User manual - Ultrative Technology Co., Ltd.
Contents
1. Figure 3 12 Single port phone number setting Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved LATR NT ve UTT 110B VOIP Gateway SIP User manual Table 3 10 single port phone number configurations Single port setting Description Port type The equipment automatically recognize the port is FXS port or FXO port Phone number Write the right phone number Password Write the right password Authenticate Name Write the right authenticate name usually same as thephone number Register option Select Yes or No Prefix Default represent any prefix Accept IP Default represent any IP Port selection Select the port one port number can band multiple port and realize one number multi channel 3 6 2 Port bulk configuration Click Port bulk configuration enter the configuration interface writhe the phone number password register name and select yes or no for register option as the following figure Figure 3 13 Port bulk configuration System Management WAN Settings Port No Extension Password Authenticate Name Register Option LAN Settings 1 6001 coocoo 6001 No v Route Settings 2 6002 leeeeee 6002 No w Sip Settings Page NO 1 Submit Cancel IVR Settings Call Path Port Settings E Phone Number Settings System Tool Progress Tone System Status Figure 3 13 Port bulk configuration 3 7 System tool oign in WEB configuration interface select System tool and you2. Lager Lee Figure 5 7 Edit call path 6Click add call rules button add a call rule 9 with route IP 127 0 0 1 Terminal loopback and click submit button as following figure Figure 5 8 Sip Port 8060 case Chane i Calling Change CO Turn on Turn off Figure 5 8Edit the call path 7 Edit the default digitmap 1 9 x change to 1 8 x as following figure Figure5 9 5 10 and 5 11 Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved 3 6 utente UTT 110B VOIP Gateway SIP User manual DigitMap 1 9 Routa Tp n n n n Sip Port Soin Callas Change Calling Change O Turn an Dun eff Figure 5 9 Edit call path Digi tap Lia Route Ip a 0 0 D Sap Port S060 Callee Chante Calling Change OTurn on Turn off oit Cent Figure 5 10 Edit call path Path Film Ha seiDagitMap Default pat Hai Default Add Call Rules Calles Change Calling Change II a 1 T 1 L1 oC O s ome 9 H H m HCH Es Figure 5 11Edit call path 8 After finish the above configuration FXS port off hook and dial 9 you can hear secondary dialing tone the secondary dialing tone is released by the phone wire of FXO port redial and the called number is out Scene summary This scene described the configuration method of FXS port out through FXS port for the FXS FXO port equipment The out number is 9 and this out numb
3. TRAYS UTT 110B VOIP Gateway SIP User manual Network cable 1 Telephone lines 1 2 2 5 Appearance 2 5 1 Products Panel Diagram Image 2 1 Front Panel Image 2 2 Rear Panel 2 5 2 LED Indicators Table 2 2 Front panel connectors and LEDs Front panel connectors Description and LEDs Alarm LED all the ports open registration while not registered as a flashing softswitch softswitch registration Alarm goes off Active Status indicators the normal operation of the lamp is flashing Power indicator turn the lights connected to the power supply for the long bright state we Port work light off hook ringing the lights are flashing during a call the standby is off Table 2 3 Rear panel connectors and LEDs The rear panel connectors and Description LEDs ON OFF Power switch ON Off AC 100 240 Equipment upstream interface when in the 10M Ethernet port rate the green light orange light off When working in the 100M WAN Ethernet port speed green and orange lights are on when the flow of data out of date the green light orange lights flashing Device configuration interface when in the 10M Ethernet port LAN rate the green light orange light off When working in the 100M Ethernet port speed green and orange lights are on when the flow Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved Ce ULTRATVE UTT 110B VOIP Gateway SIP User manual a of data
4. configuration items DigitMap Called number matching rules IP Routing The purpose of routing IP address the default value0 0 0 0 For the called number to the specified IP address then fill in the IP address of the remote device oignaling port The purpose of routing IP signaling port the default value 5060 Called number In this fill the called number conversion rules conversion Caller ID The default value is off after opening in the Basic conversion Configuration option each port inside the Caller ID transformation option to fill the calling number transformation rules Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved ULTRATVE k 9 UTT 110B VOIP Gateway SIP User manual No conversion IN 6xxx call rules for example explain number conversion example number conversion by A addition D delete C change change the number in three ways A addition There may be an increase in the number of call rules such as call rules 6xxx the number is converted to a0755 6xxx when a user dials 6002 after sending out a number of transform 07 556 002 Note when necessary call rules A front inside any character can fill a p D delete You can delete the rule in which the callnumbers such as call rules 6xxx the number is converted to6x d x it means that the third deleted when users dial the number 6002 transformed sent out after the number of 602 Note A number may be a ne
5. WAN Enttings d ni LAM Settings vus TIFE ouie Aghlamgs Primary SIF Sarwar 183 168 B 100 E Sip Settings Primary SIP Server Fori S000 IVE Settings Cal Path Fort Settings Phone Mumher Enttings System Tool Progress Tana 5ystea Status Figure3 5 SIP Setting Interface Table 3 5SIP configuration Description General All mainstream standard SIP protocol server VOS Encryption Encryption exchange for VOS made soft Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved UCTRNTIVE bh _ VOS type The primary server Primary server port Backup server switch Standby server Standby server port Domain Local signaling port Registration refresh time Heartbeat switch Heartbeat interval Heartbeat Timeout PRACK Session Update Session Update SIP URI parameter to carry User Use PSTN CID UTT 110B VOIP Gateway SIP User manual Asterisk When soft switch as Asterisk optional for this option When the server mode selection VOS encryption media encryption or choose optional signaling encryption Configure the primary SIP server s IP address or domain name Configure the primary server SIP register port the default value 5060 Standby server switch the default is off you need to use an alternate server is turned on After the standby server opens enter the backup SIP server s IP address or domain name After opening the backup server enter the alt
6. 0 0 0 this can be modified alternate DNS server address SNTP switch SNTP service defaults to off select open when you need to enable Preferred Time Preferred time server IP address Default 207 46 197 32 this Server can be modified in the preferred time server IP address Standby time Standby time server IP address Default 0 0 0 0 this can be servers modified spare time server IP address Time Table Select the time zone Default time zone GMT 08 00 Beijing pull down can be modified Adaptive Switch The default value is an adaptive switch is turned on when you close the WAN port can be configured manually operating speed and duplex mode Work rate Adaptive switch to select off choose to work in this rate WAN port Duplex mode Adaptive switch to select off in this selection WAN port duplex mode Signalling three The default value is disabled choose TOS or DSCP QOS mode Signalling three QOS signaling mode is selected as three TOS the TOS TOS three signaling default value is 0 the effective range of values 0 7 IP precedence 6 and 7 are used for network control Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved RAS h UTT 110B VOIP Gateway SIP User manual communications use is not recommended to use Signalling three When three QOS signaling mode is selected PRECEDENCE as TOS signaling three PRECEDENC default value of 0 the effective range of values 0 7 IP precedence
7. 13D ol wh sO wf ml wi meld 20 4 aa zz 7 2314 bb 40 20 mE D 20 E nO sat Cine Figure 5 4 Add phone number Port Type Fito e enan K Pareword Au ien Lx cats Hams Register Option Fzefix H Accept TF Pert Selection gE oof mie off opd cB oT mid oF wel iile M wel i4 e pe owe le ail io all aal 2214 aal ad ssl oH 278 ob 2H sole sil x Ese Figure 5 5 Add Phone number 4 After submit return to phone number configuration interface and you can see the new phone number 9 with port number type FXS as following figure Figure 5 6 Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved 35 UTT 110B VOIP Gateway SIP User manual Port bulk configuration ERR ER ER e jeueed It Isi vient IS ISS vn ISS ISS o wea Re Il ven ISS ISS amp w s baang El Il twr ns haat fume pem i TECH ime eme GREEN CECR eus Ju eurer imme uem bus ns e CR puse Bus ps hawa uae ese ew s fetivetea qum 1 H eur Jus ener fume e Bu qu homa e pese ew ju kaal dues Figure 5 6 Add phone number 5 Enter Call path configuration interface edit the Digitmap Default item as following figure Figure 5 7 po pk IR vera R R a O OO OS BESSERES HH 7 HR La e a 99 oes LE ues os oo aco mom oom Re ei Cs eese e mm T cree a aes
8. 518102 Shenzhen China Hotline 86 755 29630367 Postcode 518102 Webpae http www Ultrative com cn Email support Ultrative com Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved RAS h UTT 110B VOIP Gateway SIP User manual INDEX UTT 110B SERIES VOIP GATEWAY SIP ssseccscssssesessccnnessscescnecssessssnsnssecseennnsssens 1 COPYRIG NEE 2 PARTI MANUAL GUIDANCE scccsie sscsccssssessiccsncscvsscscesscscaxenesusissiaceanscsssusedessssssesensnsetbsses 5 SW PO Eae EN E A E E TE E O REI WT e 1 3 ABOUT THE es Rz IN EE PART I PRODUCT INTRODUG TION H 6 2 1 CHARACTERISTICS OF UTT 110B SERIES VOIP GATEWAY ee ee e ee e 2 2 UTT 110B SERIES SPECIFICATIONS A 2 3 UTT 211OBRMoDELNAME nnne hern nnne arse trke nrnna rnrn nnne PIN e e 2 APPEARANCE sei cuite Ei M Li eM RIDE I 2 9 1 PFOGUCIS Panel Diagrai usua studio nnie a ya xenve Ius tes s uM Une e UNE Cu PNUEUE 2 95 2 LED rie eio EE 2 6 HARDWARE LONNECTION eee ee 2 6 1 Connection to LAN by Static IP or DHCHR sese 2 6 2 As a proxy server is responsible for dial up Internet 2 7 NETWORK ACCESS CONFIGURATION eee 2 8 LOG IN TO THE WEB CONFIGURATION INTERFACE ee nnne nnne nnns PART Ill BASIC WEB SETTINGS eese ee eere eere eere u nnne 14 3 1 SYSTEM MANAGEMENT ies sonic c e n talc i cc e ti vx e X eg 3 2 NETWORK CONFIGURATIO
9. 6 and 7 for network control communications use is not recommended to use Signalling three When the signaling mode is selected as three DSCP QOSDSCP signaling three DSCP default value is 0 Media three QOS The default value is disabled choose TOS or DSCP mode Media three QOS Media TOS three QOS mode selection when signaling three TOS default value is 0 the effective range of values 0 7 IP precedence 6 and 7 for network control communications use is not recommended to use Media triple Media QOS mode is selected as three TOS the signaling PRECEDENCE three PRECEDENC default value is 0 the effective range of values 0 f IP precedence 6 and 7 are used for network control communications use is not recommended to use Media three DSCP When the media three QOS mode is selected as DSCP signaling three DSCP default value is O VLAN The default value is off select Open when needed VLAN ID After VLAN open VLAN ID default value is 0 the effective range of 1 to 4094 VLAN Priority After VLAN open VLAN priority default is O Media VLAN The default value is off you need need to open Media VLAN ID After the media VLAN enabled the media VLAN ID default value is 0 the effective range of 1 to 4094 Media VLAN After the media VLAN enabled the media VLAN priority default Priority is O 3 2 2 LAN Setting Click LAN Settings to modify configurations LAN Settings Syeten Management WAH Settings SLAW Setti
10. Reply from 192 168 11 1 bytes 32 time 1ms TTL 255 If the above prompt appears indicating that the computer has access to the normal communication can be integrated Voice over IP devices and UTT 110B the series C gt ping 192 168 11 1 Pinging 192 168 11 1 with 32 bytes of data Hequest timed out Hequest timed out If the above message appears it means that the computer and the UTT series Voice over IP integrated access devices connected nowhere please first check your UTT 110B Series Voice over IP integrated access device is connected properly under normal circumstances AN port status LEDs are point bright and then enter the Internet Protocol TCP IP Properties page to see if your computer s IP address is configured correctly input at the address bar http 192 168 11 1 LAN Default IP 192 168 11 1 then 3 Click amp Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved 12 ULTRIK sde UTT 110B VOIP Gateway SIP User manual User Name Password Figure2 6 WEB Login Interface User Name admin Password admin Default Username admin passowrd admin Click Enter then Uplink System Protocol sre EFCIHUJ Payload Type 101 RIP Start Port 10000 RTP Port Step HEI Web Port EN Telnet Port 23 No Dialling Timeout Dial up interwal Timeout Ring timeout Sr Z Ringback Timeont eos lt Busy Tone Timecut 1202 Howler Tone Timeout Me ze
11. can see the following figure Figure 3 14 Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved LATR NT ve UTT 110B VOIP Gateway SIP User manual Syztem Banapement System Tool WAR Settings Backup LAN Settings MR Route Settings Sip Settings Restore File E IVE Settings Call Fath Port Settings Phone Mumher Settings TI r pgrade File 8435 M Syrtes Tool Progress Tone 3yrlem Status Figure 3 14 system tool configuration Table 3 11 system tool configuration Configuration item Description for system tool Backup the configuration data for this equipment Restore file Select the right backup file and restore the configuration data for this equipment Restart option Reset reset the equipment Factory reboot restore the default factory setting and restart the equipment Software upgrade file Select the right software and upgrade the software version of the equipment 3 8 Progress tone configuration Sign in web configuration interface and select Progress tone to configure the progress tone as the following figure Figure 3 15 Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved LATR ol ve b System Management WAN Settings LAN Settings Route Settings Sip Settings IVR Settings Call Path Port Settings Phone Number Settings System Tool E Progress Tone System Status UTT 110B VOIP Gateway SIP User manual Progress
12. is closed silence suppression function Echo suppression When turned on the port open echo suppression When closed the port is closed echo suppression DTMF mode The default is rfc2833 Band DTMF signals along with voice transmission r fc2833 The DTMF signal to rfc2833 format with RTP packet transmission sipinfo sipinfo the DTMF signals transmitted by defaults 20ms the drop down can be modified Whenclosed the port is closed fax redundancy Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved f x wl g UTT 110B VOIP Gateway SIP User manual Supply voltage The default value is 48 Unit V the effective range of the value of 12 33 36 57V Loop current The default value is 20 the unit mA the effective range of the value of 14 49mA Ringing voltage The default value of 90 unit V the effective range of 90V 3 6 phone number setting Sign in web configuration interface select phone number setting for setting the phone number as the following figure Figure 3 11 Port bulk configuration ea D em fs O ea II II 6002 FES Activated ET ou Figure 3 11 phone number setting interface 3 6 1 Single port phone number setting Click Edit enter the corresponding single port setting interface as the following figure Figure 3 12 Port Type FXS el Extension 6001 Il o refix pus Port Selection oilv 02
13. shows as below Porti Dazic Setting System Management WAN Settings LAN Settings Route Settings Sip Settings IVR Settings Call Path Port Settings Phone Number Settings System Tool Progress Tone System Status Cancel Figure3 10 Port1Basic Settings Table 3 8 Port 1Basic Settings Settings Caller ID Default FSK while supporting DTMF Caller ID is not required Can Priority oriorityG7 11U G929 G723 so on Length of The default value is 20ms support auto negotiation Audio Packagin Input volume Set the port input volume size Output set the size of the port output volume volume Do Not When turned on the port open DND closed shut down the port Call waiting When turned on the port open call waiting function Hotline switch When turned on the port opens hotline function When closed the Dr arre union emcee Hotline After the switch is turned hotline enter the hotlinenumber number Hotline delay The default value is 0 seconds for immediate hotline way modify POM T deet Hook When turned on the port open for Hook Flash function On the FLASH switch contrary when turned off all relevant functions goes off Including Call Waiting Call Hold RFC2543 or RFC3264 3 way Calling Call Transfer Unattended Blind Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved f x LRT Ere bh c UTT 110B VOIP Gateway SIP User manual Hook Flash The default value is 90ms support drop d
14. speed and duplex mode of work Adaptive switch to select off choose to work in this rate LAN port Duplex mode Adaptive switch to select off in this select LAN port duplex mode 3 2 3 Route Setting Click Route Settings to modify configurations Enute Settings System Manzpement HAN Settings LAN Settings Route Settings Sip Settings IVR Settings Ms bpr Enak e N ping Prataenl WAR Port AN TE Call Path T Port Settings Plone Humber Settings System Tool Progress Tone Zestee Ztatus Submit Figure3 4Route Setting Interface Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved RAS h UTT 110B VOIP Gateway SIP User manual Table 3 4 routing configuration Routing Description configuration items NAT is enabled When closed the device retreat route forwarding When turned on the device opens the route forwarding DMZ When NAT function iS enabled DMZ feature defaults to off select Open when needed DMZ server In the NAT feature is turned on when the DMZ function is turned address on fill in this DMZ address Port Mapping In the NAT feature is turned on turned off when the DMZ port mapping is enabled by default turned off turned on drop down to select the mapping protocol mapping fill WAN port LAN mapped address LAN port mapping these parameters 3 3 SIP Settings Click Sip Settings to modify in the interface below Sip Settings aysiea Management
15. telephone in PSTN side is ok Scene Summary This scene described the application when PSTN gt FXO gt FXS the S O port equipment through local FXO route to local FXS The expanded application for this scene If you need route the call from local FXO port to other IAD equipment or soft switch platform in hotline mode you only need set the route IPof corresponding call rule of the hotline as the IP address of other IAD equipment and the other IAD equipment or soft switch platform also need be able to receive the point to point calls from this S O port equipment Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved
16. using dynamic host configuration protocol to obtain an IP address and other network parameters PPPoE PPPoE open mode Static fixed IP mode Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved UCTRNTIVE bh _ UTT 110B VOIP Gateway SIP User manual Static IP address When the operating mode using When Static the correct input on the configuration items available IP address the device defaults IP address 192 169 0 1 Static Mask Mask with the IP addresses operating mode using When Static you must configure the mask the default value Mask 255 255 255 0 otatic Gateway LAN device where the gateway IP address operating mode using When Static you must configure the gateway address the default value of the static gateway 0 0 0 0 PPPoE account When the operating mode using PPPoE mode enter the correct PPPoE account available no default value PPPoE password When the operating mode using PPPoE mode enter the correct password PPPoE available no default value PPPoE MTU When the operating mode using PPPoE mode PPPoE MTU default value 1480 the drop down can be modified DNS switch DNS service is off by default when you need to enable select Open Preferred DNS DNS server is turned on the preferred DNS address Default address 0 0 0 0 this can be modified in the preferred DNS server address Secondary DNS DNS server is turned on the default secondary DNS addresses address 0
17. 10B VOIP Gateway SIP User manual 105 192 168 6 1 Set Wan port gateway IP as 192 168 6 1 or can configure to actual required gateway IP address 4 2 LAN port IP inquiry and configuration When hearing dialing tone or busy tone after phone off hook type the following function code 200 Inquiry LAN port IP address 201 Inquiry LAN port subnet mask 202 192 168 10 100 set LAN port IP to 192 168 10 100 or can configure to actual required IP address 203 255 255 255 0 set LAN port subnet mask to 255 255 255 0 can set to actual required subnet mask 4 3 Inquiry phone number of the port When hearing dialing tone or busy tone after phone off hook type the following function code 300 inquiry phone number of the port Note After Setting IP address successful it will take effect after on hook no need restart the equipment You can use the new IP address to sign in After start the immediate hotline service for the port you cannot inquiry and configure the IP address Part Five Typical application configuration 16FXS 16FXO 5 1 Configuration of FXS FXO port equipment for dial 9 in secondary dial Sign in Web configuration interface and the detail configuration process is as follows 1select Phone numbersetting as following figure Figure 5 1 Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved UTT 110B VOIP Gateway SIP User manual Port bulk conf
18. 2 view the number 2 According to the above figure the number in FXS port is 6001 6008 6017 6024 Enter port bulk configuration you can see the port type of 1 8 port are FXS port 9 16 port are FXS port 17 24 port are FXS port 25 32 port are FXO port as following figure Figure5 13 QH A Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved UTT 110B VOIP Gateway SIP User manual Port Ro Port Type status Ss S F mm Ces a C soe a en EEE T Gg Pasie Setting ortil m connected Advance Setting b ER L Yoc P Basic Setting Advance Setting ST ET 2 I um Rana ie 1 RIGS EIT d dL f f N Basic Setting Basic Setting in a be Lk Sms Rep P M i sl IN T r an T Darie Setting n ortaz Fe Vo Bees HE L T i TI Q c OD Ol u C3 Ug cr Oo T wo 18 S gt S al 12 Qe Ek 3 click basic setting button on port 9 select turn on for hotline and write 6001 in hotline No field 6001 is the tel number configured in port 1 select 0 in the pull down list in hotline delay field Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved 39 k a Syntra Wanagrannt Port Basic Setting UTT 110B VOIP Gateway SIP User manual WAN Settings aller ID mod S Turn o
19. Callee Change Calling Change Sip Settings IVR Settings m Call Path Port Settings Phone Number Settings System Tool Progress Tone System Status Figure3 7 Add a call path interface Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved LATR NT ve gt UTT 110B VOIP Gateway SIP User manual 3 4 2 Add a call Rule In the call path of configuration interface click the Edit option enter the path to the file configuration interface the following Figure Call Path System Management WAN Settings Path File Name DigitMap Default Add Call Rules LAN Settings Route Settings Number DigitMap Route Ip Sip Port Callee Change Calling Change Sip Settings i 1 9 Turn off IVR Settings G a Tun em Call Path s T d 1 9 Turn off Edit Port Settings Phone Number Settings System Tool Progress Tone System Status Figure3 8 Edit call path interface Default value is DigitMap Default There are 4 call rules within as shown in the above figure Click add call rules then the interface goes to below Call Path Call rules Zorten Management WAN Settings LAN Settings Route Te 0 0 0 0 Koute Settings Sip Part Anan Sip Settings IVE Settings m a Mito W Call Path Submit Cancel Port Settange Phone Number Settings Syeten Tool Progress Tone Syetem Status Figure3 9Add call rule interface Table 3 7 Call rule configuration increases Increased call Explanation rule
20. Internal Number Format internal ringing mode Model e Normal ringing mode Model Hold Node Q signaling Ol Local playback Adain Name adan en Fuer CNN SMP primary server SNMP standby server 0 0 0 0 Community Mane Study public Community Hane Input Alarm Community Name Use E as dial up terminator O Turn off Turn on Figure 2 4 WEB Setting interface Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved 1 3 ULTRATIVE UTT 110B VOIP Gateway SIP User manual Part Ill Basic WEB Settings 3 1 System Management Login Succeeded then go to System Management System Nanagement m Syston Management TAN Sattinga Uplink Sytem Protocol SIF o LAH Settings RFCZSJJ Fayload Type 10 Koute Settings RIP Start Port lL 0000 aap oetlings RTP Part Stop L I xe TVR Settings Web Por Sp Call Fath Port Settings No Dialling Timemst las v Phurns Bumbar settings Dial interval Tippen de A System Tool Ring timeest ls Progrese Tone Ringback Timeout mis oe System Stats Busy Tone Tinerii Liles we J Ur xxx Model w Model v adain eevee 0 0 0 U U 0 U publi publi publi ube Figure3 1 System Management Interface Graph 3 1 System Management Configuration Item oystem upstream Default device using SIP protocol dropdown MGCP H248 RFC2833 payload With DTMF mode rfc2833 use Default value 101 a type limited range of values from 97 to 101 Default the parameters to be consistent with the p
21. N xes eee eee SN WAN SOUNO TTT 32 ROE e EE T2 FOU e eege AR ee ze Oe IA LR u WEE ST Ee EUR eT 94 2 Add Ee EE CES ere IBN CNET 329 1 PON I ANC CCUNO S ee 3 5 2 Advance Settings sse eee eee 3 6 PHONE NUMBER SGETTING nhnhinrnsn ier ssn nsns as nsns sa seda saa sanas nana 3 6 1 Single port phone number setting see ee ee ee e ee ee 36 2 POM DUIK COMMQUIATION EE BD VTE TOOL E 3 8 PROGRESS TONE CONEIGURBATION eerte nnnnnennnnnn nnn enirn nennen sss asas a nasa sanas rna SE EN EEN Kn DEN Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved LATR NT ve UTT 110B VOIP Gateway SIP User manual PART 4 IVR INQUIRY AND IP ADDRESS CONFIGURATION 32 4 1 WAN PORT IP INQUIRY AND CONFIGURATION e e e 32 4 2 LAN PORT IP INQUIRY AND CONFEIGURATION e eee enne eee rr rere mese enisi seen 33 4 3 INQUIRY PHONE NUMBER OF THE PORT 33 PART FIVE TYPICAL APPLICATION CONFIGURATION 16FXS 16FXO 33 5 1 CONFIGURATION OF FXS FXO PORT EQUIPMENT FOR DIAL 9 IN SECONDARY DIAL 33 5 2 FXS FXO EQUIPMENT FXO PORT CONFIGURATION CORRESPONDING FXS PORT 38 Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved ULTRATIVE h UTT 110B VOIP Gateway SIP User manual Part Manual Guidance 1 1 Purpose In order to help users of our devices to understand and use our UTT 110B Series GWs more effectively hereby we prese
22. T 110B Series Voice over IP integrated access device s LAN port to connect to a hub or switch with a network cable network cable can also be used to connect directly to the computer and the LAN port 2 Turn on the computer My Network Places and local connection right click and choose Properties Below the IP address of the computer with UTT 110B Series Voice over IP integrated access device s LAN port IP address is configured on the same network segment UTT 110B Series The factory default LAN port IP voice integrated access device is IP is192 168 11 1 subnet mask is 255 255 255 0 Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved f ULTRATWeE UTT 110B VOIP Gateway SIP User manual F KARR B 2 xj Interne t BR OCI RR 2 x wa xu laa ER dR Piss Z Ene WIRT LARA Tam 3e Piss RAK BE RRS C B374 IP Hitt 0 Ge FA HAY IP Hitt GS IP Dit 1 FAEH QD 255 255 255 0 ERA FIZE M 192 168 0 1 SE QD NH LUMEN 18 DSS ZTE BAP IAD DNS RSE E H g mee rr JE Tk DNS ARS 202 96 128 G AA DNS ARS 202 96 134 133 RO BRARENERS Toe w M HGEERSCUEPR RAIA ADS U Figure2 5 PC Ipaddress Setting Ping command to test whether and UTT 110B Series IP voice integrated access devices connected properly C gt ping 192 168 11 1 Pinging 192 168 11 1 with 32 bytes of data Reply from 192 168 11 1 bytes 32 time 1ms TTL 255
23. Tone Send progress tone setting Region select CHINA v Recv progress tone setting Default Region select CHINA v QUser Custom DialTone RingBack Tone Busy Tone Min ON time 1 Max ON time 1 Min OFF time 1 Max OFF time 1 Min Frequency 1 Max Frequency 1 Min Frequency 2 Max Frequency 2 ON time 2 Max ON time 2 Min OFF time 2 Max OFF time 2 Cadence Cycles 0 3 Figure 3 15 Progress tone configuration interface Table 3 12 Progress tone configuration Configuration item description for progress tone Send progress tone Set progress tone sending by FXS port setting Region select Progress receive setting Default User custom Min Default value are China can select Taiwan Japan Korea United States Germany Russia and etc tone Setting the receive progress tone for FXO port Default value is China can select China Taiwan Japan South Korea United states Germany Russia Can set any of the above country Area including the busy tone KK 57 ring back tone each parameter is separate by 3 9 System status oign in web configuration interface select system status and you can see the following Figure Figure 3 16 System status Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved ULTRATIVE h UTT 110B VOIP Gateway SIP User manual System Management System Status WAN Settings 5ystem Status LAN Settings oduct Type Route S
24. ame type Figure3 10 Port 1 Advance Setting Interface Table 3 9 Port 1 Advanced Configuration Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved ULTRATIVE UTT 110B VOIP Gateway SIP User manual Port Advanced Explanation Configuration ltem Inside and outside When turned on both inside and outside the port open lines the line ringing ringing function When closed the port is closed and outside line ringing function Ordinary time the port is common ringback way When ringtones ring tones open the port function Forward mode The default is off Unconditional Forward All the phone numbers dialed were transferred to the forwarding number Busy turn the number when the line is busy dial the number for all calls are transferred to the forwarding number Forward No Answer biography dial the number no one answered when this number calls to the forwarding number Forwarding number Enter the correct forwarding number available Forward Caller ID When selecting a local display local number choose service remote that displays the number of the remote number Reverse polarity The default value is off reverse polarity signal when Support turned on the phone is turned on when the port will provide anti polarity signal the terminal device can use this signal telephone billing applications Silence Suppression When turned on the port opened silence suppression function When closed the port
25. ed to remove the direct conversion of d followed by d without adding deletecontent C C hange to change the rules on the inside callnumbers such as the number dialed rules 6xxx the number is converted to 6xx c99 sent out after transformation rules when users dial 6002 number is 60099 Note when necessary Any character can be changed by calling the rules inside c content D delete and C change represents one of the rules which call regular character and A addition is added in front of the character in a certain call rules can also be combined such as call rules 6xxx number conversion to 30755 6x d c99 a111 sent out when the user dials the converted number is6002 07556099111 6x d C99 is carried out at the number of transformation 6xxx are 4 the number of bits to be consistent 3 5 Port Settings Click Port Settings Port Settings System Management W N Settings Port No Port Type Status E Basic Settin Advance Settin LAN Settings Porti Frs NEN eee z Route Settings en Basic Setting Advance Setting Port2 FXS Connected Sip Settings IVR Settings Call Path B Port Settings Phone Number Settings System Tool Progress Tone System Status Figure3 10 Port Setting Interface Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved ULTRATIVE h UTT 110B VOIP Gateway SIP User manual 3 5 1 Port Basic Settings Click Port Basic Settings then WEB interface
26. eer device but it can also auto negotiation RTP start port Min sending and receiving RTP port this parameter can not be less than 3000 it is recommended to configure the default value can not be less than 10 000 and can be modified RTP port step RTP step parameter settings the default port 10 the TT E uand mere portfacilities with a default value of 80 can be modified Telnet port telnet port used to configure the device the default Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved ULTRATVE h UTT 110B VOIP Gateway SIP User manual Hook without dialing The default value is 16s the drop down can be timeout modified timeout Ringing Timeout Telephone ringing timeout the default 60s the TO E Ringback Timeout Hear the ringback tone timeout the default 60s the TO epsom emaema Busy Timeout Hear a busy tone timeout the default 120s drop down a emet Howler tone timeout Hear the sound of howler timeout defaults 300s PT E Extension number Line with the distinction between inside and format outside the ring to use Caller ID defaults 6xxx format for extension number use the intercom ringing pattern Inside the ring pattern Mode 1 1 S pass 4S off Mode 2 2 S pass 4S off model 3 0 5 S pass through 0 58 5S 4S broken off Mode 4 1 S can be modified throughthe drop down 3S off Normal ringing mode Mode 1 1S pass 4S off Mode 2 28 pass 4S off model 3 0 5S pass 0 58 off 0 55
27. er can be amended according to actual requirement In this scene we band number 9 to all the FXO port for the equipment and form to a group for number 9 You can also set different numbers banding to different FXO ports and form to multi number group And you can dial different number group and go out throughdifferent FXO port The Expanded application for this scene If the FXS port which is not local FXS port need go out through FXO port such as another IAD equipment or soft switch you can send the called number 9 to the S O equipment and after hearing the secondary dial tone from FXO port and then enter the called number out Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved 37 ULTRIX siwe UTT 110B VOIP Gateway SIP User manual 5 2 FXS FXO Equipment FXO port configuration corresponding FXS port Sign in WEB configuration interface and the detail configuration process is as follows 1 select Phone number setting view the number in current FXS port as following figure figure5 12 Port bulk porra ation Eme Port Toe O mm reme e eer fa RT e Re hec _ T bebe ei oi cM ees ss ke ker mS me NN ms LN Delete E me em Em em guo emm EI DEI Ee eme M e es pn herrea ER eet pape jenes i se ms m e Di p Date ke mn ema IS eat bm bs JS sn pm o Figure 5 1
28. ernate port SIP registration server Fill sip server s domain under normal circumstances and fill the same SIP server IP address for the domain butt IMS IMS platform to fill in the domain name This equipment SIP signaling port the default value 5060 SIP registration refresh time in seconds the default value 600 the actual registration refresh time and softswitch negotiation The default value is off select Open with rport required field Heartbeat off do not send a heartbeat message to the SIP server heart open it will send option heartbeat information to the SIP server Send heartbeat interval the default value of 0 seconds can be modified Send heartbeat timeout during which time the scope of this SIP server if the response has not been the heartbeat information that has been disconnected from the server the default value of 30 seconds and can be modified When turned on invite support 100rel closed invitedoes not support 100rel When turned on support UPDATE when closed does not support UPDATE After the update session is open the session update the default value is 360 the actual conversation time updates and softswitch negotiation When open SIP URI will carry user phone parameter When closed SIP URI does not carry user phone parameter This parameter is only for the FXO port to the PSTN get to use the explicit when turned on to display the number of Copyright 2013 Shenzhen Ultrative Tec
29. ettings 7 Sip Settings System Time Loo Lo CO 21 ZO IVR Settings men Version Information Call Fath Port Settings Hardware Version Phong Humber Settings WAN Information System Tool Mac Address Progress Tone B System Status IP Address LAN Inforsation Figure 3 16 System status System status System status Show product type system run time system time and system start time Version information Show software version and hardware version WAN information Show link status MAC address IP assignment setting IP address subnet mask default gateway preferred DNS server 2 DNS server LAN information Show connect state MAC address IP address subnet mask Start of DHCP IP pool End of DHCP IP pool Active DHCP clients Route information Show NAT start state Turn on or Turn off Part A IVR inquiry and IP address configuration 4 1 WAN port IP inquiry and configuration When hearing dialing tone or busy tone after phone off hook type the following function code 1004t Inquiry wan port IP address 1014t Inquiry wan port subnet mask 1024 Inquiry wan port out gateway IP 103 192 168 6 100 Set WAN port IP to 192 168 6 100 or can configure the actual required IP address 104 255 255 255 0 Set wan port subnet mask to 255 255 255 0 or can configure to actual required subnet mask Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved ULTRATIVE h UTT 1
30. hnologies Co Ltd All rights reserved LATR NT ve b UTT 110B VOIP Gateway SIP User manual o PSTN number closed to display the number of FXO port number 3 4 CallPath In WEB setting interface Select Call Path users can see a default DigitMap Default besides this default Call Path user can manually add his own So far we support maximum 4 different call paths Each call path can set different rules in order to control its authorities Local Calls Long Distance Calls Oversea Calls When the call path is set users can go to Port Settings Basic Settings to choose the one to activate as shown below mS Call Path poole Add a Path File uis cmm E esee Progress Tonn System Status Figure3 7 Call Path Setting Interface By Clicking Edit User can check the detailed rules call rules are consisted by 0 9 s X represents number 0 9 and For example 1 3 4 6 9 213 4 5 6 9 When Routing IP is 0 0 0 0 then the call will be sent to the server address edited in SIP Settings If the routing IP is a specified IP then the calls will be forwarded accordingly p2p as below 3 4 1 Add a call path Click in the bar Path File Name nl in the right information Submit then job done multiple call rule adding supported As show in the interface below Call Path System Management WAN Settings Path File Name Add Call Rules LAN Settings Route Settings Number DigitMap Route Ip Sip Port
31. iguration e en ai uum mu eeng D E EE GN SS RK Es E es e qu Figure 5 1 phone number configuration z z z s RBE aaa il 7 i T es 7 E a 2Click Delete Button delete all the default number in FXO port as following figure Figure 5 2 Port bulk Figure 5 2 Delete planen number Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved 34 UTT 110B VOIP Gateway SIP User manual Port bulk configuration i P Fe eiss Be Lei 6003 P Activated Il eee Po Feed aeo el pos FS activated Eae Lei Pm ps Weess Si Lee Pa FS Activated Eae el pon ps Activated Ss el jew Fe Activated m Onte Paz ps Activated Bas Le pos pxs activated mam el pon FS activated pai el pon mms bessi Eae Peite pom P Activated fait Lei 6023 FG Activated B Lei po Fe Activated Si Gel 16026 FXO ctivated Edit Delete Figure 5 3Delete the phone number 3 Click add phone number button add a new phone number 9 and select all the FXS port to the group of phone number 9 select FXO as port type as following figure Figure 5 4 Far Type FRO ei ior Pesewerd Authontients Wann KH Register Option No ei Prefix l la a Acenpt TP Port Selection BLZ O24 Oi Odi 06 eil Of ell H0 wO 10
32. iver value add services just within the traditional PSTN network providing a more flexible and balanced choice for customers This series UTT 110B VoIP Gateways supports 1 2 channels of VoIP communications has been widely used in Government Agencies Commercial Organizations and Large Corporate for their own communication network It is an ideal product to be used in where VolP communication is required 2 1 Characteristics of UTT 110B Series VOIP Gateway Carrier class reliability Support Efforts to improve fault detection network alarm functions Low Power Consumption and High Density integration Supports 3 Level lightning protection POTS Interfaces support over current protection Using ripple smaller higher quality communication power support surges power lines and other protective lap output stability high reliability and supports instantaneous power protection Using electromagnetic radiation shielding properties of the chassis electromagnetic compatibility ROHS and so do the professional design can effectively shield electromagnetic interference variety of environments Transmission loss loss frequency nonlinear distortion crosstalk attenuation noise and non cross cross heavy heavy noise and other indicators have reached the telecommunicationsstandard Flexible powerful security policy Support administrator login and password protection built in firewall function can effectively prevent the various netwo
33. k bandwidth resources Support Comfort Noise Generation CNG Support echo cancellation up to 64ms Supports adaptive dynamic buffering technique Supports packet loss compensation Support DTMF generation detection Support Caller ID detection and display functions Support DIMF band SIPINFO RFC2833 transmission technology Support flexible input output gain control Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved LATR NT ve UTT 110B VOIP Gateway SIP User manual 1 1 Lifeline function supported Support one phone dual number function 2 2 UTT 110B Series Specifications Graph 2 1 UTT 110B Series Specifications Project 1 UTT 110B Series Adaptor Input Input 100 240V Output 12V 1A Output Interface WAN 10 100Base T RJ 45 for LAN Auto MDIX Interface LAN 10 100Base T RJ 45 for PC Auto MDIX Power Consumption Idle 4 W full load 6W Operating b4 50 C Temperature Relative Humidity 5 9596 non condensing The main chip 5VT 1310 CODEC ZL88601 SDRAM 256MB 0000000000000 SE 140g 2 3 UTT 110B Model Name Graph 2 2 UTT 110B Model Name Product Name UTT 110B 1FXS E 0 0 urawsams Ja 0 o o UTT 1108 1FXSIFXO 2 4 Packaging Before installing make sure that the product packing list UTT 110B Gateway 1 Power Cord 1 Product Manuals CD 1 Product warranty card 1 Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved
34. n O Turn of f LAN Settings Route Settings Sip Settings IYE Settings Call Path B Port Settings Ken Phone Number Settings Hotline N 8001 System Tool Hotline Dela H v Progress Tone System Status Figure 5 14 Port configuration 4 And so on select 6002 as the hotline number for port 10 6003 as hotline number for Port 11 6017 as hotline number for port 25 6024 as hotline number for port 32 5 Enter call path configuration interface edit Digitmap Default item add a call rule named 6xxx route OP is 127 0 0 1 Terminal loopback as following figure Figure 5 15 Call Path Syetan Management WAH Settings Gm T so Path Film age 105631 Han Def salt Add Call Rules LAW Settings Route Setlingi Humber Digil ap Route Jp aap Fort Calles Change calling Change 2 Edit Sip Settings E eas Sa 2 Gury laaf 1 Enel Turn off Edit Malata IVE setiings 1 L Em l j i Edit Delete B Call Path ll J d ll i 1916 U 0 DH OG Turn off Edit Delete Port Settings i 1 1 127 0 0 1 Ee Turn off Edit Del Phone Maher Settings System Tool 3ulait Cancel Progress Tone System Status Figure 5 15 Edit call path 6 After the above configuration is finished when dialing the PSTN number connected to FXO port through the PSTN number the S port telephone in corresponding hotline will ring and after off hook in S port normal talk with the
35. ngs IP Address 192 168 11 1 Route Settings Subnet Mask Sip Settings IYR Settings HCP Ip pool 192 168 81 5 Call Path End of DHCP Ip pool 192 168 11 294 Port Settings Phone Number Settings Default DNS Addres 202 98 128 84 System Tool OED AEE ed SS T et 192 168 1101 Progrese Tone System Status Submit Cancel Figure3 3 LAN Setting Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved ULTRITVE UTT 110B VOIP Gateway SIP User manual Table 3 3 LAN configuration LAN Description configuration items MAC address Display the MAC address of the LAN port IP addresses LAN IP address of the default is 192 168 11 1 change the IP address in this LAN port LAN port mask defaults 255 255 255 0 in this modification LAN port mask DHCP DHCP server defaults to off select Open when needed IP pool After the DHCP server is turned on connected to the LAN port to starting obtain an IP network terminal starts from that address address End IP After the DHCP server is turned on connected to the LAN port of address pool the network terminal in front of the address to obtain IP Lease Term IP address lease duration the default value 7200 The default Default DNS Address 202 96 128 86 DNS address The default Default Gateway address 192 168 11 1 gateway address Adaptive switch The default value is an adaptive switch is turned on turned off manually configure the LAN port
36. nt this User Manual with our sincerity This Manual consists of all detailed information that one need to know about the products 1 2 Target Readers The target readers of this manual includes I T Engineer Sales Engineer NOC 1 3 About the content UTT 110BSeries VOIP Gateway SIP User manual offers detailed hardware specifications installations allocation and LED indication together with elaborate WEB configuration demonstration This manual has the following Part l Manual Guidance Part Il Product Introduction Part Ill Basic WEB Settings Part IV IVR Inquiry IP address setting Part V Typical Scenario 1 4 Remarks All the following Examples are based on UTT 7500 16FXS16FXO as the only subject Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved LATR NT ve b UTT 110B VOIP Gateway SIP User manual Part Il Product Introduction UTT 110B Series VOIP Gateway gives way to standard IP Audio Fax Data services which is also called Integrated Access Device or Access Gateway Normally in a NGN UTT 110B belongs to the Access Layer of the network Its main role is to combine all network terminals into a unified web in order to make all services possible in the network By adhering all traditional circuit exchange features UTT 110B further delivers advantages that IP technology can bring making smooth migration from traditional PSTN to NGN possible At the meantime UTT 110B can del
37. out of date the green light orange lights flashing NN FXS connected to a telephone or PBX trunk interfaces a FXO interfaces connected to the PSTN or PBX extension 2 6 Hardware Connection 2 6 1 Connection to LAN by Static IP or DHCP 1 applies has internal LAN or home users 2 WAN port UTT 110B Series integrated access devices connected to the hub or switch as shown in Figure 2 3 3 WAN port based on the local area network environment using PPPoE dial up mode dynamically obtain IP DHCP or static IP mode EYGI 10A Figure 2 3 Series integrated access devices in the LAN connection 2 6 2 As a proxy server is responsible for dial up Internet 1 UTT 110B Series Voice over IP Integrated Access Device Modem WAN port directly connected with ADSL Cable as shown in Figure 2 4 2 UTT 110B Series Voice over IP Integrated Access Device as a proxy server agent in charge of the Internet Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved f ULTRATVE gt UTT 110B VOIP Gateway SIP User manual Figure 2 4 UTT 110B Series Integrated Access Device as a proxy server connection 2 7 Network Access Configuration Firstly confirm the connection WAN port UTT 110B Series integrated access devices support PPPoE dynamic IP address or a static IP address mode 2 8 Log in to the WEB Configuration Interface 1 selection has a computer card and TCP IP protocol installed the computer and UT
38. own menu modification Upper limit Hook Flash The default value is 600ms support drop down menu Lower Limit modification Fax mode The default value of T38 mode transparent mode or VOICEmode as necessary Select the call Default is the default Call path file if multiple call path path of the file required then it can be modified from the drop down menu Caller ID With the call path changeover switch inside the calling number conversion to use after opening the calling number to fill in this transformation rules transformation rules reference called number conversion rules Media This setting is for the FXO port when turned on if not Detection detected PSTN FXO port side of the media stream FXO port will automatically hang up when closed is not detected 3 5 2 Advance Settings Click Advance Settings in Port Settings then interface goes like the figure below Port Adwanes Setting System Banagenent WAN Settings Ringer Variation O Turn on Tarn off LAN Settings Route settings Ingide ring tomer option Mode w Sip Setting Normal ring tomes options Hodel w IVE Settings Call Forward Turn off F Call Pash il Forward Humber 1000 Phone Humber Settings Polarity heverra O Turn on ESI Tarn off Syrtem Wool al Frogeess Tons Zyrtem Status ji time lt Sundance Feed voltage 48 12 93 36 50 Loop current 20 18 4S8m Ring Voltage EI Go Inpedance setting UE Cancel J sections apply to all portels
39. pass 4S off Mode 4 1 S can be modified throughthe drop down 3S off Hold mode The default value for the signaling mode you can select local playback Administrator name Default administrator name admin can be modified Password SNMP standby server In this alternate fill SNMP server IP address or Bid PN name Fill in this write community name name Alarm group name ill in this alarm group name Use the sign as a dial After opening key to dial a terminator after the retreat terminator key to send a number to call Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved LATR NT ve UTT 110B VOIP Gateway SIP User manual 3 2 Network Configuration 3 2 1 WAN Settings Click Wan Settings to modify configurations VAN Settings System Management RAN Settings Hos ane SIP AG LAN Settings Nac Address 2 2 13 04 12 3c Route Settings Sip Settings Static Ir 192 169 0 1 IYE Settings Submet Hack 255 755 255 0 Call Path jatewa 0 0 D I Port Settings Phone Bmber Settings Systen Tool Progress Tone System Status Figure3 2 WAN Setting Interface Table 3 2 WAN configuration WAN configuration Description items Host name Names can configure the device the device defaults to the hostname SIP AG the user name of the device can be configured as required MAC address Display the MAC address of the WAN port Operating Mode WAN port mode DHCP Open the DHCP mode
40. rk virus attacks and improve data security Multiple protocol support capabilities Support the SIP protocol Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved f x ULTRATIVE a UTT 110B VOIP Gateway SIP User manual Support SNMP network management protocol centralized network management devices remote monitoring and maintenance Support T 30 T 38 voice pass through protocol fax service on IP bearer network Support RTP RTCP protocol to achieve real time voice packet encapsulation and voice playback Audio Services support capabilities oupport for voice fax Modem services Support a variety of basic voice services and value added services IP telephony and traditional PSTN phone switch Flexible access Support IP line access Support xDSL dial up access Support Cable Modem access Diversity management Support for SNMP based remote centralized network management device Web based network management support equipment Powerful QoS guarantee Based on IPv4 Tos and DiffServ support services to ensure the voice priority Support IEEE802 1P IEEE802 1Q Multi adjustable parameters Including the supply voltage can be adjusted the loop current ringing voltage long term short term impedance parameters and so on Advanced voice processing technology support ITU T G 711a mu G 729 G 723 1 and other speech coding Support voice activity detection VAD effectively save networ
41. vente UTT 110B VOIP Gateway SIP User manual UTT 110B Series VOIP Gateway SIP d X c es ys Copyright 2013 Shenzhen Ultrative Technologies Co Ltd All rights reserved ULTRNTWVE gt UTT 110B VOIP Gateway SIP User manual Copyright This manual refers to the sole ownership by the Shenzhen Ultrative Technology Co Ltd hereinafter referred to as Ultrative exclusive ownership without the written permission of the Company any unit or individual is not entitled to any form of copy disseminate and reproduction in part or all of the contents of this manual Ultrative reserves the right to charge against law Note This manual is for the user of UTT 110B Series VOIP gateways the company has the final interpretation of the manual and might improve at any time the products mentioned and the manual itself without prior noticing This document contains proprietary intellectual property rights owned by Shenzhen Ultrative Technology Co Ltd all rights reserved Unless mentioned elsewhere Shenzhen Ultrative Technology Co Ltd is the only registered trademark in China and worldwide For more information please contact us directly Windows 98 NT 2000 XP 2003 7 Windows operating systems mentioned in this manual its trademarks and products are copyright owned by Microsoft Corporation Company Shenzhen Ultrative Technologies Co Ltd Address 011 6 F Block A Hedong Bldg Liutang Rd Xixiang St Bao An District
Download Pdf Manuals
Related Search