Home

KOMPAS 3D V9

1. cc cecccceccceeccceeeeseeeeseeeeeeeeseeseeeseeeeeeaeeees 23 creating 3 IMOGES eisrean E NNE 29 HOW TOWOIKIMKOMPA S 9D ranea OS 29 creaung Model orenian ea E ete eee Cr 43 EOR SMOG Clic ees eescecen actanceacatecuaagaceceacsaateasa A E 106 Advanced TECNNIGUES iesise a eienemchenenainariceiouminints 127 SENICE TUNCHOMNS a E O iow 129 oreatng graphical COCUMEINS or vendsscecutecanseresuhceametaniedieeidoxydaitdieend E NEEE 134 General iNormalONS serirora e E N 134 NGC e T E E E a eseaeedee sane 138 Managing VIGWS and layar Scares ET 140 How to work with graphical CCItOF ccccccccscecseecceeceeeeceeecaseeceeceeesaeeseueseeeesensensaees 155 Styles of drawing ODJOCHS ccc cece ceccceeecceececeececseeceueeceseeseeessseesueessueeseueesseeeeesaeeseesas 158 Geometric calculator ie desc acurcus tavestewsiowatas Gave naar ineigeeidnedcve eae eo chee N ieee ease ess 159 CHD OO al pats sareiekrston ates a auatiat i ataeactameatiaendeaatane na ictiaaidaaananiaeh asada an tatamanhenacuenemea aan 162 Local coordinate SY SLC INS oe suidiaeenntie in sie a A E 164 IE a of e211 0 9 ia teens are atetece erie rete ene nn ran Pn ston er oa ae A mene eee eee 165 ADU erena R E E Mina Sadana tuacuatebaeianmate deen caceas 167 Compound objects in KOMPAS Graphc ccccccceccceeeeeseeeneeseeeeeseeseeseesaeeseeeeeeeaeees 173 Calculating Mass Inertia properties MP cccccccecccceeceseeeeeeeeseeeeseeeeseeeaeeseesae
2. To switch it On or Off use the Service Library Manager command Connecting Library Before any application library functionality can be used for work you need to connect this library to the system To attach the library to KOMPAS 3D complete the following steps 1 Call the command Service Library Manager 2 The Library Manager window will appear 3 In the list of libraries located in the right part of the first tab select the name of the desired library and call the context menu command Attach To quickly connect the selected library click the mouse in the field next to its name The selected library is connected in its specified working mode menu window dialog or toolbar A red check appears next to the library name meaning that the library is connected The names of all application libraries connected to the system are displayed as the commands in the Library menu Note KOMPAS 3D allows connecting simultaneously no more than 25 libraries Selecting and starting a function from a library The method of selecting and running a library function depends on the mode in which the library is running If the menu mode is used select the command with the library name from the Library menu At the same time the nested menu will open which contains library functions arranged as commands those can be grouped by sections To start function execution select the menu command with the name of this function If t
3. 86 KOMPAS 3D V9 User manual Mirroring bodies When building a model you may need to create copies of bodies symmetrical to the originals about a certain plane KOMPAS 3D provides a special command to make mirrored copies of bodies It allows creating Bodies possessing a symmetry plane Stand alone bodies symmetrical to the existing ones To mirror a body call the command Operations Mirror Body The respective command button is located on the Edit Part toolbar ki Mirror Body Cosmetic Thread To create a cosmetic thread on a cylindrical or conical surface of a part click the Cosmetic thread button on the Symbols toolbar select a reference object a round edge of a cylindrical conical face on which the thread will be created Displayed in the Part window is the ghost of the cosmetic thread The Property Bar will display controls for setting up the draft being created Thread Location External or Internal is determined by the system gl p automatically Information about the thread location is displayed in the same name information field on the Options tab of the Property bar lf necessary you can select the start and or end boundary of the thread a surface face or plane up to which the thread should be constructed To do this activate the appropriate switch Initial Border or Final Border and then select the desired object in the Model window or in the Model Tree The thread ghost
4. Attribute An attribute is an additional nongraphic information related to an object or several objects in a drawing Such information can be represented by a number a string of text or a table with a fixed or variable number of rows In the future attribute values can be used for searching objects or be processed by various applications for example by the BOM design system various analyzer programs etc Attribute types structured descriptors can be stored either directly in the document or in special files attribute type libraries Such files have the lat extension Attribute type An attribute type is in fact a description of what information will be stored in attributes of such type a number a text string a table It is true to say that an attribute type describes the data structure of that attribute Each user created attribute type has its own name If the attribute is a table then the attribute type records the number of table columns and for each column the title and the comment the data type the range of data values if applicable or the list of the allowed values The table of an attribute is organized so that all cells in each its column contained data of the same type and have the same limitations on the value range Therefore an attribute table has a regular structure When an attribute is assigned to a certain drawing object then the type is selected or created first after which the actual attribute valu
5. Cut Revolve Cut by loft Hole Cut Sweep J 3 Trimming by plane Trim by Sketch Sketches of the features that will be cut from an assembly must be created within that assembly Planes or sketches to trim a portion of a model may either be part of the entire assembly or belong to any of its components The result of performing any of those operations in an assembly is stored with the assembly file and is not propagated to the component models whose shape was altered by the assembly operations Boolean operations with parts When editing parts in the assembly context you can subject them to Boolean operations union and subtraction To subtract or unite parts call the command Operations Subtract Components or Operations Join Components respectively fe i The respective command buttons are located on the Edit Part toolbar The components subtraction command allows creating a void in a part that repeats the shape of another part while the union command to glue several parts together After calling the command you shall select parts in the Model window for performing the operation when creating a void you can increase or reduce its size relative to the size of the subtracted parts 94 KOMPAS 3D V9 User manual Creating component patterns When creating an assembly you may need to insert several identical components into it as parts and or subassemblies In this case those must be ordered in
6. 116 KOMPAS 3D V9 User manual For example a sweep cannot be converted to a loft a boss cannot be converted to a cut After calling the command the Property Bar displays the same controls as those used when creating this object v On the Options tab you can specify another section and or guide path for the element as well as change the section sweeping mode v You can also edit the thin wall parameters also enable or disable its creation on the Thin Wall tab v On the Operation Result tab you can modify the operation result and or its applicability range Section path and parameter changes are prompily propagated into the Part window in the way of the ghost feature with updated properties Ger To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command button Loft Feature When editing a sweep whether a part base or a boss cut feature you can change the values of quantitative and qualitative parameters which were defining that element at creation and assign different source elements the section and the path but you cannot change the element type and the type of the Boolean operation applied upon the creation For example a loft cannot be converted to an extrusion feature a boss feature cannot be converted to a cut After calling the command the Property Bar displays the same controls as those used when creating this object v On the Opti
7. Converting a parametric model into ordinary To fully convert a parameter drawing of fragment into an ordinary one do the following actions 207 KOMPAS 3D V9 User manual 1 Select all objects by any convenient means for example by calling the command Edit Select All or by pressing the keys lt Ctrl gt lt A gt E 2 Switch to the Adding Constraints bar and click the Delete All Constraints button 3 After all constraints are lifted off the objects we recommend closing the drawing or fragment with saving all changes done to it and then load it again Editing by dragging points You can edit parametric objects by the mouse by dragging their defining points Such editing is done as follows 1 Click of the left mouse button on the object that you want to edit The object will be highlighted as selected drawn in the specified selection color by default green and its defining points will become accessible 2 Move the desired object point to a new position all objects related to it will also be rebuilt in this case If the constraints applied to an object fully defined its position for example all necessary dimensions are applied that drive the part geometry then the related objects will be simply moved into the new position without tree building the geometry If additionally the object is related to a fixed point then no actions whatsoever will be performed Managing a dimension values An associ
8. Depending on the action performed by the system the cursor shape changes an arrow a cross an interrogation mark with an arrow etc The cursor shape and size can be customized by the user via the commands Service Options System Graphic editor Cursor Selecting hidden overlapping or closely located objects sometimes the object to be selected is located close to other objects or overlaps them or is hidden beneath them At the same time it is difficult or sometimes utterly impossible to select it with the cursor To select any of the nearby located objects including overlapping ones use the object pick over mode Picking over is possible when the system waits for an object to be selected or specified and at the same time several objects being in the cursor s catcher Managing document display in a window The commands to manage display are located in the group of commands View Scale Depending on the type of the active document the set of commands can be different The main ones can be called by the buttons on the View bar E Zoom In ey Zoom Out E Current Zoom You can control the zoom scale factor used in the commands Zoom In and Zoom Out KOMPAS 3D V9 User manual When working with model documents and graphics documents the following commands are also available s Zoom In by Marquee l Zoom to Selection El Zoom In Out Show All When working with text documents and BOMs you can use the fol
9. Parent list displays source objects the Children list resulting ones The names of objects in the relation window are the same as their names in the Model Tree if you entered new names of elements instead of the generated by default these names will be shown in the relation window First level of parent object list contains object directly subordinating current If these elements are in turn dependent on other elements then the next layer of the list contains their source parent elements First level of children object list contains object directly being subordinated by current If these elements are in turn parents to other elements then the next layer of the list contains subordinate dependent elements Therefore the window allows tracking not only direct explicit but also indirect implicit dependency relations Tip Hierarchy of relations is displayed at the bottom part of the Model Tree Realations button serves for this purpose at the control panel of the Model tree Note Hierarchy of relations is not fully displayed This fact indicates that the order of model creation was manually modified Example Any sketch has a single source element a plane or a feature on whose face this sketch is built Other objects can have several parent elements One would commonly need to know an element hierarchy in order to determine what elements changes editing or deleting could directly or indirectly affect the g
10. To perform such tasks you can create patterns of elements KOMPAS 3D provides various methods of creating patterns 2D Linear Pattern Circular Pattern Path Pattern it is also possible to create mirrored copies The respective command buttons are located on the Edit Part toolbar 2 2D Linear Pattern Circular Pattern 85 KOMPAS 3D V9 User manual Cir Path Pattern ga Mirror Pattern After calling the command the Property bar displays the controls to define operation parameters All parameter values once entered or modified immediately reflect on the ghost displayed on the screen After defining all pattern parameters click the Create Object button on the ___ Advanced Control Panel The created pattern will appear in the Part window and the respective icon in the Model Tree You can create patterns of geometry producing boss and cut features ribs chamfers fillets and round holes It is also possible to copy patterns The set of source objects for one pattern may include features that belong to different bodies The pattern creation results in the following Each copy of a geometry producing boss feature or rib is attached to the same body to which the muster element or rib was attached Each copy of a geometry producing cut feature or a round hole is cut from the same body from which the master feature or hole was cut Therefore attaching copies of the same elements to different or multiple bod
11. a parametric or an ordinary one If necessary parametric and nonparametric objects can be combined in one document Additionally you can easily switch from one representation of geometry to another one for example by applying parametric constraints to an earlier created ordinary drawing Introduction to the Parametric Technology of KOMPAS 3D Parametric graphical objects can be created either by programming or by interactively building the model directly as you draw it In a number of CAD systems one can define a creation law while in the process of the drafting which however cannot be modified later in case of an error requiring deletion of the entire draft and starting over or else can be quite hard to modify That is yet another approach when you can apply constraints relations to objects of an already drawn image of a parts or assembly and in an arbitrary order without holding on to any strict sequence In this case any model modification is possible that does not require new construction from scratch This is exactly the convenient and effective parametric technology which can be called variational that soeeds up the design process and oncoming modifications to the documents and it is realized in KOMPAS 3D When working in the parametric mode you can apply various dimensioning linear angular radius and diameter and geometrical parallel perpendicular tangent point on line fixed point etc constraints to model
12. Let us remind that to select a group of objects pick them while holding the lt Ctrl gt or lt Shift gt key pressed Using this method you can insert the same component into an assembly as many times as needed without calling the file selection dialog and searching for the desired document in the list Note If identical assembly components are to be placed in a certain order for example along some path or by a grid with certain parameters prefer using the component pattern creation commands Pattern by Sample command Create a two direction linear pattern of components command Create a circular pattern of components command Create a pattern of components along a path command Moving components After inserting a component into an assembly you can define its approximate position and orientation therein KOMPAS 3D provides several methods of moving components in assembly with respect to its coordinate system You can rotate a component about the center of its outline box about an axis or about a point as well as move translate a component in any direction The assembly component translation and rotation commands are located in the Service group of commands The respective command buttons are located on the Edit Assembly toolbar Move Component a Rotate Component g Rotate Component around Axis g Rotate Component about Point Note 1 If a component is fixed then it cannot be translated or rotated in the assembly coo
13. System settings General system setup When starting and while running the KOMPAS 3D system besides the system files proper other files are used including configuration files library files templates various utility files Default locations of these files and folders for temporary files and documents are stored in the system in the way of KOMPAS 3D environment variables If the variable values are to be other than the default use the Kompas ini configuration file containing the keys with the same names as the variables and with the desired values This file is not included in the installation You would have created it manually and put in the same folder where the Kompas exe file is located When starting KOMPAS 3D system the Kompas ini file is searched for only in J N te folder containing the file Kompas exe Therefore having the Kompas ini file in any other folder is same as not having it at all Configuration Settings Setting up KOMPAS 3D system configuration includes three groups of settings Group Description System Settings Settings made on the System tab of the general Parameters dialog If saving the settings of this group is enabled those are stored in the file cfg Note This file does not store information displayed in the dialog of viewing system files and folders New Document Settings Settings made on the New Documents tab of the general Parameters dialog If saving the settings
14. The image of a fragment cannot be broken down into views since a fragment Is in its nature similar to a view with the scale 1 1 Drawing view just like fragment may contain several layers A layer is one of a drawing s levels on which some objects of a fragment or a drawing view are located Working with layers in KOMPAS 3D is analogous to using overlapping sheets of tracing paper in the conventional paper and ink drafting A fragment may contain up to 2 147 483 647 views A view just like fragment may also contain up to 2 147 483 647 layers Views and layers unlike sheets actually contain the objects therefore deleting a view or layer means deleting all objects contained in it No image can exist outside a view and outside a layer in a drawing and outside a layer in a fragment Therefore when creating a new drawing the system view is automatically produced in it and a system layer within that view When creating a new fragment a system view is automatically created in it If the user did not create any other views and layers then all objects being entered in a drawing will be placed into the system view on the system layer and in a fragment on the system layer Using Views From designer s standpoint the view is an image of turned to an observer visible part of object s surface A view as part of aKOMPAS drawing is a container for objects as well as the objects themselves located in such container The objects
15. If the deleted view views contains objects a message will be displayed in this regard 5 Confirm the deletion 6 Close the Document Manager by clicking the OK button To give up deleting a view click the Undo button on the Standard toolbar Selecting a view KOMPAS 3D provides for a quick selection of one or several views to subject them to oncoming operations editing copying to the Clipboard deleting objects on a layer and so on You can select only the current and active views Around the selected objects a rectangular outline frame is displayed It is a sign that not only separate entities of the current view were selected but the whole view as an object of a drawing The color of the marquee coincides with the color picked for selecting objects Note It the view is empty then upon its selection a colored square with its center in the origin of the view coordinate system will be displayed Three methods of selecting views are provided in the system v Selecting a view by picking an object 1 Call the command Select View By Clicking 2 Select with the cursor any objects located in the desired views v Selecting a View by choosing from the list 1 Call the command Select View By Picking Up 2 The upcoming dialog displays the list of views available for selection Select the desired views in the list and click the OK button v View selection in the Design Tree Select the desired views in the drawing s Des
16. In the drawing there will be a table of the specification flowing style or some tables if objects the specification in the drawing have been divided into pages by means of the switch Place on a new sheet Note The command BOM on sheet Show is accessible if the drawing is not connected to the document specification 2 Call the command the Name From the menu the BOM BOM on sheet or from the shortcut menu of the specification on a leaf 3 In the dialogue which has appeared on the screen enter names for the first and the subsequent pages of the specification If the length of the entered string exceeds width of the table of the specification there is an automatic contraction of characters For word wrap around press a key lt Enter gt If necessary you can change any parametres of text formatting a font height alignment and indents of paragraphs etc 4 Close dialogue by the button OK Over specification tables there will be names To edit available name of the specification fulfil following operations 1 Call the command the Name From the menu the BOM BOM on a sheet or from the shortcut menu of the specification on a leaf It is possible to double click also on the specification name 2 In the dialogue which has appeared on the screen of input of the name of the specification edit the name text or change text formatting parametres or delete the text 3 Close dialogue by the button OK Change will be transferred to
17. It is also possible to mirror a sheet part Keep in mind however that mirrored copies of bends are disregarded when bending and unbending bends or when setting up and mirroring flat patterns Sheet Part Properties A sheet part is characterized by the material thickness S of which it is made The bent portions bends of a part are defined by H Se Inner radius R Bend angle L Width of bend release VW Depth of bend release H XS NSN N Note A bend may not have any releases Besides any bend has a parameter that defines the flat pattern length of that bend Depending on the selected method of defining the flat pattern length this parameter can be the Neutral Layer Factor or the Bend Amount or the Bend Reduction Default parameters for all new sheet fonts are defined in the dialog of sheet body properties 50 KOMPAS 3D V9 User manual Sheet part variables and their management When creating a sheet body in a part variables are introduced in it their values is assigned to the sheet part parameters Sheet body variables and their values are displayed on the Variables bar v SM _Thickness sheet thickness v SM _ Radius inner bend radius v SM Angle bend angle vy SM BA bend amount v SM _BD bend deduction reduction v SM _ K neutral layer location factor v SM_H Depth of bend release v SM _W Width of bend release Variable values are defined as follows when creating a
18. The Sweep command is available if there is one sketch in the model You do not have to select a sketch before calling the command To create a sweep you need to define its section and the section sweeping path The section must be a sketched one Any 3D or planar line curve can serve as a path an edge spiral spline sketched contour or several connected lines curves After calling the command the Property bar displays the controls to define operation parameters v onthe Options tab the section path and the section sweeping method v onthe Thin Wall tab the parameters of a thin wall sweep v onthe Operation Result tab the construction result new body or a boss feature All parameter values once entered or modified immediately reflect on the ghost of the sweep feature displayed on the screen After defining all extrusion parameters click the Create Object button on the ___ Advanced Control Panel to have the feature created The created sweep will appear in the Part window and the respective icon in the Model Tree if Extrusion icon i Sweep boss icon Loft Feature all To create a part base in the way of a loft feature call the command Operations Feature Loft or click the Loft Feature button on the Edit Part toolbar The Loft Feature command is available if the model contains at least two sketches You do not have to select sketches before calling the command When creating a loft operation
19. User manual Editing Boolean operations To edit the shape of elements resulting from subtracting or uniting parts you change the shape and or position of the source parts in the assembly To open an assembly in whose context the element was created use the Edit Owner Assembly command from the context menu of that element After calling the command KOMPAS 3D opens the assembly window in whose context the union or subtraction operation was performed on the components Note 1 To edit the owner assembly you can open its file as usual click the Open button or call the command File Open and select the desired file When using the Edit Owner Assembly command you do not need to search for the desired file through the folders the system finds it automatically Note 2 The Edit Owner Assembly command is available only for the elements obtained by subtracting or uniting parts this command is missing in the context menu of auxiliary axes planes and other elements defined in the assembly context Edit the assembly for example change the relative position of the source parts save and close the model The system will return to part editing You will see that the element resulting from the Boolean operation changes according to how the owner assembly was edited lf you need to change dimensions of a void created by the subtraction operation you do not have to go into the owner assembly editing mode To do this start editing the fea
20. click the Cancel button on the Standard toolbar Using fragments The goal of a professional working with a computer aided design system is developing a new product The main documents released at various stages of a development are the drawings Accordingly a drawing is the main document type in KOMPAS Throughout a professional career each designer accumulates numerous standard 176 KOMPAS 3D V9 User manual solutions that do not get into the form of a finalized and officially approved drawing Those can be various tryouts sketches drafts etc To keep them in KOMPAS there is a special document type a fragment The main difference of a fragment from a drawing is the absence of layout elements title blocks and the unspecified surface finish symbols Besides that you cannot create several different views in a fragment One can say that a fragment is fully similar to the system zero drawing view The purpose of fragments is far wider from just being a storage for isolated images KOMPAS provides the user with a powerful and flexible mechanism of inserting fragments to quickly produce and edit assembly drawings lf an image of an individual part or mechanism is stored in a fragment then you can insert it repeatedly into another drawing or fragment the main document In this case you can choose such a Method of Insertion that the fragment contents is not copied into the main document but instead only a link to this
21. drawings of the product being developed since the documentation is prepared based on the ready images in the drawings a To insert graphics a drawing or a fragment click the Insert Fragment button or call the command Insert Fragment In the displayed standard dialog select the drawing or fragment file and click the Open button The Fragment Insertion Options dialog will appear In it you can specify the insertion method the drawing rotation angle etc An inserted diagram can be copied to the clipboard or pasted from the clipboard also deleted Wrapping text around a picture is not supported Editing an inserted image is possible only if the External Reference insertion method was selected Make the desired changes to the graphical document containing the inserted drawing After saving this document the changes will be propagated to the text document containing the insert 248 KOMPAS 3D V9 User manual Printing documents Obtaining a hardcopy of the created document is one of the major steps when working with automated design systems KOMPAS 3D uses all capabilities of the operating system when working with the output devices printers and plotters Additionally KOMPAS 3D offers to the user a number of utilities that would significantly help making hard copies of drawings and fragments Those include a realistic preview before printing a convenient positioning on the printable area printing only the spe
22. into a graphics document from the Designer s Library the Create BOM object option is enabled in the product parameters selection dialog then a BOM object will be automatically created in the document that belongs to the respective section and has the text portion created by a filling template accounting for the selected product parameters When inserting it will be possible to create a new or specify an existing position number leader for the image of the inserted product material This leader just like the image inserted from a library automatically adds to the geometry of the respective BOM object with all outcoming consequences the capability to calculate zones pass position reference numbers from a BOM to a leader etc If several identical products with same parameters are inserted into a graphics document from the Designer s Library then duplicating each other BOM objects will appear the twin objects To avoid creation of a BOM object when inserting an image from the Designer s Library into a graphics document in the dialog for selecting product parameters disable the option Create BOM object If when editing parameters of an image inserted from a library the Create BOM object option is enabled the respective BOM object will appear in the document Vice versa if when editing a product parameters for which a BOM object was created you disable the option Create BOM object then the respective BOM object will be dele
23. itself may change its position in a BOM as a result of an automatic sorting by values in the fields For example after increasing a value in the Diameter field of a Nut BOM object that object will move down in the list of nuts in the section Standard Items The text portion of a BOM object can always be edited without changing the values in the fields of its template To do this you need to enter and delete data in the mode of editing the text portion without calling the dialog of editing values in the template fields In any case when sorting objects that use a filling template the respect is N gnen to the data in the template fields rather than to the visible text portion in the BOM table BOM placement on a page Sometimes a BOM table needs to be placed on a sheet of an assembly drawing which it relates To do this use the command BOM on Page Show in the BOM menu After calling this command a table appears above the drawing s title block that contains BOM objects All parameters of this table the number and format of columns the title etc except for the number of lines correspond to the parameters of the table that is part of the current BOM style layout as the Table for BOM The number of lines in the table is defined automatically This table is subject to all settings of the current BOM style the number of reserved 239 KOMPAS 3D V9 User manual lines sorting etc Shortly speaking this t
24. of text and copy those to the Clipboard After that the clipboard contents can be inserted into another document or used in another Windows application You can change the results representation by defining different units for the length and mass To do this use the interface items provided on the Property Bar You can specify the results representation accuracy by changing the number of significant digits The results in the dialog will be transformed per the changes made To visualize calculations there is a capability of putting a point at the calculated center of mass To have such a point displayed upon exiting the dialog activate the Center of Gravity switch on the Property Bar That point will be drawn using the current style set by the previously used point creating commands To save calculation results in a file for a future use call the command File Save 185 KOMPAS 3D V9 User manual Saving calculation results to a file To use a body s Mass Inertia property calculations in the ongoing work save them to a file To do this call the command File Save in the results viewing dialog Specify the file name for saving in the appearing standard dialog By default KOMPAS 3D offers to save the calculation results in a file with the extension txt The file is saved in the Windows text format ANSI encoded and can later be loaded for use in any Windows applications Follows below is an example of the results file cont
25. or changes therein are passed to the documents which have a mark in the Send Changes to Document column Data is transferred automatically when saving the BOM Note The document code number and name are transferred neither from a connected document into the BOM nor from the BOM into the connected documents Therefore to establish a reciprocal link between the specification and a connected document you need to click the Fill in Title Block button in the assembly management dialog place the desired document first in the list of the connected and set the mark for it in the Send Changes to Document column Note When there is a reciprocal link a situation could occur in which a product s designation and name in the BOM differs from its designation and name in the connected 241 KOMPAS 3D V9 User manual document The described mismatch happens for example if a document connected to the BOM was either inaccessible or write protected at the time of saving the latter with a modified designation and or name In such a case when opening a BOM mismatching the connected document a warning dialog appears on the screen To proceed you need to specify which designation and or name from the linked pair of the documents is to be replaced by the other one Integration with the Designer s library The Designer s library of the KOMPAS 3D system is fully integrated with the BOM design system If when inserting a standard item or material
26. or hidden in any of them Creating and editing associated views Standard views To create model s standard views in the current drawing call the command E linsert Model View Standard or click the Standard Views button on the Associated Views toolbar After calling the command the standard file open dialog will appear Select the model to create views and open the file The ghost of the image will appear in the drawing window in the form of the view outline boxes The Property Bar will display controls for setting up parameters of the views being created EA To change the set of the selected model s standard views activate the switch View Pattern After selecting the desired standards views and setting up their parameters specify the position of the snap point of the image the main view coordinates origin The selected model views will be inserted in the active document the drawing s title block will receive the following data from the model document v Marking v Name v Mass v Material Note The Material cell is filled only in title blocks of part drawings In the drawing s Design Tree you will see the icons of created views and their names rt View icon in the Design Tree Note The drawing of the model obtained by the Standard Views command needs certain refinement for example adding centerlines center marks etc In addition it does not contain layout objects dimensions specifications etc dime
27. select it and move with the mouse to the desired place Set the cursor inside the outline frame of the view hold left mouse button and drag the mouse The view will move after the cursor When the desired view location is reached release the mouse button To change the rotation angle of a view call from its context menu in the Design Tree the View Settings command The Property Bar will display controls for setting up selected view s parameters Enter the rotation angle value in the Angle field on the Options tab of the Property bar If necessary you can also define the view scale on that tab Note that placement actions can be performed only with the current and active viewes of a drawing Note The system view settings cannot be edited Obtaining images at different scales When creating KOMPAS 3D drawings the user may work under the scale 1 1 that is when creating geometrical objects line segments arcs etc that make up the product s contour natural dimensions are used and views can be used to scale the image For example to arrange a drawing of construction with whole length 1500 mm on a sheet of A1 format it is required to be drawn under the scale 1 2 5 To create such reduced image in traditional way of drawing one would manually divide each geometrical element s parameter by 2 5 and also manually write actual values when dimensioning It s available to create a view under the scale 1 2 5 and draw in it by entering
28. the controls to define operation parameters on the Options tab the section and if necessary and axial line the methods of construction atthe outer sections and path parameters on the Thin Wall tab the parameters of a thin wall loft on the Cutting tab the construction result subtraction or intersection All parameter values once entered or modified immediately reflect on the ghost of the loft feature displayed on the screen After defining all loft parameters click the Create Object button on the Advanced Control Panel to have the feature created The part with a cut loft feature or the part intersection with a loft feature appears in the window while the icon of the cut feature appears in the Model Tree Al Loft cut icon User s library of sketches One of the provisions to automate design is creating user s sketch libraries For example one can compose a library of parametric sketches containing slot profiles and then use them when creating models of bodies of revolution In such a case you would not have to create the same sketches many times you can use a once created image saved in a library possibly a parametric one in any new sketch to develop The user s library of sketches is a common library of KOMPAS fragments a file with the extension lfr Creating a sketch library Connecting Library of Sketches Using Sketch Library Creating a sketch library To create your own libra
29. using the option Unbend v Using control items located on the Release tab you can define angle release parameters Direction fixed side radius and bend angle by line can be set using defining points Release command Serves to create two straight line bends at once in a part with respect to some face of the part The selected line and face will be considered the bend line and the base face of the incision Any straight object can serve as a bend line v Sketched line segment 62 KOMPAS 3D V9 User manual v Polyline segment v Auxiliary axis v Straight edge of a geometry creating feature or surface Bend line requirements v The bend line must lie in the plane of the base face v The bend line must have at least one common point with the base face Note An auxiliary axis appears in the model as a straight line segment Nevertheless the axis Is an infinite line Therefore when selecting an axis as the bend line it doesn t matter whether the axis denoting line segment has common end points with the base face For a bend to be created correctly it is sufficient that the axis projection extension has common points with the base face The result of incision creation depends on the relative position of the base face and the bend line i A general rule is Bending is done on the portion of the part including the base face or fraction thereof that fully or partially contains the bend line Incision Examples If
30. 6 Leave the context editing mode by releasing the Edit in Place button on the Current Status bar 7 Confirm rebuilding the assembly 8 Save and close the assembly file Open or activate the file of the part whose feature was edited You will see it rebuilt according to the introduced changes Error warnings If such model editing was done that invalidated some of its objects considering the hierarchy and or parametric relations then KOMPAS 3D will output the respective diagnostics message It indicates the specific reason for the conflict or loss of the relation between the model components for example The feature lost the base object The base surface is changed Empty Sketch Self Intersection of Contour etc At the same time the model is not rebuilt but stays in the state in which it was before calling the editing command An interrogation mark appears next to the icons of the elements that became invalid after the performed editing If the error occurred after editing a sketch then the exclamation mark appears not only in next to the sketch icon itself but also next to the icon of the element built based on the failing sketch Due to this the presence of an error in the feature is noticeable even if the respective section of the Model Tree is collapsed Similarly an error warning appears next to the model icon a part or assembly if an error is present in at least one of its objects a feature component mate
31. Bar on the Insert toolbar or use the same name menu commands To learn more about the purpose of mentioned elements and commands use the Interactive Help system Inserting and formatting tables E To insert a table in the document click the Enter Table button Upon calling the command a dialog is displayed in which you need to specify parameters of the table being created Define the number of columns and rows in the new table Define the column width and the row height that is the cell dimensions Specify the location of the table header title Upon finishing the setup click the OK button of the dialog A newly created or loaded from file table is immediately available for inputting and editing The most convenient way to navigate through a table cells is by the mouse To switch to the desired cell click it with the left mouse button Additionally you can navigate through cells using the lt Tab gt key or indicated below key combinations lt Ctrl gt lt Left Arrow gt lt Ctrl gt lt Right Arrow gt lt Ctrl gt lt Down Arrow gt lt Ctrl gt lt Up Arrow gt One cell left One cell right One cell down One cell up Text entered in table cells can be subjected to any available formatting operations changing text style indents tabulation parameters types of aligning text in a cell Pa To setup table cell format click the Cell format button In the appeared dialog you can set the cell dimensions and d
32. Border by Arrow button on the Advanced Control Panel and then set the desired contour If the border is still open the system will automatically add a temporary closing segment After selecting each closed boundary a dialog is displayed in which you need to specify the type of the area solid or cut The objects selected as borders are highlighted By default all Mass Inertia property calculations are run in the current coordinate system 4 To assign a special coordinate system to run the calculations activate the option Origin of Local CS on the Property Bar The coordinate system ghost will be displayed on the screen Set the CS origin at the desired point and then rotate the axes at the desired angle You can explicitly enter the origin coordinates and the inclination angle of the CS in the fields on the Property Bar The calculation results are displayed in the appearing dialog You can view the results change the measurement units and accuracy or save results to a file 5 To finish viewing results press the Close button If necessary select different entities and run another calculation sr To finalize calculations click the Interrupt Command button on the Advanced Control _ Panel or the lt Esc gt key 183 KOMPAS 3D V9 User manual MP Calculation of Revolved Solids To calculate mass inertia properties of bodies of revolution complete the following steps 1 Click the MP Calculation of Revolved Solids
33. Editing in a window Is editing an assembly component in a separate window containing only that component without the rest of components To start editing an assembly component in a window select the desired component in the Model three and call the Edit in Window command from the context menu or call the command Edit Component In Window from the Edit menu After calling the command the source file of this component will open Make the desired changes to the model and save it Then close the component window or go into the assembly window When editing a component In Window displayed are all objects that belong to this component and all of them are available for editing you can modify element parameters their reference objects etc However editing certain elements is restricted Those include such component elements that were created in the assembly context using elements from other assembly components that is using elements that do not actually belong to the component being edited for example an auxiliary plane of the component going through edges or vertices of other parts etc In the component file that contains elements defined in the assembly context there are links to the file of the assembly those links are called external since the assembly file is external with respect to the component file When editing such a component in a separate window the only available means is to redefine the external links to make them inter
34. Note that this ghost is displayed when the cursor is passing over the view whose projection plane is perpendicular to the projection plane of the view on which the detail section is based Specify a cutting plane location ey The Detail Section will be created Its icon will appear on a branch of the Design Tree which corresponds to the base view By default all parts crossed by the cutting plane are shown sectioned If necessary you can make some of them inseparable uncut There is a provision to turn off the Detail Section display on its base view To do this in the Design Tree access the context menu of the detail section that needs to be hidden From the menu call the Detail Section command Note When turning off a Detail Section display its boundary line still remains on the screen To reenable the display of a detail section call the command Detail Section again Break View When creating a broken view in a drawing we recommend you to follow the following steps 1 Creating all geometrical objects in a view that make up the model image 2 Creating the required number of breaks in a view by the Broken View command 3 Adding layout objects to a view dimensions designations annotations etc wa To make a portion portions of the view image appear as if deleted and to move ithe remaining pieces closer to which other call the command Insert Auxiliary View Broken View or click the Break View button on the Ass
35. Operations Cut The respective command buttons are located on the Edit Part toolbar 76 KOMPAS 3D V9 User manual o Extruded Feature Revolved Feature Sweep Feature Loft Feature Extruded Feature ey To cut an extruded feature from a part call the command Operations Cut Extrude or click the Cut Extrude button on the Edit Part toolbar The Cut Extrude command is available if the model already has the part base and a single sketch is selected Extruded feature sketch requirements After calling the command the Property bar displays the controls to define operation parameters on the Options tab the extrusion direction extrusion depth and draft angle on the Thin Wall tab the parameters of a thin wall extrusion on the Cutting tab the construction result subtraction or intersection All parameter values once entered or modified immediately reflect on the ghost of the extruded feature displayed on the screen e After defining all extrusion parameters click the Create Object button on the Advanced Control Panel to have the feature created The part with an extruded cut feature or the part intersection with an extrusion feature appears in the window while the icon of the cut feature appears in the Model Tree 0 Extrusion cut icon Revolution Feature To cut a revolved feature from a part call the command Operations Cut Revolve or click the Cut Revolve button on the Edit Par
36. Rotate An often used orientation is when one of the projection planes is parallel to the screen plane in such a case the model appearance corresponds to its image on a standard projection drawing for example on the top or left view It is hard to achieve such orientation by spinning the model with the mouse In such a case you can use a system provas h list of orientation names to change the orientation The Orientation button is located on the View toolbar Clicking lan arrow next to this button brings up a menu listing standard aana mr orientation names Top Bottom Left Right Front Back Isometric mn o few Isometric YZX Isometric ZXY Dimetric each of them Jcorresponds to the respective viewing direction of the model Select a command from this menu that corresponds to the desired os orientation The model will rotate in such a way as to set the Back Idesired view direction Sometimes you may need to orient an Jauxillary plane or a flat face of a part parallel to the screen rather en CaS eng eae than a projection plane To set such an orientation select the tton desired flat object and call the Normal To command from the fly J Jout menu of the Orientation button The model will rotate in such a Iway as to make the view direction perpendicular to the selected pitas object Pee Not only can you use standard orientation names but you can 2 emember the current orientation under some
37. The changes made to the fragment will be immediately reflected on all insertions existing in the main document A situation is possible when an external fragment is being edited while the main document is not open In this case the main document will be updated automatically when opened Therefore an external fragment and the main document can be opened and edited not at the same time however the correspondence between them will be always maintained when opening the main document To convert an insert into a set of individual objects not related between each other and the source fragment call the command Explode from the context menu or from the Edit menu 178 KOMPAS 3D V9 User manual Creating local fragments inside a document lf a standard pattern is to be used only in one document you do not have to create it in an external fragment first and then insert into the document A local fragment can be created and stored directly in the document itself At the same time working with it will be same as with a fragment embedded into the document To create a local fragment inside the document complete the following 1 Call the command Management of Fragments from the Edit menu 2 In the displayed dialog click the Create New button located on the Local tab 3 KOMPAS will open a new window for the local fragment Create the desired image in that window 4 Once a local fragment creation is completed in the menu File pick
38. The face containing the sketch of a dimple or drawn cutout is considered the base face The base face of a dimple or drawn cutout can be only an outer or inner flat face of a sheet body or sheet feature Dimple or drawn cutout sketch requirements Note In fact a dimple creation is not a bending operation rather it is a deforming operation where the sheet material is stretched and its thickness reduced When performing the Dimple command this change in the material thickness is disregarded To call the command click the Dimple button on the Features of Sheet Body toolbar Dor pick it by the name from the menu Operations Features of Sheet Body The Dimple command is available if at least one sketch is selected The sheet feature ghost display is enabled by default and such ghost is displayed in the Model window with current parameters Ay specify the creation direction of a dimple or drawn cutout Select the profile side where the fixed side of the face will be Select the method of defining dimple or drawn cutout height Full Inside or BS side Enter the height in the Height field Note When using the Full method the specified value of the dimple or drawn cutout height must be greater than the thickness of the sheet body Tal PLS J ra Specify the direction of adding side wall material Inward or Outward with lrespect to the surface swept by the profile moved in the creation direction To incline side wal
39. They can be viewed and edited at any time To view and edit BOM objects existing in a drawing or model that is the slave mode of editing BOM objects This mode is available if if there is at least one BOM object in the document To call it use the Edit Objects command In the slave mode you can use all techniques of working with BOM objects The only exception is you cannot call the command of setting position reference numbers The objects created or edited in the slave mode are permanently stored in the graphic document or in the Model document Those can be at any time passed to the BOM connected to the graphics document This is described in the section Transferring objects from a drawing into a BOM Using BOM items objects in a drawing Usually when drafting an assembly drawing the images of parts and mechanisms position reference number leaders and other data appear before creating a separate BOM document In the traditional paper method of creating a BOM the engineer remembers all that information or writes it down in a notebook before starting filling in the BOM When working in KOMPAS 3D the data that will be required when creating a BOM based on the current drawing you can save it directly in that drawing Create BOM objects in a drawing as soon as their images are drafted After connecting the BOM to a drawing those objects will be possible to passed to it at any time In this case objects do not disappear from th
40. When editing a revolved feature whether a boss or a cut you can change the values of quantitative and qualitative parameters which were defining that element at creation but you cannot change the element type and the type of the Boolean operation determined by the choice of the command to create that element For example a revolved feature cannot be converted to a sweep a cut feature cannot be converted to a boss After calling the command the Property Bar displays the same controls as those used when creating this object v On the Options tab you can modify the construction method the direction and angle of rotation v You can also edit the thin wall parameters also enable or disable its creation on the Thin Wall tab v On the Operation Result tab you can modify the operation result and or its applicability range Parameter changes are promptly propagated into the Part window in the way of a ghost feature with updated parameters ato confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command button Swept Feature When editing a sweep whether a part base or a boss cut feature you can change the values of quantitative and qualitative parameters which were defining that element at creation and assign different source elements the section and the path but you cannot change the element type and the type of the Boolean operation applied upon the creation
41. a certain way for example making a rectangular pattern with certain parameters To create groups of several identical components within an assembly you can use commands from the Operations Pattern of components group of operations You can build patterns of the following types By Sample 2D Linear Circular Path Pattern The respective command buttons are located on the Edit Assembly toolbar efsPattern by Sample aag 2D Linear Pattern ae a Circular Pattern Sal Path Pattern After calling the command the Property bar displays the controls to define operation parameters Changes to parameter values once entered or edited are propagated into the display as modifications to the ghost component pattern being created in the assembly w After defining all parameters click the Create Object button to create the pattern The created pattern of components appears in the Assembly window while the icon according to the type of the created pattern in the Model Tree Each instance of a pattern is a group of copies of the source components an To expand the list of instances click the mouse on the plus sign at the left of the pattern icon in the Model Tree An instance ID number is displayed in parentheses at the right of the instance s icon In the case of a 2D linear pattern a pattern instance ID is made of two numbers the first one is the number of instances by the first axis of the pattern the second one the instance
42. a dialog is displayed in which you need to specify the type of the extrusion entity solid or hole and additionally define the entity thickness and material density You can select a value from a reference database by clicking the Density button or enter it manually The objects selected as borders are highlighted 4 By default all Mass Inertia property calculations are run in the current coordinate system To assign a special coordinate system to run the calculations activate the option Origin of Local CS on the Property Bar The coordinate system ghost will be displayed on the screen set the CS origin at the desired point and then rotate the axes at the desired angle You can explicitly enter the origin coordinates and the inclination angle of the CS in the fields on the Property Bar The calculation results are displayed in the appearing dialog You can view the results change the measurement units and accuracy or save results to a file 5 To finish viewing results press the Close button lf necessary select different boundaries and run another calculation Ger To finalize calculations click the Interrupt Command button on the Advanced Control Panel or the lt Esc gt key Viewing results in a dialog window When running a body s Mass lnertia property calculations a dialog appears on the screen displaying the calculation results You can navigate the cursor through the text in the window select the desired blocks
43. a new view Is created which is assigned the first unused ID If it is necessary to copy a view views into the same drawing you can avoid using the clipboard by using the standard copying procedure with the mouse see the topic Copying objects with the mouse Also the system does not try to combine views but creates a new view assigning to it the first unused ID The name of the copy of a view coincides with the name of the original Setting up background and hidden view display During working with the drawing you can make a part of the views background and the others hidden turn Off their display on the screen For the convenience of displaying background and hidden layers on the screen the system provides capabilities to customize their display style The styles of drawing those views are set up in the view displays settings dialog There are two ways to call it Al v Call the command Service States of Views or click the States of Views button on the Current Status bar The Document Manager dialog will be displayed Fab Click the View settings button on the Document Manager toolbar v Call the command Service Options System Graphic Editor Views In the views displaying dialog you can set up the background views display and also the placeholder frames of hidden views In case the placeholder frames of hidden views are not to be displayed turn Off the Show option Choose a line type Solid Dashed or Dotted If
44. always reflects the source You can edit link parameters that is change its source and or the contents choice To modify link parameters call the Edit Link command from its context menu The same dialog will appear on the screen as when creating the link in which you will be able to redefine its parameters Updating a link means regenerating the contents of an existing link Links are refreshed automatically in the following cases v if user performs certain actions that modify the source object what particular modification of the source would cause the link update depends on the selected choice of the link contents v opening and closing a document v Going into the Preview mode Exploding links Exploding a link means voiding relation between a link and its source As a result of exploding the link becomes a normal text that can be edited manually An exploded link cannot be refreshed 166 KOMPAS 3D V9 User manual To delete the relation between a link and its source call the Explode Link command from the link s context menu Breaking and restoring links Exploded link a broken relation between a link and its source A link is broken when the source object of that link is deleted A link can be automatically restored only by undoing the source object deletion using the Edit Undo command If the deletion can no longer be undone then you will have to create the source object anew and then edit the link
45. are assembled in a packaging Other components for example the box flanges and other parts that contain the gears and depend on their size and position are created in place within the assembly according to the position and dimensions of the existing components 42 KOMPAS 3D V9 User manual Creating model Coordinate system projection planes Each model file including a just created new one has a coordinate system defined by its projection planes The name of those objects is displayed in the top part of the Model Tree The model coordinate system symbol is shown in the middle of the window as three orthogonal segments red blue and green A common start point of lines is the model coordinates origin the point with coordinates O O O The planes are conventionally displayed as red blue and green rectangles lying in those respective planes By default the rectangles are located in such a way that their centers coincide with the coordinates origin this display helps the user to view planes location in the space sometimes to better understand the plane location you may want the plane rendering rectangle to be bigger smaller or be located at another part of the plane You can change the size and position of this rectangle by dragging its defining points handles with the mouse those appear when the plane is selected Projection planes and coordinate system cannot be deleted from the model file Those can be ren
46. be rebuilt upon changes in the bend state The resulting shape of the hole depends on its creation type and on what was the bend state at the time of creating the hole Cut in Sheet Body Serves to create holes of an arbitrary shape on outer or inner flat faces belonging to a sheet body or sheet features is To call the command click the Cut in sheet body button on the Features of Sheet Body toolbar or pick it by the name from the menu Operations Features of Sheet Body The Cut command is available if at least one sketch is selected Cut sketch requirements The ghost cut will appear in the Part window together with an arrow indicating the material cutting direction Cannot Change Direction E E geeet the cut creation type by activating one of the switches in the Type group Note You can create a Through cut if the following conditions are satisfied Sketch must be constructed either on the outer or on the inner flat face of the sheet body only The sketch must intersect with the face on which it is created If a cut is created By depth then enter the value in the Depth field on the Options tab of the Property Bar If a cut is created To face then select the object limiting the extrusion in the Model window This object can be represented by a face surface a projection or auxiliary plane On the Cut tab select the result of the operation Substraction or intersection To confirm cut creation click the Create Object
47. button Note The Working window settings option is unavailable if you ve selected a profile created in another version of the system O oO A W N Obtaining licenses for working with the system of three dimensional solid modelling and with BOM design system The KOMPAS 3D three dimensional solid modeling system and the BOM design system are KOMPAS 3D components that are sold at a separate charge To work with models and BOMs you need to have an appropriate license Information about purchased licenses to work with models and BOMS is stored in the memory of a hardware protection key If you re working with a network HASP key lf you are working with a local HASP key If the current workplace does not have a license for working with models BOMs however it ocurred by a user command or as a result of losing a connection with a hardware protection key or because of a lack of a free license on a key etc the system goes into the demo mode of working with models BOMs KOMPAS 3D V9 User manual General working techniques Creating opening and saving KOMPAS 3D documents By using KOMPAS 3D you can work with various document types parts assemblies drawings fragments mixed text and graphics documents Each document is stored in a separate file on the disk and is loaded into the system whenever necessary for editing hard copying using as a prototype etc Working with KOMPAS 3D files is practically none different fro
48. button on the Advanced Control Panel o A cut will be created in the part and its icon in the Model Tree If a cut expands on the bend then the cut will be rebuilt upon changes in the bend state The resulting shape of the cut depends on its creation type and on what was the bend state at the time of creating the cut Note A cut expanding on the bend can be created in such a way that the bend state can no longer be changed 67 KOMPAS 3D V9 User manual Plate command serves to create a plate on a flat face of a sheet body s To call the command click the Plate button on the Features of Sheet Body toolbar or pick it by the name from the menu Operations Features of Sheet Body The Plate command is available if at least one sketch is selected After calling the command the ghost plate being created appears in the Part window The arrow shows the extrusion direction This direction as well as the extrusion depth are determined by the system automatically TO confirm plate creation in the sheet part click the Create Object button on the Advanced Control Panel The created plate will appear in the Model window and the respective icon in the be design Tree Note If the plate fully or partially overlaps a bend then its unbending becomes impossible 68 KOMPAS 3D V9 User manual Dimple command Serves to create a dimple in a sheet part see figure Cutout Base sketch profile face walg
49. button on the Measure toolbar 2 Select closed curves by the cursor one by one circles ellipses splines contours etc serving as the boundaries for the entities subject to the calculation projections of bodies of revolution on the plane Remember that you need to select the boundary of the body of revolution only at one side of the X axis E 3 If an entity is made by a set of line segments arcs and other open elements click the Select Border by Arrow button on the Advanced Control Panel and then set the desired contour If the border is still open the system will automatically add a temporary closing segment After selecting each boundary a dialog is displayed in which you need to specify the type of the entity of revolution solid or hole and additionally define the material density You can select a value from a reference database by clicking the Density button or enter it manually You need to specify the angular arc length for sectors of bodies of revolution The objects selected as borders are highlighted 4 By default all Mass Inertia property calculations are run in the current coordinate system while the X axis of that system is accepted as the axis of revolution To assign a special coordinate system to run the calculations activate the option Origin of Local CS on the Property Bar The coordinate system ghost will be displayed on the screen set the CS origin at the desired point and then rotate
50. captures the image of objects stretched in the instrument s axial direction with distortion in other words in perspective The perspective needs to be accounted for in some cases in order to obtain a realistic image of a three dimensional model KOMPAS 3D supports model display in a perspective projection wi get a model image that accounts for the perspective call the command View Display Perspective or click the Perspective button on the View toolbar Note The perspective convergence point is located in the center of the model window All display types Wireframe Shaded Hidden Lines Removed and Hidden Lines in Gray can be combined with the perspective projection To switch off the perspective projection display of the model release the Perspective button or repeatedly call the command Display Perspective Defining points handles of three dimensional objects When creating and editing three dimensional objects you can define parameters of those objects by dragging their defining points handles with the mouse The defining points handles of a three dimensional object correspond to the numerical fields and switches available on the Property bar at the time of creating or editing that object Note Some objects for example spirals extrusions etc have quite many parameters All defining points of such objects cannot be displayed all at once therefore only those points are displayed on the screen that corresp
51. construction method can be set using the defining points Note If when creating a V shaped beat or U shaped one with bottom and or base edges rounding a too small height is defined compared to the radii then it is impossible to simultaneously meet the values of the angle radius radii and height Since the height and the radius have a higher priority the value entered in the Angle field will be ignored The slope angle of side walls is calculated by the system automatically this is in fact the inclination angle of lines tangent to side walls since their planar portions become degenerate in these cases To save current parameters of a beat for use throughout the session enable the option Default All changes are immediately reflected on the ghost of the beat in the Part Window If a beat sketch expands beyond the limits of the base face then the beat is trimmed by the plane planes of the respective end face see figure end Face To confirm the Beat creation click the Create Object button on the Advanced Control Panel A beat will be created in the part and its icon in the Model Tree Flat pattern mode In this mode the bends selected by the user are shown in the bend state while the rest are shown unbent The bend states set in the part editing mode are ignored when switching to the flat pattern mode Cty To switch to the flat pattern display mode call the command Operations S Features of Sheet Body Fl
52. contained in one KOMPAS 3D view can produce either a single image view cut section or an enlarged detail or multiple ones Theoretically a drawing may consist of a single view which contains all necessary images 134 KOMPAS 3D V9 User manual We do however strongly recommend breaking down all graphical information of a KOMPAS 3D drawing into views and place each image in a separate view This approach provides the following advantages Obtaining image at different scales without without recalculating dimensions manually it is performed automatically Convenience of arrangement of images on the drawing space Each view can be scaled moved and rotated as one object Possibility to make an associative relation between the direction arrow designation symbols cut section lines enlarged details and the designation symbols of the respective images Due to such relation the data like a letter page number etc is automatically transferred across designations Such capabilities noticeably speed up the creation of assembly drawings drawings of large objects and densely populated drawings Additionally you can allow prohibit editing any views at any moment of working with a drawing by making them active or background also enable disable views display by making them shown or hidden You select a desired property for a particular view at the time of setting up a view status You can make one or several breakes i
53. copy the attribute into 7 In the Operations menu select the Attributes command 8 Click the button Take from Clipboard The attributes contained in the buffer will be copied into the selected object 170 KOMPAS 3D V9 User manual If necessary edit the contents of the copied attribute Searching objects using attributes One of the main purposes of using attributes in drawing documents is storing various information related to objects and a fast search relying on it You can quickly select all objects that have the specified attribute type or its value for example you can select all machining station images of the same model on a workshop floor plan To search and select objects by an attribute type or value you need to do the following 1 In the Select menu pick the By Attributes command The dialog for defining search conditions will appear on the screen 2 The dialog displays the list of all attribute types used in the document To use the attribute type when searching select it in the list and click the button with the down arrow The attribute types selected for the search are displayed in a separate list 3 To cancel using a type when searching highlight it in the list of the selected types and click the button with the up arrow 4 lf you want to define a search condition by an attribute contents click the Edit Condition button The dialog to enter search conditions will appear on the screen The com
54. delete 3 The List of Sheets Views and Layers will display all layers of the selected object select the desired layer among them cs If the layer name or number is known then to select the layer you can use the Search Range field located in the lower left corner of the Document Manager 4 K Click the Delete button on the Document Manager toolbar Note You can delete neither the current nor a system layer If the deleted layer contains objects a message will be displayed in this regard 5 Confirm the deletion 6 Close the Document Manager by clicking the OK button g To undo the deletion of a layer click the Undo button on the Standard toolbar element then the rest of the objects of that macro element are also deleted from the When a layer is deleted that contains objects belonging to a multilayer macro document that is the entire multilayer macro element is deleted Selecting a layer KOMPAS 3D provides for a quick selection of all elements on some layer to subject them to oncoming operations editing copying to the Clipboard deleting objects on a layer and so on You can select only the current and active layers Two methods for selecting a whole layer are available v Selecting layer by clicking one of its elements 1 Call the command Select Layer By Clicking 2 Select with the cursor any one of the objects belonging to the desired layer All objects in the layer will be highlighted v Selecting la
55. dialog select a sheet in the List of Sheets Views and Layers and click the Delete button Managing views and layers Views and layers of aKOMPAS system graphic document are characterized by a set of properties v Status v Number v Name v Activity v Visibility v Color The values of the activity and visibility properties together determine the status of a view or layer The property values can be changed for every view or layer separately Also it is possible to simultaneously alter the values of the properties of several layers at once For a group change of layer states the static sets of objects can be used Groups of layers and Groups of layer properties or dynamic sets Filters All operations with views and layers are done in the Document Manager dialog The order of the execution of these operations on the layers depends on the method of layer grouping which is selected for the graphical document when setting up 140 KOMPAS 3D V9 User manual View and Layer Statuses The state of a view layer is defined by the values of the following parameters v Activity v Visibility The Activity property manages the availability of view layer objects for editing and can have two states active or background Objects of the active view layer are accessible to the editing and deletion operations All contents of an active view layer is displayed with the same color set for the current view layer in the Do
56. display a model with hidden lines removed call the command View Display Hidden Lines Removed or click the Hidden Lines Removed button on the View toolbar Display Model with Hidden Line Removal Hidden Lines in Gray The hidden lines hidden edges and portions thereof can be displayed in a color that is different from visible lines in a lighter color Ei To display a model with hidden lines in another color call the command View Display Hidden Lines in Gray or click the Hidden Lines in Gray button on the View toolbar Displaying Model with Hidden Lines in Gray 35 KOMPAS 3D V9 User manual Display Shaded The Display Shaded option allows viewing the model surface in order to get an idea about its shape Gi achieve shaded model display call the command View Display Shaded or click the Shaded button on the View toolbar When displaying a shaded model the optical properties of its surface will be accounted for color shininess diffuse etc Dimmed Wireframe The Dimmed Wireframe display adds the Hidden Lines Removed style wireframe over the shaded image Ci uy display a model as dimmed wireframe call the command View Display Dimmed Wireframe or click the Dimmed Wireframe button on the View toolbar Note A dimmed wireframe display can be achieved if the shaded model display is enabled Perspective Any optical instrument for example a human eye or a photo camera
57. displayed in the Model window Ea er To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command button Editing grid parameters When editing pattern parameters you can change the values of quantitative and qualitative parameters which were defining this pattern at creation but you cannot change the pattern type For example a Circular Pattern cannot be converted to a 2D Linear Pattern To edit pattern parameters select the desired pattern in the Model Tree and call the context menu command Edit Feature When working with a pattern of part elements you can also select a face edge of a pattern element and call the context menu command Edit Original Feature After calling the pattern editing command the Property Bar displays the same controls as those used at the time of its creation If some elements were deleted the Deleted tab will appear Enter the new pattern parameters for example step activate the desired switches All changes to pattern parameters are reflected on the pattern ghost in the Model window For a circular pattern you can select another axis for this pattern by clicking the mouse on an axis or edge entity in the Part window or on an axis icon in the Model Tree When editing a path pattern you can select another curve by clicking the mouse on the respective entity in the Model window 113 KOMPAS 3D V9 User manual a T0
58. do this unfix the t field and select the desired point in the Part window The selected point coordinates will be determined automatically gl f Select the hole creation type by activating one of the switches in the Type group Note You can create a Through hole if the following conditions are satisfied Use an outer or an inner flat face of the sheet body for construction The hole parameters position and diameter must be such as to make the hole intersect with the select face If a hole is created By depth then enter the value in the Depth field on the Options tab of the Property Bar If a hole is created To face then select the object limiting the extrusion in the Model window This object can be represented by a face surface a projection or auxiliary plane Enter the hole diameter value in the Diameter field The diameter value and the hole center popsition can be set using defining points 66 KOMPAS 3D V9 User manual All changes are immediately reflected on the ghost of the hole in the Part Window aa To confirm hole creation click the Create Object button on the Advanced Control Panel e A round hole will be created in the part and its icon in the Model Tree When creating a hole in the part a sketch is created automatically It is located on the face selected to construct a hole and contains a construction point located on the hole axis If a hole expands on the bend then the hole will
59. fragment is stored In the future any modification of a fragment inserted by an external link will cause an automatic adjustment of all instances of insertions of this fragment into the main document Besides inserting contents from an external fragment KOMPAS allows creating a local fragment inside a document and then use it many times Additionally it is possible to keep fragments in libraries Various methods of inserting fragments KOMPAS provides three methods of inserting a fragment into the main document The first method is Inserting an exploded fragment In this case the object of the fragment being inserted are physically copied into the document and any relations between these new objects in the source fragment are lost The second method allows to embed the fragment being inserted into a document In this case the fragment s contents is physically copied into the document and is stored there as an integral object a special type of object is created which is an internal standard fragment In this case the relation with the source fragment is not preserved except for the information about its name and the full path to the file Such insertion method is suitable in the cases when changes in that portion of the part image that is contained in the fragment must appear only in one document but in several occurrences When a fragment is inserted in the main document as an external link then only a link to the source file is cr
60. in the cases when a complex copying is required for example by a linear or a circular pattern use the special editing commands Clipboard Cutting items to Clipboard The object is put to the clipboard by copying At the same time it is deleted from the document To cut objects to the clipboard do the following 1 Select all objects in the document that you want to cut move to the clipboard 2 In the Edit menu pick the Cut command it is available only if there are selected objects in the active document or press the keys lt Shift gt lt Delete gt or lt Ctrl gt lt X gt Remember that the pre existing clipboard contents will be deleted 3 The cursor will change its appearance to a small coordinate system The system waits for you to select a point that will serve as the base for the selected set of objects You can enter the desired coordinate values in the fields of the Property Bar If objects belonging to different drawing views are selected or if entire views are selected then the anchor point will be automatically set at the origin of the coordinate system of the zero view the lower left corner of the drawing page After typing the reference point coordinates or selecting its position the highlighted objects will be copied to the clipboard and deleted from the document Copying objects to the Clipboard The object is put to the clipboard by copying At the same time it remains in the document To copy objects
61. into the assembly drawing or the assembly model the changes made in the BOM connected to it For example as a result of sorting objects in a BOM those objects received new position reference numbers To have the respective numbers appear on the shelves of leaders in a drawing objects with those numbers should exist in a drawing To transfer objects from a BOM into a drawing use the command Synchronize Data Synchronization is also run automatically without the user calling the respective command when saving or closing the BOM After calling the command the changes to BOM objects are transferred from the BOM into the drawings and models connected to it When synchronizing instead of having overall copying of all objects from one document into another only the differing data is transferred If a text portion or advanced parameters of an object differ between the drawing and the BOM then the text portion or advanced parameters are copied from the BOM object from within the BOM into the respective object in the drawing If some object existing in a BOM is missing in a drawing then after the synchronization this object will be passed to the drawing provided that that objects includes inside itself geometry from a drawing Objects without geometry and those existing in a BOM only are never passed to the drawings If an object without geometry came into a BOM from a drawing it will be passed into the same drawing The document to
62. is a design method in which a part s body is formed by subtracting some bodies from others In this case you need to create two intersecting bodies first of which will define the part shape and the second the shape of the void After that you will need to perform the Boolean subtraction operation with the bodies subtracting the second body from the first one This design method is recommended for creating parts with complicated pockets of other cuts passing through complicated surfaces with fillets Note If such pockets or cuts are symmetrical than before applying boolean operation it is necessary to create copy of the second body with the Mirror Body command and then perform Boolean operation twice The applicability range of material adding and removing operations Operation applicability range or application area is the set of bodies that are affected by the result of the operation When material is added to the part that is when attaching geometry producing boss features and creating a sheet body the applicability range defines the bodies with which the feature being created edited will be merged when removing material that is cutting out geometry producing features creating round holes trimming by a plane or by a sketch the bodies whose material will be removed as a result of the operation For example there are three bodies An extrusion operations sketch is created on the top faces of the body 1 Fig 1 The method
63. is as follows Call the View Settings command from the context menu of the projection view in the Design Tree The Property Bar will display controls for setting up view parameters Activate the Projection Correlation switch After that you can enter the view anchor point coordinates in the fields on the Property Bar To enable a project of relation from the context menu of that view in the Design Tree call the Projection Correlation command A check will appear next to the command name A project of relation will be enabled Breaking associative relations Associative views permanently maintain a relation with the models that they depict Due to this any changes to the model propagate on its view views For the same reason manual geometry editing in associative views is impossible An associative relation between a view and the model can be destroyed To do this use the command Explode View from the view context menu in the drawing s Design Tree you can also call the command Edit Explode After exploding an associative view turns into a set of entities line segments arcs etc and becomes an ordinary user view on a KOMPAS 3D drawing The image of an exploded view can be edited by any means available in the system scaling deformation editing by hot points etc When exploding a view which is the base for creating projection views those views turn into arbitrary ones In other words the relation of projective views with t
64. linked Windows module DLL By default library files use the extensions DLL or RTW The application libraries provide a programmatic access to all KOMPAS 3D capabilities available in the interactive mode creating and editing objects working with a model document opening and saving drawings and fragments etc Note that library using capabilities are not at all limited to a mere insertion of standard parametric elements into a drawing A library can be a complex subsystem of computer aided design tuned for a specific task which outputs complete designer s documents or their blocks as a result of running design algorithms It is true to say that entire CAD systems oriented at objects of a certain class can be developed in the way of application libraries KOMPAS 3D does not impose any limitations on the size and complexity of library functions the speed of executing library functions being mostly dependent on the computer characteristics size of RAM hard disk data exchange speed etc KOMPAS 3D supports working simultaneously with several connected libraries The modes for working with a library can be different window dialog menu or panel After connecting a library to the system the user selects the desired function from its catalog and runs it Working with libraries KOMPAS 3D provides a special system for working with libraries the Library Manager Designation of Library Manager 256 KOMPAS 3D V9 User manual
65. lt Shift gt lt Down arrow gt the model rotates in the vertical plane perpendicular to the screen When using key combinations lt Ctrl gt lt Shift gt lt Right arrow gt and lt Ctrl gt lt Shift gt lt Left arrow gt the model rotates in the horizontal plane If you need to spin the model in the screen plane use the key combinations lt Alt gt lt Right arrow gt and lt Alt gt lt Left arrow gt The angle of the model rotation upon a single stroke on the key combination is called the Angular Step of Model Rotation To set it up call the command Service Options System Model Editor View Control Options Enter the desired step value in the Angular Step of Model Rotation field or select one from the list Exit the dialog by clicking the OK button After that model spinning by keyboard combinations will be done with the step you specified Sometimes you may need to rotate the model by exactly 90 degrees To do such rotation in the vertical plane perpendicular to the screen use the key combinations lt Space gt lt Up arrow gt and lt Space gt lt Down arrow gt in the horizontal plane the keys lt Space gt lt Right arrow gt and lt Space gt lt Left arrow gt and in the screen plane the keys lt Alt gt lt Up arrow gt and lt Alt gt lt Down arrow gt 32 KOMPAS 3D V9 User manual Model Orientation To change model orientation KOMPAS 3D provides the command Service
66. menu or from the Service menu Deleting a macro element Deleting a macro element means deleting both the element itself and its member objects Note The base planes and the coordinates origin cannot be deleted from the model Therefore if those were grouped into macro element then they will stay in place after it is deleted 105 KOMPAS 3D V9 User manual To delete a macro element macro elements select it and call the Delete command from the context menu or from the Edit menu After that the object deletion dialog will be displayed It lists all member objects of the macro element being deleted You can confirm the deletion or reject it Editing model The presence of parametric relations and constraints in a model naturally affects its editing techniques When editing a part any of its element parameters may change at any time parameters of a sketch operation construction axis workplane After defining new parameter values the part is rebuilt according to them At the same time all its existing relations are preserved For example the user changes an extrusion depth and edits its sketch as a result another sketch built on the side face of the body created by this feature will still stay on this side face rather than hanging in the air in its original position When editing an assembly any of its components can be changed editing parameters of part elements modifying subassembly contents moving component
67. name and then K to it at any moment by selecting this name from the list For this click the Orientation button itself a The dialog with the list of orientation names existing in the model will appear on the screen In it click the Add button and enter the name of the new orientation It will appear in the dialog n 2 K no non aa Te Be MT Dimetric ee ee Hi enere 20 mY Ca rau Mouser within the list of the orientation names Click the Exit button in the on Spee eee eee eee ee eee dialog The new name will appear in the fly out menu of the Orientation button on the View toolbar Later when the model orientation changes you can select the orientation you created from the menu of the Orientation button and the model will rotate to assume the orientation according to the specified name Upon clicking the Orientation button the orientation selection dialog appears where you can create a new orientation or select an existing one or else delete a user defined orientation name from the list To select an existing orientation focus on its name in the list and click the button Set in the dialog The model will rotate in such a way as to set the desired view direction To delete an orientation name from the list focus on it and click the Delete button in the dialog The selected name will disappear from the list the respective orientation will no longer be available for selection You cannot d
68. new style can also be created directly in a container Using style libraries provides increased flexibility when working with documents Remember however that if you are using line or hatch styles from external libraries in a drawing then to correctly displayed at drawing on another computer you would have the carry those libraries over as well Assigning the style when inputting an object After calling a command of creating a drafted object for example the command for drafting a line segment an interface item with the Style drop down list appears on the Property bar By default the new object is assigned the current style that was set when performing previous commands This style appearance is shown in the respective field If you need to change the style of the object being created open up the Style list and 158 KOMPAS 3D V9 User manual select the desired choice If you choose Another style then a dialog will appear on the screen where you can select additional styles from the list of system ones or from an external library or else from the user composed container While creating an object you can change its style several times using the style control item Changing the style of an individual object If you need to change the style of an individual object for example the width and color of a line segment double click the mouse on that object to edit it To change the style complete the same steps as when a
69. next to the cursor click the left mouse button The constructed point will be aligned with the reference one The point coordinates will be defined automatically and fixed in the X Y Z fields of the Property bar The Associate option will be automatically enabled This means a link is created between the constructed point and its reference point Due to this link the newly created point will follow its reference point when the position of the latter is changed You can define the point name and color on the Properties tab of the Property bar After completing the creation of the first point the system waits for setting up the position of a subsequent point gio finish points creation click the Interrupt Command button on the Advanced Control Panel or the lt Esc gt key Surfaces Surfaces can be created in a file of a KOMPAS 3D model in two ways 1 By importing from an external file in the SAT or IGES format 2 By a direct construction Surfaces of four types can be constructed Extruded Revolved Loft Swept A surface of any of those types is a trace of sweeping a sketch in a specified direction a Examples of surfaces a extruded b revolved c loft d sweep When creating associative model views in drawings which contain surfaces the user can control their display on the views To perform the operations of importing or creating surfaces you can call the appropriate commands from the group Operations S
70. not directly connected to a BOM but allows creating BOM objects Usually a graphics document or model document contains one BOM description that allows creating objects in it to pass to the single BOM However it is possible to create multiple BOM descriptions in one graphics document or model document This is described in detail in the section Objects from different BOMs in a drawing model Transferring objects from a drawing into a BOM Created in a drawing or in a model BOM objects are not feasible in the document except for the cases of placing a BOM on a drawing sheet Those can only be seen in the slave mode window and cannot be printed To make BOM objects appear in a separate BOM document which can be printed you need to transfer them from a drawing model into a BOM connected to it To transfer BOM objects from a drawing model into a connected BOM use the command Synchronize Data Synchronization is also run automatically without the user calling the respective command when saving or closing the document connected to the BOM After calling the command the changes to BOM objects are transferred from the drawing model into the BOM connected to it When synchronizing instead of having overall copying of all objects from one document into another only the differing data is transferred If some object is missing in a BOM that object will be copied into it If a text portion or advanced parameters of an obje
71. object its own attribute instances are created meaning that those are duplicated 168 KOMPAS 3D V9 User manual Creating new attribute types To assign an attribute value to a drawing object or a group of objects first you need to describe this attribute type To do this complete the following 1 Call the command Service Style Libraries Attribute Types The dialog for working with attribute types will appear on the screen 2 Attribute types can be stored either directly in the document local types or in special files attribute libraries Now let s review creating a new type in a document To start creating a new type click the New button 3 In the following dialog define the attribute type parameters The required input is the name 4 Set the desired attribute type using the switches The following types are supported v Text Line v Number v Table of Fixed Size v Table of Variable Size If the Variable Size table option was selected then the Assigned Prototype button appears while in the case of a Fixed Size table there will be an additional Number of Table Rows input field 5 The name of the newly created attribute type is now displayed in the list of the main dialog Click the Exit button to finish the dialog A new numerical or table attribute type is created similarly In the case of the table the data description is performed for the data that will be stored in the table columns Assig
72. objects as well as introduce equations and inequalities defining dependencies between model parameters A number of constraints can be defined without explicitly entering the values for example a tangency condition between two lines or the equal radii condition On the contrary such constraints as a fixed radius of a circle or a dimension value are expressed precisely by numerical values The difference between a parametric image and an ordinary one is that the former supports relations between objects Some of relations are introduced automatically at creation coincident points a point being positioned on a geometrical line parallel perpendicular symmetry tangency if of course the user did not disable this capability Coincident points and a point on line are constrained by a snap that activates upon selecting this point a global or a local one while the parallel perpendicular and tangent conditions in the respective object creation procedures Additional mutual relations and constraints can be assigned to drawing object at any time while working with the document The commands to assign such relations and constraints are located on a separate toolbar Accordingly constraints on one or several 203 KOMPAS 3D V9 User manual selected objects can be disabled at any time as well Tips on using parametric capabilities When working with drafted documentation use parametric capabilities discreetly evaluating real benef
73. obviously the contents of these columns depends solely on the properties of the three dimensional model itself its extents purpose material etc When creating and editing BOM objects in graphics documents there are no restrictions on filling the columns Therefore any data can be input in the columns of the graphics document that were left blank when building a BOM object in the model These data may vary across different graphic documents But since only the columns having the property of being used in the model will be used for synchronizing with the model no conflict will occur Sections of BOM In any BOM objects are positioned in the order prescribed by a standard Standards usually admit the presence of certain sections in a BOM Sections are one part to a KOMPAS 3D BOM style Their quantity names and order are defined when setting up the style By selecting the current BOM style you actually select the list of allowed BOM sections besides other settings and parameters By adding a new object to a BOM you specify in what section it should be placed after which the title of the selected section appears in the BOM form The title is already underlined and is surrounded by empty all lines above and below according to the standard You just need to enter the text portion and additional parameters of the BOM object that appeared in the new section 233 KOMPAS 3D V9 User manual To place any object in an already ex
74. of defining the extrusion depth is Through All Fig 2 Any of those bodies and in any combination can be included in the operation s application range Suppose the applicability range Fig 2 1 Fig 2 2 consists of the bodies 1 and 3 82 KOMPAS 3D V9 User manual Asa result of cut extrude the hole will be created only in bodies 1 and 3 Inspite of the fact that extrude passes through body 2 it will not be cutted because it is beyond the operation area If the extrusion feature will be a boss then a new body will result consisting of the bodies 1 and 3 and the extrusion feature Despite the extrusion element goes through the body 2 it will stay alone since it is not included in the extrusion operation applicability range By default the applicability range of an operation is determined automatically it includes all bodies except for the hidden ones with which the operation produced feature intersects it is shown as a ghost before completing the operation Tip Thus if you are working with intersecting bodies then we recommend hiding those of them that should not be included in the applicability of range of the performed operations If necessary the applicability of range of any operation can be set up manually In the above examples the result of cutting with automatic applicability range determination would be the holes in all three bodies while the result of making bosses a single body combined of the bodie
75. of sketched objects you need to confirm the move To confirm the sketch coordinate system relocation click the Create Object button on the Advanced Control Panel Gror To cancel moving the coordinate system and exit the command click the Interrupt Command button on the Advanced Control Panel Thus when using the command Locate Sketch you can change the sketch position on the plane without starting the sketching mode 107 KOMPAS 3D V9 User manual A geometry producing feature and based on it elements will rebuild according to the new sketch position The Locate Sketch command is not available if graphical objects in the selected sketch have a parametric relation with a helper ghost or projections of existing vertices and or edges Changing Sketch Plane Sometimes you may need to change the spatial position of the sketch carry the sketch over to another plane To place a sketch on another plane select the sketch in the Model Tree and call the context menu command Change Plane This command allows carrying a sketch over to another plane or to another flat face After calling the command a plane or a flat face on which the selected sketch was created is highlighted The system waits for another plane or flat face selection Once a plane or flat face is specified the sketch is moved onto it In this way the sketch default coordinate system position is calculated anew Note The sketch coordinate syste
76. or upon setting the cursor in it call the command Insert Text Template The Text Templates Librarian window will appear on the screen Select the desired template in it To insert a template into a text double click the mouse on it If when setting up the system the option Save Entered Text to File is enabled in the section Text Editor Text Templates then the text that was manually entered in the object columns will be automatically saved in the file of text templates A structure is built in this file that accounts for sections and columns of a BOM Semiautomatic data input into the BOM entries If a drawing or aKOMPAS 3D text document is connected to a BOM object then the data from the title block of that document will be passed to the text part of the BOM object provided that such transfer of data was enabled when setting up the BOM style In this case there is no need in the manual data input into some of the object columns which helps avoid typos For example the data from a drawing s title block can be automatically passed to the BOM columns Format Designation and Name After editing and saving this data in the connected document those will be transferred again to the BOM object Therefore due to a relation between a BOM object and the document the text portion of the object is filled in and a concordance is maintained between the information in the title block of the connected document for example a part drawi
77. or in the model window Call the context menu command Edit Feature If you need to edit a feature you can select any its face edge or vertex in the model window and call the context menu command Edit Original Feature 108 KOMPAS 3D V9 User manual The system will switch to the command that was used for building the selected element At the same time only those elements will be left in the model window that are located before the edited element in the Design Tree In other words the model will temporarily return to the state in which it was at the time of the edited element creation The Property Bar will display the same controls as when creating an operation Edit the required operation parameters and click the Create Object button on the Advanced Control Panel After that the model will be rebuilt according to new parameters of the edited feature You can edit some parameters of the element without going into the mode of that element s creation command To do this use the model variable management window To call this window use the command View Toolbars Variables To modify the value of a variable or parameter select the respective field by a mouse click make another click to make this field editable Enter the new value of the variable or parameter or the expression to calculate it Upon entering new variable values the element icon in the Model Tree is marked with a red check This means the element para
78. own file After editing a part used as a base template by other parts all changes propagate to the files containing the link to the base template 48 KOMPAS 3D V9 User manual A base part without history which does not maintain a link to its source file is copied into the model and loses information about the name and location of the source Editing the source file will not affect such template base feature Whatever was the method of inserting a template base part into the model you cannot edit elements of the template part within the model Any template base part elements can be modified only if that was inserted as an external reference and only in its source file 49 KOMPAS 3D V9 User manual Sheet part General information KOMPAS 3D supports modeling parts created from a sheet material by bending Commands for working with sheet parts are located in the Operations menu and the buttons to call them are on the Features of Sheet Body bar A sheet part creation starts with creating a sheet body Other sheet features can be added on to it v Bends v Plates v Holes v Cuts v stamped features Geometry producing features of other types extrusion revolved sweep loft can also be added to a sheet model or cut from such a model Additionally you can add design elements to a sheet part fillets chamfers ribs holes etc Copy operations are available for sheet bodies plates holes and cuts Note
79. reference number displaying is enabled or not if the numbering is disabled in previous section Position reference numbers are automatically assigned only to main BOM objects Passing the position reference numbers from a BOM to the shelves of the position liters in a drawing is possible only for those BOM objects whose geometry includes a position leader This update occurs when synchronizing the data passing objects from a BOM into a drawing Note Reference leader included in macro element cannot obtain reference number from BOM Twin Objects Twin Objects are the objects in one section that have the same data in the column by which the sorting is done Those may appear as result of copying objects inserting identical items into a drawing from the Designer s Library entering the same text portion of objects etc When using the automatic sorting those objects are assigned the same position reference numbers and all of them except on the first created are hidden from the display of objects in the table Therefore in the usual modes such objects appear as one BOM object You can at any time toggle on or off the mode of showing all BOM objects In this mode all objects are shown in the BOM table including those whose display was turned off by any of the means automatically or manually If printing the BOM is initiated from that mode then all objects will be printed Objects of different BOMs in a drawing or model W
80. screen resolution this data is necessary for positioning the main system window 14 KOMPAS 3D V9 User manual User s Profiles A profile is a set of data about system settings working window settings and some of the new document settings Using profiles you can quickly re tune the system For example you can create a profile for three dimensional modeling that is a profile containing settings which give you most convenience working with three dimensional models profile for developing design documentation etc Then to set up the system for performing a particular task you will just need to apply the appropriate profile To save current settings in a profile file complete the following steps 1 Call the command Service Profiles 2 In the appearing dialog set the options corresponding to the groups of settings to be saved in the profile 3 Click the Save As button 4 Inthe appearing dialog specify the name and define location of the profile file Note The profile file does not record the names of the last opened documents neither it does the configuration of the open document Windows To remove an existing profile file complete the following steps 1 Call the command Service Profiles In the appearing dialog select a profile from the Profiles list Set the options for the groups of settings you need to use Click the button Apply The specified settings will be applied Click the Exit
81. segments and in the Model Tree as a special icon s Auxiliary axis icon in the Model Tree An axis depicting line segment slightly protrudes beyond the extents of the objects which were used as the reference for constructing that axis Sometimes to better understand an axis location you may want its rendering line segment to be longer shorter or be located at another part of the axis straight line You can change the size and position of this line segment by dragging its defining points handles with the mouse those appear when the axis is selected Construction planes To perform the operations for creating auxiliary construction planes you can use commands from the group Operations Plane The buttons for calling those commands are located on the Construction Geometry toolbar offset Plane plane through Three Vertices E Plane at Angle to Another Plane Plane through Edge and Vertex Elane through Vertex and parallel to Another Plane Plane through Vertex and Perpendicular to Edge Norma Plane F Tangent Plane Plane through Edge Parallel Perpendicular to Another Edge g Plane through Edge Parallel Perpendicular to Face 96 KOMPAS 3D V9 User manual Z Median Plane The planes created by these commands are displayed in the Part window as rectangles and in the Model Tree as a special icon fig Auxiliary plane icon in the Model Tree A plane depicting rectangle slightly protrudes beyond the exte
82. several documents at once The Preview mode has its own Main menu Control bar and Property Bar In the preview mode the printable area is schematically shown on the screen one or several sheets of paper It realistically shows the selected document or several selected documents lf the paper size defined in the settings of the current printer is less then the document or documents image the system automatically calculates the number of pages required for the printout In this case the preview output area is divided by dotted lines into portions corresponding to the current paper size and orientation The size of paper sheets including dead zones the areas along the sheet margin on which the printer cannot print because of its design and the required number of pages are displayed at the bottom part of the screen in the Message line There are the following provisions to position a document in the output area 249 KOMPAS 3D V9 User manual Moving the document Rotating the document Scaling a document The document documents that is displayed in the output pane at the moment is considered current It is displayed surrounded by a green outline frame To make a document current click the mouse on its image or select its name in the Document list on the Property Bar To make multiple documents current simultaneously select them holding down the lt Ctrl gt key Once the document is positioned in the desired way ca
83. specifications etc A text document file has the kdw extension KOMPAS 3D V9 User manual File Types KOMPAS 3D uses by default the following file extensions Document Files a3d Assembly files m3d Part files cdw Drawing files frw Fragment files kdw Text Document files Spw Parts List files tbl Table files Document Template files a3t Assembly Template files m3t Part Template files cdt Drawing Template files frt Fragment Template files kdt Text Document Template Files spt Parts List Template files System and auxiliary files tdp Text Template files tol Tolerances files lat Attribute Types Library Files Ics Line Style Library files Ihs Hatch Style Library Files Its Text Style Library Files lyt Document Layout Library files ifr Fragment Library files 13d Model Library files bss Special Characters Library files SSS Special Characters Descriptors Library files tbl Table files pmn User Menu files prj Project files containing information about new document settings New document settings dns Material Density files rps KOMPAS RPS Client Exchange files Ims Library Manager window Structure file pfl profile file kds File of Codes and Part 11 KOMPAS 3D V9 User manual Units KOMPAS 3D uses the Metrical Measurement System Distance
84. specify whether the incision should be created with adding material or without adding v Select the desired bend state using the option Unbend 63 KOMPAS 3D V9 User manual v Using control items located on the Release tab you can define angle release parameters Whether or not there is a flat portion in the incision depends on the combination of the bend angle the bend radius and the distance Details The direction size radius and other incision parameters can be set by defining points When done with settings click the Create Object button on the Advanced Control Panel An incision will be created in the sheet part and the respective icon in the Model Tree la Incision icon Note that bends produced as a result of the incision are displayed in the Model Tree as standalone objects Editing bends Editing a bend means changing parameters of an individual bend belonging to a sheet feature This sheet feature is the source parent object of the bend being edited The source object parameters do not change as a result of editing a bend When editing a bend you can change its following parameters v Radius type and value v Bend Flat Pattern Parameter To edit a bend select it in the Model Tree and call the command Edit Feature from the context menu or from the Editor menu The Property Bar will display controls for setting up bend parameters By turning On the By source item option you require th
85. taken However if sensitive changes are done to the data structure description moving deleting or adding columns in a table changing the data type in a column changing the range of values in a columns switching from a table with a fixed number of rows per the table to a one with a variable number of rows etc then the system will automatically mark the old type as deleted In this case the edited type will be added to the document or library where the former type was stored If you are certain that the attributes of the old type are not used in the documents and that type will no longer be needed then you can go into the dialog of managing deleted types by clicking the Deleted Types button and destroy them If on the contrary you need a previously deleted type for your work this dialog will let you restore it If you attempt to work with an attribute whose type is marked as deleted then KOMPAS 3D will offer you to either restore the deleted type or stop working with this attribute If an attribute type was permanently deleted then the system will be able to show the contents of this type attributes but will not let you work with them edit data run a search etc Assigning an attribute to multiple objects An attribute can be assigned not only to an individual object but also to multiple objects simultaneously For example you can assign a common attribute with the Machining station model type to multiple images of the sa
86. the sorting type alphabetical by a sending numerical values or combined and by what column the sorting will be done BOM objects in KOMPAS 3D are sorted by one column in a section in different sections the columns to sort by can be different If the data are entered into the column that will be used for sorting by a filling template text portion then the combined sorting type should be enabled in the section In this case the sorting will be done by the template fields in the order built in the template When setting up a current BOM you can toggle on or off the automatic objects sorting in each section but you cannot change the sorting rules To change sorting rules in the current BOM you would need to change the style of 235 KOMPAS 3D V9 User manual this BOM containing the desired sorting rules lf automatic sorting in a section is enabled then it to be around each time of the creating a new object in the section and after editing the text portion of an object in the column by which the sorting is done If a section contains subsections then the automatic sorting runs inside the subsections without changing the order in which the subsections follow and without moving objects between subsections Reserved Text Lines Reserved line is a line of a BOM meant for entering further changes into a released printed out BOM Existence of reserved lines in a BOM is mandated by the applicable standards In each sectio
87. the Beat button on the Features of Sheet Body toolbar or pick it by the name from the menu Operations Features of Sheet Body The Beat command is available if at least one sketch is selected The sheet feature ghost display is enabled by default and such ghost is displayed in the Model window with current parameters To specify the side of the base face to place a beat activate the desired switch in 2 Ekne Direction radio group The forward construction direction is the outward direction from the base face the reversed one is inward The current direction of creation is indicated on the screen by a ghost arrow AAA sctect the shape of the beat section by activating the desired switch in the 13 KOMPAS 3D V9 User manual Section shape group select beat ends processing type The beat image is shown on the Preview bar Select a beat creation type from the Method list The number of available creation methods depends on the section shape type Circular U type or V type Enter beat parameters in the respective fields on the Property Bar The set of these fields dependson the selected creation method Note To create a beat with a round section you need to have the height less than or equal to the radius To round base edges enable the Base rounding option and enter the rounding radius The beat construction direction the radius of the base rounding and other parameters depending on the selected section shape and
88. the Operations Sketch command once more or click the Sketch button again The spiral will rebuild to accommodate the new center position If you need to relocate a hole to another flat face call the Change Plane command for the sketch of the hole center Editing Spiral Parameters When editing a cylindrical or conical spiral you can change the values of quantitative and qualitative parameters which were defining that curve at creation but you cannot change the spiral type a cylindrical spiral cannot be converted to a conical one and vice versa After calling the spiral editing command the Property Bar displays the same controls as those used when creating the object You can change the construction method the pitch and the number of coils the starting angle of the spiral the direction of construction and the coiling direction as well as the method of defining the diameter For spirals created by the method By Numbers of Revolutions and Height or By Pitch and Height you can change the height type If the spiral height and or diameter are defined by an object you can change the used object To do this select Objects or Diameter in the Objects list and pick a new object in the Model window for defining the spiral parameter Parameter changes are promptly propagated in the Model window in the way of a ghost spiral with updated parameters After finishing curve editing click the Create Object button on the Advanced Control Pan
89. the axes at the desired angle You can explicitly enter the origin coordinates and the inclination angle of the CS in the fields on the Property Bar The calculation results are displayed in the appearing dialog You can view the results change the measurement units and accuracy or save results to a file 5 To finish viewing results press the Close button If necessary select different boundaries and run another calculation Crer To finalize calculations click the Interrupt Command button on the Advanced _ Control Panel or the lt Esc gt key MP Calculation of Extruded Solids To calculate mass inertia properties of extruded bodies complete the following steps mh Click the button MP Calculation of the Extruded Solids 2 Select closed curves by the cursor one by one circles ellipses splines contours etc serving as the boundaries for the entities subject to the calculation projections of extruded bodies on the plane The objects selected as borders are highlighted Remember that you need to select the boundary of the body of revolution only at one 184 KOMPAS 3D V9 User manual side of the X axis tH 3 If an entity is made by a set of line segments arcs and other open elements click the Select Border by Arrow button on the Advanced Control Panel and then set the desired contour If the border is still open the system will automatically add a temporary closing segment After selecting each boundary
90. the background views Selecting method of grouping layers To change the properties of several layers of the graphical document at once you can create sets of document objects v Layer groups v Layer Properties groups v Filters You can specify the set type in the dialog Group layers 150 KOMPAS 3D V9 User manual If in the dialog the selected choice is Group layers then you can create groups of layers and filters If chosen is the choice Group layer properties then you can create groups of layer properties When selecting such a choice the option Inherit parent item structure is available If this option is enabled then when creating a group of properties its contents will automatically include layers of the parent object In the current document the changing of grouping method is allowed But you need to keep in mind that such changes of properties lead to irreversible changes of the created groups and filters Assigning Groups of Layers Using layer groups allows to simultaneously alter the activity visibility and color of several layers in a same way For example you can make all layers in a group hidden A group may contain layers of a fragment layers of one or several views of a drawing One layer can be contained in several groups When changing the activity visibility or color of a group this option will be changed similarly for all layers which belong to it When including a layer to a group its p
91. the command Save To Container The local fragment will be a saved in its main document If on the other hand you want to immediately save the main document together with the created local fragment to a file on disk then use the command Save With Container to File When the saving command is executed or when the closing the fragment window you will be prompted to enter the local fragment name A name input is required 5 Close the local fragment window Once a local fragment is created and saved it can be inserted in various places in the document To do this complete the following 1 Call the command Management of Fragments from the Edit menu 2 In the displayed dialog of fragment management select the name of the local fragment in the list and click the Insert button 3 The oncoming insertion steps will be the same as for external fragments See Inserting a fragment into a document Later on to start editing a local fragment double click the mouse on any its insertion Deleting fragment inserts from the main document lf some of a fragment s insertions are no longer needed you can delete them from the document without deleting the fragment original itself To delete inserts select them by any applicable means and press the lt Delete gt key Even in the case when all instances of the inserts are deleted from the document the original local fragment will still be stored inside the document If in the f
92. the current before is restored For example at some moment of working with the drawing View 1 was current The view 2 was both background and visible at the time Then the View 2 was made current so that it became active After editing View 2 has been finished the View 1 is current one At this the View 2 became beckground one The methods for assigning the Current status to views and layers are very similar In detail they are provided in the topics Switching between views and Switching between layers correspondingly Switching between views If several views are created in the edited drawing then you may need to quickly switch between them in the course of work You can make the desired view current as well as set up the status of other views using the Document Manager this is described in the topic Modifying a view state 141 KOMPAS 3D V9 User manual However there are faster ways to select a new current view v Select or type on the keyboard the number or name of the desired view in the States of Views field on the Current Status bar and so it will become current v Select the desired view in the drawing s Design Tree and call the context menu command Current v If the desired for you is enabled that is made active and visible double click the mouse on some object of this view The object editing process will be launched and the view in which the object is located will become current The view that us
93. the light blue color Sometimes you need to call the Refresh Screen command in order to have the ghost of a hidden element fully disappear from display To make the hidden objects visible select them in the Model Tree and call the context menu command Show The objects will become visible You can simultaneously hide all coordinate system origins or auxiliary axes or auxiliary planes or sketches not used in any operations or surfaces or cosmetic threads or 3D lines To do this use the command Hide Origins or Hide Construction Axes or Hide Construction Planes or Hide Sketches or Hide Surfaces or Hide Cosmetic Threads or Hide 3D Lines from the Service menu After calling any of those commands all objects of the respective type that exist in the model are hidden At the same time eight check appears beside the command name in the menu signifying that the objects are hidden To have all hidden objects of a certain type simultaneously show up repeatedly called the respective command from the View menu Excluding Objects from Calculation You can exclude from calculations any model features and components When excluding an object from calculations the model rebuilds so as if the specified object is deleted however the information about it is still kept in the document To exclude one or several objects from calculations select them in the Model Tree and call the context menu command Exclude from Calculation After calling th
94. the mouse once or using the arrow keys After that call the command Delete Object A prompt will be displayed asking to confirm the object deletion it will specify the designation code and name of the object Click the Yes button if you sure regarding the object deletion or the No button if the object should not be deleted You cannot undo the deletion of a BOM object If when setting up the current BOM the Delete Geometry when Deleting Item from BOM option was enabled be especially careful when deleting a BOM object since this will cause the deletion of all graphical objects from the assembly drawing that were part of the contents of the deleted BOM object If the Delete Geometry when Deleting Item from BOM option is disabled then the graphical objects will not be deleted from an assembly drawing To find out about including graphical objects from an assembly drawing into an item s BOM contents BOM item geometry refer to the BOM item geometry section How to toggle on or off geometry deletion when deleting BOM object Note BOM objects that belong to its connected assembly document a3d cannot be deleted by the described method Those shall be deleted from the assembly document BOM Items in a BOM A BOM object is the main structural unit of a BOM document the standard file extension is spw Just like a drawing consists of graphical entities and macro elements a text document consist of words and sentenc
95. the scale use the Zoom Out command or press the lt gt key on the 251 KOMPAS 3D V9 User manual number extension keyboard to he You can also return to one of previous display scales of the printable area To do this call the Previous Zoom command in the View Scale menu To go back to the next image scale from the same menu call the command Next Zoom m To go back to the scale under which the entire output area is shown on the screen click the button Show All on the Control bar Is the display scale of the output area is increased only a portion of this area appears on the screen To view other portions of the output area without changing the scale use the image moving command ro call the command click the Move button on the Control bar or pick it by the name _ _ifrom the View menu After that the cursor shape will change it will turn into a four pointed arrow Hold the mouse button down and drag the mouse The displayed area with the placed there documents will be scrolling along with the cursor movement If the screen border is reached and you need to move the output pane even further release the mouse button move the cursor to a desired position and then press the left mouse button again and continue scrolling the working field If you use a mouse with a wheel or a three button mouse then to pan move the image move the mouse and hold the middle button or wheel pressed Selecting printable area You
96. the solid type is selected then you can set the line weight in the screen units pixels Note Lines of text strings and fills are always shown as solid To change the color of drawing background views or placeholder frames of hidden views use the Color button The styles that will be used for drawing are shown in the preview panes to let you immediately watch the introduced changes Once the display settings are done click the OK button If the View Display Settings dialog was called from the Document Manager close the Document Manager as well 145 KOMPAS 3D V9 User manual Layers as an analog of the transparent paper If in conventional paper and ink drafting you experienced creating drawings or diagrams with a great number of elements lines dimensions symbols etc then you know about the use of tracing paper for packaging of similar design documents In this case the designer places various graphical information blocks as if in different logical in terms of selecting this block as a separate unit and physical in terms of placing the block on a separate paper medium levels When using such a breakthrough solution for packaging tasks become greatly streamlined as is editing separate objects of the drawing and in the long run the probability of an error is reduced and the designer s labor productivity is increased At each stage of document drawing development only those blocks are used that are requir
97. then with the NumLock mode turned off the cursor can be moved by the lt 2 gt lt 4 gt lt 6 gt lt 8 gt keys and the arrow keys Miscellaneous lt Shift gt lt select model gt Select whole assembly component select whole part lt Ctrl gt lt drag the selected Copy selected assembly component copy element with the left mouse selected drawing fragment component button gt lt Ctrl gt lt T gt Start picking over the objects under the cursor lt Ctrl gt lt D gt Disable Enable global snaps lt F3 gt Find or replace the following occurrence of the specified text lt F5 gt Rebuild lt F gt Enable disable Parameter Approximation Rounding lt F8 gt Enable Disable orthogonal drawing lt FQ gt Show All lt Alt gt lt X gt Activate fields of the cursor s current coordinates on the Current Status bar lt Ctrl gt lt K gt Switch the cursor appearance large or small lt Shift gt lt gt Activate the Cursor s current step field 22 KOMPAS 3D V9 User manual Techniques of creating and editing objects General information The main task solved by any CAD is creating and delivering documentation How fast you can perform that task and therefore the productivity of working with the system is determined to a large degree by how convenient are tools for creating and editing objects that you will have at your disposition Create an object mea
98. to be displayed in the view being set up 4 When done with settings click the Create Object button on the Advanced Control bar to confirm the changes ghen click the button Rebuilt on the View bar or press the lt F5 gt key to redraw the edited view The described setting is available for all associative views except for the Enlarged Detail and Detail Section views The settings of those views coincide with the settings of their base views If most of the associative views you create display the same set of objects making the described settings for each view is not rational In this case you can set up the current one as well as all future documents so that in their associative views by default the 194 KOMPAS 3D V9 User manual desired objects were displayed To do this call the command Service Options Graphic Document Document parameters View or Service Options New Documents Graphic document Document parameters View correspondingly In the dialog displayed activate the options corresponding to the desired objects Cosmetic thread display in associative views When creating associative model views in drawings which contain cosmetic threads the latter can also be drawn on the views A cosmetic thread will be created in an associative view if a projection plane of this view is Strictly parallel or strictly perpendicular to the axis of the surface on which the thread is created A
99. to the clipboard do the following 1 Select all objects in the document that you want to copy to the clipboard 2 Select the Edit Copy command it is available only if there are selected objects in the active document or press the keys lt Shift gt lt Insert gt or lt Ctrl gt lt C gt Remember that the pre existing clipboard contents will be deleted 3 The cursor will change its appearance to a small coordinate system and the system will be expecting selection of the point that will serve as the base for the selected set of objects You can enter the desired coordinate values in the fields of the Property 162 KOMPAS 3D V9 User manual Bar lf an entire view or several views are selected then the anchor point will be automatically set at the origin of the coordinate system of the zero view the lower left corner of the drawing page After typing the reference point coordinates or selecting its position the highlighted objects will be copied to the clipboard and deleted from the document Pasting objects from the Clipboard Insertion is used for moving an object contained in the clipboard into the desired position in the document To paste objects from the clipboard into the document complete the following steps 1 In the Edit menu pick the Paste command or press the keys lt Shift gt lt Insert gt or lt Ctrl gt lt V gt 2 The ghost of the objects pasted from the clipboard will be displayed Select by
100. value and the size slope of geometrical object will change 208 KOMPAS 3D V9 User manual There is the Info dimension option in the dialog to set the dimension value It controls fixation of selected dimension as well as Show Delete constraints and Fix dimension commands Enabling this option means that the dimension will be informative in this case its value cannot be manually entered otherwise if you disable the option then the dimension will be fixed in this case you can type its value Tip If you need to start editing dimension parameters double click any piece of it outside the dimension text Entering and editing relations between variables One method to apply parametric relations and constraints is defining dependencies between parameters in an analytical form defining equations and inequalities relating the parameters Equations and inequalities are entered and edited in a special window that allows simultaneously viewing all entered dependencies and all existing variables To show or hide the window for working with variables and equations use the command View Toolbars Variables The Equations tab displays the parametric equations and inequalities existing in a current graphic document To start entering or editing an equation activate the desired cell by double clicking the mouse The syntax of equations and inequalities The toolbar buttons Function and Constant serve to specify the functions and cons
101. when you need to change the set of graphical objects belonging to the contents of a BOM object Note If the geometry of a BOM object is a three dimensional object part or subassembly then it cannot be edited The possible scenarios of editing BOM object geometry are Including geometry into the contents of a BOM object Adding graphical objects to the geometry of a BOM object Replacing a BOM object geometry by another geometry Deleting geometry from the contents of a BOM object A typical sequence of steps in any editing scenario of the BOM object geometry 217 KOMPAS 3D V9 User manual contents is 1 Select graphical objects which need to be included into the contents of a BOM object 2 Call the Edit BOM Contents command 3 In the displayed prompt select the option of changing the graphics contents of a BOM object Be careful when changing geometry contents of a BOM object since this operation cannot be undone Input Editing and viewing advanced parameters To work with all types of auxiliary parameters of the current BOM object use the tabs Options and Documents of the Property bar When selecting a BOM object the interface items appear on these tabs that serve to work with the additional parameters Activate the desired tab adjust or enter additional parameters The changes made will be immediately recorded into the current BOM Deleting BOM Object To delete a BOM object focus on that object by clicking
102. window will display the edited KOMPAS document Note We do not recommend resizing by dragging the outline frame of an embedded KOMPAS document during normal operation of MS Word This may cause distortion of the embedded document Refreshing the link to the source file To force refreshing a link between an embedded KOMPAS document and the source file click the right mouse button with the embedded KOMPAS document and select the context menu command Refresh Link Note To perform various actions with links to source files defining the type of refreshing changing the source refreshing or breaking the link use the dialog accessible by the command Edit Links from the MS Word menu Deleting an embedded KOMPAS document To remove a previously embedded KOMPAS document complete the following steps 1 Click on the embedded KOMPAS document It will be framed by a highlighted box 2 Press the lt Delete gt key or select the Edit Delete command in the MS Word menu 261 KOMPAS 3D V9 User manual Import and export Data exchange with other systems Data exchange between KOMPAS 3D V9 and other systems is possible via the following formats for graphics documents v KSF v DXF v DWG v IGES v Vectory 4 X v Vectory 5 X v eDrawing edrw for models v SIEP v IGES v SAT v SIL v WRL v ParaSolid v eDrawing easm for assemblies v eDrawing eprt for parts Additionally it is possible to read documents c
103. 14 KOMPAS 3D V9 User manual sr After finishing curve editing click the Create Object button on the Advanced Control Panel To quit editing without changing the curve click the Interrupt Command button Editing spiral position When editing a cylindrical or conical spiral you can change its position on a face or plane while keeping its original parameters To relocate a spiral select it in the Model Tree or in the Model window You can also expand the section in the Model Tree which corresponds to that spiral and select the sketch contained within Call the context menu command Edit Sketch The system will go into the sketch editing mode with the sketch containing a single construction point This point corresponds to the spiral snapping point while the sketch itself lies on the plane on which the spiral was created Therefore the point indicates the spiral center position on the face or plane Move the spiral center point to the desired location by any method You can use Snaps and or apply parametric relations to the point For example if you need the spiral to be positioned exactlyin the center of a rectangular face you can draw an auxiliary line connecting the diagonal points of the face and snap the point to its middle After that the center of the spiral will stay exactly at the center point of the face throughout any changes in the face dimensions After making necessary changes in the sketch call
104. 4 Click the OK button in the Inserting Object dialog The contents of the selected file will be embedded in the MS Word document Note Be careful renaming or moving files which are sources of linked embeddings since links with those can be broken Editing embedded KOMPAS document To edit an embedded KOMPAS document complete the following steps 1 Click the right mouse button on the embedded KOMPAS document 2 In the appearing menu select the command Object A submenu will appear containing the commands Edit Open and Convert If a KOMPAS document was embedded while maintaining a relation with the source 260 KOMPAS 3D V9 User manual file then the KOMPAS 3D system window gets loaded after calling any command either Edit or Open The source file of the embedded document opens there If a KOMPAS document was embedded without a relation with the source file then after calling the Edit command a KOMPAS 3D window becomes loaded into the MS Word window the MS Word menu and bars are replaced by the menu and bars of KOMPAS 3D The embedded document opens in the KOMPAS window Upon calling the Open command the KOMPAS 3D system starts up The embedded document opens there 3 Make the necessary changes to the document If you were working with an MS Word document click inside it anywhere not on the embedded document lf you were working with the KOMPAS 3D system save the document and close the session The MS Word
105. 5 7 50 Br KMn3 1 8 40 Applying a drawing layout Preparing a drawing layout includes the following steps v Defining properties of drawing sheets v Creating layout elements v Filling the Title Block When you are creating a new drawing the layout styles are applied to its sheets that are used by default in all newly created drawings Drawing layout elements include technical specifications and the unspecified surface finish symbol To start inputting technical specifications call the command Insert Specifications Enter The window for entering and editing technical specifications will appear When working in it you can use all capabilities of the KOMPAS 3D text editor Besides that when entering the specifications text it is possible to create links for example to position reference number symbols When done with inputting technical specifications save them and close the window To change the placement of specifications use the command Insert Specifications Location To create an Unspecified Surface Finish symbol call the command Insert Unspecified Surface Enter The unspecified surface finish properties dialog will appear in which you can specify the symbol s label and parameters To edit the unspecified surface finish location use the command Insert Unspecified Surface Location To start filling the title block call the command Insert Title Block Also you can simply double click th
106. BOM on the drawing is similar to that of the BOM s title block on the display of objects in it Note The list of standard codes and names is defined in the file of codes and names If necessary you can manually edit the existing file or create a new one Exchanging data between a BOM and its connected documents A product s designation and name can be transferred in two directions from a connected document into the BOM and from the BOM to the connected documents Activating and defining data transfer is done in the assembly management dialog The Fill in Title Block button controls data transfer from a connected document into the BOM Upon clicking this button the product s designation and name are passed to the BOM s title block from the document that comes first in the connected list As long as the button is in the pushed state a link between the BOM and this document remains intact When saving the document all changes to the designation and or name are automatically passed on to the BOM If another document appears on the first position in the list then the BOM will receive the designation and name from that document Upon releasing the Fill in Title Block button the data transfer to the BOM s title block will stop The product s current designation and name change neither in the document nor in the BOM The Send Changes to Document column controls product designation and name transfer from the BOM into the connected documents The data
107. Completely disable automatic numbering in this case you will be able to manually enter sheet numbers and their total v Set the number of the first sheet and the predefined number of sheets Note Drawings created in KOMPAS 3D V7 Plus and earlier system versions could consist of just one sheet They do not contain information about the method of numbering pages Therefore when opening such drawings in KOMPAS 3D V8 and later versions their auto numbering will be disabled the system will track neither the numbers of added sheets nor their total To enable auto numbering open the sheet numbering settings dialog and enable the Automatic Page Numbering option in it Defining the properties of a drawing sheet Defining the properties of sheets is done in the Document Manager dialog Activate the Sheets element in the Tree of Sheets Views and Layers of the current dialog The List of Sheets Views and Layers will display sheets of the drawing The interface items of the list serve to view or modify sheet property values An icon in the Orientation entry shows the current sheet orientation To modify it 138 KOMPAS 3D V9 User manual click the respective sign with the mouse The icon will change as well To change a sheet format by selecting one of the standard A0 A5 formats open the list in the Format at entry and select the desired format designation If you need to define a nonstandard format call the Format command from
108. ETT 12 COO OI ALS SyS ENI Sena A 12 System SEUNS esera E E ore eee 13 General Systemi SOU srera T dupa bo daueti wad smueadcher 13 SOMMGUNATION SGUN sson E A a Seueaaned 13 WS GI Sal POMC Oaeei eega ie teas Gallaher Gare Renae decal meee tesie hussain Measenet ahs 15 Obtaining licenses for working with the system of three dimensional solid modelling and WIth BOM GESION SYStCM wesiwsicitesicretentvonrexeenyientededeeingsneebeauevewnsnledieetaweteiestecledueitinerdosexets 15 General WORKING TECHNIQUES sarsie tate ct ariueddnudensanahar tassel n 16 Creating opening and saving KOMPAS 3D documents ccccceeceeeeeeeeeeeeeeeeaeeeaees 16 Document Windows Management ccccscccsecceeeceeeecseecasecaueeceeecaeesaueseaeesaeesseesagesass 16 Cursor and S OD STAN ON mda saitate sciences A A A 17 selecting hidden overlapping or closely located ODjeCtS ccccecccseeeeaeeeceeeeeeeeeeeaees 17 Managing document display in a WINKOW ccccccseccceeeceeeeeeeeceeseueeseeseeeseeeseeseeseeeaes 17 BI AS seats coc ameuaaceaueniaae satene neces dashantapeaananiaisGamasne sade saaeaaaceiacbantesaaauateae en santceecnamenwieaanaeaaa 18 Selecting and deselecting ODjeCtS cccccceccsssceceeecceseeceeeseseeseessueeeeeeseecaeeeeeseeseeenees 19 SING ME OIG wages conten ahscaeeett case a Miata denaaeteat ini atinnds 19 System accelerator KEYS snac a obtains oa eee ined LAR 20 Techniques of creating and editing ODJeCtS
109. Enter a new name for the group and click the Create New Group button 4 To close the dialog click the OK button Adding objects to a group You can add more objects to an existing named group To add objects to a group complete the following 1 Select all objects which shall be added to the group see also the topic Selecting objects by the mouse 2 Call the command Service Groups The dialog for creating and editing named groups will appear 3 In the list select the name of the group to which the selected objects shall be added and click the Add to group button 4 To close the dialog click the OK button Excluding objects from a group To exclude some of the member objects from a named group complete the following steps 1 Select all objects which shall be excluded from the group see also the topic Selecting objects by the mouse 2 Call the command Service Groups The dialog for creating and editing named groups will appear 3 In the list select the name of the group from which the selected objects shall be excluded and then click the button Exclude from group 4 To close the dialog click the OK button Selecting objects belonging to a group Objects that belong to a named group can be selected for performing oncoming operations The whole purpose of joining elements into a group is the convenience of searching and selecting them To select objects belonging to a group complete the follow
110. Fixing parameters Releasing parameters You can use the keyboard to work with Property Bar controls The main actions and the keys used to perform them are shown in the table Actions Keys Jumping from one control to another lt Tab gt in the forward direction lt Shift gt lt Tab gt backward Picking over list values lt Down arrow gt lt Up arrow gt Picking over switches in a radio group lt Right arrow gt lt Left arrow gt Activating the switch focused on lt Space gt Rounding parameter values When working with KOMPAS documents you can turn On rounding of linear values This function is used in various commands creating and editing graphical and three dimensional objects Switching On and Off the Rounding mode in the current document window windows is done by the Rounding button on the Current Status bar or by the F7 key When On parameter values are rounded to the nearest value a multiple of the cursor current step The value is rounded to the smaller one if the difference between the value and the nearest multiple is less than half the cursor step otherwise it is rounded to the greater one Let s review working in the rounding mode in detail based on a rectangle creation example For this do the following Create a new graphic document Make sure the rounding mode is turned Off If not so switch it off Set the cursor step equal to 5 mm ican the Rectangle command Se 2 hf Sp
111. KOMPAS 3D V9 User Manual KOMPAS 3D V9 User manual Copyrights Information in this document is subject to change without notice No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or any means electronic or mechanical including photocopying and recording for any purpose other than the purchaser s personal use without the written permission of JSC ASCON ASCON JSC Tel 7 812 703 39 33 703 39 34 Fax 7 812 703 39 33 E Mail contact ascon ru Address 193 Obvodnogo Canala nab St Petersburg Postal address 198095 St Petersburg PO Box 107 URL http www ascon net 2007 ASCON JSC All rights reserved KOMPAS 3D V9 User manual Contents VVOICOMO Uen Nees seine one Reenter Ore E E ner nnn eer 4 Technical Support and Maintenance ccccccceeeceeeceeeecseeteseeeneeeeeeeeeeceeeesecseneeeeeeeeeeeaeenees 5 SV See Th NENI CE asera ai Aacedtprcares ace aectis E E eae remein uence 6 USINO Context IM CIN vie feet scenes eater eee E eatetadtcecannanueenee T CUSTOMIZING IMG ACS sE rE EREE 7 General System NTO IMA OM wiettactiarteateccts ioe iuatd acho wd etdaalea bleu tiestouajnndiut lacliaheteasame de eecstaeets 10 KOMPAS 3D Document TYDES ccccecccsececeececeeceeeeeeceeceseueeseuceseeeeseeeseeseeeeeeseeseeeeeges 10 FIO TYPOS seee an e a ieinee oeade ivaceat ees OENE 11 WIN E EE E cca E EEE O E tte aud E TEET aah E E E EE O E T ETET A A
112. Manual data input If graphics objects from a drawing are included in the contents of a BOM object then the up to date information will be entered in its columns Zone and Position automatically If you connect KOMPAS 3D a drawing to a BOM object then the up to date information in the object columns Format Designation and Name will be passed automatically from the respective entries of the connected drawing title block This is described in detail in the section Semi automatic data input Manual data input When filling in the text portion of a BOM object it is required that the user could type in the columns data from the keyboard In the text input mode you can access the font and paragraph formatting commands as well as the commands for inserting ratios sub superscripts overline and underline Special Character symbol When entering symbols into a column their horizontal spacing compression is automatically adjusted to fit them all in one cell If the horizontal character compression is too much you can wrap some of the characters to the next line to do this press the lt Enter gt key at the wrapping position The text cursor is moved within the column using the keys lt Right arrow gt and lt Left arrow gt The lt Down arrow gt key moves the text cursor to the position before the first symbol in the column and the lt Up arrow gt key into the position of the last symbol Move between columns using the lt Ta
113. OM style is introduced to create documents on a form that is missing among the existing styles Creation of separate styles is not justified if those differ only in the parameters that can be set up for each particular BOM for example by the number of reserved lines in a section 243 KOMPAS 3D V9 User manual General information about KOMPAS 3D text editor The text processor is an inherent part of the KOMPAS 3D computer aided design system for Windows The main area of its use is developing various text and graphics documentation By developing we mean creating editing and printing design technology project and other documents Documents can be laid out according to standards or be of an arbitrary format Integration of a text processor in KOMPAS 3D helps direct exchange of text and graphics information between various documents and helps users considerably in designing both textual and drafted documentation Additionally using Windows standard TrueTy e fonts provides high quality practically typographical quality of the resulting documents when using modern output devices laser or jet printers and plotters This is a valuable feature when preparing various materials for technical meetings and exhibitions Therefore KOMPAS 3D allows you not only to prepare a drawing or a schedule but also produce a billboard poster a technical brochure or ad hoc advertisement materials Note however that despite a wide range of capa
114. S documents can be inserted in other documents Inserting specific KOMPAS objects via the Clipboard is not currently supported KOMPAS 3D uses its own clipboard other than the standard Clipboard You can make the embedding in such a way as to preserve relation with the source file and maintain automatic updating of the embedding whenever changes are done to the source file In the future to describe the use of OLE technology we will use the example of interaction KOMPAS 3D and Microsoft MS Word programs Interaction with other Windows applications goes on similarly with differences possibly observed only in specific decoration of commands and dialogs of those applications Embedding KOMPAS document from an external file To embed a KOMPAS document from an existing file into an MS Word document complete the following steps 1 In MS Word call the command Insert Object 2 In the dialog displayed activate the Create from File tab If you want the embedded KOMPAS document to be displayed in the MS Word as an icon turn On the option As Icon If you need to maintain the relation of the embedded KOMPAS document with its source file turn On the option Link to File After that any change to the source file will be reflected in the document in which the embedding was made 3 Enter the full name of the file being embedded in the File name field You can also click the Browse button and specify the desired folder and the document file
115. V9 User manual E The switch Show Item in Table controls the object display in the BOM table makes the object visible or invisible Hiding and object does not result in this object deletion but just temporarily until enabling the display makes it invisible in a BOM While working with a BOM you can turn on the mode in which all BOM objects are shown and printed whether the visible or the hidden ones using the described auction To do this call the command Show All Objects Attached documents A BOM object can be connected with KOMPAS 3D documents This relation is two sided and associative and it allows transferring data about a BOM object into the connected document or vice versa the data from a document into its respective BOM object To connect documents to a BOM object select that object Parts List Documents Ope tsye H Send Document Com 9 C Program Preview Off ale Options Documents A bar to work with attached documents appears on the Documents tab of the Property Bar The tab contains the list of documents connected to the object By selecting the name of any of them you can enter or view the comment to the document in a respective column of the table is To connect a document to a BOM object click the Attach button and in the displayed dialog specify the path to the document file and its name When connecting the first document the system we will display a query about usi
116. V9 components allowing to produce various BOMs schedules and other table documents A Parts List document can have associative relations with an assembly drawing its one or multiple sheets and the three dimensional assembly model We assure you of the right choice you made by starting collaboration with ASCON Corporation one of the leading firms developing Computer Aided Design systems KOMPAS 3D V9 User manual Technical Support and Maintenance When experiencing any problems with installing and using ASCON s software please use the following sequence of steps Refer to the system documentation and try to find information about fixing the encountered problems Refer to the interactive Help system If possible visit the ASCON Customer Technical Support site which contains answers to frequent users questions Customer technical support site http ascon net fag You can also refer to the ASCON software Users Web Conference Users there share observations about problems they encountered as well as hints and tips ASCON software user forum http ascon net forum If the mentioned sources do not have recommendations regarding the problem you have get help from the technical support service of your vendor of company s products an ASCON dealer If your vendor could not help you with the problem please contact ASCON directly Direct Technical Support E mail support ascon ru Before contacting please prepa
117. Y axis of CS 21 KOMPAS 3D V9 User manual lt Ctrl gt lt Alt gt lt 3 gt Move the cursor by one step in the positive direction of OX axis and the negative direction of OY axis of CS lt Ctrl gt lt Alt gt lt 4 gt Move the cursor by one step in the negative direction of OX axis of CS lt Ctrl gt lt Alt gt lt 6 gt Move the cursor by one step in the positive direction of OX axis of CS lt Ctrl gt lt Alt gt lt 7 gt Move the cursor by one step in the negative direction of OX axis and the positive direction of OY axis of CS lt Ctrl gt lt Alt gt lt 8 gt Move the cursor by one step in the positive direction of OY axis of CS lt Ctrl gt lt Alt gt lt 9 gt Move the cursor by one step in the positive direction of OX axis and the positive direction of OY axis of CS If the NumLock mode is Off the NumLock indicator is not lit then movement in the following directions as possible lt Ctrl gt lt Alt gt lt 2 gt Move the cursor by one step in the negative direction of OY axis of CS lt Ctrl gt lt Alt gt lt 4 gt Move the cursor by one step in the negative direction of OX axis of CS lt Ctrl gt lt Alt gt lt 6 gt Move the cursor by one step in the positive direction of OX axis of CS lt Ctrl gt lt Alt gt lt 8 gt Move the cursor by one step in the positive direction of OY axis of CS Additionally if no command is called
118. a design process when you need to measure distances or angles from some point or object in the drawing area When working on a conventional drawing board the designer moves the rulers to the desired point and makes constructions from it turning the rulers if necessary You can use a similar technique in KOMPAS 3D by using local coordinate systems LCS By setting LCS s at the certain points of a part or mechanism being developed you can quickly select any of them and make it current In this case all coordinates will be calculated and displayed relative to this coordinate system For example it would be convenient to set a local coordinate system at the center of an end face of a designed body of revolution For searching and selection convenience each LCS can be assigned a unique name When an LCS is no longer needed you can quickly delete it from the document Creating the first local coordinate system To create the first local coordinate system in the document do the following 1 T Call the command Insert Local CS or click the Local CS on the Current Status toolbar 2 After calling the command the image of a local coordinate system appears on the screen that can be dragged by the cursor Fix the LCS origin at the desired point then rotate it by the desired angle and fix the final position You can enter the desired snapping point coordinates and the inclination angle of the LCS in the fields on the Property bar By defaul
119. a file can later be used as a base for creating new curves After defining all spline polyline parameters click the Create Object button on the Advanced Control Panel The created spline polyline will appear in the Model window and the icon corresponding to the curve type in the Model Tree ta Spline icon in the Model Tree TT Polyline icon in the Model Tree Point command Serves to create a point in the space To call the command click the Point 3D Lines toolbar or pick it by the name from the Operations 3D Lines menu The point position in the space can be defined by three methods v By coordinates Enter the coordinates of the point being created in the fields X Y Z of the Property bar and fix by pressing the lt Enter gt key v Arbitrary Click the mouse at an arbitrary point in the model window The position of the created point will be the cursor projection on a plane parallel to the screen plane and going through the origin The point coordinates will be defined automatically and fixed in the X Y Z fields of the Property bar If the values of one or two point coordinates are known enter them in the respective fields and fix After that as the mouse moves in the model window only the unfixed coordinates will be changing 100 KOMPAS 3D V9 User manual v With snapping to a reference point Move the cursor to the desired reference point When the symbolic notation of the point appears
120. a straight line segment or a polyline segment is used as a bend line and the face being bent has a complex shape then for the bend to be constructed correctly we recommend positioning the bend line in such a way as to explicitly go through all portions that are meant to be bent iia To call the command click the Release button on the Features of Sheet Body toolbar or pick it by the name from the menu Operations Features of Sheet Body Specify a base face of the release and a bend line The sheet feature ghost display is enabled by default and such ghost is displayed in the Model window with current parameters v Select the direction of counting the angle v Define the fixed side v Select an option for interpreting the angle and define the angle value in the Angle field Note The incision bending angle value should be greater than O and less then 180 degrees the complimentary angle greater than 0 and less than 360 degrees v Choose a bend radius type and enter the value in the Bend Radius field v Select bend type v Select the method of defining flat pattern length Note The specified value and method of defining the radius as well as the default method of defining flat pattern length are used for both incision bends Later on you will be able to assign individual parameters to each of the bends v Select the option of defining the incision size and enter the distance value v Using the option With adding material
121. a surface and by a sketch When editing a trimming by a surface you can choose a different trimming direction and or define another trimming surface when editing a trimming by a sketch you can select a different trimming direction You can also change the operation s applicability range The trimming boundary type cannot be changed for example you cannot turn trimming by a surface into trimming by a sketch After calling the command the Property Bar displays the same controls as those used when creating this object and the trim boundary is highlighted in the Part window To select a different trimming surface click the mouse on its image in the Part window or on its icon in the Model Tree You can change the trimming direction by activating the appropriate switch in the group Direction of Trimming Direct Direction or Reverse Direction of Trimming on the Property bar To set up the operation s range of applicability click the Application Area button on the Advanced Control Panel sr To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command button Mirror copy When editing mirror copy parameters you can select a different plane flat face which is to become the symmetry plane When editing a mirror copy of individual elements you can change the set of copied elements When editing a mirror copy of an entire part it cannot be converted to a mi
122. a three dimensional model uniting models of parts subassemblies and standard items those are called assembly components along with the information about relative position of components and dependencies between parameters of their elements You can define an assembly composition by adding new components to it or deleting existing ones Component models are stored in individual files on disk The assembly file keeps links to these components You can define relative position of assembly components by specifying parametric relations between their faces edges and vertices for example faces of two parts being coincident or a bushing and a hole being coaxial Such parametric relations are called mates Refer to the following reference sections regarding methods of designing KOMPAS 3D assemblies Bottom Up Design Top Down Design Mixed design approach Assembly design Bottom Up If all components to make up an assembly already exist in the files on disk then you can add them to the assembly and then establish the necessary mates between them This design method resembles the actions of an assembly worker who sequentially adds parts and mechanisms to an assembly and fixes their relative positions Although seemingly simple this design method is used very seldom and solely when creating assemblies made of a small number of parts This is because the shape and dimensions of parts in assemblies are always interrelated To model i
123. able with objects is a BOM of the current style without frames and without the actual stamp When creating new BOM objects in a drawing those are automatically included into a BOM table on the page Double clicking the mouse on the table launches the slave mode of editing BOM objects All changes made in it after closing the mode window are passed into a BOM on the page You can use the Locate on New Sheet switch to arrange BOM onto sheets It is Javailable on the Property bar in the slave mode of working with BOM items To move the table around the page use the command BOM Location in the BOM menu or the Manual Location of BOM context menu command By default upon calling the BOM on Page Show command a single BOM is displayed the current style one To enable placement on the sheet of other BOMs connected to the drawing or some of them call the BOM description management dialog In this dialog enable display on page of the desired BOM descriptions BOM name on a page The specification name the text over the table of the specification allocated on a leaf The specification name can consist of several strings The name text is entered by the user Thus it is possible to set various names for the first and the subsequent pages of the specification To enter the specification name fulfil following operations 1 Enable specification dispaly on a sheet having called the command BOM BOM on sheet Show
124. actual geometrical dimensions in KOMPAS 3D system at once i e before creating an image Image scalling reducing in 2 5 times will be automatically performed by the system Actual values of dimensions will be automatically calculated by the system when dimensioning If you find in the future that the scale needs to be modified the image doesn t need to 136 KOMPAS 3D V9 User manual be re drawn later recalculating the dimensions You will just need to change the scale of the view in which this image is located When creating a new drawing a system view with the 1 1 scale is automatically generated and it Settings of the system view cannot be changed Therefore if you need to create an image in a drawing to a scale other than 1 1 you first need to create a new view with the desired scale lf you use the same scale for most of drawings for ease of use you may enable the default creating of view under required scale in a new drawing in the New View Properties dialog The scale defined by this setting will be automatically propagated to the respective entry of the title block in newly created drawings Section Each view includes a special text object the view designation symbol A view designation symbol is used to automatically create and update the designation symbols for v Cut v section view v Enlarged Detail v View in Arrow Direction A view designation symbol consists of the elements Letter Symbol reo
125. agment inserting mode On a tab Parameters of the Property bar will appear controls for insert 4 Customize insertion parameters on the Panel of properties and specify position of a base point of a fragment oP Fulfil necessary quantity of inserts and press the Interrupt Command button Calculating Mass I nertia properties MP KOMPAS GRAPHIC allows running mass inertia property calculations for individual parts and for assemblies Supported are calculations of the mass of a part assembly the center of mass gravity coordinates planar axial and centrifugal moments of inertia The two dimensional model framework supports calculations of 2D shapes bodies of revolution or revolved sectors and extruded bodies The properties can be calculated in the document coordinate system or in a dedicated coordinate system introduced specifically for the calculations When calculating mass inertia properties of bodies in the KOMPAS GRAPHIC system the following rules are accepted 1 The center of mass coordinates are calculated in the current coordinate system or in a one specifically defined for the calculations The moment of inertia properties are calculated in the coordinate system located at the center of mass that is those are the centered moments of inertia 2 When selecting an object s own coordinate system remember that KOMPAS GRAPHIC operates with a right hand oriented OXYZ coordinate system where v For bodies of revolution
126. all opened and new drawings and fragments 205 KOMPAS 3D V9 User manual If the Parametric mode by default is not enabled or you want to change settings only for the active document do the following 1 Call the command Service Options Current Document Adding Constraints 2 In the displayed dialog activate the desired options for the constraints to be applied 3 Click the OK button to exit the dialog and save the settings made that will from now on work for the active graphics document Creating a new parameter image The difference between a parametric image and an ordinary one is that the former supports various relations between objects Some of the relations are introduced by the system automatically as the objects are created from here on it is assumed that the parametric mode is enabled as described in the section Activating and setting up parametric mode properties Such automatically applied constraints include snaps parallel perpendicular tangency symmetry assigning base lines for layout objects No action is required when inputting objects However you must keep in mind that object coincident points are parameterized via the snaps that were activated when selecting those points At the same time it doesn t matter what snap was active a global or a local one A point selected simply nearby of another point without activating a snap will not be constrained By a point we mean here not a geomet
127. ally by typing directly in the respective fields However KOMPAS S3D also offers another input capability direct reading of parameter values from a drawing To do this use the so called Geometric Calculator Let s consider the situation when a segment is being drawn The line segment and point coordinate input fields are provided on the Property Bar together with those of inclination angle and length Set the cursor over some field and click the right mouse button you will see the menu of Geometric calculator commands where the set of commands depends on the 159 KOMPAS 3D V9 User manual parameter type For example if you call the Geometric calculator over the field for entering the line segment length then the offered commands will be exactly those for reading length distance between points element length etc For the angle input field the menu will appear respectively for reading angular values while for coordinate fields the menu for reading coordinate values it is practically identical with the snaps menu ange J Line Direction 1 is Tangent Slope Normal Slope Included Angle Between Lines li Slope of Ellipse Axis By 2 Points ho x Axis By 3 Points Text Line Direction By Poink on Circlel Arc Let s review the use of the Geometric calculator on a simple example of drawing a line segment parallel to another segment Click the right mouse button o
128. ame Drag amp drop the command to the desired panel Release the mouse button The command will appear in the specified location Command names can be enhanced by icons accepted in KOMPAS system by default If a default icon is missing then only the command name appears on the bar You can customize Toolbar button appearance To restore the default button appearance on the toolbar call the Reset command from the context menu of this button To delete a button from the toolbar from this context menu call the Delete command KOMPAS 3D V9 User manual You can change placement of the menu commands and their groups on toolbars by dragging them by the mouse To modify the length of the field click the mouse inside it and then move the right border of the field by the desired distance You can toggle the display of toolbar buttons on and off even without calling the Customize Creating a user toolbar You can create User s toolbars Such bars can host the buttons for calling commands from any categories To create a user toolbar call the command Service Customize Activate the Toolbars tab and click the New button In the displayed dialog enter the name of the new bar and click the button Apply After that the new bar appears on the screen Initially the bar does not contain buttons to call commands You can customize toolbar contents Compact Toolbar If you are experienced in working with KOMPAS 3D 5 X then you will not
129. amed and also hidden in the model window Another coordinate system symbol is displayed in the lower left corner of the model window It consists of three thick arrows red green and blue indicating positive directions of the X Y and Z axis respectively It spins together with the model just like the symbol at the coordinates origin but unlike the latter does not pan and cannot be turned off Examples of Creating model Starting part development A part may consist of one or multiple bodies Creation of a part begins with creating a geometry producing feature of one of the following types v Extrusion Feature v Revolution Feature v Sweep Feature v Loft Feature v sheet body When starting a model creation the designer is always facing the question in what order to proceed with the construction and what element to start with To give an answer one needs to have at least a vague idea of the would be part s design Think of this product without chamfers rounds slots and other small design elements break down the part into its building features blocks prisms cylinders cones tori sweeps etc Despite the fact that one can start a construction from any feature the most common approach is to create the largest of them first If a part includes several features comparable in dimensions then one could possibly create several bodies and then join them in order to build the part Some parts for example segmen
130. ameters For example the thickness of a gasket created directly in assembly is automatically fit to fill in the space between parts in the Bottom Up design the user would have had to calculate the distance between the parts and set the respective thickness of the gasket if the distance between the parts would change due to editing models the gasket thickness will also change automatically should the gasket model have been created separately its thickness would have remained the same so that upon the rebuilding neighboring parts that gasket could have failed to fill the gap between them or vice versa intersected with parts bodies This design approach is preferable compare it to the Bottom Up design It allows automatically defining parameters and shape of interrelated components creating parametric models of stock items Using the drafting analogy proposed in the previous section one can say that in the Top Down design the assembly drawing is created first and only after that and based on it the part drawings Mixed design approach In the real life the most often used is the Mixed design approach that combines the Top Down and Bottom Up design techniques The readily available component models are added to an assembly which define the main assembly characteristics along with models of standard items For example when developing a gear box the individual gear part models are created first and then those parts
131. and revolved sectors 182 KOMPAS 3D V9 User manual v the generatrix contour of the body of revolution lies in the YOX plane v inthe screen s plane on one side of the X axis v The contour is revolved about the X axis v The coordinates origin lies on the axis of revolution at an arbitrary point thereof v For revolved sector bodies the angular length of the revolution arc is defined For extruded bodies v the extrusion contour lies in the YOX plane in the screen plane v The coordinates origin lies at an arbitrary point on the extrusion contour plane v The extrusion is made in the Z axis direction When calculating properties of bodies of revolution or extrusions you can select a material density from a reference database The file that keeps density values is available for editing and can be modified by the user The calculated Mass Inertia properties of an element are saved in a file with the extension SBW The file name will be requested by the system when saving MP Calculation of 2D Shapes To calculate mass inertia properties of 2D entities complete the following steps Eh Click the MP Calculation of 2D Shapes button on the Measure toolbar 2 Select closed curves by the cursor one by one circles ellipses splines contours etc serving as the boundaries for the entities subject to the calculation ls If an entity is made by a set of line segments arcs and other open elements click the Select
132. ans select the objects whose constraints need to be deleted Bl 2 Click the Delete All Constraints button on the Adding Constraints bar All constraints will be removed from the selected objects When deleting constraints on geometrical objects constraints are also deleted from all associated layout objects 210 KOMPAS 3D V9 User manual KOMPAS 3D BOM General Information BOM BOM is a KOMPAS 3D document type the standard file extension is spw To create BOMs you need the BOM development system Using it helps speed up by several times the process of creating BOMs schedules and listings while eliminating errors of filling them v There are the manual and semiautomatic BOM filling modes In the manual mode all BOM entries are filled by typing on the keyboard In the semiautomatic mode some of the entries are filled by specifying the data source v a drawing or a model for example the user can specify that the Designation column receives text from the Designation entry of the drawing stamp the title block of the respective part v ABOMcan be composed based on an ready assembly drawing including drawings created in previous versions of KOMPAS 3D v When inserting standard items into a drawing or model bolts nuts bearings pipes etc from the Designer s Library shipped with the system installation then their designation details name parameters standard code are generated and entered into a BOM automati
133. ar values the following commands are available Line Length Line Segment Length Between 2 Points Between 2 Points on Line Between Two Lines From Point to Line Radius Diameter Ellipse Semi Axis Text Line Length Object Extents v When entering angular values the following commands are available Line Direction Tangent Slope Normal Slope Included Angle Between Lines Slope of Ellipse Axis By 2 Points to X Axis By 3 Points Text Line Direction By Point on Circle Arc v When entering the scale values the following commands are available Line Length Ratio Radius Ratio The call the desired parameter reading method select its name from the menu 161 KOMPAS 3D V9 User manual Using the Clipboard When working with drawings it may become necessary to copy or move some portion of the image within one document or to other documents KOMPAS 3D uses its own proprietary graphical clipboard mechanism not the standard Windows clipboard By selecting the desired portion of the image and copying it to the clipboard you can then insert the clipboard contain objects into the same or another document loaded into the session In this case there is no need to cross out same or very similar objects many times in a row The amount of information that can be put in the clipboard is unlimited The clipboard contents is saved on disk in a special system file The clipboard helps quickly and conveniently copy or move drawing objects However
134. arest element along the diagonal between the positive direction of the OX axis and the negative direction of the OY axis of the current coordinate system lt Ctrl gt lt 4 gt Snapping to nearest element along the OX axis lt Ctrl gt lt Left Arrow gt negative direction of the current coordinate system lt Ctrl gt lt 6 gt Snapping to nearest element along the OX axis lt Ctrl gt lt Right Arrow gt positive direction of the current coordinate system lt Ctrl gt lt gt Snapping to nearest element along the diagonal between the negative direction of the OX axis and the positive direction of the OY axis of the current coordinate system lt Ctrl gt lt 8 gt Snapping to nearest element along the OY axis lt Ctrl gt lt Up Arrow gt positive direction of the current coordinate system lt Ctrl gt lt 9 gt Snapping to nearest element along the diagonal between the positive direction of the OX axis and the positive direction of the OY axis of the current coordinate system Stepwise cursor movement The keys are used on the number extension keyboard The NumLock mode must be enabled the NumLock indicator is lit lt Ctrl gt lt Alt gt lt 1 gt Move the cursor by one step in the negative direction of OX axis and the negative direction of OY axis of the current coordinate system CS lt Ctrl gt lt Alt gt lt 2 gt Move the cursor by one step in the negative direction of O
135. arious thicknesses radii and bend angles The block structure is the same v The sheet material thickness is constant throughout a data block Its value is entered in brackets For example in the above table fragment the thickness value is in the upper left corner of the block v The first line of the block contains bend radius values Those are positioned in the ascending order left to right v The left column of the block contains bend angle values Those are positioned in the ascending order top down v Blocks in a table are positioned in the order of increasing material thickness v Values in a table are separated by spaces or tabs If a table is used then the values are not extrapolated if the thickness bend J N radius or angle is outside the range of table arguments then an error message is displayed Working with Bend Tables To be able to use a specific bend table in sheet parts you need to set this table file first in the sheet body properties dialog To get the flat pattern parameter for the bends of a new or edited sheet feature of the current part from the table complete the following steps 1 On the Options tab of the Property Bar access the Method of defining flat pattern length list 2 Select a Bend Table row from the list In the field Source File you will see the name of the bend table selected when setting up sheet body properties If the Bend Table option was enabled when setting up sheet body prope
136. arts General information about 3D macro elements A three dimensional macro element is a group of model objects By grouping objects logically into macro elements you can lay out a model s Model tree in a more compact way This simplifies navigating through the Tree especially when working with complex models containing numerous objects It is helpful to group objects into macro elements when those share a common function or design purpose Objects included in a macro element are displayed in the Model Tree as dependent objects of that macro element The steps of working with them is the same as with objects not included in macro elements those can be edited excluded from calculations deleted etc Besides the objects included in any macro element can be used in operations for example copying Three dimensional macro elements can be nested The number of nesting levels is unlimited In other words you can include into a macro element several existing macro elements objects belonging to any of the existing macro elements 102 KOMPAS 3D V9 User manual When selecting a macro element icon in the Model Tree all member objects of that macro element are highlighted in the Model window 103 KOMPAS 3D V9 User manual Creating a 3D macro element To create a new macro element in a model call the command Service Create Macroelement af A macro element containing no objects will appear at the bottom of the Model Tr
137. at pattern The current part will be displayed according to 74 KOMPAS 3D V9 User manual its stored flat pattern parameters The document name in the window title is appended with the word Flat Pattern in parentheses In the flat pattern mode you can view the part or measure its geometrical and mass inertia properties Editing the part is impossible in this mode Tip For the convenience of viewing the flat pattern of the part you can use the Flat pattern orientation To switch to the normal mode of working with the sheet part call the command again Setting flat pattern parameters Before switching to the mode of displaying the flattened sheet part you need to set up the flat pattern parameters select the fixed face and define bend states To set the flat pattern parameters call the command Operations Features of Sheet Body Flat Pattern Parameters The Property Bar will display controls for setting up a flat pattern Select a fixed face of the part a To define the states of bends in which the latter will stay through the flat pattern mode activate the switch Select Bends After that the Bends bar will become available Eal After setting up flat pattern parameters click the Create Object button on the Advanced Control Panel The settings made will be stored in the part Flat pattern drawing Associative views of KOMPAS 3D drawings support creation of flat pattern images of sheet parts according
138. ates axial and centrifugal moments of inertia directions of the principal axes of inertia A The buttons for calling measurement commands are located on the Measure t Aitoolbar To switch to this bar click the Measure button After calling the measurement command a dialog will appear on the screen for getting and saving information on the conducted measurements Select objects to measure one after another The results of those measurements will appear in the dialog You can make several measurements without exiting the command The system will 129 KOMPAS 3D V9 User manual remember and display in the dialog all values of these measurements You can save measurement results in a text file by calling the command File Save of the Information dialog To exit the measurement command click the Interrupt Command button on the Advanced Control Panel or the Close button on the Information dialog Object info x By operation with model you can receive help data on any object of a detail or lassemblage an edge a side a unit a surface a component etc Normal info v Measurement number v The object name v Object type v Data on object type are taken from the mathematical description of the object Example v The edge can have type straight line a circle arc spline NURBS etc v The side or surface can have type plane toroidal lattice surface a spline surface etc some objects for example the poin
139. ative dimension can be fixed or informational A fixed dimension is marked by a frame around the dimension text displayed in the color of constraint symbols by default turquoise The purpose of a fixed dimension is to maintain its measured value angle or radius unchanged through any object editing A dimension can be unfixed i e you can convert fixed dimension into info dimension with the Show delete constraints command or set i e convert any informational dimension into fixed one with the Fix dimension command any time you wish D Show Delete Constraints button Fix Dimension button Note However not every info dimension can be fixed If geometrical relations between objects and parametrical relations and constraints set for geometrical objects prevent it then a message will be displayed in which the system will inform you that the dimension can be informative only The value of associative dimension and geometry configuration which is controlled by the dimension can be modified only in the case if the dimension is fixed Do the following to modify the dimension value 1 Double click the left mouse button on the parametric dimension text The dialog to set the dimension value will be displayed H Another way to call the dialog is to click the button Modify dimension value on the dding Constraints bar and specify the dimension which needs to be modified 2 Enter the dimension value and click the OK button Dimension
140. b gt key to move left to right or the lt Shift gt lt Tab gt keys to move right to left You can also enter the desired column of a BOM 22 KOMPAS 3D V9 User manual object by clicking it with the mouse After entering the text portion of a BOM object you need to confirm the object creation fix it This can be completed by the following methods v Ifa BOM object is created in a BOM or in the slave mode click the mouse outside the lines occupied by the object v Ifa BOM object is created in a special dialog in a graphics document click the OK button of that dialog v While in any mode of creating BOM objects press the keys lt Ctrl gt lt Enter gt Using Text Templates When entering the text portion BOM object it is possible to use text templates Working with text templates in a BOM is practically none different from working with text templates in text and graphics documents The text templates to insert into a BOM can be stored in a separate file pdt not necessary in the same file of text templates that is used by graphics and text documents The file name of text templates from which those are inserted into the current BOM can be specified in the BOM settings dialog By default the file of text templates is used that was specified in the style of the current BOM To insert a text template into a column of a BOM object you need in the mode of editing the text portion double click the mouse on this column
141. be connected to an assembly drawing A BOM connected related with an assembly drawing can be created by different means v Create BOM objects in the drawing Then connect an existing BOM to the drawing and pass the objects into it save the resulting BOM v Create objects in the existing BOM Attach to assembly drawing to the BOM Add to BOM objects the graphics objects from a drawing Transfer BOM objects from a BOM into a drawing The first method is preferable to the second one Filling in the BOM A BOM is filled in by creating new object in it both main and auxiliary BOM objects can also be created in the connected to assembly drawings or assembly documents and then passed into a BOM In the BOM document and in the slave mode window you can see the text portion of BOM objects The rest of the information about objects is not visible in the common working mode with a BOM and is not printed it is used for reference purposes as for example the values in the additional columns or to automate data input in the object columns as for example the connected to the objects document and BOM objects geometry By the command Add Main Item the system creates a new BOM object and goes into the editing mode of its text portion in the BOM table a line opens for editing in which the text portion of a BOM object will be located The user can manually enter the text portion of a BOM object This is described in detail in the section
142. be entering as a subassembly When working with an assembly the user can edit the automatically created internal BOM objects and to add to the assembly both internal and external BOM objects Automatically created internal BOM items cannot be deleted Any BOM objects are created to be moved to the BOM document later The transfer of objects created in models into the respective BOM documents is done as follows When creating associative views in drawings which are based on parts the BOM objects generated in the parts are passed to those drawings When creating associative views in drawings which are based on assemblies the 221 KOMPAS 3D V9 User manual internal BOM objects generated in the assemblies are passed to those drawings When connecting a BOM document to a drawing its existing BOM objects can be passed to the document Additionally you can connect a BOM document to an assembly document In this case internal BOM items created in the assembly are automatically propagated to the BOM documents It is useful to use the BOM Create BOM items for model command while working with assemblies The command allows auto creating in parts and sub assemblies of current assembly BOM items according to data entered on setting up properties of parts and sub assemblies Moreover BOM document can be automatically created and attached to the assembly by this command Components of style A BOM style is a union of paramet
143. bilities the KOMPAS 3D text module was not designed to compete with dedicated text processors and publishing systems It has its own application area producing technical text and graphics documents and provides best results in this specific area The text processor offers v User interface customizable for performing a specific task v Simultaneous processing of several text documents v Selecting an appropriate layout style for the document being created from the system library v Creating custom document layout styles and saving them in a separate user s library v Creating a document in an arbitrary format v Entering text using any available Windows fonts whether the vector graphics or TrueT y e v Control over font parameters v Applying library styles when entering and editing text v Creating custom text styles and saving those in the system library v AutoText capability for entering frequently used text fragments text templates v Creating a user s library common use text fragments v Automatic input of special notations and symbols geometrical tolerances dimension tolerances weld joint symbols etc from the system library v Creating a user s library of special notations and symbols v Entering formulas ratios subscripts and superscripts v Setting desired Paragraph parameters v Setting tabulation parameters v Centering text in columns 244 KOMPAS 3D V9 User manual v Aligning columns o
144. button or call the command again You cannot hide constraints or degrees of freedom for an individual object Note that this the Constraints and Degrees of Freedom display setting affect only the current window You can enable or disable the symbols displayed in other windows including another window of the current document independently from the current window Display of constraints and degrees of freedom in drawings and fragments by default is disabled while in sketches enabled Note In drawings degrees of freedom are shown only for the objects that have constraints whereas in fragments and sketches degrees of freedom are shown for all objects You can select the color of icons and toggle on or off the permanent display of variables frames of fixed dimensions and symbols of fixed points in the Displaying Constraints and Degrees of Freedom settings dialog Activating and setting up parametric mode properties You can enable the parametric mode either for all opened or newly created documents or individually for any particular document To enable the parametric mode as the Default for all newly created graphics doccuments complete the following 1 Call the command Service Options New Documents Graphic Document Adding Constraints 2 Activate the appropriate options in the constraint adding settings dialog 3 Click the OK button to exit the dialog and save the settings made that will from now on work for
145. button to preview Ei 3 Arrange the documents within the printable area and set the desired number of copies i J 4 To add documents to the printing set click the Add Document button on the Control bar In the displayed dialog select the appropriate file name or several file names 1A 5 To skip printing some documents or some pages of a multipage document select them and click the button Delete Document from Preview Click the Print button on the Control bar to start printing documents on paper 253 KOMPAS 3D V9 User manual Setting up print filters Sometimes a document needs to be printed so that some layout objects or graphical objects are not printed The document objects to print are managed in the dialog accessed by the command Service Print Filters In this dialog you can enable or disable printing various objects Specifics of outputting documents to vector devices There are certain specifics of printing documents on vector devices for example plotters Documents that will be output to a vector graphics device should be based on special layouts using the vector fonts These layouts are stored in the system library Vector lyt Documents are assigned layouts within the KOMPAS 3D V8 system Such graphical objects as TrueType fonts solid color fills and bitmap images may not output correctly to a vector device Therefore a warning will be displayed when attempting to print a
146. cally Those can later be edited v A bidirectional associative relation is maintained between a BOM and its respective documents Due to this relation any changes in an assembly drawing detailing or model document automatically reflected ina BOM Changes in a BOM can be automatically passed into an assembly drawing detailing or model v Ifa BOM and its related assembly drawing or model document are opened simultaneously then it is possible to set a working mode in which upon selecting a BOM line its respective objects are highlighted geometry elements or parts By placing the windows of a BOM and the related document next to each other you can quickly find the image of each object inserted into the BOM on the drawing v ABOMcan be created independent from an assembly drawing for example concurrently with drawing an assembly A BOM built in this way can be synchronized with the ready assembly drawing at the last working stage v If several people work simultaneously with different sheets of an assembly drawing then each of them can create in one s document the list of objects to be entered into a BOM Geometrical objects a leader a name a designation a number and comment etc can be specified for each BOM item When attaching such prepared assembly drawing sheet existing objects will be automatically tranferred into BOM reference numbers zones ect will be recalculated Therefore several people can work simultaneously on buildin
147. can print not the whole document but a portion thereof an area limited by a rectangle of an arbitrary size TO do this activate the switch Select Part on the Property Bar The upcoming dialog displays the current document and the marquee frame limiting the printable area By default the frame dimensions match the image extents To modify the frame dimensions enter the desired values in the fields of the Offset group in the left part of the dialog You can also move the sides or corners of the frame using the mouse When done with the settings close the dialog After that only the specified portion of the document will appear in the output area instead of the entire document a You can also control printing options of the current document by the switches in the Output Method group on the Property Bar Activating the switch Output Document Partially results in displaying in the output pane a portion of the document limited by the marquee while activating the switch Output Document in Full Size displays the entire document A document portion can be moved in the output area or scaled just like the whole document Suppressing printing of specified pages lf a document or several documents do not fit in the format that can be output by the connected printer or plotter KOMPAS 3D will automatically place the image on additional formats pages You can specify what pages to print and what not To suppress some
148. case a dialog is displayed with the attribute value when shown it will not be editable Deleting an object attribute If an object attribute is no longer needed you can quickly delete it from that the object To delete an attribute complete the following 1 Select the desired object 2 Call the command Service Attributes The attribute management dialog will appear 3 Select the name of the attribute to delete in the list of attributes possessed by the object and then click the Delete button Copying attributes between objects lf you need to assign an attribute to a drawing object coincident with an attribute possessed by another object then you do not have to create it anew rather copy the analog To copy attributes between objects in KOMPAS 3D a special clipboard is used different from the standard Windows clipboard The copied attribute value can later be edited To copy attributes between objects do the following 1 Select an object that possesses the attribute intended for copying 2 Call the command Service Attributes The attribute management dialog will appear 4 Select an attribute name from the list which you want to copy and click the Copy to Clipboard button If instead you click the Move to Clipboard button then the attributes will be copied to the clipboard and then deleted from the source object 5 Close the attribute management dialog by clicking the Exit button 6 Select the object to
149. ced in the face properties After setting the desired properties click the Create Object button on the Advanced Control Panel A face will be redrawn according to the new settings You can change surface properties not only for an individual face but for all faces of a geometry producing feature simultaneously To do this select a feature in the Model Tree and call the context menu command Feature Properties or select any feature face or edge in the Part window and call the context menu command Properties of Original Feature The Property Bar will display controls similar to those of face properties settings After setting the desired feature properties click the Create Object button on the Advanced Control Panel All faces of the feature will be redrawn according to the new settings in this case the individual face settings will be disregarded those will be replaced by the feature settings that are common for all faces If you need to assign the part color to an auxiliary element a coordinate system origin a projection plane or a sketch call the command for setting up object properties and enable the Use Part Color option on the Property bar When working with an assembly you can change properties of its objects auxiliary and projection planes geometry producing assembly cut features etc in the dialogs for 127 KOMPAS 3D V9 User manual setting up the respective object properties Working with those dialogs is none
150. cified portion of a document positioning and printing several documents at once setting up the order of outputting pages The model image is printed in its current orientation and in the current appearance shaded wireframe hidden lines removed or in gray and according to the enabled or disabled perspective Simply speaking the model image is printed in the way you see it on the screen at the time of calling the print command When printing text documents and BOMs it is also possible to set up the range of pages to print The system automatically splits the printable image into several pages in the case when the output device has a smaller size of the printable area than the document size Separate sheets can then be glued together in order to get a final document of a large size The Preview mode Once the document is created go into the print preview mode to make a hard copy This is a special working mode of the KOMPAS 3D system in which it can view the realistic appearance of the document positioned the document in the printable area select only a portion to output change the output scale and so on The documents are inaccessible for editing in the preview mode a To set this mode call the command File Print Preview or click the respective button on the Standard toolbar In the case if several documents are loaded in the course of work a dialog for selecting documents to print will be displayed You can select one or
151. cking the OK button and then click the Save button of the file saving dialog The selected document will be recorded into a file in the eDrawing DXF or DWG format There is no Parameters button when exporting to other formats For some of them the settings dialog appears after clicking the Save button For the rest of them export cannot be customized Export of a Parts List is also possible into the xls and dbf formats The respective command exists in an application KOMPAS library Writing to bitmap formats Besides data exchange with other systems via vector formats it is possible to write any KOMPAS document into a bitmap file Such files may be needed for example for publishing documentation The following bitmap formats are supported BMP TIFF GIF JPEG PNG TGA To write a document into a bitmap file call the command File Save As In the appearing dialog select the desired bitmap format specify the file name and then click the Save button After that a dialog will be displayed in which you can set up various output parameters scale number of colors dots per unit area etc 263
152. click the Filters button on the Compact Bar Yeoman Filters bar Y gt By default the Filter All button is pushed on this bar This button being pushed means highlightable and selectable can be picked with the cursor are all vertices edges faces axes and planes Ld J a ka M to perform your intended action you need to specify select objects of a certain type only push the respective button on the Filters bar Filter vertices Filter edges Filter faces Filter planes Filter construction axes Once any of those buttons is pushed the Filter All button becomes released You can select any combination of types of the available for selecting highlighting objects by having several buttons simultaneously pushed on the Filters bar If all buttons corresponding to object types are switched off then the Filter All button activates automatically in other words you cannot switch off the selection of all types of objects You can switch the buttons on the Filters bar at any time while working with the model Selecting objects in the Model Tree To specify or select an object in the Tree click the mouse on its name or icon In this way you can pick or specify an assembly component eight mate a sketch and auxiliary or geometry producing feature for example a revolved boss feature or a hole or a chamfer Note Picking and specifying objects in the Tree can be done only in the three dimensional construct
153. cluding into a macro element are located on different layers a dialog will appear querying for further actions To maintain a multi layer macro element select the Multy Layer option To create the macro element in the current layer select the To Current Layer option To create the macro element click the OK button To give up the creation click the Cancel button Selecting a macro element Macro elements can be subjected to various actions just like individual objects copying to the Clipboard deleting moving rotating etc Before performing an operation you need to select a macro element To do this just grab any of the objects belonging to that macro element by the cursor s catcher To select all macro elements in the current drawing view or in the fragment at once call the command Select By Type Select macro elements in the dialog that appears on the screen To close the dialog click the OK button Exploding a macro element To delete or edit objects belonging to a macro element you first need to explode it into individual objects After that you can proceed with their editing After exploding a macro element no relation is maintained between the objects that used to belong to it To explode a macro element complete the following steps 1 Select one or several macro elements to explode see also the topic Selecting objects by the mouse 2 Call the command Edit Explode To give up exploding a macro element
154. command Service Settings of Current View 3 The Property Bar will display controls for altering view parameters Make the necessary changes 4 Tf finalize the view parameters changes click the button Create Object on the Advanced Control Panel After changing the scale of the view containing extension lines and dimension leaders the inquiry about the scaling of extension lines will appear on the screen To have the length of extension lines measured according to the defined scaling factor answer Yes If you do not want to have the length of extension lines change answer No In case the view scale is altered greatly for example from 2 to 0 5 and the number of dimensions in it is vast it is recommended to confirm the scaling of extension lines The system view settings cannot be edited Creating New View 1 To create a new View in a drawing complete the following steps 2 Call the command Insert View The Property Bar will display controls for setting up new view parameters 3 Enter the ID of the new view if you want to change the one suggested by the system By default its scale rotation angle and name Entering a name is optional but its presence greatly enhances the search for a required view when working with a document 4 Select the current view display color from the Color drop down list 5 The coordinate system symbol will be displayed on the screen Place it with the cursor on the point which will become
155. confirm the changes click the Create Object button on the Advanced Control Panel To give up changes click the Interrupt Command button Editing splines and polylines When editing a spline or polyline you can change the values of quantitative and qualitative parameters which were defining that spline or polyline at creation but you cannot change the element type a spline cannot be converted to a polyline and vice versa After calling the spline polyline editing command the Property Bar displays the same controls as those used when creating the object The vertices of the curve and their ID numbers will be highlighted in the Model window If a vertex coordinates were input in the table by typing on the keyboard you can edit them manually To activate an entry in the table double click it to navigate between the cells in a row use the keys lt Ctrl gt lt Right arrow gt and lt Ctrl gt lt Left arrow gt If a vertex of a spline or polyline was specified by picking an existing point in the model then you cannot edit its coordinates manually To relocate such a vertex you would have to change the position of its reference point by editing the model Regardless of what was the method of defining a vertex of a curve you can change its position by picking any point existing in the model To do this select the table row corresponding to the vertex being edited The ID number of the vertex will be highlighted in the Model w
156. ct differ between the drawing and the BOM then the text portion or advanced parameters are copied from the BOM object from within the drawing model into the respective object in the BOM If some object existing in a BOM is missing in a drawing model then after the synchronization this object does not disappear from a BOM Due to this objects can be passed into a BOM from several connected drawings and models those objects will not destroy but rather augment each other Additionally a BOM will remember which document each object came from If in the future the objects will be passed from a BOM into the attached documents then each of them will be sent to its home drawing or model The BOM to which the changes are passed may not be loaded at the time of the synchronization in that case it will be opened changed saved and closed in the blind 231 KOMPAS 3D V9 User manual mode without being displayed on the screen BOM was modified If passing data from a drawing model into a BOM is temporarily disabled by the user the option Relation between an Assembly or Drawing and a BOM is disabled in the BOM setup whose action is described in detail in the section General BOM settings then synchronization is run neither by the user command nor automatically i After completing the command the system will display the message about what Transferring objects from a BOM into a drawing Sometimes you may need to pass
157. cted to the system by the Detach All command from the context menu of the list of libraries in the Library Manager window The command Service Detach All Libraries allows to detach at once all application libraries connected to the KOMPAS 3D system An individual application library running in the dialog mode can be detached by clicking the Detach button in its dialog An individual application library working in the panel mode can be detached by calling the Close command from the context menu of the library structure window or from the current section viewing window on the pane of the Library Manager Window Tip You can enable Auto Detach Libraries Attached in the Hidden Mode To do this use the library settings dialog 259 KOMPAS 3D V9 User manual Using OLE technology The OLE technology Object Linking and Embedding is one of the most powerful Windows tools providing joint functioning of various applications and data exchange between them Using OLE the user can insert objects into a document authored by one of Windows applications which originated in other applications For example one can insert a drawing of fragment developed in KOMPAS 3D system into a Microsoft Word text document In the future the inserted object document can be edited the editing being done by the object s native application commands for instance editing a drawing or fragment inserted in MS Word would invoke KOMPAS 3D Only entire KOMPA
158. cts belonging to the active layer are displayed on the screen with one color set for the current layer in its dialog for setting the parameters Active layers can be compared to tracing paper which is not being modified but only the previously drawn elements are corrected and the tracing papers are moved on the conventional drawing board In this case if creating the objects of the layer is complete and it is needed only as a stand for the placement of images of other layers it can be declared background The elements on the background layers of a view are accessible only for the operations of snapping to points or elements These layers cannot be moved and their contents are not accessible for editing All elements of a view s background layers are displayed on the screen in the same style that can be customized Background layers are similar to tracing paper fixed to base on it the new elements of a drawing or scheme Active and background layers behave in the described way if the are visible If the contents of a certain layer must not be displayed on the screen it should be declared hidden invisible Elements of such layers will not be displayed on the screen and will 146 KOMPAS 3D V9 User manual become completely inaccessible for any operations Comparatively speaking you can remove the currently unnecessary tracing papers from a conventional drawing board Switching between layers lf several layers are created in the ed
159. cument Manager dialog A background view layer is accessible only for the operations of snapping to points or objects Such a view layer cannot be moved and its objects are not accessible for editing The contents of all elements of background views layers are displayed on the screen in the same style that can be customized The Visibility property manages the display of a view layer and also has two states visible and hidden If the view layer is visible then it is displayed on the screen In this case the active views layers are shown in the colors selected for them while the background ones using the specified style If a view layer is hidden then it is not displayed on the screen regardless of whether it is active or background Therefore a hidden view layer is completely inaccessible for any operations Among all drawing views there is one and only one that has the current status Among all view or fragment layers there is one and only one that has the current status Exactly into the current layer of the current view the newly created objects are stored Any view layer can be made current In this case it automatically becomes visible and active As long as a view layer is current these values cannot be modified that is the current view layer cannot be hidden or set as background Once the current status is assigned to another view layer the state of the view layer that used to be
160. d and then later pasted from the clipboard then that attribute will be saved as a proprietary attribute of the object Compound objects in KOMPAS Graphic Using named groups When working with a drawing you can join separate graphical elements which are logically related to each other for their searching and editing convenience For example if you are developing a container with a cap then it would be convenient to select and move the cap and all design elements located on it simultaneously in the case when the container height is changed KOMPAS 3D offers flexible tools for working with such unions or groups of objects Including an object into a group does not set any limitations on its use The object can still be edited individually up to its complete deletion Any drawing object can be included in several different groups created in a document Upon creating each group you must necessarily enter its name In the future it will be displayed in the list for selecting when performing various operations with groups A group can be exploded at any time which will in no way affect the member objects Creating a new group To create a new named group do the following 1 Select all objects which shall be included in the group see also the topic Selecting objects by the mouse 173 KOMPAS 3D V9 User manual 2 Call the command Service Groups The dialog for creating and editing named groups will appear 3
161. d by the BOM for example selecting a different drawing format or model material then when saving that document a prompt will be displayed to confirm transferring data into a BOM You can refuse the data transfer After changing an object name or designation code the new data can be passed into the connected document To enable the transfer select the desired document name in the list and enable the option Send Changes to Document If after that you change data in the object s columns and save the BOM then the changes will be passed to the selected document documents In this case no additional prompt will be displayed for confirming the transfer of changes you just get the message that the document was changed Additional columns A BOM object may contain data beyond the information that is included into standard form Such data is stored in the so called additional columns of a BOM object those can be viewed or edited at any time however they are not shown in the BOM form and are not printed An example of information in the additional columns is an item s mass or price You can enter in the additional columns any information about an object a standard code material text comment etc their number and contents depend on the user s needs To view and edit data in the additional columns of a BOM object select that object A bar to work with additional columns appears on the Options tab of the Property Bar The pane con
162. del documents Each object of a three dimensional model in KOMPAS 3D has a set of parameters Each parameter correspond to certain variable The name of the variable is composed in accordance to the vN template where N is the number of the variable in the list of model s variables The following compose multitude of part s variables v main section variables are variables created by user and or automatically created by system when entering equations v variables of object parameters automatically created variables which correspond to object parameters v Sketch variables created by user they correspond to dimensions in the sketch Assembly variables also include external variables of its components By assigning values to variables user can modify corresponding object parameters 202 KOMPAS 3D V9 User manual without direct editing You can assign value to a variable by the following methods v directly enter the number which is value of the variable v enter the expression to calculate the value of variable v link to variable from external file i e assigning value of another variable All of operations with variables are performed in the window for managing variables Using parametric capabilities of KOMPAS 3D The graphic drafting editor includes functions of creating and editing parametric graphical objects The user can make up one s mind what type of drawing is more convenient to work with
163. deleted from the old locations and put in new places Copying objects by the mouse You can copy in drawing or fragment objects by the mouse avoiding menu commands To copy items by mouse complete the following steps 1 Select the objects to copy 2 Position the cursor so that its catcher was grabbing any of selected elements press the lt Ctrl gt key then press the left mouse button then release the lt Ctrl gt key Drag objects to the desired position the mouse button can be released after a slight object movement The ghost of the moved objects is displayed 155 KOMPAS 3D V9 User manual Once the desired objects placement is reached click the left mouse button Objects will be copied to the specified location while the originals will stay in the old place You can keep copying to more locations clicking the left mouse button to affix a subsequent copy To stop copying press the lt Esc gt key Simple deletion of graphical objects You can delete unnecessary drawing or fragment objects avoiding calling menu commands To delete objects complete the following 1 Select the objects to delete 2 Press the lt Delete gt key Selected objects will be immediately deleted from the document If you made the mistake and accidentally deleted required objects click the Undo button on the Standard toolbar or either the lt Alt gt lt BackSpace gt or lt Ctrl gt lt Z gt keys combination The deleted object
164. deleting attribute types An attribute type description created by the user can later be edited To edit an attribute type do the following 1 Call the command Service Style Libraries Attribute Types The Type Libraries Management dialog will appear 2 If a type that needs to be edited is stored in an external library connect link that library 3 In the list of the document or library types find the desired attribute type and click the Edit button To delete an unnecessary object attribute select it in the list and click the Delete button When performing various operations with attribute types pay your attention to an important circumstance When you are assigning an attribute to an object then you select a certain attribute type in which its structure is described In KOMPAS 3D an attribute type description is stored separate from the object attribute itself therefore the same type can be shared by multiple object attributes When editing or deleting a type description a problem instantly occurs about an inconsistency between the data structure and the data itself within the attributes To avoid possible failures and document integrity violations there are the following safety measures when working with attribute types When editing parameters of an attribute type that do not affect the data structure the type name titles and comments to the table columns lists of allowed values in cells no special precautions are
165. dentifies the geometry in a drawing pertaining to the selected BOM item provided that the drawing is open As you move through the BOM for example using the arrow keys the images of the respective objects are highlighted in the other window This mode is extremely convenient when working with density populated assembly drawings containing dozens of items A BOM can be set up so that when deleting its object the respective geometry was deleted from the assembly drawing for example as a Gasket object is deleted from a BOM the image of the gasket also disappears in a drawing Note that this BOM capability should be used with an extreme care since restoring a mistakenly deleted geometry is not always possible If you do not want or do not have time to meticulously select all up to the last geometric entity depicting a BOM object specify as the BOM object geometry only the position reference number leader pointing to the object image In this case when selecting a BOM item object its respective position will be highlighted in an assembly drawing Therefore including a position reference number leader into the contents of BOM object geometry helps searching it in a graphics document Including a position reference number leader into the graphics contents of a BOM item object helps another function of the associative relations between a BOM and an assembly drawing specifically the match between a position reference number on a d
166. derivatives You cannot undo deletion of an object in a model document Therefore use the deletion command very carefully Deleting individual array instances Sometimes you may need to exclude specific instances from a pattern To make such a change to a pattern select the instances to be deleted in the Model Tree To exclude an instance of a part elements pattern you can select any of its faces in the Part window Press the lt Delete gt key A dialog will appear in which you need to specify whether to delete all pattern instances the Whole Pattern option or the selected instances the Instances option Choose the Instances option The list of the pattern instances to delete becomes active in the dialog In the case of a 2D linear pattern a pattern instance ID is made of two numbers the first one is the number of instances by the first axis of the pattern the second one the instance number by the second axis instance numbers start from 1 In the case of a circular pattern a pattern instance ID is made of two numbers the first one is an instance s ID number along the radial direction the second the instance s ID along the circumferential direction instances are enumerated starting from 1 If instances are in a path pattern then an instance s ID is counted in the order the instances follow starting from the source one Click the OK button in the dialog The pattern will be rebuilt and displayed in the Part win
167. different from working with the dialogs for setting up the part object properties Besides that when working with assemblies you can set up colors of its components parts and subassemblies This is convenient in order to get a more clear representation of the model for example you can select the same color for all fastener parts used in an assembly and so on To set a component color select it in the Model Tree and call the context menu command Component Properties The Property Bar will display controls similar to those of face properties settings Set the color of the selected component and then click the Create Object button on the Advanced Control Panel The model will be redrawn Object Visibility Controls The auxiliary construction axes planes especially when there are many of them in the model sketches that are not used by any operations components of the assembly or a subassembly sometimes obstruct the model view For the convenience of working with the model you can make any of those objects invisible while it will still be accounted for in the hierarchy and its dependent objects will be correctly displayed To hide an object or several objects select them in the Model Tree some objects for example axes can also be selected in the model window and call the context menu command Hide The objects will become invisible Their respective icons will stay in their places in the Model Tree but will be displayed in
168. display is disabled then the sign by the o Ea ae macro element icon is missing You cannot view the contents of such macro element in the Model Tree The macro element display mode in the Tree in no way affects the display of its member objects in the Model window By default the contents display of a newly created macro element is On To disable the display of a macro element s contents select it in the Model Tree and call the context menu command Hide contents To restore the contents display call the Show contents command from the macro element context menu If several macro elements are selected with different display settings then both commands are available in the context menu 104 KOMPAS 3D V9 User manual Changing macro element contents Once a macro element is created you can change its contents by dragging objects by the mouse in the Model Tree Note The content of macro element can be modified if the the design sequence of a three dimensional model in the way of a structured list tree is enabled in the Model Tree v Thus to add an object to a macro element drag the object icon over the macro element icon When the cursor shape changes drop the object It will be added to the contents of the selected macro object If an object was located above the macro element in the Model Tree the macro element position will not change after adding that object Otherwise the macro element moves to the l
169. document containing the listed objects It lists the documents in which the following was found TrueType fonts bitmap images and fills also object types for example dimensions macro elements etc containing TrueType fonts bitmaps and fills You can disallow the output of bitmap images and fills or specify whether or not to print such documents by clicking the respective button of the dialog When confirming the output of the documents listed in the dialog remember that the enlisted objects are not guaranteed to be printed correctly Closing document print preview at To finish working in the print preview mode click the Close Preview button on the Control bar or call the respective command from the menu File The system returns to the normal document editing mode Printing Text Documents and BOMs When printing text documents and BOMs additional settings are available when comared to documents of other types 5 To call the setup dialog click the Print button on the Standard toolbar in the Imode of editing a text document or BOM In the displayed dialog the reference information is output regarding the type of the installed by default in the printer and the current text document parameters To replace the current printer by another one click the Device button A system dialog of printer settings will appear in which you can select any printer from the available output devices and to set paper orientation and its loading
170. dow without the specified instances Note Only an entire instance can be excluded from a pattern You cannot exclude individual copies of source objects from the contents of an instance 112 KOMPAS 3D V9 User manual Restoring deleted array instances If you need to restore all or individual instances excluded from a pattern complete the following steps In the Model Tree select the pattern whose deleted instances need to be restored and call the context menu command Edit Feature The Property Bar will display controls for setting up the pattern parameters Activate the Deleted tab This tab holds the list of the deleted elements ay In the list select the elements to restore and click the Restore button The ghosts of the restored instances will appear in the Model window and their IDs disappear from the list of deleted instances on the Property bar To confirm restoring array instances click the Create Object button on the Advanced Control Panel g e cancel restoring the deleted instances use the Interrupt Command button Changing the set of source objects After calling a command of editing a linear or circular pattern you can change the set of source objects components or elements in the pattern To add other objects to the set of source objects select them in the Model Tree To exclude elements from the source set de highlight them in the Model Tree These changes reflect on the ghost of the objects pattern
171. drawing and helps access the attached documents Additional columns of a BOM item object invisible on the BOM blank form may contain any necessary data about the object for which there is no room in the BOM blank form Setting up a BOM item object To do the setup of a BOM object select that object The Options tab of the Property Bar will display controls for setting up object parameters The fields Subsection Name and Subsection Number are used to move an object into another subsection within the section to which it belongs Those field values are interrelated when selecting a subsection name the pane displays the number of that subsection and ice versa after selecting a number you can see the name of the respective subsection Note Neither the name nor the numbers of the subsections are displayed in the BOM table neither are they printed If the current section does not have subsections then the list of subsection names Due to changes in a subsection an object position in this section may change will be empty You cannot move an object into another section If an object was mistakenly entered into some section then the only way to correct that is to delete the object and enter it again into the desired section The switch Ref No of Object Increases shows whether the position reference linumber of the current object should be by one greater than the reference number of its preceding object 214 KOMPAS 3D
172. drawn cutout m Select the profile side where the fixed side of the face will be Select the method of defining dimple or drawn cutout height Full or Outside Enter the height in the Height field Note When using the Full method the specified value of the dimple or drawn cutout height must be greater than the thickness of the sheet body salen ee DO Specify the direction of adding side wall material Inward or Outward with respect to the surface swept by the profile moved in the creation direction To incline side walls of a dimple or drawn cutout enter the inclination angle value in the Angle field Rules of inclining side walls of a dimple or drawn cutout Example The zero value in the Angle field means having no inclination To round side edges enable the Edge Fillet option and enter the rounding radius Depending on the state of the Side switch a drawn cutout can have either a bottom or a base To round bottom edges or base edges enable the Fillet option and enter the rounding radius Note If a dimple or drawn cutout is created with rounding bottom or base edges then it is impossible to simultaneously satisfy the specified angle radius and height values in the cases of small relative to radii heights of that dimple or drawn cutout Since the height and the radius have a higher priority the value entered in the Angle field will be ignored The slope angle of side walls is calculated by the syste
173. driver 6 Close the dialog by clicking the OK button From now on printing will be done according to the parameters set in the dialog Scale of Printable Area By default the printable area is displayed to such scale as to fully fit on the screen The current scale of displaying the output area is indicated in the same name field on the Control bar If there are many documents or the selected document contains several pages then the output pane display scale becomes too small This causes inconvenience when positioning documents You can increase the display scale of the printable area so as to make page borders and the printed image well visible on the screen Lito do this call the Zoom In command or press the lt gt key on the Number pad of the keyboard The current scale will be increased in 1 2 times You can also zoom in on any region of the printable area To do this call the Zoom In Aby Marquee command After that click the mouse at the first corner location of the zoom area Then move the cursor to get the desired marquee size The ghost marquee box will be rubberbanding on the screen After fixing the other corner of the box the image will be magnified so as to fit to the entire window the portion of the output area within the box Additionally you can define an arbitrary display scale To do this enter the desired value in the Current Zoom field on the Control bar and press the lt Enter gt key E i decrease
174. duction SM_BD v Neutral Layer Factor SM_K Note If the length of the bend flat pattern is determined by the table then the flat pattern parameter is not used 5 You can create sheet variables in a part SM_Thickness SM_ Radius SM_Angle etc and assign them the desired values even before creating the sheet body The defined values become the default for the given part and used when creating this sheet body and sheet features Methods of defining flat pattern length of a sheet part bend KOMPAS 3D provides three methods of defining the length of a bend flat pattern v Defining Position Factor of the neutral layer v Defining the bend amount v Defining Bend Reduction Besides it is possible to use bend tables that is accessing the parameter defining a flat pattern length bend amount bend reduction or the neutral layer factor from a table The default method of defining a flat pattern length is set in the sheet body properties dialog for new parts For each specific part the default method of defining a flat pattern length can be changed in the sheet body properties dialog for the current part Besides that it is possible to choose the method of defining the flat pattern length for each particular bend 52 KOMPAS 3D V9 User manual Defining the length of the bend flat pattern by the neutral layer factor Flat pattern length is determined on the assumption that there is a neutral layer in a bend Neutral
175. e lt Esc gt key Special objects of piping features When working with the KOMPAS 3D three dimensional solid modeling system you can think of a pipe a pipeline as an assembly composed of elongated elements and harnessing for example pipes cables and fittings pumps electrical connections etc Pipe elements are located along the specified path and are connected together To add an element to a pipe you need to accomplish the following tasks v Define the pipe path v Relate pipe element locations and the path v Establish connection of elements to each other and or to pipes To accomplish these tasks special objects are a used control and attachment points Such points shall be added to pipe elements before building the pipe The following commands serve to create them Jr KOMPAS 3D V9 User manual Ficontro point ggiiAttachment Point Control Point command Serves to create control points in a model ga call the command click the button Control Point on the Construction Geometry toolbar or pick it by the name from the Operations menu Specify a model anchor point which will be the control point The vertex name will be displayed in the field Point The control point is displayed as a ghost You can define the control point name and color on the Properties tab of the Property bar If another vertex is picked by the cursor a ghost of the control point will appear in this vertex The contents of the P
176. e Document Manager dialog is modal To continue working in KOMPAS system this dialog should be closed To finish the sheet format settings and continue working click the OK button To close the dialog without changing the settings click the Cancel button Tip The first drawing sheet properties can be set up by another method Call the command Service Options or the Settings of Current Drawing command from the document window context menu Open up the Current Drawing tab of the displayed dialog and perform the desired settings using the interface items of the First Page Parameters section Switching between views All sheets of a multipage drawing are displayed on the screen simultaneously However a display scale can be set such that some of the sheets will end up outside the screen To select a drawing sheet to be displayed on the screen use the interface items on the Pages management bar cai Di The buttons Go to previous page and Go to next page serve to display the _ sheets so positioned relative to the current one i in The buttons Go to previous page and Go to next page serve to display the first _i _ land last document sheets respectively Eh To display a document sheet with a particular number select the number from the Show page combo box Deleting a sheet xc To delete a sheet activate the Sheets item in the Tree of Sheets Views and 139 KOMPAS 3D V9 User manual Layers of the Document Manager
177. e able to use these images in operations they shall be exploded There are additional specific requirements to sketches that serve for particular operations Creating New Sketch A new sketch is created in the following order 1 Select a plane or a flat face on which the sketch will be positioned To select a plane click the mouse on its name in the Model Tree The plane s icon in the Model Tree will be highlighted green and the plane notation a square with defining points will be highlighted in the Part window To select a flat face click it with the mouse in the model window The face will be highlighted green 2 Call the sketch creation command To do this call the Sketch command from the context menu or from the Operations menu or click the Sketch button on the Current Status bar An icon of new sketch will be displayed in the Model Tree it will be noted as locked and Sketch button will stay pressed This signifies that the system is in the sketching mode Sketch plane orientation The sketch plane contains its coordinate system and the helper ghost in the case when the sketch is constructed on a flat face or on an auxiliary plane By default the ghost is shown in black dots By default the parametric mode is on in a new sketch Setting parametric mode in the sketch 3 Draw the sketch image Using commands to create geometry objects create the sketch of the geometry producing feature or a path to sweep a sec
178. e above described cases KOMPAS 3D allows creating and using macro elements The objects belonging to a macro element are not independent Those cannot be individually selected deleted or edited except for style changes Thus a macro element is processed by the system as a single entity A macro element cannot unite objects located on different drawing views To gain an access to individual objects belonging to a macro element you need to explode it first In this case no relation is maintained between the objects that used to belong to the macro element An example of using macro elements is KOMPAS application libraries Drawings of mechanical structural elements elements of electrical and air or hydro lines created by means of those libraries are macro elements which helps significantly soeed up and simplify working with drawings M F A library macro element example 175 KOMPAS 3D V9 User manual Creating a new macro element To join several different objects into a macro element complete the following 1 Select all objects which are to be included in a macro element see also the topic Selecting objects by the mouse The objects must belong to the same drawing view 2 Call the command Service Group into Macro Element If you attempt to include objects from different views into a macro element the system will output a message about an unsupported operation 3 In the case the objects selected for in
179. e bend parameters to be the same as those of the source object In this case modifying parameters when editing the source object causes rebuilding of the bend it will accommodate to the new parameters By default right after creating a sheet feature all its bends have the By source item option turned On To define individual bend parameters enable the option By source item After that other interface items become accessible on the tab so that you can set up the bend The edited bend will maintain the defined parameters regardless of changes in the source object settings Note You can neither alter the method of defining the radius nor change its value when editing bends of a sheet body with an open sketch corresponding to arcs in the sketch of the sheet body The bends with disabled parameter definition by the source object are displayed in the Variables window as standalone elements dependent on their source object Those bend parameters are the radius and the flat pattern parameter Bend amount or Reduce bend or Neutral Layer Factor If the length of the flat pattern is determined by the table then the flat pattern parameter is not used Note If a bend belongs to a sheet body with an open sketch and corresponds to an arc in the sketch of the sheet body then the Radius parameter of that bend does not show in the variables window If the flat pattern length of such bend is set by the table then the bend does not appear in the variable
180. e command the model will be rebiuld excepting the excluded objects and their dependent operations and objects The icons of the objects excluded from calculations will be displayed light blue and additionally marked with a cross in the Model Tree Note 1 Since the objects excluded from calculations are temporarily deleted from the 128 KOMPAS 3D V9 User manual model then the objects that were based on them are sometimes marked as failing Errors disappeared after including objects into calculations Note 2 When excluding from calculations assembly components the objects are excluded from among BOM items that correspond to those components To reenable the inclusion of one or several objects into calculation select them in the Model Tree and call the context menu command Include into Calculation Excluding objects from calculations helps save calculation time when building additional elements or rebuilding the model as well as to see how the model looked like before creating certain elements For example after creating a sequence of dependent elements you need to proceed to creating other elements that are not related and do not intersect with the existing ones You can exclude the existing sequence from calculations after which the model rebuilding time will significantly shorten when creating new elements the system will not run checks for intersection on all elements and calculate the intersection lines When the requir
181. e components are added from storage others are built on spot then the assembly designing process is called mixed Additionally KOMPAS 3D allows inserting several identical components into an assembly without calling the dedicated command Adding a component from file Creating Component In Place Adding a standard item to an assembly Inserting identical components into an assembly Adding a component from file a To add a component to an assembly a part or subassembly existing in a file on disk call the command Operations Add component from file or click the Add from file on the Edit Assembly toolbar After calling the command the standard file selection dialog will appear There select the desired folder and specify the name of the file containing the component The selected component image will appear in the dialog s preview pane If the component file is selected correctly click the Open button Specify the component s insertion point The insertion point can be specified in the Assembly window arbitrarily or using a snap for example at a coordinate system or at a 88 KOMPAS 3D V9 User manual vertex You can also input the X Y Z coordinates of the insertion point in the fields of the Property bar The component will be inserted in the current document its coordinate system origin will snap to the specified insertion point with the coordinate axis directions aligned with the coordinate axes of the curr
182. e drawing but are merely copied into a BOM together with all their additional parameters and data about the geometry connected to them A BOM object can be edited both in the BOM document and in a drawing in the slave mode After a BOM object is edited in one of the attached documents a BOM or a drawing the changes can be passed to another document synchronize 219 KOMPAS 3D V9 User manual lf an assembly drawing consists of several sheets that is from several KOMPAS 3D documents then in each of them you can create BOM objects and then pass them into the BOM connected to all sheets pages The objects from all connected drawings will be put in a BOM in the order prescribed by the standard each will be put in the section in which it was created in a drawing and all objects will be sorted Since passing BOM objects from a drawing into a BOM requires calling just one command and takes little time usually a few seconds it can be used to quickly restore a lost or damaged BOM If you will create objects from the beginning in a separate BOM document and will not pass them into the drawing later then restoring in this way will be impossible Yet another advantage of creating BOM objects in a drawing is the possibility for the object to receive data directly from the drawing If you create in a drawing a BOM object that contains among its geometry a position reference leader then a drawing zone designation symbol will automa
183. e face The base face of a louver can be only an outer or inner flat face of a sheet body or sheet feature Louver sketch requirements Eas To call the command click the Louver button on the Features of Sheet Body toolbar or pick it by the name from the menu Operations Features of Sheet Body The Louver command is available if at least one sketch is selected The sheet feature ghost display is enabled by default and such ghost is displayed in the Model window with current parameters ay To specify the side of the base face to place a louver activate the desired switch in the Direction radio group The forward construction direction is the outward direction from the base face the reversed one is inward The current direction of creation is indicated on the screen by a ghost arrow Bb Select the louver position right or left off the sketch by activating the desired switch in the Orientation group A AI Ast Select the method of defining the louver height and enter the height value Select louver creation type from the Method list Two methods are available Drawn and Trim When using the Trim method you can select the end face shape in the training direction or normal by the thickness 72 KOMPAS 3D V9 User manual Enter the louver width in the Width field The width value W must satisfy the following condition 2 S lt W where S is the sheet material thickness For a drawn louver th
184. e is being imported the information that will be stored in it Storing data in a table attribute Data in each attribute table cell can be represented as integer or real numbers a string of text or a record A record is a string of another table to which this table column refers that contains the given cell For example if a column has the title Pump Properties and contains cells with records then when viewing some of the records in this column the row of the nested table is displayed on the screen It may keep the pump mass its power and the overall dimensions Only one nesting level is allowed for a record that is you cannot create a record within a record If no value range is specified for integer numbers then the default assignment is 0 65535 The greatest range for integer numbers can be 2147483648 2147483647 lf no value range is specified for real numbers then the assignment By default is 3 4e 3 7 3 4e 38 O 3 4e 38 3 4e 37 The greatest range for real numbers can 167 KOMPAS 3D V9 User manual be 1 7e 307 2 2e 308 0 2 2e 308 1 7e 307 The length limitation can be imposed on a string of text Filling in the attribute columns containing integer or real numbers or text strings can be a ranged using the values from the approved list only For example if a table column contains the values of a milling machining station feed rates then when filling it from the list of all
185. e main system work simultaneously You can dynamically switch from main system commands to library functions and back In the Panel mode the library structure appears on a separate tab in the Library Manager window You can change the size of any section in a tab The panel mode provides the advantage of a capability of showing slides corresponding to library commands Just like in the window mode the library and the main system work simultaneously Changing the library working mode When adding a library to the Manager you can set the desired mode by selecting the respective option in the properties dialog of the library being added When the library is already added to the Manager its working mode can be changed by the commands Menu Dialog Window and Bar from the library name s context menu You can change the working modes of either a connected or an unconnected library At the same time it doesn t matter what is the currently used library mode The mode change is also possible while working with the library except when working in the menu mode Note The working mode change is only possible for application libraries The Model Libraries 13d and Fragment Libraries lfr have only one mode the bar Working with several libraries simultaneously KOMPAS 3D allows connecting and using to work with documents up to 25 application libraries of the same time Remember however that each library connection consumes free system resource
186. e mouse on the title block table The cells of the title block will become editable Note Editing certain cells for example Developed By Verified By Signed Dated etc is prohibited These entries were defined at creation of tables that are part of a layout style When filling in the title block you can use all capabilities of the KOMPAS 3D text editor Some cells such as Letter or Scale also support a user defined menu There is also a provision for automatic insertion of the number and name from the special dialog Once done with filling the title block table call the context menu command Create Object or press the lt Ctrl gt lt Enter gt keys 187 KOMPAS 3D V9 User manual Revision Table The Revision Table is a special table for inputting information about document revisions which is not a part of the drawing s title block table It is created and filled by the rules that are defined in the revision table style To set up the style of the revision table and to work with it the BOM design system is used therefore in order to work with the revision table you need a license to work with a BOM The layouts of the two types shipped as part of the revision tables system with zones and without zones and their filling rules the table contents numbering and revision change marks etc satisfy the standard requirements GOST 2 104 68 To create a revision table in the title block of the drawing for example in tha
187. e one or several standard fragments select their names in the list and click the button Delete Local fragments and the fragments taken from files are deleted from the main document physically that is their contents is destroyed In the case of external fragments only the links to them are deleted while the external fragment files themselves stay unchanged on the disk Be especially careful when deleting local and embedded into document standard fragments since upon the deletion all instances of the insertions will be deleted as well this will happen when saving the main document on disk If fragments were deleted by a mistake immediately use the Undo command to return to the previous state of the document Fragment Library General information When working with KOMPAS 3D you can save created drawings of standard parts into fragments and then insert them in new drawings If in an operating time often there is a necessity to insert into drawings the same fragments it is convenient to use Libraries of fragments It is possible to store various standard fragments in libraries with any remarks to them Usage of libraries of fragments simplifies search and an insert in the document of ready maps Each fragment library is a separate file with the Ifr extension The library fragments are not separate files on disk rather they are part of a single library file Fragments are stored in the way of ordered lists in subsections and in the root
188. e page As objects are sorted they may be moved Therefore the same BOM object in the same drawing can have one position reference number while in another a different one Additionally due to differences in the scale and position of views it may happen that in different drawings the extension lines corresponding to the same BOM object will be located in different zones Since a three dimensional model is related with its associative views the BOM objects will be passed into the model document with different text portions in this example with different position reference numbers and zone numbers which may cause conflicts and instability in the system operation To avoid the situations like the one described the following mechanism is used in the KOMPAS 3D system Among all BOM columns including the additional ones you can select the columns that will be a regarded as belonging to the model These are the only columns available to fill in when creating a BOM object in model documents To specify the columns that should belong to the model activate the Use in Model option in the column description dialog when setting up the BOM style Therefore the partially filled rather than completely filled BOM objects will be generated in parts and assemblies and propagate to other documents For example in a simple BOM the model use is reserved by default for five columns Formattting Designation Name Quantity and Mass
189. e parameters is called setting up a BOM To call the BOM settings dialog use the command Format BOM Properties If this command is called from the slave mode of editing BOM objects then the applied settings affect the BOM connected to the current document and the slave mode itself If no BOM document is connected to the current drawing or model then the BOM Properties command is unavailable After calling the command the BOM Settings dialog will appear Displayed in its upper portion is the name of the current BOM style The options on the Settings tab allow modifying General BOM settings make them different from the settings provided by a BOM style In the Sections tab you can make certain settings of each particular section of the current BOM different from the default prescribed by the style The settings made become in effect right after exiting the BOM settings dialog by clicking the OK button Other BOM settings and parameters can be modified for example put objects of the current BOM on another form only by means of changing the BOM style by another style that contains the desired settings in parameters for example the required BOM form This is described in the Changing Existing BOM Style section If the BOM style with the desired parameters and settings such as a user BOM form does not exist yet then it can be created manually This is described in the Changing Existing BOM Style section The techniques of mod
190. e width should also satisfy the condition W lt L 2 where L is the length of a line in the louver sketch To round louver base edges enable the Edge Round option and enter the rounding radius in the Radius field The values of the height width radii as well as the direction and Louver position can be set using defining points To save current parameters of a louver for use throughout the session enable the option Default All changes are immediately reflected on the ghost of the louver in the Part Window To confirm the Louver creation click the Create Object button on the Advanced Control Panel lt i A louver will be created in the part and the respective icon in the Model Tree Beat command Serves to create in a sheet part a beat using one of the three shapes of the section Round U type Note In fact a beat creation is not a bending operation rather it is a deforming operation where the sheet material is stretched and its thickness reduced When performing the Beat the command this change in the material thickness is disregarded A beat sketch is a curve defining its configuration and position The face containing the beat sketch is considered the base face The base face of a beat can be only an outer or inner flat face of a sheet body or sheet feature Beat sketch requirements Note A beat cannot be created if its sketch has common points with edges adjoining to bends al To call the command click
191. ear in the drawing window as the view outline rectangle The Property Bar will display controls for setting up parameters of the views being created After setting up parameters of a new projection view specify its anchor point position A new view will be inserted in the current drawing and an icon of the created view and its name will appear in the drawing s Design Tree E View icon in the Design Tree View in Arrow Direction 4 To create a view by arrow in the current drawing call the command Insert _ amp Model View View in Arrow Direction or click the View in Arrow Direction button on the Associated Views toolbar In the drawing area select the arrow indicating the viewing direction The ghost of the image will be displayed in the form of an outline box The Property Bar will display controls for setting up parameters of the views being created After setting up parameters specify the view position on the sheet A new view will be inserted in the current drawing and an icon of the created view and its name will appear in the drawing s Design Tree ity View icon in the Design Tree Detail View TH To create a separate isolated portion of the model surface detail view in the Icurrent drawing call the command Insert Auxiliary View Detail Viewor click the Detail View button on the Associated Views toolbar In the drawing area select a closed contour limiting the detail view The contents of the view outside
192. eate Object button on the ___ Advanced Control Panel to have the feature created The created extrusion will appear in the Part window and the respective icon in the Model Tree if Extrusion icon a Extruded boss icon Revolution Feature T To create a part base in the way of an extrusion feature call the command Operations Feature Extrude or click the Extrude button on the Edit Part toolbar The Revolve command is available if one sketch is selected After calling the command the Property bar displays the controls to define operation parameters v onthe Options tab the construction method the direction and angle of rotation v onthe Thin Wall tab the parameters of a thin wall revolved feature v onthe Operation Result tab the construction result new body or a boss feature 46 KOMPAS 3D V9 User manual All parameter values once entered or modified immediately reflect on the ghost of the revolved feature displayed on the screen After defining all extrusion parameters click the Create Object button on the Advanced Control Panel to have the feature created The created revolved feature will appear in the Part window and the respective icon in the Model Tree Ay Extrusion icon 9 Revolved boss icon Swept Feature To create a part base in the way of an extrusion feature call the command Operations Feature Extrude or click the Extrude button on the Edit Part toolbar
193. eated in the document without physically inserting its contained objects Therefore when editing a source fragment all inserts made from that source will be updated This insertion method is ideal in the cases when the image of a part or mechanism contained in the fragment is simultaneously used in several different documents and modifications to the fragment should automatically propagate into those main documents when opened Therefore there is no need to edit each document when a shared part or mechanism is modified at Inserting a fragment into a document To paste the contents of an external fragment into the document complete the following 1 Call the Fragment command from the Insert menu 177 KOMPAS 3D V9 User manual 2 In the displayed dialog specify the file name of the fragment to insert 3 After that the ghost of the inserted objects will appear on the screen and the insertion parameters interface items show up on the Property bar select a Method of Insertion exploded embed in the document or by an external link as well as the method of placing the inserted objects on the layers You can set the scale and rotation angle of the insert in the respective fields of the Property bar 4 Specify the anchor insertion point location A fragment can be subsequently inserted into several places in a document while defining individual rotation angle and scale for each of the inserts Ger 5 To finish insert
194. echanisms similar in the shape and different only in their parameters dimensions When working with KOMPAS 3D you can save created drawings and models into files and then insert them in new documents However it is not always convenient since you have to edit the object any time you insert a fragment or model to get the desired dimensions To simplify and speed up development of drawings and assemblies that include typical and standard items fasteners springs bushings threaded holes grooves elements of wiring diagrams civil engineering structures etc it is very convenient to use ready made parametric libraries A library is an application created to extend standard KOMPAS 3D capabilities and running in its environment Typical examples of applications are the KOMPAS RTW library shipped together with the system it contains the commands for creating drawings of frequently used geometrical shapes smooth and threaded holes etc along with such KOMPAS family products as the library of standard engineering elements and the Fasteners Library which considerably speed up development of assembly models and preparation of assembly drawings An application library can be created in any of standards programming environments running under Windows Borland C Microsoft Visual C Borland Pascal etc using functionalities of a specially designed KOMPAS MASTER software development Architecture wise a library is a standard dynamically
195. ecify the first rectangle s vertex position 6 Move the cursor and watch the values in the Height and Width fields on the Property Bar You will see values in these fields displayed with decimal digits to the precision specified at the time of the Number scheme setup l Click the Rounding button 8 Make sure the Height and Width fields now display integer values multiple of 5 that is the rectangle dimensions change in increments with the step equal to the cursor step 9 Change the cursor step from 5 to 2 10 Make sure the rectangle s dimensions became a multiple of 2 24 KOMPAS 3D V9 User manual For viewing convenience you can enable display of commands parameters next to the cursor To do this call the command Service Options System Graphic Editor Cursor In the right part of the appearing dialog set the option Display Command Parameters and then click the OK button Now the current values of the current rectangle height and width are displayed not only in Property Bar fields but also the next to the cursor This helps control correctness of construction Note that the rounding approximation mode is temporarily suspended when a snap activates For example if the end point of a line segment being constructed is specified by some kind of a snap say Nearest point then the line length will not be rounded It will be exactly equal to the distance from the start point to the point of the snap Additio
196. ect button on the ___ Advanced Control Panel fay The icon of the attachment point will appear in the Design Tree The Attachment Point H command stays active The system waits for the next attachment point input 98 KOMPAS 3D V9 User manual Ger To finish an input session of attachment points click the Interrupt Command button or the lt Esc gt key 3D Lines and points Creating 3D lines and points To create 3D lines spirals splines or polylines and points use the commands from the group Operations 3D Lines The respective command buttons are located on the 3D Lines toolbar M Point E Cylindrical Spiral Conical Spiral Spline by Vertices Polyline by Vertices Points and 3D lines can be used in operations to create various objects For example points can be used as reference objects to construct polylines lines curves can be used as guides when constructing sweeps patterns etc Spiral To create a spiral call the commands from the group Operations 3D Lines The respective command buttons are located on the 3D Lines toolbar E Cylindrical Spiral Conical Spiral The spiral creation commands are available if there is a selected flat object in the Model window This would be an auxiliary or projection plane a flat face of the part After calling the command the Property bar will display the controls which will serve to define parameters of the spiral and to enter its geometrical d
197. ects for new elements They will be created automatically i e without any confirmation from you Crer To cancel editing click the Interrupt Command button on the Advanced Control Panel 60 KOMPAS 3D V9 User manual Bend command Serves to create a bend along an edge of a sheet part face The edge must be straight and belong to an outer or inner flat face of the sheet part The selected edge will be accepted as the bend line while the face the base face of the bend To call the command click the Bend button on the Features of Sheet Body toolbar or pick it by the name from the Operations menu Select the bend line The sheet feature ghost display is enabled by default and such ghost is displayed in the Model window with current parameters Define the bend parameters using control items on the Property Bar v Select the direction of counting the angle v Choose a bend placement on the edge from the drop down list Depending on your choice the fields appear in the Property Bar for entering the bend width and or its offsets from the edge ends v Enter the bend width in the Width field By default this field contains the value equal to one third of the bend line length v Enter the values of the bend offsets in the fields Offset 1 and or Offset 2 v Choose the option of defining the bend extension length from the Method of defining length group and enter the length in the Length field You can enable the I
198. ed elements are created include the rest of elements into the calculations Their relative position check will be run just once You can exclude from calculations chamfers fillets holes and other small elements if due to their large cumulative number new geometry producing feature creation is to slow By using the command Exclude from Calculation you can selectively exclude objects from calculation that is regardless of what position they occupy in the model elements hierarchy and therefore in the Model Tree There is also a possibility to simultaneously exclude from calculations several model elements that are located at the end of the Model Tree To do this use End of Model Design marker the rollback bar You can move it in the Model Tree In this way all elements whose icons in the Tree become below the End of Model Design marker are excluded from calculations To include those elements into calculations you need to move the Marker so that the icons of the elements become located above it Remember to include in calculations all model elements when finishing a model development Service functions Measurements and MP calculation While working with a model you may need to find a distance or an angle between the vertices edges axes faces and planes KOMPAS 3D supports measurements of various geometrical characteristics as well as calculation of mass inertia properties of a model volume mass center of gravity coordin
199. ed at the moment Naturally it would be illogical to deprive the user of such capabilities when migrating to computer aided design and development based on KOMPAS 3D That is why the system is provided with the ability to use layers for effective design of complex drawings with high information density assembly drawings comprising a large number of parts and nodes engineering drawings and schemes plans wiring diagrams etc KOMPAS 3D provides the capability to use in your work up to 2 147 483 647 layers which is more than enough for working with a drawing of almost any density and complexity A layer can be in one of the following states v Active or background v Visible or hidden One of the layers is current A current layer is always only one In it you can perform any operations of creating editing and deleting elements All newly created objects are entered into this current layer Elements of the current layer are displayed in the real styles of lines points and hatches which are set in the system settings dialogs In this meaning the image of the current layer coincides with the image of the view or fragment in which only one layer is present You can say that the current layer is the tracing paper which is located on top of all others and on which the engineer is currently drawing on Several layers can be active simultaneously Elements of such layers are accessible to the editing and deletion operations All obje
200. ed to be current will return to its previous status Modifying a view state To change view status complete the following steps 1 Call the command Insert States of Views or click the States of Views button on the Current Status bar The Document Manager dialog will be displayed 2 Select the root element in the Tree of Sheets Views and Layers the current drawing The List of Sheets Views and Layers will display all views existing in the drawing and their properties 3 In the List select the view whose state needs to be modified 4 Set the view properties using the buttons on the Document Manager Toolbar FX Make current Tlactive 3 Backgrou nd Visible Hidden The values of view properties can also be modified by clicking the icons in the fields of the List of Sheets Views and Layers 5 Close the Document Manager by clicking the OK button To modify the view status you can also use v States of Views field on the Current Status bar v the commands Current Background Hide from the view context menu in the Design Tree of the drawing Note Remember that you cannot change properties of the current view Changing View Parameters You can alter some parameters of the view name scale point of origin of the view coordinate system etc To make those changes complete the following steps 1 Set as current the view whose parameters need to be edited 142 KOMPAS 3D V9 User manual 2 Call the
201. ee You can add model objects to it To group several existing object in a macro element select them in the Model Tree and call the command Group into Macro Element from the context menu or from the Service menu A macro element containing the specified object will appear in the position of the bottommost object included in that macro element The icons of the member objects will be placed at the level following the macro element level The objects placement order in a macro element is the same as their placement in the Tree before creating the macro element Note A macro element can group only such objects that belong to the same parent object and are located on the same level except Sketches within a loft feature Bends within a sheet feature for example bends making up an incision Pattern instances Therefore you cannot group into a macro element the objects that belong to different assembly components to a macro element and to the overall model to an assembly component and to the overall assembly etc Managing macro element contents display There are two modes of displaying a macro element in the Model Tree Together with the contents Without contents 4 oF If the contents display is enabled then the sign is H Fi Meco ement displayed by the macro element icon in the Tree Clicking the mouse on this sign turning it to expands the list of member objects of the macro element E Wacroelement 2 Ifthe contents
202. een Note that the directions of shifting the same view can be only parallel or perpendicular to each other For example a break was created in a view which shift direction at 30 degrees to X axis Later you can create breaks at the same angle or at 120 degrees angle to X axis a The Delete button serves to delete the current break from the view The Show breaks option on the Property Bar calls the display of breaks in a view To confirm a broken view creation or changes to its parameters click the Create Object button on the Advanced Control bar The break will be created All geometrical objects of the current view that were inside the break boundaries will not be displayed on the screen The visible portions of the image will be limited by the break lines and moved towards each other so the distance between them becomes equal to the value defined in the Gap field Specifics of Broken View command The following commands will become available in the context menu of the broken view in the Design Tree to manage the broken view Broken View Options and Show Broken Views Setting up model objects display in associative views Once an associative view is created you can specify what model objects are to be displayed in this view To do this go into the view parameters setup Activate the Objects tab on the Property Bar It already has three options Solids Surfaces Cosmetic threads Activate the options corresponding to the objects that need
203. eet into a drawing v Using the Main Menu Call the command Insert Sheet A new sheet will appear on the drawing to the right of the existing sheets Its layout and format will be determined by the settings made for new drawing sheets If necessary those properties can be modified v By using Document Manager For this do the following 1 Call the Document manager 2 Select the Sheets object in the Tree of Sheets Views and Layers 3 GE Click the button Create Sheet on the Document Manager toolbar A line will be added at the end of the List of Sheets Views and Layers which corresponds to the created sheet If necessary you can change the sheet properties 4 Click the OK button on the Document Manager It will be closed and the added sheet will appear on the screen at the right of the existing sheets Sheet Numbering By default drawing sheets are numbered automatically The sheet number is entered in the title block of each sheet and the total number of sheets is entered in the title block of the first sheet When deleting or hiding sheets their numbers and the total are recalculated The respective information updates in the title blocks Please note that you cannot manually edit this information If automatic sheet numbering is not required you can disable it To do this call the command Service Options Current Window Document Parameters Sheet Numbering In the upcoming page numbering dialog you can v
204. efine the text style used in the cell by default prohibit or allow changing cell text define text offsets from the cell borders and the rules of adjusting cell dimensions You can transform the table by adding or deleting columns and rows splitting or merging cells changing cell size and border lines To change the table structure and layout use controls on the Table tab of the Property Bar on the Tables and Borders toolbar or the Table menu commands To learn more about the purpose of mentioned elements and commands use the Interactive Help 247 KOMPAS 3D V9 User manual system To modify column or row size place the mouse cursor at the border of the column or row press and hold the left mouse button and drag the border in the desired direction Once done with building the table click the mouse anywhere on the document outside the table Later when you need to edit the inserted table double click it Inserting images Normally various technical descriptions operating manuals and other design and processing textual documents include a large number of figures drawings diagrams etc The text processor allows producing fully furnished documentation it supports inserting in a text documents the drawings or fragments developed in the KOMPAS 3D drafting design editor In this way you simultaneously reduce both the labor load and time for preparing the product technical documentation by creating a suite of electronic
205. el To quit editing without changes to the curve click the Interrupt Command button 115 KOMPAS 3D V9 User manual Extruded Feature When editing an extrusion whether a boss or a cut feature you can change the values of quantitative and qualitative parameters which were defining that element at creation but you cannot change the element type and the type of the Boolean operation determined by the choice of the command to create that element For example an extrusion feature cannot be converted to a revolved feature a cut feature cannot be converted to a boss After calling the command the Property Bar displays the same controls as those used when creating this object v You can change the direction and the extrusion depth angle and direction of the draft on the Options tab When editing a boss or a cut feature you can change the method of defining the extrusion depth For example instead of a fixed distance select the Through All type v You can also edit the thin wall parameters also enable or disable its creation on the Thin Wall tab v On the Operation Result tab you can modify the operation result and or its applicability range Parameter changes are promptly propagated into the Part window in the way of a ghost feature with updated parameters a er To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command button Revolution Feature
206. el or making and operations with a sketch or several sketches In this case the following types of operations are available 1 Revolving a sketch about an axis lying in the sketch plane Sketch and feature produced by the revolved operation 2 Extruding a sketch in the direction perpendicular to the sketch plane Sketch and feature produced by the extrusion operation 3 Sweep operation sweeping a sketch along a specified guide Sketches and feature produced by the sweep operation Generally speaking the extrusion and revolved operations are the special cases of the sweep operation Obviously when extruding the trajectory of sweeping the sketched section is a straight line segment and when revolving a circular arc or a full circle 39 KOMPAS 3D V9 User manual 4 Creating a body by several sketched sections loft Sketches and feature produced by the loft operation Each operation has additional options for varying the rules of creating a body Normally after creating the first operation in a part volumes are added to the resulting body or deleted from it Each of them is a feature produced by the operations with sketches listed above When selecting an operation type you need to specify in advance whether the created future will be subtracted from the main volume or added to it Examples of subtracting volumes from a part are various holes slots grooves while examples of adding volumes are protru
207. elete standard orientation names those starting with the character To close the orientation selection dialog click the Exit button You can set up model display properties when changing an orientation change the 33 KOMPAS 3D V9 User manual array of the reorientation transition or disable optimization in the Display Settings dialog Display Model The following model display modes are available in KOMPAS 3D Wireframe Hidden Lines Removed Hidden Lines in Gray Shaded Dimmed Wireframe B Si a Sito select a display type call the command View Display and select the desired option You can also use buttons on the View toolbar Note Whatever display type is selected it does not affect model properties For example when selecting the wireframe model display the model remains solid filled with material it does not turn into a set of wire edges merely its surface and material are not displayed Wireframe A wireframe is the combination of all edges and the model silhouette lines XS SN NN To display a model as a wireframe call the command View Display Wireframe or click the Wireframe button on the View toolbar Displaying a model as a Wireframe 34 KOMPAS 3D V9 User manual Hidden Lines Removal A model display with hidden lines removal results in displaying a set of visible in the current model orientation edges visible portions of edges and the model silhouette lines ina To
208. ements can be either original or dependent The same element can be a dependent derivative and parent Source at the same time but for different elements For example a hole is a derivative dependent element of its own sketch and a source parent element for a chamfer created on that hole s edge An element is always dependent on one or several elements that are above it in the Model Tree and can be a parent to one or several elements which are below it in the Model Tree However this rule does not uniquely define relations between particular elements and an element position in the Tree does not let you judge whether it is a parent or a dependent with respect to a given element To view all the relations involving a particular element select it in the Model Tree or any its part for example a feature face in the Part window From the context menu call the command Relations in additional window Additional window of Model tree will be displayed containing hierarchy information of the selected object 200 KOMPAS 3D V9 User manual The first line of the window shows the name of the element whose relations are considered The two sections subordinating to shown element display elements belonging to the described element s hierarchy as structured lists Sections in these lists can be expanded and collapsed by clicking the mouse on the and signs next to their names To view long lists you can use scroll bars The
209. en creating or editing objects Styles can be created and edited without interruptions to object creation Any style change is immediately reflected on the document display Styles can be created and stored either directly within a document or in sytem external files using a special format style libraries Style variations and their storage KOMPAS 3D supports style assignment for three groups of drafted objects Lines curves Hatches Pixels Additionally you can use text styles when entering individual labels on drawings and when creating drafted graphical documents KOMPAS 3D ships with ready made system styles of points lines and hatches Those are embedded directly in the executable code The styles created by the user in the course of work can be stored in different locations If a style was created within a document then it will be stored directly in that document file Additionally styles can be created and stored in a style library In the future when working with a document you could connect this library and select the desired style from it For convenience of working with a large number of styles stored in various libraries and documents you can create a so called container and copy into it all necessary styles from various locations Such container can be compared with an artist s palette where one keeps all currently needed colors The container s contents can be changed or appended with more styles at any moment A
210. ent assembly An appropriate for the component type icon will appear in the Model Tree a part or assembly ey Part icon Si Assembly icon If the added component is the first in the assembly it is automatically fixed in the position in which it was inserted A fixed component cannot be moved with respect to the assembly coordinate system You can unfix a component To do this select a component in the Model Tree and call the context menu command Unfix Note Component fixing can be enabled or disabled at the user s choice When creating an assembly we recommend you to fix one or several its components Creating Component In Place When building an assembly in KOMPAS 3D you can add ready made components from disk to it or create ones without leaving the current assembly file that is build parts and subassemblies in the assembly context In this case all the rest of the assembly components will be visible in the window Those will not be available for editing but their elements faces edges vertices sketches etc can be used in operations for creating new components To create a component within an assembly call the command from the group Operations Create Component The respective command buttons are located on the Edit Assembly toolbar Blcreate Assembly Gj Create Part Note The Create Part command is available only in the case when a flat object is selected in the current model auxiliary or projection plane or flat
211. ents Number of Solids N 1 Number of holes M 1 Density Ro 0 00782 gram mm3 Mass W 289 gram Volume V 3 69e 04 mm3 Center of Gravity Xc 117 mm Yc 182 mm Zc 5 mm Axial moments of inertia Jx 6 68e 04 gram mm2 Jy 2 45e 05 gram mm2 Jz 3 07e 05 gram mm2 Planar moments of inertia JxOy 2 41e 03 gram mm2 Jx0z 6 44e 04 gram mm2 Jy0z 2 43e 05 gram mm2 Centrifugal moments of inertia Jxy 1 07e 04 gram mm2 Jxz 0 gram mm2 Jyz 0 gram mm2 Editing the density reference file When running calculations you do not have the input the material density value manually but select it from a reference file This file is called graphic dns and is located in the subfolder sys in the main KOMPAS 3D folder The graphic dns file is saved in the Windows text format ANSI encoded and uses a simple syntax which helps easily edit and append it Sections in the file start and end with special symbols A section name must be on the same line as the opening brace There could be nested sections that is you can build a tree like structure Spaces are not significant characters and do not affect the strings display in the information dialog Follows below is a fragment of a graphic dns file which describes the Metals section containing two subsections Aluminium Alloys and Bronzes Metals 186 KOMPAS 3D V9 User manual Aluminium Alloys AD AD1 2 71 D1 2 80 Bronzes Br ArFe9 4 7 50 Br ArFeMn10 3 1
212. ents in the drawing s Design Tree The hidden lines tangent edges and bend lines displayed can be enabled on the Lines tab of the Property bar when editing a view Note however that when working with assemblies containing more than a 1000 parts it is not recommended to enable the transfer of hidden lines to a view this will cause a significant increase in the view creation and rebuilding time v Inthe dialog of title block settings disable the option Synchronize Mass This will help skip model mass calculation when generating associative views by which their creation and rebuilding will soeed up The Mass entry will stay empty in the drawing s title block To fill it you can use one of the two methods aa the title block filling mode on the Options tab of the Property bar activate the Mass Synchronization switch and click the button Synchronize The model mass will be calculated and passed to the title block After that turn off the Mass Synchronization switch and exit the mode of filling in the title block Open the model depicted in the drawing and call the Calculate Model Mass Properties command Copy the mass value from the info window and paste it in the respective entry of the title block 198 KOMPAS 3D V9 User manual Parametrical capabilities Variational parameterization of the sketch Sketches implement the variational concept of parameterization familiar to users from their experience with KOMPAS 3D draw
213. er they are simply not visible since there is no assigned place for them in the new BOM style If the BOM is assigned the old style the objects will become visible again Data will be passed to the columns of BOM objects according to the column type and the number of column within the given type For example the data that will go into the column DESIGNATION 1 of all BOM objects is that which was present in the column with the type DESIGNATION 1 before changing the style In this case it doesn t matter how these columns are called in the style what title they have in the BOM form and in what order they are positioned in the form For example in the previous BOM style the type POSITION 1 was assigned to the third column in the form while in the newly assigned style at the tyoe POSITION 1 belongs to the first column in the form Therefore the data that was previously in the third column now will be positioned in the first column If a newly assigned BOM style contains a column of a certain type and ID numbers of the type column which did not exist in the previous BOM style then the column will be empty right after the reformatting Later it will be possible to fill it in in a usual way when editing each object lf a newly assigned BOM style does not contain a column of a certain type and ID numbers of the type column which existed in the previous BOM style then the data from the column with this type will not be displayed in the n
214. ers included in a group is not displayed A To make the specified by you group element settings active focus on the group of properties and layers and click the button Make current A check will appear on the group icon After that click the button Apply In this case the Document Manager will stay on the screen If you click the OK button then the settings will be applied to the layers in the group and the Document Manager will close To close this dialog without applying the introduced settings click the Cancel button Assigning Groups of Filters Using filters allows creating dynamical groups of layers whose properties correspond to those defined for a given filter For example this could be a direction to show only those layers that are assigned the purple color or the layers whose names start with the letter s The contents of such group will change according to the changes in the properties of graphics document layers For example when creating a new layer whose properties satisfy the filtering conditions that layer will be automatically shown among the contents of the filter Filters can be turned into groups Filters are named objects By default when creating a filter at it is assigned a name consisting of the word Filter and a sequential number This name can be edited Filters are saved in the document Creating Filters To create a document layers filter select a place in the Tree and click the Create Filter bu
215. ers and settings inherent to the BOM and affecting its filling and appearance Components of a BOM style Parameters and settings of a BOM can be divided into five groups 1 BOM Template v sheet Size v Frames v The title block stamp of the first and the following BOM sheets created in a special way 2 Common settings v Presence or absence of a link between an assembly drawing and a BOM and the type of the link v Automatic calculation of reference numbers on or off v Zone calculation on or off v Geometry deletion when deleting the respective BOM object on or off v Position Start Number v Building bottom up on or off v Number of Variants v Saving entered text in a text template file on or off 3 Columns of the BOM form The number of columns corresponds to the number of columns in the BOM table which is part of the title block For each column of the form specify v name v Type v Number of Column of This Type v Value Type in Column 222 KOMPAS 3D V9 User manual v presence or absence of a link with title block entries of the drawings connected to the object v whether is used in the model v Whether it contains the section title Each column settings are the default for the entire BOM 4 Additional columns The list of additional columns is created by the user For each of them specify v name v Type v Number of Colu
216. ert an ordinary drawing or fragment into a parametric one you need to complete the following steps 1 Apply relations and constraints that can be created in the semi automatic mode Those include calling certain points horizontal vertical parallel and perpendicular 2 To do this use any convenient method to select the objects to which you need to apply constraints on 3 Switch to the Adding Constraints bar and click the Add Constraints button In the dialog that appears upon calling the command select the names of constraints and relations to apply to the selected objects and specify the tolerances for identical points and inclination angle deviations Click the OK button in the constraints type selection dialog after which the system will automatically apply the specified constraints to the selected objects Note If many objects are selected the command execution time may be quite long 4 To make dimensions hatches center marks surface finish symbols and datum symbols associated with geometrical objects you can edit any of those objects and select the reference lines anew Another way is to delete old nonparametric objects and create those anew while running the mode of creating associative layout objects this is especially recommended for hatches in the case of a complex configuration of the areas to hatch 5 If you need to create additional relations and constraints use the commands on the Adding Constraints bar
217. es and a BOM consists of BOM objects BOM objects in the BOM form table are interlaced with section titles empty lines and reserved lines 218 KOMPAS 3D V9 User manual By default the text portion of a BOM object occupies one line in the BOM form in this case a condensed character spacing is automatically set in each column in order to fit the entire text in one line in it If reading the text is difficult due to it being highly condensed the user can move a portion of it to the next line Therefore a BOM object may occupy multiple lines in the BOM form The main BOM objects are sorted automatically and by the Reference Numbers creation command each of them receives a position reference number corresponding to its position in a BOM this is not applicable to the objects in the section where the positions calculation is turned off The automatic sorting of objects can be toggled on or off in each particular section All the auxiliary objects and main objects of a section in which automatic sorting is off can be put in an arbitrary order You cannot move an object from one section to another Items of BOM in a drawing and model In a drawing and in a model that could be at the same BOM objects as in the BOM document the basic information about such objects is provided in the section BOM objects in a BOM By default those objects are displayed neither on the drawing sheet nor in the model window and are not printed
218. eseeees 182 Applying a drawing IAyOUL cc eccccccc cece cecece cece eeceeeeeeeeseeeseeeeseeeseeeseeeseueeseeeseeeseeeseeseees 187 ASSOCIALIVE MOCELClAWING vesdenicdviversenoeeinanevotostovortauluebaceaeessie yumeleneeiadidesnsersiquaniuabrerelawosias 189 Creating and editing associated VIOWS cccccccccececeeeeceececeeeecegeeseeeesseseeeeeeseesaeeaeeses 190 Recommendations on working with an associative drawing of a large assembly 198 KOMPAS 3D V9 User manual Parametical Cap Ail SS n a AN aN 199 Variational parameterization of the SK tCN cccccccececeeeceeeeeeeeeeeeceeceeteeseeeeeeeeeeenees 199 Using parametric capabilities of KOMPAS 3D 0 cccccceeeceseceeeeteeeeeeeeeseeeeeeeeeenes 203 KOMPAS 3D BOM General Information ccccccceccceeeeceeeeceeeeceeeeeeeeeseeesseeesaeeesseeetaees 211 DO Msicestinesemetotensseoyestevasiuestscantiabuerediadecastenidovedalendioosmtiaiionidsyiuauduces edeoreiadueesieasivanseueete 211 General information about KOMPAS 3D text Editor cecccseeeeeeeeceeeeeeeeseeeeeeeaes 244 EDUN LOG UMON S una a E natin 249 HDF Siac geet tetera E E EE 256 Generallibrary MOMA ION nessen A 256 WOKING WIED MOFANI CS screniseecscscasastascngncesandssetoussaemsassagesccobadaieccuisaatemssanesdadeacseaseapeacaxtaces 256 connecing LIDA Seamer eee testers mettre ee ee ar nore eta ee Roe 257 Selecting and starting a function from a library nnaannannnannnnnnnnnnennnn
219. esent fulfill following operations 1 Call from the shortcut menu of a tab the New fragment command 2 In the appeared dialogue enter a fragment name in library KOMPAS 3D will open a new window of a fragment 3 Create the image which will be stored in a fragment 4 Save and close the document 181 KOMPAS 3D V9 User manual The created fragment will be placed in current section of library Further to edit a library fragment select it in the list of fragments of library and call from the shortcut menu the command Edit For handle of library structure commands are Delete Copy Cut And insert the shortcut menu With their help you can transfer fragments and subsections between sections and also to delete become unnecessary sections and fragments Besides by means of commands of copying a cutting and an insert the exchange of sections and fragments between various libraries of fragments is possible Inserting library fragments To insert a fragment from library into the current graphics document or the thumbnail fulfil following operations g Click the Library manager button on the Standard toolbar The Library Manager window will appear 2 In a window of the Manager of libraries select in the list a fragment which is required to be inserted 3 Call the context menu command Paste fragment to document It is possible to double click also the mouse by name the necessary fragment The system enters the fr
220. essages Fixing a component When working with an assembly you can fix a component to disable its relocation relative to the assembly coordinates We recommend fixing up list on assembly component in order to have a predictable moving behavior of components when applying mates The first component inserted into a new assembly from a file is automatically fixed To fix other components in the current position complete the following steps 1 Select the component components in the Model Tree 2 From the context menu call the command Fix Fixed component icons are marked in the Model Tree with the letter f in parentheses Since the property of being fixed is one of assembly component properties you can use the following method to fix an individual component 1 Select the component in the Model Tree 2 From the context menu call the Component Properties command a Activate the Fix Component switch in the Fixation group on the Properties tab of the Property bar Click the Create Object button on the Advanced Control Panel To disable fixing select the desired component components and select the Unfix command in the context menu oy To unfix an individual component you can also use the Don t Fix Component switch lin the Fixation group on the Properties tab of the Property bar 92 KOMPAS 3D V9 User manual Creating mates Once components are created in an assembly you can proceed with creating
221. etc Due to this the presence of an error in the model is noticeable even if the Model Tree is fully collapsed To find out what s the reason for the occurred error select the object with the exclamation mark in the Model Tree and call the context menu command What s wrong A dialog will be displayed in which the errors are listed that occurred during this object rebuild Errors are displayed in the dialog as a structured list Description of each error is located at the level next to the name of the failing object If the error occurred in a sketch then the latter will be on the level next to the name of the element relying on the sketch When you are viewing all model errors then its failing components features construction axes and planes copies chamfers shells components mates etc appear in the list at the level next to the model name The help system contains recommendations on possible error fixing techniques To get explanation for the specific error and general recommendations on fixing it select the error description in the dialog and click the Help button Read the displayed page of the Help system think which all the described cases is most similar to the error in your model and remember recommendations on its fixing To fix an error edit a feature sketch or mate in which it occurred or the source elements according to the Help system recommendations Often to fix an error it is enough just to edit the
222. ets Views and Layers will display the newly created layer The text cursor will appear in the group name field You can change the default name Entering a name is not mandatory but understandable layer names especially if they are numerous vastly improve the work with the document For ease of use it is beneficial to add a commentary for a layer By default a new layer is assigned the first unused number If necessary you can change it 3 E i set the layer display color in the active state click the Color button on the toolbar of the Document Manager Layer color can also be selected from the drop down list of the Color column Ea Note that after creating a new layer the current layer still remains the same as _ before If you need the new layer to be current click the Make Current button or click the mouse on the Status cell On the layer icon a red check will appear indicating that the layer is current 4 After finishing entering all new layer parameters click the OK button of the Document Manager 148 KOMPAS 3D V9 User manual Deleting a layer You can delete a layer from the document For this do the following 1 FA Call the command Service Layer Status or click the button Layer States lon the Current Status bar The Document Manager dialog will be displayed 2 In the Tree of Sheets Views and Layers select an object document view group of properties or group of layers containing the layer to
223. ew style BOM Those will not be deleted from the object you will be able to see them when a column of the appropriate type will appear in the BOM style The same principle is used to transfer data to additional columns and the display information in them An example of reformatting a BOM is a change of a BOM style from Simple to Group and vice versa In those styles the sections with the same titles have the same numbers and the respective columns the same types Therefore when reformatting a BOM all sections are preserved along with the text portion of objects within them Generally speaking changing the style of a BOM containing objects is not a typical operation To make it produce a meaningful result not just to distorting an existing document it is necessary that when setting up user styles of sections and columns a possibility of reformatting was foreseen and the expected results of reformatting accounted for Creating a BOM If you need to create a BOM not related with an assembly drawing from the menu File call the New command In the appearing dialog select the BOM document type and click the OK button A new BOM table will appear on the screen This table and the rules for filling it columns sections existence of automatic sorting the number of reserved lines etc will correspond to the style that is set By default fora new BOM 226 KOMPAS 3D V9 User manual Later a BOM created in this way can
224. f a part are replaced with bounding boxes of appropriate dimensions and colors when the image is changing and when small scale is set Additional simplification available if the image is changing temporary hiding auxulary objects deselecting objects etc Once the redrawing or scaling has finished the diasplaying of model is restored The simplified mode works with all types of model display The simplified display settings are done on the System tab of the options dialog in the section Model Editor Simplifications This section contains two entries Model and Other Model item allows setting refinement level for models The smaller is the level of details the larger components or solids are turned into boxes and the faster are the changes to a model s displaying In the same entry you can specify whether to hide or simplify standard assembly components The Other entry allows using additional simplification tools while in the simplified display mode Moreover points can be displayed instead of those components or solids which have became hidden because of small scale Parts and assemblies are displayed simplified by default 132 KOMPAS 3D V9 User manual Call the View Simplifications Simplified display command or release the Simplified display button on the View toolbar to disable simplified displaying mode in model Recommendations on working with large assemblies As the complexity of assembly component
225. f numbers by the decimal point v Formatting text v Modifying text attributes weather for the current or for selected paragraphs v Automatic division of technical specifications into several pages or merging v Automatic numbering of lists of different nesting depth for example when entering technical specifications v Creating and editing arbitrary tables v Using all functions of a text processor when entering any annotations in the drawing field and various symbolic notations v Exchanging text and graphics information with design drafting editor of KOMPAS 3D system inserting drawings and fragments into a text document v Importing text in the RTF ANSI and ASCII formats v Outputting ready documents to a plotter or printer Creating Text Document Managing its display To create a new a text document call the command File New A dialog will be displayed in which you need to specify the document type To create a document based on a template switch to the Templates tab and select the desired one After selecting the document or template type click the OK button The new text document window will be displayed a blank area with a dotted rectangular frame the border of the text edit area The Property Bar and the Compact bar display control elements and buttons for calling text management commands oy pg vst like when working with a drawing you can use the Zoom In and Zoom Out buttons on the V
226. face Adding Standard Item lf standard items are used in the assembly as bolts nuts screws etc then you do not need to model them as individual parts Models of standard items from the Fasteners Library can be inserted to an assembly To connect Fasteners Library complete the following 1 Call the command Service Library Manager The Library Manager window will appear 2 On the KOMPAS Libraries tab click the mouse in the field next to the Fasteners Library label The library will be connected in its defined mode menu window dialog or panel To insert a standard item in an assembly expand the respective section of the library 89 KOMPAS 3D V9 User manual for example Screws and select the desired item type In the dialog displayed specify parameters of the inserted product click the OK button Specify the insertion point of the product in the assembly window do this approximately or use snapping or a cylindrical conical surface to which the inserted standard element should be bound Click the Create Object button on the Advanced Control Panel lf a standard component s anchor point was specified in the current assembly window then it will be inserted in the specified place lf a surface was selected in the assembly then upon creating a new standard item a mate will be added while the item will be positioned in such a way that the mate constraint holds The type of mate depends on the type of
227. failing model again reverting to the old model parameters If a part has several errors fix those in the order in which the failing elements appear in the Model Tree 125 KOMPAS 3D V9 User manual Some errors make it impossible to maintain elements continue construction and editing a part For example after editing a contour reference vertices for making construction axes and planes disappeared in the sketch and a derivative element cannot be rebuilt the model fell apart it cannot be further used before fixing the error Other errors are not so critical and do not prevent from working with the model further For example when translating a sketch to another face the parametric relations of the sketch graphical objects were lost In this case graphical objects are not rebuilt in the sketch the sketched contour stays the same and the element based on it is not destroyed thus allowing to maintain the dependent elements In any case it is recommended to fix an error right after its occurrence Warnings about required model rebuilding Normally a KOMPAS 3D assembly is parametric that is it has parametric relations and constraints If the relations and constraints present in the model are violated then inconsistencies occur in the model whose fixing requires the model to be rebuilt Normally parametric relations and constraints existing in an assembly become invalid during its editing For example two assembly componen
228. field on the Current Status bar Note For some parameters it is not possible to create defining points The values of such parameters can be modified only directly on the Property bar Creating a part model General technique A typical order of modeling a solid body is applying Boolean operations addition or union subtraction and intersection to three dimensional elements spheres prisms cylinders cones pyramids etc An example of performing such operations is shown on the figure Boolean operations with three dimensional elements a acylinder b union of a cylinder and a prism c subtraction of a prism d subtraction of a cylinder In KOMPAS 3D three dimensional shapes are produced by sweeping a planar entity in the space so that its trace defines the element shape for example revolving a circular arc about an axis produces a sphere or torus translating a polygon makes a prism etc 3 KOMPAS 3D V9 User manual Te en Jl MA Three dimensional elements generation D y T a a prism b a torus c a sweep A planar shape that serves for generating a body is called a sketch and a geometry producing sweeping of a sketch an operation A part may consist of multiple solids Those in turn can also be subjected to Boolean operations Sketches A sketch can be located on one of the orthogonal coordinate planes on a planar face of an existing body or on an auxiliary plane whose p
229. from the library appears on the Parameters tab of the Property Bar 80 KOMPAS 3D V9 User manual The ghost of the sketch selected in the library is displayed in the Part window Then the coordinates origin of the library fragment is aligned with the origin of the plane or face where the sketch is located You can change the sketch position on the plane translate or rotate it The Property Bar has fields for defining the position of the library sketch origin in the sketch plane coordinates t and the sketch rotation angle Angle You can fill in these fields with values by typing on the keyboard To define the fragment origin position by the mouse unfix the coordinate fields and select the desired point in the model window Selected point coordinates will be determined automatically and entered in the respective fields You can specify the fragment rotation angle in the same way After defining the desired sketch placement click the Create Object button on the Advanced Control Panel Graphic objects from the library fragment will be copied into the new sketch and the system will return to the Part mode A sketch inserted from a library loses references to its source Its further editing process is the same as the process of editing other sketches Multibody modeling Multibody modeling is the process of modeling a part when several solid bodies are created Multibody modeling may result either in one body or in multi
230. fte lt gt lt gt Zoom in or out the image in the current window relative to the cursor lt F1 gt Call KOMPAS 3D help system context help lt Alt gt lt F4 gt Exit KOMPAS 3D Entering and editing text in a table lt Tab gt Go to the next cell lt Shift gt lt Tab gt Go to the previous cell Special operations with entered or edited text lt Ctrl gt lt Enter gt Move the line to the new page only for text documents lt Shift gt lt Enter gt Start new line and do not use numbering Windows management lt Ctrl gt lt F6 gt lt Ctrl gt lt Tab gt Go to next window lt Ctrl gt lt Shift gt lt F6 gt lt Ctrl gt lt Shift gt lt Tab gt Go to previous window Managing display in the window lt Ctrl gt lt G gt Show or hide the grid in the active window lt Ctrl gt lt F9 gt Refresh the screen lt PageUp gt Scroll image one screen up lt PageDn gt Scroll image one screen down lt Home gt Scroll image to the top of the document lt End gt Scroll image to the bottom of the document lt Ctrl gt lt PageUp gt Scroll image one screen left lt Ctrl gt lt PageDn gt Scroll image one screen right lt Ctrl gt lt Home gt Scroll image to the left of the document lt Ctrl gt lt End gt Scroll image to the right of the document Managing cursor position and snapping The keys are used o
231. g a bomb that includes a large number of objects meanwhile combining their results into one whole can be quickly done at any moment v Ina BOM there are additional columns They serve to store additional information about a BOM object for example its mass or a standardized code You can view and edit their contents at any time but in the BOM blank form those are not shown neither they are printed out v The layouts templates of the BOM types shipped with the system and their filling rules form composition numbering of positions and sorting lines names of sections etc are governed by a standard the specific GOST code numbers are 211 KOMPAS 3D V9 User manual specified in the BOM style names v Itis possible to create a user BOM type Such a BOM is an arbitrary table with the user defined column titles section names filling rules and records sorting The creation techniques and the purpose of such tables are similar to the creation techniques and the purpose of a standard BOM It is convenient to use to create a BOM that will agree with industry or agency standards as well as various listings and schedules KOMPAS 3D BOM Item object A BOM item is a line or multiple sequential lines in a BOM Bill of Materials which are related with a single material object A BOM object is its main structural unit Just like a drawing consists of graphical entities and macro elements a text document consist of words and sen
232. g its dependent elements and their parameters All of this information is stored in the model and is not destroyed upon editing its separate parts Editing a sketch You can edit a graphical image in any model sketch After editing a sketch the feature based on it will be rebuilt according to the new contour configuration in the sketch You need to select a sketch before calling the sketch editing command This can be done in one of the following ways Select the sketch in the Model Tree 106 KOMPAS 3D V9 User manual Select a feature based on the sketch in the Model Tree Select any face of a feature based on the sketch Then call the context menu command Edit Sketch The system enters the sketching mode At the same time only those elements will be left in the part window that are located before the edited sketch in the Model Tree In other words the model will temporarily return to the state in which it was at the time of the edited sketch creation When making changes to a sketch you can project map on it the existing elements edges faces etc snap to edge ghosts if such are present in the sketch add and delete parametric relations and constraints perform any constructions edit graphical objects If the sketch is parametric and the object positions in it are defined by associative dimensions you can enter new values for those dimensions Remember that a sketch for performing an operation must satisfy certain re
233. g the corner treatment No Treatment Butt Juncture and Chord Juncture v Specify the gap amount v If you need to cap pared bends abuting on the angle sides activate the Continue capping option When done with corner capping settings click the Create Object button on the Advanced Control Panel The selected corners will be capped and the capped corners icon we will appear in tthe Model Tree By calling the Cap Corners command once you can select several corners for capping Their list is displayed on the Angles bar Note In some cases adjacent bends have such parameters or are positioned in such a way relative to each other that capping the corner becomes impossible Hole in Sheet Body command Serves to create round holes in a sheet part The command is available if a flat face is selected in the part To call the command click the Hole in sheet body button on the Features of Sisheet Body toolbar or pick it by the name from the menu Operations Features of Sheet Body The ghost hole will appear in the Part window together with an arrow indicating the material cutting direction Cannot Change Direction By default the hole center is positioned at the origin of the selected face s local coordinate system The position call at the desired place on the face enter the coordinates in the anchor point field on the Options tab of the Property Bar You can also select the hole position by the mouse To
234. hat the mirror copy operation and all the following ones were excluded from calculations Then only the original half of the part will be displayed which you can edit as desired After including the copy operation into the calculations the second half of the part will also include the introduced changes 111 KOMPAS 3D V9 User manual If all elements positioned in the Model Tree below the Marker are no longer required for creating the model you can simultaneously delete them To do this use the command Delete Elements below Rollback Bar the Marker from the context menu accessed on the Marker After calling the command a Warning dialog will appear It will be listing the deleted elements and the elements dependent on them You can cancel or confirm the deletion Deleting Object Any object a geometry producing feature or an auxiliary element a sketch assembly component etc can be deleted from the model to do this simply select it in the Model Tree and call the context menu command Delete or press the lt Delete gt key If other elements are based on an object being deleted for example a sketch is drawn on a plane being deleted which in turn serves as a base for creating a geometry producing feature then a warning dialog is displayed listing the elements affected by the deletion operation You can cancel or confirm the deletion In the case the deletion is confirmed not only the selected object is deleted but also its
235. have any difficulty using the Compact toolbar in KOMPAS 3D 6 X and higher versions Switch buttons Command buttons Toolbar Lompact Bar a Move markers Contents of the Compact Bar depend on the type of the active document Toolbars are activated using the switch buttons Note The toolbars within the Compact bar cannot be activated by menu You can change the composition of the Compact bar The move markers are located next to the switch buttons To extract a Toolbar from the Compact bar drag the respective marker by the mouse outside the Compact bar area Release the mouse button The selected Toolbar appears on the screen Its respective switch button disappears from the Compact bar Note that now this Toolbar can be activated only by the menu To bring back or add a Toolbar to the Compact bar press and hold the key lt Alt gt Then drag the header of the toolbar by the mouse to overlap it over the Compact bar As soon as the plus sign appears next to the cursor release the mouse button and the lt Alt gt key The toolbar will be included into the Compact bar KOMPAS 3D V9 User manual User compact bars Any Toolbars except for the Standards View Current Status and compact bars can be joined into a user compact bar To do this press and hold the lt Alt gt key Then drag one toolbar over another one of the header using the mouse As soon as the plus sign appears next to the cursor release the mouse but
236. he lt Ctrl gt key 5 The component will be inserted in the current assembly and an icon corresponding to the component type will appear in the Model Tree part or subassembly The inserted component will be oriented with respect to the assembly coordinate system in the same way as the first component To change its position use the translation and rotation commands as well as commands for applying mates When using this insertion method the selected components are added to the current assembly There is certain specifics about this method 1 If you want to insert an already existing subassembly into the assembly once more select that subassembly proper before performing the operation If instead of the subassembly its components are selected then those will be inserted in the current 90 KOMPAS 3D V9 User manual assembly as stand alone components that is the components from the subassembly will enter directly in the assembly containing that subassembly 2 If you need to insert several identical components into a subassembly go into its editing mode then the current object will be that subassembly To do this call the command Edit Edit Component When editing a subassembly in place you can insert into it components from its environment that is assembly components will be now entering the subassembly contained in that assembly You can specify a single or multiple assembly components for a repeated insertion
237. he base view is destroyed while a relation with the model is still maintained When exploding a view which is the base for an arrow view and views containing enlarged details or cuts Sections those views are exploded Exploding associatve views can be used during the stage of laying out drawings or after finishing working with them when the relation with the model is no longer relevant A drawing with exploded destroyed associative relations requires less computational resources it loads and rebuilds faster etc To restore exploded associative relations click the Cancel button on the Standard toolbar 197 KOMPAS 3D V9 User manual Recommendations on working with an associative drawing of a large assembly To speed up construction of associative assembly views in a drawing complete the following setting in the new view properties dialog for the current drawing before proceeding with their creation v Disable the options Cosmetic Threads Hidden and Library on the Options tab v Disable all options on the Lines tab The described setting will serve to keep only the model s visible contour lines in the drawing Cosmetic thread images as well as hidden and standard components can be enabled at the final stage of working with the drawing You enable cosmetic threads on the Objects tab of the Property bar when editing a view a component images are enabled using the Show command in the context menu of those compon
238. he document will again become editable If necessary switch to the normal mode of document display Entering and formatting text The users who have some experience with a popular text editor MS Word for Windows or another text processor for this operating system will find in KOMPAS 3D many familiar functionalities for processing text and will easily master the system A dotted frame is displayed once a new document is open the border of the text area and a text cursor You can enter text from the keyboard or move text fragments via the Windows Clipboard To modify character and paragraph format use the controls on the Formatting tab of the Property Bar or on the Formatting bar You can also call necessary commands from the Format menu You can select the desired font for symbols set the color an effect and other parameters 246 KOMPAS 3D V9 User manual A To call the Font Settings dialog click the Font button For paragraphs one can specify line spacing justification mode numbering type etc Be E To call Paragraph Settings and List Options dialogs use the respective buttons The Text Parameters button calls the dialog in which one can select or create one s own text style a combination of font and paragraph settings Erro Man r You can insert various objects into text special characters symbols ratios sub superscripts etc To do this use the elements on the Insert tab of the Property
239. he filling mode Note If model assosiative view was copied by clipboard to new drawing then the view should be rebuild to transfer data from this model to drawing title block Only the product designation and name can be propagated in the opposite direction from the drawing to the model Data is transferred automatically when saving the drawing Standard code and name of a document if they are present in the drawing title block do not get into the model Note The list of standard codes and names is set in codes and names file If necessary you can manually edit the existing file or create a new one Note that the described data transfer between the model and the drawing is possible if Data synchronization is enabled in the drawing Synchronization is controlled by the Data Synchronization switch It is available on the Options tab of the Property bar in the title block editing mode Hiding a component from display Right after creation the view contains the images of all components included in the assembly You can turn off components display on the view For this do the following 1 Expand the drawing s Design Tree branch corresponding to the view in which you need to hide some assembly components 2 Call the Hide command from the context menu of this component The icon of the view containing this component image will be marked in the Designed Tree by a red check which means the drawing needs to be rebuilt rE 3 Clic
240. he interface items becoming available on the Property bar define the exploding parameters and click the button Apply The selected components will be exploded according to the specified parameters If the resulting exploded state of components is other than expected edit the exploding parameters and click the button Apply again Note 1 The same component can be involved in several exploding steps Note 2 One exploding step may involve several components Note 3 A component belonging to a subassembly at any nesting level can be involved in an exploding step independently of other components in the subassembly Set the desired number of exploding steps and tune their parameters Click the button Apply If you are satisfied with the components placement click the Interrupt Command button on the Advanced Control Panel After that assembly components become exploded in the window according to the specified parameters To enable the normal display of the assembly call the command Service Explode Components Explode This command serves to switch between the exploded mode and the normal assembly display When components are exploded a check appears next to the command name Model simplified displaying mode You may enable the model simplified displaying mode when working with parts and assemblies this mode allows speding up model redraw If simplified displaying mode is disabled small assembly components and solids o
241. he library is working in the dialog mode then to start execution of a library command select its name in the list expand the appropriate library section if necessary and click the OK button You can also double click the left mouse button on the command name When working in the window or panel mode you need to double click the left mouse button on the desired library command to run it Modes of working with a library KOMPAS 3D provides for different most of working with a connected library a window dialog menu and panel The working mode is selected case by case by the user for maximum convenience Switching a mode of working with a library can be done at any time even when executing some library function In the Menu mode the library structure is displayed as a standard hierarchical menu If the dialog mode is set then the dialog will be displayed with the list of the current library commands in its left part The commands can be grouped by sections Slides are displayed in the right part of the dialog helping to find the desired command To return to regular system operation you must exit the library dialog In the Window mode the library structure is displayed in a Windows standard 25 KOMPAS 3D V9 User manual window You can change the size of a library window also minimize it leaving only its icon on the screen The main advantage of the Window mode is that unlike the menu and dialog modes the library and th
242. hen creating the first BOM object in a document drawing or model that object is created according to the style set in the system for new BOMs In this case the document automatically receives a BOM description the following objects are created with the same default style In the BOM descriptions management dialog in a drawing or model you can create more than one BOM description Several BOMs can be connected to one document but all of them should have different styles The description marked by a check in the Current column of the description management dialog is considered current The style included in it is considered the current BOM style BOM objects in a drawing or model all created according to the current BOM style and are passed into a BOM document that belongs to the current description if there is a connected BOM anyway If while in a drawing or model you call the command Create BOM objects then a 237 KOMPAS 3D V9 User manual window is displayed to enter the text portion of the new object containing the columns corresponding to the blank form of the current BOM style In the slave mode of editing objects you can only see the objects created according to the current BOM style After you make another description of current to do this select it in the description management dialog and click the button Make Current then the objects will be created that corresponds to the current style while in the
243. ic and manual object creation When you modify object parameters you may not often need to create the object right after entering all its defining parameters It is convenient to first decide whether the parameter values are correct and only after that confirm object creation Upon calling most of object creation commands two buttons are displayed on the Advanced Control Panel which control the object creation method uta One of them Automatic object creation pushed by default If you leave this button pushed then all objects will be created immediately after defining the minimum required number of parameters Undo this button if you do not need to have objects created automatically Now you can vary any parameters judging their correctness by the ghost object To confirm object creation click the Create Object button Editing object parameters To start editing parameters of an existing object for example modifying a dimension text or a hatch inclination angle set the cursor on that object and double click the left mouse button The parameter fields of the selected object will be displayed on the Property Bar You can enter the desired parameter values either manually or by using the Geometric Calculator The process of editing an object parameters is similar to the actions that are performed when creating the object by the method accepted in the system by default therefore it can use all available techniques of worki
244. ies as well as subtracting from different or multiple bodies is impossible when creating a pattern even if the copies of the elements intersect with more than one body Besides that new bodies cannot be made as a result of creating a pattern Pattern instances A pattern of elements is made of instances Each pattern instance is a copy of the source element or a group of copies of the source elements Array instances are displayed in the Model Tree as separate objects dependent on the array Element copies are in turn dependent on the instance To expand the list of instances click the mouse on the plus sign located at the left of the pattern icon in the Model Tree An instance ID number is displayed in parentheses at the right of the instance s icon In the case of a 2D linear pattern a pattern instance s ID consists of two numbers The first one is an instance s ID number along the first pattern axis the second the instance s ID along the second axis instances are enumerated starting from 1 For a circular pattern an instance s ID consists of two numbers The first one is an instance s ID number along the radial direction the second the instance s ID along the circumferential direction instances are enumerated starting from 1 For copies placed on a path an instance s ID number is counted in the order the instances follow starting from the source one If necessary you can exclude any instances from any pattern
245. iew bar to change the displayed scale of a text document Additionally two special buttons are provided on this panel for controlling the text document scale E Fi Upon clicking the Zoom to Page Width button the system will automatically pick Z2 Ithe document display scale which makes the document width equal to that of the window while after clicking the Zoom to Page Height button the document height becomes equal to the window height Just like when working with a drawing scroll bars appear if the image is zoomed in Using the vertical scroll bar you can move from one page of a text document to another flip pages of a multipage document To go to the desired page you can also use the Current Page field Selecting Layout Filling Title Block The layout style of a text document like a drawing layout includes the title block the outer and inner format frames 245 KOMPAS 3D V9 User manual However a text document unlike a drawing can contain multiple pages and its different pages can be assigned their own layout styles By default the first page layout is that of the Textual Design Document First Page GOST 2 104 68 layout styles for even and odd sheets Textual Design Document Other Pages GOST 2 104 68 Note If a template was used for creating a text document then the sheet layout styles would be governed by that template You can select different styles for them To specify the desired layout st
246. ifying the appearance and properties of an existing BOM changing the style and setting the BOM up can be combined for example modify a BOM style and then modify those its parameters that should be different from the default parameters of the given style Style change reformatting of an existing BOM Changing a BOM style is usually a more cardinal action than setting up a BOM Usually when changing the style the parameters and settings are modified that affect objects representation in the BOM table for example a BOM form or the set and settings of columns To change the current BOM style call the command Service Options Current BOM Style When changing the style a BOM will rebuild according to the following rules The BOM form will be replaced by the form that is part of the newly assigned BOM 225 KOMPAS 3D V9 User manual style BOM objects will be located in the sections and subsections with the same numbers as the former sections and subsections For example objects of the third subsection of the fifth section will still be in the third subsection of the fifth section Only the title of the fifth section may appear different from what it was when the BOM was using the previous style The objects from a section with the number that is not present among the section numbers of the newly assigned style will not be shown in a BOM It is important to understand that those objects are not deleted rath
247. ign Tree All selected views will be highlighted Copying view You can copy a finished view or several views with all the inside objects into the same or a different drawing A special command for copying a view does not exist For this purpose the KOMPAS 3D Clipboard is used To copy a view views complete the following steps 1 Select a view views by any convenient method see the topic Selecting a view 2 Call the Edit Copy command or press the lt Ctrl gt lt C gt or lt Ctrl gt lt Ins gt key combination The selected view views will be copied to the clipboard Because each view has a known anchor point the system does not inquire about its 144 KOMPAS 3D V9 User manual position as when during a regular copying of objects to the clipboard 3 Switch to the drawing into which the view views is to be copied 4 Call the Edit Insert command or press the lt Ctrl gt lt V gt or the lt Shift gt lt Ins gt key combination The view views will be copied from the clipboard into the drawing If a view with such ID is already present in the drawing the system checks whether the view contents in the clipboard can be inserted into it combine views To combine views the condition must be met of an exact match in IDs anchor point coordinates rotation angles and scales system views always adhere to these conditions If it cannot be done because of the difference in scale and view rotation angles
248. ignifying that rebuilding is required Saving bend table to a file To dump a bend table stored in the part into a file call the command Operations Features of Sheet Body Bend Table Save As In the appearing standard Windows dialog specify the filename to write the table to Deleting Bend Table from Part To delete the bend table from a part call the command Operations Features of Sheet Body Bend Table Delete In this case the method of defining the flat pattern length will change automatically for the sheet features created using a table It will correspond to the type of the used bend table The flat pattern parameter value will stay equal to the tabulated value for the current radius bend angle and material thickness A sheet part may contain features with bend angles determined automatically If these elements use a bend table then upon deleting the latter the elements are processed as follows The method of defining the flat pattern length is automatically replaced by the method corresponding to the used table type The flat pattern parameter takes the default value If sheet features with automatically defined bend angles contain bends that rely on parameter definition by a source object that is having the By source item option active see details at the Editing bends section then the the bend selection dialog appears on the screen It contains the list of bends having defined properties which allows seting up pr
249. imensions All parameter values once entered or modified immediately reflect on the spiral ghost displayed on the screen a After defining all parameters of the selected spiral type click the Create Object button on the Advanced Control Panel The created spiral will appear in the Model window and the spiral icon in the Model Tree Spiral icon in the Model Tree 99 KOMPAS 3D V9 User manual Spline and polyline Commands to create a spline or a polyline are located in the Operations 3D Lines menu group The respective command buttons are located on the 3D Lines toolbar g Spline Polyline After calling the command the Property bar will display the controls which will serve to define parameters of the selected curve type Each vertex of a spline polyline is characterized by a set of parameters Values of vertices s parameters are saved in the vertex parameters table Vertices of curves van be created by the following ways 1 Inputting data in Table of Vertex Parameters cells 2 Reading these parameters from external files 3 Selecting points in the Model window 4 Entering values in the Property Bar fields When building a sequential vertex the current segment ghost rubberbands on the screen connecting this vertex with the previous one This lets you judge correctness of the input parameters and edit them if necessary The values from the parameters table can be saved as a text file Such
250. in a Boolean operation v Inclusion of certain bodies in the operation applicability range All these relations more precisely those existing in the model are maintained through any model changes Any element is involved in parametric constraints together with its source parent and derivative dependent elements Also note that the above listed relations have the following property the dependent element adjusts to the changes in the source element the dependent element can be modified by editing the source element and the dependent element s own independent parameters Therefore the order of object creation is significant in the hierarchical parameterization unlike the variational or more precisely their dependency order the hierarchy Editing an element affects rebuilding of dependent elements only Hierarchical parametric relations between model elements are an inseparable part of this model You cannot refuse to make these relations or delete them unlike the parametric relations of graphical objects in a sketch Relations automatically occur in the course of performing model object creation commands and will persist unless those objects are deleted or edited For example when creating a sketch on a feature face the respective hierarchical relation is created As a result this sketch will stay on its home face through any changes to the model up until deleted or moved to another face Variables and expressions in mo
251. indow Select a new location of the vertex Selecting objects in the Model window x To delete a vertex select the respective parameters row and click the Delete Vertex button or the lt Delete gt key Using the lt Shift gt lt an arrow gt keys you can select several rows and delete them at once You can add a new row anywhere in the table To do this select the row before which you need to add the new one and click the Create New Vertex button or the lt Insert gt key A new vertex will be added to the spline polyline It will coincide with the previous one If necessary edit the coordinates in the cells of the new row The switches Closed Line and Open Line of the Closure group serve to close or open the curve being edited When editing a polyline you can change the radii at its vertices The switches Spline by Vertices and Spline by Poles in the Type group serve to define the method of constructing a spline You can change the order and weight in the case of a spline by poles You can replace the curve being edited by another curve whose vertices are recorded in a text file txt To do this clear the parameters table and click the Read from File button In the appearing dialog select the desired file and click the Open button The Parameters Table will be filled with values from file Parameter changes are promptly propagated in the Model window in the way of a ghost curve with updated parameters 1
252. ing 1 Call the command Select Groups The dialog with the list of named groups existing in the document will appear on the screen 2 Select the desired group name and click the OK button You can select multiple groups at once in this case the objects will be selected that belong to those groups 3 To exclude grouped objects from selected call the command Select Exclude Group 174 KOMPAS 3D V9 User manual Ungrouping You can explode a group Exploding a group ungrouping does not make any effect on the member objects To ungroup do the following 1 Call the command Service Groups The dialog for creating and editing named groups will appear 2 In the list select the name of the group to explode and click the button Ungroup 3 To close the dialog click the OK button You can simultaneously explode several groups by selecting their names in the list Using macro elements When developing products the designer uses a large number of standard parts and mechanisms Those include various fastener parts bolts nuts screws washers bearings switches jacks and so on When editing a drawing images of such parts shall be selectable movable or capable of being rotated together since selecting individual items will be tedious and inconvenient In addition since a part is standardized the individual elements of its image shall be made inaccessible for editing For working convenience in th
253. ing fragments into a document click the Interrupt Command button on the Advanced Control Panel or the lt Esc gt key Editing inserted fragments Once a fragment is inserted in a document you may need to edit the insertion parameters or the inserted objects proper If fragments were inserted exploded then the inserted objects are in no way related to each other and can be edited separately using various KOMPAS commands If a fragment is local or was embedded in the document or inserted by an external link then it is treated as an integral object and its elements cannot be selected or edited individually To modify the dimensions position or the insert parameters double click an insertion with the left mouse button The Property bar will display the same interface items as when inserting a fragment Define if necessary new coordinates rotation angle and the insertion scale for a parametric fragment the values of the external variables If you need to make changes to the insert s contents that is edit the geometrical objects themselves select the insertion and call the context menu command Edit Source KOMPAS will open a new window in which the external fragment source file will be loaded for editing if the insertion was made by an external link or a set of the insert s objects if a fragment was embedded in the document After editing is completed save the fragment and return to the window of the main document
254. ing the corner are called the sides of the capped corner Intersection line The size of the capped corner and the gap of outer faces _ between its sides is measured in the part of corner sides F f I projection on the plane perpendicular to the a gh Mapped corner angle sides Such plane can be ee corner i the intersection of Defining position of 4 1 themeasuring plane Part projection on the measuring plane view by arrow outer or inner faces of the corner sides Ta il i represented by any plane perpendicular to Al To call the corner capping command click the Cap Corners button on the Features lof Sheet Body toolbar or pick the command by the name from the menu Operations Features of Sheet Body Select a pair of adjacent bends For this select a side face of the cylindrical portion of one of them or an edge belonging to the side face The side faces of the selected bends and their adjacent flat portions of the part will 65 KOMPAS 3D V9 User manual be highlighted in the Model window the sides of the corner being capped The Options tab of the Property Bar will display controls for setting up cappings v Select an option to modify the corner sides by specifying the capping method Butt capping Capping with overlap or Tight capping In the case of Capping with overlap you can t change the direction of overlapping using the button Change Capping v Select an option to modify bends by specifyin
255. ings and fragments Each sketch involved in building a three dimensional model can be parametric The following types of parametric relations and constraints can be applied to its graphical objects v Verticality of infinite straight lines and segments v Horizontality of infinite lines and line segments v Collinear Lines v Parallelism of infinite lines and segments v Perpendicularity of infinite lines and segments v Aligning object defining points vertically v Aligning object defining points horizontally v Mirror symmetry of graphical objects v Equal arc and circle radii v Equal Length of lines v Line Tangency v Merging object defining points v Point on line v Fixing object defining points v Fixing and editing dimensions v Assigning a variable name to a dimension v Defining analytical relations equations between variables Relations and constraints marked by the can also be established between sketch objects on one side and helper ghost or specially created part vertex and edge projections on the sketch plane By default the parametric mode is turned On for all sketches Therefore many relations and constraints are applied automatically by construction commands and snaps The main difference between working with parametric drawing and working with parametric fragment consist in the following Equations relating sketch variables and assembly variables are created by entering expressions in rows corres
256. ion mode If the system is in the sketch mode then picking and specifying objects in the Model Tree is impossible even though the Tree is displayed on the screen When selecting or highlighting any object in the Tree its respective model portion is highlighted in the model window To select multiple objects in the Model Tree press the lt Ctrl gt key and while holding it select the desired objects To select multiple objects following one after another in the Model Tree select the first last of them press and hold the lt Shift gt key and then select the last first object The selection will be expanded on all objects in the group 30 KOMPAS 3D V9 User manual Selecting objects in the Model window To specify a vertex move the mouse cursor to it in the Model window When the symbolic notation of a vertex as a star appears next to the cursor click the left mouse button Te Cursor shape when selecting a vertex To specify an edge move the mouse cursor to it in the Model window When the symbolic notation of an edge as a stick appear next to the cursor click the left mouse button ty Cursor shape when selecting an edge To specify a construction axis move the mouse cursor to it in the Model window When the symbolic notation of an axis appear next to the cursor click the left mouse button S a Cursor shape when selecting an axis To specify a surface or face move the mouse cursor to it in
257. is way you can quigly modify sizes and topology of the sheet body 51 KOMPAS 3D V9 User manual bypassing editing each element separately Specifics of working with variables of a sheet part 1 The default values for the variables of a given a sheet part can be changed only when editing the sheet body or the system of equations of this part 2 If you edited a bend with default parameters by modifying some of them the value of the respective default variable will not be affected As a result of such editing bend parameter is assigned with entered value and equal constraint for the parameter and the variable is automatically deleted 3 Ifa bend parameter is changed back to the default value as a result of editing then the default variable will be assigned to this parameter only in the case when other variable wasn t assigned to it It element parameter was equated with a variable which is different from default variable then this variable is saved through any changes to the parameter 4 Bends with disabled parameter definition by the source object are displayed in the Variables window as standalone elements dependent on their source object Those bend parameters are the radius and the flat pattern parameter Bend amount or Reduce bend or Neutral Layer Factor If a parameters value matches the default then default variable will be assigned to the parameter v radius SM_ Radius v bend amount SM _BA v bend deduction re
258. isting section you just need to set the cursor anywhere in that section and call the command Add Item To create a new section use the command Add Section creating a new section a new object instantly appears in it while when deleting the A In a KOMPAS 3D BOM sections cannot exist without objects Therefore when last object from a section the section itself is also deleted A specifics of KOMPAS 3D is the capability to create and fill the sections in an arbitrary order You can first enter the standard items then create and fill in the Documentation section proceed to adding parts and then assembly units The system will automatically position the resulting sections in the standard order in the general case in the order defined when setting up of a BOM style Each new section will be placed in a strictly defined location relative to the existing sections spreading if necessary the already populated lines A section can be deleted only by sequentially deleting all objects in it Subsections Standards often requires to group objects in a section by types and inside the resulting groups sort by the name or designation code This mechanism is supported by the KOMPAS 3D BOM Groups of objects within sections are called subsections The subsections just like sections are members of a BOM style Their quantity names and order within each section are defined when setting up the style By selecting the current BOM style yo
259. ited drawing fragment or view then you may need to quickly switch between them in the course of work You can make the desired layer current as well as set up the state of other layers using the Document Manager this is described in the topic Modifying a view state However there are faster ways to select a new current layer v Select or type on the keyboard the number or name of the desired layer in the Layer Status field on the Current Status bar and it will become current v Ifthe desired layer is enabled that is made active and visible then you can switch to it as follows 1 Select any object belonging to the desired layer 2 Call up the context menu and select the Switch to Object Layer command from tt The layer containing the selected object will become current The layer that used to be current will return to its previous state Modifying layer state and parameters To change parameters and or state of an existing layer do the following 1 Call the command Insert Layer or click the Layer States button on the Current Status bar The Document Manager dialog will be displayed 2 In the Tree of Sheets Views and Layers select an object document view group of properties or group of layers containing the layer whose parameters need to be modified 3 The List of Sheets Views and Layers will display all layers of the selected object Select the desired layer among them If the layer name or number is know
260. itles in the BOM The list of blocks is created by the user The following is specified for each block v name v Number v Whether is used or not By default v Block display method from a new sheet or arbitrary v List of sections some of these parameters and settings can be modified for every particular existing BOM This is described in the Changing Existing BOM Style section Other parameters and settings can be modified only by changing a BOM style to another style that has those parameters and settings This is described in the Changing Existing BOM Style section If the BOM style with the desired parameters and settings such as a user BOM form does not exist yet then it can be created manually This is described in the Changing Existing BOM Style section 224 KOMPAS 3D V9 User manual Setting up an existing BOM A BOM s appearance and filling rules depend on the style of that BOM A BOM style consists of a large number of heterogeneous parameters and settings This is described in the Changing Existing BOM Style section The parameters and settings that do not require changes of the BOM form and changes to the structure and contents of BOM objects can be modified for each existing BOM individually Those include all general settings and some section settings the number of reserved lines in a section setting position reference numbers in it connecting geometry sorting on or off Modifying thos
261. its of a through parameterization of a particular drawing Following are some general recommendations related to drawings parameterization 1 It this beneficial to make parametric drawings of parts whose modifications include only dimension changes and not changes in the image topology Thus once created parametric model of a part can be quickly redesigned by a simple change to dimension values 2 When starting a new design decide whether it will be used in the future as a prototype serving as a template If not then you do not have to parameterize the drawing since there is no more necessity in the oncoming quick modifications If on the contrary the new parts will be often used as a standard prototype template making its drawing parametric is beneficial 3 Most probably a through parameterization of complex assembly drawings will not be justified since in this case the amount of work on introducing constraints and driving dimensions is too big while the resulting model will be hard to manage recalculating a large number of relations and constraints takes long time 4 Try to estimate using specific samples of drawing typical for you organization what benefits can be achieved by parameterization In the future take the obtained results into the account when developing a new design or when revising existing drafting documentation Specifics of using the parameter technology When working with parametric drawings and fragment
262. iven element and what elements can be affected by changes in the given element Hierarchical model parameterization A model parameterization hierarchy is possible due to the fact that the hierarchical structure of three dimensional features is permanently stored in the model file In the hierarchical parameterization just like in the variational relations existing between model elements are constantly accumulated Relations links between elements of a three dimensional model in KOMPAS 3D include v The property of sketch belonging to a plane or a flat face v The type of the feature built based on sketch v Presence in the sketch of feature edge vertex projections v Relation between a construction axis or plane and reference base elements used in its construction v Automatic definition of the extruded feature depth through all or up to selected vertex Correspondence of all array element parameters by a rectangular pattern or along a 201 KOMPAS 3D V9 User manual curve and irrored copies to the parameters of source elements v The property of the round hole belonging to a face v Involvement of some edges in making a chamfer or round v __ Trimming a part by a plane or surface of a profile v Involvement of some edges in making a thin shell v Rib orientation with respect to the sketch plane of that rib orthogonal or parallel v Involvement of some faces in making a draft v Involvement of certain bodies
263. jects into the group select a view filter or a previously created group in the Tree of Sheets Views and Layers The List of Sheets Views and Layers will display the dependent elements of the selected object Use the standard Windows Drag amp Drop mechanism and drag the desired layers to the created group symbol In such relocation the layers are not deleted in the former position You can simultaneously move several objects after you selected them lf a new group is created as a subordinate object of a view or an existing group and in this view or group layers are selected then these layers automatically will be included into the created group Upon an attempt to place an object into an invalid position a warning mark will appear next to the cursor xX To delete a group activate it in the Tree of Sheets Views and Layers and click 151 KOMPAS 3D V9 User manual the Delete button Using Groups of Layers Using a group of layers serves to simultaneously set activity visibility or color of layers which belong to this group in a similar manner When activating a group in the Tree of Sheets Views and Layers its contents will be displayed The contents of the fields in the List of Sheets Views and Layers will display the actual current state of layers belonging to this group Layer properties can be different from a layer to a layer Using the buttons on the toolbar set the state of visibility activity and color for the grou
264. k the Rebuild button on the View bar or press the lt F5 gt key The image in the drawing will be redrawn taking into account the introduced changes Hidden component icons are displayed light blue in the Design Tree To reenable the component display from the context menu of its respective item in the Design Tree call the command Show after which rebuild the drawing Hiding a component from display on one of the views in no way affects the display of that component on other drawing views 196 KOMPAS 3D V9 User manual Breaking projective relation between views Projective views of a drawing created by the Standard Views command are ina projective relation with their main view the views created by the commands Projection View View in Arrow Direction and Cut Section relate with the respective base reference views The existence of protective relations between views limits their relative relocation For example a View by Arrow can move around the drawing field only in the direction indicated by the view arrow If you need to arbitrarily position some view call the Projection Correlation command from the context menu of the view in the Design Tree By default this relation is enabled and a check appears by the command name After calling the command the check disappears which means the projective relation is disabled You can move a view in the drawing window with the mouse Another way to control a projective relation
265. l in one cell If the horizontal character compression is too much you can wrap some of the characters to the next line to do this press the lt Enter gt key at the wrapping position The text cursor is moved within the column using the keys lt Right arrow gt and lt Left arrow gt The lt Down arrow gt key moves the text cursor to the position before the first symbol in the column and the lt Up arrow gt key into the position of the last symbol Move between columns using the lt Tab gt key to move left to right or the lt Shift gt lt Tab gt keys to move right to left You can also enter the desired column of a BOM object by clicking it with the mouse If the text in some column of a BOM object is made by a filling template double clicking the mouse on this column in the mode of editing the text portion calls the dialog in which you can modify the values and text in the template fields After confirming the changes to the data in the template the text in the column is re created per the new values in the fields The text portion created by a template can be edited as usual without changing the data in the template fields To confirm the changes to the text portion of a BOM object and exiting from its editing mode press the keys lt Ctrl gt lt Enter gt or click the mouse anywhere in the window outside the lines where the edited text portion is located Editing a BOM object item geometry A situation arises often
266. l to fix the cosmetic thread on the model Gs A cosmetic thread is shown in the Model window as a wire cylinder or cone and in the Model Tree by an icon Note that a cosmetic thread is always shown in a model in its entirety For example suppose that the Trim by Surface command cuts off or slashes through a feature which bears a thread In this case the cosmetic thread will be displayed in the model in its entirety even though the surface or a portion thereof that bears the thread is not shown You can hide from the screen display an individual thread image using the Hide command from the context menu of the thread or all cosmetic threads present in the model using the commandView Hide Cosmetic threads When creating associative model views in drawings which contain cosmetic threads the latter can also be drawn on the views The user can enable or disable threads display on the views Adding Components to Assembly KOMPAS 3D offers two methods of adding components to an assembly 1 Adding prepared created in advanced and stored on the disk components This technique is used for designing an assembly bottom up A variation of this method is adding standard items and library models to the assembly 2 Creating components in the assembly mode or creating components in place This method is used when designing an assembly top down If you combine the mentioned methods of including components into the assembly Som
267. large number of components rebuilding it can take a significant time Therefore if you need to edit several components of a complex assembly it would be rational to rebuild it just once after making all changes rather than each time after editing an individual component To postpone rebuilding the model press the No button of the dialog The prompt to rebuild the assembly will disappear while the icons of elements or components that caused inconsistencies in the model will be marked in the Model Tree with a red check Checkmarks the alerts of the model needing a rebuild could also appear in the Model tree after a change in a component s position or a variable value corresponding to an element s parameter You can rebuild the assembly at any time a To do this click the Rebuild button on the View bar or call the command View t Rebuild 126 KOMPAS 3D V9 User manual sometimes upon rebuilding an assembly exclamation signs appear in place of checks signifying an error building a component mate or assembly element For example a sketch of an extruded cut was constructed on the part s face During editing this part was moved so that the sketch while still staying in the face plane no longer intersects the part s solids in the extrusion The extrusion can no longer be cut and after the model rebuilding this operation is marked as failing in the Model Tree Or for example an element involved in the mate c
268. layer is the layer of the part material that is not deformed when bent The intersection line between the neutral layer of a bend and the plane perpendicular to the bend line is called the neutral line The flat pattern length of the cylindrical portion of a bend is defined as the length of the neutral line in it i L m R K 789 where L the length of the neutral layer R inner bend radius S sheet thickness K Neutral Layer Factor a Bend angle The K coefficient defines the position of the neutral layer where t is the distance from the inner bend surface to the neutral layer Defining the length of a bend flat pattern by specifying bend reduction The flat pattern length of the cylindrical part of the bend is calculated by the formula 2 a BD where BD the acronym for Bend Deduction a bend reduction to be defined by the user a a geometrical parameter of a bend it is defined by the system automatically a lt 90 a 90 a gt 90 53 i KOMPAS 3D V9 User manual a R S tg a 2 a Rt S Defining the parameter a for different bend angles The full flat pattern length L when unbending is calculated by the formula L A B BD a b Unbending a bend a Bend is bent b the bend is unbent Note For bend angles greater than 90 degrees the bend deduction value BD can be negative Defining the length of a bend fla
269. le only by creating an associative dimension which will characterize this parameter and assigning the variable name to that dimension 5 You should not expect that parametric relations will be automatically created when 204 KOMPAS 3D V9 User manual applying relations and constraints 6 Remember that the processing time for a parametric model is steeply dependent on how densely a drawing of fragment is populated with parameterized objects Wholly constrained model is calculated much faster then unconstrained Displaying Constraints and Degrees of Freedom It is much more convenient to work with this parameter image for example a sketch if besides the geometrical objects proper their applied constraints and degrees of freedom are also displayed The following commands serve to display constraints and degrees of freedom Display constraints Display degrees of freedom These commands are located in the menu Tools Adding Constraints Constraints and their call buttons on the Adding Constraints bar After calling the command Display Constraints the symbols will be displayed that depict constraints applied to objects while after calling the command Display Degrees Of Freedom the symbols showing the degrees of freedom possessed by objects Constraints and degrees of freedom are displayed on the screen as long as the respective buttons are pushed To hide all symbols of a certain type release the respective
270. le profile selection dialog s preview pane while the sketch itself lies in the plane of the face on which the hole was created Therefore the point indicates the hole center position on the face Move the hole center point to the desired location by any method You can use snaps and or apply parametric relations to the point For example if you need the hole to be positioned exactly in the center of a rectangular face you can draw an auxiliary line connecting the diagonal points of the face and snap the point to its middle After that the center of the hole will stay exactly at the center point of the face throughout any changes in the face dimensions After making necessary changes in the sketch call the Operations Sketch command once more or click the Sketch button again The hole will rebuild to accommodate the new center position lf you need to relocate a hole to another flat face call the Change Plane command for the sketch of the hole center 120 KOMPAS 3D V9 User manual Editing hole parameters When editing hole parameters you can change the hole type profile and its geometrical dimensions After calling the command the Property Bar displays the same controls as those used when creating this object You can select another sketched hole profile from the list and modify any values of the hole parameters In some cases you can select another method of defining the hole depth for example instead of the Through A
271. less of on what layers they were positioned before Another way is to place objects on the respective layers At the same time the currently nonexistent layers for placing objects will be automatically created To select an option for inserting objects use the switches To Current Layer and To Source Layers in the Mode group on the Property Bar The further sequence of steps pasting from the clipboard defining the rotation angle and scale pasting in several different places of the document is fully similar to the action of pasting objects from one layer described in the topic Pasting objects from the Clipboard 163 KOMPAS 3D V9 User manual Local coordinate systems Using local coordinate systems When working with a drawing or fragment you always rely on a coordinate system in which object positions are defined There are fields on the Current Status bar for reading and entering coordinates KOMPAS 3D uses the right hand oriented Cartesian coordinate systems The origin of a drawing s absolute coordinates is always in the lower left corner of the format outline frame In the case of a fragment there is no meaning to an absolute coordinate system there are no apparent bounds as in the case of a drawing therefore when creating a new fragment the coordinate system origin is displayed in the center of the window Using defined by default coordinate system is far not that often convenient There are situations throughout
272. ll option select the option To Vertex and pick a vertex in the Model window Crer To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command button Changing the creation order A convenient technique of editing a model is dragging objects by the mouse in the Model Tree In this way you can quickly change the creation order Note The design sequence can be modified if the the design sequence of a three dimensional model in the way of a structured list tree is enabled in the Model Tree To move an element in the Model Tree place the cursor on it depress the left mouse button and while holding it drag the mouse cursor to the desired element location in the Model Tree J While doing so the cursor appears as an arrow indicating the element position When the desired element location is reached release the mouse button The element icon is placed in the Model Tree at the specified position and is marked by a red check This means the change in the creation order has not been yet propagated to the model the image in the window remains the same w To rebuild the model click the Rebuild button on the View bar or select the m command item from the Operations menu After calling the command the model is rebuilt the image in the window adjusts according to the introduced change and the check disappears in the Model Tree Sometimes as a resu
273. ll the command File Print to Start printing the document on paper 5 You can also click the Print button on the Control bar 250 KOMPAS 3D V9 User manual Printer plotter selection and setup KOMPAS 3D can output documents to any external device for which there is a Windows supported driver Such drivers are included in shipments of all modern peripheral devices A plotter or printer is called connected or accessible if its name is displayed in the list of available devices The device driver can be incorporated in Windows via the Windows Control Panel To get information about how to connect a printer or plotter refer to the documentation on Windows OS and on the output device that you have To select the desired plotter printer and set up its parameters complete the following steps 1 Click the Plotter Printer Setup button on the Control bar or call the respective command from the menu File 2 In the displayed Printer Setup dialog select the desired device name from the list of available devices 3 Set the desired paper size and page orientation The paper size is selected from the list of sizes supported by the printer or plotter 4 Choose the desired paper feeding method when printing 5 If you need to run the setup of various printing parameters grades of colors saturation etc the particular set depends on the device type click the Properties button to access the system dialog of the device
274. llowing sections for information about creating elements of various types ig Extrude ay Revolve r Sweep d Loft When making an operation with a sketch you can specify whether the created element will be a separate body or it should be merged to other bodies Obviously the first feature is always a stand alone body while there is a choice when creating consequent features 44 KOMPAS 3D V9 User manual Sketch requirements Usually a sketch serves as a section for a three dimensional feature Less often a sketch serves as a path to sweep another sketch the section Not every sketched image is suitable to create a three dimensional element it should obey certain rules v The sketch contours must not intersect and or have common points v The sketch contours do not self intersect v The contour in the sketch is displayed using the Normal line style Note Sometimes to create a contour in a sketch in particular a parametric one auxillary objects may be required that do not belong to the contour Those can be depicted using different line styles such objects will not be accounted for when making operations v A sketch just like a KOMPAS fragment may contain several layers When executing the operation the objects are accounted for in all layers except for the hidden ones v Fragment insertions and macro elements inserted from the clipboard or from libraries are disregarded when performing the operation To b
275. lowing commands 8 Zoom to Page Width A Zoom to Page Height Snaps While working with a graphic document you constantly experience the need to place the cursor precisely to a specific point a coordinate system origin a circle center a segment end etc in other words snap to existing points or objects Without such a snap you cannot create a precise drawing KOMPAS 3D offers a capability to snap to defining points intersections boundary points centers etc and objects normal to along coordinate axes Two flavors of snaps are provided a global acting by default and a local one single use The global snap if enabled works constantly as you create and edit objects For example if the global snap to intersections is enabled then when creating each point the system will automatically search for the nearest intersection within the reach of the cursor s catcher A local snap needs to be called again each time After using one of the snap choices the system does not remember what the choice was Therefore when you need to apply the same snap to another point you will have to call it again This is inconvenient if you need to make several similar snaps in a row A local snap has a higher priority than a global one that is when calling some local snap command the letter will override the established global ones for its activity period until inputting a point or canceling For more detail on snaps refer to the f
276. ls of a dimple or drawn cutout enter the inclination angle value in the Angle field Rules of inclining side walls of a dimple or drawn cutout The zero value in the Angle field means having no inclination To round side edges enable the Edge Fillet option and enter the rounding radius To round base edges enable the Base rounding option and enter the rounding radius To round bottom edges enable the Bottom rounding option and enter the rounding radius Note If a dimple or drawn cutout is created with rounding bottom and or base edges then it is impossible to simultaneously satisfy the specified angle radii and height values in the cases of small relative to radii heights of that dimple or drawn cutout Since the height 69 KOMPAS 3D V9 User manual and the radius have a higher priority the value entered in the Angle field will be ignored The slope angle of side walls is calculated by the system automatically this is in fact the inclination angle of lines tangent to side walls since their planar portions become degenerate in these cases The values of the height inclination angle radii as well as the direction and fixed side of a dimple or drawn cutout can be set using defining points To save current parameters of a dimple or drawn cutout for use throughout the session enable the option Default All changes are immediately reflected on the ghost of a dimple or drawn cutout in the Part Window If a dimple or dra
277. lt of changing the construction order notifications about errors appear in the model That means the new construction order contradicts the hierarchical parametric relations between objects Note Sometimes changing the order of building a model brings the object relations hierarchy is not fully saved Example Editing component in place Editing in place in the assembly context is editing a component in the assembly window to which it belongs At the same time all the rest of the components are shown in the window the environment or the situation and the commands to move and rotate the assembly change it scale orientation and display type are available It is especially convenient to edit In place the component elements that were constructed using Surround for example an element extruded upto a face of a neighboring part or a construction axis passing through the coordinate origin of another 121 KOMPAS 3D V9 User manual component In other words the elements that were created in the assembly contents should preferably be edited in the context of the same assembly To start editing a component in the current window select the desired component in the Model Three and call the Edit in Place command from the context menu or call the command Edit Component In Place from the Edit menu You can also click the Edit in Place button on the Control bar Edit in Place button Editing component in window
278. m automatically this is in fact the inclination angle of lines tangent to side walls since their planar portions become degenerate in these cases The values of the height inclination angle radii as well as the direction and fixed side of a dimple or drawn cutout can be set using defining points To save current parameters of a dimple or drawn cutout for use throughout the session enable the option Default All changes are immediately reflected on the ghost of a dimple or drawn cutout in the Part Window If a dimple or drawn cutout sketch expands beyond the limits of the base face then the dimple or drawn cutout Is trimmed by the plane planes of the respective end face see figure end Face ket To Onini the Drawn Cutout creation click the Create Object button on the Advanced Control Panel 11 KOMPAS 3D V9 User manual Bf A drawn cutout will be created in the part and its icon in the Model Tree Louver command Serves to create a louver by a straight line in a sheet part Two louver types are available Drawn and Trimmed see figure drawn trimmed Note In fact a louver creation is not a bending operation rather it is a deforming operation where the sheet material is stretched and its thickness reduced When performing the Louver the command this change in the material thickness is disregarded Line segments are used in louver sketches The face containing the louver sketch is considered the bas
279. m can be moved off its default position using the command Locate Sketch Such relocation in the coordinate system position and angle will be maintained if the plane is changed A geometry producing feature and based on it elements will rebuild according to the new sketch position A sketch transferred onto another plane loses the information as to on what plane it was originally created and is not different in its properties from a sketch created on the given plane Note If graphical objects in the selected sketch have parametric relations with a helper ghost or projections of existing vertices and or edges then after calling the Change Plane command a prompt will be displayed about a possible destruction of those relations upon changing the plane You can confirm the plane change or reject it The Change Plane command is convenient to use for carrying protrusions or holes over to another face of a part Editing Element Parameters The shape and dimensions of an element are determined not only by the shape and dimensions of the contour in the respective sketch but also the parameters of the geometry creating operation for example the extrusion depth or the angle of rotating the contour of the sketch Some elements construction planes and axes chamfers fillets etc do not use a sketch and are fully determined by the parameters defined in their creation command To modify these parameters select the element in the Model Tree
280. m similar operations in other Windows applications Therefore you can successfully use all techniques of opening and saving files with which you are familiar from other systems Refer to the following sections to read about working with document files v Creating new document v Opening an existing document v Saving document v Saving Document under a different name v Saving all documents v Closing document Document Windows Management KOMPAS 3D allows working simultaneously with several different documents Any document whether a newly created one or opened for editing is displayed in a separate window If necessary you can work with the same graphic document drawing or fragment in several windows To open an additional document window call the command Window New Document Window Different parts of a document can be displayed in different windows to different scales Each window has a title that contains the name of the displayed document the system menu button and the window management buttons The techniques of working with windows are quite standard dragging a window at its title by the mouse resizing window borders etc and are none different from those accepted in other Windows applications To conveniently arrange document windows on the screen use the commands Cascade and Tile from the Window menu Any document window can be minimized to a button or icon This can be convenient in the case when the document i
281. me model machining stations on a workshop floor plan simultaneously 172 KOMPAS 3D V9 User manual To assign a group attribute select the desired objects and perform the steps similar to assigning an individual attribute Generally upon selecting an object in the drawing and calling the command Service Attributes you will see in the list both proprietary individual object attributes and shared across other objects group attributes The group attribute names are separated from the individual names The group attributes are marked by asterisks If all objects are selected to which a group attribute was assigned then the asterisk will not be displayed next to the attribute name The group attributes just like the individual ones can be viewed edited deleted copied moved to the clipboard etc Upon an attempt to delete or edit a value of a group attribute the system will display a warning message Operations with group attributes have a number of peculiarities 1 A group attribute is deleted only after it is deleted in the last object in the group or if it is being deleted upon selecting all objects in the group 2 Moving cutting a group attribute into the clipboard is done according to the same rules as the deletion 3 If a group attribute value is being edited then it will change for all objects in the group 4 If an object was selected and you moved cut a group attribute from it into the clipboar
282. me to an associative dimension complete the following steps 1 Double click the left mouse button on the parametric dimension text The dialog for entering the dimension value and variable name will be displayed 206 KOMPAS 3D V9 User manual lz Another way is to call the command Modify dimension value on the Adding Constraints bar and specify the dimension which needs to be assigned the variable name 2 Enter the variable name in the respective field of the appearing dialog When assigning a variable name to a dimension that name may contain letters of the English alphabet case sensitive Western numerals and the underscore characters _ The length of a variable name may not exceed 16 characters The first character in the variable name is a letter or an underscore You can edit the dimension value at the same time 3 Click the OK button After exiting the dialog the input variable name is shown in parentheses below the respective dimension text To display a variable name the same color is used as to highlight objects by default red A variable name is displayed on the screen but is not printed on the paper A dimension which is assigned a variable name must be an unfixed one To make a dimension value constant activate the window for working with variables and equations and enter a relation that uniquely defines the variable value for example A 58 Converting an ordinary model into parametric To conv
283. meter is active that is the system expects a value to be input for this particular parameter Upon entering this value the next parameter becomes active When creating objects then parameters activate in the order set in the system by default However the user can change it if necessary To activate an object parameter click the left mouse button on its name not on the switch nor in the input field The parameter will become active and you will be able to specify its value Suppose you need to create a line of a specified length parallel to another one and ending at a given point Call the parallel line creation command select the current line enter the line length and fix it By default the point that you select in the document field will be treated as the start point of the line therefore the currently checked is the t1 parameter To be able to select that same point as the end point of the line activate the t2 parameter by clicking the mouse on its name Check disappears from the t1 parameter box and instead appears on the t2 parameter box theghost of the segment being created will flip by 180 degrees Now 26 KOMPAS 3D V9 User manual specify the line end point by snapping to the desired point You can activate not only parameters that were not yet assigned values but also the fixed parameters for example when editing objects In this case activating a parameter is equivalent to releasing it Automat
284. meters are modified but the changes are not propagated to the model To rebuild the model click the Rebuild button on the View bar or call the EE command View Rebuild The module will be rebuilt according to the new variable values and the checks in the Model Tree will disappear Auxiliary axis When editing an auxillary axis you can change the parameters that were defined for that axis at creation and assign other base source elements but you cannot change the used set of parameters and elements that is the method of constructing the axis For example when editing an axis going through two vertices you cannot convert it into an axis by an intersection of two planes After calling the axis editing command its source element icons are shown in red in the Model Tree For example if an axis was going through an edge then highlighted will be the element to which that edge belongs if an axis is created by an intersection of flat faces then the elements are highlighted to which those faces belong To change the set of source objects de highlight them by the mouse and pick new objects instead of the excluded ones Auxiliary construction plane When editing an auxillary plane you can change parameter values that were used for defining that plane at creation and assign other base source elements but you cannot change the used set of parameters and elements that is the method of constructing the plane For example
285. method in the printer You can divert text document output from a printer into a special file containing a set of commands written in the current printer s command language This may be needed if the printer on which the document to be printed is connected to another computer and there is no KOMPAS 3D system installation on that computer Printer files in KOMPAS 3D by default use the extension prn The saved file with printer commands can later be printed by standard means directly from MS DOS or Windows You can define the range of pages to print all pages the current page individual 254 KOMPAS 3D V9 User manual pages by page number even or odd lf you need to print several copies of a document enter the desired value in the field Num Of copies The Collate option sets the order of printing document copies If the option is disabled then all copies of the first page will be printed first then the copies of the second one and so on If the option is enabled then the entire first complete copy of the document or selected pages is printed followed by the second set and so on for all the rest of the copies You can define the output scale or use the auto scale functionality to fit the document pages into the actual printable area its dimensions are displayed read only in the upper portion of the dialog 255 KOMPAS 3D V9 User manual Libraries General library information There are a vast number of parts and m
286. mfer and then enter its parameters the lengths of the sides or a side length and an angle Similarly when creating a hole you just need to select its type for example a blind hole with a countersink or counterbore and enter the respective parameters To perform operations for creating auxiliary construction elements you can use commands from the Operations group The respective command buttons are located on the Edit Part toolbar Chamfer Fillet Hole Draft Tupe Rib Trimming a portion of a part You can delete a model portion by the border represented by a plane or by a ruled surface produced by extruding an arbitrary sketch Generally speaking such actions can also be performed using the Cut Extrude command but that would require defining many parameters and a more complex sketch them that for trimming a portion of a part To perform the operation of trimming a portion of a part by a surface slashing through the part call the command Operations Trim By Surface To perform the operation of trimming a portion of a part by a ruled surface slashing through the part call the command Operations Trim By Sketch The respective command buttons are located on the Edit Part toolbar 84 KOMPAS 3D V9 User manual trim by Surface WB Trim by Sketch Shell A part can be converted to a thin wall shell When creating a shell the entire part body is excluded from calculations Suppressed while a layer of ma
287. mmand button Split line When editing a split line you can change the direction of sweeping projecting the sketch and pick other faces for splitting After calling the split line editing command its source element icons are shown in red in the Model Tree Highlighted in the Model window are the sketch of the split line and the faces it splits To select different faces to split de highlight the previously selected faces and select new faces or simply add new faces to the already selected Tip If you need to de highlight all previously selected faces click the mouse on a blank space in the Part window To change the direction of sweeping projecting the sketch activate the appropriate switches on the Property bar sr To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command button Editing hole position Sometimes you may need to change the position of a hole on a face while keeping the rest of the parameters To relocate a hole expand the section in the Model Tree which corresponds to that hole and focus on the sketch contained within alternatively select any face of the hole Call the context menu command Edit Sketch The system will go into the sketch editing mode with the sketch containing a single construction point This point corresponds to the snapping point of the hole profile sketch the snapping point was marked in red in the ho
288. mn of This Type v Value Type in Column v presence or absence of a link with title block entries of the drawings connected to the object v whether is used in the model When setting up an additional column that contains numbers you can enable the capability of summing up the values of auxiliary parameters in this column with or without multiplying by the quantity Each additional column settings are the default for the entire BOM 5 Sections This is the largest block of settings The list of sections is created by the user You can toggle on or off breaking a BOM into sections and displaying section titles in a BOM For each section v specify Name Number Number of reserved lines in it Type rule of sorting v Enabled or disabled Setting reference numbers in this section Capability to connect geometry to the section objects Sorting items in section Division to subsections Using of nested sections v Select a method of filling columns in a section only manual filling or allowed to pass data from attached documents v List of subsections is created You can set up the columns of the form and additional columns in a given section so as to have their filling rules different from the default defined when setting up the columns proper and additional columns v Toggle on or off filling each particular column in a given section v Value Type in Column v Toggle off or on the relation
289. n 110 KOMPAS 3D V9 User manual Editing cosmetic threads When editing cosmetic threads you can change the values of quantitative and qualitative parameters which were defining the thread at creation After calling the command the Property Bar displays the same controls as those used when creating this cosmetic thread You can select another reference object start and or end boundary change the diameter the thread length or direction Parameter changes are promptly propagated into the Part window in the way of a ghost feature with updated parameters sr To confirm the changes click the Create Object button on the Advanced _ Control Panel to reject them the Interrupt Command button Edit the model using End of Model Design marker By using the End of Model Design rollback marker you can exclude model elements from calculation delete them and use it for changing the order of building a model Note The marker is displayed in the Model Tree if the design sequence of a three dimensional model in the way of a structured list is enabled Move the Marker so to make it split The Model Tree into two portions You will see that the elements that are below the Marker are displayed in the light blue color and are marked with a lock icon Those are the elements excluded from calculations Such elements and their derivatives are not displayed in the model window however information about them is saved in the d
290. n convenient to turn on the grid display on the screen and have snapping to its nodes In this case the cursor moved with the mouse will no longer move smoothly rather it will be skipping from a grid node to another node thus being bound to a certain step This working mode can be compared with drawing an image on a square ruled plotting paper The grid is not part of the document and serves only for the working convenience The grid points are never output on paper when printing the document KOMPAS 3D offers the widest choice of options for of displaying and customizing the grid The grid can be made to look different in different windows It is possible to set different grid steps by the respective axes to draw the grid with nodes or to assign a grid reversed with respect to the current coordinate system or a nonrectangular skewed grid Additionally the grid display on the screen is not rigidly bound with the snapping set to this grid KOMPAS 3D V9 User manual System accelerator keys Accelerator keys are provided in the system for frequently performed actions Key combinations Description System wide actions lt Enter gt lt Spacebar gt Fix Enter Point lt Esc gt Cancel the current command close a menu group or dialog lt Delete gt Delete all selected objects lt Ctrl gt lt gt lt gt Zoom in or out the image in the current window relative to the window center lt Shi
291. n then to select the layer you can use the Search Range field located in the lower left corner of the Document Manager 4 Set the state of the selected layer using the buttons on the Document Manager toolbar v Make current v Active v Background v Visible v Hidden The states of layers can also be modified by clicking the icons in the fields of the List of Sheets Views and Layers 5 If necessary you can change parameters of the layer number layer name color in active state commentary 6 After finishing editing state and parameters of a layer click the OK button of the 147 KOMPAS 3D V9 User manual Document Manager To quickly change the state of several or all layers at once it is convenient to use groups of layers and groups of layer properties and also layer filters To quickly change the status of individual layers you may find it convenient to use the Layer Status field on the Current Status bar Note Remember that you cannot change the state of the current layer Creating New Layer To create a new layer complete the following steps 1 Call the command Insert Layer or click the Layer States button on the Current Status bar The Document Manager dialog will be displayed 2 agin the Tree of Sheets Views and Layers select the object document view Iproperty group or group of layers to create a new layer and click the Create Layer button on the Document Manager toolbar The List of She
292. n images on any view except for the system ones Note One can proceed with creating an image right after creating a new drawing At this objects will be arranged in the system view Note however that this working order will make unavailable the main advantages listed above since no scale or position change is possible in the system view Placing views on a sheet The drawing arrangement becomes much simpler if each image is placed in a separate view In this case the scale position and the rotation angle of any image can be quickly changed To change the scale of a view call its context menu in the Design Tree and select the desired scale from it Example After that the geometrical objects line segments arcs etc contained in the view will update grow or shrink according to the specified scale At the same time the lines weight arrows length and font size in annotation labels symbols size etc does not change The dimension values will also remain same For example on the figure 1 the scale of the view containing the bushing image is 2 1 To fit specifications on the sheet the image needs to be shrunk To do this change the view scale to 1 1 Fig 2 135 KOMPAS 3D V9 User manual aby LLU ity 1 SS Te er TA Pe 2 5 REREN YE fE PE ra ma Be Finini ip gA ar Sane a ane nh e ieee A Th EEEE Sayers iher s mm hne lenar A ae J _ Fig 1 Fig 2 To change the position of a view
293. n proceed with editing a component in the window by opening its file in the usual way click the Open Document button or call the command File Open and select the desired file When using the Edit in Window command you do not need to search for the desired file in the list the system finds it automatically Synchronizing the title block and the model When creating associative model views in a drawing the following data about this model is passed to its title block v Designation v Name v Material v Mass 195 KOMPAS 3D V9 User manual Designations and names of models are transferred to the drawings from part or assembly files The Material cell is filled only in title blocks of part drawings Material information is also passed to drawings from part files The specified data is entered or edited when working with a model document m3d a3d using the interface items on the Property Bar To access them call the Properties command in the context menu of the model icon in the Model Tree The part mass is calculated automatically according to the material density and part shape The assembly mass is defined as the combined mass of its components While working with a drawing you can at any time synchronize the data in the drawing s title block and in the model properties Thus to get data from the model designation name material or mass call the synchronize Data command from the context menu of the title block in t
294. n the Property Bar Using these items define parameters of the second extrusion direction similar to the described above v Specify the direction of adding material inward or outward with respect to the surface swept by the sketch moved in the required direction To do this use the switches in the Direction for thickening group v Enter the thickness of the material layer to be added sheet body thickness in the Thickness field v Enter the inner radius for bends corresponding to corners in the contour in the Bend radius field The zero bend radius is not allowed The minimum value is 0 0002 mm v Select the method of defining flat pattern length v The option Unbend controls the state of a sheet body If it is enabled then construction will result in unbend sheet body When the option is switched off all bends become bent 35 Upon entering the parameters finish the construction l gp Example of a sheet body with an open sketch Note that bends on a sheet body created from an open sketch are a in the Model Tree as standalone objects 59 KOMPAS 3D V9 User manual Elements of sheetpart Bends General techniques of handling bends The bends cylindrical portions of a sheet part are created in it when performing the following commands v Bend v Bend by line v Release Each bend has the following main parameters v The radius value and its type outer or inner v The angle value and its sense the bend a
295. n the inclination angle field then in the upcoming menu pick the Slope of Line command and select with the cursor the line segment parallel to which the construction should be made The value of the inclination angle with respect to the displayed X axis of the current coordinate system will be measured entered in the appropriate field of the Property Bar and fixed Therefore the Geometric calculator capabilities allow using parameters of already existing drawing objects when creating or editing other objects Detailed information about each command of the Geometric calculator is provided in the Geometric calculator menu section Geometric calculator menu This menu is displayed when clicking the right mouse button when the cursor is over any of the Property Bar fields at the time of running various object creation or editing commands You can use menu commands to read the values of geometrical parameters point coordinates dimensions angles etc from objects to have them be automatically entered in the fields of the Property bar An appropriate set of commands will be generated depending on which input field the cursor was over at the time of accessing the menu v When entering point coordinate values the Geometric calculator menu commands become similar to those of the snaps menu Nearest Point Intersection Midpoint 160 KOMPAS 3D V9 User manual Center point Point on Line On Line Nearest to Another v When entering line
296. n the model window faces stitches auxiliary elements etc while selecting them hold the lt Ctrl gt key down To make multiple parts current in the Model window select them while holding down the lt Shift gt key Note You can combine selecting groups of objects and the parts This means first you can select for example several objects by holding the lt Ctrl gt key down then release this key press the lt Shift gt key the objects stay highlighted meanwhile and while holding it select several parts Thus a group of objects and a group of parts will be simultaneously selected in the model window Model Rotation When creating a model you may need to view it from different sides To do this KOMPAS 3D supports model rotating spinning he rotate the model click the Rotate button on the View bar or call the View Rotate command You can spin the model about the center of the outline box about a specific point a vertex a center of a sphere about an axis an auxiliary access a straight edge an axis of an operation or about an axis going through a specified point on the plane an auxillary plane or a flat face of a part perpendicular to it To quickly rotate spin the model about the center of the outline box without calling the dedicated command you can use lt Ctrl gt lt Shift gt lt arrows gt keys When using key combinations lt Ctrl gt lt Shift gt lt Up arrow gt and lt Ctrl gt
297. n the number extension keyboard The NumLock mode must be enabled the NumLock indicator is lit lt Ctrl gt lt 0 gt Move the cursor to the 0 0 point of the current coordinate system lt Ctrl gt lt Shift gt lt 5 gt Position the cursor in the element defining point 20 KOMPAS 3D V9 User manual nearest to it including what is on Background Views and Layers lt Ctrl gt lt 5 gt Position the cursor in the element defining point nearest to it not including what is on Background Views and Layers Note This key combination is also available when the NumLock mode is disabled In this case it serves to position the cursor in the element defining point nearest to it including what is on Background Views and Layers lt Ctrl gt lt gt Position the cursor normal to the nearest point of the nearest element lt Alt gt lt 5 gt Position the cursor at the nearest to it point of two entities intersection lt Shift gt lt 5 gt Position the cursor at the nearest to it mid entity lt Ctrl gt lt 1 gt Snapping to nearest element along the diagonal between the negative direction of the OX axis and the negative direction of the OY axis of the current coordinate system lt Ctrl gt lt 2 gt lt Ctrl gt lt Down Arrow gt Snapping to nearest element along the OY axis negative direction of the current coordinate system lt Ctrl gt lt 3 gt Snapping to ne
298. n the system automatically creates several reserved lines their number is defined by the user Those lines are always positioned in the end of a section regardless of in what order you were adding BOM objects to it and you never can enter data into those lines During position reference numbers setting in each section the number of reserved lines in the previous section is accounted for For example the Parts section ends in the position number 46 and contains three reserved lines Then the Standards Items section that follows will start from the position number 50 since the position reference numbers 47 48 and 49 are reserved for the future changes Even after entering new or deleting existing objects in the Parts section the number of reserved lines in it will stay unchanged and the automatic position reference numbers setting command will provide for keeping the distance between the position numbers in the neighboring sections Reference Numbers creation From the designer s view point the main connecting link between an assembly and the respective BOM is the reference numbers Only due to the numbers on the shelves of leaders and in the column Position it is possible to set up the correspondence between an item depicted on the drawing a part or a mechanism and a line of a BOM This correspondence can be maintained by a KOMPAS 3D BOM automatically in this case the position reference number of a BOM object is pa
299. nal In other words to construct an element referencing objects from an external file you can specify other objects available in the current file The edited in this way element loses the relation with the assembly If on the other hand it is required that the element defined in the assembly context does not lose the relation with it then you need to edit it in the context of that assembly Edit in Place Editing geometry producing assembly features When creating an assembly KOMPAS 3D provides operations for cutting out geometry producing features creating a round hole and trimming a model The following reference sections describe specifics of editing certain features Cut Extrude feature Cut Revolve feature Cut Sweep feature Cut Loft feature Trimming by a plane and by a sketch 122 KOMPAS 3D V9 User manual Hole Editing mates To edit a mate do the following 1 Select the mate in the Model Tree The selected mate will be highlighted in the model window 2 Call the context menu command Edit The Property Bar will display the same controls as when creating a mate 3 Modify mate parameters 4 Ed To modify objects involved in a mate click the button Specify Other Selection of one of the mated objects will be cleared 5 Select another object for mating If you need to modify both of objects involved in the mate click the button Select Other two times Selection will be cleared from both objects a
300. nally rounding approximation of fixed parameter values is not done For example when constructing a line segment parallel to a given one you can enter any value in the Distance field on the Property Bar and fix it When selecting the start and end point of a line its length will be rounded while the distance to a reference will not Rounding values when working with a three dimensional objects occurs when dragging their defining points Note that in parts and assemblies it is possible to round not only linear but also angular values Additionally when dragging a defining point of a three dimensional object the name and value of the respective parameter is displayed on the screen regarding of the mode of the option Display Command Parameters in the Cursor Properties dialog Saving parameters Quite often it is necessary to create several objects that have a number of identical parameters A typical example is constructing concentric circles with the coinciding parameter being the center point KOMPAS 3D can remember a parameter value and use it for building new objects but only within the current command Let s review examples of using this working technique Call the circle creation command mj Fix the circle center point and then click the button Remember Status on the Advanced Control Panel The button will stay pushed indicating that the parameter is remembered Now subsequently select the points lying on the respec
301. name can be edited Groups of layer properties are saved in the document _ Creating Layer Properties Groups To create a group select a place in the Tree and click the Create New Property Group button This button is accessible if when selecting the method of group layers in a document the selected option was Group Properties The new group icon will appear in the specified location The text cursor will appear in the group name field You can change the default name After pressing lt Enter gt or clicking the mouse outside the group name it will be fixed You can change the name of an existing group by using standard Windows means To put the desired objects into the group select a view filter or a previously created group in the Tree of Sheets Views and Layers The List of Sheets Views and Layers will display the dependent elements of the selected object Use the standard Windows Drag amp Drop mechanism and drag the desired layers to the created group symbol In such relocation the layers are not deleted in the former position You can simultaneously move several objects after you selected them oe an attempt to place an object into an invalid position a warning mark will appear next to the cursor If when selecting a method of grouping layers in a document the Inherit parent item structure option is enabled then those parent object layers will be added automatically to the group being created whose current property val
302. nd you will be able to specify new elements to mate If the shape of the selected elements and the existing relations and constraints do not conflict with the mate then the assembly will attribute in such a way as to satisfy the mate condition 6 To confirm the changes click the button Create Object on the Advanced Control Panel Note When editing a mate you cannot change its type that this cannot turn for example an At Distance mate into a Parallel one Moving assembly components You can edit the assembly by moving one or several its components KOMPAS 3D supports the following methods of relocating assembly components v Component translation v Component rotation about the center of its outline box v Rotating a component about an axis v Rotating a component about a point A component cannot be moved in the following cases 1 A component is fixed Fixing and Unfixing a component is performed by the respective option in that component s Properties dialog 2 Acomponent s translation in the selected direction is restricted by the mates applied to that component For example coaxial components can be moved only along their common axis or turned about it A part with an In Place mate applied can move only together with the object on whose plane or faced it is built If an assembly projection plane was used to construct a part then the latter cannot be moved or rotated in the coordinate system of that assembly 123 KOMPAS 3D V9
303. ndividual parts with the purpose of their oncoming assembling one needs to precisely realize their relative positions and the topology of the entire product calculate and remember or meticulously write down dimensions of certain parts in order to match those with dimensions of other parts To illustrate the Bottom Up design approach consider the following analogy with the process of creating design documentation the Bottom Up approach is similar to composing an assembly drawing from ready made part drawings should some parts mismatch one would have to make changes in their drawings and only after that fix the assembly Assembly design Top Down If not all components exist yet those can be modeled directly in the assembly In this case the first component for example a part is modeled as usual and then existing components are used when modeling the oncoming ones For example a new part base sketch is created on a face of an existing part and follows its contour and the path to sweep the sketch is defined by an edge of another part In this case associative relations between components arise directly in the course of construction later wnen editing some components others are automatically rebuilt 41 KOMPAS 3D V9 User manual Besides automatically established associative relations most component parameters are also defined automatically which eases the user from remembering or manually calculating those par
304. ng and the text portion of the BOM object You can read about attaching documents to a BOM item in the section JN attached documents In some columns for example Comment you will have to enter the data manually in any case If a BOM object contains geometry including the position reference number leader 228 KOMPAS 3D V9 User manual then the designation of the zone in which the start of the reference number leader is located will be automatically passed to the Zone column provided that the zone calculation was enabled when setting up the BOM style lf as a result of editing an assembly drawing the placement of position leaders included within the geometry of BOM objects has changed then when calculating positions new zone designations will be passed to the Zone column for those of them that now contain BOM item geometry Note Automatic zone calculation is unavailable if a reference leader is a part of macro element The Zone column is not filled when attaching a macro element containing a reference to BOM item And when including a reference which is a part of BOM item in macro element the Zone column cease refreshing To find out about including graphical objects from an assembly drawing into an item s BOM contents BOM item geometry refer to the BOM item geometry section We recommend using the semiautomatic data input in the text portion BOM objects whenever possible this will hel
305. ng the command To do this select new components and click the Detect Collisions button seo To exit the intersection check command click the Interrupt Command button Ion the Advanced Control Panel or close the Message window The mode of collision detection In this mode components moving is restricted by their shape and dimensions when moving a component with the mouse it moves only up to the point of contact with another component At the instant of the contact there is a sound alert and the contacting faces of the parts are highlighted in the model window Therefore in the collision detection mode the components cannot penetrate each other In most cases this helps avoid accidental packaging errors The button Enable Disable Component Collision Detection on the Advanced Control Panel serves as an indicator of that mode the pushed button means the Collision Detection mode is enabled the released that it is disabled Collision Control settings are done on the Settings tab of the Property bar Exploding assembly components sometimes one may need to view an assembly in a disassembled state so as to view all its components Before moving components apart you need to set up the exploding parameters 131 KOMPAS 3D V9 User manual select components and set the direction and amount of their relocation To specify exploding parameters call the command Service Explode Components Options Zl Using t
306. ng the data contained in the document for filling the text portion and additional columns of the object You can confirm the copying or reject it The connected document will be shown in the preview window If you do not need to view the document select the Preview Off option 215 KOMPAS 3D V9 User manual Ello disconnect a document from a BOM object click the Detach button aa you need to open a document connected to an object select its name in the list and click the Edit button If using the data from the connected document was confirmed then the name and the designation code are automatically passed into the respective columns of the BOM item object along with the designation of the format used to compose the document when connecting assembly drawing The information from a connected document can be passed not only into the columns of the BOM form but also into the additional columns For example a part s mass can be automatically passed to an additional column of the object lf several documents are connected to a BOM object then the data from the first of them is passed to the object t L You can change the order of the documents connected to an object by moving _ them around the list using the buttons Up and Down When a document is moved to the first position in the list the system will prompt to confirm using the data contained in it If you edit the connected document making changes to the data use
307. ng with the Property Bar fixing and releasing remembering etc After entering the new parameter values click the mouse on the object ghost or click the Create Object button on the Advanced Control Panel Text included in the object dimention text brace text text from designation of surface finish etc sometimes needs to be edited In this case it is useful to call dialog to enter text without editing the object Doble click at the text but not at the graphical entities of the object for this purpose The Text dialog will appear on the screen Make changes and close the dialog with OK button 2 KOMPAS 3D V9 User manual Object defining points handles Using defining points allows changing various object parameters dimensions position shape etc without using the keyboard just by moving points with the mouse Defining points handles are displayed as black squares Defining points handles of graphical objects appear when those objects are selected while the defining points handles of three dimensional objects at the time of their creation for editing The figure shows examples of various objects and the defining points handles which control those objects estrusion depth center inthe reverse direction location radius E text location extrusion depth In the foryvard direction dimension lire location snap points General steps of editing objects using defining points are as follow
308. ng with the drawing you can make some layers background For the convenience of displaying background layers on the screen the system provides capabilities to customize their appearance The style of drawing background layers is set up in the layer settings dialog There are two ways to call it v Call the command Service Layer Status or click the button Layer States on the Current Status bar The Document Manager dialog will be displayed Click the Layer Settings button on the Document Manager toolbar v Call the command Service Options System Graphic Editor Layers Choose a line type Solid Dashed or Dotted If the solid type is selected then you can set the line weight in the screen units pixels Note Lines of text strings and fills are always shown as solid To change the color of drawing background layers use the Color button The styles that will be used for drawing are shown in the preview panes to let you immediately watch the introduced changes Once the display settings are done click the OK button If the Layer Display Settings dialog was called from the Document Manager dialog close that dialog as well Note that setting up the display of background layers works only for the current drawing view If a view becomes active then all its visible objects are displayed in the color selected for that view If a view becomes background then all its visible objects are displayed in the style defined for
309. ngle or the complimentary angle v Flat Pattern Parameter A simple bend can also have such parameters as the width and depth of the release After calling any of the mentioned commands controls become available on the Property Bar for setting up various operations parameters including parameters of bends Initially those parameters use the values defined in the sheet body properties dialog for new parts If those are left unchanged then default variables will be assigned to the parameters In the future this will help quickly changing parameters of same type bends Eal After setting up operation parameters click the Create Object button on the Advanced Control Panel A new feature will be added to the sheet part being developed and the respective icon will appear in the Model Tree al Bend icon M Bend by Line Icon t o F Incision icon Note that bends produced by these features are displayed in the Model Tree as standalone objects You can create several components of the same type bends bends by line or incisions without exiting the command To create current element set its source object or objects if nessesary modify parameters of the operation and click the Create Object button Auto Do the following if you need to create several elements with identical parameters Click the Object Auto Create button on the Advanced Control Panel after you have created first object with correct parameters Then select sorce obj
310. ning an attribute to an object Once an attribute type is created you can assign this attribute to the document objects To assign an attribute do the following 1 Select an object or several objects by any convenient means to which you need to assign an attribute 2 Call the command Service Attributes The attribute management dialog will appear 3 If the selected object doesn t have any attributes yet then the list of the existing attributes is empty Click the New button to call the dialog in which you can select the new attribute type 4 Select the desired attribute type in the list and click the button Select A dialog window will appear in which you need to enter the new attribute value After input click the OK button 5 To exit the main attribute management dialog click the Exit button 169 KOMPAS 3D V9 User manual Viewing and editing attribute values The user can at any time view of the object attribute contents and if necessary edit To view an attribute value do the following 1 Select the desired object 2 Call the command Service Attributes The attribute management dialog will appear 3 Select the desired attribute name in the list of attributes possessed by the object 4 To view of attribute value click the View button or double click the left mouse button on the attribute name To proceed to editing a value you need to click the Edit button Both in the first and in the second
311. nnnnnnnnnnennnnnnnrnnnn 257 Modes of working witha lIDTary soesssienciioiseoiid ian E E 257 Changing the library Working MOdE cccccccccsececseeceeeeceeeesaeeeseueeseeecsuseeaeeceesaeeaeesas 258 Working with several libraries SIMUITANCOUSLY ccc ceccceecceeeeceeeeeeeeeeeeseeeseeeseeeeeeees 258 STAGING IDR ANY s cteuxccutavenicaseechaietele N eee 258 SING OWE Te CHINGlOGY sienetici tee ponrecatdel de atacon rasta cicen E E 260 Embedding KOMPAS document from an external fil ccc eccccceeeeeeeeeeeeeeseeeeeeeeees 260 Editing embedded KOMPAS dOcCume Db cccccccceeccceseeceeeceeeeeseeeeeseecesaeeseeseesaeess 260 Refreshing the link to the source fiIlC ec ceecccesceceeeeesseeceeeceaeeceeeseecaeeaeeseeseeaeesaes 261 Deleting an embedded KOMPAS dOCumMmenh c ccccsecccesceceeeeceseeseeeeceeeaeeeeeseeesees 261 MOONE EDO i eemenee ner rn tere Seem rtire testy fener ent eo ne ee ee ee an ee re 262 Data exchange with other SYSteMs cccccccececececeeeceeeceeeceeeesseecseesaueeeueecseesaeesaeeeas 262 VANO CODA TONIMIAUS oein NTE S scaues 263 KOMPAS 3D V9 User manual Welcome ASCON Corporation thanks you for purchasing KOMPAS 3D V9 system and hopes you will find it a reliable and trustworthy partner in your daily work that will significantly expand the scope of tasks addressed with CAD at your enterprise The main task solved by the KOMPAS 3D V9 system is modeling product
312. ns to define all its parameters When developing models and drawings using KOMPAS 3D all parameters of the created objects are displayed on the Property Bar Humerical parameters MoOn NUmerical parameters He E a Centerpoint Oo 0 0 rp 90 0 o o C Radius 30 0 Axes OB Style en ie ah ee ft Fined parameter Active parameter AUA parameter Parameters can be distinguished as numerical point coordinates length angle number of vertices etc and non numerical line style presence of symmetry etc A switch is provided next to the labels of most numerical parameters on the Property Bar that has an indicator corresponding to the parameter state Fixed Active m Auxiliary Unlike non numerical object parameters that allow definition solely by selecting the desired choice in the Property Bar there are several ways to define numerical parameters v The first most simple and obvious method of defining parameters is selecting desired points in the document window This method can be applied mostly to graphical objects since among three dimensional objects there are too few whose parameters can be defined by specifying just points v The second method entering parameters in a predefined order allows more flexible control over object parameters This method is available when creating most of objects both graphical and three dimensional v The third method is defining parameter values on the Property Bar
313. nside option v Select an option for interpreting the angle and define the angle value in the Angle field v Choose a bend radius type and enter the radius value in the Bend Radius field v Choose the method of bending and enter the offset amount in the respective field v Select the method of defining flat pattern length v Select the desired bend state using the option Unbend v When creating a bend you can control parameters of lateral sides of the bend using control items located on the Lateral sides tab v Using control items located on the Release tab you can define bend release and angle parameters The direction radius angle and other bend parameters can be set by defining points Bend by Line command Serves to create a straight line bend in a part with respect to some face of the part The selected line and face will be considered the bend line and the base face of the bend Any straight object can serve as a bend line v Sketched line segment v Polyline segment v Auxiliary axis 61 KOMPAS 3D V9 User manual v Straight edge of a geometry creating feature or surface Bend line requirements v The bend line must lie in the plane of the base face v The bend line must have at least one common point with the base face Note An auxiliary axis appears in the model as a straight line segment Nevertheless the axis Is an infinite line Therefore when selecting an axis as the bend line it doesn t mat
314. nsions specifications etc Arbitrary View ee To create an arbitrary model view in the current drawing call the command Insert Model View Arbitrary or click the Arbitrary View button on the Associated Views toolbar After calling the command the standard file open dialog will appear Select the model to create views and open the file The ghost of the image will appear in the drawing window in the form of an outline box By default the system offers creating the front view The Property Bar will display controls for setting up parameters of the views being 190 KOMPAS 3D V9 User manual created After setting up parameters of a new view specify its anchor point position A new view will be inserted in the current drawing and an icon of the created view and its name will appear in the drawing s Design Tree it View icon in the Design Tree Projection View To create a model s projection view in the current drawing call the command Insert Model View Projection View or click the Projection View button on the Associated Views toolbar In the drawing window specify a reference view to create a projection view Then start moving the cursor it will turn into a coordinate system image in the direction corresponding to the view to be created For example to get the Right view you need to move the cursor left to right for the Top view move it top down etc eight ghost of the image will app
315. nto the account the position of the flattened part Note A sheet part is displayed on cut or section views and enlarged details in the same state as on the base view When a part state is changed on that view flattening being turned on or off the cuts Sections and enlarged details are rebuilt automatically Part material removal Removing part material is cutting out features from bodies The cut elements can be of the following types Extrusion features Revolved features Swept features Loft features Cutting a geometry producing feature begins with creating its sketch Creating sketch User s library of sketches After the sketch is finished specify the method to sweep the sketch in the space to obtain an element of the desired type that is select the geometry producing feature type The rules of constructing these features are similar to the rules of constructing the respective features when adding part material The difference between material removal operations and the addition operations is in that the result of removal is subtraction or intersection rather than creation of a new body or a union of bodies Subtracting a geometry producing feature from a body means removing the material surrounded by the feature surface Intersection of a geometry producing feature and a body means removing the material outside the feature surface To cut geometry producing features from a part you can use commands from the group
316. nts for collision you need to specify the components to check Once an object was selected by any available means its respective icon in the Model Tree turns from blue to red For example when selecting a face the icon of the operation that produced the face will change the color and when selecting a sketch the icon of the sketch will change the color Depending on the command being performed you may need to select and or specify objects in the model editing window or in the Model Tree for most commands it doesn t matter where the object was specified the user judges what is convenient v Selecting Items in Model Tree v Selecting Objects in Model window The system has provisions simplifying the process of selecting the desired objects For example the selected hidden and densely placed objects there is the Object Picking Over command etc Object Filters When selecting or specifying vertices edges faces axes and planes in the model editing window objects are dynamically traced as the cursor is passing over an object that can be selected at this moment that object is highlighted and the cursor changes its appearance sometimes several objects get into the cursor s catcher at once for example a face and its edge and the highlighted object is not the one that you need to select To help selecting objects of the desired type there are object filters 29 KOMPAS 3D V9 User manual To go to the Filters bar
317. nts of the objects which were used as the base for constructing that plane Sometimes to better understand a plane location you may want the plane rendering rectangle to be larger smaller or be located at another part of the plane You can change the size and position of this rectangle by dragging its defining points handles with the mouse those appear when the plane is selected Split Line command Serves to divide a face faces of a part into several faces A face faces are split by the intersection line of this face faces with the surface swept by the selected sketch when moved in the direction perpendicular to its plane The face splitting command is available only when building parts Before calling the command select the sketch of the split line zo call the command click the Split Line button on the Construction Geometry toolbar or pick it by the name from the Operations menu Select the part faces to be split Selected faces are highlighted If you selected a wrong face select it again The face will be deselected and not involved in the operation fs The Projection Direction radio group serves to define the direction of 1I sweeping the selected sketch forward reversed or both directions o confirm splitting selected faces click the Create Object button on the Advanced Control Panel ero cancel face splitting click the Interrupt Command button on the Advanced Control Panel or th
318. number by the second axis instance numbers start from 1 In the case of a circular pattern a pattern instance ID is made of two numbers the first one is an instance s ID number along the radial direction the second the instance s ID along the circumferential direction instances are enumerated starting from 1 If instances are placed by a path then an instance s ID is counted in the order the elements are positioned starting from the source one Since any pattern instance is a group of copies of the source components the components of a pattern instance that are placed on the branches of the Model Tree correspond to the source one An ID number is displayed to the right of a component copy in parentheses Editing any copy belonging to any instance is the same as editing the respective source component A component copy can be edited in a window or in place To do this select the copy icon in the Model Tree and pick the appropriate context menu command for editing 95 KOMPAS 3D V9 User manual Auxiliary components Construction axes To perform an operation of creating auxiliary construction axes you can use commands from the group Operations Axis The buttons for calling those commands are located on the Construction Geometry toolbar A Axis through Two Vertices a Axis on Plane Intersection Al Axis of Conical Surface E Axis through Edge The axes created by these commands appear in the Model window as line
319. o use only in such cases of BOM preparation which cannot be handled by entering main objects For example an auxiliary BOM item object allows to enter an arbitrary text comment into a BOM table or create an empty line in the middle of a section 212 KOMPAS 3D V9 User manual BOM object contents A BOM main item consists of v text portion v Geometry graphical objects v auxiliary parameters An auxiliary BOM object does not contain geometry and has few advanced parameters then a main one Text portion of a BOM object The text portion of a BOM item object is the data entered in the columns of a BOM table The input and editing mode of the text portion has practically no differences from the text mode in KOMPAS 3D The text portion of some objects can be created by filling templates The template is usually used to fill designations and names of standard items and materials BOM Item Geometry A BOM item can contain information about graphical elements of an assembly drawing that make up its image or about components of an assembly connected to a BOM This information is called BOM item geometry For example when creating a BOM item object Shaft it s geometry contents were defined as the line segments patches and other elements depicting the shaft in the assembly drawing connected to the BOM After that in a BOM you can enable the mode of showing BOM objects geometry in this mode the system automatically i
320. object is deselected its defining points handles also disappear Deleting Drawing Objects Besides the commands for creating and editing objects KOMPAS 3D provides a set of deletion commands You can delete either individual objects or any combinations thereof Be careful when selecting and then deleting macro elements groups inserted fragments and other complex objects The entities that belong to a complex object being deleted may not be visible in the current display mode for example some of them can be on hidden layers Therefore you can accidentally delete something not intended If you made a mistake when deleting use the undo command and restore the previous document state 6 To do this select the Undo command in the Edit menu or press the keys lt Alt gt _ lt BackSpace gt or lt Ctrl gt lt Z gt or else click the Undo button on the Standard toolbar 157 KOMPAS 3D V9 User manual Styles of drawing objects To make the information in drafted graphical documents easy to read and understand lines of various thickness and color are used along with different hatch types character properties and so on A style is a set of object properties affecting its display For example a point style includes the appearance of the symbol used to draw the point along with a color You can use ready made themes of system styles to produce decided drawing layouts Additionally you can create your own styles and use those wh
321. objects in the objects connected to it assembly drawings and assembly models If the system finds a mismatch between the parameters of the same object ina BOM and in a connected document or a mismatch in the contents of BOM objects in the documents the respective warning is displayed It contains the information about the kind of the mismatch for example the text portion of an object differs ina BOM and ina drawing or an object exists in a drawing but is missing in a BOM and the buttons serving to select an option for fixing the mismatch The particular options of fixing mismatches are described in detail in the interactive help to warning dialogs The general principles of the automatic synchronization are as follows v Synchronization is done even when data transfer from a drawing into a BOM is temporarily disabled in the BOM setup v The user can choose a method of fixing a mismatch for each specific BOM object v The user can choose a common method of fixing a mismatch for all mismatching objects transfer all objects from a drawing into a BOM or from a BOM into a drawing 238 KOMPAS 3D V9 User manual You can read details about exchanging objects between documents upon the user s command in the sections Transferring objects from a drawing into a BOM and Transferring objects from a BOM into a drawing Templates to Fill Text of BOM items objects Use filling templates to automate text input and sorting by standa
322. ocation of the added object in the Model Tree v To exclude an object from a macro element expand its contents to do this have the macro element contents display enabled Drag amp drop the object icon in the Tree outside the Macro element _I When the cursor shape changes drop the object It will be excluded from the macro object and appear in a Model Tree location where it was residing before being included into the macro object ol To move an object from a macro element into a specific position in the Model Tree drag the object to that position When the cursor turns to an arrow drop the object If the cursor doesn t turn into an arrow that means the moved object cannot be placed in the specified position within the model object hierarchy Note The base planes and the coordinate system origin cannot be included into a macro element or excluded from it by the mouse To do this you need to use the commands Group into Macro Element and Explode Macroelement respectively You can also move objects across macro elements by the mouse Exploding a macro element Exploding a macro element is the reverse operation to its creation After exploding a macro element its icon is deleted from the Model Tree and its member elements returned to their places Note The macro elements that were members of the exploded one are preserved To explode a macro element macro elements select it and call the command Explode from the context
323. ocessing of those bends upon the table deletion 57 KOMPAS 3D V9 User manual Sheet body command Serves to create a sheet body It is created by extruding a sketch in the direction perpendicular to its plane Before creating a sheet body you need to create a sketch in the part which will define the body shape The sketch must satisfy certain requirements The command Sheet Body is available if at least one sketch is selected After calling the command enter the sheet body parameters using interface items on the Property Bar These parameters will be different for a sheet body with a closed versus an open sketch Sheet body parameters can also be set using the defining points gi When the construction is completed a sheet body will appear with the specified parameters in the Model window while the sheet body icon in the Model Tree After creating a sheet body a certain set of variables is generated in the part Creating a sheet body with a closed sketch To create a sheet body with a closed sketch you need to define its following parameters v Sketch Extrusion Direction The forward direction is shown by the arrow in the Model window The Direction radio group serves to switch the direction Example of specifying extrusion direction for a closed sketch v Sheet body thickness In fact the thickness is the distance of extruding the sketch v Methods of defining flat pattern length of a bend Upon en
324. ociated Views toolbar Note Breaks in the images are not possible in a system view Two parallel lines will appear on the screen the boundaries of the break while on the Property Bar the control items to set up the break parameters The Break line bar contains the list of break lines existing in the current view A break corresponding to the selected break line is considered the current one For the current break you can set up the angle gap and line type The Angle field serves to define the angle between the X axis of the current view coordinate system and the direction of shifting the current break 193 KOMPAS 3D V9 User manual A type of break lines can be selected from the same name the list on the Property Bar The following choices are available Bent Straight None Waves For a waves line and a bent break line you can enter the maximum setback value in the same name field The Gap field serves to define the distance at which the shown portions of the image will be after creating a break Note When using bent break lines the gap should be not less then the doubled setback amount The minimum gap when using lines of other types is 1 millimeter By moving the defining points of the break boundary with the mouse surround the portion of the image to be deleted i The Add button serves to create a new break line in a view After clicking it a lnew pair of break boundaries will appear on the scr
325. ocument In other words excluding elements from calculations is equal to a temporary deletion from the model Therefore by moving the Marker you can temporary delete from the model several last elements You can quickly move Marker to end of Model Tree To do this use the command Rollback Bar to End from the context menu accessed on the Marker After calling the command all model elements become included into the calculation unless explicitly excluded The model will be rebiult to account for the included elements While working with a model you are not in any way limited to move the End of construction marker The icons of the newly created elements will be positioned in the Model Tree before the Rollback Bar This property of the End of Model Design rollback marker and that the excluded from calculations elements are not displayed on the screen and cannot be used in constructions is convenient to use when modifying the order of building the model For example to edit a part obtained by the operation of mirror copying you need to make changes to that its half which is the original by positioning them before the mirror copy operation However firstly both halves look completely identical and secondly when editing you can accidentally use the elements of that part s half which was created by the copy which will inevitably cause an error In such cases it could be helpful to move the End of Model Design rollback marker so t
326. ocument in KOMPAS 3D A drawing contains a graphic image of the part a title block a format frame sometimes additional notations an Unspecified Surface Finish symbol technical requirements etc AKOMPAS 3D drawing may contain one or several sheets For each sheet you can specify the format multiplicity orientation and other properties AKOMPAS 3D drawing file can contain not only drawings per the applicable drafting standards but also schemes diagrams and the graphic documents A drawing file has the cdw extension Fragment an auxiliary type of a graphic document in KOMPAS 3D A fragment differs from a drawing by the absence of the format frame the title block and other layout attributes of a design document It is used for storing images that do not have to be laid out as a separate page sketched drafts prototypes etc Additionally fragments store typical solutions that can be reused in other documents A fragment file has the frw extension Parts List a document containing information about assembly contents and is laid out as a table Parts List is attributed with a format frame and title block It is often multi page A Parts List file has the spw extension Text document a document containing mostly text information a text document A text document is attributed with a format frame and title block It is often multi page A text document allows creation of explanation notes notifications technical
327. of the column cells with a particular entry in the title block of a document connected to the object 223 KOMPAS 3D V9 User manual If using blocks of nested sections is enabled then you can specify whether to show block titles in the BOM The list of blocks is created by the user The following is specified for each block v name v Number v Whether is used or not By default v Block display method from a new sheet or arbitrary v List of sections 5 Blocks of variants This group of settings serves to define the rules of creating and displaying the variant numbers whether the product being billed or BOM objects In it you can v Toggle on or off the display of the variant block titles v Select the block display method from a new sheet or arbitrary v Toggle on or off adding zeros and or dashes before an ID number of a product variant v Select the method of displaying BOM objects by blocks for each object separately if the number of product variants exceeds the number of columns to record the quantity per a variant v Specify how the variant object designations should be shown fully or by a variant number only v Specify whether the reference position numbers of the variant objects should ascend 5 Blocks of Additional Sections You can toggle on or off using in a BOM blocks of additional sections If using blocks of additional sections is enabled then you can specify whether to show block t
328. of this group is enabled those are stored in the file prj Working window settings Main system window appearance preferences Main Window Size Interface settings made in the same name dialog Application Look Status of open documents window size and position cursor s step scale local snap settings grid scroll bars Location and composition of the menu bar and toolbars including the user defined ones Position and size Property Bars Variable Management window Information window Text Templates Librarian window Library windows Document Manager and Layer Filter Settings dialog of the Library Manager Library Manager structure Each library status connected or detached If saving the settings of this group is enabled those are stored in the file dsk Note This file does not store the information about the contents of the View and Current Status bars in the following modes when editing a local fragment 13 KOMPAS 3D V9 User manual editing specifications editing BOM objects in a graphics document Changes to the content of the said bars are maintained in these modes only through the end of the working session Managing each loop saving is done in the configuration saving parameters dialog Existing configuration settings can be saved in a profile file Using this profile later will allow quickly changing the current setting to the one
329. oint field will change To confirm the Control Point creation click the Create Object button on the ___JAdvanced Control Panel fag the icon of the control point will appear in the Model Tree The Control Point I command stays active The system waits for the next control point input o finish an input session of control points click the Interrupt Command button or the lt Esc gt key Attachment Point command Serves to create attachment points in a model galo call the command click the Attachment Point button on the Construction Geometry toolbar or pick it by the name from the Operations menu Specify a model anchor point which will be the attachment point The vertex name will be displayed in a field of the Objects group Select reference object to define the overall vector direction in the attachment point The reference object name will appear in a field of the Objects group eil Ea To define a particular vector direction activate one of the switches in the Direction group The attachment point is displayed as a ghost You can define the attachment point name and color on the Properties tab of the Property bar If another vertex or reference object is picked by the cursor then the ghost position of the control point and the vector direction will change accordingly The contents of the fields in the Objects group will change as well a To confirm the Attachment Point creation click the Create Obj
330. oints with the View Hide All auxiliary objects command Vv Giilswitch off the Dimmed Wireframe display 4 Disable the display of components that are not worked on using the Hide command accessed in the context menu of those components in the Model Tree 5 To quickly restore frequently used model orientations save those as user orientations 133 KOMPAS 3D V9 User manual Creating graphical documents General informations Sheets views and layers in graphics documents KOMPAS 3D has two types of graphics documents main the drawing and auxiliary the fragment A drawing may consist of several sheets Also regardless of the number of sheets it is saved in one file By default a newly created drawing contains one sheet The sheets are in no way related to the image stored in the drawing Simplifying those can be considerate lying on a special layer located above the rest of graphical objects Therefore when deleting a sheet the image that was beneath it stays in its original position while the frame around it and the respective title block View is an inherent part of a drawing which serves as a container for the objects geometry designations texts etc and also these objects themselves Whole image in the view can be scaled moved and rotated as one object This view property make it a convenient tool of packaging therefore each drawing image view cut etc should preferably be placed on a separate view
331. ollowing sections v Global snaps v Local snaps Snapping can also be done from the keyboard KOMPAS 3D V9 User manual Selecting and deselecting objects While working with KOMPAS documents the user performs various operations with objects edits copies moves rotates them and so on Practically all three dimensional object creation commands allow selecting objects used in the operation either before or after calling the command Some commands for geometry and three dimensional body creation are designed to work so that after starting them you need to first select objects and then actually start performing the operation with those objects For example this is exactly how deformations and area deletions work Most of geometry creation commands necessarily require objects selection before they are launched For example the copy and rotate operations affect exactly those objects that were selected before calling the command Text formatting commands can be used with a selection in this case formatting will be applied to the selected text or without a selection in this case the newly typed text will be formatted KOMPAS 3D offers the user a variety of capabilities to select objects and correspondingly deselect either by a mouse or by menu commands To de highlight simply click the mouse over any free space in the window Using the grid As you work with a graphics document or with an operation sketch it is ofte
332. on the Property bar to edit parameters of any LCS in thedocument 2 Select the LCS name in the list K Click the Delete Local CS button The name of the deleted LCS will disappear from rn ist 4 To finish working with local CS s click the Interrupt Command button on the Advanced Control Panel or once again click the Local CS button on the Current Status toolbar Link Operation A link is a text which is associatively related with some other object containing a text The object type with the link is called the link source When using the same source the link s contents may be different The set of link contents choices depends on the source type Due to the presence of an associative relation between the link and the source the link contents is automatically updated when the source is changed Links can be included in the following text objects v Specifications v Drawing Annotation v Table cells in a drawing v Textin designation symbols The following objects can be sources v layout ibjects datum symbols view direction arrows reference numbers etc v Drawing Annotation v View 165 KOMPAS 3D V9 User manual v Specifications item For example a marking symbol may contain a link to a specifications item number that defines the method and font to use for marking If the item number is changed as a result of deleting or hiding items before it the link will be updated Due to this the marking symbol
333. ond to the interface items on the current Property Bar tab Example To modify some parameter value you need to activate its respective Defining Point and move it To activate the point move the mouse cursor to it Once the point is selected and a label appears next to it with the parameter name and value press the left mouse button Drag the mouse while holding the button down The selected defining point will follow the cursor with the respective parameter value adjusting appropriately The object s ghost 36 KOMPAS 3D V9 User manual will be updating dynamically Once the desired value is reached release the mouse button some defining points may control several parameters simultaneously For example an extrusion s side wall draft can be inward or outward When dragging an Angle defining point from the zero position inward of the body the Draft Inside switch activates when dragging it outward the Draft Outside switch and the current angle value is displayed in the Angle field It is more convenient to control a changing numerical parameter value while dragging a defining point when in the Rounding value approximation mode 2 To activate this mode click the Rounding button on the Current Status bar When in the Rounding mode the parameter corresponding to the moved defining point can only take such discrete values that are multiple of the current cursor step The cursor s current step is shown in the same name
334. ons To do this double click the filter icon and make the required changes in the appearing Layers Filter dialog A filter can be turned into a group 4 by delete a filter activate it in the Tree of Sheets Views and Layers and click the Delete button Using Filters Using filters is similar to using a group of layers Upon activating a filter the layers will appear on the screen whose properties satisfy the filtering conditions Using the buttons on the toolbar you can define the property of being active visibility and color of all filtered elements simultaneously Using interface items in the fields of the List of Sheets Views and Layers you can modify its properties individually Note If the properties of a filtered group or is individual element are modified so that they no longer satisfy the filtering conditions then those objects will be deleted from the filter How to work with graphical editor Moving objects by the mouse You can move drawing or fragment objects by the mouse avoiding the menu commands To move items by mouse complete the following steps 1 Select the objects to move 2 Position the cursor so that its catcher was grabbing any of selected elements and press the left mouse button Then drag the objects to the desired location by holding the mouse button down The ghost of the moved objects is displayed Once the desired objects placement is reached release the mouse button Objects will be
335. ons tab you can specify another section of the feature and if necessary specify an axis change the construction methods near the outer sections and the path parameters v You can also edit the thin wall parameters also enable or disable its creation on the Thin Wall tab v On the Operation Result tab you can modify the operation result and or its applicability range Changes to the set of the source elements and other parameters are promptly propagated into the Part window in the way of the ghost feature with updated properties T confirm the changes click the Create Object button on the Advanced Control IPanel to reject them the Interrupt Command button Chamfer and fillet When editing a chamfer or round you can change the values of quantitative and qualitative parameters which were defining that chamfer or fillet at creation and assign different edges but you cannot change the element type For example a chamfer cannot be converted to a fillet and vice versa After calling the command the Property Bar displays the same controls as those used when creating this object and the source edges are highlighted in the Part window You can specify other edges for creating a chamfer fillet To do this deselect the previously picked edges faces and select the new edges faces If you need to de highlight all previously selected edges and faces click the mouse 117 KOMPAS 3D V9 User manual on a blank s
336. ontain not necessarily a drawing proper but a diagram a poster so a BOM document the file spw may contain a schedule listing etc The variety of parameters and settings especially the capability to use the user defined form allows creating not only a BOM per GOST The mechanisms of the BOM design system fit to work with various schedules listings catalogs and lists In a general case a BOM document is a table in which a heterogeneous information is entered line by line where a special place is assigned for holding each kind of data a column in the form an additional column The resulting lines can be numbered sorted related with documents and graphical objects etc Creating a user BOM style A KOMPAS SD installation is shipped with BOM styles that support the creation of a simple BOM per GOST 2 108 68 and a group BOM per GOST 2 113 75 To create a BOM that will be laid out and filled according to different rules for example per a company standard you need to assign this BOM style containing all desired parameters and settings A detailed description of parameters and settings that can be customized when creating a user BOM style is described in detail in the section Components of a BOM style How to create a user BOM style including the rules of creating a BOM form is described in a separate part of this Manual included in the KOMPAS 3D BOM design system distribution A We would like to note that usually a new B
337. or from a BOM into a drawing such transfer being associative For example as a result of changing the drawing scale or the image position some positions appeared in the wrong zones on a drawing To fix the consequences of such a situation one would have to review all position reference number leaders check in what zone they are located and if necessary correct zone designations ina BOM A KOMPAS 3D BOM will automatically do all these actions the user just needs to call the command of sitting position reference numbers The zone designations in which the positions are currently located will be automatically sent into a BOM and will be placed in its Zone column in the line of the respective position If as a result of sorting objects in a BOM position reference numbers changed then the new numbers can be automatically communicated to appear on the shelves of the respective position leaders in a drawing Therefore the changes made in one document are passed into the uniquely defined respective place in another document Due to having an assembly drawing and a BOM connected to each other it is possible to synchronize data passing BOM objects from a drawing into a BOM or from a BOM to a drawing You can read about this in the sections Transferring objects from a drawing into a BOM and Transferring objects from a BOM into a drawing An additional provision is automatic transfer of the designation code in name between the BOM s
338. osition is defined by the user A sketch is drafted on a plane by using standard tools of the drafting graphical editor KOMPAS 3D In this mode you can use any commands for creating and editing a draft parameterization commands and various utilities An exception is you cannot enter some process annotations layout objects and tables Note The way of sketching such geometrical objects as rectangles polygons and polylines is none different from the way of creating the respective objects in a graphical document However such construction does not produce the respective objects in their entirety rather those are sets of line segments that make up the created rectangles polygons or polylines Sketch can contain text When exiting the sketch mode all its texts are converted to one or several contours made of NURBS nonuniform rational B spline You can import a draft into a sketch from a prepared in advance drawing or fragment This helps rely on existing drafting design documentation when creating a three dimensional model Note You can insert external fragments into the sketch as well as macro elements from libraries for example from the Designer s Library or from the Design Elements Library To be able to use the inserted image in an operation you need to explode it after the insertion 38 KOMPAS 3D V9 User manual Operations A new part design starts from creating a base by inserting into the file a ready part mod
339. ould be deleted from the part Since this mate became in valid its icon is exclamation marked Error messages When working with a part model rebiuld may be required if the order of creating the part was changed or so were the values of variables Upon calling the command the parts is rebuilt according to a new parameter values or the new creation order Advanced techniques Managing Element Display Each individual face can be assigned surface properties color degree of shininess etc different from the overall part surface settings To change the color or other face properties select the face in the Part window and call the context menu command Face Properties The Property Bar will display controls for setting up face properties If a face has the same color as the entire part then the Use Source Color option is enabled in the dialog To change the color disable this option The Color drop down list and the Optical Properties pane will become accessible in the dialog The latter contains several sliders to control surface optical properties You can select any of the colors available in the list to set the face display You can change surface optical properties Shininess Specularity Diffuse etc by moving the sliders or by entering percentage of values in the respective fields A sphere with the surface properties specified in the dialog is displayed in the preview window this helps visually examine the changes introdu
340. ouse button v Moving Defining Point by Keyboard Activate the defining point by the keyboard Now the point will move together with the cursor Move it by the arrow keys and when the point reaches the desired position press the lt Enter gt key to fix its new position Note that in this method the defining point will move in increments equal to the current cursor s step v Moving Defining Point with Snapping Firstly when dragging a defining point 156 KOMPAS 3D V9 User manual by the cursor either by the mouse or by the keyboard the currently enabled global Snaps will work secondly when dragging a point you can use Local References Thirdly when dragging a point you can use key snaps v Defining handle coordinates Activate the defining point by the keyboard Answer the new values of the selected point coordinates in the court in its field of the Current Status bar and fix those by pressing the lt Enter gt key After that the selected defining point will assume the specified position When editing defining point position they describe methods of activating and moving the defining point can be combined For example activate the point with the mouse but move and takes it by the keyboard Alternatively activate the point by the keyboard make a Local Reference and fix the new position by the mouse To clear object highlighting after editing its defining points click the mouse outside this object s image When an
341. ow of the Manager The created library will appear in the Manager s list of libraries This library is not attached yet 4 To connect created library select it and call from the shortcut menu theAttach command A tab will appear in the Library Manager window that corresponds to the library you have created This tab is empty as again created library yet does not contain fragments 5 Generate structure of library by means of the Create section command from the shortcut menu of a tab 6 Include fragments in sections This can be completed by two methods v To place in library ready fragments v To create fragments directly in library Note Graphics objects created in a fragment can be parametrical If fragments are created in the library with the purpose of used as sketches in the system of three dimensional solid modeling those should satisfy the requirements to sketches for particular operations If there are ready fragments which will be stored in library fulfill following operations 1 Call the context menu command Add Description Fragment to Library 2 In the appeared dialogue specify a folder and a filename files frw for inclusion in library 3 In the appeared dialogue for setting the name of a fragment set default name complete or relative or enter any name of a fragment fragments in library The selected fragments will be placed in current section of library under the set names If ready fragments are not pr
342. owed values you will be able to select only 0 3 0 35 0 4 The list of allowed by the use is stored in the attribute type Working with attributes To work with attributes proper there is a dialog within which you can create a new attribute and a new attribute type where the attribute type can be stored either in a drawing or in special libraries on the disk In the dialog you will also be able to view edit or delete attributes of a drawing object copy or cut them to a clipboard to create similar attributes within other objects as well as to add an attribute from the clipboard to the selected object To work with attribute types there is another dialog within which you can create a new attribute type in a drawing or in a library edit or delete an existing one restore or destroy a deleted type copy and move types from a drawing into libraries and between libraries as well as create new libraries on disk To select objects on a drawing with the same attribute types or values there is a dialog in which you can create a set of the necessary types from the document in various libraries which will be used to run the search Attributes and the Clipboard If objects which are copied or moved via the clipboard have attributes then the following happens When objects are copied to the clipboard the attributes are copied along Upon the oncoming pasting from the clipboard such pastings can be multiple then for each new instance of the
343. p Note that you cannot change properties of the current layer The group of layers may contain no current layers The maximum number of current layers equals the number of views to which the layers contained in a group belong For example if a group contains layers from View 1 and from View 2 then it can have two current layers So a group of layers subordinate to a view and also any group of fragment layers may contain only one current layer To make the introduced changes of group elements effective click the button Apply In this case the Document Manager will stay on the screen If you click the OK button then the settings will be applied to the layers in the group and the Document Manager will close To close this dialog without applying the introduced settings click the Cancel button Assigning Layer Properties Groups Using groups of layer properties helps simultaneously modify the properties of several layers In this case the values of such properties for the layers included in the group can be different For example the following groups of layer properties were created for one of the views in a floor by floor plan drawing v Office Building View 1 v Plan at the level 0 000 Group 1 v Architectural solutions Subgroup 1 1 v Technological Equipment Subgroup 1 2 v Ventilation and hosing Subgroup 1 3 v Plan at the level 3 300 Group 2 v Architectural solutions Subgroup 2 1 v Technological Equipment Subgro
344. p avoid numerous errors when creating a BOM The normal mode of filling the BOM When creating and filling in the text portion of objects in a BOM document what you see on the screen is a standard BOM table and you enter data in its entries This working mode is called the normal mode of filling a BOM It is similar to the normal mode of filling a text document In this mode you can also edit additional parameters of BOM objects The title block of a BOM document is not shown in the normal mode and is not available for editing To fill in the title block you need to go into the print layout mode By default the system is in the normal mode To return to the normal mode from the print layout mode you need to click the Normal Mode button on the View bar or call the respective command from the View menu Print layout mode The print layout mode used for working working with a BOM is similar to the print layout mode of a text document To go into the print layout mode click the button Print Layout on the View toolbar or pick it by the name from the View menu In this mode the BOM pages are shown just like they will be printed out The title block tables of a BOM document are displayed and accessible for editing BOM objects are not accessible for editing in the print layout mode To edit objects go into the normal mode 229 KOMPAS 3D V9 User manual Relation between an Assembly or Drawing and a BOM In a designe
345. pace in the Part window You can change the fillet radius or chamfer parameters side lengths angle direction sr To confirm the changes click the Create Object button on the Advanced Control __ Panel to reject them the Interrupt Command button Rib When editing a rib you can change the values of quantitative and qualitative parameters which were defining that rib at creation and assign different source faces After calling the command the Property Bar displays the same controls as those used when creating this object You can change the direction of creation and the position of a rib with respect to its sketch plane provided that the part configuration permits You can change the draft angle of side faces of the rib and if its sketch consists of several segments then you can reassign the segment defining the draft angle You can also change the material adding direction and the width of the rib Parameter changes are propagated in the Model window in the way of the ghost feature with updated parameters Ger To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command button Draft When editing a draft you can change the values of quantitative and qualitative parameters which were defining that draft at creation and assign different source faces After calling the command the Property Bar displays the same controls as those used when c
346. pages when 252 KOMPAS 3D V9 User manual printing do the following steps FH 1 Click the button Print Skip Sheets on the Control bar or call the respective command from the Service menu The system then goes into the mode of selecting pages in the printable area the indication of this selection mode is the appearance of the button Print Skip Sheets staying pushed In this mode no actions are taken regarding documents layout 2 Click the button on the page that needs to be banned from printing At the same time the color in which the selected page is displayed on the screen will be changed A repeated focusing of the cursor on the previously marked page cancels the ban on its printing 3 To quit the mode of selecting pages release the button Print Skip Sheets Printing several documents simultaneously KOMPAS 3D allows printing of not only one active document but also of several different documents The functionality of simultaneous positioning and printing helps save the overall time used for printing documents and use paper more efficiently To print several documents complete the following steps 1 Start KOMPAS 3D and open all documents to print 2 Call the command File Print Preview or click the respective button on the Lk Standard toolbar The dialog will appear for selecting documents to print The active document is selected in the list Activate the Select All Documents option and click the OK
347. parametric relations between them A mate is a parametric relation between assembly components created by defining the relative situation of its elements for example parallel faces or coincident vertices KOMPAS 3D supports mates of the following types v Parallelity of elements v Perpendicularity of elements v Placing Elements at Specified Distance v Placing Elements at Specified Angle v Tangency between elements v Coaxial elements v Coincident elements The commands for applying mates are located in the group of commands Operations Component Mates _ The quick access command buttons are located on the Mates toolbar Parallel pa Perpendicular At Distance At Angle Oe Tangency Coaxial E Coincident Assembly Features It is possible to perform geometry producing operations in an assembly imitating processing operations on an assembled product For example one can create a hole going through all components of an assembly or trim a portion of an assembly by a plane All geometry producing operations available in the assembly mode work to remove material The steps of performing those operations are practically the same as when modeling a part Additionally when performing geometry producing operations in an assembly you can define the application range for an operation The respective command buttons are located on the Edit Assembly toolbar o Cut Extrude 93 KOMPAS 3D V9 User manual
348. ple bodies the case of a multibody part Each body is created in a usual way in the multibody modeling process meaning by performing a Boolean operations with 3D elements Boolean operations can also be performed with bodies Multibody modeling expands the capabilities of constructing parts and lifts the limitation on creating models that can be obtained solely by uniting subtracting or intersecting bodies For example by using multibody modeling one can construct a part as a union of thin wall bodies with different wall thickness Various aspects of working with multibody parts are reviewed in the following sections Examples of multibody modelling The applicability range of material adding and removing operations Specifics of working with multiboby parts Specifics of working with part editing commands due to the presence of multiple bodies in the part Examples of using multibody modeling Among most typical examples of using multibody modeling are the design approach from multiple directions and creating bodies by subtraction 81 KOMPAS 3D V9 User manual The design from multiple directions is a design method in which isolated pieces of a part are created as stand alone bodies and are then united merged In this way the intersecting bodies can be united by performing a Boolean operation with them whereas the non intersecting ones by constructing a new body that intersects them Creating bodies by subtraction
349. ponding to necessary variables or in the Expression field of the dialog to set the dimension value Inequations are not allowed There is special workspace which is intended for entering equations and inequations at the bottom of the window of working with variables and the dialog to set dimension value does not contain the Expression field When editing any graphic object its existing parametric relations and constraints should not be violated Therefore when editing one object other objects are automatically rebuilt in order to maintain the relations and constraints At the same time it is absolutely irrelevant in what order the objects were created or 199 KOMPAS 3D V9 User manual by what means the relations and constraints were applied automatically or by a dedicated command any object can pull any other objects created whether before or after it Note that any sketch can be made nonparametric by destroying or not creating any relations and constraints Element hierarchy Besides the Model Tree reflecting the part creation history KOMPAS 3D remembers the hierarchy of the model elements By the hierarchy we mean the order of dependencies between the model elements An element is regarded dependent on another element if any items or properties of that other element were used for its creation For example the sketch is built on a face of an extrusion feature then the sketch is dependent on that feature A
350. position of the fields in this dialog depends on the attribute type a string or a number Once the search conditions by values are defined click the Exit button to return to the main dialog 5 If you need to delete a search condition by an attribute value highlight the desired attribute name in the list of selected types and click the Clear Condition button 6 After setting up all the necessary conditions click the OK button to start searching All objects found according to the specified conditions will be highlighted and you will be able to perform various operations with them copy move etc Attribute Libraries Attribute types can be created and stored either directly in a document or in external library files the type of attribute library files use the extension lat KOMPAS 3D offers convenient tools for managing attribute type libraries In a special dialog you can copy and move types between various libraries or between a library and a document delete unnecessary types create new types edit them etc To call the dialog for managing attribute type libraries call the command Tools Style Libraries Attribute Types Remember however that if you are using attribute types from external libraries in a drawing then to correctly work with the current drawing on another computer you would have to copy these libraries there as well if they are not present there 171 KOMPAS 3D V9 User manual Editing and
351. quirements those shall be observed not only when creating the sketch but also when editing it After making necessary changes in the sketch call the Operations Sketch command once more or click the Sketch button again A geometry producing feature and based on it elements will rebuild according to the new sketch parameters We do not recommend making such changes to a sketch that will certainly cause a failure in rebuilding dependent elements Positioning sketch on the plane sometimes editing of a geometry producing feature does not require changes to topology and dimensions of a sketched contour but only a change in the position of the contour on the plane or on the flat face To translate and or rotate a sketch on the plane select it in the Model Tree and call the context menu command Locate Sketch This command allows moving the sketch coordinate system within its plane After calling the command the fields appear on the Options tab of the Property bar where you need to define the new position of the selected sketch s coordinate system and the rotation angle of the new coordinate system with respect to its default position The position of the sketched objects with respect to its own coordinate system will not change Therefore as the coordinate system moves the sketch image moves along The changing position is displayed as a rubberbanding ghost When the desired coordinate system position is reached along with that
352. r s experience a BOM created for a product always corresponds to the assembly drawing of that product A KOMPAS 3D BOM can also be related with an assembly drawing with one or several sheets of the KOMPAS drafting system and other electronic documents This link relation is bidirectional and associative The user specifies an assembly drawing or model document to which the current BOM corresponds A drawing model will instantly receive and store within the information about what BOM is connected to it Such a relation can be established also from the current document drawing or assembly by specifying the BOM being developed for it in this case the information about connecting a drawing is passed into a BOM Therefore after establishing a link relation between a BOM and an assembly drawing the information about that relation is stored in both documents and the method of connecting them to each other originating from a drawing or from a BOM is the subject solely the user s convenience While in a BOM window you can quickly open the drawings connected to it and vice versa when working with a drawing you can quickly call its connected BOM thanks to once established relation between a BOM and an assembly drawing KOMPAS 3D remembers the location of the related documents and finds it automatically by the Open command Another property of a bidirectional relation is a capability of transferring data from a drawing into a BOM
353. rawing and a position reference number in a BOM After you have changed any reference numbers in BOM it is sufficiently to order BOM to transfer changes into drawing and new reference numbers will be automatically displayed at leader shelves 213 KOMPAS 3D V9 User manual Note If a reference number leader is a part of Macro Element then it is impossimble to create an assosiative relation between this reference number leader and BOM item The relation is not created when attaching a macro element containing a reference to BOM item And when including a reference which is a part of BOM item in macro element the relation is broken Advanced Settings of Item of BOM A BOM object may contain a large amount of heterogeneous information that complements its text portion shown in a BOM line This information is never shown in the BOM blank form however it can be viewed and edited at any time All sorts of this information are referred to as auxiliary parameters of a BOM item object Additional advanced parameters of a BOM item object include v Object settings v Documents attached to the object v Data in the object s additional columns The object settings affect its position and display in a BOM Connecting documents to an object allows to automatically transfer data between the text portion of an object and entries of a document s title block automatically create a part s base template drawing based on its image in an assembly
354. rd rules A filling template is a mold with fields to enter object properties Text ina BOM object column is automatically generated from the data in the template fields A template also stores information about which fields and in what order to use for sorting objects of a certain type The template is usually used to fill the names of standard items and materials Shipped with the system installation BOM styles are set up in such a way that the objects in their Standard Items and Materials sections are created by the respective filling templates you need to select a template style in the dialog that appears on the object creation command call In this case an object appears with the text portion field with the default data lf a BOM object is created as a result of inserting a standard item or material from the Designer s Library into a graphics document then its text portion is filled by the respective template This is described in the section Integration with a Designer s library To edit the data in the template fields and therefore the text composed from it you need in the mode of editing the text portion double click the mouse on the text created by a template The dialog of editing the values in the fields of a template will appear on the screen After changing the values and exiting the dialog by clicking the OK button the text portion of an object will be revealed according to the new data in the fields and the object
355. rdinate system Note 2 Component motion in one or several directions in the restricted by the mates applied to do this component For example coaxial components can be moved only along their common axis or turned about it Assembly component relocation can break parametric relations and constraints 91 KOMPAS 3D V9 User manual existing in it For example auxiliary elements stay in their old locations after a translation or rotation of their reference objects and so on Therefore components that were moved all marked by a red check in the Model Tree To resolve occurred conflicts rebuild and or move all objects in order for their shape parameters and position to match the position of the reference objects and satisfy the applied mates To do this click the Rebuild button on the View bar or call the command View mt Rebuild sometimes upon rebuilding an assembly exclamation signs appear in place of checks signifying an error building a component mate or assembly element For example Suppose an assembly cut feature was extruded up to a face of some part Then the part was moved so that the given face can no longer serve as a bound for the extrusion feature that is the sketch of the feature does not map on the face entirely any longer or even cannot be mapped onto the face altogether The feature can no longer be cut and after the model rebuilding this operation is marked as failing in the Model Tree Error m
356. re detailed information about the encountered situation and your actions preceding it also about your hardware configuration and peripheral devices ASCON on the Web http www ascon net KOMPAS 3D V9 User manual System Interface KOMPAS 3D is a multi window multi document system Windows of all and any KOMPAS document types can be simultaneously opened in it including models drawings fragments mixed text and graphics documents and Parts Lists Any document can be displayed in several windows The commands are called from Main Menu groups pages from context menu or by using buttons on Tool bars When working with a document of any type then the Main Menu and several toolbars are displayed Standard View Current status Compact Contents of the menu and bars depend on the type of the active document The commands to control toolbars display are located in the View Toolbars menu The user can change the contents of the Main Menu and system Toolbars or create one s own toolbars To call the dialog for performing this setting use the command Service Customize To enter parameters and to define object properties at creation and editing use the Property Bar Working with variables and equations is done via the Variables window The Library Manager is provided for managing and using libraries The Message Line displays hints on the current action or the description of the selected command unless it is hidden b
357. re located in the folder defined by the KOMPAS 3D system variable SHEETMETAL By default this folder is Sys SHEETMETAL relative to the main system installation folder Bend Table Format A Bend Table is a text file with the loa extension Table files can be viewed and edited using any text editor such as Windows Notepad Follows is an excerpt from a table of position coefficients of the neutral layer Table Type the table of K coefficients 1 Interpolation apply linear interpolation 1 lt 0 5 gt 1 0 2 0 3 0 0 0 0 375 0 415 0 439 360 0 0 375 0 415 0 439 lt 1 0 gt 1 0 2 0 3 0 0 0 0 350 0 375 0 398 360 0 0 350 0 375 0 398 55 KOMPAS 3D V9 User manual Bend tables are created according to the following rules v The measurement units are not entered in the table Linear values to measure it in millimeters angular in degrees v Lines starting with the character are comments v The table may contain empty lines Those are ignored when processing the table v The first value in the table defines its type v 1 the table of K coefficients v 2 2 the table of BA bend amounts v 3 3 the table of BD bend reductions v The second value governs use of interpolation for finding intermediate parameter values v 0 do not apply interpolation v 1 apply linear interpolation v Bend Table consists of several blocks of data Each block contains the values for the parameter K BA or BD for v
358. reated as a separate body 2 A part s body can be neither divided into pieces nor partially hidden That means you cannot hide for example an individual geometry producing boss feature 83 KOMPAS 3D V9 User manual attached to the body Therefore after calling the Hide command on some element the entire body gets hidden which includes the element 1 Changing the position of solids in part with respect to each other can be performed only by changing positions of the sketches used to create these bodies For this purpose you can call the Locate sketch or Change plane commands from the contextual menu of the sketch in the Design Tree 2 4 Multibody part s solids should not intersect each other for correct creating of associative views of this part Additional structural elements KOMPAS 3D functionalities and interface were developed to accommodate typical Engineering Design techniques The system is oriented at producing models of certain parts containing typical design elements which simplifies performing certain commonplace operations Those include the operations for creating a chamfer a fillet a round hole a draft and a rib To simplify the process of defining parameters for those elements dedicated commands are provided for creating them Thus to create a chamfer you do not have to draw a sketch sweep it along an edge and subtract the resulting volume from the main body It s enough to select edges to create a cha
359. reated in KOMPAS system version 4 x and text documents in the txt and rtf formats You can also write KOMPAS 3D V9 documents in the KOMPAS 5 11 R03 and KOMPAS 3D V7 Plus formats Note Export in previous KOMPAS version formats has certain limitations due to new capabilities introduced in later versions To read in a document of any of the listed formats except the stl and wrl files their import is not supported call the command File Open In the File Type list of the appearing dialog select the desired format and specify the filename Then click the Open button in the dialog After that a dialog would be displayed in most cases allowing to set up some import parameters Upon finishing the setup click the OK button of the dialog The selected document will be imported in KOMPAS and loaded for editing Note You can read documents in the Parasolid versions 7 13 formats Note You can read documents in the SAT versions 1 8 formats To write a KOMPAS document in another format call the command File Save As Depending on the current document type the File Type list contains the names of the formats available for writing Select the desired format When selecting the eDrawing DXF or DWG item in the File Type list the Parameters button appears in the dialog It serves to call the dialog to set up document export in the 262 KOMPAS 3D V9 User manual selected format After finishing the setup close the dialog by cli
360. reating this object and the drafted faces and the base face of the draft are highlighted in the Part window You can select other faces both to be drafted and to serve as the base To do this enable the appropriate dialog option then deselect the picked faces and select new ones You can also change the angle and direction of the draft Eal Gror To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command button Thin Shell When editing a thin wall shell you can change the values of quantitative and qualitative parameters which were defining that thin wall shell at creation and assign different source faces After calling the command the Property Bar displays the same controls as those used when creating this object and the faces excluded from creating the shell are highlighted in the Part window You can select other faces which are to be excluded from the shell To do this de highlight the previously selected faces and select new faces or simply add new faces to the already selected If you need to de highlight all previously selected faces click the mouse on a blank 118 KOMPAS 3D V9 User manual space in the Part window You can change the shell thickness and the material adding direction Ger To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command button Trimming by
361. rical object a point but rather any defining point of an object introduced at its creation a line segment start and end point a circle or ellipse center etc Coincident points are also introduced when dragging objects defining points also using an active snap Various additional mutual relations and constraints can be assigned to drawing object at any time when needed The respective commands are located on the Adding Constraints bar In the same way you can at any time remove some or all constraints from the selected object several objects Another significant method of defining relations between objects is dimensioning When creating linear dimensions the nearest geometrical point is searched for automatically and you do not need to enable object snapping The sign of a dimension being a parametric is a frame around the dimension text displayed in the highlight color by default red When deleting any parametric object all layout objects associated with it will J N ee also deleted automatically such as an angular dimension a dimension on a circle or arc a surface finish a datum symbol a hatch Assigning a variable name to a dimension creating related variable You can assign a variable name to any associative dimension create a related variable This name is used to define an analytical relation between the dimension value and other parameters that are also represented by variable names To assign a variable na
362. riented mark scale etc each of which can be included in the view designation symbol or excluded from it at the user discretion To do this use the interface items on the View Symbol tab that appears on the Property bar when creating or editing a view Each element of a view designation symbol is associatively related with a layout object or a parameter of the view itself Due to this link layout object designation symbols cut section lines enlarged details and view direction arrows and view designation symbols always match each other The presence of designation symbols for cut section lines enlarged details and direction arrows in a view implies the presence in it of the respective images Therefore to speed up working once any of the listed designation symbols is created the view creation command is launched automatically That view s designation symbol is associatively related with the just created designation symbol of a cut section line enlarged detail or a direction arrow The user just needs to set up if necessary other view parameters including its designation symbol and specify its position on the drawing After that one can proceed to drawing the image on the view A view designation symbol can also be edited as part of the view that is at the time of creating or editing the view itself or as a mere text object 137 KOMPAS 3D V9 User manual Sheets Adding new participant There are two ways to add a new sh
363. roperties in the Tree of Sheets Views and Layers show the actual state of this layer The properties of the layer which is included in the group can be changed both in the contents of the group as well as separately If the properties are altered outside of the current group then these changes will be displayed when viewing the group contents Adding a layer to the document does not make this layer automatically added to the group Creating a layer in a group adds a layer to a document When deleting a layer from a group it is not deleted from the document and when deleting a layer from a document it is automatically deleted from the group Groups are named objects By default when a group is created it is assigned a name made up from the word Group and the sequential number This name can be edited Groups of layers are saved in the document Creating Groups of Layers A To create a group select a place in the Tree of Sheets Views and Layers and click the Create Group button This button is accessible if when selecting the method of group layers in a document the selected option was Group layers The new group icon will appear in the specified location The text cursor will appear in the group name field You can change the default name After pressing lt Enter gt or clicking the mouse outside the group name it will be fixed You can change the name of an existing group by using standard Windows means To put the desired ob
364. rror copy of individual elements After calling the command of editing a mirror copy of individual elements the copied elements and the symmetry plane are highlighted in the Part window a flat face of a part can serve as the symmetry plane You can select another symmetry plane by picking it with the cursor in the model window or in the Design Tree To add other elements to the set of the elements being copied select new elements in the Model Tree To exclude elements from the copied set de highlight them in the Model Tree These changes reflect on the copy ghost displayed in the Part window After changing the set of copied elements and or the symmetry plane click the Create Object button on the Advanced Control Panel To exit the editing command without changing the copy click the Interrupt Command button on the Advanced Control Panel source solid and plane of symmetry are highlighted in thr part window after calling the command for editing mirror copy of solid 119 KOMPAS 3D V9 User manual You can select another symmetry plane by picking it with the cursor in the model window or in the Design Tree Click the Select Other button on the Advanced Control Panel to select another solid as a source one All objects will be deselected and you will be able to select new solid and mirror plane To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Co
365. rties then to define flat pattern length for all new bends the default method will be Bend Table In such 56 KOMPAS 3D V9 User manual a case you do not need to perform the described steps After entering the values for the angle and bend radius from the bend table the flat pattern parameter will be set that corresponds to those values It will be used when unbending a created sheet feature When creating the first sheet feature in a part which uses a bend table all data from the table is written in the part No relation is established between the part and the table file Any bends whose flat pattern parameters come from a table will use the data stored in the document The original table file can be changed or deleted That will not affect bend parameters Note Only one bend table can be stored in a part Changing bend table To use another table file for bends created by a table you would need to change the bend table stored in the part For this do any of the following v Call the command Operations Features of Sheet Body Table of Bends Select v Click the Browse button in the sheet body properties dialog for the current part Changing the bend table we will cause a change in the properties of all sheet part features whose flat pattern parameter was got from the table This parameter value will be selected from a new table The icons of modified features will be marked by red checks in the Model Tree s
366. ry of sketches click the Library Manager button on the Standard bar The Library Manager window will appear Use the Create Section command from the context menu and create a section in the Manager for hosting the user s sketch library 19 KOMPAS 3D V9 User manual Note Libraries of sketches can be placed in any existing section however we recommend creating for them a separate section in the Manager This in no way affects the process of working with sketch libraries but simplifies for example searching the necessary library to edit its sketches Expand select the created section and call the context menu command Create A standard dialog of file selection will appear In it go to the folder where the new library shall be placed and enter a nonexistent file name in the File Name field In the File Types field select the item KOMPAS Fragment Libraries Ifr Click the Open button in the dialog A message will be displayed that the selected file does not exist and the prompt Create it Click the Yes button The new file will be created and the Library Settings dialog will be displayed Enter the library name to be displayed in the Manager into this dialog and click the dialog s OK button The created library will appear in the Manager s list of libraries Launch a new fragments library by double clicking on its name A tab will appear in the Properties Manager window corresponding to that library U
367. s 1 Activate Defining Point To do this bring the mouse cursor to the point and click the left button 2 Drag the mouse while holding the button down The selected defining point will follow the cursor with the respective object parameter value adjusting appropriately Practically all objects have several defining points however only one such point can be moved at a time 28 KOMPAS 3D V9 User manual Creating 3D models How to work in KOMPAS 3D Select Objects To perform various commands of model creation as well as utility commands you need to specify or select objects sketches vertices edges and faces auxiliary elements parts and subassemblies Objects are selected when no three dimensional construction command is active Objects are selected in order to view them before calling a command For example an element needs to be selected in order to call the command of editing its parameters Once an object was selected by any available means its respective icon in the Model Tree turns from blue to green For example when selecting an edge the icon of the operation that produced the edge will change color and when selecting a plane the icon of this plane will change color Elements are specified when defining parameters of the current command For example after calling the command of creating a loft feature unique to sequentially specify the sketched sections after calling the command of checking assembly compone
368. s The list of all connected libraries is displayed in the way of commands in the Library menu To work with some library you just need to select the command with its name in this menu When working with several libraries it is rather convenient to set the window or panel mode for each of them Then you will be able to view the library windows simultaneously with the document window and quickly switch between them lf some libraries are not needed at the moment but you do not want to detach them from the system you can free some space on the screen by minimizing those library windows When you need them again you can quickly restore the normal display of the windows and call library functions Detaching Library If a library that was earlier connected to the system is no longer needed for work you can detach it Upon detaching a library computational resources become freed first of all RAM that were reserved to work with it 1 Call the command Service Library Manager The Library Manager window will appear 258 KOMPAS 3D V9 User manual 2 In the list of libraries located in the right part of the Manager s first tab select the name of the desired library and call the context menu command Attach To quickly detach the selected library click the mouse in the field next to its name in the list when the library is connected this field displays a check You can detach all libraries at once the two are conne
369. s translation or rotation as well as editing mates relations between assembly components Assembly editing can be the cause of breaking parametric relations and constraints existing in it You need to rebuild the assembly in order to restore them When rebuilt assembly components are moved and rearranged so that their shape parameters and position correspond to the position of reference objects and do not violate the applied mates For example a boss on a part was created by a feature extruded to a face of another part belonging to the assembly After that the first part was moved in such a way that the distance changed from the sketch plane of the boss element to its limiting object The shape of the part does not change right after moving Moreover construction and auxiliary objects based on this part stay in the original place Anything like that breaks the relations existing in the model Rebuilding the model but just the moved part to the appropriate shape a boss reaches to its face and moves construction and auxiliary objects in such a way as to make their position correspond to the new position of the reference objects When editing mates the system automatically checks whether the specified mate can be applied A new mate is created only if it does not conflict with the existing ones Please take a special note that after editing an object anywhere in the design hierarchy you do not need to define again the order of buildin
370. s you may also find helpful to know the following specifics 1 The more constraints are applied to model objects the less is the probability of a large dispersion in a series of calculations It is recommended to wholly define the image in most cases i e restricing all degrees of freedom of all objects As additional constraints you can use point fixing applying horizontal or vertical condition on line segments creating additional dimensions Degrees of freedom can be displayed for you convenience 2 If when editing a parametric model its applied relations and constraints permit several ways to rebuild the one will be realized that provides least changes to the parameters It could turn out that this case does not mean the user s expectations To get the predictable results of editing we recommend applying such relations and constraints on a parametric model that uniquely define its topology 3 We recommend not to make abrupt moves when editing a parametric model the best working practice is one step at a time For example you should not change the dimension value too much say from 5 degrees to 120 Such considerable changes shall better be made sequentially in several steps The same can be said about editing by dragging points do not move an object or point at a too long distance at once prefer making such a move in a serious of steps 4 An object parameter for example a line segment length can be related with a very ab
371. s 1 2 3 and the extruded element The set of bodies constituting the operations applicability range remains unchanged Enabling the display of bodies that were hidden at the time of performing the operation as well as dragging bodies in the Model Tree do not affect the applicability range Due to this is possible to model parts by subtracting one body from another Example To include new bodies in an operation s applicability range or exclude from it existing ones go into the editing mode of the operation and modify its applicability range using the interface items on the Property bar Methods of defining the range of operation applicability Specifics of working with multibody parts 1 When creating multibody parts remember that each body contributing to the part must be connected Therefore geometry producing features that cause body separation are not allowed For example you cannot construct a stand alone body by extrusion based on a sketch that contains several not nested closed contours This is the same reason why cutting out a geometry producing feature from a body is not allowed if that separates the body into two or more disjoint pieces Upon an attempt to perform an operation that would cause body separation or produce new disjoint pieces of one body an error appears The solid consists of separated portions Therefore if a part consists of several pieces for example a segmented washer then each piece shall be c
372. s between points on a plane in traffic documents and between points in space are calculated and displayed in millimeters At the same time the user always works with the real size in the 1 1 scale When calculating Mass and Moment of Inertia properties of parts the user can control how results are output by using the desired units kilograms or grams for the mass millimeters centimeters decimeters or meters for the length Numerical parameters of text font size line interval tabulation indent etc are defined and displayed in millimeters Coordinate Systems When working with KOMPAS 3D right hand oriented Cartesian coordinate systems are used Each model file including a just created new one has a coordinate system defined by its projection planes The model coordinate system symbol appears in the middle of the model window The origin of a drawing s absolute coordinates is always in the lower left corner of the format outline frame The origin of a fragment s coordinates does not have a well defined bias unlike a drawing Therefore when a new fragment opens its coordinate system origin point is automatically displayed in the center of the window For working convenience the user can create an arbitrary number of local coordinate systems LCS in graphic documents and sketches and quickly switch between them This is described in detail in the topic Using local coordinate systems KOMPAS 3D V9 User manual
373. s increase as well as the number of components in assemblies you may experience a slowdown in the system handling those This is often manifested in a longer time required to pan or spin the model on the screen and to create its associative views Depending on the computer configuration and components complexity a response slowdown may become noticeable when working with assemblies of over 1000 5000 components To reduce the system resource consumption and thus increase the speed of response when working with large assemblies we could recommend using certain system settings and working techniques Recommendations on working with a large assembly model 1 Ge f speed up assembly translation and rotation enable the simplified assembly display mode Set up this mode as follows v Inthe Component Simplification Parameters dialog reduced the level of detail and enable the use of the auxiliary mode for standard components If there are many standard components in the model we recommend disabling their display with the Hide option v Inthe Other Assembly Simplification Settings dialog enable all options 2 In the Display Settings dialog disable all options in the Changing Orientation group This helps avoid additional spinning and scaling the model 3 To reduce the time for redrawing the model after panning or spinning do the following v Hide origins construction planes and axes sketches surfaces cosmetic threads curves and p
374. s kit v Packaging tools kit An example of a BOM with additional sections can be a BOM accomplished per GOST 2 413 72 Rules of delivering design documentation on the products manufactured using electric wiring connectors Such a BOM may contain one of the following blocks of additional sections vy Set by XXXX XXXXXX XXXME vy Set by XXXX XXXXXX XXXTB v Installed at wiring When using Set by blocks in a BOM it is possible to specify a document normally an electric wiring diagram or a connectors table The selected document designation au is automatically substituted in the title of the sections block Additional and nested sections in a KOMPAS 3D BOM can be only the sections similar to the main not nested and not additional sections In this case the settings of additional and nested sections coincide with the settings of the respective main sections Usually the following are used as additional or nested sections v Assemblies vy of Part v Standard items v Other products v Material Blocks of additional and of nested sections and and listings of sections within them are members of a BOM style Numbering objects in a BOM with nested or additional blocks is through Sorting objects A KOMPAS 3D BOM is capable of sorting objects within a section automatically The sorting rules are a member of a BOM style The sorting rules of objects are defined for each section In this case specify
375. s needed just temporarily and the user would prefer not to close it at all To orderly place document icons which are usually displayed in the bottom part of the main KOMPAS 3D window use the command Window Arrange Icons To cyclically switch through document windows you can use the lt Ctrl gt lt F6 gt keys for a random access the Window menu commands Additionally you can use document tabs to select the current document Managing documents and Windos is also possible in the dialog called by the command Window All windows KOMPAS 3D V9 User manual Cursor and its operation Cursor is the main working tool of KOMPAS 3D Use the cursor to call commands draw and edit various objects select points and perform numerous other actions The primary method of operating the cursor is moving it by the mouse You can also move the cursor by using the arrow keys on the main or extended keyboard In this case the movement will not be arbitrary as in the case of using the mouse rather it will be incremental Note When working with model documents the only way you move the cursor is by the mouse The minimal increment of the cursor motion in graphical documents as governed by clicking an arrow button obeys the defined cursor step To change the cursor step use the appropriate field on the Current Status bar When within a text document or a Parts List pressing an arrow button moves the cursor by one character or one line
376. s to shorten the development period and getting them in production as soon as possible These goals are achieved due to fast generation of design and process documentation required for product manufacturing assembly drawings Parts Lists detailings etc making product geometry available to structural simulation software making geometry available to control sequences of CNC processing stations creating additional views of products for example when creating catalogs making illustrations the technical documentation etc The main components of KOMPAS 3D V9 are the proprietary three dimensional solid modeling system a graphic drafting editor and a Parts List Bill Of Materials design system The three dimensional solid modeling system is intended for creating three dimensional parametric models of standalone parts and assemblies that contain both original and standardized structural elements Parametric technology helps quickly create models of typical parts based on a once designed prototype Numerous utilities help solving collateral tasks of design and production line maintenance The graphic drafting editor serves to automate design and development activities in various situations It can be well used in Mechanical Engineering Architecture Civil Engineering making plans and diagrams wherever you need to develop and produce graphical and text documents BOM design system can be used together with any of KOMPAS 3D
377. s will be instantly restored Defining points handles of graphical objects You can change a graphical object s configuration by dragging its Defining Point with the mouse To switch to editing defining points of a geometrical object or a layout object click it with the mouse In this mode defining points handles are displayed as small black squares and the object is highlighted To specify a point whose position will be edited you need to activate it To do this move the cursor to the desired point Cursor appearance will change a lf a handle is moved in arbitrary way then the cursor will be displayed as four diagonal arrows If move of handle is limited or it can have only some defined positions then the cursor will be displayed as four orthogonal arrows If move of the handle brings the rotation of the object or some of its part the cursor will be displayed as four arched arrows After the cursor has changed its appearance press the lt Enter gt key activation from the keyboard or the left mouse button activation by the mouse The defining point will be activated its color will change from black to the highlighting color Modify defining point position by one of the following methods v Moving Defining Point by Mouse Activate the defining point by the mouse Drag the mouse while holding the button down The selected point will move after the cursor When the desired point location is reached release the m
378. s window even if its parameters are set not to be defined by the source item 64 KOMPAS 3D V9 User manual Managing the state of sheet part bends Any bend of a sheet part can be in the bent or unbent state By default sheet features are created with bent bends To produce a feature in the unbent state when defining its parameters enable the option Unbend X AT change the state of a single or multiple bends of a sheet part at once you E can use the commands Unbend and Bend from the menu Operations Features of Sheet Body The state of bends can be changed at any time when editing the part Differences between methods of changing bent states Additionally without changing the state of bends you can use a special mode of displaying a sheet part the flat pattern representation Cap Corners command Capping corners means modifying two adjacent bends and their adjoining flat portions of the part with the purpose of reducing the gap between them Examples of capping corners Adjacent are the bends that have a common edge positioned a as Shown on the figure _ Therefore the bends with a T f release or those shifted with respect to each others are not considered adjacent Their respective corners cannot be Capped Tip Radii angles and lengths of extensions of adjacent bends Common edge should be pairwise equal to cap corners accurately The flat portions of the part that are modified by capp
379. section of the library The names of fragments and library models can use any characters the number of fragments and sections is not limited some libraries of fragments are included in a standard package of delivery KOMPAS 3D for example library of technological denotations For operation with the libraries of fragments which are doing not enter into a standard package of delivery of system separately paid licence is required Each library of fragments is displayed on a separate tab of the Manager of libraries For customization of appearance of a tab the command Sort from its shortcut menu 180 KOMPAS 3D V9 User manual Creating fragment library Click the Library manager button on the Standard toolbar The Library iManager window will appear To create a new fragment library complete the following steps 1 Call the context menu command Add Description Document Libraries 2 In standard dialogue of a choice of a file enter a name of new library In it go to the folder where the new library shall be placed and enter a nonexistent file name in the File Name field In the File Types field select the item KOMPAS Fragment Libraries lfr Click the Open button in the dialog A message will be displayed that the selected file does not exist and the prompt Create it Click the Yes button The new file will be created 3 In the appeared dialogue Library Properties enter its name which will be displayed in a wind
380. several sketches are used each of them represents one of the feature s sections After calling the command the Property bar displays the controls to define operation parameters 47 KOMPAS 3D V9 User manual v onthe Options tab the section and if necessary and axial line the methods of construction at the outer sections and path parameters v onthe Thin Wall tab the parameters of a thin wall loft v onthe Operation Result tab the construction result new body or a boss feature All parameter values once entered or modified immediately reflect on the ghost of the loft feature displayed on the screen After defining all loft parameters click the Create Object button on the Advanced Control Panel to have the feature created The created loft will appear in the Part window and the respective icon in the Model Tree al Loft icon dhe Loft boss icon Base Part A convenient technique for modeling products that differ only in a number of design elements is using an existing model it is called the template base part The model of the part intended for use as a base for another part shall be built and saved on the disk into a file with an arbitrary name iz To use a ready made part model as a base for the current part call the Operations Base Part command or click the Base Part button on the Edit Part toolbar The Base Part command is available if there is no object in the current model yet Af
381. sheet body v SM_Thickness defined in the Thickness field on the Property Bar v SM _ Radius for an open sketch sheet body this is defined in the Radius field on the Property Bar for a closed sketch sheet body this has the default value the value defined in the sheet body Properties dialog for new parts v SM Angle has the default value v SM _H has the default value v SM W has the default value v SM BA SM_BD SM_K the value of one of these variables depending on the chosen method of defining the flat pattern length shall be entered in the respective field on the Property Bar while the rest have their default values if the flat pattern length is defined by the bend table then all three variables have their default values such values of sheet body variables are those assigned to them when creating the sheet body the defaults for the current part When creating sheet features containing bends parameters of those features may be automatically equated with values of variables v Inner radius SM_Radius v Bend angle SM _ Angle v Release depth SM_H v Release width SM_W v Bend amount SM _BA v Bend deduction reduction SM_BD v Neutral Layer Factor SM_K For parameters to be automatically equated with values of variables the parameter values must match default values for the current part Changing in the value of a variable used by different elements spreads to all of these elements In th
382. sing the Create Section and New Fragment context menu commands create a structured list of fragments in the library and a drawing in each fragment Graphic objects in the fragment of created by standard means of the KOMPAS 3D graphic editor Those can be parametric If fragments are created in the library with the purpose of used as sketches in the system of threedimensional solid modelling those should satisfy the requirements to sketches for particular operations Upon saving and closing a new fragment its image will get into the library New fragments can also be added to an existing fragments library Connecting Library of Sketches To use any library of fragments as a KOMPAS 3D sketch library tell the system where this library is located Call the command Service Options System Parts Editor Design Element Libraries Click the Modify button next to the File Name field of the sketch library In the standard File Open dialog select the fragment s library file which shall be used as the library of sketches click the Open button The name and the path to the selected file appear in the File name field of the sketch library Close the settings dialog by clicking the OK button Using Sketch Library lf you need to create a sketch on the selected plane or flat face which is not a new one rather existing in the library call the context menu command Sketch from the library After that the pane for selecting a sketch
383. sions embossings ribs Attached boss elements are protrusions and foots cut elements are slots The required number of bodies is created in the part as described above Any pair of intersecting bodies can be subjected to a Boolean operation subtraction union or intersection It is also possible to merge several bodies into one by creating a new body Construction items A sketch can be created on a plane also on any flat face of a body Some operations for example a circular pattern require axis selection among other a straight edge of a body can serve as an axis If the model faces edges and projection planes are not enough for construction you can create auxiliary planes and axes by defining their positions using one of the system provided methods Use of auxiliary construction elements significantly increases model creation capabilities Such elements are created using commands whose call buttons are located on the Construction Geometry toolbar The buttons are grouped by purpose there is a group of commands for creating auxiliary axes and a group of commands for creating auxiliary planes Additionally in the parts editing mode there is a button for calling the Split Line command on the Construction Geometry toolbar that serves to divide a face into multiple faces with creation of additional edges in the face plane 40 KOMPAS 3D V9 User manual Creating assembly General techniques A KOMPAS 3D assembly is
384. sitions in it the positions in the fragment may become for example the numbers 10 28 and 46 provided that position reference number leaders are part of the contents of the BOM object and position the calculation and their setting is enabled If a fragment contains several BOM descriptions and the objects are created for each description then when inserting that fragment in a drawing all BOM descriptions will appear in the drawing that were contained in the fragment and all BOM objects from the fragment BOM items in the model BOM objects can be created in a model part or assembly When inserting parts into an assembly the BOM objects created in those parts are passed along Creating BOM objects in a part BOM objects automatically created in the assembly when adding parts make up the so called internal objects of the assembly BOM To enable automatic creation of the respective internal BOM objects when inserting a subassembly into an assembly it is required that when creating the subassembly document its external BOM objects were generated Creating BOM objects in an assembly Since an assembly having one or more subassemblies included can be in turn a subassembly of some other assembly it is possible to create external BOM objects in it Therefore any assembly document may contain not only internal BOM objects but also external objects the BOM objects that will be passed to those assemblies in which this assembly will
385. sketch contains projections of edges of the protruded feature boss the sketch is dependent on this feature The cut feature is created by an operation with a sketch the element is dependent on the sketch When creating a boss feature its extrusion depth was defined up to a vertex of a revolved feature then the extruded feature is dependent on the revolved feature A chamfer was created on an edge of a sweep then the chamfer is dependent on the sweep The construction axis is drawn through vertices of features the axis becomes dependent on those features The construction plane is drawn through the axis perpendicular to a feature face the plane becomes dependent on the axis and the feature This repeats on and on There are two types of relations between elements in the KOMPAS S3D hierarchy If an element is dependent on another element it is referred to as derived or dependent with respect to the parent element If an element is dependent on another element then its parent element is called original with respect to the dependent Projection planes existing in the part model right after its creation are always the source parent elements only based on them you can create the first sketch and other model elements and are never dependent elements their parameters do not depend on other elements The last element in the Design Tree is never a parent since no elements were created after it that could reference it Any other el
386. slave mode the BOM objects of the current style will become visible in this case BOM objects of other styles are not deleted from a document but will just not be visible synchronization commands work with a BOM that belongs to the current description By default upon calling the command BOM in Drawing Show a current style BOM is displayed on the drawing If other style BOMs need to be shown on a drawing call the description management dialog and enable in it the display of the desired BOM descriptions on the page Creating objects for different style BOMs in a document and passing them into different BOM documents is cardinally different from changing a BOM style v When changing the style the same objects of one BOM can be displayed in another form get into the sections with different titles have a different composition of columns this is described in the section Changing Existing BOM Style v Meanwhile when working with different descriptions autonomous groups of objects are created each of which is passed into a separate BOM document Generally speaking working with several BOM descriptions in one document drawing or model is not a typical technique of creating BOMs You shall proceed in that way only when creating several BOMs based on one assembly drawing has well defined grounds Synchronizing data when opening a BOM When opening a BOM document a check is run to match BOM objects in the BOM itself and the BOM
387. ssed onto a leader shelf in a drawing Position reference numbers can also be assigned to BOM objects automatically When adding BOM objects in the respective Position column the numbers are set automatically that reflect the order of object creation As a result of sorting or creating objects not in the order in which sections follow the object s numbering order may not match the order in which they are positioned in the table This mismatch can be fixed by the command Set Ref Nos When using the automatic position reference numbers placement the order in which objects follow in a BOM is accounted for along with the number of reserved lines in each section and disabling positions setting in certain sections i Note that disabling reference number creation means disabling reference 236 KOMPAS 3D V9 User manual number displaying for objects If setting position reference numbers is enabled in the section but the displaying of reference numbers is disabled for some objects then to these objects will be assigned position reference numbers when having the automatic position reference numbers setting and even though those numbers will not be visible in the table because of the ban to display reference numbers still the numbering of next objects will account for those numbers The Position column will be cleared for all objects and reference numbers will not take into account objects and reserve lines in next section whether
388. ssigning the style to a newly created object Changing the style of multiple objects You can assign the same style to several objects in a drawing To simultaneously change the style of an arbitrary number of objects complete the following steps 1 Select all objects whose style needs to be changed You can select objects of different types lines hatches points since their styles can be changed simultaneously 2 Call the command Service Change Style After calling the command a dialog is displayed letting you to specify in the Replace What field which styles of the selected objects curves points and hatches are to be changed and to select the replacement styles To change styles of all selected objects of a given type even if those were bearing different styles before now to a uniform one pick the choice in the list For All Styles In the Replace With field select the names of the replacement styles For a Hatch not only can you set a new type but also the new values of the step and the inclination angle Styles are shown in the preview panes helping to quickly select the desired replacement choice 3 Click the OK button The dialog will close and the changes to the styles will immediately reflect on the document Geometric calculator As you are creating or editing an object the Property Bar displays the fields to enter parameter values of this object You can enter data pertaining to an element manu
389. stored in the profile Note This file does not store the information about the contents of the View and Current Status bars in the following modes when editing a local fragment editing specifications editing BOM objects in a graphics document Changes to the content of the said bars are maintained in these modes only through the end of the working session Managing each loop saving is done in the configuration saving parameters dialog Existing configuration settings can be saved in a profile file Using this profile later will allow quickly changing the current setting to the one stored in the profile Note Note that only the settings modify from the default are stored in the cfg and prj files and in the profile file Unchanged parameter data is not written When reading cfg and prj files or applying a profile default values will be assigned to the parameters having no reference information At the same time the default location of the SYS folder is taken from the KOMPAS ini file and if the latter is missing is determined by the respective KOMPAS environment variable value The data that is not related to the system setup but is necessary for running KOMPAS is stored in the Registry This includes the following information v User information v List of recently opened files v Information about initial configuration settings the name of the profile used by default when the system starts v The current
390. t the name CS 1 is proposed for the LCS but you can enter another more suitable name instead 3 o finish working with local CS s click the Interrupt Command button on the Advanced Control Panel or once again click the Local CS on the Current Status toolbar Managing local coordinate system A To manage LCS s created in a document call the command Insert Local CS or click ithe Local CS on the Current Status toolbar 164 KOMPAS 3D V9 User manual Interface items we will appear on the Property bar to edit parameters of any LCS in the document To do this select its name in the list and then define the desired coordinates of the origin the inclination angle of the axes and the name A To create an LCS click the New Local CS button If you need to set some LCS as the current select its name from the list and click the Current Local CS A check will appear next to the LCS name To make an LCS not current click the Current Local CS button once more A check next to its name will disappear To delete an LCS select it and click the Delete button K To finish working with local CS s click the Interrupt Command button on the Advanced Control Panel or once again click the Local CS button on the Current Status toolbar Deleting a local coordinate system 1 t To delete an LCS call the command Insert Local CS or click the button Local CS on the Current Status toolbar Interface items we will appear
391. t of the first page of the design draft you will be provided with four entries to input information about document revisions You can enter any data there If a revision table is created on a drawing page then the created revision table will replace a portion of the title block intended for revision notes Just like BOM objects the revision table objects consist of v text portion v Geometry graphical objects v Advanced parameters The revision table handling techniques are similar to working with a BOM For example you can sort the objects in the revision table set up advanced object parameters enable or disable the object display in the table create auxiliary objects and SO on To change the default settings of the evision table style call the command Service Style Libraries BOM Styles connect the library of BOM styles graphic lyt in it select the revision table style to edit and click the Edit button The dialog of BOM style settings will appear on the screen in which you can set up the revision table style as desired Note Some parameters for example the number of variants etc are not used when setting up the revision table style 188 KOMPAS 3D V9 User manual Associative model drawing The KOMPAS 3D system is capable of creating associative drawings of three dimensional models An associative image is built in a common drawing In it associative views of a 3 D model a part or assembly are created
392. t or a unit have no type v Numerical parameters of the object The set of parameters depends on the object v For the objects representing a variety of a curve the edge a space curve an outline in the thumbnail etc is defined length v For cylindrical spherical and round objects the surface of a rounding off an edge and outlines in the form of circles arcs of circles etc is defined radius and diameter v For points co ordinates are output v For plane sides co ordinates of a normal vector etc are output Among object parameters names and values of variables of this object are displayed also For assemblages the quantity of components of the first level quantity of interfaces and units is underlined Advanced info v Colour and optical properties of the object v _ Ratios in the form of lists of initial and derivative objects v For faces Parameters of edges limiting them for edges Parameters of finite tops v For assemblies Quantity of components of all levels i e the sum of components of the first level and other components The main information on the object is by default produced short i e If necessary having changed customisation you can receive complete i e the main and additional information Objects the information about which are necessary for receiving it is possible to 130 KOMPAS 3D V9 User manual select from the Tree or in a model window and both before call of the command and af
393. t pattern by specifying bend amount Flat pattern length BA of the cylindrical portion of a bend short for Bend Allowance is defined by the user The full flat pattern length L of a bend when unbending see Fig is calculated by the formula L A BA W L i Re ALBA OB a b Unbending a bend a Bend is bent b the bend is unbent 54 KOMPAS 3D V9 User manual Bend tables When creating bends in a sheet part the flat pattern parameter can be set arbitrarily subject to existing constraints Dependency of the flat pattern parameter on the material thickness angle and bend radius can be found for example experimentally and put together into tables In the KOMPAS system those are called bend tables and can be used for defining flat pattern lengths A table type is determined depending on its contents v Table of position coefficients of the neutral layer v Table of bend amounts v Table of bend deductions Bend tables are saved in a file with the loa extension KOMPAS 3D Distribution includes four bend tables v Two tables of position coefficients of the neutral layer v Sample1 K_factor loa v Sample4 K_factor loa v Table of bend amounts Sample2_Bend_allowance loa v Table of bend deductions Sample3_Bend_deduction loa Note The described tables contain sample data and are provided as an example Use those as an example for creating user s bend tables Examples of bend tables a
394. t toolbar The Cut Extrude command is available if the model already has the part base and a single sketch is selected Revolved cut sketch requirements After calling the command the Property bar displays the controls to define operation parameters on the Options tab the construction method the direction and angle of rotation Tf KOMPAS 3D V9 User manual on the Thin Wall tab the parameters of a thin wall revolved feature on the Cutting tab the construction result subtraction or intersection All parameter values once entered or modified immediately reflect on the ghost of the im feature displayed on the screen After defining all extrusion parameters click the Create Object button on the Advanced Control Panel to have the feature created The part with a revolved cut or the part intersection with a revolved feature appears in the window while the icon of the cut feature appears in the Model Tree Revolved cut icon Swept Feature To cut a sweep from a part call the command Operations Cut Sweep or click the Cut Sweep button on the Edit Part toolbar The Cut Sweep command is available if the model already has the part base and at least one sketch not used by any other operations You do not have to select sketches before calling the command To cut a sweep you need to define its section and the section sweeping path The section must be a sketched one Any 3D or planar line curve can ser
395. tab After setting up all parameters specify the image anchor point position A new cut or section view will be inserted in the current drawing and an icon of the created view and its name will appear in the drawing s Design Tree Ht View icon in the Design Tree Detail Section To create a detail section or cut in a model view call the command Insert Auxiliary View Detail Section or click the Detail Section button on the Associated Views toolbar In the drawing area select a closed contour limiting the detail section Note 1 This contour must be created in advance Note 2 This contour shall not have self intersections Note 3 Detailed section cannot be created on Enlarged details If necessary enter the number and name of the Detail Section in the same name fields on the Property Bar The Cutting Plane button is available when auto object creation is off and also when editing an earlier created Detail Section It serves to select the cutting plane position again a B The switches of the group Cut Section serve to select the image type Cut or section view Note This group is accessible if the view on which the detail section is based is not a cut section Otherwise the image type is the same as the type of the image on the 192 KOMPAS 3D V9 User manual base view and the change is impossible Hatch Properties A straight line ghost will appear on the screen the trace of the cutting plane
396. tains the list of all possible for this BOM types of additional columns and their values pertaining to the current BOM object To enter or edit a value in an additional column activate the respective field in the dialog by double clicking the mouse The utility commands allow summing up the numerical values of the auxiliary parameters in this way the number of identical objects in an assembly and even the number of objects in its different variants can be accounted for 216 KOMPAS 3D V9 User manual How to sum up additional parameters In this way you can calculate the mass or cost of a product being specified that is provided that you entered the mass or cost of all BOM objects Editing the text portion of a BOM object To go into the mode of editing the text portion of a BOM object double click the mouse on the lines in which this object is located or by focusing the selection on the object by clicking the mouse once or arrow keys press the key lt Enter gt In the text input mode you can access the font and paragraph formatting commands as well as the commands for inserting ratios sub superscripts overline and underline Special Character symbol and text templates see also the section Using Text Templates There is also a provision for automatic insertion of the number and name from the special dialog When entering symbols into a column their horizontal spacing compression is automatically adjusted to fit them al
397. tants to insert in equations To delete an expression selected in the viewing window press the lt Del gt key The list of variables in the current graphic document is displayed on the Variables tab After typing new or editing existing relations click the Exit button Applying and lifting constraints Various mutual relations and constraints can be assigned to drawing object at any time when needed The respective commands are located on the Adding Constraints bar To apply a constraint to an object or several objects complete the following 1 Go to the Adding Constraints bar by clicking the switch button 2 Call the limit setting command by the respective button on the bar 3 Sequentially select the objects to which you need to apply constraints needless to say the object type must correspond to the constraint type To view constraints or remove them from an object complete the following 1 Select the object whose constraints you want to view 2 Click the Show Delete Constraints button on the Adding Constraints bar E Object constraints will be shown in the list on the Property Bar If you need to delete some constraint select it in the list and click the Delete button located above the list To view constraints applied to another object select it by the mouse in the document window 209 KOMPAS 3D V9 User manual To remove all constraints from one or several objects complete the following 1 By any me
398. ted from the document The BOM styles shipped with KOMPAS 3D the Designer s library and the system library of attributes Spc lat required for creating the filling templates of standard item and material names are set up in such a way that the designations of standard items and materials are created fully compliant with the applicable standards while the BOM objects created as a result of working with a library are put in the appropriate sections of the Simple and Group BOM The user can set up some parameters that relate the Designer s library with a BOM This is described in detail in the section Setting up Designer s Library configuration You can insert BOM objects corresponding to library macro elements directly into a BOM document for example when creating a BOM unrelated to a drawing To insert an object launch the desired element creation command from the Construction library set up its parameters in the appearing dialog and click the OK button Note In this case the state of the option Create BOM object does not matter The BOM object contained in the selected element will be added to the respective BOM section A prompt will be displayed regarding adding the next object When inserting several identical products with same parameters then twin objects are created in a 242 KOMPAS 3D V9 User manual BOM Using BOM mechanisms to create other documents Just like a KOMPAS 3D drawing document the file cdw may c
399. ted washers are made 43 KOMPAS 3D V9 User manual of several disjoint bodies sometimes a simple element is used to start the part creation for example a block or cylinder which would contain the conceived part or a portion thereof sometimes the overall part shape is such that it would be easiest to obtain it by intersecting several bodies In some cases the idea about steps of the part design can be formulated by imagining the technological process of manufacturing it Generally speaking it is not impossible to describe a universal recipe to construct a part Designers gain experience in a preferred modeling approach after independently creating several models Adding part material Adding part material means creating new bodies in it and attaching new boss features to anexisting body bodies Both the new body and the boss being attached can be features of one of the following types v Extrusion Feature v Revolution Feature v Loft Feature v Sweep Feature Any feature creation starts with creating the sketch A sketch can be positioned on a projection plane auxiliary plane or on a flat planar face of a body Naturally the sketch of the first feature can be positioned only on a projection or auxiliary plane After the sketch is finished specify the method to sweep the sketch in the space to obtain an element of the desired type that is select the geometry producing feature type Refer to the fo
400. tences and a BOM consists of BOM objects A BOM object is of an informational nature It is a compound of heterogeneous data about a certain material object for example a part assembly unit or a document which is being included into a BOM If one would apply this terminology to a paper bill of materials then one can say that its object is a line or several lines with the data about a single item a document a part a standard item etc If one would compare it a BOM with a database then a BOM object is similar to a record in the database The visible appearance of a BOM item object KOMPAS 3D is its text portion located on the lines of the BOM blank form It exactly matches a line of a paper BOM But unlike the latter kind of a line entry an electronic BOM object includes much more information BOM item object types BOM objects are distinguished into main items and auxiliary items A provision is made for main items to automatically fill the columns sort within a section connect a graphical document from an assembly drawing turn off the display of the object in the table etc When filling in a BOM we recommend to create main BOM objects whenever possible Unlike main items the utilities offered by the BOM do not work for auxiliary objects The auxiliary objects are not sorted automatically not included in calculations and in position reference numbers placement etc The auxiliary objects are recommended t
401. ter Objects can be specified by group The information is produced on each object of group At repeated instructions of the object the information on it is output once again Component Collision Detection Sometimes one of the purposes to model an assembly is to find out the locations of unwanted intersections and interferences between components stumblings in a design The Collision Detection command is provided to identify such locations S To call the command click the Collision Detection button on the Measurements 3D bar or pick it by the name from the Service menu After calling the command the List of Components and Detected Intersections panes appear on the Options tab of the Property bar Sequentially select the components that need to be checked against collisions Components can be selected in the Model Tree or in the Model window The selected components are enclosed in an outline box Their names are displayed in the dialog If you also need to identify touching components enable the option Treat Tangency as Interference After selecting the desired components click the Detect Collisions button on the Advanced Control Panel The Detected Intersections list displays the sequential number of an intersection and the names of the intersecting contacting components while the intersection or contact area is highlighted in the model window You can run intersection checks for other components without exiti
402. ter calling the command the standard File Selection dialog will appear There select the desired folder and specify the name of the file containing the part The selected part image will appear in the dialog s preview pane If the template base part file is selected correctly click the Open button The insertion method dialog for the template base part will appear You can insert a template based part into the current file with or without maintaining its relation with the source file If you need to insert a part while maintaining its relation with the source file activate the switch As External Reference If you need to insert a part without maintaining a relation with the source file activate the switch Without History By enabling the Mirrored Part option you can insert into the current part a mirror copy of the base template part In this case mirroring is done with respect to the XOY plane my After specifying the insertion method for the template base part click the Create Object button on the Advanced Control Panel The base template part or its mirror copy will be inserted in the current file Further manipulations with the base adding bosses and cutting volumes making chamfers holes etc are not different from those on a base produced by a sketched feature When using a base template which maintains a relation with its source file keep in mind that it is not copied to the model but exists in it as a link to its
403. ter whether the axis denoting line segment has common end points with the base face For a bend to be created correctly it is sufficient that the axis projection extension has common points with the base face The result of bend creation depends on the relative position of the base face i and the bend line A general rule is Bending is done on the portion of the part including the base face or fraction thereof that fully or partially contains the bend line Bend by Line Examples If a straight line segment or a polyline segment is used as a bend line and the face being bent has a complex shape then for the bend to be constructed correctly we recommend positioning the bend line in such a way as to explicitly go through all portions that are meant to be bent Ms To call the command click the Bend by line button on the Features of Sheet Body toolbar or pick it by the name from the menu Operations Features of Sheet Body Specify a base face and a bend line The sheet feature ghost display is enabled by default and such ghost is displayed in the Model window with current parameters v Select the direction of counting the angle v Define the fixed side v Select an option for interpreting the angle and define the angle value in the Angle field v Choose a bend radius type and enter the value in the Bend Radius field v Select bend type v Select the method of defining flat pattern length v Select the desired bend state
404. terial is added on its sides making up a shell lf material is added to all part faces the resulting part will contain a void inside You cannot create such parts in KOMPAS 3D to create a shell you need to exclude one or several faces from adding material These faces will become holes or a hole in the resulting shell To create a thin wall shell call the command Operations Shell or click the Shell button on the Edit Part toolbar ES After calling the command the Property bar displays the controls to define operation parameters Define the thickness and the material adding direction outward or inward Select part faces not to be involved in creating a shell by picking by the cursor in the Part window All parameter values once entered or modified immediately reflect on the ghost displayed on the screen l After defining all shell parameters click the Create Object button on the Advanced Control Panel to have the shell created A thin wall shell image will appear in the Part window and the respective icon in the Model Tree f Thin wall shell icon Working with the resulting shell will be same adding and subtracting bodies creating chamfers fillets and holes Creating patterns of elements When building a model you may need to create several identical operations so that the resulting elements are ordered in a certain way for example making a rectangular pattern or being symmetrical with respect to a plane
405. tering the parameters finish the construction Example of creating a l heet body based on a closed sketch Creating a sheet body with an open sketch The following is special about creating a sheet body based on an open sketch v Line segments in the sketch make the flat portions of the sheet body v Arcs in the sketch make bends of the respective radii v Angles in the sketch a contour make bends with the user specified inner radius 58 KOMPAS 3D V9 User manual Example of an open sketch for Prid creating a sheet body To create a sheet OZ material body with an open sketch you need to define its parameters v Sketch Extrusion Direction The forward direction is shown by the arrow in the Model window The Direction radio group serves to switch the direction Extrusion iT direction Contour angle a f Example of specifying extrusion Rimi e direction for an open sketch l v Method of defining extrusion depth To do l this use the drop down list Method 1 a If the To vertex or Up to Face method is j selected then the switches in the Type 1 radio group become accessible EjTo vertex Ea Up to Face v Using the switches in this group define the extrusion depth direction with respect to the selected vertex or surface v Enter the extrusion depth in the Distance1 field Ba If the two sided extrusion is selected then the Method 2 Type 2 and Distance 2 interface items become available o
406. that were selected by the user v A standard view front back top bottom right left v A projection view a view in the direction specified with respect to another view v A View in Arrow Direction v Cut section simple with a jog by a polyline v Detail View v Detail Section v Enlarged Detail Standard and projection are automatically built in the projection relation the user can break this relation at any time when working with the document A drawing is created by subsequently adding necessary projections or cuts Initially an arbitrary view is created for the model selected by the user and the model orientation is specified which is best suited for the main view Next projections and cuts are constructed by this and the following views If necessary Enlarged Details can be added in the drawing the image of any view can be reduced resulting in a Detail View or a Broken View When creating drawings of simple models one can use the Standard Views command that creates the required set of projections All views maintain a relation with the model changes in the model propagate to the images in an associative view When creating a cut section it is possible to designate inseparable components of the product part or assembly When creating any view it is possible to specify what product components shall not be displayed on it You can synchronize data in the drawing s title block designation name mass
407. the context menu of the sheet in the list The Sheet Size dialog will appear on the screen To define the sheet width and height select the Custom option and enter the desired values in the respective fields To finish the sheet format modification click the OK button To close the Sheet Format dialog without changing the settings click the Cancel button To modify the multiplicity of a sheet select the desired value from the combo box in the Multiplicity entry To change a sheet layout style click its name in the Layout entry The dialog will be displayed Select a template name The Style Name list of this dialog displays the names of styles available in the current library of styles Select the desired name and click the OK button To close the dialog without changing the style click the Cancel button To connect another styles templates library click its name in the Template Libraries entry The Template dialog will appear on the screen Click the Libraries button to change the library The Windows standard File Open dialog will appear on the screen In the dialog select a new library file and click the OK button Click the Clear button to detach the styles library To finalize the style library selection click the OK button To close the Template dialog without changing the current style library click the Cancel button To view the changes in the layout of the drawing sheets without closing the dialog click the button Apply Th
408. the Model window When the symbolic notation of a surface appear next to the cursor click the left mouse button Cursor shape when selecting a surface or face To specify a construction plane move the mouse cursor to it in the Model window When the symbolic notation of a plane appear next to the cursor click the left mouse button T Cursor shape when selecting a plane To select a 3D line curve or sketch move the cursor to the desired object in the model window When the symbolic notation of a line appear next to the cursor click the left mouse button t Cursor shape when selecting a 3D line or a sketch To specify a ghost of the cosmetic thread move the mouse cursor to it in the Model window When a thread symbol appears next to the cursor click the left mouse button Ta Cursor shape when selecting a cosmetic thread When selecting object while holding down the lt Shift gt key you select a component in the model window whose element that selected object is or to which it belongs In this way you can select for example a whole part by picking one of its elements a face edge or vertex 31 KOMPAS 3D V9 User manual If while holding down the lt Shift gt key you select an axillary object then the parts or subassembly is highlighted in the model window to which that auxiliary element belongs Sometimes to perform a command you need to select a group of objects To select multiple objects i
409. the cursor the point to insert or enter the desired coordinate values or in the Properties Bar fields You can also defined the scale of the insert and the rotation angle of the objects being inserted with respect to the anchor point by entering the values in the Properties Bar fields l Tl If the scale of the dimension containing insert object is changed you can specify hether or not to scale the leaders and extension lines For this purpose use the switches Scale and Do not scale of the Extension Lines group on the Property Bar If scaling of extension lines is enabled then the length of leaders and extension lines changes according to the entered insertion scale If scaling of extension lines is disabled then the length of leaders and extension lines stays the same as in the original image 3 Once the anchor point is fixed the clipboard contents are pasted into the document You can placing them in the appropriate positions within the document and setting the desired scale and rotation angle An unlimited number of the insertions can be made from the clipboard within one command call Ger 4 To finish inserting clipboard content into a document click the Interrupt Command button on the Advanced Control Panel or the lt Esc gt key Inserting objects located on different layers The clipboard may contain objects that were residing on different layers You can place all objects from the clipboard on the current layer regard
410. the drawing The specification name is set for concrete style of the specification and saved in the drawing 240 KOMPAS 3D V9 User manual The command BOM BOM on The Sheet Name Allows to work with the name of the specification of current style If on a drawing leaf tables of specifications of different styles for input or editing of their names use the command the Name are displayed From shortcut menus of these tables The distance from the specification to the name is identical to all tables of the specification displayed on a leaf It is set in dialogue of customisation of parametres of the name of the specification on sheet Default distance 5 mm In dialogue of customisation of parametres of the name of the specification on a leaf it is possible to customise also default parametres of the text of the name Handling codes and names when displaying a BOM object The display of a product s name in the textual entries of a BOM object is automatically turned off if the contents of the entries Designation stripped off the code and Name stripped off the document name of the BOM object fully match the contents of the respective entries of that BOM s title block The full text the product name and the document name in the Name entry of a BOM object is displayed only in the mode of editing the textual part of the object The effect of a drawing s title block on the display of BOM objects in the slave mode and in the
411. the option again since an associative link is generated automatically when selecting a reference object If you need to specify a new point position you can proceed in two ways v Enter the new coordinates values in the X Z and Y fields The ghost of the point will move to the point with the specified coordinates v Unfix the fields X Z and Y by toggling the switches with the mouse Use the mouse to specify the point position in the model window At the same time you can link the point being edited to a new reference point PE When done with editing click the Create Object button on the Advanced Control Panel Edit surfaces You cannot edit surfaces imported from external files using KOMPAS 3D tools When editing surfaces created directly in the model file you can change the values of quantitative and qualitative parameters which were defining the surface at creation but you cannot change the surface type For example an extrusion surface cannot be converted to a revolved surface After calling the command the Property Bar displays the same controls as those used when creating this object Surface editing techniques are similar to editing solids of the respective types Parameter changes are promptly propagated into the Part window in the way of a ghost feature with updated parameters D To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command butto
412. the origin of the coordinate system of a new view and fix that point 6 To finish the new view creation click the button Create Object on the __ Advanced Control Panel The newly created view will become current The view that was current before will revert to its original state Deleting a view You can delete view views from the drawing To delete a view views complete the following steps 1 Select a view views by any convenient method see the topic Selecting a view 2 Call the command Edit Delete Selected Objects or press the lt Delete gt key The Delete Views dialog will appear It will list the views to be deleted 3 Confirm the deletion The system view cannot be deleted Only objects inside it are deleted but the empty view itself always remains in the drawing You can also delete views using the Document Manager For this do the following 1 Call the command Insert States of Views or click the States of Views button on the Current Status bar The Document Manager dialog will be displayed 2 Select the root element in the Tree of Sheets Views and Layers the current drawing The List of Sheets Views and Layers will display all views existing in the drawing 143 KOMPAS 3D V9 User manual and their properties 3 In the List select the view views to delete 4 Y Click the Delete button on the Document Manager toolbar Note You can delete neither the current nor a system view
413. the selected contour will be removed from the screen display To reenable the full view display from the context menu of its respective item in the Design Tree call the command Detail View 191 KOMPAS 3D V9 User manual Enlarged Detail aal To create an enlarged detail in the current drawing call the command Insert Auxiliary View Enlarged Detail or click the Enlarged Detail button on the Associated Views toolbar Select an enlarged detail designation symbol in the drawing window The ghost of the image will be displayed in the form of an outline box The Property Bar will display controls for setting up parameters of the objects being created After setting up parameters specify the view position on the sheet A new view will be inserted in the current drawing and an icon of the created view and its name will appear in the drawing s Design Tree E View icon in the Design Tree Cut Section Ein To create a cut or section view in the current drawing of the model call the _command Insert Model View Cut Section or click the button Cut Section on the Associated Views toolbar Select a cutting plane designation symbol in the drawing window The ghost of the image will be displayed in the form of an outline box The Property Bar will display controls for setting up parameters of the objects being created To set of the hatch that will be used in the cut section being created use the interface items on the Hatch
414. the selected surface if a flat object was selected then the Coincident mate is created if it was a cylindrical face the Coaxial mate For example before creating a Bolt an internal surface of the hole for that bolt was selected in the assembly The new bolt will be inserted in the assembly coaxial with the selected hole When adding a standard item to an assembly its respective icon will appear in the Model Tree The main methods of working with a standard item moving mating are the same as when working with an individual component part subassembly Inserting identical components into an assembly Should the current assembly includes several identical components parts or subassemblies you can insert them as follows 1 Insert the required component in the assembly You can also create it in the current assembly context 2 Select this component in the Model Tree or in the Model window 3 Press the lt Ctrl gt key and hold it Then place the cursor on the component in the Model window depress the left mouse button and drag You can also place the cursor on the component icon in the Model Tree Depress the left mouse button and drag the mouse cursor out of the Tree window then press and hold the lt Ctrl gt key continue dragging the mouse cursor in the Model window The inserted component ghost will be displayed 4 Specify the component position in the Model window by the cursor and release the mouse button and t
415. thread located on the invisible portion of the model is displayed in the associative view if the mode of showing hidden contour lines is enabled in it The style set for those lines is also used to draw cosmetic threads The user can enable or disable threads display on the views More Proceeding to three dimensional model editing lf KOMPAS 3D is installed on your computer and you have a license on its HASP key you can proceed with editing a three dimensional model directly from a drawing which is associatively related to it To do this expand the branch of the Design Tree corresponding to any view which depicts the component to be edited and from the context menu of that component call the command Edit in Window KOMPAS will open a window with the selected three dimensional model Make the desired changes save and close the window When returning to the drawing window containing the image of the edited model the system will prompt you on rebuilding the drawing The answer Yes to this query means rebuilding of the drawing image accounting for the changes introduced in the model Rebuilding an assembly drawing consisting of a large number of parts and subassemblies can take a significant time Therefore if you need to edit several components of such an assembly it is recommended to rebuild its drawing just once after finalizing changes rather than each time after editing an individual component Note Generally speaking you ca
416. tically appear in the column Zone in which the connected geometry is located and after each change to a position reference number of the BOM object for example as a result of sorting the new number will be put on the shelf of the respective leader in a drawing BOM objects created in a drawing can be put in the BOM table on this drawing For more information see the section BOM placement on a page 220 KOMPAS 3D V9 User manual BOM objects in a fragment A fragment just like a drawing sheet may contain BOM objects Those are created and edited by the same rules as BOM objects in a drawing A fragment cannot be connected to a BOM Therefore object cannot be directed passed from it into a BOM However a fragment can be inserted in a drawing Then BOM objects just like graphical objects will be in the drawing with all their properties preserved Such object transfer occurs by a neat method of insertion by a link embedded or exploded If position reference number leaders are part of the contents of BOM objects in a fragment then when inserting a fragment into the drawing after sorting all BOM objects in this drawing the leaders will bear the new position reference numbers according to the position of the objects that came from the fragment among the drawing s BOM objects Simply speaking if in the fragment the position numbers are 1 2 and 3 then after inserting this fragment into the drawing and recalculating po
417. tion and add parametric relations and 45 KOMPAS 3D V9 User manual constraints as necessary You can project map edges or vertices of existing bodies on the sketch Sketch can contain text When exiting the sketching mode all its texts are converted to one or several contours made of NURBS nonuniform rational B spline 4 Then return to the three dimensional construction mode To exit the command click the Interrupt Command button on the Advanced Control Panel or press the lt Esc gt key Next call the context menu command Sketch or undo the Sketch button on the Current Status bar The just completed sketch will be highlighted in the Part window and selected in the Model Tree Extruded Feature E To create an extrusion feature call the command Operations Feature Extrudeor click the Extrusion Feature button on the Edit Part toolbar The Extrude command is available if at least one sketch is selected After calling the command the Property bar displays the controls to define operation parameters v onthe Options tab the extrusion direction extrusion depth and draft angle v onthe Thin Wall tab the parameters of a thin wall extrusion v onthe Operation Result tab the construction result new body or a boss feature All parameter values once entered or modified immediately reflect on the ghost of the extruded feature displayed on the screen After defining all extrusion parameters click the Cr
418. title block and the documents connected to it You can toggle such transfer on or off from the current BOM Description of BOMs connected to the drawing A BOM description is the file name of the BOM connected to a graphics document or a model document plus that BOM s style If in a graphics document or in a model document there are no BOM objects then 230 KOMPAS 3D V9 User manual such a document does not contain BOM descriptions At the moment of creating the first BOM object in a graphics document that document receives a BOM description An object is created according to the style set in the system for new BOM documents therefore the appearing description contains a BOM style specified in the settings of new documents Before any BOM document is connected to a graphics document or a model document the description does not contain any BOM file name If while working with a BOM a drawing or model was connected to it then a description appears in this document that contains the style and the name of a BOM file after which the objects are created in the drawing according to the style in the connected BOM This is done to ensure that the objects in a drawing model and in a connected BOM use the same structure columns sorting rules and that their appearance doesn t change when exchanging objects between documents In the case of a fragment a BOM description includes only the list of BOM N syes This is because a fragment is
419. tive circles All these circles will be constructed with one center with the system skipping Center selection for each new circle If you unfix the center coordinates and then select another center point you can create a new family of concentric circles To reset the earlier remembered parameters undo the Remember Status button Therefore to use the same parameters when entering objects proceed as follows 1 Enter the parameter values to remember 2 Click the Remember Status button 3 Keep constructing as long as remembered parameters are needed If the entered parameters uniquely define the object for example an already fixed center point and circle radius then the Remember Status button will become 25 KOMPAS 3D V9 User manual inaccessible Fixing parameters Any parameter of the object being created can be fixed In this case the value of the givenparameter will be maintained constant while other parameters will remain variable The indication of a fixed parameter is a cross displayed on the switch next to the parameter field Suppose you need to draw a line whose length should be exactly 60 mm Fix the line start point and then enter the value 60 in the line length field and press the lt Enter gt key Now upon any cursor movements only the line inclination angle will change while the length stay equal to 60 Note that the parameter will be fixed automatically regardless of the method of inputting it in i
420. to flat pattern parameters stored within those parts A flat pattern image can be produced when creating the following associative views v Arbitrary View v Projection View v View in Arrow Direction To generate a flat pattern image in the view being created activate the Flat pattern amp F switch on the Options tab of the Property bar It is accessible if the flat pattern parameters are set up in the part Use the Lines tab to control how the bend line is drawn A bend line can be automatically drawn on a view if the flat faces resulting from unbending bends project map on this view without distortions Therefore to correctly select the plane of the view projections containing the flat pattern you need to know how the flattened part will be positioned with respect to the main projection planes This position depends on what face of the part was picked as the fixed one at the time of setting up the flat pattern Eal Turn On drawing of bend lines set up other view parameters and then confirm its creation 19 KOMPAS 3D V9 User manual An arbitrary view with a flat pattern image is automatically assigned the designation symbol that contains the symbolic graphic mark reoriented When creating a View by Arrow or a Projection View then you cannot select an orientation from the list since the position of the projection planes of those views depends on the viewing direction When selecting that direction you need to take i
421. ton and the lt Alt gt key A user compact bar will be created It is automatically assigned to name Compact Bar N where N is the sequential number of the user compact bar The toolbars within User Compact bars cannot be activated by menu To extract a Toolbar from the User Compact bar drag the respective marker by the mouse outside the Compact bar area Setting up Property Bar Appearance You can customize various parameters of the Property Bar appearance of tags font of their labels etc in special dialog To call it use the Property Bar Appearance command in the bar s Context menu To set up the layout of individual interface items of the Property Bar without calling a dialog use the context menu commands Show Parameters Names Optimal set All Do not show and Page Tabs View Flat 3D KOMPAS 3D V9 User manual General system information KOMPAS 3D Document Types The type of a document created in KOMPAS 3D system depends on what kind of information is stored in that document Each document type is assigned its own file extension and icon Part is a model of a product made of a homogeneous material not requiring assembling A part file has the m3d extension Assembly a model of a product consisting of several parts with specified mutual situation An assembly can include other assemblies subassemblies and standard items An assembly file has the a3d extension Drawing the main type of a graphic d
422. ts field If when moving the cursor you reached a desired value of some parameter and want to fix it activate this parameter field by the appropriate key combination for example lt ALT gt lt A gt for a line inclination angle and then press the lt Enter gt key Releasing parameters To cancel fixing of a parameter value set the cursor in the switch next to the parameter field and click the left mouse button The indication of a canceled fixing is the absence of a cross on the respective switch Suppose when drawing a line the first point was created and then the length value was fixed equal to 60 mm After that upon any cursor movement only the line inclination angle changed If you now release the line length then you will be able again to vary either the inclination angle or the length In the course of building an object you can repeatedly fix and release its parameter values Activating parameters Some parameter values can only be typed from the keyboard that is defined explicitly or for graphical objects read from existing objects by means of the geometric calculator those include for example chamfer length or hatch angle Other parameter values can also be defined by fixing the cursor at a certain point within the document for example point coordinates start and end angles of an arc When defining a parameter belonging to the last group a check is displayed on the parameter s switch meaning that the para
423. ts were mated in such a way that a face of one of them was touching a cylindrical surface of another one The second component was then edited and it s a cylindrical face involved in the mate turned into a conical one Obviously due to this fact location on the second component should have changed Nevertheless it stayed in the old position To make the second component assume the position in which the existing mate Tangency of surfaces is not violated you need to rebuild the model Or for example an axis was constructed in the assembly passing through a component vertex The component was then relocated in such a way that the vertex position changed However the axis based on it stayed in the original place To make the axis assume the right position you need to rebuild the model In some cases the system automatically determines that the model needs a rebuild and outputs the respective prompt For example the prompt for rebuilding an assembly is displayed after returning from the component editing mode into the component containing assembly editing mode The dialog window lists the components whose editing caused disagreement in relations between objects in the assembly If you want to rebuild the assembly click the Yes button of the dialog As a result all objects will be rebuilt and or moved for their shape parameters and position to match the position of the reference objects and satisfy the applied mates If an assembly consists of a
424. tton This button is accessible if when selecting the method of group layers in a document the selected option was Group layers The filter position in the Tree will define the contents of the objects being filtered If a filter is created at the level of views the second level then filtering will be applied to the layers of the entire document If a filter is positioned inside a view the third level then it will be applied only to the layers of that view A filter cannot be created within a group After clicking the Create Filter button the Layer filter dialog will be displayed The dialog s interface items serve to set up the filter The text cursor will appear in the Filter Name field You can change the default filter name In the Conditions table you need to define the set of filtering conditions The Preview table contains the list of layers whose properties satisfy the filtering conditions Before at least one condition is created the list includes all layers of the filter s parent object The list of layers changes dynamically as filter conditions or filtered layer properties are modified 154 KOMPAS 3D V9 User manual To finish up building a filter click the OK button The dialog will be closed F The filter mark will appear in the Tree of Sheets Views and Layers A filter in the Tree of Sheets Views and Layers can be renamed by a standard Windows technique You can also edit the filtering conditi
425. ture in a usual way that is select the feature in the Model Tree and call the context menu command Edit Feature The Properties Bar will display the same controls as when creating the feature To change dimensions of a void you need to edit the value in the Scaling field FE When finished with editing the Boolean operation click the Create Object button on the Advanced Control Panel The part will rebuild according to the changes made Note When working in the part window including element created with union operation the only way to edit this element is delete it Changing the set of source parts You can change the set of parts used in a Boolean operation For this do the following 1 Using any of the available techniques open the assembly in whose context the feature to be edited was created 2 Select this feature in the Model Tree and call the context menu command Edit Feature 3 The system enters the editing mode of the part containing the selected feature and then the mode of editing the feature itself The Properties Bar will display the same controls as when creating the feature The list of parts will be shown that were used in the Boolean operation These parts are highlighted in the Model window and in the Model Tree 4 Edit the list by selecting parts in the Assembly window or in the Model Tree 5 Click the Create Object button on the Advanced Control Panel 124 KOMPAS 3D V9 User manual
426. u actually select the lists of allowed subsections in each BOM section besides other settings and parameters When setting up an existing BOM the list of subsections in each section can be modified if the division to subsections is not disabled in this BOM style to do this you do not need to change a BOM style When adding a new object you can specify not only the section but also a subsection to place it provided that the current section contains subsections lf objects are added in an arbitrary order by selecting subsections to which they belong then the BOM will arrange objects in each section by considering the order of subsections Subsection names are not displayed in the BOM form but just serve for the convenience of selecting a subsection Blocks of sections A BOM may contain nested and additional sections The nested sections are positioned within a section after all other objects of that section Additional sections are placed at the end of the BOM after all its sections Usually additional sections are placed starting from a new page Groups of nested and additional sections are respectively called blocks of nested sections and blocks of additional sections For example the Kits section of a simple BOM per GOST 2 106 96 may include the 234 KOMPAS 3D V9 User manual following blocks of nested sections v Fasteners kit v Replaceable parts kit vy Spare parts kit v Tools and appliance
427. ues are preserved Using the buttons on the toolbar or interface items in the fields of the List of Sheets Views and Layers define the combination of properties of the created group elements The properties will be assigned to the layers after applying the group x To delete a group activate it in the Tree of Sheets Views and Layers and click the Delete button Using Layer Properties Groups Using a group of layer properties allows assigning an individual combination of properties to each layer belonging to the group When activating a group in the Tree of Sheets Views and Layers first time after its creation the interface items in the fields of the List of Sheets Views and Layers will be reflecting the actual state of the group elements Layer properties can be different from a layer to a layer By using the buttons on the toolbar or by modifying layer property values directly in the fields of the List of Sheets Views and Layers define the state of visibility the property of being active and the color 153 KOMPAS 3D V9 User manual for each layer in the group You can select layers in a group to assign them same properties Note that you cannot change properties of the current layer A group of layer properties allows either a single current layer or none Note Later on when activating a group in the Tree the List of Sheets Views and Layers will display the assigned combination of properties The actual condition of lay
428. up 2 2 v Ventilation and hosing Subgroup 2 3 Each of the groups and subgroups contains all layers in a view The Technological Equipment group Subgroup 1 2 is set up so that after using it the layers only do in view will have the following properties v The layers displaying architectural structures will become background v The layers displaying ventilation and hosing systems will become hidden v The layers will become active that contain technological equipment v All layers will become hidden that contain objects at the mark 3 300 Therefore using groups of layers helps promptly set up the display of objects in a graphics document to perform current tasks according to the settings made in advance 152 KOMPAS 3D V9 User manual Layer properties will correspond to the settings only after applying a group of properties Since a group of layer properties is a combination of settings therefore the actual state of the layers included in its contents is not reflected in the group Adding a layer to the document does not make this layer automatically added to the group Creating a layer in a group adds a layer to a document Deleting a layer from a group doesn t make this layer deleted from the document Deleting a layer from a document makes it automatically deleted from a group Groups are named objects By default when a group is created it is assigned a name made up from the word Group and the sequential number This
429. urface The respective command buttons are located on the Surface toolbar td Imported Surface m Extrusion Surface A Revolution Surface H Swept Surface 4 Loft Surface 101 KOMPAS 3D V9 User manual Patch Once the surface import command is completed an icon or several icons of the imported surface appear in the Model Tree Imported surface icon Once the surface creation command is completed an icon appears in the Model Tree according to the created surface type m Extrusion surface icon g Revolved surface icon wz Swept surface icon Loft surface icon iy Patch icon Surface Operations When working in KOMPAS 3D you can delete one or several faces of a surface whether imported from an external file or created by system tools or a part The reverse operation is also available knitting several surfaces into one To perform the operations of face deletion and knitting surfaces you can call the appropriate commands from the group Operations Surface _ The respective command buttons are located on the Surface toolbar Tai Surfaces Knitting Em Delete Faces Upon completing the command of knitting surfaces or deleting a face an icon appears in the Model Tree which corresponds to the type of the completed operation JE Surfaces Knitting icon ei Deleted Faces icon Note Besides performing the mentioned operations you can create chamfers and fillets on the edges of surfaces just like on the edges of p
430. uture you will need to insert it again use the Management of Fragments command from the Edit menu Management of Fragments KOMPAS offers a variety of means to manage standard fragments inserted in the document editing deleting creating new local fragments etc All those operations can be performed in the dialog that is called by using the Management of Fragments command from the Edit menu 179 KOMPAS 3D V9 User manual The dialog displays the list of fragments inserted in the document Fragments are grouped by the type local embedded in the document inserted by an external link The appropriate information is displayed for each fragment creation and saved date the number of insertions in the document etc You can edit the previously defined name of the insert if needed To modify a fragment image select the fragment in the list and click the Edit button KOMPAS will open a new window in which the local fragment will be loaded for editing such as objects from the fragment taken from the file into the document or an external source file After finishing the editing and closing the fragment window the main document will be automatically updated To create a new local fragment stored directly in the main document click the Create New button You can make one or several new insertions of the fragment in the document To do this select the desired fragment in the list and click the Insert button To delet
431. ve as a path an edge spiral spline sketched contour or several connected lines curves Swept cut sketch requirements After calling the command the Property bar displays the controls to define operation parameters on the Options tab the section path and the section sweeping method on the Thin Wall tab the parameters of a thin wall sweep on the Cutting tab the construction result subtraction or intersection All parameter values once entered or modified immediately reflect on the ghost of the sweep feature displayed on the screen eal After defining all extrusion parameters click the Create Object button on the Advanced Control Panel to have the feature created The part with a swept cut feature or the part intersection with a sweep appears in the window while the icon of the cut feature appears in the Model Tree A Swept cut icon Loft Feature To cut a loft feature from a part call the command Operations Cut Loft or click the Cut Loft button on the Edit Part toolbar The Cut Loft command is available if the model already has the part base and at 78 KOMPAS 3D V9 User manual least two sketches not used by any other operation You do not have to select sketches before calling the command When creating a loft operation several sketches are used each of them represents one of the feature s sections Loft Cut sketch requirements After calling the command the Property bar displays
432. when editing a plane going through a vertex perpendicular to a face you cannot convert it into a tangent plane After calling the plan editing command its source element icons are shown in red in 109 KOMPAS 3D V9 User manual the Model Tree For example if a plane was going to an edge and a vertex the elements will be highlighted to which these edge and vertex belong if a plane was going through three vertices the elements are highlighted to which these vertices belong To change the set of source objects de highlight them by the mouse and pick new objects instead of the excluded ones Crer To confirm the changes click the Create Object button on the Advanced Control Panel to reject them the Interrupt Command button Note Many plane creating commands use the auto creation mode When editing such planes you do not need to confirm changes as those are accepted automatically Editing a point When you edit a point you can modify its coordinates select another reference point or turn off the associativity When the point editing command is called the coordinates are fixed on the Property bar the crosses are displayed on the switches X Z and Y If a point is edited that is linked to a reference object then the Associate option is enabled and the coordinate fields are inaccessible If you need to break a link disable the Associate option Keep in mind however that you will not be able to turn on
433. which changes are passed may not be loaded at the time of the synchronization in that case it will be opened changed saved and closed in the blind mode without being displayed on the screen When synchronizing the changes are also passed into the documents connected to BOM objects if that is necessary For example when connecting a parts drawing to an object the option Send Changes to Document was enabled later a part designation was modified in the BOM Then when synchronizing the new designation will not only go into the BOM object in an assembly drawing but also into the respective entry of the part s title block After completing the command the system will display the message about what drawings were modified Model document interaction with a BOM and a drawing When creating a model document BOM objects can be created within BOM items in models When creating associative model views parts or assemblies in a drawing the BOM objects from those models are passed into it The same three dimensional model can be used to create associative views in 232 KOMPAS 3D V9 User manual different drawings and therefore different drawings may contain the same BOM objects some of these drawings may also have other BOM objects within for example those created directly in those drawings All objects existing in the documents are normally placed in one BOM table in the slave mode or in the BOM document connected to th
434. which is less visual but universal and can be used when creating objects of any type You can combine any of the described methods of defining object parameters To edit an object means to modify one or several its parameters To switch to the editing mode double click the object with the mouse After that the Property Bar displays the same controls as when creating an object You can change any parameter by the above described methods After all object parameters are defined you need to confirm its creation or editing This can be done in one of the following ways v Click the Create Object button on the Advanced Control Panel v Call the Create Object command from the Editor menu or from the context menu v Press the key combination corresponding to the Create Object command by default lt Ctrl gt lt Enter gt An automatic creation capability is provided in most commands for creating graphical objects By default Auto Create is On 23 KOMPAS 3D V9 User manual Property Bar handling techniques Property bar may includes different controls fields for entering or selecting numerical values radio groups lists panes etc You work with interface items using familiar techniques activating radio switches entering values in editable fields and table cells selecting values from combo box lists or by stepper controls Additional working techniques are described in the sections that follow Activating parameters
435. will always have the correct ID number of the technical specifications item Links are emphasized in the document by a color v the acting link in blue ya broken link red Note The blue and red colors are used only to display links located in the current fragment layer or in the current layer of the current drawing view The links located on the other visible views and layers are not emphasized Those are displayed in the same colors as the rest of objects on these views and layers To print annotations containing links the colors are used that were defined by the print options Creating links To insert a link in a text object of the drawing use the Insert Link command After calling it the link creation dialog appears In it you need to set up the link parameters select the source and specify the link contents option When creating marking and stumping symbols the button to call the link creation dialog is also available on the Property bar and in the text input dialog Only one source type is available in the dialog brought up by this button the technical specifications When creating a geometric tolerance symbol the buttons to call the link creation dialog are available in the dialog for creating the geometric tolerance table Only one source type is available in the dialogs brought up by these buttons the datum symbol Editing and updating links You cannot arbitrarily change the contents of an existing working link it
436. will update accordingly For example to construct a thread on a rod with a chamfer you shall select the edge separating the cylindrical surface of the rod and the conical surface of the chamfer as the reference object and the rod end face as the initial border The options Automatic Diameter Determination and Along Whole Length control the nominal diameter value and the thread length respectively If these options are enabled then the diameter and length are determined automatically by the dimensions and position of objects selected to construct the thread The automatically calculated values of the thread diameter and length are displayed in the fields Thread Diameter and Thread Length respectively To define the thread diameter value manually disable Automatic Diameter Determination After that enter the appropriate value in the now accessible Thread Diameter field To define the thread length value manually disable Along Whole Length After that enter the appropriate value in the now accessible Thread Length field The Direction radio group is available if a round edge was selected in the command which separates two cylindrical or conical or a cylindrical and a conical faces To select one of these faces to construct a thread activate the desired switch The thread ghost will update on the screen 8 KOMPAS 3D V9 User manual When done with the setup click the Create Object button on the Advanced Control Pane
437. with the data from the model file Once an assembly model is developed you can automatically create its Parts List The generated Parts List maintains an associative relation with both the assembly model and the assembly drawing in particular the three dimensional model feeds to the Parts List the codes names and the number of components A drawing containing associative views of a three dimensional model is automatically assigned attributes with information about the model mass and material If a drawing contains images of several models then the information is entered in its attributes that refer to the model whose data appears in the title block of this drawing When synchronizing data in the drawing s title block with the data from the model file those attributes are updated Note An attribute containing information about the part material will be generated if the material for its creation was selected from Materials and Supplies Corporate Reference or the Materials and Supplies library 189 KOMPAS 3D V9 User manual For convenience of view management you can use the drawing s Design Three this is a graphically rendered history of creating the drawing views Design Three is displayed in a separate window which is always inside the drawing window The user can resize the Tree window by dragging its corners or borders by the mouse lf several windows are open with the same drawing then the Design Tree can be shown
438. wn cutout sketch expands beyond the limits of the base face then the dimple or drawn cutout is trimmed by the plane planes of the respective end face see figure end Face sketch To confirm the Drawn Cutout creation click the Create Object button on the Advanced Control Panel E a dimple will be created in the part and its icon in the Model Tree Drawn cutout command Serves to create a drawn cutout in a sheet part see figure Cutout Base sketch profile face The face containing the sketch of a dimple or drawn cutout is considered the base face The base face of a dimple or drawn cutout can be only an outer or inner flat face of a sheet body or sheet feature Dimple or drawn cutout sketch requirements Note In fact a drawn cutout creation is not a bending operation rather it is a deforming operation where the sheet material is stretched and its thickness reduced When performing the Drawn Cutout command this change in the material thickness is disregarded 70 KOMPAS 3D V9 User manual rg To call the command click the Drawn Cutout button on the Features of Sheet Body toolbar or pick it by the name from the menu Operations Features of Sheet Body The Drawn Cutout command is available if at least one sketch is selected The sheet feature ghost display is enabled by default and such ghost is displayed in the Model window with current parameters ed Specify the creation direction of a dimple or
439. y the system settings Help with the current action or active interface element is invoked by pressing the lt F1 gt key other types of Help via the Help menu group KOMPAS 3D V9 User manual Using Context Menu Commands for many frequently used operations can be called from the context menu These menus appear upon pressing the right mouse button Contents of the menu will be differentn different situations It will collect the most typical commands for this mode For example if several objects are selected in a document then right clicking the mouse button on one of them will bring up a menu with the following commands for processing those selected objects Cut Ctrl Copy Ctrl Insert Edit Explode Select Component Change Style Change Layer Order Switch to Object Layer SFOUDS Attributes Show Remove Constraints yee e Add PARTS LIST item Edit PARTS LIST item Thus when performing various actions one can quickly reach the necessary command not only by the Main Menu or Toolbars but also via the context menu the latter method being the quickest Customizing interface Main Menu and Toolbars settings You can change the composition of the Main menu and toolbars adding or deleting command calling buttons and customizing their display To do this call the command Service Customize Activate the Commands tab To add a command to a menu or to a toolbar select the category and command n
440. yer by choosing from list 1 Call the command Select Layer By Picking Up 2 The upcoming dialog displays the list of active layers Select the desired layer in the list and click the OK button All selected views objects will become highlighted Moving objects to another layer You can transfer various objects of a view or fragment to a different layer For this do the following 1 Select the objects to move to another layer All selected objects must be located in the same view which is not necessarily current at the moment 2 Call the command Change Layer from the context menu or from the Service menu In the layer selection dialog which appeared on the screen select the layer to 149 KOMPAS 3D V9 User manual which the selected objects should be transferred Transfer is available to the layer of the same type as the one to which the selected objects belong that is why in the dialog only layers of this type are listed 3 After choosing the layer to which the objects will be transferred click the OK button Note When moving objects to a background layer they become deselected To display these objects use the style defined for displaying background layers Objects moved to a hidden layer are not displayed on the screen To undo a mistaking object transfer from one layer to another click the Undo button lon the Standard bar after exiting the dialog Background layer display settings During worki
441. yle for pages of the current document call the command Service Options Current Text Document Document parameters Layout In the right part of the displayed dialog select layout styles for the first even and odd sheet By selecting the Additional Pages item in the same dialog you can set up the template for the additional pages of the text document Right after creating a text document its layout the frame and the title block does not appear on the screen since by default the document is displayed in the normal mode To show the title block select the Print Layout mode Move the cursor to the title block table A symbolic title block icon will appear EEAnext to it Double click the left mouse button The title block cells will become editable Enter all necessary data there The main text of the document becomes not editable again When filling in the title block you can use all capabilities of the KOMPAS 3D text editor Some cells such as Letter or Scale also support a user defined menu There is also a provision for automatic insertion of the number and name from the special dialog Note Editing certain cells for example Developed By Verified By Signed and Dated etc is prohibited These entries were defined at creation of tables that are part of a layout style Once done with filling the title block click the mouse outside the table or press the lt Ctrl gt lt Enter gt keys The main text of t

KOMPAS 3D V9

Contents

Download Pdf Manuals

Related Search

Related Contents