HUAWEI E220 HSDPA USB Modem. HUAWEI E220
Contents
1. Icons and Shortcut Keys The following table lists the icons and corresponding shortcut keys of Connect Icon Shortcut Key Description g Connect to Disconnect from the network 3 Launch the IE F3 amp Display the SMS interface F5 Display the Contacts interface F6 5 WES Status Information The status information shown on the right panel varies with the ongoing service The following two tables list the status information and description When the screen is in the minimized status Status Information Description Signal The network type and signal strength The more the bars are the stronger the signal strength is Network Service provider information Duration The duration of the current data connection Volume The volume of the current data connection When the screen is in the maximized status Status Information Description Signal The network type and the signal strength Network Service provider information Connection The current connection information e Duration e Volume e Sent volume received volume rate and the top rate New messages The number of new messages If there is a new message the number blinks New SMS reports The number of new message reports If there is a new message report the number blinks Menus 1 File 1 1 Connect Disconnect 1 2 Import Contacts 1 2 1 From File 1 2 2 From USIM SIM Card 1 32. code is supplied with the USIM SIM card You can change your PIN code Also you can set whether to enter the PIN code when E220 starts up Modifying the PIN Code You can modify the PIN code Do the following Step Operation 1 Select Settings gt Modify PIN Code 2 Enter the current PIN code and the new PIN code and then enter the new code again to confirm it 3 Click OK Validating the PIN Code After launching Connect you can still use the PIN code validation function Do the following Step Operation 1 Select Settings gt PIN Code Protection 2 Select Validate to enable the PIN code validation function For details refer to the descriptions on page 5 PIN Code Protection You can enable or disable the PIN code when the E220 starts up Step Operation 1 Select Settings gt PIN Code Protection NEEDS Step Operation 2 Select Enable or Disable Enter the PIN code e Enable You need to enter the PIN code when E220 starts up e Disable You do not need to enter the PIN code when E220 starts up System Settings The system settings include the startup mode of Connect the alert mode for messages and the standby hibernate mode of the PC and so on Select Settings Options Setting Startup Click the Startup tab to set the following items Option Description Launch application Connect is launched along with the Windows on Windows start up Start main window The Connect window is
3. Division Multiple Access Windows Internet Name Service Ver VIOOROOI 01
4. E2 26 dBm 3 Item Description Services Data service e GSM CS UL 9 6 kbit s DL 9 6 kbit s e GPRS UL 26 8 kbit s DL 53 6 kbit s e EDGE UL 118 4 kbit s DL 236 8 kbit s e WCDMA CS UL 64 kbit s DL 64 kbit s e WCDMA PS UL 384 kbit s DL 384 kbit s e ULWCDMA DL HSDPA UL 384 kbit s DL 3 6 Mbit s SMS service GSM GPRS WCDMA HSDPA EDGE Dimensions 89 37 mm x 42 61 mm x 14 50 mm D x W x H Weight About 50 g Power supply Through two USB interfaces method Operating 10 C to 55 C temperature Storage temperature 40 C to 70 C os 11 raas How to judge whether E220 is correctly connected to the PC After you connect E220 to the PC two device icons are displayed in the device manager namely HUAWEI Connect 3G Modem and HUAWEI Mobile Conncet 3G PC UI Interface If a yellow exclamatory mark or other signs are displayed in front of the icons it indicates that E220 is not correctly connected You need to connect E220 again What to do if E220 fails to connect to the Internet 1 Make sure that E220 is in the service area and the network signal is normal 2 Make sure you have subscribed to the wireless access service For details consult your service provider 3 If you have subscribed to the wireless access service refer to Internet Service to configure the network settings Only part of the message is displayed after use the Paste function to edit it Why
5. Export Contacts 1 3 1 To File 1 3 2 To USIM SIM Card 1 4 Import Message from USIM SIM Card 1 5 Exit 2 Tools 2 1 Open Browser 2 2 SMS 2 3 Contacts 2 4 Volume Statistic 2 5 Diagnostics 3 Settings 3 1 Choose network 3 1 1 Auto 3 1 2 Manual 3 2 Choose connection type HUAWEI 3 2 1 GPRS Preferred 3 2 2 3G Preferred 3 2 3 GPRS Only 3 2 4 3G Only 3 3 Band Selection 3 3 1 Band 3 3 2 GSM900 1800 WCDMA2100 3 3 3 GSM1900 3 4 Modify PIN code 3 5 PIN Code Protection 3 5 Validate 3 5 2 Enable 3 5 3 Disable 3 6 Options 3 7 SMS Settings 3 8 Network Connection Settings 4 Help 4 1 HUAWEI Online Support 4 2 About Internet Service Network Connection Settings Creating a Profile Select Settings gt Network Connection Settings Then do the following Step Procedure 1 Click New 2 Enter the profile name 3 Enter the APN IP authentication DNS WINS and authentication protocol 4 Click Save Note For details of network connection settings consult your service provider Deleting a Profile Select Settings gt Network Connection Settings Then do the following Step Operation 1 In the Choose Profile Name field select the profile 2 Click Remove gt OK 0 ove Modifying a Profile Select Settings gt Network Connection Settings Then do the following Step Operation 1 In the Choose Profile Name field select the profile 2 Click Modify 3 Modify the profile 4 Click
6. Save Accessing the Internet You can access the Internet through a 3G or GPRS connection Select Settings gt Network Connection Settings Then do the following Step Operation 1 In the Choose Profile Name field select the profile and click OK 2 Em Click to establish the 3G connection or the GPRS connection 3 After a prompt is displayed indicating that the connection is established click or launch the browser of the operating system Then you can access the Internet 4 Click d to disconnect the connection When the connection is established details of the network connection are displayed as follows e The current connection duration e The data volume of the current connection e The volume rate and the top rate of the sent and received data Volume Statistic You can view the details of the volume statistic Select Tools gt Volume Statistic to view e Last Volume Statistic the volume of the last connection including the sent volume the received volume and the duration e Total Volume Statistic the volume of all connections including the sent volume the received volume and the duration e Last Reset Time the last reset time e Reset Click it to reset Note e The volume statistic is for your reference only e If you do not perform the reset operation the last reset time is null SMS Sending or Receiving a Message Creating a Message Click Q or select Tools gt SMS
7. file 3 Select the path and enter the file name 4 Click Save Message Import Management You can import messages to Connect from the USIM SIM card Step Operation 1 Select File gt Import Message from USIM SIM Card 2 Messages are imported to the Inbox Outbox or Draft of Connect respectively SMS Settings Select Settings gt SMS Settings and the SMS settings interface 1s displayed Option Description Reports You can enable or disable this function With the function enabled if you send a message successfully you can receive a delivery report Use same Set the recipient to use the same SMS center number to reply SMS centre the message for reply VL HUAWEI Option Description SMS Bearer Set the bearer domain of sending a message Domain e Circuit Switched CS messages are sent through the CS domain e Packet Switched PS messages are sent through the PS domain Validity Set the validity period for a message saved in the SMS center SMC Number The SMS center number is supplied with the USIM SIM card After you insert the USIM SIM card the field is auto filled If the field is null or you delete the number unconsciously contact your service provider to retrieve the number Note If there is no capacity for delivery reports in the USIM SIM card the request status report function is invalid contact your service provider for details gt Contacts Connect can save up to 1
8. hibernate Diagnostic You can inquire E220 and the USIM SIM card Select Tools gt Diagnostics Messages in USIM SIM Card The format is XX Y Y XX indicates the number of messages and YY indicates the capacity of the USIM SIM card Contacts in USIM SIM Card The format is XX YY XX indicates the number of contacts and YY indicates the capacity of the USIM SIM card IMEI Number the IMEI number of E220 API Version the API version Firmware Version the board software version of E220 Hardware Version the hardware version of E220 10 Item Specifications Description Technical standard 3GPP R5 USB interface standard USB2 0 full speed standard Radio system e GSM GPRS EDGE 900 MHz 1800 MHz 1900 MHz e HSDPA WCDMA 2100 MHz Radio frequency band GSM GPRS EDGE 900 MHz e UL 880 MHz 915 MHz e DL 925 MHz 960 MHz GSM GPRS EDGE 1800 MHz e UL 1710 MBz 1785 MHz e DL 1805 MBz 1880 MHz GSM GPRS EDGE 1900 MHz e UL 1850 MBz 1910 MHz e DL 1930 MBz 1990 MHz HSDPA WCDMA 2100 MHz e UL 1920 MBz 1980 MHz e DL 2110 MHz 2170 MHz Radio power output e HSDPA WCDMA 2100 MHz Power Class 3 24 dBm 1 3 GSM GPRS 900 MHz Power Class 4 33 dBm 2 GSM GPRS 1800 MHz Power Class 1 30 dBm 2 GSM GPRS 1900 MHz Power Class 1 30 dBm2 EDGE 900 MHz Power Class E2 27 dBm 3 EDGE 1800 MHz Power Class E2 26 dBm 3 EDGE 1900 MHz Power Class
9. in aircraft The wireless device may cause interference to control signals of the aircraft Switch off your wireless device near high precision electronic devices The wireless device may affect the performance of these devices NJ EHD Do not attempt to disassemble your wireless device or its accessories Only the qualified personnel are allowed to service or repair the wireless device Do not place your wireless device and its accessories in containers with strong electromagnetic field Do not place magnetic storage media near your wireless device Radiation from the wireless device may erase the information stored on them Do not put your wireless device in a high temperature place or use it in a place with flammable gas such as a gas station Keep your wireless device and its accessories away from children Do not allow children to use your wireless device without guidance im ED DS Observe any laws or regulations on the use of wireless device Respect others privacy and legal rights when using your wireless device Table of Contents EOVST VIEW UNE EC EE 1 2PA CKN E 2 TAVAS AE A RUMORES 3 Getting to Know Your E220 t anite Acta em nee ten 3 Indicator iib ge db a eee esq ee 3 Computer Configuration Requirements eese 4 Zintroductionsto Connectbee TU EE 5 Launching Connect 3 ce Bed t d mee Odes 5 Introductio
10. the SMS interface is displayed Step Operation 1 2 Click Write and the Write interface is displayed Enter the phone number by one of the following ways Enter the phone number In the Contacts field enter the phone number and use the semicolon to separate phone numbers Select the contact Click Contacts Select one or more contacts and click OK In the pop up dialog box select the phone numbers and click OK To select several contacts select the Apply to all items check box to simplify the procedures Write the message On the upper right corner of the interface the number of remaining characters and the number of the message is split are displayed Click Send to send the message After the message is sent it is auto saved to the Outbox If the sending fails a prompt is displayed asking whether to send it again If you cancel the sending the message is auto saved to the Outbox Click Save to save the message to the Draft Click Clear to clear the phone number and the message C Note e To select several contacts press and hold the Shift key or the Ctrl key e Connect supports the group sending function You can send a message to up to 20 phone numbers e Each message can contain 70 Chinese characters or 160 English letters If a message contains more than 70 Chinese characters or 160 English letters it is split into several messages and sent one by one e You can follow the above mentioned two ways to
11. 000 contacts You can create modify or delete contacts You can send a message or make a call to the contact You can also import or export contacts Managing Contacts Click g or select Tools gt Contacts The Contacts interface is displayed Creating a Contact Do the following Step Operation 1 Click New 2 Enter the content in the Name Mobile Number Home Number Office Number E mail and or Comments fields 3 Click Save Modifying a Contact Do the following Step Operation 1 Select or double click the contact and click Edit 2 Modify the contact ZR Step Operation 3 Click Save Deleting a Contact Do the following Step Operation 1 Select one or more contacts Then click Delete 2 Click OK Sending a Message You can send a message to a contact Do the following Step Operation 1 Select one or more contacts 2 Click Send Connect retrieves the phone number and the Write interface is displayed 3 The phone number is displayed in the Contacts field Write the message and click Send Searching for a Contact You can search for a contact Do the following Step Operation 1 Click Search EP 2 e Select a field item such as Name Mobile Family Office E mail from the dropdown list in the Condition area e Enter the content in the Value text box e Select Match Whole Word Only and or Match Case in the Matching Type field 3 Click Search Now to start sea
12. A text message can contain up to 1 000 characters If the size of the pasted part exceeds the limit the exceeding part is auto deleted When there is a new message no alert window is displayed Why Make sure that you have enabled the alert window function Select Settings Options Then select the Prompt tab and select the Display alerts when a message is received check box in Message Alerts Settings After Connect is launched the system prompts There are some unread messages in USIM SIM card Do you want to import them to the computer After select No what if want to import the message Select File gt Import Message from USIM SIM Card to import messages to Connect from the USIM SIM card cannot paste the phone number Why Only 0123456789 is valid Make sure that all digits of the phone number are valid cuc dE 12 CPU CS DL DNS EDGE GPRS GSM HSDPA P PS os Acronyms and Abbreviations Access Point Name Central Processing Unit Circuit Switched Downlink Domain Name Server Enhanced Data rates for Global Evolution General Packet Radio Service Global System for Mobile communications High Speed Downlink Packet Access Packet Switched PIN PUK SIM UL USB USIM WCDMA WINS Personal Identification Number PIN Unblocking Key Subscriber Identity Module Uplink Universal Serial Bus User Service Identity Module Wideband Code
13. Wonderful Communication Mobile Life Welcome to HUAWEI E220 HSDPA USB Modem HUAWEI E220 HSDPA USB Modem User Manual Copyright 2006 Huawei Technologies Co Ltd Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co Ltd Trademarks wW and HUAWEI are trademarks of Huawei Technologies Co Ltd All other trademarks mentioned in this manual are the property of their respective holders Notice The information in this manual is subject to change without notice Every effort has been made in the preparation of this manual to ensure accuracy of the contents but all statements information and recommendations in this manual do not constitute the warranty of any kind expressed or implied Safety Precautions Before using the wireless device please read the safety precautions carefully and let your children know these so that you can use your wireless device correctly and safely For details see the section Warnings and Precautions Do not switch on your wireless device when it is prohibited to use wireless device or when the wireless device may cause interference or danger Do not use your wireless device while driving Follow any rules or regulations in hospitals and health care facilities Switch off your wireless device near medical apparatus Switch off your wireless device
14. enter the phone number as the message recipient Inbox The Inbox stores received messages It can store up to 1 000 messages e If the Inbox is full and there is a new message the oldest message is auto moved to the Trash e If there is an unread message the number is displayed on the right panel of the home screen On the SMS interface click Inbox to access the Inbox Viewing a Message 1 You can view a message in the Inbox Step Operation 1 ia Click or select Tools gt SMS The SMS interface is displayed 2 Click Inbox to access the Inbox Double click the message to view details There are two types of icons in the Inbox EE Unread messages e Read messages 2 View a message upon its arrival If there is a new message you can hear an alert tone or view an alert window For details refer to System Settings Th sec e With the alert tone function enabled If there is a new message you can hear the alert tone Step Operation 1 Click P or select Tools gt SMS The SMS interface is displayed 2 Click Inbox to access the Inbox Double click the message to view details e With the alert window function enabled If there is a new message you can see the alert window Click To View View details of the message Close Close the alert window Replying to a Message You can reply to a message in the Inbox Step Operation 1 Select double click the message to view detail
15. leting a Message You can delete a draft Step Operation 1 Select one or more drafts and click Delete 2 The draft is moved to the Trash 3 Click Save Trash The Trash stores messages removed from the Inbox Outbox and Draft The Trash can store up to 1 000 messages If the Trash is full and there is a new message the oldest message is auto deleted On the SMS interface click Trash Restoring a Message You can restore a message 20 Step Operation 1 Select one or more messages and click Restore 2 The message is restored Deleting a Message If you delete a message from the Trash it is permanently deleted Step Operation 1 Select one or more messages and click Delete 2 Click OK Exporting a Message You can export messages to a file The file must be txt and csv files Step Operation 1 Select one or more messages 2 Right click the window and select Export to file 3 Select the path and enter the file name 4 Click Save Reports The Reports can store up to 1 000 delivery reports If the Reports is full and there is a new report the oldest report is auto deleted On the SMS interface click Reports Step Operation 1 Select one or more reports and click Delete 2 Click OK CP gt Exporting a Report You can export reports to a file The file must be txt or csv files Step Operation 1 Select one or more reports 2 Right click the window and select Export to
16. message in the Inbox In addition you can unlock a message Step Operation 1 Select one or more messages 2 Right click the window and select Lock or Unlock Note A locked message is marked by El Outbox The Outbox stores sent messages The Outbox can store up to 1 000 messages If the Outbox is full and there is a new message the oldest message is auto moved to the Trash On the SMS interface click Outbox to access the Outbox Viewing a Message You can view a message in the Outbox Step Operation 1 You can view all the messages in the Outbox 2 Double click the message to view details CEP Sending a Message In the Outbox you can send a message Step Operation 1 e Select or double click the message to view details Then click Send e You can send a message to several recipients each time Select several messages and click Send 2 The phone number of the recipient is displayed in the Contacts field You can edit the phone number 3 Write the message 4 Click Send Forwarding a Message In the Outbox you can forward a sent message Step Operation 1 Select or double click the message to view details Then click Forward 2 Enter the phone number of the recipient in the Contacts field or click Contacts to select the contact 3 Details of the message are displayed You can edit the message 4 Click Send Deleting a Message You can delete a message Step Operation 1 e Select one or mo
17. minimized on startup minimized Check the unread On launching Connect checks the unread messages in message s while the USIM SIM card and E220 starting Note Click Default to restore the settings to the default values namely only the Check the unread message s while starting check box is selected Setting SMS Alerts Function Select the SMS Alerts tab to set the following items Option Description Alert window Select the Alert window check box If there is a new message the alert window is displayed You can e Click View to view details e Click Close to close the alert window Alert tone After you select a sound file if there is a new message the sound file is played e Click Browse to select the sound file e Click Play to pre listen to the sound file Note e The SMS sound files must be wav or mid files e If you click Default all the items in the Prompts tab are restored to the default values That is both the Alert window check box and the Alert tone check box are selected Setting the Standby Hibernate Mode Click the Standby Hibernate tab to set the following items Option Description Prevent Standby Hibernate Prevent the PC from turning to the standby or hibernate mode Allow Standby Hibernate Allow the computer to turn to the standby or hibernate mode Note If you click Default the standby hibernate status recovers to its default value that is allow standby or
18. n to the Home 5 SALIRE 8 OntemetServiCe ue EIU ES 10 Network Connection Settings essere 10 Accessing the Internet esses neret enne nennen 11 Volume Statistic ore 12 SES MS ae EM 13 Sending or Receiving a Message rennen 13 Message Import Management essere enne 22 SMS Settings NR 22 SG OMLAC IS eres UU ES 24 Managing COnt cts occ o ted t ecd 24 Importing Exporting Contacts sess 26 HUAWEI i 9 Settings and Information Query Selecting the nre Selecting the Connection Type sss 29 Selecting the Band Ere E ed e e Og EO EORR 29 Managing the PIN Code sisinio neern a aoe 30 System Settings nerse nnan ea re i ee e a deeper cates 31 Diagrn stio ie Reba iei er EN 33 TOSSpecificatiOnSueec ed UU UT SIMI NITE 34 IEA ter e E R 36 and Abbreviations et 38 T HUAWEI Overview Welcome to HUAWEI E220 HSDPA USB Modem hereinafter referred to as E220 With E220 you can easily e Access the Internet e Send or receive text messages e Manage contacts Packing List The E220 package box contains the following items e One E220 HSDPA USB Modem including a PDF document of HUAWEI E220 HSDPA USB Modem U
19. ndows 2000 it is recommended to install patches such as Service Pack 4 or above e Before connecting E220 to the PC power on the PC Otherwise the installation may be affected e The installation procedures vary with the operating system 4 HUAWEI Introduction to Connect Launching Connect Connect E220 to the computer and Connect is auto launched 2 Ifyou are required to enter the Personal Identification Number PIN code enter the correct one and click OK If you enter wrong PIN codes three times consecutively your USIM SIM card is blocked In this case use the PIN Unblocking Key PUK code to unblock it If you enter wrong PUK codes ten times consecutively your USIM SIM card is disabled In this case contact your service provider Note The service provider provides the PIN code and the PUK code For details about how to modify enable or disable the PIN code refer to Managing the PIN Code Introduction to the Home Screen Overview of the Home Screen After Connect is launched the home screen is displayed as follows Connect File Tools Settings Help Duration You can maximize the screen gt Connect File Tools Settings Help 0 1000 Signal From Phone Number Time Content Network No Network Connection Duration Volume Sent Received Volume Rate Top rate Information New messages New SMS reports lt x cic
20. rching 4 Click Stop Search to stop searching Importing Exporting Contacts Importing a Contact You can import contacts to Connect from the USIM SIM card or a file Importing a Contact from a File You can import contacts to Connect from a file The file must be txt or csv files Step Operation 1 Select File gt Import Contacts gt From File 2 In the Open dialog box select the file 3 Click Open to import the file to Connect Importing a Contact from the USIM SIM Card You can import contacts to Connect from the USIM SIM card Step Operation 1 Select File gt Import Contacts gt From USIM SIM Card 2 You can select e Move Import Contacts in the USIM SIM card are deleted e Copy Import Contacts in the USIM SIM card are retained 26 INE 3 Click OK Then select Mobile Home or Office and set whether to apply the operations to all items Then click OK 4 After the importing completes a prompt is displayed to indicate the result Exporting a Contact You can export contacts from Connect to the USIM SIM card or a file Exporting a Contact to a File Do the following Step Operation 1 Select File gt Export Contacts gt To File Then click OK in the pop up dialog box 2 In the Save as dialog box enter the file name with csv as its extension 3 Click Save Exporting a Contact to the USIM SIM Card Do the following Step Operation 1 Select one or more contacts 2 Select File g
21. re messages and click Delete e Double click the message to view details and click Delete 2 The message is moved to the Trash Th ve Saving a Phone Number You can save the phone number of a sent message as a contact Step Operation 1 Select double click the message to view details and click Get Number 2 The New interface is displayed and the phone number of the message is displayed in the Mobile Number field 3 Enter the information of the phone number 4 Click Save Exporting a Message You can export sent messages to a file The file must be txt or csv files Step Operation 1 Select one or more messages 2 Right click the window and select Export to file 3 Select the path and enter the file name 4 Click Save Locking Unlocking a Message To avoid unintentional deletion you can lock a message in the Outbox In addition you can unlock a message Step Operation 1 Select one or more messages 2 Right click the window and select Lock or Unlock Note A locked message is marked by id o Draft You can save a message as a draft The Draft can store up to 1 000 messages If you save a message as a draft only the content of the message is saved On the SMS interface click Draft Editing a Message You can edit a draft Step Operation 1 e Select the draft and click Edit e Double click the draft 2 On the Write interface edit the draft and click Send Save or Clear De
22. s Then click Reply 2 The phone number of the sender is displayed in the Contacts field You can edit the phone number 3 Write the message 4 Click Send Forwarding a Message You can forward a received message Step Operation 1 Select double click the message to view details Then click Forward E Step Operation 2 Enter the phone number of the recipient or click Contacts to select the contact 3 Details of the message are displayed in the text box You can edit it 4 Click Send Deleting a Message You can delete a received message Step Operation 1 e Select one or more messages e Double click the message to view details 2 Click Delete The message is moved to the Trash Saving a Phone Number You can save the phone number of a received message as a contact Step Operation 1 Select double click the message to view details and click Get Number 2 The New interface is displayed and the phone number of the message is displayed in the Mobile Number field 3 Enter the information of the phone number 4 Click Save Exporting a Message You can export received messages to a file The file must be txt or csv files Step Operation 1 Select one or more messages Th we Step Operation 2 Right click the window and select Export to file 3 Select the path and enter the file name 4 Click Save Locking Unlocking a Message To avoid unintentional deletion you can lock a
23. ser Manual and a setup program e Two USB cables e HUAWEI E220 HSDPA USB Modem Quick Start Getting Started Getting to Know Your E220 The following figure shows the indicators and interfaces of E220 USB interface Indicator USIM SIM card slot Note The figure is for your reference only Indicator This indicator indicates the status of E220 Indicator Status Description Off E220 is powered off Blinking twice every E220 is searching for a network or no network is 2 7 seconds green available HUAWEI 5 Indicator Status Description Blinking once every 2 9 seconds green The GSM network is normal Blinking once every 2 9 seconds blue The WCDMA network is normal On green The GPRS data service is established On cyan The HSDPA data service is established On blue The WCDMA data service is established Computer Configuration Requirements To use E220 your PC is required to have CPU Pentium 4 1 GHz or above Memory 128 MB RAM or above Hard disk 50 MB or above Operating system Windows XP or Windows 2000 USB modem interface USB 2 0 full speed Display resolution 800 x 600 or above 1024 x 768 is recommended Make sure that the configuration of your PC meets the requirements Otherwise improper configuration may degrade the performance of your PC Note e For Windows XP it is recommended to install patches such as Service Pack 2 or above e For Wi
24. t Export Contacts gt To USIM SIM Card 3 Click OK 4 After the exporting completes a prompt is displayed to indicate the result EP 27 Note e If you do not select a contact the function is unavailable e The number of contacts that can be saved is determined by the capacity of the USIM SIM card e If the contacts you are exporting exceed the USIM SIM card capacity Connect auto stops the operation Zoe Settings and Information Query Selecting the Network E220 supports manual or auto search of the network To set the search mode select Settings gt Choose Network and select either of the following options e Auto E220 auto searches for a network and registers to the network e Manual You can manually search for networks and select a network for E220 to register Selecting the Connection Type Select Settings gt Choose Connection Type to set the connect type Option Description GPRS Preferred If possible E220 selects the GPRS network 3G Preferred If possible E220 selects the 3G network GPRS Only E220 selects the GPRS network only 3G Only E220 selects the 3G network only Selecting the Band You can set the working band for E220 After setting E220 can work only in the preset working band Select Settings gt Band Selection Then you can select Band GSM900 1800 WCDMA2100 or GSM1900 Managing the PIN Code The PIN code can protect the USIM SIM card from unauthorized use The PIN
Download Pdf Manuals
Related Search