The Settings Screen - SODAX - water dispenser and water machines
Contents
1. 29 30 Changing the Dispenser s Water Supply Source During the dispenser s initial installation a water supply source was selected If you wish to change the present water supply source please contact the Service Department CLOSE main water tap s and press NEXT The change will have no effect the dispenser s performance The changing of the water supply source is accomplished by using the SETTINGS display To access the menu touch the En icon on the SETTINGS display Fill reservoir tank When tank is full press NEXT To select the water supply system as the source tap water touch the icon To selects the dispenser s own water reservoir touch the 4 icon Touch the CONFIRM screen button to confirm and save your selection Select type of water feed a CAUTION If the water supply system was selected i the following display will appear eee ee Me r Ensure that the shut off faucet connecting water tap is OPEN f the dispenser to the water system is open Touch the NEXT screen button to continue 31 32 If the dispenser s built in water reservoir was selected as the water supply source the Standalone mode please ensure the water faucet is closed Touch the NEXT screen button to continue Following the selection of the built in water reservoir as the water source the following display will appear e Remove the reservoir s top cover and fill it with water You may remove the reservoir from2. USER GUIDE Introduction Dear Customer We thank for your wise decision to purchase the SODAX X1 X10 the Water Soda dispenser manufactured by the SODAX S r l company in Italy Your SODAX X1 X10 dispenser contains the latest most advanced technologies utilized in the field of filtering and water purification in household office water dispensing systems In order to maximize your enjoyment and utility from this product please read this guide carefully it contains the required safety information and will guide you step by step how to install program and operate the dispenser s features It will also show you how to replace its consumable components to ensure the continuous supply of purified filtered and tasty cold warm or hot water and of carbonated soda water for X1 Please comply with the warnings and safety precautions to prevent the risk of accidental spillage of hot water The child safety feature should always be activated when applicable Please keep this guide handy for future reference Sincerely SODAX TEAM Important Safeguards and Precautions When using electrical appliances basic safety precautions should always be followed including the following 1 2 10 11 12 13 Read all instructions Do not touch hot surfaces Use handles or knobs To protect against fire electric shock and injury to persons do not immerse cord plugs or appliance in water or other liquid Clo
3. To set different volumes and temperatures repeat the last three steps using one of the the icons in the MY CUP display Setting the Carbonation Level only X1 You may select one of the tree available water carbonation levels Soda strength Light Medium and Strong The dispenser s soda water carbonation level default is Medium To select change the carbonation level access the SETTINGS display SETTINGS Volumes and Temperatures 2 Touch the temperature volume setting icon fi to access the soda strength menu e Touch the soda strength icon Gi to enter the SETTINGS SODA soda strength selection display Touch the desired soda strength icon The icon will be highlighted Touch the CONFIRM screen button to save the selection and continue Setting the cold water volume in a glass or a jug SETTINGS Volumes and Temperatures Touch the temperature volume setting icon i in the SETTINGS display to access the cold water or jug volume menu Touch the cold water J icon in the SETTINGS Cold display To dispense a measured volume of water you may select the measured volume of a drinking glass or of a water jug To set the cold water volume to be dispensed into the glass touch the g icon to access the menu Setting the Poured Cold Water Volume SETTINGS COLD cup volume 28 Place a glass cup under the spout Touch the g icon and keep you finger on the icon while water is
4. Bottle Warning When the empty bottle display appears the CO bottle should be changed to enable the production of soda water wee ie Le CO bottle is empty please replace it Should you decide not the replace the bottle at this time touch the NEXT screen button to exit this display To replace the CO bottle touch NEXT The dispenser may now be used to dispense only hot and cold water Removing the Empty Bottle Lift the dispenser s top cover i Remove the water reservoir e unt CO tank Pull up the bottle installation removal into unit mechanism handle and pull out the bottle p Release the bottle from the mechanism by twisting the adapter bottle assembly 1 4 turn clockwise Unscrew the adapter from the empty bottle Installing the Replacement Bottle Screw on the adapter onto the full CO bottle Lower the assembly into place the installation removal mechanism and turn the assembly quarter turn counterclockwise Replace the water reservoir and the top cover Touch the NEXT screen button 37 The technical settings screen enables you to carry out routine maintenance of the dispenser To prevent problems stemming from stone buildup periodically clean and rinse the reservoirs and the internal system parts that come in touch with the water You may cancel the screen automatic blackout following the dispensing operation and keep the screen lit at all times However this mode is not recom
5. No Soda Water flow only X1 Water leakage under the dispenser Water tastes strange Possible Cause The dispenser in not connected to the electrical system The fuse is burned Power shortage The dispenser in not connected to the electrical system The shutoff faucet is closed The water supply reservoir is empty Household water system shut down Cold water temperature was set too high Too high cold water consumption High rate of hot water use Water heating element faulty The CO bottle is empty The Soda water tank not completely filled The drip tray is full Water leakage from the dispenser The dispenser is new used less than a month The dispenser was not used for a number of days The filter was not replaced as required 41 Plug the power cord into the walll socket Replace the fuse 10 Amp Wait for the renewal of the power supply Plug the power cord into the walll socket Open the faucet Fill the reservoir Wait for the renewal of the water supply Lower the cold water temperature setting Wait approx 20 minutes for the water to cool down Touch the 6 icon wait one minute and try again Contact the Service Department Replace the CO bottle Wait one minute and try again Empty the drip tray Disconnect the dispenser from the electricity turn OFF the shutoff faucet if applicable and contact the Service Department Touch the cold water icon LA on the dispensing mode
6. TECHNICAL FEATURES Electrical and Power ratings Mains Voltage Frequency Cooling System power consumption Heating System power consumption Current consumption Cooling System Performances Cold water reservoir volume Soda Water reservoir volume Cold water output per hour Dispensing rate one glass per 1 30 minutes Cooling Temperature Range Climatic Class Heating System Performances Hot water reservoir volume Hot water output per hour Dispensing rate one glass every 45 seconds Heating Temperature Range Filtration and Purification Chlorine reduction Filtration level Filter service life UV lamp power UV germicidial performance Water Supply Water reservoir volume Reservoir pump pressure Reservoir pump power supply Water System inlet pressure range Water Inlet Temperature range Dimensions Wt Width Depth Height Weight 230 Vac 50 Hz 100 Watt max 1800 Watt max 8 0 Amps max 700 ml X1 1400 ml X10 1000 ml X1 40 glasses 8 liters 5 16 C ST 1125 ml 80 glasses 16 liters Up to 97 C Over 75 Class 1 85 5um 1500 liters 6 months 11W Class B 2000 ml X1 3500 ml X10 3 0 bar max 24 Vdc 2 5 3 5 bar 0 25MPa 0 35MPa 5 C 25 C Connect the Sodax X1 X10 dispenser to the electrical system only via a residual current circuit breaker not higher than 30 milliamps Standard glass volume 200 ml Chlorine red
7. being poured When the glass cup is filled with the desired volume remove your finger The dispensing will stop and the CONFIRM screen button will appear SETTINGS COLD cup volume Touch the CONFIRM screen button to confirm Changing the Display Language and save this volume setting for next time or repeat the steps for saving another volume This feature is used to select change the displays and menus language To access the language select change menu touch the g icon in the settings display The language selection display will open CONFIRM Setting the Volume of Cold Water in a Jug SETTINGS Cold Touch the jug icon in the SETTINGS A Cold display to access the menu CUP VOLUME JUG YOLUME Touch the flag icon representing the selected language Touch the Metric Units or the Imperial Units icon to select the desired system Touch the NEXT screen button to confirm and continue To set the measured volume of cold water in a jug Remuved the drop collector and insert it upside down Place the jug under the water spout Touch the jug icon g and keep your finger on the icon while water is dispensed into the jug When the jug is full to the desired level lift your finger off the icon The flow will stop and the CONFIRM screen button will appear on the display Touch the CONFIRM screen button to confirm and save this volume setting for next time or repeat the steps to save another volume
8. housing 12 Main fuse The Main Display X1 Child i Settings screen Clock Protection ch Active 11 00 ena Jug Boiling 7777 dispensing Water ikon icon MY CUP Hot water My Cup Soda Cold water icon icon Water icon icon The Main Display X10 Child Settings screen Clock Protection is icon not Active a l Vv _ Boiling 5 LEEEETTTTEFIA Jug Water dispensing icon icon ol MY CUP Hot water My Cup Cold water icon icon icon Installing your SODAX X1 X10 Water Soda Dispenser WARNING It is recommended that the connection of the SODAX X1 X10 dispenser to the household water supply system and the readying of the dispenser for use will be accomplished by an authorized service person Selecting the water supply source e Connect the dispenser to the household water supply system e Use the dispenser as a standalone unit by utilizing its built in integrated water reservoir as the water source When selecting the standalone mode the dispenser may be connected to an external water supply source Using the SODAX X1 X10 as a standalone See page 11 Preparing the SODAX X1 X10 for Operation 9 pa CAUTION Connection to the water main supply source Any temporary connections are forbidden for a good functioning of the dispenser The following operations must be carried out by a skilled staff During the installation new water supply pipes for connection to the water mains must
9. large container e Place a container at least 3 liter capacity p under the spout Make sure the shutoff valve connecting then press NEXT 5 under the dispenser s spout CLOSE main water tap the dispenser to the water supply system e Touch the NEXT screen button and press NEXT is CLOSED Note Touching NEXT will start the sanitation process Water will fill the cold amp hot water reservoirs This water will be used to flush and sanitize the entire system Touch the NEXT screen button to continue The process will last several minutes Make sure the faucet connecting the dispenser Ms cure that the to the water supply system is OPEN water tap is OPEN j Please note Touch the NEXT screen button The sanitation process may be stopped at Please wait while any time by touching the PAUSE icon Q machine is cleaned It will take few minutes Filling the built in water reservoir To continue the process touch the l standalone operating mode E CONTINUE icon W gl Note machine is cleaned It De hapis full press This screen will display if the built in reservoir will take few minutes If the built in reservoir was chosen as the option was selected as the water source It water supply source a warning screen may will also appear each time the reservoir is appear from time to time requesting you to almost empty e Lift the reservoir by lifting up its handle refill the reservoir e Fill the tank with water to th
10. on the nameplate corresponds with your voltage 8 If the supply cord is damaged it must be replaced by the manufacturer his service agent or similarly by a qualified person in order to avoid a hazard 9 Never use warm or hot water to fill the water tank Use cold water only 10 Keep your hands and the cord away from hot parts of the appliance during operation 11 Never clean with scrubbing powders or harsh cleaners Simply use a soft cloth dampened with water INSTRUCTIONS FOR POWER SUPPLY CONNECTION If a long detachable power supply strip or extension cord is used 1 The marked electrical rating of the detachable power supply cord or extension cord should be at least as great as the electrical rating of the appliance 2 If the appliance is of the grounded type the extension cord should be a grounding type 3 wire cord 3 The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over Contents WTEC CG HOU srece asecinacucetyeaceseeanmendinecdmco E E E niece cee eimeneeutinsseeesenee 1 Imporiant Salequards and Precautions wianisinnseatermecinnaladusdvedeewisvarueniicaletwadeneamasvnelneasnwns 2 INSTFUCTIONS TOF Power SUDDIY CONNECCION 5 cacicsinnnecinaacnammcsnnainwscsexnedendweniwadiiasneieanemwndwcdmaaauaine 3 DGICIV IMSMUCTIONS vsx052cessteataceexecocecereeseieaces dee eceeanseveseeteceareslitescensenestaccsesaseedeeasesceeca 5 Solel
11. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product 44
12. TIME icon in the SETTINGS clock options display to access the set time options SETTINGS Clack options oy To access the clock setting menu touch the SETTINGS Chid pretoction FS To prevent children from dispensing hot or time icon J boiling water from the dispenser touch the Press the icon of your Child Saftey ON icon The icon will be choice for activating f or cancel Child Safety highlighted and will be copied to the upper The Set Time display will appear mode part of the Water Dispensing Display g To disable the Child Safety feature touch the Child Safety OFF icon Touch the CONFIRM screen button Select the 12h or 24h time system by touching the desired icon The selected icon will be highlighted Touch the up or down arrows to set the hour and the minutes Every touch advances reverses the reading by one numeral Touch and hold the arrows to advance To dispense hot boiling water while the Child Safety feature is ON touch the child safety icon m reverse faster in the Water Dispensing Display see page 16 to temporarily override the child safety feature Touch the HOT icon A to dispense the water Please Note The clock will reset to 12 00 noon following a power shortage or the disconnection of the dispenser from the electrical system To return to the previous screen touch the BACK screen button To confirm the time setting and continue touch the CONFIRM screen button 19 20 Set
13. creen p Pull up heGOs hande Insert the CO bottle into its cavity Install the adapter bottle assembly by rotating it a quarter turn clockwise Push the handle down until locks in place Touch the NEXT screen button to confirm and continue Selecting the touch screen operating language After the dispenser is plugged into the electric socket The CHOSE LANGUAGE screen is displayed Touch the national flag icon to select your language All screens and menus will appear in the selected language Touch the Metric Units or the Imperial units icon to select the desired system Touch the NEXT screen button to confirm and continue Selecting the water supply source mode eee typa e Ifthe SODAX X1 X10 is to be fed by the of water feed household water system touch the faucet icon If you chose to use the SODAX X1 X10 as a standalone utilizing the dispenser s built Starting the SODAX X1 X10 Installation in water reservoir as the water supply Procedure ACK CONTR source touch the jug icon Touch the hana icon to start the installtion Touch the CONFIRM screen button to and sanitation proceedures confirm your choice and continue vie J a T UCH SCREEN TO START RE NOTE gt You may change the dispenser s water supply source anytime See the information regarding the SETTINGS menu screen on page 18 ayn 11 12 Preparing the SODAX X1 X10 for the CAUTION sanitation procedure Place a
14. e maximum a level mark on the reservoir s side e When reservoir is full replace the cover and but it back into the machine The blue progress bar indicates the progress of the sanitation process e Touch the NEXT screen button Eg CAUTION The Sanitation procedure cleanses the dispenser s internal system and the new filter by rinsing and washing away all foreign matter or residues 13 14 At the end of the sanitation process the next screen will appear with the prompt Did water flow out from the dispensing spout during sanitation Did water come out P If yes touch the YES screen button to spout i from the spout continue If no touch the NO screen button to go back and choose the correct water source After completing the sanitation process the dispenser is ready to dispense clean filtered hot cold or soda water only X1 Please wait while watar is boiling The next screen will inform you that a few minutes are needed for the SODAX X1 X10 to heat and boil the water in its hot water reservoir and to cool the water in its cold water reservoir Water Dispensing Display X10 Child protection disabled Child protection active 15 Water Dispensing Display X1 Child protection disabled Child protection active Dispensing water is accomplished by touching the desired icon Touch the COLD or SODA icons briefly soda only for X1 to dispense the set volume of cold or soda wat
15. eat Cool down the machine before insert or remove any component Never use warm or hot water to fill the water tank Use cold water only Never clean with scrubbing powders or harsh cleaners Simply use a soft cloth dampened with water Do not keep the machine at temperature below 0 C Residue water in the system may freeze and cause damage Do not leave water in the water tank when the machine is not used over a longer period of time The water can become contaminated Use fresh water every time you use the machine Safety Precautions General e The SODAX X1 X10 dispenser system is intended to treat water supplied by the household water supply system only should health hazard bulletins be issued by the local Public Health authorities regarding the safety of the drinking water supply please comply with their instructions and boil the drinking water if instructed to do so The dispenser s performance criteria were lab tested under controlled conditions During regular use changes in the system s performance may occur based on environmental conditions DO NOT change or modify the mechanical electrical electronic components in the system and DO NOT use non genuine replacement parts DO NOT allow children under the age of 12 to use the boiling water feature of the dispenser With small children present keep the Child Safety protective feature activated at all times The Display Screen The dispenser s display screen is a touch scree
16. ection selection Support Setting Screen Icons Brief Overview A yellow circle on the soda glass icon in the water dispensing display indicates the soda The SETTINGS screen enables you to set and customize the following features functions water is not available as long as the CO bottle was not replaced Child Safety Prevents small children from dispensing hot boiling water Date amp Time Sets the clock energy saving feature sleep mode and wake up times Volumes amp Temperatures Sets cup sizes water volumes and temperatures Changing or select the water supply source Dispensing cold water into a glass or jug a The household water supply system Touch briefly the appropriate icon to automatically dispense the preset volume b The built in water reservoir Standalone mode Touch and hold your finger on an icon to dispense any desired volume Selecting the display language Changes the screen display menu language Tech Support The Tech Support display screen provides technical information and is used by the service persons Touch the Home icon top right corner to access the Water Dispensing Display see page 16 17 18 Child Safety Setting the Times Touching this icon will enable you e To set the time indicated on the dispenser s display e Toset the Energy Saving feature e Toset the Sleep Wake Up mode In the SETTINGS display touch the fy The Child Protection display will appear Touch the
17. efly touching the appropriate glass icon The dispenser will dispense the exact volume You may preset 4 different volumes and temperatures for multiple users using the MY CUP feature In the SETTINGS display touch the hot water temperature and volume icon fh to access the hot water volume and temperature selection menu yN WARNING The water dispensed by the dispenser may be at the boiling temperature and may scald you Be careful while dispensing hot water Do not allow your fingers to touch the water With children around always activate the Child Protection feature 23 Setting the Dispensed Volume X1 SETTINGS Volumes and Temperatures SETTIN GS a Hol Water SETTINGS HOT WATER volume Touch the hot water cup icon a in the Volume and Temperatures Setting display The following display will appear Touch the nd icon to set the hot water volume e Place a glass under the spout e Touch and keep your finger on the nd icon during the dispensing e When the glass is filled to the desired volume lift your finger off e The flow will stop and the CONFIRM screen button will appear Touch the CONFIRM screen button to set and save the hot water volume To continue to set another volume repeat these steps Setting the Hot Water Temperature ING MyTemp F Touch the baby bottle icon gO to access the m 2 Touch the temperature setting icon lj to water volume and temperature setting
18. eplacement Replacing The Filter To remove the warning and return to the The Sodax filter has been tested for high efficacy chlorine reduction and for high performance dispensing screen touch the NEXT screen particle reduction button Replacing the UV Lamp To ensure the supply of filtered drinking water per the specifications and to ensure the efficient filtering by the filter the filter must be replaced every 6 months yN WARNING Two weeks prior to the scheduled replacement date a warning is displayed on the screen indicating that the filter should be replaced soon This warning will reappear any time a dispensing icon is touched When the year is over a warning will display indicating that the service life of the lamp has ended and that the purification level of the water delivered by the SODAX X1 X10 is below the specified level Please replace the lamp WARNING Press REPLACE to proceed with the UV lamp replacing date expired replacement or press CLOSE to shut off the To clear the warning and return to the dispensing screen touch the NEXT screen For keeping purified water replace UV lamp dispenser WARMING button To clear the warning and return to the a i The filter has almost expired dispensing screen touch the NEXT screen Please replace it as soon as button palo yN WARNING e Do not turn on the UV lamp when it is outside the dispenser danger of radiation to At the end of six months of use the me
19. er which was determined using the SETTINGS display see page 18 If no volume was set the dispenser will dispense the default water volume set in the factory 140 cc Touch and hold your finger on the Cold or Soda only X1 icons to dispense water as long as your finger remains on the icon Lift your finger to stop the dispensing Dispensing Hot Water PN WARNING DO NOT allow children under the age of 12 to use the boiling water feature of the dispenser With small children present keep the children safety feature activated at all times Under normal operating conditions the dispenser maintains the water at a temperature range of 80 C to 92 C See the settings for Hot water temperature on page 25 Within this temperature range the icon of the cup HOT is HIGHLIGHTED If you want to increase the temperature to boil water touch the icon EXTRA HOT The icon will illuminate while the heating element will heat the water Once you have reached the boiling point the icon will turn off At a temperature lower than 4 C compared the set temperature the icon HOT function is turned off and the hot water is not available To boil water touch the EXTRA HOT or wait for the water to be brought up to temperature When the child protection feature is activated the system prevents the instantaneous dispensing of hot water See the Child Protection feature below To dispense hot water when the child protection is active touch the chi
20. es Wait for will take few minutes the process to complete During the rinsing an sanitation process water will be dispensed into the external Please wait while f i i o container When the container is almost full will take few minutes touch the pause icon jj to enable you to empty the reservoir in time Return the empty container and touch the Continue icon 4 to complete the process a If the dispenser s supply water source was selected during the initial installation stage as the built in reservoir of the dispenser you will be prompted to refill the water supply reservoir once it was emptied during the rinsing and sanitation process Fill the water supply reservoir You may be asked to fill the dispenser reservoirs more than once 39 The Serviceman s screen In the Technical Settings Screen the serviceman will touch the technician s icon Bd Only the serviceman is allowed to access this technical settings screen by using a personal user code Cleaning the Dispenser s Exterior pa CAUTION Do not spray water or cleaning fluid on the dispenser to clean it Disconnect the electric power cord Wipe the dispenser with a soft clean cloth dipped in a mild soap solution do not use solvents they harm the plastic Wipe dry the dispenser with a soft clean and dry cloth 40 In Case of a Problem The problem The screen is not lit No water flow Water is not cold enough Water is not hot enough
21. he filter housing so that the SODAX icon embossed on wailitake few minutes The container may fill up a number of times the filter will face upward and forward e Using one hand press the filter housing while using the other hand to lock the handle e Touch the NEXT screen button to reset the filter service life counter SETTINGS REPLACING PART Filter Touch the NEW FILTER screen button to Sine handie reset the counter Bove old filter Touch the NEW FILTER screen button to Insert new filter and reset and start the service life counter press on NEW FILTER lt Touch the NEXT screen button to continue Y New Filter Used Filter Once the filter has been thoroughly rinsed the dispenser system will automatically display the dispensing screen Preparing the Filter s Initial Rinse Following the filter replacement the new filter must be rinsed prior to use Place a large container under the spout then press NEXT ty AA Place a 3 liter capacity water container under n A the dispenser s spout 35 36 Replacing The CO2 Bottle X1 An empty CO bottle Indication is displayed by a yellow circle on the Soda Water glass icon The yellow circle will disappear only after a new CO bottle has been installed in the dispenser and the soda glass icon will be touched The Technical Settings Screen To access the technical settings screen touch the Technical Screen icon ES on the SETTINGS display Empty CO
22. ld protection icon Bid on the Main Display Touching this icon disables momentarily the child protection feature The hot water icon will be highlighted and enable dispensing of hot water by touching the HOT icon l The child protection feature will reactivate 20 second after the dispensing of hot water ended MY CUP Dispensing Feature The Settings Screen Select this dispensing option to open a new display enabling you to identify the pre set drinking glass volume and temperatures There are four options for the MY CUP feature See MY CUP The SETTINGS display screen contains six icons which represent the main functions that may be Dispensing Soda Water only for X1 set and customized to meet your personal needs and preferences Touch and hold the soda water icon to dispense the required volume Automatic dispensing of a Date amp eae preset soda water volume is not available Child Safety Time Temperatures When the soda water reservoir is empty a warning will be displayed Wait until the soda water reservoir is filled and the CO gas is Soda tank is filling es ee injected into the reservoir The water Please wait Ea dispensing display will reappear SETTINGS When the CO bottle is empty and no gas can be injected into the soda water reservoir a massage will display advising you to renew CO2 bottle is empty please the CO bottle See the CO bottle replace it replacement instructions on page 37 water supply language Tech sel
23. ltage should comply with the technical data of the machine Do not let the mains cord hang over the edge of a table or counter or touch hot surfaces Never immerse the machine mains plug or mains cord in water danger of electrical shock Never direct the hot water towards body parts danger of burning Do not touch hot surfaces Use handles and knobs Remove the mains plug from the wall socket Ifa malfunction occurs If the machine will not be used for a long time Before cleaning the machine Pull on the plug not on the power cord Do not touch the mains plug with wet hands Do not use the machine if the mains plug the mains cord or the machine itself is damaged Do not make any modifications to the machine or its power cord Only have repairs carried out by a service centre authorized by Sodax to avoid a hazard This machine is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety Children should be supervised to ensure that they do not play with the machine m CAUTION The machine is for household use only It is not intended for use in work environments Always put the machine on a flat and stable surface Do not place the machine on a hot plate directly next to a hot oven heater or similar source of h
24. mended due to the electricity costs and the fact that is shortens the screen life Adjusting the Operating Screen Lighting SETTINGS Light settings OY To set the screen lighting ON or OFF touch the first icon on the left g Choose if screen should light l M inuosiy To keep the screen continuously lit touch the ON bulb icon Touch the Confirm screen button to continue CONFIRM To cancel this feature touch the OFF icon Please Note Keeping the screen lit at all times increases electricity costs and shortens the screen s service life 38 Periodic Rinsing and Sanitation Once every few months depending on the water scale content in your area or if the dispenser was not used during the preceding 72 hours we recommend to rinse and sanitize the internal tanks and piping of the dispenser Touch the Technical Screen icon in the Settings screen Touch the cleaning icon on the Technical Screen to activate the dispenser s rinsing and sanitation program Follow the instructions displayed on the screen Preparing for the rinsing and sanitation Place a 3 liter container under the dispenser spout Place a large container under the spout then press NEXT 3 ai Touch the NEXT screen button to begin the rinsing and sanitation program The filling and rinsing process of the cold hot and soda water reservoirs is automatic and Please wait while i EE ic claaned It lasts for approximately 10 minut
25. menu access the temperature setting menu In the Temperature Settings display touch MYTEMP Baby Touch the temperature setting icon to access the right arrow to raise the temperature or the the temperature setting menu left arrow to lower it aee me Touch the CONFIRM screen button to confirm the set temperature VOLUME TEMPERATURE Setting the MY CUP Feature SETTINGS Touch the EU icon on the SETTINGS display to access the volume and temperature of the MY CUP feature i ha Setting the Water Volume for a Baby Bottle Place a baby bottle under the spout and touch the bottle icon Ky Keep your finger on the icon while water is dispensed into it When the desired level is reached lift your finger off the icon Dispensing will stop and the CONFIRM screen button will appear SETTINGS Volumes and Temperatures Touch the MY CUP icon to access the setting of the personal preferences menu eee ee SETTINGS MyTemp bottle volume Touch the CONFIRM screen button to save and continue or repeat the steps for a You may set the volumes and temperatures i l different volume for 4 persons including a baby s bottle C CONFIRM 25 26 Setting the Water Temperature for the Baby Bottle SETTINGS MyTemp CONFIRM In the Temperature Settings display touch the right arrow to raise the temperature or the left arrow to lower it Touch the CONFIRM screen button to confirm the set temperature
26. n DO NOT PRESS on an icon ora screen button Just touch the icon or screen button with your forefinger Touch the icon briefly to operate turn on turn off a feature Hold your finger on the icon to continue the activity you selected for as long as your finger is on that icon Electric Power Connect the power cord to a 230 Vac household electric socket protected by a residual current circuit breaker see page 43 Do not route the power cord around sharp edges or hot items and do not place itina humid environment DO NOT touch the power cord and or the plug with wet hands Locating the Dispenser Place the SODAX X1 X10 dispenser on a firm smooth horizontal surface such as the kitchen counter away from heat generating sources Grills Ovens etc DO NOT shake the dispenser when moving it around DO NOT expose the dispenser to temperatures lower than 0 C The water in the dispenser system may freeze Using the Dispenser Using the dispenser for purposes other than dispensing water using a faulty dispenser or a dispenser with a damaged UV lamp holder is dangerous UV radiation even in small doses may escape and harm your eyes and skin Read the safety instructions before replacing the UV lamp see page 34 Overview 2 3 4 1 Top cover 5 Water reservoir 9 UV lamp 2 Main Display 6 CO bottle only X1 10 Water inlet port 3 Water spout 7 Filter housing opening 11 Electric Cord handle 4 Drip tray 8 Filter
27. or turn it off touch the ia icon in the Settings and Clock Options screen To set the SLEEP mode change or cancel this feature touch the PJ icon in the Settings and Clock Options screen To set the times for the SLEEP WAKE UP mode touch the ON screen button The icon will be highlighted to indicate the feature is active To set the starting time of the SLEEP mode touch the up or down arrows on the left side of the display Every touch advances reverses the reading by one numeral Touch and hold the arrows to advance reverse faster To set the WAKEUP time touch the up or down arrows on the right side of the display Every touch advances reverses the reading by one numeral Touch and hold the arrows to advance reverse faster Touch the CONFIRM screen button to save the setting and continue Please Note The clock will reset to 12 00 noon following a power shortage or the disconnection of the dispenser from the electrical system You will have to reset the times previously selected 22 Setting the dispensed Water Volumes and Temperatures This function enables you to set the characteristics which suit the multiple users personal preferences The automatic water dispensing may be set in accordance with the glass volume and the desired temperature You may also set the carbonation level strength of the soda water only for X1 You may set the exact water volume that will be dispensed into a glass by bri
28. plastic wrapping and insert the cartridge into the filter housing 2 Screw the adaptor onto the CO bottle only for X1 Pull up the CO handle and insert the COz bottle in its place only for X1 3 Install the bottle adaptor assembly by rotating it a quarter turn clockwise only for X1 4 Insert the UV lamp in his quarters turning slightly until it reach the limit stop with the technical roof See from page 33 to page 37 for more details 10 P re p a ri n g th e S O D AX X 1 X 1 0 fo r Aan a cartridge from the plastic Pull the handle i y and insert 2 wrapping oO p e rat n new filter l Pull up the grey handle l The filter housing will pop up Insert the filter cartridge into the filter EE housing Following the indications on the CAUTION _ direction of mounting maintaining the The dispenser s heating amp cooling systems will be enabled ready to operate only after the upward arrow installation and sanitation procedures are completed This is to insure the proper sanitation of the Push and hold down the filter housing system before its first use See page 14 for more details ale i belo een tiie r place Installing the CO bottle only X1 BA CAUTION T hardie l Screw the adapter on the COz bottle see The Main Display is a digital touch screen DO NOT press the icons or the screen buttons and mount CO2 tank the bottle replacement instructions on into unit lt J page 37 Pressing damages the s
29. replace the old ones that must not be used again When connecting the dispenser to the domestic water supply system e The distance between the dispenser and the connection point should not exceed 5 meters 16 feet e The water supply system pressure should be between 2 5 3 5 bar 0 25Mpa 0 35Mpa e Ifthe water pressure is not within the recommended range it will be necessary to install a pressure regulator between the water supply outlet and the dispenser s inlet and set it to 3 bar e An interception valve ball type shut off faucet and a non return valve must be installed between the SODAX X1 X10 dispenser water inlet and the water system The faucet should be located in an easily accessible position Fittings and pipes for connection to water mains must be certified for food compatibility All the pipes and fittings provided have to comply with the above mentioned features Optional accessories such as filters pre filters to be assembled on the water mains after the interception valve must be certified for food compatibility EE CAUTION The water supply plug of the water dispenser must be made up of an interception valve tap and a non return valve For a good functioning of the dispenser the water mains must satisfy the following the characteristics no overpressure pressure values according with the dispenser requirements Installing the consumable components 1 Remove the filter cartridge from protective
30. screen And run water for 2 3 minutes Touch the cold water icon E on the dispensing mode screen And run water for 2 3 minutes Replace the filter Storing the Dispenser If the dispenser will not be used for a considerable period we recommend to store it in its original carton in a dry environment Store it in a dry place out of the reach of children Keep it protected from dust and dirt Store above 2 C room temperature yN WARNING The manufacturer will not be liable for any damage or fault caused to the Sodax X1 X10 dispenser as a result of any of the following incorrect use of the dispenser not in accordance with the intended purposes or not in accordance to the User Guide e Use of the dispenser with a faulty UV lamp housing e Problems caused by water scale deposits Operating the dispenser systems without water damaging the pump and heating element Cleaning the dispenser s exterior with solutions containing chemicals solvents Spraying the dispenser s exterior with water or other liquids Tampering with the power cord and or any parts of the dispenser Repair service of the dispenser by non authorized persons service centers Use of non genuine replacement parts Storage or use of the dispenser outside of the operating temperature range 15 C to 45 C The manufacturer s warranty coverage will be deemed null and void in any of the above instances 42 Technical Specifications Sodax X1 Dispenser
31. se supervision is necessary when the appliance is used by or near children Unplug from outlet when not in use and before cleaning Allow to cool before putting on or taking off parts and before cleaning the appliance Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner Return appliance to the nearest authorized service facility for examination repair or adjustment The use of accessory attachments not recommended by the appliance manufacturer may result in fire electric shock or injury to persons Do not use outdoors Do not let cord hang over edge of table or counter or touch hot surfaces Do not place on or near a hot gas or electric burner or in a heated oven Always attach plug to appliance first then plug cord into wall outlet To disconnect turn any control to off then remove plug from wall outlet Do not use appliance for other than intended use Save these instructions CAUTION 1 This appliance is for household use only 2 Any servicing other than cleaning and user maintenance should be performed by an authorized service center 3 Do not immerse machine in water 4 To reduce the risk of fire or electric shock do not disassemble the machine 5 There are no parts inside the machine serviceable by the user 6 Repair should be done by authorized service personnel only 7 Check voltage to be sure that the voltage indicated
32. ssage indicating the termination of the filter s service life eyes and skin will display The water dispensed will no longer meet the specified filtered water quality of the e Prior to replacement of the lamp disconnect the dispenser from the electric supply SODAX X1 X10 socket e Do not touch the new bulb with bare fingers Hold the lamp by its plastic handle e Inspect the lamp housing in the dispenser for damage or cracks e If damaged cracked Contact the service department 33 34 Replace the filter on schedule Rinsing sanitizing the filter To clear the warning and return to the e Touch the NEXT screen button to start the initial rinsing process dispensing screen touch the NEXT screen button The rinsing process will last approximately 2 minutes Water slightly darkened will pour Please wait while out of the dispenser into the water container eeeneyeecorc It This water contains minute carbon particles embedded in the filter Once the container has filled up you may pause the rinsing process by touching the pause icon W Filter replacing date expired For keeping purified water replace filter Replacement Procedure e Remove the top cover and pull the filter housing handle up The filter housing will rise and its Return the empty container to its former opening will be exposed position and touch the continue icon to e Remove the used filter eae a renew the rinsing e Unwrap the new filter and insert it into t
33. the dispenser by lifting it out by the handle Fill it and reinstall the reservoir in the dispenser Replace the cover and touch the NEXT screen button to confirm and continue Replacement of Consumables Replacement Procedure e Remove the top cover e Pull the lamp straight up and remove from the dispenser The UV Lamp e Unwrap the new bulb Be careful not to touch the glass with bare fingers e Insert the lamp and press it into its socket A slight twist may be required to align the lamp with The function of the UV lamp is to eliminate bacteria which may be found in the water The UV its socket lamp life span is one year on the average Its life span may be longer than one year However the radiation efficacy of the lamp and the bacteria elimination efficiency are gradually reduced In SETTINGS REPLACING PART UV Lamp Touch the NEW UV LAMP screen button order to maintain the optimal purified water quality replace the UV lamp once a year STE handle to reset the lamp service life counter Remove old lamp Insert new lamp and press on NEW UV LAMP Two weeks prior to the scheduled replacement date a warning is displayed on the screen indicating that the lamp should be The UV Lamp has almost expired replaced soon This warning will reappear any Please replace it as soon as i possible time a dispensing icon is touched AJADA IRE W A SNIN New UY Lamp 3 Used UY Lamp Press REPLACE to proceed with the r
34. ting the Energy Saving Mode SETTINGS Clock options To access the Energy Savings mode display touch the icon in the SETTINGS Clock Options screen aA w The Energy Saving mode is intended to save on electricity costs during periods when the dispenser is not in frequent use The hot water temperature will be lowered to 60 C To return to the boiling water function touch the EXTRA HOT icon and wait for the boiling to end SETTINGS Energy Saving Standby Mode You may select automatic timing to activate this feature T TTET The Energy Savings mode will activate 30 After 60 minutes The Energy Savings mode will activate 60 minutes after the last use of the dispenser After 120 minutes The Energy Savings mode will activate 120 minutes after the last use of the CONFIRM d i spe nser To disable this feature altogether touch the OFF icon The icon will be highlighted Touch the CONFIRM screen button to save the setting and continue When the Energy Saving mode is activated the display will be darkened displaying only the time Touching the screen will reopen the water dispensing display 21 minutes after the last use of the dispenser Setting the Sleep Wake up Mode The SLEEP MODE is designed to saves electricity consumption during night time when dispenser is not in use In this mode the heating element is disabled cancelling the automatic boiling and the display is darkened To access the SLEEP mode
35. uction and filtration level have been specified using a genuine Sodax filter cartridge consumables and thus represent a standard level Most effective and performing filters could be provided in the future Manufactured by SODAX S r l via Caponnetto 21 42122 Rubiera Italy SODAX Srl confirms that the X1 X10 soda amp water dispenser manufactured by the SODAX company in Italy complies with the requirements of the Israeli Standard No 1505 for Water Quality and with the requirements of CE and other International standards All electrical components and materials used in the production of these dispensers comply with international standards for use in a food drinking water environment The dispenser s chemical purification process absorbs chlorine Class I at least 75 and provides Class B microbe purification against volatile organic compounds VOCs Machine disposal Disposal Do not throw away the machine with the normal household waste at the end of its life but hand it in at an official collection point for recycling By doing this you help to preserve the environment The packing materials can be recycled Machine unplug the machine and cut the power cord Deliver the appliance and power cord to a service center or public waste disposal facility This product complies with EU directive 2002 96 EC The symbol on the product or on its packaging indicates that this product may not be treated as household waste
36. y PieGaOnS Secvare lt sccrens oucenensctutenthcaiiarsessauenesand ease aadutrecstavertadeedeesansiventaateersets 7 OEIC E E EEE A EE E ecient uate sree E E E E E ETT 8 Installing your SODAX X1 X10 Water Soda DISPENSEL cc cece cece eee eee eeeeeeeaeeeeeeeeaeeens 9 Preparing the SODAX X11 X10 for Operation cccececeesceeceeeseeseeeeseneenseeneeeseeeeseneennaes 11 Wailer Dispensing DISDIAY spccssacnodcseannaccmeesadnauoennedsnsenadadinaanaadnneaeaeunmssenunensauanteanaandns 16 The SeHINGS SCICEH amniminnsianeehenrstitwestite E E A E 18 Replacement Of CONSUMADICS aerden einstein oineriniiiieten Slirasante 33 Replac no THE CO BONG orrien oirinn e AE O EE NOEN 37 The Technical Settings SCreen neni E 38 WCs ora PrOD coinssnrnmnen san E Eaa 41 Technical Specifications SODAX X1 X10 Dispenser 2 2 ccc cece eee e eee eee eee e nena 43 KACIN SPO Sa aa E E E E E E E OEE 44 4 Safety instructions This machine is equipped with safety features Nevertheless read the safety instructions carefully and only use the machine as described in these instructions to avoid accidental injury or damage Keep this user manual for future reference The term WARNING and this sign warn against possible severe injuries danger to life and or damage to the machine The term CAUTION and this sign warn against slight injuries and or damage to the machine WN WARNING Connect the machine to a wall socket which is properly wired Its main vo
Download Pdf Manuals
Related Search