Home

www. sylvaniaconsumerelectronics.com

1. Symbols Used in this Manual The following is the description for the symbols used in this manual Description refers to Fixing the Unit on Your Furniture GSD Digital TV operation Screw this unit on your furniture tightly using wood screws Analog Cable TV operation not supplied in the 2 holes at the back of the base as shown e Recommended screw dimension 5 1 x 20 mm e If neither symbol appears the operation is applicable to both rear of this unit screw holes Note e When you remove this unit make sure to unscrew the wood screws from your Wood Stand Furniture and other wood item EN EN Control Panel V VOLUME A MENU V CHANNEL A POWER POWER m p 15 CHANNEL A V m p 17 Press to select channels or move up A down F through the main menu items MENU i gt p 19 VOLUME A V m p 16 Press to adjust the volume or move right A left V hrough the main menu items Infrared sensor window Receives infrared rays transmitted from the remote control POWER ON indicator Lights up green when power is on STAND BY indicator Lights up red when power is off English Terminals Z o ZR U G Q I oO 7A Side Panel 8 HDMI 2 Input jack m p 9 10 9 S Video Composite Video Audio L R 9 Input jacks for VIDEO gt m p 11 12 gt 10 Headphone Audio Output jack s Headphone connection for personal listening Rear
2. Closed Caption Caption Service Digital Caption Service Caption Style off Select if you do not want digital caption service Select one of these before changing CS tocs 6 other item in Closed Caption menu Choose CS 1 under normal circumstances 6 Press MENU to exit Note e Digital Caption Service that you can switch differs depending on the broadcast description English Caicaptionsstyle ATSC You can change the caption style such as font color or size etc 4 Use A Y to select Caption Style then press OK Use A Y to select User Setting then press OK ClPicture Closed Caption User Setting Font Style Font0 Font Size Middle Font Color White Font Opacity Solid Background Color Black Background Opacity Solid Edge Color Black Edge Type None Use A Y to select On then press OK 7 Use A to select an item then press OK Then use A Y to select the desired setting and press OK 0 a 0 Z S lings Z Picture display So you must be Philip Hi I m pleased to meet you Edge Edge Color and Edge Type Font Font Style Font Size Font Color and Font Opacity or Transparency Background Background Color and Background Opacity or Transparency e The setting description for each item is shown on the next page e Review your setting choice made on the next page by looking in the upper right corner of
3. 4 to select the desired rating then press OK repeatedly to switch between View and Block US TV Ratings Lock prev v s t o Rating Category TV MA Mature audience only higher TV 14 Unsuitable for children under 14 TV PG Parental guidance suggested TV G General audience TV Y7 Appropriate for all children 7 and older TV Y Appropriate for all children lower Press MENU to exit To set the sub ratings As for TV MA TV 14 TV PG or TV Y7 you can further set the sub ratings to block specific elements of programming To set the sub ratings follow the step below Use A V lt P gt to select the desired rating then press OK repeatedly to switch between View and Block US TV Ratings Lock DIAN Although the default PIN code 0000 is supplied with the unit you can set your own PIN code 5 Use A Y to select Change PIN then press OK 6 Press the Number buttons to enter the new 4 digit PIN code e Enter PIN code again in Confirm PIN entry field Channel Lock ss Enter PIN Confirm PIN Mg Features PIN Code 7 Press MENU to exit Note e Make sure new PIN code and confirm PIN code must be exactly the same If they are different the space is cleared for reentering e Your PIN code will be erased and return to the default 0000 when a power failure occurs If you forget the PIN code unplug t
4. Format Resolution Refresh rate VGA 640x480 SVGA 800 x 600 XGA 1 024 x 768 60Hz 3 en 1 280 x 768 5 1 360 x 768 2 Other formats or non standard signals will not be displayed correctly Note e Please purchase the VGA cable that has a ferrite core e The following operations may reduce noise Attach a ferrite core to the AC power cord of your PC Unplug the AC power cord and use the built in battery of your PC 13 EN Plug In the AC Power Cord Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed rear of this unit AC power cord AC outlet Caution e Do not connect the AC power cord to a power supply outside the indicated voltage of this unit AC 120V Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks Note e Each time you plug in the AC power cord no operations will be performed for a few seconds This is not a malfunction __14 EN English These operations are accessible by remote control 4 Use 4 to select the desired location setting then Some may also be accessible by controls on the main unit press OK Initial Setup This section will guide you through the unit s initial setting which includes selecting a language for your on screen menu and autoprogram which automatically scans and memorizes viewable channels Retail
5. 3 gt 0 Z g b Select Before you begin Make sure the unit is connected to antenna or cable e Select Retail store the unit will be set up with predefined setting for retail displays In this setting the 1 After making all the necessary connections power consumption may possibly exceed the limited press to turn on the unit requirement of the ENERGY STAR qualification It may take a few moments to turn on the unit for the Select Home the unit is set to maximize the energy first time efficiency for home setting and it can be adjusted hrough a choice of picture and sound quality according o your preference e When the initial setup is completed the lowest e Initial Setup menu appears automatically after the unit is turned on 2 Use A Y to select the on screen language from the memorized channel with the confirmation message of choices English Espa ol Fran ais on the right side of the he location setting will be displayed on the TV screen TV screen Note 3 Use A V to select Antenna for TV channels or Cable e Ifyou are not receiving a signal from your cable service contact the Cable provider for CATV channels then press OK e Ifyou press or MENU during autoprogram this setting will be canceled e The initial autoprogram function can be executed for either Antenna or Initial Setup Cable only once When you change the connection Antenna Cable 7 5 zi set
6. 90 day limited warranty Replacement product can only be sent if all warranty requirements are met Failure to follow all requirements can result in delay WHAT IS NOT COVERED EXCLUSIONS AND LIMI TATIONS This Limited Warranty applies only to new company manufac tured products that can be identified by the trademark trade name or logo affixed to it This Limited Warranty does not apply to any hardware product or any software even if packaged or sold with the product as manufacturers suppliers or publishers may provide a separate warranty for their own products pack aged with the bundled product The company is not liable for any damage to or loss of any pro grams data or other information stored on any media contained within the product or other additional product or part not cov ered by this warranty Recovery or reinstallation of programs data or other information is not covered under this Limited Warranty This warranty does not apply a to damage caused by accident abuse misuse neglect misapplication or non supplied product b to damage caused by service performed by anyone other than company approved Authorized Service Location c to a product or a part that has been modified without written company per mission or d if any serial number has been removed or defaced or e product accessories or consumables sold AS IS without warranty of any kind by including refurbished product sold AS IS
7. Digital channels 10 ch Ey Analog channels 6 ch Cc owest memorized channel will be displayed e When the scanning and memorizing are completed the 0 3 0 Z S gt 3 Z Note e After setting Autoprogram using CH A Y on the remote control skips unavailable programs automatically e If you are not receiving a signal from your cable service contact the Cable provider e Ifyou press or MENU during autoprogram the setting will be canceled e Even if Autoprogram is completed the channel setting will be lost if the AC power cord is unplugged before turning off the unit by pressing e The PIN code will be required once you set a PIN code in the Child Lock m p 27 e Ifyou want to change your PIN code follow the instruction of Change PIN m p 28 19 EN 20 EN Channel List The channels selected here can be skipped when selecting the channels using CH A V Those channels can still be selected with the Number buttons Press MENU to display the main menu C se A Y to select Setup then press OK c se A Y to select Channel List then press OK 1 2 3 4 Use A Y to select the channel you want to remove then press OK Channel List pe Highlight channels for Ch Up Down key selection 7v BACK Back A Ch Select a Watch Skip e The channel display for the removed channel darkens You will not
8. Release Version XXXXXXX_XXX_X_XXXX 5 Press MENU to exit 0 3 0 Z S gt 1 Z 31 EN TROUBLESHOOTING Troubleshooting Guide If the unit does not perform properly when operated as instructed in this manual check the following chart and all connections once before calling for service Symptom Remedy e Make sure the AC power cord is plugged in e Make sure that the AC outlet supplies the proper voltage plug another electrical No power appliance into the AC outlet to ensure that AC outlet operates normally Ifa power failure occurs unplug the AC power cord for 1 minute to allow the unit to reset itself e Press only one button at a time Do NOT press more than one button at the same time Control button does not work e Ensure that no buttons on the remote are depressed and move freely e Check whether the connection of the antenna cable receiver or satellite box is connected correctly Check whether all the cables to the unit are connected to the correct output jack of your device like BD DVD recorder ake sure that the selected input mode is connected to the working input jack e Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode Tap any key on the keyboard to wake up your computer Power is ON but no screen image Check if the power is on Check if the right input mode is selected Check whether all the cables
9. STATE OR FEDERAL LAW Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning pulling standing or climbing on it A falling unit can cause serious injury or even death NOTE ABOUT RECYCLING This unit s packaging materials are recyclable and can be reused Please dispose of any materials in H accordance with your local recycling regulations eus Trademark Information e Batteries should never be thrown away or incinerated but disposed of in accordance with your Hom local regulations concerning chemical wastes e HDMI the HDMI Logo and High Definition Multimedia Interface TO AVOID THE HAZARDS OF ELECTRICAL are trademarks or registered trademarks of HDMI Licensing LLC SHOCK AND FIRE in the United States and other countries Do not handle the AC power cord with wet hands Do not pull on the AC power cord when disconnecting it from an Cl DOLBY HIGH DEFINITION MULTIMEDIA INTERFACE AC outlet Grasp it by the plug DIGITAL Do not put your fingers or objects into the unit LOCATION AND HANDLING e Manufactured under license from Dolby Laboratories Dolby and Do not install the unit in direct sunlight near strong magnetic the double D symbol are trademarks of Dolby Laboratories fields or in a place subject to dust or strong vibration e Avoid a place with drastic temperature changes e Install the unit in a horizontal and stable position Do not pl
10. _ y Fun Link Control aD Picture ss a MigFeatures nanan When set to On Fun Link functions are enabled Selects if you have connected an external device that is compatible with the Fun Link function Off Disables all Fun Link Auto Device Off You can set your device to turn off by interlocking from his unit s power Use A Y to select the desired setting then press OK When set to On and TV is turned off connected devices are turned off automatically On Your connected Fun Link device turns off automatically when you turn off the unit off Your connected Fun Link device stays on even if you turn off the unit Auto TV On This unit will turn on detected when the power on signal is sent from your connected Fun Link device Use A to select the desired setting then press OK Auto TV On When set to On TV and connected device are turned on automatically This unit turns on automatically when you turn on On your connected Fun Link device off This unit stays off even if you turn on your connected Fun Link device Device List This function lets you see the product model number or name of connected devices Use A Y to select the desired HD the TV screen then press OK device listed on Device List HDMI NB530MGX HDMI2 MBP1100 F7 BACK Input Change Back P sel a elect 6 Press MENU to exit Energ
11. by some retailers This Limited Warranty does not cover Shipping charges to return defective product Labor charges for installation or setup of the product adjust ment of customer controls on the product and installation or repair of antenna signal source systems outside of the product e Product repair and or part replacement because of improper installation or maintenance connections to improper voltage supply power line surge lightning damage retained images or screen markings resulting from viewing fixed stationary con tent for extended periods product cosmetic appearance items due to normal wear and tear unauthorized repair or other cause not within the control of the company Damage or claims for products not being available for use or for lost data or lost software Damage from mishandled shipments or transit accidents when returning product A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications A product used for commercial or institutional purposes including but not limited to rental purposes Product lost in shipment and no signature verification receipt can be provided e Failure to operate per Owner s Manual TO OBTAIN ASSISTANCE Contact the Customer Care Center at 1 866 321 3927 REPAIR OR REPLACEMENT AS P
12. Autoprogram again u p 19 IA m SENS _lfthere is no signal input from the antenna terminal and no operation for Select your signal source Cable several seconds after you turn on the unit Helpful Hints appears Follow le Antenna m Skip he instructions listed on the TV screen ois Or able D Jm ad BACK MENU Select OK Back Skip Initial Setup No channel is registered Try Autoprogram again Verify that you have a cable connected to the ANT IN jack on the back of the TV the channel installation process searches this connection If you are using a cable or satellite box please confirm the input which you have connected the box and press SOURCE key on the remote control to select the appropriate source input we es Select C OK Skip Please wait while the system is scanning for channels s r Aio serena na e nae tan 20 in o com e You must set Home in step 4 Otherwise the settings of picture and sound quality you adjusted will not be memorized after you turn off the unit After an initial setup is completed e Ifyou want to scan the channels automatically again MENU skip Autoprogram im p 19 e You can add the desired cable and analog channels unmemorized by autoprogram Add Channels in p 20 If you want to change to another language Language Selection p 21 f you want to change the location setting Locati
13. IR Signal Check If the remote control is not working properly you can use a digital camera including a cellular phone with built in camera to see if it is sending out an infrared signal With a digital camera including built in cell phone cameras Point the Digital Camera towards the remote control infrared diode at the front of the remote control Press any button on the remote control and look through the camera display If the infrared pulsating light appears through the camera the remote control is sending out an IR signal 35 EN 36 EN General Specifications TV format ATSC NTSC M TV standard Closed caption system 15 122 FCC digital CC 15 119 FCC analog CC Channel coverage ATSC NTSC Terrestrial DTV ATSC VHF 2 13 UHF 14 51 each channel has e g 2 1 2 9 3 1 39 etc Terrestrial Analog NTSC VHF 2 13 UHF 14 69 2 13 A W W 1 W 94 analog W 1 W 84 A 5 A 1 5A Channel frequency synthesized tuning system Direct access keyboard Programmable scan and up down CATV Tuning system Channel access Electrical Specification Audio Output 3W 80Q x2 Designs and specifications are subject to change without notice and without our legal obligation e If there is a discrepancy between languages the default language will be English Other Specifications Terminals Antenna Input VHF UHF CATV 75 Q unbalanced F type Audio Input RCA jack L R x 6 500mV rms Compos
14. This crops out the left and right sides of the picture For 4 3 video signal Normal displays a 4 3 picture at its original size Sidebars appear on both edges of the screen 16 9 displays a 4 3 picture at a 16 9 size the picture is stretched horizontally to fill the screen Movie Expand displays a 4 3 picture at a 16 9 size he picture is stretched more vertically at the top of he screen This crops out the top of the picture Zoom displays a 4 3 picture at a 16 9 size at its maximum size that is more vertically stretched to fill he screen This crops out the top and bottom of the picture Wide displays the picture with its center at the Wid Z ne Si ee original size and the edges stretched horizontally to fill he screen For PC input signal Normal displays a proportionately stretched picture Sidebars appear on both edges of the screen Full displays a picture that is stretched out of proportion horizontally to fill the screen Dot By Dot displays a picture in its original size Normal Dot By Dot Channel Selection Select channels by using CH 4 or the Number buttons e To select the memorized channels use CH A V or the Number buttons 11 1 e To select the non memorized channels use the Number buttons To use the Number buttons When selecting digital channel 11 1 When selecting cable or analog channel 11 Be sure to press before entering the subchannel number a 6 0 8 8 8
15. batteries may cause damage to the device e Do not mix different types of batteries together e g Alkaline and Carbon Zinc or rechargeable batteries like ni cad ni mh etc or old batteries with fresh ones e Ifthe device is not to be used for a long period of time remove the batteries to prevent damage or injury from possible battery leakage e Do not try to recharge batteries they can overheat and rupture EN 1 SOURCE m p 16 2 SLEEP m p 16 3 BACK m p 18 Press to return to the previous menu operation 4 A V lt 4 cursor m p 15 5 MENU im p 19 6 OK im p 15 7 VOL A V m p 16 8 MUTE 2 i gt p 16 9 Number buttons m p 17 e dot Press to shift the subchannel from the main channel 10 PREV CH m p 17 Press to return to previously viewed channel 11 power m p 15 12 FORMAT E1 im p 17 Press to select aspect ratio available for the TV screen 13 FREEZE m p 17 Press to freeze screen image 14 ECO m p 18 Press to reduce the brightness 15 INFO im p 18 16 SAP m p 16 17 CH A F m p 17 Installing the Batteries Install the batteries AAA 1 5V x 2 matching the polarity indicated inside battery compartment of the remote control PREPARATION No supplied cables are used with these connections Please purchase the necessary cables at your local store High Speed HDMI cable also known as HDMI category 2 cable is recommended for the better compatibility Before
16. be able to select the channel again using CH A V e To reactivate a removed channel use A V and press OK The registered channels are highlighted e When you remove a main channel its subchannels are removed as well 5 Press MENU to exit Note e The channel with the DTV indicated on the display is ATSC Otherwise the channel is NTSC Add Channels This function lets you add the channels that were not added by the autoprogram due to reception conditions at the initial setting Press MENU to display the main menu 2 Use A Y to select Setup then press OK 3 Use A Y to select Add Channels then press OK 4 Use the Number buttons to enter the number of the channel you want to add then press OK For analog channels select a channel to be added using number keys For digital channels you must perform Autoprogram function Ch Change BACK Back 5 Press MENU to exit Note f setup completes successfully Added to the channel list is displayed e f external input is used it is not possible to register the channel and Unavailable will be displayed on the TV screen e By using CH A Y you can select the memorized channels only Antenna Confirmation TED This function lets you check the digital signal strength of each channel Press MENU to display the main menu Use A Y to select Setup then press OK 1 2 3 Use A Y to select Antenn
17. caption on your TV screen broadcast signal must contain the closed caption data e Not all TV programs and commercials have the closed caption or all types of the closed caption e Captions and texts may not exactly match the TV voice e Changing channels may delay the closed caption for a few seconds e Adjusting or muting the volume may delay the closed caption for a few seconds e Abbreviations symbols and other grammatical shortcuts may be used in order to keep pace with the on screen action This is not a malfunction e The caption or text characters will not be displayed while the main menu or functions display is shown e Ifa black box appears on the TV screen this means that the closed caption is set to the text mode To clear the box select CC 1 CC 2 CC 3 CC 4 or Off If the unit receives poor quality television signals the captions may contain errors or there might be no captions at all Some possible causes of poor quality signals are Automobile ignition noise Electric motor noise Weak signal reception Multiplex signal reception ghosts or screen flutter Data dropout and Pixelation for DTV only e The unit retains the closed caption setting if the power fails When the unit receives special effects playback signal e g Search Slow and Still from a VCR s video output channel ch3 or ch4 the unit may not display the correct caption or text Chi Child Id Lock
18. ock reads the ratings for programs then denies access to the programs which exceed the rating level you set With this fu for ch invisib nction you can block certain programs inappropriate ildren and any channels or external input modes can be e ress MENU to display the main menu 1 2 Use A Y to select Features then press OK 3 Use A Y to select Child Lock then press OK Features Closed Caption PC settings Fun Link Energy Saving Mode Location Current Software Info 4 Use the Number buttons to enter the 4 digit numbers for your PIN code Enter PIN When you have not set up your PIN code enter 0 0 0 0 When the PIN code is correct Child Lock menu is displayed See the following description for setting each item _ Child Lock US TV Ratings Lock Canadian English Rating Canadian French Rating Region Ratings Lock Clear Region Ratings Lock Change PIN Note e Wh blocked automatically The lower ratings will be available for viewing e Wh automatically To block any inappropriate programs set your limits in US Movie Ratings Lock US TV Ratings Lock and Region Ratings Lock e The e lfth e Region Ratings Lock will be available when the unit receives a digital broadcast using the new rating system e For if re The CRTC policy code reverts to 0000 en you select a rating and set it to Block the higher
19. production companies can display a dialogue to maximum insure that the captions remain up to date with a few seconds behind the actual dialogue are common for live If a dialogue exceeds that rate selective editing is used to he current TV screen dialogue How can set the clock There is no clock function on this unit EN INFORMATION Glossary ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards Aspect Ratio The width of a TV screen relative to its height Conventional TVs are 4 3 in other words the TV screen is almost square widescreen models are 16 9 the TV screen is almost twice as wide as its height Component Video This is a video signal format that conveys each of 3 principal colors of light red blue and green through different signal lines This allows the viewers to experience picture colors as original as it is There are several signal formats including Y Pb Pr and Y Cb Cr Dolby Digital The system developed by Dolby Laboratories to compress digital sound It offers stereo sound 2ch or multi channel audio HDMI High Definition Multimedia Interface Interface that supports all uncompressed digital audio video formats including set top box BD DVD recorder or digital television over a single cable HDTV High Definition TV Ultimate digital format that produces high resolution and high picture qua
20. ratings will be en you set the highest rating to View all ratings turn to View child lock setting will be retained after a power failure except the PIN e rating is blocked will appear the United States the unit may download the Region Ratings Lock Table quired Canadian rating systems on this unit are based on CEA 766 A and English Nena bat Particular channels or external input modes can be invisible in this function Use A Y to select Channel Lock then press OK Use A Y to select the desired rating then press OK repeatedly to switch between View and Block ca toe BACK es Select View Block Back Press MENU to exit 0 E 0 Z S lings Z BASetting WS iMovieratings US Movie ratings lock is the rating system created by MPAA 5 Use A Y to select US Movie Ratings Lock then press OK Use A to select the desired rating then press OK repeatedly to switch between View and Block BACK View Block Back lt gt Select Rating Category X Mature audience only NC 17 No one under 17 admitted R Restricted under 17 requires accompanying parent or adult guardian PG 13 Unsuitable for children under 13 PG Parental guidance suggested G General audience NR No rating Press MENU to exit 27 EN 28 CaSetting I Vgratings 5 Use A Y to select US TV Ratings Lock then press OK 6 Use amp
21. the apparatus The caution marking is located on the rear or bottom of the cabinet Important Safety Instructions Os OW oa Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet accordance with the manufacturer s instructions 10 11 12 13 14 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during light
22. to the unit are connected to the correct output jack of your device like BD DVD recorder e View other TV channels The problem might be limited to the broadcasting station or weak signal strength e Turn off the unit and wait for about 1 minute then turn on the unit again e Check whether the connection of the antenna cable receiver or satellite box is connected correctly ake sure that the selected input mode is connected to the working input jack e Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode Tap any key on the keyboard to wake up your computer 7 ake sure that the sound is not muted Press MUTE 1X so that the volume bar and current volume level will appear on the TV screen ake sure that the volume is NOT set to 0 or Mute If so use VOL A V to adjust the desired volume No picture or sound e View other TV channels The problem might be limited to the broadcasting station No color Adjust Color in the main menu Adjusted Picture or Sound settings are not effective every time the unit is turned on You must set Home in Location 1 p 31 Otherwise the settings you adjusted will not be memorized after you turn off the unit e Electrical interference from nearby appliances may affect picture quality e Adjust Contrast and Brightness in the main menu View other TV channels The problem might be limi
23. 0 Press PREV CH to return to the previously channel Note e No Signal will appear on the TV screen after the subchannel broadcast is over e Audio only program message will appear on the IV screen when you receive only sound signal 17 EN TV Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen In the digital mode the detailed broadcasting information for the current channel such as program title program guides are displayed Press INFO A Day of Memories A quarter century ago which may now qualify as the good old days of newspapering run of paper sales accounted for 80 percent of the industry s advertisin t 1 program title 2 program guide The program guide added to broadcasting information is displayed to a maximum of 4 lines 3 broadcast station 4 channel number 5 audio language ATSC audio mode NTSC Switching Audio Mode m p 16 6 effective scanning lines and scan mode 7 TV format 8 program aspect ratio 9 CC not available if closed caption is set to Off 10 child lock rating e To clear the display press INFO again You can also press BACK Note e When the program guide consists of more than 4 lines use A Y to scroll e No description provided is displayed when the program guide is not provided While the program guide is displayed the closed caption function is interrup
24. CEC compatible amp with a HDMI cable For details look in the user manual The sound will be output from the unit s speakers The sound will not be output from the units speakers You can control audio output from your connected HDMI link devices by using this unit s remote control Ext Amp 0 a 0 Z S gt Z Note e We do not guarantee 100 interoperability with other brands of HDMI link compliant devices Primary MTS You can set the output mode as a default for the sound mode NTSC only This setting is not interlocked when you change the output mode by pressing SAP Sound Functions im p 16 Use A to select the desired option then press OK m 14 nd _ sound _ Sound Mode Equalizer TV Speakers Primary MTS Mono f MiEcatures SAP Stereo Outputs stereo audio Mono Outputs mono audio SAP Outputs second audio program 5 Press MENU to exit 23 EN __24 EN Closed Caption You can view closed captioning CC for TV programs movies and news Closed caption refers to text of dialogue or descriptions displayed on screen Press MENU to display the main menu Use A Y to select Features then press OK 3 Use A Y to select Closed Caption then press OK See the following description for setting each item Closed Caption Caption Service Digital Caption S
25. Component Video Input jacks connect audio cables to the Audio L R Input jacks right beside the Component Video connector e g BD DVD recorder with the component video output jack COMPONENT VIDEO OUT 4 ly o Pr Grl green 3 Fed aa OUT component video cables red blue green audio cables rear of this unit c Note e The unit accepts 480i 480p 720p and 1080i of video signals for this connection S Video Connection S Video connection offers good picture quality for video devices connected to the unit If you connect to the unit s S Video Input jack connect audio cables to the Audio L R Input jacks right beside the Composite Video connector e g BD DVD recorder camcorder and VCR with the S Video output jack y N S VIDEO A AUDIO on amp ZT m gt S a Z S Video side of this unit 11 EN No supplied cables are used with these connections Please purchase the necessary cables at your local store Composite Video Connection Composite Video connection offers standard picture quality for video devices connected to the unit If you connect to the units Composite Video Input jack connect audio cables to the Audio L R Input jacks right beside the Composite Video connector When the audio jack of the video dev
26. Espa ol Fran ais English SYLVANIA LC220SL1 LC190SL1 EN Owner s manual Need help Please call toll free or visit our web site below FR Manuel du propri taire Besoin d aide Appelez notre num ro gratuit ou visitez notre site web l adresse ES Manual del propietario Necesita ayuda Llame por favor sin costo visite nuestro sitio web en 1 866 321 3927 www sylvaniaconsumerelectronics com MODEL NUMBER SERIAL NUMBER 2010 Funai Electric Co Ltd APPARATUS TO RAIN OR MOISTURE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON THE APPARATUS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS CAUTION RISK OF ELECTRIC SHOCK OPEN DO NOT CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the apparatus s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons A The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying
27. Panel 11 Antenna Input jack m p 9 Z 12 AC power cord m p 14 3 13 PC VGA Input jack m p 13 14 HDMI 1 Input jack im p 9 10 15 Component Video and Audio L R Input jacks 2 m p 9 11 16 Digital Audio Output jack im p 12 J ommended 17 Audio Input jack for PC connection amp E miroir m p 13 L 5 Mini plug audio cable connection from your PC 18 Audio L R Input jacks for HDMI 1 m p 10 T Audio cable connection from your DVI device For HDMI 1 Input jack only Z Note for service terminal service terminal service use only Use this terminal only when a software update is necessary User should not connect any devices to the terminal such as digital camera keyboard mouse etc because these will not work 2 The software update is in most cases handled by an authorized service person or in some circumstances the user may be asked to do the software update themselves L EN Remote Control Function 1 SOURCE FREEZE FORMAT N ann A ww N 10 When using a universal remote control to operate this unit Make sure the component code on your universal remote control is set to our brand Refer to the manual accompanying your remote control for more details e We do not guarantee 100 interoperability with all universal remote controls Battery Precautions e Be sure to follow the correct polarity as indicated in the battery compartment Reversed
28. ROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON SUMER WITH THE ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MER CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusions or limitation of inciden tal or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may have other rights which vary from state province to state province FUNAI CORPORATION Inc 19900 Van Ness Avenue Torrance CA 90501 Printed in China 37 EN
29. a then press OK 4 Use the Number buttons or CH A to select the channel for which you want to check the digital signal strength l Antenna Ui ZS current 50 Max e Ifthe channel is set to analog cable channel or external input you cannot confirm the antenna condition Indicator is available for digital broadcasting Ch Change 5 Press MENU to exit English Language Selection You can choose English Spanish or French as your on screen language Press MENU to display the main menu 2 Use A Y to select Language then press OK 3 Use A Y to select English Espa ol or Fran ais then press OK English Espa ol Fran ais 4 Press MENU to exit Note e f you need the English menus instead of the Spanish or French menus press MENU Use A Y to select Idioma or Langue then press OK Use A to select English then press OK Press MENU to exit the main menu 0 a 0 Z S gt 7 Z 21 EN Picture Adjustment You can adjust picture mode or customize the picture quality as your preference Before you begin You must set Home in Location im p 31 Otherwise the settings you adjusted will not be memorized after you turn off the unit Press MENU to display the main menu 2 Use A Y to select Picture then press OK 3 Use A Y to select the item you want to adjust then press Picture Mode Personal Bright
30. ace anything directly on top or bottom of the unit Depending on your external devices noise or disturbance of the picture and or sound may be generated if the unit is placed too close to them In this case please ensure enough space between the external devices and the unit Depending on the environment the temperature of this unit may increase slightly This is not a malfunction e Be sure to unplug the AC power cord from the AC outlet before carrying the unit 3 ENERGY STAR ENERGY STAR is a joint program of the U S Environmental Protection Agency and the U S Department of Energy helping us all save money and protect the environment through energy efficient products and practices Consumer Notice This TV has been set to maximize energy efficiency while delivering the best possible picture using the factory installed home mode settings Changing or enabling other features in this TV e g brightened backlighting will possibly increase energy consumption beyond the original ENERGY STAR qualified limits The American Academy of Pediatrics discourages television viewing for children younger than two years of age 3 EN INTRODUCTION Contents Important Safety Instructions Trademark Information INTRODUCTION Features Supplied Accessories Symbols Used in this Manual Attaching the Base Fixing the Unit on Your Furniture Control Panel Terminals Remote Control Function Installing the Batteri
31. aption format which displays the dialogue of a TV program or other text information across the TV screen Features Child Lock u p 27 e You can set viewing limitations PC Settings im p 29 e You can adjust the position stability and clarity of the PC screen Fun Link m p 30 e You can set Fun Link options Energy Saving Mode im p 31 Location m p 31 e Switch setting from Retail to Home to allow the desired Picture and Sound mode to be kept in memory Current Software Info Language Language Selection im p 31 im p 21 e Change the Main Menu language English Autoprogram If you switch wires e g between antenna and CATV or if you move the unit to a different area after the initial setting or if you restore the DTV channels you deleted it is recommended to use Autoprogram to perform a new channel search Before you begin Make sure the unit is connected to antenna or cable Press MENU to display the main menu Use A Y to select Setup then press OK 1 2 3 Use A Y to select Autoprogram then press OK 4 Use A to select an appropriate option then press OK Autoprogram will rescan all channels Auto programming may take more than 20 minutes to Antenna complete Cable Select your signal source e When connected to VHF UHF antenna select Antenna e When connected to CATV select Cable e Autoprogram will begin 75
32. ase adjust the settings manually e Adjust Phase setting after Clock setting has been properly adjusted 5 Adjust the setting 0 3 0 Z S gt 1 Z Auto Adjustment Use A Y to select Adjust then press OK Auto Adjustment Cancel To automatically synchronize the phase and clock on the TV and PC Adjust e The horizontal vertical position clock and phase of the PC screen are automatically adjusted Horizontal Position Vertical Position Use lt P to adjust Cursor lt Cursor gt Horizontal Position to move PC to move PC screen left screen right to move PC to move PC V Position screen down screen up amp Adjust 29 EN 30 EN Fun Link This function allows you to operate the linked functions between our brand devices with a Fun Link feature and this unit connecting through an HDMI cable 1 Press MENU to display the main menu 2 Use A Y to select Features then press OK 3 Use A Y to select Fun Link then press OK Fun Link e Lane Fun Link Control Auto Device Off Auto TV On Device List Ur DATES Mes L Use A Y to select the desired setting then press OK Adjust the following items Fun Link Control Set the Fun Link On or Off The following additional settings will be in gray when you set to Off Use A Y to select the desired setting then press OK
33. e Component Video Input jacks of the unit to the HDMI or the component video output jacks of the cable receiver satellite box If you connect to the units Component Video Input jacks connect audio cables to the Audio L R Input jacks right beside F the Component Video connector S e g 5 satellite dish zZ e e e e Kid RF coaxial cable ecco cable TV signal cable receiver including PPV satellite box E rom out USE TTT rs ot component video cables r red blu green and audio cables HDMI cable side or rear of this unit You can also connect this unit to the cable receiver or satellite box other than the HDMI or the component video output jacks because they might have different output jacks Required cables and connecting methods of the cable receiver satellite box or the availability channel for the clear QAM may differ depending on the cable satellite provider For more information please contact your cable satellite provider EN 10 EN No supplied cables are used with these connections Please purchase the necessary cables at your local store High Speed HDMI cable also known as HDMI category 2 cable is recommended for the better compatibility External Device Connection HDMI Connection DMI connection offers the highest picture quality DMI High Definition Multimedia Interface transpor
34. ervice Caption Style Ta Features Ow Use A Y to select Caption Service then press OK Use A Y to select the desired closed caption then press OK Closed Caption Caption Service Digital Caption Service Caption Style The primary caption and text services The captioning or text is displayed in the same CC 1 andT 1 language as ue program s dialogue up to 4 lines of script on the TV screen where it does not obstruct relevant parts of the picture Serve as the preferred data channels CC 3 and T 3 The captioning or text is often a secondary language Rarely available and broadcasters use them CC 2 CC 4 only in special conditions such as when T 2 and T 4 CC 1 and CC 3 or T 1 and T 3 are not available e There are 3 display modes according to programs Displays input characters on the TV screen Paint on mode x immediately Once characters are stored in memory Pop on mode f hey are displayed all at once Roll up mode Displays the characters continuously by scrolling max 4 lines Press MENU to exit gt In addition to the basic closed caption DTV has its own closed caption called digital caption service Use this menu to change the settings for digital caption service 4 Use A Y to select Digital Caption Service then press OK 5 Use A Y to select the desired digital caption service then press OK
35. es WwW OO J ON E a U1 U1 U1 HE PREPARATION Antenna Connection Connection to Cable Receiver or Satellite Box External Device Connection Plug In the AC Power Cord Initial Setup mB OOO WATCHING TV Switching Each Input Mode Sleep Timer Sound Functions Freeze Mode TV Screen Display Mode Channel Selection TV Screen Information Reducing the Brightness OPTIONAL SETTING Main Menu Autoprogram Channel List Add Channels Antenna Confirmation Language Selection Picture Adjustment Sound Adjustment Closed Caption Child Lock PC Settings Fun Link Energy Saving Mode Location Current Software Info OMWONNNDAAD 20 20 22 23 24 27 30 TROUBLESHOOTING Troubleshooting Guide FAQ 32 34 EN INFORMATION Glossary Maintenance General Specifications Electrical Specification Other Specifications Limited Warranty Features e DTV TV CATV You can use your remote control to select channels which are broadcast in digital format and conventional analog format Also cable subscribers can access their cable TV channels e Information Display ATSC only You can display the title contents and other information of the current DTV program on the TV screen e Autoprogram This unit automatically scans and memorizes channels available in your area eliminating difficult setup procedures e Child Lock This feature allows you to block children s access to inapprop
36. et Home in Location im p 31 Otherwise the settings you adjusted will not be memorized after you turn off the unit Press MENU to display the main menu 2 Use A to select Sound then press OK 3 Use A Y to select the item you want to adjust then press OK Sound Sound Mode Standard Equalizer TV Speakers Ext Amp Primary MTS Stereo 4 Adjust the following items Sound Mode Use A Y to select the desired setting then press OK Personal Standard Movie Music and News Sound Sound Mode Equalizer Personal Standard TV Speakers Movie D Sound Mincatures Primary MTS Music News Equalizer Adjust tonal quality for each frequencies Use lt P to select the specific frequency and use A V to adjust the level then press OK Equalizer 120Hz 500Hz 1 5kHz 5kHz 10kHz English TV Speakers Select the audio output from the unit s speakers or not If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit some sound operations such as volume up can be changed by using this units remote control Make sure Fun Link Control is set to On gt p 30 Use A to select the desired option then press OK TV Speakers On On Sound will be output from the TV Off speakers Ext Amp off Sound will not be output from the TV speakers Ext Amp Operation is possible by connecting to the HDMI
37. he AC power cord while turning the unit on wait for 10 seconds to plug the AC power cord again The unit will restore the PIN code to 0000 as the factory default Pa Select View Block Back Sub Rating Category Rating FV Fantasy Violence TV Y7 v Violence TV MA S Sexual Situation TV 14 L Coarse Language V PG D Suggestive Dialogue TV 14 TV PG Note Blocked sub rating will appear beside the main rating category in US TV Ratings Lock menu You cannot block a sub rating D L S or V if the main rating is set to View Changing the category to Block or View automatically changes all its sub ratings to the same Block or View English PC Settings Clock Phase This function lets you adjust the PC screen position clock and Use to adjust Clock setting to stabilize phase during PC input the PC screen and Phase setting to improve the clarity Press MENU to display the main menu of the PC screen Use A Y to select Features then press OK Cursor Cursor gt 2 3 Use A Y to select PC Settings then press OK 4 to decrease to increase setting value setting value Use A Y to select the setting you want to adjust then press OK PC Settings Auto Adjustment 6 Press MENU to exit Horizontal Position x E Note Vertical Position Clock You may not obtain an appropriate screen with Phase Auto Adjustment for some signals In this c
38. he volume level from the last time you adjusted it the volume of the sound from another device is higher or lower then the lou dness will You switch to a different input and the screen size changes input modes This unit will memorize the viewing mode from the last time you used the part icular The display image does not cover he entire screen f you are using the u Vertical Position in PC Settings are set correctly nit as a PC monitor make sure that Horizontal Position and f you are watching TV or using the Composite Video S Video Component Video or HDMI with 480i Input press FORMAT g repeatedly to switch various screen modes Captions are displayed as a white box caption is displayed in the Closed Caption supported program Black box is displayed on the TV screen nterference from bui Broadcasting station may shorten the program to insert advertisement The closed caption d Idings or weather conditions may cause captioning to be incomplete ecoder cannot read the information of the shortened program The text mode is selected for caption Select CC 1 CC 2 CC 3 CC 4 or Off Note e The LCD panel is manufactured to provide many years of useful life Occasionally a few non active pixels may appear as a fixed point of blue green or red This is not to be considered a defect in the LCD screen e Some functions are not a
39. horized commercial distribution of this manual or any revision hereto is strictly prohibited Information in this document is subject to change without notice Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes FUNAI with the design is a registered trademark of Funai Electric Co Ltd and may not be used in any way without the express written consent of Funai All other trademarks used herein remain the exclusive property of their respective owners Nothing contained in this manual should be construed as granting by implication or otherwise any license or right to use any of the trademarks displayed herein Misuse of any trademarks or any other content in this manual is strictly prohibited Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law SYLVANIA is a registered trademark of OSRAM SYLVANIA Inc used under license English direction 1 Spread a thick and soft cloth over a table as shown Place the main unit face down onto it Make sure not to damage the screen 2 nsert 2 hooks under the Remote control bottom of the main unit NHO01UD into base holes shown by arrow D then move the J base in the direction as D Supplied Accessories Attaching the Base E 0 y You must attach the base to the unit to have it as a table top Owner s manual Quick Start unit Be sure the front and rea
40. ice is monaural connect an audio cable to the Audio L Input jack e g T AUDIO OUT VIDEO L R OUT q camcorder video game audio cables video cable Ex CT side of this unit Note e If you connect to the S Video Input jack and the Composite Video Input jack at the same time the S Video connection will have priority 12 EN Digital Audio Output Connection for digital broadcasting only If you connect this unit to an external digital audio device you can enjoy multi channel audio like 5 1ch digital broadcasting sound Use a digital audio coaxial cable to connect the unit to external digital audio devices e g Dolby Digital decoder ha DIGITAL AUDIO COAXIAL IN D rear of this unit Recommended EE oora MNI Posse auio our COAXIAL digital audio coaxial cable English PC Connection This unit is equipped with a PC input jack If you connect this unit to your PC you can use this unit as a PC monitor Use an VGA cable for this connection and it requires stereo mini plug audio cable as well e g rear of this unit D 5 gt S a O Z commended Ht Re picrraL een lauoio our coaxial Oo F stereo mini plug cables VGA cable should be with ferrite core personal computer The following video signals can be displayed
41. issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase Warranty Period from an Authorized Dealer The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof WHAT IS COVERED This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period At its option the company will either 1 repair the product at no charge using new or refurbished replacement parts or 2 exchange the product with a product that is new or which has been manufactured from new or ser viceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory or 3 refund the original purchase price of the product Replacement products or parts provided under this warranty are covered against defects in materials and workmanship from the date of the replacement or repair for ninety 90 days or for the remaining portion of the original product s warranty whichever provides longer coverage for you When a product or part is exchanged any replacement item becomes your property and the replaced item becomes company property When a refund is given your product becomes company property Note Any product sold and identified as refurbished or renewed carries a ninety
42. ite Video Input RCA jack x 1 1V p p 750 S Video Input Mini DIN 4 pin jackx1 Y 1V p p 75 Q C 286mV p p 750 Component Video Input RCA jack x 3 Y 1V p p 75 Q Pb Cb 700mV p p 75Q Pr Cr 700mV p p 750 HDMI Input PC Input HDMI 19 pin x 2 D Sub 15 pin x 1 RGB Mini jack 3 5mm x 1 Audio Coaxial Digital Audio Output RCA jack x 1 1 8 inches x 1 3 5mm 500mV p p 75 Q Headphone Remote control Digital encoded infrared light system Operating temperature 41 F 5 C to 104 F 40 C Power requirements 120V AC 10 60Hz 0 5 For LC220SL1 22 inches 21 6 inches measured diagonally LCD Power consumption maximum 67 W Dimensions lt without base gt lt with base gt Width 21 4 inches 542 8mm 21 4 inches 542 8mm Height 148 inches 373 6mm 16 2 inches 411 2mm Depth 39 inches 96 7mm 8 3 inches 210 0 mm Weight 971 lbs 4 40kg 10 37 Ibs 4 70kg LCD For LC190SL1 19 inches 18 5 inches measured diagonally Power consumption maximum 51 W Dimensions lt without base gt lt with base gt Width 18 8 inches 477 5mm 18 8 inches 477 5 mm Height 13 1 inches 330 4mm 14 5 inches 365 8 mm Depth 3 5 inches 88 7mm 8 3 inches 210 0 mm Weight 7 94 Ibs 3 60kg 8 60 Ibs 3 90kg English LIMITED WARRANTY NINETY 90 DAY LABOR ONE 1 YEAR PARTS WARRANTY COVERAGE This warranty obligation is limited to the terms as set forth below WHO IS COVERED This product warranty is
43. lity NTSC Acronym that stands for National Television Systems Committee and the name of analog broadcasting standards Off the air NTSC signals are no longer being sent by major broadcasting stations in the USA PIN code A stored 4 digit number that allows access to parental control features SAP Secondary Audio Program Second audio channel delivered separately from main audio channel This audio channel is used as an alternate in bilingual broadcasting SDTV Standard Definition TV Standard digital format that is similar to the NTSC picture quality S Video Offers higher quality images by delivering each signal color c and luminance y independently of each other through a single cable English Maintenance Cabinet Cleaning Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry Never use a solvent or alcohol Do not spray insecticide liquid near the unit Such chemicals may cause damage and discoloration to the exposed surfaces Panel Cleaning Wipe the panel of the unit with a soft cloth Before cleaning the panel disconnect the AC power cord Servicing Should your unit become inoperative do not try to correct the problem yourself There are no user serviceable parts inside Turn off the unit unplug the AC power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center
44. ness Contrast Color Tint Sharpness Color Temperature 4 Adjust the following items Picture Mode Use A Y to select the desired setting then press OK Personal Standard Sports Movie and Game Picture Standard Sports Picture Mode Brightness Contrast Color Movie Tint Game Sharpness Color Temperature 22 EN Brightness Contrast Color Tint Sharpness Color Temperature You can only adjust the following options when you set to Personal in Picture Mode Use A V to select the desired setting then use lt P to adjust Brightness Press lt q Press gt CET to decrease o increase Eh adjust Move ok brightness brightness Contrast Press lt Press gt Contrast 60 D o decrease o increase CCC ok contrast contrast Color Press lt Press gt Color 36 o decrease o increase amp Adjust Move ok color intensity color intensity amp Adjust Color Temperature Color Temp Normal sd e Adjust amp Move ox Press lt q o add warm colors Tint Press Press gt Tint m pe l o add red to add green tadjust 2 Moe ok Sharpness Press Press D Sharpness o soften to sharpen Press gt to add cool colors 5 Press MENU to exit Sound Adjustment You can adjust the sound mode equalizer and some other sound functions Before you begin You must s
45. ning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped English FCC WARNING This apparatus may generate or use radio frequency energy Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual The user could lose the authority to operate this apparatus if an unauthorized change or modification is made RADIO TV INTERFERENCE This apparatus has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This apparatus generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this apparatus does cause harmful interference to radio or television reception which can be determined by turning the apparatus off and on the user is encouraged to try
46. on u p 31 15 EN 16 EN WATCHING TV Switching Each Input Mode can easily switch with the remote control between TV ATSC or NTSC and external devices when they are connected to the unit Press SOURCE or CH A repeatedly to cycle through the input modes e g DTV TV channel Source Video Component HDMI1 HDMI2 PC SOURCE PC HDMI2 HDMI L FREEZE e Pressing CH W reverses the direction of the input modes Sleep Timer can be set to automatically turn off the unit after an incremental period of time Press SLEEP once to call up the display for checking the remaining time e To cancel sleep timer press SLEEP repeatedly until Sleep Off is displayed Z Zw Press SLEEP repeatedly to change the amount of time increases the time by 30 minutes up to 120 minutes until shut off Sound Functions describe how to change the audio or the audio language as well as the volume B Volume Adjustment will be displayed for a few seconds when adjusting the volume Use VOL A V to adjust the volume Volume a Silence Mode PREV CH Press MUTE X to turn off the sound temporarily will be is displayed for a few seconds e Press MUTE aX again or VOL A V to recover the original volume Switching Audio Mode Press SAP repeatedly to cycle through the available audio languages e Available languages differ depending on the broadcast e Other is dis
47. played when the audio language cannot be English 1 3 acquired or the acquired languages are other than English Spanish or French Press SAP to display the currently selected audio mode While receiving an MTS broadcast press repeatedly to cycle through 11 the available audio channel e g When all audio are available RSS MOTS Ces STEREO Outputs stereo audio SAP Outputs second audio program MONO Outputs mono audio FORMAT English Freeze Mode can freeze the image shown on the TV screen for 5 minutes Press FREEZE to freeze the image e The sound output will not be paused To cancel freeze mode press any buttons except TV Screen Display Mode 5 types of display modes can be selected when the broadcasting station is sending 16 9 or 4 3 video signal And 3 types of display modes can be selected for PC input signal Press FORMAT fe repeatedly to switch the TV aspect ratio For 16 9 video signal Normal displays a 16 9 picture at its original size 4 3 displays a 16 9 picture at a 4 3 size the picture is shortened horizontally Sidebars appear on both edges of the screen Movie Expand displays a 16 9 picture that is vertically stretched to fill the screen This only crops out the top of the picture lt Q E Z A 2 Zoom displays a 16 9 picture at its maximum size without changing its horizontal and vertical ratio Wide displays a horizontally stretched picture
48. pleted when you set up the unit for the first time or move it o a location where previously unavailable channels are broadcast received Make sure to complete jim p 19 The selected channel cannot be viewed by the Child Lock setting m p 27 The unit requires some kind of antenna input An indoor antenna VHF UHF eted LA p 1 9 TU not be broadcasting nterrupted and not completed some channels will not be UHF or an RF coaxial cable from your wall cable satellite into the unit How come there is no image from the connected external devices Check if the right input mode is selected by pressing SOURCE or using CH A V Switching Each Input Mode jim p 16 Check the antenna or cable connection to the unit When using the Component Video Connection check that the Green Y Blue Pb Cb and Red Pr Cr connectors are connected to their corresponding colored jacks on the unit Whenever entered channel number it changes automatically he unit changes the num station channel number e g inpu any digital channels have alternate channel numbers hese basic numbers used for previous analog broadcasts ch 30 auto change to ch 6 1 bers automatically to the ones signifying the broadcasting Why are captions not displayed entirely Or captions are delayed behind the dialogue Captions that are delayed of 220 words per minute broadcasts Most captioning
49. r of the base match the proper 6 1EMN26205 1EMN26266 Pee 2 Z shown by arrow until it stops and the 3 mounting holes are aligned Make sure not to put the AC power cord between the base and the unit 3 Drive Phi lips pan screws Batteries Screw kit into the 3 threaded holes AAA 1 5V x 2 for attaching the base at the bottom of the base 1ESA19876 until they are tight LS To remove the base from this unit e Unscrew the Phillips pan screws on step 3 After the screws are removed move the base in the opposite direction as If you need to replace these accessories please refer shown by arrow on step 2 then pull the base up toward the rear of the to the part No with the illustrations and call our toll unit Be careful not to drop the base when you remove it free customer support line found on the cover of this Note manual e When attaching the base ensure that all screws are tightly fastened If the N base is not properly attached it could cause the unit to fall resulting in ote injuries as well as damage to the unit e Ifyou lose the screws please purchase M4x12 Phillips head screws at your e Make sure to use a table which can support the weight of this unit and is local store larger than this unit e Make sure the table is in a stable location e When attaching the base ensure that FRONT T written on the base is upward If it s not upward the 2 hooks don t fit in the base
50. riate programs e Closed Caption Decoder Built in closed caption decoder displays text for closed caption supported programs e MTS SAP Tuner Audio can be selected from the remote control e Auto Shut Off Function If there is no input signal and no operation for 15 minutes the unit will turn off automatically e Sleep Timer This feature will automatically turn off the power of the unit at a specific time e Choices for On screen Language Select your on screen language English Spanish or French Stereo Sound Function e PLL Frequency Synthesized Tuning Provides free and easy channel selection and lets you tune directly to any channel using the number and decimal point e buttons on the remote control e Various Adjustment for Picture and Sound Customizes image quality suitable for your room and sets your sound preference e Fun Link via HDMI Link HDMI Cable not Included Fun Link allows your other HDMI link devices such as Magnavox DVD to be controlled by the HDMI cable connected to your TV e HDMI Input e Component Video Input e PC Input e S Video Input AV Input e Digital Audio Output e Headphone Audio Output 2010 Funai Electric Co Ltd All rights reserved No part of this manual may be reproduced copied transmitted disseminated transcribed downloaded or stored in any storage medium in any form or for any purpose without the express prior written consent of Funai Furthermore any unaut
51. ted In external input mode the following screen is displayed e g When an external device is connected to Video Input jack Video 480i SD TV PG DLSV CC e The information display will automatically disappear in 1 minute 18 EN Reducing the Brightness Backlight brightness can be reduced which may save on power consumption more than you just set On in Energy Saving Mode La p 31 Press ECO once to reduce the brightness Press ECO again to increase the brightness Note e Even if this function is in effect the brightness will be increased when you change Energy Saving Mode on or off due to the energy saving mode has priority e You must set Home in Location m p 31 Otherwise the settings you adjusted will not be memorized after you turn off the unit OPTIONAL SETTING Main Menu This section describes the overview of the main menu displayed when you press MENU The main menu consists of the function setting items below Press MENU Picture Picture Adjustment m p 22 Sound Sound Adjustment m p 23 Setup Autoprogram im p 19 e You can automatically scan the viewable channels Channel List in p 20 e The Channels that were autoprogrammed are in this Channel list use CH A V to access them Add Channels im p 20 e You can add TV channels that were not found by the autoprogram scan Closed Caption u p 24 e You can change the display closed c
52. ted to the broadcasting station or weak signal strength e For the best picture quality watch High Definition wide screen programs If the HD content is not available watch Standard Definition programs instead Sound OK picture poor e View other TV channels The problem might be limited to the broadcasting station or Picture OK sound poor weak signal strength Check if the audio cable is connected in correctly You may be getting interference from electrical appliances automobiles motorcycles or fluorescent lights e Try moving the unit to another location to see if this is the cause of the problem You see a distorted picture or hear an unusual sound e Electrical interference from nearby appliances may affect picture quality THE IE OP Sa ea in pietre i View other TV channels The problem might be limited to the broadcasting station 32 EN English Symptom Remedy You see noise or trash on the screen When the capabilities of the unit exceed the capabilities of the digital broadcast ing the signal will be increased to match the capabilities of the display of the unit This may cause noise or trash Different color marks on the TV screen View other TV channels The problem might be limited to the broadcasting stati missing data or pixelation on You switch to a different input and the volume changes This unit will memori change ze t
53. the displayed setting box not all selections show the differences selected 25 EN 26 EN Font Style Closed Captioning font style can be changed as illustrated Font Size Font size of the displayed caption can be switched as illustrated Font Color Font color of the displayed caption can be switched as illustrated Font Opacity Font opacity of the displayed caption can be switched as illustrated Background Color Background color of the displayed caption can be switched as illustrated Closed Caption Font1 Font2 Font3 Font4 Font5 Fonte FONT7 Closed Caption Closed Caption Black i Red C Green f Blue C LOONE _ Magenta Cyan Closed Caption Flash Translucent Transparent Closed Caption White Em Black i Red Green Blue C E C LOCE Magenta Cyan f Background Opacity Background opacity of the displayed caption can be switched as illustrated Closed Caption Flash Translucent Transparent Edge Color Closed Caption Edge color of the displayed caption can be switched as White illustrated Red C Green Blue i Yellow Om Magenta ETH Edge Type i Closed Caption Edge type of the displayed caption can be switched as illustrated Raised Depressed Uniform L Shadow R Shadow 8 Press MENU to exit Note e Closed caption will not be displayed when you are using an HDMI connection To show the closed
54. to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the apparatus and receiver 3 Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help DECLARATION OF CONFORMITY Trade Name SYLVANIA Responsible Party FUNAI CORPORATION Inc Model LC220SL1 LC190SL1 Address 19900 Van Ness Avenue Torrance CA 90501 U S A Telephone Number 1 866 321 3927 This Class B digital apparatus complies with Canadian ICES 003 Standard Television Receiving Apparatus Canada BETS 7 NTMR 7 CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type WARNING Batteries battery pack or battery installed shall not be exposed to excessive heat such as sunshine fire or the like Disconnect the mains plug to shut off when find trouble or not in use The mains plug shall remain readily operable This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 2 8 inches 7cm or more around this apparatus WARNING To prevent injury this apparatus must be securely attached to the wall in accordance with the instructions LAMP IN LCD CONTAINS MERCURY DISPOSE ACCORDINGTO LOCAL
55. ts high definition video and multi channel digital audio through a single cable e g BD DVD recorder with the HDMI output jack lt 4 HDMI cable M side or rear of this unit HDMI DVI Connection Use an HDMI DVI conversion cable to connect the unit to external video devices equipped with DVI output jack e g cable receiver or satellite box with the DVI output jack AUDIO OUT i R E HDMI DVI conversion cable rear of this unit Note For HDMI connection e The unit accepts 480i 480p 720p 1080i of video signals and 32kHz 44 1kHz and 48kHz of audio signals e This unit accepts only 2 channel audio signal LPCM e You need to select PCM for the digital audio of the device you connected or check the HDMI audio setting There may be no audio output if you select Bitstream etc e This unit accepts only signals in compliance with EIA861 For HDMI DVI connection The unit accepts 480i 480p 720p 1080i video signals e HDMI DVI connection requires separate audio connections as well and the audio signals are converted from digital to analog e DVI does not display 480i image which is not in compliance with EIA CEA 861 861B English Component Video Connection Component Video connection offers better picture quality for video devices connected to the unit If you connect to the units
56. vailable in specific modes but this is not a malfunction Read the description in this manual for more details on correct operations 33 EN FAQ Question Answer My remote control does not work What should do Check the antenna or cab Check the batteries of the remote control Check if there is an obstacle between the infrared sensor window and the remote control Test the signal output If OK then possible infrared sensor trouble IR Signal Check ma p 35 Aim the remote contro d he remote control signal Reduce the distance to the unit Re insert the batteries with When there is an infrared equipped device such as PC near this unit it may interrupt ove the infrared equipped device away from this unit change the angle of the infrared sensor or turn off the infrared communication function le connection to the main unit irectly at the infrared sensor window on the front of the unit heir polarities signs as indicated of this unit How come the Initial setup appears every time turn on this unit Connect the RF coaxial cable to the unit directly and run the initial setup ake sure to complete the channel scan before turning off the unit Why cannot watch some RF signal TV programs The selected channel may When Autoprogran is i an external antenna VHF box needs to be plugged ake sure Autoprogram has been com Autoprogram must be com
57. y Saving Mode You can set whether the power consumption is saved or not used Press MENU to display the main menu 2 3 Use A Y to select Energy Saving Mode then press OK Use A Y to select Features then press OK Use A Y to select the desired mode then press OK Energy Saving Mode 4 When set to On power consumption is reduced by decreasing backlight brightness On Reduces the power consumption The power consumption may possibly Off exceed the limited requirement of the ENERGY STAR qualification Press MENU to exit Location When you select Retail store the power consumption may possibly exceed the limited requirement of the ENERGY STAR qualification Press MENU to display the main menu Use A Y to select Features then press OK se A Y to select Location then press OK AUN Cc Use A Y to select the desired location then press OK Psound l Location Retail Home Location Home is recommended for normal home use In the Retail Store mode all settings are fixed Ur DATES 5 Press MENU to exit Press MENU to dis Use A Y to select English Current Software Info This function shows what version of the software currently play the main menu t Features then press OK Use A Y to select OK t Current Software Info then press Confirm the version of the software currently used
58. you connect Be sure your antenna or other device is connected properly before plugging in the AC power cord Antenna Connection Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit e g VHF UHF analog or DTV antenna Ean EEE TT cable TV signal RF coaxial cable rear of this unit Once connections are completed turn on the unit and begin initial setup Channel scanning is necessary for the unit to memorize all available channels in your area Initial Setup gt p 15 Note e Ifyou have any question about the DTV s antenna visit www antennaweb org for further information e Depending on your antenna system you may need different types of combiners mixers or separators splitters Contact your local electronics store for these items e For your safety and to avoid damage to this unit please unplug the RF coaxial cable from the antenna input jack before moving the unit e Ifyou use an antenna to receive analog TV it should also work for DTV reception Outdoor or attic antennas will be more effective than a set top or inside antenna To switch your reception source easily between antenna and cable install an antenna selector e Ifyou are not receiving a signal from your cable service contact the Cable provider English Connection to Cable Receiver or Satellite Box Use an HDMI or component video cables to connect the HDMI or th

www. sylvaniaconsumerelectronics.com

Contents

Download Pdf Manuals

Related Search

Related Contents