BC202/50 Guide
Contents
1. BRAHLERICS CDS200 Il Microphone Control Panel BC202 50 i coszoot Operating instructions Version 1 01 BC202 50 CDS200 II Printed in Germany Should you have some questions regarding this manual please contact Br hler ICS Konferenztechnik International Congress Service AG Auf der Alten Burg 6 D 53639 K nigswinter Germany Tel 49 2244 930 100 E Mail sales braehler com You will find further information about our products on the Internet at www braehler com 2007 BR HLER ICS AG K nigswinter All rights reserved especially also partly the translation reprint reproduction through copying or other similar methods BRAHLER ICS reserves the right to make changes without notice Operating instructions CDS200 Il BGE BC202 50 doc Mar 08 CDS200 II BC202 50 C lt J DANGER OF ELECTRIC SHOCK DO NOT OPEN DEVICES Do not open housing with mains cable connected Maintenance operations may only be done by qualified personnel Our equipment and installations have been built and tested according to the latest state of the art In general conditions they do not require any special maintenance However please be aware of the following M Positioning secure and stable position of the equipment M Ventilation operate equipment with proper ventilation Avoid heat sources such as heating radiators etc Mains connection pass all power cables so that they will not be damaged C2. DE 1 AUT mode is activated LED 3 lights AUT number 13 the number of same time active microphones is adjustable from 1 to 6 AUT alone the number of same time active microphones is indicated 4 FLOAT only in AUT mode In connection with MODE 1 FLOAT mode is set x number of microphones 1 to 6 If x slots are occupied then the next delegate pressing its microphone key switches off the first microphone of the active group AUT 1 6 5 NEXT only in AUT mode In connection with MODE 1 activating the NEXT mode number of microphones 1 to 6 If a speaker switches off his microphone then the next microphone of the request list is switched on automatically Pressing NEXT alone the next microphone of the request list is switched on 10 Copyright by Brahler ICS CDS200 II BC202 50 6 11 12 13 MAN Manual In connection with key MODE 1 the MAN mode is set The microphones are switched by means of the keys 13 Speaker requests are indicated by flashing of the appropriate key LED Note The delegate is not able to switch on the microphone by himself NoP Activating the allocation of the chairman All other microphones are switched off Pressing NoP and a number key 13 will determine the chairman PRIO If a chair of the meeting is determined before in connection with MODE 1 the chair of the meeting has a priority treatment l e by pressing this key all other microphones are sw
3. RAHLER ICS We recommend using this system for long term protection and care Copyright by Brahler ICS 7 BC202 50 CDS200 II General Please keep this manual together with the CDS200 II equipment If you pass on the unit to other parties please include this manual Please read the manual carefully taking special care when you see this symbol as it A indicates important information i The warranty will expire if you cause defectives by inappropriate use or handling of the unit BRAHLER ICS advisory service is consulted for planning installation and i Although CDS200 Il is a simple and reliable system it is recommended that the commissioning 8 Copyright by Br hler ICS CDS200 II BC202 50 3 System description CDS200 II controls up to 800 microphones centralized switched by technician or decentralized switched by delegates All network components are connected in single cable technology Length of cabling is not critical though it is limited by the power demanded by increasing numbers of microphones As many microphones as desired can be connected simultaneously using pairs of cables without loss of performance AQ cable Central Control Unit BC202 50 A9 cable E te Ni N DC10 Up to 160 units in 4 rows TM58 DPS202 Delegate Units DC10 and EDC10 3 1 System functions The BC202 50 is a microphone control panel for the CDS200 II system to control up
4. able connections avoid trip traps Liquids avoid penetration of liquids into the housing RA RA ARK Power sockets operate equipment only with power sockets that are connected to ground according to the relevant specifications and regulations Warning Never expose equipment to rain or humidity Rough handling of the equipment such as strong shocks or vibrations may result in damages Inappropriate handling and storage which does not conform to the operating instructions may also lead to equipment damages Copyright by Br hler ICS 3 BC202 50 CDS200 II 4 Copyright by Brahler ICS CDS200 II BC202 50 Content 1 about this manWal e es eicere iere eene recto e ceo a roa ce rau Dennis 6 Side 6 2 Important remarks nenne 7 For customers in the EU and in the DS see 7 SEN anne inserieren RER 7 Installation rinnen EE e dn M HE URP CEPR 7 MINOR FERSKE Ee Uc uH ME E 7 aoro qp PN 7 MAGNE aneinander 8 3 System descrlptl n 2 rrt ier terere Here 9 3 1 System functions oet HM EP 9 Su Oper allOn tee tetro emet e ast echec tube ied efe kt da etc dendi re Entre eg 10 3 2 1 Operating Control Panel aneinander sa aa sein 10 3 2 2 Rear side and DIP Switch Setting cccsssccssseccesccceesccesccceesceeeescceeseceeseceesseeeeees 12 4 Troubleshooting iieis suirera erroris sethtaneitacustacdicanaaeacccsshuviasaunansstwoadentaxsicbeuder
5. erisieninacsins 13 irai 14 5 Contact addresses leer een hun 17 Copyright by Br hler ICS 5 BC202 50 CDS200 II 1 about this manual Symbols The meaning of the symbols and fonts used in this manual Indicates an important note if not minded the functionality of the unit the security of your data or your health are put at risk Supplementary information remarks and tips follow this symbol Ej P Text which follows this symbol describes activities that must be performed in the order 2 shown Texts in bolded letters require your special attention 6 Copyright by Br hler ICS CDS200 II BC202 50 2 Important remarks For customers in the EU and in the USA The equipment is complying with the standards of the CE regulations These standards are specified to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment The equipment can radiate radio frequency energy and if not installed and used according to the user manual it may cause harmful interference to radio communications Any changes or modifications which are not explicit approved in this manual could void your authority to operate this equipment The equipment must be connected to ground Safety Check that the operating voltage of the unit is identical with the voltage of your local power supply If a voltage conversion is required consult your BRAHLER ICS dealer or quali
6. fied staff Should any liquid or solid object fall into the housing unplug the unit and let it check by qualified staff before further operations Unplug the unit from the power outlet or set the mains power switch to OFF if it s not used for several days To disconnect the cord pull it out holding the plug Never pull the cord itself Installation Allow proper air circulation to prevent internal heat accumulation Do not place the unit on a surface that may block the ventilation holes Do not install the unit in a location near heat sources or in a place exposed to direct sunlight excessive dust humidity mechanical vibration or shock Do not install the unit when it is changed from cold outside to warm inside In this case wait approx 1 hour until temperature is even tempered Cleaning To keep the housing in its original condition periodically clean it with a soft cloth Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution Never use organic solvents such as thinners or abrasive cleaners as these will damage the cabinet Repacking If possible save the original shipping carton and packing material they will become useful if you ever have to ship the unit In this case please keep the manual and the unit together For maximum protection re pack the unit as originally packed by the factory If not supplied with the equipment a complete transport and storage box system is available from B
7. itched off continuously or occasionally The VIP microphones are excluded VIP Changing to the VIP operation mode the LED of key 9 is on Pressing VIP and a number 13 will allocate this microphone as VIP Pressing and holding VIP alone All assigned VIP microphones are indicated Note VIPs can switch on themselves independently in both AUTx and in MAN mode if one of the 2 VIP slot is free i e 2 VIP of microphones can be active at the same time TEST In connection with MODE 1 changing to the test mode Pressing TEST the first microphone to be tested is determined the next pressed number key determines the last microphone to be tested and starts automatically the test Within the selected range the microphones are switched off and on Note Pressing again MODE 1 in connection with TEST will stop the test procedure CLEAR In connection with MODE 1 all microphone requests are cancelled all flashing LEDs change to off CLEAR number deletes the request of the selected microphone Microphone keys with associated LEDs on status is shows by LED Copyright by Brahler ICS 11 BC202 50 CDS200 II 3 2 2 Rear side and DIP Switch Setting 14 DIP switch for the definition of the unit ID 246 or 247 of the control console BC202 50 i Please notice Especially in shared operation of BC202 50 and BC202 100 Unit ID 246 The range of microphone number is 1 to 50 1 to 100 with BC202 100 Unit ID 247 The range of mic
8. nce kindly take care that the airway bill mentions a return for repair as well as b the customs tariff code number of the goods which will be advised by us together with the return of material authorization number Any expenses duties and taxes incurred by deviant handling will be charged to the sender BC202 50 CDS200 II 16 Copyright by Brahler ICS CDS200 II BC202 50 6 Contact addresses Head office Germany Brahler ICS Konferenztechnik International Congress Service AG Wahlfelder M hle 3 D 53639 K nigswinter P O Box 3264 D 53627 K nigswinter Tel 49 0 2244 930 0 Fax 49 0 2244 930 450 http www braehler com Rental service Wahlfelder M hle 3 D 53639 K nigswinter Tel 49 0 2244 930 200 Fax 49 0 2244 930 430 E Mail rental braehler com Sales Auf der Alten Burg 6 D 53639 K nigswinter Tel 49 0 2244 930 100 Fax 49 0 2244 930 450 E Mail sales braehler com For your nearest representative in 85 countries please contact our sales department Tel 49 0 2244 930 100 Fax 49 0 2244 930 450 E Mail sales braehler com Copyright by Br hler ICS 17 BRAHLERICS Phone 02244 930 0 www braehler com BGE BC202 50 doc Mar 08 04 0460
9. repair wish you may have Please note that only returns with the proper and complete paperwork can be dealt within time A detailed fault description will reduce costs and period of repair Please contact us before you return equipment in order to find the most efficient way of sending RMA number Article description Serial no Code Delivery note no Invoice no Reason for return Fault description Company Contact person Phone Fax Notes Comments Transport damages have to be reported immediately to the responsible forwarding agent Remarks for Non EU customers Please add to each return a delivery note or a proforma invoice addressed to Br hler ICS AG K nigswinter with following statements Reason for return repair or credit note Exact declaration of the goods exact no of pieces article no model serial no Price which was invoiced by us better our invoice no with date Return shipments from Non EU countries have to be sent either by air freight to Cologne airport to the attention of Calenberg Oversea Logistics Mrs Taxacher Welser Str 8 51449 K ln Tel 49 2203 3592 838 or by the following courier services DHL Express Federal Express TNT Worldwide Express UPS Express Please do not use any other courier service because only the four companies mentioned above perform return shipments To enable quick and cost efficient customs cleara
10. rophone number is 101 to 150 101 to 200 with BC202 100 15 Socket S8G GJ Connection to further microphones in the chain 16 Connection cable to previous microphone 1 2 Copyright by Brahler ICS CDS200 II BC202 50 4 Trouble shooting Error description Error cause Error solution After system start there is no response of the panel BC202 50 The connecting cable to the panel is not connected Connecting the cable to the prior microphone or to the Central Control Unit DPS202 After system start there is no response of the panel BC202 50 Short circuit in the connection cable Check the cable to correct function After system start there is no response of the panel BC202 50 The corresponding out of the DPS202 unit is defective The corresponding LED will light at the DPS202 The line is to check properly After the system start microphone numbers appear twice The ID of the control panels are not unique Make a correction on DIP switches Copyright by Brahler ICS 13 BC202 50 CDS200 II 5 Warranty BRAHLER ICS allows for the CDS200 II products a warranty period of 24 months from date of delivery for faulty materials and or manufacturing faults The warranty does not include rechargeable or disposable batteries misuse negligence breakage wrong installation use outside the existing rules and any unauthorised modifications BRAHLER ICS reject
11. s any guarantee if the safety label with the serial number is removed BRAHLER ICS declares itself to agree to exchange or repair defective components due to faulty materials or manufacturing dependent on following procedure 1 The client declares that the fault is not due to empty discharged wrongly inserted or faulty batteries 2 Before sending the faulty product back to the company please obtain an RMA Return Material Authorisation number An RMA can be obtained by contacting us at the details below Phone 49 0 2244 930 100 or email sales braehler com 3 You may send the defective product free of charge to refer to the service form BRAHLER ICS Konferenztechnik International Congress Service AG Auf der Alten Burg 6 D 53639 K nigswinter Germany 4 Should it turn out that the fault was caused through inattentiveness or inappropriate use the service and shipping charges will be added to the clients account 14 Copyright by Br hler ICS BRAHLERICS Material return shipments for repair service or guaranty purposes please send to BRAHLER ICS Konferenztechnik AG Auf der Alten Burg 6 D 53639 K nigswinter Germany Phone 49 0 2244 930 100 Fax 49 0 2244 930 450 Service form Dear customer Please ask our sales staff for the RMA number Return of Material Authorization Without RMA number a treatment is not possible Please always include this service form fully completed with any complaint or
12. to 50 microphone units Operation is possible both with and without additional PC control The BC202 50 can be connected anywhere in any of the microphone lines This means that control can take place at the technician or chairman secretary positions Different microphone operating modes AUT3 6 MAN PRIO VIP can be selected for different conference situations e AUT omatic mode in connection with FLOAT and NEXT Number of simultaneous active microphones is adjustable from 1 to 6 e MAN ual mode All microphones are switched on and off by corresponding keys Requests are displayed by a blinking LED in the keys with the first request blinking faster e PRIO Priority operating from the chairman s desk The chairman can switch all microphones off continuously or occasional excluding VIP assigned microphones e VIP Priority functions for special microphones which can be switched on at any time even in MAN mode Copyright by Br hler ICS BC202 50 CDS200 II 3 2 Operation 3 2 1 Operating Control Panel BRAHL LIMIT SELECT 1 MODE Key for switching to another mode of operation For this purpose press and hold this key as well as one of the following mode keys 2 AUT In connection with MO
Download Pdf Manuals
Related Search