User Manual - Get Dash Cam
Contents
1. button B while in still photo mode will zoom the camera in up to 4x digital zoom Press the down button M to zoom out C Preview mode A film negative icon f will display in the top left of the screen To view video memory card must be inserted After the device is powered on press the OK button to stop recording Press the MODE button twice to enter into Preview mode You can scroll through previews by pressing the UP and DOWN buttons M B In the top right of the display screen the file name is displayed When the file you wish to playback is displayed on screen press the OK button 9 to begin playing the OK button will play and pause the current video To fast forward a video use the DOWN button M up to 8x fast forward speed To rewind a video use the UP button g up to 8x rewind speed N ote When playing a video the video time will display in the top left of the display screen below the file name Note Once a video is playing the menu button becomes inactive Stop the video playback by pressing the mode button and the menu button will reactivate Note If the file displays the lock icon on the top of the screen the current video is locked it can only be deleted by formatting the memory card 3 Settings Menu functions Each of TODC CYCLOPS s three modes has its own settings menu Video Settings Still Settings Playback Settings To access the settings menus from any mode be sure the camera is NOT recordin2. equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help2 Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules Do not make any changes or modifications to the equipment unless otherwise specified in the manual If such changes or modifications should be made you could be required to stop operation of the equipment Canada Industry Canada IC Unintentional emitter per ICES 003 NMB 003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada Le present appareil numerique n emet pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques de Classe B prescrites dans le reglement sur le brouillage radioelectrique edicte par Industrie Canada
3. Em E O R LG NAL DASH CAM ICYCLOPSI Simply The Best Item No 4SK108 User Manual Thank you for choosing The Original Dash Cam This manual offers detailed information on how to operate TODC The Original Dash Cam CYCLOPS including how to operate the device matters that need your attention and technical specifications Please read carefully before use Product description Product structure 1 UP button 4 USB interface 7 OK button 10 Display screen 13 Bracket hole Included with 2 MENU 3 DOWN button 5 Lens 6 Speaker 8 MODE 9 Power button 11 MicroMemory slot 12 IR Night assist 14 Reset hole 15 MIC LES ee ORIGINAL DASH CAM ICYCLOPSI Simply The Best e The Original Dash Cam CYCLOPS e 12v Car Charger e Mini USB Cable e Micro memory card e Suction Cup Windshield Mount e Dash Mounting Disc Operating Your Device 1 Charging A Using the built in rechargeable lithium battery Charging options 1 Connect TODC CYCLOPS to the car charger 2 Connect TODC CYCLOPS to your computer using the USB cable When charging through the car charger the battery display in the bottom right of the screen will flash indicating that the unit is charging A red light will illuminate on the left side of TODC CYCLOPS whenever the camera is charging o Note For first charge a minimum of 6 hours is recommended B TODC CYCLOPS connected to the 12v car charger When the 12v car charger i
4. M 4032x3024 10M 3648x2736 7 5M 3200x2400 5M 2592x1944 3M 2048x1536 Sequence On Off Quality Fine Normal Economy ER Sharpness Strong Normal Soft White balance Auto Daylight Cloudy Tungsten Fluorescent KA Color Color B amp W Sepia ISO Auto 100 200 400 EV Exposure Value 2 0 5 3 4 3 1 0 2 3 1 3 0 0 1 3 2 3 1 0 4 3 5 3 2 0 Anti Shaking On Off Quick Review Off 2 seconds 5 seconds Date Stamp Off Date Date and Time Note When sequence is turned On one press of the OK button will take a sequence of five pictures Note When turned on quick review allows you to quickly review the picture you have just taken for the chosen amount of time Playback Settings itj Delete Delete Current Delete all Protect Lock Current Unlock Current Lock All Unlock All Note Choosing Delete Current will delete the file that was on screen when entering the playback settings menu Choosing Delete all will delete all unlocked files on the memory card Note Locked videos cannot be deleted until they are unlocked with one exception formatting the memory card will erase all files on the memory card including locked videos Setup Menu In addition to the mode settings pages from any mode you can access the Setup Menu by pressing the MENU button twice camera must NOT be recording to access menus re
5. Set Date Time Using the UP and DOWN buttons M set the correct time and date O Auto Power Off Off 2 Minutes 5 Minutes 10 Minutes Language English French German Italian Spanish Simplified Chinese Traditional Chinese Japanese Russian Korean Ts Light Frequency 50 Hz 60 Hz Set to 60 Hz for North America Be Screen Saver 3 Minute 5 Minutes 10 Minutes Off Image Rotate On Off Flips the screen for recording on windshield or dashboard Format Cancel OK Default Setting Cancel OK Resets your CYCLOPS to factory default settings Firmware Version Displays the software version number Note Use the OK button to navigate between month day year and time Once the correct time and date are displayed press the MENU button lll to activate Note When screen saver is on TODC CYCLOPS s display screen will shut off after the chosen time of inactivity 3 5 10 minutes TODC CYCLOPS will continue recording To turn the screen back on simply press any button Note CAUTION performing a format of the memory card will erase ALL data on the card included locked files WARNING THIS DEVICE SHOULD NOT BE ADJUSTED BY THE DRIVER WHILE DRIVING IN THE EVENT OF AN ACCIDENT DEVICE MAY DISLODGE AND BECOME UNSAFE FOR PASSENGERS Notice 1 Please insert memory card before recording 2 TODC CYCLOPS supports memory cards up to 32GB 3 Please attach unit by applying firm pressure to m
6. g To enter Video settings press the MENU button Il from video mode To access Still settings navigate to Still Photo mode and press the MENU button EE To access Playback settings navigate to Playback mode and press the MENU button E Navigate the menus by using the UP and DOWN buttons M E choose the highlighted setting by pressing OK a Video Settings Resolution 1O80FHD 1920x1080 720P 1280x720 WVGA 848x480 VGA 640x480 QVGA 320x240 Loop Recording Off 1 Minute 2 Minutes 3 Minutes EV Exposure Value 2 0 5 3 4 3 1 2 3 1 3 0 1 3 2 3 1 0 4 3 5 3 2 0 Motion Detection On Off Audio On Off Date Stamp On Off KaG Sensor 2G 4G 8G Off Button Sound On Off Higher resolution has higher picture quality but also takes more memory to store files When this option is turned on the camera will record in for example 3 minute video clips when the memory card is full the camera will then overwrite the oldest video file and store the newest allowing you to continue recording while never having to change the memory card x TODC CYCLOPS s G Sensor Gravity Sensor locks and stores video on sudden impact so it will not be overwritten by the camera s loop recording function This menu setting adjusts the sensitivity of this sensor with 2G being the most sensitive and 8G being the least Still Settings 2 Timer Single 2s Timer 5s Timer 10s Timer Resolution 12
7. g the power button your video will be stored Note Pressing the OK button in video mode starts and stops recording Note Pressing the mode button while TODC CYCLOPS is recording will lock and store the current video the top of the screen will display this lock key icon EES This video will not be overwritten until the memory card is formatted Note A quick press less than one second of the power button Mi while recording changes TODC CYCLOPS from day mode to night mode the following icon will display on the top of the display screen when in night mode Note Pressing the up button B while recording will zoom the camera in up to 4x digital zoom Press the down button M to zoom out Note The menu button has no function while the camera is recording B Still Photo mode A still photo camera icon will appear in the top left of the screen el Memory card must be inserted After the device is powered on press the OK button to stop recording Once recording has been stopped press the mode button once to enter still photo mode TODC CYCLOPS cannot change modes while the camera 1s recording Note To capture a photo in still photo mode press the OK button Note A quick press less than one second of the power button li while in still photo mode changes TODC CYCLOPS from day mode to night mode the following icon will display on the top of the display screen when in night mode Note Pressing the up
8. ount before mounting on surface 4 When the lithium battery is depleted TODC CYCLOPS screen shows Batteries depleted The camera will shut down automatically after 20 seconds and save the files automatically 5 If you need to reset TODC CYCLOPS press the RESET button for 3 seconds 6 For questions or technical support visit 4Sight at www GetDashCam com FCC STATEMENT FCC declaration of conformity Responsible party ASight Inc 12285 Colony Ave Chino CA 91710 714 988 5838 Fax 714 285 5828 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Note This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the
9. s plugged into your vehicle s 12v outlet and TODC CYCLOPS is connected after starting the vehicle the device automatically turns on and enters video mode it will begin to record The device will continue recording while charging When the vehicle is turned off the device keeps working and will turn off five seconds later saving the recorded files automatically 1f your vehicle s 12v outlet stays active when the car is turned off it is recommended to unplug your TODC CYCLOPS before leaving your car Alternatively you can choose to turn the camera off using the power button 2 the files will be automatically saved Note TODC CYCLOPS is designed to be plugged in continually while driving leaving the unit plugged in for long periods of time will not harm the camera 2 Functions introduction This camera has three modes Video mode Still Photo mode Playback mode To switch between modes when the camera is NOT recording press the MODE button A Video mode a video camcorder icon will display in the top left of the screen wa Memory card must be inserted After pressing and holding the power button or connecting TODC CYCLOPS to the car charger the camera turns on and enters video mode TODC CYCLOPS will automatically begin recording To stop recording press the OK button To turn off the device press and hold the power button Whether you stop recording using the OK button or you simply power down TODC CYCLOPS usin
Download Pdf Manuals
Related Search