sunvote wireless base station pvs
Contents
1. please NOTICE A 1 Not put the big bar between base station and voting unit 2 Not put the voting unit on the metal object 3 Not put the metal object near the base station antenna keep up to 0 5meters distance 4 Keep base station and antenna from the other electronic devices such as computer the distance should be up to 0 5 meters 5 Not near to the high frequency wireless interohones the distance should be up to 1 5 meters 6 The antenna should be placed over the 1 meters high table SunVote Professinal Voting Systems PVS 1000W not put the antenna on the ground and higher is better 7 The shorter cable between base station and antenna is better 8 To avoid using the same frequency wireless device near the voting system 9 Commonly Handset wireless transmitter network device and interohone device will not affect the communication between voting unit and base station PVS 1000W use environment A 1 Use temperature 5 40 C 2 Keep temperature 10C 55 C 3 Use humidity 10 90 relative humidity no condensation Please notice the use environment if over the range will cause the damage to the products 3 Basic Operation 3 1 To know the PVS 1000W base station SunVote Professinal Voting Systems PVS 1000W pc 0 bns m 3 indicator lights power port antenna port computer RS232 port RS485 port antenna DC power supply 3 1 1 Indicat2. following 1 Pressing Enter Code Mode in the VoteSetup software the base station enters to code mode SunVote Professinal Voting Systems PVS 1000W 2 Making the keypad enters code mode 3 Checking if keypad connects with base station 4 When connecting keypad with base station click the Write Keypad SysCode in software 5 Try again until setting successfully 6 Making the keypad exit the code mode 7 Clicking the Exit Code Mode the base station exit the code mode 8 After several seconds keypads will show to connect with base station Please refer to the step of keypad code in the User Manual 5 Technology Specification Frequency 433M 868M and 915M can be made Channel number 8 channel 32 channel can be made Data rate 19200bps Communication Exclusive Protocol with the function of Protocol efficacy and bi directional affirmance SunVote Professinal Voting Systems PVS 1000W Using range Normally 120 meters around the base Station Base Station model A single base station 500 more capacity can be designed Base station number BB The most system 4000 more capacity can be designed capacity A single Data 20ms transmission 100 Keypads Approximate 2 seconds 500 Keypads Approximate 10 seconds under the Supports of 1 base station 1000 4000 Approximate 10 seconds under the Keypads Supports of multiple base station Outlook Dimension L 190mm x W
3. 143mm x H 40mm SunVote Professinal Voting Systems PVS 1000W Cover ABS material Acrylonitrile Butadiene Styrene Charge Keeping Box Keeping Box Power Supply Power Supply Outside DC 9V 14V current 500mA Current lt 200mMmA Use Temperature LBC 7 40 Keep Temperature 10C 7 55C Use Humidity 10 90 relative humidity no condensation SunVote Professinal Voting Systems PVS 1000W Certificate 6 Trouble Handles Please refer to the Chapter 3 1 1 Indicator Lights First look at the light of Status and check if the base station connects with the computer Does the light of Data twinkle When voting And can the data be turned in under the condition of far distance data transmission When meeting some special troubles please contact with us the contact information as the following Chapter 8 Please notice the users don t open the base station to repair in private otherwise we will not take charge of the result that the private repair causes One or two keypads Perhaps the power of voting keypad is cannot communicate not enough please charge or change with base station the battery SunVote Professinal Voting Systems Base station receive the data in the close distance but cannot do in the far distance One or two keypads cannot connect with base station completely even if the distance is close One or two keypads communicate not well with Base statio
4. PERF SUNSKY SUNVOTE WIRELESS BASE STATION PVS 1000W USER MANUAL V1 0 CHANGSHA SUNSKY ELECTRONIC DESIGN amp DEVELOPMENT LTD CO SunVote Professinal Voting Systems PVS 1000W CATALOGUE Notice Before USING ass Guia ald eee iy ake whe foe ads un 3 1 AUNT NOM El COE hts ants thn step iMG ast a ine lobed ALIEN ted 4 2 Installation and USIN suit eete ne pce ew neice ds Ge ew oe pinta 5 3 BASIC OPS hat OMe esne cated deo ats bee wa A n PAN on ee 7 3 1 To know the PVS 1O00W base Staon 7 3 1 1 Indicator gntS ee tte eee ese eee 8 Dell 2 Connector DONS sss 9 3 2 How to connect the COmpULerT umeetenaver amen 10 Jo OVI OM a sn el Pie eet cde e a eet a ea e aeaa 12 d Senior Operation 12 4 1 Setting base station number and Channel 12 4 2 Setting System COG Cs cet astsrucaasysttaasnsivtcastias nasaansen bid eapnanenli etait 13 5 Technology SVSCINCAT OR cake sissy srennerets sauce ieee pewares 15 D Trouble Handles 4 wosts sina dtinaeg ahi dre olw shosgnsondth wid ned nbeded a O6idy Moowrdepeene 18 Fas M del GUS eeren erae a 21 Gs SUpporT and Se NW ICSs sasea ny eea R R AE E 22 SunVote Professinal Voting Systems PVS 1000W Notice Before Using Notice A Please read the manual before using Pay attention to the NOTICE mark A and WARNNING mark A and obey the requirement of the manual Only use the whole set of equipment by us not mix ours with the other to use together in order to avoid causing the da
5. Speed PVS 1000W base station supports redundancy technology when using the multiple base stations if one of base stations cannot work will not affect the other base stations working PVS 1000W Channel frequency is 433M be able to make the 868M and 915M frequency or more Supporting 8 channels 8 4 SunVote Professinal Voting Systems PVS 1000W base stations can be used at most 2 Installation and Using PVS wireless voting system connection picture Charge keeping box Projector screen or television C L O Gg O gt Ka 2 Voting Keypads The control computer connects with PVS 1000W base station by RS232 port cable the participants handle the keypads and the voting result is showed on the big screen through projector To assure the enough power of voting unit battery before using low power battery will affect the normal operation Please refer to the Indicator Light and Charging SunVote Professinal Voting Systems PVS 1000W Before starting the meeting please test the whole system by the test function of Sunvote software assure the keypads work well and system codes are the same as the base system codes If using a new system code please change the keypad codes in time especially add the new keypads If not need use multi set of SUNVOTE wireless voting system in a closed range advise not change the system code As the environment affects the data transmission
6. e maybe the other wireless device interferes the system please set a new channel 2 When using multiple base stations together the channel setting must be staggered the same channel base stations will interfere and cannot receive the data message For example using 4 base stations the channel can be set 7 6 5 4 separately 3 Please notice the Using of chapter 2 4 2 Setting System Code The voting keypad system code must be the same as the base station system code otherwise they cannot communicate System code is one integer from 1 65536 the factory system SunVote Professinal Voting Systems PVS 1000W codes of both base station and voting keypad are 48690 generally please not change the factory system codes Changing the system code can prevent the others purchase the same model keypad to vote privately dunes When 2 or more voting systems are used together in the same receiving area if their system codes are same the voting keypad maybe connect the other stations In this case must change the system code dae If change the base station system code must change the keypad system code The user can change and read base station system code in VoteSetUp software Before setting the keypad system code keypad and base station must enter into the code mode return to the factory system code 43690 the keypad system code can be changed after keypad connects with base station step as
7. ion is ok Or the place of antenna is ok Wireless mode of base station is damaged please contact with us The keypad number is wrong please reset it Please check the keypad number in software SunVote Professinal Voting Systems PVS 1000W 7 Model Guider oo PVS 1000W Wireless voting system base station PVS 1000L RS2382 RS485 transition for PVS 1000W PVS WO Series LED wireless voting keypad PVS W1 Series Wireless voting keypad with LCD display PVS W2 Series Wireless voting keypad with LCD specially for multi group evaluation PVS W8 Series 2 4G frequency slim wireless voting keypad DVS H Series Tabletop wire discussion and speaking vote system with LCD display DVS M Series Flush mount wire discussion and speaking vote system with LCD display Please visit our website to know more htto www osunsky com cn SunVote Professinal Voting Systems PVS 1000W 8 Support and Service Service Tel 86 731 5123999 5144999 Email sales psunsky com cn Technology Support Tel 86 731 5123999 5144999 Email tech psunsky com cn
8. mage Please shut off the power before pulling out the connection lines Never place the equipment at the place of high humidity specially not put the water cup on or near the equipment Never use the equipment at the place of high temperature not close the heater please keep the air fluency Never violently strike shake or throw the equipment NOTICE mark A shows that the WARNING mark A shows the operator should pay attention to the operation will cause some damage and operate guide use terms or other items hurt to people or equipment XES and GSUNVOTE brand owner is Changsha Sunsky Electronic Design amp Development Co Ltd 2005 2007 SUNSKY copyright Address Room 1204 Kaihua Build No 308 of Lao Dong Xi Rd ChangSha city Hunan Province China P 0 410015 Tel 86 731 5123999 5149666 Fax 86 731 5144999 Website http www psunsky com cn SunVote Professinal Voting Systems PVS 1000W 1 Introduction PVS 1000W wireless base station is for PVS wireless voting system WOOE W10E W20E PVS 1000W base station unit connects with computer by RS232 port cable and transfers the data message of voting keypad to computer with the wireless data communication technology A single PVS 1000W base station can support 4000 keypads but we advise using less than 500 keypads for thinking of the handling speed When much more keypads are used together adding more base stations can increase the keypads work
9. n base station can receive the data from the close keypads but cannot get from the Tar keypads can PVS 1000W If the all voting keypad appears the same trouble please refer to the Point 3 The keypad battery is low please charge and change Check if the system code is consistent Specially adding the new voting keypad please set up the voting keypad system code Maybe the keypad is damaged please contact with us Perhaps the channel is interfered please set up a new channel Check if the antenna contacts well Or if the antenna is broken If all the channels cannot work maybe the base station is damaged please contact with us SunVote Professinal Voting Systems PVS 1000W When keypads start Please check if the COM port is to vote the base station cannot receive any data and the light of Status on base Station doesn t twinkle fast The software doesn t receive any data but the base station connects well with computer Software cannot receive the data of one keypad but keypad shows the voting indication correct Check if RS232 port cable connects tightly Or pull out RS 232 port cable and insert it again Check if the light of Power on base station is on Try to turn on the power of base station again and re run the software or re start the computer The port of base station is damaged please contact with us Check if the antenna connect
10. na port is the female SMA jack When not using the original antenna please choose suitable frequency bandwidth direction capability and gain 6 Improper Antenna connection will reduce the communication distance RS485 6 Connecting the multiple stations with Ethernet cables 2 R5485 ports chain link The first station is link the computer by the RS232 RS485 transmitter PVS 1000L 3 2 How to connect the computer The steps as following 1 Connecting the antenna tightly to assure the good connection 2 Using the RS232 port cable to connect the base station and computer SunVote Professinal Voting Systems PVS 1000W 3 Connecting the power and base station and then turning on the power 4 When turning on the power the light of Status starts to twinkle 5 The user can turn on the computer power in advance or after connection 6 Running the software test so as to assure the ports Communicate normally notice 1 Please turn off the power of base station before pulling out the cable in order to avoid damaging the system device and computer port 2 If computer doesn t have the COM port the users can buy a USB to RS232 transmitter 3 To assure the cable port must connect with the port software shows otherwise the base station cannot receive the order when voting especially pay attention to the computer with multi RS232 port 4 Please notice USB port place cannot be changed because
11. or Lights SUNVOTE 3 indicator lights Power Status Data Power To show if the power supplies normally Status 1 Before starting to vote when the base station runs normally the light twinkles once every half of second 2 Twinkling once when receiving the order from computer 3 When starting to vote the light twinkles faster If not twinkling please check if the connector port is set correctly or contacts well SunVote Professinal Voting Systems PVS 1000W Data ae 2 Generally the light is not on When start to vote the light twinkles once when receive one data message from keypad 3 1 2 Connector ports L PWR Connecting the DC power supply The outside dimension is 5 5mm and inside hole semi diameter is 2 0mm the inside hole is to connect voltage Power supply DV 9V 15V 6 Current supply 500mA RS232 6 Connecting the PVS 1000W and computer with RS232 port cable The port is DB9 male jack Pcie specification The pin 2 of base station port connects the computer RX pin 3 connects the computer TX pin 5 for connecting ground The both sides of cable are female the inside connector line is pin 2 to pin 2 pin 3 to pin 3 pin 5 to 9 SunVote Professinal Voting Systems PVS 1000W pin 5 the cable length is better less than 12 meters in fact we also uses the 20 meters cables ANT 6 Connecting the antenna Anten
12. the different USB port will lead different COM number The detail using and watching is to use the Windows Device Manager SunVote Professinal Voting Systems PVS 1000W Please refer to the Use Manual for USB port Changing USB port will cause the software COM fault 5 Please assure that the cable connection is not easy to be kicked away or pulled off 6 Please prevent the power supply of base station and computer from breaking it is better to equip the UPS 3 3 Power Off 1 Pulling out the base station power supply 2 Pulling out the cables 4 Senior Operation 4 1 Setting base station number and Channel PVS 1000W base station has 8 RF channels which number is 0 7 please notice the factory base station number is set as G PVS 1000W base station factory number is 1 Please write the different base station number when using the multiple base station For example using 4 base stations the number is written as 1 2 2 A Setting the base station number and channel in the PVS ARS SunVote Professinal Voting Systems PVS 1000W 1 0v software please refer to the PVS ARS 1 0v software manual Also can use the VoteSetUp software after setting the base station number and channel clicking Write Base Ini and later clicking Read Base Ini to read the setting notice 1 If the short distance communicates well between base station and vote but long distance is wors
Download Pdf Manuals
Related Search