Catalyst-EC-DevKit-QSG
Contents
1. G EUROTECH DC Power Input J5 Power LEDs Reset Switch SW1 On Off Button SW2 Catalyst EC Development Kit Quick Start CTECX3400 CTEC2400 Serial 2 J16 e Serial 1 J15 N e A R ol USB Sockets J8 J11 _ PS 2 Mouse J21 PS 2 Keyboard J20 Dual Gigabit Ethernet J7 VGA Display J14 See CTEC4000 and CTECX4000 for development kits with an LCD display What s in the Box The development kit includes the following components e Catalyst EC carrier board e Catalyst Module CTEC2400 or Catalyst Module XL CTECX3400 e 12 VDC adapter and AC cord e Power cable Three USB keys loaded with Wind River Linux Windows CE and Windows Embedded Standard USB BIOS recovery key USB UTILIBOOT key Serial port adapter cable for J15 and J16 Maintenance port adapter and black DB9FF cable for connection to J4 only Preparing the Development Kit Your development kit has been designed to work out of the box When handling the system use a wrist strap and or ESD mat Follow these steps to prepare it for use 1 Connect a keyboard and mouse 2 Connect a VGA monitor to VGA display socket J14 3 Connect the power cable to power input header J5 4 Connect the 12 VDC adapter to the power cable Power LED D10 lights when the adapter is connected 110123 4002B Booting the Development Kit Complete these steps to boot your development kit 1 Insert the USB b2. corruption from a reset apply to this type of shutdown Changing BIOS Settings BIOS defaults have been selected to enable the development kit to operate in a standard configuration Complete these steps to change the BIOS settings 1 Remove the OS USB boot drive from the socket 2 Reset the development kit Within a few seconds the BIOS setup utility appears Change the applicable BIOS settings In the Exit tab select Exit Saving Changes Reinsert the OS USB boot drive into the USB socket Reset the development kit ool a Connecting to a Network e Network settings are configured to operate with a DHCP network To connect to your network connect your network cable to either Ethernet socket of J7 e CE beta R2 does not support Ethernet Troubleshooting The following are tips for troubleshooting common problems e Maintenance port J4 is not for application use e The maintenance port adapter cable does not follow the EIA 232C standard If you are directed to use this port when working with Eurotech staff use the black DBYFF cable supplied in this kit See the support forums for additional tips Next Steps For additional information about the Catalyst EC download the following documents from the support site or contact your local sales representative Document Catalyst EC User Manual Catalyst Module Design In Guide 110123 4000 110122 2003 March 2010
3. gin from tty1 ttySO ttyS1 or remotely using ssh The root password is root e To start an X Window session run startx e To shut down enter poweroff at a shell prompt Wait till D8 and D9 turn off before disconnecting power D10 turns off when the adapter is unplugged e This release supports VGA LCD PS 2 keyboard and mouse PATA drive Ethernet USB 2 0 serial ports and RTC It does not support audio and SDIO Features Power LEDs The following LEDs indicate the status of system power Power is connected D10 Primary Supply D9 QOO0G Normal Operating Power D8 Resetting the Development Kit To reset press SW1 Press only if there is a catastrophic fault or hang of the OS User data can be lost and the boot media can be corrupted by an unexpected reset Everyware Software Framework The Catalyst EC is available with the Everyware Software Framework ESF Information about ESF is available at http esf eurotech com Technical Support The Eurotech support site includes errata reports the latest releases of documents and developer s forums These resources are available to registered developers at http support eurotech inc com Catalyst asp 110123 4002B G EUROTECH Shutting Down the Development Kit If the shutdown methods provided by the OS are not available press and hold SW2 for about seven seconds to turn off the system The same cautions about potential file
4. oot drive into any USB socket 2 Momentarily press the On Off button SW2 D8 and D9 light After several seconds the Eurotech logo appears and the operating system OS begins to boot Operating System Details Windows Embedded Standard e Press CTRL ALT DELETE for the login screen e Log in with user name Administrator and no password e You can find the version of your OS in Control Panel System General Support Information e To shut down click Start Shut Down then select Shut Down from the OS menu Wait till the power LEDs D8 and D9 turn off before disconnecting power D10 turns off when the adapter is unplugged Windows CE e The system boots to the Windows CE desktop e CE beta R2 does not reliably support use of USB HID devices including the USB driven touch panel controller Use a PS 2 keyboard or mouse e You can turn off the development kit at any time Avoid doing so while files are being written to disk March 2010 Wind River Linux 3 0 e This release is based on Linux 2 6 27 35 e During startup the system presents a grub menu on the VGA display and accepts input from the keyboard e You can also access grub from serial port J15 if you press a key on the terminal during startup The port settings are 38400 8 bits no parity and 1 stop bit e The kernel console is on ttySO J15 You can change the console to ttyS1 J16 or tty1 VGA display and keyboard from the grub menu e You can lo
Download Pdf Manuals
Related Search
Catalyst EC DevKit QSG