User Manual Laser products 2014
Contents
1. Eko Aims Laser manual 2014 User Manual Page 1 10 Laser manual 2014 2014 21 02 1 GENERAL DESCRIPTION OF EKO AIMS LASER PRODUCTS Eko Aims optical sport shooting equipment is suitable both for practising and competitions The core of the product is its software in the circuit board with an integrated laser module This equipment is compatible with the electronic targets approved by the International Modern Pentathlon Union UIPM The laser beam includes the 15 6 ms code required by UIPM for the year 2014 Also the 25 2ms pulse included to ensure maximum compatibility with officially homologated UIPM competition equipment To emulate traditional shooting the gun has a so called barrel time a time a bullet would normally take to go through the barrel This shot delay is 6ms The shooter should thus take into consideration the same aspects as with a normal gun when pulling the trigger These laser products belong to Laser Class 2 Products have been tested by Finnish Institute of Occupational Health among classification method EN 60825 1 2007 IEC 60825 1 2007 Please read the safety instructions carefully Buttons connectors and indicator lights Battery level Pulse code 15 6ms green 25 2ms red On Off button Charging led USB port for chargin pr Cocked green Please note In the earlier production lots the middle indicator led has had different functions In older products the red light can also define an un cod2. products delivered before 2014 pictured left o Turning the screw on the right side clockwise will move the hits to the left o Turning the screw on top of the sight clockwise will move the hits downward Eko Aims PS500 o Turning the screw on the right side clockwise will move the sight to the left o Turning the screw on the left side clockwise will move the sight downward 2 5 Trigger unit A micro switch and a magnet form the basis for the trigger mechanism The functions of the micro switch are adjusted at the factory and should not be manipulated Any unauthorised opening of the trigger mechanism will remove any guarantee from the manufacturer s side Adjusting the trigger The trigger adjustments are set at the factory to ensure that the trigger pulling force meets the ISSF shooting rules and that everything works smoothly The user may want to adjust the trigger to fit their personal needs Adjustments are recommended to be carried out in the following order Adjust the blade angle Turning the screw clockwise will turn the blade backwards Length of double pull Turning the screw clockwise will shorten the double pull 1 5mm Allen screw 3 Trigger stop Turning the screw clockwise will shorten the after travel of trigger after triggering Caution Too close adjustment will increase the trigger force and finally prevent the trigger mechanism from travelling over the threshold Double pull pressure 150 350g Turnin
3. OFF Sounds sounds On Off Page 3 10 Laser manual 2014 2014 21 02 Sensitivity sensitivity adjustment for BRU units Not needed with PP500 PP300 LP 2014 pistol The range of the setting can be from 0 127 Sensitivity is set at the factory to an average working value Remember to press Set sensitivity button to activate changes Software version States the current software version of the gun 2 3 Cocking and shooting fk Eko Aims UIPM 2014 Lasergun Setup v1 2 File Status Connected OK Sighting Counter Sounds Sensitivity Software version Read sensitivity Set sensitivity 1 Eko Aims UIPM 2014 Lasergun Setup v1 2 File Status Connected OK Sighting Counter Sounds Sensitivity Software version ReadSwver 3 PP300 PP500 LP 2014 The gun is cocked by using a cocking rod It has to be cocked after every shot fired PLEASE NOTE The cocking rod needs a little lubrication in the joint One drop once a month will be ok see chapter 5 Cleaning and maintenance for more details P3 E L has semiautomatic action so the pistol will reload itself and is ready for new shot after releasing the trigger 2 4 Sights The laser beam is fixed The initial zeroing has been done at the factory The end user can do the initial zeroing with the adjusting program but is not recommended Page 4 10 Laser manual 2014 2014 21 02 Adjusting the rear sight AZ version Eko Aims
4. The expected battery life is at least 24 months in regular use PP300 PP500 Open the hex screw and detach the front plate Slide the aluminium rail under the pistol forward Battery hatch is in front of the trigger Take the battery carefully out and disconnect the JST connector Connect new battery and put it in its place Close the hatch attach the front plate and tighten the hex screw LP 2014 detach the battery hatch on the right side of the pistol Open the torx screws and disconnect the battery s JST connector Take the battery out Connect new battery and put it in its place Close the hatch Page 8 10 Laser manual 2014 2014 21 02 4 SAFETY INSTRUCTIONS LASER RADIATION DO NOT LOOK DIRECTLY AT THE BEAM CLASS 2 LASER DEVICE This is a Class 2 sport shooting device The laser follows the standard EN 60825 1 2007 O O O O O O O O OO O type E650D1 3 1235 nominal wave length 650 nm nominal output 2 5mW never direct the laser beam at another person or an animal do not look at the beam either directly or through any optical devices do not direct the beam at air planes cars windows or other similar objects use the device only in an area specified for this purpose keep away from children do not hand over the device to anyone who does not understand the dangers of using the laser beam it is forbidden to open or modify the device excluding the changing of battery or the grip operating temperatu
5. ed laser pulse Before including two coding options there was also one production lot that had no function in the middle led and it was not in use at all 2 HOW TO USE THE SYSTEM 2 1 Start up Page 2 10 Laser manual 2014 2014 21 02 In the newer software version the user can only turn the gun on or off from the red button in the gun To change the settings the gun needs to be attached to a computer and the changes have to be done via Eko Aims UIPM2014 Lasergun Setup v1 x program In the early production models BRU amp ELP 2011 amp LP 2014 these changes are done by pressing the red power button longer or shorter times if Eko Aims UIPM 2014 Lasergun Setup v1 2 2 2 Lasergun Setup v1 x File Status Connected OK This program allows the user to make changes to the Sighting Counter Sounds Sensitivity Software version settings of the gun Sighting a pulsed beam to make initial sighting The gun needs to be connected to a computer during the sighting i Eko Aims UIPM 2014 Lasergun Setup v1 2 Status Connected OK Sighting Counter Sounds Sensitivity Software version Total shot counter C User shot counter Counter total shot counter and user shot counter which can be reset Click Read counters to show current shot count fk Eko Aims UIPM 2014 Lasergun Setup v1 2 Status Connected OK Sighting Counter Sounds Sensitivity Software version Set Sounds ON Set Sounds
6. g the screw clockwise will increase the pressure 5 Pull pressure 500g Turning the screw clockwise will decrease the pressure Page 5 10 Laser manual 2014 2014 21 02 First stage Blade length Blade angle Second stage pressure pressure Clockwise increase Clockwise decrease Trigger stop First stage travel Clockwise shorten 2 6 Changing the grip PP500 LP 2014 also ELP 2011 Steyr LP10 grips will fit PP500 or LP 2014 pistol Follow these instructions in changing the grip 1 Detach the original Eko Aims grip with 4mm Allen key Remove the grip 2 Attach the wooden grip to its place and tighten it with Allen key Please note The wooden grip might need some carving to fit the cocking rod and possibly some material under the metal plate of the grip attachment point Page 6 10 Laser manual 2014 2014 21 02 The original composite grips are adjustable Loosen the screws to change the height of the support plate Page 7 10 Laser manual 2014 2014 21 02 3 CHARGING amp CHANGING THE BATTERY The laser unit is charged via a USB cable It can be connected to a USB port of a computer or to mains current with USB charging device A green led indicates that the battery is being charged it turns off when the battery is full Re charging an empty battery takes about three hours When the battery runs very low the system gives a warning signal Changing the battery PP300 PP500 and LP 2014 only
7. re 100 500C WARNING Failure to follow these instructions may expose the user to dangerous laser radiation Read the safety instructions carefully before using the device Always follow firearm regulations when handling an optical gun Carry it in a proper case or bag A person not familiar with this kind of equipment may mistake it for a regular weapon not an optical and safe one The system is meant for outdoor use as well and is protected against normal humidity and rain Nevertheless heavy rain may damage the electronic parts Always cover the gun from rain Keep it in the carrying case when not in use Page 9 10 Laser manual 2014 2014 21 02 5 CLEANING AND MAINTENANCE In ordinary use and normal conditions the guns are maintenance free and thus do not require any daily maintenance except a quick check The cocking lever joint needs to be oiled once a month but do not use the oil excessively one drop is enough If there is too much oil it might cause errors in the electronics In a case of malfunction please contact the manufacturer via email support eko aims com Page 10 10 Laser manual 2014 2014 21 02
Download Pdf Manuals
Related Search