User Manual - Princess Auto
Contents
1. User Manual Wireless Inspection Camera with Color LCD Monitor Version No 1 0 Please read this user Manual carefully before using this product CONTENTS WELCOME a 1 PACKING LIST STRUCTURE ieee 2 INSTALLATIONS 3 GENERAL SAFETY INFORMATION 6 OPERATION EUER RENS 6 SPECIFICATIONS 8 CAUTIONS 9 INFORMATION 8803AJ means GB8803 camera GB7802 monitor WELCOME Thanks you for choosing our inspection video camera and color LCD monitor Please read the User Manual carefully before using this product The product is designed as a remote inspection device It can be used to look into tight spots and beam back real time video to monitor Typical applications might include HVAC inspection automotive inspection cable routing automotive boat aircraft inspection etc PACKING LIST Adapter for Camerax1 LCD Monitor x 1 Monitor x 1 Adapter cable x 1 Bracket optional STRUCTURE Camera Power Indicator Signal Output Flexible Tube Power ON OFF Camera Lens and LEDs Monitor Power Indicator LCD ON OFF Power ON OFF Image Orientation wer Supply E Video Input Brightness Contrast Signal Input INSTALLATION Please install the batteries tube fi2. Exposure to high temperatures can cause the battery to explode so do not dispose of in a fire Place tape overthe terminals to prevent direct contact with other objects Some countries have regulations concerning battery disposal Please follow all applicable regulations The graphics Included are subject to minor change without notice 9 FCC INFORMATION This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference 2 this device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment EU Environmental Protection Waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with your Local Authority or retailer for recycling advice
3. Exterior Supply Voltage BV 24V Consumption Current Max 490mA Video Output Level 0 9 1 3 75 Receiving Sensitivity lt 8548 Dimensions W x D x H 100 x 70 x 30 mm Weight About 140g Operating Temperature 10 C 50 C 14 F 122 F Operating Humidity Max 15 85 RH Actual transmission range may vary according to the weather location interference and building construction All the specifications are subject to minor change without prior notice 4 CAUTIONS The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Turn off the Camera Monitor If the system Is not In use The adapter is used as the disconnect device from the mains The adapter shall remain readily operable The Camera Monitor can only be completely disconnected from the mains by unplug the adapter Donotcutthe DC power cable of the apparatus to fit with another power source Attention should be drawn to the environment aspects of battery disposal Removethe batteries when cleaning the unit Removethe batteries before storing the unit for a long time When necessary REPLACE ALL FOUR BATTERIES In this unit with new ones Use only the size and type of battery specified Be sure to install the battery with the correct polarity as indicated in the battery compartment Properly dispose of the battery
4. a if condensation forms inside the lens Let the water evaporate before using again Operation 1 Roll the ON OFF switch to turn ON the camera and the power indicator will lights The switch then acts as a dimmer for the twin LEDs that surround the camera on the imager head and provide lighting ME gt 28 cs Twin LEDs provide lighting 2 Slide the ON OFF switch to ON position and power Indicator will lights on green the picture display on LCD Adjust brightness contrast orientation and roll the ON OFF switch of the camera for better image effect e Switch acts asadimmer wireless wired The flexible tube can be bent into a certain shape This may help you explore the tube Into narrow areas SPECIFICATIONS Model No 688803 Imaging Sensor CMOS Total Pixels 640x480 Horizontal View Angle 45 degree Transmission Frequency 2468MHz Minimum Illumination 0 Lux 5 Modulation Type FM Bandwidth 18MHz Power Supply 4 x AA batteries Unobstructed Effective Range 10m Tube Diameter 9mm Waterproof Capacity IP67 only for imager head Dimensions WX DXH Flexible Tubo Weight about 450g Model No GB7802 LCD Screen Type 2 36 TFT LCD Effective Pixels 480 240 Video System PAL NTSC 8 Transmission Frequency 2468MHz
5. hen connect the adapter to 8V 24V power the power Indicator will lights on red which Indicates being charging adapter The built in Li battery will be charged after the adapter is plugged in and the Red indicator lights up during charging and will turn off after a full charge Video Input Insert the video cable into the VIDEO IN socket of monitor Insert the other end of the cable into the VIDEO OUT jack of a wired camera The Monitor will receive a high quality video Video Output Insert the video cable Into the VIDEO OUT socket of monitor Insert the other end of the cable into the VIDEO IN jack of a TV or another monitor The LCD Monitor will output a high quality video GENERAL SAFETY INFORMATION WARNING Read and understand all instructions Failure to follow all instructions listed below may result in electric shock fire and or serious personal injury SAVE THESE INSTRUCTIONS Prevent object and liquid entry Never spill liquid of any kind on the video display unit Liquid increases the risk of electrical shock and damage to the product X The unit is not shock resistant Do not use it as a hammer or drop it X Do not immerse the camera and monitor in water Store in a dry place Such measures reduce the risk of electric shock and damage The imager head and the cable are water resistant when the unit is fully assembled but the monitor and camera is not Do not use the camer
6. rst before using the product and choose the accessory according to actual situation Steps of installation as following To Install Batteries 1 Using a screwdriver remove screw and cover 2 Remove battery compartment and insert four new AA batteries into the proper slots In the battery compartment Proper battery orientation is indicated on the battery compartment 3 Reinstall battery compartment and battery cover and screw as before Dry your hands before installation or replacing batteries To Install Camera With Flexible Tube Connect the camera with tube to the body make sure the keyed ends are properly aligned Once they are aligned finger tighten the knurled knob to hold the connection In place 3 Plugged to the socket Fasten the knurled knob To Install Monitor for Wired Use The product also supports wired use by connect the monitor to camera nw Notice Do Not Shake or loose ti 2 im at the lots of both Both sides contact sides make for connection perfectly fit Make sure the sheet N Iron to enter the monitor In the sliding why Slide the monitor D downward Installed S joo aiite successfully To Connect Monitor Power Plug the connect cable into power socket of monitor and plug the end of connect cable into adapter t
Download Pdf Manuals
Related Search