User Manual
Contents
1. a long distance will not be detected as a valid motion WACHIT VMD 95 starts e Ensure that the WACHIT VMD 95 is set to the AV Line input recording but the Image channel from the camera is not recorded WACHIT VMD 95 has a warranty of 12 months against defects in workmanship and materials after the original date of purchase In the event of failure the supplier will replace or repair it at its own option providing there is no evidence of customer misuse or alteration Customer is responsible for shipping costs to and from the supplier THE WACHIT VMD 95 MUST NOT BE USED FOR UNLAWFUL PURPOSES OR WHERE ITS USE IS UNLAWFUL FARCO TECHNOLOGIES LTD MAY NOT BE HELD LIABLE FOR INJURY LOSS OR DAMAGE DIRECT INDIRECT OR CONSEQUENTIAL ARISING OUT OF THE USE OR INABILITY TO USE THE WACHIT VMD 95 THIS INCLUDES BUT IS NOT LIMITED TO THE FAILURE OF THE WACHIT VMD 95 TO PERFORM AS ADVERTISED2. s producing signal levels as low as 0 5Vpp to as much as 2Vpp nominal signal level for composite video is 1Vpp WACHIT VMD 95 includes complex image processing algorithm which minimises false alarms due to slow changes in ambient light such as cloud movements and day night light change or fast changes such as flying birds Installation This installation procedure assumes that you have already installed a security camera at a suitable location and the camera is turned on Connect the WACHIT VMD 95 to the mains supply and turn it on 1 Connect the video cable from the video camera to the RCA AV input of the WACHIT VMD 95 2 Insert a blank tape that you can record on 3 Change the channel to AV input 4 Set the toggle switch to the VMD on Arm position Toggle switch down 5 The WACHIT VMD 95 will now start analysing the video signal and will start recording if a motion is detected Troubleshooting Problem Solution Motion is not detected e Ensure that the camera is on e Ensure that the WACHIT VMD 95 is turned on and a video tape is inserted e Check that the camera video lead is connected to the Video In e Ensure that the toggle switch is down e Unlike PIR motion detectors which are sensitive to small motions and prone to false alarms WACHIT VMD 95 is designed to detect walking of humans and movement of larger objects Therefore small motions such as movement by a small pet or moving a hand form
3. tex cr Wachie FAREI WA amp ACHIT VMD 95 Automatic Real Time Video Event Recorder User Manual Version 2 0 WACHIT VMD 95 is the combination of an off the shelf high quality VCR and the state of the art Video Motion Detection VMD technology developed by Farco Technologies Ltd WACHIT VMD 95 constantly monitors the signal received from a video camera connected to its AV Input to detect motion When a motion is detected WACHIT VMD 95 starts recording After 30 seconds of non motion WACHIT VMD 95 will pause If there is no motion for a further 2 5 minutes then it will stop If a motion is detected while the WACHIT VMD 95 is paused then it will resume recording WACHIT VMD 95 may be used with multi channel video switchers and quad processors When a motion is detected in any of the cameras it starts recording When none of the cameras have motion it stops recording NOTE some switchers and quads may not work correctly When a switcher is used activities happening on a camera that is not switched on will not be recorded Some movements in a quad installation may not be detected WACHIT VMD 95 integrates out video noise and therefore has excellent noise immunity This minimises the false alarm rate FAR while maximising the probability of correct detection PD WACHIT VMD 95 works well with both wired and wireless cameras WACHIT VMD 95 automatically adjusts to the video signal level It can be used with camera
Download Pdf Manuals
Related Search