk E 9409 KAWASAKI ZX 6R 2009 fsk E 9410 HONDA CB 600 HORNET 2009 fsk E 9411 KAWASAKI 2 7
9. INDUSTRIALE S p A is not aware In order to avoid prob lems that could jeopardize correct and safe use of our products please make the appropriate verifications such as for example any irregularity in delivery of power functioning detects etc 5 61 9 Revision 2 00 july 2011 ELECTRONIC SYSTEMS
10. Shift Advanced 130 Kill Time You can enable the FAST Shift electronic gear shift by putting a tick in the Fast Shift box Management of the shift kill time parameters for the electronic gear shift can take place in two modes Basic or Advanced You can select the mode by putting a tick in the Advanced box or removing it In Basic mode only one kill time is available with which it is possible to lengthen or shorten the gear shift time through out the whole range of the FAST Shift functioning 5 In Advanced mode you can adjust the kill time depending on RPM and the throttle position by using the special table for it See the following image File Properties Standard Fast Shift Fast Shift Advanced TPS TPS E EJ A Kill Time lt 70 Kill Time ms 8p Kil Time mz EE EE Kill Time ms El E Kill Time ms a The first column allows you to change the RPM areas for which you wish to set the Kill Time The first row allows you to change the areas relating to the amount of throttle valve opening TPS for which you wish to set the Kill Time The Kill Times in the second column are used when the TPS value is within the first area i e taking the above picture as an example for TPS values between 5 and 29 The Kill Times in the third column are used when the TPS value is in the second area i e taking the above
11. The cell that is nearest to the present state of the functioning of the engine is indicated with a blue box around it By using the INSTANT CHANGES button you can de activate the changes currently being used and the FAST Il control unit will go back to using the initial map d 17 UPDATING THE FIRMWARE To avoid damaging the FAST control unit switch off the engine before proceeding to update the Firmware You can access the screen for updating the firmware by using the UPDATE FIRMWARE item in the TOOLS drop down menu as shown in the following picture Compare Create TPS Options calibration ELECTRONIC SYSTEMS Map Selector Map Switch 1 v 2000 4000 7000 sooo 9000 10000 11000 12000 13000 14000 15000 rev limiter function Protection Mapping not protected RPM TPS 0 TPS 02 TPS 04 TPS 0 TPS 0 TPS 04 TPS 02 TPS 0 TPS 04 TPS 0 TPS 02 Protect o o o o o o o 1 000 1 500 o 2 000 2 500 3 000 3 500 4 000 o o o o ao ao 4 500 5 000 5 500 o o o o o o o o o o o o o o o o o o o o o o o o o o o 48 While downloading the firmwareDO NOT start the engine DO NOT exit the application AND DO NOT disconnect the wiring or the
12. This copies the currently displayed table including the RPM column and the TPS index into the Windows clipboard This copies the values of the selected cells into the Windows clipboard This pastes the values of the cells on the Windows clipboard into the table This pastes the values of the cells on the Windows clipboard automatically detecting the position of the cells to be pasted according to their RPM and TPS without it being necessary to select those cells manually This activates the FORMULA function window in which you can choose mathematical operations to be car ried out on the currently selected cells This inserts a new row between the currently selected row and the previous one The values adopted by the new row are arrived at by interpolation of the values in the two adjacent rows Deletes the currently selected row Below is the VIEW control bar where all the icons concerned with displaying the Table and the Graph can be found and the operation of each icon in it will be explained below Fast 2 5 Maps read from control unit Tables True Selection When this is selected the software works in standard mode i e a single injection map is used for all the cylinders See paragraph 14 1 STANDARD MODE AND ADVANCED MODE When this is selected the sottware works in advanced mode i e a different injection map is used for each cylinder See paragraph 14 1 STANDARD MODE AND ADVANCED MODE This a
13. control unit in order to avoid damage to the FAST control unit Firmware current firmware information Firmware Version 008 At this point the UPDATE FIRMWARE window will appear from which it is possible to select via the WRITE FIRMWARE button the firmware you wish update the FAST control unit with Once the firmware has been selected its download onto the control unit starts automatically Note that you are not allowed to update the FAST control unit with a different type of firmware from the one that is resi dent in it e g from 5 to 5 or with a previous version e g from TAOO5 to 4 During the updating operation the progress bar will gradually be filled current firmare information Firmware Version 008 Wite Firmware Cancel 49 18 FAST SHIFT Improper settings of the parameters of the FAST SHIFT feature can cause damage fo the transmission gearbox or clutch of the vehi cle You can access the screen for managing the electronic gear shift by selecting the PROPERTIES icon from the TOOLS menu as shown in the following picture Head write FAST Shift Send Export Send RealTime Auto tracking One Two Three Configuration Modification Modification FAST Se e gt 1 e ee Then select the FAST Shift panel in the properties window File Properties fe E Standard Fast Shift Fast
14. maps provided by SITO GRUPPO INDUSTRIALE S p A please note that extreme values of degrees of ignition advance can cause engine damage Please be careful and stop riding immediately in case of an abnormal engine operation such as but not limited to any irregularities in power running various defects etc The modification of the maps used by the FAST control unit without the necessary knowledge or if performed by unqual itied personnel can cause the vehicle to stall or otherwise malfunction This may cause serious injury or death When creating and editing maps be advised that extreme values in the air fuel ratio can cause engine damage This may not be determinable in advance as it is based on different variables including different types of motorcycles This may also cause the vehicle to stall or otherwise malfunction This may cause serious injury or death When creating and editing maps be advised that extreme values in the degrees of ignition advance can cause engine damage This may not be determinable in advance as it is based on ditferent variables including different types of motor cycles This may also cause the vehicle to stall or otherwise malfunction This may cause serious injury or death Modifying and increasing the rev limiter can cause damage to the engine and as a result serious injury or death Changing the calibration of the TPS used by the control unit without the necessary knowledge or if performed by unqual itied per
15. need to use the MAP CONSTRUCTION function You can find the MAP CONSTRUCTION function on the TOOLS control bar see chapter 8 CONTROL BARS Using Explore Maps on the lett side of the window you can choose the maps to be put into the three available positions of the map switch The maps can be selected by loading them from the control unit loading them from one or more files saved on the Personal Computer or by a combination of the two rrr New Mapping Yamaha YZF R6 2008 2008 Corsa full system with dB Killer fsk Yamaha YZF 2008 2009 Corsa full system without dB Killer fsk Yamaha YZF 2008 2009 Factory Factory full system with dB Killer fsk Yamaha YZF 2008 2009 Factory Factory full sustem without dB Killer fsk Yamaha YZF R6 2008 2009 FACTORY OVAL GPSTYLE slip on with dB Killer fsk Yamaha YZF 2008 2003 FACTORY OVAL GPSTYLE GPPRO slip on without dB Killer fsk Yamaha YZF 2008 2009 GPPRO slip on with dB Killer fsk Honda CBR 1000 RR 2008 2009 Factory Factory Corsa full system with dB killer fsk EY Position 1 Injection DNUS Ignition DNUS Honda CBR 1000 RR 2008 2008 Honda CBR 1000 RR 2008 2008 Honda CBR 1000 RR 2008 2008 Honda CBR 1000 RR 2008 2008 Factory Factory Corsa full system without dB killer fsk FACTORY FACTORY A OVAL slip on with dB killer fsk FACTORY FACTORY A OVAL GPPRO
16. options window where you can configure many graphics and functional aspects of the FAST software See chapter 15 CONFIGURATION This allows you to access the window for updating or reprogramming the firmware on the FAST control unit See chapter 17 UPDATING THE FIRMWARE There is also another bar which is always in the foreground It is called RAPID ACCESS and is on the title bar of the main window of the FAST software top left corner You can add an icon to the RAPID ACCESS bar by simply right clicking on the icon you want to add and selecting the item Add to Rapid Access You can similarly delete an unwanted icon from the RAPID ACCESS bar by right clicking on the icon to be removed and selecting the item Remove from Rapid Access In RAPID ACCESS the previously explained Open Save and Options icons are present as default icons The only new icon is the FAST button and this unlike the other RAPID ACCESS icons cannot be deleted By means of the FAST button you can access a drop down menu in which there are the following items Exit FAST information Guide and News See chapters 16 INFORMATION ABOUT THE SOFT WARE and 21 ON LINE HELP LN 9 GRAPH AREA When creating and editing maps be advised that extreme values in the air fuel ratio or degrees of ignition advance can cause engine damage This may not be determinable in advance as it is based on different variables including dif
17. picture as an example for TPS values between 30 and 49 and so on until you reach the last column in which the Kill Time values are used for TPS values higher than or equal to the last percentage value i e greater than or equal to 95 For values lower than the first percentage value 5 in the example the electronic gear shift is de activated The same band identification method is used for engine revs RPM and so continuing to follow the same example the first row is used for RPM between 4000 revs minute and 5000 revs minute the second row for RPM between 5000 revs minute and 6000 revs minute and so on until you reach the last row which is used for revs higher than 13000 revs minute For RPM values lower than 4000 revs minute the electronic gear shift is deactivated 19 NEWS AND AUTOMATIC SOFTWARE UPDATING When the application is started if the computer has an active internet connection the product news and FAST news on the www leovince com website appear in the screen area where the map tables are normally seen It is possible to disable this function from the advanced panel of the options window see chapter 15 CONFIGURATION FAST II Open Save Read Write properties FAST Shift Send Export Send Send RealTime Auto tracking Two Three Configuration Modification Modification ELECTRONIC SYSTEMS Map Selector Map Switch 1 v 2000 4000 6000 7000 sooo 9000 10000 11000 12000 13000
18. the processing system to manage the engine correctly Revolutions Per Minute acryonym H the engine speed unit of measurement Switch Three position switch for selection of the maps stored in the control unit memory also called map selector Acronym that indicates Throttle Position Sensor Universal Serial Bus indicates a serial communication protocol 057 APPENDIX 3 GENERAL WARRANTY CONDITIONS 3 IWARRANTY SITO GRUPPO INDUSTRIALE S p A guarantees its products in compliance with current standards In particular the warranty covers conformity defects by repair or replacement within a reasonable time Subject to a request from the consumer to repair or replace the item SITO GRUPPO INDUSTRIALE S p A shall assess whether the solution requested be excessively demanding in relation to the other solution Repair and replacement shall be without additional costs for the consumer subject to the possibility for SITO GRUPPO INDUSTRIALE S p A to examine the defective product To apply the warranty the consumer is to have a proper receipt of payment and notify the conformity defects within one month of being found The warranty has a duration of two years as from delivery of the product Replaced parts or products under the warranty shall become property of SITO GRUPPO INDUSTRIALE S p A 3 2 EXCLUSIONS The warranty offered by SITO GRUPPO INDUSTRIALE S p A does not cover a parts used in sporting eve
19. the tables in the map file currently displayed by the FAST software onto an Excel GB This allows you to attach the map file currently displayed by the FAST software to an e mail During Real Time operation this allows you to send the changes made to the map to the RAM memory of the control unit See chapter 16 REALTIME This allows you to enable or disable the changes made to the map during Real Time operation See chapter 16 REAL TIME When this is activated during Real Time operation the table scrolls automatically A cursor follows the RPM and TPS cell that the bike is currently operated in real time See chapter 16 REALTIME When this is selected the maps displayed in the graph and in the table are those relating to position 1 of the map switch When this is selected the maps viewed in the graph and the table are those relating to position 2 of the map switch When this is selected the maps viewed in the graph and in the table are those relating to position 3 of the map switch Below is the EDIT control bar in which all the icons concerning changes to or editing of a map can be found e g Copy Paste Insert Row and the operation of each icon in it will be explained below j Undo Redo Copy Copy Paste Paste Insert Delete T able Hpm Undo the last action or actions that you made Redo actions that you undid
20. 0 0 0 0 0 0 o o o o o o o O o o A CONTROL See chapter 8 CONTROL BAR GRAPH AREA See chapter 9 GRAPH AREA C MAP TABLE See chapter 7 MAP TABLE D SELECTION AREA See chapter 10 MAP SELECTION SETTINGS AND NOTES E NOTES AREA See chapter 10 MAP SELECTION SETTINGS AND NOTES F TITLE BAR in the TITLE BAR if the file is held on the Hard Disk of the Personal Computer it is possible to see the path and the name of the mapping file which is being worked on or if the mapping has been read from the FAST II control unit it is possible to see the wording Maps read from the Control Unit G STATUS BAR on the STATUS BAR you can see the function mode of the Software whether it is Standard or Advanced and the PROGRESS BAR for when reading and writing the mapping file On the main screen the injection table or the graph area can be re sized for a better visibility of either of them by sim ply left clicking on the separation line between the table and the graph and while keeping the button pressed down dragging the mouse up to enlarge the space in the table at the expense of the graph or down to enlarge the space given to the graph at the expense of the table 9 7 MAP TABLE The modification of the maps used by the FAST control unit wi
21. 011 LeoVince FAST II Injection FAST Shift dyno mapping of Kawasaki ZX 10R Ninja 2011 with LeoVince SBK Factory R E approved EVO II slip on Protect The LeoVince SBK Factory R E approved EVO II Slip on for Triumph Speed Triple 1050 2011 the sound of LeoVince Factory R exhaust LeoVince gives voice to Super T n r of Davide Biga during his tour around the world come on Davide Davide uses the Factory E approved EVO II Slip On LeoVince SBK LV One Approved EVO II for Suzuki GSR 750 2011 Silencing body and collector tube in stainless steel AISI 304 LeoVince X3 Silencer 2 Strokes for KTM 300 EXC 2011 In the information window you can find Fast Il Version e The version number of the FAST software product information 30324146 4953 352d 3132 37 3638353730 The e mail address fast leovince com at which you for information about the product please can ask for further information about products and tech contact us at j nical support for FAST control unit and the FAST soft ware e Our Internet website address www leovince com ELECTRONIC SY STEMS Thanks to for information about the product please contact us at http www The docking library suite http sourceforge net projects dockpanelsuite OLE Structured Storage Classes http www mvps org emorcillo en indes shtml Wizard control http www codeproject com cs library WizardD
22. 04 TPS 50 TPS 604 TPS 75 TPS 904 r Fuel Change o Crit ignition Change a Bi P Pp O O O OJ O O O O OJ O Any changes made to the map are highlighted in orange and by using the SEND CHANGES button on the toolbar you can send the changes to the FAST control unit which will instantly see to applying them If changes are made and those changes are not sent to the control unit the software indicates the presence of those changes that are still to be sent by means of a message on the title bar of the table as shown in the figure below There are modified cells still unsent Injector 1 RPH TPS 04 TPS 24 TPS 54 5 144 TPS 302 TPS 402 TPS 504 TPS 602 TPS 754 TPS 904 MU 3 46 Note that all the changes that are made to maps and sent to the FAST Il control unit via the SEND CHANGES function are not definitively saved but reside in the RAM memory of the control unit If you wish to save the changes it is neces sary to save to a file by using the SAVE button before exiting the software to save it onto the hard disk or to save it by using the WRITE button to send it definitively onto the control unit thus overwriting the initial maps By using the FOLLOW icon you can activate the function that during Real Time operation allows the table to scroll auto matically always keeping itself centered on the RPM and TPS values adopted moment by moment by the engine
23. 14000 15000 rev limiter function Protection Mapping not protected LeoVince FAST II Injection for Kawasaki ZX 10R Ninja Nessun news dal mondo Fast disponibile 201 otect LeoVince FAST II Injection FAST Shift dyno mapping of Kawasaki ZX 10R Ninja 2011 with LeoVince SBK Factory R E approved EVO II slip on The LeoVince SBK Factory R E approved EVO II Slip on for Triumph Speed Triple 1050 2011 the sound of LeoVince Factory R exhaust LeoVince gives voice to Super T n r of Davide Biga during his tour around the world come on Davide Davide uses the Factory E approved EVO II Slip On LeoVince SBK LV One Approved EVO for Suzuki GSR 750 2011 Silencing body and collector tube in stainless steel AISI 304 LeoVince X3 Silencer 2 Strokes for KTM 300 EXC 2011 P gt To close the NEWS window and display the map tables simply click on the cross x in the top right corner of the window itself By using the drop down menu that can be accessed by clicking on the FAST icon in the top lett corner of the main screen of the FAST sottware you can make the NEWS window appear again Information about FAST Guide News Update Maps andFimwere Update Fast Il From the same drop down menu if there is an active internet connection you can update the database of the maps and firmware of the software by clicking on Update Maps and Firmware The firmware downloaded in this way wil
24. 2 Injection ignition Position 3 Injection ignition Notes Protection Protect Version Bs Maps ov 9401 Yamaha YZF 2008 2009 Corsa full system with dB Killer fsk B we Map Switch 1 oW Inj c4 Ignition Injection 5118 1 Bw Map Switch 2 gee Map Switch 3 A SE 9401 Yamaha YZF 2008 2009 Corsa full system without dB Killer fsk Ignition E 9401 Yamaha YZF 2008 2008 Factory Factory R full system with dB Killer fsk BE 9401 Yamaha YZF 2008 2008 Factory Factory R full system without dB Killer fsk gee Map Switch 1 Eya Map Switch 2 ye stents Injection 9401 Yamaha YZF 2008 2009 FACTORY OVAL GPSTYLE slip on with dB Killer fsk E 9401 Yamaha YZF 2008 2009 FACTORY OVAL GPSTYLE GPPRO slip on without dB Killer fsk E 9401 Yamaha YZF 2008 2009 GPPRO slip on with dB Killer fsk ign ition Eya Map Switch 1 B we Map Switch 2 gee Map Switch 3 gt 9402 Honda CBR 1000 RR 2008 2009 Factory Factory Corsa full system with dB killer fsk P 3402 Honda CBR 1000 RR 2008 2009 Factory Factory Corsa full system without dB killer fsk In jection 9402 Honda CBR 1000 RR 2008 2009 FACTORY FACTORY OVAL slip on with dB killer fsk gt 9402 Honda CBR 1000 RR 2008 2009 FACTORY FACTORY OVAL GPPRO GPSTYLE slip on without dB killer f gt 9402 Honda CBR 1000 RR 2008 2009 GPPRO GPSTYLE slip on with dB killer fsk gn gt 9403 Suz
25. 2009 skull 1 9407 Kawasaki Minja ZX 10R 2010 mappa O FskFull Bl 9400 YAMAHA YF R1 2009 2010 FskFull 2 9409 Kawasaki 2X 6R 2009 2010 fskful Iz 3410 Honda CB 600 Hornet 2008 2009 Fskfull 9411 KAWASAKI 2 750 2009 2010 Fskfull is ous Suzuki 55 600 2010 Fskfull E 9413 Yamaha YZF R6 2010 Fskfull 3414 Honda CBR 1000 2010 fskfull 9415 HONDA CB 1000 R 2008 Desktop Documenti del computer Nome file 19409 Kawasaki 7 2009 2010 fskfull v Risorse di rete Tipo file Fast I configuration 1 MED M n 15 CONFIGURATION You can access a configuration screen of the software through the OPTIONS item in the drop down menu under TOOLS as shown in the following picture ec AC ya c Compare Create TPS Iptions Update calibration ELECTRONIC SYSTEMS Map Selector Map Switch 1 v 2000 4000 6000 7000 9000 10000 12000 13000 14000 15000 rev limiter function Protection Mapping not protected RPH TPS 0 TPS 02 TPS 04 TPS 04 TPS 04 TPS 0 TPS 04 TPS 0 TPS 04 TPS 02 TPS 04 Protect o o o o o o o o o o o 1 000 1 500 2 000 2 500 3 000 3 500 4 000 4 500 5 000 5 500 0 O O O o
26. 3 5 4 44 Graph 7 O 1 8 4 Enter cell value Copy Table 1 8 2 5 To delete one or more rows simply select the row or rows to be deleted and right click on the table area to make the drop down edit menu appear From the edit menu you must select the item TABLE and then DELETE ROWS You can carry out work on the table by selecting a single cell one or more columns one or more rows or an area If you key in a value the value you choose will be applied to the whole selection furthermore it is possible to increase or decrease by a percentage point for the injection tables or by half a degree for the spark advance table the value set in the selected cells by using the Page UP and Page DOWN keys of the keyboard respectively On the table it is possible to copy and paste blocks of cells by using the right button of the mouse and selecting copy paste in the drop down menu n Any changed cell will become orange in color to show that it has been changed The different coloring will stay until the changes made have been saved on the PC or the control unit The bottom lett corner of each cell shows what change has been applied to the cell compared to the last time the file was saved Using the drop down edit menu and selecting FORMULA you can also carry out mathematical operations on the select ed cells Copy Paste Paste Rom Select A
27. 50 2010 fsk E Desktop ES E Compare Maps amp J Risorse di rete amp 73 Fast Injection amp C Varie 1000 1500 2000 2500 3000 3500 4000 4600 5000 5500 6000 6500 7000 7500 RPM TPSO TPSO 507 TPS0 TPSO TPSU0Z TPSO TPSU0Z TPSO0X TPS0 TPSO Select a file to display preview In Explore Maps on the left side of the window you can choose the two maps to be compared The maps can be select ed by loading them from the control unit by loading them from one or more files saved on the Personal Computer or by a combination of the two To select them simply drag them keeping the mouse button pressed down until the pointer is over the box marked with the letter A or B Once the maps you wish to compare have been selected it is possible to evaluate the differences between them by click ing on the compare button Compare Maps The result of the difference between the map in container A and the map in container B is displayed in the table subtract ing map B from map A If you select a column in the table an overlay can be seen in the graph area of the curves of the two maps relating to the TPS value of the column selected The curve of the map selected in position A will be RED while the one relating to the map in position B will be GREEN oa EZ Documenti 8 Risorse del computer Compa re Maps 7X Leggi Fast amp Disco locale A 9 125 Documents and Settings ren
28. F12 Shift F12 CTRL CTRL 2 CTRL 3 SHIFT F 1 CTRL F SHIFT F2 CTRL F2 F F8 FII F12 ALT Shortcuts specific to the mapping table Shortcut Arrow Keys SHIFT Arrow Keys CTRL PagUp CTRL PagDown PagUp PagDown APPENDIX I LIST OF SHORTCUTS Action Send Changes Real time Instant Changes Real time Follow Real time Exit Copy Paste Paste RPM Formula Copy table Mapping file properties Read Fast Write Fast Open map from hard disk Write map to hard disk Select Map 1 Select Map 2 Select Map 3 Select cylinder 1 of map 1 Select cylinder 2 of map 1 Select cylinder 1 of map 2 Select cylinder 2 of map 2 Center graph on selection Display all Change over to Standard mode Change over to Advanced mode Activate menu Action Shifting between cells Cell selection Scroll the table by one page up Scroll the table by one page down Increase the values of the selected cells by one percentage point Decrease the values of the selected cells by one percentage point 56 APPENDIX 2 GLOSSARY xls File format for Microsoft Excel Acronym for Electronic Control Unit FAST Fuel Ignition Adjustment System Tecnology Map File File residing in the control unit containing information on the motorcycle calibration and the three maps that can be selected by the option switch Firmware set of instructions and programs residing in the memory of the FAST control unit that allow
29. GPSTYLE slip on without dB killer f GPPRO GPSTYLE slip on with dB killer fsk Suzuki GSX A 1000 2003 2011 Suzuki GSX A 1000 2009 2011 Suzuki GSX A 1000 2003 2011 Suzuki GSX A 1000 2003 2011 Suzuki GSX A 1000 2003 2011 Suzuki GSX A 1000 2009 2011 Suzuki GSX R 1000 2009 2011 Suzuki GS A 1000 2009 2011 Suzuki GSX R 1000 2009 2011 Suzuki GSX A 1000 2009 2011 Honda CBR 500 RR 2003 2011 Honda CBR 500 RR 2003 2011 Honda CBR 500 RR 2003 2011 Honda CBR 500 RR 2003 2011 Handa ANN RR 2 4 2011 hk ERE ERE DC gt FACTORY FACTORY ful system with dB Killer fsk FACTORY FACTORY full system without dB Killer FACTORY FACTORY single slip on with dB Killer fsk FACTORY FACTORY single slip on without dB Killer fsk kat eliminator fsk OVAL GPSTYLE GPPRO slip ons with dB Killer with kat eliminator fsk OVAL GPSTYLE GPPRO slip ons with dB Killer fsk OVAL GPSTYLE GPPRO slip ons without dB Killer with kat eliminator fsk OVAL GPSTYLE GPPRO slip ons without dB Killer Fsk Factory Factory A Corsa full system without dB Killer fsk Corsa full system with dB killer fsk Corsa full system without dB killer Factory full system with dB killer fsk Factory full system without dB killer fsk FACTORY slin nn with AR killer Select a file to display previ 34 Position
30. S70 5 80 TPS90 TPS 100 1 2 500 0 0 0 0 0 0 0 0 0 0 0 3 1 000 0 0 0 0 0 0 0 0 0 0 0 4 1 500 0 0 0 0 0 0 0 0 0 0 0 5 2 000 0 0 0 0 0 0 0 0 0 0 0 6 2 500 0 0 0 0 0 0 0 0 0 0 0 7 3 000 0 0 0 0 0 0 0 0 0 0 0 8 3 500 0 0 0 0 0 0 0 0 0 0 0 E 3 750 0 0 0 0 0 0 0 0 0 0 0 10 4 000 0 0 0 0 0 0 0 0 0 0 0 4 250 0 of al 0 0 0 0 0 0 0 0 i2 4 500 0 0 0 0 0 0 0 0 0 0 1 13 4 750 0 0 0 0 0 0 0 0 0 0 2 14 5 000 0 0 0 0 0 0 0 0 0 1 3 15 5 250 0 0 0 0 0 4 21 4 1 2 4 16 5 500 0 0 0 0 1 2 3 3 4 1 5 17 5 750 0 0 0 0 2 4 7 6 2 3 5 18 6 000 0 0 0 0 3 6 7 4 EI 2 5 19 6 250 0 0 0 0 3 6 9 7 1 2 5 20 6 500 0 0 0 0 3 6 9 9 E 4 5 21 6 750 0 0 0 0 0 1 2 6 3 5 5 22 7 000 0 0 0 0 0 0 1 2 ET 4 5 23 7 250 0 0 0 0 1 3 3 0 1 3 5 24 7 500 0 0 0 0 2 5 7 3 6 2 5 25 7 750 0 0 0 0 3 7 10 6 7 3 10 26 8 000 0 0 0 2 4 8 13 6 5 2 10 27 8 250 0 0 0 0 3 6 8 2 3 2 10 28 8 500 0 0 0 0 1 3 5 0 0 21 5 23 8 750 0 0 0 0 0 2 2 5 7 33 5 30 9 000 0 0 0 0 2 4 3 14 37 24 0 31 9 250 0 0 0 2 5 10 6 24 24 20 0 32 9 500 0 0 1 3 6 12 6 20 20 22 5 33 9 750 0 0 21 3 6 13 16 22 15 19 5 34 10 000 0 0 0 2 4 9 20 20 13 26 5 35 10 250 0 0 0 2 4 8 14 20 18 28 5 36 10 500 0 0 0 0 T 4 37 20 13 38 5 37 10 750 0 0 0 0 0 E 16 27 16 26 5 38 11 000 0 0 0 0 0 0 24 24 16 26 5 M Once the map has been copied into Excel you can make the desired changes
31. al stresses Specialized laboratories have carried out all testing of the product thus ensuring its reliability After passing the bench tests the definitive prototypes were sent to proven and trusted testers to carry out a series of field tests And so after some final fine tuning the stage has been reached where the product is ready for the market This product the first and only one of its kind has obtained approval according to the R10 European regulations By passing the required series of electrical and electromagnetic tests the absolute reliability of the control unit has been con firmed The RTO approved control unit guarantees no interference with other electronic items fitted onto the motorcycle or in the surrounding environment Welcome to the FAST era 2 WARNINGS This manual has been prepared by SITO GRUPPO INDUSTRIALE S p A for use by qualitied personnel This manual does not provide complete instructions In order to correctly implement installation and processing operations with FAST Il con trol boxes you must have all the necessary skill and know how for operation on motorbikes This is a basic pre requisite without this and respect for all the details contained in the manual any attempts to use FAST products on the bike would be rendered inappropriate and or dangerous for use The information of particular importance in this manual are identified by the following symbols DANGER indicates a hazardous sit
32. damage This may not be determinable in advance as it is based on different variables including different types of motorcycles This may also cause the vehicle to stall or otherwise malfunction This may cause serious injury or death The spark advance table consists of values in degrees that represent the change you want to apply in relation to RPM and the percentage opening of the throttle valve TPS The map displays the change in degrees that needs to be applied to the spark advance of the motorcycle compared to the map in the original control unit of the vehicle A positive value corresponds to an increase in spark advance degrees while a negative value corresponds to a reduction in spark advance retarding the timing The table represents one by one all the maps in the memory of the control unit depending on which one is selected in the side menu under MAP SELECTOR see chapter 10 MAP SELECTION SETTINGS AND NOTES and in the selector under the table itself It is possible to add a row by selecting the point where you wish to add a row and rightclicking on the table area to make the drop down edit menu appear In that menu you must select the item TABLE and then INSERT ROW At this point a new row will appear with an RPM value between that of the row selected and that of the previous row with interpolat ed values in it 2 8 4 0 _3 _9 Copy Paste 3 5 3 3 5 5 Faste Rpm E E Select All Formula T 3
33. em without dB Killer Suzuki GSX A 1000 2003 2011 Suzuki GSX A 1000 2009 2011 Suzuki GSX A 1000 2003 2011 Suzuki GS A 1000 2009 2011 Suzuki GSX R 1000 2003 2011 Suzuki GS A 1000 2009 2011 Suzuki GS R 1000 2009 2011 FACTORY FACTORY R single slip on with dB Killer fsk FACTORY FACTORY single slip on without dB Killer kat eliminator fsk OVAL GPSTYLE GPPRO slip ons with dB Killer with kat eliminator fsk OVAL GPSTYLE GPPRO slip ons with dB Killer fsk OVAL GPSTYLE GPPRO slip ons without dB Killer with kat eliminator fsk OVAL GPSTYLE GPPRO slip ons without dB Killer fsk Suzuki GSX F 1000 2009 2011 Factory Factory Corsa full system without dB Killer fsk Honda CBR 600 RR 2003 2011 Honda CBR 600 RR 2003 2011 Honda CBR 600 RR 2003 2011 Honda CBR 500 RR 2003 2011 Handa ANN RR 2 4 2 11 Corsa full system with dB killer fsk Corsa full system without dB killer Factory full system with dB killer fsk Factory full system without dB killer fsk FACTORY NYVAL 1 slin nn with AR killer Position 2 Injection ignition Position 3 Injection ignition Notes Cylinders Cylinders Protection Version Select a file to display previ 36 14 ADDITIONAL INFORMATION 14 1 STANDARD MODE AND ADVANCED MODE Standard mode is the default working mode When you are in Standard mode you use one map for all of the cylinde
34. emo as 21 ON LINE HELP You can access the electronic version of this manual by selecting the Help item in the drop down menu as shown in the GB following image da v Information about FAST II EE EE x pele 334 News Shi Send Export Send Send RealTime Auto tracking One Two Three z Configuration Modification Modification Update Maps and Firmware m Update Fast Il ELECTRONIC SYSTEMS Map Selector Map Switch 1 v 2000 4000 6000 7000 5000 9000 10000 11000 12000 13000 14000 15000 tev limiter function Protection Mapping not protected LeoVince FAST II Injection for Kawasaki ZX 10R Ninja _ Nessun news dal mondo Fast disponibile 201 1 Protect LeoVince FAST II Injection FAST Shift dyno mapping of Kawasaki ZX 10R Ninja 2011 with LeoVince SBK Factory R E approved EVO II slip on The LeoVince SBK Factory R E approved EVO II Slip on for Triumph Speed Triple 1050 2011 the sound of LeoVince Factory R exhaust LeoVince gives voice to Super T n r of Davide Biga during his tour around the world come on Davide Davide uses the Factory E approved EVO II Slip On LeoVince SBK LV One Approved EVO II for Suzuki GSR 750 2011 Silencing body and collector tube in stainless steel AISI 304 LeoVince X3 Silencer 2 Strokes for KTM 300 EXC 2011 General shortcuts Shortcut Ins CTRL E CTRL F ALT F4 CTRL C CTRL V CTRL R CTRL Y CTRL T CTRL P F3 FA CTRL
35. ems on the menu bar you can access the various control bars In this chapter the various control bars in the software will be illus trated and all the various icons they consist of will be explained The main control bar is the FAST bar where the most important functions of the software can be found e g Read FAST Write FAST etc and the function of each icon in it will be explained below properties FAST Shift Send Export Send Send RealTime amp ute tracking Two Three Configuration Modification Modification This allows you to load a map file from the Hard Disk of the PC This allows you to save a map file to the Hard Disk of the PC This allows you to read a map file from the FAST control unit This allows you to load a map file into the FAST control unit This allows you to access the properties window of the map file where it is possible to check certain infor mation relating to the file such as the PRODUCT CODE the map version the Firmware version etc See chap ter 14 ADDITIONAL INFORMATION To access the screen for managing the electronic gear shift This allows you to write the map and the firmware onto a control unit with a single operation It can be used to reconfigure a control unit for use on a different motorcycle from the one it was on before For further infor mation refer to paragraph 14 3 CONTROL UNIT RECONFIGURATION 16 worksheet This allows you to export
36. ews when the FAST II software is started 45 16 REAL TIME Modification of the maps used by the control unit without the nec essary knowledge or if performed by unqualified personnel may AWA 2 N N G result in the misuse of maps and damage to the vehicle This may cause the vehicle to stall or otherwise malfunction This may also cause serious injury or death By connecting the computer to the control unit when the motorcycle engine is running you enter Real Time mode Using Real Time mode it is possible to work on maps in real time and apply the injection and spark advance changes instantly When the vehicle is started the software will read and automatically display the maps in the FAST Il control unit on the interface that is to say the initial maps to which changes are about to be made The bar on the right side of the screen will change appearance and in it a new panel will appear displaying the most important parameters of the functioning of the engine such as RPM TPS the Duty Cycle of the injectors the value of the percentage injection variation and the degrees of spark advance that the control unit is applying Ns Eug properties FAST Shift Send Export Send Send Real Time Configuration Modification Modification RPM TPS 4 1000 2000 3000 4000 5000 6000 7000 8000 9000 40000 11000 12000 13000 14000 15000 16000 Duty Cycle C ix TPS 0 TPS 2 TPS 5 5 144 TPS 30 TPS 4
37. ferent types of motorcy cles This may also cause the vehicle to stall or otherwise malfunc tion This may cause serious injury or death The graph area allows you to view the curves of the changes made to the gasoline injection or spark advance depend ing on the TPS It is also possible to work on the map through the graph area similarly to the way you can with the MAP TABLE AA Injector 1 I 2000 Bn rg aag ann 10000 11000 12000 13000 Iniector 1 Ignition To view the desired graph you simply select one or more cells in the map table and the sottware will display the curve or curves of the changes made according to the TPS columns the selected cells belong to Or you can use the column selec tor on the control bar under the VIEW item For further information refer to chapter 7 CONTROL BARS So if you select any cell in the 25 TPS column the curve relating to that column will be displayed and if you also add to the selection another cell belonging to the 50 TPS column the curve relating to this second column will also be added to the previous curve in the graph area 22 The graphs of the various curves always have the RPM values as the x axis and the percentage change value applied to the injection or the value in degrees of the change made to the spark advance as the y axis depending on which map is currently displayed 8000 10000 11000 12000 13000 P TPS O24 TPS 24 TPS 54 TPS 104 TPS 202 TPS 40 TPS
38. h those conditions that are normal or reasonably foreseeable during use of the motorcycle and the deployment of a LeoVince exhaust system For use outside of the fore going SITO GRUPPO INDUSTRIALE S p A disclaims any liability for damages that may be caused to persons or proper ty All our maps are created using a standard motorcycle in pertect condition as a reference however there can be produc tion differences between the same motorcycles or updates or changes by the manufacturer which are not known by SITO GRUPPO INDUSTRIALE S p A In order to avoid problems that can affect the safe and proper use of our products please do all the inspections required such as but not limited to any irregularities in power running various defects etc FAST is intended for racing or other off road uses only FAST is not legal for sale or use in California on pollution con trolled vehicles OUR FAST UNIT ACTS DIRECTLY ON THE PARAMETERS THAT CONTROL THE ENGINE SO ITS USE IS RESERVED FOR QUALIFIED PERSONNEL WITH EXPERIENCE IN THE SPECIFIC FIELD OF MOTORCYCLES Before using the FAST Il software please read the Software User Manual and Assembly Instructions Manual on the DVD in the package Failure to follow the instructions and warnings in this manual can cause damage to the engine Engine damage with the motorcycle in motion can cause serious physical injury including death to the driver In the preparation of customized maps or modification of the
39. ing figure The title bar of the table shows which table is currently being displayed In advanced mode the selector switch can be used to select the injection maps of each cylinder as well as the spark advance map For further information refer to paragraph 13 1 STANDARD AND ADVANCED MODES im lt y When creating and editing maps advised that extreme values in the air fuel ratio can cause engine damage This may not be deter minable in advance as it is based on different variables including different types of motorcycles This may also cause the vehicle to stall or otherwise malfunction This may cause serious injury or death The injection tables consist of percentage values that represent the change to the amount of gasoline injected in relation to RPM and the percentage opening of the throttle valve TPS The various maps show the percentage change to be applied with a positive sign to increase the quantity of gasoline injected and thereby enrich the air gasoline mix and a negative sign to reduce the quantity of gasoline injected and thereby lean out the air gasoline mix as compared to the quantity set by the original control unit When creating and editing maps be advised that extreme values in degrees of ignition advance can cause engine
40. ir product in compliance and according to the conditions of the Executive Order of the Italian Republic 6 9 2005 n 206 clauses from 114 to 127 excluding any other responsibility SITO GRUPPO INDUSTRIALE S p A shall decline any responsibility should lack of maintenance cause damage or jeop ardize normal functioning of the product sold The Purchaser is aware that lack of or incorrect maintenance of the parts use in a manner that does not conform with the instructions contained in the technical manuals and or handbooks supplied and the non observance of warnings con tained herein and in the installation handbooks and or technical handbook supplied with the product exposes the per son personal belongings and any third parties to the risk of suffering a damage that shall not be refundable as per arti cle 122 of the Civil Code 58 3 5 Warnings SITO GRUPPO INDUSTRIALE S p A products have been designed and manufactured in observance of normal use con ditions or conditions rationally foreseen For other uses that differ from previous indications SITO GRUPPO INDUSTRI ALE S p A shall not be held liable for any damages that could occur to goods or persons It is also pointed out that our products have been constructed using as reference a standard motorcycle in perfect condi tion however there could be some manufacturing differences between the same motorcycle examples or updates or changes made by the manufacturer of which SITO GRUPPO
41. ired direction The mouse pointer will change appearance and take the form of a double arrow By moving the graph upwards the quantity of gasoline injected into the engine is increased enrichment of the air gasoline mix if the map currently being viewed is an injection map or the spark advance is increased if the map currently being viewed is a spark advance map whereas by moving the graph downwards the quantity of gasoline injected into the engine is decreased leaning out the air gasoline mix for injection maps or the tim ing of the spark is delayed in the case of a spark advance map 2000 6000 2000 9000 10000 11000 12000 12000 1000 2000 3000 4000 5000 Bun 000 Injector 1 3 3 Injector 3 Injector 4 ff Ignition 5 10 MAP SELECTION SETTINGS NOTES AND EXPLORE MAPS By using the right side of the main screen you can select the map to be viewed in the table and therefore in the graph area In this area you can also select the rev limiter and map protection as well as edit the notes field By means of the selector at the bottom of the side bar you can access the EXPLORE MAPS function ELECTRONIC SYSTEMS Maps Selector Switch Maps 1 Protection Mapping not protected Protect ART 9402 HONDA CBR 1000 RR 2008 2009 kappal slip on GPSTYLE GRPRO con dB killer 7950 9114 2 slip on OVALE FACTORY con dB killer 7348 7343 7351 7352 Mappas gruppo omologato con dB ki
42. l be saved in the Firmware Folder set in the options window see chapter 15 CONFIGURATION while for the maps a LeoVince folder will be created inside the folder set as Maps Folder in the options window see chapter 15 CONFIGURATION Information about FAST 1 Guide Mews Update Maps and Firmware Ltd By clicking on Update FAST II if there is an active internet connection the procedure for updating the FAST Il software is activated The software connects to the internet and if there is an update it will automatically see to downloading the data and installing it During installation the software will close automatically and then restart when the installation has been com pleted 5 20 INFORMATION ON THE SOFTWARE QU ov can access the software information screen by using the item Information on FAST II that is in the drop down menu as shown in the following picture eee natio abo ECAC cm on see t4 9 News AST Shi Export Send Send RealTime Auto tracking Two Three Configuration Modificati Modificati Update Maps and Firmware Update Fast 1 ELECTRONIC SYSTEMS Map Selector Map Switch 1 v 2000 4000 6000 sooo 9000 10000 11000 12000 13000 ev limiter function Protection Mapping not protected LeoVince FAST II Injection for Kawasaki ZX 10R Ninja Nessun news dal mondo Fast disponibile 2
43. ll Graph Table On the left side of the FORMULA function window it is possible to choose the mathematical operation to be carried out on the currently selected cell The possible choices are addition subtraction multiplication and division On the right side of the window is the field containing the factor to be used in the selected operation When the APPLY button is pressed the chosen operation is carried out using the factor set For example in the above figure the operation of addition has been selected and a factor of 2 has been set and so by clicking on the APPLY button 2 will be added to the previous value of all the cells selected It is also possible to copy the map onto a Microsoft Excel worksheet or compatible programs and vice versa The quick est way to use this functionality is to select the item COPY TABLE from the drop down edit menu Paste 5 10 3 2 2 6 2 0 5 4 Paste Rom Select All 2 8 4 Formula Graph Oo L E ho 4 12 Insert line Delete lines 3 2 0 Then open a new Microsoft Excel worksheet and use the paste function El 5 c o F M P M n t mn TPSO TPS296 5 5 TPS10 TPS20 TPS40 TPS6096 TP
44. ller 7955 7956 36 10 1 MAP SELECTION The map selector allows you by means of a drop down menu to select from among the three available maps which one you want to view in the injection table and the graph Selector Switch 2 Switch 2 10 2 REV LIMITER SELECTION Modifying and increasing the rev limiter can cause damage to the engine and as a result serious injury or death Through the special check box you can choose whether to activate the strategy of increasing the maximum engine revs limit runaway speed which has already been preset by Leo Vince check box ticked Or you can choose to de activate the strategy and therefore keep to the maximum rev limit imposed by the manufacturer of the motorcycle check box empty orev limiter function 10 3 PRIVATE MAP SELECTION by clicking on the wording Protect the PRIVATE MAP function is enabled which allows you to prevent the maps on the control unit from being read by other users of the FAST INJECTION Software if they do not have the correct password Protection Mapping nat protected Protect When this function is enabled the user will be asked to insert an 8 character alphanumeric password and to confirm it Protect with Password 5 Password ta 8 characters Re enter Password LA When you click on the OK button the map will be identitied as private Protection Remove To remove
45. llows you to center and zoom the graph onto the currently selected cells This allows the entire graph to be displayed as a function of the columns selected making use of the whole area reserved to the graph This allows you to select the column s to be displayed in the graph This puts the FAST software layout onto the detault layout See paragraph 15 2 LAYOUT This sets the FAST software layout so as to give priority to the table rather than the graph See paragraph 15 2 LAYOUT 19 This sets the FAST software layout so as to give priority to the graph rather than the table See paragraph 15 2 LAYOUT n cave This allows you to save the current FAST software layout or to retrieve a previously saved layout See pen graph 15 2 LAYOUT Below is the TOOLS command where the icons concerning various functions of the FAST Software can be found e g Compare maps Options etc and the operation of each icon in it will be explained below Sl p Compare Create TPS Options calibration This allows you to access the function for comparing two maps See chapter 11 GRAPH COMPARISON This allows you to access the function for constructing a map See chapter 13 MAP CONSTRUCTION This allows you to access the function for calibrating the minimum value and the maximum value of the throt tle position sensor TPS See chapter 12 TPS CALIBRATION This allows you to access the
46. m the START menu will be cre ated as well as a desktop link To open the interface click twice on the desktop link or open the program from the Windows start menu 5 COMMUNICATION PORT SETTING The FAST II Software is able to recognize automatically the communication port assigned to the FAST Il control unit by the operating system Alternatively to configure the communications parameters you can click on the OPTIONS icon Options iz Communication information Language Port USB English United Kingdom Baud Hate E E 0 7 Timeout Write Timeout ms 100 Retry Timeout m E IL Mapping Directory C Documents and Settings flaviob D ocumentisM appe Firmware directory CAPrograrnmisSitaGreupAFAST Il Debug V2 5 Firmmware Formula Factor preset 1 00 al wt Decimal precision i Automated Heal Time Start Cancel _ From this window it is possible to set the communication port by keying the correct port into the COMMUNICATION INFORMATION box To confirm the choice simply click OK 6 MAIN SCREEN As can be seen in the following figure the main screen is divided into the areas shown below Map Selector Map Switch 1 2000 3000 4000 5000 6000 7000 8000 9000 10000 41000 42000 43000 14000 15000 limiter function TPS 0 TPS 0 TPS 0 TPS 0 TPS 0 TPS 0 TPS 0 TPS 0 TPS 0 TPS 0 TPS 0 0 0 0 0
47. nts of any type parts used on motorcycles used in hiring services parts subject to wear under normal operating conditions for example rubber supports aluminium body defects caused by oxidation or due to atmospheric agents improper or misuse of the part or the motorcycle by the owner and or operator unauthorized modifications or modifications carried out by persons who do not represent SITO GRUPPO INDUSTRIALE S p A g parts used in an incorrect manner or for which normal maintenance has not been observed ae OD 3 3 LIMITATIONS The general terms of the warranty shall be annulled in the following cases a The parts have defects deriving from accidents neglect or overloading b Use of the motorcycles where the items are mounted in a non conforming manner c Maintenance of the motorcycles where these parts are mounted has not been carried out following the methods indi cated in the use and maintenance handbook d Parts excluded as indicated in section 2 0 of this warranty e Parts excluded due to negligence of the owner in following the obligations specified in section 1 of this warranty f If the parts are not used in conformity with the technical specifications for use on the vehicles where they are mount ed as supplied by the manufacturers of the said vehicles 3 4 RESPONSIBILITY FOR DAMAGE FROM DEFECTIVE PRODUCTS SITO GRUPPO INDUSTRIALE S p A shall be responsible for damages caused by defects in the
48. other settings such as the language or the path of the mapping file By clicking the Enable Windows Anchoring field it is possible to personalize the arrangement of the various items of the main screen To make the changes made to this setting effective it is necessary to close and restart the application When the anchoring function is enabled the various windows can be moved at will by simply using the functions on the title bar of each window or by moving the various windows around the screen until they are in the desired position To move a window you need to left click on the title bar of the desired window and while keeping the mouse button pressed down drag the window over to the desired point and then release the left mouse button To reset the anchoring of the application to its initial state you must disable the anchoring window by removing the tick from the Enable Windows Anchorage field and then click the Reset Anchoring button It is then necessary to close the application to activate the change The next time the application is started the arrangement of the windows on the main screen will have returned to their default state Notes character allows you to select the type style and size of the characters used for displaying the notes field Cells character allows you to select the type style and size of characters used for displaying values in the injection table 43 15 3 SHORT CUT By using the short cut wind
49. ow you can set the combination of keys for all the shortcuts in the software Options Advanced Shortcut Heal Tine Modification amp uta tracking T able v Paste Paste Hpm lt True Selection All Ae Formula Standard Advanced Open CtF12 Save ShiftF12 amp properties hu T In the selection table the first column contains the name of the function for which a shortcut is required and in the sec ond column there is a drop down menu that allows you to assign the desired key combination to that shortcut pu 15 4 ADVANCED By using the advanced options window you can set the preferences relating to news and automatic updating of the soft ware Options x Auto Check For Updates every days Open News when App starts Use Proxy this field must be ticked if a proxy is being used for the internet connection If it is the Server Port User and Password fields also need to be completed to allow the FAST Il software to be correctly connected to the internet Auto Check For Update allows you to enable automatic updating of the FAST software IF it is activated it is pos sible to select every how many days the software will check for the presence of any updates Open News When App start determines whether you want to see the N
50. peration in REAL TIME mode completely open ing the throttle valve i e turning the throttle grip completely corresponds to the 100 value of the THROTTLE OPEN ING indicator Should the two things not correspond it is appropriate to carry out a TPS CALIBRATION using the icon for this on the con trol bar see chapter 7 CONTROL BARS You must therefore connect the Personal Computer to the FAST control unit and activate the TPS CALIBRATION by clicking on the TPS CALIBRATION icon and start the engine IPS calibration 6 Readed Value Volt 0 00 __ Map Value Minimum Value 0 42 0 42 5 Maximum Value 4 42 2 4 42 In the calibration window you can see the TPS value that is currently being read and the minimum and maximum values currently used by the control unit Open the throttle valve completely by making a complete turn of the throttle grip and release it immediately Should the acquired value not be satisfactory repeat the throttle opening procedure The values acquired automatically by the software can be edited by switching off the engine and keying the desired values into the relevant fields At this point simply click on the icon showing the FAST control unit to send the new TPS calibration values 33 13 MAP CONSTRUCTION To be able to associate maps in the FAST control unit with the switch positions in a personalized way or to be able to insert into a map file maps of different files you
51. pter 4 INSTALLATION Mapping Folder shows the source path used by the program to save and load the mappings when Open file or Save file is selected By pressing the BROWSE button to the right of the path it is possible to select a new source fold er for the mappings Firmware folder shows the source path used by the program for firmwares when Update Firmware is selected see chapter 15 UPDATING FIRMWARE By pressing the BROWSE button to the right of the path it is possible to select a new source folder for firmwares We recommend you not to change the default setting Default Formula factor shows the value of the factor in the formula window when that is opened Cell decimal places allows you to select the definition with which you wish to see the values in the injection tables LE 15 2 LAYOUT Through the layout window you can set a number of preferences relating to the graphics appearance of the FAST software Options E General Layout Shortcut Advanced Colors Background Foreground Cells modified Cells lacked Cells Selected Graph plotting area Change Point Markers Graph plotting area Restore preset colors e i Enable Window Anchoring Notes character Font Name Microsott Sans Serif Size 8 25 Cell character zi Font Name Franklin Gothic Medium Size 14 Restore anchoring
52. r 14 ADDITIONAL INFORMATION the boxes available to the user increase becoming as many as four for injection Each of the boxes relating to injection in each switch position corre spond to the maps of each individual injector New Mapping Yamaha YZF 2008 2009 Corsa full system with dB Killer fsk Yamaha YZF 2008 2009 Corsa full system without dB Killer fsk Yamaha YZF 2008 2009 Factory Factory full system with dB Killer fsk Yamaha YZF 2008 2009 Factory Factory full sustem without dB Killer fsk Yamaha YZF 2008 2003 FACTORY OVAL GPSTYLE slip on with dB Killer fsk Yamaha YZF 2008 2003 FACTORY OVAL GPSTYLE GPPRO slip on without dB Killer fsk Yamaha YZF 2008 2009 GPPRO slip on with dB Killer Fsk Honda CBR 1000 RR 2008 2009 Factory Factory Corsa full system with dB killer fsk is il co ce Position 1 Cylinders LN Ignition me Honda CBR 1000 RR 2008 2009 Honda CBR 1000 RR 2008 2008 Honda CBR 1000 RR 2008 2009 Honda CBR 1000 RR 2008 2008 Factory Factory R Corsa full system without dB killer fsk FACTORY FACTORY O AL slip on with dB killer fsk FACTORY FACTORY A OVAL GPPRO GPSTYLE slip on without dB killer f GPPRO GPSTYLE slip on with dB killer fsk Suzuki GSX R 1000 2009 2011 FACTORY FACTORY full system with dB Killer fsk Suzuki GSX R 1000 2009 2011 FACTORY FACTORY full syst
53. rs It is possible to differentiate the maps between the various cylinders to do this it is necessary to use the FAST Il software in Advanced mode You can select the mode in which you wish to work in the FAST Il software from the VIEW menu of the control bar with the STANDARD icon or the ADVANCED icon see Chapter 8 CONTROL BARS True Selection Es N 3 a fo FER td e Preset 253 Tables Once advanced mode has been selected as well as selecting maps according to the switch you can also select them according to the cylinder In the selector of the maps to be viewed for the graph and table a set of tabs will appear for selecting the injection map for each cylinder The spark advance maps are always common to all the cylinders 4 1000 2000 3000 4000 5000 000 7000 In this way you actually have access to four maps that can be edited by the user two maps for cylinder one and two maps for cylinder two 37 14 2 CELLS IN CLOSED LOOP If you wish to change the map of a motorcycle fitted with a non excludable lambda sensor you are not allowed to change the value of the cells that come within the closed loop area of the functioning of the engine This limitation is necessary to avoid a carburation change by the FAST control unit being interpreted with the help of the lambda sensor as a fault by the original control unit The cells that cannot be changed by the user are easily distingui
54. shable as they have a different color from the other cells RPM TPS 09 Nite 5 3096 2 qPS503 TPS 609 amp TPS 8086 7 000 2 500 3 000 3 500 4 000 4 500 5 000 5 500 6 000 6 500 7 000 7 500 o gt o 10 14 3 CONTROL UNIT CONFIGURATION It is possible to configure a neutral control unit or reconfigure a control unit already configured for another motorcycle by using the SEND CONFIGURATION function which can be accessed via the icon for this in the FAST menu of the control bar see Chapter 8 CONTROL BARS By clicking on the icon a dialogue window appears that allows you to select the configuration file with which you wish to reconfigure the FAST control unit Once the file has been selected the FAST Il software will see to updating the FAST control unit with the new configura tion On the website you can find all the configuration files of the motorcycles for which the FAST Injection kit is available Cerca v 2 E i 4 El 3401 Yamaha R6 2008 2009 3416 Yamaha Fazer F21 200 u 5 9402 Honda CBR 1000 RR 2008 2009 Fskfull 3417 Yamaha FZ8 2010 Fskfu D acumenti 8 Eon Suzuki GSX R 1000 2009 2010 FskFull 9419 Yamaha 500 201 recent 89 fl 9404 HONDA CBR 600 RR 2009 FskFull 9405 Suzuki asx R 600 2008 2009 Fskrull es 9406 KAWASAKI Zx10 R NINJA 2005
55. sonnel may result in the misuse of maps and damage to the vehicle This may cause the vehicle to stall or other wise maltunction and may cause serious injury or death To avoid damaging the FAST control unit make sure the engine is switched off before proceeding with updating the firmware While downloading the firmware DO NOT start the engine DO NOT exit the application AND DO NOT disconnect the wiring or the control unit in order to avoid damage to the FAST control unit Improper settings of the parameters of the FAST SHIFT feature can cause damage to the transmission gearbox or clutch of the vehicle 5 3 SYSTEM REQUIREMENTS 3 1 MINIMIMUM REQUIREMENTS Processor Pentium gt 1 GHz Memory 512 Mb Operating System Windows XP Service Pack 2 Graphics resolution 1024 x 768 USB port 1 1 3 2 RECOMMENDED REQUIREMENTS Processor Pentium gt 1 GHz Memory 1 Operating System Windows XP Service Pack 2 Windows Vista Windows Seven Graphics resolution 1280 x 1024 at 32 bit USB port 2 0 4 INSTALLATION To install the Fast Il interface it is recommended that you close any other computer applications Insert the FAST II installa tion DVD included in the kit wait for the Windows AutoPlay to run or start the installation by double clicking on the SETUP icon on the DVD and then follow the guided procedure A message will tell you when installation has been completed A default link accessible fro
56. th out the necessary knowledge or if performed by unqualified per sonnel can cause the vehicle to stall or otherwise malfunction This may cause serious injury or death to the driver of the vehicle on which the unit is installed The most important part of the FAST interface is the map table which appears at the center of the screen when the pro gram is opened Injector 1 RPM TPS 0 TPS 04 TPS 0 TPS 0 TPS 0 TPS 0 TPS 04 TPS 0 TPS 0 TPS 0 TPS 0 o o o o S Q O CE oe X CK 42 CS WX WX IG Ng X GA x XIII X 62 62 209 XX 9 Cee 4 EIN XA MIX MM o XA X XX WX M XX It is used for both the injection table and the spark advance table You can choose which table to display by means of the selector at the bottom left corner of the table as illustrated in the follow
57. the protection you need to click on the wording Remove protection and key the correct password into the window that has just appeared When an attempt is made to read from the hard disk or the control unit a mapping file that has been made private the user will be asked to insert the correct password so that it can be read Protect with Password PIE Password up 8 characters Cem Only insertion of the correct password will allow the operation to be successfully concluded 10 4 NOTES This allows you add view and edit notes that are on the map relating to the motorcycle exhaust system the type of maps and their position etc It is appropriate to note down information about the maps and the changes made to them so as to be able to find the desired map easily in future You can write more than 300 characters in the notes Mates ART 3414 HONDA CBR 1000 RR 2010 2011 1 FACTORY FACTORY OVAL GPPRO GPSTTLE slip on with dB killer 948 7945 7950 8114 7951 7952 8444 8445 Factory Factory Full sustem with dB killer 7355 7956 8473 8474 Maps Corsa Full system with dB killer 8261 8475 10 5 EXPLORE MAPS This allows you to explore your own map database and inside the map file in a similar way to Windows Explorer If you select a map file it is possible to explore its contents the file itself is seen as a folder in which there are three other fold
58. to it and then select the area you want to copy back onto the FAST Interface Software map P3 Boe Cartel1 Microsoft Excel Px D Home Inserisci Layout di pagina Formule Dati Revisione Visualizza x amp Calibri 11 IA it E e E EA a Inserisci d m Pale MM z 3 Elimina Incolla lake ell mE m 0 00 Formattazione Formatta Stili 2 Ordina Trovae M y e i unb even 3 ow m condizionale come tabella cella Formato e filtra seleziona Appunti Allineamento Numeri EHI Stili Celle Modifica B14 Y Emm amb i m Ld c cm E Q R S E 1 t mn TPS0 TPS2 TPS596 5 10 5 20 TPS40 TPS60 TPS70 TPS8096 TPS9096 TPS 100 2 500 0 0 0 0 0 0 0 0 0 0 0 3 1 000 0 0 0 0 0 0 0 0 0 0 0 4 1 500 0 0 0 0 0 0 0 0 0 0 0 5 2 000 0 0 0 0 0 0 0 0 0 0 0 6 2 500 0 0 0 0 0 0 0 0 0 0 0 7 3 000 0 0 0 0 0 0 0 0 0 0 0 8 3 500 0 0 0 0 0 0 0 0 0 0 0 9 3 750 0 0 0 0 0 0 0 0 0 0 0 10 4 000 0 0 0 0 0 0 0 0 0 0 0 11 4 250 0 0 0 0 0 0 0 0 0 0 0 12 4 500 0 0 0 0 0 0 0 0 0 0 1 13 4 750 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 or 19 6 250 0 0 0 0 3 6 8 7 1 2 5 20 6 500 0 0 0 0 3 6 8 8 1 4 5 21 6 750 0 0 0 0 0 1 2 6 3 5 5 22 7 000 0 0 0 0 0 0 2 1 4 5 23
59. uation which if not avoid A ed will result in death or serious injury DAN e E R Obey all safety messages that follow this symbol to avoid injury or death WARNING indicates a hazardous situation which if not avoided could result in death or serious injury Obey all safety messages that follow this symbol to avoid possible injury or death CAUTION indicates a hazardous situation which if not avoided could result in minor or moderate injury Obey all safety messages that follow this symbol to avoid possible danger NOTICE is used to address practices not related to personal injuries SITO GRUPPO INDUSTRIALE S p A is involved in a process of constant product upgrading All the most significant alter ations or modifications will be notified to all Authorized SITO dealers and where applicable will be included in subse quent editions of this manual The drawings and specifications may be subject to alteration without prior warning SITO GRUPPO INDUSTRIALE S p A will not accept any responsibility for any damage as the result of tampering or mis handling of the FAST control system The FAST Il control system has been designed and developed for motorbike competitions USE ON PUBLIC ROADS OR MOTORWAYS IS NOT PERMITTED The maps for the Engine Control Unit ECU supplied with the units and on the website www Leovince com were made by technicians of SITO GRUPPO INDUSTRIALE S p A in accordance wit
60. uki GSX R 1000 2009 2011 FACTORY FACTORY full system with dB Killer fsk E 9403 Suzuki GSX R 1000 2009 2011 FACTORY FACTORY full system without dB Killer fsk gt 9403 Suzuki GSX R 1000 2009 2011 FACTORY FACTORY R single slip on with dB Killer fsk ART 940 9403 Suzuki GSX R 1 2nns 2n11 FACTORY FACTORY R sinnle slin an withnut AR Killer SANE T oce 2008 2008 ART 3401 YAMAHA YZF R6 2008 2009 Protection Version Mapt Corsa full system with dB Killer 8103 8484 Map2 Zero map Map3 Zero map EIS EEE To associate a map with a switch position simply select map or switch position from Explore Maps on the left side of the window and drag it into one of the boxes on the right side of the window The boxes correspond to maps in each of the switch positions If you select and drag into a box an entire switch position all the boxes of the corresponding switch will automatically be filled with the selected position of the switch When both positions of the switch have been filled after completing the notes field and possibly selecting the private map option you can create the new file and download it onto the FAST control box by clicking on the SAVE MAPS icon To be able to save and send the saved map a map must be assigned to all the boxes Do not insert maps of different models of motorcycle into the boxes If you are working in advanced mode see Chapte
61. ver 50 years of business the Sito Group has carried out a series of developments that have allowed it to achieve a position of leadership in the field of after market motorcycle exhaust systems The most recent development LeoVince Electronic Systems is a brand new independent department reporting to the LeoVince Research and Development Department LeoVince Electronic Systems was set up to develop electronic engine management control units for use in combination with their 4 stroke motorcycle and scooter exhaust systems In the latest development stage of the FAST project the LeoVince technicians have applied their efforts to four cylinder injection engines and have developed an electronic control unit for use on the latest generation of street motorcycles Both the original FAST and the new FAST II control units manage injection however the FAST Il control unit includes addi tions which allow individual ignition control and is equipped with a series of pluses and accessories that we invite you to discover on our internet site www leovince com The LeoVince Electronic Systems engineers have designed and built this product completely in house closely collaborating with the technicians who develop our special exhaust systems Their combined efforts have resulted in an integrated con trol unit exhaust that is absolutely tailor made The control unit operates in conditions that can become difficult due to mechanical thermal and environment
62. w the ditferences table or the graph area can be re sized for a better visibility of either of them by simply left clicking with the mouse on the separation line between the table and the graph and while keeping ton pressed down dragging the mouse up to enlarge the space given to the table at the expense of the graph or down to enlarge the space given to the graph at the expense of the table In the same way you can enlarge or reduce the area given to Explore Maps by left clicking on the separation line between Explore Maps and the area dedicated to the table and the graph and while keeping the button pressed down dragging the mouse to the right to enlarge the space dedi cated to Explore Maps or to the left to enlarge the space dedicated to the graph and the table To exit the compare maps function and return to the main screen of the software simply click on the close button in the bottom right corner of the COMPARE GRAPHS window or click on the red cross in the top right corner as in any other Microsoft Windows application 12 TPS CALIBRATION Changing the calibration of the TPS used by the control unit with out the necessary knowledge or if performed by unqualified per sonnel may result in the misuse of maps and damage to the vehi cle This may cause the vehicle to stall or otherwise malfunction This may also cause serious injury or death For correct functioning of the maps it is appropriate to check that during o

Download Pdf Manuals

Related Search

Related Contents

User Guide  Kurz-Bedienungsanleitung - Migros  S4 Cervical Navigated Instruments SOP-AIS  ! WorkingPro 10_070610a.indd  Bulletin 56RF RFID System User Manual  

Copyright © All rights reserved. Failed to retrieve file