SATA Blu-ray/DVD/CD Duplicator Controller User`s Manual
Contents
1. 1 Select Image Allows the selection of the image s present on the HDD The Scroll buttons cycle through the image s on the HDD and the ENT button confirms the selection while the ESC button cancels the selection The image s are listed in order of which na were loaded pi to confirm Disc gt Image Transfers the information from the master CD DVD BD to the HDD After the pane transfer is complete the reader drive is ejected and the source drive is changed to the HDD gt Press gt The source disc loaded to gt HDD as image file A001 gt 16 gt Note The Source Disc may be placed in the Reader Drive or any of the Writer Drives 3 Image Info Shows the image number in sequential order the file name of the image stored on the HDD the type of image stored and the amount of data the image contains in GB for Blu ray MB for DVD or time for CD 3 fA or v me select image and Norki ENTI to display info i p Blu ray disc image of 23 86G as file A004 VR ITA p DVD disc image of 3 875MB as file A001 ri CD disc image of 65 min 28 sec as file A003 4 Rename Image Renames the image instead of using default file names A001 A002 etc Up to 8 characters gt Select the image file to be renamed and press gt gt A or v to select character Press to go to the next position 3 gt Press to gt l confirm gt There are 8 characters for each image name No empty space al2. 3 The current Source Drive will be displayed along with the partial model number of the drive and the port number in brackets 4 Use the Scroll buttons to select from other available drives until the port number of the desired drive is displayed 5 Press the ENT button The desired drive will then become the Source Drive gt Display current Source 9 3 A or y Gel gt Press to finish Setting 9 Track Edit This command allows users to select tracks from multiple audio CDs and burn to target CDs This command also closes edited audio CDs and displays the disc information To create and copy custom compilation audio CDs from multiple master discs Or de a 10 11 Power on the machine if not already on Use the Scroll buttons to select 9 Edit Track Press the ENT button The display will read Edit Track 1 Copy Track Press the ENT button The display will read Waiting Master Disc Insert the first master disc and press the ENT button Once the master disc is successfully read the display will read Waiting Blank Disc Insert blank disc s into writer drive s and press the ENT button The number of tracks on the master CD will be displayed on the lower half of the screen Use the Scroll buttons to select track s to be copied In alphabetical order a lower case letter will be assigned to the tracks selected Once the selection of tracks is finished use the Scroll buttons t
3. Make sure the master disc is finalized in standard ISO format 3 High failure rate a Change the media type Certain types of media may not be compatible with the drives Poor quality media can also cause high failure rate b Lowerthe burn speed and attempt another copy process Lowering the speed increases the stability of the duplication process c Check for available firmware updates for the unit A firmware update may resolve any unspecified issues 4 Machine locks up during the copy process a Hold down the ESC button to abort the copy process The copy process will cancel and menu goes back to the last function executed b If the button cancel does not work power cycle the unit power the unit off leave off for five seconds and power the unit back on c Change the master disc A master disc with error s or a poor quality master disc can cause duplication to lock up at particular points during the copy process 5 Button s do not function on the unit a The duplicator may be busy Buttons pressed while the duplicator is processing will not perform functions unless otherwise specified b Possible faulty button Contact your technical support department for further information 6 One of the drives does not open and or LED does not light up a Check USB and or Firewire port switch and make sure the switch is in the OFF position before machine power is turned on b If a disc is stuck inside a drive insert a paper clip or s
4. and the display will direct back to the Setup sub menu If Enable is selected a password must be entered using the following guidelines Use A or v to select the character desired Press to go to the next position There are a total of 6 positions for the password To enable the password set all 6 positions For space press without choosing a character to leave the position empty Press to cancel the process The duplicator will ask for password when 11 Setup is selected 5 Copy CD TEXT Allows the copying of the CD TEXT on the master disc s to the target disc s TENT PS gt or v to select mode and press to confirm 6 Copy UPC ISRC Allows the copying of the UPC ISRC on the master disc s to the target disc s gt Press gt A or v to select mode and gt press ENT to confirm 7 Copy CD G Allows the copying of CD G files on the master disc s to the target disc s au LS gt A or v to select mode and press ENT to confirm Auto Erase Allows the erasing of files on the rewriteable CD s or DVD s ae eS to confirm 9 Image Fail When image file fails to load into HDD that file can be deleted from HDD 12 HDD Manager This command is for the management of the hard disk drive HDD installed in the duplicator Note This feature is only available on duplicators with a HDD installed If there is no HDD present in the duplicator this feature will NOT show in the menu of commands
5. the desired burn speed and press the ENT button 4 The second speed selection is for audio CDs Use the Scroll buttons to select the desired burn speed and press the ENT button 5 The third speed selection is for DVDs Use the Scroll buttons to select the desired burn speed and press the ENT button Note The selection is only available on DVD duplicators 6 The fourth speed selection is for DVD DL Use the Scroll buttons to select the desired burn speed and press the ENT button Note The selection is only available on DVD duplicators 7 The last speed selection is for Blu ray Use the Scroll buttons to select the desired burn speed and press the ENT button Note The selection is only available on Blu ray duplicators 3 A or y and press to set general data CD burning speed 3 gt A or v and press ENT to set audio CD burning speed 3 20 gt Press ENT or v 3 3 gt A orv and press to set DVD burning speed gt gt A or y and press to set DVD DL burning speed gt gt A orv and press to gt Finish and return set BD burning speed gt to main menu 8 Source Select This command will allow you to change the source drive to any one of the drive s inside the unit including the HDD if installed To change the source drive inside the unit to a different drive 1 Power on the machine if not already on 2 Use the Scroll buttons to select the 8 Select Source Press the ENT button
6. the duplicator is making copies from the master disc to the blank discs As the copies being made the image is also being created and stored in the TEMP directory on the HDD gt Press to exit gt Press Image Manager to confirm gt and go back to main menu gt or V to select 1 Copy gt gt Press gt gt Start copying to gt target disc s and loads image into HDD at the same time gt Ejects copies and in TEMP gt c OFF Disables the load and copy function No temporary image is loaded to the HDD during the copy process gt ENTIt A press O 3 press to exit gt Image Manager and move to select from main menu 19 Basic Tr leshooting Follow these simple steps for quick and proper troubleshooting 1 Powerdoes not turn on or unit receives no power a Check power cord and outlet to make sure power connections are secured b Check voltage switch on the back of the duplicator to make sure power supply is set for correct outlet rating c Testwith another power cord same as a PC power cord to eliminate cable failure 2 Master disc cannot be read a Change the master disc The master disc may be of poor quality or with error s that can make duplication difficult or Impossible b Remake the master disc on another disc Master disc may be of poor quality or with error s that make duplication difficult or impossible c Change the source drive to one of the other drives to test d
7. the original of which copies are made 3 Eject disc tray s of the Writer Drives and place blank disc s on the tray s Number of drives used depends on number of discs to be tested It is not necessary to always use all drives 4 Use the scroll buttons to select the command 2 Test and press the ENT button The drives will automatically close trays and begin the test process 5 Once the test process is complete the disc trays will eject and the display will read Test Result Pass X Fail Y with X being the number of discs that passed the test and Y being the number of failed copies Use discs that have passed the test for the actual duplication 2 Press to load gt Analyze source disc disc and execute Test 3 Copy amp Verify This command will perform the copy process and immediately follow with a verification process on all target discs This command is especially useful for audio CD duplication Finish and eject discs Note The verification process uses a Disc Readability Check to individually check the presence of data on each copy This process does not compare the contents of duplicated discs against that of the master It only verifies that the duplicated discs are readable 6 To start the Copy amp Verify process 1 2 Power on the machine if not already on Eject disc tray of the Source Drive and place the master disc in the designated Source Drive usually the top The mas
8. Copy Process 1 Power on the machine if not already on 2 Eject disc tray of the Source Drive and place the master disc in the designated Source Drive usually the top The master disc is the original of which copies are made 3 Eject disc tray s of the Writer Drives and place blank disc s on the tray s Number of drives used depends on number of copies desired It is not necessary to always use all drives 4 Use the scroll buttons to select the command 1 Copy and press the ENT button The drives will automatically close trays and begin the copy process 5 Once the copy process is completed the disc trays will eject and the display will read Copy Result Pass X Fail Y with X being the number of successful copies and Y being the number of failed copies To reduce copy failure please refer to the troubleshooting section of the manual r gt Press to load ET disc and execute Copy PI gt Analyze master disc e gt Finish discs 2 Test This command will simulate the copy process and make sure all target discs are usable The test process does NOT burn anything to the blank disc s A built in diagnostic algorism is used to verify the chance of successful copy for each target disc To start the Test Process 1 Power on the machine if not already on 2 Eject disc tray of the Source Drive and place the master disc in the designated Source Drive usually the top The master disc is
9. SATA Blu ray DVD CD Duplicator Controller Users Manual TABLE OF CONTENTS Introduction 1 11 Setup 13 12 HDD Manager 16 Operating Environment 1 o Start up Menu 13 o Select Image 16 LCD Front Panel Overview 1 o Auto Start 13 o Disc gt Image 16 Hardware Installation Guide 2 o Display Mode 13 o Image Info 17 Configuration Guidelines 3 o Beep 13 o Rename Image 17 Menu Overview 3 5 o Power on Eject 13 o Delete Image 17 Functions 6 o Reader Speed 14 o HDD Info 18 1 Copy 6 o Compare Speed 14 o Format HDD 18 2 Test 6 o Skip Read Error 14 o Loadand Copy 18 19 3 Copy amp Verify 6 7 o Language 14 Basic Troubleshooting 20 4 Copy amp Compare l o Clear Setup 14 5 Verify 8 o Advance Setup 15 6 Compare 8 o Poweron Time 15 7 Set Burn Speed 9 o CD Overburn 15 8 Source Select 9 10 o Boot Password 15 9 Track Edit 10 11 o Setup Password 15 10 Utility 11 o Copy CD Text 16 o Prescan 11 o Copy UPC ISRC 16 o Quick Erase 11 o Copy CD G 16 o Full Erase 11 o Auto Erase 16 o Eject All Trays 11 o Image Fail 16 o Disc Info 11 o Drive Info 12 o System Info 12 o Update BIOS 12 o Copy Counter 12 Intr ion Thank you for purchasing a SATA CD DVD Blu ray Duplicator Controller This controller is specifically engineered to run a stand alone CD DVD Blu ray duplicator without additional computer or processing unit With a simple four button interface a
10. afety pin in the pinhole underneath the drive door and push gently Make sure the power is OFF during this step Then press the EJECT button of the drive a few times to test the disc tray 7 The blank CD or DVD or Blu ray is not recognized in the writer drive s a Testthe blank disc in another writer drive A faulty writer drive will not recognize blank discs b Change the blank disc to another disc A defective blank disc will not be recognized by the writer drive Copyright 2012 All rights reserved 20
11. ailable ports port 2 16 If a HDD is installed it will connect to port 1 The reader ROM will connect to port 2 and the writers will connect to the following available Configuration Guidelines Next are the basic operation guidelines on how to set SATA devices including optical reader writers and or hard drive The system will automatically detect the drives and assign drive numbers READER WRITER li Drive HDD System Setting Information When machine is turned on the system will detect and assign the READER drive as the Source Drive which will be automatically set as Drive 1 WRITERS will be set as Writer Drives and assigned in sequential order after the READER drive starting from Drive 2 Drive 3 etc When machine is turned on the system will assign the WRITER drive connected to Port 1 of the controller as the Source Drive and as Drive 1 The rest of the WRITERS will then be set as Writer Drives and numbered in sequential order beginning from Drive 2 and on When machine is turned on the system will assign the Hard Disk Drive HDD as the Source Drive and as Drive 1 The WRITERS will then be set as Writer Drives and numbered in sequential order beginning from Drive 2 and on When all drives are installed Port 1 will be connected to Hard Disk Drive HDD Port 2 will be connected to the Source drive WRITERS will be set as Writer Drives and numbered in sequential order from Drive 3 and on Menu Overview B
12. ator before performing the update 10 9 Copy Counter Counts the number of successful and failed copies of CD and DVD made by the duplicator 11 1 Startup Menu Assigns a command to be displayed first after the duplicator has been initialized 11 2 Auto Start Sets auto start time from OFF no auto start to 99 sec Allows the duplicator to automatically start one of six following functions once the master disc and desired number of target disc s are inserted and the drive trays are closed Copy Test Copy amp Verify Copy amp Compare Verify and Compare 11 3 Display Mode Sets the amount of information displayed on the LCD during the performance of various functions 11 4 Beep Enables or disables the audio feedback when buttons are pressed 11 5 Power on Eject Allows the duplicator to eject disc tray s with disc present inside upon boot up 11 6 Reader Speed Sets the speed at which discs are read during various processes Pd 11 7 Compare Speed Sets the speed at which the compare process is executed 11 8 Skip Read Error Enables the option to halt the duplication process if there is an error on the master disc Disables the option to allow the process to continue with the same errors as the master disc Enables or disables the copying of the CD subcode CD TEXT information for audio CDs Enables or disables the copying of the CD subcode UPC ISRC information 11 11 9 Image Fail When image file fails to load into HDD t
13. ck and the current copying status 10 c Once the copy process is completed the LCD screen will display the total number of tracks on target CD s total time used and total time remained d Repeat the track selection and copy process until all desired tracks have been copied to target disc s Proceed with disc closing process Note Once disc closing process is performed no more track s can be added to target CD s 10 Utility This command contains various tools to check functionality of the drive s information of the components and other system information 1 Prescan Prescans the master disc and verifies the integrity and quality of the master disc a Select Utility and press to enter the sub menu b Select 1 Pre scan and press ENT ENT PS gt Finish Prescan gt 2 Quick Erase Performs a quick erase of rewritable RW media for next use Note Do NOT perform this function on recordable R media gt Insert re writable discs and press ENT 3 Full Erase Performs a full erase of rewritable RW media for next use Note Do NOT perform this function with recordable R media gt Insert re writable disc gt Finish Full Erase and press ENT gt and eject discs 4 Eject All Discs Performs a simultaneous ejection of all of the optical disk drive s on the duplicator eee gt Press gt All disc trays will open 5 Disc Info Checks the capacity and space used on the disc s inside of t
14. elow is a quick reference chart of the functions available on all CD DVD BD Duplicator Controllers After the drives are successfully installed user may access the menu functions by powering on the system COPY Copies the master CD DVD BD All contents of the master disc will be duplicated on to all target disc s simultaneously TEST Simulates the copy process but no data is recorded onto the blank disc s Note Test mode can only be done with BD R DVD R and CD R media only COPY amp VERIFY Copies the master CD DVD BD and then verifies the presence of data on the copied disc s to ensure readability of the copied disc s COPY amp COMPARE Copies the master CD DVD BD and then immediately follows the copy process with a bit for bit comparison between the master disc and copied disc s to ensure exact duplication Note The Compare function cannot be used with audio CDs VERIFY a the presence of data on the copied disc s to ensure that the copied disc s can be read back Gi COMPARE Performs a bit for bit comparison between the master disc and copied disc s SET BURN SPEED Allows the speed settings to be changed for various formats SOURCE SELECT Allows the source drive to be changed to any of the available drives in the duplicator including the Hard Disk Drive HDD TRACK EDIT Allows for the selection of individual track s from different master audio CDs to create custom compilation 9 1 Copy Track Allows the selectio
15. hat file can be deleted from HDD 12 HDD MANAGER The management for various functions of the hard disk drive HDD Note For this function and submenu to be displayed a HDD must be installed in the duplicator 12 1 Select Image Selects an image file as a source to be copied to the discs 12 2 Disc gt Image Loads an image to the HDD from a master CD DVD or BD as an Image file 12 3 Image Info Displays the image file information such as image order name file size and type of image 12 4 Rename Image Renames the HDD image partition name up to 8 characters 12 5 Delete Image Deletes an image file in HDD Note If the source file is selected to delete the last file on the HDD will automatically be assigned as a new source file 12 6 HDD Info Displays the information in HDD such as the number of discs stored on the HDD and the amount of space left in the HDD 12 7 Format HDD Formats the HDD erasing ALL data stored on the HDD 12 8 Load amp Copy Allows an image to be loaded onto the HDD from a master CD DVD or BD and automatically copied on to the target disc s Select from 3 modes Synchronous Load First and Off Functions 1 Copy This command will copy the master disc placed in the designated Source Drive to all target discs in the Writer Drives This process burns all information contained on the master disc to the target discs so the copies are exact duplicates of the master disc To Start the
16. he Source Drive and place the master disc to be verified in the designated Source Drive usually the top The master disc is the original of which copies are made Eject disc tray s of the Writer Drives and place copied disc s to be verified on the tray s Number of drives used depends on number of copies to be verified It is not necessary to always use all drives Use the scroll buttons to select the command 5 Verify and press the ENT button The drives will automatically close trays and begin the verify process Once the verify process is complete the trays will eject the discs that have passed the verify process gt Press to gt Analyzing source disc gt load discs gt r gt Finish gt Ga gt Start verification gt a and eject discs 6 Compare This command compares copied disc s to the master disc and ensures that the copies are exact duplicates of the master disc This command is especially useful for BDs DVDs data CDs and video CDs Note The Compare process is a bit by bit comparison between the master disc and the copied discs This operation ensures that all of the copies are completely identical to the Master disc This command is not applicable to audio CDs To start the Compare process please follow the instructions below 1 2 Power on the machine if not already on Eject disc tray of the Source Drive and place the master disc in the designated Source Drive usually t
17. he drive s of the duplicator 11 gt Finish Quick Erase and eject discs 6 Drive Info Checks the make model firmware and the channel port of the drive s that are connected to the duplicator controller 7 System Info Checks the model number buffer memory and firmware version of the duplicator controller 8 Update BIOS Updates the BIOS firmware of the duplicator controller gt Insert update CD gt Update completed and gt Re boot system eject disc gt 9 Copy Counter Tracks the numbers of successful and failed copies made by the duplicator for CDs and DVDs There are three 3 parts of this tool Show Count to display current copy counter Enable Counter to turn the counter on or off and Reset Counter to clear counter gt ea Ee gt Press gt Esse gt Press gt fen gt A or v and press to select choice gt a MM Press to confirm or press to cancel gt Ra gt Press A or M to select different Drives 1 Show Count 2 Enable Count NY Bl 3 Reset Counter 12 11 Setup This command contains options to configure the duplicator system 1 Start up Menu Sets the command to be displayed first when the machine is powered up and initialized All primary commands are available to be set for Start up Copy Test Copy amp Verify Copy amp Compare etc aa e gt Ajor y to select function and press to confirm 2 Auto Start Set the a
18. he top The master disc is the original of which copies are made Eject disc tray s of the Writer Drives and place copied disc s to be compared on the tray s Number of drives used depends on number of copies to be compared It is not necessary to always use all drives Use the scroll buttons to select the command 6 Compare and press the ENT button The drives will automatically close trays and begin the compare process Once the compare process is complete the trays will eject the discs that have passed the compare process gt Press to load discs gt gt Analyzing source disc gt gt Start 2 ee comparison gt Ss disc gt anae 7 Set Burn Speed This feature allows you to set the burn speed of various types of disc CDs data and VCDs audio CDs DVDs dual layer DVDs DVD DL and Blu ray BD R SL BD R DL BD RE SL and BD RE DL Selectable burn speeds CD 1 2 4 8 10 12 16 20 24 32 36 40 default 44 48 52 56 MAX Audio CD 1 2 4 8 10 12 16 20 24 default 32 36 40 44 48 52 56 MAX DVD 1 2 2 4 4 6 8 12 16 default 18 20 MAX DVD DL 1 2 default 2 4 4 6 8 12 16 18 20 MAX Blu ray 1 2 4 6 8 MAX To Set the Burn Speed 1 Poweron the machine if not already on 2 Use the Scroll buttons to select 7 Set Burn Speed Press the ENT button 3 The first speed selection is for general CDs Use the Scroll buttons to select
19. ive and place the master disc in the designated Source Drive usually the top The master disc is the original of which copies are made Eject disc tray s of the Writer Drives and place blank disc s on the tray s Number of drives used depends on number of copies desired It is not necessary to always use all drives Use the scroll buttons to select the 4 Copy amp Compare command and press the ENT button The drives will automatically close trays and begin the copy process Once the copy process is complete the tray s will open briefly and then automatically close again to begin the compare process Once the compare process is completed the trays will automatically eject discs that have passed the Copy amp Compare process gt Analyzing gt Press ENT to i load disc source disc oso Bae gt Copy completed gt Finish and eject discs and start Compare 5 Verify This command verified readability on the master disc and or all target discs This command is especially useful for audio CD duplication Note The verification process uses a Disc Readability Check to individually check the presence of data on each copy This process does not compare the contents of duplicated discs against that of the master It only verifies that the duplicated discs are readable To start the verify process please follow the instructions below 1 2 Power on the machine if not already on Eject disc tray of t
20. lowed in the image file name Press to cancel the process 5 Delete Image Deletes the image s from the HDD and reclaims the space occupied by the image on the HDD gt Press gt Select the image file gt to be deleted gt gt Press gt Delete Image completed ENT gt Repeat to delete more images 6 HDD Info Shows the amount of used and free images available on the HDD in both CD and DVD formats 7 Format HDD Deletes and formats all image s on the HDD restores the HDD to factory defaults and initializes the HDD for use with the duplicator gt Press again to formatting gt gt Press ENT to confirm format gt 8 Load and Copy There are three 3 modes in this function a Load First Completes loading of the image s to the HDD before automatically begins the copy process from the image stored on the HDD to all target disc s Image s are loaded one at a time and copied to the Writer Drives with blank disc s ready The image s are stored in a TEMP partition on the HDD gt A or v to select between OFF Synchronous Load First and press to confirm gt Press to exit gt Press Image Manager to confirm gt and go back to main menu gt Or y to select 1 Copy gt zi 2 gt Loads master disc 100 then start copy gt Complete copying from HDD file to target Ei discs gt 18 b Synchronous Loads the image at the same time while
21. mount of time before the duplicator will automatically start the selected command ranging from OFF no auto start to 99 seconds in 1 second increments 1 2 3 97 98 99 ENN PS gt Ajor v to select seconds and press to confirm 3 Display Mode Changes the display readout during the performance of various commands The Basic mode displays a progress bar along with the amount of total data in MB on the master DVD or in time for the master CD The Expert mode displayed the percentage of the process completed the amount of data transferred and the total amount of data on the master disc ENT PS gt A or v to select mode and press to confirm 4 Beep Turns the audio signal a beeping sound ON or OFF for pressing of the buttons ENT PS gt A or v to select mode and press to confirm 5 Poweron Eject Allows the drive s with disc s present inside to eject the disc trays when the machine is done initializing gt A or y to select Eject All No gt Press ENT gt Eject Eject Target Eject Source and press to confirm 13 6 Reader Speed Sets the reader speed for the duplicator to read the master disc s The speeds for CD are 1 2 4 8 10 12 16 20 24 32 36 40 44 48 52 56 default MAX The speeds for DVD are 1 2 2 4 4 6 8 10 12 16 18 20 default MAX The read speed for BD is pre set to MAX variable upon drive and media speed gt Press gt A or y
22. n of individual track s from the master CD and copies the selected track s onto all target discs 9 2 Close Disc Closes the target discs when all of the track s are burned on to all target discs Note The copied disc s will NOT play back without this step Do NOT skip this step Displays the information regarding the track s on the disc s and how much space is remaining on the target disc s 10 1 Pre scan Performs a scan on the master disc before the copy process starts and ensures the master disc can be copied in the duplicator 10 2 Quick Erase Erases content on the media CD RW DVD RW DVD RW DL and BD RE 10 3 Full Erase Erases all data on the media CD RW DVD RW DVD RW DL and BD RE 10 4 Eject All Trays Ejects all disc trays including source drive 10 5 Disc Info Displays basic information of the discs inserted such as disc type amount of data on disc for master disc s in MB and media book type For blank media displays the media book type available space and speed of the media 10 6 Drive Info Displays information of all drives in the duplicator including the Reader HDD if present and Writer drive s 10 7 System Info Displays the duplicator controller information such as the hardware version buffer memory and currently loaded firmware 10 8 Update BIOS Updates the firmware for the controller Note Please make sure that the firmware is approved by the manufacturer and compatible with the duplic
23. nd a LCD screen to display menu commands and real time status the CD DVD Blu ray Duplicator Controller provides a fast and reliable solution for CD DVD and Blu ray duplication up to 11 targets from one single master disc Operating Environment Working Temperature 0 C 75 C aa Storage Temperature 20 C 85 C Humidity Working Humidity 20 80 Storage Humidity 5 95 LCD Front Panel Overview Scroll Button UP ENT Button ENTER LCD Screen O ESC ESC Button ESCAPE Control Buttons There are 4 control buttons A ENT ESC Scroll Button DOWN A Up Backward To navigate backward in the menu v Down Forward To navigate forward in the menu ENT Enter OK Execute the function ESC Escape Cancel Go back to the previous level in the menu Hardware Installation ide Connect drives with cables provided to the appropriate slot on controller as indicated below Insert 90 Angle Connectors into SATA Writer black Ports Insert 90 Angle Connector into SATA Hard Drive Orange Port Insert 90 Angle Connector into SATA Reader Port Power Connector Insert 180 Angle Connector into SATA Reader Drive Insert 180 Angle Connectors into SATA Writer Drives Insert 180 Angle Connector into SATA Hard Drive ports port 3 16 Note If there is no HDD installed then the reader ROM will connect to port1 and writers will connect to the following av
24. nds in 1 second increments 5 6 7 97 98 99 gt Press gt A or v to select seconds and gt press ENT to confirm 2 CD Overburn Allows the copying of CDs that have been burned over their maximum capacity The target disc s must be the same capacity as the master disc gt Press gt A A or v to select mode and gt press ENT to confirm 3 Boot Password Sets password protection for the duplicator before the boot up process can be started The boot password prevents anyone unauthorized from using the duplicator system gt Press gt A or y to select mode and gt press ENT to confirm If Disable is selected no password will be set and the display will direct back to the Setup sub menu If Enable is selected a password must be entered using the following guidelines Use A or v to select the character desired Press to go to the next position There are a total of 6 positions for the password To enable the password set all 6 positions For space press without choosing a character to leave the position empty Press to cancel the process The duplicator will ask for password when the unit is restarted 4 Setup Password Sets password protection for the duplicator before the setup settings can be altered The setup password prevents unauthorized changes to the system ae eg gt A or v to select mode and press to confirm 15 If Disable is selected no password will be set
25. o select OK at the end of the numeric listing of tracks Press the ENT button The duplicator will begin copying the selected track s to the target CD s Once the copy process is completed the display will read the number of tracks that are currently on the target CD s time used on the target CD s and time left free spaces Press the ENT button The display will now read Edit Track 1 Copy Track If tracks from a different master CD are desired press the ENT button and repeat steps 4 through 8 for each different master CD If selection of tracks is completed proceed to step 10 Use the Scroll buttons to select Edit Track 2 Close Disc Press the ENT button The target disc s will now be finalized and closed for completion Once completed the disc s will be automatically ejected This concludes the Edit Track process p gt Repeat steps for next gt Re to OK and press master or press AJor v and to start burning gt dales sa remo Note A copied audio CD must be closed finalized before it can be played back gt A or V and press ENTIto select tracks gt gt Finish and eject disc a Once all tracks to be copied have been selected press v to select OK on the display Press to confirm and begin the copy process I b Once the track selection is entered the LCD screen will read Copying Audio Tracks and display the track number total time of current tra
26. ter disc is the original of which copies are made Eject disc tray s of the Writer Drives and place blank disc s on the tray s Number of drives used depends on number of copies desired It is not necessary to always use all drives Use the scroll buttons to select the command 3 Copy amp Verify and press the ENT button The drives will automatically close trays and begin the copy process Once the copy process is completed the tray s will open briefly and then automatically close again to begin the verify process Once the verify process is completed the trays will automatically eject discs that have passed the Copy amp Verify process gt Analyzing gt Press to load disc source disc TA gt Finish and eject discs gt Copy completed and start Verify 4 Copy amp Compare This command will perform the copy process and immediately follows with a comparison between the master disc and the copied disc s to ensure the copies are exact duplicates of the master disc This command is especially useful for BDs DVDs data CDs and video CDs Note The Compare process is a bit by bit comparison between the master disc and the copied discs This operation ensures that all of the copies are completely identical to the Master disc This command is not applicable to audio CDs To start the Copy amp Compare process 1 ci Power on the machine if not already on Eject disc tray of the Source Dr
27. to select gt CD Read and press ENT gt 5 gt A or w to select DVD read speed and press ENT to finish 7 Compare Speed Sets the speed at which the master disc is compared with the copies disc s The speeds for CD are 1 2 4 8 10 12 16 20 24 32 36 40 default 44 48 52 56 MAX The speeds for DVD are 1 2 2 4 4 6 8 12 16 default 18 20 MAX The compare speed for BD is pre set to MAX variable upon drive and media speed gt Press gt AJ or v to select CD Compare ENT gt Speed and press ENT ENT gt gt ice ad gt A or y to select DVD Compare speed and press ENT to finish Skip Read Error Allows the duplicator to skip uncorrectable read errors on the master BD DVD or CD This feature can be turned ON or OFF gt Press gt Al or to select mode and gt press ENT to confirm 9 Language Sets the language selection of the display Available languages are English default Spanish Portuguese and Japanese ian PS gt A A or to select language and press ENT to confirm Se 10 Clear Setup Resets the duplicator controller back to factory default settings Press gt Tie creer gt Press ENT to clear all settings 14 11 Advance Setup Functions for advanced users 1 Power On Time Set the amount of time the duplicator controller counts down before initializing the system The default is 15 seconds The time can be set from 5 to 99 seco
Download Pdf Manuals
Related Search