nT-A3800 NanoPC User`s Manual
Contents
1. nT A3800 NanoPC User s Manual Trademark All trademarks are the property of their respective owners Version User s Manual V1 1 for nT A3800 NanoPC Symbol description gt rS JN Caution refers to important information that can help you to use NanoPC bet ter and tells you how to avoid problems WEEE The use of this symbol indicates that this product may not be treated as household waste By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could other wise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased this product CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS All rights reserved All trade names are registered trademarks of respective manufacturers listed All images are for reference only please refer to the physical product for specific features Safety Notice Before using this product please read the below safety notice carefully this will help to extend the product s lifecycle and work normally When NanoPC is working please make sure its ventilation system is working The power adapter is dissipating heat during normal use please b2. 4 Refresh Load Driver 20 9 In the hard disk size screen you can click the new button to create partitions as you need In this example we are creating a 70GB partition to install Windows Make your modifications Where do you want to install Windows Total Size 160 0 GB F SA 0 Unallocated Space 4 Refresh PA delete Load Driver a Extend and click Apply To ensure that all Windows features work correctly Windows might create additional partitions for system files So you will see a 100MB partition reserved by system after you create a partition Select the 70GB partition and click Next to continue lt lt Disk 0 Partition 1 System Reserved jee Disk 0 Partition 2 lt p Disk 0 Unallocated Space fp Refresh A Delete F Format Load Driver BD Extend 21 10 The setup program will then start to install Windows 7 8 on your hard disk During the installa tion your computer will restart several times Installing Windows That s all the information we need right now Your computer will restart several times during installation of Copying Windows files Windows files 1 Installing features Installing updates Completing installation 11 When the installation is complete setup will prepare your computer for it s first use You can then follow the steps to select system settings create an account set a p
3. C 2012 American Megatrends Inc NVETIWACNEWecemsieemsiceeiing Save amp Exit Exit system setup after saving The changes Discard Changes and Exit Save Changes and Reset Discard Changes and Reset Save Option Save Changes Discard Changes Restore Defaults Save as User Defaults Restore User Defaults Boot Override F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Version 2 15 1231 Copyright C 2012 American Megatrends Inc gt Save Changes and Exit If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to save your changes and exit select No or lt ESC gt to return to the menu gt Discard Changes and Exit If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to exit setup utility without saving your modifications select No or lt ESC gt to return to the menu gt Save Changes and Reset If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to save your changes and reset computer select No or lt ESC gt to return to the menu gt Discard Changes and Reset If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to exit setup utility and reset computer without saving your modifications select No or lt ESC gt to return to the menu gt Save Changes If you select this o
4. key to enter BIOS Setup if you want to change the first boot device for installing the OS 5 When the installation windows popup Click Next to continue and click Install now button to start the setup 6 When the license terms appear choose accept and click Next to continue 19 7 It will then ask you to select the installation type Click Custom advanced to install a new copy of Windows Which type of installation do you want running We recommend backing up your files before you proceed Custom advanced Install a new copy of Windows This option does not keep your files settings and programs The option to make changes to disks and partitions is available when you start your computer using the installation disc We recommend backing up your files before you proceed Upgrade Upgrade to a newer version of Windows and keep your files settings and programs The option te upgrade is only available when an existing version of Windows is Heip me decide 8 The setup will the display the hard disk partitions 160GB in this example of your system If there were other systems such as Linux installed previously you need select them and click Drive options advanced to delete them When all partitions are clean setup will display the biggest size of your hard drive Where do you want to install Windows k Disk 0 Unallocated Space 160 0 GB 160 0GB
5. Disk M 4 4X4 85mm 1X This chapter introduces NanoPC s outlook m Top View m Front Side View C Back Side View C Bottom View 1 1 Top View H 190mm Iaeooooooooooooooooooooso SNYl N O Ol o WWGE 1 Kensington Lock Attach a Kensington security system or a compatible lock to secure your NanoPC 1 2 Front Side View a hy Goes oe Co ITE wwpz Headphone Port Connects to a headphone 7 Microphone In and SPDIF In Connects to a microphone or playback devices with Port optical connectors 3 5mm jack SPDIF function requires additional adapter and adapter cable Multi Function Card Reader Support SD SDHC MS MS Pro MMC memory cards 4 USB 3 0 Ports Connect to USB devices Caution Before using it you need to install the AS Media USB3 0 driver in the Driver CD Suspend Button Enter suspend mode in operating system Power Button with Turning the power on off Indicates system states Integrated LED Indicator 2 1 3 Back Side View O ee ED Ca J Q ji 4 Da ji 1 USB 2 0 Ports Connects to USB devices Display Output Port Connects to display device HDMI Port Connects to HDMI audio and video Network Port Standard RJ 45 network port Line Out and SPDIF Out Port Connects to powered analog speakers or record ing devices with optical connectors
6. 2 Local Update Backup This page can back up your system BIOS You can click Backup BIOS and key in a file name then click Save to finish the backup operation The extension of this backup file is ROM for AMI BIOS Make sure you can remember the file name together with the directory which it is stored prevented that you may need them to recover your BIOS later See Name Date modified iy Ji PerfLogs 2009 7 14 11 20 fi Ji Program Files 2009 7 14 15 46 Key ina BIOS name Program Files x86 2012 1 7 12 25 Ji Users 2012 1 7 11 59 Ji Windows 2012 1 7 125 m Filename FROM Seve Saveastype ROMFIeCROM g Cancel l A Click here 1 3 Local Update Update This page helps you to update your BIOS from a local file After click Update BIOS An alert message will be displayed to ensure if you really want to continue click Yes to confirm A setup wizard will guide you to load a local BIOS file to finish the operation You must remember from which directory to load your new BIOS file with an extension of ROM for AMI BIOS before the setup wizard starts Updating may cause some problems eg the computer restarting may be failed which are not guaranteed by Foxconn s product warranty Are you sure to continue ROM Part 26 2 About amp Help This page shows some information about FOX Wi
7. 3 5mm jack SPDIF function requires additional adapter and adapter cable e Power Input Port Connects to the power adapter 1 4 Bottom View a 2 Oo Sheet Metal NETDVD optional accessary or Magnet Metal Feet can mag netize them to seat firmly There are four Magnet Metal Feet in the package Just align them to the sheet metal on the bottom then they can magnetize the NanoPC easily The feet can seat and protect NanoPC when it is placed on the tabletop I H I In this chapter the placement and the connection of some neces sary peripherals will be introduced I 1 E 1 This chapter includes the following information I m Placement of NanoPC I i m Connection of NanoPC I A I 1 1 1 AN v hs N X S s s s4 s XN SN Sie s 7 s s Ya x x gt s x wy Ss an ik ime a e m s S 5 bet DE ee an a an ra Pa lt 2 1 Placement of NanoPC 1 On the Desk 1 1 You can install your NanoPC in the Seatbase like the right image 1 2 If there is enough space on your desk you can simply put your NanoPC on the tabletop as shown below qT 2 On the Display Back This is the best space saving way 2 1 Use four screws to fasten the Vesa Mount onto the display back easily fast
8. E mode AHCI Mode The Advanced Host Controller Interface AHCI specification describes the reg ister level interface for a Host Controller for Serial ATA The specification includes a description of the hardware software interface between system software and the host controller hardware AHCI provides more advanced features including SATA features but some SATA drives may not support AHCI unless they are labeled with AHCI support in its specification If your motherboard supporting AHCI and you have a SATA device which also supports AHCI then you can select IDE option to have fair performance only PATA SATA level or you can select AHCI to get its best performance AHCI mode is not available under Windows XP please select IDE mode gt Deep Sleep Support This item is used to enable or disable Deep Sleep Support function When entering deep sleep mode system S4 S5 only can wake up from power button gt USB 2 0 Port S3 Wakeup This item is used to enable or disable USB 2 0 Port S3 Wakeup Function gt LAN USB 3 0 Port S3 Wakeup This item is used to enable or disable Onboard LAN USB 3 0 Port S4 Wakeup Function 12 gt Restore on AC Power Loss This item is used to set which state the PC will take with when it resumes after an AC power loss gt Supporting C6 power Loss This item is used to enable or disable C6 power state which is featured in Fusion processors gt Integrated GPU UMA Frame Buffer This item is used
9. IOS Read Only Month month from 1 to 12 Date date from 1 to 31 Year year set up by users Use ENTER TAB to select a field Use or to input the value gt System Time This item allows you to configure the desired time Use ENTER TAB to select a field Use or to input the value The three fields of the setting are lt hour gt lt minute gt lt second gt respectively gt Access Level It displays your current access level If you enter system with a user password it will dispaly User If no password is set or you enter system with administrator password this item will dispaly Administrator 11 Advanced Aptio Setup Utility Copyright C 2012 American Megatrends Inc Ela Advanced ele isiret SENAR Select the SATA Mode Deep Sleep Support Enabled USB 2 0 Port S3 Wakeup Enabled Option LAN USB 3 0 Port S3 Wakeup Enabled 1 IDE Mode Restore on AC Power Loss Last State 2 AHCI Mode Supporting C6 power Loss Disabled Integrated GPU UMA Frame Buffer Auto Select Screen ty Select Item Enter Select Change Opt F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Version 2 15 1231 Copyright C 2012 American Megatrends Inc gt SATA Mode This item is used to set the operating mode of your SATA ports Setting options IDE Mode AHCI Mode IDE Mode This configures the SATA ports to support ID
10. ad the user defaults to all the setup options select No or lt ESC gt to return to the menu gt Boot Override BIOS auto detect the presence of connected devices select the device you want to boot from and press lt Enter gt then the system will directly boot from the selected devices 17 This chapter introduces the Windows installation m Install Windows 7 8 m Install Drivers in Windows 7 8 Make sure you have these ready 1 NETDVD It is an optional accessory If there is no NETDVD in this package you need other purchase an external USB DVD ROM drive 2 NanoPC USB Flash Disk In this package 3 Windows 7 8 Install CD Other purchase Before we continue m Your NanoPC power is off m Connect the NETDVD or USB DVD ROM drive to one USB port of NanoPC and power it on a WiFi card with this product doesn t support Vista operating system a Windows 7 32 bit 64 bit and Windows 8 32 bit can t be installed when Launch CSM is set to Disabled in the BIOS setup 4 1 Install Windows 7 8 1 Connect the Windows 7 8 Install USB Disk or USB DVD ROM drive to one USB port of NanoPC 2 Push power on button to turn on your computer 3 Put the Windows 7 8 Install CD into the NETDVD or USB DVD ROM drive if you use the NET DVD or USB DVD ROM drive 4 Computer will choose the boot device by BIOS default and start loading the files for installing the OS Please press lt Del gt or lt F2 gt
11. aged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Caution Any changes or modifications not expressly approved by the grantee of this device could void the user s authority to operate the equipment RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna s used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co located or operating in conjunction with any other antenna or transmitter End users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance Warning statement for Europe Also put in the manual which directive to fulfil and also which countries to sell the product Example of a text to tell which directive has been fulfilled Hereby Foxconn declares that this nT A3000 series is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC
12. assword etc until the whole process is complete 22 4 2 Install Drivers in Windows 7 8 1 When the Windows 7 8 is completely installed you have to install the necessary drivers before using the NanoPC Connet the USB Flash Disk USB Flash Disk in this package 2 Waiting for a few seconds the main menu will be displayed on the screen Use these options to install all the drivers for your system You must click AMD Chipset Driver to install it first After that you can click One Click Setup and then choose the items you want to install or you can click on each individual driver to install it manually After all the drivers are installed you need to restart your NanoPC then you can start using it 23 This chapter introduces the following information m FOX WinFlash FOX WinFlash FOX WinFlash is a useful utility to backup and update your system BIOS Supporting Operating Systems m Windows XP 32 bit 64 bit m Windows 7 32 bit 64 bit m Windows 8 32 bit 64 bit Using FOX WinFlash 1 Local Update 1 1 Local Update BIOS Information This page lets you know your system BIOS information Minimum BIOS Info 8 Backup BIOS RB Update BOS odbar Show current HED AbouteHelp BIOS information BIOS Size ROM Part Note BIOS Size 16Mb 16M bit 2M Byte BIOS Size 32Mb 32M bit 4M Byte Please refer to the physical motherboard for detail 25 1
13. e sure not to cover it and keep it away from your body to prevent discomfort or injury by heat exposure Please use the power adapter that comes with the product s package wrong power adapter may damage your device Make sure all the peripherals are properly connected before using Na noPC This product should only be used in an environment with ambient temper atures between 0 C and 40 C To reduce the risk of fire use only No 26 AWG or larger UL listed or CSA certified telecommunication line cord Always shut down the computer before installing or uninstalling the pe ripheral which does not support hot plug Disconnect all peripherals before servicing or disassembling this equip ment Please do not disassemble this product by yourself any disassembly not approved by the original manufacturer may result in malfunction and void warranty Risk of explosion if battery is replaced by an incorrect type please dis pose of used batteries according to the instructions Chapter 1 Introducing the NanoPC TOP VIEW eaer sc echices tet ges eas an Eeo ecane ere Ar E iaie Eni aa Front Side WCW s ccaxcceaseneetceti te csncoehs coesaneehiendeeeenrecdieseentothaonteacs Back Side ViGW 0 cccccccceceesecceeeeeeeeeaaeeeeeeeesaeaeseeeeeeeeaeeeeneees Bottom VIEW ssip Ges eter eee Chapter 2 Placing and connecting the NanoPC Placement of NanoPC On the Desk v2 iii ie enanas eee ee S On the Display Back cc cccecceceececeescs
14. en the bracket onto your display 0000 o To install this bracket your display must follow VESA75 VESA100 standard The two groups of holes on your dispaly have different space between and they help you 2 2 Fit the NanoPC into the Vesa Mount with power button locating at the top for easy touch dd Lift up the NanoPC straightly to take it out 2 2 Connection of NanoPC 1 Connect the Monitor Connect a monitor to the NanoPC through DVI connector 0000 o m Please use the customized DVI VGA Adapter that comes with your NanoPC to get a higher resolution on your VGA display m You could have access to display adjustment for some HDTV or HD display connected via HDMI port by using the scaling function in AMD VISION Engine Center a utility which is available after the installation of AMD Chipset Driver And you can initiate this utility by first right clicking on Desktop and selecting it then further choosing Scaling Options Digital Flat Panel in My Digital Flat Panels 2 Connect the USB Devices Connect USB devices to the USB ports of the NanoPC for example mouse and keyboard 3 Connect the Network Cable Connect LAN cable to the RJ 45 port with the other end connected to a hub or switch Hub or e s 4 Connect the Power C
15. nFlash tong Pastor an nore Pomel iS alge SSS gt Local Update T About amp Help FOXCONN WINFLASH FOXCONN WINFLASH Version 1 0 0 0 PackageVersion 1 0 1 5 Show information about Home Page http www foxconnchannel com FOX Wi n Flash Contact Us Technical Support Team Website Copyright C 2011 by FoxconnTechnology Group All Rights Reserved R 27 Statement This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Warning FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protec tion against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruc tions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encour
16. ord Connect the power adapter to the power input port of the NanoPC and push the power but ton to start it Ea E p oo BH a 7 Pd 1 Outlet r I 8 I 1 1 r gt a The power adapter is dissipating heat during normal use please make sure not to cover it and keep it away from your body to prevent discomfort or injury from heat exposure Ps I This chapter tells how to change system settings through the I BIOS Setup menus Detailed descriptions of the BIOS parameters I are also provided You have to run the Setup Program when the following cases I 1 occur I 1 An error message appears on the screen during the system s Power On Self Test POST process l 2 You want to change the default Item settings i A i This chapter includes the following information Enter BIOS Setup m Main A m Advanced m Boot RA y Security n Save amp Exit Qa x Since BIOS could be updated some other times the BIOS information described in this manual is for reference only We do not guarantee the content of this manual will remain consistent with the newly released BIOS at any given time in the future Please visit our website for updated manual if it is available Enter BIOS Setup The BIOS is the communication bridge between hardware and software correctly setting up the BIOS parameters is critical to maintain optimal system performance Power on the computer when the me
17. ption and press lt Enter gt a message will be displayed in the center of the screen Select Yes to save your changes select No or lt ESC gt to return to the menu gt Discard Changes If you select this option and press lt Enter gt a message will be displayed in the center of the screen Select Yes to discard your modifications select No or lt ESC gt to return to the menu gt Restore Defaults Optimal defaults are the best settings of this motherboard Restore Load the Optimal defaults values for all the setup options Select this option and press Enter it will pop out a dialogue box to let you load the defaults Select lt Yes gt and then press lt Enter gt to load the defaults Select lt No gt and press lt Enter gt it will not load 16 By this default BIOS have set the optimal performance parameters of system to improve the performances of system components But if the optimal performance parameters to be set cannot be supported by your hardware devices for example too many expansion cards were installed the system might fail to work gt Save as User Defaults If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to save the changes done so far as user defaults select No or lt ESC gt to return to the menu gt Restore User Defaults If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to restore lo
18. seeessteeteeceeseteeceneeee Connection of NanoPC Connect the Monitor ccccecceecceceeeeeeeeeeeteeeeseceeeeeetee Connect the USB DeVICeS 0 ccecceeceeeeeee eee teteeeeeeeetees Connect the Network Cable ccccsecceceeteeeeeeeeeeetees Connect the Power Cord cceceeeeeeeeeeeeeeeeeeeeeeeeeeee Chapter 3 BIOS Setup Enter BIOS Setup isiviccecesscrecetecaceaccenayeuncesstentavabevectneceedtaesny tee SOCUPILY bc3555 5 20 desdectbdiecnaldesheiseessadagearelieieirns be beadaiorabbaseeeed Save amp Exits cca eee eee le eea ia ea a E aE Ea EEA Chapter 4 Install Windows 7 8 in NanoPC Install WINGOWS 7 8 ciireisseiereiensiroierioi teerien Install Drivers in Windows 7 8 cccccccssesseeceeeeeeeeeeeeeeneeees Chapter 5 Utility FOX WinFlash EO Gall WP Ate acess cos ateces pcazetec vaiceteesanitedaybeonebeneexectteaeeerepesncciece About GSI soeedecsaceedtaycce sabes te adbaeta rateaa sata sn cateeebactivtvadeanasp ie Accessory List Thanks for choosing our products Please check the accessories listed below If there is anything broken or lost please contact with your distributors as soon as possible oJ o Q Screw for VESA Mounting Screw for HDD Support Bracket Screw for Half MiniPCle Card M8 0X9 7mm 4X M 4 7X2 85mm 4X M 4 4X2 85mm 1X NanoPC Acs Screw for Half MiniPCle Half Card Support Bracket USB Flash
19. setting one by one trial and error to find out the best setting for your current system You also can save or discard the changes and exit BIOS setup here 10 Main The BIOS Setup is accessed by pressing the lt DEL gt or lt F2 gt button after the Power On Self Test POST memory test begins and before the operating system boot begins Once you enter the BIOS Setup Utility the Main Menu will appear on the screen The Main Menu provides System Overview information and allows you to set the System Time and Date Use the and cur sor keys to navigate between menu screens Aptio Setup Utility Copyright C 2012 American Megatrends Inc Main EREC BIOS Information Set the Date Use Tab to switch between BIOS Vendor American Megatrends Data elements BIOS Build Date 11 01 2012 15 0109 Embedded Control Version 12 F1 08 System BIOS Version C74F1P01 CPU Information AMD E2 1800 APU with Radeon tm HD Graphics Processor Speed 1700 MHz Microcode Revision 500010d Memory Information Total Memory 2048 MB DDR3 1333 Select Screen Fri 02 2012 Select Item System Time 16 23 15 Enter Select Change Opt Access Level Administrator F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Version 2 15 gt System Date lt weekday gt lt month gt lt date gt lt year gt format Day weekday from Sun to Sat this message is automatically displayed by B
20. ssage Press lt DEL gt or lt F2 gt to enter setup Press lt F11 gt to enter boot menu appears at the bottom of the screen you can press lt DEL gt or lt F2 gt key to enter Setup We do not suggest that you change the default values in the BIOS Setup and we shall not be responsible for any damage which resulted from the change you made Use the arrow right left keys to select a specific function and go to the submenu Each function is explained below Main It displays the basic system configuration such as CPU Name memory size system date time and so on They all can be viewed or set up through this menu Advanced The advanced system features can be set up through this menu Boot Boot features can be set up through this menu You can set the boot device priority and enable Quiet Boot feature here Security The Administrator User password can be set up through this menu to prevent unauthorized use of your computer If you set a password the system will ask you to key in correct password before boot or access to Setup Save amp Exit The optimal performance settings can be loaded through this menu However it may offer better performance in some ways such as less I O cards less memory etc still it may cause problem if you have more memory or I O cards installed It means if your system loading is heavy set to optimal default may sometimes come out an unstable system What you need now is to adjust BIOS
21. to set Integrate Graphics UMA Frame Buffer Size 13 Boot Bootup Numlock State gt Bootup Numlock State This item is used to select the keyboard numlock state The defaulte setting is On gt Quiet Boot This item is used to enable or disable the quiet boot Disabled Displays the normal POST messages Enabled Displays OEM customer logo instead of POST messages gt Fast Boot This item is used to enable or disable boot with initialization of a minimal set of devices required to launch active boot option This is no effect for BBS boot options gt Launch CSM This item controls if CSM will be launched gt Launch LAN OpROM policy This item controls the execution of UEFI and Legacy PXE OpROM gt Built in EFI Shell Support This item is used to control whether the Built in EFI Shell appears in the Boot Option You can set the Built in EFI Shell option boot priority in Boot Option Priorities listing when this item is set to Enabled gt Boot Option Priorities These items are used to set the system boot order 14 Security Aptio Setup Utility Copyright C 2012 American Megatrends Inc gt Administrator Password This item is used to install or change administrator password After you input administrator password it then will ask you to confirm the password gt User Password This item is used to install or change user password 15 Save amp Exit Aptio Setup Utility Copyright
Download Pdf Manuals
Related Search