honeywell professional weather station with remote
Contents
1. German French Italian Spanish and Dutch e Sunrise set calculation for over 100 pre programmed world cities in accordance with the geographical information entered by the user e Moon Phase calendar and historical data for the past and future 39 days e Dual crescendo alarms with programmable snooze and pre alarm Weather e Weather forecast for the next 12 to 24 hour in seven large icons Sunny Partly Cloudy Cloudy Light Rain Unstable Weather and Snowy Barometric pressure in imperial or metric units Altitude adjustment for pressure compensation 24 hour barometric pressure history chart Multiple weather alarms including Hi Low temperature Hi daily rainfall Hi wind gust and Hi wind speed alerts Indoor Outdoor Temperature amp Humidity in up to 5 remote locations additional sensors required Dew point and comfort level indicators Wind speed and wind gust averages and memory Wind direction Rainfall amount with minimum and maximum memory UV intensity with daily and weekly highs and lows 200 weather records without PC connection PC software included and USB port Operating range from 100 feet 30 meters up to 328 feet 100 meters Display e Light sensor detects low light conditions and LCD lights up automatically when adapter is connected 15 e Infrared remote control of all display functions Power e AC DC adapter for automatic remote control e 4AA batteries Battery installation e Open the battery compartment door on the back2. power requirements ALWAYS install batteries in the remote weather sensors before the main unit Insert batteries before first use matching the polarity in the battery compartment Remove protective plastic screen from LCD display if any During an initial setup place the main unit close to the remote weather sensors After reception is established all of the remote readings will appear on the main unit s display position the remote sensors and the main unit within the effective transmission range of up to 328 feet 100 meters Ideally they should be placed within the line of sight of the main unit See placement tips in the user manual for each remote weather sensor separately Transmission range may be affected by trees metal structures and electronic appliances The main unit must be placed indoors The effective operating range may be influenced by the surrounding building materials and how the receiver main unit and transmitters weather sensors are positioned Place the remote weather sensors so that they face the main unit receiver minimizing obstructions such as doors walls and furniture Note When the temperature falls below freezing the batteries in the outdoor remote weather sensors may have reduced voltage supply and a shorter effective range We recommend using lithium batteries at temperatures of 32 F 0 C and below IMPORTANT Make sure that the remote weather sensors are easily accessible for cleaning and m
3. be cleaned with a cotton tip or pipe cleaner Never use any abrasive cleaning agents and solvents Do not immerse any units with electronic parts in water or under running water Anemometer Check if the wind vane and wind cups can spin freely and are free from dirt debris and spider webs Rain Gauge Checking and cleaning the rain sensor in a timely manner will maintain an accuracy of the precipitation measurements 40 Troubleshooting Detach the protective screen and lid Clean with soapy water and a damp cloth removing dirt leaves or debris Clean small holes and parts with Q tips or pipe cleaner Watch out for spiders or insects that might have crawled into the funnel Clean the swinging mechanism with a damp cloth Check here before contacting customer service Issue source Symptom Solution Main unit Weather Station US Atomic Time signal is not received Place unit by the window and keep it there at least overnight Main unit Weather The weather readings weather station are The weather data may vary considerably due to different environmental conditions and placement Station different from the TV radio P s gn Check the placement tips included in or official weather reports i i this manual to site your weather sensors in the best possible way Check batteries Check location Caon orae omes Press and hold DOWN V button on sensor the Weather Station control panel
4. e Moon phase e Weather forecast e Current pressure and history bar chart Pressure amd Weather SALE HE uL o M wem POKecdtat Mode 105 p Sea Level Pressure History selection for Altitude Pressure and Moon Phase Moon Phase Weather Forecast History Bar chart for 9 Pressure Temperature ee t pa Se eS E 4 8 Humidity i oS ee ee eee m a eee uA 24 A8 t2 6 2 E O Hw PRESSURE Ouv window Displays e UV index or Minimum Ultraviolet Exposure e Daily Maximum e Weekly Maximum e Remote UV sensor battery status 4 Sensor Battery Exposure Category x A Status tow Me e tov Reading Bar Graph Dur wp s UVI UV Icon o Clock and Alarms Window Displays 22 e US Atomic Time clock and calendar e Single alarm weekday alarm and pre alarm Single Alarm Radio Controlled Og VILI re 4 Battery Status Clock Signal Status uc oi m 7 Weekly Alarm Clock Module icon f nan Time Date Display Weekday City Second Year UTC time Display GsSunrise Sunset Window Displays e Sunrise and sunset times e Longitude and Latitude Sunrise time rt Latitude Temperature and Humidity Window Sunset time Longitude BE it SUNSET Sunrise Sunset Icons Displays e Temperature and humidity readings for indoor and selected channel e Comfort level indication e Dew point temperature e High and Low temperature alerts
5. of the main unit e Insert four 4 AA size batteries according to the polarities shown and replace the battery compartment door e Connect 7 5 V AC DC adapter provided to the main display unit and plug into to the wall power outlet Note The AC DC adapter connection is required for automatic backlight control and a handheld remote control functions If the main unit operates solely on the battery power the auto backlight control and handheld remote control functions will be disabled e When placing the main unit on the table or other horizontal surface unfold the table stand adjusting it to the desired viewing angle e When mounting the main unit on the wall or vertical surface fold the table stand back into the unit and use the mounting hardware provided Placement e Make sure that the main unit is locating within the operating range of all remote weather sensors e Ideally the remote weather sensors should be mounted within the line of sight of the main unit e Transmission range may be affected by trees metal structures and electronic appliances e Test reception before permanently mounting all the remote weather sensors Avoid placing the main unit in the following areas e Direct sunlight and surfaces emitting and radiating heat such as heating ducts or air conditioners e Areas with interference from the wireless devices such as cordless phones radio headsets baby listening devices and electronic appliances Operation Once the m
6. pressure digits are flashing Set the altitude value by pressing the UP or DOWN arrow buttons Press and hold UP or DOWN arrow button for faster digits advancement e Press SET button to confirm your selection Viewing the Sea Level Pressure History e In any mode press HISTORY button entering the sea level pressure display e When the SEA LEVEL is displayed press HISTORY repeatedly viewing the sea level pressure history for the past 24 hours in 1 hour intervals e lfno buttons are pressed for 5 seconds the unit will automatically return to the Pressure and Weather Forecast Mode Viewing Pressure Temperature and Humidity Bar Charts The bar chart in Pressure and Weather Forecast Window can be configured to display a historical data for the sea level pressure and temperature or humidity for channel 1 e Select the Pressure and Weather Forecast Window by pressing UP or DOWN e Press and hold ALARM CHART button or press on the handheld remote control the bar chart will display either sea level pressure with a word PRESSURE displayed at the right bottom corner temperature with a thermometer icon and CH1 and a humidity with RH icon and CH1 Viewing Moon Phase History and Weather Forecast e After selecting the Pressure and Weather Forecast Window press MEMORY so 0 days is flashing e Press UP or DOWN selecting from today s date a future or past days and the corresponding moon phase will be displayed Press and hold eith
7. start transmitting a rainfall data to the main unit 12 Anemometer wind sensor FEATURES e Wind speed wind gust and wind direction measurement e Measures the temperature at the place of anemometer e Remote wind speed wind gust and wind direction data transmission to the main unit via 433 MHz signal e Operating range 100 feet 30 meters e Wall or pole mount A B D A WIND VANE Indicates wind direction B WIND CUPS Measures wind speed C ANEMOMETER BASE e Holds battery compartment e Allows mounting the anemometer vertically D ANEMOMETER ARM Connects battery compartment to the anemometer assembly 13 E WIND CUPS SHAFT Holds wind cups on the anemometer arm F BATTERY COMPARTMENT Holds 2 AA size batteries G WALL MOUNT SCREW OPENINGS Allows securing the anemometer in place H BATTERY COVER Secures battery compartment on the anemometer base Assembly e Slide the wind cups on to the anemometer rotating shaft Do not use force e Insert the longer arm of the Allen Wrench provided into the wind cup set screw opening Feel the head of the set screw inside the wind cups and tighten carefully the set screw securing the wind cups to the rotating shaft e Testto ensure cups are securely fastened to the shaft and cannot be removed Battery installation e Remove four 4 screws from the battery compartment with a small Phillips screwdriver e Open the battery compartment and install 2 AA size alkaline batter
8. the manual programming select the code USR user from the city codes list then you would need to enter all location data longitude latitude time zone and daylight savings time adjustment manually Auto programming e In the Time Window press and hold SET button until the day of week language abbreviation ENG will flash e Press the UP or DOWN button selecting the day of the week in English German French Italian Spanish or Dutch e Press SET button to confirm selection e Select the city code closest to your area by pressing UP or DOWN arrow buttons Refer to P for a list of available codes e Press SET button to confirm the selection and enter the year calendar and time setting e Press the UP or DOWN arrow button selecting the current year date month time format hour and minutes Press SET button every time to confirm each selection and move to the next one Manual Programming e In the Time Window press and hold SET button until the day of week language abbreviation ENG will flash e Press the UP or DOWN arrow button selecting the day of the week in English German French Italian Spanish or Dutch e Press SET button to confirm selection e Select the code USR by pressing UP or DOWN arrow button e Press SET button to confirm selection and enter to the latitude and longitude setting the degrees of latitude will flash e Press UP or DOWN arrow button to adjust the latitude degrees minutes and direction Press and hold eit
9. to Remote sensor search for the signal form the remote anemometer rain gauge or sensor temperature humidity Cannot change the Press RESET after setting the sensor channel channel Cannot change the C to Press RESET after setting C F F and back Initiate manual sensor search Press Data does not match data hold DOWN Y button on the on the main unit Weather Station control panel PRECAUTIONS This product is engineered to give you years of satisfactory service if handled carefully Here are a few precautions 41 Do not immerse the units in water Do not clean the units with abrasive or corrosive materials They may scratch the plastic parts and corrode the electronic circuits Do not subject the product to excessive force shock dust temperature or humidity which may result in malfunctions shorter lifespan damaged batteries and damaged parts Do not tamper with the product s internal components Doing so will invalidate the warranty and may cause damage The product contains no user serviceable parts Use only fresh batteries Do not mix new and old batteries Read the user s manual thoroughly before operating the product 42 Appendix City Codes US and Canadian Cities City Code Zone DST City Code Zone DST Atlanta Ga ATL 5 SU emphis Tenn MEM 6 SU A
10. 0 03 inch 0 6578 mm Accuracy 5 0 03 inch 5 mm 0 6875 Transmitting Interval 183 seconds Hardware Requirement for WeatherCapture PC software Operating System Windows 98 or above 46 Memory size Ram 128 MB or more Hard disk size 100 MB free space or more Optical Device 2 x CD Rom drive Power Main unit 4 x UM 3 or AA 1 5V battery 7 5V AC DC power adaptor 200mA center pin positive Remote Thermo Hygrometer 2 x UM 3 or AA 1 5V battery Remote UV sensor 2 x UM 3 or AA 1 5V battery Remote Anemometer 2 x UM 3 or AA 1 5V battery Remote Rain Gauge 2 x UM 3 or AA 1 5V battery IR Remote Control 2 x UM 4 or AAA 1 5V batteries Battery life alkaline Main unit 2 month Thermo Hygrometer over 12 months UV sensor 2 years Anemometer 2 years Rain Gauge 2 years Weight without batteries Main unit 8 150z 231g Remote Thermo Hygrometer 2 290z 659 Remote UV 2 780z 799 Remote Anemometer 11 1202 315g Remote Rain gauge 10 240z 290g IR Remote Control 3 180z 90g Dimensions Main unit 8 66 L x 6 38 H x 1 38 D inches 220 L x 162 H x 35 D mm Remote Thermo Hygrometer 2 37 L x 4 H x 1 D inches 60 L x 101 H x 25 D mm Remote UV unit 2 58 L x 4 45 H x 2 58 D inches 65 5 L x 113 H x 65 5 D mm Remote Anemometer 19 16 L x 19 16 H x 15 35 D inches 486 6 L x 486 6 H x 390 D mm Remote Rain gauge 6 49 L x 6 89 H x 4 72 D inches 165 L x 175 H x 119 D m
11. CHART button to display the Weekday Alarm W Single Alarm S or Ice Warning Alarm Pre Al time If these alarms are not set the abbreviation OFF will be displayed e To enable or disable any of these alarms press UP or DOWN arrow button Note Press SET button anytime during alarm selection mode to return to the default clock display Programming Alarms e Inthe Time Window press the ALARM CHART button selecting the desired alarm W S or PRE AL e Press and hold ALARM CHART button until the hour digit will flash e Setthe alarm hour using the UP or DOWN arrow button Press and hold either button for quick digit advance e Press ALARM CHART button to confirm selection e Set the alarm minutes using UP or DOWN arrow button Press and hold either button for quick digit advance e Press ALARM CHART button to confirm selection the snooze interval digits will flash e Seta Snooze interval all three alarms share same snooze time duration using UP or DOWN arrow button Press and hold either button for quick digit advance 31 e Press ALARM CHART button to confirm your selection After programming is completed the display will return to the alarm selection screen NOTE Ice Warning Alarm PRE AL cannot be set if weekday alarm W or single alarm S is not enabled Activating or Deactivating Snooze To enable a snooze function press LIGHT SNOOZE button Note Alarm will automatically enter the snooze mode if no buttons are pressed after the ala
12. HONEYWELL PROFESSIONAL WEATHER STATION WITH REMOTE CONTROL TE923W USER MANUAL Table of Contents Introduction Standard Package Contents Installation Before you begin Ultraviolet UV Sensor Remote Thermo Hygrometer Sensor Rain Gauge Anemometer wind sensor Main Unit Battery installation Buttons and Controls Initial Set Up Backlight Connecting Weather Station to a Personal Computer Navigating through the modes Customizing your Weather Station Operations and Window Selection Pressure and Weather Forecast Window UV Window Time Window Manual Settings Sunrise Sunset Window Temperature and Humidity Window Rain Window Wind Window Memory Reset Procedure Maintenance Troubleshooting PRECAUTIONS Appendix City Codes Specifications FCC STATEMENT DECLARATION OF CONFORMITY STANDARD WARRANTY INFORMATION eoo UR tU 11 15 16 18 20 20 20 22 25 25 25 28 29 29 33 35 37 38 40 40 41 41 43 45 47 48 48 Introduction Thank you for selecting the Honeywell Professional Weather Station with Remote control This compact and easy to use product features a wide variety of time and weather data such as precise atomic time perpetual calendar air temperature relative humidity barometric pressure wind speed and direction rainfall UV levels and etc In this package you will find One Main Unit receiver TE923WD One IR Remote Control TS607 One Rain Gauge remote rain sensor transmitter TS906 One Anemome
13. Pa 0 38 mmHg Sampling interval 20 minutes Altitude Compensation Range 657 ft to 16404 ft 200m to 5000 m Temperature Indoor Operating Range 14 2 F to 140 F 9 9 C to 60 C Resolution 0 2 F 0 1 C Accuracy 2 F 1 C Sampling Interval 10 seconds Temperature remote Range 40 F to 176 F 40 C to 80 C Resolution 0 2 F 0 1 C Accuracy 2 F 1 C Transmitting Interval around 47 seconds 45 Humidity Indoor Operating Range 0 to 99 Resolution 196 Accuracy 596 Sampling Interval 10 seconds Humidity Outdoor Operating Range 0 to 99 Resolution 196 Accuracy 596 Sampling Interval 10 seconds Transmitting Interval around 47 seconds Sunrise and Sunset Accuracy 1min latitude within 50 Ultraviolet light Range 0 UVI to 36UVI 15 4 MED hour Resolution 0 1UVI 0 1 MED h Accuracy 1UVI 10 Transmitting Interval 300 seconds Wind Direction Range 0 to 360 Resolution 22 5 Accuracy 11 25 Starting Threshold 3mph 4 8 Km h Transmitting interval 33 seconds Wind Speed Range 0 to 199 9mph 199 9 Km h 173 7 Knots 89 3 m s Resolution 0 1mph 0 16 Km h Accuracy 2mph 5 Starting Threshold 3mph 4 8 Km h Wind Gust Speed Display Update Interval 33 seconds Wind Gust Sampling Interval 11 seconds Rainfall 1h 24h yesterday range 0 to 78 73 inch 0 to 1999 9 mm Last week last month range 0 to 787 3 inch 0 to 19999 mm Resolution
14. RT button to recall a current temperature for the corresponding channel the upper temperature alert with A icon if disabled displays OFF or lower temperature alert with W icon if disabled displays OFF Once the above alerts are displayed press the UP or DOWN arrow button to enable or disable the corresponding alert Programming Alarms e Inthe Temperature and Humidity Window press ALARM CHART button selecting the desired alarm e Press and hold ALARM CHART button until the remote temperature and A or V icon starts flashing e Adjust the temperature digits for the Temperature Alarm using the UP or DOWN arrow button Press and hold either button for fast digits advance e Press the ALARM CHART button to confirm selection and return to the temperature 36 alarm selection screen Viewing Remote Temperature and Humidity Max Min Readings In the Temperature and Humidity Window press the MEMORY button recalling e Current temperature and humidity e Minimum temperature and humidity e Maximum temperature and humidity at the remote location Resetting Remote Temperature and Humidity Memory In the Temperature and Humidity Window press and hold MEMORY button to clear memory for all channels Remote Sensor Status The wave icon above the current channel display shows the connection status of the corresponding remote sensor Icon Status SN ll e Searching for the signals from the remote sensor IN Corresponding remote sensor sig
15. Reset Procedure These steps will completely reset all of the parameters stored in memory e Onthe main unit press and hold SNOOZE and UP buttons for 4 seconds until the backlight will flash e Press SET button clearing the memory the main unit will start beeping with 1 second delay e Wait until the beeping will cease e Disconnect main unit from the AC DC adapter and remove the batteries from the back of the main display unit and wait 10 seconds e Reinstall the batteries and reconnect the main unit to the wall power outlet through the AC DC adapter Maintenance Changing Batteries The battery status of each weather sensor is checked every hour If the low battery indicator lights up replace the batteries in the corresponding unit Changing Batteries in the Main Unit e First connect the AC DC adaptor provided to the main unit to avoid losing any data e Remove the battery compartment door on the back and replace all batteries Do not mix old and new batteries e Replace the battery compartment door Changing Batteries in Remote Weather Sensors e Replace the batteries following the setup instructions for the corresponding sensor e When the batteries are properly installed the remote weather sensor will resume sending signals to the main unit e To enforce an immediate remote signals search press and hold DOWN on the main unit Cleaning The main unit and outer casings of the remote weather sensors can be cleaned with a damp cloth Small parts can
16. ading to the main unit e Flashes twice when battery power is low B BATTERY COMPARTMENT Holds two AA size batteries C RESET Resets all readings requires small paper clip D CHANNEL SWITCH Selects the desired channel from 1 to 5 E WALL MOUNT RECESSED OPENING Keeps the remote sensor on the wall Note Install the batteries and select the channel before mounting the sensor Battery installation e Remove the screws from the battery compartment with a small Phillips screwdriver e Set the channel 1 through 5 The switch is located in the battery compartment Channel 1 is typically selected if only one remote sensor is being used e Install 2 AA size alkaline batteries not included matching the polarities shown in the battery compartment e Replace the battery compartment door and secure the screws e Secure the thermo hygrometer remote sensor in the desired location Mounting e The remote thermo hygrometer sensor can be placed on the flat surface or mounted on the wall in vertical position e Use the wall mount hardware and screws provided when mounting the thermo hygrometer sensor on the wall Placement e The remote thermo hygrometer sensor should be placed in the area with a free air circulation and sheltered from the direct sunlight and an extreme weather conditions e Ideally place the thermo hygrometer sensor above the natural surfaces such as a grassy lawn e Avoid placing the thermo hygrometer sensor near sources of he
17. ain unit is powered the display will show all available LCD segments for 2 seconds IMPORTANT All of the display functions will be locked allowing setting your local altitude and pressure parameters The locked display will show the pressure icon and abbreviation inHg flashing in Pressure Window indoor temperature and humidity readings in Temperature Humidity Window default time in Time Window and a default sunset sunrise time in the Sunrise Sunset Window If pressure and altitude are not configured during this time the Weather Station will self calibrate in a few minutes and show the default settings for the pressure and altitude sea level and then all 16 remote weather sensors readings NOTE When adjusting altitude in feet or meters be noted that the last small digit is not a decimal but a whole number Example 350 feet means 350 feet three hundred fifty feet To set the pressure amp altitude units and program your altitude use the handheld remote control or the main unit control panel mmg nawr Buttons and Controls Most of the handheld remote control buttons are corresponding to the main unit controls To expose the main unit control buttons press the OPEN button on the upper right corner of the main unit and the controls cover door will open Main unit and handheld remote control adequate buttons A UP Selects the next available mode anti clockwise Increases parameters Selects the next a
18. aintenance We recommend cleaning the remote weather sensors periodically as the dirt and debris may affect sensors accuracy Ultraviolet UV Sensor FEATURES Ultraviolet light levels measurement Remote UV levels data transmission to the main unit via 433MHz signal 328 feet 100 meters transmission range Low battery indicator Three different placement options ground stake and wall 6 LED INDICATOR Flashes once when the remote sensor transmits a reading to the main unit Flashes twice when battery power is low B BATTERY COMPARTMENT SCREW Holds battery compartment door in place C U SHAPED SENSOR HOLDER Holds UV sensor in upright position D CURCULAR GROUND STAND Secures sensors in the sensor holder on the flat surface E UV SENSOR LID Covers UV sensor and seals battery compartment F BATTERY COMPARTMENT Holds two AA size batteries G BATTERY COMPARTMENT DOOR Covers two AA size batteries ee p Assembly e Snap the U shaped sensor holder onto the UV sensor unit side grooves e Insert the round end of the U shaped holder into one of the mounting hardware pieces provided Battery installation e Unscrew the lid on top of the UV sensor unit e Remove the screw from the battery compartment door with a small Phillips 7 screwdriver e Insert two 2 AA size 1 5V batteries not included matching the polarities shown in the battery compartment e Replace the battery compartment door and secure the scr
19. arm is disabled the abbreviation OFF will be displayed otherwise the rainfall alarm amount will be shown e When the rainfall alarm amount is displayed press UP to activate or DOWN to deactivate Programming Daily Rainfall Alarm e In the Rain Window press ALARM CHART button to display the rainfall alarm e Press and hold ALARM CHART button until the ALARM HP will flash e Set the desired amount for the rainfall alarm using UP or DOWN arrow buttons Press and hold either button for fast digits advance e Press ALARM CHART button to confirm selection and the unit will return to the rainfall alert display Wind Window Wind direction is shown by compass points i e NW or in bearings starting from north i e 22 59 The unit displays anemometer temperature or wind chill average wind speed over the past 10 minutes gust and wind other information It records the maximum wind speed and gusts collected during the day Wind speed and gust alarms can be programmed based on pre configured limits Wind speed is displayed in km h mph m s or knots Accessing Wind Mode From the main unit Press UP or DOWN until the WIND icon on the display starts flashing From the remote control Press 38 Operating Wind Window In the Wind Window press the SET button to recall e Wind chill temperature with wind direction in bearings e Wind chill temperature with a wind direction in compass points e Temperature at anemometer and wind direction in compass
20. at such as chimneys and heating elements e Avoid any areas collecting and radiating a heat from the sun such as metal brick or concrete structures paving patios and decks e The international standard for the valid air temperature measurements is 4 feet 1 25meters above the ground Operation Immediately after batteries are correctly installed the remote sensor will start transmitting a temperature and humidity data to the main unit 10 Rain Gauge FEATURES e Precipitation measurement e Remote transmission of the rainfall data to the main unit via 433 MHz signal e 100 feet 30 meters transmission range without interference e Built in installation level e Non corrosive protective screen Ss S B E A 4 s C A Rain gauge bucket Contains mechanical components B Knob Secures the top on the rain gauge bucket C Rain gauge bucket feet Secures the rain gauge on its place G D Funnel shaped top with battery compartment Contains battery compartment and rainfall counting electronics E Battery compartment Holds two AA size batteries F Screws 11 Secure battery compartment cover G Built in level with bubble Ensures level rain gauge mounting for proper operation H Bucket see saw mechanism Collects the rainfall in one of its containers and self empties once full l Protective screen Protects the rain gauge funnel from debris Battery installation e Unlock the funnel shaped top on the rain gauge by turning
21. ate and the weekday language Clock and Alarm Window e The location data will determine the time zone and sunrise and sunset times Sunrise amp Sunset Window IMPORTANT If after the initial setup the altitude or other parameters are not displayed or dotted lines are displayed for example you may have to restart the main unit to reset it Note It is a normal unit operation that history chart is constantly moving on the main unit display Backlight The main unit backlight can be turned on off or automatically toggled depending on the environment light conditions Use the light sensor switch at the back of the main unit to select a desired backlight setting For the automatic backlight control the sensitivity of the light sensor can be adjusted to high or low using the switch located on the back panel NOTE For an automatic control function the main unit must be plugged into the wall power outlet via the AC DC adaptor provided Connecting Weather Station to a Personal Computer To collect and manipulate data from your weather station you may connect the main unit to the computer via USB cable Proceed in the following order e Make sure all sensors have batteries installed and the main unit is plugged in to the wall power outlet through the AC DC adapter provided 20 e Insert the CD ROM into available drive and install the software following instructions of the installation wizard e Connect the main unit to the computer USB p
22. both knobs on the sides in an anti clockwise direction e Remove the funnel shaped top lifting it off the rain gauge bucket e Remove 7 small screws from the battery compartment cover using a small Phillips screwdriver e Insert 2 AA size alkaline batteries not included matching the polarities as shown in the battery compartment e Replace the battery compartment door and secure the screws e Insert the funnel shaped top into the rain gauge bucket and secure it into place by turning the knobs clockwise Mounting e Make sure that the rain gauge bucket is level check if the bubble center is inside the built in leveler e Place the protective screen over the top to protect the rain gauge from the debris e Mount the rain gauge in place using mounting hardware e Make sure that the rain gauge is in open area where precipitation falls directly into the gauge s bucket ideally 2 3 feet above the ground Placement e The rain gauge should be placed in an open area away from the walls fences trees and other coverings which may reduce the amount of rain falling into the bucket Additionally trees and rooftops may be sources of pollen and debris e To avoid the rain shadow effects place the rain gauge horizontally on the distance corresponding to two to four times the height of any nearby obstruction e Itis important that excess rain can flow freely away from the rain gauge Operation After batteries are correctly installed the rain gauge will
23. case the SEA LEVEL barometric pressure value can be adjusted according to the local metro area weather information Sources local TV 25 or radio station etc Accessing Pressure and Weather Forecast Window From the main unit Press UP or DOWN until the weather forecast icon 9on the upper left of the display starts flashing From the remote control Press Programming Pressure amp Altitude Parameters During initial power up the weather station won t operate first 2 minutes until the pressure and or altitude parameters are not configured The Pressure and Weather Forecast Window will show the pressure icon and abbreviation inHg flashing If no values are entered within first 2 minutes the unit will self adjust to the default settings inHg inches of Mercury for pressure units and 33 feet for altitude To set the pressure and or altitude units and program the altitude or adjust the sea level pressure during these 2 minutes e Press UP or DOWN arrow button selecting the pressure in inHg inches of mercury hPa hectoPaskal mBar millibars or mmHg millimeters of mercury e Press SET button to confirm and store selection Then unit will advance to the altitude unit selection e Press UP or DOWN arrow button selecting the altitude unit in feet or meters NOTE When adjusting altitude be noted that the last small digit is not a decimal but a whole number Example 350 feet means 350 feet three hundred fifty feet e Pre
24. e Remote Thermo Hygrometer sensor battery status 23 Cycling Display 7 Dew point Tempature Sensor Battery Status Channel Temp Channel Humidity urrr 374 Channel and A F p Ja Reception sa e 15 L L yA Temp Alert T Min Max Display MIN EW COMFORT Comfort Level 17 F E Tempature and Humidity Jl o Mode Icon Q M L 5 l 1 Indoor Temp Indoor Humidity Onain Window Displays e Current amount of precipitation as well as for the last hour last day yesterday last week and last month e Rainfall alert e Remote rain gauge battery status Rain Statisti PU Rain Alert Sensor Battery Status Rain Icon 1 mm 77 Rainfall l 77 Rain Rate Display Owind window Displays Wind Chill temperature Temperature at place of anemometer Wind direction Wind speed Wind gust speed Alert for programmed wind speed and wind gust Remote anemometer battery status 24 Sensor Battery Status o Wind Chill Temperature il F Temp at Wind Sensor WIND CHILL Wind Direction Animate Wind Icon eo m WIN Compass Display Wind Speed Gust a Direction in Compass Max Wind speed Points Bearings Max Gust d Bid gt Wind Alert Gust Alert Customizing your Weather Station To use your station you will have to complete the steps identified under INITIAL SETUP while this section of the manual will provide you with additional operational details and suggestions for custom settings and alar
25. er button for a quick advance 27 e Toexit press MEMORY button Understanding Weather Forecast Icons Display Weather Forecast Rd AY Sunny CY Partly Cloudy c Cloudy LM Light Rain or HeavyRain A Unstable Weather eu Snow EE k Note The weather forecast accuracy is approximately 70 Display shows forecasted not current conditions The SUNNY icon indicates clear weather even when displayed during the night time Understanding the Moon Phase Diagram Od FULL FIRST UV Window 28 The current UV intensity is indicated by the numerical value and more intuitive display by categorizing it into the levels LOW MED HIGH V HIGH and EXTREME It is also represented by a comfort icon that corresponds to different levels The main unit records the daily and weekly maximum UV intensity Values may be displayed in MED h or UVI Accessing UV Window From the main unit Press UP or DOWN until the UV icon on the display will flash From the handheld remote control Press Viewing UV Statistics In UV Mode press the MEMORY button viewing either current UV intensity daily Maximum UV intensity with DAILY MAX displayed or weekly Maximum UV intensity with a WEEKLY MAX displayed Resetting the UV Statistics Memory In UV Mode press and hold MEMORY to reset all UV statistics Setting Units for UV Display MED h or UVI In UV Mode press and hold SET t
26. ew e Screw the UV sensor unit lid back Mounting There are three different options available for mounting the UV sensor ground stand stake and wall mount Ground e Insert the U shaped sensor holder round end into the circular ground stand opening matching 2 round holes in the opening e Secure the sensor in a location with a maximum sun exposure throughout the day e Snap the sharp stake end onto the metal bar and secure with the screws provided e Insert the other end of the metal bar into the U shaped sensor holder and secure with the screws provided e Secure the sensor in a location with a maximum sun exposure throughout the day e Insert the wall mounting end into the metal bar and secure with the screws provided e Snap the other end of the metal bar on to the U shaped sensor holder and secure with the screws provided e Secure the sensor in a location with a maximum sun exposure throughout the day Ground Wall Placement tips The UV sensor should be mounted in the area free of sunlight shadows or reflections from the nearby objects Remote Thermo Hygrometer Sensor FEATURES e Remote data transmission to the main unit via 433 MHz signal 328 feet 100 meters transmission range without interference LCD display of measured temperature and humidity Five 5 transmission channels selection Case can be wall mounted using built in hanger A LED INDICATOR e Flashes once when the remote sensor transmits a re
27. he digits Press and hold either button for fast advance e Press SET button to confirm your selection e Repeat above procedure to set latitude and longitude minutes longitude degrees time zone and DST selection e Once programming is completed the display will return to the Sunrise Sunset Window Viewing Location Data In Sunrise Sunset Window press SET button selecting either e Time and sunrise sunset times e Calendar and sunrise sunset times e Calendar and longitude latitude Viewing Sunrise Sunset Times for Different Dates e n Sunrise Sunset Window press MEMORY button until the date in the Time Window will flash e Press UP or DOWN arrow button selecting the desired date Press and hold either button for fast digits advance e The corresponding sunrise and sunset times will be displayed for the selected date e Press MEMORY or SET button to return display to the Sunrise Sunset Window Understanding of Sunrise Sunset Information The sunrise time displayed in the morning will be different from the one displayed in the afternoon night From 12 am to 12 pm the current day sunrise time will be displayed From 12 pm to 12am the next day sunrise time with the NEXT DAY icon will be displayed At some locations especially with high latitudes sunrise and sunset events may not occur within 24 hours Display Sunrise status Display Sunset status 34 FULL Sunrise for the FULL Sunset on the previous day fol
28. her button for quick digits advance e Press SET button to confirm selection e Continue setting the longitude degrees minutes and direction using the same technique e Press SET button to confirm the selection 0 00 tz will flash prompting to enter the 30 Time Zone setting mode the Time Zone data is provided on P e Set the Time Zone by pressing UP or DOWN arrow button to adjust the time in 30 min intervals Press and hold either button for quick digits advance e Press SET button to confirm selection the DST no will flash prompting to set the Daylight Savings Time option e Press UP arrow button to enable and DOWN to disable the DST option e Press SET button to confirm selection and the year digits will flash e Continue setting the year month day calendar format day month or month day time format 12 or 24 hours local hour and minutes using the same technique After programming is complete the display will return to the default Time Window Note Press and hold SET button anytime during the setup to return to the default Time Window and all previous settings will be cancelled Clock and Calendar Modes In the Time Window press SET button each time selecting either e Hour and Minutes with the Day of the week e Hour and Minutes with the City code e Hour and Minutes with the Seconds e Month with the day and a year e Hour and Minutes for UTC Coordinated Universal Time Activating or deactivating alarms e Press the ALARM
29. ies not included matching the polarities shown e Replace the battery compartment door and secure the screws Aligning e Manually point the wind direction vane to the north use a compass or map if necessary e Press the SET button located inside battery compartment on the shorter side of the rectangle with a paper clip SET button selects a new direction for NORTH and when pressed repeatedly alternates between the factory default NORTH and user selected NORTH e Watch the main display unit Wind Window the next data transmission will show the wind direction arrow pointing to the NORTH e Replace the battery cover and secure the screws Note Repeat this procedure every time when changing the batteries Mounting Mount the anemometer onto a vertical surface using the fittings provided Placement e The anemometer should be mounted in an open area with a free air flow away from the nearby trees buildings or other structures 14 e tis suggested mounting anemometer at 33 feet 10meters above the ground in unobstructed area Main Unit The main unit measures pressure indoor temperature humidity and receives atomic time data from the US Atomic Clock and all remote weather sensors It should be placed indoors FEATURES Time Precise time and date set via RF signals from US Atomic clock 12 or 24 hour time format Manual adjustment of time and date Calendar displaying date with month and day in 6 languages English
30. lation is required between the main unit receiver and the remote weather sensors transmitters The remote weather sensors include a thermo hygrometer temperature and humidity sensor UV ultraviolet sensor anemometer wind sensor and a rain gauge rain sensor All data measured by these remote sensors is transmitted to the main unit wirelessly with the operating range in the open area from 100 feet 30 meters for anemometer and rain gauge and up to 328 feet 100 meters for thermo hygrometer and UV sensors Remote UV sensor anemometer and a rain gauge must be placed outdoors to measure weather elements Remote thermo hygrometer can be placed indoors or outdoors depending on the area where the temperature and humidity are intended to be measured If you intend measuring outdoor temperature and humidity place the remote sensor outdoors NOTE It is critical to assemble and power up all of the remote weather sensors BEFORE setting up the main unit NOTE It is critical to power up and test communication between all of the weather sensors and the main unit BEFORE permanently mounting them outside Before you begin We recommend using alkaline batteries for the remote weather sensors and the main unit when temperatures are above 32 F 0 C We recommend using lithium batteries for the remote weather sensors when temperatures are below 32 F 0 C Avoid using rechargeable batteries Rechargeable batteries cannot maintain correct
31. lowing day or later No sunrise for the No sunset for the whole day whole day Temperature and Humidity Window The weather station supports up to 5 remote thermo hygrometers corresponding to a separate channel of the temperature and relative humidity display The temperature can be displayed in Celsius C or Fahrenheit F The main unit carries the temperature and humidity sensor and uses this indoors data to calculate an indoors comfort level Wet Comfort or Dry The main unit can be programmed to alarm if the temperature exceeds or falls below the pre set upper and lower limits on all remote channels The limits are the same for all remote channels Thermo Hygrometer remote battery status is monitored on the main unit Note The temperature alarms have a 0 5 C deviation to prevent them from sounding due to small temperature fluctuations that are close to the set alarm value This means that after the temperature reaches the alarm temperature it will have to fall below the alarm temperature plus the deviation 0 5 C to activate the alarm Comfort Level Indication The main unit is capable of detecting and displaying the current indoor comfort levels of surrounding environment The comfort level based on the combination of the current indoor temperature and humidity readings The following comfort levels may be displayed COMFORT comfortable WET wet and DRY dry Indicator Temperature Humidi
32. m IR Remote Control 1 61 L x 5 94 H x 0 86 D inch 40 L x 150 H x 22 D mm FCC STATEMENT This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Warning Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment had been tested and found to comply with the limits for a Class B Digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable 47 protection against harmful interference in a residential installation This equipment installed and used in accordance with the instructions may cause harmful interference to radio communications There is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to improve or correct turning the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment to an outlet on a circuit different from that to which the recei
33. ms including e Thetime alarms Clock and Alarm Window e The temperature alerts Temperature and Humidity Window e Daily rainfall alerts Rain Window Operations and Window Selection Pressure and Weather Forecast Window Your weather station is designed to display local barometric pressure sea level pressure weather forecast and moon phases Historical statistics can also be viewed including the sea level pressure for the past 24 hours moon phase for the past and following 39 days and a selectable bar chart for viewing pressure temperature amp humidity history Pressure is displayed inHg English hPa mBar scientific or mmHg metric Altitude is displayed in meters or feet The weather station is designed to measure local pressure and calculate the other two parameters based on the Local Pressure Sea Level Pressure and Altitude are interdependent If you adjust altitude it will calculate sea level pressure if you adjust sea level pressure it will automatically calculate altitude You can only adjust one of the two either sea level barometric pressure or altitude If you wish to know pressure changes at your specific location house the LOCAL barometric pressure should be selected In this case the local altitude elevation must be programmed according to GPS readings Internet etc If you wish to know pressure changes in your surrounding metro area then SEA LEVEL barometric pressure option should be selected In this
34. n Denmark CPH 1 SE Athens Greece ATH 2 SE C rdoba Argentina COR 3 NO Bangkok Thailand BKK 7 NO Dakar Senegal DKR 0 NO 43 Barcelona Spain BCN 1 SE Dublin Ireland DUB 0 SE Beijing China BEJ 8 NO Durban South Africa DUR 2 NO Belgrade Yugoslavia BEG 1 SE Frankfurt Germany FRA 1 SE Berlin Germany BER 1 SE Glasgow Scotland GLA 0 SE Birmingham England BHX 0 SE Guatemala City GUA 6 NO Bogot Colombia BOG 5 NO Hamburg Germany HAM 1 SE Bordeaux France BOD 1 SE Havana Cuba HAV 5 SH Bremen Germany BRE 1 SE Helsinki Finland HEL 2 SE Brisbane Australia BNE 10 NO Hong Kong China HKG 8 NO Brussels Belgium BRU 1 SE Irkutsk Russia IKT 8 SK Bucharest Romania BBU 2 SE Jakarta Indonesia JKT 7 NO Budapest Hungary BUD 1 SE Johannesburg South JNB 2 NO Buenos Aires BUA 3 NO Kingston Jamaica KIN 5 NO Kinshasa Congo FIH 1 NO Oslo Norway OSL 1 SE Kuala Lumpur KUL 8 NO Panama City Panama PTY 5 NO La Paz Bolivia LPB 4 NO Paris France PAR 1 SE Lima Peru LIM 5 NO Perth Australia PER 8 NO Lisbon Portugal LIS 0 SE Prague Czech PRG 1 SE Liverpool England LPL 0 SE Rangoon Myanmar RGN 6 5 NO London England LON 0 SE Reykjav k Iceland RKV 0 NO Lyon France LYO 1 SE Rio de Janeiro Brazil RIO 3 sb adrid Spain MAD 1 SE Rome Italy ROM 1 SE anila Philippines MNL 8 NO Salvador Brazil SSA 3 NO ar
35. nal received successfully No signals received for over 15 minutes All Remote Sensor Signals Search Activation The main unit can be manually activated to search for the signals from all remote sensors Press and hold DOWN button for 5 seconds to enable the search Rain Window The main unit records the total amount of the rainfall for the last hour 24 hours past day past week and the past month The rainfall can be displayed in inches or mm The daily rainfall can be programmed to alarm you if the rainfall exceeds a pre programmed limit Accessing Rain Window From the main unit Press UP or DOWN arrow button until the RAIN icon on the display starts flashing From the remote control Press Viewing Rain Statistics In the Rain Window press either SET or MEMORY button to recall e Current rainfall 37 Rain for the last hour Rain for the last 24 hours Yesterday rain Last week e Last month Tip For the rain rate estimate the Last Hour rainfall value is understood as inch hr or mm hr Programming Rainfall Amount Units In the Rain Window press and hold SET button to program the rainfall units in mm or inches Resetting the Rainfall Statistics Memory In the Rain Window press and hold MEMORY button to reset all rainfall statistics Activating or Deactivating Rain Alarm e Inthe Rain Window press ALARM CHART button to display either the current rainfall or the daily rainfall alarm with ALARM HI displayed e Ifthe rain al
36. nset times depending on the user defined location The location data contains the longitude latitude time zone and DST Daylight Saving Time If the closest city code is selected the main unit will automatically generate all of the correct data for specified location If you cannot find the closest city code or would like to enter your specific location select USR as the city code during the setup Asearch function is also available It allows viewing the sunrise sunset times for different dates Accessing Sunrise Sunset Window From the main unit Press UP or DOWN arrow button until the sunrise and ce M e on the lower left of the display will start flashing From the remote control Press WP Programming Your Location In the Sunrise Sunset Window press and hold SET until the city code in the Time Window will flash entering the location programming mode e Select the city code closest to your area by pressing the UP or DOWN arrow button Refer to P for a list of available codes The corresponding longitude and latitude will be 33 displayed in Sunrise Sunset Window along with the city code e If you wish to enter the geographical coordinates yourself select the USR user as a city code e Press SET button to confirm your selection and enter into the geographical coordinates programming mode the latitude degrees will flash Programming Latitude Longitude Time Zone and DST e Press UP or DOWN arrow button to adjust t
37. o convert units between MED h and UVI Time Window Manual Settings The main unit can be manually set to display the time calendar or UTC time There are three time alarms available on the main unit Weekday alarm W Single alarm S and Ice Warning Alarm Pre Al e f Weekday alarm is activated it will sound at the set time and the alarm icon will flash Mondays through Fridays e f Single day alarm is activated it will sound at the set time and the alarm icon will flash only for this specific day and will not activate on subsequent days e Thelce Warning Alarm is activated at programmed time interval from 15 to 90 minutes before the weekday or single alarm if channel 1 temperature falling to freezing and below Note Ice Warning Alarm can be set only if one or both Weekday or Single alarm are programmed The snooze duration for listed alarms can also be programmed up to 15 minutes Accessing Time Window From the main unit 29 Press UP or DOWN button until the clock icon next to the time date display will flash From the handheld remote control Press button Programming your location IMPORTANT There are two options available for programming a location an auto and manual In you choose auto programming select the closest city code from the codes list programmed in the unit then all necessary location data longitude latitude time zone and daylight savings time adjustment will be set automatically In case of
38. ort using the USB cable provided e Open installed software package double click the icon on the computer desktop You may customize software screen by selecting the weather parameters to be displayed units for these weather parameters location and other user definable elements When determining data transfer interval from the main unit to your computer consider the time duration for each data point For example if you select 5 minutes each point on the graph will be placed every 5 minutes If you will select 3 hours then the graph trend will take at least 24 hours to show 8 data points You can use Print Screen option to create pictures and send them by E Mail and use them on your website If you want to use collected weather data in other applications the software allows storing data on your computer hard drive in text file called RECORDS txt This file can be exported to Excel This file location is C Program Files WeatherCapture NOTE Check our website www honeywellweatherstations com periodically for useful tips and the latest software versions 21 Navigating through the modes The main unit has seven 7 different modes Windows each displaying the separate data category When a specific mode Window is selected the corresponding icon will start flashing Press UP button on the main unit or the handheld remote control to cycle through the modes clockwise or DOWN anti clockwise 9 Pressure and Weather Forecast Window Displays
39. points e Temperature at anemometer and wind direction in bearings Programming Wind Speed Units In the Wind Window press and hold SET button to set the wind speed units in km h mph m s or knots Viewing Wind Statistics In the Wind Window press the MEMORY button to recall e Current wind speed e Daily maximum wind speed with DAILY MAX displayed e Wind gust speed with a GUST displayed e Daily maximum gust speed with a GUST DAILY MAX displayed Resetting Wind Statistics Memory In the Wind Window press and hold MEMORY button to reset all wind statistics Activating or Deactivating Alarms In the Wind Window press ALARM CHART button to recall e Current wind speed e Wind speed alarm with the ALARM HI displayed e Wind gust alarm with the GUST ALARM HI displayed e Daily maximum wind speed with DAILY MAX displayed If the specific alarm is disabled OFF will be displayed otherwise the alarm value will be shown When the wind alarm is displayed press the UP or DOWN arrow button to activate or deactivate it Programming High Wind Alarm e In the Wind Window press ALARM CHART button to select the desired alarm wind speed or wind gust speed e Press and hold ALARM CHART button until speed digit will flash e Set the alarm using the UP or DOWN Press and hold either button for fast digits advance e Press ALARM CHART button to confirm your selection and return to the high wind alarm selection screen 39 Memory
40. re the unit is positioned at 8 feet 2 meters distance from any interference source such as a TV computer monitor microwave etc e Within concrete wall rooms such as basements or office buildings the received signal may be weakened Always place the main unit near the window for better reception Once the atomic time signal is received the date and time will be set automatically and the t icon will appear NOTE At the time of the initial reception allow at least 24 hours for the atomic time receiver to pick up the signal In some cases depending on the location it may take up to 72 hours After the clock is set manually place the main unit by the window for the better reception The atomic clock receiver is programmed that it will continue to search for the atomic time signal daily for every hour between 1 00 am and 4 30 am 32 Once the time signal has been successfully received the time and date will be updated automatically To enable or disable the atomic time receiver e Press and hold UP if atomic time reception is activated a triangular tower icon will start flashing next to the clock icon If reception is disabled the triangular tower icon will disappear Icon Atomic Time Reception Strength p Undefined data N Flashing A Reception failed for 24 hours Nu zi d Weak signal but can be decoded I lo ADE Strong signal Sunrise Sunset Window The main unit is able to calculate the sunrise and su
41. rm sounds for 2 minutes This will occur for a maximum of three times To disable alarm s Press ALARM CHART button entering into a specific alarm mode and press ALARM CHART button again to disable this alarm Note For weekday alarm pressing ALARM CHART button will only disable the alarm for a current day The alarm will activate again on the next day Monday through Friday WWVB RADIO CONTROLLED TIME The NIST National Institute of Standards and Technology radio station WWVB is located in Ft Collins Colorado It transmits an exact time signal continuously throughout the most of the continental United States at 60 KHz frequency The Atomic Time Clock in your weather station can receive this WWVB signal through the internal antenna from up to 2 000 miles away Due to the nature of the Earth s ionosphere reception can be limited during the daylight hours The radio controlled clock will search for an alternate station that receives the atomic time signal from the NIST Atomic clock in Boulder Colorado The WWVB tower icon on the unit s display will flash indicating a radio signal reception from the WWNVB station If the tower icon is not fully lit or if the time and date are not set automatically please consider the following e During night time hours atmospheric disturbances are typically less severe and radio signal reception may improve A single daily reception is sufficient enough to keep the clock accuracy within 1 second e Make su
42. seille France MRS 1 SE Santiago Chile SCL 4 SC Melbourne Australia MEL 10 SA S o Paulo Brazil SPL 3 sb Mexico City Mexico MEX 6 SU Shanghai China SHA 8 NO ilan Italy MIL 1 SE Singapore Singapore SIN 8 NO ontevideo Uruguay MVD 3 SM Sofia Bulgaria SOF 2 SE Moscow Russia MOW 3 SK Stockholm Arlanda ARN 1 SE Munich Germany MUC 1 SE Sydney Australia SYD 10 SA Nairobi Kenya NBO 3 NO Tokyo Japan TKO 9 NO Nanjing Nanking NKG 8 NO Tripoli Libya TRP 2 NO Naples Italy NAP 1 SE Vienna Austria VIE 1 SE New Delhi India DEL 5 5 NO Warsaw Poland WAW 1 SE Odessa Ukraine ODS 2 SE Z rich Switzerland ZRH 1 SE Osaka Japan KIX 9 NO 44 DST Daylight Savings Time definitions SA Australian DST SB South Brazilian DST Changes annually SC Chile DST SE Standard European DST SG Egypt DST SH Havana Cuba DST SI Iraq and Syria DST SK Irkutsk amp Moscow DST SM Montevideo Uruguay DST SN Namibia DST SP Paraguay DST SQ Iran DST maybe changed annually ST Tasmania DST SU Standard American DST SZ New Zealand DST NO DST no Places that do not observe DST ON Always add 1 hour to the local standard time Specifications Radio Frequency 433 MHz RF Reception range 100 328 feet 30 100 m Barometric Pressure Measuring Range 14 75 inHg to 32 44 inHg 500 HPa to 1100HPa 374 5 mmHg to 823 8 mmHg Resolution 0 003 inHg 0 1 HPa 0 08 mmHg Accuracy 0 015 inHg 5 H
43. ss SET button to confirm and store your selection Unit will advance to the altitude programming e Press UP or DOWN arrow button to adjust the altitude value Press and hold either button for the advanced setting e Press SET to confirm the selected altitude value e Wait for about 15 seconds until unit will calculate and display adjusted pressure Viewing the Pressure and Altitude Information To view a pressure or altitude information press SET button selecting the sea level pressure local pressure and local altitude screens Changing or Setting Sea Level Pressure e Press SET button until the local pressure with the word SEA LEVEL is displayed e Press and hold MEMORY button until the pressure unit is flashing inHg mmHg or hPa mBar 26 Set the pressure units by pressing the UP or DOWN arrow buttons Press MEMORY button to confirm your selection Press and hold SET button until the local pressure digits will flash Set the sea level pressure by pressing the UP or DOWN buttons to adjust the pressure value Press and hold UP or DOWN arrow buttons for faster digits advancement e Press SET to confirm your selection Changing or Setting Altitude Press SET button until the local altitude value will be displayed Press and hold MEMORY button until the altitude unit is flashing Feet or Meters Press UP or DOWN arrow buttons to set altitude in feet or meters Press MEMORY button once to confirm your selection Press and hold SET until the
44. ter remote wind sensor transmitter T8805 One UV ultraviolet sensor remote ultraviolet sensor transmitter T5704 One Five Channel Temperature amp Humidity Sensor transmitter TS34C One CD disk with generic PC connection software One USB cable One 7 5V AC DC Adapter Mounting Hardware with Allen Wrench One User Manual Required for installation not included Small Phillips screwdriver Anemometer mounting pole Small paper clip to reset sensors NOTE If any items are missing or damaged please contact Hideki Electronics Customer Service before proceeding with installation Standard Package Contents U Shaped Sensor holder Circular Ground Stand Picture Components Main Unit Remote Control x a AC DC 7 5V power adaptor UV Sensor consists of A Sensor Unit A 9 Stake Base Wall Mounting Base Thermo Hygrometer Sensor Rain Gauge consists of Funnel shaped top with battery compartment Rain Gauge bucket Bucket see saw mechanism Protective screen A Anemometer consists of Wind Cups Wind Vane Anemometer arm Anemometer base WeatherCapture CD ROM PC Software 4 screws for securing rain gauge to the flat surface 4 screws for securing anemometer to vertical Mounting hardware surface 2m 6ft USB cable PC connection cable Installation The Honeywell Professional Weather Station TE923W operates at 433MHz radio frequency so no wire instal
45. this product and its operation please contact our Customer Service 1 866 443 3543 Please direct all returns to the place of the original purchase Should this not be possible contact Hideki Customer Service for assistance and to obtain a Return Merchandise Authorization RMA Returns without a return authorization will be refused Please retain your original receipt as you may be asked to provide a copy for proof of purchase Hideki Electronics Inc reserves the right to repair or replace the product at our option Copyright 2006 Hideki Electronics Inc All Rights Reserved The Honeywell Trademark is used under license from Honeywell Intellectual Properties Inc Honeywell International Inc makes no representations or warranties with respect to this product All user manual contents and information are subject to change 49
46. ty Shows current condition displayed Range Range 20 C to 25 C 40 RH Ideal for both relative COMFORT 68 F to 77 F 70 RH humidity and temperature 5 C to 50 C OVER WET 23 F to122 F 70 RH Contains excess moisture DRY 5 C to 50 C BELOW Contains inadequate 23 F to122 F 40 RH moisture 35 Accessing Temperature and Humidity Mode From the main unit Press UP or DOWN until the IN icon Oon the upper right will flash From the remote control Press Viewing Remote Channel Temperature and Humidity Static Display In Temperature and Humidity Window press the CHANNEL button every time to recall a different channel Channel Auto Scan Display To enable automatic scan of the different channels press and hold CHANNEL button until the O icon is displayed Each valid channel will be alternately displayed with a 5 seconds delay NOTE The channel Auto scan feature can be active only if there are more than one remote sensors operating and are set to different channels Recalling Temperature and Dew Point Information In Temperature and Humidity Window press SET button recalling either e Temperature and relative humidity e Dew point and relative humidity Programming Temperature in Celsius or Fahrenheit In Temperature and Humidity Window press and hold SET button to toggle the temperature in Celsius C or Fahrenheit F Activating Deactivating Alarms In Temperature and Humidity Window press the ALARM CHA
47. umidity Selects the Temperature and Humidity Mode Button Wind Button Selects the Wind Mode UV Button Selects the UV Mode Pressure amp Weather Selects the Pressure and Weather Forecast Mode Forecast Button Rain Button Selects the Rain Mode sunrise Sunset Button Selects the Sunrise Sunset Mode Ociock and Alarm Button Selects the Clock and Alarm Mode Q Button Selects 24 hours History Chart Alternates between Pressure Channel1 Temperature or Channel One Humidity 19 Initial Set Up e Power up each of the remotes as instructed in previous sections e Then power up the main display e Once the main unit is powered the display will briefly show all available LCD segments for a moment e IMPORTANT Do not press any buttons during the set up process which typically takes about 5 10 minutes The display functions will be automatically set including local altitude and pressure parameters The display will show the pressure icon and inHg inches of Mercury flashing You will know that the unit is finished self adjustment when the display shows the default settings for the pressure and altitude sea level indoor outdoor temperature and humidity readings remote sensors readings etc Many settings can be changed or customized to your preference after the display has stabilized e The pressure parameters during Initial Setup See Pressure and Weather Forecast Window e The time the d
48. ustin TX AUS 6 SU iami Fla MIA 5 SU Baltimore Md BWI 5 SU ilwaukee Wis MKE 6 SU Birmingham Ala BHM 6 SU inneapolis Minn MSP 6 SU Boston Mass BOS 5 SU ontreal Que Can YMX 5 SU Calgary Alba Can YYC 7 SU Nashville Tenn BNA 6 SU Chicago IL CGX 6 SU New Orleans La MSY 6 SU Cincinnati Ohio CVG 5 SU New York N Y NYC 5 SU Cleveland Ohio CLE 5 SU Oklahoma City Okla OKC SU Columbus Ohio CMH 5 SU Omaha Neb OMA SU Dallas Tex DAL 6 SU Ottawa Ont Can YOW 5 SU Denver Colo DEN 7 SU Philadelphia Pa PHL 5 SU Detroit Mich DTW 5 SU Phoenix Ariz PHX 7 NO El Paso Tex ELP 7 SU Pittsburgh Pa PIT 5 SU Houston Tex HOU 6 SU Portland Ore PDX 8 SU Indianapolis Ind IND 5 NO San Antonio Tex SAT 6 SU Jacksonville Fla JAX 5 SU San Diego Calif SAN 8 SU Las Vegas Nev LAS 8 SU San Francisco Calif SFO 8 SU Los Angeles Calif LAX 8 SU San Jose Calif SJC 8 SU Seattle Wash SEA 8 SU Vancouver B C Can YVR 8 SU St Louis Mo STL 6 SU Washington D C DCA 5 SU Tampa Fla TPA 5 SU Vancouver Canada VAC 8 SU Toronto Ont Can YTZ 5 SU City Code Time DST City Code Time DST Addis Ababa Ethiopia ADD 3 NO Cairo Egypt CAI 2 sg Adelaide Australia ADL 9 5 SA Calcutta India as CCU 5 5 NO Algiers Algeria ALG 1 NO Cape Town South CPT 2 NO Amsterdam AMS 1 SE Caracas Venezuela CCS 4 NO Ankara Turkey AKR 2 SE Chihuahua Mexico CUU 6 SU Asunci n Paraguay ASU 3 sp Copenhage
49. vailable mode clockwise B DOWN Decreases parameters Recalls all remote sensors signals when depressed and held for 5 seconds Rotates display for current mode C SET lf depressed and held enters into the programming mode or changes parameter s units Confirms set parameters D MEMORY Allows displaying the moon phase UV temperature humidity rainfall and wind memory records E HISTORY Allows displaying the sea level pressure history Allows displaying the time alarms and alerts for the temperature rainfall and wind F G ALARM CHART f depressed and held allows entering into the alarm alert programming mode When depressed and hold in pressure and forecast mode allows viewing of the different bar charts H CHANNEL Changes the temperature and humidity channel Enables the temperature and humidity channel auto scan mode Enables a backlight for 5 seconds I LIGHT SNOOZE Snoozes the alarms 18 Main unit only J OPEN Opens the control buttons panel on main unit K LIGHT SENSOR AUTO ON OFF Toggles the light sensor to automatic on or off setting L SENSITIVITY HIGH LOW Adjusts the light sensor sensitivity M AC DC ADAPTOR INPUT Connects main unit to the power outlet through the AC to 7 5V DC adapter provided N USB Port USB Port provides PC connectivity Handheld remote control only TS607 Selections G Temperature amp H
50. ver is connected e Consult the dealer or an experienced radio TV technician for help DECLARATION OF CONFORMITY We Name Hideki Electronics Inc Address 7865 SW Mohawk Tualatin OR 97062 Telephone No 1 503 612 8395 declare that the product Product No TE923W Product Name Professional Weather Station with Remote Control Manufacturer Hideki Electronics Ltd Address Unit 2304 06 23 F Riley House 88 Lei Muk Road Kwai Chung New Territories Hong Kong is in conformity with Part 15 of the FCC Rules Operation is subject to the following two conditions This device may not cause harmful interference This device must accept any interference received including interference that may cause undesired operation The information above is not to be used as a contact for support or sales Please call our customer service refer to the Standard Warranty Information for all injuries instead STANDARD WARRANTY INFORMATION This product is warranted from manufacturing defects for one year from the date of retail purchase It does not cover damages or wear resulting from accident misuse abuse commercial use or unauthorized adjustment and repair Note that online product registration is required to ensure valid warranty protection To register your product go to our Company website at www honeywellweatherstations com Click 48 Online Product Registration under the Customer Service menu Should you require assistance with
Download Pdf Manuals
Related Search