User Manual - bulls-i Vehicle Drive Recorders
Contents
1. We recommend that you purchase bulls i 8GB 16GB microSD cards from an authorized dealer Visit www bulls i com and navigate to Customer Center gt Notices gt bulls i 3GB 16GB microSD Card Retail Information Transcend class 10 microSD cards are also compatible Supports HD and SDHC X microSD Card Warranty 6 months Safety Warnings and Precautions GPS Use If you are using the product for the first time or using it after an extended period of nonuse 3 days or longer it will take longer than usual for the GPS to determine your Current location GPS signal strength is susceptible to weather conditions rain fog etc and radio wave interference The ideal ambient temperature range for the GPS receiver is O C 60 C 32 F 140 F Maintain this temperature range inside the vehicle especially during sum mer and winter months GPS reception may be low underneath an overpass inside a tunnel or with a high density of buildings nearby The GPS receiver may not function properly in vehicles with special coating or tint ing on the windshield or equipped with electromagnetic wave generating devices on board GPS reception may be low or unavailable altogether near high rise buildings or power cables due to the effects of high voltage With poor GPS reception it may take longer to determine the current location if the vehicle is moving Time and speed displays may not function properly in GPS shadow zones and under poor GPS rec2. 3 Other Circumstances Malfunctions caused by natural disasters fire salt water lightening damage etc Expired parts and accessories attachments Use of an unstable power supply against which impulse voltage cannot offer protection The product is covered under warranty for a period of one year Consumer Damage Compensation During Warranty Period After Warranty Period Need for critical repair within 10 days of purchase Replacement Need for critical repair within 1 month of purchase Replacement Product damage that arose during transportation or installation Replacement Not applicable bad Replacement malfunctions arising Replacement not available Refund under normal use gt during the warranty Can be Malfunction with the same root cause occurs 3 times Replacement Paid servicing period repaired Malfunctions with different root causes occur 5 times Replacement Paid servicing Replacement Repair not possible because of parts unavailability Replacement Pease i aC r following deductionot Required parts are available but the repair cannot be performed Replacement Malfunctions caused Cannot be repaired Product replacement following deduction Product replacement following deduction of paid by consumer of paid servicing fee Servicing fee and depreciation value negligence Can be repaired Paid servicing Paid servicing Refund Purch
3. Out Settings gt Foarmat SD e This option formats the microSD card inserted into bulls i SD Format f f Sp d e Ese Qe SD Card SD Card SD Card format format formatting completed Format Formats the card 2 Formatting in Progress Once formatting is com Cancel Cancels format plete bulls i will reboot ting A Do not remove the micro SD card while formatting is in progress 32 4 Video Out 4 3 Warnings and Cautions A Sy CHECK SD Card When a microSD card is missing or a microSD card error has occurred rN Do not remove SD Card When upgrading firmware f Q gt RECORDING stop RECORDING restarted When switching to a Resuming recording different mode Format SD card once a month When it s time to format the microSD card Once a month 33 5 1 Program Installation The viewer lets you play back recorded video on a computer bulls i Setup X Choose Components Choose which features of bulls you want to install Check the components you want to install and uncheck the components you don t want to install Click Next to continue Select components to install bulls4 Player IV FFDShow MPEG 4 install iv bulls Suite v Start Menu Shortcuts Space required 39 1MB next gt cancel 1 Uncompress the downloaded file and double click setup exe To downloa
4. e Specifications of this product are subject to change without prior notice pw 46 6 Product Specifications and Certifications 6 2 Product Certifications IC KCC Broadcasting communications device certification C C CE European certification for industrial safety and quality FE FCC U S Federal Communications Commission certification RoHS Restriction of Hazardous Substances Directive RoH compliant 47 If you are having trouble with this product please check the following troubleshooting information before requesting servicing Contact the customer center only if the problem persists after imple menting the measures described below Problem Video recordings are not being saved to the microSD card The bulls i is unable to read the memory card What happens if the microSD card becomes full The bulls i is not working 48 Solution Format the microSD card and try again If the microSD card is old expired replace it with a new one Existing recording data are overwritten with new data starting with the oldest Check to see if the protective film has been re moved from the camera lens Check to see if the camera lens is dirty Check to see if the windshield is dirty or has ob stacles such as dark tinting Check the power connection Check to see if you are using an original power cable from the manufacturer Regarding product servicing e In compliance wi
5. light up o reset press the OK key If not press the CLR key Press and hold the UP key for 5 seconds LEDs above the OK and CLR keys light up o reset press the OK key If not press the CLR key Press and hold the DOWN key for 5 seconds LEDs above the OK and CLR keys light up o reset press the OK key If not press the CLR key 3 3 microSD Memory Card Removal Always remove the microSD card from the slot in the following order 1 Shut off the ignition and then hold the unit s power button for 3 seconds to turn it off Alternatively you can unplug the power cable from the unit or the cigarette jack 2 Push down on the microSD card Once the card pops out remove it from the slot A Removing the microSD card while the black box is turned on will cause data corruption 29 Connect the video cable to a GPS navigation unit or an external AV device Once bulls i is powered on it Once the bulls i finishes boot Once the vehicle s ignition is 1 will take 10 to 15 seconds for 2 ing up it will automatically 3 turned off it will take 10 to 15 the unit to boot up enter Continuous Recording seconds for bulls i to save the Blue LED flashes mode Home Screen recording file and turn off Blue LED lights up All LEDs turned off steadily A NA Video Out is not supported in Parking mode 26 4 1 2 Event Recording Live View gt Event Recording Screen Event recordin
6. to Park ing Mode automatically if using a constant power source 21 Recording is automatically triggered in the event of an impact detection Blue and Red LEDs On Buzzer 2 beeps 3 1 3 Manual Recording Press the power button to start recording Blue and Red LEDs On Buzzer 2 beeps Porte a An ae a waa avra vc MM MEM c ELM oU se PG In Event Recording it records a total of 20 seconds per event 5 seconds prior to the event and 15 seconds after the event Recording time may Event Occurrence vary depending on image quality and resolution settings _ Pre Recording 5 seconds 4 7 aA Post Recording 15 seconds 22 3 1 4 Parking Mode Recording If connected to a constant power source the bulls i automatically begins recording Security LED Flashes in Parking mode Security LED Steadily lit while recording in Parking mode Values configured under Settings during video out or using the Dedicated Viewer apply to Parking mode recordings Continuous and impact recording ee EDDPPPPidipesesssssssssssssasasesssssesosossssssssesesecsesscossssesasesssecsesssossssesaseossecsesscosessesescossesesecoosesssssessssssessoossssssseosessccesssosessssssossssceccoososessoseoc Motion and impact recording Impact recording 23 3 2 Reset 3 2 1 Resetting Wi Fi Data 24 Press and hold the SPK CLR key for 5 seconds LEDs above the OK and CLR keys
7. use when parked Impact Sensitivity Used to adjust the impact detection sensitivity Format microSD Formats the microSD card Card 29 4 2 2 1 Functions Settings gt Speaker 3 2 3 2 Adjust the buzzer and voice guide volume bulls i oY emu REC Muting the speaker volume turns off the speaker LED Settings gt Audio Recording bulls i oQ REC Microphone Microphone Activates deactivates audio recording via the MIC Setting this option to turns on the MIC LED 30 Settings gt Image Quality Normal Parking Settings gt Impact Sensitivity sensitivity Resolution Motion Parking sensitivity Shock Parking sensitivity Specify the recording image resolution 1080p Full HD 120p HD Parking recording is activated automatically when the ignition is turned off There are 3 Park ing modes to choose from Motion Detection Parking Mode This is the default setting Recording automatically starts when motion or change in the lighting condition is detected Continuous Parking Mode Constantly records video while the vehicle is parked Impact Parking Mode Recording automatically starts when impact is detected J In order to maximize the microSD card s SA recording capacity we recommend you use the Motion Detection Parking mode Used to adjust the impact detection sensitivity Recom mended Setting Medium 31 4 Video
8. ED Parking Mode O Speaker LED Turns on when the speaker is turned on Q MIC LED Turns on when audio recording is turned on e Images used in this manual may differ from the actual product e Accessories offered by the manufacturer as part of the product package may change without prior notice p V 1 2 Mount Used to attach and detach the bulls i to the Mount der vehicle Adjust the angle and tighten the screw to set in place Double Sided Tape Used to attach the mount to the front windshield e Mount Angle Adjuster 17 2 1 Precautions e Make sure you have all the parts and accessories before installing the bulls i B Page 11 e f you are missing parts or accessories contact your place of purchase The bulls i s position on the front windshield and its forward facing angle greatly affect the video recording quality Follow these instructions to get the best results e nstall the mount on the central axis of the vehicle e Do not use the bulls i without the mount e Do not place any item between the bulls i and the front windshield or cover up the bulls i e Secure the mount in place using the double sided tape However make sure the windshield area where you will be attaching the mount to is free of dust and other forms of contaminants 18 2 2 bulls i Installation Check the installation site and have everything in place Refer to page 2 for ins
9. ase Price must present receipt About the Serial Number The serial number identifies individual products and it is important that you do not misplace it The manufacturer assumes no responsibility for any loss or damage resulting from misplacement of the serial number Vehicle Drive Recorder Date ofPuchase anme OSS Mode ETK B2400 PmeofPudwe e ooo O 49 Orr Fu T 1 HD re Ji TI ion ETK B2400 compliant MADE IN KOREA
10. ate audio recording Adjust the buzzer and voice guide volume Used to set the black box s system clock You can retrieve and use the computer s system time settings Make sure the computer s time setting is correct Subtracts 1 hour from the clock during the specified period Use if DST is in effect in your area The clock will be adjusted automatically on the specified starting date Used to select your time zone Adjust the impact detection sensitivity Specify the number of event files to keep on the memory card Used to adjust the motion detection sensitivity for Parking mode Specify when you want the Battery Protection feature to be activated Specify the black box s speed unit Enable disable security LED while parked Select the viewer s display language Specify the speed unit displayed on the viewer 5 10 Clock Time Time Setting 2013 02 14 14 29 23 Get Current Time Q ostsetting m E I ine Format P GMT Setting GMT Eus 12 Hr Used to set the unit s clock Select Retrieve Time to use the computer s system clock settings 43 5 11 Time Zone Configuration Used to select your time zone g8 GMT Setting 12 11 16 9 S es a v MES UN UTC 09 00 Seoul 5 12 microSD Card Folders Folder Name Description e Contains Continuous and Parking inc motion detection recording files Continuous Recording 1 minute files Motion Detection Parking Mode 20 second file
11. bulls LJf MC OM f 1 Full H D resolution ETK B2400 User Manual Safety Warnings and Precautions Scope of Warranty and Liabilities This product is a road safety accessory and the manufacturer is not liable for any losses brought on by malfunctions loss of data or any other forms of losses from using this product This product is an accessory designed for the specific purpose of recording and saving captured video footage of the areas near the vehicle Certain functions may not be supported depending on the driving conditions and vehicle conditions The firmware updates for improving perfor mance may result in different performance by each product The video may not be recorded depending on the conditions in which the device is used Please use the device only for your reference The recording may not take place depending on the status of the microSD card This device is designed to capture and save accident footages of the vehicle in which the prod uct is installed in However it does not guarantee that every accident footage will be recorded Accidents with very minor level of impact may not activate the impact sensor and the accident may not be recorded as an event footage In vehicles that use smart keys the batteries may discharge while in Parking Mode Please read the following warnings and cautions thoroughly These warnings and cautions were made for the safety of the users and to prevent any potential damage caused b
12. d the program visit www bulls i com and navigate to Downloads Installing Please wait while bulls is being installed Extract QtWebKit4 dll 100 Ether Technology Inc Once the program is installed click Close 34 p 35 bulls i Setup Le me Install Location Choose the folder in which to install bulls3i Setup will install bulls in the following folder To install in a different folder dick Browse and select another folder Click Install to start the installation Destination Folder WProgram Files WBulls Browse Space required 39 1MB Space available 85 9GB Ether Technology Inc lt Back _ _ install Cancel Designate the installation folder and click Install bulls i bulls i Suite Viewer A launch icon will appear on the desktop bulls i Viewer Viewer bulls i Suite Launcher bulls i Suite Connect microSD Card to the Computer Launching the Program Insert the micro SD card into the reader and Double click on the launcher icon on the then plug in the reader to your computer s desktop USB port A SA Make sure the micro SD card is right side up when inserting it into the reader ES I amp O 9 pune 3013 Sti 0 29 22 49 32 Program launcher will appear on the screen The viewer and the launcher operate in conjunction with one another 35 5 3 Using
13. ecorder A mse Adapter microSD Card adapter included Mount Cable Clips gr Z CZ 5 Power Cable Plug in or Wire in User Manual e Images used in this manual may differ from the actual product e Accessories offered by the manufacturer as part of the product package may change without prior notice CE microSD Card Reader Double sided Tape 11 X Available for purchase at www bulls i com e mages used in this manual may differ from the actual product 12 Table of Contents Safety Warnings and Precautions Main Features Accessories Table of Contents 1 Overview 1 1 bulls i 1 2 Mount 2 Installation 2 1 Precautions 2 2 bulls i Installation 3 Using the bulls i Vehicle Drive Recorder 3 1 Recording 3 2 Reset 3 3 microSD Memory Card Removal 4 Video Out 4 1 Video Out Connection 4 2 Recording Playback and Settings 4 3 Warnings and Cautions 11 13 14 14 17 18 18 19 21 21 24 25 26 26 28 33 5 Using the Dedicated Viewer 5 1 Program Installation 5 2 Launching the Program 5 3 Using the Launcher 5 4 Dedicated Viewer 5 5 Dedicated Viewer Controls 5 6 Open File 5 7 Route Display GPS 5 8 Miscellaneous Features 5 9 Program Settings 5 10 Clock 5 11 Time Zone Configuration 5 12 microSD Card Folders 5 13 Upgrading Firmware 6 Product Specifications and Certifications 6 1 Product Specifications 6 2 Product Certifications 7 Troubl
14. eption conditions Main Features 1080P PARKING PARKING Full HD Video e 1920 x 1080 Full HD e Video Compression H 264 Highly Sensitive GPS Receiver sold sepa rately Uses incoming GPS signals to indicate the current location speed and route on Google Maps Security LED e Security LED activation in Parking Mode Parking Mode e Starts recording when motion or impact is detected while the vehicle is parked Voice Guidance e Voice responses for greater ease of use Wi Fi Smartphone Connectivity e View real time video feeds play back recordings configure settings receive alerts report accidents and GPS track using your smartphone Video Out e View real time video feeds and change the settings on exter nal AV devices such as a GPS navigation unit Battery Protection e Prevents the batteries from completely discharging while in Parking Mode Main Features Wide Recording Angle Constant Power e 140 Recording Angle Triaxial e Automatically activates Parking Mode when ignition is shut off 3 Axis Acceleration microSD Formatting Shock Detection e Format the microSD directly from the bulls i Sensor Sb e Shock Detector with Adjustable Sensitivity 2 DC 12V to 24V Event Recording Continuous Recording Manual Recording micro SD gob ol Upgrade via microSD Overwriting Audio Recording Settings Card On Off Accessories bulls i Vehicle Drive R
15. eshooting 8 Warranty 34 34 35 36 87 38 40 40 41 42 43 44 44 45 46 46 47 48 49 13 1 1 bulls i Slot for microSD cards l gi 55 Memory Card e Slot e 2 Power Jack npa for the power cable o ET M Donge Por for the Wi Fi dongle E Ue Spes Eis audio ails and Tapai rga TODO GPG CADIS o buzzer warnings and voice guides 0 4 Video IN T for the video cable o6 8 LED Ta eel e Images used in this manual may differ from the actual product e Accessories offered by the manufacturer as part of the product package may change without prior notice p S 14 bulls i o 2 Power Power on off hold for 3 seconds Manual recording Rec normal press Speaker on off Wi Fi data reset hold for 5 seconds and select OK yes o UP A DIS GOCGIIGENDLIORDO EDS Folder navigation and file selection microSD card formatting hold for 5 seconds and Folder navigation and file selection Select OK yes e Images used in this manual may differ from the actual product e Accessories offered by the manufacturer as part of the product package may change without prior notice 15 bulls i oc 90 0 O 66 d Name Function O PowerLED Flashes during power up and stay itwhenpoweredon ooo Qu eee mas d M j ie A ASAE E A EET TO Flashes while in Parking Mode and stays lit when recording is in progress while in o Seu L
16. g message will appear in the event of an impact detection while in Live View mode Blue and Red LEDs On Buzzer 2 beeps Press the power button to start manual recording Blue and Red LEDs On Buzzer 2 beeps pw Sy Continuous and Event impact recording is not supported while in menu mode 27 4 2 Recording Playback and Settings 4 2 1 Recording Playback under development Press and hold the Press the OK key Select a file from the Selected file is OK key to enter the to access the video video list and press played on the menu mode playback menu the OK key screen Dee re tee eee ESS Se eee eee eee EEE ETE cee esses esses asseeeee esses sss sesssssesesss eS EES EEEESEEEEEEEE ESSE EE EEEESEEE EEE ESE SEDO EEEEEEEEEEEE ESSE EE EEEEESESEEEEEEESSEEEEEEEESE SEES ESSE EE EEEESEEEEE EEE ES OOOO EEEEHES SEES EEEES List of Event recordings pw SS N Menu mode will automatically switch over to Continuous Recording screen after 10 seconds of inactivity Menu mode cannot be accessed while Event recording is in progress 28 4 Video Out 4 2 2 Settings MENU PLAYLIST Q Playback Press and hold the OK key to enter the menu mode Press the OK key to access the settings menu Speaker Activates deactivates buzzer warnings and voice guides Sound Recording Activates deactivates audio recording via the MIC Image Quality Specify the recording image resolution Parking Specify the recording mode to
17. held responsible in the event of microSD card dam age due to user negligence or external factors X We recommend using bulls i models ETK XX GB microSD cards Causes of microSD Card Damage and Data Corruption e External impact during installation uninstallation e Abnormal disruption in power supply such as sudden disconnection of the power cable while the black box is in use can damage the microSD card e External impact on the product while it is in operation can also cause data corrup tion or damage the microSD card itself To minimize loss and damage brought on by microSD card damage regularly check and back up your data Safety Warnings and Precautions A Caution Format the microSD card once a month A microSD Card Use microSD cards have a service life When the card you are using reaches the end of its service life check the card for damage and replace it with a new unit The actual service life of a given microSD card varies depending on the actual use and care of the card microSD Card Recording Capacity Guide Recording Quality High cod son 1 ooa xo 4GB 1 hrs to 8GB 2 hrs to 16GB 3hrs 30 mins 32GB 6 hrs 30 mins 1 hrs 30 mins 2 hrs 30 mins to 4 hrs to 7 hrs X This product has been designed as a road safety accessory The manufacturer will not be held liable whatsoever in the event of an accident while using this product Please use this product for intended purposes only Recommended microSD Cards
18. ous Features Full Screen Right clicking on the playback screen displays it in full screen mode 41 5 Using the Dedicated Viewer 5 9 Program Settings Gsm rive IE o 3 Video amp Sound lm Resolution Full HD amp HD amp VGA H video Quality Low Middle High kf Video Frame Rate Low Middle High amp Video 8 Sound Recording off amp one Audio a Sound Volume Off Low amp Middle High amp Time Time setting Ml Get Current Time Q ost Setting Ml 101 01 0000 _ f 01 01 0000 _ lt 4 Time Format amp P cwrsetig 77 Gwr 2 e we Functions X6 Shock Sensitivity Low e Middle High amp DR Event Files 10 20 amp 40 3 Parking Watch eid Shock amp Motion Time Motion Sensitivity Low amp Middle amp High amp L Battery Prevention 119V 120v 121v 122v 123v Speed Unit KM H amp MPH X Security LED off On Viewer The below items will only affect the viewer display 2 Language Speed Unit KM H MPH bulls_i Ver 2 2 Function Viewer Settings 42 Resolution Video Quality Video Frame Rate Sound Recording Sound Volume Time Setting DTS Setting GMT Setting Shock Sensi tivity Event Files Motion Sensi tivity Battery Pre vention Speed Unit Security LED Language Speed Unit Specify the resolution you wish to use Adjust the video recording quality Choose the frame rate Activate deactiv
19. s Continuous Parking 1 minute files e g Continuous 20120412_111535_l avi Parking 20120412_111535_Pavi e Contains Event Manual and Parking Event recording files Event Impact Recording 20 second files 10 to 40 files by default Parking Event 20 second files e g Continuous Event 20120412 111535 l avi Parking Event 20120412 111535 Pavi Used for updating the firmware Also contains a text txt file that indicates the current firmware version 44 5 13 Upgrading Firmware 1 2 3 4 5 Connect the microSD card to the computer Create an update folder on the microSD card Copy the firmware files to the update folder Insert the microSD card into the bulls i and reconnect the power cable The firmware will be upgraded automatically and the bulls i will reboot 7 e Do not forcibly turn off the bulls i or remove the microSD card while firmware update is in progress It could cause the system to malfunction e The microSD card s file system must be set to FAT16 or FAT32 Other system formats including NTFS are not supported 45 ry Camera Continuous Manual Recording Event Parking Speed Location Google Map DC 12V to 24V 200mA Super Capacitor Voice Guide Supported e his products firmware is upgradeable Firmware updates may improve the prod uct s performance and are available for download at the manufacturer s website www bulls i com
20. tallation precau tions This device must be installed on the central axis of the vehicle and on the upper portion of the windshield in order to achieve optimal recording performance clean piece of cloth the strip of double sided tape windshield 1 Clean the windshield using a 2 Remove the protective film from 3 Attach the mount flush to the attached to the mount way inside the bulls i s microSD 4 Insert the microSD card all the 5 Attach the bulls i to the mount card slot until it clicks in 19 Connect the power cable to the Insert the other end of the Use the included cable clips to units PWR IN port power cable into the vehicle s hide loose cables power outlet e The unit generates warning messages if the microSD card is not recognized audio message and LED e Contact a professional installer if you wish to use the constant power source cable Black GND White ACC Red BAT B e f you are not using GPS you can set the clock using the PC viewer 20 3 1 Recording 3 1 1 Powering On and Continuous Recording bulls i oco m 1 Turn the unit on The blue LED will flash bulls i i oc Start recording ii The unit generates warning messages audio message and LED The unit begins Continuous Recording once the LED lights up steadily bulls i End recording Shut off the ignition and the unit will turn off after 10 to 20 seconds of data parsing Switches
21. th consumer compensation rules and regulations Ether Technology Inc offers the following warranty coverage for this product e lf you experience a malfunction and require servicing contact the nearest Ether Technology Inc bulls i product retailer e Visit www bulls i com for the bulls for warrenty coverage and details Covered Malfunctions arising under normal use within the warranty period 1 year are eligible Warranty period for products used for commercial purposes however is half that of the normal warranty period 6 months Paid Servicing 1 Non Malfunctions Once a servicing request is made the consumers will be charged with a servicing fee if the concerned issue is found to be a non malfunction It is therefore important that you read this user manual carefully before making any servicing request limited to cases where repairing is not possible and is subject to separate standards 2 Malfunctions due to Consumer Negligence Malfunctions caused by disassembly or modification of the product by the consumer at their own discretion or due to consumer negligence submersion in water damage etc Malfunctions arising from repair of the product by an individual who is not a technician from Ether Technology Inc or one of its authorized affiliates Malfunctions arising from use of unauthorized parts and or accessories Malfunctions arising from failure to adhere to the Safety Warnings and Precautions contained in the user manual
22. the Launcher AM Description PPP Viewer Analysis Program Card e Website Link Link to the bulls i website J In order to use Google Maps you will S need to have Internet access and In ternet Explorer 7 0 or above installed on your system e The map feature may not function properly with files that are missing GPS data due to poor signal recep tion at the time of their recording e The map feature is only available when the GPS module optional is connected to the unit 3 axis Sensor Sen sor Readings e Used to select and open a file for playback 5 5 Dedicated Viewer Controls Captures and saves a screenshot of the video png or jpg sesesssssssssssesesssssssssssosssesssssssssssosssseessssssssoossssssosssssssoscesesssssssssssssccocscosesssssosossesessssssssssssssssossssssssocoososessssossssscssssssossssssescossssessssssoosccssesssoossessseseooosssssssoscscssssssoocssessesescocoo Prints the current frame 38 5 5 Dedicated Viewer Controls p DES DIDI Vertically flips the video 39 5 6 Open File J Click on the button and select a file 5 7 Route Display GPS Displays the route taken on a map using GPS data S e This feature is available with models that have the GPS module installed only e his feature is only available with an Internet connection 40 5 Using the Dedicated Viewer 5 8 Miscellane
23. vironment for an extended period of time Damage to the product may occur and lead to malfunctions When installing the product make sure it does not impede with the op eration of other onboard devices such as the airbag system Impeding the operation of other onboard devices can lead to an injury Do not place beverages chemicals or other potentially harmful items near the product It can damage the product and lead to malfunctions 3 When installing the product make sure it does not obstruct the driver s field of view Obstructing the driver s field of view can lead to driver distraction Recommended location for mounting the product the upper portion of the front windshield along the central axis of the vehicle Do not expose the product to the direct heat of the vehicles heating system or other heat generating ap pliance Exposure to high heat can cause damage to the product and lead to malfunctions Maintain the ambient temperature to between 0 C and 50 C 32 F and 122 F Temperatures outside this range can lower the performance or damage the product and lead to malfunctions Do not power off the product abruptly or operate it in an abnormal manner Doing so can damage the microSD card and the product Safety Warnings and Precautions D amp Do not touch the product with greasy or wet hands It can damage the product and lead to malfunctions Protect the product from hea
24. vy impact It can damage the product and lead to malfunctions Do not place the product near a magnet a CRT TV or any other item emitting a strong magnetic field It can damage the product and lead to malfunctions Remove any sunshade film or any other material obstructing the view It may hinder the quality of images recorded Use approved SD memory cards only Failure to comply can lead to data loss on the SD memory card C9 8 Do not put anything inside the exter nal microSD memory card slot except for the card itself It can damage the product and lead to malfunctions Do not operate the product with sharp instruments such as a pen or pencil It can damage the product and lead to malfunctions Do not attach a sticker or apply paint on the device or the microSD card It can damage the product or microSD card and lead to malfunctions Do not take the microSD card out during operation This can damage the product and any data on the microSD card Replace old SD memory cards Prolonged usage of the microSD memory card can lead to data loss Safety Warnings and Precautions Data Loss Corruption microSD Card Care Damage to the microSD card can result in data corruption or loss e microSD card is a highly sensitive piece of technology that can become defective due to changes in external environment or severe impact Protect the card against impact and damage e The manufacturer will not be
25. y improper use Cy Do not operate the product while driving Operating the product while driving can lead to driver distractions If you need to operate the product do so after pulling over to a safe location Do not cover or place anything on the product allow for ventilation It can damage the product and lead to a malfunction Do not use the product if it is mal functioning In the event of a malfunction disconnect the power supply and contact your place of purchase Do not disassemble or modify the product Unauthorized disassembly or modifications of the product can cause product malfunctions These malfunctions are not covered under the product warranty Do not operate the product if it has been exposed to debris If foreign debris has got on the product disconnect the power and clean thoroughly with a soft cloth Note Use caution if using cleaning solvents Only use properly rated fuses for the power outlet When you need to replace the fuse make sure to use a correctly rated fuse Using a fuse with an incorrect rating can cause a fire Safety Warnings and Precautions Y Zs If you need to replace the power cable mount or any other part use original parts offered by the manufac turer only The consumer is responsible for all malfunctions and accidents resulting from use of unauthorized parts Do not expose the product to mois ture or store it under a highly humid en
Download Pdf Manuals
Related Search