One Touch Can Opener Instructions
Contents
1. the first time SPECIFICATIONS Dimension 125 x 72 x 50 mm Storage temperature 10 to 40 C 50 to 104 F Battery 2 x AA alkaline or rechargeable batteries DKB DIETHELM KELLER BRANDS www onetouchproducts com DKB Household UK Patented and Patent Pending GU14 7UE UK Tel 44 1252 828055 Printed in China E cust serv dkbrands co uk XC69024rev0 Battery Door GETTING STARTED BATTERY INSTALLATION l Slide back the battery door to remove and install 2 AA alkaline or rechargeable batteries intothe battery compartment according to the polarity instruction 2 Replace the battery door after the batteries have been installed 3 Press the Button to reverse the Cutter whenever necessary 4 Always replace all batteries at once and never mix old and new batteries or batteries of different types 5 Take out the batteries if the Can Opener is stored for a long time CAUTION The Cutter may be still operating when replacing the batteries Always keep your fingers away from the Cutter Slide back the bottom cover CULINARE ONE TSUCH USER INSTRUCTIONS OPERATING THE CAN OPENER Place your Can Opener on top of the can with its rim positioned in the groove between the Cutter and the Drive Wheel fig 2 NOTE To open the cans with tab turn them upside down so that the Can Opener can work on the lid without tab 2 With the can on a flat surface press the Bu2. XC69024rev0 User Manual Draft CARE AND MAINTENANCE If the Can Opener slows during cutting this may indicate low battery level and the batteries should be replaced If the Can Opener stops during operation see Trouble Shooting below 2 To clean the Cutter remove the batteries as a safety precaution and remove the Front Cap Wipe the Cutter with a damp cloth or a sponge using a mild non abrasive cleaner followed with a clean dry cloth to dry it completely TROUBLE SHOOTING If the Can Opener is jammed due to low battery level or a deformed can rim press the Button again to activate the reverse function and the Cutter will reset to the start position fig 6 If batteries are depleted the can may not be released by pressing the Button Slide Press th back the Battery Door and replace 2 AA Button again batteries The Can Opener should continue the cutting Press the Button again to reset the Cutter to the start position after cutting is completed Remember to replace the Battery Door after battery replacement Cans with heavy seams and uneven rims may stall the Can Opener If this happens follow above procedure to release the can Start the cutting action just beyond any minor bump or dent in a can NOTE The Can Opener will not open rimless cans or cans with odd corners Can s lid may get stuck at the Cutter after the unit stops You may pull the lid backwards by your hands and the lid will co
3. me free from the Cutter INTRODUCTION Congratulations on your purchase of The Advanced Automatic Can Opener Model No KC86 This incredible product will help you open almost all cans effortlessly The Can Opener is simple to use Place the unit on the can and press the button The Can Opener will cut the can automatically Once the lid comes free from the can press the Button again to reset the Cutter to the start position IMPORTANT SAFETY INSTRUCTIONS o OO s Read all instructions carefully before using your Can Opener Close supervision is necessary when your Can Opener used near children DO NOT open pressurised aerosol type cans DO NOT open cans of flammable liquids such as lighter fluids DO NOT leave the Can Opener unattended DO NOT press the Button when the Front Cap is removed Make sure to press the Button to stop the unit right after the cutting is completed During battery replacement DO NOT press the Button to avoid turning the unit on Before cleaning the Cutter remove batteries to avoid accidentally turning the unit on Avoid contact with the Cutter Keep hands hair jewelry clothing etc away from the Cutter during operation to prevent injury and or damage to the Can Opener DONOT immerse it in water or any other liquids NOT suitable for dishwasher SAVE THESE INSTRUCTIONS This Can Opener is intended for household use only Read the following instructions before using for
4. tton for about one second and release The Can Opener will start cutting the can fig 3 3 When the cutting has completed press the Button immediately to reverse the Cutter fig 4 4 Make sure the Cutter resets to the start position and the motor stops Then lift the Can Opener off the can The Magnet on the Can Opener will pick up the lid as well for convenience fig 5 NOTE There is functional sharp edge on the round Cutter which should be treated with care Fig 5 che 43 lift can opener with lid Auto cutting press to stop
Download Pdf Manuals
Related Search